-
Tilt-to-length coupling in LISA Pathfinder: long-term stability
Authors:
M Armano,
H Audley,
J Baird,
P Binetruy,
M Born,
D Bortoluzzi,
E Castelli,
A Cavalleri,
A Cesarini,
A M Cruise,
K Danzmann,
M de Deus Silva,
I Diepholz,
G Dixon,
R Dolesi,
L Ferraioli,
V Ferroni,
E D Fitzsimons,
M Freschi,
L Gesa,
D Giardini,
F Gibert,
R Giusteri,
C Grimani,
J Grzymisch
, et al. (53 additional authors not shown)
Abstract:
The tilt-to-length coupling during the LISA Pathfinder mission has been numerically and analytically modeled for particular timespans. In this work, we investigate the long-term stability of the coupling coefficients of this noise. We show that they drifted slowly (by 1\,$μ$m/rad and 6$\times10^{-6}$ in 100 days) and strongly correlated to temperature changes within the satellite (8\,$μ$m/rad/K an…
▽ More
The tilt-to-length coupling during the LISA Pathfinder mission has been numerically and analytically modeled for particular timespans. In this work, we investigate the long-term stability of the coupling coefficients of this noise. We show that they drifted slowly (by 1\,$μ$m/rad and 6$\times10^{-6}$ in 100 days) and strongly correlated to temperature changes within the satellite (8\,$μ$m/rad/K and 30$\times10^{-6}$/K). Based on analytical TTL coupling models, we attribute the temperature-driven coupling changes to rotations of the test masses and small distortions in the optical setup. Particularly, we show that LISA Pathfinder's optical baseplate was bent during the cooldown experiment, which started in late 2016 and lasted several months.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
Precision measurements of the magnetic parameters of LISA Pathfinder test masses
Authors:
M Armano,
H Audley,
J Baird,
P Binetruy,
M Born,
D Bortoluzzi,
E Castelli,
A Cavalleri,
A Cesarini,
A M Cruise,
K Danzmann,
M De Deus Silva,
I Diepholz,
G Dixon,
R Dolesi,
L Ferraioli,
V Ferroni,
E D Fitzsimons,
M Freschi,
L Gesa,
D Giardini,
F Gibert,
R Giusteri,
C Grimani,
J Grzymisch
, et al. (53 additional authors not shown)
Abstract:
A precise characterization of the magnetic properties of LISA Pathfinder free falling test-masses is of special interest for future gravitational wave observatory in space. Magnetic forces have an important impact on the instrument sensitivity in the low frequency regime below the millihertz. In this paper we report on the magnetic injection experiments performed throughout LISA Pathfinder operati…
▽ More
A precise characterization of the magnetic properties of LISA Pathfinder free falling test-masses is of special interest for future gravitational wave observatory in space. Magnetic forces have an important impact on the instrument sensitivity in the low frequency regime below the millihertz. In this paper we report on the magnetic injection experiments performed throughout LISA Pathfinder operations. We show how these experiments allowed a high precision estimate of the instrument magnetic parameters. The remanent magnetic moment was found to have a modulus of $(0.245\pm0.081)\,\rm{nAm}^2$, the x-component of the background magnetic field within the test masses position was measured to be $(414 \pm 74)$ nT and its gradient had a value of $(-7.4\pm 2.1)\,μ$T/m. Finally, we also measured the test mass magnetic susceptibility to be $(-3.35\pm0.15)\times$10$^{-5}$ in the low frequency regime. All results are in agreement with on-ground estimates.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
-
Magnetic-induced force noise in LISA Pathfinder free-falling test masses
Authors:
M Armano,
H Audley,
J Baird,
P Binetruy,
M Born,
D Bortoluzzi,
E Castelli,
A Cavalleri,
A Cesarini,
A M Cruise,
K Danzmann,
M De Deus Silva,
I Diepholz,
G Dixon,
R Dolesi,
L Ferraioli,
V Ferroni,
E D Fitzsimons,
M Freschi,
L Gesa,
D Giardini,
F Gibert,
R Giusteri,
C Grimani,
J Grzymisch
, et al. (53 additional authors not shown)
Abstract:
LISA Pathfinder was a mission designed to test key technologies required for gravitational wave detection in space. Magnetically driven forces play a key role in the instrument sensitivity in the low-frequency regime, which corresponds to the measurement band of interest for future space-borne gravitational wave observatories. Magnetic-induced forces couple to the test mass motion, introducing a c…
▽ More
LISA Pathfinder was a mission designed to test key technologies required for gravitational wave detection in space. Magnetically driven forces play a key role in the instrument sensitivity in the low-frequency regime, which corresponds to the measurement band of interest for future space-borne gravitational wave observatories. Magnetic-induced forces couple to the test mass motion, introducing a contribution to the relative acceleration noise between the free falling test masses. In this Letter we present the first complete estimate of this term of the instrument performance model. Our results set the magnetic-induced acceleration noise during the February 2017 noise run of $\rm 0.25_{-0.08}^{+0.15}\,fm\,s^{-2}/\sqrt{Hz}$ at 1 mHz and $\rm 1.01_{-0.24}^{+0.73}\, fm\,s^{-2}/\sqrt{Hz}$ at 0.1 mHz. We also discuss how the non-stationarities of the interplanetary magnetic field can affect these values during extreme space weather conditions.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
-
In-depth analysis of LISA Pathfinder performance results: time evolution, noise projection, physical models, and implications for LISA
Authors:
M. Armano,
H. Audley,
J. Baird,
P. Binetruy,
M. Born,
D. Bortoluzzi,
E. Castelli,
A. Cavalleri,
A. Cesarini,
V. Chiavegato,
A. M. Cruise,
D. Dal Bosco,
K. Danzmann,
M. De Deus Silva,
I. Diepholz,
G. Dixon,
R. Dolesi,
L. Ferraioli,
V. Ferroni,
E. D. Fitzsimons,
M. Freschi,
L. Gesa,
D. Giardini,
F. Gibert,
R. Giusteri
, et al. (55 additional authors not shown)
Abstract:
We present an in-depth analysis of the LISA Pathfinder differential acceleration performance over the entire course of its science operations, spanning approximately 500 days. We find that: 1) the evolution of the Brownian noise that dominates the acceleration amplitude spectral density (ASD), for frequencies $f\gtrsim 1\,\text{mHz}$, is consistent with the decaying pressure due to the outgassing…
▽ More
We present an in-depth analysis of the LISA Pathfinder differential acceleration performance over the entire course of its science operations, spanning approximately 500 days. We find that: 1) the evolution of the Brownian noise that dominates the acceleration amplitude spectral density (ASD), for frequencies $f\gtrsim 1\,\text{mHz}$, is consistent with the decaying pressure due to the outgassing of a single gaseous species. 2) between $f=36\,μ\text{Hz}$ and $1\,\text{mHz}$, the acceleration ASD shows a $1/f$ tail in excess of the Brownian noise of almost constant amplitude, with $\simeq 20\%$ fluctuations over a period of a few days, with no particular time pattern over the course of the mission; 3) at the lowest considered frequency of $f=18\,μ\text{Hz}$, the ASD significantly deviates from the $1/f$ behavior, because of temperature fluctuations that appear to modulate a quasi-static pressure gradient, sustained by the asymmetries of the outgassing pattern. We also present the results of a projection of the observed acceleration noise on the potential sources for which we had either a direct correlation measurement, or a quantitative estimate from dedicated experiments. These sources account for approximately $40\%$ of the noise power in the $1/f$ tail. Finally, we analyze the possible sources of the remaining unexplained fraction, and identify the possible measures that may be taken to keep those under control in LISA.
△ Less
Submitted 3 July, 2024; v1 submitted 8 May, 2024;
originally announced May 2024.
-
Estimate of force noise from electrostatic patch potentials in LISA Pathfinder
Authors:
Stefano Vitale,
Lorenzo Sala,
Valerio Ferroni,
William Joseph Weber
Abstract:
This paper discusses force noise in LISA and LISA Pathfinder arising from the interaction of patch potentials on the test mass and surrounding electrode housing surfaces with their own temporal fluctuations. We aim to estimate the contribution of this phenomenon to the force noise detected in LISA Pathfinder in excess of the background from Brownian motion. We introduce a model of that approximate…
▽ More
This paper discusses force noise in LISA and LISA Pathfinder arising from the interaction of patch potentials on the test mass and surrounding electrode housing surfaces with their own temporal fluctuations. We aim to estimate the contribution of this phenomenon to the force noise detected in LISA Pathfinder in excess of the background from Brownian motion. We introduce a model of that approximates the interacting test mass and housing surfaces as concentric spheres, treating patch potentials as isotropic stochastic Gaussian processes on the surface of these spheres. We find that a scenario of patches due to surface contamination, with diffusion driven density fluctuations, could indeed produce force noise with the observed frequency $f^{-2}$ dependence. However there is not enough experimental evidence, neither from LISA Pathfinder itself, nor from other experiments, to predict the amplitude of such a noise, which could range from completely negligible to explaining the entire noise excess. We briefly discuss several measures to ensure that this noise is sufficiently small in LISA .
△ Less
Submitted 12 April, 2024;
originally announced April 2024.
-
LISA Definition Study Report
Authors:
Monica Colpi,
Karsten Danzmann,
Martin Hewitson,
Kelly Holley-Bockelmann,
Philippe Jetzer,
Gijs Nelemans,
Antoine Petiteau,
David Shoemaker,
Carlos Sopuerta,
Robin Stebbins,
Nial Tanvir,
Henry Ward,
William Joseph Weber,
Ira Thorpe,
Anna Daurskikh,
Atul Deep,
Ignacio Fernández Núñez,
César García Marirrodriga,
Martin Gehler,
Jean-Philippe Halain,
Oliver Jennrich,
Uwe Lammers,
Jonan Larrañaga,
Maike Lieser,
Nora Lützgendorf
, et al. (86 additional authors not shown)
Abstract:
The Laser Interferometer Space Antenna (LISA) is the first scientific endeavour to detect and study gravitational waves from space. LISA will survey the sky for Gravitational Waves in the 0.1 mHz to 1 Hz frequency band which will enable the study of a vast number of objects ranging from Galactic binaries and stellar mass black holes in the Milky Way, to distant massive black-hole mergers and the e…
▽ More
The Laser Interferometer Space Antenna (LISA) is the first scientific endeavour to detect and study gravitational waves from space. LISA will survey the sky for Gravitational Waves in the 0.1 mHz to 1 Hz frequency band which will enable the study of a vast number of objects ranging from Galactic binaries and stellar mass black holes in the Milky Way, to distant massive black-hole mergers and the expansion of the Universe. This definition study report, or Red Book, presents a summary of the very large body of work that has been undertaken on the LISA mission over the LISA definition phase.
△ Less
Submitted 12 February, 2024;
originally announced February 2024.
-
NanoNewton electrostatic force actuators for femtoNewton-sensitive measurements: system performance test in the LISA Pathfinder mission
Authors:
M Armano,
H Audley,
J Baird,
M Bassan,
P Binetruy,
M Born,
D Bortoluzzi,
E Castelli,
A Cavalleri,
A Cesarini,
V Chiavegato,
A M Cruise,
D Dal Bosco,
K Danzmann,
M De Deus Silva,
R De Rosa,
L Di Fiore,
I Diepholz,
G Dixon,
R Dolesi,
L Ferraioli V Ferroni,
E D Fitzsimons,
M Freschi,
L Gesa,
D Giardini
, et al. (65 additional authors not shown)
Abstract:
Electrostatic force actuation is a key component of the system of geodesic reference test masses (TM) for the LISA orbiting gravitational wave observatory and in particular for performance at low frequencies, below 1 mHz, where the observatory sensitivity is limited by stray force noise. The system needs to apply forces of order 10$^{-9}$ N while limiting fluctuations in the measurement band to le…
▽ More
Electrostatic force actuation is a key component of the system of geodesic reference test masses (TM) for the LISA orbiting gravitational wave observatory and in particular for performance at low frequencies, below 1 mHz, where the observatory sensitivity is limited by stray force noise. The system needs to apply forces of order 10$^{-9}$ N while limiting fluctuations in the measurement band to levels approaching 10$^{-15}$ N/Hz$^{1/2}$. We present here the LISA actuation system design, based on audio-frequency voltage carrier signals, and results of its in-flight performance test with the LISA Pathfinder test mission. In LISA, TM force actuation is used to align the otherwise free-falling TM to the spacecraft-mounted optical metrology system, without any forcing along the critical gravitational wave-sensitive interferometry axes. In LISA Pathfinder, on the other hand, the actuation was used also to stabilize the TM along the critical $x$ axis joining the two TM, with the commanded actuation force entering directly into the mission's main differential acceleration science observable. The mission allowed demonstration of the full compatibility of the electrostatic actuation system with the LISA observatory requirements, including dedicated measurement campaigns to amplify, isolate, and quantify the two main force noise contributions from the actuation system, from actuator gain noise and from low frequency ``in band'' voltage fluctuations. These campaigns have shown actuation force noise to be a relevant, but not dominant, noise source in LISA Pathfinder and have allowed performance projections for the conditions expected in the LISA mission.
△ Less
Submitted 30 December, 2023;
originally announced January 2024.
-
Tilt-to-length coupling in LISA Pathfinder: a data analysis
Authors:
M Armano,
H Audley,
J Baird,
P Binetruy,
M Born,
D Bortoluzzi,
E Castelli,
A Cavalleri,
A Cesarini,
A M Cruise,
K Danzmann,
M de Deus Silva,
I Diepholz,
G Dixon,
R Dolesi,
L Ferraioli,
V Ferroni,
E D Fitzsimons,
M Freschi,
L Gesa,
D Giardini,
F Gibert,
R Giusteri,
C Grimani,
J Grzymisch
, et al. (54 additional authors not shown)
Abstract:
We present a study of the tilt-to-length coupling noise during the LISA Pathfinder mission and how it depended on the system's alignment. Tilt-to-length coupling noise is the unwanted coupling of angular and lateral spacecraft or test mass motion into the primary interferometric displacement readout. It was one of the major noise sources in the LISA Pathfinder mission and is likewise expected to b…
▽ More
We present a study of the tilt-to-length coupling noise during the LISA Pathfinder mission and how it depended on the system's alignment. Tilt-to-length coupling noise is the unwanted coupling of angular and lateral spacecraft or test mass motion into the primary interferometric displacement readout. It was one of the major noise sources in the LISA Pathfinder mission and is likewise expected to be a primary noise source in LISA. We demonstrate here that a recently derived and published analytical model describes the dependency of the LISA Pathfinder tilt-to-length coupling noise on the alignment of the two freely falling test masses. This was verified with the data taken before and after the realignments performed in March (engineering days) and June 2016, and during a two-day experiment in February 2017 (long cross-talk experiment). The latter was performed with the explicit goal of testing the tilt-to-length coupling noise dependency on the test mass alignment. Using the analytical model, we show that all realignments performed during the mission were only partially successful and explain the reasons why. In addition to the analytical model, we computed another physical tilt-to-length coupling model via a minimising routine making use of the long cross-talk experiment data. A similar approach could prove useful for the LISA mission.
△ Less
Submitted 4 August, 2023;
originally announced August 2023.
-
Glitch systematics on the observation of massive black-hole binaries with LISA
Authors:
Alice Spadaro,
Riccardo Buscicchio,
Daniele Vetrugno,
Antoine Klein,
Davide Gerosa,
Stefano Vitale,
Rita Dolesi,
William Joseph Weber,
Monica Colpi
Abstract:
Detecting and coherently characterizing thousands of gravitational-wave signals is a core data-analysis challenge for the Laser Interferometer Space Antenna (LISA). Transient artifacts, or "glitches", with disparate morphologies are expected to be present in the data, potentially affecting the scientific return of the mission. We present the first joint reconstruction of short-lived astrophysical…
▽ More
Detecting and coherently characterizing thousands of gravitational-wave signals is a core data-analysis challenge for the Laser Interferometer Space Antenna (LISA). Transient artifacts, or "glitches", with disparate morphologies are expected to be present in the data, potentially affecting the scientific return of the mission. We present the first joint reconstruction of short-lived astrophysical signals and noise artifacts. Our analysis is inspired by glitches observed by the LISA Pathfinder mission, including both acceleration and fast displacement transients. We perform full Bayesian inference using LISA time-delay interferometric data and gravitational waveforms describing mergers of massive black holes. We focus on a representative binary with a detector-frame total mass of $6 \times 10^7 M_\odot$ at redshift $5$, yielding a signal lasting $\sim 30~\mathrm{h}$ in the LISA sensitivity band. We explore two glitch models of different flexibility, namely a fixed parametric family and a shapelet decomposition. In the most challenging scenario, we report a complete loss of the gravitational-wave signal if the glitch is ignored; more modest glitches induce biases on the black-hole parameters. On the other hand, a joint inference approach fully sanitizes the reconstruction of both the astrophysical and the glitch signal. We also inject a variety of glitch morphologies in isolation, without a superimposed gravitational signal, and show we can identify the correct transient model. Our analysis is an important step** stone toward a realistic treatment of LISA data in the context of the highly sought-after "global fit".
△ Less
Submitted 21 December, 2023; v1 submitted 6 June, 2023;
originally announced June 2023.
-
Coronal Heating as Determined by the Solar Flare Frequency Distribution Obtained by Aggregating Case Studies
Authors:
James Paul Mason,
Alexandra Werth,
Colin G. West,
Allison A. Youngblood,
Donald L. Woodraska,
Courtney Peck,
Kevin Lacjak,
Florian G. Frick,
Moutamen Gabir,
Reema A. Alsinan,
Thomas Jacobsen,
Mohammad Alrubaie,
Kayla M. Chizmar,
Benjamin P. Lau,
Lizbeth Montoya Dominguez,
David Price,
Dylan R. Butler,
Connor J. Biron,
Nikita Feoktistov,
Kai Dewey,
N. E. Loomis,
Michal Bodzianowski,
Connor Kuybus,
Henry Dietrick,
Aubrey M. Wolfe
, et al. (977 additional authors not shown)
Abstract:
Flare frequency distributions represent a key approach to addressing one of the largest problems in solar and stellar physics: determining the mechanism that counter-intuitively heats coronae to temperatures that are orders of magnitude hotter than the corresponding photospheres. It is widely accepted that the magnetic field is responsible for the heating, but there are two competing mechanisms th…
▽ More
Flare frequency distributions represent a key approach to addressing one of the largest problems in solar and stellar physics: determining the mechanism that counter-intuitively heats coronae to temperatures that are orders of magnitude hotter than the corresponding photospheres. It is widely accepted that the magnetic field is responsible for the heating, but there are two competing mechanisms that could explain it: nanoflares or Alfvén waves. To date, neither can be directly observed. Nanoflares are, by definition, extremely small, but their aggregate energy release could represent a substantial heating mechanism, presuming they are sufficiently abundant. One way to test this presumption is via the flare frequency distribution, which describes how often flares of various energies occur. If the slope of the power law fitting the flare frequency distribution is above a critical threshold, $α=2$ as established in prior literature, then there should be a sufficient abundance of nanoflares to explain coronal heating. We performed $>$600 case studies of solar flares, made possible by an unprecedented number of data analysts via three semesters of an undergraduate physics laboratory course. This allowed us to include two crucial, but nontrivial, analysis methods: pre-flare baseline subtraction and computation of the flare energy, which requires determining flare start and stop times. We aggregated the results of these analyses into a statistical study to determine that $α= 1.63 \pm 0.03$. This is below the critical threshold, suggesting that Alfvén waves are an important driver of coronal heating.
△ Less
Submitted 9 May, 2023;
originally announced May 2023.
-
ASCENT - A balloon-borne hard X-ray imaging spectroscopy telescope using transition edge sensor microcalorimeter detectors
Authors:
Fabian Kislat,
Daniel Becker,
Douglas Bennett,
Adrika Dasgupta,
Joseph Fowler,
Christopher L. Fryer,
Johnathon Gard,
Ephraim Gau,
Danielle Gurgew,
Keon Harmon,
Takayuki Hayashi,
Scott Heatwole,
Md Arman Hossen,
Henric Krawczynski,
R. James Lanzi,
Jason Legere,
John A. B. Mates,
Mark McConnell,
Johanna Nagy,
Takashi Okajima,
Toshiki Sato,
Daniel Schmidt,
Sean Spooner,
Daniel Swetz,
Keisuke Tamura
, et al. (4 additional authors not shown)
Abstract:
Core collapse supernovae are thought to be one of the main sources in the galaxy of elements heavier than iron. Understanding the origin of the elements is thus tightly linked to our understanding of the explosion mechanism of supernovae and supernova nucleosynthesis. X-ray and gamma-ray observations of young supernova remnants, combined with improved theoretical modeling, have resulted in enormou…
▽ More
Core collapse supernovae are thought to be one of the main sources in the galaxy of elements heavier than iron. Understanding the origin of the elements is thus tightly linked to our understanding of the explosion mechanism of supernovae and supernova nucleosynthesis. X-ray and gamma-ray observations of young supernova remnants, combined with improved theoretical modeling, have resulted in enormous improvements in our knowledge of these events. The isotope ${}^{44}$Ti is one of the most sensitive probes of the innermost regions of the core collapse engine, and its spatial and velocity distribution are key observables. Hard X-ray imaging spectroscopy with the Nuclear Spectroscopic Telescope Array (NuSTAR) has provided new insights into the structure of the supernova remnant Cassiopeia A (Cas A), establishing the convective nature of the supernova engine. However, many questions about the details of this engine remain. We present here the concept for a balloon-borne follow-up mission called ASCENT (A SuperConducting ENergetic x-ray Telescope). ASCENT uses transition edge sensor gamma-ray microcalorimeter detectors with a demonstrated 55 eV Full Width Half Maximum (FWHM) energy resolution at 97 keV. This 8--16-fold improvement in energy resolution over NuSTAR will allow high resolution imaging and spectroscopy of the ${}^{44}$Ti emission. This will allow a detailed reconstruction of gamma-ray line redshifts, widths, and shapes, allowing us to address questions such as: What is the source of the neutron star "kicks"? What is the dominant production pathway for ${}^{44}$Ti? Is the engine of Cas A unique?
△ Less
Submitted 4 January, 2023;
originally announced January 2023.
-
D-Egg: a Dual PMT Optical Module for IceCube
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
N. Aggarwal,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
A. A. Alves Jr.,
N. M. Amin,
K. Andeen,
T. Anderson,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
V. Basu,
R. Bay,
J. J. Beatty,
K. -H. Becker,
J. Becker Tjus
, et al. (369 additional authors not shown)
Abstract:
The D-Egg, an acronym for ``Dual optical sensors in an Ellipsoid Glass for Gen2,'' is one of the optical modules designed for future extensions of the IceCube experiment at the South Pole. The D-Egg has an elongated-sphere shape to maximize the photon-sensitive effective area while maintaining a narrow diameter to reduce the cost and the time needed for drilling of the deployment holes in the glac…
▽ More
The D-Egg, an acronym for ``Dual optical sensors in an Ellipsoid Glass for Gen2,'' is one of the optical modules designed for future extensions of the IceCube experiment at the South Pole. The D-Egg has an elongated-sphere shape to maximize the photon-sensitive effective area while maintaining a narrow diameter to reduce the cost and the time needed for drilling of the deployment holes in the glacial ice for the optical modules at depths up to 2700 meters. The D-Egg design is utilized for the IceCube Upgrade, the next stage of the IceCube project also known as IceCube-Gen2 Phase 1, where nearly half of the optical sensors to be deployed are D-Eggs. With two 8-inch high-quantum efficiency photomultiplier tubes (PMTs) per module, D-Eggs offer an increased effective area while retaining the successful design of the IceCube digital optical module (DOM). The convolution of the wavelength-dependent effective area and the Cherenkov emission spectrum provides an effective photodetection sensitivity that is 2.8 times larger than that of IceCube DOMs. The signal of each of the two PMTs is digitized using ultra-low-power 14-bit analog-to-digital converters with a sampling frequency of 240 MSPS, enabling a flexible event triggering, as well as seamless and lossless event recording of single-photon signals to multi-photons exceeding 200 photoelectrons within 10 nanoseconds. Mass production of D-Eggs has been completed, with 277 out of the 310 D-Eggs produced to be used in the IceCube Upgrade. In this paper, we report the des\ ign of the D-Eggs, as well as the sensitivity and the single to multi-photon detection performance of mass-produced D-Eggs measured in a laboratory using the built-in data acquisition system in each D-Egg optical sensor module.
△ Less
Submitted 29 December, 2022;
originally announced December 2022.
-
Charging of free-falling test masses in orbit due to cosmic rays: results from LISA Pathfinder
Authors:
LISA Pathfinder Collaboration,
M. Armano,
H. Audley,
J. Baird,
P. Binetruy,
M. Born,
D. Bortoluzzi,
E. Castelli,
A. Cavalleri A. Cesarini,
A. M Cruise,
K. Danzmann,
M. de Deus Silva,
I. Diepholz,
G. Dixon,
R. Dolesi,
L. Ferraioli,
V. Ferroni,
E. D. Fitzsimons,
M. Freschi,
L. Gesa,
D. Giardini,
F. Gibert,
R. Giusteri,
C. Grimani,
J. Grzymisch
, et al. (50 additional authors not shown)
Abstract:
A comprehensive summary of the measurements made to characterize test mass charging due to the space environment during the LISA Pathfinder mission is presented. Measurements of the residual charge of the test mass after release by the grabbing and positioning mechanism, show that the initial charge of the test masses was negative after all releases, leaving the test mass with a potential in the r…
▽ More
A comprehensive summary of the measurements made to characterize test mass charging due to the space environment during the LISA Pathfinder mission is presented. Measurements of the residual charge of the test mass after release by the grabbing and positioning mechanism, show that the initial charge of the test masses was negative after all releases, leaving the test mass with a potential in the range $-12$ mV to $-512$ mV. Variations in the neutral test mass charging rate between $21.7$ e s$^{-1}$ and $30.7$ e s$^{-1}$ were observed over the course of the 17-month science operations produced by cosmic ray flux changes including a Forbush decrease associated with a small solar energetic particle event. A dependence of the cosmic ray charging rate on the test mass potential between $-30.2$ e s$^{-1}$ V$^{-1}$ and $-40.3$ e s$^{-1}$ V$^{-1}$ was observed and this is attributed to a contribution to charging from low-energy electrons emitted from the gold surfaces of the gravitational reference sensor. Data from the on-board particle detector show a reliable correlation with the charging rate and with other environmental monitors of the cosmic ray flux. This correlation is exploited to extrapolate test mass charging rates to a 20-year period giving useful insight into the expected range of charging rate that may be observed in the LISA mission.
△ Less
Submitted 23 March, 2023; v1 submitted 16 November, 2022;
originally announced November 2022.
-
Community Report from the Biosignatures Standards of Evidence Workshop
Authors:
Victoria Meadows,
Heather Graham,
Victor Abrahamsson,
Zach Adam,
Elena Amador-French,
Giada Arney,
Laurie Barge,
Erica Barlow,
Anamaria Berea,
Maitrayee Bose,
Dina Bower,
Marjorie Chan,
Jim Cleaves,
Andrea Corpolongo,
Miles Currie,
Shawn Domagal-Goldman,
Chuanfei Dong,
Jennifer Eigenbrode,
Allison Enright,
Thomas J. Fauchez,
Martin Fisk,
Matthew Fricke,
Yuka Fujii,
Andrew Gangidine,
Eftal Gezer
, et al. (50 additional authors not shown)
Abstract:
The search for life beyond the Earth is the overarching goal of the NASA Astrobiology Program, and it underpins the science of missions that explore the environments of Solar System planets and exoplanets. However, the detection of extraterrestrial life, in our Solar System and beyond, is sufficiently challenging that it is likely that multiple measurements and approaches, spanning disciplines and…
▽ More
The search for life beyond the Earth is the overarching goal of the NASA Astrobiology Program, and it underpins the science of missions that explore the environments of Solar System planets and exoplanets. However, the detection of extraterrestrial life, in our Solar System and beyond, is sufficiently challenging that it is likely that multiple measurements and approaches, spanning disciplines and missions, will be needed to make a convincing claim. Life detection will therefore not be an instantaneous process, and it is unlikely to be unambiguous-yet it is a high-stakes scientific achievement that will garner an enormous amount of public interest. Current and upcoming research efforts and missions aimed at detecting past and extant life could be supported by a consensus framework to plan for, assess and discuss life detection claims (c.f. Green et al., 2021). Such a framework could help increase the robustness of biosignature detection and interpretation, and improve communication with the scientific community and the public. In response to this need, and the call to the community to develop a confidence scale for standards of evidence for biosignature detection (Green et al., 2021), a community-organized workshop was held on July 19-22, 2021. The meeting was designed in a fully virtual (flipped) format. Preparatory materials including readings, instructional videos and activities were made available prior to the workshop, allowing the workshop schedule to be fully dedicated to active community discussion and prompted writing sessions. To maximize global interaction, the discussion components of the workshop were held during business hours in three different time zones, Asia/Pacific, European and US, with daily information hand-off between group organizers.
△ Less
Submitted 8 December, 2022; v1 submitted 25 October, 2022;
originally announced October 2022.
-
On the effectiveness of null TDI channels as instrument noise monitors in LISA
Authors:
Martina Muratore,
Olaf Hartwig,
Daniele Vetrugno,
Stefano Vitale,
William Joseph Weber
Abstract:
We present a study of the use and limits of the Time-Delay Interferometry null channels for in flight estimation of the Laser Interferometer Space Antenna instrumental noise. The paper considers how the two main limiting noise sources, test-mass acceleration noise and interferometric phase measurement noise, propagate through different Time-Delay Interferometry channels: the Michelson combination…
▽ More
We present a study of the use and limits of the Time-Delay Interferometry null channels for in flight estimation of the Laser Interferometer Space Antenna instrumental noise. The paper considers how the two main limiting noise sources, test-mass acceleration noise and interferometric phase measurement noise, propagate through different Time-Delay Interferometry channels: the Michelson combination X that is the most sensitive to gravitational waves, then the less-sensitive combinations $α$, and finally the null channel $ζ$. We note that the null channel $ζ$, which is known to be equivalent to any null channel, not only has a reduced sensitivity to the gravitational waves, but also feature a larger degree of cancellation of the test mass acceleration noise relative to the interferometry noise. This severely limits its use in quantifying the low frequency instrumental noise in the Michelson X combination, which is expected to be dominated by acceleration noise. However, we show that one can still use in-flight noise estimations from $ζ$ to put an upper bound on the considered noises entering in the X channel, which allows to distinguish them from a strong stochastic gravitational wave background.
△ Less
Submitted 2 March, 2023; v1 submitted 5 July, 2022;
originally announced July 2022.
-
The 511-CAM Mission: A Pointed 511 keV Gamma-Ray Telescope with a Focal Plane Detector Made of Stacked Transition Edge Sensor Microcalorimeter Arrays
Authors:
Farzane Shirazi,
Md. Arman Hossen,
Daniel Becker,
Daniel Schmidt,
Daniel Swetz,
Douglas Bennett,
Dana Braun,
Ephraim Gau,
Fabian Kislat,
Johnathon Gard,
John Mates,
Joel Weber,
Nicole Rodriguez Cavero,
Sohee Chun,
Lindsey Lisalda,
Andrew West,
Bhupal Dev,
Francesc Ferrer,
Richard Bose,
Joel Ullom,
Henric Krawczynski
Abstract:
The 511 keV gamma-ray emission from the galactic center region may fully or partially originate from the annihilation of positrons from dark matter particles with electrons from the interstellar medium. Alternatively, the positrons could be created by astrophysical sources, involving exclusively standard model physics. We describe here a new concept for a 511 keV mission called 511-CAM (511 keV ga…
▽ More
The 511 keV gamma-ray emission from the galactic center region may fully or partially originate from the annihilation of positrons from dark matter particles with electrons from the interstellar medium. Alternatively, the positrons could be created by astrophysical sources, involving exclusively standard model physics. We describe here a new concept for a 511 keV mission called 511-CAM (511 keV gamma-ray CAmera using Micro-calorimeters) that combines focusing gamma-ray optics with a stack of Transition Edge Sensor (TES) microcalorimeter arrays in the focal plane. The 511-CAM detector assembly has a projected 511 keV energy resolution of 390 eV Full Width Half Maximum (FWHM) or better, and improves by a factor of at least 11 on the performance of state-of-the-art Ge-based Compton telescopes. Combining this unprecedented energy resolution with sub-arcmin angular resolutions afforded by Laue lens or channeling optics could make substantial contributions to identifying the origin of the 511 keV emission by discovering and characterizing point sources and measuring line-of-sight velocities of the emitting plasmas.
△ Less
Submitted 12 September, 2023; v1 submitted 29 June, 2022;
originally announced June 2022.
-
Performance of the D-Egg Optical Sensor for the IceCube Upgrade
Authors:
Colton Hill,
Maximillian Meier,
Ryo Nagai,
Ken'ichi Kin,
Nobuhiro Shimizu,
Aya Ishihara,
Shigeru Yoshida,
Tyler Anderson,
Jim Braun,
Aaron Fienberg,
Jeff Weber
Abstract:
New optical sensors called the "D-Egg" have been developed for cost-effective instrumentation for the IceCube Upgrade. With two 8-inch high quantum efficient photomultiplier tubes (PMTs), they offer increased effective photocathode area while retaining as much of the successful IceCube Digital Optical Module design as possible. Mass production of D-Eggs has started in 2020. By the end of 2021, the…
▽ More
New optical sensors called the "D-Egg" have been developed for cost-effective instrumentation for the IceCube Upgrade. With two 8-inch high quantum efficient photomultiplier tubes (PMTs), they offer increased effective photocathode area while retaining as much of the successful IceCube Digital Optical Module design as possible. Mass production of D-Eggs has started in 2020. By the end of 2021, there will be 310 D-Eggs produced with 288 deployed in the IceCube Upgrade. The D-Egg readout system uses advanced technologies in electronics and computing power. Each of the two PMT signals is digitised using ultra-low-power 14-bit ADCs with a sampling frequency of 240 megaSPS, enabling seamless and lossless event recording from single-photon signals to signals exceeding 200 PE within 10 nanosecond, as well as flexible event triggering. In this paper, we report the single photon detection performance as well as the multiple photon recording capability of D-Eggs from the mass production line which have been evaluated with the built-in data acquisition system.
△ Less
Submitted 11 August, 2021;
originally announced August 2021.
-
Critical Laboratory Studies to Advance Planetary Science and Support Missions
Authors:
Edith Fayolle,
Laurie Barge,
Morgan Cable,
Brian Drouin,
Jason Dworkin,
Jennifer Hanley,
Bryana Henderson,
Baptiste Journaux,
Aaron Noell,
Farid Salama,
Ella Sciamma-O'Brien,
Sarah Waller,
Jessica Weber,
Christopher Bennett,
Jurgen Blum,
Murthy Gudipati,
Stefanie Milam,
Mohit Melwani-Daswani,
Michel Nuevo,
Silvia Protopapa,
Rachel Smith
Abstract:
Laboratory studies for planetary science and astrobiology aimat advancing our understanding of the Solar System through the promotion of theoretical and experimental research into the underlying processes that shape it. Laboratory studies (experimental and theoretical) are crucial to interpret observations and mission data, and are key incubators for new mission concepts as well as instrument deve…
▽ More
Laboratory studies for planetary science and astrobiology aimat advancing our understanding of the Solar System through the promotion of theoretical and experimental research into the underlying processes that shape it. Laboratory studies (experimental and theoretical) are crucial to interpret observations and mission data, and are key incubators for new mission concepts as well as instrument development and calibration. They also play a vital role in determining habitability of Solar System bodies, enhancing our understanding of the origin of life, and in the search for signs of life beyond Earth, all critical elements of astrobiology. Here we present an overview of the planetary science areas where laboratory studies are critically needed, in particular in the next decade. These areas include planetary & satellites atmospheres, surfaces, and interiors, primitive bodies such as asteroids, meteorites, comets, and trans-Neptunian objects, and signs of life. Generating targeted experimental and theoretical laboratory data that are relevant for a better understanding of the physical, chemical, and biological processes occurring in these environments is crucial. For each area we present i) a brief overview of the state-of-the-art laboratory work, ii) the challenges to analyze and interpret data sets from missions and ground-based observations and to support mission and concept development, and iii) recommendations for high priority laboratory studies.
△ Less
Submitted 25 September, 2020;
originally announced September 2020.
-
A numerical stability analysis for the Einstein-Vlasov system
Authors:
Sebastian Günther,
Jacob Körner,
Timo Lebeda,
Bastian Pötzl,
Gerhard Rein,
Christopher Straub,
Jörg Weber
Abstract:
We investigate stability issues for steady states of the spherically symmetric Einstein-Vlasov system numerically in Schwarzschild, maximal areal, and Eddington-Finkelstein coordinates. Across all coordinate systems we confirm the conjecture that the first binding energy maximum along a one-parameter family of steady states signals the onset of instability. Beyond this maximum perturbed solutions…
▽ More
We investigate stability issues for steady states of the spherically symmetric Einstein-Vlasov system numerically in Schwarzschild, maximal areal, and Eddington-Finkelstein coordinates. Across all coordinate systems we confirm the conjecture that the first binding energy maximum along a one-parameter family of steady states signals the onset of instability. Beyond this maximum perturbed solutions either collapse to a black hole, form heteroclinic orbits, or eventually fully disperse. Contrary to earlier research, we find that a negative binding energy does not necessarily correspond to fully dispersing solutions. We also comment on the so-called turning point principle from the viewpoint of our numerical results. The physical reliability of the latter is strengthened by obtaining consistent results in the three different coordinate systems and by the systematic use of dynamically accessible perturbations.
△ Less
Submitted 17 September, 2020;
originally announced September 2020.
-
Spacecraft and interplanetary contributions to the magnetic environment on-board LISA Pathfinder
Authors:
M. Armano,
H. Audley,
J. Baird,
P. Binetruy,
M. Born,
D. Bortoluzzi,
E. Castelli,
A. Cavalleri,
A. Cesarini,
A. M. Cruise,
K. Danzmann,
M. de Deus Silva,
I. Diepholz,
G. Dixon,
R. Dolesi,
L. Ferraioli,
V. Ferroni,
E. D. Fitzsimons,
M. Freschi,
L. Gesa,
F. Gibert,
D. Giardini,
R. Giusteri,
C. Grimani,
J. Grzymisch
, et al. (57 additional authors not shown)
Abstract:
LISA Pathfinder (LPF) has been a space-based mission designed to test new technologies that will be required for a gravitational wave observatory in space. Magnetically driven forces play a key role in the instrument sensitivity in the low-frequency regime (mHz and below), the measurement band of interest for a space-based observatory. The magnetic field can couple to the magnetic susceptibility a…
▽ More
LISA Pathfinder (LPF) has been a space-based mission designed to test new technologies that will be required for a gravitational wave observatory in space. Magnetically driven forces play a key role in the instrument sensitivity in the low-frequency regime (mHz and below), the measurement band of interest for a space-based observatory. The magnetic field can couple to the magnetic susceptibility and remanent magnetic moment from the test masses and disturb them from their geodesic movement. LISA Pathfinder carried on-board a dedicated magnetic measurement subsystem with noise levels of 10 $ \rm nT \ Hz^{-1/2}$ from 1 Hz down to 1 mHz. In this paper we report on the magnetic measurements throughout LISA Pathfinder operations. We characterise the magnetic environment within the spacecraft, study the time evolution of the magnetic field and its stability down to 20 $μ$Hz, where we measure values around 200 $ \rm nT \ Hz^{-1/2}$ and identify two different frequency regimes, one related to the interplanetary magnetic field and the other to the magnetic field originating inside the spacecraft. Finally, we characterise the non-stationary component of the fluctuations of the magnetic field below the mHz and relate them to the dynamics of the solar wind.
△ Less
Submitted 7 May, 2020;
originally announced May 2020.
-
LISA Pathfinder Performance Confirmed in an Open-Loop Configuration: Results from the Free-Fall Actuation Mode
Authors:
M. Armano,
H. Audley,
J. Baird,
P. Binetruy,
M. Born,
D. Bortoluzzi,
E. Castelli,
A. Cavalleri,
A. Cesarini,
A. M. Cruise,
K. Danzmann,
M. de Deus Silva,
I. Diepholz,
G. Dixon,
R. Dolesi,
L. Ferraioli,
V. Ferroni,
E. D. Fitzsimons,
M. Freschi,
L. Gesa,
F. Gibert,
D. Giardini,
R. Giusteri,
C. Grimani,
J. Grzymisch
, et al. (53 additional authors not shown)
Abstract:
We report on the results of the LISA Pathfinder (LPF) free-fall mode experiment, in which the control force needed to compensate the quasistatic differential force acting on two test masses is applied intermittently as a series of "impulse" forces lasting a few seconds and separated by roughly 350 s periods of true free fall. This represents an alternative to the normal LPF mode of operation in wh…
▽ More
We report on the results of the LISA Pathfinder (LPF) free-fall mode experiment, in which the control force needed to compensate the quasistatic differential force acting on two test masses is applied intermittently as a series of "impulse" forces lasting a few seconds and separated by roughly 350 s periods of true free fall. This represents an alternative to the normal LPF mode of operation in which this balancing force is applied continuously, with the advantage that the acceleration noise during free fall is measured in the absence of the actuation force, thus eliminating associated noise and force calibration errors. The differential acceleration noise measurement presented here with the free-fall mode agrees with noise measured with the continuous actuation scheme, representing an important and independent confirmation of the LPF result. An additional measurement with larger actuation forces also shows that the technique can be used to eliminate actuation noise when this is a dominant factor.
△ Less
Submitted 30 August, 2019;
originally announced August 2019.
-
Temperature stability in the sub-milliHertz band with LISA Pathfinder
Authors:
M. Armano,
H. Audley,
J. Baird,
P. Binetruy,
M. Born,
D. Bortoluzzi,
E. Castelli,
A. Cavalleri,
A. Cesarini,
A. M. Cruise,
K. Danzmann,
M. de Deus Silva,
I. Diepholz,
G. Dixon,
R. Dolesi,
L. Ferraioli,
V. Ferroni,
E. D. Fitzsimons,
M. Freschi,
L. Gesa,
F. Gibert,
D. Giardini,
R. Giusteri,
C. Grimani,
J. Grzymisch
, et al. (57 additional authors not shown)
Abstract:
LISA Pathfinder (LPF) was a technology pioneering mission designed to test key technologies required for gravitational wave detection in space. In the low frequency regime (milli-Hertz and below), where space-based gravitational wave observatories will operate, temperature fluctuations play a crucial role since they can couple into the interferometric measurement and the test masses' free-fall acc…
▽ More
LISA Pathfinder (LPF) was a technology pioneering mission designed to test key technologies required for gravitational wave detection in space. In the low frequency regime (milli-Hertz and below), where space-based gravitational wave observatories will operate, temperature fluctuations play a crucial role since they can couple into the interferometric measurement and the test masses' free-fall accuracy in many ways. A dedicated temperature measurement subsystem, with noise levels in 10$\,μ$K$\,$Hz$^{-1/2}$ down to $1\,$mHz was part of the diagnostics unit on board LPF. In this paper we report on the temperature measurements throughout mission operations, characterize the thermal environment, estimate transfer functions between different locations and report temperature stability (and its time evolution) at frequencies as low as 10$\,μ$Hz, where typically values around $1\,$K$\,$Hz$^{-1/2}$ were measured.
△ Less
Submitted 22 May, 2019;
originally announced May 2019.
-
Micrometeoroid Events in LISA Pathfinder
Authors:
James Ira Thorpe,
Jacob Slutsky,
John Baker,
Tyson Littenberg,
Sophie Hourihane,
Nicole Pagane,
Petr Pokorny,
Diego Janches,
Michele Armano,
Heather Audley,
G. Auger,
Jonathan Baird,
Massimo Bassan,
Pierre Binetruy,
Michael Born,
D. Bortoluzzi,
N. Brandt,
M. Caleno,
A Cavalleri,
A Cesarini,
A. M. Cruise,
K. Danzmann,
M. de Deus Silva,
R. De Rosa,
L. Di Fiore
, et al. (82 additional authors not shown)
Abstract:
The zodiacal dust complex, a population of dust and small particles that pervades the Solar System, provides important insight into the formation and dynamics of planets, comets, asteroids, and other bodies. Here we present a new set of data obtained using a novel technique: direct measurements of momentum transfer to a spacecraft from individual particle impacts. This technique is made possible b…
▽ More
The zodiacal dust complex, a population of dust and small particles that pervades the Solar System, provides important insight into the formation and dynamics of planets, comets, asteroids, and other bodies. Here we present a new set of data obtained using a novel technique: direct measurements of momentum transfer to a spacecraft from individual particle impacts. This technique is made possible by the extreme precision of the instruments flown on the LISA Pathfinder spacecraft, a technology demonstrator for a future space-based gravitational wave observatory that operated near the first Sun-Earth Lagrange point from early 2016 through Summer of 2017. Using a simple model of the impacts and knowledge of the control system, we show that it is possible to detect impacts and measure properties such as the transferred momentum (related to the particle's mass and velocity), direction of travel, and location of impact on the spacecraft. In this paper, we present the results of a systematic search for impacts during 4348 hours of Pathfinder data. We report a total of 54 candidates with momenta ranging from 0.2$\,μ\textrm{Ns}$ to 230$\,μ\textrm{Ns}$. We furthermore make a comparison of these candidates with models of micrometeoroid populations in the inner solar system including those resulting from Jupiter-family comets, Oort-cloud comets, Hailey-type comets, and Asteroids. We find that our measured population is consistent with a population dominated by Jupiter-family comets with some evidence for a smaller contribution from Hailey-type comets. This is in agreement with consensus models of the zodiacal dust complex in the momentum range sampled by LISA Pathfinder.
△ Less
Submitted 2 October, 2019; v1 submitted 7 May, 2019;
originally announced May 2019.
-
Forbush decreases and $<$ 2-day GCR flux non-recurrent variations studied with LISA Pathfinder
Authors:
C. Grimani,
M. Armano,
H. Audley,
J. Baird,
S. Benella,
P. Binetruy,
M. Born,
D. Bortoluzzi,
E. Castelli,
A. Cavalleri,
A. Cesarini,
A. M. Cruise,
K. Danzmann,
M. de Deus Silva,
I. Diepholz,
G. Dixon,
R. Dolesi,
M. Fabi,
L. Ferraioli,
V. Ferroni,
N. Finetti,
E. D. Fitzsimons,
M. Freschi,
L. Gesa,
F. Gibert
, et al. (60 additional authors not shown)
Abstract:
Non-recurrent short term variations of the galactic cosmic-ray (GCR) flux above 70 MeV n$^{-1}$ were observed between 2016 February 18 and 2017 July 3 aboard the European Space Agency LISA Pathfinder (LPF) mission orbiting around the Lagrange point L1 at 1.5$\times$10$^6$ km from Earth. The energy dependence of three Forbush decreases (FDs) is studied and reported here. A comparison of these obser…
▽ More
Non-recurrent short term variations of the galactic cosmic-ray (GCR) flux above 70 MeV n$^{-1}$ were observed between 2016 February 18 and 2017 July 3 aboard the European Space Agency LISA Pathfinder (LPF) mission orbiting around the Lagrange point L1 at 1.5$\times$10$^6$ km from Earth. The energy dependence of three Forbush decreases (FDs) is studied and reported here. A comparison of these observations with others carried out in space down to the energy of a few tens of MeV n$^{-1}$ shows that the same GCR flux parameterization applies to events of different intensity during the main phase. FD observations in L1 with LPF and geomagnetic storm occurrence is also presented. Finally, the characteristics of GCR flux non-recurrent variations (peaks and depressions) of duration $<$ 2 days and their association with interplanetary structures are investigated. It is found that, most likely, plasma compression regions between subsequent corotating high-speed streams cause peaks, while heliospheric current sheet crossing cause the majority of the depressions.
△ Less
Submitted 9 April, 2019;
originally announced April 2019.
-
Numerical Models for the Diffuse Ionized Gas in Galaxies. II. Three-dimensional radiative transfer in inhomogeneous interstellar structures as a tool for analyzing the diffuse ionized gas
Authors:
J. A. Weber,
A. W. A. Pauldrach,
T. L. Hoffmann
Abstract:
Aims: We systematically explore a plausible subset of the parameter space involving effective temperatures and metallicities of the ionizing stellar sources, the effects of the hardening of their radiation by surrounding leaky HII regions with different escape fractions, as well as different scenarios for the clumpiness of the DIG, and compute the resulting line strength ratios for a number of dia…
▽ More
Aims: We systematically explore a plausible subset of the parameter space involving effective temperatures and metallicities of the ionizing stellar sources, the effects of the hardening of their radiation by surrounding leaky HII regions with different escape fractions, as well as different scenarios for the clumpiness of the DIG, and compute the resulting line strength ratios for a number of diagnostic optical emission lines.
Methods: For the ionizing fluxes we compute a grid of stellar spectral energy distributions (SEDs) from detailed, fully non-LTE model atmospheres that include the effects of stellar winds and line blocking and blanketing. To calculate the ionization and temperature structure in the HII regions and the diffuse ionized gas we use spherically symmetric photoionization models as well as state-of-the-art three-dimensional (3D) non-LTE radiative transfer simulations, considering hydrogen, helium, and the most abundant metals.
Results: We provide quantitative predictions of how the line ratios from HII regions and the DIG vary as a function of metallicity, stellar effective temperature, and escape fraction from the HII region. The range of predicted line ratios reinforces the hypothesis that the DIG is ionized by (filtered) radiation from hot stars; however, comparison of observed and predicted line ratios indicates that the DIG is typically ionized with a softer SED than predicted by the chosen stellar population synthesis model. Even small changes in simulation parameters like the clum** factor can lead to considerable variation in the ionized volume. Both for a more homogeneous gas and a very inhomogeneous gas containing both dense clumps and channels with low gas density, the ionized region in the dilute gas above the galactic plane can cease to be radiation-bounded, allowing the ionizing radiation to leak into the intergalactic medium.
△ Less
Submitted 23 October, 2018;
originally announced October 2018.
-
Experimental results from the ST7 mission on LISA Pathfinder
Authors:
G Anderson,
J Anderson,
M Anderson,
G Aveni,
D Bame,
P Barela,
K Blackman,
A Carmain,
L Chen,
M Cherng,
S Clark,
M Connally,
W Connolly,
D Conroy,
M Cooper,
C Cutler,
J D'Agostino,
N Demmons,
E Dorantes,
C Dunn,
M Duran,
E Ehrbar,
J Evans,
J Fernandez,
G Franklin
, et al. (123 additional authors not shown)
Abstract:
The Space Technology 7 Disturbance Reduction System (ST7-DRS) is a NASA technology demonstration payload that operated from January 2016 through July of 2017 on the European Space Agency's LISA Pathfinder spacecraft. The joint goal of the NASA and ESA missions was to validate key technologies for a future space-based gravitational wave observatory targeting the source-rich milliHertz band. The two…
▽ More
The Space Technology 7 Disturbance Reduction System (ST7-DRS) is a NASA technology demonstration payload that operated from January 2016 through July of 2017 on the European Space Agency's LISA Pathfinder spacecraft. The joint goal of the NASA and ESA missions was to validate key technologies for a future space-based gravitational wave observatory targeting the source-rich milliHertz band. The two primary components of ST7-DRS are a micropropulsion system based on colloidal micro-Newton thrusters (CMNTs) and a control system that simultaneously controls the attitude and position of the spacecraft and the two free-flying test masses (TMs). This paper presents our main experimental results and summarizes the overall the performance of the CMNTs and control laws. We find that the CMNT performance to be consistent with pre-flight predictions, with a measured system thrust noise on the order of $100\,\textrm{nN}/\sqrt{\textrm{Hz}}$ in the $1\,\textrm{mHz}\leq f \leq 30\,\textrm{mHz}$ band. The control system maintained the TM-spacecraft separation with an RMS error of less than 2$\,$nm and a noise spectral density of less than $3\,\textrm{nm}/\sqrt{\textrm{Hz}}$ in the same band. Thruster calibration measurements yield thrust values consistent with the performance model and ground-based thrust-stand measurements, to within a few percent. We also report a differential acceleration noise between the two test masses with a spectral density of roughly $3\,\textrm{fm}/\textrm{s}^2/\sqrt{\textrm{Hz}}$ in the $1\,\textrm{mHz}\leq f \leq 30\,\textrm{mHz}$ band, slightly less than twice as large as the best performance reported with the baseline LISA Pathfinder configuration and below the current requirements for the Laser Interferometer Space Antenna (LISA) mission.
△ Less
Submitted 16 October, 2018; v1 submitted 24 September, 2018;
originally announced September 2018.
-
Calibrating the system dynamics of LISA Pathfinder
Authors:
M. Armano,
H. Audley,
J. Baird,
P. Binetruy,
M. Born,
D. Bortoluzzi,
E. Castelli,
A. Cavalleri,
A. Cesarini,
A. M. Cruise,
K. Danzmann,
M. de Deus Silva,
I. Diepholz,
G. Dixon,
R. Dolesi,
L. Ferraioli,
V. Ferroni,
E. D. Fitzsimons,
M. Freschi,
L. Gesa,
F. Gibert,
D. Giardini,
R. Giusteri,
C. Grimani,
J. Grzymisch
, et al. (53 additional authors not shown)
Abstract:
LISA Pathfinder (LPF) was a European Space Agency mission with the aim to test key technologies for future space-borne gravitational-wave observatories like LISA. The main scientific goal of LPF was to demonstrate measurements of differential acceleration between free-falling test masses at the sub-femto-g level, and to understand the residual acceleration in terms of a physical model of stray for…
▽ More
LISA Pathfinder (LPF) was a European Space Agency mission with the aim to test key technologies for future space-borne gravitational-wave observatories like LISA. The main scientific goal of LPF was to demonstrate measurements of differential acceleration between free-falling test masses at the sub-femto-g level, and to understand the residual acceleration in terms of a physical model of stray forces, and displacement readout noise. A key step toward reaching the LPF goals was the correct calibration of the dynamics of LPF, which was a three-body system composed by two test-masses enclosed in a single spacecraft, and subject to control laws for system stability. In this work, we report on the calibration procedures adopted to calculate the residual differential stray force per unit mass acting on the two test-masses in their nominal positions. The physical parameters of the adopted dynamical model are presented, together with their role on LPF performance. The analysis and results of these experiments show that the dynamics of the system was accurately modeled and the dynamical parameters were stationary throughout the mission. Finally, the impact and importance of calibrating system dynamics for future space-based gravitational wave observatories is discussed.
△ Less
Submitted 22 June, 2018;
originally announced June 2018.
-
Characteristics and energy dependence of recurrent galactic cosmic-ray flux depressions and of a Forbush decrease with LISA Pathfinder
Authors:
M. Armano,
H. Audley,
J. Baird,
M. Bassan,
S. Benella,
P. Binetruy,
M. Born,
D. Bortoluzzi,
A. Cavalleri,
A. Cesarini,
A. M. Cruise,
K. Danzmann,
M. de Deus Silva,
I. Diepholz,
G. Dixon,
R. Dolesi,
M. Fabi,
L. Ferraioli,
V. Ferroni,
N. Finetti,
E. D. Fitzsimons,
M. Freschi,
L. Gesa,
F. Gibert,
D. Giardini
, et al. (60 additional authors not shown)
Abstract:
Galactic cosmic-ray (GCR) energy spectra observed in the inner heliosphere are modulated by the solar activity, the solar polarity and structures of solar and interplanetary origin. A high counting rate particle detector (PD) aboard LISA Pathfinder (LPF), meant for subsystems diagnostics, was devoted to the measurement of galactic cosmic-ray and solar energetic particle integral fluxes above 70 Me…
▽ More
Galactic cosmic-ray (GCR) energy spectra observed in the inner heliosphere are modulated by the solar activity, the solar polarity and structures of solar and interplanetary origin. A high counting rate particle detector (PD) aboard LISA Pathfinder (LPF), meant for subsystems diagnostics, was devoted to the measurement of galactic cosmic-ray and solar energetic particle integral fluxes above 70 MeV n$^{-1}$ up to 6500 counts s$^{-1}$. PD data were gathered with a sampling time of 15 s. Characteristics and energy-dependence of GCR flux recurrent depressions and of a Forbush decrease dated August 2, 2016 are reported here. The capability of interplanetary missions, carrying PDs for instrument performance purposes, in monitoring the passage of interplanetary coronal mass ejections (ICMEs) is also discussed.
△ Less
Submitted 27 April, 2018; v1 submitted 23 February, 2018;
originally announced February 2018.
-
Measuring the Galactic Cosmic Ray Flux with the LISA Pathfinder Radiation Monitor
Authors:
M Armano,
H Audley,
J Baird,
P Binetruy,
M Born,
D Bortoluzzi,
E Castelli,
A Cavalleri,
A Cesarini,
M Cruise,
K Danzmann,
M de Deus Silva,
I Diepholz,
G Dixon,
R Dolesi,
L Ferraioli,
V Ferroni,
N Finetti,
E D Fitzsimons,
M Freschi,
L Gesa,
F Gibert,
D Giardini,
R Giusteri,
C Grimani
, et al. (54 additional authors not shown)
Abstract:
Test mass charging caused by cosmic rays will be a significant source of acceleration noise for space-based gravitational wave detectors like LISA. Operating between December 2015 and July 2017, the technology demonstration mission LISA Pathfinder included a bespoke monitor to help characterise the relationship between test mass charging and the local radiation environment. The radiation monitor m…
▽ More
Test mass charging caused by cosmic rays will be a significant source of acceleration noise for space-based gravitational wave detectors like LISA. Operating between December 2015 and July 2017, the technology demonstration mission LISA Pathfinder included a bespoke monitor to help characterise the relationship between test mass charging and the local radiation environment. The radiation monitor made in situ measurements of the cosmic ray flux while also providing information about its energy spectrum. We describe the monitor and present measurements which show a gradual 40% increase in count rate coinciding with the declining phase of the solar cycle. Modulations of up to 10% were also observed with periods of 13 and 26 days that are associated with co-rotating interaction regions and heliospheric current sheet crossings. These variations in the flux above the monitor detection threshold (approximately 70 MeV) are shown to be coherent with measurements made by the IREM monitor on-board the Earth orbiting INTEGRAL spacecraft. Finally we use the measured deposited energy spectra, in combination with a GEANT4 model, to estimate the galactic cosmic ray differential energy spectrum over the course of the mission.
△ Less
Submitted 12 January, 2018; v1 submitted 20 November, 2017;
originally announced November 2017.
-
First Light for GRAVITY: Phase Referencing Optical Interferometry for the Very Large Telescope Interferometer
Authors:
GRAVITY Collaboration,
R. Abuter,
M. Accardo,
A. Amorim,
N. Anugu,
G. Ávila,
N. Azouaoui,
M. Benisty,
J. P. Berger,
N. Blind,
H. Bonnet,
P. Bourget,
W. Brandner,
R. Brast,
A. Buron,
L. Burtscher,
F. Cassaing,
F. Chapron,
É. Choquet,
Y. Clénet,
C. Collin,
V. Coudé du Foresto,
W. de Wit,
P. T. de Zeeuw,
C. Deen
, et al. (108 additional authors not shown)
Abstract:
GRAVITY is a new instrument to coherently combine the light of the European Southern Observatory Very Large Telescope Interferometer to form a telescope with an equivalent 130 m diameter angular resolution and a collecting area of 200 m$^2$. The instrument comprises fiber fed integrated optics beam combination, high resolution spectroscopy, built-in beam analysis and control, near-infrared wavefro…
▽ More
GRAVITY is a new instrument to coherently combine the light of the European Southern Observatory Very Large Telescope Interferometer to form a telescope with an equivalent 130 m diameter angular resolution and a collecting area of 200 m$^2$. The instrument comprises fiber fed integrated optics beam combination, high resolution spectroscopy, built-in beam analysis and control, near-infrared wavefront sensing, phase-tracking, dual beam operation and laser metrology [...]. This article gives an overview of GRAVITY and reports on the performance and the first astronomical observations during commissioning in 2015/16. We demonstrate phase tracking on stars as faint as m$_K$ ~ 10 mag, phase-referenced interferometry of objects fainter than m$_K$ ~ 15 mag with a limiting magnitude of m$_K$ ~ 17 mag, minute long coherent integrations, a visibility accuracy of better than 0.25 %, and spectro-differential phase and closure phase accuracy better than 0.5°, corresponding to a differential astrometric precision of better than 10 microarcseconds (μas). The dual-beam astrometry, measuring the phase difference of two objects with laser metrology, is still under commissioning. First observations show residuals as low as 50 μas when following objects over several months. We illustrate the instrument performance with the observations of archetypical objects for the different instrument modes. Examples include the Galactic Center supermassive black hole and its fast orbiting star S2 for phase referenced dual beam observations and infrared wavefront sensing, the High Mass X-Ray Binary BP Cru and the Active Galactic Nucleus of PDS 456 for few μas spectro-differential astrometry, the T Tauri star S CrA for a spectro-differential visibility analysis, ξ Tel and 24 Cap for high accuracy visibility observations, and η Car for interferometric imaging with GRAVITY.
△ Less
Submitted 5 May, 2017;
originally announced May 2017.
-
Charge-induced force-noise on free-falling test masses: results from LISA Pathfinder
Authors:
M. Armano,
H. Audley,
G. Auger,
J. T. Baird,
P. Binetruy,
M. Born,
D. Bortoluzzi,
N. Brandt,
A. Bursi,
M. Caleno,
A. Cavalleri,
A. Cesarini,
M. Cruise,
K. Danzmann,
M. de Deus Silva,
I. Diepholz,
R. Dolesi,
N. Dunbar,
L. Ferraioli,
V. Ferroni,
E. D. Fitzsimons,
R. Flatscher,
M. Freschi,
J. Gallegos,
C. García Marirrodriga
, et al. (69 additional authors not shown)
Abstract:
We report on electrostatic measurements made on board the European Space Agency mission LISA Pathfinder. Detailed measurements of the charge-induced electrostatic forces exerted on free-falling test masses (TMs) inside the capacitive gravitational reference sensor are the first made in a relevant environment for a space-based gravitational wave detector. Employing a combination of charge control a…
▽ More
We report on electrostatic measurements made on board the European Space Agency mission LISA Pathfinder. Detailed measurements of the charge-induced electrostatic forces exerted on free-falling test masses (TMs) inside the capacitive gravitational reference sensor are the first made in a relevant environment for a space-based gravitational wave detector. Employing a combination of charge control and electric-field compensation, we show that the level of charge-induced acceleration noise on a single TM can be maintained at a level close to 1.0 fm/s^2/sqrt(Hz) across the 0.1-100 mHz frequency band that is crucial to an observatory such as LISA. Using dedicated measurements that detect these effects in the differential acceleration between the two test masses, we resolve the stochastic nature of the TM charge build up due to interplanetary cosmic rays and the TM charge-to-force coupling through stray electric fields in the sensor. All our measurements are in good agreement with predictions based on a relatively simple electrostatic model of the LISA Pathfinder instrument.
△ Less
Submitted 15 February, 2017;
originally announced February 2017.
-
The metrology system of the VLTI instrument GRAVITY
Authors:
Magdalena Lippa,
Stefan Gillessen,
Nicolas Blind,
Yipting Kok,
Senol Yazici,
Johannes Weber,
Oliver Pfuhl,
Marcus Haug,
Stefan Kellner,
Ekkehard Wieprecht,
Frank Eisenhauer,
Reinhard Genzel,
Oliver Hans,
Frank Haussmann,
David Huber,
Tobias Kratschmann,
Thomas Ott,
Markus Plattner,
Christian Rau,
Eckhard Sturm,
Idel Waisberg,
Erich Wiezorrek,
Guy Perrin,
Karine Perraut,
Wolfgang Brandner
, et al. (2 additional authors not shown)
Abstract:
The VLTI instrument GRAVITY combines the beams from four telescopes and provides phase-referenced imaging as well as precision-astrometry of order 10 microarcseconds by observing two celestial objects in dual-field mode. Their angular separation can be determined from their differential OPD (dOPD) when the internal dOPDs in the interferometer are known. Here, we present the general overview of the…
▽ More
The VLTI instrument GRAVITY combines the beams from four telescopes and provides phase-referenced imaging as well as precision-astrometry of order 10 microarcseconds by observing two celestial objects in dual-field mode. Their angular separation can be determined from their differential OPD (dOPD) when the internal dOPDs in the interferometer are known. Here, we present the general overview of the novel metrology system which performs these measurements. The metrology consists of a three-beam laser system and a homodyne detection scheme for three-beam interference using phase-shifting interferometry in combination with lock-in amplifiers. Via this approach the metrology system measures dOPDs on a nanometer-level.
△ Less
Submitted 17 August, 2016;
originally announced August 2016.
-
Spitzer observations of extragalactic H II regions - III. NGC 6822 and the hot star, H II region connection
Authors:
Robert H. Rubin,
Janet P. Simpson,
Sean W. J. Colgan,
Reginald J. Dufour,
Justin Kader,
Ian A. McNabb,
Adalbert W. A. Pauldrach,
Johann A. Weber
Abstract:
Using the short-high module of the Infrared Spectrograph on the Spitzer Space Telescope, we have measured the [S IV] 10.51, [Ne II] 12.81, [Ne III] 15.56, and [S III] 18.71-micron emission lines in nine H II regions in the dwarf irregular galaxy NGC 6822. These lines arise from the dominant ionization states of the elements neon (Ne$^{++}$, Ne$^+$) and sulphur (S$^{3+}$, S$^{++}$), thereby allowin…
▽ More
Using the short-high module of the Infrared Spectrograph on the Spitzer Space Telescope, we have measured the [S IV] 10.51, [Ne II] 12.81, [Ne III] 15.56, and [S III] 18.71-micron emission lines in nine H II regions in the dwarf irregular galaxy NGC 6822. These lines arise from the dominant ionization states of the elements neon (Ne$^{++}$, Ne$^+$) and sulphur (S$^{3+}$, S$^{++}$), thereby allowing an analysis of the neon to sulphur abundance ratio as well as the ionic abundance ratios Ne$^+$/Ne$^{++}$ and S$^{3+}$/S$^{++}$. By extending our studies of H II regions in M83 and M33 to the lower metallicity NGC 6822, we increase the reliability of the estimated Ne/S ratio. We find that the Ne/S ratio appears to be fairly universal, with not much variation about the ratio found for NGC 6822: the median (average) Ne/S ratio equals 11.6 (12.2$\pm$0.8). This value is in contrast to Asplund et al.'s currently best estimated value for the Sun: Ne/S = 6.5. In addition, we continue to test the predicted ionizing spectral energy distributions (SEDs) from various stellar atmosphere models by comparing model nebulae computed with these SEDs as inputs to our observational data, changing just the stellar atmosphere model abundances. Here we employ a new grid of SEDs computed with different metallicities: Solar, 0.4 Solar, and 0.1 Solar. As expected, these changes to the SED show similar trends to those seen upon changing just the nebular gas metallicities in our plasma simulations: lower metallicity results in higher ionization. This trend agrees with the observations.
△ Less
Submitted 25 April, 2016; v1 submitted 29 March, 2016;
originally announced March 2016.
-
Optimal design of calibration signals in space borne gravitational wave detectors
Authors:
M. Nofrarias,
N. Karnesis,
F. Gibert,
M. Armano,
H. Audley. K. Danzmann,
I. Diepholz,
R. Dolesi,
L. Ferraioli,
V. Ferroni,
M. Hewitson,
M. Hueller,
H. Inchauspe,
O. Jennrich,
N. Korsakova. P. W. McNamara,
E. Plagnol,
J. I. Thorpe,
D. Vetrugno,
S. Vitale,
P. Wass,
W. J. Weber
Abstract:
Future space borne gravitational wave detectors will require a precise definition of calibration signals to ensure the achievement of their design sensitivity. The careful design of the test signals plays a key role in the correct understanding and characterisation of these instruments. In that sense, methods achieving optimal experiment designs must be considered as complementary to the parameter…
▽ More
Future space borne gravitational wave detectors will require a precise definition of calibration signals to ensure the achievement of their design sensitivity. The careful design of the test signals plays a key role in the correct understanding and characterisation of these instruments. In that sense, methods achieving optimal experiment designs must be considered as complementary to the parameter estimation methods being used to determine the parameters describing the system. The relevance of experiment design is particularly significant for the LISA Pathfinder mission, which will spend most of its operation time performing experiments to characterise key technologies for future space borne gravitational wave observatories. Here we propose a framework to derive the optimal signals ---in terms of minimum parameter uncertainty--- to be injected to these instruments during its calibration phase. We compare our results with an alternative numerical algorithm which achieves an optimal input signal by iteratively improving an initial guess. We show agreement of both approaches when applied to the LISA Pathfinder case.
△ Less
Submitted 30 November, 2015;
originally announced November 2015.
-
GRAVITY: the VLTI 4-beam combiner for narrow-angle astrometry and interferometric imaging
Authors:
N. Blind,
F. Eisenhauer,
S. Gillessen,
Y. Kok,
M. Lippa,
G. Perrin,
R. Dembet,
P. Fedou,
S. Lacour,
K. Perraut,
L. Jocou,
L. Burtscher,
O. Hans,
M. Haug,
F. Haussmann,
S. Huber,
A. Janssen,
S. Kellner,
T. Ott,
O. Pfuhl,
E. Sturm,
J. Weber,
E. Wieprecht,
A. Amorim,
W. Brandner
, et al. (1 additional authors not shown)
Abstract:
GRAVITY is the second generation Very Large Telescope Interferometer instrument for precision narrow-angle astrometry and interferometric imaging in the Near Infra-Red (NIR). It shall provide precision astrometry of order 10 microarcseconds, and imaging capability at a few milliarcsecond resolution, and hence will revolutionise dynamical measurements of celestial objects. GRAVITY is currently in t…
▽ More
GRAVITY is the second generation Very Large Telescope Interferometer instrument for precision narrow-angle astrometry and interferometric imaging in the Near Infra-Red (NIR). It shall provide precision astrometry of order 10 microarcseconds, and imaging capability at a few milliarcsecond resolution, and hence will revolutionise dynamical measurements of celestial objects. GRAVITY is currently in the last stages of its integration and tests in Garching at MPE, and will be delivered to the VLT Interferometer (VLTI) in 2015. We present here the instrument, with a particular focus on the components making use of fibres: integrated optics beam combiners, polarisation rotators, fibre differential delay lines, and the metrology.
△ Less
Submitted 25 March, 2015;
originally announced March 2015.
-
The GRAVITY instrument software / High-level software
Authors:
Leonard Burtscher,
Ekkehard Wieprecht,
Thomas Ott,
Yit** Kok,
Senol Yazici,
Narsireddy Anugu,
Roderick Dembet,
Pierre Fedou,
Sylvestre Lacour,
Juergen Ott,
Thibaut Paumard,
Vincent Lapeyrere,
Pierre Kervella,
Roberto Abuter,
Eszter Pozna,
Frank Eisenhauer,
Nicolas Blind,
Reinhard Genzel,
Stefan Gillessen,
Oliver Hans,
Marcus Haug,
Frank Haussmann,
Stefan Kellner,
Magdalena Lippa,
Oliver Pfuhl
, et al. (8 additional authors not shown)
Abstract:
GRAVITY is the four-beam, near- infrared, AO-assisted, fringe tracking, astrometric and imaging instrument for the Very Large Telescope Interferometer (VLTI). It is requiring the development of one of the most complex instrument software systems ever built for an ESO instrument. Apart from its many interfaces and interdependencies, one of the most challenging aspects is the overall performance and…
▽ More
GRAVITY is the four-beam, near- infrared, AO-assisted, fringe tracking, astrometric and imaging instrument for the Very Large Telescope Interferometer (VLTI). It is requiring the development of one of the most complex instrument software systems ever built for an ESO instrument. Apart from its many interfaces and interdependencies, one of the most challenging aspects is the overall performance and stability of this complex system. The three infrared detectors and the fast reflective memory network (RMN) recorder contribute a total data rate of up to 20 MiB/s accumulating to a maximum of 250 GiB of data per night. The detectors, the two instrument Local Control Units (LCUs) as well as the five LCUs running applications under TAC (Tools for Advanced Control) architecture, are interconnected with fast Ethernet, RMN fibers and dedicated fiber connections as well as signals for the time synchronization. Here we give a simplified overview of all subsystems of GRAVITY and their interfaces and discuss two examples of high-level applications during observations: the acquisition procedure and the gathering and merging of data to the final FITS file.
△ Less
Submitted 23 January, 2015;
originally announced January 2015.
-
Three-dimensional modeling of ionized gas. II. Spectral energy distributions of massive and very massive stars in stationary and time-dependent modeling of the ionization of metals in HII regions
Authors:
J. A. Weber,
A. W. A. Pauldrach,
T. L. Hoffmann
Abstract:
HII regions play a crucial role in the measurement of the chemical composition of the interstellar medium and provide fundamental data about element abundances that constrain models of galactic chemical evolution. Discrepancies that still exist between observed emission line strengths and those predicted by nebular models can be partly attributed to the spectral energy distributions (SEDs) of the…
▽ More
HII regions play a crucial role in the measurement of the chemical composition of the interstellar medium and provide fundamental data about element abundances that constrain models of galactic chemical evolution. Discrepancies that still exist between observed emission line strengths and those predicted by nebular models can be partly attributed to the spectral energy distributions (SEDs) of the sources of ionizing radiation used in the models as well as simplifying assumptions made in nebular modeling. The influence of stellar metallicity on nebular line strength ratios, via its effect on the SEDs, is of similar importance as variations in the nebular metallicity. We have computed a grid of model atmosphere SEDs for massive and very massive O-type stars covering a range of metallicities from significantly subsolar (0.1 Zsun) to supersolar (2 Zsun). The SEDs have been computed using a state-of-the-art model atmosphere code that takes into account the attenuation of the ionizing flux by the spectral lines of all important elements and the hydrodynamics of the radiatively driven winds and their influence on the SEDs. For the assessment of the SEDs in nebular simulations we have developed a (heretofore not available) 3d radiative transfer code that includes a time-dependent treatment of the metal ionization. Using the SEDs in both 1d and 3d nebular models we explore the relative influence of stellar metallicity, gas metallicity, and inhomogeneity of the gas on the nebular ionization structure and emission line strengths. We find that stellar and gas metallicity are of similar importance for establishing the line strength ratios commonly used in nebular diagnostics, whereas inhomogeneity of the gas has only a subordinate influence on the global line emission.
△ Less
Submitted 21 January, 2015;
originally announced January 2015.
-
The GRAVITY metrology system: narrow-angle astrometry via phase-shifting interferometry
Authors:
M. Lippa,
N. Blind,
S. Gillessen,
Y. Kok,
J. Weber,
F. Eisenhauer,
O. Pfuhl,
A. Janssen,
M. Haug,
F. Haußmann,
S. Kellner,
O. Hans,
E. Wieprecht,
T. Ott,
L. Burtscher,
R. Genzel,
E. Sturm,
R. Hofmann,
S. Huber,
D. Huber,
S. Senftleben,
A. Pflüger,
R. Greßmann,
G. Perrin,
K. Perraut
, et al. (4 additional authors not shown)
Abstract:
The VLTI instrument GRAVITY will provide very powerful astrometry by combining the light from four telescopes for two objects simultaneously. It will measure the angular separation between the two astronomical objects to a precision of 10 microarcseconds. This corresponds to a differential optical path difference (dOPD) between the targets of few nanometers and the paths within the interferometer…
▽ More
The VLTI instrument GRAVITY will provide very powerful astrometry by combining the light from four telescopes for two objects simultaneously. It will measure the angular separation between the two astronomical objects to a precision of 10 microarcseconds. This corresponds to a differential optical path difference (dOPD) between the targets of few nanometers and the paths within the interferometer have to be maintained stable to that level. For this purpose, the novel metrology system of GRAVITY will monitor the internal dOPDs by means of phase-shifting interferometry. We present the four-step phase-shifting concept of the metrology with emphasis on the method used for calibrating the phase shifts. The latter is based on a phase-step insensitive algorithm which unambiguously extracts phases in contrast to other methods that are strongly limited by non-linearities of the phase-shifting device. The main constraint of this algorithm is to introduce a robust ellipse fitting routine. Via this approach we are able to measure phase shifts in the laboratory with a typical accuracy of lambda/2000 or 1 nanometer of the metrology wavelength.
△ Less
Submitted 20 January, 2015;
originally announced January 2015.
-
The fiber coupler and beam stabilization system of the GRAVITY interferometer
Authors:
O. Pfuhl,
M. Haug,
F. Eisenhauer,
S. Kellner,
F. Haussmann,
G. Perrin,
S. Gillessen,
C. Straubmeier,
T. Ott,
K. Rousselet-Perraut,
A. Amorim,
M. Lippa,
A. Janssen,
W. Brandner,
Y. Kok,
N. Blind,
L. Burtscher,
E. Sturm,
E. Wieprecht,
M. Schoeller,
J. Weber,
O. Hans,
S. Huber
Abstract:
We present the installed and fully operational beam stabilization and fiber injection subsystem feeding the 2nd generation VLTI instrument GRAVITY. The interferometer GRAVITY requires an unprecedented stability of the VLTI optical train to achieve micro-arcsecond astrometry. For this purpose, GRAVITY contains four fiber coupler units, one per telescope. Each unit is equipped with actuators to stab…
▽ More
We present the installed and fully operational beam stabilization and fiber injection subsystem feeding the 2nd generation VLTI instrument GRAVITY. The interferometer GRAVITY requires an unprecedented stability of the VLTI optical train to achieve micro-arcsecond astrometry. For this purpose, GRAVITY contains four fiber coupler units, one per telescope. Each unit is equipped with actuators to stabilize the telescope beam in terms of tilt and lateral pupil displacement, to rotate the field, to adjust the polarization and to compensate atmospheric piston. A special roof-prism offers the possibility of on-axis as well as off-axis fringe tracking without changing the optical train. We describe the assembly, integration and alignment and the resulting optical quality and performance of the individual units. Finally, we present the closed-loop performance of the tip-tilt and pupil tracking achieved with the final systems in the lab.
△ Less
Submitted 4 December, 2014;
originally announced December 2014.
-
The GRAVITY metrology system: modeling a metrology in optical fibers
Authors:
N. Blind,
H. Huber,
F. Eisenhauer,
J. Weber,
S. Gillessen,
M. Lippa,
L. Burtscher,
O. Hans,
M. Haug,
F. Haussmann,
S. Huber,
A. Janssen,
S. Kellner,
Y. Kok,
T. Ott,
O. Pfuhl,
E. Sturm,
E. Wieprecht,
A. Amorim,
W. Brandner,
G. Perrin,
K. Perraut,
C. Straubmeier
Abstract:
GRAVITY is the second generation VLT Interferometer (VLTI) instrument for high-precision narrow-angle astrometry and phase-referenced interferometric imaging. The laser metrology system of GRAVITY is at the heart of its astrometric mode, which must measure the distance of 2 stars with a precision of 10 micro-arcseconds. This means the metrology has to measure the optical path difference between th…
▽ More
GRAVITY is the second generation VLT Interferometer (VLTI) instrument for high-precision narrow-angle astrometry and phase-referenced interferometric imaging. The laser metrology system of GRAVITY is at the heart of its astrometric mode, which must measure the distance of 2 stars with a precision of 10 micro-arcseconds. This means the metrology has to measure the optical path difference between the two beam combiners of GRAVITY to a level of 5 nm. The metrology design presents some non-common paths that have consequently to be stable at a level of 1 nm. Otherwise they would impact the performance of GRAVITY. The various tests we made in the past on the prototype give us hints on the components responsible for this error, and on their respective contribution to the total error. It is however difficult to assess their exact origin from only OPD measurements, and therefore, to propose a solution to this problem. In this paper, we present the results of a semi-empirical modeling of the fibered metrology system, relying on theoretical basis, as well as on characterisations of key components. The modeling of the metrology system regarding various effects, e.g., temperature, waveguide heating or mechanical stress, will help us to understand how the metrology behave. The goals of this modeling are to 1) model the test set-ups and reproduce the measurements (as a validation of the modeling), 2) determine the origin of the non-common path errors, and 3) propose modifications to the current metrology design to reach the required 1nm stability.
△ Less
Submitted 24 July, 2014;
originally announced July 2014.
-
GRAVITY: the Calibration Unit
Authors:
N. Blind,
F. Eisenhauer,
M. Haug,
S. Gillessen,
M. Lippa,
L. Burtscher,
O. Hans,
F. Haussmann,
S. Huber,
A. Janssen,
S. Kellner,
Y. Kok,
T. Ott,
O. Pfuhl,
E. Sturm,
J. Weber,
E. Wieprecht,
A. Amorim,
W. Brandner,
G. Perrin,
K. Perraut,
C. Straubmeier
Abstract:
We present in this paper the design and characterisation of a new sub-system of the VLTI 2nd generation instrument GRAVITY: the Calibration Unit. The Calibration Unit provides all functions to test and calibrate the beam combiner instrument: it creates two artificial stars on four beams, and dispose of four delay lines with an internal metrology. It also includes artificial stars for the tip-tilt…
▽ More
We present in this paper the design and characterisation of a new sub-system of the VLTI 2nd generation instrument GRAVITY: the Calibration Unit. The Calibration Unit provides all functions to test and calibrate the beam combiner instrument: it creates two artificial stars on four beams, and dispose of four delay lines with an internal metrology. It also includes artificial stars for the tip-tilt and pupil guiding systems, as well as four metrology pick-up diodes, for tests and calibration of the corresponding sub-systems. The calibration unit also hosts the reference targets to align GRAVITY to the VLTI, and the safety shutters to avoid the metrology light to propagate in the VLTI-lab. We present the results of the characterisation and validtion of these differrent sub-units.
△ Less
Submitted 24 July, 2014;
originally announced July 2014.
-
Data series subtraction with unknown and unmodeled background noise
Authors:
Stefano Vitale,
Giuseppe Congedo,
Rita Dolesi,
Valerio Ferroni,
Mauro Hueller,
Daniele Vetrugno,
William Joseph Weber,
Heather Audley,
Karsten Danzmann,
Ingo Diepholz,
Martin Hewitson,
Natalia Korsakova,
Luigi Ferraioli,
Ferran Gibert,
Nikolaos Karnesis,
Miquel Nofrarias,
Henri Inchauspe,
Eric Plagnol,
Oliver Jennrich,
Paul W. McNamara,
Michele Armano,
James Ira Thorpe,
Peter Wass
Abstract:
LISA Pathfinder (LPF), ESA's precursor mission to a gravitational wave observatory, will measure the degree to which two test-masses can be put into free-fall, aiming to demonstrate a residual relative acceleration with a power spectral density (PSD) below 30 fm/s$^2$/Hz$^{1/2}$ around 1 mHz. In LPF data analysis, the measured relative acceleration data series must be fit to other various measured…
▽ More
LISA Pathfinder (LPF), ESA's precursor mission to a gravitational wave observatory, will measure the degree to which two test-masses can be put into free-fall, aiming to demonstrate a residual relative acceleration with a power spectral density (PSD) below 30 fm/s$^2$/Hz$^{1/2}$ around 1 mHz. In LPF data analysis, the measured relative acceleration data series must be fit to other various measured time series data. This fitting is required in different experiments, from system identification of the test mass and satellite dynamics to the subtraction of noise contributions from measured known disturbances. In all cases, the background noise, described by the PSD of the fit residuals, is expected to be coloured, requiring that we perform such fits in the frequency domain. This PSD is unknown {\it a priori}, and a high accuracy estimate of this residual acceleration noise is an essential output of our analysis. In this paper we present a fitting method based on Bayesian parameter estimation with an unknown frequency-dependent background noise. The method uses noise marginalisation in connection with averaged Welch's periodograms to achieve unbiased parameter estimation, together with a consistent, non-parametric estimate of the residual PSD. Additionally, we find that the method is equivalent to some implementations of iteratively re-weighted least-squares fitting. We have tested the method both on simulated data of known PSD, and to analyze differential acceleration from several experiments with the LISA Pathfinder end-to-end mission simulator.
△ Less
Submitted 4 August, 2014; v1 submitted 18 April, 2014;
originally announced April 2014.
-
State space modelling and data analysis exercises in LISA Pathfinder
Authors:
M Nofrarias,
F Antonucci,
M Armano,
H Audley,
G Auger,
M Benedetti,
P Binetruy,
J Bogenstahl,
D Bortoluzzi,
N Brandt,
M Caleno,
A Cavalleri,
G Congedo,
M Cruise,
K Danzmann,
F De Marchi,
M Diaz-Aguilo,
I Diepholz,
G Dixon,
R Dolesi,
N Dunbar,
J Fauste,
L Ferraioli,
V Ferroni W Fichter,
E Fitzsimons
, et al. (61 additional authors not shown)
Abstract:
LISA Pathfinder is a mission planned by the European Space Agency to test the key technologies that will allow the detection of gravitational waves in space. The instrument on-board, the LISA Technology package, will undergo an exhaustive campaign of calibrations and noise characterisation campaigns in order to fully describe the noise model. Data analysis plays an important role in the mission an…
▽ More
LISA Pathfinder is a mission planned by the European Space Agency to test the key technologies that will allow the detection of gravitational waves in space. The instrument on-board, the LISA Technology package, will undergo an exhaustive campaign of calibrations and noise characterisation campaigns in order to fully describe the noise model. Data analysis plays an important role in the mission and for that reason the data analysis team has been develo** a toolbox which contains all the functionalities required during operations. In this contribution we give an overview of recent activities, focusing on the improvements in the modelling of the instrument and in the data analysis campaigns performed both with real and simulated data.
△ Less
Submitted 21 June, 2013; v1 submitted 19 June, 2013;
originally announced June 2013.
-
The Gravitational Universe
Authors:
The eLISA Consortium,
:,
P. Amaro Seoane,
S. Aoudia,
H. Audley,
G. Auger,
S. Babak,
J. Baker,
E. Barausse,
S. Barke,
M. Bassan,
V. Beckmann,
M. Benacquista,
P. L. Bender,
E. Berti,
P. Binétruy,
J. Bogenstahl,
C. Bonvin,
D. Bortoluzzi,
N. C. Brause,
J. Brossard,
S. Buchman,
I. Bykov,
J. Camp,
C. Caprini
, et al. (136 additional authors not shown)
Abstract:
The last century has seen enormous progress in our understanding of the Universe. We know the life cycles of stars, the structure of galaxies, the remnants of the big bang, and have a general understanding of how the Universe evolved. We have come remarkably far using electromagnetic radiation as our tool for observing the Universe. However, gravity is the engine behind many of the processes in th…
▽ More
The last century has seen enormous progress in our understanding of the Universe. We know the life cycles of stars, the structure of galaxies, the remnants of the big bang, and have a general understanding of how the Universe evolved. We have come remarkably far using electromagnetic radiation as our tool for observing the Universe. However, gravity is the engine behind many of the processes in the Universe, and much of its action is dark. Opening a gravitational window on the Universe will let us go further than any alternative. Gravity has its own messenger: Gravitational waves, ripples in the fabric of spacetime. They travel essentially undisturbed and let us peer deep into the formation of the first seed black holes, exploring redshifts as large as z ~ 20, prior to the epoch of cosmic re-ionisation. Exquisite and unprecedented measurements of black hole masses and spins will make it possible to trace the history of black holes across all stages of galaxy evolution, and at the same time constrain any deviation from the Kerr metric of General Relativity. eLISA will be the first ever mission to study the entire Universe with gravitational waves. eLISA is an all-sky monitor and will offer a wide view of a dynamic cosmos using gravitational waves as new and unique messengers to unveil The Gravitational Universe. It provides the closest ever view of the early processes at TeV energies, has guaranteed sources in the form of verification binaries in the Milky Way, and can probe the entire Universe, from its smallest scales around singularities and black holes, all the way to cosmological dimensions.
△ Less
Submitted 24 May, 2013;
originally announced May 2013.
-
Three-Dimensional Modelling of Ionized Gas. I. Did very massive stars of different metallicities drive the second cosmic reionization?
Authors:
J. A. Weber,
A. W. A. Pauldrach,
J. S. Knogl,
T. L. Hoffmann
Abstract:
The first generation of stars that formed directly from the primordial gas played a crucial role in the early phase of the reionization of the universe. Because of the short lifetimes of these stars the metals produced in their cores were quickly returned to the environment, from which early PopII stars with a different initial mass function and different SEDs were formed, already much earlier tha…
▽ More
The first generation of stars that formed directly from the primordial gas played a crucial role in the early phase of the reionization of the universe. Because of the short lifetimes of these stars the metals produced in their cores were quickly returned to the environment, from which early PopII stars with a different initial mass function and different SEDs were formed, already much earlier than the time at which the universe became completely reionized at a redshift of z~6. Using a state-of-the-art model atmosphere code we calculate realistic SEDs of very massive stars (VMSs) of different metallicities to serve as input for the 3-dimensional multi-frequency radiative transfer code we have developed to simulate the temporal evolution of the ionization of the inhomogeneous interstellar and intergalactic medium, using multiple stellar clusters as sources of ionizing radiation. Our tool handles distributions of numerous radiative sources characterized by high resolution synthetic SEDs, and yields occupation numbers of the required energy levels of the most important elements which are treated in NLTE consistently with the 3d radiative transfer. We further demonstrate that the increasing metallicity of the radiative sources in the transition from PopIII stars to PopII stars has a strong impact on the hardness of the emitted spectrum, and hence on the reionization history of helium. A top-heavy stellar mass distribution characterized by VMSs forming in chemically evolved clusters of high core mass density may not only provide the progenitors of intermediate-mass and supermassive black holes (SMBHs), but also play an important role for the reionization of HeII. The number of VMSs required to reionize HeII by a redshift of z~2.5 is astonishingly close to the number of VMSs required to explain galactic SMBHs if one assumes that these have been formed by mergers of smaller black holes.
△ Less
Submitted 17 April, 2013;
originally announced April 2013.
-
Brownian force noise from molecular collisions and the sensitivity of advanced gravitational wave observatories
Authors:
R. Dolesi,
M. Hueller,
D. Nicolodi,
D. Tombolato,
S. Vitale,
P. J. Wass,
W. J. Weber,
M. Evans,
P. Fritschel,
R. Weiss,
J. H. Gundlach,
C. A. Hagedorn,
S. Schlamminger,
G. Ciani,
A. Cavalleri
Abstract:
We present an analysis of Brownian force noise from residual gas dam** of reference test masses as a fundamental sensitivity limit in small force experiments. The resulting acceleration noise increases significantly when the distance of the test mass to the surrounding experimental apparatus is smaller than the dimension of the test mass itself. For the Advanced LIGO interferometric gravitationa…
▽ More
We present an analysis of Brownian force noise from residual gas dam** of reference test masses as a fundamental sensitivity limit in small force experiments. The resulting acceleration noise increases significantly when the distance of the test mass to the surrounding experimental apparatus is smaller than the dimension of the test mass itself. For the Advanced LIGO interferometric gravitational wave observatory, where the relevant test mass is a suspended 340 mm diameter cylindrical end mirror, the force noise power is increased by roughly a factor 40 by the presence of a similarly shaped reaction mass at a nominal separation of 5 mm. The force noise, of order 20 fN\rthz\ for $2 \times 10^{-6}$ Pa of residual H$_2$ gas, rivals quantum optical fluctuations as the dominant noise source between 10 and 30 Hz. We present here a numerical and analytical analysis for the gas dam** force noise for Advanced LIGO, backed up by experimental evidence from several recent measurements. Finally, we discuss the impact of residual gas dam** on the gravitational wave sensitivity and possible mitigation strategies.
△ Less
Submitted 30 September, 2011; v1 submitted 16 August, 2011;
originally announced August 2011.
-
From laboratory experiments to LISA Pathfinder: achieving LISA geodesic motion
Authors:
F Antonucci,
M Armano,
H Audley,
G Auger,
M Benedetti,
P Binetruy,
C Boatella,
J Bogenstahl,
D Bortoluzzi,
P Bosetti,
N Brandt,
M Caleno,
A Cavalleri,
M Cesa,
M Chmeissani,
G Ciani,
A Conchillo,
G Congedo,
I Cristofolini,
M Cruise,
K Danzmann,
F De Marchi,
M Diaz-Aguilo,
I Diepholz,
G Dixon
, et al. (76 additional authors not shown)
Abstract:
This paper presents a quantitative assessment of the performance of the upcoming LISA Pathfinder geodesic explorer mission. The findings are based on the results of extensive ground testing and simulation campaigns using flight hardware and flight control and operations algorithms. The results show that, for the central experiment of measuring the stray differential acceleration between the LISA t…
▽ More
This paper presents a quantitative assessment of the performance of the upcoming LISA Pathfinder geodesic explorer mission. The findings are based on the results of extensive ground testing and simulation campaigns using flight hardware and flight control and operations algorithms. The results show that, for the central experiment of measuring the stray differential acceleration between the LISA test masses, LISA Pathfinder will be able to verify the overall acceleration noise to within a factor two of the LISA requirement at 1 mHz and within a factor 6 at 0.1 mHz. We also discuss the key elements of the physical model of disturbances, coming from LISA Pathfinder and ground measurement, that will guarantee the LISA performance.
△ Less
Submitted 20 January, 2011; v1 submitted 29 December, 2010;
originally announced December 2010.