-
The low energy spectrum of TeO2 bolometers: results and dark matter perspectives for the CUORE-0 and CUORE experiments
Authors:
F. Alessandria,
R. Ardito,
D. R. Artusa,
F. T. Avignone III,
O. Azzolini,
M. Balata,
T. I. Banks,
G. Bari,
J. Beeman,
F. Bellini,
A. Bersani,
M. Biassoni,
T. Bloxham,
C. Brofferio,
C. Bucci,
X. Z. Cai,
L. Canonica,
S. Capelli,
L. Carbone,
L. Cardani,
M. Carrettoni,
N. Casali,
N. Chott,
M. Clemenza,
C. Cosmelli
, et al. (91 additional authors not shown)
Abstract:
We collected 19.4 days of data from four 750 g TeO2 bolometers, and in three of them we were able to set the energy threshold around 3 keV using a new analysis technique. We found a background rate ranging from 25 cpd/keV/kg at 3 keV to 2 cpd/keV/kg at 25 keV, and a peak at 4.7 keV. The origin of this peak is presently unknown, but its presence is confirmed by a reanalysis of 62.7 kg.days of data…
▽ More
We collected 19.4 days of data from four 750 g TeO2 bolometers, and in three of them we were able to set the energy threshold around 3 keV using a new analysis technique. We found a background rate ranging from 25 cpd/keV/kg at 3 keV to 2 cpd/keV/kg at 25 keV, and a peak at 4.7 keV. The origin of this peak is presently unknown, but its presence is confirmed by a reanalysis of 62.7 kg.days of data from the finished CUORICINO experiment. Finally, we report the expected sensitivities of the CUORE0 (52 bolometers) and CUORE (988 bolometers) experiments to a WIMP annual modulation signal.
△ Less
Submitted 1 February, 2013; v1 submitted 12 September, 2012;
originally announced September 2012.
-
The complex behaviour of the microquasar GRS 1915+105 in the rho class observed with BeppoSAX. II: Time-resolved spectral analysis
Authors:
T. Mineo,
E. Massaro,
A. D'Ai,
F. Massa,
M. Feroci,
G. Ventura,
P. Casella,
C. Ferrigno,
T. Belloni
Abstract:
BeppoSAX observed GRS 1915+105 on October 2000 with a long pointing lasting about ten days. During this observation, the source was mainly in the rho class characterized by bursts with a recurrence time of between 40 and 100 s. We identify five segments in the burst structure and accumulate the average spectra of these segments during each satellite orbit. We present a detailed spectral analysis a…
▽ More
BeppoSAX observed GRS 1915+105 on October 2000 with a long pointing lasting about ten days. During this observation, the source was mainly in the rho class characterized by bursts with a recurrence time of between 40 and 100 s. We identify five segments in the burst structure and accumulate the average spectra of these segments during each satellite orbit. We present a detailed spectral analysis aimed at determining variations that occur during the burst and understanding the physical process that produces them. We compare MECS, HPGSPC, and PDS spectra with several models. Under the assumption that a single model is able to fit all spectra, we find that the combination of a multi-temperature black-body disk and a hybrid corona is able to give a consistent physical explanation of the source behaviour. Our measured variations in KT_el, tau, KT_in, and R_in appear to be either correlated or anti-correlated with the count rate in the energy range 1.6-10 keV. The strongest variations are detected along the burst segments: almost all parameters exhibit significant variations in the segments that have the highest fluxes (pulse) with the exception of R_in, which varies continuously and reaches a maximum just before the peak. The flux of the multi-temperature disk strongly increases in the pulse and simultaneously the corona contribution is significantly reduced. The disk luminosity increases in the pulse and the R_in-T_in correlation can be most successfully interpreted in term of the slim disk model. In addition, the reduction in the corona luminosity at the bursts might represent the condensation of the corona onto the disk.
△ Less
Submitted 17 November, 2011; v1 submitted 24 October, 2011;
originally announced October 2011.
-
The complex behaviour of the microquasar GRS 1915+105 in the rho class observed with BeppoSAX. I: Timing analysis
Authors:
E. Massaro,
G. Ventura,
F. Massa,
M. Feroci,
T. Mineo,
G. Cusumano,
P. Casella,
T. Belloni
Abstract:
GRS 1915+105 was observed by BeppoSAX for about 10 days in October 2000. For about 80% of the time, the source was in the variability class $ρ$, characterised by a series of recurrent bursts. We describe the results of the timing analysis performed on the MECS (1.6--10 keV) and PDS (15--100 keV) data. The X-ray count rate from \grss showed an increasing trend with different characteristics in th…
▽ More
GRS 1915+105 was observed by BeppoSAX for about 10 days in October 2000. For about 80% of the time, the source was in the variability class $ρ$, characterised by a series of recurrent bursts. We describe the results of the timing analysis performed on the MECS (1.6--10 keV) and PDS (15--100 keV) data. The X-ray count rate from \grss showed an increasing trend with different characteristics in the various energy bands. Fourier and wavelet analyses detect a variation in the recurrence time of the bursts, from 45--50 s to about 75 s, which appear well correlated with the count rate. From the power distribution of peaks in Fourier periodograms and wavelet spectra, we distinguished between the {\it regular} and {\it irregular} variability modes of the $ρ$ class, which are related to variations in the count rate in the 3--10 keV range. We identified two components in the burst structure: the slow leading trail, and the pulse, superimposed on a rather stable level. We found that the change in the recurrence time of the regular mode is caused by the slow leading trails, while the duration of the pulse phase remains far more stable. The evolution in the mean count rates shows that the time behaviour of both the leading trail and the baseline level are very similar to those observed in the 1.6--3 and 15--100 keV ranges, while that of the pulse follows the peak number. These differences in the time behaviour and count rates at different energies indicate that the process responsible for the pulses must produce the strongest emission between 3 and 10 keV, while that associated with both the leading trail and the baseline dominates at lower and higher energies
△ Less
Submitted 25 January, 2010;
originally announced January 2010.
-
A focal plane detector design for a wide-band Laue-lens telescope
Authors:
Ezio Caroli,
Natalia Auricchio,
Lorenzo Amati,
Yuriy Bezsmolnyy,
Carl Budtz-Jorgensen,
Rui M. Curado da Silva,
Filippo Frontera,
Alessandro Pisa,
Stefano Del Sordo,
John B. Stephen,
Giulio Ventura
Abstract:
The energy range above 60 keV is important for the study of many open problems in high energy astrophysics such as the role of Inverse Compton with respect to synchrotron or thermal processes in GRBs, non thermal mechanisms in SNR, the study of the high energy cut-offs in AGN spectra, and the detection of nuclear and annihilation lines. Recently the development of high energy Laue lenses with br…
▽ More
The energy range above 60 keV is important for the study of many open problems in high energy astrophysics such as the role of Inverse Compton with respect to synchrotron or thermal processes in GRBs, non thermal mechanisms in SNR, the study of the high energy cut-offs in AGN spectra, and the detection of nuclear and annihilation lines. Recently the development of high energy Laue lenses with broad energy bandpasses from 60 to 600 keV have been proposed for a Hard X ray focusing Telescope (HAXTEL) in order to study the X-ray continuum of celestial sources. The required focal plane detector should have high detection efficiency over the entire operative range, a spatial resolution of about 1 mm, an energy resolution of a few keV at 500 keV and a sensitivity to linear polarization. We describe a possible configuration of the focal plane detector based on several CdTe/CZT pixelated layers stacked together to achieve the required detection efficiency at high energy. Each layer can operate both as a separate position sensitive detector and polarimeter or work with other layers to increase the overall photopeak efficiency. Each layer has a hexagonal shape in order to minimize the detector surface required to cover the lens field of view. The pixels would have the same geometry so as to provide the best coupling with the lens point spread function and to increase the symmetry for polarimetric studies.
△ Less
Submitted 19 May, 2006;
originally announced May 2006.
-
The gamma-ray burst monitor for Lobster-ISS
Authors:
L. Amati,
F. Frontera,
N. Auricchio,
E. Caroli,
A. Basili,
A. Bogliolo,
G. Di Domenico,
T. Franceschini,
C. Guidorzi,
G. Landini,
N. Masetti,
E. Montanari,
M. Orlandini,
E. Palazzi,
S. Silvestri,
J. B. Stephen,
G. Ventura
Abstract:
Lobster-ISS is an X-ray all-sky monitor experiment selected by ESA two years ago for a Phase A study (now almost completed) for a future flight (2009) aboard the Columbus Exposed Payload Facility of the International Space Station. The main instrument, based on MCP optics with Lobster-eye geometry, has an energy passband from 0.1 to 3.5 keV, an unprecedented daily sensitivity of 2x10^{-12} erg c…
▽ More
Lobster-ISS is an X-ray all-sky monitor experiment selected by ESA two years ago for a Phase A study (now almost completed) for a future flight (2009) aboard the Columbus Exposed Payload Facility of the International Space Station. The main instrument, based on MCP optics with Lobster-eye geometry, has an energy passband from 0.1 to 3.5 keV, an unprecedented daily sensitivity of 2x10^{-12} erg cm^{-2}s$^{-1}, and it is capable to scan, during each orbit, the entire sky with an angular resolution of 4--6 arcmin. This X-ray telescope is flanked by a Gamma Ray Burst Monitor, with the minimum requirement of recognizing true GRBs from other transient events. In this paper we describe the GRBM. In addition to the minimum requirement, the instrument proposed is capable to roughly localize GRBs which occur in the Lobster FOV (162x22.5 degrees) and to significantly extend the scientific capabilities of the main instrument for the study of GRBs and X-ray transients. The combination of the two instruments will allow an unprecedented spectral coverage (from 0.1 up to 300/700 keV) for a sensitive study of the GRB prompt emission in the passband where GRBs and X-Ray Flashes emit most of their energy. The low-energy spectral band (0.1-10 keV) is of key importance for the study of the GRB environment and the search of transient absorption and emission features from GRBs, both goals being crucial for unveiling the GRB phenomenon. The entire energy band of Lobster-ISS is not covered by either the Swift satellite or other GRB missions foreseen in the next decade.
△ Less
Submitted 11 May, 2006;
originally announced May 2006.
-
Slow and fast components in the X-ray light curves of Gamma-Ray Bursts
Authors:
L. Vetere,
E. Massaro,
E. Costa,
P. Soffitta,
G. Ventura
Abstract:
Gamma-ray burst light curves show quite different patterns: from very simple to extremely complex. We present a temporal and spectral study of the light curves in three energy bands (2-5, 5-10, 10-26 keV) of ten GRBs detected by the Wide Field Cameras on board BeppoSAX. For some events the time profiles are characterized by peaks superposed on a slowly evolving pedestal, which in some cases beco…
▽ More
Gamma-ray burst light curves show quite different patterns: from very simple to extremely complex. We present a temporal and spectral study of the light curves in three energy bands (2-5, 5-10, 10-26 keV) of ten GRBs detected by the Wide Field Cameras on board BeppoSAX. For some events the time profiles are characterized by peaks superposed on a slowly evolving pedestal, which in some cases becomes less apparent at higher energies. We describe this behaviour with the presence of two components (slow and fast) having different variability time scales. We modelled the time evolution of slow components by means of an analytical function able to describe asymmetric rising and decaying profiles. The residual light curves, after the subtraction of the slow components, generally show structures more similar to the original curves in the highest energy band. Spectral study of these two components was performed evaluating their hardness ratios, used also to derive photon indices. Slow components are found generally softer than the fast ones suggesting that their origin is likely different. Being typical photon indices lower than those of the afterglows there is no evidence that the emission processes are similar. Another interesting possibility is that slow components can be related to the presence of a hot photosphere having a thermal spectrum with kT around a few keV superposed to a rapid variable non-thermal emission of the fast component.
△ Less
Submitted 11 October, 2005;
originally announced October 2005.
-
The BaR-SPOrt Experiment
Authors:
M. Zannoni,
S. Cortiglioni,
G. Bernardi,
E. Carretti,
S. Cecchini,
C. Macculi,
E. Morelli,
C. Sbarra,
G. Ventura,
L. Nicastro,
J. Monari,
M. Poloni,
S. Poppi,
V. Natale,
M. Baralis,
O. Peverini,
R. Tascone,
G. Virone,
A. Boscaleri,
E. Pascale,
G. Boella,
S. Bonometto,
M. Gervasi,
G. Sironi,
M. Tucci
, et al. (7 additional authors not shown)
Abstract:
BaR-SPOrt (Balloon-borne Radiometers for Sky Polarisation Observations) is an experiment to measure the linearly polarized emission of sky patches at 32 and 90 GHz with sub-degree angular resolution. It is equipped with high sensitivity correlation polarimeters for simultaneous detection of both the U and Q stokes parameters of the incident radiation. On-axis telescope is used to observe angular…
▽ More
BaR-SPOrt (Balloon-borne Radiometers for Sky Polarisation Observations) is an experiment to measure the linearly polarized emission of sky patches at 32 and 90 GHz with sub-degree angular resolution. It is equipped with high sensitivity correlation polarimeters for simultaneous detection of both the U and Q stokes parameters of the incident radiation. On-axis telescope is used to observe angular scales where the expected polarization of the Cosmic Microwave Background (CMBP) peaks. This project shares most of the know-how and sophisticated technology developed for the SPOrt experiment onboard the International Space Station. The payload is designed to flight onboard long duration stratospheric balloons both in the Northern and Southern hemispheres where low foreground emission sky patches are accessible. Due to the weakness of the expected CMBP signal (in the range of microK), much care has been spent to optimize the instrument design with respect to the systematics generation, observing time efficiency and long term stability. In this contribution we present the instrument design, and first tests on some components of the 32 GHz radiometer.
△ Less
Submitted 2 January, 2003;
originally announced January 2003.
-
A Robust Filter for the BeppoSAX Gamma Ray Burst Monitor Triggers
Authors:
M. Feroci,
C. L. Bianco,
F. Lazzarotto,
A. Mattei,
G. Ventura,
E. Costa,
F. Frontera
Abstract:
The BeppoSAX Gamma Ray Burst Monitor (GRBM) is triggered any time a statistically significant counting excess is simultaneously revealed by at least two of its four independent detectors. Several spurious effects, including highly ionizing particles crossing two detectors, are recorded as onboard triggers. In fact, a large number of false triggers is detected, in the order of 10/day. A software…
▽ More
The BeppoSAX Gamma Ray Burst Monitor (GRBM) is triggered any time a statistically significant counting excess is simultaneously revealed by at least two of its four independent detectors. Several spurious effects, including highly ionizing particles crossing two detectors, are recorded as onboard triggers. In fact, a large number of false triggers is detected, in the order of 10/day. A software code, based on an heuristic algorithm, was written to discriminate between real and false triggers. We present the results of the analysis on an homogeneous sample of GRBM triggers, thus providing an estimate of the efficiency of the GRB detection system consisting of the GRBM and the software.
△ Less
Submitted 23 December, 1999;
originally announced December 1999.