-
The Active Optics System on the Vera C. Rubin Observatory: Optimal Control of Degeneracy Among the Large Number of Degrees of Freedom
Authors:
Guillem Megias Homar,
Steven M. Kahn,
Joshua M. Meyers,
John Franklin Crenshaw,
Sandrine J. Thomas
Abstract:
The Vera C. Rubin Observatory is a unique facility for survey astronomy that will soon be commissioned and begin operations. Crucial to many of its scientific goals is the achievement of sustained high image quality, limited only by the seeing at the site. This will be maintained through an Active Optics System (AOS) that controls optical element misalignments and corrects mirror figure error to m…
▽ More
The Vera C. Rubin Observatory is a unique facility for survey astronomy that will soon be commissioned and begin operations. Crucial to many of its scientific goals is the achievement of sustained high image quality, limited only by the seeing at the site. This will be maintained through an Active Optics System (AOS) that controls optical element misalignments and corrects mirror figure error to minimize aberrations caused by both thermal and gravitational distortions. However, the large number of adjustment degrees of freedom available on the Rubin Observatory introduces a range of degeneracies, including many that are \textit{noise-induced} due to imperfect measurement of the wavefront errors. We present a structured methodology for identifying these degeneracies through an analysis of image noise level. We also present a novel scaling strategy based on Truncated Singular Value Decomposition (TSVD) that mitigates the degeneracy, and optimally distributes the adjustment over the available degrees of freedom. Our approach ensures the attainment of optimal image quality, while avoiding excursions around the noise-induced subspace of degeneracies, marking a significant improvement over the previous techniques adopted for Rubin, which were based on an Optimal Integral Controller (OIC). This new approach is likely to also yield significant benefits for all telescopes that incorporate large numbers of degrees of freedom of adjustment.
△ Less
Submitted 7 June, 2024;
originally announced June 2024.
-
Future Uses of the LSST Facility: Input from the LSST Project Science Team
Authors:
S. Kahn,
Robert Blum,
Chuck Claver,
Andrew Connolly,
Leanne Guy,
Željko Ivezić,
Robert H. Lupton,
William O'Mullane,
Steven Ritz,
Michael Strauss,
Christopher Stubbs,
Sandrine J. Thomas,
J. Anthony Tyson,
Bo Xin
Abstract:
In this white paper, we discuss future uses of the LSST facility after the planned 10-year survey is complete. We expect the LSST survey to profoundly affect the scientific landscape over the next ten years, and it is likely that unexpected discoveries may drive its future scientific program. We discuss various operations and instrument options that could be considered for an extended LSST mission…
▽ More
In this white paper, we discuss future uses of the LSST facility after the planned 10-year survey is complete. We expect the LSST survey to profoundly affect the scientific landscape over the next ten years, and it is likely that unexpected discoveries may drive its future scientific program. We discuss various operations and instrument options that could be considered for an extended LSST mission beyond ten years.
△ Less
Submitted 21 July, 2019;
originally announced July 2019.
-
Demonstration of broadband contrast at 1.2 $λ$/D and greater for the EXCEDE Starlight Suppression System
Authors:
Dan Sirbu,
Sandrine J. Thomas,
Ruslan Belikov,
Julien Lozi,
Eduardo Bendek,
Eugene Pluzhnik,
Dana H. Lynch,
Troy Hix,
Peter Zell,
Olivier Guyon,
Glenn Schneider
Abstract:
The EXoplanetary Circumstellar Environments and Disk Explorer (EXCEDE) science mission concept uses a visible-wavelength Phase-Induced Amplitude Apodization (PIAA) coronagraph to enable high-contrast imaging of circumstellar debris systems and some giant planets at angular separations reaching into the habitable zones of some of the nearest stars. We report on the experimental results obtained in…
▽ More
The EXoplanetary Circumstellar Environments and Disk Explorer (EXCEDE) science mission concept uses a visible-wavelength Phase-Induced Amplitude Apodization (PIAA) coronagraph to enable high-contrast imaging of circumstellar debris systems and some giant planets at angular separations reaching into the habitable zones of some of the nearest stars. We report on the experimental results obtained in the vacuum chamber at the Lockheed Martin Advanced Technology Center in 10% broadband light centered about 650 nm, with a median contrast of $1 \times 10^{-5}$ between 1.2 and 2.0 $λ$/D simultaneously with $3 \times 10^{-7}$ contrast between 2 and 11 $λ/D$ for a single-sided dark hole using a deformable mirror (DM) upstream of the PIAA coronagraph. These results are stable and repeatable as demonstrated by three measurements runs with DM settings set from scratch and maintained on the best 90% out of the 1000 collected frames. We compare the reduced experimental data with simulation results from modeling observed experimental limits; observed performance is consistent with uncorrected low-order modes not estimated by the Low Order Wavefront Sensor (LOWFS). Modeled sensitivity to bandwidth and residual tip/tilt modes is well-matched to the experiment.
△ Less
Submitted 7 September, 2017;
originally announced September 2017.
-
A method to directly image exoplanets in multi-star systems such as Alpha-Centauri
Authors:
Sandrine J. Thomas,
Ruslan Belikov,
Eduardo Bendek
Abstract:
Direct imaging of extra-solar planets is now a reality, especially with the deployment and commissioning of the first generation of specialized ground-based instruments such as the Gemini Planet Imager and SPHERE. These systems will allow detection of Jupiter-like planets $10^7$ times fainter than their host star. Obtaining this contrast level and beyond requires the combination of a coronagraph t…
▽ More
Direct imaging of extra-solar planets is now a reality, especially with the deployment and commissioning of the first generation of specialized ground-based instruments such as the Gemini Planet Imager and SPHERE. These systems will allow detection of Jupiter-like planets $10^7$ times fainter than their host star. Obtaining this contrast level and beyond requires the combination of a coronagraph to suppress light coming from the host star and a wavefront control system including a deformable mirror (DM) to remove residual starlight (speckles) created by the imperfections of telescope. However, all these current and future systems focus on detecting faint planets around single host stars, while several targets or planet candidates are located around nearby binary stars such as our neighboring star Alpha Centauri. Here, we present a method to simultaneously correct aberrations and diffraction of light coming from the target star as well as its companion star in order to reveal planets orbiting the target star. This method works even if the companion star is outside the control region of the DM (beyond its half-Nyquist frequency), by taking advantage of aliasing effects.
△ Less
Submitted 8 October, 2015;
originally announced October 2015.
-
Techniques for High Contrast Imaging in Multi-Star Systems I: Super-Nyquist Wavefront Control
Authors:
Sandrine J. Thomas,
Ruslan Belikov,
Eduardo Bendek
Abstract:
Extra-solar planets direct imaging is now a reality with the deployment and commissioning of the first generation of specialized ground-based instruments (GPI, SPHERE, P1640 and SCExAO). These systems allow of planets $ 10 ^ 7 $ times fainter than their host star. For space-based missions (EXCEDE, EXO-C, EXO-S, WFIRST), various teams have demonstrated laboratory contrasts reaching…
▽ More
Extra-solar planets direct imaging is now a reality with the deployment and commissioning of the first generation of specialized ground-based instruments (GPI, SPHERE, P1640 and SCExAO). These systems allow of planets $ 10 ^ 7 $ times fainter than their host star. For space-based missions (EXCEDE, EXO-C, EXO-S, WFIRST), various teams have demonstrated laboratory contrasts reaching $ 10 ^ { -10 } $ within a few diffraction limits from the star. However, all of these current and future systems are designed to detect faint planets around a single host star or unresolved multiples, while most non M-dwarf stars such as Alpha Centauri belong to multi-star systems. Direct imaging around binaries/multiple systems at a level of contrast allowing Earth-like planet detection is challenging because the region of interest is contaminated by the hosts star companion as well as the host Generally, the light leakage is caused by both diffraction and aberrations in the system. Moreover, the region of interest usually falls outside the correcting zone of the deformable mirror (DM) for the companion. Until now, it has been thought that removing the light of a companion star is too challenging, leading to the exclusion of binary systems from target lists of direct imaging coronographic missions. In this paper, we will show different new techniques for high-contrast imaging of planets around multi-star systems and detail the Super-Nyquist Wavefront Control (SNWC) method, which allows to control wavefront errors beyond nominal control region of the DM. Using the SNWC we reached contrasts around $ 5 \times 10 ^ { -9 } $ in a 10% bandwidth.
△ Less
Submitted 7 January, 2015;
originally announced January 2015.
-
EXCEDE Technology Development III: First Vacuum Tests
Authors:
Ruslan Belikov,
Julien Lozi,
Eugene Pluzhnik,
Troy T. Hix,
Eduardo Bendek,
Sandrine J. Thomas,
Dana H. Lynch,
Roger Mihara,
J. Wes Irwin,
Alan L. Duncan,
Thomas P. Greene,
Olivier Guyon,
Richard L. Kendrick,
Eric H. Smith,
Fred C. Witteborn,
Glenn Schneider
Abstract:
This paper is the third in the series on the technology development for the EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer) mission concept, which in 2011 was selected by NASA's Explorer program for technology development (Category III). EXCEDE is a 0.7m space telescope concept designed to achieve raw contrasts of 1e6 at an inner working angle of 1.2 l/D and 1e7 at 2 l/D and bey…
▽ More
This paper is the third in the series on the technology development for the EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer) mission concept, which in 2011 was selected by NASA's Explorer program for technology development (Category III). EXCEDE is a 0.7m space telescope concept designed to achieve raw contrasts of 1e6 at an inner working angle of 1.2 l/D and 1e7 at 2 l/D and beyond. This will allow it to directly detect and spatially resolve low surface brightness circumstellar debris disks as well as image giant planets as close as in the habitable zones of their host stars. In addition to doing fundamental science on debris disks, EXCEDE will also serve as a technological and scientific precursor for any future exo-Earth imaging mission. EXCEDE uses a Starlight Suppression System (SSS) based on the PIAA coronagraph, enabling aggressive performance.
We report on our continuing progress of develo** the SSS for EXCEDE, and in particular (a) the reconfiguration of our system into a more flight-like layout, with an upstream deformable mirror and an inverse PIAA system, as well as a LOWFS, and (b) testing this system in a vacuum chamber, including IWA, contrast, and stability performance. The results achieved so far are 2.9e-7 contrast between 1.2-2.0 l/D and 9.7e-8 contrast between 2.0-6.0 l/D in monochromatic light; as well as 1.4e-6 between 2.0-6.0 l/D in a 10% band, all with a PIAA coronagraph operating at an inner working angle of 1.2 l/D. This constitutes better contrast than EXCEDE requirements (in those regions) in monochromatic light, and progress towards requirements in broadband light. Even though this technology development is primarily targeted towards EXCEDE, it is also germane to any exoplanet direct imaging space-based telescopes because of the many challenges common to different coronagraph architectures and mission requirements.
△ Less
Submitted 16 July, 2014;
originally announced July 2014.
-
Simulation of a method to directly image exoplanets around multiple stars systems
Authors:
Sandrine J. Thomas,
Ruslan Belikov,
Eduardo Bendek
Abstract:
Direct imaging of extra-solar planets has now become a reality, especially with the deployment and commissioning of the first generation of specialized ground-based instruments such as the GPI, SPHERE, P1640 and SCExAO. These systems will allow detection of planets 1e7 times fainter than their host star.
For space-based missions, such as EXCEDE, EXO-C, EXO-S, WFIRST-AFTA, different teams have sh…
▽ More
Direct imaging of extra-solar planets has now become a reality, especially with the deployment and commissioning of the first generation of specialized ground-based instruments such as the GPI, SPHERE, P1640 and SCExAO. These systems will allow detection of planets 1e7 times fainter than their host star.
For space-based missions, such as EXCEDE, EXO-C, EXO-S, WFIRST-AFTA, different teams have shown in laboratories contrasts reaching 1e-10 within a few diffraction limits from the star using a combination of a coronagraph to suppress light coming from the host star and a wavefront control system. These demonstrations use a deformable mirror (DM) to remove residual starlight (speckles) created by the imperfections of telescope. However, all these current and future systems focus on detecting faint planets around a single host star or unresolved binaries/multiples, while several targets or planet candidates are located around nearby binary stars such as our neighbor star Alpha Centauri.
Until now, it has been thought that removing the light of a companion star is impossible with the current technology, excluding binary star systems from target lists of direct imaging missions. Direct imaging around binaries or multiples systems at a level of contrast allowing Earth-like planets detection is challenging because the region of interest, where a dark zone is essential, is contaminated by the light coming from the host star's companion. We propose a method to simultaneously correct aberration sand diffraction of light coming from the target star. This method works even if the companion star is outside the control region of the DM (beyond its half-Nyquist frequency), by taking advantage of aliasing effects.
△ Less
Submitted 15 July, 2014;
originally announced July 2014.
-
Experimental study of a low-order wavefront sensor for high-contrast coronagraphic imagers: results in air and in vacuum
Authors:
Julien Lozi,
Ruslan Belikov,
Sandrine J. Thomas,
Eugene Pluzhnik,
Eduardo Bendek,
Olivier Guyon,
Glenn Schneider
Abstract:
For the technology development of the mission EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer) - a 0.7 m telescope equipped with a Phase-Induced Amplitude Apodization Coronagraph (PIAA-C) and a 2000-element MEMS deformable mirror, capable of raw contrasts of 1e-6 at 1.2 lambda/D and 1e-7 above 2 lambda/D - we developed two test benches simulating its key components, one in air, t…
▽ More
For the technology development of the mission EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer) - a 0.7 m telescope equipped with a Phase-Induced Amplitude Apodization Coronagraph (PIAA-C) and a 2000-element MEMS deformable mirror, capable of raw contrasts of 1e-6 at 1.2 lambda/D and 1e-7 above 2 lambda/D - we developed two test benches simulating its key components, one in air, the other in vacuum. To achieve this level of contrast, one of the main goals is to remove low-order aberrations, using a Low-Order WaveFront Sensor (LOWFS). We tested this key component, together with the coronagraph and the wavefront control, in air at NASA Ames Research Center and in vacuum at Lockheed Martin. The LOWFS, controlling tip/tilt modes in real time at 1~kHz, allowed us to reduce the disturbances in air to 1e-3 lambda/D rms, letting us achieve a contrast of 2.8e-7 between 1.2 and 2 lambda/D. Tests are currently being performed to achieve the same or a better level of correction in vacuum. With those results, and by comparing them to simulations, we are able to deduce its performances on different coronagraphs - different sizes of telescopes, inner working angles, contrasts, etc. - and therefore study its contribution beyond EXCEDE.
△ Less
Submitted 15 July, 2014;
originally announced July 2014.
-
Effects of differential wavefront sensor bias drifts on high contrast imaging
Authors:
Naru Sadakuni,
Bruce A. Macintosh,
David W. Palmer,
Lisa A. Poyneer,
Claire E. Max,
Dmitry Savransky,
Sandrine J. Thomas,
Andrew Cardwell,
Stephen Goodsell,
Markus Hartung,
Pascale Hibon,
Fredrik Rantakyrö,
Andrew Serio,
with the GPI team
Abstract:
The Gemini Planet Imager (GPI) is a new facility, extreme adaptive optics (AO), coronagraphic instrument, currently being integrated onto the 8-meter Gemini South telescope, with the ultimate goal of directly imaging extrasolar planets. To achieve the contrast required for the desired science, it is necessary to quantify and mitigate wavefront error (WFE). A large source of potential static WFE ar…
▽ More
The Gemini Planet Imager (GPI) is a new facility, extreme adaptive optics (AO), coronagraphic instrument, currently being integrated onto the 8-meter Gemini South telescope, with the ultimate goal of directly imaging extrasolar planets. To achieve the contrast required for the desired science, it is necessary to quantify and mitigate wavefront error (WFE). A large source of potential static WFE arises from the primary AO wavefront sensor (WFS) detector's use of multiple readout segments with independent signal chains including on-chip preamplifiers and external amplifiers. Temperature changes within GPI's electronics cause drifts in readout segments' bias levels, inducing an RMS WFE of 1.1 nm and 41.9 nm over 4.44 degrees Celsius, for magnitude 4 and 11 stars, respectively. With a goal of $<$2 nm of static WFE, these are significant enough to require remedial action. Simulations imply a requirement to take fresh WFS darks every 2 degrees Celsius of temperature change, for a magnitude 6 star; similarly, for a magnitude 7 star, every 1 degree Celsius of temperature change. For sufficiently dim stars, bias drifts exceed the signal, causing a large initial WFE, and the former periodic requirement practically becomes an instantaneous/continuous one, making the goal of $<$2 nm of static WFE very difficult for stars of magnitude 9 or fainter. In extreme cases, this can cause the AO loops to destabilize due to perceived nonphysical wavefronts, as some of the WFS's Shack-Hartmann quadcells are split between multiple readout segments. Presented here is GPI's AO WFS geometry, along with detailed steps in the simulation used to quantify bias drift related WFE, followed by laboratory and on sky results, and concluded with possible methods of remediation.
△ Less
Submitted 8 July, 2014;
originally announced July 2014.
-
The Integral Field Spectrograph for the Gemini Planet Imager
Authors:
James E. Larkin,
Jeffrey K. Chilcote,
Theodore Aliado,
Brian J. Bauman,
George Brims,
John M. Canfield,
Andrew Cardwell,
Daren Dillon,
René Doyon,
Jennifer Dunn,
Michael P. Fitzgerald,
James R. Graham,
Stephen Goodsell,
Markus Hartung,
Pascale Hibon,
Patrick Ingraham,
Christopher A Johnson,
Evan Kress,
Quinn M. Konopacky,
Bruce A. Macintosh,
Kenneth G. Magnone,
Jérôme Maire,
Ian S. McLean,
David Palmer,
Marshall D. Perrin
, et al. (9 additional authors not shown)
Abstract:
The Gemini Planet Imager (GPI) is a complex optical system designed to directly detect the self-emission of young planets within two arcseconds of their host stars. After suppressing the starlight with an advanced AO system and apodized coronagraph, the dominant residual contamination in the focal plane are speckles from the atmosphere and optical surfaces. Since speckles are diffractive in nature…
▽ More
The Gemini Planet Imager (GPI) is a complex optical system designed to directly detect the self-emission of young planets within two arcseconds of their host stars. After suppressing the starlight with an advanced AO system and apodized coronagraph, the dominant residual contamination in the focal plane are speckles from the atmosphere and optical surfaces. Since speckles are diffractive in nature their positions in the field are strongly wavelength dependent, while an actual companion planet will remain at fixed separation. By comparing multiple images at different wavelengths taken simultaneously, we can freeze the speckle pattern and extract the planet light adding an order of magnitude of contrast. To achieve a bandpass of 20%, sufficient to perform speckle suppression, and to observe the entire two arcsecond field of view at diffraction limited sampling, we designed and built an integral field spectrograph with extremely low wavefront error and almost no chromatic aberration. The spectrograph is fully cryogenic and operates in the wavelength range 1 to 2.4 microns with five selectable filters. A prism is used to produce a spectral resolution of 45 in the primary detection band and maintain high throughput. Based on the OSIRIS spectrograph at Keck, we selected to use a lenslet-based spectrograph to achieve an rms wavefront error of approximately 25 nm. Over 36,000 spectra are taken simultaneously and reassembled into image cubes that have roughly 192x192 spatial elements and contain between 11 and 20 spectral channels. The primary dispersion prism can be replaced with a Wollaston prism for dual polarization measurements. The spectrograph also has a pupil-viewing mode for alignment and calibration.
△ Less
Submitted 8 July, 2014;
originally announced July 2014.
-
Automated Alignment and On-Sky Performance of the Gemini Planet Imager Coronagraph
Authors:
Dmitry Savransky,
Sandrine J. Thomas,
Lisa A. Poyneer,
Jennifer Dunn,
Bruce A. Macintosh,
Naru Sadakuni,
Daren Dillon,
Stephen J. Goodsell,
Markus Hartung,
Pascale Hibon,
Fredrik Rantakyrö,
Andrew Cardwell,
Andrew Serio,
with the GPI team
Abstract:
The Gemini Planet Imager (GPI) is a next-generation, facility instrument currently being commissioned at the Gemini South observatory. GPI combines an extreme adaptive optics system and integral field spectrograph (IFS) with an apodized-pupil Lyot coronagraph (APLC) producing an unprecedented capability for directly imaging and spectroscopically characterizing extrasolar planets. GPI's operating g…
▽ More
The Gemini Planet Imager (GPI) is a next-generation, facility instrument currently being commissioned at the Gemini South observatory. GPI combines an extreme adaptive optics system and integral field spectrograph (IFS) with an apodized-pupil Lyot coronagraph (APLC) producing an unprecedented capability for directly imaging and spectroscopically characterizing extrasolar planets. GPI's operating goal of $10^{-7}$ contrast requires very precise alignments between the various elements of the coronagraph (two pupil masks and one focal plane mask) and active control of the beam path throughout the instrument. Here, we describe the techniques used to automatically align GPI and maintain the alignment throughout the course of science observations. We discuss the particular challenges of maintaining precision alignments on a Cassegrain mounted instrument and strategies that we have developed that allow GPI to achieve high contrast even in poor seeing conditions.
△ Less
Submitted 8 July, 2014;
originally announced July 2014.
-
Gemini Planet Imager Observational Calibrations VIII: Characterization and Role of Satellite Spots
Authors:
Jason J. Wang,
Abhijith Rajan,
James R. Graham,
Dmitry Savransky,
Patrick J. Ingraham,
Kimberly Ward-Duong,
Jennifer Patience,
Robert J. De Rosa,
Joanna Bulger,
Anand Sivaramakrishnan,
Marshall D. Perrin,
Sandrine J. Thomas,
Naru Sadakuni,
Alexandra Z. Greenbaum,
Laurent Pueyo,
Christian Marois,
Ben R. Oppenheimer,
Paul Kalas,
Andrew Cardwell,
Stephen Goodsell,
Pascale Hibon,
Fredrik T. Rantakyrö,
with the GPI team
Abstract:
The Gemini Planet Imager (GPI) combines extreme adaptive optics, an integral field spectrograph, and a high performance coronagraph to directly image extrasolar planets in the near-infrared. Because the coronagraph blocks most of the light from the star, it prevents the properties of the host star from being measured directly. Instead, satellite spots, which are created by diffraction from a squar…
▽ More
The Gemini Planet Imager (GPI) combines extreme adaptive optics, an integral field spectrograph, and a high performance coronagraph to directly image extrasolar planets in the near-infrared. Because the coronagraph blocks most of the light from the star, it prevents the properties of the host star from being measured directly. Instead, satellite spots, which are created by diffraction from a square grid in the pupil plane, can be used to locate the star and extract its spectrum. We describe the techniques implemented into the GPI Data Reduction Pipeline to measure the properties of the satellite spots and discuss the precision of the reconstructed astrometry and spectrophotometry of the occulted star. We find the astrometric precision of the satellite spots in an $H$-band datacube to be $0.05$ pixels and is best when individual satellite spots have a signal to noise ratio (SNR) of $> 20$. In regards to satellite spot spectrophotometry, we find that the total flux from the satellite spots is stable to $\sim 7\%$ and scales linearly with central star brightness and that the shape of the satellite spot spectrum varies on the $2\%$ level.
△ Less
Submitted 8 July, 2014;
originally announced July 2014.
-
Gemini Planet Imager Observational Calibrations VII: On-Sky Polarimetric Performance of the Gemini Planet Imager
Authors:
Sloane J. Wiktorowicz,
Max Millar-Blanchaer,
Marshall D. Perrin,
James R. Graham,
Michael P. Fitzgerald,
Jérôme Maire,
Patrick Ingraham,
Dmitry Savransky,
Bruce A. Macintosh,
Sandrine J. Thomas,
Jeffrey K. Chilcote,
Zachary H. Draper,
Inseok Song,
Andrew Cardwell,
Stephen J. Goodsell,
Markus Hartung,
Pascale Hibon,
Fredrik Rantakyrö,
Naru Sadakuni,
the GPI team
Abstract:
We present on-sky polarimetric observations with the Gemini Planet Imager (GPI) obtained at straight Cassegrain focus on the Gemini South 8-m telescope. Observations of polarimetric calibrator stars, ranging from nearly unpolarized to strongly polarized, enable determination of the combined telescope and instrumental polarization. We find the conversion of Stokes $I$ to linear and circular instrum…
▽ More
We present on-sky polarimetric observations with the Gemini Planet Imager (GPI) obtained at straight Cassegrain focus on the Gemini South 8-m telescope. Observations of polarimetric calibrator stars, ranging from nearly unpolarized to strongly polarized, enable determination of the combined telescope and instrumental polarization. We find the conversion of Stokes $I$ to linear and circular instrumental polarization in the instrument frame to be $I \rightarrow (Q_{\rm IP}, U_{\rm IP}, P_{\rm IP}, V_{\rm IP}) = (-0.037 \pm 0.010\%, +0.4338 \pm 0.0075\%, 0.4354 \pm 0.0075\%, -6.64 \pm 0.56\%)$. Such precise measurement of instrumental polarization enables $\sim 0.1\%$ absolute accuracy in measurements of linear polarization, which together with GPI's high contrast will allow GPI to explore scattered light from circumstellar disk in unprecedented detail, conduct observations of a range of other astronomical bodies, and potentially even study polarized thermal emission from young exoplanets. Observations of unpolarized standard stars also let us quantify how well GPI's differential polarimetry mode can suppress the stellar PSF halo. We show that GPI polarimetry achieves cancellation of unpolarized starlight by factors of 100-200, reaching the photon noise limit for sensitivity to circumstellar scattered light for all but the smallest separations at which the calibration for instrumental polarization currently sets the limit.
△ Less
Submitted 8 July, 2014;
originally announced July 2014.
-
Gemini Planet Imager Observational Calibrations VI: Photometric and Spectroscopic Calibration for the Integral Field Spectrograph
Authors:
Jérôme Maire,
Patrick J. Ingraham,
Robert J. De Rosa,
Marshall D. Perrin,
Abhijith Rajan,
Dmitry Savransky,
Jason J. Wang,
Jean-Baptiste Ruffio,
Schuyler G. Wolff,
Jeffrey K. Chilcote,
René Doyon,
James R. Graham,
Alexandra Z. Greenbaum,
Quinn M. Konopacky,
James E. Larkin,
Bruce A. Macintosh,
Christian Marois,
Max Millar-Blanchaer,
Jennifer Patience,
Laurent A. Pueyo,
Anand Sivaramakrishnan,
Sandrine J. Thomas,
Jason L. Weiss
Abstract:
The Gemini Planet Imager (GPI) is a new facility instrument for the Gemini Observatory designed to provide direct detection and characterization of planets and debris disks around stars in the solar neighborhood. In addition to its extreme adaptive optics and corona graphic systems which give access to high angular resolution and high-contrast imaging capabilities, GPI contains an integral field s…
▽ More
The Gemini Planet Imager (GPI) is a new facility instrument for the Gemini Observatory designed to provide direct detection and characterization of planets and debris disks around stars in the solar neighborhood. In addition to its extreme adaptive optics and corona graphic systems which give access to high angular resolution and high-contrast imaging capabilities, GPI contains an integral field spectrograph providing low resolution spectroscopy across five bands between 0.95 and 2.5 $μ$m. This paper describes the sequence of processing steps required for the spectro-photometric calibration of GPI science data, and the necessary calibration files. Based on calibration observations of the white dwarf HD 8049B we estimate that the systematic error in spectra extracted from GPI observations is less than 5%. The flux ratio of the occulted star and fiducial satellite spots within coronagraphic GPI observations, required to estimate the magnitude difference between a target and any resolved companions, was measured in the $H$-band to be $Δm = 9.23\pm0.06$ in laboratory measurements and $Δm = 9.39\pm 0.11$ using on-sky observations. Laboratory measurements for the $Y$, $J$, $K1$ and $K2$ filters are also presented. The total throughput of GPI, Gemini South and the atmosphere of the Earth was also measured in each photometric passband, with a typical throughput in $H$-band of 18% in the non-coronagraphic mode, with some variation observed over the six-month period for which observations were available. We also report ongoing development and improvement of the data cube extraction algorithm.
△ Less
Submitted 8 July, 2014;
originally announced July 2014.
-
Gemini Planet Imager Observational Calibrations V: Astrometry and Distortion
Authors:
Quinn M. Konopacky,
Sandrine J. Thomas,
Bruce A. Macintosh,
Daren Dillon,
Naru Sadakuni,
Jérôme Maire,
Michael Fitzgerald,
Sasha Hinkley,
Paul Kalas,
Thomas Esposito,
Christian Marois,
Patrick J. Ingraham,
Franck Marchis,
Marshall D. Perrin,
James R. Graham,
Jason J. Wang,
Robert J. De Rosa,
Katie Morzinski,
Laurent Pueyo,
Jeffrey K. Chilcote,
James E. Larkin,
Daniel Fabrycky,
Stephen J. Goodsell,
B. R. Oppenheimer,
Jenny Patience
, et al. (2 additional authors not shown)
Abstract:
We present the results of both laboratory and on sky astrometric characterization of the Gemini Planet Imager (GPI). This characterization includes measurement of the pixel scale of the integral field spectrograph (IFS), the position of the detector with respect to north, and optical distortion. Two of these three quantities (pixel scale and distortion) were measured in the laboratory using two tr…
▽ More
We present the results of both laboratory and on sky astrometric characterization of the Gemini Planet Imager (GPI). This characterization includes measurement of the pixel scale of the integral field spectrograph (IFS), the position of the detector with respect to north, and optical distortion. Two of these three quantities (pixel scale and distortion) were measured in the laboratory using two transparent grids of spots, one with a square pattern and the other with a random pattern. The pixel scale in the laboratory was also estimate using small movements of the artificial star unit (ASU) in the GPI adaptive optics system. On sky, the pixel scale and the north angle are determined using a number of known binary or multiple systems and Solar System objects, a subsample of which had concurrent measurements at Keck Observatory. Our current estimate of the GPI pixel scale is 14.14 $\pm$ 0.01 millarcseconds/pixel, and the north angle is -1.00 $\pm$ 0.03$°$. Distortion is shown to be small, with an average positional residual of 0.26 pixels over the field of view, and is corrected using a 5th order polynomial. We also present results from Monte Carlo simulations of the GPI Exoplanet Survey (GPIES) assuming GPI achieves ~1 milliarcsecond relative astrometric precision. We find that with this precision, we will be able to constrain the eccentricities of all detected planets, and possibly determine the underlying eccentricity distribution of widely separated Jovians.
△ Less
Submitted 8 July, 2014;
originally announced July 2014.
-
Experimental study of a low-order wavefront sensor for a high-contrast coronagraphic imager at 1.2 lambda/D
Authors:
Julien Lozi,
Ruslan Belikov,
Glenn Schneider,
Olivier Guyon,
EugenePluzhnik,
Sandrine J. Thomas,
Frantz Martinache
Abstract:
High-contrast imaging will be a challenge for future ELTs, because their vibrations create low-order aberrations - mostly tip/tilt - that reduce coronagraphic performances at 1.2 lambda/D and above. A Low-Order WaveFront Sensor (LOWFS) is essential to measure and control those aberrations. An experiment simulating a starlight suppression system is currently developed at NASA Ames Research Center,…
▽ More
High-contrast imaging will be a challenge for future ELTs, because their vibrations create low-order aberrations - mostly tip/tilt - that reduce coronagraphic performances at 1.2 lambda/D and above. A Low-Order WaveFront Sensor (LOWFS) is essential to measure and control those aberrations. An experiment simulating a starlight suppression system is currently developed at NASA Ames Research Center, and includes a LOWFS controlling tip/tilt modes in real-time at 500 Hz. The LOWFS allowed us to reduce the tip/tilt disturbances to 1e-3 lambda/D rms, enhancing the previous contrast by a decade, to 8e-7 between 1.2 and 2 lambda/D. A Linear Quadratic Gaussian (LQG) controller is currently implemented to improve even more that result by reducing residual vibrations. This testbed is developed for the mission EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer), selected by NASA for technology development, and designed to study the formation, evolution and architectures of exoplanetary systems and characterize circumstellar environments into stellar habitable zones. It is composed of a 0.7 m telescope equipped with a Phase-Induced Amplitude Apodization Coronagraph (PIAA-C) and a 2000-element MEMS deformable mirror, capable of raw contrasts of 1e-6 at 1.2 lambda/D and 1e-7 above 2 lambda/D. Although the testbed simulates space conditions, its LOWFS has the same design than on the SCExAO instrument at Subaru telescope, with whom it shares the same kind of problematic. Experimental results show that a good knowledge of the low-order disturbances is a key asset for high contrast imaging, whether for real-time control or for post processing, both in space and on ground telescopes.
△ Less
Submitted 17 October, 2013;
originally announced October 2013.
-
Experimental study of a low-order wavefront sensor for the high-contrast coronagraphic imager EXCEDE
Authors:
Julien Lozi,
Ruslan Belikov,
Glenn Schneider,
Olivier Guyon,
Eugene Pluzhnik,
Sandrine J. Thomas,
Frantz Martinache
Abstract:
The mission EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer), selected by NASA for technology development, is designed to study the formation, evolution and architectures of exoplanetary systems and characterize circumstellar environments into stellar habitable zones. It is composed of a 0.7 m telescope equipped with a Phase-Induced Amplitude Apodization Coronagraph (PIAA-C) and…
▽ More
The mission EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer), selected by NASA for technology development, is designed to study the formation, evolution and architectures of exoplanetary systems and characterize circumstellar environments into stellar habitable zones. It is composed of a 0.7 m telescope equipped with a Phase-Induced Amplitude Apodization Coronagraph (PIAA-C) and a 2000-element MEMS deformable mirror, capable of raw contrasts of 1e-6 at 1.2 lambda/D and 1e-7 above 2 lambda/D. One of the key challenges to achieve those contrasts is to remove low-order aberrations, using a Low-Order WaveFront Sensor (LOWFS). An experiment simulating the starlight suppression system is currently developed at NASA Ames Research Center, and includes a LOWFS controlling tip/tilt modes in real time at 500 Hz. The LOWFS allowed us to reduce the tip/tilt disturbances to 1e-3 lambda/D rms, enhancing the previous contrast by a decade, to 8e-7 between 1.2 and 2 lambda/D. A Linear Quadratic Gaussian (LQG) controller is currently implemented to improve even more that result by reducing residual vibrations. This testbed shows that a good knowledge of the low-order disturbances is a key asset for high contrast imaging, whether for real-time control or for post processing.
△ Less
Submitted 6 September, 2013;
originally announced September 2013.
-
Computer vision applications for coronagraphic optical alignment and image processing
Authors:
Dmitry Savransky,
Sandrine J. Thomas,
Lisa A. Poyneer,
Bruce A. Macintosh
Abstract:
Modern coronagraphic systems require very precise alignment between optical components and can benefit greatly from automated image processing. We discuss three techniques commonly employed in the fields of computer vision and image analysis as applied to the Gemini Planet Imager, a new facility instrument for the Gemini South Observatory. We describe how feature extraction and clustering methods…
▽ More
Modern coronagraphic systems require very precise alignment between optical components and can benefit greatly from automated image processing. We discuss three techniques commonly employed in the fields of computer vision and image analysis as applied to the Gemini Planet Imager, a new facility instrument for the Gemini South Observatory. We describe how feature extraction and clustering methods can be used to aid in automated system alignment tasks, and also present a search algorithm for finding regular features in science images used for calibration and data processing. Along with discussions of each technique, we present our specific implementation and show results of each one in operation.
△ Less
Submitted 8 May, 2013;
originally announced May 2013.
