Showing 1–36 of 36 results for author: Taffoni, G

A three-component giant radio halo: the puzzling case of the galaxy cluster Abell 2142

Authors: L. Bruno, A. Botteon, T. Shimwell, V. Cuciti, F. de Gasperin, G. Brunetti, D. Dallacasa, F. Gastaldello, M. Rossetti, R. J. van Weeren, T. Venturi, S. A. Russo, G. Taffoni, R. Cassano, N. Biava, G. Lusetti, A. Bonafede, S. Ghizzardi, S. De Grandi

Abstract: Turbulence introduced into the intra-cluster medium (ICM) through cluster merger events transfers energy to non-thermal components, and can trigger the formation of diffuse synchrotron radio sources. Typical diffuse sources in the forms of giant radio halos and mini-halos are found in merging and relaxed cool core galaxy clusters, respectively. On the other hand, recent observations have revealed… ▽ More Turbulence introduced into the intra-cluster medium (ICM) through cluster merger events transfers energy to non-thermal components, and can trigger the formation of diffuse synchrotron radio sources. Typical diffuse sources in the forms of giant radio halos and mini-halos are found in merging and relaxed cool core galaxy clusters, respectively. On the other hand, recent observations have revealed an increasing complexity of the non-thermal phenomenology. Abell 2142 (A2142) is a mildly disturbed cluster that exhibits uncommon thermal and non-thermal properties. It is known to host a hybrid halo consisting of two components (H1 and H2), namely a mini-halo-like and an enigmatic elongated radio halo-like structure. We aim to investigate the properties, origin, and connections of each component. We present deep LOFAR observations of A2142 in the frequency ranges $30-78$ MHz and $120-168$ MHz. With complementary multi-frequency radio and X-ray data, we analyse the radio spectral properties of the halo and assess the connection between the non-thermal and thermal components of the ICM. We detected a third radio component (H3), which extends over the cluster volume on scales $\sim 2$ Mpc, embeds H1 and H2, and has a morphology that roughly follows the thermal ICM distribution. The radio spectral index is moderately steep in H1 ($α=1.09\pm 0.02$) and H2 ($α=1.15\pm 0.02$), but is steeper ($α=1.57\pm 0.20$) in H3. The analysis of the thermal and non-thermal properties allowed us to discuss possible formation scenarios for each radio component. Turbulence from sloshing motions of low-entropy gas on different scales may be responsible for the origin of H1 and H2. We classified H3 as a giant ultra-steep spectrum radio halo, which could trace the residual activity from an old energetic merger and/or inefficient turbulent re-acceleration induced by ongoing minor mergers. △ Less

Submitted 15 August, 2023; originally announced August 2023.

Comments: 24 pages (including Appendix), 15 Figures (plus 4 Figures in Appendix), Accepted for publication by A&A

Journal ref: A&A 678, A133 (2023)

Requirements analysis for HPC\&HTC infrastructures integration in ESCAPE Science Analysis Platform

Authors: S. Bertocco, D. Goz, S. A. Russo, M. Moliaro, G. Taffoni

Abstract: ESCAPE (European Science Cluster of Astronomy and Particle physics ESFRI research infrastructures) is a project to set up a cluster of ESFRI (European Strategy Forum on Research Infrastructures) facilities for astronomy, astroparticle and particle physics to face the challenges emerging through the modern multi-disciplinary data driven science. One of the main goal of ESCAPE is the building of ESA… ▽ More ESCAPE (European Science Cluster of Astronomy and Particle physics ESFRI research infrastructures) is a project to set up a cluster of ESFRI (European Strategy Forum on Research Infrastructures) facilities for astronomy, astroparticle and particle physics to face the challenges emerging through the modern multi-disciplinary data driven science. One of the main goal of ESCAPE is the building of ESAP (ESFRI Science Analysis Platform), a science platform for the analysis of open access data available through the EOSC (European Open Science Cloud) environment. ESAP will allow EOSC researchers to identify and stage existing data collections for analysis, share data, share and run scientific workflows. For many of the concerned ESFRIs and RIs, the data scales involved require significant computational resources (storage and compute) to support processing and analysis. The EOSC-ESFRI science platform therefore must implement appropriate interfaces to an underlying HPC (High Performance Computing) or HTC (High Throughput Computing) infrastructure to take advantage of it. This poster describes the analysis done to identify the main requirements for the implementation of the interfaces enabling the ESAP data access and computation resources integration in HPC and HTC computation infrastructures in terms of authentication and authorization policies, data management, workflow deployment and run. △ Less

Submitted 22 February, 2023; originally announced February 2023.

Comments: Will appear in Proceedings ADASSXXX ASP Conference Series

Feasibility of access EGI resources through the ESCAPE developed ESFRI Science Analysis Platform

Authors: Giuliano Taffoni, Sara Bertocco, Dave Morris, Manu Parra-Royón, Klaas Kliffen, Marco Molinaro, John Swinbank, Susana Sanchez Exposito

Abstract: The EU ESCAPE project is develo** ESAP, ESFRI 1 Scientific Analysis Platform, as an API gateway that enables the seamless integration of independent services accessing distributed data and computing resources. In ESCAPE we are exploring the possibility of exploiting EGI's OpenStack cloud computing services through ESAP. In our contribution we briefly describe ESCAPE and ESAP, the the use cases,… ▽ More The EU ESCAPE project is develo** ESAP, ESFRI 1 Scientific Analysis Platform, as an API gateway that enables the seamless integration of independent services accessing distributed data and computing resources. In ESCAPE we are exploring the possibility of exploiting EGI's OpenStack cloud computing services through ESAP. In our contribution we briefly describe ESCAPE and ESAP, the the use cases, the work done to automate a virtual machine creation in EGI's OpenStack cloud computing, drawbacks and possible solutions. △ Less

Submitted 24 January, 2023; originally announced January 2023.

Comments: Will be published in ADASS XXXII Proceedings - Astronomical Society of the Pacific Conference Series

The Planck clusters in the LOFAR sky. II. LoTSS-DR2: Recovering diffuse extended emission with LOFAR

Authors: L. Bruno, G. Brunetti, A. Botteon, V. Cuciti, D. Dallacasa, R. Cassano, R. J. van Weeren, T. Shimwell, G. Taffoni, S. A. Russo, A. Bonafede, M. Brüggen, D. N. Hoang, H. J. A. Röttgering, C. Tasse

Abstract: Extended radio sources in the sky require a dense sampling of short baselines to be properly imaged by interferometers. This problem arises in many areas of radio astronomy, such as in the study of galaxy clusters, which may host Mpc-scale diffuse synchrotron sources in the form of radio halos. In clusters where no radio halos are detected, owing to intrinsic absence of emission or extrinsic (inst… ▽ More Extended radio sources in the sky require a dense sampling of short baselines to be properly imaged by interferometers. This problem arises in many areas of radio astronomy, such as in the study of galaxy clusters, which may host Mpc-scale diffuse synchrotron sources in the form of radio halos. In clusters where no radio halos are detected, owing to intrinsic absence of emission or extrinsic (instrumental and/or observational) effects, it is possible to determine upper limits. We consider a sample of Planck galaxy clusters from the Second Data Release of the LOFAR Two Meter Sky Survey (LoTSS-DR2) where no radio halos are detected. We use this sample to test the capabilities of LOFAR to recover diffuse extended emission and derive upper limits. Through the injection technique, we simulate radio halos with various surface brightness profiles. We then predict the corresponding visibilities and image them along with the real visibilities. This method allows us to test the fraction of flux density losses owing to inadequate uv-coverage and obtain thresholds at which the mock emission becomes undetectable by visual inspection. The dense uv-coverage of LOFAR at short spacings allows to recover $\gtrsim90\%$ of the flux density of targets with sizes up to $\sim 15'$. We find a relation that provides upper limits based on the image noise and extent (in terms of number of beams) of the mock halo. This relation can be safely adopted to obtain upper limits without injecting when artifacts introduced by the subtraction of the discrete sources are negligible in the central region of the cluster. Otherwise, the injection process and visual inspection of the images are necessary to determine more reliable limits. Through these methods, we obtain upper limits for 75 clusters to be exploited in ongoing statistical studies. △ Less

Submitted 31 January, 2023; v1 submitted 19 January, 2023; originally announced January 2023.

Comments: 20 pages (including Appendices). 21 Figures. 4 Tables. Accepted for publication by A&A. For the project Webpage see https://lofar-surveys.org/planck_dr2.html

Journal ref: A&A 672, A41 (2023)

High Performance W-stacking for Imaging Radio Astronomy Data: a Parallel and Accelerated Solution

Authors: Claudio Gheller, Giuliano Taffoni, David Goz

Abstract: Current and upcoming radio-interferometers are expected to produce volumes of data of increasing size that need to be processed in order to generate the corresponding sky brightness distributions through imaging. This represents an outstanding computational challenge, especially when large fields of view and/or high resolution observations are processed. We have investigated the adoption of modern… ▽ More Current and upcoming radio-interferometers are expected to produce volumes of data of increasing size that need to be processed in order to generate the corresponding sky brightness distributions through imaging. This represents an outstanding computational challenge, especially when large fields of view and/or high resolution observations are processed. We have investigated the adoption of modern High Performance Computing systems specifically addressing the gridding, FFT-transform and w-correction of imaging, combining parallel and accelerated solutions. We have demonstrated that the code we have developed can support dataset and images of any size compatible with the available hardware, efficiently scaling up to thousands of cores or hundreds of GPUs, kee** the time to solution below one hour even when images of the size of the order of billion or tens of billion of pixels are generated. In addition, portability has been targeted as a primary objective, both in terms of usability on different computing platforms and in terms of performance. The presented results have been obtained on two different state-of-the-art High Performance Computing architectures. △ Less

Submitted 15 January, 2023; originally announced January 2023.

Comments: 16 pages, 12 figures, accepted for publication on RAS Techniques and Instruments

Rosetta: a container-centric science platform for resource-intensive, interactive data analysis

Authors: Stefano Alberto Russo, Sara Bertocco, Claudio Gheller, Giuliano Taffoni

Abstract: Rosetta is a science platform for resource-intensive, interactive data analysis which runs user tasks as software containers. It is built on top of a novel architecture based on framing user tasks as microservices - independent and self-contained units - which allows to fully support custom and user-defined software packages, libraries and environments. These include complete remote desktop and GU… ▽ More Rosetta is a science platform for resource-intensive, interactive data analysis which runs user tasks as software containers. It is built on top of a novel architecture based on framing user tasks as microservices - independent and self-contained units - which allows to fully support custom and user-defined software packages, libraries and environments. These include complete remote desktop and GUI applications, besides common analysis environments as the Jupyter Notebooks. Rosetta relies on Open Container Initiative containers, which allow for safe, effective and reproducible code execution; can use a number of container engines and runtimes; and seamlessly supports several workload management systems, thus enabling containerized workloads on a wide range of computing resources. Although developed in the astronomy and astrophysics space, Rosetta can virtually support any science and technology domain where resource-intensive, interactive data analysis is required. △ Less

Submitted 5 September, 2022; originally announced September 2022.

Galaxies in the central regions of simulated galaxy clusters

Authors: Antonio Ragagnin, Massimo Meneghetti, Luigi Bassini, Cinthia Ragone-Figueroa, Gian Luigi Granato, Giulia Despali, Carlo Giocoli, Giovanni Granata, Lauro Moscardini, Pietro Bergamini, Elena Rasia, Milena Valentini, Stefano Borgani, Francesco Calura, Klaus Dolag, Claudio Grillo, Amata Mercurio, Giuseppe Murante, Priyamvada Natarajan, Piero Rosati, Giuliano Taffoni, Luca Tornatore, Luca Tortorelli

Abstract: In this paper, we assess the impact of numerical resolution and of the implementation of energy input from AGN feedback models on the inner structure of cluster sub-haloes in hydrodynamic simulations. We compare several zoom-in re-simulations of a sub-sample of the cluster-sized haloes studied in Meneghetti et al. (2020), obtained by varying mass resolution, softening length and AGN energy feedbac… ▽ More In this paper, we assess the impact of numerical resolution and of the implementation of energy input from AGN feedback models on the inner structure of cluster sub-haloes in hydrodynamic simulations. We compare several zoom-in re-simulations of a sub-sample of the cluster-sized haloes studied in Meneghetti et al. (2020), obtained by varying mass resolution, softening length and AGN energy feedback scheme. We study the impact of these different setups on the subhalo abundances, their radial distribution, their density and mass profiles and the relation between the maximum circular velocity, which is a proxy for subhalo compactness. Regardless of the adopted numerical resolution and feedback model, subhaloes with masses Msub < 1e11Msun/h, the most relevant mass-range for galaxy-galaxy strong lensing, have maximum circular velocities ~30% smaller than those measured from strong lensing observations of Bergamini et al. (2019). We also find that simulations with less effective AGN energy feedback produce massive subhaloes (Msub> 1e11 Msun/h ) with higher maximum circular velocity and that their Vmax - Msub relation approaches the observed one. However the stellar-mass number count of these objects exceeds the one found in observations and we find that the compactness of these simulated subhaloes is the result of an extremely over-efficient star formation in their cores, also leading to larger-than-observed subhalo stellar mass. We conclude that simulations are unable to simultaneously reproduce the observed stellar masses and compactness (or maximum circular velocities) of cluster galaxies. Thus, the discrepancy between theory and observations that emerged from the analysis of Meneghetti et al. (2020) persists. It remains an open question as to whether such a discrepancy reflects limitations of the current implementation of galaxy formation models or the LCDM paradigm. △ Less

Submitted 19 April, 2022; originally announced April 2022.

Comments: 11 pages, 10 figures, abstract is redacted to fit arXiv character count limit

Journal ref: A&A 665, A16 (2022)

The probability of galaxy-galaxy strong lensing events in hydrodynamical simulations of galaxy clusters

Authors: Massimo Meneghetti, Antonio Ragagnin, Stefano Borgani, Francesco Calura, Giulia Despali, Carlo Giocoli, Gian Luigi Granato, Claudio Grillo, Lauro Moscardini, Elena Rasia, Piero Rosati, Giuseppe Angora, Luigi Bassini, Pietro Bergamini, Gabriel B. Caminha, Giovanni Granata, Amata Mercurio, Robert Benton Metcalf, Priyamvada Natarajan, Mario Nonino, Giada Venusta Pignataro, Cinthia Ragone-Figueroa, Eros Vanzella, Ana Acebron, Klaus Dolag , et al. (5 additional authors not shown)

Abstract: Meneghetti et al. (2020) recently reported an excess of galaxy-galaxy strong lensing (GGSL) in galaxy clusters compared to expectations from the LCDM cosmological model. Theoretical estimates of the GGSL probability are based on the analysis of numerical hydrodynamical simulations in the LCDM cosmology. We quantify the impact of the numerical resolution and AGN feedback scheme adopted in cosmologi… ▽ More Meneghetti et al. (2020) recently reported an excess of galaxy-galaxy strong lensing (GGSL) in galaxy clusters compared to expectations from the LCDM cosmological model. Theoretical estimates of the GGSL probability are based on the analysis of numerical hydrodynamical simulations in the LCDM cosmology. We quantify the impact of the numerical resolution and AGN feedback scheme adopted in cosmological simulations on the predicted GGSL probability and determine if varying these simulation properties can alleviate the gap with observations. We repeat the analysis of Meneghetti et al. (2020) on cluster-size halos simulated with different mass and force resolutions and implementing several independent AGN feedback schemes. We find that improving the mass resolution by a factor of ten and twenty-five, while using the same galaxy formation model that includes AGN feedback, does not affect the GGSL probability. We find similar results regarding the choice of gravitational softening. On the contrary, adopting an AGN feedback scheme that is less efficient at suppressing gas cooling and star formation leads to an increase in the GGSL probability by a factor between three and six. However, we notice that such simulations form overly massive subhalos whose contribution to the lensing cross-section would be significant while their Einstein radii are too large to be consistent with the observations. The primary contributors to the observed GGSL cross-sections are subhalos with smaller masses, that are compact enough to become critical for lensing. The population with these required characteristics appears to be absent in simulations. △ Less

Submitted 19 April, 2022; originally announced April 2022.

Comments: 13 pages, 11 figures. Submitted for publication on Astronomy and Astrophysics

Journal ref: A&A 668, A188 (2022)

Machine Learning to identify ICL and BCG in simulated galaxy clusters

Authors: I. Marini, S. Borgani, A. Saro, G. Murante, G. L. Granato, C. Ragone-Figueroa, G. Taffoni

Abstract: Nowadays, Machine Learning techniques offer fast and efficient solutions for classification problems that would require intensive computational resources via traditional methods. We examine the use of a supervised Random Forest to classify stars in simulated galaxy clusters after subtracting the member galaxies. These dynamically different components are interpreted as the individual properties of… ▽ More Nowadays, Machine Learning techniques offer fast and efficient solutions for classification problems that would require intensive computational resources via traditional methods. We examine the use of a supervised Random Forest to classify stars in simulated galaxy clusters after subtracting the member galaxies. These dynamically different components are interpreted as the individual properties of the stars in the Brightest Cluster Galaxy (BCG) and IntraCluster Light (ICL). We employ matched stellar catalogues (built from the different dynamical properties of BCG and ICL) of 29 simulated clusters from the DIANOGA set to train and test the classifier. The input features are cluster mass, normalized particle cluster-centric distance, and rest-frame velocity. The model is found to correctly identify most of the stars, while the larger errors are exhibited at the BCG outskirt, where the differences between the physical properties of the two components are less obvious. We investigate the robustness of the classifier to numerical resolution, redshift dependence (up to $z=1$), and included astrophysical models. We claim that our classifier provides consistent results in simulations for $z<1$, at different resolution levels and with significantly different subgrid models. The phase-space structure is examined to assess whether the general properties of the stellar components are recovered: (i) the transition radius between BCG-dominated and ICL-dominated region is identified at $0.04$ \r200; (ii) the BCG outskirt ($> 0.1$ \r200) is significantly affected by uncertainties in the classification process. In conclusion, this work suggests the importance of employing Machine Learning to speed up a computationally expensive classification in simulations. △ Less

Submitted 3 June, 2022; v1 submitted 7 March, 2022; originally announced March 2022.

Comments: 19 pages, accepted to MNRAS

A distributed computing infrastructure for LOFAR Italian community

Authors: Giuliano Taffoni, Ugo Becciani, Annalisa Bonafede, Etienne Bonnassieux, Gianfranco Brunetti, Marisa Brienza, Claudio Gheller, Stefano A. Russo, Fabio Vitello

Abstract: The LOw-Frequency ARray is a low-frequency radio interferometer composed by observational stations spread across Europe and it is the largest precursor of SKA in terms of effective area and generated data rates. In 2018, the Italian community officially joined LOFAR project, and it deployed a distributed computing and storage infrastructure dedicated to LOFAR data analysis. The infrastructure is b… ▽ More The LOw-Frequency ARray is a low-frequency radio interferometer composed by observational stations spread across Europe and it is the largest precursor of SKA in terms of effective area and generated data rates. In 2018, the Italian community officially joined LOFAR project, and it deployed a distributed computing and storage infrastructure dedicated to LOFAR data analysis. The infrastructure is based on 4 nodes distributed in different Italian locations and it offers services for pipelines execution, storage of final and intermediate results and support for the use of the software and infrastructure. As the analysis of the LOw-Frequency ARray data requires a very complex computational procedure, a container-based approach has been adopted to distribute software environments to the different computing resources. A science platform approach is used to facilitate interactive access to computational resources. In this paper, we describe the architecture and main features of the infrastructure. △ Less

Submitted 27 January, 2022; originally announced January 2022.

Comments: In Astronomical Data Analysis Software and Systems (ADASS) XXXI

The Virtual Observatory Ecosystem Facing the European Open Science Cloud

Authors: Marco Molinaro, Mark Allen, Françoise Genova, André Schaaff, Margarida Castro Neves, Markus Demleitner, Sara Bertocco, Dave Morris, François Bonnarel, Stelios Voutsinas, Catherine Boisson, Giuliano Taffoni

Abstract: The International Virtual Observatory Alliance (IVOA) has developed and built, in the last two decades, an ecosystem of distributed resources, interoperable and based upon open shared technological standards. In doing so the IVOA has anticipated, putting into practice for the astrophysical domain, the ideas of FAIR-ness of data and service resources and the Open-ness of sharing scientific results,… ▽ More The International Virtual Observatory Alliance (IVOA) has developed and built, in the last two decades, an ecosystem of distributed resources, interoperable and based upon open shared technological standards. In doing so the IVOA has anticipated, putting into practice for the astrophysical domain, the ideas of FAIR-ness of data and service resources and the Open-ness of sharing scientific results, leveraging on the underlying open standards required to fill the above. In Europe, efforts in supporting and develo** the ecosystem proposed by the IVOA specifications has been provided by a continuous set of EU funded projects up to current H2020 ESCAPE ESFRI cluster. In the meantime, in the last years, Europe has realised the importance of promoting the Open Science approach for the research communities and started the European Open Science Cloud (EOSC) project to create a distributed environment for research data, services and communities. In this framework the European VO community, had to face the move from the interoperability scenario in the astrophysics domain into a larger audience perspective that includes a cross-domain FAIR approach. Within the ESCAPE project the CEVO Work Package (Connecting ESFRI to EOSC through the VO) has one task to deal with this integration challenge: a challenge where an existing, mature, distributed e-infrastructure has to be matched to a forming, more general architecture. CEVO started its works in the first months of 2019 and has already worked on the integration of the VO Registry into the EOSC e-infrastructure. This contribution reports on the first year and a half of integration activities, that involve applications, services and resources being aware of the VO scenario and compatible with the EOSC architecture. △ Less

Submitted 15 March, 2021; originally announced March 2021.

Comments: 14 pages, 9 figures Proceedings of SPIE 2020 Astronomical Telescopes + Instrumentation Conference 11449 Observatory Operations: Strategies, Processes, and Systems VIII

Journal ref: Proc. SPIE 11449, Observatory Operations: Strategies, Processes, and Systems VIII, 114491S (13 December 2020)

The DIANOGA simulations of galaxy clusters: characterizing star formation in proto-clusters

Authors: L. Bassini, E. Rasia, S. Borgani, G. L. Granato, C. Ragone-Figueroa, V. Biffi, A. Ragagnin, K. Dolag, W. Lin, G. Murante, N. R. Napolitano, G. Taffoni, L. Tornatore, Y. Wang

Abstract: We studied the star formation rate (SFR) in cosmological hydrodynamical simulations of galaxy (proto-)clusters in the redshift range $0<z<4$, comparing them to recent observational studies; we also investigated the effect of varying the parameters of the star formation model on galaxy properties such as SFR, star-formation efficiency, and gas fraction. We analyze a set of zoom-in cosmological hydr… ▽ More We studied the star formation rate (SFR) in cosmological hydrodynamical simulations of galaxy (proto-)clusters in the redshift range $0<z<4$, comparing them to recent observational studies; we also investigated the effect of varying the parameters of the star formation model on galaxy properties such as SFR, star-formation efficiency, and gas fraction. We analyze a set of zoom-in cosmological hydrodynamical simulations centred on twelve clusters. The simulations are carried out with the GADGET-3 TreePM/SPH code which includes various subgrid models to treat unresolved baryonic physics, including AGN feedback. Simulations do not reproduce the high values of SFR observed within protoclusters cores, where the values of SFR are underpredicted by a factor $\gtrsim 4$ both at $z\sim2$ and $z\sim 4$. The difference arises as simulations are unable to reproduce the observed starburst population and is worsened at $z\sim 2$ because simulations underpredict the normalization of the main sequence of star forming galaxies (i.e., the correlation between stellar mass and SFR) by a factor of $\sim 3$. As the low normalization of the main sequence seems to be driven by an underestimated gas fraction, it remains unclear whether numerical simulations miss starburst galaxies due to a too low predicted gas fractions or too low star formation efficiencies. Our results are stable against varying several parameters of the star formation subgrid model and do not depend on the details of the AGN feedback. △ Less

Submitted 20 July, 2020; v1 submitted 24 June, 2020; originally announced June 2020.

Comments: 20 pages, 19 figures. Accepted for publication in A&A

Journal ref: A&A 642, A37 (2020)

Performance and energy footprint assessment of FPGAs and GPUs on HPC systems using Astrophysics application

Authors: David Goz, Georgios Ieronymakis, Vassilis Papaefstathiou, Nikolaos Dimou, Sara Bertocco, Francesco Simula, Antonio Ragagnin, Luca Tornatore, Igor Coretti, Giuliano Taffoni

Abstract: New challenges in Astronomy and Astrophysics (AA) are urging the need for a large number of exceptionally computationally intensive simulations. "Exascale" (and beyond) computational facilities are mandatory to address the size of theoretical problems and data coming from the new generation of observational facilities in AA. Currently, the High Performance Computing (HPC) sector is undergoing a pr… ▽ More New challenges in Astronomy and Astrophysics (AA) are urging the need for a large number of exceptionally computationally intensive simulations. "Exascale" (and beyond) computational facilities are mandatory to address the size of theoretical problems and data coming from the new generation of observational facilities in AA. Currently, the High Performance Computing (HPC) sector is undergoing a profound phase of innovation, in which the primary challenge to the achievement of the "Exascale" is the power-consumption. The goal of this work is to give some insights about performance and energy footprint of contemporary architectures for a real astrophysical application in an HPC context. We use a state-of-the-art N-body application that we re-engineered and optimized to exploit the heterogeneous underlying hardware fully. We quantitatively evaluate the impact of computation on energy consumption when running on four different platforms. Two of them represent the current HPC systems (Intel-based and equipped with NVIDIA GPUs), one is a micro-cluster based on ARM-MPSoC, and one is a "prototype towards Exascale" equipped with ARM-MPSoCs tightly coupled with FPGAs. We investigate the behavior of the different devices where the high-end GPUs excel in terms of time-to-solution while MPSoC-FPGA systems outperform GPUs in power consumption. Our experience reveals that considering FPGAs for computationally intensive application seems very promising, as their performance is improving to meet the requirements of scientific applications. This work can be a reference for future platforms development for astrophysics applications where computationally intensive calculations are required. △ Less

Submitted 10 April, 2020; v1 submitted 6 March, 2020; originally announced March 2020.

Comments: 15 pages, 4 figures, 3 tables; Preprint (V2) submitted to MDPI (Special Issue: Energy-Efficient Computing on Parallel Architectures)

CHIPP: INAF pilot project for HTC, HPC and HPDA

Authors: Giuliano Taffoni, Ugo Becciani, Bianca Garilli, Gianmarco Maggio, Fabio Pasian, Grazia Umana, Riccardo Smareglia, Fabio Vitello

Abstract: CHIPP (Computing HTC in INAF Pilot Project) is an Italian project funded by the Italian Institute for Astrophysics (INAF) and promoted by the ICT office of INAF. The main purpose of the CHIPP project is to coordinate the use of, and access to, already existing high throughput computing and high-performance computing and data processing resources (for small/medium size programs) for the INAF commun… ▽ More CHIPP (Computing HTC in INAF Pilot Project) is an Italian project funded by the Italian Institute for Astrophysics (INAF) and promoted by the ICT office of INAF. The main purpose of the CHIPP project is to coordinate the use of, and access to, already existing high throughput computing and high-performance computing and data processing resources (for small/medium size programs) for the INAF community. Today, Tier2/Tier3 systems (1,200 CPU/core) are provided at the INAF institutes at Trieste and Catania, but in the future, the project will evolve including also other computing infrastructures. During the last two years, more than 30 programs have been approved for a total request of 30 Million CPU-h. Most of the programs are HPC, data reduction and analysis, machine learning. In this paper, we describe in details the CHIPP infrastructures and the results of the first two years of activity. △ Less

Submitted 4 February, 2020; originally announced February 2020.

Comments: 4 pages, conference, ADASS 2019

INAF Trieste Astronomical Observatory Information Technology Framework

Authors: S. Bertocco, D. Goz, L. Tornatore, A. Ragagnin, G. Maggio, F. Gasparo, C. Vuerli, G. Taffoni, M. Molinaro

Abstract: INAF Trieste Astronomical Observatory (OATs) has a long tradition in information technology applied to Astronomical and Astrophysical use cases, particularly for what regards computing for data reduction, analysis and simulations; data and archives management; space missions data processing; design and software development for ground-based instruments. The ensemble of these activities, in the last… ▽ More INAF Trieste Astronomical Observatory (OATs) has a long tradition in information technology applied to Astronomical and Astrophysical use cases, particularly for what regards computing for data reduction, analysis and simulations; data and archives management; space missions data processing; design and software development for ground-based instruments. The ensemble of these activities, in the last years, pushed the need to acquire new computing resources and technologies and to deep competences in theirs management. In this paper we describe INAF-OATs computing centre technological stuff, our involvement in different EU Projects both in the path of building of EOSC, the European Open Science Cloud; in the design and prototy** of new Exascale supercomputers in Europe and the main research activities carried on using our computing centre. △ Less

Submitted 11 December, 2019; originally announced December 2019.

Integrating the VO Framework in the EOSC

Authors: Marco Molinaro, Mark Allen, Sara Bertocco, Catherine Boisson, François Bonnarel, Margarida Castro Neves, Markus Demleitner, Françoise Genova, Dave Morris, André Schaaff, Giuliano Taffoni, Stelios Voutsinas

Abstract: The European Open Science Cloud (EOSC) is in its early stages, but already some aspects of the EOSC vision are starting to become reality, for example the EOSC portal and the development of metadata catalogues. In the astrophysical domain already exists an open approach to science data: the Virtual Observatory view put in place by the International Virtual Observatory Alliance (IVOA) architecture… ▽ More The European Open Science Cloud (EOSC) is in its early stages, but already some aspects of the EOSC vision are starting to become reality, for example the EOSC portal and the development of metadata catalogues. In the astrophysical domain already exists an open approach to science data: the Virtual Observatory view put in place by the International Virtual Observatory Alliance (IVOA) architecture of standards. The ESCAPE (European Science Cluster of Astronomy & Particle physics ESFRI research infrastructures) project has, among its tasks, to demonstrate that the VO architecture can be integrated within the EOSC building one and to provide guidelines to ESFRI partners (European Strategy Forum on Research Infrastructures) in doing this. This contribution reports on the progress of this integration after the first months of work inside ESCAPE. △ Less

Submitted 19 November, 2019; originally announced November 2019.

Comments: 4 pages, 2 figures, ADASS XXIX proceedings

Direct N-body application on low-power and energy-efficient parallel architectures

Authors: D. Goz, G. Ieronymakis, V. Papaefstathiou, N. Dimou, S. Bertocco, A. Ragagnin, L. Tornatore, G. Taffoni, I. Coretti

Abstract: The aim of this work is to quantitatively evaluate the impact of computation on the energy consumption on ARM MPSoC platforms, exploiting CPUs, embedded GPUs and FPGAs. One of them possibly represents the future of High Performance Computing systems: a prototype of an Exascale supercomputer. Performance and energy measurements are made using a state-of-the-art direct $N$-body code from the astroph… ▽ More The aim of this work is to quantitatively evaluate the impact of computation on the energy consumption on ARM MPSoC platforms, exploiting CPUs, embedded GPUs and FPGAs. One of them possibly represents the future of High Performance Computing systems: a prototype of an Exascale supercomputer. Performance and energy measurements are made using a state-of-the-art direct $N$-body code from the astrophysical domain. We provide a comparison of the time-to-solution and energy delay product metrics, for different software configurations. We have shown that FPGA technologies can be used for application kernel acceleration and are emerging as a promising alternative to "traditional" technologies for HPC, which purely focus on peak-performance than on power-efficiency. △ Less

Submitted 31 October, 2019; originally announced October 2019.

Comments: 10 pages, 5 figure, 2 tables; The final publication will be available at IOS Press

Shall numerical astrophysics step into the era of Exascale computing?

Authors: Giuliano Taffoni, Giuseppe Murante, Luca Tornatore, David Goz, Stefano Borgani, Manolis Katevenis, Nikolaos Chrysos, Manolis Marazakis

Abstract: High performance computing numerical simulations are today one of the more effective instruments to implement and study new theoretical models, and they are mandatory during the preparatory phase and operational phase of any scientific experiment. New challenges in Cosmology and Astrophysics will require a large number of new extremely computationally intensive simulations to investigate physical… ▽ More High performance computing numerical simulations are today one of the more effective instruments to implement and study new theoretical models, and they are mandatory during the preparatory phase and operational phase of any scientific experiment. New challenges in Cosmology and Astrophysics will require a large number of new extremely computationally intensive simulations to investigate physical processes at different scales. Moreover, the size and complexity of the new generation of observational facilities also implies a new generation of high performance data reduction and analysis tools pushing toward the use of Exascale computing capabilities. Exascale supercomputers cannot be produced today. We discuss the major technological challenges in the design, development and use of such computing capabilities and we will report on the progresses that has been made in the last years in Europe, in particular in the framework of the ExaNeSt European funded project. We also discuss the impact of this new computing resources on the numerical codes in Astronomy and Astrophysics. △ Less

Submitted 26 April, 2019; originally announced April 2019.

Comments: 3 figures, invited talk for proceedings of ADASS XXVI, accepted by ASP Conference Series

Application of Google Cloud Platform in Astrophysics

Authors: M. Landoni, G. Taffoni, A. Bignamini, R. Smareglia

Abstract: The availability of new Cloud Platform offered by Google motivated us to propose nine Proof of Concepts (PoC) aiming to demonstrated and test the capabilities of the platform in the context of scientifically-driven tasks and requirements. We review the status of our initiative by illustrating 3 out of 9 successfully closed PoC that we implemented on Google Cloud Platform. In particular, we illustr… ▽ More The availability of new Cloud Platform offered by Google motivated us to propose nine Proof of Concepts (PoC) aiming to demonstrated and test the capabilities of the platform in the context of scientifically-driven tasks and requirements. We review the status of our initiative by illustrating 3 out of 9 successfully closed PoC that we implemented on Google Cloud Platform. In particular, we illustrate a cloud architecture for deployment of scientific software as microservice coupling Google Compute Engine with Docker and Pub/Sub to dispatch heavily parallel simulations. We detail also an experiment for HPC based simulation and workflow executions of data reduction pipelines (for the TNG-GIANO-B spectrograph) deployed on GCP. We compare and contrast our experience with on-site facilities comparing advantages and disadvantages both in terms of total cost of ownership and reached performances. △ Less

Submitted 8 March, 2019; originally announced March 2019.

Comments: ADASS XXVIII Conference paper - Published by the Astronomical Society of the Pacific (ASP)

Black hole mass of central galaxies and cluster mass correlation in cosmological hydro-dynamical simulations

Authors: Luigi Bassini, Elena Rasia, Stefano Borgani, Cinthia Ragone-Figueroa, Veronica Biffi, Klaus Dolag, Massimo Gaspari, Gian Luigi Granato, Giuseppe Murante, Giuliano Taffoni, Luca Tornatore

Abstract: Recently, relations connecting the SMBH mass of central galaxies and global properties of the hosting cluster, such as temperature and mass, were observed. We investigate the correlation between SMBH mass and cluster mass and temperature, their establishment and evolution. We compare their scatter to that of the classical $M_{\rm BH}-M_{\rm BCG}$ relation. We study how gas accretion and BH-BH merg… ▽ More Recently, relations connecting the SMBH mass of central galaxies and global properties of the hosting cluster, such as temperature and mass, were observed. We investigate the correlation between SMBH mass and cluster mass and temperature, their establishment and evolution. We compare their scatter to that of the classical $M_{\rm BH}-M_{\rm BCG}$ relation. We study how gas accretion and BH-BH mergers contribute to SMBH growth across cosmic time. We employed 135 groups and clusters with a mass range $1.4\times 10^{13}M_{\odot}-2.5\times 10^{15} M_{\odot}$ extracted from a set of 29 zoom-in cosmological hydro-dynamical simulations where the baryonic physics is treated with various sub-grid models, including feedback by AGN. In our simulations we find that $M_{\rm BH}$ correlates well with $M_{500}$ and $T_{500}$, with the scatter around these relations compatible within $2σ$ with the scatter around $M_{\rm BH}-M_{\rm BCG}$ at $z=0$. The $M_{\rm BH}-M_{500}$ relation evolves with time, becoming shallower at lower redshift as a direct consequence of hierarchical structure formation. On average, in our simulations the contribution of gas accretion to the total SMBH mass dominates for the majority of the cosmic time ($z>0.4$), while in the last 2 Gyr the BH-BH mergers become a larger contributor. During this last process, substructures hosting SMBHs are disrupted in the merger process with the BCG and the unbound stars enrich the diffuse stellar component rather than increase BCG mass. From the results obtained in our simulations with simple sub-grid models we conclude that the scatter around the $M_{\rm BH}-T_{500}$ relation is comparable to the scatter around the $M_{\rm BH}-M_{\rm BCG}$ relation and that, given the observational difficulties related to the estimation of the BCG mass, clusters temperature and mass can be a useful proxy for the SMBHs mass, especially at high redshift. △ Less

Submitted 27 October, 2019; v1 submitted 7 March, 2019; originally announced March 2019.

Comments: 16 pages, 17 figures, 3 tables

Journal ref: A&A 630, A144 (2019)

Direct $N$-body code on low-power embedded ARM GPUs

Authors: David Goz, Sara Bertocco, Luca Tornatore, Giuliano Taffoni

Abstract: This work arises on the environment of the ExaNeSt project aiming at design and development of an exascale ready supercomputer with low energy consumption profile but able to support the most demanding scientific and technical applications. The ExaNeSt compute unit consists of densely-packed low-power 64-bit ARM processors, embedded within Xilinx FPGA SoCs. SoC boards are heterogeneous architectur… ▽ More This work arises on the environment of the ExaNeSt project aiming at design and development of an exascale ready supercomputer with low energy consumption profile but able to support the most demanding scientific and technical applications. The ExaNeSt compute unit consists of densely-packed low-power 64-bit ARM processors, embedded within Xilinx FPGA SoCs. SoC boards are heterogeneous architecture where computing power is supplied both by CPUs and GPUs, and are emerging as a possible low-power and low-cost alternative to clusters based on traditional CPUs. A state-of-the-art direct $N$-body code suitable for astrophysical simulations has been re-engineered in order to exploit SoC heterogeneous platforms based on ARM CPUs and embedded GPUs. Performance tests show that embedded GPUs can be effectively used to accelerate real-life scientific calculations, and that are promising also because of their energy efficiency, which is a crucial design in future exascale platforms. △ Less

Submitted 24 January, 2019; originally announced January 2019.

Comments: 16 pages, 7 figures, 1 table, accepted for publication in the Computing Conference 2019 proceedings

Journal ref: Intelligent Computing. CompCom 2019. Advances in Intelligent Systems and Computing, vol 997. Springer, Cham

Astrophysical code migration into Exascale Era

Authors: David Goz, Sara Bertocco, Luca Tornatore, Giuliano Taffoni

Abstract: The ExaNeSt and EuroExa H2020 EU-funded projects aim to design and develop an exascale ready computing platform prototype based on low-energy-consumption ARM64 cores and FPGA accelerators. We participate in the application-driven design of the hardware solutions and prototype validation. To carry on this work we are using, among others, Hy-Nbody, a state-of-the-art direct N-body code. Core algorit… ▽ More The ExaNeSt and EuroExa H2020 EU-funded projects aim to design and develop an exascale ready computing platform prototype based on low-energy-consumption ARM64 cores and FPGA accelerators. We participate in the application-driven design of the hardware solutions and prototype validation. To carry on this work we are using, among others, Hy-Nbody, a state-of-the-art direct N-body code. Core algorithms of Hy-Nbody have been improved in such a way to increasingly fit them to the exascale target platform. Waiting for the ExaNest prototype release, we are performing tests and code tuning operations on an ARM64 SoC facility: a SLURM managed HPC cluster based on 64-bit ARMv8 Cortex-A72/Cortex-A53 core design and powered by a Mali-T864 embedded GPU. In parallel, we are porting a kernel of Hy-Nbody on FPGA aiming to test and compare the performance-per-watt of our algorithms on different platforms. In this paper we describe how we re-engineered the application and we show first results on ARM SoC. △ Less

Submitted 2 December, 2018; originally announced December 2018.

Comments: 4 pages, 1 figure, 1 table; proceedings of ADASS XXVIII, accepted by ASP Conference Series

From ESPRESSO to the future -- Analysis of QSO spectra with the Astrocook package

Authors: Guido Cupani, Giorgio Calderone, Stefano Cristiani, Valentina D'Odorico, Giuliano Taffoni

Abstract: The ESPRESSO instrument, to be commissioned in the next months at the ESO VLT, is bound to became a landmark in the field of high-resolution optical spectroscopy, both for its ground-breaking science objectives (search for Earth-like exoplanets; measure of a possible variation of fundamental constants) and for its novel approach to data treatment. For the first time for an ESO instrument, scientif… ▽ More The ESPRESSO instrument, to be commissioned in the next months at the ESO VLT, is bound to became a landmark in the field of high-resolution optical spectroscopy, both for its ground-breaking science objectives (search for Earth-like exoplanets; measure of a possible variation of fundamental constants) and for its novel approach to data treatment. For the first time for an ESO instrument, scientific information will be extracted in real time by a dedicated Data Analysis Software (DAS), which includes several interactive workflows to handle the typical analysis cases in stellar and QSO spectroscopy. Data analysis tools in the oncoming ELT era will face very demanding requirements from compelling science case, such as the Sandage Test: the need of handling larger data sizes with a higher degree of accuracy, and the possibility to compare observations and simulated data on the fly. To this purpose, we are currently porting the solutions developed for ESPRESSO to a wider framework, integrating the algorithms within a full-fledged set of Python modules. The project, named "Astrocook", is aimed to provide a set of high-level, instrument-agnostic procedures to automatically extract physical information from the data. △ Less

Submitted 13 August, 2018; originally announced August 2018.

Comments: 4 pages, 1 figure; proceedings of ADASS XXVII, accepted by ASP Conference Series

Cloud access to interoperable IVOA-compliant VOSpace storage

Authors: S. Bertocco, P. Dowler, S. Gaudet, B. Major, F. Pasian, G. Taffoni

Abstract: Handling, processing and archiving the huge amount of data produced by the new generation of experiments and instruments in Astronomy and Astrophysics are among the more exciting challenges to address in designing the future data management infrastructures and computing services. We investigated the feasibility of a data management and computation infrastructure, available world-wide, with the aim… ▽ More Handling, processing and archiving the huge amount of data produced by the new generation of experiments and instruments in Astronomy and Astrophysics are among the more exciting challenges to address in designing the future data management infrastructures and computing services. We investigated the feasibility of a data management and computation infrastructure, available world-wide, with the aim of merging the FAIR (Findable, Accessible, Interoperable, Reusable) data management provided by IVOA standards with the efficiency and reliability of a cloud approach. Our work involved the Canadian Advanced Network for Astronomy Research (CANFAR) infrastructure and the European EGI federated cloud (EFC). We designed and deployed a pilot data management and computation infrastructure that provides IVOA-compliant VOSpace storage resources and wide access to interoperable federated clouds. In this paper, we detail the main user requirements covered, the technical choices and the implemented solutions and we describe the resulting Hybrid cloud Worldwide infrastructure, its benefits and limitations. △ Less

Submitted 13 June, 2018; originally announced June 2018.

Comments: 24 pages, 7 figures. Paper accepted for publication in "Astronomy and Computing", Elsevier

Building an interoperable, distributed storage and authorization system

Authors: Sara Bertocco, Brjan Major, Patrick Dowler, Séverin Gaudet, Marco Molinaro, Giuliano Taffoni

Abstract: A joint project between the Canadian Astronomy Data Center of the National Research Council Canada, and the italian Istituto Nazionale di Astrofisica-Osservatorio Astronomico di Trieste (INAF-OATs), partially funded by the EGI-Engage H2020 European Project, is devoted to deploy an integrated infrastructure, based on the International Virtual Observatory Alliance (IVOA) standards, to access and exp… ▽ More A joint project between the Canadian Astronomy Data Center of the National Research Council Canada, and the italian Istituto Nazionale di Astrofisica-Osservatorio Astronomico di Trieste (INAF-OATs), partially funded by the EGI-Engage H2020 European Project, is devoted to deploy an integrated infrastructure, based on the International Virtual Observatory Alliance (IVOA) standards, to access and exploit astronomical data. Currently CADC-CANFAR provides scientists with an access, storage and computation facility, based on software libraries implementing a set of standards developed by the International Virtual Observatory Alliance (IVOA). The deployment of a twin infrastructure, basically built on the same open source software libraries, has been started at INAF-OATs. This new infrastructure now provides users with an Access Control Service and a Storage Service. The final goal of the ongoing project is to build an integrated infrastructure geographycally distributed providing complete interoperability, both in users access control and data sharing. This paper describes the target infrastructure, the main user requirements covered, the technical choices and the implemented solutions. △ Less

Submitted 7 December, 2017; originally announced December 2017.

Comments: 4 pages, 2 figures, submitted to Astronomical Society of the Pacific (ASP) as part of their Conference Series

Interoperable geographically distributed astronomical infrastructures: technical solutions

Authors: Sara Bertocco, Brian Major, Patrick Dowler, Séverin Gaudet, Fabio Pasian, Giuliano Taffoni

Abstract: The increase of astronomical data produced by a new generation of observational tools poses the need to distribute data and to bring computation close to the data. Trying to answer this need, we set up a federated data and computing infrastructure involving an international cloud facility, EGI federated, and a set of services implementing IVOA standards and recommendations for authentication, data… ▽ More The increase of astronomical data produced by a new generation of observational tools poses the need to distribute data and to bring computation close to the data. Trying to answer this need, we set up a federated data and computing infrastructure involving an international cloud facility, EGI federated, and a set of services implementing IVOA standards and recommendations for authentication, data sharing and resource access. In this paper we describe technical problems faced, specifically we show the designing, technological and architectural solutions adopted. We depict our technological overall solution to bring data close to computation resources. Besides the adopted solutions, we propose some points for an open discussion on authentication and authorization mechanisms. △ Less

Submitted 7 December, 2017; originally announced December 2017.

Comments: 4 pages, 1 figure, submitted to Astronomical Society of the Pacific (ASP)

Cosmological Simulations in Exascale Era

Authors: D. Goz, L. Tornatore, G. Taffoni, G. Murante

Abstract: The architecture of Exascale computing facilities, which involves millions of heterogeneous processing units, will deeply impact on scientific applications. Future astrophysical HPC applications must be designed to make such computing systems exploitable. The ExaNeSt H2020 EU-funded project aims to design and develop an exascale ready prototype based on low-energy-consumption ARM64 cores and FPGA… ▽ More The architecture of Exascale computing facilities, which involves millions of heterogeneous processing units, will deeply impact on scientific applications. Future astrophysical HPC applications must be designed to make such computing systems exploitable. The ExaNeSt H2020 EU-funded project aims to design and develop an exascale ready prototype based on low-energy-consumption ARM64 cores and FPGA accelerators. We participate to the design of the platform and to the validation of the prototype with cosmological N-body and hydrodynamical codes suited to perform large-scale, high-resolution numerical simulations of cosmic structures formation and evolution. We discuss our activities on astrophysical applications to take advantage of the underlying architecture. △ Less

Submitted 1 December, 2017; originally announced December 2017.

Comments: submitted to ASP

IVOA Recommendation: SSO - Single-Sign-On Profile: Authentication Mechanisms Version 2.0

Authors: Giuliano Taffoni, André Schaaff, Guy Rixon, Brian Major

Abstract: Approved client-server authentication mechanisms are described for the IVOA single-sign-on profile: No Authentication; HTTP Basic Authentication; TLS with passwords; TLS with client certificates; Cookies; Open Authentication; Security Assertion Markup Language; OpenID. Normative rules are given for the implementation of these mechanisms, mainly by reference to pre-existing standards. The Authoriza… ▽ More Approved client-server authentication mechanisms are described for the IVOA single-sign-on profile: No Authentication; HTTP Basic Authentication; TLS with passwords; TLS with client certificates; Cookies; Open Authentication; Security Assertion Markup Language; OpenID. Normative rules are given for the implementation of these mechanisms, mainly by reference to pre-existing standards. The Authorization mechanisms are out of the scope of this document. △ Less

Submitted 1 September, 2017; originally announced September 2017.

IVOA Recommendation: IVOA Credential Delegation Protocol Version 1.0

Authors: Matthew Graham, Raymond Plante, Guy Rixon, Giuliano Taffoni

Abstract: The credential delegation protocol allows a client program to delegate a user's credentials to a service such that that service may make requests of other services in the name of that user. The protocol defines a REST service that works alongside other IVO services to enable such a delegation in a secure manner. In addition to defining the specifics of the service protocol, this document describes… ▽ More The credential delegation protocol allows a client program to delegate a user's credentials to a service such that that service may make requests of other services in the name of that user. The protocol defines a REST service that works alongside other IVO services to enable such a delegation in a secure manner. In addition to defining the specifics of the service protocol, this document describes how a delegation service is registered in an IVOA registry along with the services it supports. The specification also explains how one can determine from a service registration that it requires the use of a supporting delegation service. △ Less

Submitted 3 October, 2011; originally announced October 2011.

The MORGANA model for the rise of galaxies and active nuclei

Authors: Pierluigi Monaco, Fabio Fontanot, Giuliano Taffoni

Abstract: We present the MOdel for the Rise of GAlaxies aNd Active nuclei (MORGANA). Starting from the merger trees of dark matter halos and a model for the evolution of substructure within the halos, the complex physics of baryons is modeled with a set of state-of-the-art models that describe the mass, metal and energy flows between the various components and phases of a galaxy. The processes of shock-he… ▽ More We present the MOdel for the Rise of GAlaxies aNd Active nuclei (MORGANA). Starting from the merger trees of dark matter halos and a model for the evolution of substructure within the halos, the complex physics of baryons is modeled with a set of state-of-the-art models that describe the mass, metal and energy flows between the various components and phases of a galaxy. The processes of shock-heating and cooling, star formation, feedback, galactic winds and super-winds, accretion onto BHs and AGN feedback are described by new models. In particular, the evolution of the halo gas explicitly follows the thermal and kinetic energies of the hot and cold phases, while star formation and feedback follow the results of the multi-phase model by Monaco (2004a). The increased level of sophistication allows to move from a phenomenological description of gas physics, based on simple scalings with the depth of the DM halo potential, toward a fully physically motivated one. The comparison of the predictions of MORGANA with a basic set of galactic data reveals from the one hand an overall rough agreement, and from the other hand highlights a number of well- or less-known problems: (i) producing the cutoff of the luminosity function requires to force the quenching of the late cooling flows by AGN feedback, (ii) the normalization of the Tully-Fisher relation of local spirals cannot be recovered unless the dark matter halos are assumed to have a very low concentration, (iii) the mass function of HI gas is not easily fitted at small masses, unless a similarly low concentration is assumed, (iv) there is an excess of small elliptical galaxies at z=0. These discrepancies, more than the points of agreement with data, give important clues on the missing ingredients of galaxy formation. (ABRIDGED) △ Less

Submitted 16 November, 2006; v1 submitted 26 October, 2006; originally announced October 2006.

Comments: 35 pages, figures included, uses mn2e.cls. Revised cooling model, results are slightly changed, conclusions are unchanged. MNRAS, in press

Journal ref: Mon.Not.Roy.Astron.Soc.375:1189-1219,2007

Bridging the Virtual Observatory and the GRID with the query element

Authors: G. Taffoni, E. Ambrodsi, C. Vuerli, A. Barisani, R. Smareglia, A. Volpato, S. Pastore, A. Baruffolo, A. Ghiselli, F. Pasian, L. Benacchio

Abstract: The current generation of Grid infrastructures designed for production activity is strongly computing oriented and tuned on the needs of applications that requires intensive computations. Problems arise when trying to use such Grids to satisfy the sharing of data-oriented and service-oriented resources as happens in the IVOA community. We have designed, developed and implemented a Grid query ele… ▽ More The current generation of Grid infrastructures designed for production activity is strongly computing oriented and tuned on the needs of applications that requires intensive computations. Problems arise when trying to use such Grids to satisfy the sharing of data-oriented and service-oriented resources as happens in the IVOA community. We have designed, developed and implemented a Grid query element to access data source from an existing production Grid environment. We also enhanced the Grid middleware model (collective resources and sites) to manage Data Sources extending the Grid semantic. The query element and the modified grid Information System are able to connect the Grid environment to Virtual Observatory resources. A specialized query element is designed to work as Virtual Observatory resource in the Grid so than an Astronomer can access Virtual Observatory data using the IVOA standards. △ Less

Submitted 5 May, 2006; originally announced May 2006.

Comments: 4 pages, 4 figure, Grid Workshop, 15 November 2005, Rome Italy

On the Life and Death of Satellite Haloes

Authors: Giuliano Taffoni, Lucio Mayer, Monica Colpi, Fabio Governato

Abstract: We study the evolution of dark matter satellites orbiting inside more massive haloes using semi-analytical tools coupled with high-resolution N-Body simulations. We select initial satellite sizes, masses, orbital energies, and eccentricities as predicted by hierarchical models of structure formation. Both the satellite and the main halo are described by a Navarro, Frenk & White density profile w… ▽ More We study the evolution of dark matter satellites orbiting inside more massive haloes using semi-analytical tools coupled with high-resolution N-Body simulations. We select initial satellite sizes, masses, orbital energies, and eccentricities as predicted by hierarchical models of structure formation. Both the satellite and the main halo are described by a Navarro, Frenk & White density profile with various concentrations. △ Less

Submitted 14 January, 2003; originally announced January 2003.

Comments: To appear on MNRAS. Send comments to [email protected]

Journal ref: Mon.Not.Roy.Astron.Soc.341:434,2003

PINOCCHIO and the hierarchical build-up of dark matter haloes

Authors: G. Taffoni, P. Monaco, T. Theuns

Abstract: We study the ability of PINOCCHIO (PINpointing Orbit-Crossing Collapsed HIerarchical Objects) to predict the merging histories of dark matter (DM) haloes, comparing the PINOCCHIO predictions with the results of two large N-body simulations run from the same set of initial conditions. We focus our attention on quantities most relevant to galaxy formation and large-scale structure studies. PINOCCH… ▽ More We study the ability of PINOCCHIO (PINpointing Orbit-Crossing Collapsed HIerarchical Objects) to predict the merging histories of dark matter (DM) haloes, comparing the PINOCCHIO predictions with the results of two large N-body simulations run from the same set of initial conditions. We focus our attention on quantities most relevant to galaxy formation and large-scale structure studies. PINOCCHIO is able to predict the statistics of merger trees with a typical accuracy of 20 per cent. Its validity extends to higher-order moments of the distribution of progenitors. The agreement is valid also at the object-by-object level, with 70-90 per cent of the progenitors cleanly recognised when the parent halo is cleanly recognised itself. Predictions are presented also for quantities that are usually not reproduced by semi-analytic codes, such as the two-point correlation function of the progenitors of massive haloes and the distribution of initial orbital parameters of merging haloes. For the accuracy of the prediction and for the facility with which merger histories are produced, PINOCCHIO provides a means to generate catalogues of DM haloes which is extremely competitive to large-scale N-body simulations, making it a suitable tool for galaxy formation and large-scale structure studies. △ Less

Submitted 19 September, 2001; originally announced September 2001.

Comments: 12 pages, 10 eps figures included, submitted to MNRAS. PINOCCHIO is available at http://www.daut.univ.trieste.it/pinocchio

Journal ref: Mon.Not.Roy.Astron.Soc. 333 (2002) 623

PINOCCHIO: pinpointing orbit-crossing collapsed hierarchical objects in a linear density field

Authors: P. Monaco, T. Theuns, G. Taffoni

Abstract: PINOCCHIO (PINpointing Orbit-Crossing Collapsed Hierarchical Objects) is a new algorithm for identifying dark matter halos in a given numerical realisation of the linear density field in a hierarchical universe (Monaco et al. 2001). It is shown that Lagrangian perturbation theory, and in particular its ellipsoidal truncation, is able to predict accurately the collapse, in the orbit-crossing sens… ▽ More PINOCCHIO (PINpointing Orbit-Crossing Collapsed Hierarchical Objects) is a new algorithm for identifying dark matter halos in a given numerical realisation of the linear density field in a hierarchical universe (Monaco et al. 2001). It is shown that Lagrangian perturbation theory, and in particular its ellipsoidal truncation, is able to predict accurately the collapse, in the orbit-crossing sense, of generic mass elements. Some points that have undergone orbit crossing are assigned to the network of filaments and sheets that connects the halos; it is demonstrated that this network resembles closely that found in N-body simulations. The code generates a catalogue of dark matter halos with known mass, position, velocity, merging history and angular momentum. It is shown that the predictions of the code are very accurate when compared with the results of large N-body simulations that cover a range of cosmological models, box sizes and numerical resolutions. The mass function is recovered with an accuracy of better than 10 per cent in number density for halos with at least 30-50 particles. A similar accuracy is reached in the estimate of the correlation length r_0. The good agreement is still valid on the object-by-object level, with 70-100 per cent of the objects with more than 50 particles in the simulations also identified by our algorithm. For these objects the masses are recovered with an error of 20-40 per cent, and positions and velocities with a root mean square error of ~1-2 Mpc (0.5-2 grid lengths) and ~100 km/s, respectively. The recovery of the angular momentum of halos is considerably noisier and accuracy at the statistical level is achieved only by introducing free parameters. The algorithm requires negligible computer time as compared with performing a numerical $N$-body simulation. △ Less

Submitted 20 November, 2001; v1 submitted 19 September, 2001; originally announced September 2001.

Comments: 24 pages, 15 eps figures included. Revised to match the version accepted by MNRAS. New appendix added on N-body estimate of halo spins. PINOCCHIO is available at http://www.daut.univ.trieste.it/pinocchio

Journal ref: Mon.Not.Roy.Astron.Soc. 331 (2002) 587

Predicting the number, spatial distribution and merging history of dark matter haloes

Authors: P. Monaco, T. Theuns, G. Taffoni, F. Governato, T. Quinn, J. Stadel

Abstract: We present a new algorithm (PINOCCHIO, PINpointing Orbit-Crossing Collapsed HIerarchical objects) to predict accurately the formation and evolution of individual dark matter haloes in a given realization of an initial linear density field. Compared with the halo population formed in a large (360^3 particles) collisionless simulation of a CDM universe, our method is able to predict to better than… ▽ More We present a new algorithm (PINOCCHIO, PINpointing Orbit-Crossing Collapsed HIerarchical objects) to predict accurately the formation and evolution of individual dark matter haloes in a given realization of an initial linear density field. Compared with the halo population formed in a large (360^3 particles) collisionless simulation of a CDM universe, our method is able to predict to better than 10 per cent statistical quantities such as the mass function, two-point correlation function and progenitor mass function of the haloes. Masses of individual haloes are estimated accurately as well, with errors typically of order 30 per cent in the mass range well resolved by the numerical simulation. These results show that the hierarchical formation of dark matter haloes can be accurately predicted using local approximations to the dynamics when the correlations in the initial density field are properly taken into account. The approach allows one to automatically generate a large ensemble of accurate merging histories of haloes with complete knowledge of their spatial distribution. The construction of the full merger tree for a 256^3 realisation requires a few hours of CPU-time on a personal computer, orders of magnitude faster than the corresponding N-body simulation would take, and without needing any extensive post-processing. The technique can be efficiently used, for instance, for generating the input for galaxy formation modeling. △ Less

Submitted 19 September, 2001; originally announced September 2001.

Comments: 9 pages, 6 eps figures included. ApJ, in press (1 January 2002) PINOCCHIO is available at http://www.daut.univ.trieste.it/pinocchio

Disruption of satellites in cosmological haloes

Authors: Giuliano Taffoni, Lucio Mayer, Monica Colpi, Fabio Governato

Abstract: We investigate how the survival of dark matter satellites inside virialized halos depends on tidal strip** and dynamical friction. We use an analytic approach and then compare the results with N-Body simulations. Both the satellites and the primary halos are similar to cosmological haloes and have NFW density profiles. Satellites can either merge with the primary halo or continue to move on ba… ▽ More We investigate how the survival of dark matter satellites inside virialized halos depends on tidal strip** and dynamical friction. We use an analytic approach and then compare the results with N-Body simulations. Both the satellites and the primary halos are similar to cosmological haloes and have NFW density profiles. Satellites can either merge with the primary halo or continue to move on barely perturbed orbits, eventually being disrupted, depending on the relative strength of friction and tidal forces. We propose that their actual fate depends simply on their mass ratio relative to the primary halo. △ Less

Submitted 3 September, 2001; originally announced September 2001.

Comments: 6 pages, 2 figures to appear in the Proceedings of the Conference "Chemical Enrichment of Intracluster and Intergalactic Medium", ASP conference Series