-
Spiral Magnetic Field and Their Role on Accretion Dynamics in the Circumnuclear Disk of Sagittarius A*: Insight from λ = 850 μm Polarization Imaging
Authors:
Kazuki Sato,
Hiroko Shinnaga,
Ray S. Furuya,
Takeru K. Suzuki,
Kensuke Kakiuchi,
Jürgen Ott
Abstract:
We showcase a study on the physical properties of the Circumnuclear Disk surrounding the Sgr A* of the Galactic Center, emphasizing the role of magnetic field (B field) with 0.47 pc spatial resolution, based on the sensitive λ = 850 μm polarization data taken with the JCMT. The B field within the CND exhibits a coherent spiral pattern. Applying the model described by Wardle and Ko\ddot{o}nigl 1990…
▽ More
We showcase a study on the physical properties of the Circumnuclear Disk surrounding the Sgr A* of the Galactic Center, emphasizing the role of magnetic field (B field) with 0.47 pc spatial resolution, based on the sensitive λ = 850 μm polarization data taken with the JCMT. The B field within the CND exhibits a coherent spiral pattern. Applying the model described by Wardle and Ko\ddot{o}nigl 1990 (WK model) to the observed B field pattern, it favors gas-pressure-dominant models without dismissing a gas-and-B field comparable model, leading us to estimate the B-field strength in the ionized cavity around Sgr A* as 0.24 + 0.05 mG. Analysis -0.04 based on the WK model further allows us to derive representative B-field strengths for the radial, azimuthal, and vertical components as (Br,Bφ,Bz) = (0.4 \pm 0.1,-0.7 \pm 0.2,0.2 \pm 0.05) mG, respectively. A key finding is that the |φ| component is dominant over Br and Bz components, consistent with the spiral morphology, indicating that the CND' s B-field is predominantly toroidal, possibly shaped by accretion dynamics. Considering the turbulent pressure, estimated plasma \{beta} values indicate the effective gas pressure should surpass the magnetic pressure. Assessing the CND of our MWG in the toroidal-and-vertical stability parameter space, we propose that such an "effective" magnetoro-tational instability (MRI) may likely be active. The estimated maximum unstable wavelength, λmax = 0.1 \pm 0.1 pc, is smaller than the CND' s scale height (0.2 \pm 0.1 pc), which indicates the potential for the effective MRI intermittent cycles of \sim 10^{6} years, which should profoundly affect the CND's evolution, considering the estimated mass accretion rate of 10^{-2}M_{\odot} yr^{-1} to the Sgr A*.
△ Less
Submitted 6 July, 2024;
originally announced July 2024.
-
Mineral Detection of Neutrinos and Dark Matter 2024. Proceedings
Authors:
Sebastian Baum,
Patrick Huber,
Patrick Stengel,
Natsue Abe,
Daniel G. Ang,
Lorenzo Apollonio,
Gabriela R. Araujo,
Levente Balogh,
Pranshu Bhaumik Yilda Boukhtouchen,
Joseph Bramante,
Lorenzo Caccianiga,
Andrew Calabrese-Day,
Qing Chang,
Juan I. Collar,
Reza Ebadi,
Alexey Elykov,
Katherine Freese,
Audrey Fung,
Claudio Galelli,
Arianna E. Gleason,
Mariano Guerrero Perez,
Janina Hakenmüller,
Takeshi Hanyu,
Noriko Hasebe,
Shigenobu Hirose
, et al. (35 additional authors not shown)
Abstract:
The second "Mineral Detection of Neutrinos and Dark Matter" (MDvDM'24) meeting was held January 8-11, 2024 in Arlington, VA, USA, hosted by Virginia Tech's Center for Neutrino Physics. This document collects contributions from this workshop, providing an overview of activities in the field. MDvDM'24 was the second topical workshop dedicated to the emerging field of mineral detection of neutrinos a…
▽ More
The second "Mineral Detection of Neutrinos and Dark Matter" (MDvDM'24) meeting was held January 8-11, 2024 in Arlington, VA, USA, hosted by Virginia Tech's Center for Neutrino Physics. This document collects contributions from this workshop, providing an overview of activities in the field. MDvDM'24 was the second topical workshop dedicated to the emerging field of mineral detection of neutrinos and dark matter, following a meeting hosted by IFPU in Trieste, Italy in October 2022. Mineral detectors have been proposed for a wide variety of applications, including searching for dark matter, measuring various fluxes of astrophysical neutrinos over gigayear timescales, monitoring nuclear reactors, and nuclear disarmament protocols; both as paleo-detectors using natural minerals that could have recorded the traces of nuclear recoils for timescales as long as a billion years and as detectors recording nuclear recoil events on laboratory timescales using natural or artificial minerals. Contributions to this proceedings discuss the vast physics potential, the progress in experimental studies, and the numerous challenges lying ahead on the path towards mineral detection. These include a better understanding of the formation and annealing of recoil defects in crystals; identifying the best classes of minerals and, for paleo-detectors, understanding their geology; modeling and control of the relevant backgrounds; develo**, combining, and scaling up imaging and data analysis techniques; and many others. During the last years, MDvDM has grown rapidly and gained attention. Small-scale experimental efforts focused on establishing various microscopic readout techniques are underway at institutions in North America, Europe and Asia. We are looking ahead to an exciting future full of challenges to overcome, surprises to be encountered, and discoveries lying ahead of us.
△ Less
Submitted 2 May, 2024;
originally announced May 2024.
-
Effect of Magnetic diffusion in the Chromosphere on the Solar Wind
Authors:
Masato Matsuoka,
Takeru K. Suzuki,
Takato Tokuno,
Kensuke Kakiuchi
Abstract:
We investigate non-ideal magnetohydrodynamical (MHD) effects in the chromosphere on the solar wind by performing MHD simulations for Alfvén-wave driven winds with explicitly including Ohmic and ambipolar diffusion. We find that MHD waves are significantly damped in the chromosphere by ambipolar diffusion so that the Alfvénic Poynting flux that reaches the corona is substantially reduced. As a resu…
▽ More
We investigate non-ideal magnetohydrodynamical (MHD) effects in the chromosphere on the solar wind by performing MHD simulations for Alfvén-wave driven winds with explicitly including Ohmic and ambipolar diffusion. We find that MHD waves are significantly damped in the chromosphere by ambipolar diffusion so that the Alfvénic Poynting flux that reaches the corona is substantially reduced. As a result, the coronal temperature and the mass loss rate of the solar wind are considerably reduced, compared with those obtained from an ideal MHD case, which is indicative of a great importance of the non-ideal MHD effects in the solar atmosphere. However, the temperature and the mass loss rate are recovered by a small increase in the convection-originated velocity perturbation at the photosphere because of the sensitive dependence of the ambipolar diffusion and reflection of Alfvén waves on the physical properties of the chromosphere. We also find that density perturbations in the corona are reduced by the ambipolar diffusion of Alfvén waves in the chromosphere because the nonlinear generation of compressible perturbations is suppressed.
△ Less
Submitted 8 May, 2024; v1 submitted 27 March, 2024;
originally announced March 2024.
-
A Novel Method to Constrain Tidal Quality Factor from A Non-synchronized Exoplanetary System
Authors:
Takato Tokuno,
Akihiko Fukui,
Takeru K. Suzuki
Abstract:
We propose a novel method to constrain the tidal quality factor, $Q'$, from a non-synchronized star-planet system consisting of a slowly rotating low-mass star and a close-in Jovian planet, taking into account the tidal interaction and the magnetic braking. On the basis of dynamical system theory, the track of the co-evolution of angular momentum for such a system exhibits the existence of a forbi…
▽ More
We propose a novel method to constrain the tidal quality factor, $Q'$, from a non-synchronized star-planet system consisting of a slowly rotating low-mass star and a close-in Jovian planet, taking into account the tidal interaction and the magnetic braking. On the basis of dynamical system theory, the track of the co-evolution of angular momentum for such a system exhibits the existence of a forbidden region in the $Ω_\mathrm{orb}$ -- $Ω_\mathrm{spin}$ plane , where $Ω_\mathrm{spin}$ and $Ω_\mathrm{orb}$ denote the angular velocity of the stellar spin and planetary orbit, respectively. The forbidden region is determined primarily by the strength of the tidal interaction. By comparing ($Ω_\mathrm{orb},Ω_\mathrm{spin}$) of a single star-planet system to the forbidden region, we can constrain the tidal quality factor regardless of the evolutionary history of the system. The application of this method to the star-planet system, NGTS-10 -- NGTS-10 b, gives $Q' \gtrsim 10^8$, leading to an tight upper bound on the tidal torque. Since this cannot be explained by previous theoretical predictions for non-synchronized star-planet systems, our result requires mechanisms that suppress the tidal interaction in such systems.
△ Less
Submitted 12 March, 2024;
originally announced March 2024.
-
Dynamics Near the Inner Dead-Zone Edges in a Proprotoplanetary Disk
Authors:
Kazunari Iwasaki,
Kengo Tomida,
Shinsuke Takasao,
Satoshi Okuzumi,
Takeru K. Suzuki
Abstract:
We perform three-dimensional global non-ideal magnetohydrodynamic simulations of a protoplanetary disk containing the inner dead-zone edge. We take into account realistic diffusion coefficients of the Ohmic resistivity and ambipolar diffusion based on detailed chemical reactions with single-size dust grains. We found that the conventional dead zone identified by the Elsässer numbers of the Ohmic r…
▽ More
We perform three-dimensional global non-ideal magnetohydrodynamic simulations of a protoplanetary disk containing the inner dead-zone edge. We take into account realistic diffusion coefficients of the Ohmic resistivity and ambipolar diffusion based on detailed chemical reactions with single-size dust grains. We found that the conventional dead zone identified by the Elsässer numbers of the Ohmic resistivity and ambipolar diffusion is divided into two regions: "the transition zone" and "the coherent zone". The coherent zone has the same properties as the conventional dead zone, and extends outside of the transition zone in the radial direction. Between the active and coherent zones, we discover the transition zone, the inner edge of which is identical to that of the conventional dead zone. The transition zone extends out over the regions where thermal ionization determines diffusion coefficients. The transition zone has completely different physical properties than the conventional dead zone, the so-called undead zone, and the zombie zone. The combination of amplification of the radial magnetic field owing to the ambipolar diffusion and a steep radial gradient of the Ohmic diffusivity causes the efficient evacuation of the net vertical magnetic flux from the transition zone within several rotations. Surface gas accretion occurs in the coherent zone but not in the transition zone. The presence of the transition zone prohibits mass and magnetic flux transport from the coherent zone to the active zone. Mass accumulation occurs at both edges of the transition zone as a result of mass supply from the active and coherent zones.
△ Less
Submitted 8 June, 2024; v1 submitted 8 January, 2024;
originally announced January 2024.
-
Evolution of Tidal Disruption Event Disks with Magnetically Driven Winds
Authors:
T. Mageshwaran,
Kimitake Hayasaki,
Takeru K. Suzuki
Abstract:
We present a time-dependent, one-dimensional magnetically driven disk-wind model based on magnetohydrodynamical (MHD) equations in the context of tidal disruption events (TDEs). We assume that the disk is geometrically thin and gas-pressure dominant and explicitly take into account magnetic braking as well as turbulent viscosity by an extended alpha viscosity prescription. We find a particular win…
▽ More
We present a time-dependent, one-dimensional magnetically driven disk-wind model based on magnetohydrodynamical (MHD) equations in the context of tidal disruption events (TDEs). We assume that the disk is geometrically thin and gas-pressure dominant and explicitly take into account magnetic braking as well as turbulent viscosity by an extended alpha viscosity prescription. We find a particular wind solution for a set of basic equations that satisfies the necessary and sufficient conditions for vertically unbound MHD flows. The solution demonstrates that the disk evolves with losing mass due to wind and accretion from the initial Gaussian density distribution. We confirm that the mass accretion rate follows the power law of time $t^{-19/16}$ at late times if the wind is absent, which corresponds to the classical solution of Cannizzo et al. (1990). We find that the mass accretion rate is steeper than the $t^{-19/16}$ curve if the disk wind is present. This is because the wind removes a significant fraction of the mass and angular momentum. Mass accretion is further induced by magnetic braking, known as a wind-driven accretion mechanism, resulting in more rapid decay with time in both the mass accretion and loss rates. The ultraviolet (UV) luminosity is the highest among the optical, UV, and X-ray luminosities from early to late evolutionary phases, suggesting optical and X-ray emissions from the disk are observationally insignificant due to magnetically driven winds in TDEs. Our model predicts that late-time bolometric light curves steeper than $t^{-19/16}$ in UV-bright TDEs potentially serve as compelling indicators for magnetically driven winds.
△ Less
Submitted 24 December, 2023;
originally announced December 2023.
-
MHD Simulation in Galactic Center Region with Radiative Cooling and Heating
Authors:
Kensuke Kakiuchi,
Takeru. K. Suzuki,
Shu-ichiro Inutsuka,
Tsuyoshi Inoue,
Jiro Shimoda
Abstract:
We investigate the role of magnetic field on the gas dynamics in a galactic bulge region by three dimensional simulations with radiative cooling and heating. While high-temperature corona with $T>10^6\ {\rm K}$ is formed in the halo regions, the temperature near the mid-plane is $\lesssim 10^4\ {\rm K}$ following the thermal equilibrium curve determined by the radiative cooling and heating. Althou…
▽ More
We investigate the role of magnetic field on the gas dynamics in a galactic bulge region by three dimensional simulations with radiative cooling and heating. While high-temperature corona with $T>10^6\ {\rm K}$ is formed in the halo regions, the temperature near the mid-plane is $\lesssim 10^4\ {\rm K}$ following the thermal equilibrium curve determined by the radiative cooling and heating. Although the thermal energy of the interstellar gas is lost by radiative cooling, the saturation level of the magnetic field strength does not significantly depend on the radiative cooling and heating. The magnetic field strength is amplified to $10\ {\rm μG}$ on average, and reaches several hundred ${\rm μG}$ locally. We find the formation of magnetically dominated regions at mid-latitudes in the case with the radiative cooling and heating, which is not seen in the case without radiative effect. The vertical thickness of the mid-latitude regions is $50-150\ {\rm pc}$ at the radial location of $0.4-0.8\ {\rm kpc}$ from the galactic center, which is comparable to the observed vertical distribution of neutral atomic gas. When we take the average of different components of energy density integrated over the galactic bulge region, the magnetic energy is comparable to the thermal energy. We conclude that the magnetic field plays a substantial role in controlling the dynamical and thermal properties of the galactic bulge region.
△ Less
Submitted 4 April, 2024; v1 submitted 27 June, 2023;
originally announced June 2023.
-
MHD in a cylindrical shearing box II: Intermittent Bursts and Substructures in MRI Turbulence
Authors:
Takeru K. Suzuki
Abstract:
By performing ideal magnetohydrodynamical (MHD) simulations with weak vertical magnetic fields in unstratified cylindrical shearing boxes with modified boundary treatment, we investigate MHD turbulence excited by magnetorotational instability. The cylindrical simulation exhibits extremely large temporal variation in the magnetic activity compared to the simulation in a normal Cartesian shearing bo…
▽ More
By performing ideal magnetohydrodynamical (MHD) simulations with weak vertical magnetic fields in unstratified cylindrical shearing boxes with modified boundary treatment, we investigate MHD turbulence excited by magnetorotational instability. The cylindrical simulation exhibits extremely large temporal variation in the magnetic activity compared to the simulation in a normal Cartesian shearing box, although the time-averaged field strengths are comparable in the cylindrical and Cartesian setups. Detailed analysis of the terms describing magnetic-energy evolution with "triangle diagrams" surprisingly reveals that in the cylindrical simulation the compression of toroidal magnetic field is unexpectedly as important as the winding due to differential rotation in amplifying magnetic fields and triggering intermittent magnetic bursts, which are not seen in the Cartesian simulation. The importance of the compressible amplification is also true for a cylindrical simulation with tiny curvature; the evolution of magnetic fields in the nearly Cartesian shearing box simulation is fundamentally different from that in the exact Cartesian counterpart. The radial gradient of epicycle frequency, $κ$, which cannot be considered in the normal Cartesian shearing box model, is the cause of this fundamental difference. An additional consequence of the spatial variation of $κ$ is continuous and ubiquitous formation of narrow high(low)-density and weak(strong)-field localized structures; seeds of these ring-gap structures are created by the compressible effect and subsequently amplified and maintained under the marginally unstable condition regarding "viscous-type" instability.
△ Less
Submitted 3 November, 2023; v1 submitted 20 May, 2023;
originally announced May 2023.
-
Simulations of Protoplanetary Disk Dispersal: Stellar Mass Dependence of the Disk Lifetime
Authors:
A. Komaki,
S. Fukuhara,
T. K. Suzuki,
N. Yoshida
Abstract:
Recent infrared and submillimeter observations suggest that the protoplanetary disk lifetime depends on the central stellar mass. The disk dispersal is thought to be driven by viscous accretion, magneto-hydrodynamics (MHD) winds, and photoevaporation by the central star. We perform a set of one-dimensional simulations of long-term disk evolution that include all the three processes. We vary the st…
▽ More
Recent infrared and submillimeter observations suggest that the protoplanetary disk lifetime depends on the central stellar mass. The disk dispersal is thought to be driven by viscous accretion, magneto-hydrodynamics (MHD) winds, and photoevaporation by the central star. We perform a set of one-dimensional simulations of long-term disk evolution that include all the three processes. We vary the stellar mass in the range of 0.5-7M$_{\odot}$, and study the mass dependence of the disk evolution. We show that a significant fraction of the disk gas is lost by MHD winds in the early stage, but the later disk evolution is mainly governed by photoevaporation. The disk radius decreases as photoevaporation clears out the gas in the outer disk efficiently. The qualitative evolutionary trends of the disk mass are remarkably similar for the wide range of the central stellar mass we consider, and the time evolution of the disk mass can be well fitted by a simple function. The dispersal time is approximately ten million years for low mass stars with weak mass dependence, but gets as short as two million years around a 7M$_{\odot}$ star. In the latter case, a prominent inner hole is formed by the combined effect of accretion and MHD winds within about one million years. The strength of the MHD wind and viscous accretion controls the overall mass-loss rate, but does not alter the dependence of the dispersal timescale on the central stellar mass.
△ Less
Submitted 26 April, 2023;
originally announced April 2023.
-
Coronal Loops with Different Metallicities and Generalized RTV Scaling Laws
Authors:
Haruka Washinoue,
Takeru K. Suzuki
Abstract:
Stellar metallicity is a critical factor to characterize the stellar coronae because it directly affects the radiative energy loss from the atmosphere. By extending theoretical relations for solar coronal loops introduced by \cite{Rosner1978}, we analytically derive scaling relations for stellar coronal loops with various metallicities. In order to validate the derived relations, we also perform m…
▽ More
Stellar metallicity is a critical factor to characterize the stellar coronae because it directly affects the radiative energy loss from the atmosphere. By extending theoretical relations for solar coronal loops introduced by \cite{Rosner1978}, we analytically derive scaling relations for stellar coronal loops with various metallicities. In order to validate the derived relations, we also perform magnetohydrodyamic simulations for the heating of coronal loops with different metallicities by changing radiative loss functions according to the adopted elemental abundances. The simulation results nicely explain the generalized analytical scaling relations and show a strong dependence of the thermodynamical and radiative properties of the loops on metallicity. Higher density and temperature are obtained in lower-metallicity coronae because of the inefficient radiative cooling, provided that the surface condition is unchanged. Thus, it is estimated that the X-ray radiation from metal-poor coronae is higher because of their denser coronal gas. The generalized scaling laws can also be used as a tool to study the condition of high-energy radiation around magnetically active stars and their impact on planetary environments.
△ Less
Submitted 25 June, 2023; v1 submitted 30 March, 2023;
originally announced March 2023.
-
Mineral Detection of Neutrinos and Dark Matter. A Whitepaper
Authors:
Sebastian Baum,
Patrick Stengel,
Natsue Abe,
Javier F. Acevedo,
Gabriela R. Araujo,
Yoshihiro Asahara,
Frank Avignone,
Levente Balogh,
Laura Baudis,
Yilda Boukhtouchen,
Joseph Bramante,
Pieter Alexander Breur,
Lorenzo Caccianiga,
Francesco Capozzi,
Juan I. Collar,
Reza Ebadi,
Thomas Edwards,
Klaus Eitel,
Alexey Elykov,
Rodney C. Ewing,
Katherine Freese,
Audrey Fung,
Claudio Galelli,
Ulrich A. Glasmacher,
Arianna Gleason
, et al. (44 additional authors not shown)
Abstract:
Minerals are solid state nuclear track detectors - nuclear recoils in a mineral leave latent damage to the crystal structure. Depending on the mineral and its temperature, the damage features are retained in the material from minutes (in low-melting point materials such as salts at a few hundred degrees C) to timescales much larger than the 4.5 Gyr-age of the Solar System (in refractory materials…
▽ More
Minerals are solid state nuclear track detectors - nuclear recoils in a mineral leave latent damage to the crystal structure. Depending on the mineral and its temperature, the damage features are retained in the material from minutes (in low-melting point materials such as salts at a few hundred degrees C) to timescales much larger than the 4.5 Gyr-age of the Solar System (in refractory materials at room temperature). The damage features from the $O(50)$ MeV fission fragments left by spontaneous fission of $^{238}$U and other heavy unstable isotopes have long been used for fission track dating of geological samples. Laboratory studies have demonstrated the readout of defects caused by nuclear recoils with energies as small as $O(1)$ keV. This whitepaper discusses a wide range of possible applications of minerals as detectors for $E_R \gtrsim O(1)$ keV nuclear recoils: Using natural minerals, one could use the damage features accumulated over $O(10)$ Myr$-O(1)$ Gyr to measure astrophysical neutrino fluxes (from the Sun, supernovae, or cosmic rays interacting with the atmosphere) as well as search for Dark Matter. Using signals accumulated over months to few-years timescales in laboratory-manufactured minerals, one could measure reactor neutrinos or use them as Dark Matter detectors, potentially with directional sensitivity. Research groups in Europe, Asia, and America have started develo** microscopy techniques to read out the $O(1) - O(100)$ nm damage features in crystals left by $O(0.1) - O(100)$ keV nuclear recoils. We report on the status and plans of these programs. The research program towards the realization of such detectors is highly interdisciplinary, combining geoscience, material science, applied and fundamental physics with techniques from quantum information and Artificial Intelligence.
△ Less
Submitted 16 May, 2023; v1 submitted 17 January, 2023;
originally announced January 2023.
-
Collisional Growth and Fragmentation of Dust Aggregates. II. Mass Distribution of Icy Fragments
Authors:
Yukihiko Hasegawa,
Takeru K. Suzuki,
Hidekazu Tanaka,
Hiroshi Kobayashi,
Koji Wada
Abstract:
By performing $N$-body simulations, we investigated fundamental processes of collisions between dust aggregates composed of submicron-sized icy dust monomers. We examined the mass distribution of fragments in the collisional outcomes in a wide range of the mass ratio and the collision velocity between colliding dust aggregates. We derived analytic expressions of the mass distribution of large remn…
▽ More
By performing $N$-body simulations, we investigated fundamental processes of collisions between dust aggregates composed of submicron-sized icy dust monomers. We examined the mass distribution of fragments in the collisional outcomes in a wide range of the mass ratio and the collision velocity between colliding dust aggregates. We derived analytic expressions of the mass distribution of large remnants and small fragments by numerical fitting to the simulation results. Our analytic formulae for masses of the large remnants can reproduce the contribution of mass transfer from a large target to a small projectile, which occurs for a mass ratio of $\gtrsim 3$ and is shown in a previous study (Hasegawa et al. 2021). We found that the power-law index of the cumulative mass distribution of the small fragments is independent of the mass ratio and only weakly dependent on the collision velocity. On the other hand, the mass fraction of fragments of individual dust monomers decreases with an increasing total mass of colliding aggregates for a fixed mass ratio. This tendency implies that multiple hierarchical disruptive collisions (i.e., collisions between fragments, collisions between fragments of fragments) are required for producing a large amount of individual dust monomers via collisional fragmentation. Our fragment model suggests that the total geometric cross section integrated over the fragments is estimated to be about the same order of the geometric cross section of the target.
△ Less
Submitted 21 December, 2022;
originally announced December 2022.
-
Transition of latitudinal differential rotation as a possible cause of weakened magnetic braking of solar-type stars
Authors:
Takato Tokuno,
Takeru K. Suzuki,
Munehito Shoda
Abstract:
We investigate the role of latitudinal differential rotation (DR) in the spin evolution of solar-type stars. Recent asteroseismic observation detected the strong equator-fast DR in some solar-type stars. Numerical simulations show that the strong equator-fast DR is a typical feature of young fast-rotating stars and that this tendency is gradually reduced with stellar age. Incorporating these prope…
▽ More
We investigate the role of latitudinal differential rotation (DR) in the spin evolution of solar-type stars. Recent asteroseismic observation detected the strong equator-fast DR in some solar-type stars. Numerical simulations show that the strong equator-fast DR is a typical feature of young fast-rotating stars and that this tendency is gradually reduced with stellar age. Incorporating these properties, we develop a model for the long-term evolution of stellar rotation. The magnetic braking is assumed to be regulated dominantly by the rotation rate in the low-latitude region. Therefore, in our model, stars with the equator-fast DR spin down more efficiently than those with the rigid-body rotation. We calculate the evolution of stellar rotation in ranges of stellar mass, $0.9 \, \mathrm{M}_{\odot} \le M \le 1.2\, \mathrm{M}_{\odot}$, and metallicity, $0.5\, \mathrm{Z}_{\odot} \le Z \le 2\, \mathrm{Z}_{\odot}$, where $\mathrm{M}_{\odot}$ and $\mathrm{Z}_{\odot}$ are the solar mass and metallicity, respectively. Our model, using the observed torque in the present solar wind, nicely explains both the current solar rotation and the average trend of the rotation of solar-type stars, including the dependence on metallicity. In addition, our model naturally reproduces the observed trend of the weakened magnetic braking in old slowly rotating solar-type stars because strong equator-fast DR becomes reduced. Our results indicate that LDR and its transition are essential factors that control the stellar spin down.
△ Less
Submitted 28 February, 2023; v1 submitted 24 November, 2022;
originally announced November 2022.
-
Role of Longitudinal Waves in Alfven-wave-driven Solar/Stellar Wind
Authors:
Kimihiko Shimizu,
Munehito Shoda,
Takeru K. Suzuki
Abstract:
We study the role the the p-mode-like vertical oscillation on the photosphere in driving solar winds in the framework of Alfven-wave-driven winds. By performing one-dimensional magnetohydrodynamical numerical simulations from the photosphere to the interplanetary space, we discover that the mass-loss rate is raised up to 4 times as the amplitude of longitudinal perturbations at the photosphere inc…
▽ More
We study the role the the p-mode-like vertical oscillation on the photosphere in driving solar winds in the framework of Alfven-wave-driven winds. By performing one-dimensional magnetohydrodynamical numerical simulations from the photosphere to the interplanetary space, we discover that the mass-loss rate is raised up to 4 times as the amplitude of longitudinal perturbations at the photosphere increases. When the longitudinal fluctuation is added, transverse waves are generated by the mode conversion from longitudinal waves in the chromosphere, which increases Alfvenic Poynting flux in the corona. As a result, the coronal heating is enhanced to yield higher coronal density by the chromospheric evaporation, leading to the increase of the mass-loss rate. Our findings clearly show the importance of the p-mode oscillation in the photosphere and the mode conversion in the chromosphere in determining the basic properties of the wind from the sun and solar-type stars.
△ Less
Submitted 9 November, 2022;
originally announced November 2022.
-
Three-dimensional Simulations of Magnetospheric Accretion in a T Tauri Star: Accretion and Wind Structures Just Around Star
Authors:
Shinsuke Takasao,
Kengo Tomida,
Kazunari Iwasaki,
Takeru K. Suzuki
Abstract:
We perform three-dimensional magnetohydrodynamic simulations of magnetospheric accretion in a T Tauri star to study the accretion and wind structures in the close vicinity of the star. The gas accreting onto the star consists of the gas from the magnetospheric boundary and the failed disk winds. The accreting gas is commonly found as a multi-column accretion, which is consistent with observations.…
▽ More
We perform three-dimensional magnetohydrodynamic simulations of magnetospheric accretion in a T Tauri star to study the accretion and wind structures in the close vicinity of the star. The gas accreting onto the star consists of the gas from the magnetospheric boundary and the failed disk winds. The accreting gas is commonly found as a multi-column accretion, which is consistent with observations. A significant fraction of the angular momentum of the accreting flows is removed by the magnetic fields of conical disk winds and turbulent failed winds inside and near the magnetosphere. As a result, the accretion torque is significantly reduced compared to the simple estimation based on the mass accretion rate. The stellar spin affects the time variability of the conical disk wind by changing the stability condition of the magnetospheric boundary. However, the time-averaged magnetospheric radius only weakly depends on the stellar spin, which is unlike the prediction of classical theories that the stellar spin controls the magnetospheric radius through the magnetic torque. The ratio of the toroidal to the poloidal field strengths at the magnetospheric boundary, which is a key parameter for the magnetic torque, is also insensitive to the spin; it is rather determined by the disk dynamics. Considering newly found three-dimensional effects, we obtain a scaling relation of the magnetospheric radius very similar to the Ghosh & Lamb relation from the steady angular momentum transport equation.
△ Less
Submitted 2 November, 2022;
originally announced November 2022.
-
The Effect of the Chromospheric Temperature on Coronal Heating
Authors:
Haruka Washinoue,
Munehito Shoda,
Takeru K. Suzuki
Abstract:
Recent observational and numerical studies show a variety of thermal structures in the solar chromosphere. Given that the thermal interplay across the transition region is a key to coronal heating, it is worth investigating how different thermal structures of the chromosphere yield different coronal properties. In this work, by MHD simulations of Alfvén-wave heating of coronal loops, we study how…
▽ More
Recent observational and numerical studies show a variety of thermal structures in the solar chromosphere. Given that the thermal interplay across the transition region is a key to coronal heating, it is worth investigating how different thermal structures of the chromosphere yield different coronal properties. In this work, by MHD simulations of Alfvén-wave heating of coronal loops, we study how the coronal properties are affected by the chromospheric temperature. To this end, instead of solving the radiative transfer equation, we employ a simple radiative loss function so that the chromospheric temperature is easily tuned. When the chromosphere is hotter, because the chromosphere extends to a larger height, the coronal part of the magnetic loop becomes shorter, which enhances the conductive cooling. A larger loop length is therefore required to maintain the high-temperature corona against the thermal conduction. From our numerical simulations we derive a condition for the coronal formation with respect to the half loop length $l_{\rm loop}$ in a simple form: $l_{\rm loop} > a T_{\rm min} + l_{\rm th}$, where $T_{\rm min}$ is the minimum temperature in the atmosphere and parameters $a$ and $l_{\rm th}$ have negative dependencies on the coronal field strength. Our conclusion is that the chromospheric temperature has a non-negligible impact on coronal heating for loops with small length and weak coronal field. In particular, the enhanced chromospheric heating could prevent the formation of the corona.
△ Less
Submitted 4 October, 2022; v1 submitted 21 September, 2022;
originally announced September 2022.
-
Neutron Tagging following Atmospheric Neutrino Events in a Water Cherenkov Detector
Authors:
K. Abe,
Y. Haga,
Y. Hayato,
K. Hiraide,
K. Ieki,
M. Ikeda,
S. Imaizumi,
K. Iyogi,
J. Kameda,
Y. Kanemura,
Y. Kataoka,
Y. Kato,
Y. Kishimoto,
S. Miki,
S. Mine,
M. Miura,
T. Mochizuki,
S. Moriyama,
Y. Nagao,
M. Nakahata,
T. Nakajima,
Y. Nakano,
S. Nakayama,
T. Okada,
K. Okamoto
, et al. (281 additional authors not shown)
Abstract:
We present the development of neutron-tagging techniques in Super-Kamiokande IV using a neural network analysis. The detection efficiency of neutron capture on hydrogen is estimated to be 26%, with a mis-tag rate of 0.016 per neutrino event. The uncertainty of the tagging efficiency is estimated to be 9.0%. Measurement of the tagging efficiency with data from an Americium-Beryllium calibration agr…
▽ More
We present the development of neutron-tagging techniques in Super-Kamiokande IV using a neural network analysis. The detection efficiency of neutron capture on hydrogen is estimated to be 26%, with a mis-tag rate of 0.016 per neutrino event. The uncertainty of the tagging efficiency is estimated to be 9.0%. Measurement of the tagging efficiency with data from an Americium-Beryllium calibration agrees with this value within 10%. The tagging procedure was performed on 3,244.4 days of SK-IV atmospheric neutrino data, identifying 18,091 neutrons in 26,473 neutrino events. The fitted neutron capture lifetime was measured as 218 \pm 9 μs.
△ Less
Submitted 20 September, 2022; v1 submitted 18 September, 2022;
originally announced September 2022.
-
Role of Longitudinal Waves in Alfvén-wave-driven Solar Wind
Authors:
Kimihiko Shimizu,
Munehito Shoda,
Takeru K. Suzuki
Abstract:
We revisit the role of longitudinal waves in driving the solar wind. We study how the the $p$-mode-like vertical oscillation on the photosphere affects the properties of solar winds under the framework of Alfvén-wave-driven winds. We perform a series of one-dimensional magnetohydrodynamical numerical simulations from the photosphere to beyond several tens of solar radii. We find that the mass-loss…
▽ More
We revisit the role of longitudinal waves in driving the solar wind. We study how the the $p$-mode-like vertical oscillation on the photosphere affects the properties of solar winds under the framework of Alfvén-wave-driven winds. We perform a series of one-dimensional magnetohydrodynamical numerical simulations from the photosphere to beyond several tens of solar radii. We find that the mass-loss rate drastically increases with the longitudinal wave amplitude at the photosphere up to $\sim 4$ times, in contrast to the classical understanding that the acoustic wave hardly affects the energetics of the solar wind. The addition of the longitudinal fluctuation induces the longitudinal-to-transverse wave mode conversion in the chromosphere, which results in the enhanced Alfvénic Poynting flux in the corona. Consequently, the coronal heating is promoted to give higher coronal density by the chromospheric evaporation, leading to the increased mass-loss rate. This study clearly shows the importance of the longnitudinal oscillation in the photosphere and the mode conversion in the chromosphere in determining the basic properties of the wind from solar-like stars.
△ Less
Submitted 29 March, 2022;
originally announced March 2022.
-
Rapid-then-slow migration reproduces mass distribution of TRAPPIST-1 system
Authors:
Masahiro Ogihara,
Eiichiro Kokubo,
Ryuunosuke Nakano,
Takeru K. Suzuki
Abstract:
The TRAPPIST-1 system is an iconic planetary system in various aspects (e.g., habitability, resonant relation, and multiplicity) and hence has attracted considerable attention. The mass distribution of the TRAPPIST-1 planets is characterized by two features: the two inner planets are large, and the masses of the four planets in the outer orbit increase with orbital distance. The origin of these fe…
▽ More
The TRAPPIST-1 system is an iconic planetary system in various aspects (e.g., habitability, resonant relation, and multiplicity) and hence has attracted considerable attention. The mass distribution of the TRAPPIST-1 planets is characterized by two features: the two inner planets are large, and the masses of the four planets in the outer orbit increase with orbital distance. The origin of these features cannot be explained by previous formation models. We investigate whether the mass distribution of the TRAPPIST-1 system can be reproduced by a planet formation model using N-body simulations. We used a gas disk evolution model around a low-mass star constructed by considering disk winds and followed the growth and orbital migration from planetary embryos with the isolation mass, which increases with orbital distance. As a result, we find that from the initial phase, planets in inner orbits undergo rapid orbital migration, and the coalescence growth near the inner disk edge is enhanced. This allows the inner planets to grow larger. Meanwhile, compared with the inner planets, planets in outer orbits migrate more slowly and do not frequently collide with neighboring planets. Therefore, the trend of increasing mass toward the outer orbit, called reversed mass ranking, is maintained. The final mass distribution approximately agrees with the two features of the mass distribution in the TRAPPIST-1 system. We discover that the mass distribution in the TRAPPIST-1 system can be reproduced when embryos experience rapid migration and become trapped near the disk inner edge, and then more massive embryos undergo slower migration. This migration transition can be achieved naturally in a disk evolution model with disk winds.
△ Less
Submitted 21 January, 2022;
originally announced January 2022.
-
Coronal Properties of Low-mass Population III Stars and the Radiative Feedback in the Early Universe
Authors:
Haruka Washinoue,
Takeru K. Suzuki
Abstract:
We systematically investigated the heating of coronal loops on metal-free stars with various stellar masses and magnetic fields by magnetohydrodynamic simulations. It is found that the coronal property is dependent on the coronal magnetic field strength $B_{\rm c}$ because it affects the difference of the nonlinearity of the Alfvénic waves. Weaker $B_{\rm c}$ leads to cooler and less dense coronae…
▽ More
We systematically investigated the heating of coronal loops on metal-free stars with various stellar masses and magnetic fields by magnetohydrodynamic simulations. It is found that the coronal property is dependent on the coronal magnetic field strength $B_{\rm c}$ because it affects the difference of the nonlinearity of the Alfvénic waves. Weaker $B_{\rm c}$ leads to cooler and less dense coronae because most of the input waves dissipate in the lower atmosphere on account of the larger nonlinearity. Accordingly EUV and X-ray luminosities also correlate with $B_{\rm c}$, while they are emitted in a wide range of the field strength. Finally we extend our results to evaluating the contribution from low-mass Population III coronae to the cosmic reionization. Within the limited range of our parameters on magnetic fields and loop lengths, the EUV and X-ray radiations give a weak impact on the ionization and heating of the gas at high redshifts. However, there still remains a possibility of the contribution to the reionization from energetic flares involving long magnetic loops.
△ Less
Submitted 23 June, 2021;
originally announced June 2021.
-
Collisional Growth and Fragmentation of Dust Aggregates with Low Mass Ratios. I: Critical Collision Velocity for Water Ice
Authors:
Yukihiko Hasegawa,
Takeru K. Suzuki,
Hidekazu Tanaka,
Hiroshi Kobayashi,
Koji Wada
Abstract:
We investigated fundamental processes of collisional sticking and fragmentation of dust aggregates by carrying out N-body simulations of submicron-sized icy dust monomers. We examined the condition for collisional growth of two colliding dust aggregates in a wide range of the mass ratio, 1-64. We found that the mass transfer from a larger dust aggregate to a smaller one is a dominant process in co…
▽ More
We investigated fundamental processes of collisional sticking and fragmentation of dust aggregates by carrying out N-body simulations of submicron-sized icy dust monomers. We examined the condition for collisional growth of two colliding dust aggregates in a wide range of the mass ratio, 1-64. We found that the mass transfer from a larger dust aggregate to a smaller one is a dominant process in collisions with a mass ratio of 2-30 and impact velocity of \approx 30-170 m s^-1. As a result, the critical velocity, v_fra, for fragmentation of the largest body is considerably reduced for such unequal-mass collisions; v_fra of collisions with a mass ratio of 3 is about half of that obtained from equal-mass collisions. The impact velocity is generally higher for collisions between dust aggregates with higher mass ratios because of the difference between the radial drift velocities in the typical condition of protoplanetary disks. Therefore, the reduced v_fra for unequal-mass collisions would delay growth of dust grains in the inner region of protoplanetary disks.
△ Less
Submitted 14 April, 2021;
originally announced April 2021.
-
Photoevaporative Dispersal of Protoplanetary Disks around Evolving Intermediate-mass Stars
Authors:
Masanobu Kunitomo,
Shigeru Ida,
Taku Takeuchi,
Olja Panić,
James M. Miley,
Takeru K. Suzuki
Abstract:
We aim to understand the effect of stellar evolution on the evolution of protoplanetary disks. We focus in particular on the disk evolution around intermediate-mass (IM) stars, which evolve more rapidly than low-mass ones. We numerically solve the long-term evolution of disks around 0.5-5 solar-mass stars considering viscous accretion and photoevaporation (PE) driven by stellar far-ultraviolet (FU…
▽ More
We aim to understand the effect of stellar evolution on the evolution of protoplanetary disks. We focus in particular on the disk evolution around intermediate-mass (IM) stars, which evolve more rapidly than low-mass ones. We numerically solve the long-term evolution of disks around 0.5-5 solar-mass stars considering viscous accretion and photoevaporation (PE) driven by stellar far-ultraviolet (FUV), extreme-ultraviolet (EUV), and X-ray emission. We also take stellar evolution into account and consider the time evolution of the PE rate. We find that the FUV, EUV, and X-ray luminosities of IM stars evolve by orders of magnitude within a few Myr along with the time evolution of stellar structure, stellar effective temperature, or accretion rate. Therefore, the PE rate also evolves with time by orders of magnitude, and we conclude that stellar evolution is crucial for the disk evolution around IM stars.
△ Less
Submitted 13 March, 2021;
originally announced March 2021.
-
Near-infrared Brightening around the Periastron Passages of the Gamma-ray Binary PSR B1259$-$63 /LS 2883
Authors:
A. Kawachi,
Y. Moritani,
A. T. Okazaki,
H. Yoshida,
K. Suzuki
Abstract:
The binary of the pulsar PSRB1259$-$63 and the Be star LS 2883 has been observed at the 2010 and 2014 periastron passages in the near-infrared (NIR) bands using the IRSF/SIRIUS and SIRPOL. The light curves in the J-,H-, and Ks-bands are almost identical in these periastron passages. A flare starts no later than 10 days before periastron and the maximum brightening of about 0.1 magnitude is observe…
▽ More
The binary of the pulsar PSRB1259$-$63 and the Be star LS 2883 has been observed at the 2010 and 2014 periastron passages in the near-infrared (NIR) bands using the IRSF/SIRIUS and SIRPOL. The light curves in the J-,H-, and Ks-bands are almost identical in these periastron passages. A flare starts no later than 10 days before periastron and the maximum brightening of about 0.1 magnitude is observed 12--17 days after periastron. The rising part of the light curve is steeper and reaches a peak slightly earlier in the Ks-band than in the other bands, thus a characteristic track appears on the NIR color-magnitude diagram. The time lag between the NIR light curves indicates that the variation in the Be circumstellar disk first occurs in an outer region. We propose that the initial rapid contraction followed by the gradual expansion of the disk is evoked by the rapidly changing tidal torque around periastron and the resultant change of the optically thick area causes the observed NIR light curves.
△ Less
Submitted 8 March, 2021;
originally announced March 2021.
-
Development of the new multi-beam receiver and telescope control system for NASCO
Authors:
Atsushi Nishimura,
Akio Ohama,
Kimihiro Kimura,
Daichi Tsutsumi,
Yudai Matsue,
Rin Yamada,
Mariko Sakamoto,
Kenta Matsunaga,
Yutaka Hasegawa,
Taisei Minami,
Takeru Matsumoto,
Kazuki Shiotani,
So Okuda,
Kakeru Fujishiro,
Keisuke Sakasai,
Masahiro Suzuki,
Shun Saeki,
Kouki Satani,
Kousuke Urushihara,
Chiharu Kato,
Takashi Kondo,
Kazuki Okawa,
Daiki Kurita,
Tetsuta Inaba,
Shohei Maruyama
, et al. (37 additional authors not shown)
Abstract:
We report the current status of the NASCO (NAnten2 Super CO survey as legacy) project which aims to provide all-sky CO data cube of southern hemisphere using the NANTEN2 4-m submillimeter telescope installed at the Atacama Desert through develo** a new multi-beam receiver and a new telescope control system. The receiver consists of 5 beams. The four beams, located at the four corners of a square…
▽ More
We report the current status of the NASCO (NAnten2 Super CO survey as legacy) project which aims to provide all-sky CO data cube of southern hemisphere using the NANTEN2 4-m submillimeter telescope installed at the Atacama Desert through develo** a new multi-beam receiver and a new telescope control system. The receiver consists of 5 beams. The four beams, located at the four corners of a square with the beam separation of 720$''$, are installed with a 100 GHz band SIS receiver having 2-polarization sideband-separation filter. The other beam, located at the optical axis, is installed with a 200 GHz band SIS receiver having 2-polarization sideband-separation filter. The cooled component is modularized for each beam, and cooled mirrors are used. The IF bandwidths are 8 and 4 GHz for 100 and 200 GHz bands, respectively. Using XFFTS spectrometers with a bandwidth of 2 GHz, the lines of $^{12}$CO, $^{13}$CO, and C$^{18}$O of $J$=1$-$0 or $J$=2$-$1 can be observed simultaneously for each beam. The control system is reconstructed on the ROS architecture, which is an open source framework for robot control, to enable a flexible observation mode and to handle a large amount of data. The framework is commonly used and maintained in a robotic field, and thereby reliability, flexibility, expandability, and efficiency in development are improved as compared with the system previously used. The receiver and control system are installed on the NANTEN2 telescope in December 2019, and its commissioning and science verification are on-going. We are planning to start science operation in early 2021.
△ Less
Submitted 1 December, 2020; v1 submitted 30 November, 2020;
originally announced November 2020.
-
Waveguide-Type Multiplexer for Multiline Observation of Atmospheric Molecules using Millimeter-Wave Spectroradiometer
Authors:
Taku Nakajima,
Kohei Haratani,
Akira Mizuno,
Kazuji Suzuki,
Takafumi Kojima,
Yoshinori Uzawa,
Shin'ichiro Asayama,
Issei Watanabe
Abstract:
In order to better understand the variation mechanism of ozone abundance in the middle atmosphere, the simultaneous monitoring of ozone and other minor molecular species, which are related to ozone depletion, is the most fundamental and critical method. A waveguide-type multiplexer was developed for the expansion of the observation frequency range of a millimeter-wave spectroradiometer, for the si…
▽ More
In order to better understand the variation mechanism of ozone abundance in the middle atmosphere, the simultaneous monitoring of ozone and other minor molecular species, which are related to ozone depletion, is the most fundamental and critical method. A waveguide-type multiplexer was developed for the expansion of the observation frequency range of a millimeter-wave spectroradiometer, for the simultaneous observation of multiple molecular spectral lines. The proposed multiplexer contains a cascaded four-stage sideband-separating filter circuit. The waveguide circuit was designed based on electromagnetic analysis, and the pass frequency bands of Stages 1-4 were 243-251 GHz, 227-235 GHz, 197-205 GHz, and 181-189 GHz. The insertion and return losses of the multiplexer were measured using vector network analyzers, each observation band was well-defined, and the bandwidths were appropriately specified. Moreover, the receiver noise temperature and the image rejection ratio (IRR) using the superconducting mixer at 4 K were measured. As a result, the increase in receiver noise due to the multiplexer compared with that of only the mixer can be attributed to the transmission loss of the waveguide circuit in the multiplexer. The IRRs were higher than 25 dB at the center of each observation band. This indicates that a high and stable IRR performance can be achieved by the waveguide-type multiplexer for the separation of sideband signals.
△ Less
Submitted 23 August, 2020;
originally announced August 2020.
-
Alfvén-wave driven magnetic rotator winds from low-mass stars I: rotation dependences of magnetic braking and mass-loss rate
Authors:
Munehito Shoda,
Takeru K. Suzuki,
Sean P. Matt,
Steven R. Cranmer,
Aline A. Vidotto,
Antoine Strugarek,
Victor See,
Victor Réville,
Adam J. Finley,
Allan Sacha Brun
Abstract:
Observations of stellar rotation show that low-mass stars lose angular momentum during the main sequence. We simulate the winds of Sun-like stars with a range of rotation rates, covering the fast and slow magneto-rotator regimes, including the transition between the two. We generalize an Alfvén-wave driven solar wind model that builds on previous works by including the magneto-centrifugal force ex…
▽ More
Observations of stellar rotation show that low-mass stars lose angular momentum during the main sequence. We simulate the winds of Sun-like stars with a range of rotation rates, covering the fast and slow magneto-rotator regimes, including the transition between the two. We generalize an Alfvén-wave driven solar wind model that builds on previous works by including the magneto-centrifugal force explicitly. In this model, the surface-averaged open magnetic flux is assumed to scale as $B_\ast f^{\rm open}_\ast \propto {\rm Ro}^{-1.2}$, where $f^{\rm open}_\ast$ and ${\rm Ro}$ are the surface open-flux filling factor and Rossby number, respectively. We find that, 1. the angular momentum loss rate (torque) of the wind is described as $τ_w \approx 2.59 \times 10^{30} {\rm \ erg} \ \left( Ω_\ast / Ω_\odot \right)^{2.82}$, yielding a spin-down law $Ω_\ast \propto t^{-0.55}$. 2. the mass-loss rate saturates at $\dot{M}_w \sim 3.4 \times 10^{-14} M_\odot {\rm \ yr^{-1}}$, due to the strong reflection and dissipation of Alfvén waves in the chromosphere. This indicates that the chromosphere has a strong impact in connecting the stellar surface and stellar wind. Meanwhile, the wind ram pressure scales as $P_w \propto Ω_\ast^{0.57}$, which is able to explain the lower-envelope of the observed stellar winds by Wood et al. 3. the location of the Alfvén radius is shown to scale in a way that is consistent with 1D analytic theory. Additionally, the precise scaling of the Alfvén radius matches previous works which used thermally-driven winds. Our results suggest that the Alfvén-wave driven magnetic rotator wind plays a dominant role in the stellar spin-down during the main-sequence.
△ Less
Submitted 22 May, 2020; v1 submitted 19 May, 2020;
originally announced May 2020.
-
New growth mechanism of dust grains in protoplanetary disks with magnetically driven disk winds
Authors:
Tetsuo Taki,
Koh Kuwabara,
Hiroshi Kobayashi,
Takeru K. Suzuki
Abstract:
We discovered a new growth mode of dust grains to km-sized bodies in protoplanetary disks that evolve by viscous accretion and magnetically driven disk winds (MDWs). We solved an approximate coagulation equation of dust grains with time-evolving disks that consist of both gas and solid components by a one-dimensional model. With the grain growth, all solid particles initially drift inward toward t…
▽ More
We discovered a new growth mode of dust grains to km-sized bodies in protoplanetary disks that evolve by viscous accretion and magnetically driven disk winds (MDWs). We solved an approximate coagulation equation of dust grains with time-evolving disks that consist of both gas and solid components by a one-dimensional model. With the grain growth, all solid particles initially drift inward toward the central star by the gas drag force. However, the radial profile of gas pressure, $P$, is modified by the MDW that disperses the gas in an inside-out manner. Consequently, a local concentration of solid particles is created by the converging radial flux of drifting dust grains at the location with the convex upward profile of $P$. When the dimensionless stop** time, ${\rm St}$, there exceeds unity, the solid particles spontaneously reach the growth dominated state because of the positive feedback between the suppressed radial drift and the enhanced accumulation of dust particles that drift from the outer part. Once the solid particles are in the drift limited state, the above-mentioned condition of ${\rm St} \gtrsim 1$ for the dust growth is equivalent with \begin{equation}
Σ_{\rm d}/Σ_{\rm g}\gtrsim η, \nonumber \end{equation} where $Σ_{\rm d}/Σ_{\rm g}$ is the dust-to-gas surface-density ratio and $η$ is dimensionless radial pressure-gradient force. As a consequence of the successful growth of dust grains, a ring-like structure containing planetesimal-sized bodies is formed at the inner part of the protoplanetary disks. Such a ring-shaped concentration of planetesimals is expected to play a vital role in the subsequent planet formation.
△ Less
Submitted 29 December, 2020; v1 submitted 19 April, 2020;
originally announced April 2020.
-
Magnetic-field evolution with large-scale velocity circulation in a neutron-star crust
Authors:
Yasufumi Kojima,
Kazuki Suzuki
Abstract:
We examine the effects of plastic flow that appear in a neutron-star crust when a magnetic stress exceeds the threshold. The dynamics involved are described using the Navier--Stokes equation comprising the viscous-flow term, and the velocity fields for the global circulation are determined using quasi-stationary approximation.
We simulate the magnetic-field evolution by taking into consideration…
▽ More
We examine the effects of plastic flow that appear in a neutron-star crust when a magnetic stress exceeds the threshold. The dynamics involved are described using the Navier--Stokes equation comprising the viscous-flow term, and the velocity fields for the global circulation are determined using quasi-stationary approximation.
We simulate the magnetic-field evolution by taking into consideration the Hall drift, Ohmic dissipation, and fluid motion induced by the Lorentz force. The decrease in the magnetic energy is enhanced, as the energy converts to the bulk motion energy and heat. It is found that the bulk velocity induced by the Lorentz force has a significant influence in the low-viscosity and strong-magnetic-field regimes. This effect is crucial near magnetar surfaces.
△ Less
Submitted 16 April, 2020;
originally announced April 2020.
-
DESHIMA on ASTE: On-sky Responsivity Calibration of the Integrated Superconducting Spectrometer
Authors:
Tatsuya Takekoshi,
Kenichi Karatsu,
Junya Suzuki,
Yoichi Tamura,
Tai Oshima,
Akio Taniguchi,
Shin'ichiro Asayama,
Tom J. L. C. Bakx,
Jochem J. A. Baselmans,
Sjoerd Bosma,
Juan Bueno,
Kah Wuy Chin,
Yasunori Fujii,
Kazuyuki Fujita,
Robert Huiting,
Soh Ikarashi,
Tsuyoshi Ishida,
Shun Ishii,
Ryohei Kawabe,
Teun M. Klapwijk,
Kotaro Kohno,
Akira Kouchi,
Nuria Llombart,
Jun Maekawa,
Vignesh Murugesan
, et al. (14 additional authors not shown)
Abstract:
We are develo** an ultra-wideband spectroscopic instrument, DESHIMA (DEep Spectroscopic HIgh-redshift MApper), based on the technologies of an on-chip filter-bank and Microwave Kinetic Inductance Detector (MKID) to investigate dusty star-burst galaxies in the distant universe at millimeter and submillimeter wavelength. An on-site experiment of DESHIMA was performed using the ASTE 10-m telescope.…
▽ More
We are develo** an ultra-wideband spectroscopic instrument, DESHIMA (DEep Spectroscopic HIgh-redshift MApper), based on the technologies of an on-chip filter-bank and Microwave Kinetic Inductance Detector (MKID) to investigate dusty star-burst galaxies in the distant universe at millimeter and submillimeter wavelength. An on-site experiment of DESHIMA was performed using the ASTE 10-m telescope. We established a responsivity model that converts frequency responses of the MKIDs to line-of-sight brightness temperature. We estimated two parameters of the responsivity model using a set of skydip data taken under various precipitable water vapor (PWV, 0.4-3.0 mm) conditions for each MKID. The line-of-sight brightness temperature of sky is estimated using an atmospheric transmission model and the PWVs. As a result, we obtain an average temperature calibration uncertainty of $1σ=4$%, which is smaller than other photometric biases. In addition, the average forward efficiency of 0.88 in our responsivity model is consistent with the value expected from the geometrical support structure of the telescope. We also estimate line-of-sight PWVs of each skydip observation using the frequency response of MKIDs, and confirm the consistency with PWVs reported by the Atacama Large Millimeter/submillimeter Array.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
Dispersal of protoplanetary disks by the combination of magnetically driven and photoevaporative winds
Authors:
Masanobu Kunitomo,
Takeru K. Suzuki,
Shu-ichiro Inutsuka
Abstract:
We investigate the roles of magnetically driven disk wind (MDW) and thermally driven photoevaporative wind (PEW) in the long-time evolution of protoplanetary disks. We start simulations from the early phase in which the disk mass is $0.118\,{\mathrm{M}_{\odot}}$ around a $1\,{\mathrm{M}_{\odot}}$ star and track the evolution until the disk is completely dispersed. We incorporate the mass loss by P…
▽ More
We investigate the roles of magnetically driven disk wind (MDW) and thermally driven photoevaporative wind (PEW) in the long-time evolution of protoplanetary disks. We start simulations from the early phase in which the disk mass is $0.118\,{\mathrm{M}_{\odot}}$ around a $1\,{\mathrm{M}_{\odot}}$ star and track the evolution until the disk is completely dispersed. We incorporate the mass loss by PEW and the mass loss and magnetic braking (wind torque) by MDW, in addition to the viscous accretion, viscous heating, and stellar irradiation. We find that MDW and PEW respectively have different roles: magnetically driven wind ejects materials from an inner disk in the early phase, whereas photoevaporation has a dominant role in the late phase in the outer ($\gtrsim1\,$au) disk. The disk lifetime, which depends on the combination of MDW, PEW, and viscous accretion, shows a large variation of $\sim1$-$20\,$Myr; the gas is dispersed mainly by the MDW and the PEW in the cases with a low viscosity and the lifetime is sensitive to the mass-loss rate and torque of the MDW, whereas the lifetime is insensitive to these parameters when the viscosity is high. Even in disks with very weak turbulence, the cooperation of MDW and PEW enables the disk dispersal within a few Myr.
△ Less
Submitted 14 November, 2021; v1 submitted 12 January, 2020;
originally announced January 2020.
-
First light demonstration of the integrated superconducting spectrometer
Authors:
Akira Endo,
Kenichi Karatsu,
Yoichi Tamura,
Tai Oshima,
Akio Taniguchi,
Tatsuya Takekoshi,
Shin'ichiro Asayama,
Tom J. L. C. Bakx,
Sjoerd Bosma,
Juan Bueno,
Kah Wuy Chin,
Yasunori Fujii,
Kazuyuki Fujita,
Robert Huiting,
Soh Ikarashi,
Tsuyoshi Ishida,
Shun Ishii,
Ryohei Kawabe,
Teun M. Klapwijk,
Kotaro Kohno,
Akira Kouchi,
Nuria Llombart,
Jun Maekawa,
Vignesh Murugesan,
Shunichi Nakatsubo
, et al. (14 additional authors not shown)
Abstract:
Ultra-wideband 3D imaging spectrometry in the millimeter-submillimeter (mm-submm) band is an essential tool for uncovering the dust-enshrouded portion of the cosmic history of star formation and galaxy evolution. However, it is challenging to scale up conventional coherent heterodyne receivers or free-space diffraction techniques to sufficient bandwidths ($\geq$1 octave) and numbers of spatial pix…
▽ More
Ultra-wideband 3D imaging spectrometry in the millimeter-submillimeter (mm-submm) band is an essential tool for uncovering the dust-enshrouded portion of the cosmic history of star formation and galaxy evolution. However, it is challenging to scale up conventional coherent heterodyne receivers or free-space diffraction techniques to sufficient bandwidths ($\geq$1 octave) and numbers of spatial pixels (>$10^2$). Here we present the design and first astronomical spectra of an intrinsically scalable, integrated superconducting spectrometer, which covers 332-377 GHz with a spectral resolution of $F/ΔF \sim 380$. It combines the multiplexing advantage of microwave kinetic inductance detectors (MKIDs) with planar superconducting filters for dispersing the signal in a single, small superconducting integrated circuit. We demonstrate the two key applications for an instrument of this type: as an efficient redshift machine, and as a fast multi-line spectral mapper of extended areas. The line detection sensitivity is in excellent agreement with the instrument design and laboratory performance, reaching the atmospheric foreground photon noise limit on sky. The design can be scaled to bandwidths in excess of an octave, spectral resolution up to a few thousand and frequencies up to $\sim$1.1 THz. The miniature chip footprint of a few $\mathrm{cm^2}$ allows for compact multi-pixel spectral imagers, which would enable spectroscopic direct imaging and large volume spectroscopic surveys that are several orders of magnitude faster than what is currently possible.
△ Less
Submitted 18 September, 2019; v1 submitted 24 June, 2019;
originally announced June 2019.
-
Three-dimensional simulation of the fast solar wind driven by compressible magnetohydrodynamic turbulence
Authors:
Munehito Shoda,
Takeru Ken Suzuki,
Mahboubeh Asgari-Targhi,
Takaaki Yokoyama
Abstract:
Using a three-dimensional compressible magnetohydrodynamic (MHD) simulation, we have reproduced the fast solar wind in a direct and self-consistent manner, based on the wave/turbulence driven scenario. As a natural consequence of Alfvenic perturbations at its base, highly compressional and turbulent fluctuations are generated, leading to heating and acceleration of the solar wind. The analysis of…
▽ More
Using a three-dimensional compressible magnetohydrodynamic (MHD) simulation, we have reproduced the fast solar wind in a direct and self-consistent manner, based on the wave/turbulence driven scenario. As a natural consequence of Alfvenic perturbations at its base, highly compressional and turbulent fluctuations are generated, leading to heating and acceleration of the solar wind. The analysis of power spectra and structure functions reveals that the turbulence is characterized by its imbalanced (in the sense of outward Alfvenic fluctuations) and anisotropic nature. The density fluctuation originates from the parametric decay instability of outwardly propagating Alfven waves and plays a significant role in the Alfven wave reflection that triggers turbulence. Our conclusion is that the fast solar wind is heated and accelerated by compressible MHD turbulence driven by parametric decay instability and resultant Alfven wave reflection.
△ Less
Submitted 19 July, 2019; v1 submitted 28 May, 2019;
originally announced May 2019.
-
Alfvén wave-driven wind from RGB and AGB stars
Authors:
Y. Yasuda,
T. K. Suzuki,
T. Kozasa
Abstract:
We develop a magnetohydrodynamical model of Alfvén wave-driven wind in open magnetic flux tubes piercing the stellar surface of Red Giant Branch (RGB) and Asymptotic Giant Branch (AGB) stars, and investigate the physical properties of the winds. The model simulations are carried out along the evolutionary tracks of stars with initial mass in the range of 1.5 to 3.0 $M_{\odot}$ and initial metallic…
▽ More
We develop a magnetohydrodynamical model of Alfvén wave-driven wind in open magnetic flux tubes piercing the stellar surface of Red Giant Branch (RGB) and Asymptotic Giant Branch (AGB) stars, and investigate the physical properties of the winds. The model simulations are carried out along the evolutionary tracks of stars with initial mass in the range of 1.5 to 3.0 $M_{\odot}$ and initial metallicity $Z_{\rm ini}$=0.02. The surface magnetic field strength being set to be 1G, we find that the wind during the evolution of star can be classified into the following four types; the first is the wind with the velocity higher than 80 km s$^{-1}$ in the RGB and early AGB (E-AGB) phases; the second is the wind with outflow velocity less than 10 km s$^{-1}$ seen around the tip of RGB or in the E-AGB phase; the third is the unstable wind in the E-AGB and thermally pulsing AGB (TP-AGB) phases; the fourth is the stable massive and slow wind with the mass-loss rate higher than 10$^{-7} M_{\odot}$ yr$^{-1}$ and the outflow velocity lower than 20 km s$^{-1}$ in the TP-AGB phase. The mass-loss rates in the first and second types of wind are two or three orders of magnitude lower than the values evaluated by an empirical formula. The presence of massive and slow wind of the fourth type suggests the possibility that the massive outflow observed in TP-AGB stars could be attributed to the Alfvén wave-driven wind.
△ Less
Submitted 22 May, 2019;
originally announced May 2019.
-
Magnetohydrodynamics in a Cylindrical Shearing Box
Authors:
Takeru K. Suzuki,
Tetsuo Taki,
Scott S. Suriano
Abstract:
We develop a framework for magnetohydrodynamical (MHD) simulations in a local cylindrical shearing box by extending the formulation of the Cartesian shearing box. We construct shearing-periodic conditions at the radial boundaries of a simulation box from the conservation relations of the basic MHD equations, taking into account the explicit radial dependence of physical quantities. We demonstrate…
▽ More
We develop a framework for magnetohydrodynamical (MHD) simulations in a local cylindrical shearing box by extending the formulation of the Cartesian shearing box. We construct shearing-periodic conditions at the radial boundaries of a simulation box from the conservation relations of the basic MHD equations, taking into account the explicit radial dependence of physical quantities. We demonstrate quasi-steady mass accretion, which cannot be handled by the standard Cartesian shearing box model, with an ideal MHD simulation in a vertically unstratified cylindrical shearing box up to 200 rotations. In this demonstrative run we set up (i) net vertical magnetic flux, (ii) a locally isothermal equation of state, and (iii) a sub-Keplerian equilibrium rotation, whereas the sound velocity and the initial Alfven velocity have the same radial dependence as that of the Keplerian velocity. Inward mass accretion is induced to balance with the outward angular momentum flux of the MHD turbulence triggered by the magnetorotational instability in a self-consistent manner. We discuss detailed physical properties of the saturated magnetic field, in comparison to the results of a Cartesian shearing box simulation.
△ Less
Submitted 1 July, 2019; v1 submitted 10 April, 2019;
originally announced April 2019.
-
Coronae of Zero/Low-Metal Low-Mass Stars
Authors:
Haruka Washinoue,
Takeru K. Suzuki
Abstract:
Recent theoretical studies suggest the existence of low-mass zero-metal stars in the current universe. In order to study the basic properties of the atmosphere of low-mass first stars, we performed one dimensional magnetohydrodynamical simulations for the heating of coronal loops on low-mass stars with various metallicities. While the simulated loops are heated up to >$10^6$ K by the dissipation o…
▽ More
Recent theoretical studies suggest the existence of low-mass zero-metal stars in the current universe. In order to study the basic properties of the atmosphere of low-mass first stars, we performed one dimensional magnetohydrodynamical simulations for the heating of coronal loops on low-mass stars with various metallicities. While the simulated loops are heated up to >$10^6$ K by the dissipation of Alfvenic waves originating from the convective motion irrespectively of the metallicity, the coronal properties sensitively depend on the metallicity. Lower-metal stars create hotter and denser coronae because the radiative cooling is suppressed. The zero-metal star gives more than ten times higher coronal density than the solar-metallicity counterpart, and as a result, the UV and X-ray fluxes from the loop are (1-5) times higher than those of the solar metallicity star. We also discuss the dependence of the coronal properties on the length of the simulated coronal loops
△ Less
Submitted 26 September, 2019; v1 submitted 25 March, 2019;
originally announced March 2019.
-
Giant protostellar flares: accretion-driven accumulation and reconnection-driven ejection of magnetic flux in protostars
Authors:
Shinsuke Takasao,
Kengo Tomida,
Kazunari Iwasaki,
Takeru K. Suzuki
Abstract:
Protostellar flares are rapid magnetic energy release events associated with formation of hot plasma in protostars. In the previous models of protostellar flares, the interaction between a protostellar magnetosphere with the surrounding disk plays crucial roles in building-up and releasing the magnetic energy. However, it remains unclear if protostars indeed have magnetospheres because vigorous di…
▽ More
Protostellar flares are rapid magnetic energy release events associated with formation of hot plasma in protostars. In the previous models of protostellar flares, the interaction between a protostellar magnetosphere with the surrounding disk plays crucial roles in building-up and releasing the magnetic energy. However, it remains unclear if protostars indeed have magnetospheres because vigorous disk accretion and strong disk magnetic fields in the protostellar phase may destroy the magnetosphere. Considering this possibility, we investigate the energy accumulation and release processes in the absence of a magnetosphere using a three-dimensional magnetohydrodynamic simulation. Our simulation reveals that protostellar flares are repeatedly produced even in such a case. Unlike in the magnetospheric models, the protostar accumulates magnetic energy by acquiring large-scale magnetic fields from the disk by accretion. Protostellar flares occur when a portion of the large-scale magnetic fields are removed from the protostar as a result of magnetic reconnection. Protostellar flares in the simulation are consistent with observations; the released magnetic energy (up to $\sim 3\times 10^{38}$ erg) is large enough to drive observed flares, and the flares produce hot ejecta. The expelled magnetic fields enhance accretion, and the energy build-up and release processes are repeated as a result. The magnetic flux removal via reconnection leads to redistribution of magnetic fields in the inner disk. We therefore consider that protostellar flares will play an important role in the evolution of the disk magnetic fields in the vicinity of protostars.
△ Less
Submitted 21 May, 2019; v1 submitted 5 February, 2019;
originally announced February 2019.
-
The formation of rings and gaps in wind-launching non-ideal MHD disks: three-dimensional simulations
Authors:
Scott S. Suriano,
Zhi-Yun Li,
Ruben Krasnopolsky,
Takeru K. Suzuki,
Hsien Shang
Abstract:
Previous axisymmetric investigations in two dimensions (2D) have shown that rings and gaps develop naturally in non-ideal magnetohydrodynamic (MHD) disk-wind systems, especially in the presence of ambipolar diffusion (AD). Here we extend these 2D simulations to three dimensions (3D) and find that rings and gaps are still formed in the presence of a moderately strong ambipolar diffusion. The rings…
▽ More
Previous axisymmetric investigations in two dimensions (2D) have shown that rings and gaps develop naturally in non-ideal magnetohydrodynamic (MHD) disk-wind systems, especially in the presence of ambipolar diffusion (AD). Here we extend these 2D simulations to three dimensions (3D) and find that rings and gaps are still formed in the presence of a moderately strong ambipolar diffusion. The rings and gaps form from the same basic mechanism that was identified in the 2D simulations, namely, the redistribution of the poloidal magnetic flux relative to the disk material as a result of the reconnection of a sharply pinched poloidal magnetic field lines. Thus, the less dense gaps are more strongly magnetized with a large poloidal magnetic field compared to the less magnetized (dense) rings. The rings and gaps start out rather smoothly in 3D simulations that have axisymmetric initial conditions. Non-axisymmetric variations arise spontaneously at later times, but they do not grow to such an extent as to disrupt the rings and gaps. These disk substructures persist to the end of the simulations, lasting up to 3000 orbital periods at the inner edge of the simulated disk. The longevity of the perturbed yet still coherent rings make them attractive sites for trap** large grains that would otherwise be lost to rapid radial migration due to gas drag. As the ambipolar diffusivity decreases, both the disk and the wind become increasingly turbulent, driven by the magnetorotational instability, with tightly-wound spiral arms becoming more prominent in the disk.
△ Less
Submitted 16 December, 2018; v1 submitted 4 October, 2018;
originally announced October 2018.
-
Hot Grain Dynamics by Electric Charging and Magnetic Trap** in Debris Disks
Authors:
Hiroshi Kimura,
Masanobu Kunitomo,
Takeru K. Suzuki,
Jan Robrade,
Philippe Thebault,
Ikuyuki Mitsuishi
Abstract:
The recent discovery of hot dust grains in the vicinity of main-sequence stars has become a hot issue among the scientific community of debris disks. Hot grains must have been enormously accumulated near their sublimation zones, but it is a mystery how such a high concentration of hot grains is sustained. The most difficult conundrum is that the size of hot dust grains is estimated to lie in the s…
▽ More
The recent discovery of hot dust grains in the vicinity of main-sequence stars has become a hot issue among the scientific community of debris disks. Hot grains must have been enormously accumulated near their sublimation zones, but it is a mystery how such a high concentration of hot grains is sustained. The most difficult conundrum is that the size of hot dust grains is estimated to lie in the submicrometer range, while submicrometer-sized grains are instantly swept away from near-stellar environments by stellar radiation pressure. One and only mechanism proposed for prolonging the residence time of hot grains in the near-stellar environments is trap** of charged nanoparticles by stellar magnetic fields. We revisit the model of magnetic grain trap** around main-sequence stars of various spectral classes by taking into account sublimation and electric charging of the grains. The model of magnetic grain trap** predicts that hot dust grains are present in the vicinity of main-sequence stars with high rotation velocities and intermediate magnetic-field strengths. On the contrary, we find that the detection of hot dust grains has no correlation with the rotation velocities of central stars nor the magnetic field strengths of the stars. Our numerical evaluation of electric grain charging indicates that the surface potential of submicrometer-sized grains in the vicinity of main-sequence stars is typically 4-5 V, which is one order of magnitude smaller than the value assumed by the model of magnetic grain trap**. On the basis of our numerical simulation on sublimation of dust grains in the vicinity of a star, it turns out that their lives end due to sublimation in a timescale much shorter than the period of one revolution at the gyroradius. It is, therefore, infeasible to dynamically extend the dwell time of hot grains inside the sublimation zone by magnetic trap**, ...
△ Less
Submitted 9 August, 2018;
originally announced August 2018.
-
Metal Pollution of Low-Mass Population III Stars through Accretion of Interstellar Objects like `Oumuamua
Authors:
Ataru Tanikawa,
Takeru K. Suzuki,
Yasuo Doi
Abstract:
We calculate accretion mass of interstellar objects (ISOs) like `Oumuamua onto low-mass population III stars (Pop.~III survivors), and estimate surface pollution of Pop.~III survivors. An ISO number density estimated from the discovery of `Oumuamua is so high ($\sim 0.2$~au$^{-3}$) that Pop.~III survivors have chances at colliding with ISOs $\gtrsim 10^5$ times per $1$~Gyr. `Oumuamua itself would…
▽ More
We calculate accretion mass of interstellar objects (ISOs) like `Oumuamua onto low-mass population III stars (Pop.~III survivors), and estimate surface pollution of Pop.~III survivors. An ISO number density estimated from the discovery of `Oumuamua is so high ($\sim 0.2$~au$^{-3}$) that Pop.~III survivors have chances at colliding with ISOs $\gtrsim 10^5$ times per $1$~Gyr. `Oumuamua itself would be sublimated near Pop.~III survivors, since it has small size, $\sim 100$~m. However, ISOs with size $\gtrsim 3$~km would reach the Pop.~III survivor surfaces. Supposing an ISO cumulative number density with size larger than $D$ is $n \propto D^{-α}$, Pop.~III survivors can accrete ISO mass $\gtrsim 10^{-16}M_\odot$, or ISO iron mass $\gtrsim 10^{-17}M_\odot$, if $α< 4$. This iron mass is larger than the accretion mass of interstellar medium (ISM) by several orders of magnitude. Taking into account material mixing in a convection zone of Pop.~III survivors, we obtain their surface pollution is typically [Fe/H] $\lesssim -8$ in most cases, however the surface pollution of Pop.~III survivors with $0.8M_\odot$ can be [Fe/H] $\gtrsim -6$ because of the very shallow convective layer. If we apply to Pop.III survivors located at the Galactocentric distance of 8 kpc, the dependence of the metal pollustion is as follows. If $α> 4$, Pop.~III survivors have no chance at colliding with ISOs with $D \gtrsim 3$~km, and keep metal-free. If $3 < α< 4$, Pop.~III survivors would be most polluted by ISOs up to [Fe/H] $\sim -7$. If $α< 3$ up to $D \sim 10$~km, Pop.~III survivors could hide in metal-poor stars so far discovered. Pop.~III survivors would be more polluted with decreasing the Galactocentric distance. Although the metal pollution depends on $α$ and the Galactocentric distance, we first show the importance of ISOs for the metal pollution of Pop.~III survivors.
△ Less
Submitted 28 May, 2018; v1 submitted 22 April, 2018;
originally announced April 2018.
-
Formation of the terrestrial planets in the solar system around 1 au via radial concentration of planetesimals
Authors:
Masahiro Ogihara,
Eiichiro Kokubo,
Takeru K. Suzuki,
Alessandro Morbidelli
Abstract:
No planets exist inside the orbit of Mercury and the terrestrial planets of the solar system exhibit a localized configuration. According to thermal structure calculation of protoplanetary disks, a silicate condensation line (~ 1300 K) is located around 0.1 au from the Sun except for the early phase of disk evolution, and planetesimals could have formed inside the orbit of Mercury. A recent study…
▽ More
No planets exist inside the orbit of Mercury and the terrestrial planets of the solar system exhibit a localized configuration. According to thermal structure calculation of protoplanetary disks, a silicate condensation line (~ 1300 K) is located around 0.1 au from the Sun except for the early phase of disk evolution, and planetesimals could have formed inside the orbit of Mercury. A recent study of disk evolution that includes magnetically driven disk winds showed that the gas disk obtains a positive surface density slope inside ~ 1 au from the central star. In a region with positive midplane pressure gradient, planetesimals undergo outward radial drift. We investigate the radial drift of planetesimals and type I migration of planetary embryos in a disk that viscously evolves with magnetically driven disk winds. We show a case in which no planets remain in the close-in region. Radial drifts of planetesimals are simulated using a recent disk evolution model that includes effects of disk winds. The late stage of planet formation is also examined by performing N-body simulations of planetary embryos. We demonstrate that in the middle stage of disk evolution, planetesimals can undergo convergent radial drift in a magnetorotational instability (MRI)-inactive disk, in which the pressure maximum is created, and accumulate in a narrow ring-like region with an inner edge at ~ 0.7 au from the Sun. We also show that planetary embryos that may grow from the narrow planetesimal ring do not exhibit significant type I migration in the late stage of disk evolution. The origin of the localized configuration of the terrestrial planets of the solar system, in particular the deficit of close-in planets, can be explained by the convergent radial drift of planetesimals in disks with a positive pressure gradient in the close-in region.
△ Less
Submitted 6 April, 2018;
originally announced April 2018.
-
Formation of close-in super-Earths in evolving protoplanetary disks due to disk winds
Authors:
Masahiro Ogihara,
Eiichiro Kokubo,
Takeru K. Suzuki,
Alessandro Morbidelli
Abstract:
Planets with masses larger than about 0.1 Earth-masses undergo rapid inward migration (type I migration) in a standard protoplanetary disk. Recent magnetohydrodynamical simulations revealed the presence of magnetically driven disk winds, which would alter the disk profile and the type I migration in the close-in region. We investigate orbital evolution of planetary embryos in disks that viscously…
▽ More
Planets with masses larger than about 0.1 Earth-masses undergo rapid inward migration (type I migration) in a standard protoplanetary disk. Recent magnetohydrodynamical simulations revealed the presence of magnetically driven disk winds, which would alter the disk profile and the type I migration in the close-in region. We investigate orbital evolution of planetary embryos in disks that viscously evolve under the effects of disk winds. The aim is to discuss effects of altered disk profiles on type I migration. In addition, we aim to examine whether observed distributions of close-in super-Earths can be reproduced by simulations that include effects of disk winds. We perform N-body simulations of super-Earth formation from planetary embryos, in which a recent model for disk evolution is used. We explore a wide range of parameters and draw general trends. We also carry out N-body simulations of close-in super-Earth formation from embryos in such disks under various conditions. We find that the type I migration is significantly suppressed in many cases. Even in cases in which inward migration occurs, the migration timescale is lengthened to 1 Myr, which mitigates the type I migration problem. This is because the gas surface density is decreased and has a flatter profile in the close-in region due to disk winds. We find that when the type I migration is significantly suppressed, planets undergo late orbital instability during the gas depletion, leading to a non-resonant configuration. We also find that observed distributions of close-in super-Earths (e.g., period ratio, mass ratio) can be reproduced. In addition, we show that in some results of simulations, systems with a chain of resonant planets, like the TRAPPIST-1 system, form.
△ Less
Submitted 3 April, 2018;
originally announced April 2018.
-
Frequency-dependent Alfvén-wave propagation in the solar wind: Onset and suppression of parametric decay instability
Authors:
Munehito Shoda,
Takaaki Yokoyama,
Takeru K. Suzuki
Abstract:
Using numerical simulations, we investigate the onset and suppression of parametric decay instability (PDI) in the solar wind, focusing on the suppression effect by the wind acceleration and expansion. We also discuss the role of PDI in generating the density fluctuation in the solar wind and the cross-helicity evolution up to $1 {\rm \ au}$. Numerical simulations from the coronal base to 1 au are…
▽ More
Using numerical simulations, we investigate the onset and suppression of parametric decay instability (PDI) in the solar wind, focusing on the suppression effect by the wind acceleration and expansion. We also discuss the role of PDI in generating the density fluctuation in the solar wind and the cross-helicity evolution up to $1 {\rm \ au}$. Numerical simulations from the coronal base to 1 au are conducted in a self-consistent manner; we take into account the feedback of wave energy and pressure in the background. Monochromatic waves with various injection frequencies $f_0$ are injected to discuss the suppression of PDI, while broadband waves are applied to compare the numerical results with observation. We find, via the simulations with monochromatic waves, that high-frequency ($f_0 \gtrsim10^{-3} {\rm \ Hz}$) Alfvén waves are subject to PDI. Meanwhile, the maximum growth rate of the PDI of low-frequency ($f_0 \lesssim10^{-4} {\rm \ Hz}$) Alfvén waves becomes negative due to acceleration and expansion effects. Medium-frequency ($f_0 \approx 10^{-3.5} {\rm \ Hz}$) Alfvén waves have a positive growth rate but do not show the signature of PDI up to 1 au because the growth rate is too small. The medium-frequency waves experience neither PDI nor reflection so they propagate through the solar wind most efficiently. This is called the frequency-filtering mechanism of the solar wind. The simulations with broadband waves indicate that the observed trend of the density fluctuation is well explained by the evolution of PDI while the observed cross-helicity evolution is in agreement with low-frequency wave propagation.
△ Less
Submitted 1 May, 2018; v1 submitted 7 March, 2018;
originally announced March 2018.
-
A Three-dimensional Simulation of a Magnetized Accretion Disk: Fast Funnel Accretion onto a Weakly Magnetized Star
Authors:
Shinsuke Takasao,
Kengo Tomida,
Kazunari Iwasaki,
Takeru K. Suzuki
Abstract:
We present the results of a global, three-dimensional magnetohydrodynamics simulation of an accretion disk with a rotating, weakly magnetized central star. The disk is threaded by a weak, large-scale poloidal magnetic field, and the central star has no strong stellar magnetosphere initially. Our simulation investigates the structure of the accretion flows from a turbulent accretion disk onto the s…
▽ More
We present the results of a global, three-dimensional magnetohydrodynamics simulation of an accretion disk with a rotating, weakly magnetized central star. The disk is threaded by a weak, large-scale poloidal magnetic field, and the central star has no strong stellar magnetosphere initially. Our simulation investigates the structure of the accretion flows from a turbulent accretion disk onto the star. The simulation reveals that fast accretion onto the star at high latitudes occurs even without a stellar magnetosphere. We find that the failed disk wind becomes the fast, high-latitude accretion as a result of angular momentum exchange mediated by magnetic fields well above the disk, where the Lorentz force that decelerates the rotational motion of gas can be comparable to the centrifugal force. Unlike the classical magnetospheric accretion scenario, fast accretion streams are not guided by magnetic fields of the stellar magnetosphere. Nevertheless, the accretion velocity reaches the free-fall velocity at the stellar surface due to the efficient angular momentum loss at a distant place from the star. This study provides a possible explanation why Herbig Ae/Be stars whose magnetic fields are generally not strong enough to form magnetospheres also show indications of fast accretion. A magnetically driven jet is not formed from the disk in our model. The differential rotation cannot generate sufficiently strong magnetic fields for the jet acceleration because the Parker instability interrupts the field amplification.
△ Less
Submitted 6 February, 2019; v1 submitted 22 January, 2018;
originally announced January 2018.
-
A self-consistent model of the coronal heating and solar wind acceleration including compressible and incompressible heating processes
Authors:
Munehito Shoda,
Takaaki Yokoyama,
Takeru K. Suzuki
Abstract:
We propose a novel one-dimensional model that includes both shock and turbulence heating and qualify how these processes contribute to heating the corona and driving the solar wind. Compressible MHD simulations allow us to automatically consider shock formation and dissipation, while turbulent dissipation is modeled via a one-point closure based on Alfvén wave turbulence. Numerical simulations wer…
▽ More
We propose a novel one-dimensional model that includes both shock and turbulence heating and qualify how these processes contribute to heating the corona and driving the solar wind. Compressible MHD simulations allow us to automatically consider shock formation and dissipation, while turbulent dissipation is modeled via a one-point closure based on Alfvén wave turbulence. Numerical simulations were conducted with different photospheric perpendicular correlation lengths $λ_0$, which is a critical parameter of Alfvén wave turbulence, and different root-mean-square photospheric transverse-wave amplitudes $δv_0$. For the various $λ_0$, we obtain a low-temperature chromosphere, high-temperature corona, and supersonic solar wind. Our analysis shows that turbulence heating is always dominant when $λ_0 \lesssim 1{\rm \ Mm}$. This result does not mean that we can ignore the compressibility because the analysis indicates that the compressible waves and their associated density fluctuations enhance the Alfvén wave reflection and therefore the turbulence heating. The density fluctuation and the cross helicity are strongly affected by $λ_0$, while the coronal temperature and mass loss rate depend weakly on $λ_0$.
△ Less
Submitted 14 February, 2018; v1 submitted 20 December, 2017;
originally announced December 2017.
-
Magnetic Activity in the Galactic Centre Region -- Fast Downflows along Rising Magnetic Loops
Authors:
Kensuke Kakiuchi,
Takeru K. Suzuki,
Yasuo Fukui,
Kazufumi Torii,
Rei Enokiya,
Mami Machida,
Ryoji Matsumoto
Abstract:
We studied roles of the magnetic field on the gas dynamics in the Galactic bulge by a three-dimensional global magnetohydrodynamical simulation data, particularly focusing on vertical flows that are ubiquitously excited by magnetic activity. In local regions where the magnetic filed is stronger, it is frequently seen that fast down-flows slide along inclined magnetic field lines that are associate…
▽ More
We studied roles of the magnetic field on the gas dynamics in the Galactic bulge by a three-dimensional global magnetohydrodynamical simulation data, particularly focusing on vertical flows that are ubiquitously excited by magnetic activity. In local regions where the magnetic filed is stronger, it is frequently seen that fast down-flows slide along inclined magnetic field lines that are associated with buoyantly rising magnetic loops. The vertical velocity of these down-flows reaches ~ 100 km s$^{-1}$ near the foot-point of the loops by the gravitational acceleration toward the Galactic plane. The two footpoints of rising magnetic loops are generally located at different radial locations and the field lines are deformed by the differential rotation. The angular momentum is transported along the field lines, and the radial force balance breaks down. As a result, a fast downflow is often observed only at the one footpoint located at the inner radial position. The fast downflow compresses the gas to form a dense region near the footpoint, which will be important in star formation afterward. Furthermore, the horizontal components of the velocity are also fast near the foot-point because the down-flow is accelerated along the magnetic sliding slope. As a result, the high-velocity flow creates various characteristic features in a simulated position-velocity diagram, depending on the viewing angle.
△ Less
Submitted 6 March, 2018; v1 submitted 12 December, 2017;
originally announced December 2017.
-
Stellar Winds and Coronae of Low-mass Pop. II/III Stars
Authors:
Takeru K. Suzuki
Abstract:
We investigated stellar winds from zero/low-metallicity low-mass stars by magnetohydrodynamical simulations for stellar winds driven by \Alfven waves from stars with mass $M_{\star}=(0.6-0.8)M_{\odot}$ and metallicity $Z=(0-1)Z_{\odot}$, where $M_{\odot}$ and $Z_{\odot}$ are the solar mass and metallicity, respectively. \Alfvenic waves, which are excited by the surface convection, travel upward fr…
▽ More
We investigated stellar winds from zero/low-metallicity low-mass stars by magnetohydrodynamical simulations for stellar winds driven by \Alfven waves from stars with mass $M_{\star}=(0.6-0.8)M_{\odot}$ and metallicity $Z=(0-1)Z_{\odot}$, where $M_{\odot}$ and $Z_{\odot}$ are the solar mass and metallicity, respectively. \Alfvenic waves, which are excited by the surface convection, travel upward from the photosphere and heat up the corona by their dissipation. For lower $Z$, denser gas can be heated up to the coronal temperature because of the inefficient radiation cooling. The coronal density of Pop.II/III stars with $Z\le 0.01Z_{\odot}$ is 1-2 orders of magnitude larger than that of the solar-metallicity star with the same mass, and as a result, the mass loss rate, $\dot{M}$, is $(4.5-20)$ times larger. This indicates that metal accretion on low-mass Pop.III stars is negligible. The soft X-ray flux of the Pop.II/III stars is also expected to be $\approx (1-30)$ times larger than that of the solar-metallicity counterpart owing to the larger coronal density, even though the radiation cooling efficiency is smaller. A larger fraction of the input \Alfvenic wave energy is transmitted to the corona in low $Z$ stars because they avoid severe reflection owing to the smaller density difference between the photosphere and the corona. Therefore, a larger fraction is converted to the thermal energy of the corona and the kinetic energy of the stellar wind. From this energetics argument, we finally derived a scaling of $\dot{M}$ as $\dot{M}\propto L R_{\star}^{11/9}M_{\star}^{-10/9}T_{\rm eff}^{11/2}\left[\max (Z/Z_{\odot},0.01)\right]^{-1/5}$, where $L$, $R_{\star}$, and $T_{\rm eff}$ are stellar luminosity, radius, and effective temperature, respectively.
△ Less
Submitted 18 January, 2018; v1 submitted 12 October, 2017;
originally announced October 2017.
-
Galactic Outflows by Alfvénic Poynting Flux: Application to Fermi Bubbles
Authors:
Takeru K. Suzuki,
Alex Lazarian
Abstract:
We investigate roles of magnetic activity in the Galactic bulge region in driving large-scale outflows of size $\sim 10$ kpc. Magnetic buoyancy and breakups of channel flows formed by magnetorotational instability excite Poynting flux by the magnetic tension force. A three-dimensional global numerical simulation shows that the average luminosity of such \Alfvenic Poynting flux is…
▽ More
We investigate roles of magnetic activity in the Galactic bulge region in driving large-scale outflows of size $\sim 10$ kpc. Magnetic buoyancy and breakups of channel flows formed by magnetorotational instability excite Poynting flux by the magnetic tension force. A three-dimensional global numerical simulation shows that the average luminosity of such \Alfvenic Poynting flux is $10^{40} - 10^{41}$ erg s$^{-1}$. We examine the energy and momentum transfer from the Poynting flux to the gas by solving time-dependent hydrodynamical simulations with explicitly taking into account low-frequency \Alfvenic waves of period of 0.5 Myr in a one-dimensional vertical magnetic flux tube. The \Alfvenic waves propagate upward into the Galactic halo, and they are damped through the propagation along meandering magnetic field lines. If the turbulence is nearly trans-Alfvénic, the wave dam** is significant, which leads to the formation of an upward propagating shock wave. At the shock front, the temperature $\gtrsim 5\times 10^6$ K, the density $\approx 6\times 10^{-4}$ cm$^{-3}$, and the outflow velocity $\approx 400-500$ km s$^{-1}$ at a height $\approx 10$ kpc, which reasonably explain the basic physical properties of the thermal component of the Fermi bubbles.
△ Less
Submitted 19 January, 2018; v1 submitted 11 October, 2017;
originally announced October 2017.
-
Effects of global gas flows on type I migration
Authors:
Masahiro Ogihara,
Eiichiro Kokubo,
Takeru K. Suzuki,
Alessandro Morbidelli,
Aurélien Crida
Abstract:
Magnetically-driven disk winds would alter the surface density slope of gas in the inner region of a protoplanetary disk $(r \lesssim 1 {\rm au})$. This in turn affects planet formation. Recently, the effect of disk wind torque has been considered with the suggestion that it would carve out the surface density of the disk from inside and would induce global gas flows (wind-driven accretion). We ai…
▽ More
Magnetically-driven disk winds would alter the surface density slope of gas in the inner region of a protoplanetary disk $(r \lesssim 1 {\rm au})$. This in turn affects planet formation. Recently, the effect of disk wind torque has been considered with the suggestion that it would carve out the surface density of the disk from inside and would induce global gas flows (wind-driven accretion). We aim to investigate effects of global gas flows on type I migration and also examine planet formation. A simplified approach was taken to address this issue, and N-body simulations with isolation-mass planets were also performed. In previous studies, the effect of gas flow induced by turbulence-driven accretion has been taken into account for its desaturation effect of the corotation torque. If more rapid gas flows (e.g., wind-driven accretion) are considered, the desaturation effect can be modified. In MRI-inactive disks, in which the wind-driven accretion dominates the disk evolution, the gas flow at the midplane plays an important role. If this flow is fast, the corotation torque is efficiently desaturated. Then, the fact that the surface density slope can be positive in the inner region due to the wind torque can generate an outward migration region extended to super-Earth mass planets. In this case, we observe that no planets fall onto the central star in N-body simulations with migration forces imposed to reproduce such migration pattern. We also see that super-Earth mass planets can undergo outward migration. Relatively rapid gas flows affects type I migration and thus the formation of close-in planets.
△ Less
Submitted 3 October, 2017;
originally announced October 2017.
-
A Theoretical Model of X-ray Jets from Young Stellar Objects
Authors:
Shinsuke Takasao,
Takeru K. Suzuki,
Kazunari Shibata
Abstract:
There is a subclass of the X-ray jets from young stellar objects which are heated very close to the footpoint of the jets, particularly DG Tau jets. Previous models attribute the strong heating to shocks in the jets. However, the mechanism that localizes the heating at the footpoint remains puzzling. We presented a different model of such X-ray jets, in which the disk atmosphere is magnetically he…
▽ More
There is a subclass of the X-ray jets from young stellar objects which are heated very close to the footpoint of the jets, particularly DG Tau jets. Previous models attribute the strong heating to shocks in the jets. However, the mechanism that localizes the heating at the footpoint remains puzzling. We presented a different model of such X-ray jets, in which the disk atmosphere is magnetically heated. Our disk corona model is based on the so-called nanoflare model for the solar corona. We show that the magnetic heating near the disks can result in the formation of a hot corona with a temperature of > 10^6 K even if the average field strength in the disk is moderately weak, > 1 G. We determine the density and the temperature at the jet base by considering the energy balance between the heating and cooling. We derive the scaling relations of the mass loss rate and terminal velocity of jets. Our model is applied to the DG Tau jets. The observed temperature and estimated mass loss rate are consistent with the prediction of our model in the case of the disk magnetic field strength of ~20 G and the heating region of < 0.1 au. The derived scaling relation of the temperature of X-ray jets could be a useful tool to estimate the magnetic field strength. We also found that the jet X-ray can have a significant impact on the ionization degree near the disk surface and the dead-zone size.
△ Less
Submitted 17 August, 2017;
originally announced August 2017.
-
Vertical flows and structures excited by magnetic activity in the Galactic center region
Authors:
Kensuke Kakiuchi,
Takeru K. Suzuki,
Yasuo Fukui,
Kazufumi Torii,
Mami Machida,
Ryoji Matsumoto
Abstract:
The vertical flow structure in the galactic center region remains poorly understood. We analyzed the MHD simulation data by Suzuki et al. (2015) for better understanding. As a result, we found the fast downflows with a speed of ~100 km/s near the foot-points of magnetic loops. These downflows are flowing along a magnetic field line and accelerated by the gravity. The direction of the fast flows is…
▽ More
The vertical flow structure in the galactic center region remains poorly understood. We analyzed the MHD simulation data by Suzuki et al. (2015) for better understanding. As a result, we found the fast downflows with a speed of ~100 km/s near the foot-points of magnetic loops. These downflows are flowing along a magnetic field line and accelerated by the gravity. The direction of the fast flows is changed by the magnetic loop geometry, as it moves. As a result, not only vertical motions but also azimuthal and radial motions are excited. This feature could be relevant to the observed high velocity dispersion in the position-velocity diagram.
△ Less
Submitted 31 October, 2016; v1 submitted 13 October, 2016;
originally announced October 2016.