-
CCAT: Detector Noise Limited Performance of the RFSoC-based Readout Electronics for mm/sub-mm/far-IR KIDs
Authors:
Adrian K. Sinclair,
James Burgoyne,
Anthony I. Huber,
Colin Murphy,
Steve K. Choi,
Cody J. Duell,
Zachary B. Huber,
Yaqiong Li,
Scott C. Chapman,
Michael D. Niemack,
Thomas Nikola,
Eve M. Vavagiakis,
Samantha Walker,
Jordan D. Wheeler,
Jason Austermann,
Lawrence Lin,
Ruixuan Xie,
Bugao Zou,
Philip D. Mauskopf
Abstract:
The Fred Young Submillimeter Telescope (FYST), on Cerro Chajnantor in the Atacama desert of Chile, will conduct wide-field and small deep-field surveys of the sky with more than 100,000 detectors on the Prime-Cam instrument. Kinetic inductance detectors (KIDs) were chosen as the primary sensor technology for their high density focal plane packing. Additionally, they benefit from low cost, ease of…
▽ More
The Fred Young Submillimeter Telescope (FYST), on Cerro Chajnantor in the Atacama desert of Chile, will conduct wide-field and small deep-field surveys of the sky with more than 100,000 detectors on the Prime-Cam instrument. Kinetic inductance detectors (KIDs) were chosen as the primary sensor technology for their high density focal plane packing. Additionally, they benefit from low cost, ease of fabrication, and simplified cryogenic readout, which are all beneficial for successful deployment at scale. The cryogenic multiplexing complexity is pulled out of the cryostat and is instead pushed into the digital signal processing of the room temperature electronics. Using the Xilinx Radio Frequency System on a Chip (RFSoC), a highly multiplexed KID readout was developed for the first light Prime-Cam and commissioning Mod-Cam instruments. We report on the performance of the RFSoC-based readout with multiple detector arrays in various cryogenic setups. Specifically we demonstrate detector noise limited performance of the RFSoC-based readout under the expected optical loading conditions.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
CCAT: Comparisons of 280 GHz TiN and Al Kinetic Inductance Detector Arrays
Authors:
Cody J. Duell,
Jason Austermann,
James Beall,
James R. Burgoyne,
Scott C. Chapman,
Steve K. Choi,
Rodrigo G. Freundt,
Jiansong Gao,
Christopher Groppi,
Anthony I. Huber,
Zachary B. Huber,
Johannes Hubmayr,
Ben Keller,
Yaqiong Li,
Lawrence T. Lin,
Justin Matthewson,
Philip Mauskopf,
Alicia Middleton,
Colin C. Murphy,
Michael D. Niemack,
Thomas Nikola,
Adrian K. Sinclair,
Ema Smith,
Jeff van Lanen,
Anna Vaskuri
, et al. (5 additional authors not shown)
Abstract:
The CCAT Collaboration's six-meter Fred Young Submillimeter Telescope is scheduled to begin observing in the Chilean Atacama in 2025, targeting a variety of science goals throughout cosmic history. Prime-Cam is a 1.8-meter diameter cryostat that will host up to seven independent instrument modules designed for simultaneous spectroscopic and broadband, polarimetric surveys at millimeter to submilli…
▽ More
The CCAT Collaboration's six-meter Fred Young Submillimeter Telescope is scheduled to begin observing in the Chilean Atacama in 2025, targeting a variety of science goals throughout cosmic history. Prime-Cam is a 1.8-meter diameter cryostat that will host up to seven independent instrument modules designed for simultaneous spectroscopic and broadband, polarimetric surveys at millimeter to submillimeter wavelengths. The first of these instrument modules, the 280 GHz module, will include ${\sim}$10,000 kinetic inductance detectors (KIDs) across three arrays. While the first array was fabricated out of tri-layer TiN/Ti/TiN, the other two arrays were fabricated out of a single layer of Al. This combination of materials within the same instrument provides a unique opportunity to directly compare the performance and noise properties of two different detector materials that are seeing increasing use within the field. We present preliminary comparisons here based on lab testing, along with a discussion of the potential impacts on operation when observing and translating raw data to science-grade maps.
△ Less
Submitted 10 June, 2024;
originally announced June 2024.
-
CCAT-prime: The Optical Design for the Epoch of Reionization Spectrometer
Authors:
Zachary B. Huber,
Steve K. Choi,
Cody J. Duell,
Rodrigo G. Freundt,
Patricio A. Gallardo,
Ben Keller,
Yaqiong Li,
Lawrence T. Lin,
Michael D. Niemack,
Thomas Nikola,
Dominik A. Riechers,
Gordon Stacey,
Eve M. Vavagiakis,
Bugao Zou
Abstract:
The Epoch of Reionization Spectrometer (EoR-Spec) will be an instrument module for the Prime-Cam receiver on the CCAT-prime Collaboration's Fred Young Submillimeter Telescope (FYST), a 6-m primary mirror Crossed Dragone telescope. With its Fabry-Perot interferometer (FPI), EoR-Spec will step through frequencies between 210 and 420 GHz to perform line intensity map** of the 158 $μ$m [CII] line in…
▽ More
The Epoch of Reionization Spectrometer (EoR-Spec) will be an instrument module for the Prime-Cam receiver on the CCAT-prime Collaboration's Fred Young Submillimeter Telescope (FYST), a 6-m primary mirror Crossed Dragone telescope. With its Fabry-Perot interferometer (FPI), EoR-Spec will step through frequencies between 210 and 420 GHz to perform line intensity map** of the 158 $μ$m [CII] line in aggregates of star-forming galaxies between redshifts of 3.5 and 8 to trace the evolution of structure in the universe during the epoch of reionization. Here we present the optical design of the module including studies of the optical quality and other key parameters at the image surface. In order to achieve the required resolving power (R$\sim$100) with the FPI, it is important to have a highly collimated beam at the Lyot stop of the system; the optimization process to achieve this goal with four lenses instead of three as used in other Prime-Cam modules is outlined. As part of the optimization, we test the effect of replacing some of the aspheric lenses with biconic lenses in this Crossed Dragone design and find that the biconic lenses tend to improve the image quality across the focal plane of the module.
△ Less
Submitted 19 August, 2022;
originally announced August 2022.
-
CCAT-prime: Design of the Mod-Cam receiver and 280 GHz MKID instrument module
Authors:
Eve M. Vavagiakis,
Cody J. Duell,
Jason Austermann,
James Beall,
Tanay Bhandarkar,
Scott C. Chapman,
Steve K. Choi,
Gabriele Coppi,
Simon Dicker,
Mark Devlin,
Rodrigo G. Freundt,
Jiansong Gao,
Christopher Groppi,
Terry L. Herter,
Zachary B. Huber,
Johannes Hubmayr,
Doug Johnstone,
Ben Keller,
Anna M. Kofman,
Yaqiong Li,
Philip Mauskopf,
Jeff McMahon,
Jenna Moore,
Colin C. Murphy,
Michael D. Niemack
, et al. (11 additional authors not shown)
Abstract:
Mod-Cam is a first light and commissioning instrument for the CCAT-prime project's six-meter aperture Fred Young Submillimeter Telescope (FYST), currently under construction at 5600 m on Cerro Chajnantor in Chile's Atacama Desert. Prime-Cam, a first-generation science instrument for FYST, will deliver over ten times greater map** speed than current and near-term facilities for unprecedented 280-…
▽ More
Mod-Cam is a first light and commissioning instrument for the CCAT-prime project's six-meter aperture Fred Young Submillimeter Telescope (FYST), currently under construction at 5600 m on Cerro Chajnantor in Chile's Atacama Desert. Prime-Cam, a first-generation science instrument for FYST, will deliver over ten times greater map** speed than current and near-term facilities for unprecedented 280-850 GHz broadband and spectroscopic measurements with microwave kinetic inductance detectors (MKIDs). CCAT-prime will address a suite of science goals, from Big Bang cosmology to star formation and galaxy evolution over cosmic time. Mod-Cam deployment on FYST with a 280 GHz instrument module containing MKID arrays is planned for early science observations in 2024. Mod-Cam will be used to test instrument modules for Prime-Cam, which can house up to seven instrument modules. We discuss the design and status of the 0.9 m diameter, 1.8 m long Mod-Cam receiver and 40 cm diameter 280 GHz instrument module, with cold stages at 40 K, 4 K, 1 K, and 100 mK. We also describe the instrument module's cryogenic readout designs to enable the readout of more than 10,000 MKIDs across 18 networks.
△ Less
Submitted 10 August, 2022;
originally announced August 2022.
-
CCAT-prime: The Design and Characterization of the Silicon Mirrors for the Fabry-Perot Interferometer in the Epoch of Reionization Spectrometer
Authors:
Bugao Zou,
Steve K. Choi,
Nicholas F. Cothard,
Rodrigo Freundt,
Zachary B. Huber,
Yaqiong Li,
Michael D. Niemack,
Thomas Nikola,
Dominik A. Riechers,
Kayla M. Rossi,
Gordon J. Stacey,
Eve M. Vavagiakis,
the CCAT-prime collaboration
Abstract:
The Epoch of Reionization Spectrometer (EoR-Spec) is one of the instrument modules to be installed in the Prime-Cam receiver of the Fred Young Submillimeter Telescope (FYST). This six-meter aperture telescope will be built on Cerro Chajnantor in the Atacama Desert in Chile. EoR-Spec is designed to probe early star-forming regions by measuring the [CII] fine-structure lines between redshift z = 3.5…
▽ More
The Epoch of Reionization Spectrometer (EoR-Spec) is one of the instrument modules to be installed in the Prime-Cam receiver of the Fred Young Submillimeter Telescope (FYST). This six-meter aperture telescope will be built on Cerro Chajnantor in the Atacama Desert in Chile. EoR-Spec is designed to probe early star-forming regions by measuring the [CII] fine-structure lines between redshift z = 3.5 and z = 8 using the line intensity map** technique. The module is equipped with a scanning Fabry-Perot interferometer (FPI) to achieve the spectral resolving power of about RP = 100. The FPI consists of two parallel and identical, highly reflective mirrors with a clear aperture of 14 cm, forming a resonating cavity called etalon. The mirrors are silicon-based and patterned with double-layer metamaterial anti-reflection coatings (ARC) on one side and metal mesh reflectors on the other. The double-layer ARCs ensure a low reflectance at one substrate surface and help tailor the reflectance profile over the FPI bandwidth. Here we present the design, fabrication processes, test setup, and characterization of silicon mirrors for the FPI.
△ Less
Submitted 17 July, 2022;
originally announced July 2022.
-
CCAT-prime Collaboration: Science Goals and Forecasts with Prime-Cam on the Fred Young Submillimeter Telescope
Authors:
CCAT-Prime collaboration,
M. Aravena,
J. E. Austermann,
K. Basu,
N. Battaglia,
B. Beringue,
F. Bertoldi,
F. Bigiel,
J. R. Bond,
P. C. Breysse,
C. Broughton,
R. Bustos,
S. C. Chapman,
M. Charmetant,
S. K. Choi,
D. T. Chung,
S. E. Clark,
N. F. Cothard,
A. T. Crites,
A. Dev,
K. Douglas,
C. J. Duell,
R. Dunner,
H. Ebina,
J. Erler
, et al. (62 additional authors not shown)
Abstract:
We present a detailed overview of the science goals and predictions for the Prime-Cam direct detection camera/spectrometer being constructed by the CCAT-prime collaboration for dedicated use on the Fred Young Submillimeter Telescope (FYST). The FYST is a wide-field, 6-m aperture submillimeter telescope being built (first light in mid-2024) by an international consortium of institutions led by Corn…
▽ More
We present a detailed overview of the science goals and predictions for the Prime-Cam direct detection camera/spectrometer being constructed by the CCAT-prime collaboration for dedicated use on the Fred Young Submillimeter Telescope (FYST). The FYST is a wide-field, 6-m aperture submillimeter telescope being built (first light in mid-2024) by an international consortium of institutions led by Cornell University and sited at more than 5600 meters on Cerro Chajnantor in northern Chile. Prime-Cam is one of two instruments planned for FYST and will provide unprecedented spectroscopic and broadband measurement capabilities to address important astrophysical questions ranging from Big Bang cosmology through reionization and the formation of the first galaxies to star formation within our own Milky Way galaxy. Prime-Cam on the FYST will have a map** speed that is over ten times greater than existing and near-term facilities for high-redshift science and broadband polarimetric imaging at frequencies above 300 GHz. We describe details of the science program enabled by this system and our preliminary survey strategies.
△ Less
Submitted 8 August, 2022; v1 submitted 21 July, 2021;
originally announced July 2021.
-
CCAT-prime: Designs and status of the first light 280 GHz MKID array and Mod-Cam receiver
Authors:
Cody J. Duell,
Eve M. Vavagiakis,
Jason Austermann,
Scott C. Chapman,
Steve K. Choi,
Nicholas F. Cothard,
Brad Dober,
Patricio Gallardo,
Jiansong Gao,
Christopher Groppi,
Terry L. Herter,
Gordon J. Stacey,
Zachary Huber,
Johannes Hubmayr,
Doug Johnstone,
Yaqiong Li,
Philip Mauskopf,
Jeff McMahon,
Michael D. Niemack,
Thomas Nikola,
Kayla Rossi,
Sara Simon,
Adrian K. Sinclair,
Michael Vissers,
Jordan Wheeler
, et al. (1 additional authors not shown)
Abstract:
The CCAT-prime project's first light array will be deployed in Mod-Cam, a single-module testbed and first light cryostat, on the Fred Young Submillimeter Telescope (FYST) in Chile's high Atacama desert in late 2022. FYST is a six-meter aperture telescope being built on Cerro Chajnantor at an elevation of 5600 meters to observe at millimeter and submillimeter wavelengths.1 Mod-Cam will pave the way…
▽ More
The CCAT-prime project's first light array will be deployed in Mod-Cam, a single-module testbed and first light cryostat, on the Fred Young Submillimeter Telescope (FYST) in Chile's high Atacama desert in late 2022. FYST is a six-meter aperture telescope being built on Cerro Chajnantor at an elevation of 5600 meters to observe at millimeter and submillimeter wavelengths.1 Mod-Cam will pave the way for Prime-Cam, the primary first generation instrument, which will house up to seven instrument modules to simultaneously observe the sky and study a diverse set of science goals from monitoring protostars to probing distant galaxy clusters and characterizing the cosmic microwave background (CMB). At least one feedhorn-coupled array of microwave kinetic inductance detectors (MKIDs) centered on 280 GHz will be included in Mod-Cam at first light, with additional instrument modules to be deployed along with Prime-Cam in stages. The first 280 GHz detector array was fabricated by the Quantum Sensors Group at NIST in Boulder, CO and includes 3,456 polarization-sensitive MKIDs. Current mechanical designs allow for up to three hexagonal arrays to be placed in each single instrument module. We present details on this first light detector array, including mechanical designs and cold readout plans, as well as introducing Mod-Cam as both a testbed and predecessor to Prime-Cam.
△ Less
Submitted 13 January, 2021; v1 submitted 18 December, 2020;
originally announced December 2020.
-
The Design of The CCAT-prime Epoch of Reionization Spectrometer Instrument
Authors:
Nicholas F Cothard,
Steve K Choi,
Cody J Duell,
Terry Herter,
Johannes Hubmayr,
Jeff McMahon,
Michael D Niemack,
Thomas Nikola,
Carlos Sierra,
Gordon J Stacey,
Eve M Vavagiakis,
Edward J Wollack,
Bugao Zou
Abstract:
The Epoch of Reionization Spectrometer (EoR-Spec) is an instrument module for the Prime-Cam receiver of the 6 m aperture CCAT-prime Telescope at 5600 m in Chile. EoR-Spec will perform 158 $μ$m [CII] line intensity map** of star-forming regions at redshifts between 3.5 and 8 (420 - 210 GHz), tracing the evolution of structure during early galaxy formation. At lower redshifts, EoR-Spec will observ…
▽ More
The Epoch of Reionization Spectrometer (EoR-Spec) is an instrument module for the Prime-Cam receiver of the 6 m aperture CCAT-prime Telescope at 5600 m in Chile. EoR-Spec will perform 158 $μ$m [CII] line intensity map** of star-forming regions at redshifts between 3.5 and 8 (420 - 210 GHz), tracing the evolution of structure during early galaxy formation. At lower redshifts, EoR-Spec will observe galaxies near the period of peak star formation - when most stars in today's universe were formed. At higher redshifts, EoR-Spec will trace the late stages of reionization, the early stages of galaxy assembly, and the formation of large-scale, three-dimensional clustering of star-forming galaxies. To achieve its science goals, EoR-Spec will utilize CCAT-prime's exceptionally low water vapor site, large field of view ($\sim 5$ degrees at 210 GHz), and narrow beam widths ($\sim 1$ arcminute at 210 GHz). EoR-Spec will be outfitted with a cryogenic, metamaterial, silicon substrate-based Fabry-Perot Interferometer operating at a resolving power ($λ/Δλ$) of 100. Monolithic dichroic arrays of cryogenic, feedhorn-coupled transition edge sensor bolometers provide approximately 6000 detectors, which are read out using a frequency division multiplexing system based on microwave SQUIDs. The novel design allows the measurement of the [CII] line at two redshifts simultaneously using dichroic pixels and two orders of the Fabry-Perot. Here we present the design and science goals of EoR-Spec, with emphasis on the spectrometer, detector array, and readout designs.
△ Less
Submitted 26 November, 2019;
originally announced November 2019.
-
The CCAT-Prime Submillimeter Observatory
Authors:
Manuel Aravena,
Jason Austermann,
Kaustuv Basu,
Nicholas Battaglia,
Benjamin Beringue,
Frank Bertoldi,
J. Richard Bond,
Patrick Breysse,
Ricardo Bustos,
Scott Chapman,
Steve Choi,
Dongwoo Chung,
Nicholas Cothard,
Bradley Dober,
Cody Duell,
Shannon Duff,
Rolando Dunner,
Jens Erler,
Michel Fich,
Laura Fissel,
Simon Foreman,
Patricio Gallardo,
Jiansong Gao,
Riccardo Giovanelli,
Urs Graf
, et al. (31 additional authors not shown)
Abstract:
The Cerro Chajnantor Atacama Telescope-prime (CCAT-prime) is a new 6-m, off-axis, low-emissivity, large field-of-view submillimeter telescope scheduled for first light in the last quarter of 2021. In summary, (a) CCAT-prime uniquely combines a large field-of-view (up to 8-deg), low emissivity telescope (< 2%) and excellent atmospheric transmission (5600-m site) to achieve unprecedented survey capa…
▽ More
The Cerro Chajnantor Atacama Telescope-prime (CCAT-prime) is a new 6-m, off-axis, low-emissivity, large field-of-view submillimeter telescope scheduled for first light in the last quarter of 2021. In summary, (a) CCAT-prime uniquely combines a large field-of-view (up to 8-deg), low emissivity telescope (< 2%) and excellent atmospheric transmission (5600-m site) to achieve unprecedented survey capability in the submillimeter. (b) Over five years, CCAT-prime first generation science will address the physics of star formation, galaxy evolution, and galaxy cluster formation; probe the re-ionization of the Universe; improve constraints on new particle species; and provide for improved removal of dust foregrounds to aid the search for primordial gravitational waves. (c) The Observatory is being built with non-federal funds (~ \$40M in private and international investments). Public funding is needed for instrumentation (~ \$8M) and operations (\$1-2M/yr). In return, the community will be able to participate in survey planning and gain access to curated data sets. (d) For second generation science, CCAT-prime will be uniquely positioned to contribute high-frequency capabilities to the next generation of CMB surveys in partnership with the CMB-S4 and/or the Simons Observatory projects or revolutionize wide-field, sub-millimetter line intensity map** surveys.
△ Less
Submitted 5 September, 2019;
originally announced September 2019.
