-
Research on FAST Active Reflector Adjustment Algorithm Based on Computer Simulation
Authors:
Tongyue Shi,
Siyu Tao,
Haining Wang
Abstract:
Based on the background of the 2021 Higher Education Club Cup National College Students Mathematical Contest in Modeling A, according to the relevant data of the China Sky Eye (FAST) radio telescope, the main cable nodes and actuators are adjusted and controlled by mathematical modeling and computer simulation methods to realize the active reflector. The adjustment of the shape enables it to bette…
▽ More
Based on the background of the 2021 Higher Education Club Cup National College Students Mathematical Contest in Modeling A, according to the relevant data of the China Sky Eye (FAST) radio telescope, the main cable nodes and actuators are adjusted and controlled by mathematical modeling and computer simulation methods to realize the active reflector. The adjustment of the shape enables it to better receive the signal of the external celestial body and improve the utilization rate of the reflector, so as to achieve a higher receiving ratio of the feed cabin. In this paper, a point set map** algorithm based on the rotation matrix of the spatial coordinate axis is proposed, that is, the map** matrix is obtained by mathematical derivation, and the linear interpolation algorithm based on the original spherical surface and the ideal paraboloid to solve the working paraboloid is obtained. When the interpolation ratio is adjusted to 89% to satisfy the optimal solution under realistic constraints. Then, a three-dimensional spatial signal reflection model based on spatial linear invariance is proposed. Each reflective panel is used as an evaluation index. For each reflective surface, the 0-1 variable of signal accessibility on the feeder is defined. The signal is mapped to the plane where the feeder is located, which reduces a lot of computational difficulty. Finally, it is found that the panel of the feed cabin that can receive the reflected signal accounts for 19.3%. Compared with the original spherical reflection model, the working paraboloid model established in this paper has a The signal ratio has increased by 224%.
△ Less
Submitted 11 April, 2022;
originally announced April 2022.
-
Analyses of Laser Propagation Noises for TianQin Gravitational Wave Observatory Based on the Global Magnetosphere MHD Simulations
Authors:
Wei Su,
Yan Wang,
Chen Zhou,
Lingfeng Lu,
Ze-Bing Zhou,
T. Li,
Tong Shi,
Xin-Chun Hu,
Ming-Yue Zhou,
Ming Wang,
Hsien-Chi Yeh,
Han Wang,
P. F. Chen
Abstract:
TianQin is a proposed space-borne gravitational wave (GW) observatory composed of three identical satellites orbiting around the geocenter with a radius of $10^5$ km. It aims at detecting GWs in the frequency range of 0.1 mHz -- 1 Hz. The detection of GW relies on the high precision measurement of optical path length at $10^{-12}$~m level. The dispersion of space plasma can lead to the optical pat…
▽ More
TianQin is a proposed space-borne gravitational wave (GW) observatory composed of three identical satellites orbiting around the geocenter with a radius of $10^5$ km. It aims at detecting GWs in the frequency range of 0.1 mHz -- 1 Hz. The detection of GW relies on the high precision measurement of optical path length at $10^{-12}$~m level. The dispersion of space plasma can lead to the optical path difference (OPD, $Δl$) along the propagation of laser beams between any pair of satellites. Here, we study the OPD noises for TianQin. The Space Weather Modeling Framework is used to simulate the interaction between the Earth magnetosphere and solar wind. From the simulations, we extract the magnetic field and plasma parameters on the orbits of TianQin at four relative positions of the satellite constellation in the Earth magnetosphere. We calculate the OPD noise for single link, Michelson combination, and Time-Delay Interferometry (TDI) combinations ($α$ and $X$). For single link and Michelson interferometer, the maxima of $|Δl|$ are on the order of 1 pm. For the TDI combinations, these can be suppressed to about 0.004 and 0.008 pm for $α$ and $X$. The OPD noise of the Michelson combination is colored in the concerned frequency range; while the ones for the TDI combinations are approximately white. Furthermore, we calculate the ratio of the equivalent strain of the OPD noise to that of TQ, and find that the OPD noises for the TDI combinations can be neglected in the most sensitive frequency range of TQ.
△ Less
Submitted 28 April, 2021; v1 submitted 21 February, 2021;
originally announced February 2021.
-
Analyses of residual accelerations for TianQin based on the global MHD simulation
Authors:
Wei Su,
Yan Wang,
Ze-Bing Zhou,
Yan-Zheng Bai,
Yang Guo,
Chen Zhou,
Tom Lee,
Ming Wang,
Ming-Yue Zhou,
Tong Shi,
Hang Yin,
Bu-Tian Zhang
Abstract:
TianQin is a proposed space-based gravitational wave observatory. It is designed to detect the gravitational wave signals in the frequency range of 0.1 mHz -- 1 Hz. At a geocentric distance of $10^5$ km, the plasma in the earth magnetosphere will contribute as the main source of environmental noises. Here, we analyze the acceleration noises that are caused by the magnetic field of space plasma for…
▽ More
TianQin is a proposed space-based gravitational wave observatory. It is designed to detect the gravitational wave signals in the frequency range of 0.1 mHz -- 1 Hz. At a geocentric distance of $10^5$ km, the plasma in the earth magnetosphere will contribute as the main source of environmental noises. Here, we analyze the acceleration noises that are caused by the magnetic field of space plasma for the test mass of TianQin. The real solar wind data observed by the Advanced Composition Explorer are taken as the input of the magnetohydrodynamic simulation. The Space Weather Modeling Framework is used to simulate the global magnetosphere of the earth, from which we obtain the plasma and magnetic field parameters on the detector's orbits. We calculate the time series of the residual accelerations and the corresponding amplitude spectral densities on these orbit configurations. We find that the residual acceleration produced by the interaction between the TM's magnetic moment induced by the space magnetic field and the spacecraft magnetic field ($\bm{a}_{\rm M1}$) is the dominant term, which can approach $10^{-15}$ m/s$^2$/Hz$^{1/2}$ at $f \approx$ 0.2 mHz for the nominal values of the magnetic susceptibility ($χ_{\rm m} = 10^{-5}$) and the magnetic shielding factor ($ξ_{\rm m} = 10$) of the test mass. The ratios between the amplitude spectral density of the acceleration noise caused by the space magnetic field and the preliminary goal of the inertial sensor are 0.38 and 0.08 at 1 mHz and 10 mHz, respectively. We discuss the further reduction of this acceleration noise by decreasing $χ_{\rm m}$ and/or increasing $ξ_{\rm m}$ in the future instrumentation development for TianQin.
△ Less
Submitted 30 June, 2020; v1 submitted 1 April, 2020;
originally announced April 2020.
-
The Formation and Early Evolution of a Coronal Mass Ejection and its Associated Shock Wave on 2014 January 8
Authors:
Linfeng Wan,
Xin Cheng,
Tong Shi,
Wei Su,
M. D. Ding
Abstract:
In this paper, we study the formation and early evolution of a limb coronal mass ejection (CME) and its associated shock wave that occurred on 2014 January 8. The extreme ultraviolet (EUV) images provided by the Atmospheric Imaging Assembly (AIA) on board \textit{Solar Dynamics Observatory} disclose that the CME first appears as a bubble-like structure. Subsequently, its expansion forms the CME an…
▽ More
In this paper, we study the formation and early evolution of a limb coronal mass ejection (CME) and its associated shock wave that occurred on 2014 January 8. The extreme ultraviolet (EUV) images provided by the Atmospheric Imaging Assembly (AIA) on board \textit{Solar Dynamics Observatory} disclose that the CME first appears as a bubble-like structure. Subsequently, its expansion forms the CME and causes a quasi-circular EUV wave. Interestingly, both the CME and the wave front are clearly visible at all of the AIA EUV passbands. Through a detailed kinematical analysis, it is found that the expansion of the CME undergoes two phases: a first phase with a strong but transient lateral over-expansion followed by a second phase with a self-similar expansion. The temporal evolution of the expansion velocity coincides very well with the variation of the 25--50 keV hard X-ray flux of the associated flare, which indicates that magnetic reconnection most likely plays an important role in driving the expansion. Moreover, we find that, when the velocity of the CME reaches $\sim$600 km s$^{-1}$, the EUV wave starts to evolve into a shock wave, which is evidenced by the appearance of a type II radio burst. The shock's formation height is estimated to be $\sim$0.2$R_{sun}$, which is much lower than the height derived previously. Finally, we also study the thermal properties of the CME and the EUV wave. We find that the plasma in the CME leading front and the wave front has a temperature of $\sim$2 MK, while that in the CME core region and the flare region has a much higher temperature of $\ge$8 MK.
△ Less
Submitted 3 May, 2016;
originally announced May 2016.
-
Predicting the Arrival Time of Coronal Mass Ejections with the Graduated Cylindrical Shell and Drag Force Model
Authors:
Tong Shi,
Yikang Wang,
Linfeng Wan,
Xin Cheng,
Mingde Ding,
Jie Zhang
Abstract:
Accurately predicting the arrival of coronal mass ejections (CMEs) at the Earth based on remote images is of critical significance in the study of space weather. In this paper, we make a statistical study of 21 Earth directed CMEs, exploring in particular the relationship between CME initial speeds and transit times. The initial speed of a CME is obtained by fitting the CME with the Graduated Cyli…
▽ More
Accurately predicting the arrival of coronal mass ejections (CMEs) at the Earth based on remote images is of critical significance in the study of space weather. In this paper, we make a statistical study of 21 Earth directed CMEs, exploring in particular the relationship between CME initial speeds and transit times. The initial speed of a CME is obtained by fitting the CME with the Graduated Cylindrical Shell model and is thus free of projection effects. We then use the drag force model to fit results of the transit time versus the initial speed. By adopting different drag regimes, i.e., the viscous, aerodynamics, and hybrid regimes, we get similar results, with the least mean estimation error of the hybrid model of 12.9 hours. CMEs with a propagation angle (the angle between the propagation direction and the Sun-Earth line) larger than its half angular width arrive at the Earth with an angular deviation caused by factors other than the radial solar wind drag. The drag force model cannot be well applied to such events. If we exclude these events in the sample, the prediction accuracy can be improved, i.e., the estimation error reduces to 6.8 hours. This work suggests that it is viable to predict the arrival time of CMEs at the Earth based on the initial parameters with a fairly good accuracy. Thus, it provides a method of space weather forecast of 1--5 days following the occurrence of CMEs.
△ Less
Submitted 5 May, 2015;
originally announced May 2015.
