Showing 1–50 of 72 results for author: Vissers, M

Instrument Overview of Taurus: A Balloon-borne CMB and Dust Polarization Experiment

Authors: Jared L. May, Alexandre E. Adler, Jason E. Austermann, Steven J. Benton, Rick Bihary, Malcolm Durkin, Shannon M. Duff, Jeffrey P. Filippini, Aurelien A. Fraisse, Thomas J. L. J. Gascard, Sho M. Gibbs, Suren Gourapura, Jon E. Gudmundsson, John W. Hartley, Johannes Hubmayr, William C. Jones, Steven Li, Johanna M. Nagy, Kate Okun, Ivan L. Padilla, L. Javier Romualdez, Simon Tartakovsky, Michael R. Vissers

Abstract: Taurus is a balloon-borne cosmic microwave background (CMB) experiment optimized to map the E-mode polarization and Galactic foregrounds at the largest angular scales ($\ell$ $\lt$ 30) and improve measurements of the optical depth to reionization ($τ$). This will pave the way for improved measurements of the sum of neutrino masses in combination with high-resolution CMB data while also testing the… ▽ More Taurus is a balloon-borne cosmic microwave background (CMB) experiment optimized to map the E-mode polarization and Galactic foregrounds at the largest angular scales ($\ell$ $\lt$ 30) and improve measurements of the optical depth to reionization ($τ$). This will pave the way for improved measurements of the sum of neutrino masses in combination with high-resolution CMB data while also testing the $ΛCDM$ model on large angular scales and providing high-frequency maps of polarized dust foregrounds to the CMB community. These measurements take advantage of the low-loading environment found in the stratosphere and are enabled by NASA's super-pressure balloon platform, which provides access to 70% of the sky with a launch from Wanaka, New Zealand. Here we describe a general overview of Taurus, with an emphasis on the instrument design. Taurus will employ more than 10,000 100 mK transition edge sensor bolometers distributed across two low-frequency (150, 220 GHz) and one high-frequency (280, 350 GHz) dichroic receivers. The liquid helium cryostat housing the detectors and optics is supported by a lightweight gondola. The payload is designed to meet the challenges in mass, power, and thermal control posed by the super-pressure platform. The instrument and scan strategy are optimized for rigorous control of instrumental systematics, enabling high-fidelity linear polarization measurements on the largest angular scales. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Modeling optical systematics for the Taurus CMB experiment

Authors: Alexandre E. Adler, Jason E. Austermann, Steven J. Benton, Shannon M. Duff, Jeffrey P. Filippini, Aurelien A. Fraisse, Thomas Gascard, Sho M. Gibbs, Suren Gourapura, Johannes Hubmayr, Jon E. Gudmundsson, William C. Jones, Jared L. May, Johanna M. Nagy, Kate Okun, Ivan Padilla, Christopher Rooney, Simon Tartakovsky, Michael R. Vissers

Abstract: We simulate a variety of optical systematics for Taurus, a balloon-borne cosmic microwave background (CMB) polarisation experiment, to assess their impact on large-scale E-mode polarisation measurements and constraints of the optical depth to reionisation τ. We model a one-month flight of Taurus from Wanaka, New Zealand aboard a super-pressure balloon (SPB). We simulate night-time scans of both th… ▽ More We simulate a variety of optical systematics for Taurus, a balloon-borne cosmic microwave background (CMB) polarisation experiment, to assess their impact on large-scale E-mode polarisation measurements and constraints of the optical depth to reionisation τ. We model a one-month flight of Taurus from Wanaka, New Zealand aboard a super-pressure balloon (SPB). We simulate night-time scans of both the CMB and dust foregrounds in the 150GHz band, one of Taurus's four observing bands. We consider a variety of possible systematics that may affect Taurus's observations, including non-gaussian beams, pointing reconstruction error, and half-wave plate (HWP) non-idealities. For each of these, we evaluate the residual power in the difference between maps simulated with and without the systematic, and compare this to the expected signal level corresponding to Taurus's science goals. Our results indicate that most of the HWP-related systematics can be mitigated to be smaller than sample variance by calibrating with Planck's TT spectrum and using an achromatic HWP model, with a preference for five layers of sapphire to ensure good systematic control. However, additional beam characterization will be required to mitigate far-sidelobe pickup from dust on larger scales. △ Less

Submitted 17 June, 2024; originally announced June 2024.

Comments: 21 pages, 6 tables, 7 figures, to be submitted to JCAP

CCAT: Comparisons of 280 GHz TiN and Al Kinetic Inductance Detector Arrays

Authors: Cody J. Duell, Jason Austermann, James Beall, James R. Burgoyne, Scott C. Chapman, Steve K. Choi, Rodrigo G. Freundt, Jiansong Gao, Christopher Groppi, Anthony I. Huber, Zachary B. Huber, Johannes Hubmayr, Ben Keller, Yaqiong Li, Lawrence T. Lin, Justin Matthewson, Philip Mauskopf, Alicia Middleton, Colin C. Murphy, Michael D. Niemack, Thomas Nikola, Adrian K. Sinclair, Ema Smith, Jeff van Lanen, Anna Vaskuri , et al. (5 additional authors not shown)

Abstract: The CCAT Collaboration's six-meter Fred Young Submillimeter Telescope is scheduled to begin observing in the Chilean Atacama in 2025, targeting a variety of science goals throughout cosmic history. Prime-Cam is a 1.8-meter diameter cryostat that will host up to seven independent instrument modules designed for simultaneous spectroscopic and broadband, polarimetric surveys at millimeter to submilli… ▽ More The CCAT Collaboration's six-meter Fred Young Submillimeter Telescope is scheduled to begin observing in the Chilean Atacama in 2025, targeting a variety of science goals throughout cosmic history. Prime-Cam is a 1.8-meter diameter cryostat that will host up to seven independent instrument modules designed for simultaneous spectroscopic and broadband, polarimetric surveys at millimeter to submillimeter wavelengths. The first of these instrument modules, the 280 GHz module, will include ${\sim}$10,000 kinetic inductance detectors (KIDs) across three arrays. While the first array was fabricated out of tri-layer TiN/Ti/TiN, the other two arrays were fabricated out of a single layer of Al. This combination of materials within the same instrument provides a unique opportunity to directly compare the performance and noise properties of two different detector materials that are seeing increasing use within the field. We present preliminary comparisons here based on lab testing, along with a discussion of the potential impacts on operation when observing and translating raw data to science-grade maps. △ Less

Submitted 10 June, 2024; originally announced June 2024.

Comments: 6 pages, 3 figures, conference proceedings submitted to the Journal of Low Temperature Physics

Simons Observatory: Pre-deployment Performance of a Large Aperture Telescope Optics Tube in the 90 and 150 GHz Spectral Bands

Authors: Carlos E. Sierra, Kathleen Harrington, Shreya Sutariya, Thomas Alford, Anna M. Kofman, Grace E. Chesmore, Jason E. Austermann, Andrew Bazarko, James A. Beall, Tanay Bhandarkar, Mark J. Devlin, Simon R. Dicker, Peter N. Dow, Shannon M. Duff, Daniel Dutcher, Nicholas Galitzki, Joseph E. Golec, John C. Groh, Jon E. Gudmundsson, Saianeesh K. Haridas, Erin Healy, Johannes Hubmayr, Jeffrey Iuliano, Bradley R. Johnson, Claire S. Lessler , et al. (20 additional authors not shown)

Abstract: The Simons Observatory will map the temperature and polarization over half of the sky, at millimeter wavelengths in six spectral bands from the Atacama Desert in Chile. These data will provide new insights into the genesis, content, and history of our Universe; the astrophysics of galaxies and galaxy clusters; objects in our solar system; and time-varying astrophysical phenomena. This ambitious ne… ▽ More The Simons Observatory will map the temperature and polarization over half of the sky, at millimeter wavelengths in six spectral bands from the Atacama Desert in Chile. These data will provide new insights into the genesis, content, and history of our Universe; the astrophysics of galaxies and galaxy clusters; objects in our solar system; and time-varying astrophysical phenomena. This ambitious new instrument suite, initially comprising three 0.5 m small-aperture telescopes and one 6 m large aperture telescope, is designed using a common combination of new technologies and new implementations to realize an observatory significantly more capable than the previous generation. In this paper, we present the pre-deployment performance of the first mid-frequency "optics tube" which will be fielded on the large aperture telescope with sensitivity to the 90 and 150 GHz spectral bands. This optics tube contains lenses, filters, detectors, and readout components, all of which operate at cryogenic temperatures. It is one of seven that form the core of the large aperture telescope receiver in its initial deployment. We describe this optics tube, including details of comprehensive testing methods, new techniques for beam and passband characterization, and its measured performance. The performance metrics include beams, optical efficiency, passbands, and forecasts for the on-sky performance of the system. We forecast a sensitivity that exceeds the requirements of the large aperture telescope with greater than 30% margin in each spectral band, and predict that the instrument will realize diffraction-limited performance and the expected detector passbands. △ Less

Submitted 10 May, 2024; originally announced May 2024.

The Simons Observatory: Design, integration, and testing of the small aperture telescopes

Authors: Nicholas Galitzki, Tran Tsan, Jake Spisak, Michael Randall, Max Silva-Feaver, Joseph Seibert, Jacob Lashner, Shunsuke Adachi, Sean M. Adkins, Thomas Alford, Kam Arnold, Peter C. Ashton, Jason E. Austermann, Carlo Baccigalupi, Andrew Bazarko, James A. Beall, Sanah Bhimani, Bryce Bixler, Gabriele Coppi, Lance Corbett, Kevin D. Crowley, Kevin T. Crowley, Samuel Day-Weiss, Simon Dicker, Peter N. Dow , et al. (55 additional authors not shown)

Abstract: The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5,200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of $σ(r)=0.002$, with quantified systematic errors well below this value. Each SAT… ▽ More The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5,200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of $σ(r)=0.002$, with quantified systematic errors well below this value. Each SAT is a self-contained cryogenic telescope with a 35$^\circ$ field of view, 42 cm diameter optical aperture, 40 K half-wave plate, 1 K refractive optics, and $<0.1$ K focal plane that holds $>12,000$ TES detectors. We describe the nominal design of the SATs and present details about the integration and testing for one operating at 93 and 145 GHz. △ Less

Submitted 10 May, 2024; v1 submitted 9 May, 2024; originally announced May 2024.

The BLAST Observatory: A Sensitivity Study for Far-IR Balloon-borne Polarimeters

Authors: The BLAST Observatory Collaboration, Gabriele Coppi, Simon Dicker, James E. Aguirre, Jason E. Austermann, James A. Beall, Susan E. Clark, Erin G. Cox, Mark J. Devlin, Laura M. Fissel, Nicholas Galitzki, Brandon S. Hensley, Johannes Hubmayr, Sergio Molinari, Federico Nati, Giles Novak, Eugenio Schisano, Juan D. Soler, Carole E. Tucker, Joel N. Ullom, Anna Vaskuri, Michael R. Vissers, Jordan D. Wheeler, Mario Zannoni

Abstract: Sensitive wide-field observations of polarized thermal emission from interstellar dust grains will allow astronomers to address key outstanding questions about the life cycle of matter and energy driving the formation of stars and the evolution of galaxies. Stratospheric balloon-borne telescopes can map this polarized emission at far-infrared wavelengths near the peak of the dust thermal spectrum… ▽ More Sensitive wide-field observations of polarized thermal emission from interstellar dust grains will allow astronomers to address key outstanding questions about the life cycle of matter and energy driving the formation of stars and the evolution of galaxies. Stratospheric balloon-borne telescopes can map this polarized emission at far-infrared wavelengths near the peak of the dust thermal spectrum - wavelengths that are inaccessible from the ground. In this paper we address the sensitivity achievable by a Super Pressure Balloon (SPB) polarimetry mission, using as an example the Balloon-borne Large Aperture Submillimeter Telescope (BLAST) Observatory. By launching from Wanaka, New Zealand, BLAST Observatory can obtain a 30-day flight with excellent sky coverage - overcoming limitations of past experiments that suffered from short flight duration and/or launch sites with poor coverage of nearby star-forming regions. This proposed polarimetry mission will map large regions of the sky at sub-arcminute resolution, with simultaneous observations at 175, 250, and 350 $μm$, using a total of 8274 microwave kinetic inductance detectors. Here, we describe the scientific motivation for the BLAST Observatory, the proposed implementation, and the forecasting methods used to predict its sensitivity. We also compare our forecasted experiment sensitivity with other facilities. △ Less

Submitted 23 May, 2024; v1 submitted 25 January, 2024; originally announced January 2024.

Comments: Published in PASP

Journal ref: 2024 PASP 136 035003

End-to-End Modeling of the TDM Readout System for CMB-S4

Authors: David C. Goldfinger, Zeeshan Ahmed, Darcy R. Barron, W. Bertrand Doriese, Malcolm Durkin, Jeffrey P. Filippini, Gunther Haller, Shawn W. Henderson, Ryan Herbst, Johannes Hubmayr, Kent Irwin, Ben Reese, Leonid Sapozhnikov, Keith L. Thompson, Joel Ullom, Michael R. Vissers

Abstract: The CMB-S4 experiment is develo** next-generation ground-based microwave telescopes to observe the Cosmic Microwave Background with unprecedented sensitivity. This will require an order of magnitude increase in the 100 mK detector count, which in turn increases the demands on the readout system. The CMB-S4 readout will use time division multiplexing (TDM), taking advantage of faster switches and… ▽ More The CMB-S4 experiment is develo** next-generation ground-based microwave telescopes to observe the Cosmic Microwave Background with unprecedented sensitivity. This will require an order of magnitude increase in the 100 mK detector count, which in turn increases the demands on the readout system. The CMB-S4 readout will use time division multiplexing (TDM), taking advantage of faster switches and amplifiers in order to achieve an increased multiplexing factor. To facilitate the design of the new readout system, we have developed a model that predicts the bandwidth and noise performance of this circuity and its interconnections. This is then used to set requirements on individual components in order to meet the performance necessary for the full system. We present an overview of this model and compare the model results to the performance of both legacy and prototype readout hardware. △ Less

Submitted 17 November, 2023; v1 submitted 7 November, 2023; originally announced November 2023.

Comments: This manuscript was submitted to the Journal of Low Temperature Physics as part of the special issue "LTD20", supporting the conference contribution RP-005

Improved microwave SQUID multiplexer readout using a kinetic-inductance traveling-wave parametric amplifier

Authors: M. Malnou, J. A. B. Mates, M. R. Vissers, L. R. Vale, D. R. Schmidt, D. A. Bennett, J. Gao, J. N. Ullom

Abstract: We report on the use of a kinetic-inductance traveling-wave parametric amplifier (KITWPA) as the first amplifier in the readout chain of a microwave superconducting quantum interference device (SQUID) multiplexer (umux). This umux is designed to multiplex signals from arrays of low temperature detectors such as superconducting transition-edge sensor microcalorimeters. When modulated with a periodi… ▽ More We report on the use of a kinetic-inductance traveling-wave parametric amplifier (KITWPA) as the first amplifier in the readout chain of a microwave superconducting quantum interference device (SQUID) multiplexer (umux). This umux is designed to multiplex signals from arrays of low temperature detectors such as superconducting transition-edge sensor microcalorimeters. When modulated with a periodic flux-ramp to linearize the SQUID response, the flux noise improves, on average, from $1.6$ $μΦ_0/\sqrt{\mathrm{Hz}}$ with the KITWPA off, to $0.77$ $μΦ_0/\sqrt{\mathrm{Hz}}$ with the KITWPA on. When statically biasing the umux to the maximally flux-sensitive point, the flux noise drops from $0.45$ $μΦ_0/\sqrt{\mathrm{Hz}}$ to $0.2$ $μΦ_0/\sqrt{\mathrm{Hz}}$. We validate this new readout scheme by coupling a transition-edge sensor microcalorimeter to the umux and detecting background radiation. The combination of umux and KITWPA provides a variety of new capabilities including improved detector sensitivity and more efficient bandwidth utilization. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Development of the Low Frequency Telescope Focal Plane Detector Modules for LiteBIRD

Authors: Benjamin Westbrook, Christopher Raum, Shawn Beckman, Adrian T. Lee, Nicole Farias, Andrew Bogdan, Amber Hornsby, Aritoki Suzuki, Kaja Rotermund, Tucker Elleflot, Jason E. Austermann, James A. Beall, Shannon M. Duff, Johannes Hubmayr, Michael R. Vissers, Michael J. Link, Greg Jaehnig, Nils Halverson, Tomasso Ghigna, Masashi Hazumi, Samantha Stever, Yuto Minami, Keith L. Thompson, Megan Russell, Kam Arnold , et al. (1 additional authors not shown)

Abstract: LiteBIRD is a JAXA-led strategic large-class satellite mission designed to measure the polarization of the cosmic microwave background and Galactic foregrounds from 34 to 448 GHz across the entire sky from L2 in the late 2020s. The scientific payload includes three telescopes which are called the low-, mid-, and high-frequency telescopes each with their own receiver that covers a portion of the mi… ▽ More LiteBIRD is a JAXA-led strategic large-class satellite mission designed to measure the polarization of the cosmic microwave background and Galactic foregrounds from 34 to 448 GHz across the entire sky from L2 in the late 2020s. The scientific payload includes three telescopes which are called the low-, mid-, and high-frequency telescopes each with their own receiver that covers a portion of the mission's frequency range. The low frequency telescope will map synchrotron radiation from the Galactic foreground and the cosmic microwave background. We discuss the design, fabrication, and characterization of the low-frequency focal plane modules for low-frequency telescope, which has a total bandwidth ranging from 34 to 161 GHz. There will be a total of 4 different pixel types with 8 overlap** bands to cover the full frequency range. These modules are housed in a single low-frequency focal plane unit which provides thermal isolation, mechanical support, and radiative baffling for the detectors. The module design implements multi-chroic lenslet-coupled sinuous antenna arrays coupled to transition edge sensor bolometers read out with frequency-domain mulitplexing. While this technology has strong heritage in ground-based cosmic microwave background experiments, the broad frequency coverage, low optical loading conditions, and the high cosmic ray background of the space environment require further development of this technology to be suitable for LiteBIRD. In these proceedings, we discuss the optical and bolometeric characterization of a triplexing prototype pixel with bands centered on 78, 100, and 140 GHz. △ Less

Submitted 20 September, 2022; originally announced September 2022.

Comments: SPIE Astronomical Telescope + Instrumentation (AS22)

Report number: 12190-30

Journal ref: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI 2022

CCAT-prime: The 850 GHz camera for Prime-Cam on FYST

Authors: Scott C. Chapman, Anthony I. Huber, Adrian K. Sinclair, Jordan D. Wheeler, Jason E. Austermann, James Beall, James Burgoyne, Steve K. Choi, Abigail Crites, Cody J. Duell, Jesslyn Devina, Jiansong Gao, Mike Fich, Doug Henke, Terry Herter, Doug Johnstone, Lewis B. G. Knee, Michael D. Niemack, Kayla M. Rossi, Gordon Stacey, Joel Tsuchitori, Joel Ullom, Jeff Van Lanen, Eve M. Vavagiakis, Michael Vissers , et al. (1 additional authors not shown)

Abstract: The Fred Young Submillimeter Telescope (FYST) at the Cerro-Chajnantor Atacama Telescope prime (CCAT- prime) Facility will host Prime-Cam as a powerful, first generation camera with imaging polarimeters working at several wavelengths and spectroscopic instruments aimed at intensity map** during the Epoch of Reionization. Here we introduce the 850 GHz (350 micron) instrument module. This will be t… ▽ More The Fred Young Submillimeter Telescope (FYST) at the Cerro-Chajnantor Atacama Telescope prime (CCAT- prime) Facility will host Prime-Cam as a powerful, first generation camera with imaging polarimeters working at several wavelengths and spectroscopic instruments aimed at intensity map** during the Epoch of Reionization. Here we introduce the 850 GHz (350 micron) instrument module. This will be the highest frequency module in Prime-Cam and the most novel for astronomical and cosmological surveys, taking full advantage of the atmospheric transparency at the high 5600 meter CCAT-prime siting on Cerro Chajnantor. With a 1.1 deg diameter field, the 850 GHz module will deploy ~40,000 Kinetic Inductance Detectors (KIDs) with Silicon platelet feedhorn coupling (both fabricated at NIST), and will provide unprecedented broadband intensity and polarization measurement capabilities. The 850 GHz module will be key to addressing pressing astrophysical questions regarding galaxy formation, Big Bang cosmology, and star formation within our own Galaxy. We present the motivation and overall design for the module, and initial laboratory characterization. △ Less

Submitted 22 August, 2022; originally announced August 2022.

Comments: 15 pages, accepted for publication in SPIE

CCAT-prime: Design of the Mod-Cam receiver and 280 GHz MKID instrument module

Authors: Eve M. Vavagiakis, Cody J. Duell, Jason Austermann, James Beall, Tanay Bhandarkar, Scott C. Chapman, Steve K. Choi, Gabriele Coppi, Simon Dicker, Mark Devlin, Rodrigo G. Freundt, Jiansong Gao, Christopher Groppi, Terry L. Herter, Zachary B. Huber, Johannes Hubmayr, Doug Johnstone, Ben Keller, Anna M. Kofman, Yaqiong Li, Philip Mauskopf, Jeff McMahon, Jenna Moore, Colin C. Murphy, Michael D. Niemack , et al. (11 additional authors not shown)

Abstract: Mod-Cam is a first light and commissioning instrument for the CCAT-prime project's six-meter aperture Fred Young Submillimeter Telescope (FYST), currently under construction at 5600 m on Cerro Chajnantor in Chile's Atacama Desert. Prime-Cam, a first-generation science instrument for FYST, will deliver over ten times greater map** speed than current and near-term facilities for unprecedented 280-… ▽ More Mod-Cam is a first light and commissioning instrument for the CCAT-prime project's six-meter aperture Fred Young Submillimeter Telescope (FYST), currently under construction at 5600 m on Cerro Chajnantor in Chile's Atacama Desert. Prime-Cam, a first-generation science instrument for FYST, will deliver over ten times greater map** speed than current and near-term facilities for unprecedented 280-850 GHz broadband and spectroscopic measurements with microwave kinetic inductance detectors (MKIDs). CCAT-prime will address a suite of science goals, from Big Bang cosmology to star formation and galaxy evolution over cosmic time. Mod-Cam deployment on FYST with a 280 GHz instrument module containing MKID arrays is planned for early science observations in 2024. Mod-Cam will be used to test instrument modules for Prime-Cam, which can house up to seven instrument modules. We discuss the design and status of the 0.9 m diameter, 1.8 m long Mod-Cam receiver and 40 cm diameter 280 GHz instrument module, with cold stages at 40 K, 4 K, 1 K, and 100 mK. We also describe the instrument module's cryogenic readout designs to enable the readout of more than 10,000 MKIDs across 18 networks. △ Less

Submitted 10 August, 2022; originally announced August 2022.

Comments: Presented at SPIE Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI

Assembly development for the Simons Observatory focal plane readout module

Authors: Erin Healy, Aamir M. Ali, Kam Arnold, Jason E. Austermann, James A. Beall, Sarah Marie Bruno, Steve K. Choi, Jake Connors, Nicholas F. Cothar, Bradley Dober, Shannon M. Duff, Nicholas Galitzki, Gene Hilton, Shuay-Pwu Patty Ho, Johannes Hubmayr, Bradley R. Johnson, Yaqiong Li, Michael J. Link, Tammy J. Lucas, Heather McCarrick, Michael D. Niemack, Maximiliano Silva-Feaver, Rita F. Sonka, Suzanne Staggs, Eve M. Vavagiakis , et al. (6 additional authors not shown)

Abstract: The Simons Observatory (SO) is a suite of instruments sensitive to temperature and polarization of the cosmic microwave background (CMB) to be located at Cerro Toco in the Atacama Desert in Chile. Five telescopes, one large aperture telescope and four small aperture telescopes, will host roughly 70,000 highly multiplexed transition edge sensor (TES) detectors operated at 100 mK. Each SO focal plan… ▽ More The Simons Observatory (SO) is a suite of instruments sensitive to temperature and polarization of the cosmic microwave background (CMB) to be located at Cerro Toco in the Atacama Desert in Chile. Five telescopes, one large aperture telescope and four small aperture telescopes, will host roughly 70,000 highly multiplexed transition edge sensor (TES) detectors operated at 100 mK. Each SO focal plane module (UFM) couples 1,764 TESes to microwave resonators in a microwave multiplexing (uMux) readout circuit. Before detector integration, the 100 mK uMux components are packaged into multiplexing modules (UMMs), which are independently validated to ensure they meet SO performance specifications. Here we present the assembly developments of these UMM readout packages for mid frequency (90/150 GHz) and ultra high frequency (220/280 GHz) UFMs. △ Less

Submitted 25 July, 2022; v1 submitted 12 April, 2022; originally announced April 2022.

Journal ref: Proc. SPIE 11453, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy X, 1145317 (2020)

Heating of the solar chromosphere through current dissipation

Authors: J. M. da Silva Santos, S. Danilovic, J. Leenaarts, J. de la Cruz Rodríguez, X. Zhu, S. M. White, G. J. M. Vissers, M. Rempel

Abstract: The solar chromosphere is heated to temperatures higher than predicted by radiative equilibrium. This excess heating is greater in active regions where the magnetic field is stronger. We aim to investigate the magnetic topology associated with an area of enhanced millimeter (mm) brightness temperatures in a solar active region mapped by the Atacama Large Millimeter/submillimeter Array (ALMA) using… ▽ More The solar chromosphere is heated to temperatures higher than predicted by radiative equilibrium. This excess heating is greater in active regions where the magnetic field is stronger. We aim to investigate the magnetic topology associated with an area of enhanced millimeter (mm) brightness temperatures in a solar active region mapped by the Atacama Large Millimeter/submillimeter Array (ALMA) using spectropolarimetric co-observations with the 1-m Swedish Solar Telescope (SST). We used Milne-Eddington inversions, nonlocal thermodynamic equilibrium (non-LTE) inversions, and a magnetohydrostatic extrapolation to obtain constraints on the three-dimensional stratification of temperature, magnetic field, and radiative energy losses. We compared the observations to a snapshot of a magnetohydrodynamics simulation and investigate the formation of the thermal continuum at 3 mm using contribution functions. We find enhanced heating rates in the upper chromosphere of up to $\sim 5\rm\,kW\,m^{-2}$, where small-scale emerging loops interact with the overlying magnetic canopy leading to current sheets as shown by the magnetic field extrapolation. Our estimates are about a factor of two higher than canonical values, but they are limited by the ALMA spatial resolution ($\sim 1.2^{\prime\prime}$). Band 3 brightness temperatures reach about $\sim10^{4}\,$K in the region, and the transverse magnetic field strength inferred from the non-LTE inversions is on the order of $\sim 500\,$G in the chromosphere. We are able to quantitatively reproduce many of the observed features, including the integrated radiative losses in our numerical simulation. We conclude that the heating is caused by dissipation in current sheets. However, the simulation shows a complex stratification in the flux emergence region where distinct layers may contribute significantly to the emission in the mm continuum. △ Less

Submitted 19 February, 2022; v1 submitted 8 February, 2022; originally announced February 2022.

Comments: 18 pages, 13 figures. Accepted for publication in A&A. Typos and bibtex corrected

Journal ref: A&A 661, A59 (2022)

COCOPLOT: COlor COllapsed PLOTting software : Using color to view 3D data as a 2D image

Authors: Malcolm K. Druett, Alexander G. M. Pietrow, Gregal J. M. Vissers, Carolina Robustini, Flavio Calvo

Abstract: Most modern solar observatories deliver data products formatted as 3D spatio-temporal data cubes, that contain additional, higher dimensions with spectral and/or polarimetric information. This multi-dimensional complexity presents a major challenge when browsing for features of interest in several dimensions simultaneously. We developed the COlor COllapsed PLOTting (COCOPLOT) software as a quick-l… ▽ More Most modern solar observatories deliver data products formatted as 3D spatio-temporal data cubes, that contain additional, higher dimensions with spectral and/or polarimetric information. This multi-dimensional complexity presents a major challenge when browsing for features of interest in several dimensions simultaneously. We developed the COlor COllapsed PLOTting (COCOPLOT) software as a quick-look and context image software, to convey spectral profile or time evolution from all the spatial pixels ($x,y$) in a 3D [$n_x,n_y,n_λ$] or [$n_x,n_y,n_t$] data cube as a single image, using color. This can avoid the need to scan through many wavelengths, creating difference and composite images when searching for signals satisfying multiple criteria. Filters are generated for the red, green, and blue channels by selecting values of interest to highlight in each channel, and their weightings. These filters are combined with the data cube over the third dimension axis to produce an $n_x \times n_y \times 3$ cube displayed as one true color image. Some use cases are presented for data from the Swedish 1-m Solar Telescope (SST) and IRIS, including H$α$ solar flare data, a comparison with $k$-means clustering for identifying asymmetries in the Ca II K line and off-limb coronal rain in IRIS C II slit-jaw images. These illustrate identification by color alone using COCOPLOT of locations including line wing or central enhancement, broadening, wing absorption, and sites with intermittent flows or time-persistent features. COCOPLOT is publicly available in both IDL and Python. △ Less

Submitted 31 July, 2022; v1 submitted 21 November, 2021; originally announced November 2021.

Comments: Published in RASTI

CCAT-prime: Characterization of the First 280 GHz MKID Array for Prime-Cam

Authors: Steve K. Choi, Cody J. Duell, Jason Austermann, Nicholas F. Cothard, Jiansong Gao, Rodrigo G. Freundt, Christopher Groppi, Terry Herter, Johannes Hubmayr, Zachary B. Huber, Ben Keller, Yaqiong Li, Phillip Mauskopf, Michael D. Niemack, Thomas Nikola, Kayla Rossi, Adrian Sinclair, Gordon J. Stacey, Eve M. Vavagiakis, Michael Vissers, Carole Tucker, Eric Weeks, Jordan Wheeler

Abstract: The Prime-Cam receiver on the Fred Young Submillimeter Telescope for the CCAT-prime project aims to address important astrophysical and cosmological questions with sensitive broadband, polarimetric, and spectroscopic measurements. The primary frequency bands in development include 280, 350, and 850 GHz for the polarization-sensitive broadband channels and 210--420 GHz for the spectrometers. Microw… ▽ More The Prime-Cam receiver on the Fred Young Submillimeter Telescope for the CCAT-prime project aims to address important astrophysical and cosmological questions with sensitive broadband, polarimetric, and spectroscopic measurements. The primary frequency bands in development include 280, 350, and 850 GHz for the polarization-sensitive broadband channels and 210--420 GHz for the spectrometers. Microwave kinetic inductance detectors (MKIDs) are a natural choice of detector technology for the simplicity in multiplexed readout needed for large format arrays at these high frequencies. We present here the initial lab characterization of the feedhorn-coupled 280 GHz polarimetric MKID array, and outline the plans for the subsequent MKID arrays and the development of the testbed to characterize them. △ Less

Submitted 10 August, 2022; v1 submitted 1 November, 2021; originally announced November 2021.

Comments: Version accepted for publication by the Journal of Low Temperature Physics

Performance of a Kinetic-Inductance Traveling-Wave Parametric Amplifier at 4 Kelvin: Toward an Alternative to Semiconductor Amplifiers

Authors: M. Malnou, J. Aumentado, M. R. Vissers, J. D. Wheeler, J. Hubmayr, J. N. Ullom, J. Gao

Abstract: Most microwave readout architectures in quantum computing or sensing rely on a semiconductor amplifier at 4 K, typically a high-electron mobility transistor (HEMT). Despite its remarkable noise performance, a conventional HEMT dissipates several milliwatts of power, posing a practical challenge to scale up the number of qubits or sensors addressed in these architectures. As an alternative, we pres… ▽ More Most microwave readout architectures in quantum computing or sensing rely on a semiconductor amplifier at 4 K, typically a high-electron mobility transistor (HEMT). Despite its remarkable noise performance, a conventional HEMT dissipates several milliwatts of power, posing a practical challenge to scale up the number of qubits or sensors addressed in these architectures. As an alternative, we present an amplification chain consisting of a kinetic-inductance traveling-wave parametric amplifier (KI-TWPA) placed at 4 K, followed by a HEMT placed at 70 K, and demonstrate a chain-added noise $T_Σ= 6.3\pm0.5$ K between 3.5 and 5.5 GHz. While, in principle, any parametric amplifier can be quantum limited even at 4 K, in practice we find the KI-TWPA's performance limited by the temperature of its inputs, and by an excess of noise $T_\mathrm{ex} = 1.9$ K. The dissipation of the KI-TWPA's rf pump constitutes the main power load at 4 K and is about one percent that of a HEMT. These combined noise and power dissipation values pave the way for the KI-TWPA's use as a replacement for semiconductor amplifiers. △ Less

Submitted 15 October, 2021; originally announced October 2021.

Active region chromospheric magnetic fields

Authors: G. J. M. Vissers, S. Danilovic, X. Zhu, J. Leenaarts, C. J. Díaz Baso, J. M. da Silva Santos, J. de la Cruz Rodríguez, T. Wiegelmann

Abstract: Context. A proper estimate of the chromospheric magnetic fields is believed to improve modelling of both active region and coronal mass ejection evolution. Aims. We investigate the similarity between the chromospheric magnetic field inferred from observations and the field obtained from a magnetohydrostatic (MHS) extrapolation. Methods. Based Fe i 6173 Å and Ca ii 8542 Å observations of NOAA activ… ▽ More Context. A proper estimate of the chromospheric magnetic fields is believed to improve modelling of both active region and coronal mass ejection evolution. Aims. We investigate the similarity between the chromospheric magnetic field inferred from observations and the field obtained from a magnetohydrostatic (MHS) extrapolation. Methods. Based Fe i 6173 Å and Ca ii 8542 Å observations of NOAA active region 12723, we employed the spatially-regularised weak-field approximation (WFA) to derive the vector magnetic field in the chromosphere from Ca ii, as well as non-LTE inversions of Fe i and Ca ii to infer a model atmosphere for selected regions. Milne-Eddington inversions of Fe i serve as photospheric boundary for the MHS model that delivers the three-dimensional field, gas pressure and density. Results. For the line-of-sight component, the MHS chromospheric field generally agrees with the non-LTE inversions and WFA, but tends to be weaker than those when larger in magnitude than 300 G. The observationally inferred transverse component is stronger, especially in magnetically weaker regions, yet the qualitative distribution with height is similar to the MHS results. For either field component the MHS chromospheric field lacks the fine structure derived from the inversions. Furthermore, the MHS model does not recover the magnetic imprint from a set of high fibrils connecting the main polarities. Conclusions. The MHS extrapolation and WFA provide a qualitatively similar chromospheric field, where the azimuth of the former is better aligned with Ca ii 8542 Å fibrils than that of the WFA, especially outside strong-field concentrations. The amount of structure as well as the transverse field strengths are underestimated by the MHS extrapolation. This underscores the importance of considering a chromospheric magnetic field constraint in data-driven modelling of active regions. △ Less

Submitted 7 September, 2021; originally announced September 2021.

Comments: under review at A&A, abstract has been abridged

Journal ref: A&A 662, A88 (2022)

CCAT-prime Collaboration: Science Goals and Forecasts with Prime-Cam on the Fred Young Submillimeter Telescope

Authors: CCAT-Prime collaboration, M. Aravena, J. E. Austermann, K. Basu, N. Battaglia, B. Beringue, F. Bertoldi, F. Bigiel, J. R. Bond, P. C. Breysse, C. Broughton, R. Bustos, S. C. Chapman, M. Charmetant, S. K. Choi, D. T. Chung, S. E. Clark, N. F. Cothard, A. T. Crites, A. Dev, K. Douglas, C. J. Duell, R. Dunner, H. Ebina, J. Erler , et al. (62 additional authors not shown)

Abstract: We present a detailed overview of the science goals and predictions for the Prime-Cam direct detection camera/spectrometer being constructed by the CCAT-prime collaboration for dedicated use on the Fred Young Submillimeter Telescope (FYST). The FYST is a wide-field, 6-m aperture submillimeter telescope being built (first light in mid-2024) by an international consortium of institutions led by Corn… ▽ More We present a detailed overview of the science goals and predictions for the Prime-Cam direct detection camera/spectrometer being constructed by the CCAT-prime collaboration for dedicated use on the Fred Young Submillimeter Telescope (FYST). The FYST is a wide-field, 6-m aperture submillimeter telescope being built (first light in mid-2024) by an international consortium of institutions led by Cornell University and sited at more than 5600 meters on Cerro Chajnantor in northern Chile. Prime-Cam is one of two instruments planned for FYST and will provide unprecedented spectroscopic and broadband measurement capabilities to address important astrophysical questions ranging from Big Bang cosmology through reionization and the formation of the first galaxies to star formation within our own Milky Way galaxy. Prime-Cam on the FYST will have a map** speed that is over ten times greater than existing and near-term facilities for high-redshift science and broadband polarimetric imaging at frequencies above 300 GHz. We describe details of the science program enabled by this system and our preliminary survey strategies. △ Less

Submitted 8 August, 2022; v1 submitted 21 July, 2021; originally announced July 2021.

Comments: 61 pages, 16 figures. Resubmitted to ApJSS July 11, 2022

Observations of compact sources in galaxy clusters using MUSTANG2

Authors: Simon R. Dicker, Elia S. Battistelli, Tanay Bhandarkar, Mark J. Devlin, Shannon M. Duff, Gene Hilton, Matt Hilton, Adam D. Hincks, Johannes Hubmayr, Kevin Huffenberger, John P. Hughes, Luca Di Mascolo, Brian S. Mason, J. A. B. Mates, Jeff McMahon, Tony Mroczkowski, Sigurd Naess, John Orlowski-Scherer, Bruce Partridge, Federico Radiconi, Charles Romero, Craig L. Sarazin, Neelima Sehgal, Jonathan Sievers, Cristóbal Sifón , et al. (4 additional authors not shown)

Abstract: Compact sources can cause scatter in the scaling relationships between the amplitude of the thermal Sunyaev-Zel'dovich Effect (tSZE) in galaxy clusters and cluster mass. Estimates of the importance of this scatter vary - largely due to limited data on sources in clusters at the frequencies at which tSZE cluster surveys operate. In this paper we present 90 GHz compact source measurements from a sam… ▽ More Compact sources can cause scatter in the scaling relationships between the amplitude of the thermal Sunyaev-Zel'dovich Effect (tSZE) in galaxy clusters and cluster mass. Estimates of the importance of this scatter vary - largely due to limited data on sources in clusters at the frequencies at which tSZE cluster surveys operate. In this paper we present 90 GHz compact source measurements from a sample of 30 clusters observed using the MUSTANG2 instrument on the Green Bank Telescope. We present simulations of how a source's flux density, spectral index, and angular separation from the cluster's center affect the measured tSZE in clusters detected by the Atacama Cosmology Telescope (ACT). By comparing the MUSTANG2 measurements with these simulations we calibrate an empirical relationship between 1.4 GHz flux densities from radio surveys and source contamination in ACT tSZE measurements. We find 3 per cent of the ACT clusters have more than a 20 per cent decrease in Compton-y but another 3 per cent have a 10 per cent increase in the Compton-y due to the matched filters used to find clusters. As sources affect the measured tSZE signal and hence the likelihood that a cluster will be detected, testing the level of source contamination in the tSZE signal using a tSZE selected catalog is inherently biased. We confirm this by comparing the ACT tSZE catalog with optically and X-ray selected cluster catalogs. There is a strong case for a large, high resolution survey of clusters to better characterize their source population. △ Less

Submitted 22 September, 2021; v1 submitted 14 July, 2021; originally announced July 2021.

Comments: 13 Pages, 10 figures, 2 tables, with 4 pages of online only figures at end. Published on-line in MNRAS on 22/9/2021

A high-resolution view of the filament of gas between Abell 399 and Abell 401 from the Atacama Cosmology Telescope and MUSTANG-2

Authors: Adam D. Hincks, Federico Radiconi, Charles Romero, Mathew S. Madhavacheril, Tony Mroczkowski, Jason E. Austermann, Eleonora Barbavara, Nicholas Battaglia, Elia Battistelli, J. Richard Bond, Erminia Calabrese, Paolo de Bernardis, Mark J. Devlin, Simon R. Dicker, Shannon M. Duff, Adriaan J. Duivenvoorden, Jo Dunkley, Rolando Dünner, Patricio A. Gallardo, Federica Govoni, J. Colin Hill, Matt Hilton, Johannes Hubmayr, John P. Hughes, Luca Lamagna , et al. (21 additional authors not shown)

Abstract: We report a significant detection of the hot intergalactic medium in the filamentary bridge connecting the galaxy clusters Abell 399 and Abell 401. This result is enabled by a low-noise, high-resolution map of the thermal Sunyaev-Zeldovich signal from the Atacama Cosmology Telescope (ACT) and Planck satellite. The ACT data provide the $1.65'$ resolution that allows us to clearly separate the profi… ▽ More We report a significant detection of the hot intergalactic medium in the filamentary bridge connecting the galaxy clusters Abell 399 and Abell 401. This result is enabled by a low-noise, high-resolution map of the thermal Sunyaev-Zeldovich signal from the Atacama Cosmology Telescope (ACT) and Planck satellite. The ACT data provide the $1.65'$ resolution that allows us to clearly separate the profiles of the clusters, whose centres are separated by $37'$, from the gas associated with the filament. A model that fits for only the two clusters is ruled out compared to one that includes a bridge component at $>5σ$. Using a gas temperature determined from Suzaku X-ray data, we infer a total mass of $(3.3\pm0.7)\times10^{14}\,\mathrm{M}_{\odot}$ associated with the filament, comprising about $8\%$ of the entire Abell 399-Abell 401 system. We fit two phenomenological models to the filamentary structure; the favoured model has a width transverse to the axis joining the clusters of ${\sim}1.9\,\mathrm{Mpc}$. When combined with the Suzaku data, we find a gas density of $(0.88\pm0.24)\times10^{-4}\,\mathrm{cm}^{-3}$, considerably lower than previously reported. We show that this can be fully explained by a geometry in which the axis joining Abell 399 and Abell 401 has a large component along the line of sight, such that the distance between the clusters is significantly greater than the $3.2\,\mathrm{Mpc}$ projected separation on the plane of the sky. Finally, we present initial results from higher resolution ($12.7"$ effective) imaging of the bridge with the MUSTANG-2 receiver on the Green Bank Telescope. △ Less

Submitted 26 November, 2021; v1 submitted 9 July, 2021; originally announced July 2021.

Comments: 23 pages, 10 figures, 3 tables. This is a pre-copyedited, author-produced PDF of an article accepted for publication in the Monthly Notices of the Royal Astronomical Society following peer review. The version of record is available online at: https://academic.oup.com/mnras/advance-article/doi/10.1093/mnras/stab3391/6442294

The Simons Observatory microwave SQUID multiplexing detector module design

Authors: Heather McCarrick, Erin Healy, Zeeshan Ahmed, Kam Arnold, Zachary Atkins, Jason E. Austermann, Tanay Bhandarkar, Jim A. Beall, Sarah Marie Bruno, Steve K. Choi, Jake Connors, Nicholas F. Cothard, Kevin D. Crowley, Simon Dicker, Bradley Dober, Cody J. Duell, Shannon M. Duff, Daniel Dutcher, Josef C. Frisch, Nicholas Galitzki, Megan B. Gralla, Jon E. Gudmundsson, Shawn W. Henderson, Gene C. Hilton, Shuay-Pwu Patty Ho , et al. (34 additional authors not shown)

Abstract: Advances in cosmic microwave background (CMB) science depend on increasing the number of sensitive detectors observing the sky. New instruments deploy large arrays of superconducting transition-edge sensor (TES) bolometers tiled densely into ever larger focal planes. High multiplexing factors reduce the thermal loading on the cryogenic receivers and simplify their design. We present the design of… ▽ More Advances in cosmic microwave background (CMB) science depend on increasing the number of sensitive detectors observing the sky. New instruments deploy large arrays of superconducting transition-edge sensor (TES) bolometers tiled densely into ever larger focal planes. High multiplexing factors reduce the thermal loading on the cryogenic receivers and simplify their design. We present the design of focal-plane modules with an order of magnitude higher multiplexing factor than has previously been achieved with TES bolometers. We focus on the novel cold readout component, which employs microwave SQUID multiplexing ($μ$mux). Simons Observatory will use 49 modules containing 60,000 bolometers to make exquisitely sensitive measurements of the CMB. We validate the focal-plane module design, presenting measurements of the readout component with and without a prototype detector array of 1728 polarization-sensitive bolometers coupled to feedhorns. The readout component achieves a $95\%$ yield and a 910 multiplexing factor. The median white noise of each readout channel is 65 $\mathrm{pA/\sqrt{Hz}}$. This impacts the projected SO map** speed by $< 8\%$, which is less than is assumed in the sensitivity projections. The results validate the full functionality of the module. We discuss the measured performance in the context of SO science requirements, which are exceeded. △ Less

Submitted 16 September, 2021; v1 submitted 28 June, 2021; originally announced June 2021.

Comments: Accepted to The Astrophysical Journal

Journal ref: 2021 ApJ 922 38

The Simons Observatory: the Large Aperture Telescope (LAT)

Authors: Zhilei Xu, Shunsuke Adachi, Peter Ade, J. A. Beall, Tanay Bhandarkar, J. Richard Bond, Grace E. Chesmore, Yuji Chinone, Steve K. Choi, Jake A. Connors, Gabriele Coppi, Nicholas F. Cothard, Kevin D. Crowley, Mark Devlin, Simon Dicker, Bradley Dober, Shannon M. Duff, Nicholas Galitzki, Patricio A. Gallardo, Joseph E. Golec, Jon E. Gudmundsson, Saianeesh K. Haridas, Kathleen Harrington, Carlos Hervias-Caimapo, Shuay-Pwu Patty Ho , et al. (35 additional authors not shown)

Abstract: The Simons Observatory (SO) is a Cosmic Microwave Background (CMB) experiment to observe the microwave sky in six frequency bands from 30GHz to 290GHz. The Observatory -- at $\sim$5200m altitude -- comprises three Small Aperture Telescopes (SATs) and one Large Aperture Telescope (LAT) at the Atacama Desert, Chile. This research note describes the design and current status of the LAT along with its… ▽ More The Simons Observatory (SO) is a Cosmic Microwave Background (CMB) experiment to observe the microwave sky in six frequency bands from 30GHz to 290GHz. The Observatory -- at $\sim$5200m altitude -- comprises three Small Aperture Telescopes (SATs) and one Large Aperture Telescope (LAT) at the Atacama Desert, Chile. This research note describes the design and current status of the LAT along with its future timeline. △ Less

Submitted 29 April, 2021; v1 submitted 19 April, 2021; originally announced April 2021.

Comments: 4 pages, 1 figure

Journal ref: Research Notes AAS, 5, 100 (2021)

The Simons Observatory Large Aperture Telescope Receiver

Authors: Ningfeng Zhu, Tanay Bhandarkar, Gabriele Coppi, Anna M. Kofman, John L. Orlowski-Scherer, Zhilei Xu, Shunsuke Adachi, Peter Ade, Simone Aiola, Jason Austermann, Andrew O. Bazarko, James A. Beall, Sanah Bhimani, J. Richard Bond, Grace E. Chesmore, Steve K. Choi, Jake Connors, Nicholas F. Cothard, Mark Devlin, Simon Dicker, Bradley Dober, Cody J. Duell, Shannon M. Duff, Rolando Dünner, Giulio Fabbian , et al. (46 additional authors not shown)

Abstract: The Simons Observatory (SO) Large Aperture Telescope Receiver (LATR) will be coupled to the Large Aperture Telescope located at an elevation of 5,200 m on Cerro Toco in Chile. The resulting instrument will produce arcminute-resolution millimeter-wave maps of half the sky with unprecedented precision. The LATR is the largest cryogenic millimeter-wave camera built to date with a diameter of 2.4 m an… ▽ More The Simons Observatory (SO) Large Aperture Telescope Receiver (LATR) will be coupled to the Large Aperture Telescope located at an elevation of 5,200 m on Cerro Toco in Chile. The resulting instrument will produce arcminute-resolution millimeter-wave maps of half the sky with unprecedented precision. The LATR is the largest cryogenic millimeter-wave camera built to date with a diameter of 2.4 m and a length of 2.6 m. It cools 1200 kg of material to 4 K and 200 kg to 100 mk, the operating temperature of the bolometric detectors with bands centered around 27, 39, 93, 145, 225, and 280 GHz. Ultimately, the LATR will accommodate 13 40 cm diameter optics tubes, each with three detector wafers and a total of 62,000 detectors. The LATR design must simultaneously maintain the optical alignment of the system, control stray light, provide cryogenic isolation, limit thermal gradients, and minimize the time to cool the system from room temperature to 100 mK. The interplay between these competing factors poses unique challenges. We discuss the trade studies involved with the design, the final optimization, the construction, and ultimate performance of the system. △ Less

Submitted 3 March, 2021; originally announced March 2021.

Overview of the Medium and High Frequency Telescopes of the LiteBIRD satellite mission

Authors: L. Montier, B. Mot, P. de Bernardis, B. Maffei, G. Pisano, F. Columbro, J. E. Gudmundsson, S. Henrot-Versillé, L. Lamagna, J. Montgomery, T. Prouvé, M. Russell, G. Savini, S. Stever, K. L. Thompson, M. Tsujimoto, C. Tucker, B. Westbrook, P. A. R. Ade, A. Adler, E. Allys, K. Arnold, D. Auguste, J. Aumont, R. Aurlien , et al. (212 additional authors not shown)

Abstract: LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular… ▽ More LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular scales, and over 15 frequency bands from 34GHz to 448GHz. The LiteBIRD instruments consist of three telescopes, namely the Low-, Medium- and High-Frequency Telescope (respectively LFT, MFT and HFT). We present in this paper an overview of the design of the Medium-Frequency Telescope (89-224GHz) and the High-Frequency Telescope (166-448GHz), the so-called MHFT, under European responsibility, which are two cryogenic refractive telescopes cooled down to 5K. They include a continuous rotating half-wave plate as the first optical element, two high-density polyethylene (HDPE) lenses and more than three thousand transition-edge sensor (TES) detectors cooled to 100mK. We provide an overview of the concept design and the remaining specific challenges that we have to face in order to achieve the scientific goals of LiteBIRD. △ Less

Submitted 1 February, 2021; originally announced February 2021.

Comments: SPIE Conference

Journal ref: Proc. of SPIE Vol. 11443 14432G (2020)

LiteBIRD: JAXA's new strategic L-class mission for all-sky surveys of cosmic microwave background polarization

Authors: M. Hazumi, P. A. R. Ade, A. Adler, E. Allys, K. Arnold, D. Auguste, J. Aumont, R. Aurlien, J. Austermann, C. Baccigalupi, A. J. Banday, R. Banjeri, R. B. Barreiro, S. Basak, J. Beall, D. Beck, S. Beckman, J. Bermejo, P. de Bernardis, M. Bersanelli, J. Bonis, J. Borrill, F. Boulanger, S. Bounissou, M. Brilenkov , et al. (213 additional authors not shown)

Abstract: LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave backgrou… ▽ More LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave background (CMB) polarization over the full sky with unprecedented precision. Its main scientific objective is to carry out a definitive search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with an insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. To this end, LiteBIRD will perform full-sky surveys for three years at the Sun-Earth Lagrangian point L2 for 15 frequency bands between 34 and 448 GHz with three telescopes, to achieve a total sensitivity of 2.16 micro K-arcmin with a typical angular resolution of 0.5 deg. at 100GHz. We provide an overview of the LiteBIRD project, including scientific objectives, mission requirements, top-level system requirements, operation concept, and expected scientific outcomes. △ Less

Submitted 29 January, 2021; originally announced January 2021.

Comments: 20 pages, 9 figures

Journal ref: Proc. of SPIE Vol. 11443 114432F (2020)

The design of the Ali CMB Polarization Telescope receiver

Authors: Maria Salatino, Jason E. Austermann, Keith L. Thompson, Peter A. R. Ade, Xiran Bai, James A. Beall, Dan T. Becker, Yifu Cai, Zhi Chang, Ding Chen, Pisin Chen, Jake Connors, Jacques Delabrouille, Bradley Dober, Shannon M. Duff, Guanhua Gao, Shamik Ghosh, Richard C. Givhan, Gene C. Hilton, Bin Hu, Johannes Hubmayr, Ethan D. Karpel, Chao-Lin Kuo, Hong Li, Mingzhe Li , et al. (50 additional authors not shown)

Abstract: Ali CMB Polarization Telescope (AliCPT-1) is the first CMB degree-scale polarimeter to be deployed on the Tibetan plateau at 5,250m above sea level. AliCPT-1 is a 90/150 GHz 72 cm aperture, two-lens refracting telescope cooled down to 4 K. Alumina lenses, 800mm in diameter, image the CMB in a 33.4° field of view on a 636mm wide focal plane. The modularized focal plane consists of dichroic polariza… ▽ More Ali CMB Polarization Telescope (AliCPT-1) is the first CMB degree-scale polarimeter to be deployed on the Tibetan plateau at 5,250m above sea level. AliCPT-1 is a 90/150 GHz 72 cm aperture, two-lens refracting telescope cooled down to 4 K. Alumina lenses, 800mm in diameter, image the CMB in a 33.4° field of view on a 636mm wide focal plane. The modularized focal plane consists of dichroic polarization-sensitive Transition-Edge Sensors (TESes). Each module includes 1,704 optically active TESes fabricated on a 150mm diameter silicon wafer. Each TES array is read out with a microwave multiplexing readout system capable of a multiplexing factor up to 2,048. Such a large multiplexing factor has allowed the practical deployment of tens of thousands of detectors, enabling the design of a receiver that can operate up to 19 TES arrays for a total of 32,376 TESes. AliCPT-1 leverages the technological advancements in the detector design from multiple generations of previously successful feedhorn-coupled polarimeters, and in the instrument design from BICEP-3, but applied on a larger scale. The cryostat receiver is currently under integration and testing. During the first deployment year, the focal plane will be populated with up to 4 TES arrays. Further TES arrays will be deployed in the following years, fully populating the focal plane with 19 arrays on the fourth deployment year. Here we present the AliCPT-1 receiver design, and how the design has been optimized to meet the experimental requirements. △ Less

Submitted 23 January, 2021; originally announced January 2021.

Comments: Proc. SPIE, 11453, 114532A (2020)

Journal ref: Proceedings of SPIE, 'Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy X', Volume 11453, 114532A (2020)

Concept Design of Low Frequency Telescope for CMB B-mode Polarization satellite LiteBIRD

Authors: Y. Sekimoto, P. A. R. Ade, A. Adler, E. Allys, K. Arnold, D. Auguste, J. Aumont, R. Aurlien, J. Austermann, C. Baccigalupi, A. J. Banday, R. Banerji, R. B. Barreiro, S. Basak, J. Beall, D. Beck, S. Beckman, J. Bermejo, P. de Bernardis, M. Bersanelli, J. Bonis, J. Borrill, F. Boulanger, S. Bounissou, M. Brilenkov , et al. (212 additional authors not shown)

Abstract: LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray li… ▽ More LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray light increase with a wider FoV and the far sidelobe knowledge of $-56$ dB is a challenging optical requirement. A crossed-Dragone configuration was chosen for the low frequency telescope (LFT : 34--161 GHz), one of LiteBIRD's onboard telescopes. It has a wide field-of-view ($18^\circ \times 9^\circ$) with an aperture of 400 mm in diameter, corresponding to an angular resolution of about 30 arcminutes around 100 GHz. The focal ratio f/3.0 and the crossing angle of the optical axes of 90$^\circ$ are chosen after an extensive study of the stray light. The primary and secondary reflectors have rectangular shapes with serrations to reduce the diffraction pattern from the edges of the mirrors. The reflectors and structure are made of aluminum to proportionally contract from warm down to the operating temperature at $5\,$K. A 1/4 scaled model of the LFT has been developed to validate the wide field-of-view design and to demonstrate the reduced far sidelobes. A polarization modulation unit (PMU), realized with a half-wave plate (HWP) is placed in front of the aperture stop, the entrance pupil of this system. A large focal plane with approximately 1000 AlMn TES detectors and frequency multiplexing SQUID amplifiers is cooled to 100 mK. The lens and sinuous antennas have broadband capability. Performance specifications of the LFT and an outline of the proposed verification plan are presented. △ Less

Submitted 15 January, 2021; originally announced January 2021.

Comments: 21 pages, 14 figures

Journal ref: SPIE proceedings 1145310 (2020)

Detector fabrication development for the LiteBIRD satellite mission

Authors: Benjamin Westbrook, Christopher Raum, Shawn Beckman, Adrian T. Lee, Nicole Farias, Trevor Sasse, Aritoki Suzuki, Elijah Kane, Jason E. Austermann, James A Beall, Shannon M. Duff, Johannes Hubmayr, Gene C. Hilton, Jeff Van Lanen, Michael R. Vissers, Michael R. Link, Greg Jaehnig, Nils Halverson, Tommaso Ghinga, Samantha Stever, Yuto Minami, Keith L. Thompson, Megan Russell, Kam Arnold, Joseph Siebert , et al. (2 additional authors not shown)

Abstract: LiteBIRD is a JAXA-led strategic Large-Class satellite mission designed to measure the polarization of the cosmic microwave background and cosmic foregrounds from 34 to 448 GHz across the entire sky from L2 in the late 2020's. The primary focus of the mission is to measure primordially generated B-mode polarization at large angular scales. Beyond its primary scientific objective LiteBIRD will gene… ▽ More LiteBIRD is a JAXA-led strategic Large-Class satellite mission designed to measure the polarization of the cosmic microwave background and cosmic foregrounds from 34 to 448 GHz across the entire sky from L2 in the late 2020's. The primary focus of the mission is to measure primordially generated B-mode polarization at large angular scales. Beyond its primary scientific objective LiteBIRD will generate a data-set capable of probing a number of scientific inquiries including the sum of neutrino masses. The primary responsibility of United States will be to fabricate the three flight model focal plane units for the mission. The design and fabrication of these focal plane units is driven by heritage from ground based experiments and will include both lenslet-coupled sinuous antenna pixels and horn-coupled orthomode transducer pixels. The experiment will have three optical telescopes called the low frequency telescope, mid frequency telescope, and high frequency telescope each of which covers a portion of the mission's frequency range. JAXA is responsible for the construction of the low frequency telescope and the European Consortium is responsible for the mid- and high- frequency telescopes. The broad frequency coverage and low optical loading conditions, made possible by the space environment, require development and adaptation of detector technology recently deployed by other cosmic microwave background experiments. This design, fabrication, and characterization will take place at UC Berkeley, NIST, Stanford, and Colorado University, Boulder. We present the current status of the US deliverables to the LiteBIRD mission. △ Less

Submitted 13 January, 2021; originally announced January 2021.

Comments: SPIE, Cosmology, LiteBIRD, Detectors, TES, Bolometers, Inflation, Sinuous Antenna, Horn Coupled, DfMUX

Design and pre-flight performance of SPIDER 280 GHz receivers

Authors: E. C. Shaw, P. A. R. Ade, S. Akers, M. Amiri, J. Austermann, J. Beall, D. T. Becker, S. J. Benton, A. S. Bergman, J. J. Bock, J. R. Bond, S. A. Bryan, H. C. Chiang, C. R. Contaldi, R. S. Domagalski, O. Doré, S. M. Duff, A. J. Duivenvoorden, H. K. Eriksen, M. Farhang, J. P. Filippini, L. M. Fissel, A. A. Fraisse, K. Freese, M. Galloway , et al. (57 additional authors not shown)

Abstract: In this work we describe upgrades to the Spider balloon-borne telescope in preparation for its second flight, currently planned for December 2021. The Spider instrument is optimized to search for a primordial B-mode polarization signature in the cosmic microwave background at degree angular scales. During its first flight in 2015, Spider mapped ~10% of the sky at 95 and 150 GHz. The payload for th… ▽ More In this work we describe upgrades to the Spider balloon-borne telescope in preparation for its second flight, currently planned for December 2021. The Spider instrument is optimized to search for a primordial B-mode polarization signature in the cosmic microwave background at degree angular scales. During its first flight in 2015, Spider mapped ~10% of the sky at 95 and 150 GHz. The payload for the second Antarctic flight will incorporate three new 280 GHz receivers alongside three refurbished 95- and 150 GHz receivers from Spider's first flight. In this work we discuss the design and characterization of these new receivers, which employ over 1500 feedhorn-coupled transition-edge sensors. We describe pre-flight laboratory measurements of detector properties, and the optical performance of completed receivers. These receivers will map a wide area of the sky at 280 GHz, providing new information on polarized Galactic dust emission that will help to separate it from the cosmological signal. △ Less

Submitted 22 December, 2020; originally announced December 2020.

Comments: 13 pages, 8 figures; as published in the conference proceedings for SPIE Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy X (2020)

Journal ref: "Design and pre-flight performance of SPIDER 280 GHz receivers," Proc. SPIE 11453, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy X, 114532F (13 December 2020)

CCAT-prime: Designs and status of the first light 280 GHz MKID array and Mod-Cam receiver

Authors: Cody J. Duell, Eve M. Vavagiakis, Jason Austermann, Scott C. Chapman, Steve K. Choi, Nicholas F. Cothard, Brad Dober, Patricio Gallardo, Jiansong Gao, Christopher Groppi, Terry L. Herter, Gordon J. Stacey, Zachary Huber, Johannes Hubmayr, Doug Johnstone, Yaqiong Li, Philip Mauskopf, Jeff McMahon, Michael D. Niemack, Thomas Nikola, Kayla Rossi, Sara Simon, Adrian K. Sinclair, Michael Vissers, Jordan Wheeler , et al. (1 additional authors not shown)

Abstract: The CCAT-prime project's first light array will be deployed in Mod-Cam, a single-module testbed and first light cryostat, on the Fred Young Submillimeter Telescope (FYST) in Chile's high Atacama desert in late 2022. FYST is a six-meter aperture telescope being built on Cerro Chajnantor at an elevation of 5600 meters to observe at millimeter and submillimeter wavelengths.1 Mod-Cam will pave the way… ▽ More The CCAT-prime project's first light array will be deployed in Mod-Cam, a single-module testbed and first light cryostat, on the Fred Young Submillimeter Telescope (FYST) in Chile's high Atacama desert in late 2022. FYST is a six-meter aperture telescope being built on Cerro Chajnantor at an elevation of 5600 meters to observe at millimeter and submillimeter wavelengths.1 Mod-Cam will pave the way for Prime-Cam, the primary first generation instrument, which will house up to seven instrument modules to simultaneously observe the sky and study a diverse set of science goals from monitoring protostars to probing distant galaxy clusters and characterizing the cosmic microwave background (CMB). At least one feedhorn-coupled array of microwave kinetic inductance detectors (MKIDs) centered on 280 GHz will be included in Mod-Cam at first light, with additional instrument modules to be deployed along with Prime-Cam in stages. The first 280 GHz detector array was fabricated by the Quantum Sensors Group at NIST in Boulder, CO and includes 3,456 polarization-sensitive MKIDs. Current mechanical designs allow for up to three hexagonal arrays to be placed in each single instrument module. We present details on this first light detector array, including mechanical designs and cold readout plans, as well as introducing Mod-Cam as both a testbed and predecessor to Prime-Cam. △ Less

Submitted 13 January, 2021; v1 submitted 18 December, 2020; originally announced December 2020.

Comments: 9 pages, 6 figures, SPIE Astronomical Telescopes + Instrumentation 2020, Paper Number: 11453-58

The Simons Observatory: the Large Aperture Telescope Receiver (LATR) Integration and Validation Results

Authors: Zhilei Xu, Tanay Bhandarkar, Gabriele Coppi, Anna M. Kofman, John L. Orlowski-Scherer, Ningfeng Zhu, Aamir M. Ali, Kam Arnold, Jason E. Austermann, Steve K. Choi, Jake Connors, Nicholas F. Cothard, Mark Devlin, Simon Dicker, Bradley Dober, Shannon M. Duff, Giulio Fabbian, Nicholas Galitzki, Saianeesh K. Haridas, Kathleen Harrington, Erin Healy, Shuay-Pwu Patty Ho, Johannes Hubmayr, Jeffrey Iuliano, Jack Lashner , et al. (20 additional authors not shown)

Abstract: The Simons Observatory (SO) will observe the cosmic microwave background (CMB) from Cerro Toco in the Atacama Desert of Chile. The observatory consists of three 0.5 m Small Aperture Telescopes (SATs) and one 6 m Large Aperture Telescope (LAT), covering six frequency bands centering around 30, 40, 90, 150, 230, and 280 GHz. The SO observations will transform the understanding of our universe by cha… ▽ More The Simons Observatory (SO) will observe the cosmic microwave background (CMB) from Cerro Toco in the Atacama Desert of Chile. The observatory consists of three 0.5 m Small Aperture Telescopes (SATs) and one 6 m Large Aperture Telescope (LAT), covering six frequency bands centering around 30, 40, 90, 150, 230, and 280 GHz. The SO observations will transform the understanding of our universe by characterizing the properties of the early universe, measuring the number of relativistic species and the mass of neutrinos, improving our understanding of galaxy evolution, and constraining the properties of cosmic reionization. As a critical instrument, the Large Aperture Telescope Receiver (LATR) is designed to cool $\sim$ 60,000 transition-edge sensors (TES) to $<$ 100 mK on a 1.7 m diameter focal plane. The unprecedented scale of the LATR drives a complex design. In this paper, we will first provide an overview of the LATR design. Integration and validation of the LATR design are discussed in detail, including mechanical strength, optical alignment, and cryogenic performance of the five cryogenic stages (80 K, 40 K, 4 K, 1 K, and 100 mK). We will also discuss the microwave-multiplexing ($μ$Mux) readout system implemented in the LATR and demonstrate the operation of dark prototype TES bolometers. The $μ$Mux readout technology enables one coaxial loop to read out $\mathcal{O}(10^3)$ TES detectors. Its implementation within the LATR serves as a critical validation for the complex RF chain design. The successful validation of the LATR performance is not only a critical milestone within the Simons Observatory, it also provides a valuable reference for other experiments, e.g. CCAT-prime and CMB-S4. △ Less

Submitted 14 December, 2020; originally announced December 2020.

Comments: 20 pages, 12 figures, submitted to the 2020 SPIE Astronomical Telescopes + Instrumentation

The Simons Observatory: Magnetic Sensitivity Measurements of Microwave SQUID Multiplexers

Authors: Eve M. Vavagiakis, Zeeshan Ahmed, Aamir Ali, Kam Arnold, Jason Austermann, Sarah Marie Bruno, Steve K. Choi, Jake Connors, Nicholas F. Cothard, Simon Dicker, Brad Dober, Shannon Duff, Valentina Fanfani, Erin Healy, Shawn Henderson, Shuay-Pwu Patty Ho, Duc-Thuong Hoang, Gene Hilton, Johannes Hubmayr, Nicoletta Krachmalnicoff, Yaqiong Li, John Mates, Heather McCarrick, Federico Nati, Michael Niemack , et al. (8 additional authors not shown)

Abstract: The Simons Observatory (SO) will be a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes and one large-aperture telescope, which will observe from the Atacama Desert in Chile. In total, SO will field $\sim$70,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measur… ▽ More The Simons Observatory (SO) will be a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes and one large-aperture telescope, which will observe from the Atacama Desert in Chile. In total, SO will field $\sim$70,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain numerous cosmological quantities. The SO Universal Focal Plane Modules (UFMs) each contain a 150 mm diameter TES detector array, horn or lenslet optical coupling, cold readout components, and magnetic shielding. SO will use a microwave SQUID multiplexing ($μ$MUX) readout at an initial multiplexing factor of $\sim$1000; the cold (100 mK) readout components are packaged in a $μ$MUX readout module, which is part of the UFM, and can also be characterized independently. The 100 mK stage TES bolometer arrays and microwave SQUIDs are sensitive to magnetic fields, and their measured response will vary with the degree to which they are magnetically shielded. We present measurements of the magnetic pickup of test microwave SQUID multiplexers as a study of various shielding configurations for the Simons Observatory. We discuss how these measurements motivated the material choice and design of the UFM magnetic shielding. △ Less

Submitted 8 December, 2020; originally announced December 2020.

Comments: 5 pages, 6 figures, conference proceedings submitted to IEEE Transactions on Applied Superconductivity

Journal ref: IEEE Transactions on Applied Superconductivity, vol. 31, issue 5, id. 3069294 (Aug 2021)

The Balloon-Borne Large Aperture Submillimeter Telescope Observatory

Authors: Ian Lowe, Gabriele Coppi, Peter A. R. Ade, Peter C. Ashton, Jason E. Austermann, James Beall, Susan Clark, Erin G. Cox, Mark J. Devlin, Simon Dicker, Bradley J. Dober, Valentina Fanfani, Laura M. Fissel, Nicholas Galitzki, Jiansong Gao, Brandon Hensley, Johannes Hubmayr, Steven Li, Zhi-Yun Li, Nathan P. Lourie, Peter G. Martin, Philip Mauskopf, Federico Nati, Giles Novak, Giampaolo Pisano , et al. (8 additional authors not shown)

Abstract: The BLAST Observatory is a proposed superpressure balloon-borne polarimeter designed for a future ultra-long duration balloon campaign from Wanaka, New Zealand. To maximize scientific output while staying within the stringent superpressure weight envelope, BLAST will feature new 1.8m off-axis optical system contained within a lightweight monocoque structure gondola. The payload will incorporate a… ▽ More The BLAST Observatory is a proposed superpressure balloon-borne polarimeter designed for a future ultra-long duration balloon campaign from Wanaka, New Zealand. To maximize scientific output while staying within the stringent superpressure weight envelope, BLAST will feature new 1.8m off-axis optical system contained within a lightweight monocoque structure gondola. The payload will incorporate a 300L $^4$He cryogenic receiver which will cool 8,274 microwave kinetic inductance detectors (MKIDs) to 100mK through the use of an adiabatic demagnetization refrigerator (ADR) in combination with a $^3$He sorption refrigerator all backed by a liquid helium pumped pot operating at 2K. The detector readout utilizes a new Xilinx RFSOC-based system which will run the next-generation of the BLAST-TNG KIDPy software. With this instrument we aim to answer outstanding questions about dust dynamics as well as provide community access to the polarized submillimeter sky made possible by high-altitude observing unrestricted by atmospheric transmission. The BLAST Observatory is designed for a minimum 31-day flight of which 70$\%$ will be dedicated to observations for BLAST scientific goals and the remaining 30$\%$ will be open to proposals from the wider astronomical community through a shared-risk proposals program. △ Less

Submitted 2 December, 2020; originally announced December 2020.

Comments: Presented at SPIE Ground-based and Airborne Telescopes VIII, December 13-18, 2020

Characterization, deployment, and in-flight performance of the BLAST-TNG cryogenic receiver

Authors: Ian Lowe, Peter A. R. Ade, Peter C. Ashton, Jason E. Austermann, Gabriele Coppi, Erin G. Cox, Mark J. Devlin, Bradley J. Dober, Valentina Fanfani, Laura M. Fissel, Nicholas Galitzki, Jiansong Gao, Samuel Gordon, Christopher E. Groppi, Gene C. Hilton, Johannes Hubmayr, Jeffrey Klein, Dale Li, Nathan P. Lourie, Hamdi Mani, Philip Mauskopf, Christopher McKenney, Federico Nati, Giles Novak, Giampaolo Pisano , et al. (8 additional authors not shown)

Abstract: The Next Generation Balloon-borne Large Aperture Submillimeter Telescope (BLAST-TNG) is a submillimeter polarimeter designed to map interstellar dust and galactic foregrounds at 250, 350, and 500 microns during a 24-day Antarctic flight. The BLAST-TNG detector arrays are comprised of 918, 469, and 272 MKID pixels, respectively. The pixels are formed from two orthogonally oriented, crossed, linear-… ▽ More The Next Generation Balloon-borne Large Aperture Submillimeter Telescope (BLAST-TNG) is a submillimeter polarimeter designed to map interstellar dust and galactic foregrounds at 250, 350, and 500 microns during a 24-day Antarctic flight. The BLAST-TNG detector arrays are comprised of 918, 469, and 272 MKID pixels, respectively. The pixels are formed from two orthogonally oriented, crossed, linear-polarization sensitive MKID antennae. The arrays are cooled to sub 300mK temperatures and stabilized via a closed cycle $^3$He sorption fridge in combination with a $^4$He vacuum pot. The detectors are read out through a combination of the second-generation Reconfigurable Open Architecture Computing Hardware (ROACH2) and custom RF electronics designed for BLAST-TNG. The firmware and software designed to readout and characterize these detectors was built from scratch by the BLAST team around these detectors, and has been adapted for use by other MKID instruments such as TolTEC and OLIMPO. We present an overview of these systems as well as in-depth methodology of the ground-based characterization and the measured in-flight performance. △ Less

Submitted 12 January, 2021; v1 submitted 2 December, 2020; originally announced December 2020.

Comments: Presented at SPIE Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy X, December 13-18, 2020

Journal ref: Proc. SPIE 11453, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy X, 1145304 (13 December 2020)

In-flight performance of the BLAST-TNG telescope platform

Authors: Gabriele Coppi, Peter A. R. Ade, Peter C. Ashton, Jason E. Austermann, Erin G. Cox, Mark J. Devlin, Bradley J. Dober, Valentina Fanfani, Laura M. Fissel, Nicholas Galitzki, Jiansong Gao, Samuel Gordon, Christopher E. Groppi, Gene C. Hilton, Johannes Hubmayr, Jeffrey Klein, Dale Li, Nathan P. Lourie, Ian Lowe, Hamdi Mani, Philip Mauskopf, Christopher McKenney, Federico Nati, Giles Novak, Giampaolo Pisano , et al. (8 additional authors not shown)

Abstract: The Next Generation Balloon-Borne Large Aperture Submillimeter Telescope (BLAST-TNG) was a unique instrument for characterizing the polarized submillimeter sky at high-angular resolution. BLAST-TNG flew from the Long Duration Balloon Facility in Antarctica in January 2020. Despite the short flight duration, the instrument worked very well and is providing significant information about each subsyst… ▽ More The Next Generation Balloon-Borne Large Aperture Submillimeter Telescope (BLAST-TNG) was a unique instrument for characterizing the polarized submillimeter sky at high-angular resolution. BLAST-TNG flew from the Long Duration Balloon Facility in Antarctica in January 2020. Despite the short flight duration, the instrument worked very well and is providing significant information about each subsystem that will be invaluable for future balloon missions. In this contribution, we discuss the performance of telescope and gondola. △ Less

Submitted 2 January, 2021; v1 submitted 2 December, 2020; originally announced December 2020.

Comments: Submitted to SPIE Astronomical Telescopes + Instrumentation, Ground-based and Airborne Telescopes VIII

Journal ref: Proc. SPIE 11445, Ground-based and Airborne Telescopes VIII, 2020

Non-LTE inversions of a confined X2.2 flare: I. Vector magnetic field in the photosphere and chromosphere

Authors: G. J. M. Vissers, S. Danilovic, J. de la Cruz Rodriguez, J. Leenaarts, R. Morosin, C. J. Diaz Baso, A. Reid, J. Pomoell, D. J. Price, S. Inoue

Abstract: Obtaining the magnetic field vector accurately in the solar atmosphere is essential for studying changes in field topology during flares and to reliably model space weather. We tackle this problem by applying various inversion methods to a confined X2.2 flare in NOAA AR 12673 on September 6, 2017, comparing the photospheric and chromospheric magnetic field vector with those from two numerical mode… ▽ More Obtaining the magnetic field vector accurately in the solar atmosphere is essential for studying changes in field topology during flares and to reliably model space weather. We tackle this problem by applying various inversion methods to a confined X2.2 flare in NOAA AR 12673 on September 6, 2017, comparing the photospheric and chromospheric magnetic field vector with those from two numerical models of this event. We obtain the photospheric field from Milne-Eddington (ME) and (non-)local thermal equilibrium (non-LTE) inversions of Hinode SOT/SP Fe I 6301.5Å and 6302.5Å. The chromospheric field is obtained from a spatially-regularised weak field approximation (WFA) and non-LTE inversions of Ca II 8542Å observed with CRISP at the Swedish 1-m Solar Telescope. The LTE- and non-LTE-inferred photospheric field components are strongly correlated throughout the atmosphere, with stronger field and higher temperatures in the non-LTE inversions. For the chromospheric field, the non-LTE inversions correlate well with the spatially-regularised WFA. We find strong-field patches of over 4.5 kG in the photosphere, co-located with similar concentrations exceeding 3 kG in the chromosphere. The obtained field strengths are up to 2-3 times higher than in the numerical models, with more concentrated and structured photosphere-to-chromosphere shear close to the polarity inversion line. The LTE and non-LTE Fe I inversions yield essentially the same photospheric field, while ME inversions fail to reproduce the field vector orientation where Fe I is in emission. Our inversions confirm the locations of flux rope footpoints that are predicted by numerical models. However, pre-processing and lower spatial resolution lead to weaker and smoother field in the models than what the data indicate. This emphasises the need for higher spatial resolution in the models to better constrain pre-eruptive flux ropes. △ Less

Submitted 3 September, 2020; originally announced September 2020.

Comments: Submitted to Astronomy & Astrophysics. 16 pages, 8 figures

Journal ref: A&A 645, A1 (2021)

A three-wave mixing kinetic inductance traveling-wave amplifier with near-quantum-limited noise performance

Authors: M. Malnou, M. R. Vissers, J. D. Wheeler, J. Aumentado, J. Hubmayr, J. N. Ullom, J. Gao

Abstract: We present a theoretical model and experimental characterization of a microwave kinetic inductance traveling-wave amplifier (KIT), whose noise performance, measured by a shot-noise tunnel junction (SNTJ), approaches the quantum limit. Biased with a dc current, the KIT operates in a three-wave mixing fashion, thereby reducing by several orders of magnitude the power of the microwave pump tone and a… ▽ More We present a theoretical model and experimental characterization of a microwave kinetic inductance traveling-wave amplifier (KIT), whose noise performance, measured by a shot-noise tunnel junction (SNTJ), approaches the quantum limit. Biased with a dc current, the KIT operates in a three-wave mixing fashion, thereby reducing by several orders of magnitude the power of the microwave pump tone and associated parasitic heating compared to conventional four-wave mixing KIT devices. It consists of a 50 Ohms artificial transmission line whose dispersion allows for a controlled amplification bandwidth. We measure $16.5^{+1}_{-1.3}$ dB of gain across a 2 GHz bandwidth with an input 1 dB compression power of -63 dBm, in qualitative agreement with theory. Using a theoretical framework that accounts for the SNTJ-generated noise entering both the signal and idler ports of the KIT, we measure the system-added noise of an amplification chain that integrates the KIT as the first amplifier. This system-added noise, $3.1\pm0.6$ quanta (equivalent to $0.66\pm0.15$ K) between 3.5 and 5.5 GHz, is the one that a device replacing the SNTJ in that chain would see. This KIT is therefore suitable to read large arrays of microwave kinetic inductance detectors and promising for multiplexed superconducting qubit readout. △ Less

Submitted 2 November, 2020; v1 submitted 1 July, 2020; originally announced July 2020.

Journal ref: PRX Quantum 2, 010302 (2021)

ALMA observations of transient heating in a solar active region

Authors: J. M. da Silva Santos, J. de la Cruz Rodríguez, S. M. White, J. Leenaarts, G. J. M. Vissers, V. H. Hansteen

Abstract: We aim to investigate the temperature enhancements and formation heights of impulsive heating phenomena in solar active-regions such as Ellerman bombs (EBs), ultraviolet bursts (UVBs), and flaring active-region fibrils (FAFs) using interferometric observations in the millimeter (mm) continuum provided by the Atacama Large Millimeter/submillimeter Array (ALMA). We examined 3 mm signatures of heatin… ▽ More We aim to investigate the temperature enhancements and formation heights of impulsive heating phenomena in solar active-regions such as Ellerman bombs (EBs), ultraviolet bursts (UVBs), and flaring active-region fibrils (FAFs) using interferometric observations in the millimeter (mm) continuum provided by the Atacama Large Millimeter/submillimeter Array (ALMA). We examined 3 mm signatures of heating events identified in Solar Dynamics Observatory (SDO) observations of an active region and compared the results with synthetic spectra from a 3D radiative magnetohydrodynamic simulation. We estimated the contribution from the corona to the mm brightness using differential emission measure analysis. We report the null detection of EBs in the 3 mm continuum at $\sim1.2$" spatial resolution, which is evidence that they are sub-canopy events that do not significantly contribute to heating the upper chromosphere. In contrast, we find the active region to be populated with multiple compact, bright, flickering mm bursts -- reminiscent of UVBs. The high brightness temperatures of up to $\sim14200$ K in some events have a significant contribution (up to $\sim$7%) from the corona. We also detect FAF-like events in the 3 mm continuum that show rapid motions of $>10000\,$K plasma launched with high plane-of-sky velocities ($37-340\rm\,km\,s^{-1}$) from bright kernels. The mm FAFs are the brightest class of warm canopy fibrils that connect magnetic regions of opposite polarities. The simulation confirms that ALMA should be able to detect the mm counterparts of UVBs and small flares and thus provide a complementary diagnostic for localized heating in the solar chromosphere. △ Less

Submitted 1 September, 2020; v1 submitted 25 June, 2020; originally announced June 2020.

Comments: revised; accepted in Astronomy & Astrophysics

Journal ref: A&A 643, A41 (2020)

Stratification of canopy magnetic fields in a plage region. Constraints from a spatially-regularized weak-field approximation method

Authors: R. Morosin, J. de la Cruz Rodriguez, G. J. M. Vissers, R. Yadav

Abstract: The role of magnetic fields in the chromospheric heating problem remains greatly unconstrained. Most theoretical predictions from numerical models rely on a magnetic configuration, field strength and connectivity whose details have not been well established with observational studies. High-resolution studies of chromospheric magnetic fields in plage are very scarce or non-existent in general. Our… ▽ More The role of magnetic fields in the chromospheric heating problem remains greatly unconstrained. Most theoretical predictions from numerical models rely on a magnetic configuration, field strength and connectivity whose details have not been well established with observational studies. High-resolution studies of chromospheric magnetic fields in plage are very scarce or non-existent in general. Our aim is to study the stratification of the magnetic field vector in plage regions. We use high-spatial resolution full-Stokes observations acquired with CRISP instrument at the Swedish 1-m Solar Telescope in the Mg I $λ$5173, Na I $λ$5896 and Ca II $λ$8542 lines. We have developed a spatially-regularized weak-field approximation (WFA) method based on the idea of spatial regularization. This method allows for a fast computation of magnetic field maps for an extended field of view. The fidelity of this new technique has been assessed using a snapshot from a realistic 3D magnetohydrodynamics simulation. We have derived the depth-stratification of the line-of-sight component of the magnetic field from the photosphere to the chromosphere in a plage region. The magnetic fields are concentrated in the intergranular lanes in the photosphere and expand horizontally toward the chromosphere, filling all the space and forming a canopy. Our results suggest that the lower boundary of this canopy must be located around 400-600 km from the photosphere. The mean canopy total magnetic field strength in the lower chromosphere ($z\approx760$ km) is 658 G. At $z=1160$ km we estimate $<B_\parallel>\approx 417$ G. We propose a modification to the WFA that improves its applicability to data with worse signal-to-noise ratio. These methods provide a quick and reliable way of studying multi-layer magnetic field observations without the many difficulties inherent to other inversion methods. △ Less

Submitted 1 September, 2020; v1 submitted 25 June, 2020; originally announced June 2020.

Comments: Accepted for publication on 2020-08-27

Journal ref: A&A 642, A210 (2020)

High-resolution observations of the solar photosphere, chromosphere and transition region. A database of coordinated IRIS and SST observations

Authors: L. H. M. Rouppe van der Voort, B. De Pontieu, M. Carlsson, J. de la Cruz Rodriguez, S. Bose, G. Chintzoglou, A. Drews, C. Froment, M. Gosic, D. R. Graham, V. H. Hansteen, V. M. J. Henriques, S. Jafarzadeh, J. Joshi, L. Kleint, P. Kohutova, T. Leifsen, J. Martinez-Sykora, D. Nobrega-Siverio, A. Ortiz, T. M. D. Pereira, A. Popovas, C. Quintero Noda, A. Sainz Dalda, G. B. Scharmer , et al. (8 additional authors not shown)

Abstract: NASA's Interface Region Imaging Spectrograph (IRIS) provides high resolution observations of the solar atmosphere through UV spectroscopy and imaging. Since the launch of IRIS in June 2013, we have conducted systematic observation campaigns in coordination with the Swedish 1-m Solar Telescope (SST) on La Palma. The SST provides complementary high-resolution observations of the photosphere and chro… ▽ More NASA's Interface Region Imaging Spectrograph (IRIS) provides high resolution observations of the solar atmosphere through UV spectroscopy and imaging. Since the launch of IRIS in June 2013, we have conducted systematic observation campaigns in coordination with the Swedish 1-m Solar Telescope (SST) on La Palma. The SST provides complementary high-resolution observations of the photosphere and chromosphere. The SST observations include spectro-polarimetric imaging in photospheric Fe I lines and spectrally-resolved imaging in the chromospheric Ca II 8542 A, H-alpha, and Ca II K lines. We present a database of co-aligned IRIS and SST datasets that is open for analysis to the scientific community. The database covers a variety of targets including active regions, sunspots, plage, quiet Sun, and coronal holes. △ Less

Submitted 29 July, 2020; v1 submitted 28 May, 2020; originally announced May 2020.

Comments: Accepted for publication in Astronomy & Astrophysics (July 21, 2020)

Journal ref: A&A 641, A146 (2020)

Updated design of the CMB polarization experiment satellite LiteBIRD

Authors: H. Sugai, P. A. R. Ade, Y. Akiba, D. Alonso, K. Arnold, J. Aumont, J. Austermann, C. Baccigalupi, A. J. Banday, R. Banerji, R. B. Barreiro, S. Basak, J. Beall, S. Beckman, M. Bersanelli, J. Borrill, F. Boulanger, M. L. Brown, M. Bucher, A. Buzzelli, E. Calabrese, F. J. Casas, A. Challinor, V. Chan, Y. Chinone , et al. (196 additional authors not shown)

Abstract: Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will ac… ▽ More Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will accommodate more than 4000 TESs in focal planes of reflective low-frequency and refractive medium-and-high-frequency telescopes in order to detect a signature imprinted on the cosmic microwave background (CMB) by the primordial gravitational waves predicted in cosmic inflation. The total wide frequency coverage between 34GHz and 448GHz enables us to extract such weak spiral polarization patterns through the precise subtraction of our Galaxy's foreground emission by using spectral differences among CMB and foreground signals. Telescopes are cooled down to 5Kelvin for suppressing thermal noise and contain polarization modulators with transmissive half-wave plates at individual apertures for separating sky polarization signals from artificial polarization and for mitigating from instrumental 1/f noise. Passive cooling by using V-grooves supports active cooling with mechanical coolers as well as adiabatic demagnetization refrigerators. Sky observations from the second Sun-Earth Lagrangian point, L2, are planned for three years. An international collaboration between Japan, USA, Canada, and Europe is sharing various roles. In May 2019, the Institute of Space and Astronautical Science (ISAS), JAXA selected LiteBIRD as the strategic large mission No. 2. △ Less

Submitted 6 January, 2020; originally announced January 2020.

Comments: Journal of Low Temperature Physics, in press

Journal ref: Journal of Low Temperature Physics 199, 1107 (2020)

Characterization of aliased noise in the Advanced ACTPol receiver

Authors: Patricio A. Gallardo, Michael D. Niemack, Jason E. Austermann, James A. Beall, Nick F. Cothard, Cody J. Duell, Shannon M. Duff, Shawn W. Henderson, Gene C. Hilton, Shuay-Pwu Patty Ho, Johannes Hubmayr, Carl D. Reintsema, Maria Salatino, Joel Ullom, Jeff Van Lanen, Michael Vissers, Edward J. Wollack

Abstract: Advanced ACTPol is the second generation polarization-sensitive upgrade to the $6\, \rm m$ aperture Atacama Cosmology Telescope (ACT), which increased detector count and frequency coverage compared to the previous ACTPol receiver. Advanced ACTPol utilizes a new two-stage time-division multiplexing readout architecture based on superconducting quantum interference devices (SQUIDs) to achieve a mult… ▽ More Advanced ACTPol is the second generation polarization-sensitive upgrade to the $6\, \rm m$ aperture Atacama Cosmology Telescope (ACT), which increased detector count and frequency coverage compared to the previous ACTPol receiver. Advanced ACTPol utilizes a new two-stage time-division multiplexing readout architecture based on superconducting quantum interference devices (SQUIDs) to achieve a multiplexing factor as high as 64 (rows), fielding a 2,012 detector camera at 150/220 GHz and two 90/150 GHz cameras containing 1,716 detectors each. In a time domain system, aliasing introduces noise to the readout. In this work we present a figure of merit to measure this noise contribution and present measurements of the aliased noise fraction of the Advanced ACTPol receiver as deployed. △ Less

Submitted 5 December, 2019; originally announced December 2019.

Characterization of Transition Edge Sensors for the Simons Observatory

Authors: Jason R. Stevens, Nicholas F. Cothard, Eve M. Vavagiakis, Aamir Ali, Kam Arnold, Jason E. Austermann, Steve K. Choi, Bradley J. Dober, Cody Duell, Shannon M. Duff, Gene C. Hilton, Shuay-Pwu Patty Ho, Thuong D. Hoang, Johannes Hubmayr, Adrian T. Lee, Aashrita Mangu, Federico Nati, Michael D. Niemack, Christopher Raum, Mario Renzullo, Maria Salatino, Trevor Sasse, Sara M. Simon, Suzanne Staggs, Aritoki Suzuki , et al. (9 additional authors not shown)

Abstract: The Simons Observatory is building both large (6 m) and small (0.5 m) aperture telescopes in the Atacama desert in Chile to observe the cosmic microwave background (CMB) radiation with unprecedented sensitivity. Simons Observatory telescopes in total will use over 60,000 transition edge sensor (TES) detectors spanning center frequencies between 27 and 285 GHz and operating near 100 mK. TES devices… ▽ More The Simons Observatory is building both large (6 m) and small (0.5 m) aperture telescopes in the Atacama desert in Chile to observe the cosmic microwave background (CMB) radiation with unprecedented sensitivity. Simons Observatory telescopes in total will use over 60,000 transition edge sensor (TES) detectors spanning center frequencies between 27 and 285 GHz and operating near 100 mK. TES devices have been fabricated for the Simons Observatory by NIST, Berkeley, and HYPRES/SeeQC corporation. Iterations of these devices have been tested cryogenically in order to inform the fabrication of further devices, which will culminate in the final TES designs to be deployed in the field. The detailed design specifications have been independently iterated at each fabrication facility for particular detector frequencies. We present test results for prototype devices, with emphasis on NIST high frequency detectors. A dilution refrigerator was used to achieve the required temperatures. Measurements were made both with 4-lead resistance measurements and with a time domain Superconducting Quantum Interference Device (SQUID) multiplexer system. The SQUID readout measurements include analysis of current vs voltage (IV) curves at various temperatures, square wave bias step measurements, and detector noise measurements. Normal resistance, superconducting critical temperature, saturation power, thermal and natural time constants, and thermal properties of the devices are extracted from these measurements. △ Less

Submitted 21 January, 2020; v1 submitted 2 December, 2019; originally announced December 2019.

Comments: 9 Pages, 5 figures, Low Temperature Detectors 19

Demonstration of 220/280 GHz Multichroic Feedhorn-Coupled TES Polarimeter

Authors: Samantha Walker, Carlos E. Sierra, Jason E. Austermann, James A. Beall, Daniel T. Becker, Bradley J. Dober, Shannon M. Duff, Gene C. Hilton, Johannes Hubmayr, Jeffrey L. Van Lanen, Jeffrey J. McMahon, Sara M. Simon, Joel N. Ullom, Michael R. Vissers

Abstract: We describe the design and measurement of feedhorn-coupled, transition-edge sensor (TES) polarimeters with two passbands centered at 220 GHz and 280 GHz, intended for observations of the cosmic microwave background. Each pixel couples polarized light in two linear polarizations by use of a planar orthomode transducer and senses power via four TES bolometers, one for each band in each linear polari… ▽ More We describe the design and measurement of feedhorn-coupled, transition-edge sensor (TES) polarimeters with two passbands centered at 220 GHz and 280 GHz, intended for observations of the cosmic microwave background. Each pixel couples polarized light in two linear polarizations by use of a planar orthomode transducer and senses power via four TES bolometers, one for each band in each linear polarization. Previous designs of this detector architecture incorporated passbands from 27 GHz to 220 GHz; we now demonstrate this technology at frequencies up to 315 GHz. Observational passbands are defined with an on-chip diplexer, and Fourier-transform-spectrometer measurements are in excellent agreement with simulations. We find coupling from feedhorn to TES bolometer using a cryogenic, temperature-controlled thermal source. We determine the optical efficiency of our device is $η$ = 77%$\pm$6% (75%$\pm$5%) for 220 (280) GHz, relative to the designed passband shapes. Lastly, we compare two power-termination schemes commonly used in wide-bandwidth millimeter-wave polarimeters and find equal performance in terms of optical efficiency and passband shape. △ Less

Submitted 26 December, 2019; v1 submitted 25 September, 2019; originally announced September 2019.

Comments: Proceedings for the 18th International Workshop on Low Temperature Detectors (LTD18), submitted to the Journal of Low Temperature Physics

The CCAT-Prime Submillimeter Observatory

Authors: Manuel Aravena, Jason Austermann, Kaustuv Basu, Nicholas Battaglia, Benjamin Beringue, Frank Bertoldi, J. Richard Bond, Patrick Breysse, Ricardo Bustos, Scott Chapman, Steve Choi, Dongwoo Chung, Nicholas Cothard, Bradley Dober, Cody Duell, Shannon Duff, Rolando Dunner, Jens Erler, Michel Fich, Laura Fissel, Simon Foreman, Patricio Gallardo, Jiansong Gao, Riccardo Giovanelli, Urs Graf , et al. (31 additional authors not shown)

Abstract: The Cerro Chajnantor Atacama Telescope-prime (CCAT-prime) is a new 6-m, off-axis, low-emissivity, large field-of-view submillimeter telescope scheduled for first light in the last quarter of 2021. In summary, (a) CCAT-prime uniquely combines a large field-of-view (up to 8-deg), low emissivity telescope (< 2%) and excellent atmospheric transmission (5600-m site) to achieve unprecedented survey capa… ▽ More The Cerro Chajnantor Atacama Telescope-prime (CCAT-prime) is a new 6-m, off-axis, low-emissivity, large field-of-view submillimeter telescope scheduled for first light in the last quarter of 2021. In summary, (a) CCAT-prime uniquely combines a large field-of-view (up to 8-deg), low emissivity telescope (< 2%) and excellent atmospheric transmission (5600-m site) to achieve unprecedented survey capability in the submillimeter. (b) Over five years, CCAT-prime first generation science will address the physics of star formation, galaxy evolution, and galaxy cluster formation; probe the re-ionization of the Universe; improve constraints on new particle species; and provide for improved removal of dust foregrounds to aid the search for primordial gravitational waves. (c) The Observatory is being built with non-federal funds (~ \$40M in private and international investments). Public funding is needed for instrumentation (~ \$8M) and operations (\$1-2M/yr). In return, the community will be able to participate in survey planning and gain access to curated data sets. (d) For second generation science, CCAT-prime will be uniquely positioned to contribute high-frequency capabilities to the next generation of CMB surveys in partnership with the CMB-S4 and/or the Simons Observatory projects or revolutionize wide-field, sub-millimetter line intensity map** surveys. △ Less

Submitted 5 September, 2019; originally announced September 2019.

Comments: Astro2020 APC White Paper

Sensitivity of the Prime-Cam Instrument on the CCAT-prime Telescope

Authors: Steve K. Choi, Jason Austermann, Kaustuv Basu, Nicholas Battaglia, Frank Bertoldi, Dongwoo T. Chung, Nicholas F. Cothard, Shannon Duff, Cody J. Duell, Patricio A. Gallardo, Jiansong Gao, Terry Herter, Johannes Hubmayr, Michael D. Niemack, Thomas Nikola, Dominik Riechers, Kayla Rossi, Gordon J. Stacey, Jason R. Stevens, Eve M. Vavagiakis, Michael Vissers, Samantha Walker

Abstract: CCAT-prime is a new 6 m crossed Dragone telescope designed to characterize the Cosmic Microwave Background (CMB) polarization and foregrounds, measure the Sunyaev-Zel'dovich effects of galaxy clusters, map the [CII] emission intensity from the Epoch of Reionization (EoR), and monitor accretion luminosity over multi-year timescales of hundreds of protostars in the Milky Way. CCAT-prime will make ob… ▽ More CCAT-prime is a new 6 m crossed Dragone telescope designed to characterize the Cosmic Microwave Background (CMB) polarization and foregrounds, measure the Sunyaev-Zel'dovich effects of galaxy clusters, map the [CII] emission intensity from the Epoch of Reionization (EoR), and monitor accretion luminosity over multi-year timescales of hundreds of protostars in the Milky Way. CCAT-prime will make observations from a 5,600 m altitude site on Cerro Chajnantor in the Atacama Desert of northern Chile. The novel optical design of the telescope combined with high surface accuracy ($<$10 $μ$m) mirrors and the exceptional atmospheric conditions of the site will enable sensitive broadband, polarimetric, and spectroscopic surveys at sub-mm to mm wavelengths. Prime-Cam, the first light instrument for CCAT-prime, consists of a 1.8 m diameter cryostat that can house seven individual instrument modules. Each instrument module, optimized for a specific science goal, will use state-of-the-art kinetic inductance detector (KID) arrays operated at $\sim$100 mK, and Fabry-Perot interferometers (FPI) for the EoR science. Prime-Cam will be commissioned with staged deployments to populate the seven instrument modules. The full instrument will consist of 60,000 polarimetric KIDs at a combination of 220/280/350/410 GHz, 31,000 KIDS at 250/360 GHz coupled with FPIs, and 21,000 polarimetric KIDs at 850 GHz. Prime-Cam is currently being built, and the CCAT-prime telescope is designed and under construction by Vertex Antennentechnik GmbH to achieve first light in 2021. CCAT-prime is also a potential telescope platform for the future CMB Stage-IV observations. △ Less

Submitted 31 March, 2020; v1 submitted 27 August, 2019; originally announced August 2019.

Comments: Version accepted for publication by Journal of Low Temperature Physics; updates on FPI detectors, more details given on sensitivity calculations

The Simons Observatory: Astro2020 Decadal Project Whitepaper

Authors: The Simons Observatory Collaboration, Maximilian H. Abitbol, Shunsuke Adachi, Peter Ade, James Aguirre, Zeeshan Ahmed, Simone Aiola, Aamir Ali, David Alonso, Marcelo A. Alvarez, Kam Arnold, Peter Ashton, Zachary Atkins, Jason Austermann, Humna Awan, Carlo Baccigalupi, Taylor Baildon, Anton Baleato Lizancos, Darcy Barron, Nick Battaglia, Richard Battye, Eric Baxter, Andrew Bazarko, James A. Beall, Rachel Bean , et al. (258 additional authors not shown)

Abstract: The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) experiment sited on Cerro Toco in the Atacama Desert in Chile that promises to provide breakthrough discoveries in fundamental physics, cosmology, and astrophysics. Supported by the Simons Foundation, the Heising-Simons Foundation, and with contributions from collaborating institutions, SO will see first light in 2021… ▽ More The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) experiment sited on Cerro Toco in the Atacama Desert in Chile that promises to provide breakthrough discoveries in fundamental physics, cosmology, and astrophysics. Supported by the Simons Foundation, the Heising-Simons Foundation, and with contributions from collaborating institutions, SO will see first light in 2021 and start a five year survey in 2022. SO has 287 collaborators from 12 countries and 53 institutions, including 85 students and 90 postdocs. The SO experiment in its currently funded form ('SO-Nominal') consists of three 0.4 m Small Aperture Telescopes (SATs) and one 6 m Large Aperture Telescope (LAT). Optimized for minimizing systematic errors in polarization measurements at large angular scales, the SATs will perform a deep, degree-scale survey of 10% of the sky to search for the signature of primordial gravitational waves. The LAT will survey 40% of the sky with arc-minute resolution. These observations will measure (or limit) the sum of neutrino masses, search for light relics, measure the early behavior of Dark Energy, and refine our understanding of the intergalactic medium, clusters and the role of feedback in galaxy formation. With up to ten times the sensitivity and five times the angular resolution of the Planck satellite, and roughly an order of magnitude increase in map** speed over currently operating ("Stage 3") experiments, SO will measure the CMB temperature and polarization fluctuations to exquisite precision in six frequency bands from 27 to 280 GHz. SO will rapidly advance CMB science while informing the design of future observatories such as CMB-S4. △ Less

Submitted 16 July, 2019; originally announced July 2019.

Comments: Astro2020 Decadal Project Whitepaper. arXiv admin note: text overlap with arXiv:1808.07445

Journal ref: Bull. Am. Astron. Soc. 51 (2019) 147

Dissecting bombs and bursts: non-LTE inversions of low-atmosphere reconnection in SST and IRIS observations

Authors: G. J. M. Vissers, J. de la Cruz Rodriguez, T. Libbrecht, L. H. M. Rouppe van der Voort, G. B. Scharmer, M. Carlsson

Abstract: Ellerman bombs and UV bursts are transient brightenings that are ubiquitously observed in the lower atmospheres of active and emerging flux regions. Here we present inversion results of SST/CRISP and CHROMIS, as well as IRIS data of such transient events. Combining information from the Mg II h & k, Si IV and Ca II 8542A and Ca II H & K lines, we aim to characterise their temperature and velocity s… ▽ More Ellerman bombs and UV bursts are transient brightenings that are ubiquitously observed in the lower atmospheres of active and emerging flux regions. Here we present inversion results of SST/CRISP and CHROMIS, as well as IRIS data of such transient events. Combining information from the Mg II h & k, Si IV and Ca II 8542A and Ca II H & K lines, we aim to characterise their temperature and velocity stratification, as well as their magnetic field configuration. We find average temperature enhancements of a few thousand kelvin close to the classical temperature minimum, but localised peak temperatures of up to 10,000-15,000 K from Ca II inversions. Including Mg II generally dampens these temperature enhancements to below 8000 K, while Si IV requires temperatures in excess of 10,000 K at low heights, but may also be reproduced with secondary temperature enhancements of 35,000-60,000 K higher up. However, reproducing Si IV comes at the expense of overestimating the Mg II emission. The line-of-sight velocity maps show clear bi-directional jet signatures and strong correlation with substructure in the intensity images, with slightly larger velocities towards the observer than away. The magnetic field parameters show an enhancement of the horizontal field co-located with the brightenings at similar heights as the temperature increase. We are thus able to largely reproduce the observational properties of Ellerman bombs with UV burst signature with temperature stratifications peaking close to the classical temperature minimum. Correctly modelling the Si IV emission in agreement with all other diagnostics is, however, an outstanding issue. Accounting for resolution differences, fitting localised temperature enhancements and/or performing spatially-coupled inversions is likely necessary to obtain better agreement between all considered diagnostics. △ Less

Submitted 6 May, 2019; originally announced May 2019.

Comments: Accepted for publication in Astronomy & Astrophysics. 24 pages, 17 figures

Journal ref: A&A 627, A101 (2019)

Automating Ellerman bomb detection in ultraviolet continua

Authors: Gregal J. M. Vissers, Luc H. M. Rouppe van der Voort, Robert J. Rutten

Abstract: Ellerman bombs are transient brightenings in the wings of H-alpha 6563 Å that pinpoint photospheric sites of magnetic reconnection in solar active regions. Their partial visibility in the 1600 Å and 1700 Å continua registered routinely by the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO) offers a unique opportunity to inventory such magnetic-field disruptions thro… ▽ More Ellerman bombs are transient brightenings in the wings of H-alpha 6563 Å that pinpoint photospheric sites of magnetic reconnection in solar active regions. Their partial visibility in the 1600 Å and 1700 Å continua registered routinely by the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO) offers a unique opportunity to inventory such magnetic-field disruptions throughout the AIA database if a reliable recipe for their detection can be formulated. This is done here. We improve and apply an H-alpha Ellerman bomb detection code to ten data sets spanning viewing angles from solar disc centre to the limb. They combine high-quality H-alpha imaging spectroscopy from the Swedish 1-m Solar Telescope with simultaneous AIA imaging around 1600 Å and 1700 Å. A trial grid of brightness, lifetime and area constraints is imposed on the AIA images to define optimal recovery of the 1735 Ellerman bombs detected in H-alpha. The best results when optimising simultaneously for recovery fraction and reliability are obtained from 1700 Å images by requiring 5-sigma brightening above the average 1700 Å nearby quiet-Sun intensity, lifetime above one minute, area of 1-18 AIA pixels. With this recipe 27% of the AIA detections are H-alpha-detected Ellerman bombs while it recovers 19% of these (of which many are smaller than the AIA resolution). Better yet, among the top 10% AIA 1700 Å detections selected with combined brightness, lifetime and area thresholds as many as 80% are H-alpha Ellerman bombs. Automated selection of the best 1700 Å candidates therefore opens the entire AIA database for detecting most of the more significant photospheric reconnection events. This proxy is applicable as flux-dynamics tell-tale in studying any Earth-side solar active region since early 2010 up to the present. △ Less

Submitted 23 January, 2019; originally announced January 2019.

Comments: Accepted for publication in Astronomy & Astrophysics. 16 pages, 11 figures

Journal ref: A&A 626, A4 (2019)

Highly-multiplexed microwave SQUID readout using the SLAC Microresonator Radio Frequency (SMuRF) Electronics for Future CMB and Sub-millimeter Surveys

Authors: Shawn W. Henderson, Zeeshan Ahmed, Jason Austermann, Daniel Becker, Douglas A. Bennett, David Brown, Saptarshi Chaudhuri, Hsiao-Mei Sherry Cho, John M. D'Ewart, Bradley Dober, Shannon M. Duff, John E. Dusatko, Sofia Fatigoni, Josef C. Frisch, Jonathon D. Gard, Mark Halpern, Gene C. Hilton, Johannes Hubmayr, Kent D. Irwin, Ethan D. Karpel, Sarah S. Kernasovskiy, Stephen E. Kuenstner, Chao-Lin Kuo, Dale Li, John A. B. Mates , et al. (7 additional authors not shown)

Abstract: The next generation of cryogenic CMB and submillimeter cameras under development require densely instrumented sensor arrays to meet their science goals. The readout of large numbers ($\sim$10,000--100,000 per camera) of sub-Kelvin sensors, for instance as proposed for the CMB-S4 experiment, will require substantial improvements in cold and warm readout techniques. To reduce the readout cost per se… ▽ More The next generation of cryogenic CMB and submillimeter cameras under development require densely instrumented sensor arrays to meet their science goals. The readout of large numbers ($\sim$10,000--100,000 per camera) of sub-Kelvin sensors, for instance as proposed for the CMB-S4 experiment, will require substantial improvements in cold and warm readout techniques. To reduce the readout cost per sensor and integration complexity, efforts are presently focused on achieving higher multiplexing density while maintaining readout noise subdominant to intrinsic detector noise. Highly-multiplexed cold readout technologies in active development include Microwave Kinetic Inductance Sensors (MKIDs) and microwave rf-SQUIDs. Both exploit the high quality factors of superconducting microwave resonators to densely channelize sub-Kelvin sensors into the bandwidth of a microwave transmission line. We present advancements in the development of a new warm readout system for microwave SQUID multiplexing, the SLAC Superconducting Microresonator RF electronics, or SMuRF. The SMuRF system is unique in its ability to track each tone, minimizing the total RF power required to read out each resonator, thereby significantly reducing the linearity requirements on the cold and warm readout. Here, we present measurements of the readout noise and linearity of the first full SMuRF system, including a demonstration of closed-loop tone tracking on a 528 channel cryogenic microwave SQUID multiplexer. SMuRF is being explored as a potential readout solution for several future CMB projects including Simons Observatory, BICEP Array, CCAT-prime, Ali-CPT, and CMB-S4. Parallel development of the platform is underway to adapt SMuRF to read out both MKID and fast X-ray TES calorimeter arrays. △ Less

Submitted 11 September, 2018; originally announced September 2018.

Comments: 16 pages, 5 figures

Journal ref: Proc. SPIE 10708, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX, 1070819 (18 July 2018)