-
Euclid preparation. XXIX. Water ice in spacecraft part I: The physics of ice formation and contamination
Authors:
Euclid Collaboration,
M. Schirmer,
K. Thürmer,
B. Bras,
M. Cropper,
J. Martin-Fleitas,
Y. Goueffon,
R. Kohley,
A. Mora,
M. Portaluppi,
G. D. Racca,
A. D. Short,
S. Szmolka,
L. M. Gaspar Venancio,
M. Altmann,
Z. Balog,
U. Bastian,
M. Biermann,
D. Busonero,
C. Fabricius,
F. Grupp,
C. Jordi,
W. Löffler,
A. Sagristà Sellés,
N. Aghanim
, et al. (196 additional authors not shown)
Abstract:
Molecular contamination is a well-known problem in space flight. Water is the most common contaminant and alters numerous properties of a cryogenic optical system. Too much ice means that Euclid's calibration requirements and science goals cannot be met. Euclid must then be thermally decontaminated, a long and risky process. We need to understand how iced optics affect the data and when a decontam…
▽ More
Molecular contamination is a well-known problem in space flight. Water is the most common contaminant and alters numerous properties of a cryogenic optical system. Too much ice means that Euclid's calibration requirements and science goals cannot be met. Euclid must then be thermally decontaminated, a long and risky process. We need to understand how iced optics affect the data and when a decontamination is required. This is essential to build adequate calibration and survey plans, yet a comprehensive analysis in the context of an astrophysical space survey has not been done before.
In this paper we look at other spacecraft with well-documented outgassing records, and we review the formation of thin ice films. A mix of amorphous and crystalline ices is expected for Euclid. Their surface topography depends on the competing energetic needs of the substrate-water and the water-water interfaces, and is hard to predict with current theories. We illustrate that with scanning-tunnelling and atomic-force microscope images.
Industrial tools exist to estimate contamination, and we must understand their uncertainties. We find considerable knowledge errors on the diffusion and sublimation coefficients, limiting the accuracy of these tools. We developed a water transport model to compute contamination rates in Euclid, and find general agreement with industry estimates. Tests of the Euclid flight hardware in space simulators did not pick up contamination signals; our in-flight calibrations observations will be much more sensitive.
We must understand the link between the amount of ice on the optics and its effect on Euclid's data. Little research is available about this link, possibly because other spacecraft can decontaminate easily, quenching the need for a deeper understanding. In our second paper we quantify the various effects of iced optics on spectrophotometric data.
△ Less
Submitted 23 May, 2023; v1 submitted 17 May, 2023;
originally announced May 2023.
-
Euclid preparation. XVIII. The NISP photometric system
Authors:
Euclid Collaboration,
M. Schirmer,
K. Jahnke,
G. Seidel,
H. Aussel,
C. Bodendorf,
F. Grupp,
F. Hormuth,
S. Wachter,
P. N. Appleton,
R. Barbier,
J. Brinchmann,
J. M. Carrasco,
F. J. Castander,
J. Coupon,
F. De Paolis,
A. Franco,
K. Ganga,
P. Hudelot,
E. Jullo,
A. Lancon,
A. A. Nucita,
S. Paltani,
G. Smadja,
L. M. G. Venancio
, et al. (198 additional authors not shown)
Abstract:
Euclid will be the first space mission to survey most of the extragalactic sky in the 0.95-2.02 $μ$m range, to a 5$σ$ point-source median depth of 24.4 AB mag. This unique photometric data set will find wide use beyond Euclid's core science. In this paper, we present accurate computations of the Euclid Y_E, J_E and H_E passbands used by the Near-Infrared Spectrometer and Photometer (NISP), and the…
▽ More
Euclid will be the first space mission to survey most of the extragalactic sky in the 0.95-2.02 $μ$m range, to a 5$σ$ point-source median depth of 24.4 AB mag. This unique photometric data set will find wide use beyond Euclid's core science. In this paper, we present accurate computations of the Euclid Y_E, J_E and H_E passbands used by the Near-Infrared Spectrometer and Photometer (NISP), and the associated photometric system. We pay particular attention to passband variations in the field of view, accounting among others for spatially variable filter transmission, and variations of the angle of incidence on the filter substrate using optical ray tracing. The response curves' cut-on and cut-off wavelengths - and their variation in the field of view - are determined with 0.8 nm accuracy, essential for the photometric redshift accuracy required by Euclid. After computing the photometric zeropoints in the AB mag system, we present linear transformations from and to common ground-based near-infrared photometric systems, for normal stars, red and brown dwarfs, and galaxies separately. A Python tool to compute accurate magnitudes for arbitrary passbands and spectral energy distributions is provided. We discuss various factors from space weathering to material outgassing that may slowly alter Euclid's spectral response. At the absolute flux scale, the Euclid in-flight calibration program connects the NISP photometric system to Hubble Space Telescope spectrophotometric white dwarf standards; at the relative flux scale, the chromatic evolution of the response is tracked at the milli-mag level. In this way, we establish an accurate photometric system that is fully controlled throughout Euclid's lifetime.
△ Less
Submitted 31 March, 2022; v1 submitted 3 March, 2022;
originally announced March 2022.
-
Euclid preparation: XVI. Exploring the ultra low-surface brightness Universe with Euclid/VIS
Authors:
A. S. Borlaff,
P. Gómez-Alvarez,
B. Altieri,
P. M. Marcum,
R. Vavrek,
R. Laureijs,
R. Kohley,
F. Buitrago,
J. C. Cuillandre,
P. A. Duc,
L. M. Gaspar Venancio,
A. Amara,
S. Andreon,
N. Auricchio,
R. Azzollini,
C. Baccigalupi,
A. Balaguera-Antolínez,
M. Baldi,
S. Bardelli,
R. Bender,
A. Biviano,
C. Bodendorf,
D. Bonino,
E. Bozzo,
E. Branchini
, et al. (158 additional authors not shown)
Abstract:
While Euclid is an ESA mission specifically designed to investigate the nature of Dark Energy and Dark Matter, the planned unprecedented combination of survey area ($\sim15\,000$ deg$^2$), spatial resolution, low sky-background, and depth also make Euclid an excellent space observatory for the study of the low surface brightness Universe. Scientific exploitation of the extended low surface brightn…
▽ More
While Euclid is an ESA mission specifically designed to investigate the nature of Dark Energy and Dark Matter, the planned unprecedented combination of survey area ($\sim15\,000$ deg$^2$), spatial resolution, low sky-background, and depth also make Euclid an excellent space observatory for the study of the low surface brightness Universe. Scientific exploitation of the extended low surface brightness structures requires dedicated calibration procedures yet to be tested.
We investigate the capabilities of Euclid to detect extended low surface brightness structure by identifying and quantifying sky background sources and stray-light contamination. We test the feasibility of generating sky flat-fields to reduce large-scale residual gradients in order to reveal the extended emission of galaxies observed in the Euclid Survey.
We simulate a realistic set of Euclid/VIS observations, taking into account both instrumental and astronomical sources of contamination, including cosmic rays, stray-light, zodiacal light, ISM, and the CIB, while simulating the effects of the presence of background sources in the FOV.
We demonstrate that a combination of calibration lamps, sky flats and self-calibration would enable recovery of emission at a limiting surface brightness magnitude of $μ=29.5^{+0.08}_{-0.27} $ mag arcsec$^{-2}$ ($3σ$, $10\times10$ arcsec$^2$) in the Wide Survey, reaching regions 2 magnitudes deeper in the Deep Surveys.
Euclid/VIS has the potential to be an excellent low surface brightness observatory. Covering the gap between pixel-to-pixel calibration lamp flats and self-calibration observations for large scales, the application of sky flat-fielding will enhance the sensitivity of the VIS detector at scales of larger than 1 degree, up to the size of the FOV, enabling Euclid to detect extended surface brightness structures below $μ=31$ mag arcsec$^{-2}$ and beyond.
△ Less
Submitted 23 August, 2021;
originally announced August 2021.
-
Euclid preparation: I. The Euclid Wide Survey
Authors:
R. Scaramella,
J. Amiaux,
Y. Mellier,
C. Burigana,
C. S. Carvalho,
J. -C. Cuillandre,
A. Da Silva,
A. Derosa,
J. Dinis,
E. Maiorano,
M. Maris,
I. Tereno,
R. Laureijs,
T. Boenke,
G. Buenadicha,
X. Dupac,
L. M. Gaspar Venancio,
P. Gómez-Álvarez,
J. Hoar,
J. Lorenzo Alvarez,
G. D. Racca,
G. Saavedra-Criado,
J. Schwartz,
R. Vavrek,
M. Schirmer
, et al. (216 additional authors not shown)
Abstract:
Euclid is an ESA mission designed to constrain the properties of dark energy and gravity via weak gravitational lensing and galaxy clustering. It will carry out a wide area imaging and spectroscopy survey (EWS) in visible and near-infrared, covering roughly 15,000 square degrees of extragalactic sky on six years. The wide-field telescope and instruments are optimized for pristine PSF and reduced s…
▽ More
Euclid is an ESA mission designed to constrain the properties of dark energy and gravity via weak gravitational lensing and galaxy clustering. It will carry out a wide area imaging and spectroscopy survey (EWS) in visible and near-infrared, covering roughly 15,000 square degrees of extragalactic sky on six years. The wide-field telescope and instruments are optimized for pristine PSF and reduced straylight, producing very crisp images. This paper presents the building of the Euclid reference survey: the sequence of pointings of EWS, Deep fields, Auxiliary fields for calibrations, and spacecraft movements followed by Euclid as it operates in a step-and-stare mode from its orbit around the Lagrange point L2. Each EWS pointing has four dithered frames; we simulate the dither pattern at pixel level to analyse the effective coverage. We use up-to-date models for the sky background to define the Euclid region-of-interest (RoI). The building of the reference survey is highly constrained from calibration cadences, spacecraft constraints and background levels; synergies with ground-based coverage are also considered. Via purposely-built software optimized to prioritize best sky areas, produce a compact coverage, and ensure thermal stability, we generate a schedule for the Auxiliary and Deep fields observations and schedule the RoI with EWS transit observations. The resulting reference survey RSD_2021A fulfills all constraints and is a good proxy for the final solution. Its wide survey covers 14,500 square degrees. The limiting AB magnitudes ($5σ$ point-like source) achieved in its footprint are estimated to be 26.2 (visible) and 24.5 (near-infrared); for spectroscopy, the H$_α$ line flux limit is $2\times 10^{-16}$ erg cm$^{-2}$ s$^{-1}$ at 1600 nm; and for diffuse emission the surface brightness limits are 29.8 (visible) and 28.4 (near-infrared) mag arcsec$^{-2}$.
△ Less
Submitted 2 August, 2021;
originally announced August 2021.
-
The Euclid mission design
Authors:
Giuseppe D Racca,
Rene Laureijs,
Luca Stagnaro,
Jean Christophe Salvignol,
Jose Lorenzo Alvarez,
Gonzalo Saavedra Criado,
Luis Gaspar Venancio,
Alex Short,
Paolo Strada,
Tobias Boenke,
Cyril Colombo,
Adriano Calvi,
Elena Maiorano,
Osvaldo Piersanti,
Sylvain Prezelus,
Pierluigi Rosato,
Jacques Pinel,
Hans Rozemeijer,
Valentina Lesna,
Paolo Musi,
Marco Sias,
Alberto Anselmi,
Vincent Cazaubiel,
Ludovic Vaillon,
Yannick Mellier
, et al. (17 additional authors not shown)
Abstract:
Euclid is a space-based optical/near-infrared survey mission of the European Space Agency (ESA) to investigate the nature of dark energy, dark matter and gravity by observing the geometry of the Universe and on the formation of structures over cosmological timescales. Euclid will use two probes of the signature of dark matter and energy: Weak gravitational Lensing, which requires the measurement o…
▽ More
Euclid is a space-based optical/near-infrared survey mission of the European Space Agency (ESA) to investigate the nature of dark energy, dark matter and gravity by observing the geometry of the Universe and on the formation of structures over cosmological timescales. Euclid will use two probes of the signature of dark matter and energy: Weak gravitational Lensing, which requires the measurement of the shape and photometric redshifts of distant galaxies, and Galaxy Clustering, based on the measurement of the 3-dimensional distribution of galaxies through their spectroscopic redshifts. The mission is scheduled for launch in 2020 and is designed for 6 years of nominal survey operations. The Euclid Spacecraft is composed of a Service Module and a Payload Module. The Service Module comprises all the conventional spacecraft subsystems, the instruments warm electronics units, the sun shield and the solar arrays. In particular the Service Module provides the extremely challenging pointing accuracy required by the scientific objectives. The Payload Module consists of a 1.2 m three-mirror Korsch type telescope and of two instruments, the visible imager and the near-infrared spectro-photometer, both covering a large common field-of-view enabling to survey more than 35% of the entire sky. All sensor data are downlinked using K-band transmission and processed by a dedicated ground segment for science data processing. The Euclid data and catalogues will be made available to the public at the ESA Science Data Centre.
△ Less
Submitted 18 October, 2016;
originally announced October 2016.
