-
Mission Design of DESTINY+: Toward Active Asteroid (3200) Phaethon and Multiple Small Bodies
Authors:
Naoya Ozaki,
Takayuki Yamamoto,
Ferran Gonzalez-Franquesa,
Roger Gutierrez-Ramon,
Nishanth Pushparaj,
Takuya Chikazawa,
Diogene Alessandro Dei Tos,
Onur Çelik,
Nicola Marmo,
Yasuhiro Kawakatsu,
Tomoko Arai,
Kazutaka Nishiyama,
Takeshi Takashima
Abstract:
DESTINY+ is an upcoming JAXA Epsilon medium-class mission to fly by the Geminids meteor shower parent body (3200) Phaethon. It will be the world's first spacecraft to escape from a near-geostationary transfer orbit into deep space using a low-thrust propulsion system. In doing so, DESTINY+ will demonstrate a number of technologies that include a highly efficient ion engine system, lightweight sola…
▽ More
DESTINY+ is an upcoming JAXA Epsilon medium-class mission to fly by the Geminids meteor shower parent body (3200) Phaethon. It will be the world's first spacecraft to escape from a near-geostationary transfer orbit into deep space using a low-thrust propulsion system. In doing so, DESTINY+ will demonstrate a number of technologies that include a highly efficient ion engine system, lightweight solar array panels, and advanced asteroid flyby observation instruments. These demonstrations will pave the way for JAXA's envisioned low-cost, high-frequency space exploration plans. Following the Phaethon flyby observation, DESTINY+ will visit additional asteroids as its extended mission. The mission design is divided into three phases: a spiral-shaped apogee-raising phase, a multi-lunar-flyby phase to escape Earth, and an interplanetary and asteroids flyby phase. The main challenges include the optimization of the many-revolution low-thrust spiral phase under operational constraints; the design of a multi-lunar-flyby sequence in a multi-body environment; and the design of multiple asteroid flybys connected via Earth gravity assists. This paper shows a novel, practical approach to tackle these complex problems, and presents feasible solutions found within the mass budget and mission constraints. Among them, the baseline solution is shown and discussed in depth; DESTINY+ will spend two years raising its apogee with ion engines, followed by four lunar gravity assists, and a flyby of asteroids (3200) Phaethon and (155140) 2005 UD. Finally, the flight operations plan for the spiral phase and the asteroid flyby phase are presented in detail.
△ Less
Submitted 14 April, 2022; v1 submitted 6 January, 2022;
originally announced January 2022.
-
Current status and future plan of Osaka Prefecture University 1.85-m mm-submm telescope project
Authors:
Atsushi Nishimura,
Kazuki Tokuda,
Ryohei Harada,
Yutaka Hasegawa,
Shota Ueda,
Sho Masui,
Ryotaro Konishi,
Yasumasa Yamasaki,
Hiroshi Kondo,
Koki Yokoyama,
Takeru Matsumoto,
Taisei Minami,
Masanari Okawa,
Shinji Fujita,
Ayu Konishi,
Yuka Nakao,
Shimpei Nishimoto,
Sana Kawashita,
Sho Yoneyama,
Tatsuyuki Takashima,
Kenta Goto,
Nozomi Okada,
Kimihiro Kimura,
Yasuhiro Abe,
Kazuyuki Muraoka
, et al. (3 additional authors not shown)
Abstract:
We report the current status of the 1.85-m mm-submm telescope installed at the Nobeyama Radio Observatory (altitude 1400 m) and the future plan. The scientific goal is to reveal the physical/chemical properties of molecular clouds in the Galaxy by obtaining large-scale distributions of molecular gas with an angular resolution of several arcminutes. A semi-automatic observation system created mainl…
▽ More
We report the current status of the 1.85-m mm-submm telescope installed at the Nobeyama Radio Observatory (altitude 1400 m) and the future plan. The scientific goal is to reveal the physical/chemical properties of molecular clouds in the Galaxy by obtaining large-scale distributions of molecular gas with an angular resolution of several arcminutes. A semi-automatic observation system created mainly in Python on Linux-PCs enables effective operations. A large-scale CO $J=$2--1 survey of the molecular clouds (e.g., Orion-A/B, Cygnus-X/OB7, Taurus-California-Perseus complex, and Galactic Plane), and a pilot survey of emission lines from minor molecular species toward Orion clouds have been conducted so far. The telescope also is providing the opportunities for technical demonstrations of new devices and ideas. For example, the practical realizations of PLM (Path Length Modulator) and waveguide-based sideband separating filter, installation of the newly designed waveguide-based circular polarizer and OMT (Orthomode Transducer), and so on. As the next step, we are now planning to relocate the telescope to San Pedro de Atacama in Chile (altitude 2500 m), and are develo** very wideband receiver covering 210--375 GHz (corresponding to Bands 6--7 of ALMA) and full-automatic observation system. The new telescope system will provide large-scale data in the spatial and frequency domain of molecular clouds of Galactic plane and Large/Small Magellanic Clouds at the southern hemisphere. The data will be precious for the comparison with those of extra-galactic ones that will be obtained with ALMA as the Bands 6/7 are the most efficient frequency bands for the surveys in extra-galaxies for ALMA.
△ Less
Submitted 1 December, 2020;
originally announced December 2020.
-
A low-velocity bipolar outflow from a deeply embedded object in Taurus revealed by the Atacama Compact Array
Authors:
Kakeru Fujishiro,
Kazuki Tokuda,
Kengo Tachihara,
Tatsuyuki Takashima,
Yasuo Fukui,
Sarolta Zahorecz,
Kazuya Saigo,
Tomoaki Matsumoto,
Kengo Tomida,
Masahiro N. Machida,
Shu-ichiro Inutsuka,
Philippe André,
Akiko Kawamura,
Toshikazu Onishi
Abstract:
The first hydrostatic core, the first quasi-hydrostatic object formed during the star formation process, is still the observational missing link between the prestellar and protostellar phases, mainly due to its short lifetime. Although we have not established a clear method to identify this rare object, recent theoretical studies predict that the first core has millimeter continuum emission and lo…
▽ More
The first hydrostatic core, the first quasi-hydrostatic object formed during the star formation process, is still the observational missing link between the prestellar and protostellar phases, mainly due to its short lifetime. Although we have not established a clear method to identify this rare object, recent theoretical studies predict that the first core has millimeter continuum emission and low-velocity outflow with a wide opening angle. An extensive continuum/outflow survey toward a large number of $"$starless$"$ cores in nearby star-forming regions works as a pathfinder. We observed 32 prestellar cores in Taurus with an average density of $\gtrsim$10$^5$ cm$^{-3}$ in 1.3 mm continuum and molecular lines using the Atacama Large Millimeter/submillimeter Array$-$Atacama Compact Array (ALMA$-$ACA) stand-alone mode. Among the targets, MC35-mm centered at one of the densest $"$starless$"$ cores in Taurus has blueshifted/redshifted wings in the $^{12}$CO (2-1) line, indicating that there is deeply embedded object driving molecular outflow. The observed velocities and sizes of the possible outflow lobes are 2-4 km s$^{-1}$, and $\sim$2 $\times$10$^3$ au, respectively, and the dynamical time is calculated to be $\sim$10$^3$ yr. In addition to this, the core is one of the strongest N$_2$D$^{+}$ (3-2) emitters in our sample. All of the observed signatures do not conflict with any of the theoretical predictions about the first hydrostatic core so far, and thus MC35-mm is unique as the only first-core candidate in the Taurus molecular cloud.
△ Less
Submitted 18 July, 2020; v1 submitted 11 June, 2020;
originally announced June 2020.
-
FRagmentation and Evolution of dense cores Judged by ALMA (FREJA). I (Overview). Inner $\sim$1000 au structures of prestellar/protostellar cores in Taurus
Authors:
Kazuki Tokuda,
Kakeru Fujishiro,
Kengo Tachihara,
Tatsuyuki Takashima,
Yasuo Fukui,
Sarolta Zahorecz,
Kazuya Saigo,
Tomoaki Matsumoto,
Kengo Tomida,
Masahiro N. Machida,
Shu-ichiro Inutsuka,
Philippe André,
Akiko Kawamura,
Toshikazu Onishi
Abstract:
We have performed survey-type observations in 1 mm continuum and molecular lines toward dense cores (32 prestellar + 7 protostellar) with an average density of $\gtrsim$10$^5$ cm$^{-3}$ in the Taurus molecular clouds using the Atacama Large Millimeter/submillimeter Array-Atacama Compact Array (ALMA-ACA) stand-alone mode with an angular resolution of 6.$''$5 ($\sim$900 au). The primary purpose of t…
▽ More
We have performed survey-type observations in 1 mm continuum and molecular lines toward dense cores (32 prestellar + 7 protostellar) with an average density of $\gtrsim$10$^5$ cm$^{-3}$ in the Taurus molecular clouds using the Atacama Large Millimeter/submillimeter Array-Atacama Compact Array (ALMA-ACA) stand-alone mode with an angular resolution of 6.$''$5 ($\sim$900 au). The primary purpose of this study is to investigate the innermost part of dense cores toward understanding the initial condition of star formation. In the protostellar cores, contributions from protostellar disks dominate the observed continuum flux with a range of 35-90% except for the very low-luminosity object. For the prestellar cores, we have successfully confirmed continuum emission from dense gas with a density of $\gtrsim$3 $\times$10$^5$ cm$^{-3}$ toward approximately one-third of the targets. Thanks to the lower spatial frequency coverage with the ACA-7 m array, the detection rate is significantly higher than that of the previous surveys, which have 0 or 1 continuum detected sources among large number of starless samples using the ALMA Main array. The statistical counting method tells us that the lifetime of the prestellar cores until protostar formation therein approaches the free-fall time as the density increases. Among the prestellar cores, at least two targets have possible internal substructures, which are detected in continuum emission with the size scale of $\sim$1000 au if we consider the molecular line (C$^{18}$O and N$_2$D$^{+}$) distributions. These results suggest that small-scale fragmentation/coalescence processes occur in a region smaller than 0.1 pc, which may determine the final core mass associated with individual protostar formation before starting the dynamical collapse of the core with central density of $\sim$(0.3-1) $\times$ 10$^6$ cm$^{-3}$.
△ Less
Submitted 29 July, 2020; v1 submitted 11 June, 2020;
originally announced June 2020.
-
A centrally concentrated sub-solar mass starless core in the Taurus L1495 filamentary complex
Authors:
Kazuki Tokuda,
Kengo Tachihara,
Kazuya Saigo,
Phillipe André,
Yosuke Miyamoto,
Sarolta Zahorecz,
Shu-ichiro Inutsuka,
Tomoaki Matsumoto,
Tatsuyuki Takashima,
Masahiro N. Machida,
Kengo Tomida,
Kotomi Taniguchi,
Yasuo Fukui,
Akiko Kawamura,
Ken'ichi Tatematsu,
Ryo Kandori,
Toshikazu Onishi
Abstract:
The formation scenario of brown dwarfs is still unclear because observational studies to investigate its initial condition are quite limited. Our systematic survey of nearby low-mass star-forming regions using the Atacama Compact Array (aka Morita array) and the IRAM 30 m telescope in 1.2 mm continuum has identified a centrally concentrated starless condensation with a central H$_2$ volume density…
▽ More
The formation scenario of brown dwarfs is still unclear because observational studies to investigate its initial condition are quite limited. Our systematic survey of nearby low-mass star-forming regions using the Atacama Compact Array (aka Morita array) and the IRAM 30 m telescope in 1.2 mm continuum has identified a centrally concentrated starless condensation with a central H$_2$ volume density of $\sim$10$^6$ cm$^{-3}$, MC5-N, connected to a narrow (width $\sim$0.03 pc) filamentary cloud in the Taurus L1495 region. The mass of the core is $\sim$0.2-0.4 $M_{\odot}$, which is an order of magnitude smaller than typical low-mass prestellar cores. Taking into account a typical core to star formation efficiency for prestellar cores ($\sim$20%-40%) in nearby molecular clouds, brown dwarf(s) or very low-mass star(s) may be going to be formed in this core. We have found possible substructures at the high-density portion of the core, although much higher angular resolution observation is needed to clearly confirm them. The subsequent N$_2$H$^+$ and N$_2$D$^+$ observations using the Nobeyama 45 m telescope have confirmed the high-deuterium fractionation ($\sim$30%). These dynamically and chemically evolved features indicate that this core is on the verge of proto-brown dwarf or very low-mass star formation and is an ideal source to investigate the initial conditions of such low-mass objects via gravitational collapse and/or fragmentation of the filamentary cloud complex.
△ Less
Submitted 10 May, 2019; v1 submitted 10 April, 2019;
originally announced April 2019.
-
The Design of Diamond Compton Telescope
Authors:
Kinya Hibino,
Toshisuke Kashiwagi,
Shoji Okuno,
Kaori Yajima,
Yukio Uchihori,
Hisashi Kitamura,
Takeshi Takashima,
Mamoru Yokota,
Kenji Yoshida
Abstract:
We have developed radiation detectors using the new synthetic diamonds. The diamond detector has an advantage for observations of "low/medium" energy gamma rays as a Compton telescope. The primary advantage of the diamond detector can reduce the photoelectric effect in the low energy range, which is background noise for tracking of the Compton recoil electron. A concept of the Diamond Compton Te…
▽ More
We have developed radiation detectors using the new synthetic diamonds. The diamond detector has an advantage for observations of "low/medium" energy gamma rays as a Compton telescope. The primary advantage of the diamond detector can reduce the photoelectric effect in the low energy range, which is background noise for tracking of the Compton recoil electron. A concept of the Diamond Compton Telescope (DCT) consists of position sensitive layers of diamond-striped detector and calorimeter layer of CdTe detector. The key part of the DCT is diamond-striped detectors with a higher positional resolution and a wider energy range from 10 keV to 10 MeV. However, the diamond-striped detector is under development. We describe the performance of prototype diamond detector and the design of a possible DCT evaluated by Monte Carlo simulations.
△ Less
Submitted 23 July, 2007;
originally announced July 2007.
-
Comparative study of the inial spikes of SGR giant flares in 1998 and 2004 observed with GEOTAIL: Do magnetospheric instabilities trigger large scale fracturing of magnetar's crust?
Authors:
Y. T. Tanaka,
T. Terasawa,
N. Kawai,
A. Yoshida,
I. Yoshikawa,
Y. Saito,
T. Takashima,
T. Mukai
Abstract:
We present the unsaturated peak profile of SGR 1900+14 giant flare on 1998 August 27. This was obtained by particle counters of the Low Energy Particle instrument onboard the GEOTAIL spacecraft. The observed peak profile revealed four characteristic structures: initial steep rise, intermediate rise to the peak, exponential decay and small hump in the decay phase. From this light curve, we found…
▽ More
We present the unsaturated peak profile of SGR 1900+14 giant flare on 1998 August 27. This was obtained by particle counters of the Low Energy Particle instrument onboard the GEOTAIL spacecraft. The observed peak profile revealed four characteristic structures: initial steep rise, intermediate rise to the peak, exponential decay and small hump in the decay phase. From this light curve, we found that the isotropic peak luminosity was $2.3\times10^{46}$ erg s$^{-1}$ and the total energy was $4.3 \times 10^{44}$ erg s$^{-1}$ ($E\gtrsim$ 50 keV), assuming that the distance to SGR 1900+14 is 15 kpc and that the spectrum is optically thin thermal bremsstrahlung with $kT =$ 240 keV. These are consistent with the previously reported lower limits derived from Ulysses and Konus-Wind observations. A comparative study of the initial spikes of SGR 1900+14 giant flare in 1998 and SGR 1806-20 in 2004 is also presented. The timescale of the initial steep rise shows the magnetospheric origin, while the timescale of the intermediate rise to the peak indicates that it originates from the crustal fracturing. Finally, we argue that the four structures and their corresponding timescales provide a clue to identify extragalactic SGR giant flares among short GRBs.
△ Less
Submitted 21 June, 2007;
originally announced June 2007.
-
GEOTAIL observation of the SGR1806-20 Giant Flare: The first 600 ms
Authors:
Toshio Terasawa,
Yasuyuki Tanaka,
Yasuhiro Takei,
Nobuyuki Kawai,
Atsumasa Yoshida,
Ken'ichi Nomoto,
Ichiro Yoshikawa,
Yoshifumi Saito,
Yasumasa Kasaba,
Takeshi Takashima,
Toshifumi Mukai,
Hirotomo Noda,
Toshio Murakami,
Kyoko Watanabe,
Yasushi Muraki,
Takaaki Yokoyama,
Masahiro Hoshino
Abstract:
On December 27, 2004, plasma particle detectors on the GEOTAIL spacecraft detected an extremely strong signal of hard X-ray photons from the giant flare of SGR1806-20, a magnetar candidate. While practically all gamma-ray detectors on any satellites were saturated during the first ~500 ms interval after the onset, one of the particle detectors on GEOTAIL was not saturated and provided unique mea…
▽ More
On December 27, 2004, plasma particle detectors on the GEOTAIL spacecraft detected an extremely strong signal of hard X-ray photons from the giant flare of SGR1806-20, a magnetar candidate. While practically all gamma-ray detectors on any satellites were saturated during the first ~500 ms interval after the onset, one of the particle detectors on GEOTAIL was not saturated and provided unique measurements of the hard X-ray intensity and the profile for the first 600 ms interval with 5.48 ms time resolution. After ~50 ms from the initial rapid onset, the peak photon flux (integrated above ~50 keV) reached the order of 10^7 photons sec^{-1} cm^{-2}. Assuming a blackbody spectrum with kT=175 keV, we estimate the peak energy flux to be 21 erg sec^{-1} cm^{-2} and the fluence (for 0-600 ms) to be 2.4 erg cm^{-2}. The implied energy release comparable to the magnetic energy stored in a magnetar (~10^{47} erg) suggests an extremely efficient energy release mechanism.
△ Less
Submitted 18 April, 2005; v1 submitted 16 February, 2005;
originally announced February 2005.
-
A Prototype Si/CdTe Compton Camera and the Polarization Measurement
Authors:
Takefumi Mitani,
Takaaki Tanaka,
Kazuhiro Nakazawa,
Tadayuki Takahashi,
Takeshi Takashima,
Hiroyasu Tajima,
Hidehito Nakamura,
Masaharu Nomachi,
Tatsuya Nakamoto,
Yasushi Fukazawa
Abstract:
A Compton camera is the most promising approach for gamma-ray detection in the energy region from several hundred keV to MeV, especially for application in high energy astrophysics. In order to obtain good angular resolution, semiconductor detectors such as silicon, germanium and cadmium telluride(CdTe) have several advantages over scintillation detectors, which have been used so far. Based on t…
▽ More
A Compton camera is the most promising approach for gamma-ray detection in the energy region from several hundred keV to MeV, especially for application in high energy astrophysics. In order to obtain good angular resolution, semiconductor detectors such as silicon, germanium and cadmium telluride(CdTe) have several advantages over scintillation detectors, which have been used so far. Based on the recent advances of high resolution CdTe and silicon imaging detectors, we are working on a Si/CdTe Compton camera. We have developed 64-pixel CdTe detectors with a pixel size of 2mmx2mm and double-sided Si strip detectors(DSSDs) with a position resolution of 800 micron. As a prototype Si/CdTe Compton camera, we use a DSSD as a scatterer and two CdTe pixel detectors as an absorber. In order to verify its performance, we irradiate the camera with 100% linearly polarised 170keV gamma-rays and demonstrate the system works properly as a Compton camera. The resolution of the reconstructed scattering angle is 22 degrees(FWHM). Measurement of polarization is also reported. The polarimetric modulation factor is obtained to be 43%, which is consistent with the prediction of Monte Carlo simulations.
△ Less
Submitted 5 October, 2004;
originally announced October 2004.
