Showing 1–50 of 71 results for author: Vršnak, B

The catalog of Hvar Observatory solar observations

Authors: Mateja Dumbovic, Luci Karbonini, Jasa Calogovic, Filip Matkovic, Karmen Martinic, Akshay Kumar Remeshan, Roman Brajsa, Bojan Vrsnak

Abstract: We compile the catalog of Hvar Observatory solar observations in the time period corresponding to regular digitally stored chromospheric and photospheric observations 2010-2019. We make basic characterisation of observed phenomena and compare them to catalogs which are based on full disc solar images. We compile a catalog of observed ARs consisting of 1100 entries, where each AR is classified acco… ▽ More We compile the catalog of Hvar Observatory solar observations in the time period corresponding to regular digitally stored chromospheric and photospheric observations 2010-2019. We make basic characterisation of observed phenomena and compare them to catalogs which are based on full disc solar images. We compile a catalog of observed ARs consisting of 1100 entries, where each AR is classified according to McIntosh and Mt Wilson classifications. We find that HVAR observations are biased towards more frequently observing more complex ARs and observing them in longer time periods, likely related to the small FOV not encompassing the whole solar disc. In H$α$ observations we catalog conspicuous filaments/prominences and flares. We characterise filaments according to their location, chirality (if possible) and eruptive signatures. Analysis of the eruptive filaments reveals a slight bias in HVAR catalog towards observation of partial eruptions, possibly related to the observers tendency to observe filament which already showed some activity. In the flare catalog we focus on their observed eruptive signatures (loops or ribbons) and their shape. In addition, we associate them to GOES soft X-ray flares to determine their corresponding class. We find that HVAR observations seem biased towards more frequently observing stronger flares and observing them in longer time periods. We demonstrate the feasibility of the catalog on a case study of the flare detected on 2 August 2011 in HVAR H$α$ observations and related Sun-to-Earth phenomena. Through flare-CME-ICME association we demonstrate the agreement of remote and in situ properties. The data used for this study, as well as the catalog, are made publicly available. △ Less

Submitted 29 April, 2024; originally announced April 2024.

Comments: Solar Physics, 24 pages, 14 figures

A new method of measuring Forbush decreases

Authors: M. Dumbovic, L. Kramaric, I. Benko, B. Heber, B. Vrsnak

Abstract: Forbush decreases (FDs) are short-term depressions in the galactic cosmic ray flux and one of the common signatures of coronal mass ejections (CMEs) in the heliosphere. They often show a two-step profile, the second one associated with the CMEs magnetic structure (flux rope, FR), which can be described by the recently developed model ForbMod. The aim of this study is to utilise ForbMod to develop… ▽ More Forbush decreases (FDs) are short-term depressions in the galactic cosmic ray flux and one of the common signatures of coronal mass ejections (CMEs) in the heliosphere. They often show a two-step profile, the second one associated with the CMEs magnetic structure (flux rope, FR), which can be described by the recently developed model ForbMod. The aim of this study is to utilise ForbMod to develop a best-fit procedure to be applied on FR-related FDs as a convenient measurement tool. We develop a best-fit procedure that can be applied to a data series from an arbitrary detector. Thus, the basic procedure facilitates measurement estimation of the magnitude of the FR-related FD, with the possibility of being adapted for the energy response of a specific detector for a more advanced analysis. The non-linear fitting was performed by calculating all possible ForbMod curves constrained within the FR borders to the designated dataset and minimising the mean square error (MSE). In order to evaluate the performance of the ForbMod best-fit procedure, we used synthetic measurements produced by calculating the theoretical ForbMod curve for a specific example CME and then applying various effects to the data to mimic the imperfection of the real measurements. We also tested the ForbMod best-fit function on the real data, measured by detector F of the SOHO-EPHIN instrument on a sample containing 30 events, all of which have a distinct FD corresponding to the CMEs magnetic structure. Overall, we find that the ForbMod best-fit procedure performs similar to the traditional algorithm-based observational method, but with slightly smaller values for the FD amplitude, as it is taking into account the noise in the data. Furthermore, we find that the best-fit procedure has an advantage compared to the traditional method as it can estimate the FD amplitude even when there is a data gap at the onset of the FD. △ Less

Submitted 17 January, 2024; originally announced January 2024.

Comments: 14 pages, 10 figures, A&A

Effects of coronal mass ejection orientation on its propagation in the heliosphere

Authors: K. Martinic, M. Dumbovic, J. Calogovic, B. Vrsnak, N. Al-Haddad, M. Temmer

Abstract: Context. In the scope of space weather forecasting, it is crucial to be able to more reliably predict the arrival time, speed, and magnetic field configuration of coronal mass ejections (CMEs). From the time a CME is launched, the dominant factor influencing all of the above is the interaction of the interplanetary CME (ICME) with the ambient plasma and interplanetary magnetic field. Aims. Due to… ▽ More Context. In the scope of space weather forecasting, it is crucial to be able to more reliably predict the arrival time, speed, and magnetic field configuration of coronal mass ejections (CMEs). From the time a CME is launched, the dominant factor influencing all of the above is the interaction of the interplanetary CME (ICME) with the ambient plasma and interplanetary magnetic field. Aims. Due to a generally anisotropic heliosphere, differently oriented ICMEs may interact differently with the ambient plasma and interplanetary magnetic field, even when the initial eruption conditions are similar. For this, we examined the possible link between the orientation of an ICME and its propagation in the heliosphere (up to 1 AU). Methods. We investigated 31 CME-ICME associations in the period from 1997 to 2018. The CME orientation in the near-Sun environment was determined using an ellipse-fitting technique applied to single-spacecraft data from SOHO/LASCO C2 and C3 coronagraphs. In the near-Earth environment, we obtained the orientation of the corresponding ICME using in situ plasma and magnetic field data. The shock orientation and nonradial flows in the sheath region for differently oriented ICMEs were investigated. In addition, we calculated the ICME transit time to Earth and drag parameter to probe the overall drag force for differently oriented ICMEs. The drag parameter was calculated using the reverse modeling procedure with the drag-based model. Results. We found a significant difference in nonradial flows for differently oriented ICMEs, whereas a significant difference in drag for differently oriented ICMEs was not found. △ Less

Submitted 27 September, 2023; originally announced September 2023.

Comments: 11 pages, 4 figures

Determination of CME orientation and consequences for their propagation

Authors: Karmen Martinic, Mateja Dumbovic, Manula Temmer, Astrid Veronig, Bojan Vršnak

Abstract: The configuration of the interplanetary magnetic field and features of the related ambient solar wind in the ecliptic and meridional plane are different. Therefore, one can expect that the orientation of the flux-rope axis of a coronal mass ejection (CME) influences the propagation of the CME itself. However, the determination of the CME orientation, especially from image data, remains a challengi… ▽ More The configuration of the interplanetary magnetic field and features of the related ambient solar wind in the ecliptic and meridional plane are different. Therefore, one can expect that the orientation of the flux-rope axis of a coronal mass ejection (CME) influences the propagation of the CME itself. However, the determination of the CME orientation, especially from image data, remains a challenging task to perform. This study aims to provide a reference to different CME orientation determination methods in the near-Sun environment. Also, it aims to investigate the non-radial flow in the sheath region of the interplanetary CME (ICME) in order to provide the first proxy to relate the ICME orientation with its propagation. We investigated 22 isolated CME-ICME events in the period 2008-2015. We determined the CME orientation in the near-Sun environment using the following: 1) a 3D reconstruction of the CME with the graduated cylindrical shell (GCS) model applied to coronagraphic images provided by the STEREO and SOHO missions and; 2) an ellipse fitting applied to single spacecraft data from SOHO/LASCO C2 and C3 coronagraphs. In the near-Earth environment, we obtained the orientation of the corresponding ICME using in situ plasma and field data and also investigated the non-radial flow (NRF) in its sheath region. The ability of GCS and ellipse fitting to determine the CME orientation is found to be limited to reliably distinguish only between the high or low inclination of the events. Most of the CME-ICME pairs under investigation were found to be characterized by a low inclination. For the majority of CME-ICME pairs, we obtain consistent estimations of the tilt from remote and in situ data. The observed NRFs in the sheath region show a greater y direction to z direction flow ratio for high-inclination events, indicating that the CME orientation could have an impact on the CME propagation. △ Less

Submitted 21 April, 2022; originally announced April 2022.

Journal ref: A&A 679, A97 (2023)

How the area of solar coronal holes affects the properties of high-speed solar wind streams near Earth -- An analytical model

Authors: Stefan Johann Hofmeister, Eleanna Asvestari, **gnan Guo, Verena Heidrich-Meisner, Stephan G. Heinemann, Jasmina Magdalenic, Stefaan Poedts, Evangelia Samara, Manuela Temmer, Susanne Vennerstrom, Astrid Veronig, Bojan Vršnak, Robert Wimmer-Schweingruber

Abstract: We derive a simple analytical model for the propagation of HSSs from the Sun to Earth and thereby show how the area of coronal holes and the size of their boundary regions affect the HSS velocity, temperature, and density near Earth. We presume that velocity, temperature, and density profiles form across the HSS cross section close to the Sun and that these spatial profiles translate into correspo… ▽ More We derive a simple analytical model for the propagation of HSSs from the Sun to Earth and thereby show how the area of coronal holes and the size of their boundary regions affect the HSS velocity, temperature, and density near Earth. We presume that velocity, temperature, and density profiles form across the HSS cross section close to the Sun and that these spatial profiles translate into corresponding temporal profiles in a given radial direction due to the solar rotation. These temporal distributions drive the stream interface to the preceding slow solar wind plasma and disperse with distance from the Sun. The HSS properties at 1 AU are then given by all HSS plasma parcels launched from the Sun that did not run into the stream interface at Earth distance. We show that the velocity plateau region of HSSs as seen at 1 AU, if apparent, originates from the center region of the HSS close to the Sun, whereas the velocity tail at 1 AU originates from the trailing boundary region. The peak velocity of HSSs at Earth further depends on the longitudinal width of the HSS close to the Sun. The temperature and density of HSS plasma parcels at Earth depend on their radial expansion from the Sun to Earth. The radial expansion is determined by the velocity gradient across the HSS boundary region close to the Sun and gives the velocity-temperature and density-temperature relationships at Earth their specific shape. When considering a large number of HSSs, the presumed correlation between the HSS velocities and temperatures close to the Sun degrades only slightly up to 1 AU, but the correlation between the velocities and densities is strongly disrupted up to 1 AU due to the radial expansion. Finally, we show how the number of particles of the piled-up slow solar wind in the stream interaction region depends on the velocities and densities of the HSS and preceding slow solar wind plasma. △ Less

Submitted 29 March, 2022; originally announced March 2022.

Journal ref: A&A, 659, A190 (2022)

Generic profile of a long-lived corotating interaction region and associated recurrent Forbush decrease

Authors: Mateja Dumbovic, Bojan Vrsnak, Manuela Temmer, Bernd Heber, Patrick Kuhl

Abstract: We observe and analyse a long-lived corotating interaction region (CIR), originating from a single coronal hole (CH), recurring in 27 consecutive Carrington rotations 2057-2083 in the time period from June 2007 - May 2009. We studied the in situ measurements of this long-lived CIR as well as the corresponding depression in the cosmic ray (CR) count observed by SOHO/EPHIN throughout different rotat… ▽ More We observe and analyse a long-lived corotating interaction region (CIR), originating from a single coronal hole (CH), recurring in 27 consecutive Carrington rotations 2057-2083 in the time period from June 2007 - May 2009. We studied the in situ measurements of this long-lived CIR as well as the corresponding depression in the cosmic ray (CR) count observed by SOHO/EPHIN throughout different rotations. We performed a statistical analysis, as well as the superposed epoch analysis, using relative values of the key parameters: the total magnetic field strength, B, the magnetic field fluctuations, dBrms, plasma flow speed, v, plasma density, n, plasma temperature, T , and the SOHO/EPHIN F-detector particle count, and CR count. We find that the mirrored CR count-time profile is correlated with that of the flow speed, ranging from moderate to strong correlation, depending on the rotation. In addition, we find that the CR count dip amplitude is correlated to the peak in the magnetic field and flow speed of the CIR. These results are in agreement with previous statistical studies. Finally, using the superposed epoch analysis, we obtain a generic CIR example, which reflects the in situ properties of a typical CIR well. Our results are better explained based on the combined convection-diffusion approach of the CIR-related GCR modulation. Furthermore, qualitatively, our results do not differ from those based on different CHs samples. This indicates that the change of the physical properties of the recurring CIR from one rotation to another is not qualitatively different from the change of the physical properties of CIRs originating from different CHs. Finally, the obtained generic CIR example, analyzed on the basis of superposed epoch analysis, can be used as a reference for testing future models. △ Less

Submitted 24 January, 2022; originally announced January 2022.

Comments: 13 pages, A&A in press

Journal ref: A&A 658, A187 (2022)

Analytic modeling of recurrent Forbush decreases caused by corotating interaction regions

Authors: Bojan Vrsnak, Mateja Dumbovic, Bernd Heber, Anamarija Kirin

Abstract: On scales of days, the galactic cosmic ray (GCR) flux is affected by coronal mass ejections and corotating interaction regions (CIRs), causing so-called Forbush decreases and recurrent Forbush decreases (RFDs), respectively. We explain the properties and behavior of RFDs recorded at about 1 au that are caused by CIRs generated by solar wind high-speed streams (HSSs) that emanate from coronal holes… ▽ More On scales of days, the galactic cosmic ray (GCR) flux is affected by coronal mass ejections and corotating interaction regions (CIRs), causing so-called Forbush decreases and recurrent Forbush decreases (RFDs), respectively. We explain the properties and behavior of RFDs recorded at about 1 au that are caused by CIRs generated by solar wind high-speed streams (HSSs) that emanate from coronal holes. We employed a convection-diffusion GCR propagation model based on the Fokker-Planck equation and applied it to solar wind and interplanetary magnetic field properties at 1 au. Our analysis shows that the only two effects that are relevant for a plausible overall explanation of the observations are the enhanced convection effect caused by the increased velocity of the HSS and the reduced diffusion effect caused by the enhanced magnetic field and its fluctuations within the CIR and HSS structure. These two effects that we considered in the model are sufficient to explain not only the main signatures of RFDs, but also the sometimes observed "over-recovery" and secondary dips in RFD profiles. The explanation in terms of the convection-diffusion GCR propagation hypothesis is tested by applying our model to the observations of a long-lived CIR that recurred over 27 rotations in 2007-2008. Our analysis demonstrates a very good match of the model results and observations. △ Less

Submitted 24 January, 2022; originally announced January 2022.

Comments: 15 pages, 9 figures

Probabilistic Drag-Based Ensemble Model (DBEM) Evaluation for Heliospheric Propagation of CMEs

Authors: Jaša Čalogović, Mateja Dumbović, Davor Sudar, Bojan Vršnak, Karmen Martinić, Manuela Temmer, Astrid Veronig

Abstract: The Drag-based Model (DBM) is a 2D analytical model for heliospheric propagation of Coronal Mass Ejections (CMEs) in ecliptic plane predicting the CME arrival time and speed at Earth or any other given target in the solar system. It is based on the equation of motion and depends on initial CME parameters, background solar wind speed, $w$ and the drag parameter $γ$. A very short computational time… ▽ More The Drag-based Model (DBM) is a 2D analytical model for heliospheric propagation of Coronal Mass Ejections (CMEs) in ecliptic plane predicting the CME arrival time and speed at Earth or any other given target in the solar system. It is based on the equation of motion and depends on initial CME parameters, background solar wind speed, $w$ and the drag parameter $γ$. A very short computational time of DBM ($<$ 0.01s) allowed us to develop the Drag-Based Ensemble Model (DBEM) that takes into account the variability of model input parameters by making an ensemble of n different input parameters to calculate the distribution and significance of the DBM results. Thus the DBEM is able to calculate the most likely CME arrival times and speeds, quantify the prediction uncertainties and determine the confidence intervals. A new DBEMv3 version is described in detail and evaluated for the first time determing the DBEMv3 performance and errors by using various CME-ICME lists as well as it is compared with previous DBEM versions. The analysis to find the optimal drag parameter $γ$ and ambient solar wind speed $w$ showed that somewhat higher values ($γ\approx 0.3 \times 10^{-7}$ km$^{-1}$, $w \approx$ 425 km\,s$^{-1}$) for both of these DBEM input parameters should be used for the evaluation compared to the previously employed ones. Based on the evaluation performed for 146 CME-ICME pairs, the DBEMv3 performance with mean error (ME) of -11.3 h, mean absolute error (MAE) of 17.3 h was obtained. There is a clear bias towards the negative prediction errors where the fast CMEs are predicted to arrive too early, probably due to the model physical limitations and input errors (e.g. CME launch speed). △ Less

Submitted 14 July, 2021; originally announced July 2021.

Journal ref: Solar Physics 2021

Drag-based model (DBM) tools for forecast of coronal mass ejection arrival time and speed

Authors: Mateja Dumbovic, Jasa Calogovic, Karmen Martinic, Bojan Vrsnak, Davor Sudar, Manuela Temmer, Astrid Veronig

Abstract: Forecasting the arrival time of CMEs and their associated shocks is one of the key aspects of space weather research. One of the commonly used models is, due to its simplicity and calculation speed, the analytical drag-based model (DBM) for heliospheric propagation of CMEs. DBM relies on the observational fact that slow CMEs accelerate whereas fast CMEs decelerate, and is based on the concept of M… ▽ More Forecasting the arrival time of CMEs and their associated shocks is one of the key aspects of space weather research. One of the commonly used models is, due to its simplicity and calculation speed, the analytical drag-based model (DBM) for heliospheric propagation of CMEs. DBM relies on the observational fact that slow CMEs accelerate whereas fast CMEs decelerate, and is based on the concept of MHD drag, which acts to adjust the CME speed to the ambient solar wind. Although physically DBM is applicable only to the CME magnetic structure, it is often used as a proxy for the shock arrival. In recent years, the DBM equation has been used in many studies to describe the propagation of CMEs and shocks with different geometries and assumptions. Here we give an overview of the five DBM versions currently available and their respective tools, developed at Hvar Observatory and frequently used by researchers and forecasters. These include: 1) basic 1D DBM, a 1D model describing the propagation of a single point (i.e. the apex of the CME) or concentric arc (where all points propagate identically); 2) advanced 2D self-similar cone DBM, a 2D model which combines basic DBM and cone geometry describing the propagation of the CME leading edge which evolves self-similarly; 3) 2D flattening cone DBM, a 2D model which combines basic DBM and cone geometry describing the propagation of the CME leading edge which does not evolve self-similarly; 4) DBEM, an ensemble version of the 2D flattening cone DBM which uses CME ensembles as an input and 5) DBEMv3, an ensemble version of the 2D flattening cone DBM which creates CME ensembles based on the input uncertainties. All five versions have been tested and published in recent years and are available online or upon request. We provide an overview of these five tools, of their similarities and differences, as well as discuss and demonstrate their application. △ Less

Submitted 26 March, 2021; originally announced March 2021.

Comments: 21 pages, 4 figures, 2 tables, accepted in Frontiers March 24th 2021

Coronal Hole Detection and Open Magnetic Flux

Authors: J. A. Linker, S. G. Heinemann, M. Temmer, M. J. Owens, R. M. Caplan, C. N. Arge, E. Asvestari, V. Delouille, C. Downs, S. J. Hofmeister, I. C. Jebaraj, M. Madjarska, R. Pinto, J. Pomoell, E. Samara, C. Scolini, B. Vrsnak

Abstract: Many scientists use coronal hole (CH) detections to infer open magnetic flux. Detection techniques differ in the areas that they assign as open, and may obtain different values for the open magnetic flux. We characterize the uncertainties of these methods, by applying six different detection methods to deduce the area and open flux of a near-disk center CH observed on 9/19/2010, and applying a sin… ▽ More Many scientists use coronal hole (CH) detections to infer open magnetic flux. Detection techniques differ in the areas that they assign as open, and may obtain different values for the open magnetic flux. We characterize the uncertainties of these methods, by applying six different detection methods to deduce the area and open flux of a near-disk center CH observed on 9/19/2010, and applying a single method to five different EUV filtergrams for this CH. Open flux was calculated using five different magnetic maps. The standard deviation (interpreted as the uncertainty) in the open flux estimate for this CH was about 26%. However, including the variability of different magnetic data sources, this uncertainty almost doubles to 45%. We use two of the methods to characterize the area and open flux for all CHs in this time period. We find that the open flux is greatly underestimated compared to values inferred from in-situ measurements (by 2.2-4 times). We also test our detection techniques on simulated emission images from a thermodynamic MHD model of the solar corona. We find that the methods overestimate the area and open flux in the simulated CH, but the average error in the flux is only about 7%. The full-Sun detections on the simulated corona underestimate the model open flux, but by factors well below what is needed to account for the missing flux in the observations. Under-detection of open flux in coronal holes likely contributes to the recognized deficit in solar open flux, but is unlikely to resolve it. △ Less

Submitted 9 March, 2021; originally announced March 2021.

Comments: 28 pages, 10 figures, submitted to ApJ

Earth-affecting Solar Transients: A Review of Progresses in Solar Cycle 24

Authors: Jie Zhang, Manuela Temmer, Nat Gopalswamy, Olga Malandraki, Nariaki V. Nitta, Spiros Patsourakos, Fang Shen, Bojan Vršnak, Yuming Wang, David Webb, Mihir I. Desai, Karin Dissauer, Nina Dresing, Mateja Dumbović, Xueshang Feng, Stephan G. Heinemann, Monica Laurenza, Noé Lugaz, Bin Zhuang

Abstract: This review article summarizes the advancement in the studies of Earth-affecting solar transients in the last decade that encompasses most of solar cycle 24. The Sun Earth is an integrated physical system in which the space environment of the Earth sustains continuous influence from mass, magnetic field and radiation energy output of the Sun in varying time scales from minutes to millennium. This… ▽ More This review article summarizes the advancement in the studies of Earth-affecting solar transients in the last decade that encompasses most of solar cycle 24. The Sun Earth is an integrated physical system in which the space environment of the Earth sustains continuous influence from mass, magnetic field and radiation energy output of the Sun in varying time scales from minutes to millennium. This article addresses short time scale events, from minutes to days that directly cause transient disturbances in the Earth space environment and generate intense adverse effects on advanced technological systems of human society. Such transient events largely fall into the following four types: (1) solar flares, (2) coronal mass ejections (CMEs) including their interplanetary counterparts ICMEs, (3) solar energetic particle (SEP) events, and (4) stream interaction regions (SIRs) including corotating interaction regions (CIRs). In the last decade, the unprecedented multi viewpoint observations of the Sun from space, enabled by STEREO Ahead/Behind spacecraft in combination with a suite of observatories along the Sun-Earth lines, have provided much more accurate and global measurements of the size, speed, propagation direction and morphology of CMEs in both 3-D and over a large volume in the heliosphere. Several advanced MHD models have been developed to simulate realistic CME events from the initiation on the Sun until their arrival at 1 AU. Much progress has been made on detailed kinematic and dynamic behaviors of CMEs, including non-radial motion, rotation and deformation of CMEs, CME-CME interaction, and stealth CMEs and problematic ICMEs. The knowledge about SEPs has also been significantly improved. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Comments: Review article, 184 pages

Deriving CME density from remote sensing data and comparison to in-situ measurements

Authors: M. Temmer, L. Holzknecht, M. Dumbovic, B. Vrsnak, N. Sachdeva, S. G. Heinemann, K. Dissauer, C. Scolini, E. Asvestari, A. M. Veronig, S. J. Hofmeister

Abstract: We determine the 3D geometry and deprojected mass of 29 well-observed coronal mass ejections (CMEs) and their interplanetary counterparts (ICMEs) using combined STEREO-SOHO white-light data. From the geometry parameters we calculate the volume of the CME for the magnetic ejecta (flux-rope type geometry) and sheath structure (shell-like geometry resembling the (I)CME frontal rim). Working under the… ▽ More We determine the 3D geometry and deprojected mass of 29 well-observed coronal mass ejections (CMEs) and their interplanetary counterparts (ICMEs) using combined STEREO-SOHO white-light data. From the geometry parameters we calculate the volume of the CME for the magnetic ejecta (flux-rope type geometry) and sheath structure (shell-like geometry resembling the (I)CME frontal rim). Working under the assumption that the CME mass is roughly equally distributed within a specific volume, we expand the CME self-similarly and calculate the CME density for distances close to the Sun (15-30 Rs) and at 1AU. Specific trends are derived comparing calculated and in-situ measured proton densities at 1AU, though large uncertainties are revealed due to the unknown mass and geometry evolution: i) a moderate correlation for the magnetic structure having a mass that stays rather constant (~0.56-0.59), and ii) a weak correlation for the sheath density (~0.26) by assuming the sheath region is an extra mass - as expected for a mass pile-up process - that is in its amount comparable to the initial CME deprojected mass. High correlations are derived between in-situ measured sheath density and the solar wind density (~ -0.73) and solar wind speed (~0.56) as measured 24 hours ahead of the arrival of the disturbance. This gives additional confirmation that the sheath-plasma indeed stems from piled-up solar wind material. While the CME interplanetary propagation speed is not related to the sheath density, the size of the CME may play some role in how much material could be piled up. △ Less

Submitted 13 November, 2020; originally announced November 2020.

Sun-to-Earth Observations and Characteristics of Isolated Earth-Impacting Interplanetary Coronal Mass Ejections During 2008-2014

Authors: Darije Maričić, Bojan Vršnak, Astrid Veronig, Mateja Dumbović, Filip Šterc, Dragan Roša, Mile Karlica, Damir Hržina, Ivan Romštajn

Abstract: A sample of isolated Earth-impacting ICMEs that occurred in the period January 2008 to August 2014 is analysed in order to study in detail the ICME in situ signatures with respect to the type of filament eruption related to the corresponding CME. For Earth-directed CMEs, a kinematical study was performed using the STEREO-A, B COR1 and COR2 coronagraphs and the Heliospheric Imagers HI1. Based on th… ▽ More A sample of isolated Earth-impacting ICMEs that occurred in the period January 2008 to August 2014 is analysed in order to study in detail the ICME in situ signatures with respect to the type of filament eruption related to the corresponding CME. For Earth-directed CMEs, a kinematical study was performed using the STEREO-A, B COR1 and COR2 coronagraphs and the Heliospheric Imagers HI1. Based on the extrapolated CME kinematics, we identified interacting CMEs, which were excluded from further analysis. Applying this approach, a set of 31 isolated Earth-impacting CMEs was unambiguously identified and related to the in situ measurements recorded by the Wind spacecraft. We classified the events into subsets with respect to the CME source location as well as with respect to the type of the associated filament eruption. Hence, the events are divided into three subsamples: active region (AR) CMEs, disappearing filament (DSF) CMEs, and stealthy CMEs. The related three groups of ICMEs were further divided into two subsets: magnetic obstacle (MO) events (out of which four were stealthy), covering ICMEs that at least partly expose characteristics of flux ropes, and ejecta (EJ) events, not showing such characteristics. In the next step, MO-events were analysed in more detail, considering the magnetic field strengths and the plasma characteristics in three different segments of the ICMEs, defined as the turbulent sheath (TS), the frontal region (FR), and the MO itself. The analysis revealed various well-defined correlations for AR, DSF, and stealthy ICMEs, which we interpreted considering basic physical concepts. Our results support the hypothesis that ICMEs show different signatures depending on the in situ spacecraft trajectory, in terms of apex versus flank hits. △ Less

Submitted 24 August, 2020; originally announced August 2020.

Comments: 22 pages, 9 figures

Journal ref: 2020, papers published in Solar Physics

Solar Flare-CME Coupling Throughout Two Acceleration Phases of a Fast CME

Authors: Tingyu Gou, Astrid M. Veronig, Rui Liu, Bin Zhuang, Mateja Dumbovic, Tatiana Podladchikova, Hamish A. S. Reid, Manuela Temmer, Karin Dissauer, Bojan Vrsnak, Yuming Wang

Abstract: Solar flares and coronal mass ejections (CMEs) are closely coupled through magnetic reconnection. CMEs are usually accelerated impulsively within the low solar corona, synchronized with the impulsive flare energy release. We investigate the dynamic evolution of a fast CME and its associated X2.8 flare occurring on 2013 May 13. The CME experiences two distinct phases of enhanced acceleration, an im… ▽ More Solar flares and coronal mass ejections (CMEs) are closely coupled through magnetic reconnection. CMEs are usually accelerated impulsively within the low solar corona, synchronized with the impulsive flare energy release. We investigate the dynamic evolution of a fast CME and its associated X2.8 flare occurring on 2013 May 13. The CME experiences two distinct phases of enhanced acceleration, an impulsive one with a peak value of ~5 km s$^{-2}$ followed by an extended phase with accelerations up to 0.7 km s$^{-2}$. The two-phase CME dynamics is associated with a two-episode flare energy release. While the first episode is consistent with the "standard" eruption of a magnetic flux rope, the second episode of flare energy release is initiated by the reconnection of a large-scale loop in the aftermath of the eruption and produces stronger nonthermal emission up to $γ$-rays. In addition, this long-duration flare reveals clear signs of ongoing magnetic reconnection during the decay phase, evidenced by extended HXR bursts with energies up to 100--300 keV and intermittent downflows of reconnected loops for >4 hours. The observations reveal that the two-step flare reconnection substantially contributes to the two-phase CME acceleration, and the impulsive CME acceleration precedes the most intense flare energy release. The implications of this non-standard flare/CME observation are discussed. △ Less

Submitted 20 June, 2020; originally announced June 2020.

Comments: accepted for publication in ApJL

Evolution of coronal mass ejections and the corresponding Forbush decreases: modelling vs multi-spacecraft observations

Authors: Mateja Dumbović, Bojan Vršnak, **gnan Guo, Bernd Heber, Karin Dissauer, Fernando Carcaboso, Manuela Temmer, Astrid Veronig, Tatiana Podladchikova, Christian Möstl, Tanja Amerstorfer, Anamarija Kirin

Abstract: One of the very common in situ signatures of interplanetary coronal mass ejections (ICMEs), as well as other interplanetary transients, are Forbush decreases (FDs), i.e. short-term reductions in the galactic cosmic ray (GCR) flux. A two-step FD is often regarded as a textbook example, which presumably owes its specific morphology to the fact that the measuring instrument passed through the ICME he… ▽ More One of the very common in situ signatures of interplanetary coronal mass ejections (ICMEs), as well as other interplanetary transients, are Forbush decreases (FDs), i.e. short-term reductions in the galactic cosmic ray (GCR) flux. A two-step FD is often regarded as a textbook example, which presumably owes its specific morphology to the fact that the measuring instrument passed through the ICME head-on, encountering first the shock front (if developed), then the sheath and finally the CME magnetic structure. The interaction of GCRs and the shock/sheath region, as well as the CME magnetic structure, occurs all the way from Sun to Earth, therefore, FDs are expected to reflect the evolutionary properties of CMEs and their sheaths. We apply modelling to different ICME regions in order to obtain a generic two-step FD profile, which qualitatively agrees with our current observation-based understanding of FDs. We next adapt the models for energy dependence to enable comparison with different GCR measurement instruments (as they measure in different particle energy ranges). We test these modelling efforts against a set of multi-spacecraft observations of the same event, using the Forbush decrease model for the expanding flux rope (ForbMod). We find a reasonable agreement of the ForbMod model for the GCR depression in the CME magnetic structure with multi-spacecraft measurements, indicating that modelled FDs reflect well the CME evolution. △ Less

Submitted 3 June, 2020; originally announced June 2020.

Comments: 40 pages, 11 figures, accepted in Solar Physics

On the Interaction of Galactic Cosmic Rays with Heliospheric Shocks During Forbush Decreases

Authors: Anamarija Kirin, Bojan Vršnak, Mateja Dumbović, Bernd Heber

Abstract: Forbush decreases (FDs) are depletions in the galactic cosmic ray (GCR) count rate that last typically for about a week and can be caused by coronal mass ejections (CMEs) or corotating interacting regions (CIRs). Fast CMEs that drive shocks cause large FDs that often show a two-step decrease where the first step is attributed to the shock/sheath region, while the second step is attributed to the c… ▽ More Forbush decreases (FDs) are depletions in the galactic cosmic ray (GCR) count rate that last typically for about a week and can be caused by coronal mass ejections (CMEs) or corotating interacting regions (CIRs). Fast CMEs that drive shocks cause large FDs that often show a two-step decrease where the first step is attributed to the shock/sheath region, while the second step is attributed to the closed magnetic structure. Since the difference in size of shock and sheath region is significant, and since there are observed effects that can be related to shocks and not necessarily to the sheath region we expect that the physical mechanisms governing the interaction with GCRs in these two regions are different. We therefore aim to analyse interaction of GCRs with heliospheric shocks only. We approximate the shock by a structure where the magnetic field linearly changes with position within this structure. We assume protons of different energy, different pitch angle and different incoming direction. We also vary the shock parameters such as the magnetic field strength and orientation, as well as the shock thickness. The results demonstrate that protons with higher energies are less likely to be reflected. Also, thicker shocks and shocks with stronger field reflect protons more efficiently. △ Less

Submitted 13 February, 2020; originally announced February 2020.

CME volume calculation from 3D GCS reconstruction

Authors: L. Holzknecht, M. Temmer, M. Dumbovic, S. Wellenzohn, K. Krikova, S. G. Heinemann, M. Rodari, B. Vrsnak, A. M. Veronig

Abstract: The mass evolution of a coronal mass ejection (CME) is an important parameter characterizing the drag force acting on a CME as it propagates through interplanetary space. Spacecraft measure in-situ plasma densities of CMEs during crossing events, but for investigating the mass evolution, we also need to know the CME geometry, more specific, its volume. Having derived the CME volume and mass from r… ▽ More The mass evolution of a coronal mass ejection (CME) is an important parameter characterizing the drag force acting on a CME as it propagates through interplanetary space. Spacecraft measure in-situ plasma densities of CMEs during crossing events, but for investigating the mass evolution, we also need to know the CME geometry, more specific, its volume. Having derived the CME volume and mass from remote sensing data using 3D reconstructed CME geometry, we can calculate the CME density and compare it with in-situ proton density measurements near Earth. From that we may draw important conclusions on a possible mass increase as the CME interacts with the ambient solar wind in the heliosphere. In this paper we will describe in detail the method for deriving the CME volume using the graduated cylindrical shell (GCS) model (Thernisien et al., 2006,2009, see Figure 1). We show that, assuming self-similar expansion, one can derive the volume of the CME from two GCS parameters and that it furthermore can be expressed as a function of distance. △ Less

Submitted 25 April, 2019; originally announced April 2019.

Comments: accepted for publication in the Central European Astrophysical Bulletin (CEAB)

Heliospheric Evolution of Magnetic Clouds

Authors: Bojan Vršnak, Tanja Amerstorfer, Mateja Dumbović, Martin Leitner, Astrid M. Veronig, Manuela Temmer, Christian Möstl, Ute V. Amerstorfer, Charles J. Farrugia, Antoinette B. Galvin

Abstract: Interplanetary evolution of eleven magnetic clouds (MCs) recorded by at least two radially aligned spacecraft is studied. The in situ magnetic field measurements are fitted to a cylindrically symmetric Gold-Hoyle force-free uniform-twist flux-rope configuration. The analysis reveals that in a statistical sense the expansion of studied MCs is compatible with self-similar behavior. However, individu… ▽ More Interplanetary evolution of eleven magnetic clouds (MCs) recorded by at least two radially aligned spacecraft is studied. The in situ magnetic field measurements are fitted to a cylindrically symmetric Gold-Hoyle force-free uniform-twist flux-rope configuration. The analysis reveals that in a statistical sense the expansion of studied MCs is compatible with self-similar behavior. However, individual events expose a large scatter of expansion rates, ranging from very weak to very strong expansion. Individually, only four events show an expansion rate compatible with the isotropic self-similar expansion. The results indicate that the expansion has to be much stronger when MCs are still close to the Sun than in the studied 0.47 - 4.8 AU distance range. The evolution of the magnetic field strength shows a large deviation from the behavior expected for the case of an isotropic self-similar expansion. In the statistical sense, as well as in most of the individual events, the inferred magnetic field decreases much slower than expected. Only three events show a behavior compatible with a self-similar expansion. There is also a discrepancy between the magnetic field decrease and the increase of the MC size, indicating that magnetic reconnection and geometrical deformations play a significant role in the MC evolution. About half of the events show a decay of the electric current as expected for the self-similar expansion. Statistically, the inferred axial magnetic flux is broadly consistent with it remaining constant. However, events characterized by large magnetic flux show a clear tendency of decreasing flux. △ Less

Submitted 17 April, 2019; originally announced April 2019.

Comments: 64 pages, 10 figures

Numerical Simulation of Coronal Waves Interacting with Coronal Holes: III. Dependence on Initial Amplitude of the Incoming Wave

Authors: Isabell Piantschitsch, Bojan Vrsnak, Arnold Hanslmeier, Birgit Lemmerer, Astrid Veronig, Aaron Hernandez-Perez, Jasa Calogovic

Abstract: We performed 2.5D magnetohydrodynamic (MHD) simulations showing the propagation of fast-mode MHD waves of different initial amplitudes and their interaction with a coronal hole (CH), using our newly developed numerical code. We find that this interaction results in, first, the formation of reflected, traversing and transmitted waves (collectively, secondary waves) and, second, in the appearance of… ▽ More We performed 2.5D magnetohydrodynamic (MHD) simulations showing the propagation of fast-mode MHD waves of different initial amplitudes and their interaction with a coronal hole (CH), using our newly developed numerical code. We find that this interaction results in, first, the formation of reflected, traversing and transmitted waves (collectively, secondary waves) and, second, in the appearance of stationary features at the CH boundary. Moreover, we observe a density depletion that is moving in the opposite direction to the incoming wave. We find a correlation between the initial amplitude of the incoming wave and the amplitudes of the secondary waves as well as the peak values of the stationary features. Additionally, we compare the phase speed of the secondary waves and the lifetime of the stationary features to observations. Both effects obtained in the simulation, the evolution of secondary waves, as well as the formation of stationary fronts at the CH boundary, strongly support the theory that coronal waves are fast-mode MHD waves. △ Less

Submitted 30 November, 2018; originally announced November 2018.

Journal ref: The Astrophysical Journal, Volume 860, Issue 1, article id. 24, 17 pp. (2018)

Numerical Simulation of Coronal Waves Interacting with Coronal Holes: II. Dependence on Alfvén Speed Inside the Coronal Hole

Authors: Isabell Piantschitsch, Bojan Vrsnak, Arnold Hanslmeier, Birgit Lemmerer, Astrid Veronig, Aaron Hernandez-Perez, Jasa Calogovic

Abstract: We used our newly developed magnetohydrodynamic (MHD) code to perform 2.5D simulations of a fast-mode MHD wave interacting with coronal holes (CH) of varying Alfvén speed which result from assuming different CH densities. We find that this interaction leads to effects like reflection, transmission, stationary fronts at the CH boundary and the formation of a density depletion that moves in the oppo… ▽ More We used our newly developed magnetohydrodynamic (MHD) code to perform 2.5D simulations of a fast-mode MHD wave interacting with coronal holes (CH) of varying Alfvén speed which result from assuming different CH densities. We find that this interaction leads to effects like reflection, transmission, stationary fronts at the CH boundary and the formation of a density depletion that moves in the opposite direction to the incoming wave. We compare these effects with regard to the different CH densities and present a comprehensive analysis of morphology and kinematics of the associated secondary waves. We find that the density value inside the CH influences the phase speed as well as the amplitude values of density and magnetic field for all different secondary waves. Moreover, we observe a correlation between the CH density and the peak values of the stationary fronts at the CH boundary. The findings of reflection and transmission on the one hand and the formation of stationary fronts caused by the interaction of MHD waves with CHs on the other hand, strongly support the theory that large scale disturbances in the corona are fast-mode MHD waves. △ Less

Submitted 30 November, 2018; originally announced November 2018.

Journal ref: The Astrophysical Journal, Volume 857, Issue 2, article id. 130, 16 pp. (2018)

Numerical Simulation of Coronal Waves interacting with Coronal Holes: I. Basic Features

Authors: Isabell Piantschitsch, Bojan Vrsnak, Arnold Hanslmeier, Birgit Lemmerer, Astrid Veronig, Aaron Hernandez-Perez, Jasa Calogovic, Tomislav Zic

Abstract: We developed a new numerical code that is able to perform 2.5D simulations of a magnetohydrodynamic (MHD) wave propagation in the corona, and its interaction with a low density region, such as a coronal hole (CH). We show that the impact of the wave on the CH leads to different effects, such as reflection and transmission of the incoming wave, stationary features at the CH boundary, or formation o… ▽ More We developed a new numerical code that is able to perform 2.5D simulations of a magnetohydrodynamic (MHD) wave propagation in the corona, and its interaction with a low density region, such as a coronal hole (CH). We show that the impact of the wave on the CH leads to different effects, such as reflection and transmission of the incoming wave, stationary features at the CH boundary, or formation of a density depletion. We present a comprehensive analysis of the morphology and kinematics of primary and secondary waves, that is, we describe in detail the temporal evolution of density, magnetic field, plasma flow velocity, phase speed and position of the wave amplitude. Effects like reflection, refraction and transmission of the wave strongly support the theory that large scale disturbances in the corona are fast MHD waves and build the major distinction to the competing pseudo-wave theory. The formation of stationary bright fronts was one of the main reasons for the development of pseudo-waves. Here we show that stationary bright fronts can be produced by the interactions of an MHD wave with a CH. We find secondary waves that are traversing through the CH and we show that one part of these traversing waves leaves the CH again, while another part is being reflected at the CH boundary inside the CH. We observe a density depletion that is moving in the opposite direction of the primary wave propagation. We show that the primary wave pushes the CH boundary to the right, caused by the wave front exerting dynamic pressure on the CH. △ Less

Submitted 29 November, 2018; originally announced November 2018.

Journal ref: The Astrophysical Journal, Volume 850, Issue 1, article id. 88, 12 pp. (2017)

Genesis and impulsive evolution of the 2017 September 10 coronal mass ejection

Authors: Astrid M. Veronig, Tatiana Podladchikova, Karin Dissauer, Manuela Temmer, Daniel B. Seaton, David Long, **gnan Guo, Bojan Vrsnak, Louise Harra, Bernhard Kliem

Abstract: The X8.2 event of 10 September 2017 provides unique observations to study the genesis, magnetic morphology and impulsive dynamics of a very fast CME. Combining GOES-16/SUVI and SDO/AIA EUV imagery, we identify a hot ($T\approx 10-15$ MK) bright rim around a quickly expanding cavity, embedded inside a much larger CME shell ($T\approx 1-2$ MK). The CME shell develops from a dense set of large AR loo… ▽ More The X8.2 event of 10 September 2017 provides unique observations to study the genesis, magnetic morphology and impulsive dynamics of a very fast CME. Combining GOES-16/SUVI and SDO/AIA EUV imagery, we identify a hot ($T\approx 10-15$ MK) bright rim around a quickly expanding cavity, embedded inside a much larger CME shell ($T\approx 1-2$ MK). The CME shell develops from a dense set of large AR loops ($\gtrsim$0.5 $R_s$), and seamlessly evolves into the CME front observed in LASCO C2. The strong lateral overexpansion of the CME shell acts as a piston initiating the fast EUV wave. The hot cavity rim is demonstrated to be a manifestation of the dominantly poloidal flux and frozen-in plasma added to the rising flux rope by magnetic reconnection in the current sheet beneath. The same structure is later observed as the core of the white light CME, challenging the traditional interpretation of the CME three-part morphology. The large amount of added magnetic flux suggested by these observations explains the extreme accelerations of the radial and lateral expansion of the CME shell and cavity, all reaching values of $5 - 10$ km s$^{-2}$. The acceleration peaks occur simultaneously with the first RHESSI $100-300$ keV hard X-ray burst of the associated flare, further underlining the importance of the reconnection process for the impulsive CME evolution. Finally, the much higher radial propagation speed of the flux rope in relation to the CME shell causes a distinct deformation of the white light CME front and shock. △ Less

Submitted 22 October, 2018; originally announced October 2018.

Comments: Accepted for publication in the Astrophysical Journal

An Analytical Diffusion-Expansion Model for Forbush Decreases Caused by Flux Ropes

Authors: Mateja Dumbović, Bernd Heber, Bojan Vršnak, Manuela Temmer, Anamarija Kirin

Abstract: We present an analytical diffusion-expansion Forbush decrease (FD) model ForbMod which is based on the widely used approach of the initially empty, closed magnetic structure (i.e. flux rope) which fills up slowly with particles by perpendicular diffusion. The model is restricted to explain only the depression caused by the magnetic structure of the interplanetary coronal mass ejection (ICME). We u… ▽ More We present an analytical diffusion-expansion Forbush decrease (FD) model ForbMod which is based on the widely used approach of the initially empty, closed magnetic structure (i.e. flux rope) which fills up slowly with particles by perpendicular diffusion. The model is restricted to explain only the depression caused by the magnetic structure of the interplanetary coronal mass ejection (ICME). We use remote CME observations and a 3D reconstruction method (the Graduated Cylindrical Shell method) to constrain initial boundary conditions of the FD model and take into account CME evolutionary properties by incorporating flux rope expansion. Several flux rope expansion modes are considered, which can lead to different FD characteristics. In general, the model is qualitatively in agreement with observations, whereas quantitative agreement depends on the diffusion coefficient and the expansion properties (interplay of the diffusion and the expansion). A case study was performed to explain the FD observed 2014 May 30. The observed FD was fitted quite well by ForbMod for all expansion modes using only the diffusion coefficient as a free parameter, where the diffusion parameter was found to correspond to expected range of values. Our study shows that in general the model is able to explain the global properties of FD caused by FR and can thus be used to help understand the underlying physics in case studies. △ Less

Submitted 2 May, 2018; originally announced May 2018.

Comments: 20 pages, 8 figures

The Dependence of the Peak Velocity of High-Speed Solar Wind Streams as Measured in the Ecliptic by ACE and the STEREO satellites on the Area and Co-Latitude of their Solar Source Coronal Holes

Authors: Stefan J. Hofmeister, Astrid Veronig, Manuela Temmer, Susanne Vennerstrom, Bernd Heber, Bojan Vršnak

Abstract: We study the properties of 115 coronal holes in the time-range from 2010/08 to 2017/03, the peak velocities of the corresponding high-speed streams as measured in the ecliptic at 1 AU, and the corresponding changes of the Kp index as marker of their geo-effectiveness. We find that the peak velocities of high-speed streams depend strongly on both the ar- eas and the co-latitudes of their solar sour… ▽ More We study the properties of 115 coronal holes in the time-range from 2010/08 to 2017/03, the peak velocities of the corresponding high-speed streams as measured in the ecliptic at 1 AU, and the corresponding changes of the Kp index as marker of their geo-effectiveness. We find that the peak velocities of high-speed streams depend strongly on both the ar- eas and the co-latitudes of their solar source coronal holes with regard to the heliospheric latitude of the satellites. Therefore, the co-latitude of their source coronal hole is an im- portant parameter for the prediction of the high-speed stream properties near the Earth. We derive the largest solar wind peak velocities normalized to the coronal hole areas for coronal holes located near the solar equator, and that they linearly decrease with increas- ing latitudes of the coronal holes. For coronal holes located at latitudes & 60°, they turn statistically to zero, indicating that the associated high-speed streams have a high chance to miss the Earth. Similar, the Kp index per coronal hole area is highest for the coronal holes located near the solar equator and strongly decreases with increasing latitudes of the coronal holes. We interpret these results as an effect of the three-dimensional propaga- tion of high-speed streams in the heliosphere, i.e., high-speed streams arising from coro- nal holes near the solar equator propagate in direction towards and directly hit the Earth, whereas solar wind streams arising from coronal holes at higher solar latitudes only graze or even miss the Earth. △ Less

Submitted 26 April, 2018; v1 submitted 25 April, 2018; originally announced April 2018.

Journal ref: Journal of Geophysical Research: Space Physics (2018), 123, 1738 - 1753

Drag-Based Ensemble Model (DBEM) for Coronal Mass Ejection Propagation

Authors: Mateja Dumbović, Jaša Čalogović, Bojan Vršnak, Manuela Temmer, M. Leila Mays, Astrid Veronig, Isabell Piantschitsch

Abstract: The drag-based model (DBM) for heliospheric propagation of coronal mass ejections (CMEs) is a widely used analytical model which can predict CME arrival time and speed at a given heliospheric location. It is based on the assumption that the propagation of CMEs in interplanetary space is solely under the influence of magnetohydrodynamical drag, where CME propagation is determined based on CME initi… ▽ More The drag-based model (DBM) for heliospheric propagation of coronal mass ejections (CMEs) is a widely used analytical model which can predict CME arrival time and speed at a given heliospheric location. It is based on the assumption that the propagation of CMEs in interplanetary space is solely under the influence of magnetohydrodynamical drag, where CME propagation is determined based on CME initial properties as well as the properties of the ambient solar wind. We present an upgraded version, covering ensemble modelling to produce a distribution of possible ICME arrival times and speeds, the drag-based ensemble model (DBEM). Multiple runs using uncertainty ranges for the input values can be performed in almost real-time, within a few minutes. This allows us to define the most likely ICME arrival times and speeds, quantify prediction uncertainties and determine forecast confidence. The performance of the DBEM is evaluated and compared to that of ensemble WSA-ENLIL+Cone model (ENLIL) using the same sample of events. It is found that the mean error is $ME=-9.7$ hours, mean absolute error $MAE=14.3$ hours and root mean square error $RMSE=16.7$ hours, which is somewhat higher than, but comparable to ENLIL errors ($ME=-6.1$ hours, $MAE=12.8$ hours and $RMSE=14.4$ hours). Overall, DBEM and ENLIL show a similar performance. Furthermore, we find that in both models fast CMEs are predicted to arrive earlier than observed, most probably owing to the physical limitations of models, but possibly also related to an overestimation of the CME initial speed for fast CMEs. △ Less

Submitted 23 January, 2018; originally announced January 2018.

Comments: 15 pages, 8 figures

The origin, early evolution and predictability of solar eruptions

Authors: Lucie Green, Tibor Torok, Bojan Vrsnak, Ward Manchester IV, Astrid Veronig

Abstract: Coronal mass ejections (CMEs) were discovered in the early 1970s when space-borne coronagraphs revealed that eruptions of plasma are ejected from the Sun. Today, it is known that the Sun produces eruptive flares, filament eruptions, coronal mass ejections and failed eruptions; all thought to be due to a release of energy stored in the coronal magnetic field during its drastic reconfiguration. This… ▽ More Coronal mass ejections (CMEs) were discovered in the early 1970s when space-borne coronagraphs revealed that eruptions of plasma are ejected from the Sun. Today, it is known that the Sun produces eruptive flares, filament eruptions, coronal mass ejections and failed eruptions; all thought to be due to a release of energy stored in the coronal magnetic field during its drastic reconfiguration. This review discusses the observations and physical mechanisms behind this eruptive activity, with a view to making an assessment of the current capability of forecasting these events for space weather risk and impact mitigation. Whilst a wealth of observations exist, and detailed models have been developed, there still exists a need to draw these approaches together. In particular more realistic models are encouraged in order to asses the full range of complexity of the solar atmosphere and the criteria for which an eruption is formed. From the observational side, a more detailed understanding of the role of photospheric flows and reconnection is needed in order to identify the evolutionary path that ultimately means a magnetic structure will erupt. △ Less

Submitted 14 January, 2018; originally announced January 2018.

Comments: 65 pages, 8 figures, accepted by Space Science Reviews

Using Forbush decreases to derive the transit time of ICMEs propagating from 1 AU to Mars

Authors: Johan L. Freiherr von Forstner, **gnan Guo, Robert F. Wimmer-Schweingruber, Donald M. Hassler, Manuela Temmer, Mateja Dumbović, Lan K. Jian, Jan K. Appel, Jaša Čalogović, Bent Ehresmann, Bernd Heber, Henning Lohf, Arik Posner, Christian T. Steigies, Bojan Vršnak, Cary J. Zeitlin

Abstract: The propagation of 15 interplanetary coronal mass ejections (ICMEs) from Earth's orbit (1 AU) to Mars (~ 1.5 AU) has been studied with their propagation speed estimated from both measurements and simulations. The enhancement of magnetic fields related to ICMEs and their shock fronts cause the so-called Forbush decrease, which can be de- tected as a reduction of galactic cosmic rays measured on-gro… ▽ More The propagation of 15 interplanetary coronal mass ejections (ICMEs) from Earth's orbit (1 AU) to Mars (~ 1.5 AU) has been studied with their propagation speed estimated from both measurements and simulations. The enhancement of magnetic fields related to ICMEs and their shock fronts cause the so-called Forbush decrease, which can be de- tected as a reduction of galactic cosmic rays measured on-ground. We have used galactic cosmic ray (GCR) data from in-situ measurements at Earth, from both STEREO A and B as well as GCR measurements by the Radiation Assessment Detector (RAD) instrument onboard Mars Science Laboratory (MSL) on the surface of Mars. A set of ICME events has been selected during the periods when Earth (or STEREO A or B) and Mars locations were nearly aligned on the same side of the Sun in the ecliptic plane (so-called opposition phase). Such lineups allow us to estimate the ICMEs' transit times between 1 and 1.5 AU by estimating the delay time of the corresponding Forbush decreases measured at each location. We investigate the evolution of their propagation speeds before and after passing Earth's orbit and find that the deceleration of ICMEs due to their interaction with the ambient solar wind may continue beyond 1 AU. We also find a substantial variance of the speed evolution among different events revealing the dynamic and diverse nature of eruptive solar events. Furthermore, the results are compared to simulation data obtained from two CME propagation models, namely the Drag-Based Model and ENLIL plus cone model. △ Less

Submitted 19 December, 2017; originally announced December 2017.

Characteristics of Low-Latitude Coronal Holes near the Maximum of Solar cycle 24

Authors: S. J. Hofmeister, A. Veronig, M. A. Reiss, M. Temmer, S. Vennerstrom, B. Vršnak, B. Heber

Abstract: We investigate the statistics of 288 low-latitude coronal holes extracted from SDO/AIA-193 filtergrams over the time range 2011/01/01 to 2013/12/31. We analyse the distribution of characteristic coronal hole properties, such as the areas, mean AIA-193 intensities, and mean magnetic field densities, the local distribution of the SDO/AIA-193 intensity and the magnetic field within the coronal holes,… ▽ More We investigate the statistics of 288 low-latitude coronal holes extracted from SDO/AIA-193 filtergrams over the time range 2011/01/01 to 2013/12/31. We analyse the distribution of characteristic coronal hole properties, such as the areas, mean AIA-193 intensities, and mean magnetic field densities, the local distribution of the SDO/AIA-193 intensity and the magnetic field within the coronal holes, and the distribution of magnetic flux tubes in coronal holes. We find that the mean magnetic field density of all coronal holes under study is 3.0 +- 1.6 G, and the percentage of unbalanced magnetic flux is 49 +- 16 %. The mean magnetic field density, the mean unsigned magnetic field density, and the percentage of unbalanced magnetic flux of coronal holes depend strongly pairwise on each other, with correlation coefficients cc > 0.92. Furthermore, we find that the unbalanced magnetic flux of the coronal holes is predominantly concentrated in magnetic flux tubes: 38 % (81 %) of the unbalanced magnetic flux of coronal holes arises from only 1 % (10 %) of the coronal hole area, clustered in magnetic flux tubes with field strengths > 50 G (10 G). The average magnetic field density and the unbalanced magnetic flux derived from the magnetic flux tubes correlate with the mean magnetic field density and the unbalanced magnetic flux of the overall coronal hole (cc > 0.93). These findings give evidence that the overall magnetic characteristics of coronal holes are governed by the characteristics of the magnetic flux tubes. △ Less

Submitted 7 February, 2017; originally announced February 2017.

Comments: 15 figures

Journal ref: 2017, ApJ 835 268

Understanding the Physical Nature of Coronal "EIT Waves"

Authors: David M. Long, D. Shaun Bloomfield, Peng-Fei Chen, Cooper Downs, Peter T. Gallagher, Ryun Young Kwon, Kamalam Vanninathan, Astrid M. Veronig, Angelos Vourlidas, Bojan Vrsnak, Alexander Warmuth, Tomislav Zic

Abstract: For almost 20 years the physical nature of globally propagating waves in the solar corona (commonly called "EIT waves") has been controversial and subject to debate. Additional theories have been proposed over the years to explain observations that did not fit with the originally proposed fast-mode wave interpretation. However, the incompatibility of observations made using the Extreme-ultraviolet… ▽ More For almost 20 years the physical nature of globally propagating waves in the solar corona (commonly called "EIT waves") has been controversial and subject to debate. Additional theories have been proposed over the years to explain observations that did not fit with the originally proposed fast-mode wave interpretation. However, the incompatibility of observations made using the Extreme-ultraviolet Imaging Telescope (EIT) onboard the Solar and Heliospheric Observatory with the fast-mode wave interpretation was challenged by differing viewpoints from the twin Solar Terrestrial Relations Observatory spacecraft and higher spatial/temporal resolution data from the Solar Dynamics Observatory. In this article, we reexamine the theories proposed to explain "EIT waves" to identify measurable properties and behaviours that can be compared to current and future observations. Most of us conclude that "EIT waves" are best described as fast-mode large-amplitude waves/shocks that are initially driven by the impulsive expansion of an erupting coronal mass ejection in the low corona. △ Less

Submitted 16 November, 2016; originally announced November 2016.

Comments: 26 pages, 2 figures, accepted for publication in Solar Physics

On the Propagation of a Geoeffective Coronal Mass Ejection during March 15 -- 17, 2015

Authors: Yuming Wang, Quanhao Zhang, Jiajia Liu, Chenglong Shen, Fang Shen, Zicai Yang, T. Zic, B. Vrsnak, D. F. Webb, Rui Liu, S. Wang, Jie Zhang, Qiang Hu, Bin Zhuang

Abstract: The largest geomagnetic storm so far in the solar cycle 24 was produced by a fast coronal mass ejection (CME) originating on 2015 March 15. It was an initially west-oriented CME and expected to only cause a weak geomagnetic disturbance. Why did this CME finally cause such a large geomagnetic storm? We try to find some clues by investigating its propagation from the Sun to 1 AU. First, we reconstru… ▽ More The largest geomagnetic storm so far in the solar cycle 24 was produced by a fast coronal mass ejection (CME) originating on 2015 March 15. It was an initially west-oriented CME and expected to only cause a weak geomagnetic disturbance. Why did this CME finally cause such a large geomagnetic storm? We try to find some clues by investigating its propagation from the Sun to 1 AU. First, we reconstruct the CME's kinematic properties in the corona from the SOHO and SDO imaging data with the aid of the graduated cylindrical shell (GCS) model. It is suggested that the CME propagated to the west $\sim$$33^\circ$$\pm$$10^\circ$ away from the Sun-Earth line with a speed of about 817 km s$^{-1}$ before leaving the field of view of the SOHO/LASCO C3 camera. A magnetic cloud (MC) corresponding to this CME was measured in-situ by the Wind spacecraft two days later. By applying two MC reconstruction methods, we infer the configuration of the MC as well as some kinematic information, which implies that the CME possibly experienced an eastward deflection on its way to 1 AU. However, due to the lack of observations from the STEREO spacecraft, the CME's kinematic evolution in interplanetary space is not clear. In order to fill this gap, we utilize numerical MHD simulation, drag-based CME propagation model (DBM) and the model for CME deflection in interplanetary space (DIPS) to recover the propagation process, especially the trajectory, of the CME from $30 R_S$ to 1 AU. It is suggested that the trajectory of the CME was deflected toward the Earth by about $12^\circ$, consistent with the implication from the MC reconstruction at 1 AU. This eastward deflection probably contributed to the CME's unexpected geoeffectiveness by pushing the center of the initially west-oriented CME closer to the Earth. △ Less

Submitted 26 July, 2016; originally announced July 2016.

Comments: 10 pages, 5 figures, 1 table, accepted by JGR - Space Physics

Predicting Coronal Mass Ejections transit times to Earth with neural network

Authors: D. Sudar, B. Vršnak, M. Dumbović

Abstract: Predicting transit times of Coronal Mass Ejections (CMEs) from their initial parameters is a very important subject, not only from the scientific perspective, but also because CMEs represent a hazard for human technology. We used a neural network to analyse transit times for 153 events with only two input parameters: initial velocity of the CME, $v$, and Central Meridian Distance, CMD, of its asso… ▽ More Predicting transit times of Coronal Mass Ejections (CMEs) from their initial parameters is a very important subject, not only from the scientific perspective, but also because CMEs represent a hazard for human technology. We used a neural network to analyse transit times for 153 events with only two input parameters: initial velocity of the CME, $v$, and Central Meridian Distance, CMD, of its associated flare. We found that transit time dependence on $v$ is showing a typical drag-like pattern in the solar wind. The results show that the speed at which acceleration by drag changes to deceleration is $v\approx$500 km s$^{-1}$. Transit times are also found to be shorter for CMEs associated with flares on the western hemisphere than those originating on the eastern side of the Sun. We attribute this difference to the eastward deflection of CMEs on their path to 1 AU. The average error of the NN prediction in comparison to observations is $\approx$12 hours which is comparable to other studies on the same subject. △ Less

Submitted 24 November, 2015; originally announced November 2015.

Forbush Decrease Prediction Based on the Remote Solar Observations

Authors: Mateja Dumbovic, Bojan Vrsnak, Jasa Calogovic

Abstract: We employ remote observations of coronal mass ejections (CMEs) and the associated solar flares to forecast the CME-related Forbush decreases, i.e., short-term depressions in the galactic cosmic-ray flux. The relationship between the Forbush effect at the Earth and remote observations of CMEs and associated solar flares is studied via a statistical analysis. Relationships between Forbush decrease m… ▽ More We employ remote observations of coronal mass ejections (CMEs) and the associated solar flares to forecast the CME-related Forbush decreases, i.e., short-term depressions in the galactic cosmic-ray flux. The relationship between the Forbush effect at the Earth and remote observations of CMEs and associated solar flares is studied via a statistical analysis. Relationships between Forbush decrease magnitude and several CME/flare parameters was found, namely the initial CME speed, apparent width, source position, associated solar-flare class and the effect of successive-CME occurrence. Based on the statistical analysis, remote solar observations are employed for a Forbush-decrease forecast. For that purpose, an empirical probabilistic model is constructed that uses selected remote solar observations of CME and associated solar flare as an input, and gives expected Forbush-decrease magnitude range as an output. The forecast method is evaluated using several verification measures, indicating that as the forecast tends to be more specific it is less reliable, which is its main drawback. However, the advantages of the method are that it provides early prediction, and that the input is not necessarily spacecraft-dependent. △ Less

Submitted 12 October, 2015; originally announced October 2015.

Heliospheric Propagation of Coronal Mass Ejections: Drag-Based Model Fitting

Authors: T. Žic, B. Vršnak, M. Temmer

Abstract: The so-called drag-based model (DBM) simulates analytically the propagation of coronal mass ejections (CMEs) in interplanetary space and allows the prediction of their arrival times and impact speeds at any point in the heliosphere ("target"). The DBM is based on the assumption that beyond a distance of about 20 solar radii from the Sun, the dominant force acting on CMEs is the "aerodynamic" drag… ▽ More The so-called drag-based model (DBM) simulates analytically the propagation of coronal mass ejections (CMEs) in interplanetary space and allows the prediction of their arrival times and impact speeds at any point in the heliosphere ("target"). The DBM is based on the assumption that beyond a distance of about 20 solar radii from the Sun, the dominant force acting on CMEs is the "aerodynamic" drag force. In the standard form of DBM, the user provisionally chooses values for the model input parameters, by which the kinematics of the CME over the entire Sun--"target" distance range is defined. The choice of model input parameters is usually based on several previously undertaken statistical studies. In other words, the model is used by ad hoc implementation of statistics-based values of the input parameters, which are not necessarily appropriate for the CME under study. Furthermore, such a procedure lacks quantitative information on how well the simulation reproduces the coronagraphically observed kinematics of the CME, and thus does not provide an estimate of the reliability of the arrival prediction. In this paper we advance the DBM by adopting it in a form that employs the CME observations over a given distance range to evaluate the most suitable model input parameters for a given CME by means of the least-squares fitting. Furthermore, the new version of the model automatically responds to any significant change of the conditions in the ambient medium (solar wind speed, density, CME--CME interactions, etc.) by changing the model input parameters according to changes in the CME kinematics. The advanced DBM is shaped in a form that can be readily employed in an operational system for real-time space-weather forecasting by promptly adjusting to a successively expanding observational dataset, thus providing a successively improving prediction of the CME arrival. △ Less

Submitted 29 June, 2015; originally announced June 2015.

Comments: 25 pages, 3 figures

Journal ref: ApJS 218 (2015) 32

Strong coronal channelling and interplanetary evolution of a solar storm up to Earth and Mars

Authors: Christian Möstl, Tanja Rollett, Rudy A. Frahm, Ying D. Liu, David M. Long, Robin C. Colaninno, Martin A. Reiss, Manuela Temmer, Charles J. Farrugia, Arik Posner, Mateja Dumbović, Miho Janvier, Pascal Démoulin, Peter Boakes, Andy Devos, Emil Kraaikamp, Mona L. Mays, Bojan Vrsnak

Abstract: The severe geomagnetic effects of solar storms or coronal mass ejections (CMEs) are to a large degree determined by their propagation direction with respect to Earth. There is a lack of understanding of the processes that determine their non-radial propagation. Here we present a synthesis of data from seven different space missions of a fast CME, which originated in an active region near the disk… ▽ More The severe geomagnetic effects of solar storms or coronal mass ejections (CMEs) are to a large degree determined by their propagation direction with respect to Earth. There is a lack of understanding of the processes that determine their non-radial propagation. Here we present a synthesis of data from seven different space missions of a fast CME, which originated in an active region near the disk centre and, hence, a significant geomagnetic impact was forecasted. However, the CME is demonstrated to be channelled during eruption into a direction + 37+/-10 degree (longitude) away from its source region, leading only to minimal geomagnetic effects. In situ observations near Earth and Mars confirm the channelled CME motion, and are consistent with an ellipse shape of the CME-driven shock provided by the new Ellipse Evolution model, presented here. The results enhance our understanding of CME propagation and shape, which can help to improve space weather forecasts. △ Less

Submitted 10 June, 2015; v1 submitted 9 June, 2015; originally announced June 2015.

Comments: 6 figures, published in Nature Communications as open access

Journal ref: Nature Communications, 6:7135, 2015

Real-time solar wind prediction based on SDO/AIA coronal hole data

Authors: T. Rotter, A. M. Veronig, M. Temmer, B. Vrsnak

Abstract: We present an empirical model based on the visible area covered by coronal holes close to the central meridian in order to predict the solar wind speed at 1 AU with a lead time up to four days in advance with a 1hr time resolution. Linear prediction functions are used to relate coronal hole areas to solar wind speed. The function parameters are automatically adapted by using the information from t… ▽ More We present an empirical model based on the visible area covered by coronal holes close to the central meridian in order to predict the solar wind speed at 1 AU with a lead time up to four days in advance with a 1hr time resolution. Linear prediction functions are used to relate coronal hole areas to solar wind speed. The function parameters are automatically adapted by using the information from the previous 3 Carrington Rotations. Thus the algorithm automatically reacts on the changes of the solar wind speed during different phases of the solar cycle. The adaptive algorithm has been applied to and tested on SDO/AIA-193A observations and ACE measurements during the years 2011-2013, covering 41 Carrington Rotations. The solar wind speed arrival time is delayed and needs on average 4.02 +/- 0.5 days to reach Earth. The algorithm produces good predictions for the 156 solar wind high speed streams peak amplitudes with correlation coefficients of cc~0.60. For 80% of the peaks, the predicted arrival matches within a time window of 0.5 days of the ACE in situ measurements. The same algorithm, using linear predictions, was also applied to predict the magnetic field strength from coronal hole areas but did not give reliable predictions (cc~0.2). △ Less

Submitted 27 January, 2015; originally announced January 2015.

Comments: under revision for Solar Physics

Geoeffectiveness of Coronal Mass Ejections in the SOHO era

Authors: Mateja Dumbovic, Andy Devos, Bojan Vrsnak, Davor Sudar, Luciano Rodriguez, Domagoj Ruzdjak, Kristoffer Leer, Susanne Vennerstrom, Astrid Veronig

Abstract: The main objective of the study is to determine the probability distributions of the geomagnetic Dst index as a function of the coronal mass ejection (CME) and solar flare parameters for the purpose of establishing a probabilistic forecast tool for the geomagnetic storm intensity. Several CME and flare parameters as well as the effect of successive-CME occurrence in changing the probability for a… ▽ More The main objective of the study is to determine the probability distributions of the geomagnetic Dst index as a function of the coronal mass ejection (CME) and solar flare parameters for the purpose of establishing a probabilistic forecast tool for the geomagnetic storm intensity. Several CME and flare parameters as well as the effect of successive-CME occurrence in changing the probability for a certain range of Dst index values, were examined. The results confirm some of already known relationships between remotely-observed properties of solar eruptive events and geomagnetic storms, namely the importance of initial CME speed, apparent width, source position, and the associated solar flare class. In this paper we quantify these relationships in a form to be used for space weather forecasting in future. The results of the statistical study are employed to construct an empirical statistical model for predicting the probability of the geomagnetic storm intensity based on remote solar observations of CMEs and flares. △ Less

Submitted 13 October, 2014; originally announced October 2014.

Statistical Analysis of Large-scale EUV Waves Observed by STEREO/EUVI

Authors: Nicole Muhr, Astrid Maria Veronig, Ines Waltraud Kienreich, Bojan Vrsnak, Manuela Temmer, Bianca Maria Bein

Abstract: We present a statistical analysis of 60 strong large-scale EUV wave events that occurred during January 2007 to February 2011 with the STEREO twin spacecraft regarding their kinematical evolution and wave pulse characteristics. For the start velocity, we obtain for the arithmetic mean $312\pm115$ km s$^{-1}$ (within a range of 100$-$630 km s$^{-1}$). For the mean (linear) velocity, the arithmetic… ▽ More We present a statistical analysis of 60 strong large-scale EUV wave events that occurred during January 2007 to February 2011 with the STEREO twin spacecraft regarding their kinematical evolution and wave pulse characteristics. For the start velocity, we obtain for the arithmetic mean $312\pm115$ km s$^{-1}$ (within a range of 100$-$630 km s$^{-1}$). For the mean (linear) velocity, the arithmetic mean is $254\pm76$ km s$^{-1}$ (within a range of 130$-$470 km s$^{-1}$). 52 % of all waves under study show a distinct deceleration during their propagation ($a\leq-50$ m s$^{-2}$), the other 48 % are consistent with a constant speed within the uncertainties ($-50\leq a\leq50$ m s$^{-2}$). The start velocity and the acceleration show a strong anticorrelation with $c\approx-0.8$, \textit i.e initially faster events undergo stronger deceleration than slower events. The (smooth) transition between constant propagation for slow events and deceleration in faster events occurs at an EUV wave start velocity of $v\approx230$ km s$^{-1}$, which corresponds well to the fast-mode speed in the quiet corona. These findings provide strong evidence that the EUV waves under study are indeed large-amplitude fast-mode MHD waves. This interpretation is further supported by the correlations obtained between the peak velocity and the peak amplitude, impulsiveness, and build-up time of the disturbance. We obtained the following association rates of EUV wave events to other solar phenomena: 95 % are associated with a coronal mass ejection (CME), 74 % to a solar flare, 15 % to interplanetary type II bursts, and 22 % to coronal type II bursts. These findings are consistent with the interpretation that the associated CMEs are the EUV waves' driving agent. △ Less

Submitted 11 August, 2014; originally announced August 2014.

Combined Multipoint Remote and In Situ Observations of the Asymmetric Evolution of a Fast Solar Coronal Mass Ejection

Authors: T. Rollett, C. Moestl, M. Temmer, R. A. Frahm, J. A. Davies, A. M. Veronig, B. Vrsnak, U. V. Amerstorfer, C. J. Farrugia, T. Zic, T. L. Zhang

Abstract: We present an analysis of the fast coronal mass ejection (CME) of 2012 March 7, which was imaged by both STEREO spacecraft and observed in situ by MESSENGER, Venus Express, Wind and Mars Express. Based on detected arrivals at four different positions in interplanetary space, it was possible to strongly constrain the kinematics and the shape of the ejection. Using the white-light heliospheric image… ▽ More We present an analysis of the fast coronal mass ejection (CME) of 2012 March 7, which was imaged by both STEREO spacecraft and observed in situ by MESSENGER, Venus Express, Wind and Mars Express. Based on detected arrivals at four different positions in interplanetary space, it was possible to strongly constrain the kinematics and the shape of the ejection. Using the white-light heliospheric imagery from STEREO-A and B, we derived two different kinematical profiles for the CME by applying the novel constrained self-similar expansion method. In addition, we used a drag-based model to investigate the influence of the ambient solar wind on the CME's propagation. We found that two preceding CMEs heading in different directions disturbed the overall shape of the CME and influenced its propagation behavior. While the Venus-directed segment underwent a gradual deceleration (from ~2700 km/s at 15 R_sun to ~1500 km/s at 154 R_sun), the Earth-directed part showed an abrupt retardation below 35 R_sun (from ~1700 to ~900 km/s). After that, it was propagating with a quasi-constant speed in the wake of a preceding event. Our results highlight the importance of studies concerning the unequal evolution of CMEs. Forecasting can only be improved if conditions in the solar wind are properly taken into account and if attention is also paid to large events preceding the one being studied. △ Less

Submitted 17 July, 2014; originally announced July 2014.

Journal ref: The Astrophysical Journal Letters, 790:L6 (7pp), 2014

Connecting speeds, directions and arrival times of 22 coronal mass ejections from the Sun to 1 AU

Authors: C. Möstl, K. Amla, J. R. Hall, P. C. Liewer, E. M. De Jong, R. C. Colaninno, A. M. Veronig, T. Rollett, M. Temmer, V. Peinhart, J. A. Davies, N. Lugaz, Y. D. Liu, C. J. Farrugia, J. G. Luhmann, B. Vršnak, R. A. Harrison, A. B. Galvin

Abstract: Forecasting the in situ properties of coronal mass ejections (CMEs) from remote images is expected to strongly enhance predictions of space weather, and is of general interest for studying the interaction of CMEs with planetary environments. We study the feasibility of using a single heliospheric imager (HI) instrument, imaging the solar wind density from the Sun to 1 AU, for connecting remote ima… ▽ More Forecasting the in situ properties of coronal mass ejections (CMEs) from remote images is expected to strongly enhance predictions of space weather, and is of general interest for studying the interaction of CMEs with planetary environments. We study the feasibility of using a single heliospheric imager (HI) instrument, imaging the solar wind density from the Sun to 1 AU, for connecting remote images to in situ observations of CMEs. We compare the predictions of speed and arrival time for 22 CMEs (in 2008-2012) to the corresponding interplanetary coronal mass ejection (ICME) parameters at in situ observatories (STEREO PLASTIC/IMPACT, Wind SWE/MFI). The list consists of front- and backsided, slow and fast CMEs (up to $2700 \: km \: s^{-1}$). We track the CMEs to $34.9 \pm 7.1$ degrees elongation from the Sun with J-maps constructed using the SATPLOT tool, resulting in prediction lead times of $-26.4 \pm 15.3$ hours. The geometrical models we use assume different CME front shapes (Fixed-$Φ$, Harmonic Mean, Self-Similar Expansion), and constant CME speed and direction. We find no significant superiority in the predictive capability of any of the three methods. The absolute difference between predicted and observed ICME arrival times is $8.1 \pm 6.3$ hours ($rms$ value of 10.9h). Speeds are consistent to within $284 \pm 288 \: km \: s^{-1}$. Empirical corrections to the predictions enhance their performance for the arrival times to $6.1 \pm 5.0$ hours ($rms$ value of 7.9h), and for the speeds to $53 \pm 50 \: km \: s^{-1}$. These results are important for Solar Orbiter and a space weather mission positioned away from the Sun-Earth line. △ Less

Submitted 14 April, 2014; originally announced April 2014.

Comments: 19 pages, 13 figures, accepted for publication in the Astrophysical Journal

Asymmetry in the CME-CME interaction process for the events from 2011 February 14-15

Authors: M. Temmer, A. M. Veronig, V. Peinhart, B. Vrsnak

Abstract: We present a detailed study of the interaction process of two coronal mass ejections (CMEs) successively launched on 2011 February 14 (CME1) and 2011 February 15 (CME2). Reconstructing the 3D shape and evolution of the flux ropes we verify that the two CMEs interact. The frontal structure of both CMEs measured along different position angles (PA) over the entire latitudinal extent, reveals differe… ▽ More We present a detailed study of the interaction process of two coronal mass ejections (CMEs) successively launched on 2011 February 14 (CME1) and 2011 February 15 (CME2). Reconstructing the 3D shape and evolution of the flux ropes we verify that the two CMEs interact. The frontal structure of both CMEs measured along different position angles (PA) over the entire latitudinal extent, reveals differences in the kinematics for the interacting flanks and the apexes. The interaction process is strongly PA-dependent in terms of timing as well as kinematical evolution. The central interaction occurs along PA-100°, which shows the strongest changes in kinematics. During interaction, CME1 accelerates from ~400 km/s to ~700 km/s and CME2 decelerates from ~1300 km/s to ~600 km/s. Our results indicate that a simplified scenario like inelastic collision may not be sufficient to describe the CME-CME interaction. Magnetic field structures of the intertwining flux ropes as well as momentum transfer due to shocks play an important role in the interaction process. △ Less

Submitted 27 February, 2014; originally announced February 2014.

Comments: ApJ (accepted); accompanying movie to Figure 4: http://www.uni-graz.at/~temmerma/richter/f4.mov

The chaotic solar cycle II. Analysis of cosmogenic 10Be data

Authors: A. Hanslmeier, R. Brajsa, J. Calogovic, B. Vrsnak, D. Ruzdjak, F. Steinhilber, C. L. MacLeod, Z. Ivezic, I. Skokic

Abstract: Context. The variations of solar activity over long time intervals using a solar activity reconstruction based on the cosmogenic radionuclide 10Be measured in polar ice cores are studied. Methods. By applying methods of nonlinear dynamics, the solar activity cycle is studied using solar activity proxies that have been reaching into the past for over 9300 years. The complexity of the system is expr… ▽ More Context. The variations of solar activity over long time intervals using a solar activity reconstruction based on the cosmogenic radionuclide 10Be measured in polar ice cores are studied. Methods. By applying methods of nonlinear dynamics, the solar activity cycle is studied using solar activity proxies that have been reaching into the past for over 9300 years. The complexity of the system is expressed by several parameters of nonlinear dynamics, such as embedding dimension or false nearest neighbors, and the method of delay coordinates is applied to the time series. We also fit a damped random walk model, which accurately describes the variability of quasars, to the solar 10Be data and investigate the corresponding power spectral distribution. The periods in the data series were searched by the Fourier and wavelet analyses. The solar activity on the long-term scale is found to be on the edge of chaotic behavior. This can explain the observed intermittent period of longer lasting solar activity minima. Filtering the data by eliminating variations below a certain period (the periods of 380 yr and 57 yr were used) yields a far more regular behavior of solar activity. A comparison between the results for the 10Be data with the 14C data shows many similarities. Both cosmogenic isotopes are strongly correlated mutually and with solar activity. Finally, we find that a series of damped random walk models provides a good fit to the 10Be data with a fixed characteristic time scale of 1000 years, which is roughly consistent with the quasi-periods found by the Fourier and wavelet analyses. △ Less

Submitted 12 February, 2014; originally announced February 2014.

Comments: 8 pages, 11 figures

Initiation of Coronal Mass Ejections by Sunspot Rotation

Authors: Tibor Török, Manuela Temmer, Gherardo Valori, Astrid Veronig, Lidia van Driel-Gesztelyi, Bojan Vršnak

Abstract: We study a filament eruption, two-ribbon flare, and coronal mass ejection (CME) that occurred in Active Region NOAA 10898 on 6 July 2006. The filament was located South of a strong sunspot that dominated the region. In the evolution leading up to the eruption, and for some time after it, a counter-clockwise rotation of the sunspot of about 30 degrees was observed. We suggest that the rotation trig… ▽ More We study a filament eruption, two-ribbon flare, and coronal mass ejection (CME) that occurred in Active Region NOAA 10898 on 6 July 2006. The filament was located South of a strong sunspot that dominated the region. In the evolution leading up to the eruption, and for some time after it, a counter-clockwise rotation of the sunspot of about 30 degrees was observed. We suggest that the rotation triggered the eruption by progressively expanding the magnetic field above the filament. To test this scenario, we study the effect of twisting the initially potential field overlying a pre-existing flux-rope, using three-dimensional zero-$β$ MHD simulations. We first consider a relatively simple and symmetric system, and then study a more complex and asymmetric magnetic configuration, whose photospheric flux distribution and coronal structure are guided by the observations and a potential field extrapolation. In both cases, we find that the twisting leads to the expansion of the overlying field. As a consequence of the progressively reduced magnetic tension, the flux-rope quasi-statically adapts to the changed environmental field, rising slowly. Once the tension is sufficiently reduced, a distinct second phase of evolution occurs where the flux-rope enters an unstable regime characterized by a strong acceleration. Our simulations thus suggest a new mechanism for the triggering of eruptions in the vicinity of rotating sunspots. △ Less

Submitted 13 January, 2014; originally announced January 2014.

Comments: 28 pages, 10 figures

Journal ref: Solar Physics, Volume 286, Issue 2, pp.453-477 (2013)

Investigation on the Coronal Magnetic Field Using a Type II Solar Radio Burst

Authors: V. Vasanth, S. Umapathy, B. Vršnak, T. Žic, O. Prakash

Abstract: The Type-II solar radio burst recorded on 13 June 2010 by the radio spectrograph of the Hiraiso Solar Observatory was employed to estimate the magnetic-field strength in the solar corona. The burst was characterized by a well pronounced band-splitting, which we used to estimate the density jump at the shock and Alfven Mach number using the Rankine-Hugoniot relations. The plasma frequency of the Ty… ▽ More The Type-II solar radio burst recorded on 13 June 2010 by the radio spectrograph of the Hiraiso Solar Observatory was employed to estimate the magnetic-field strength in the solar corona. The burst was characterized by a well pronounced band-splitting, which we used to estimate the density jump at the shock and Alfven Mach number using the Rankine-Hugoniot relations. The plasma frequency of the Type-II bursts is converted into height [R] in solar radii using the appropriate density model, then we estimated the shock speed [Vs], coronal Alfven velocity [Va], and the magnetic-field strength at different heights. The relative bandwidth of the band-split is found to be in the range 0.2 -- 0.25, corresponding to the density jump of X = 1.44 -- 1.56, and the Alfven Mach number of MA = 1.35 -- 1.45. The inferred mean shock speed was on the order of V ~ 667 km/s. From the dependencies V(R) and MA(R) we found that Alfven speed slightly decreases at R ~ 1.3 -- 1.5. The magnetic-field strength decreases from a value between 2.7 and 1.7 G at R ~ 1.3 -- 1.5 Rs depending on the coronal-density model employed. We find that our results are in good agreement with the empirical scaling by Dulk and McLean (Solar Phys. 57, 279, 1978) and Gopalswamy et al. (Astrophys. J. 744, 72, 2012). Our result shows that Type-II band splitting method is an important tool for inferring the coronal magnetic field, especially when independent measurements were made from white light observations. △ Less

Submitted 8 May, 2013; originally announced May 2013.

Comments: Accepted for publication in Solar Physics

Formation of Coronal Shock Waves

Authors: S. Lulić, B. Vršnak, T. Žic, I. W. Kienreich, N. Muhr, M. Temmer, A. M. Veronig

Abstract: Numerical simulations of magnetosonic wave formation driven by an expanding cylindrical piston are performed to get better physical insight into the initiation and evolution of large-scale coronal waves. Several very basic initial configurations are employed to analyze intrinsic characteristics of the MHD wave formation that do not depend on specific properties of the environment. It turns out tha… ▽ More Numerical simulations of magnetosonic wave formation driven by an expanding cylindrical piston are performed to get better physical insight into the initiation and evolution of large-scale coronal waves. Several very basic initial configurations are employed to analyze intrinsic characteristics of the MHD wave formation that do not depend on specific properties of the environment. It turns out that these simple initial configurations result in piston/wave morphologies and kinematics that reproduce common characteristics of coronal waves. In the initial stage the wave and the expanding source-region cannot be clearly resolved. During the acceleration stage of the source-region inflation, the wave is driven by the piston expansion, so its amplitude and phase-speed increase, whereas the wavefront profile steepens. At a given point, a discontinuity forms in the wavefront profile. The time/distance required for the shock formation is shorter for a more impulsive source-region expansion. After the piston stops, the wave amplitude and phase-speed start decreasing. During the expansion, most of the source region becomes strongly rarified, which reproduces the coronal dimming left behind the eruption. On the other hand, the density increases at the source-region boundary, and stays enhanced even after the expansion stops, which might explain stationary brightenings that are sometimes observed at the edges of the erupted coronal structure. In addition, in the rear of the wave a weak density depletion develops, trailing the wave, which is sometimes observed as weak transient coronal dimming. Finally, we find a well defined relationship between the impulsiveness of the source-region expansion and the wave amplitude and phase speed. The results for the cylindrical piston are also compared with the outcome for a planar wave, to find out how different geometries affect the evolution of the wave. △ Less

Submitted 12 March, 2013; originally announced March 2013.

Comments: Submitted to Solar Physics journal

The Wave-Driver System of the Off-Disk Coronal Wave 17 January 2010

Authors: M. Temmer, B. Vrsnak, A. M. Veronig

Abstract: We study the 17 January 2010 flare-CME-wave event by using STEREO/SECCHI EUVI and COR1 data. The observational study is combined with an analytic model which simulates the evolution of the coronal-wave phenomenon associated with the event. From EUV observations, the wave signature appears to be dome shaped having a component propagating on the solar surface (v~280 km s-1) as well as off-disk (v~60… ▽ More We study the 17 January 2010 flare-CME-wave event by using STEREO/SECCHI EUVI and COR1 data. The observational study is combined with an analytic model which simulates the evolution of the coronal-wave phenomenon associated with the event. From EUV observations, the wave signature appears to be dome shaped having a component propagating on the solar surface (v~280 km s-1) as well as off-disk (v~600 km s-1) away from the Sun. The off-disk dome of the wave consists of two enhancements in intensity, which conjointly develop and can be followed up to white-light coronagraph images. Applying an analytic model, we derive that these intensity variations belong to a wave-driver system with a weakly shocked wave, initially driven by expanding loops, which are indicative of the early evolution phase of the accompanying CME. We obtain the shock standoff distance between wave and driver from observations as well as from model results. The shock standoff distance close to the Sun (<0.3 Rs above the solar surface) is found to rapidly increase with values of ~0.03-0.09 Rs which give evidence of an initial lateral (over-)expansion of the CME. The kinematical evolution of the on-disk wave could be modeled using input parameters which require a more impulsive driver (t=90 s, a=1.7 km s-2) compared to the off-disk component (t=340 s, a=1.5 km s-2). △ Less

Submitted 12 July, 2012; originally announced July 2012.

Comments: accepted for publication in Solar Physics

Impulsive acceleration of coronal mass ejections: II. Relation to SXR flares and filament eruptions

Authors: B. M. Bein, S. Berkebile-Stoiser, A. M. Veronig, M. Temmer, B. Vrsnak

Abstract: Using high time cadence images from the STEREO EUVI, COR1 and COR2 instruments, we derived detailed kinematics of the main acceleration stage for a sample of 95 CMEs in comparison with associated flares and filament eruptions. We found that CMEs associated with flares reveal on average significantly higher peak accelerations and lower acceleration phase durations, initiation heights and heights, a… ▽ More Using high time cadence images from the STEREO EUVI, COR1 and COR2 instruments, we derived detailed kinematics of the main acceleration stage for a sample of 95 CMEs in comparison with associated flares and filament eruptions. We found that CMEs associated with flares reveal on average significantly higher peak accelerations and lower acceleration phase durations, initiation heights and heights, at which they reach their peak velocities and peak accelerations. This means that CMEs that are associated with flares are characterized by higher and more impulsive accelerations and originate from lower in the corona where the magnetic field is stronger. For CMEs that are associated with filament eruptions we found only for the CME peak acceleration significantly lower values than for events which were not associated with filament eruptions. The flare rise time was found to be positively correlated with the CME acceleration duration, and negatively correlated with the CME peak acceleration. For the majority of the events the CME acceleration starts before the flare onset (for 75% of the events) and the CME accleration ends after the SXR peak time (for 77% of the events). In ~60% of the events, the time difference between the peak time of the flare SXR flux derivative and the peak time of the CME acceleration is smaller than \pm5 min, which hints at a feedback relationship between the CME acceleration and the energy release in the associated flare due to magnetic reconnection. △ Less

Submitted 11 June, 2012; originally announced June 2012.

STEREO-A and PROBA2 Quadrature Observations of Reflections of three EUV Waves from a Coronal Hole

Authors: Ines Waltraud Kienreich, Nicole Muhr, Astrid Veronig, David Berghmans, Anik de Groof, Manuela Temmer, Bojan Vršnak, Dan Seaton

Abstract: We investigate the interaction of three consecutive large-scale coronal waves with a polar coronal hole, simultaneously observed on-disk by the Solar TErrestrial Relations Observatory (STEREO)-A spacecraft and on the limb by the PRoject for On-Board Autonomy 2 (PROBA2) spacecraft on January 27, 2011. All three extreme-ultraviolet(EUV) waves originate from the same active region NOAA 11149 position… ▽ More We investigate the interaction of three consecutive large-scale coronal waves with a polar coronal hole, simultaneously observed on-disk by the Solar TErrestrial Relations Observatory (STEREO)-A spacecraft and on the limb by the PRoject for On-Board Autonomy 2 (PROBA2) spacecraft on January 27, 2011. All three extreme-ultraviolet(EUV) waves originate from the same active region NOAA 11149 positioned at N30E15 in the STEREO-A field-of-view and on the limb in PROBA2. We derive for the three primary EUV waves start velocities in the range of ~310 km/s for the weakest up to ~500 km/s for the strongest event. Each large-scale wave is reflected at the border of the extended coronal hole at the southern polar region. The average velocities of the reflected waves are found to be smaller than the mean velocities of their associated direct waves. However, the kinematical study also reveals that in each case the end velocity of the primary wave matches the initial velocity of the reflected wave. In all three events the primary and reflected waves obey the Huygens-Fresnel principle, as the incident angle with ~10° to the normal is of the same size as the angle of reflection. The correlation between the speed and the strength of the primary EUV waves, the homologous appearance of both the primary and the reflected waves, and in particular the EUV wave reflections themselves implicate that the observed EUV transients are indeed nonlinear large-amplitude MHD waves. △ Less

Submitted 29 April, 2012; originally announced April 2012.

Comments: 22 pages, 8 figures, accepted for publication in Solar Physics

Characteristics of kinematics of a coronal mass ejection during the 2010 August 1 CME-CME interaction event

Authors: Manuela Temmer, Bojan Vrsnak, Tanja Rollett, Bianca Bein, Curt A. de Koning, Ying Liu, Eckhard Bosman, Jackie A. Davies, Christian Möstl, Tomislav Zic, Astrid M. Veronig, Volker Bothmer, Richard Harrison, Nariaki Nitta, Mario Bisi, Olga Flor, Jonathan Eastwood, Dusan Odstrcil, Robert Forsyth

Abstract: We study the interaction of two successive coronal mass ejections (CMEs) during the 2010 August 1 events using STEREO/SECCHI COR and HI data. We obtain the direction of motion for both CMEs by applying several independent reconstruction methods and find that the CMEs head in similar directions. This provides evidence that a full interaction takes place between the two CMEs that can be observed in… ▽ More We study the interaction of two successive coronal mass ejections (CMEs) during the 2010 August 1 events using STEREO/SECCHI COR and HI data. We obtain the direction of motion for both CMEs by applying several independent reconstruction methods and find that the CMEs head in similar directions. This provides evidence that a full interaction takes place between the two CMEs that can be observed in the HI1 field-of-view. The full de-projected kinematics of the faster CME from Sun to Earth is derived by combining remote observations with in situ measurements of the CME at 1 AU. The speed profile of the faster CME (CME2; ~1200 km/s) shows a strong deceleration over the distance range at which it reaches the slower, preceding CME (CME1; ~700 km/s). By applying a drag-based model we are able to reproduce the kinematical profile of CME2 suggesting that CME1 represents a magnetohydrodynamic obstacle for CME2 and that, after the interaction, the merged entity propagates as a single structure in an ambient flow of speed and density typical for quiet solar wind conditions. Observational facts show that magnetic forces may contribute to the enhanced deceleration of CME2. We speculate that the increase in magnetic tension and pressure, when CME2 bends and compresses the magnetic field lines of CME1, increases the efficiency of drag. △ Less

Submitted 3 February, 2012; originally announced February 2012.

Comments: accepted for ApJ

Plasma diagnostics of an EIT wave observed by Hinode/EIS and SDO/AIA

Authors: A. M. Veronig, P. Gomory, I. W. Kienreich, N. Muhr, B. Vrsnak, M. Temmer, H. P. Warren

Abstract: We present plasma diagnostics of an EIT wave observed with high cadence in Hinode/EIS sit-and-stare spectroscopy and SDO/AIA imagery obtained during the HOP-180 observing campaign on 2011 February 16. At the propagating EIT wave front, we observe downward plasma flows in the EIS Fe XII, Fe XIII, and Fe XVI spectral lines (log T ~ 6.1-6.4) with line-of-sight (LOS) velocities up to 20 km/s. These re… ▽ More We present plasma diagnostics of an EIT wave observed with high cadence in Hinode/EIS sit-and-stare spectroscopy and SDO/AIA imagery obtained during the HOP-180 observing campaign on 2011 February 16. At the propagating EIT wave front, we observe downward plasma flows in the EIS Fe XII, Fe XIII, and Fe XVI spectral lines (log T ~ 6.1-6.4) with line-of-sight (LOS) velocities up to 20 km/s. These red-shifts are followed by blue-shifts with upward velocities up to -5 km/s indicating relaxation of the plasma behind the wave front. During the wave evolution, the downward velocity pulse steepens from a few km/s up to 20 km/s and subsequently decays, correlated with the relative changes of the line intensities. The expected increase of the plasma densities at the EIT wave front estimated from the observed intensity increase lies within the noise level of our density diagnostics from EIS XIII 202/203 AA line ratios. No significant LOS plasma motions are observed in the He II line, suggesting that the wave pulse was not strong enough to perturb the underlying chromosphere. This is consistent with the finding that no Halpha Moreton wave was associated with the event. The EIT wave propagating along the EIS slit reveals a strong deceleration of a ~ -540 m/s2 and a start velocity of v0 ~ 590 km/s. These findings are consistent with the passage of a coronal fast-mode MHD wave, pushing the plasma downward and compressing it at the coronal base. △ Less

Submitted 15 November, 2011; originally announced November 2011.

Comments: Accepted for ApJ Letters

Influence of the ambient solar wind flow on the propagation behavior of interplanetary CMEs

Authors: Manuela Temmer, Tanja Rollett, Christian Möstl, Astrid M. Veronig, Bojan Vrsnak, Dusan Odstrcil

Abstract: We study three CME/ICME events (2008 June 1-6, 2009 February 13-18, 2010 April 3-5) tracked from Sun to 1 AU in remote-sensing observations of STEREO Heliospheric Imagers and in situ plasma and magnetic field measurements. We focus on the ICME propagation in IP space that is governed by two forces, the propelling Lorentz force and the drag force. We address the question at which heliospheric dista… ▽ More We study three CME/ICME events (2008 June 1-6, 2009 February 13-18, 2010 April 3-5) tracked from Sun to 1 AU in remote-sensing observations of STEREO Heliospheric Imagers and in situ plasma and magnetic field measurements. We focus on the ICME propagation in IP space that is governed by two forces, the propelling Lorentz force and the drag force. We address the question at which heliospheric distance range the drag becomes dominant and the CME gets adjusted to the solar wind flow. To this aim we analyze speed differences between ICMEs and the ambient solar wind flow as function of distance. The evolution of the ambient solar wind flow is derived from ENLIL 3D MHD model runs using different solar wind models, namely Wang-Sheeley-Arge (WSA) and MHD-Around-A-Sphere (MAS). Comparing the measured CME kinematics with the solar wind models we find that the CME speed gets adjusted to the solar wind speed at very different heliospheric distances in the three events under study: from below 30 Rs, to beyond 1 AU, depending on the CME and ambient solar wind characteristics. ENLIL can be used to derive important information about the overall structure of the background solar wind, providing more reliable results during times of low solar activity than during times of high solar activity. The results from this study enable us to get a better insight into the forces acting on CMEs over the IP space distance range, which is an important prerequisite in order to predict their 1 AU transit times. △ Less

Submitted 4 October, 2011; originally announced October 2011.

Comments: accepted for publication in ApJ