-
Long period modulation of the classical T Tauri star CI Tau: evidence for an eccentric close-in massive planet at 0.17 au
Authors:
R. Manick,
A. P. Sousa,
J. Bouvier,
J. M. Almenara,
L. Rebull,
A. Bayo,
A. Carmona,
E. Martioli,
L. Venuti,
G. Pantolmos,
Á. Kóspál,
C. Zanni,
X. Bonfils,
C. Moutou,
X. Delfosse,
the SLS consortium
Abstract:
Detecting planets within protoplanetary disks around young stars is essential for understanding planet formation and evolution. However, planet detection using the radial velocity method faces challenges due to strong stellar activity in these early stages. We aim to detect long-term periodicities in photometric and spectroscopic time series of the classical T Tauri star (CTTS) CI Tau, and retriev…
▽ More
Detecting planets within protoplanetary disks around young stars is essential for understanding planet formation and evolution. However, planet detection using the radial velocity method faces challenges due to strong stellar activity in these early stages. We aim to detect long-term periodicities in photometric and spectroscopic time series of the classical T Tauri star (CTTS) CI Tau, and retrieve evidence for inner embedded planets in its disk. The study conducted photometric and spectroscopic analyses using K2 and Las Cumbres Observatory Global Network light curves, and high-resolution spectra from ESPaDOnS and SPIRou. We focus our radial velocity analysis on a wavelength domain less affected by spot activity. To account for spot effects, a quasi-periodic Gaussian process model was applied to K2 light curve, ESPaDOnS, and SPIRou radial velocity data. Additionally, a detailed bisector analysis on cross-correlation functions was carried out to understand the cause of long-term periodicity. We detect coherent periods at $\sim$ 6.6 d, 9 d, $\sim$ 11.5 d, $\sim$ 14.2 d and $\sim$ 25.2 d, the latter is seen consistently across all datasets. Bisector analysis of the cross-correlation functions provides strong hints for combined activity-induced and Doppler reflex signal in the radial velocities at a period of 25.2 d. Our analysis suggests that this periodicity is best explained by the presence of a 3.6$\pm$0.3 M$_{Jup}$, eccentric (e$\sim$0.58) planet at a semi-major axis of 0.17 au. Our study outlines the difficulty of searching for disk-embedded planets in the inner 0.1 au's of young and active systems. We demonstrate that, when searching for planets in actively accreting stars such as CI Tau, the primary limitation is stellar activity rather than the precision of RV measurements provided by the instrument.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Numerical simulations of MHD jets from Keplerian accretion disks I-Recollimation shocks
Authors:
Thomas Jannaud,
Claudio Zanni,
Jonathan Ferreira
Abstract:
Aims. We wish to establish a firm link between jet simulations and analytical studies of magnetically-driven steady-state jets from Keplerian accretion disks. In particular, the latter have predicted the existence of recollimation shocks due to the dominant hoop-stress, so far never observed in platform simulations.
Methods. We perform a set of axisymmetric MHD simulations of non-relativistic je…
▽ More
Aims. We wish to establish a firm link between jet simulations and analytical studies of magnetically-driven steady-state jets from Keplerian accretion disks. In particular, the latter have predicted the existence of recollimation shocks due to the dominant hoop-stress, so far never observed in platform simulations.
Methods. We perform a set of axisymmetric MHD simulations of non-relativistic jets using the PLUTO code. The simulations are designed to reproduce the boundary conditions generally expected in analytical studies. We vary two parameters: the magnetic flux radial exponent $α$ and the jet mass load $κ$. In order to reach the huge unprecedented spatial scales implied by the analytical solutions, a new method allowing to boost the temporal evolution has been used.
Results. We confirm the existence of standing recollimation shocks at large distances, behaving qualitatively with the mass load $κ$ as in self-similar studies. The shocks are weak and correspond to oblique shocks in a moderately high fast-magnetosonic flow. The jet emitted from the disk is focused towards the axial inner spine, which is the outflow connected to the central objet. The presence of this spine is shown to have a strong influence on jet asymptotics.
Conclusions. Internal recollimation shocks may produce observable features such as standing knots of enhanced emission and a decrease of the flow rotation rate. However, more realistic simulations, e.g. fully three-dimensional, must be done in order to investigate non-axisymmetric instabilities and with ejection only from a finite zone in the disk, so as to to verify whether these MHD recollimation shocks and their properties are maintained.
△ Less
Submitted 26 October, 2022;
originally announced October 2022.
-
Magnetic Braking of Accreting T Tauri Stars II: Torque Formulation Spanning Spin-Up and Spin-Down Regimes
Authors:
Lewis G. Ireland,
Sean P. Matt,
Claudio Zanni
Abstract:
The magnetic interaction between a classical T Tauri star and its surrounding accretion disk is thought to influence its rotational evolution. We use 2.5D magnetohydrodynamic, axisymmetric simulations of star-disk interaction, computed via the PLUTO code, to calculate the net torque acting on these stars. We divide the net torque into three contributions: accretion (spin-up), stellar winds (spin-d…
▽ More
The magnetic interaction between a classical T Tauri star and its surrounding accretion disk is thought to influence its rotational evolution. We use 2.5D magnetohydrodynamic, axisymmetric simulations of star-disk interaction, computed via the PLUTO code, to calculate the net torque acting on these stars. We divide the net torque into three contributions: accretion (spin-up), stellar winds (spin-down), and magnetospheric ejections (MEs) (spin-up or down). In Paper I, we explored interaction regimes in which the stellar magnetosphere truncates the inner disk at a location spinning faster than the star, resulting in a strong net spin-up contribution from accretion and MEs ("steady accretion" regime). In this paper, we investigate interaction regimes in which the truncation radius gets closer to and even exceeds corotation, where it is possible for the disk material to gain angular momentum and be periodically ejected by the centrifugal barrier ("propeller" regime). This reduces the accretion torque, can change the sign of the ME torque, and can result in a net stellar spin-down configuration. These results suggest it is possible to have a net spin-down stellar torque even for truncation radii within the corotation radius ($R_\text{t} \gtrsim 0.7 R_\text{co}$). We fit semi-analytic functions for the truncation radius, and the torque associated with star-disk interaction (i.e., the sum of accretion and ME torques) and stellar wind, allowing for the prediction of the net stellar torque for a parameter regime covering both net spin-up and spin-down configurations, as well as the possibility of investigating rotational evolution via 1D stellar evolution codes.
△ Less
Submitted 1 March, 2022;
originally announced March 2022.
-
Effect of Differential Rotation on Magnetic Braking of Low-Mass and Solar-Like Stars: A Proof-of-Concept Study
Authors:
Lewis G. Ireland,
Sean P. Matt,
Charlie R. Davey,
Owain L. Harris,
Tobias W. Slade-Harajda,
Adam J. Finley,
Claudio Zanni
Abstract:
On the main sequence, low-mass and solar-like stars are observed to spin-down over time, and magnetized stellar winds are thought to be predominantly responsible for this significant angular momentum loss. Previous studies have demonstrated that the wind torque can be predicted via formulations dependent on stellar properties, such as magnetic field strength and geometry, stellar radius and mass,…
▽ More
On the main sequence, low-mass and solar-like stars are observed to spin-down over time, and magnetized stellar winds are thought to be predominantly responsible for this significant angular momentum loss. Previous studies have demonstrated that the wind torque can be predicted via formulations dependent on stellar properties, such as magnetic field strength and geometry, stellar radius and mass, wind mass-loss rate, and stellar rotation rate. Although these stars are observed to experience surface differential rotation, torque formulations so far have assumed solid-body rotation. Surface differential rotation is expected to affect the rotation of the wind and thus the angular momentum loss. To investigate how differential rotation affects the torque, we use the PLUTO code to perform 2.5D magnetohydrodynamic, axisymmetric simulations of stellar winds, using a colatitude-dependent surface differential rotation profile that is solar-like (i.e., rotation is slower at the poles than the equator). We demonstrate that the torque is determined by the average rotation rate in the wind, so that the net torque is less than that predicted by assuming solid-body rotation at the equatorial rate. The magnitude of the effect is essentially proportional to the magnitude of the surface differential rotation, for example, resulting in a torque for the Sun that is $\sim 20 \%$ smaller than predicted by the solid-body assumption. We derive and fit a semi-analytic formulation that predicts the torque as a function of the equatorial spin rate, magnitude of differential rotation, and wind magnetization (depending on the dipolar magnetic field strength and mass-loss rate, combined).
△ Less
Submitted 23 November, 2021; v1 submitted 22 November, 2021;
originally announced November 2021.
-
Magnetic braking of accreting T Tauri stars: Effects of mass accretion rate, rotation, and dipolar field strength
Authors:
Lewis G. Ireland,
Claudio Zanni,
Sean P. Matt,
George Pantolmos
Abstract:
The rotational evolution of accreting pre-main-sequence stars is influenced by its magnetic interaction with its surrounding circumstellar disk. Using the PLUTO code, we perform 2.5D magnetohydrodynamic, axisymmetric, time-dependent simulations of star-disk interaction---with an initial dipolar magnetic field structure, and a viscous and resistive accretion disk---in order to model the three mecha…
▽ More
The rotational evolution of accreting pre-main-sequence stars is influenced by its magnetic interaction with its surrounding circumstellar disk. Using the PLUTO code, we perform 2.5D magnetohydrodynamic, axisymmetric, time-dependent simulations of star-disk interaction---with an initial dipolar magnetic field structure, and a viscous and resistive accretion disk---in order to model the three mechanisms that contribute to the net stellar torque: accretion flow, stellar wind, and magnetospheric ejections (periodic inflation and reconnection events). We investigate how changes in the stellar magnetic field strength, rotation rate, and mass accretion rate (changing the initial disk density) affect the net stellar torque. All simulations are in a net spin-up regime. We fit semi-analytic functions for the three stellar torque contributions, allowing for the prediction of the net stellar torque for our parameter regime, and the possibility of investigating spin-evolution using 1D stellar evolution codes. The presence of an accretion disk appears to increase the efficiency of stellar torques compared to isolated stars, for cases with outflow rates much smaller than accretion rates, because the star-disk interaction opens more of the stellar magnetic flux compared to that from isolated stars. In our parameter regime, a stellar wind with a mass loss rate of $\approx 1 \%$ of the mass accretion rate is capable of extracting $\lesssim 50 \%$ of the accreting angular momentum. These simulations suggest that achieving spin-equilibrium in a representative T Tauri case within our parameter regime, e.g., BP Tau, would require a wind mass loss rate of $\approx 25\%$ of the mass accretion rate.
△ Less
Submitted 2 November, 2020;
originally announced November 2020.
-
Magnetic torques on T Tauri stars: accreting vs. non-accreting systems
Authors:
G. Pantolmos,
C. Zanni,
J. Bouvier
Abstract:
Classical T Tauri stars (CTTs) magnetically interact with their surrounding disks, a process that is thought to regulate their rotational evolution. In this work, we compute torques acting onto the stellar surface of CTTs arising from different accreting (accretion funnels) and ejecting (stellar winds and magnetospheric ejections) flow components. Furthermore, we compare the magnetic braking due t…
▽ More
Classical T Tauri stars (CTTs) magnetically interact with their surrounding disks, a process that is thought to regulate their rotational evolution. In this work, we compute torques acting onto the stellar surface of CTTs arising from different accreting (accretion funnels) and ejecting (stellar winds and magnetospheric ejections) flow components. Furthermore, we compare the magnetic braking due to stellar winds in two different systems: isolated and accreting stars. 2.5D magnetohydrodynamic, time-dependent, axisymmetric simulations are employed. For both systems the stellar wind is thermally driven. In the star-disk-interaction (SDI) simulations the accretion disk is Keplerian, viscous, and resistive. Two series of simulations are presented, one for each system. We find that in classical T Tauri systems the presence of magnetospheric ejections confines the stellar-wind expansion, resulting in an hourglass-shaped geometry of the outflow. In addition, the formation of the accretion columns modifies the amount of open magnetic flux exploited by the stellar wind. These effects have a strong impact on the stellar wind properties and we show that the stellar-wind braking is more efficient in the star-disk-interacting systems than in the isolated ones. We also derive torque scalings, over a wide range of magnetic field strengths, for each flow component in a SDI system that directly applies a torque on the stellar surface. In all the performed SDI simulations the stellar wind extracts less than 2% of the mass accretion rate and the disk is truncated up to 66% of the corotation radius. All the simulations show a net spin-up torque. In order to achieve a stellar-spin equilibrium we need either more massive stellar winds or disks being truncated closer to the corotation radius, which increases the torque efficiency by the magnetospheric ejections.
△ Less
Submitted 2 September, 2020;
originally announced September 2020.
-
Rotational evolution of solar-type protostars during the star-disk interaction phase
Authors:
Florian Gallet,
Claudio Zanni,
Louis Amard
Abstract:
The early pre-main sequence phase during which they are still likely surrounded by an accretion disk represents a puzzling stage of the rotational evolution of solar-mass stars. While they are still accreting and contracting they do not seem to spin-up substantially. It is usually assumed that the magnetospheric star-disk interaction tends to maintain the stellar rotation period constant (disklock…
▽ More
The early pre-main sequence phase during which they are still likely surrounded by an accretion disk represents a puzzling stage of the rotational evolution of solar-mass stars. While they are still accreting and contracting they do not seem to spin-up substantially. It is usually assumed that the magnetospheric star-disk interaction tends to maintain the stellar rotation period constant (disklocking), but this hypothesis has never been thoroughly verified. Our aim is to investigate the impact of the star-disk interaction mechanism on the stellar spin evolution during the accreting pre-main sequence phases. We devise a model for the torques acting onto the stellar envelope based on studies of stellar winds and develop a new prescription for the star-disk coupling grounded on numerical simulations of star-disk interaction and magnetospheric ejections. We then use this torque model to follow the long-term evolution of the stellar rotation. Magnetospheric ejections and accretion powered stellar winds play an important role in the spin evolution of solar-type stars. However, kG dipolar magnetic fields are not uncommon but not ubiquitous. Besides, it is unclear how massive stellar winds can be powered, while numerical models of the propeller regime display a strong variability that has no observational confirmation. Better observational statistics and more realistic models could contribute to soften our calculations' requirements.
△ Less
Submitted 18 October, 2019; v1 submitted 9 October, 2019;
originally announced October 2019.
-
Angular momentum evolution of young low-mass stars and brown dwarfs: observations and theory
Authors:
J. Bouvier,
S. P. Matt,
S. Mohanty,
A. Scholz,
K. G. Stassun,
C. Zanni
Abstract:
This chapter aims at providing the most complete review of both the emerging concepts and the latest observational results regarding the angular momentum evolution of young low-mass stars and brown dwarfs. In the time since Protostars & Planets V, there have been major developments in the availability of rotation period measurements at multiple ages and in different star-forming environments that…
▽ More
This chapter aims at providing the most complete review of both the emerging concepts and the latest observational results regarding the angular momentum evolution of young low-mass stars and brown dwarfs. In the time since Protostars & Planets V, there have been major developments in the availability of rotation period measurements at multiple ages and in different star-forming environments that are essential for testing theory. In parallel, substantial theoretical developments have been carried out in the last few years, including the physics of the star-disk interaction, numerical simulations of stellar winds, and the investigation of angular momentum transport processes in stellar interiors. This chapter reviews both the recent observational and theoretical advances that prompted the development of renewed angular momentum evolution models for cool stars and brown dwarfs. While the main observational trends of the rotational history of low mass objects seem to be accounted for by these new models, a number of critical open issues remain that are outlined in this review.
△ Less
Submitted 30 September, 2013;
originally announced September 2013.
-
MHD simulations of accretion onto a dipolar magnetosphere. II. Magnetospheric ejections and stellar spin-down
Authors:
Claudio Zanni,
Jonathan Ferreira
Abstract:
This paper examines the outflows associated with the interaction of a stellar magnetosphere with an accretion disk. In particular, we investigate the magnetospheric ejections (MEs) due to the expansion and reconnection of the field lines connecting the star with the disk. Our aim is to study the dynamical properties of the outflows and evaluate their impact on the angular momentum evolution of you…
▽ More
This paper examines the outflows associated with the interaction of a stellar magnetosphere with an accretion disk. In particular, we investigate the magnetospheric ejections (MEs) due to the expansion and reconnection of the field lines connecting the star with the disk. Our aim is to study the dynamical properties of the outflows and evaluate their impact on the angular momentum evolution of young protostars. Our models are based on axisymmetric time-dependent magneto-hydrodynamic simulations of the interaction of the dipolar magnetosphere of a rotating protostar with a viscous and resistive disk, using alpha prescriptions for the transport coefficients. Our simulations are designed in order to model: the accretion process and the formation of accretion funnels; the periodic inflation/reconnection of the magnetosphere and the associated MEs; the stellar wind. Similarly to a magnetic slingshot, MEs can be powered by the rotation of both the disk and the star so that they can efficiently remove angular momentum from both. Depending on the accretion rate, MEs can extract a relevant fraction of the accretion torque and, together with a weak but non-negligible stellar wind torque, can balance the spin-up due to accretion. When the disk truncation approaches the corotation radius, the system enters a "propeller" regime, where the torques exerted by the disk and the MEs can even balance the spin-up due to the stellar contraction. The MEs spin-down efficiency can be compared to other scenarios, such as the Ghosh & Lamb, X-wind or stellar wind models. Nevertheless, for all scenarios, an efficient spin-down torque requires a rather strong dipolar component, which has been seldom observed in classical T Tauri stars. A better analysis of the torques acting on the protostar must take into account non-axisymmetric and multipolar magnetic components consistent with observations.
△ Less
Submitted 20 November, 2012;
originally announced November 2012.
-
The PLUTO Code for Adaptive Mesh Computations in Astrophysical Fluid Dynamics
Authors:
A. Mignone,
C. Zanni,
P. Tzeferacos,
B. van Straalen,
P. Colella,
G. Bodo
Abstract:
We present a description of the adaptive mesh refinement (AMR) implementation of the PLUTO code for solving the equations of classical and special relativistic magnetohydrodynamics (MHD and RMHD). The current release exploits, in addition to the static grid version of the code, the distributed infrastructure of the CHOMBO library for multidimensional parallel computations over block-structured, ad…
▽ More
We present a description of the adaptive mesh refinement (AMR) implementation of the PLUTO code for solving the equations of classical and special relativistic magnetohydrodynamics (MHD and RMHD). The current release exploits, in addition to the static grid version of the code, the distributed infrastructure of the CHOMBO library for multidimensional parallel computations over block-structured, adaptively refined grids. We employ a conservative finite-volume approach where primary flow quantities are discretized at the cell-center in a dimensionally unsplit fashion using the Corner Transport Upwind (CTU) method. Time step** relies on a characteristic tracing step where piecewise parabolic method (PPM), weighted essentially non-oscillatory (WENO) or slope-limited linear interpolation schemes can be handily adopted. A characteristic decomposition-free version of the scheme is also illustrated. The solenoidal condition of the magnetic field is enforced by augmenting the equations with a generalized Lagrange multiplier (GLM) providing propagation and dam** of divergence errors through a mixed hyperbolic/parabolic explicit cleaning step. Among the novel features, we describe an extension of the scheme to include non-ideal dissipative processes such as viscosity, resistivity and anisotropic thermal conduction without operator splitting. Finally, we illustrate an efficient treatment of point-local, potentially stiff source terms over hierarchical nested grids by taking advantage of the adaptivity in time. Several multidimensional benchmarks and applications to problems of astrophysical relevance assess the potentiality of the AMR version of PLUTO in resolving flow features separated by large spatial and temporal disparities.
△ Less
Submitted 5 October, 2011; v1 submitted 4 October, 2011;
originally announced October 2011.
-
Observational limits on the spin-down torque of Accretion Powered Stellar Winds
Authors:
C. Zanni,
J. Ferreira
Abstract:
The rotation period of classical T Tauri stars (CTTS) represents a longstanding puzzle. While young low-mass stars show a wide range of rotation periods, many CTTS are slow rotators, spinning at a small fraction of break-up, and their rotation period does not seem to shorten, despite the fact that they are actively accreting and contracting. Matt & Pudritz (2005) proposed that the spin-down torque…
▽ More
The rotation period of classical T Tauri stars (CTTS) represents a longstanding puzzle. While young low-mass stars show a wide range of rotation periods, many CTTS are slow rotators, spinning at a small fraction of break-up, and their rotation period does not seem to shorten, despite the fact that they are actively accreting and contracting. Matt & Pudritz (2005) proposed that the spin-down torque of a stellar wind powered by a fraction of the accretion energy would be strong enough to balance the spin-up torque due to accretion. Since this model establishes a direct relation between accretion and ejection, the observable stellar parameters (mass, radius, rotation period, magnetic field) and the accretion diagnostics (accretion shock luminosity), can be used to constraint the wind characteristics. In particular, since the accretion energy powers both the stellar wind and the shock emission, we show in this letter how the accretion shock luminosity L_UV can provide upper limits to the spin-down efficiency of the stellar wind. It is found that luminous sources with L_UV > 0.1 L_Sun and typical dipolar field components < 1 kG do not allow spin equilibrium solutions. Lower luminosity stars (L_UV < 0.1 L_Sun) are compatible with a zero-torque condition, but the corresponding stellar winds are still very demanding in terms of mass and energy flux. We therefore conclude that accretion powered stellar winds are unlikely to be the sole mechanism to provide an efficient spin-down torque for accreting classical T Tauri stars.
△ Less
Submitted 15 December, 2010;
originally announced December 2010.
-
Large scale magnetic fields in viscous resistive accretion disks. I. Ejection from weakly magnetized disks
Authors:
Gareth C. Murphy,
Jonathan Ferreira,
Claudio Zanni
Abstract:
Cold steady-state disk wind theory from near Keplerian accretion disks requires a large scale magnetic field at near equipartition strength. However the minimum magnetization has never been tested. We investigate the time evolution of an accretion disk threaded by a weak vertical magnetic field. The strength of the field is such that the disk magnetization falls off rapidly with radius. Four 2.5D…
▽ More
Cold steady-state disk wind theory from near Keplerian accretion disks requires a large scale magnetic field at near equipartition strength. However the minimum magnetization has never been tested. We investigate the time evolution of an accretion disk threaded by a weak vertical magnetic field. The strength of the field is such that the disk magnetization falls off rapidly with radius. Four 2.5D numerical simulations of viscous resistive accretion disk are performed using the magnetohydrodynamic code PLUTO. In these simulations, a mean field approach is used and turbulence is assumed to give rise to anomalous transport coefficients (alpha prescription). The large scale magnetic field introduces only a small perturbation to the disk structure, with accretion driven by the dominant viscous torque. A super fast magnetosonic jet is observed to be launched from the innermost regions and remains stationary over more than 953 Keplerian orbits. The self-confined jet is launched from a finite radial zone in the disk which remains constant over time. Ejection is made possible because the magnetization reaches unity at the disk surface, due to the steep density decrease. However, no ejection is reported when the midplane magnetization becomes too small. The asymptotic jet velocity remains nevertheless too low to explain observed jets due to the negligible power carried away by the jet. Astrophysical disks with superheated surface layers could drive analogous outflows even if their midplane magnetization is low. Sufficient angular momentum would be extracted by the turbulent viscosity to allow the accretion process to continue. The magnetized outflows would be no more than byproducts, rather than a fundamental driver of accretion. However, if the midplane magnetization increases towards the center, a natural transition to an inner jet dominated disk could be achieved.
△ Less
Submitted 23 March, 2010;
originally announced March 2010.
-
Accretion funnels onto weakly magnetized young stars
Authors:
N. Bessolaz,
C. Zanni,
J. Ferreira,
R. Keppens,
J. Bouvier
Abstract:
Aims : We re-examine the conditions required to steadily deviate an accretion flow from a circumstellar disc into a magnetospheric funnel flow onto a slow rotating young forming star. Methods : New analytical constraints on the formation of accretion funnels flows due to the presence of a dipolar stellar magnetic field disrupting the disc are derived. The Versatile Advection Code is used to conf…
▽ More
Aims : We re-examine the conditions required to steadily deviate an accretion flow from a circumstellar disc into a magnetospheric funnel flow onto a slow rotating young forming star. Methods : New analytical constraints on the formation of accretion funnels flows due to the presence of a dipolar stellar magnetic field disrupting the disc are derived. The Versatile Advection Code is used to confirm these constraints numerically. Axisymmetric MHD simulations are performed, where a stellar dipole field enters the resistive accretion disc, whose structure is self-consistently computed. Results : The analytical criterion derived allows to predict a priori the position of the truncation radius from a non perturbative accretion disc model. Accretion funnels are found to be robust features which occur below the co-rotation radius, where the stellar poloidal magnetic pressure becomes both at equipartition with the disc thermal pressure and is comparable to the disc poloidal ram pressure. We confirm the results of Romanova et al. 2002 and find accretion funnels for stellar dipole fields as low as 140 G in the low accretion rate limit of $10^{-9} M_\odot.yr^{-1}$. With our present numerical setup with no disc magnetic field, we found no evidence of winds, neither disc driven nor X-winds, and the star is only spun up by its interaction with the disc. Conclusions : Weak dipole fields, similar in magnitude to those observed, lead to the development of accretion funnel flows in weakly accreting T Tauri stars. However, the higher accretion observed for most T Tauri stars (${\dot M} \sim 10^{-8} M_\odot.yr^{-1}$) requires either larger stellar field strength and/or different magnetic topologies to allow for magnetospheric accretion.
△ Less
Submitted 18 December, 2007;
originally announced December 2007.
-
MHD simulations of jet acceleration from Keplerian accretion disks: the effects of disk resistivity
Authors:
C. Zanni,
A. Ferrari,
R. Rosner,
G. Bodo,
S. Massaglia
Abstract:
Accretion disks and astrophysical jets are used to model many active astrophysical objects, viz., young stars, relativistic stars, and active galactic nuclei. In this paper we present self-consistent time-dependent simulations of supersonic jets launched from magnetized accretion disks, using high resolution numerical techniques. In particular we study the effects of the disk magnetic resistivit…
▽ More
Accretion disks and astrophysical jets are used to model many active astrophysical objects, viz., young stars, relativistic stars, and active galactic nuclei. In this paper we present self-consistent time-dependent simulations of supersonic jets launched from magnetized accretion disks, using high resolution numerical techniques. In particular we study the effects of the disk magnetic resistivity, parametrized through an alpha-prescription, in determining the properties of the inflow-outflow system. Moreover we analyze under which conditions steady state solutions of the type proposed in the self similar models of Blandford and Payne can be reached and maintained in a self consistent nonlinear stage. We use the resistive MHD FLASH code with adaptive mesh refinement, allowing us to follow the evolution of the structure for a time scale long enough to reach steady state. A detailed analysis of the initial configuration state is given. We obtain the expected solutions in the axisymmetric (2.5D) limit. Assuming a magnetic field around equipartition with the thermal pressure of the disk, we show how the characteristics of the disk jet system, as the ejection efficiency and the energetics, are affected by the anomalous resistivity acting inside the disk.
△ Less
Submitted 5 March, 2007;
originally announced March 2007.
-
PLUTO: a Numerical Code for Computational Astrophysics
Authors:
A. Mignone,
G. Bodo,
S. Massaglia,
T. Matsakos,
O. Tesileanu,
C. Zanni,
A. Ferrari
Abstract:
We present a new numerical code, PLUTO, for the solution of hypersonic flows in 1, 2 and 3 spatial dimensions and different systems of coordinates. The code provides a multi-physics, multi-algorithm modular environment particularly oriented towards the treatment of astrophysical flows in presence of discontinuities. Different hydrodynamic modules and algorithms may be independently selected to p…
▽ More
We present a new numerical code, PLUTO, for the solution of hypersonic flows in 1, 2 and 3 spatial dimensions and different systems of coordinates. The code provides a multi-physics, multi-algorithm modular environment particularly oriented towards the treatment of astrophysical flows in presence of discontinuities. Different hydrodynamic modules and algorithms may be independently selected to properly describe Newtonian, relativistic, MHD or relativistic MHD fluids. The modular structure exploits a general framework for integrating a system of conservation laws, built on modern Godunov-type shock-capturing schemes. Although a plethora of numerical methods has been successfully developed over the past two decades, the vast majority shares a common discretization recipe, involving three general steps: a piecewise polynomial reconstruction followed by the solution of Riemann problems at zone interfaces and a final evolution stage. We have checked and validated the code against several benchmarks available in literature. Test problems in 1, 2 and 3 dimensions are discussed.
△ Less
Submitted 12 March, 2007; v1 submitted 30 January, 2007;
originally announced January 2007.
-
Heating groups and clusters of galaxies: the role of AGN jets
Authors:
C. Zanni,
G. Murante,
G. Bodo,
S. Massaglia,
P. Rossi,
A. Ferrari
Abstract:
X-Ray observations of groups and clusters of galaxies show that the Intra-Cluster Medium (ICM) in their cores is hotter than expected from cosmological numerical simulations of cluster formation which include star formation, radiative cooling and SN feedback. We investigate the effect of the injection of supersonic AGN jets into the ICM using axisymmetric hydrodynamical numerical simulations. A…
▽ More
X-Ray observations of groups and clusters of galaxies show that the Intra-Cluster Medium (ICM) in their cores is hotter than expected from cosmological numerical simulations of cluster formation which include star formation, radiative cooling and SN feedback. We investigate the effect of the injection of supersonic AGN jets into the ICM using axisymmetric hydrodynamical numerical simulations. A simple model for the ICM, describing the radial properties of gas and the gravitational potential in cosmological N-Body+SPH simulations of one cluster and three groups of galaxies at redshift z=0, is obtained and used to set the environment in which the jets are injected. We varied the kinetic power of the jet and the emission-weighted X-Ray temperature of the ICM. The jets transfer their energy to the ICM mainly by the effects of their terminal shocks. A high fraction of the injected energy can be deposited through irreversible processes in the cluster gas, up to 75% in our simulations. We show how one single, powerful jet can reconcile the predicted X-Ray properties of small groups, e.g. the Lx-Tx relation, with observations. We argue that the interaction between AGN jets and galaxy groups and cluster atmospheres is a viable feedback mechanism.
△ Less
Submitted 30 August, 2004;
originally announced August 2004.
-
X-ray emission from expanding cocoons
Authors:
C. Zanni,
G. Bodo,
P. Rossi,
S. Massaglia,
A. Durbala,
A. Ferrari
Abstract:
X-ray observations of extragalactic radiosources show strong evidences of interaction between the radio emitting plasma and the X-ray emitting ambient gas. In this paper we perform a detailed study of this interaction by numerical simulations. We study the propagation of an axisymmetric supersonic jet in an isothermal King atmosphere and we analyze the evolution of the resulting X-ray properties…
▽ More
X-ray observations of extragalactic radiosources show strong evidences of interaction between the radio emitting plasma and the X-ray emitting ambient gas. In this paper we perform a detailed study of this interaction by numerical simulations. We study the propagation of an axisymmetric supersonic jet in an isothermal King atmosphere and we analyze the evolution of the resulting X-ray properties and their dependence on the jet physical parameters. We show the existence of two distinct and observationally different regimes of interaction, with strong and weak shocks. In the first case shells of enhanced X-ray emission are to be expected, while in the second case we expect deficit of X-ray emission coincident with the cocoon. By a comparison between analytical models and the results of our numerical simulations, we discuss the dependence of the transition between these two regimes on the jet parameters and we find that the mean controlling quantity results to be the jet kinetic power. We then discuss how the observed jets can be used to constrain the jet properties.
△ Less
Submitted 14 February, 2003;
originally announced February 2003.
-
On the origin of X-shaped radio-sources: new insights from the properties of their host galaxies
Authors:
A. Capetti,
S. Zamfir,
P. Rossi,
G. Bodo,
C. Zanni,
S. Massaglia
Abstract:
A significant fraction of extended radio sources presents a peculiar X-shaped radio morphology: in addition to the classical double lobed structure, radio emission is also observed along a second axis of symmetry in the form of diffuse wings or tails. We re-examine the origin of these extensions relating the radio morphology to the properties of their host galaxies. The orientation of the wings…
▽ More
A significant fraction of extended radio sources presents a peculiar X-shaped radio morphology: in addition to the classical double lobed structure, radio emission is also observed along a second axis of symmetry in the form of diffuse wings or tails. We re-examine the origin of these extensions relating the radio morphology to the properties of their host galaxies. The orientation of the wings shows a striking connection with the structure of the host galaxy as they are preferentially aligned with its minor axis. Furthermore, wings are only observed in galaxies of high projected ellipticity. Hydrodynamical simulations of the radio-source evolution show that X-shaped radio-sources naturally form in this geometrical situation: as a jet propagates in a non-spherical gas distribution, the cocoon surrounding the radio-jets expands laterally at a high rate producing wings of radio emission, in a way that is reminiscent of the twin-exhaust model for radio-sources.
△ Less
Submitted 16 July, 2002;
originally announced July 2002.