-
Observations of the Polarized Solar Corona during the Annular Eclipse of October 14, 2023
Authors:
Daniel B. Seaton,
Amir Caspi,
Nathalia Alzate,
Sarah J. Davis,
Alec R. DeForest,
Craig E. DeForest,
Nicholas F. Erickson,
Sarah A. Kovac,
Ritesh Patel,
Steven N. Osterman,
Anna Tosolini,
Samuel J. Van Kooten,
Matthew J. West
Abstract:
We present results of a dual eclipse expedition to observe the solar corona from two sites during the annular solar eclipse of 2023 October 14, using a novel coronagraph designed to be accessible for amateurs and students to build and deploy. The coronagraph "CATEcor" builds on the standardized eclipse observing equipment developed for the Citizen CATE 2024 experiment. The observing sites were sel…
▽ More
We present results of a dual eclipse expedition to observe the solar corona from two sites during the annular solar eclipse of 2023 October 14, using a novel coronagraph designed to be accessible for amateurs and students to build and deploy. The coronagraph "CATEcor" builds on the standardized eclipse observing equipment developed for the Citizen CATE 2024 experiment. The observing sites were selected for likelihood of clear observations, for historic relevance (near the Climax site in the Colorado Rocky Mountains), and for centrality to the annular eclipse path (atop Sandia Peak above Albuquerque, New Mexico). The novel portion of CATEcor is an external occulter assembly that slips over the front of a conventional dioptric telescope, forming a "shaded-truss" externally occulted coronagraph. CATEcor is specifically designed to be easily constructed in a garage or "makerspace" environment. We successfully observed some bright features in the solar corona to an altitude of approximately 2.25 R$_\odot$ during the annular phases of the eclipse. Future improvements to the design, in progress now, will reduce both stray light and image artifacts; our objective is to develop a design that can be operated successfully by amateur astronomers at sufficient altitude even without the darkened skies of a partial or annular eclipse.
△ Less
Submitted 3 April, 2024; v1 submitted 2 April, 2024;
originally announced April 2024.
-
Using Bright-Point Shapes to Constrain Wave-Heating of the Solar Corona: Predictions for DKIST
Authors:
Samuel J. Van Kooten,
Steven R. Cranmer
Abstract:
Magnetic bright points on the solar photosphere mark the footpoints of kilogauss magnetic flux tubes extending toward the corona. Convective buffeting of these tubes is believed to excite magnetohydrodynamic waves, which can propagate to the corona and there deposit heat. Measuring wave excitation via bright-point motion can thus constrain coronal and heliospheric models, and this has been done ex…
▽ More
Magnetic bright points on the solar photosphere mark the footpoints of kilogauss magnetic flux tubes extending toward the corona. Convective buffeting of these tubes is believed to excite magnetohydrodynamic waves, which can propagate to the corona and there deposit heat. Measuring wave excitation via bright-point motion can thus constrain coronal and heliospheric models, and this has been done extensively with centroid tracking, which can estimate kink-mode wave excitation. DKIST is the first telescope to provide well-resolved observations of bright points, allowing shape and size measurements to probe the excitation of other wave modes that have been difficult, if not impossible, to study to date. In this work, we demonstrate a method of automatic bright-point tracking that robustly identifies the shapes of bright points, and we develop a technique for interpreting measured bright-point shape changes as the driving of a range of thin-tube wave modes. We demonstrate these techniques on a MURaM simulation of DKIST-like resolution. These initial results suggest that modes other than the long-studied kink mode could increase the total available energy budget for wave-heating by 50%. Pending observational verification as well as modeling of the propagation and dissipation of these additional wave modes, this could represent a significant increase in the potency of wave-turbulence heating models.
△ Less
Submitted 19 January, 2024;
originally announced February 2024.
-
Defining the Middle Corona
Authors:
Matthew J. West,
Daniel B. Seaton,
David B. Wexler,
John C. Raymond,
Giulio Del Zanna,
Yeimy J. Rivera,
Adam R. Kobelski,
Craig DeForest,
Leon Golub,
Amir Caspi,
Chris R. Gilly,
Jason E. Kooi,
Benjamin L. Alterman,
Nathalia Alzate,
Dipankar Banerjee,
David Berghmans,
Bin Chen,
Lakshmi Pradeep Chitta,
Cooper Downs,
Silvio Giordano,
Aleida Higginson,
Russel A. Howard,
Emily Mason,
James P. Mason,
Karen A. Meyer
, et al. (9 additional authors not shown)
Abstract:
The middle corona, the region roughly spanning heliocentric altitudes from $1.5$ to $6\,R_\odot$, encompasses almost all of the influential physical transitions and processes that govern the behavior of coronal outflow into the heliosphere. Eruptions that could disrupt the near-Earth environment propagate through it. Importantly, it modulates inflow from above that can drive dynamic changes at low…
▽ More
The middle corona, the region roughly spanning heliocentric altitudes from $1.5$ to $6\,R_\odot$, encompasses almost all of the influential physical transitions and processes that govern the behavior of coronal outflow into the heliosphere. Eruptions that could disrupt the near-Earth environment propagate through it. Importantly, it modulates inflow from above that can drive dynamic changes at lower heights in the inner corona. Consequently, this region is essential for comprehensively connecting the corona to the heliosphere and for develo** corresponding global models. Nonetheless, because it is challenging to observe, the middle corona has been poorly studied by major solar remote sensing missions and instruments, extending back to the Solar and Heliospheric Observatory (SoHO) era. Thanks to recent advances in instrumentation, observational processing techniques, and a realization of the importance of the region, interest in the middle corona has increased. Although the region cannot be intrinsically separated from other regions of the solar atmosphere, there has emerged a need to define the region in terms of its location and extension in the solar atmosphere, its composition, the physical transitions it covers, and the underlying physics believed to be encapsulated by the region. This paper aims to define the middle corona and give an overview of the processes that occur there.
△ Less
Submitted 9 March, 2023; v1 submitted 8 August, 2022;
originally announced August 2022.
-
The Astropy Project: Sustaining and Growing a Community-oriented Open-source Project and the Latest Major Release (v5.0) of the Core Package
Authors:
The Astropy Collaboration,
Adrian M. Price-Whelan,
Pey Lian Lim,
Nicholas Earl,
Nathaniel Starkman,
Larry Bradley,
David L. Shupe,
Aarya A. Patil,
Lia Corrales,
C. E. Brasseur,
Maximilian Nöthe,
Axel Donath,
Erik Tollerud,
Brett M. Morris,
Adam Ginsburg,
Eero Vaher,
Benjamin A. Weaver,
James Tocknell,
William Jamieson,
Marten H. van Kerkwijk,
Thomas P. Robitaille,
Bruce Merry,
Matteo Bachetti,
H. Moritz Günther,
Thomas L. Aldcroft
, et al. (111 additional authors not shown)
Abstract:
The Astropy Project supports and fosters the development of open-source and openly-developed Python packages that provide commonly needed functionality to the astronomical community. A key element of the Astropy Project is the core package $\texttt{astropy}$, which serves as the foundation for more specialized projects and packages. In this article, we summarize key features in the core package as…
▽ More
The Astropy Project supports and fosters the development of open-source and openly-developed Python packages that provide commonly needed functionality to the astronomical community. A key element of the Astropy Project is the core package $\texttt{astropy}$, which serves as the foundation for more specialized projects and packages. In this article, we summarize key features in the core package as of the recent major release, version 5.0, and provide major updates for the Project. We then discuss supporting a broader ecosystem of interoperable packages, including connections with several astronomical observatories and missions. We also revisit the future outlook of the Astropy Project and the current status of Learn Astropy. We conclude by raising and discussing the current and future challenges facing the Project.
△ Less
Submitted 28 June, 2022;
originally announced June 2022.
-
Moosinesq Convection in the Cores of Moosive Stars
Authors:
Evan H. Anders,
Evan B. Bauer,
Adam S. Jermyn,
Samuel J. Van Kooten,
Benjamin P. Brown,
Eric W. Hester,
Mindy Wilkinson,
Jared A. Goldberg,
Tania Varesano,
Daniel Lecoanet
Abstract:
Stars with masses $\gtrsim 4 \times 10^{27}M_{\rm{moose}} \approx 1.1 M_\odot$ have core convection zones during their time on the main sequence. In these moosive stars, convection introduces many uncertainties in stellar modeling. In this Letter, we build upon the Boussinesq approximation to present the first-ever simulations of Moosinesq convection, which captures the complex geometric structure…
▽ More
Stars with masses $\gtrsim 4 \times 10^{27}M_{\rm{moose}} \approx 1.1 M_\odot$ have core convection zones during their time on the main sequence. In these moosive stars, convection introduces many uncertainties in stellar modeling. In this Letter, we build upon the Boussinesq approximation to present the first-ever simulations of Moosinesq convection, which captures the complex geometric structure of the convection zones of these stars. These flows are bounded in a manner informed by the majestic terrestrial Alces alces (moose) and could have important consequences for the evolution of these stars. We find that Moosinesq convection results in very interesting flow morphologies and rapid heat transfer, and posit this as a mechanism of biomechanical thermoregulation.
△ Less
Submitted 30 March, 2022;
originally announced April 2022.
-
Cause and Effect: Stellar Convection Studied Through Flickering Brightness, and the Convectively-Driven Motions of Solar Bright Points
Authors:
Samuel J. Van Kooten
Abstract:
Magnetic bright points on the solar photosphere mark the footpoints of kilogauss magnetic flux tubes extending toward the corona. Convective buffeting of these tubes is believed to excite MHD waves, which can propagate to the corona and deposit heat. Measuring wave excitation via bright-point motion can thus constrain coronal and heliospheric models. This has been done extensively with centroid tr…
▽ More
Magnetic bright points on the solar photosphere mark the footpoints of kilogauss magnetic flux tubes extending toward the corona. Convective buffeting of these tubes is believed to excite MHD waves, which can propagate to the corona and deposit heat. Measuring wave excitation via bright-point motion can thus constrain coronal and heliospheric models. This has been done extensively with centroid tracking to estimate kink-mode wave excitation. DKIST will be the first telescope to resolve well the shapes and sizes of bright points, which can probe wave modes that have been difficult or impossible to study to date. I develop two complementary ways to take the first step in such an investigation, which I demonstrate on MURaM-simulated images of DKIST-like resolution as a proof-of-concept in preparation for future observations. I show that these additional wave modes may double the energy budget of this wave-heating model.
I also investigate the convection driving bright-point motion. I use a simplified model of granulation alongside MURaM to explore how bright-point motion depends on convective properties, and I show the importance of turbulence to high-frequency motion.
Separately, I investigate high-frequency, stochastic brightness fluctuations ("flicker" or $F_8$) in Kepler light curves, which are the signature of stellar convection. I confront a physical model of flicker with measured values across the H-R diagram. I improve the model's agreement with observations by including the effect of the Kepler bandpass on measured flicker, including metallicity in determining convective Mach numbers, and using scaling relations from a wider set of numerical simulations. I also explore how future research could improve the model. In doing so, I help to establish flicker as a stellar constraint on convective simulations, which may support future advances in both stellar and solar convection.
△ Less
Submitted 24 August, 2021;
originally announced August 2021.
-
A Refined Model of Convectively-Driven Flicker in Kepler Light Curves
Authors:
Samuel J. Van Kooten,
Evan H. Anders,
Steven R. Cranmer
Abstract:
Light curves produced by the Kepler mission demonstrate stochastic brightness fluctuations (or "flicker") of stellar origin which contribute to the noise floor, limiting the sensitivity of exoplanet detection and characterization methods. In stars with surface convection, the primary driver of these variations on short (sub-eight-hour) timescales is believed to be convective granulation. In this w…
▽ More
Light curves produced by the Kepler mission demonstrate stochastic brightness fluctuations (or "flicker") of stellar origin which contribute to the noise floor, limiting the sensitivity of exoplanet detection and characterization methods. In stars with surface convection, the primary driver of these variations on short (sub-eight-hour) timescales is believed to be convective granulation. In this work, we improve existing models of this granular flicker amplitude, or $F_8$, by including the effect of the Kepler bandpass on measured flicker, by incorporating metallicity in determining convective Mach numbers, and by using scaling relations from a wider set of numerical simulations. To motivate and validate these changes, we use a recent database of convective flicker measurements in Kepler stars, which allows us to more fully detail the remaining model--prediction error. Our model improvements reduce the typical misprediction of flicker amplitude from a factor of 2.5 to 2. We rule out rotation period and strong magnetic activity as possible explanations for the remaining model error, and we show that binary companions may affect convective flicker. We also introduce an "envelope" model which predicts a range of flicker amplitudes for any one star to account for some of the spread in numerical simulations, and we find that this range covers 78% of observed stars. We note that the solar granular flicker amplitude is lower than most Sun-like stars. This improved model of convective flicker amplitude can better characterize this source of noise in exoplanet studies as well as better inform models and simulations of stellar granulation.
△ Less
Submitted 13 April, 2021;
originally announced April 2021.
-
Characterizing the Motion of Solar Magnetic Bright Points at High Resolution
Authors:
Samuel J. Van Kooten,
Steven R. Cranmer
Abstract:
Magnetic bright points in the solar photosphere, visible in both continuum and G-band images, indicate footpoints of kilogauss magnetic flux tubes extending to the corona. The power spectrum of bright-point motion is thus also the power spectrum of Alfven wave excitation, transporting energy up flux tubes into the corona. This spectrum is a key input in coronal and heliospheric models. We produce…
▽ More
Magnetic bright points in the solar photosphere, visible in both continuum and G-band images, indicate footpoints of kilogauss magnetic flux tubes extending to the corona. The power spectrum of bright-point motion is thus also the power spectrum of Alfven wave excitation, transporting energy up flux tubes into the corona. This spectrum is a key input in coronal and heliospheric models. We produce a power spectrum of bright-point motion using radiative magnetohydrodynamic simulations, exploiting spatial resolution higher than can be obtained in present-day observations, while using automated tracking to produce large data quantities. We find slightly higher amounts of power at all frequencies compared to observation-based spectra, while confirming the spectrum shape of recent observations. This also provides a prediction for observations of bright points with DKIST, which will achieve similar resolution and high sensitivity. We also find a granule size distribution in support of an observed two-population distribution, and we present results from tracking passive tracers which show a similar power spectrum to that of bright points. Finally, we introduce a simplified, laminar model of granulation, with which we explore the roles of turbulence and of the properties of the granulation pattern in determining bright-point motion.
△ Less
Submitted 12 October, 2017;
originally announced October 2017.
-
Defining the Flora Family: Orbital Properties, Reflectance Properties and Age
Authors:
Melissa J. Dykhuis,
Lawrence Molnar,
Samuel J. Van Kooten,
Richard Greenberg
Abstract:
The Flora family resides in the densely populated inner main belt, bounded in semimajor axis by the $ν_6$ secular resonance and the Jupiter 3:1 mean motion resonance. The presence of several large families that overlap dynamically with the Floras (e.g., the Vesta, Baptistina, and Nysa-Polana families), and the removal of a significant fraction of Floras via the nearby $ν_6$ resonance complicates t…
▽ More
The Flora family resides in the densely populated inner main belt, bounded in semimajor axis by the $ν_6$ secular resonance and the Jupiter 3:1 mean motion resonance. The presence of several large families that overlap dynamically with the Floras (e.g., the Vesta, Baptistina, and Nysa-Polana families), and the removal of a significant fraction of Floras via the nearby $ν_6$ resonance complicates the Flora family's distinction in both proper orbital elements and reflectance properties. Here we use orbital information from the Asteroids Dynamic Site, color information from the Sloan Digital Sky Survey, and albedo information from the Wide-field Infrared Survey Explorer to obtain the median orbital and reflectance properties of the Floras by sampling the core of the family in multidimensional phase space. We find the median Flora SDSS colors to be $a^*$ = 0.126 $\pm$ 0.007 and $i-z = -0.037 \pm 0.007$; the median Flora albedo is $p_V$ = 0.291 $\pm$ 0.012. These properties allow us to define ranges for the Flora family in orbital and reflectance properties, as required for a detailed dynamical study. We use the young Karin family, for which we have an age determined via direct backward integration of members' orbits, to calibrate the Yarkovsky drift rates for the Flora family without having to estimate the Floras' material properties. The size-dependent dispersion of the Flora members in semimajor axis (the "V" plot) then yields an age for the family of $910^{+160}_{-120}$ My, with the uncertainty dominated by the uncertainty in the material properties of the family members (e.g., density and surface thermal properties). We discuss the effects on our age estimate of two independent processes that both introduce obliquity variations among the family members on short (My) timescales: 1) the capture of Flora members in spin-orbit resonance, and 2) YORP-driven obliquity variation.
△ Less
Submitted 27 April, 2014;
originally announced April 2014.
