Showing 1–33 of 33 results for author: Schmoll, J

The Blue Multi Unit Spectroscopic Explorer (BlueMUSE) on the VLT: characterization of two VPHG prototypes based on dichromated gelatin and photopolymer recording materials

Authors: Alexandre Jeanneau, Andrea Bianco, Andrew Clawson, Michele Frangiamore, Elroy Pearson, Laurent Pinard, Jürgen Schmoll, Johan Richard, Rémi Giroud, Florence Laurent, Roland Bacon

Abstract: Volume-phase holographic gratings (VPHGs) are widely used in astronomical spectrographs due to their adaptability and high diffraction efficiency. Most VPHGs in operation use dichromated gelatin as a recording material, whose performance is sensitive to the coating and development process, especially in the near-UV. In this letter, we present the characterization of two UV-blue VPHG prototypes for… ▽ More Volume-phase holographic gratings (VPHGs) are widely used in astronomical spectrographs due to their adaptability and high diffraction efficiency. Most VPHGs in operation use dichromated gelatin as a recording material, whose performance is sensitive to the coating and development process, especially in the near-UV. In this letter, we present the characterization of two UV-blue VPHG prototypes for the BlueMUSE integral field spectrograph on the VLT, based on dichromated gelatin and the Bayfol$\circledR$HX photopolymer film as recording materials. Our measurements show that both prototypes meet the required diffraction efficiency and exhibit similar performance with a wavelength-average exceeding 70% in the 350-580 nm range. Deviations from theoretical models increase towards 350 nm, consistently with previous studies on similar gratings. We also report similar performances in terms spatial uniformity and grating-to-grating consistency. Likewise, no significant differences in wavefront error or scattered light are observed between the prototypes. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Comments: 7 pages, 5 figures, 1 table. Presented at SPIE "Astronomical Telescopes and Instrumentation", June 2024, in Yokohama, as part of "Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation VI"

Data downloaded via parachute from a NASA super-pressure balloon

Authors: Ellen L. Sirks, Richard Massey, Ajay S. Gill, Jason Anderson, Steven J. Benton, Anthony M. Brown, Paul Clark, Joshua English, Spencer W. Everett, Aurelien A. Fraisse, Hugo Franco, John W. Hartley, David Harvey, Bradley Holder, Andrew Hunter, Eric M. Huff, Andrew Hynous, Mathilde Jauzac, William C. Jones, Nikky Joyce, Duncan Kennedy, David Lagattuta, Jason S. -Y. Leung, Lun Li, Stephen Lishman , et al. (18 additional authors not shown)

Abstract: In April to May 2023, the superBIT telescope was lifted to the Earth's stratosphere by a helium-filled super-pressure balloon, to acquire astronomical imaging from above (99.5% of) the Earth's atmosphere. It was launched from New Zealand then, for 40 days, circumnavigated the globe five times at a latitude 40 to 50 degrees South. Attached to the telescope were four 'DRS' (Data Recovery System) cap… ▽ More In April to May 2023, the superBIT telescope was lifted to the Earth's stratosphere by a helium-filled super-pressure balloon, to acquire astronomical imaging from above (99.5% of) the Earth's atmosphere. It was launched from New Zealand then, for 40 days, circumnavigated the globe five times at a latitude 40 to 50 degrees South. Attached to the telescope were four 'DRS' (Data Recovery System) capsules containing 5 TB solid state data storage, plus a GNSS receiver, Iridium transmitter, and parachute. Data from the telescope were copied to these, and two were dropped over Argentina. They drifted 61 km horizontally while they descended 32 km, but we predicted their descent vectors within 2.4 km: in this location, the discrepancy appears irreducible below 2 km because of high speed, gusty winds and local topography. The capsules then reported their own locations to within a few metres. We recovered the capsules and successfully retrieved all of superBIT's data - despite the telescope itself being later destroyed on landing. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Comments: 12 pages

Journal ref: Aerospace 2023, 10, 960

Lensing in the Blue II: Estimating the Sensitivity of Stratospheric Balloons to Weak Gravitational Lensing

Authors: Jacqueline E. McCleary, Spencer W. Everett, Mohamed M. Shaaban, Ajay S. Gill, Georgios N. Vassilakis, Eric M. Huff, Richard J. Massey, Steven J. Benton, Anthony M. Brown, Paul Clark, Bradley Holder, Aurelien A. Fraisse, Mathilde Jauzac, William C. Jones, David Lagattuta, Jason S. -Y. Leung, Lun Li, Thuy Vy T. Luu, Johanna M. Nagy, C. Barth Netterfield, Emaad Paracha, Susan F. Redmond, Jason D. Rhodes, J\''urgen Schmoll, Ellen Sirks , et al. (1 additional authors not shown)

Abstract: The Superpressure Balloon-borne Imaging Telescope (SuperBIT) is a diffraction-limited, wide-field, 0.5 m, near-infrared to near-ultraviolet observatory designed to exploit the stratosphere's space-like conditions. SuperBIT's 2023 science flight will deliver deep, blue imaging of galaxy clusters for gravitational lensing analysis. In preparation, we have developed a weak lensing measurement pipelin… ▽ More The Superpressure Balloon-borne Imaging Telescope (SuperBIT) is a diffraction-limited, wide-field, 0.5 m, near-infrared to near-ultraviolet observatory designed to exploit the stratosphere's space-like conditions. SuperBIT's 2023 science flight will deliver deep, blue imaging of galaxy clusters for gravitational lensing analysis. In preparation, we have developed a weak lensing measurement pipeline with modern algorithms for PSF characterization, shape measurement, and shear calibration. We validate our pipeline and forecast SuperBIT survey properties with simulated galaxy cluster observations in SuperBIT's near-UV and blue bandpasses. We predict imaging depth, galaxy number (source) density, and redshift distribution for observations in SuperBIT's three bluest filters; the effect of lensing sample selections is also considered. We find that in three hours of on-sky integration, SuperBIT can attain a depth of b = 26 mag and a total source density exceeding 40 galaxies per square arcminute. Even with the application of lensing-analysis catalog selections, we find b-band source densities between 25 and 30 galaxies per square arcminute with a median redshift of z = 1.1. Our analysis confirms SuperBIT's capability for weak gravitational lensing measurements in the blue. △ Less

Submitted 6 July, 2023; originally announced July 2023.

Comments: Submitted to Astronomical Journal

Weak lensing in the blue: a counter-intuitive strategy for stratospheric observations

Authors: Mohamed M. Shaaban, Ajay S. Gill, Jacqueline McCleary, Richard J. Massey, Steven J. Benton, Anthony M. Brown, Christopher J. Damaren, Tim Eifler, Aurelien A. Fraisse, Spencer Everett, Mathew N. Galloway, Michael Henderson, Bradley Holder, Eric M. Huff, Mathilde Jauzac, William C. Jones, David Lagattuta, Jason Leung, Lun Li, Thuy Vy T. Luu Johanna M. Nagy, C. Barth Netterfield, Susan F. Redmond, Jason D. Rhodes, Andrew Robertson, Jurgen Schmoll , et al. (2 additional authors not shown)

Abstract: The statistical power of weak lensing measurements is principally driven by the number of high redshift galaxies whose shapes are resolved. Conventional wisdom and physical intuition suggest this is optimised by deep imaging at long (red or near IR) wavelengths, to avoid losing redshifted Balmer break and Lyman break galaxies. We use the synthetic Emission Line EL-COSMOS catalogue to simulate lens… ▽ More The statistical power of weak lensing measurements is principally driven by the number of high redshift galaxies whose shapes are resolved. Conventional wisdom and physical intuition suggest this is optimised by deep imaging at long (red or near IR) wavelengths, to avoid losing redshifted Balmer break and Lyman break galaxies. We use the synthetic Emission Line EL-COSMOS catalogue to simulate lensing observations using different filters, from various altitudes. Here were predict the number of exposures to achieve a target z > 0.3 source density, using off-the-shelf and custom filters. Ground-based observations are easily better at red wavelengths, as (more narrowly) are space-based observations. However, we find that SuperBIT, a diffraction-limited observatory operating in the stratosphere, should instead perform its lensing-quality observations at blue wavelengths. △ Less

Submitted 17 October, 2022; originally announced October 2022.

Overview of the Instrumentation for the Dark Energy Spectroscopic Instrument

Authors: B. Abareshi, J. Aguilar, S. Ahlen, Shadab Alam, David M. Alexander, R. Alfarsy, L. Allen, C. Allende Prieto, O. Alves, J. Ameel, E. Armengaud, J. Asorey, Alejandro Aviles, S. Bailey, A. Balaguera-Antolínez, O. Ballester, C. Baltay, A. Bault, S. F. Beltran, B. Benavides, S. BenZvi, A. Berti, R. Besuner, Florian Beutler, D. Bianchi , et al. (242 additional authors not shown)

Abstract: The Dark Energy Spectroscopic Instrument (DESI) has embarked on an ambitious five-year survey to explore the nature of dark energy with spectroscopy of 40 million galaxies and quasars. DESI will determine precise redshifts and employ the Baryon Acoustic Oscillation method to measure distances from the nearby universe to z > 3.5, as well as measure the growth of structure and probe potential modifi… ▽ More The Dark Energy Spectroscopic Instrument (DESI) has embarked on an ambitious five-year survey to explore the nature of dark energy with spectroscopy of 40 million galaxies and quasars. DESI will determine precise redshifts and employ the Baryon Acoustic Oscillation method to measure distances from the nearby universe to z > 3.5, as well as measure the growth of structure and probe potential modifications to general relativity. In this paper we describe the significant instrumentation we developed for the DESI survey. The new instrumentation includes a wide-field, 3.2-deg diameter prime-focus corrector that focuses the light onto 5020 robotic fiber positioners on the 0.812 m diameter, aspheric focal surface. The positioners and their fibers are divided among ten wedge-shaped petals. Each petal is connected to one of ten spectrographs via a contiguous, high-efficiency, nearly 50 m fiber cable bundle. The ten spectrographs each use a pair of dichroics to split the light into three channels that together record the light from 360 - 980 nm with a resolution of 2000 to 5000. We describe the science requirements, technical requirements on the instrumentation, and management of the project. DESI was installed at the 4-m Mayall telescope at Kitt Peak, and we also describe the facility upgrades to prepare for DESI and the installation and functional verification process. DESI has achieved all of its performance goals, and the DESI survey began in May 2021. Some performance highlights include RMS positioner accuracy better than 0.1", SNR per \sqrtÅ > 0.5 for a z > 2 quasar with flux 0.28e-17 erg/s/cm^2/A at 380 nm in 4000s, and median SNR = 7 of the [OII] doublet at 8e-17 erg/s/cm^2 in a 1000s exposure for emission line galaxies at z = 1.4 - 1.6. We conclude with highlights from the on-sky validation and commissioning of the instrument, key successes, and lessons learned. (abridged) △ Less

Submitted 22 May, 2022; originally announced May 2022.

Comments: 78 pages, 32 figures, submitted to AJ

Performance of the Dark Energy Spectroscopic Instrument(DESI) Fiber System

Authors: Claire Poppett, Patrick Jelinsky, Julien Guy, Jerry Edelstein, Sharon Jelinsky, Jessica Aguilar, Ray Sharples, Jurgen Schmoll, David Bramall, Luke Tyas, Paul Martini, Kevin Fanning, Michael Levi, David Brooks, Peter Doel, Duan Yutong, Gregory Tarle, Erique Gaztanaga, Francisco Prada, the DESI Collaboration

Abstract: The recently commissioned Dark Energy Spectroscopic Instrument (DESI) will measure the expansion historyof the universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasarsover 14000 sq deg will be measured during the life of the experiment. A new prime focus corrector for theKPNO Mayall telescope delivers light to 5000 fiber optic positioners. The fibers… ▽ More The recently commissioned Dark Energy Spectroscopic Instrument (DESI) will measure the expansion historyof the universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasarsover 14000 sq deg will be measured during the life of the experiment. A new prime focus corrector for theKPNO Mayall telescope delivers light to 5000 fiber optic positioners. The fibers in turn feed ten broad-bandspectrographs. We describe key aspects and lessons learned from the development, delivery and installation ofthe fiber system at the Mayall telescope. △ Less

Submitted 27 January, 2021; originally announced January 2021.

Comments: 9 pages

Journal ref: SPIE 2020

Optical night sky brightness measurements from the stratosphere

Authors: Ajay Gill, Steven J. Benton, Anthony M. Brown, Paul Clark, Christopher J. Damaren, Tim Eifler, Aurelien A. Fraisse, Mathew N. Galloway, John W. Hartley, Bradley Holder, Eric M. Huff, Mathilde Jauzac, William C. Jones, David Lagattuta, Jason S. -Y Leung, Lun Li, Thuy Vy T. Luu, Richard J. Massey, Jacqueline McCleary, James Mullaney, Johanna M. Nagy, C. Barth Netterfield, Susan Redmond, Jason D. Rhodes, L. Javier Romualdez , et al. (5 additional authors not shown)

Abstract: This paper presents optical night sky brightness measurements from the stratosphere using CCD images taken with the Super-pressure Balloon-borne Imaging Telescope (SuperBIT). The data used for estimating the backgrounds were obtained during three commissioning flights in 2016, 2018, and 2019 at altitudes ranging from 28 km to 34 km above sea level. For a valid comparison of the brightness measurem… ▽ More This paper presents optical night sky brightness measurements from the stratosphere using CCD images taken with the Super-pressure Balloon-borne Imaging Telescope (SuperBIT). The data used for estimating the backgrounds were obtained during three commissioning flights in 2016, 2018, and 2019 at altitudes ranging from 28 km to 34 km above sea level. For a valid comparison of the brightness measurements from the stratosphere with measurements from mountain-top ground-based observatories (taken at zenith on the darkest moonless night at high Galactic and high ecliptic latitudes), the stratospheric brightness levels were zodiacal light and diffuse Galactic light subtracted, and the airglow brightness was projected to zenith. The stratospheric brightness was measured around 5.5 hours, 3 hours, and 2 hours before the local sunrise time in 2016, 2018, and 2019 respectively. The $B$, $V$, $R$, and $I$ brightness levels in 2016 were 2.7, 1.0, 1.1, and 0.6 mag arcsec$^{-2}$ darker than the darkest ground-based measurements. The $B$, $V$, and $R$ brightness levels in 2018 were 1.3, 1.0, and 1.3 mag arcsec$^{-2}$ darker than the darkest ground-based measurements. The $U$ and $I$ brightness levels in 2019 were 0.1 mag arcsec$^{-2}$ brighter than the darkest ground-based measurements, whereas the $B$ and $V$ brightness levels were 0.8 and 0.6 mag arcsec$^{-2}$ darker than the darkest ground-based measurements. The lower sky brightness levels, stable photometry, and lower atmospheric absorption make stratospheric observations from a balloon-borne platform a unique tool for astronomy. We plan to continue this work in a future mid-latitude long duration balloon flight with SuperBIT. △ Less

Submitted 10 October, 2020; originally announced October 2020.

Comments: 17 pages, 7 figures. Accepted for publication in the Astronomical Journal

Journal ref: The Astronomical Journal, Volume 160, Number 6, 2020

Download by Parachute: Retrieval of Assets from High Altitude Balloons

Authors: E. L. Sirks, P. Clark, R. J. Massey, S. J. Benton, A. M. Brown, C. J. Damaren, T. Eifler, A. A. Fraisse, C. Frenk, M. Funk, M. N. Galloway, A. Gill, J. W. Hartley, B. Holder, E. M. Huff, M. Jauzac, W. C. Jones, D. Lagattuta, J. S. -Y. Leung, L. Li, T. V. T. Luu, J. McCleary, J. M. Nagy, C. B. Netterfield, S. Redmond , et al. (5 additional authors not shown)

Abstract: We present a publicly-available toolkit of flight-proven hardware and software to retrieve 5 TB of data or small physical samples from a stratospheric balloon platform. Before launch, a capsule is attached to the balloon, and rises with it. Upon remote command, the capsule is released and descends via parachute, continuously transmitting its location. Software to predict the trajectory can be used… ▽ More We present a publicly-available toolkit of flight-proven hardware and software to retrieve 5 TB of data or small physical samples from a stratospheric balloon platform. Before launch, a capsule is attached to the balloon, and rises with it. Upon remote command, the capsule is released and descends via parachute, continuously transmitting its location. Software to predict the trajectory can be used to select a safe but accessible landing site. We dropped two such capsules from the SuperBIT telescope, in September 2019. The capsules took ~37 minutes to descend from ~30 km altitude. They drifted 32 km and 19 km horizontally, but landed within 300 m and 600 m of their predicted landing sites. We found them easily, and successfully recovered the data. We welcome interest from other balloon teams for whom the technology would be useful. △ Less

Submitted 22 April, 2020; originally announced April 2020.

Robust diffraction-limited NIR-to-NUV wide-field imaging from stratospheric balloon-borne platforms -- SuperBIT science telescope commissioning flight & performance

Authors: L. Javier Romualdez, Steven J. Benton, Anthony M. Brown, Paul Clark, Christopher J. Damaren, Tim Eifler, Aurelien A. Fraisse, Mathew N. Galloway, Ajay Gill, John W. Hartley, Bradley Holder, Eric M. Huff, Mathilde Jauzac, William C. Jones, David Lagattuta, Jason S. -Y. Leung, Lun Li, Thuy Vy T. Luu, Richard J. Massey, Jacqueline McCleary, James Mullaney, Johanna M. Nagy, C. Barth Netterfield, Susan Redmond, Jason D. Rhodes , et al. (4 additional authors not shown)

Abstract: At a fraction the total cost of an equivalent orbital mission, scientific balloon-borne platforms, operating above 99.7% of the Earth's atmosphere, offer attractive, competitive, and effective observational capabilities -- namely space-like resolution, transmission, and backgrounds -- that are well suited for modern astronomy and cosmology. SuperBIT is a diffraction-limited, wide-field, 0.5 m tele… ▽ More At a fraction the total cost of an equivalent orbital mission, scientific balloon-borne platforms, operating above 99.7% of the Earth's atmosphere, offer attractive, competitive, and effective observational capabilities -- namely space-like resolution, transmission, and backgrounds -- that are well suited for modern astronomy and cosmology. SuperBIT is a diffraction-limited, wide-field, 0.5 m telescope capable of exploiting these observing conditions in order to provide exquisite imaging throughout the near-IR to near-UV. It utilizes a robust active stabilization system that has consistently demonstrated a 1 sigma sky-fixed pointing stability at 48 milliarcseconds over multiple 1 hour observations at float. This is achieved by actively tracking compound pendulations via a three-axis gimballed platform, which provides sky-fixed telescope stability at < 500 milliarcseconds and corrects for field rotation, while employing high-bandwidth tip/tilt optics to remove residual disturbances across the science imaging focal plane. SuperBIT's performance during the 2019 commissioning flight benefited from a customized high-fidelity science-capable telescope designed with exceptional thermo- and opto-mechanical stability as well as tightly constrained static and dynamic coupling between high-rate sensors and telescope optics. At the currently demonstrated level of flight performance, SuperBIT capabilities now surpass the science requirements for a wide variety of experiments in cosmology, astrophysics and stellar dynamics. △ Less

Submitted 25 November, 2019; originally announced November 2019.

Comments: The following article has been submitted to Review of Scientific Instruments (RSI)

Design and production of the DESI fibre cables

Authors: Jürgen Schmoll, Robert Besuner, David Bramall, David Brooks, Jerry Edelstein, Patrick Jelinsky, Michael Levi, Graham Murray, Claire Poppett, Ray Sharples, Luke Tyas, David Schlegel

Abstract: The Dark Energy Spectroscopic Instrument (DESI) is under construction to measure the expansion history of the Universe using the Baryonic Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 sq deg will be measured during the life of the experiment. A new prime focus corrector for the KPNO Mayall telescope will deliver light to 5000 fibre optic positioners. The… ▽ More The Dark Energy Spectroscopic Instrument (DESI) is under construction to measure the expansion history of the Universe using the Baryonic Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 sq deg will be measured during the life of the experiment. A new prime focus corrector for the KPNO Mayall telescope will deliver light to 5000 fibre optic positioners. The fibres in turn feed 10 broad-band spectrographs. We will describe the design and production progress on the fibre cables, strain relief system and preparation of the slit end. In contrast to former projects, the larger scale of production required for DESI requires teaming up with industry to find a solution to reduce the time scale of production as well as to minimise the stress on the optical fibres. △ Less

Submitted 8 November, 2018; originally announced November 2018.

Comments: SPIE conference proceedings article of "Astronomical Telescopes and Instrumentation 2018" conference, Austin, Texas, USA

Journal ref: Proc. SPIE 10702, Ground-based and Airborne Instrumentation for Astronomy VII, 107027N (9 July 2018); doi: 10.1117/12.2312140; https://doi.org/10.1117/12.2312140

Auto-tuned thermal control on stratospheric balloon experiments

Authors: S. Redmond, S. J. Benton, A. M. Brown, P. Clark, C. J. Damaren, T. Eifler, A. A. Fraisse, M. N. Galloway, J. W. Hartley, M. Jauzac, W. C. Jones, L. Li, T. V. T. Luu, R. J. Massey, J. Mccleary, C. B. Netterfield, I. L. Padilla, J. D. Rhodes, L. J. Romualdez, J. Schmoll, S. Tam

Abstract: Balloon-borne telescopes present unique thermal design challenges which are a combination of those present for both space and ground telescopes. At altitudes of 35-40 km, convection effects are minimal and difficult to characterize. Radiation and conduction are the predominant heat transfer mechanisms reducing the thermal design options. For long duration flights payload mass is a function of powe… ▽ More Balloon-borne telescopes present unique thermal design challenges which are a combination of those present for both space and ground telescopes. At altitudes of 35-40 km, convection effects are minimal and difficult to characterize. Radiation and conduction are the predominant heat transfer mechanisms reducing the thermal design options. For long duration flights payload mass is a function of power consumption making it an important optimization parameter. SuperBIT, or the Super-pressure Balloon-borne Imaging Telescope, aims to study weak lensing using a 0.5m modified Dall-Kirkham telescope capable of achieving 0.02" stability and capturing deep exposures from visible to near UV wavelengths. To achieve the theoretical stratospheric diffraction-limited resolution of 0.25", mirror deformation gradients must be kept to within 20nm. The thermal environment must thus be stable on time scales of an hour and the thermal gradients must be minimized on the telescope. SuperBIT plans to implement two types of parameter solvers; one to validate the thermal design and the other to tightly control the thermal environment. △ Less

Submitted 25 July, 2018; originally announced July 2018.

Comments: 10 pages, 8 figures, submitted to and presented at the SPIE Astronomical Telescopes and Instrumentation 2018 conference (Austin, TX). Figure 6 and Figure 8 updated since SPIE submission due to access to better data and author list updated

Journal ref: Proc. SPIE 10700, Ground-based and Airborne Telescopes VII, 107005R (6 July 2018)

Overview, design, and flight results from SuperBIT: a high-resolution, wide-field, visible-to-near-UV balloon-borne astronomical telescope

Authors: L. Javier Romualdez, Steven J. Benton, Anthony M. Brown, Paul Clark, Christopher J. Damaren, Tim Eifler, Aurelien A. Fraisse, Mathew N. Galloway, John W. Hartley, Mathilde Jauzac, William C. Jones, Lun Li, Thuy Vy T. Luu, Richard J. Massey, Jacqueline Mccleary, C. Barth Netterfield, Susan Redmond, Jason D. Rhodes, Jürgen Schmoll, Sut-Ieng Tam

Abstract: Balloon-borne astronomy is a unique tool that allows for a level of image stability and significantly reduced atmospheric interference without the often prohibitive cost and long development time-scale that are characteristic of space-borne facility-class instruments. The Super-pressure Balloon-borne Imaging Telescope (SuperBIT) is a wide-field imager designed to provide 0.02" image stability over… ▽ More Balloon-borne astronomy is a unique tool that allows for a level of image stability and significantly reduced atmospheric interference without the often prohibitive cost and long development time-scale that are characteristic of space-borne facility-class instruments. The Super-pressure Balloon-borne Imaging Telescope (SuperBIT) is a wide-field imager designed to provide 0.02" image stability over a 0.5 degree field-of-view for deep exposures within the visible-to-near-UV (300-900 um). As such, SuperBIT is a suitable platform for a wide range of balloon-borne observations, including solar and extrasolar planetary spectroscopy as well as resolved stellar populations and distant galaxies. We report on the overall payload design and instrumentation methodologies for SuperBIT as well as telescope and image stability results from two test flights. Prospects for the SuperBIT project are outlined with an emphasis on the development of a fully operational, three-month science flight from New Zealand in 2020. △ Less

Submitted 8 July, 2018; originally announced July 2018.

Comments: 15 pages, 7 figures, submitted to and presented at the SPIE Astronomical Telescopes and Instrumentation 2018 conference (Austin, TX). arXiv admin note: text overlap with arXiv:1608.02502

Cherenkov Telescope Array Contributions to the 35th International Cosmic Ray Conference (ICRC2017)

Authors: F. Acero, B. S. Acharya, V. Acín Portella, C. Adams, I. Agudo, F. Aharonian, I. Al Samarai, A. Alberdi, M. Alcubierre, R. Alfaro, J. Alfaro, C. Alispach, R. Aloisio, R. Alves Batista, J. -P. Amans, E. Amato, L. Ambrogi, G. Ambrosi, M. Ambrosio, J. Anderson, M. Anduze, E. O. Angüner, E. Antolini, L. A. Antonelli, V. Antonuccio , et al. (1117 additional authors not shown)

Abstract: List of contributions from the Cherenkov Telescope Array Consortium presented at the 35th International Cosmic Ray Conference, July 12-20 2017, Busan, Korea. List of contributions from the Cherenkov Telescope Array Consortium presented at the 35th International Cosmic Ray Conference, July 12-20 2017, Busan, Korea. △ Less

Submitted 24 October, 2017; v1 submitted 11 September, 2017; originally announced September 2017.

Comments: Index of Cherenkov Telescope Array conference proceedings at the ICRC2017, Busan, Korea

Contributions of the Cherenkov Telescope Array (CTA) to the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016)

Authors: The CTA Consortium, :, A. Abchiche, U. Abeysekara, Ó. Abril, F. Acero, B. S. Acharya, C. Adams, G. Agnetta, F. Aharonian, A. Akhperjanian, A. Albert, M. Alcubierre, J. Alfaro, R. Alfaro, A. J. Allafort, R. Aloisio, J. -P. Amans, E. Amato, L. Ambrogi, G. Ambrosi, M. Ambrosio, J. Anderson, M. Anduze, E. O. Angüner , et al. (1387 additional authors not shown)

Abstract: List of contributions from the Cherenkov Telescope Array (CTA) Consortium presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016), July 11-15, 2016, in Heidelberg, Germany. List of contributions from the Cherenkov Telescope Array (CTA) Consortium presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016), July 11-15, 2016, in Heidelberg, Germany. △ Less

Submitted 17 October, 2016; originally announced October 2016.

Comments: Index of CTA conference proceedings for the Gamma 2016, Heidelberg, Germany

Inauguration and First Light of the GCT-M Prototype for the Cherenkov Telescope Array

Authors: J. J. Watson, A. De Franco, A. Abchiche, D. Allan, J. -P. Amans, T. P. Armstrong, A. Balzer, D. Berge, C. Boisson, J. -J. Bousquet, A. M. Brown, M. Bryan, G. Buchholtz, P. M. Chadwick, H. Costantini, G. Cotter, M. K. Daniel, F. De Frondat, J. -L. Dournaux, D. Dumas, J. -P. Ernenwein, G. Fasola, S. Funk, J. Gironnet, J. A. Graham , et al. (44 additional authors not shown)

Abstract: The Gamma-ray Cherenkov Telescope (GCT) is a candidate for the Small Size Telescopes (SSTs) of the Cherenkov Telescope Array (CTA). Its purpose is to extend the sensitivity of CTA to gamma-ray energies reaching 300 TeV. Its dual-mirror optical design and curved focal plane enables the use of a compact camera of 0.4 m diameter, while achieving a field of view of above 8 degrees. Through the use of… ▽ More The Gamma-ray Cherenkov Telescope (GCT) is a candidate for the Small Size Telescopes (SSTs) of the Cherenkov Telescope Array (CTA). Its purpose is to extend the sensitivity of CTA to gamma-ray energies reaching 300 TeV. Its dual-mirror optical design and curved focal plane enables the use of a compact camera of 0.4 m diameter, while achieving a field of view of above 8 degrees. Through the use of the digitising TARGET ASICs, the Cherenkov flash is sampled once per nanosecond continuously and then digitised when triggering conditions are met within the analogue outputs of the photosensors. Entire waveforms (typically covering 96 ns) for all 2048 pixels are then stored for analysis, allowing for a broad spectrum of investigations to be performed on the data. Two prototypes of the GCT camera are under development, with differing photosensors: Multi-Anode Photomultipliers (MAPMs) and Silicon Photomultipliers (SiPMs). During November 2015, the GCT MAPM (GCT-M) prototype camera was integrated onto the GCT structure at the Observatoire de Paris-Meudon, where it observed the first Cherenkov light detected by a prototype instrument for CTA. △ Less

Submitted 5 October, 2016; originally announced October 2016.

Comments: Conference proceedings for High Energy Gamma-Ray Astronomy (Gamma2016)

The Gamma-ray Cherenkov Telescope for the Cherenkov Telescope Array

Authors: L. Tibaldo, A. Abchiche, D. Allan, J. -P. Amans, T. P. Armstrong, A. Balzer, D. Berge, C. Boisson, J. -J. Bousquet, A. M. Brown, M. Bryan, G. Buchholtz, P. M. Chadwick, H. Costantini, G. Cotter, M. K. Daniel, A. De Franco, F. De Frondat, J. -L. Dournaux, D. Dumas, J. -P. Ernenwein, G. Fasola, S. Funk, J. Gironnet, J. A. Graham , et al. (45 additional authors not shown)

Abstract: The Cherenkov Telescope Array (CTA) is a forthcoming ground-based observatory for very-high-energy gamma rays. CTA will consist of two arrays of imaging atmospheric Cherenkov telescopes in the Northern and Southern hemispheres, and will combine telescopes of different types to achieve unprecedented performance and energy coverage. The Gamma-ray Cherenkov Telescope (GCT) is one of the small-sized t… ▽ More The Cherenkov Telescope Array (CTA) is a forthcoming ground-based observatory for very-high-energy gamma rays. CTA will consist of two arrays of imaging atmospheric Cherenkov telescopes in the Northern and Southern hemispheres, and will combine telescopes of different types to achieve unprecedented performance and energy coverage. The Gamma-ray Cherenkov Telescope (GCT) is one of the small-sized telescopes proposed for CTA to explore the energy range from a few TeV to hundreds of TeV with a field of view $\gtrsim 8^\circ$ and angular resolution of a few arcminutes. The GCT design features dual-mirror Schwarzschild-Couder optics and a compact camera based on densely-pixelated photodetectors as well as custom electronics. In this contribution we provide an overview of the GCT project with focus on prototype development and testing that is currently ongoing. We present results obtained during the first on-telescope campaign in late 2015 at the Observatoire de Paris-Meudon, during which we recorded the first Cherenkov images from atmospheric showers with the GCT multi-anode photomultiplier camera prototype. We also discuss the development of a second GCT camera prototype with silicon photomultipliers as photosensors, and plans toward a contribution to the realisation of CTA. △ Less

Submitted 5 October, 2016; originally announced October 2016.

Comments: 6 paqes, 4 figures. To appear in the Proceedings of the 6th International Symposium on High-Energy Gamma-Ray Astronomy (July 11-15, 2016, Heidelberg, Germany)

Journal ref: AIP Conference Proceedings 1792, 080004 (2017)

The GCT camera for the Cherenkov Telescope Array

Authors: Anthony M. Brown, A. Abchiche, D. Allan, J. P. Amans, T. P. Armstrong, A. Balzer, D. Berge, C. Boisson, J. -J. Bousquet, M. Bryan, G. Buchholtz, P. M. Chadwick, H. Costantini, G. Cotter, M. K. Daniel, A. De Franco, F. De Frondat, J. -L. Dournaux, D. Dumas, G. Fasola, S. Funk, J. Gironnet, J. A. Graham, T. Greenshaw, O. Hervet , et al. (41 additional authors not shown)

Abstract: The Gamma-ray Cherenkov Telescope (GCT) is proposed for the Small-Sized Telescope component of the Cherenkov Telescope Array (CTA). GCT's dual-mirror Schwarzschild-Couder (SC) optical system allows the use of a compact camera with small form-factor photosensors. The GCT camera is ~0.4 m in diameter and has 2048 pixels; each pixel has a ~0.2 degree angular size, resulting in a wide field-of-view. T… ▽ More The Gamma-ray Cherenkov Telescope (GCT) is proposed for the Small-Sized Telescope component of the Cherenkov Telescope Array (CTA). GCT's dual-mirror Schwarzschild-Couder (SC) optical system allows the use of a compact camera with small form-factor photosensors. The GCT camera is ~0.4 m in diameter and has 2048 pixels; each pixel has a ~0.2 degree angular size, resulting in a wide field-of-view. The design of the GCT camera is high performance at low cost, with the camera housing 32 front-end electronics modules providing full waveform information for all of the camera's 2048 pixels. The first GCT camera prototype, CHEC-M, was commissioned during 2015, culminating in the first Cherenkov images recorded by a SC telescope and the first light of a CTA prototype. In this contribution we give a detailed description of the GCT camera and present preliminary results from CHEC-M's commissioning. △ Less

Submitted 11 August, 2016; originally announced August 2016.

Comments: 8 pages, 6 figures, published in the proceedings of SPIE Astronomical Telescopes and Instrumentation, Edinburgh 2016

The design and development of a high-resolution visible-to-near-UV telescope for balloon-borne astronomy: SuperBIT

Authors: L. Javier Romualdez, Steven J. Benton, Paul Clark, Christopher J. Damaren, Tim Eifler, Aurelien A. Fraisse, Mathew N. Galloway, John W. Hartley, William C. Jones, Lun Li, Leeav Lipton, Thuy Vy T. Luu, Richard J. Massey, C. Barth Netterfield, Ivan Padilla, Jason D. Rhodes, Jürgen Schmoll

Abstract: Balloon-borne astronomy is unique in that it allows for a level of image stability, resolution, and optical backgrounds that are comparable to space-borne systems due to greatly reduced atmospheric interference, but at a fraction of the cost and over a significantly reduced development time-scale. Instruments operating within visible-to-near-UV bands ($300$ - $900$ um) can achieve a theoretical di… ▽ More Balloon-borne astronomy is unique in that it allows for a level of image stability, resolution, and optical backgrounds that are comparable to space-borne systems due to greatly reduced atmospheric interference, but at a fraction of the cost and over a significantly reduced development time-scale. Instruments operating within visible-to-near-UV bands ($300$ - $900$ um) can achieve a theoretical diffraction limited resolution of $0.01"$ from the stratosphere ($35$ - $40$ km altitude) without the need for extensive adaptive optical systems required by ground-based systems. The {\it Superpressure Balloon-borne Imaging Telescope} ("SuperBIT") is a wide-field imager designed to achieve 0.02$"$ stability over a 0.5$^\circ$ field-of-view, for deep single exposures of up to 5 minutes. SuperBIT is thus well-suited for many astronomical observations, from solar or extrasolar planetary observations, to resolved stellar populations and distant galaxies (whether to study their morphology, evolution, or gravitational lensing by foreground mass). We report SuperBIT's design and implementation, emphasizing its two-stage real-time stabilization: telescope stability to $1$ - $2"$ at the telescope level (a goal surpassed during a test flight in September 2015) and image stability down to $0.02"$ via an actuated tip-tilt mirror in the optical path (to be tested during a flight in 2016). The project is progressing toward a fully operational, three month flight from New Zealand by 2018 △ Less

Submitted 8 August, 2016; originally announced August 2016.

Comments: 12 pages, 5 figures, 2 tables, SPIE Astronomical Telescopes and Instrumentation 2016

The first GCT camera for the Cherenkov Telescope Array

Authors: A. De Franco, R. White, D. Allan, T. Armstrong, T. Ashton, A. Balzer, D. Berge, R. Bose, A. M. Brown, J. Buckley, P. M. Chadwick, P. Cooke, G. Cotter, M. K. Daniel, S. Funk, T. Greenshaw, J. Hinton, M. Kraus, J. La**ton, P. Molyneux, P. Moore, S. Nolan, A. Okumura, D. Ross, C. Rulten , et al. (10 additional authors not shown)

Abstract: The Gamma Cherenkov Telescope (GCT) is proposed to be part of the Small Size Telescope (SST) array of the Cherenkov Telescope Array (CTA). The GCT dual-mirror optical design allows the use of a compact camera of diameter roughly 0.4 m. The curved focal plane is equipped with 2048 pixels of ~0.2° angular size, resulting in a field of view of ~9°. The GCT camera is designed to record the flashes of… ▽ More The Gamma Cherenkov Telescope (GCT) is proposed to be part of the Small Size Telescope (SST) array of the Cherenkov Telescope Array (CTA). The GCT dual-mirror optical design allows the use of a compact camera of diameter roughly 0.4 m. The curved focal plane is equipped with 2048 pixels of ~0.2° angular size, resulting in a field of view of ~9°. The GCT camera is designed to record the flashes of Cherenkov light from electromagnetic cascades, which last only a few tens of nanoseconds. Modules based on custom ASICs provide the required fast electronics, facilitating sampling and digitisation as well as first level of triggering. The first GCT camera prototype is currently being commissioned in the UK. On-telescope tests are planned later this year. Here we give a detailed description of the camera prototype and present recent progress with testing and commissioning. △ Less

Submitted 4 September, 2015; originally announced September 2015.

Comments: In Proceedings of the 34th International Cosmic Ray Conference (ICRC2015), The Hague, The Netherlands. All CTA contributions at arXiv:1508.05894

CTA Contributions to the 34th International Cosmic Ray Conference (ICRC2015)

Authors: The CTA Consortium, :, A. Abchiche, U. Abeysekara, Ó. Abril, F. Acero, B. S. Acharya, M. Actis, G. Agnetta, J. A. Aguilar, F. Aharonian, A. Akhperjanian, A. Albert, M. Alcubierre, R. Alfaro, E. Aliu, A. J. Allafort, D. Allan, I. Allekotte, R. Aloisio, J. -P. Amans, E. Amato, L. Ambrogi, G. Ambrosi, M. Ambrosio , et al. (1290 additional authors not shown)

Abstract: List of contributions from the CTA Consortium presented at the 34th International Cosmic Ray Conference, 30 July - 6 August 2015, The Hague, The Netherlands. List of contributions from the CTA Consortium presented at the 34th International Cosmic Ray Conference, 30 July - 6 August 2015, The Hague, The Netherlands. △ Less

Submitted 11 September, 2015; v1 submitted 24 August, 2015; originally announced August 2015.

Comments: Index of CTA conference proceedings at the ICRC2015, The Hague (The Netherlands). v1: placeholder with no arXiv links yet, to be replaced once individual contributions have been all submitted; v2: final with arXiv links to all CTA contributions and full author list

The dual-mirror Small Size Telescope for the Cherenkov Telescope Array

Authors: G. Pareschi, G. Agnetta, L. A. Antonelli, D. Bastieri, G. Bellassai, M. Belluso, C. Bigongiari, S. Billotta, B. Biondo, G. Bonanno, G. Bonnoli, P. Bruno, A. Bulgarelli, R. Canestrari, M. Capalbi, P. Caraveo, A. Carosi, E. Cascone, O. Catalano, M. Cereda, P. Conconi, V. Conforti, G. Cusumano, V. De Caprio, A. De Luca , et al. (89 additional authors not shown)

Abstract: In this paper, the development of the dual mirror Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA) is reviewed. Up to 70 SST, with a primary mirror diameter of 4 m, will be produced and installed at the CTA southern site. These will allow investigation of the gamma-ray sky at the highest energies accessible to CTA, in the range from about 1 TeV to 300 TeV. The telescope presente… ▽ More In this paper, the development of the dual mirror Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA) is reviewed. Up to 70 SST, with a primary mirror diameter of 4 m, will be produced and installed at the CTA southern site. These will allow investigation of the gamma-ray sky at the highest energies accessible to CTA, in the range from about 1 TeV to 300 TeV. The telescope presented in this contribution is characterized by two major innovations: the use of a dual mirror Schwarzschild-Couder configuration and of an innovative camera using as sensors either multi-anode photomultipliers (MAPM) or silicon photomultipliers (SiPM). The reduced plate-scale of the telescope, achieved with the dual-mirror optics, allows the camera to be compact (40 cm in diameter), and low-cost. The camera, which has about 2000 pixels of size 6x6 mm^2, covers a field of view of 10°. The dual mirror telescopes and their cameras are being developed by three consortia, ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana, Italy/INAF), GATE (Gamma-ray Telescope Elements, France/Paris Observ.) and CHEC (Compact High Energy Camera, universities in UK, US and Japan) which are merging their efforts in order to finalize an end-to-end design that will be constructed for CTA. A number of prototype structures and cameras are being developed in order to investigate various alternative designs. In this contribution, these designs are presented, along with the technological solutions under study. △ Less

Submitted 18 July, 2013; originally announced July 2013.

Comments: In Proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), Rio de Janeiro (Brazil). All CTA contributions at arXiv:1307.2232

SST-GATE: A dual mirror telescope for the Cherenkov Telescope Array

Authors: A. Zech, J. -P. Amans, S. Blake, C. Boisson, C. Costille, F. De-Frondat, J. -L. Dournaux, D. Dumas, G. Fasola, T. Greenshaw, O. Hervet, J. -M. Huet, P. Laporte, C. Rulten, D. Savoie, F. Sayede, J. Schmoll, H. Sol

Abstract: The Cherenkov Telescope Array (CTA) will be the world's first open observatory for very high energy gamma-rays. Around a hundred telescopes of different sizes will be used to detect the Cherenkov light that results from gamma-ray induced air showers in the atmosphere. Amongst them, a large number of Small Size Telescopes (SST), with a diameter of about 4 m, will assure an unprecedented coverage of… ▽ More The Cherenkov Telescope Array (CTA) will be the world's first open observatory for very high energy gamma-rays. Around a hundred telescopes of different sizes will be used to detect the Cherenkov light that results from gamma-ray induced air showers in the atmosphere. Amongst them, a large number of Small Size Telescopes (SST), with a diameter of about 4 m, will assure an unprecedented coverage of the high energy end of the electromagnetic spectrum (above ~1TeV to beyond 100 TeV) and will open up a new window on the non-thermal sky. Several concepts for the SST design are currently being investigated with the aim of combining a large field of view (~9 degrees) with a good resolution of the shower images, as well as minimizing costs. These include a Davies-Cotton configuration with a Geiger-mode avalanche photodiode (GAPD) based camera, as pioneered by FACT, and a novel and as yet untested design based on the Schwarzschild-Couder configuration, which uses a secondary mirror to reduce the plate-scale and to allow for a wide field of view with a light-weight camera, e.g. using GAPDs or multi-anode photomultipliers. One objective of the GATE (Gamma-ray Telescope Elements) programme is to build one of the first Schwarzschild-Couder prototypes and to evaluate its performance. The construction of the SST-GATE prototype on the campus of the Paris Observatory in Meudon is under way. We report on the current status of the project and provide details of the opto-mechanical design of the prototype, the development of its control software, and simulations of its expected performance. △ Less

Submitted 11 July, 2013; originally announced July 2013.

Comments: In Proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), Rio de Janeiro (Brazil). All CTA contributions at arXiv:1307.2232

A Compact High Energy Camera for the Cherenkov Telescope Array

Authors: M. K. Daniel, R. J. White, D. Berge, J. Buckley, P. M. Chadwick, G. Cotter, S. Funk, T. Greenshaw, N. Hidaka, J. Hinton, J. La**ton, S. Markoff, P. Moore, S. Nolan, S. Ohm, A. Okumura, D. Ross, L. Sapozhnikov, J. Schmoll, P. Sutcliffe, J. Sykes, H. Tajima, G. S. Varner, J. Vandenbroucke, J. Vink , et al. (1 additional authors not shown)

Abstract: The Compact High Energy Camera (CHEC) is a camera-development project involving UK, US, Japanese and Dutch institutes for the dual-mirror Small-Sized Telescopes (SST-2M) of the Cherenkov Telescope Array (CTA). Two CHEC prototypes, based on different photosensors are funded and will be assembled and tested in the UK over the next ~18 months. CHEC is designed to record flashes of Cherenkov light las… ▽ More The Compact High Energy Camera (CHEC) is a camera-development project involving UK, US, Japanese and Dutch institutes for the dual-mirror Small-Sized Telescopes (SST-2M) of the Cherenkov Telescope Array (CTA). Two CHEC prototypes, based on different photosensors are funded and will be assembled and tested in the UK over the next ~18 months. CHEC is designed to record flashes of Cherenkov light lasting from a few to a hundred nanoseconds, with typical RMS image width and length of ~0.2 x 1.0 degrees, and has a 9 degree field of view. The physical camera geometry is dictated by the telescope optics: a curved focal surface with radius of curvature 1m and diameter ~35cm is required. CHEC is designed to work with both the ASTRI and GATE SST-2M telescope structures and will include an internal LED flasher system for calibration. The first CHEC prototype will be based on multi-anode photomultipliers (MAPMs) and the second on silicon photomultipliers (SiPMs or MPPCs). The first prototype will soon be installed on the ASTRI SST-2M prototype structure on Mt. Etna. △ Less

Submitted 10 July, 2013; originally announced July 2013.

Comments: 4 pages. In Proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), Rio de Janeiro (Brazil). All CTA contributions at arXiv:1307.2232

CTA contributions to the 33rd International Cosmic Ray Conference (ICRC2013)

Authors: The CTA Consortium, :, O. Abril, B. S. Acharya, M. Actis, G. Agnetta, J. A. Aguilar, F. Aharonian, M. Ajello, A. Akhperjanian, M. Alcubierre, J. Aleksic, R. Alfaro, E. Aliu, A. J. Allafort, D. Allan, I. Allekotte, R. Aloisio, E. Amato, G. Ambrosi, M. Ambrosio, J. Anderson, E. O. Angüner, L. A. Antonelli, V. Antonuccio , et al. (1082 additional authors not shown)

Abstract: Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil △ Less

Submitted 29 July, 2013; v1 submitted 8 July, 2013; originally announced July 2013.

Comments: Index of CTA conference proceedings at the ICRC2013, Rio de Janeiro (Brazil). v1: placeholder with no arXiv links yet, to be replaced once individual contributions have been all submitted. v2: final with arXiv links to all CTA contributions and full author list

Design and manufacture of micro-optical arrays using 3D diamond machining techniques

Authors: Juergen Schmoll, David J. Robertson, David A. Ryder

Abstract: We describe our work towards the manufacture of micro-optical arrays using freeform diamond machining techniques. Simulations have been done to show the feasibility of manufacturing micro-lens arrays using the slow-tool servo method. Using this technique, master shapes can be produced for replication of micro-lens arrays of either epoxy-on-glass or monolthic glass types. A machine tool path prog… ▽ More We describe our work towards the manufacture of micro-optical arrays using freeform diamond machining techniques. Simulations have been done to show the feasibility of manufacturing micro-lens arrays using the slow-tool servo method. Using this technique, master shapes can be produced for replication of micro-lens arrays of either epoxy-on-glass or monolthic glass types. A machine tool path programme has been developed on the machine software platform DIFFSYS, allowing the production of spherical, aspherical and toric arrays. In addition, in theory spatially varying lenslets, sparse arrays and dithered lenslet arrays (for high contrast applications) are possible to produce. In practice, due to the diamond tool limitations not all formats are feasible. Investigations into solving this problem have been carried out and a solution is presented here. △ Less

Submitted 7 June, 2006; originally announced June 2006.

Comments: 8 pages, 11 figures. Copyright 2006 Society of Photo-Optical Engineers. This paper will be published in SPIE Conf. Series 6273 and is made available as an electronic preprint with permission of SPIE. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or commercial purposes, or modification of the content of the paper are prohibited

Optical replication techniques for image slicers

Authors: J. Schmoll, D. J. Robertson, C. M. Dubbeldam, J. Yao, F. Bortoletto, L. Pina, R. Hudec, E. Prieto, C. Norrie, S. Ramsay-Howat, W. Preuss

Abstract: The Smart Focal Planes (SmartFP) activity is a European Joint Research Activity funded to develop novel optical technologies for future large telescope instrumentation. In this paper, we will discuss the image slicer developments being carried out as part of this initiative. Image slicing technique s have many applications in the plans for instrumentation on Extremely Large Telescopes and will b… ▽ More The Smart Focal Planes (SmartFP) activity is a European Joint Research Activity funded to develop novel optical technologies for future large telescope instrumentation. In this paper, we will discuss the image slicer developments being carried out as part of this initiative. Image slicing technique s have many applications in the plans for instrumentation on Extremely Large Telescopes and will be central to the delivery of the science case. A study of a virtual "multi-object multi-ifu spectrograph and imager" (MOMSI) for a hypothetical OWL-class telescope reveals the need for focal plane splitting, deployable imagers and very small beam steering elements like deployable IFUs. The image slicer workpackage, lead from Durham University in collaboration with LFM Bremen, TNO Delft, UKATC Edinburgh, CRAL Lyon, LAM Marseille, Padua University and REFLEX Prague, is evaluating technologies for manufacturing micro optics in large numbers to enable multi-object integral field spectroscopy. △ Less

Submitted 29 September, 2005; v1 submitted 22 September, 2005; originally announced September 2005.

Comments: To be published in the proceedings of the Durham Integral Field Spectroscopy workshop 2005 July 04-08. REPLACEMENT (Sep 29): Author list updated

Journal ref: New Astron.Rev.50:263-266,2006

The Durham Micro-Optics Programme

Authors: J. Schmoll, C. M. Dubbeldam, D. J. Robertson, J. Yao

Abstract: The Durham Microoptics Programme was established to develop key components to be used for integral field spectrographs for upcoming instrumentation projects, focussing on currently existing telescopes as well as on the next generation of ELTs. These activities include monolithic multi-optics machining and grinding, optical surface improvement using various post polishing techniques and replicati… ▽ More The Durham Microoptics Programme was established to develop key components to be used for integral field spectrographs for upcoming instrumentation projects, focussing on currently existing telescopes as well as on the next generation of ELTs. These activities include monolithic multi-optics machining and grinding, optical surface improvement using various post polishing techniques and replication of micro-optical components. While these developments have mostly slicer-type IFUs in mind, also new types of microlens arrays are in development for fiber based high contrast IFU systems. △ Less

Submitted 22 September, 2005; originally announced September 2005.

Comments: Submitted to the proceedings of the Durham Integral Field Spectroscopy Workshop July 4th-8th 2005

Journal ref: New Astron.Rev.50:337-341,2006

PMAS, the Potsdam Multi-Aperture Spectrophotometer. I. Design, Manufacture, and Performance

Authors: M. M. Roth, A. Kelz, T. Fechner, T. Hahn, S. -M. Bauer, T. Becker, P. Boehm, L. Christensen, F. Dionies, J. Paschke, E. Popow, D. Wolter, J. Schmoll, U. Laux, W. Altmann

Abstract: We describe the design, manufacture, commissioning, and performance of PMAS, the Potsdam Multi-Aperture Spectrophotometer. PMAS is a dedicated integral field spectrophotometer, optimized to cover the optical wavelength regime of 0.35--1um. It is based on the lens array -- fiber bundle principle of operation. The instrument employs an all-refractive fiber spectrograph, built with CaF2 optics, to… ▽ More We describe the design, manufacture, commissioning, and performance of PMAS, the Potsdam Multi-Aperture Spectrophotometer. PMAS is a dedicated integral field spectrophotometer, optimized to cover the optical wavelength regime of 0.35--1um. It is based on the lens array -- fiber bundle principle of operation. The instrument employs an all-refractive fiber spectrograph, built with CaF2 optics, to provide good transmission and high image quality over the entire nominal wavelength range. A set of user-selectable reflective gratings provides low to medium spectral resolution in first order of approx. 1.5, 3.2, and 7 A, depending on the groove density (1200, 600, 300 gr/mm). While the standard integral field unit (IFU) uses a 16x16 element lens array, which provides seeing-limited sampling in a relatively small field-of-view (FOV) in one of three magnifications (8x8, 12x12, or 16x16 arcsec^2, respectively), a recently retrofitted bare fiber bundle IFU (PPak) expands the FOV to a hexagonal area with a footprint of 65x74 arcsec^2. Other special features include a cryogenic CCD camera for field acquisition and guiding, a nod-shuffle mode for beam switching and improved sky background subtraction, and a scanning Fabry-Perot etalon in combination with the standard IFU (PYTHEAS mode). PMAS was initially designed and built as an experimental traveling instrument with optical interfaces to various telescopes (Calar Alto 3.5m, ESO-VLT, LBT). It is offered as a common user instrument at Calar Alto under contract with MPIA Heidelberg since 2002. △ Less

Submitted 28 February, 2005; originally announced February 2005.

Comments: accepted for publication in PASP, 18 pages, 21 figures

Design and construction of the IMACS-IFU, a 2000-element integral field unit

Authors: J. Schmoll, G. N. Dodsworth, R. Content, J. R. Allington-Smith

Abstract: The IMACS-IFU is an Integral Field Unit built for the IMACS spectrograph at the Magellan-I-Telescope at Las Campanas Observatory. It consists of two rectangular fields of 5 by 7 arcseconds, separated by roughly one arcminute. With a total number of 2000 spatial elements it is the second largest fiber-lenslet based IFU worldwide, working in a wavelength range between 400 and 900 nm. Due to the eq… ▽ More The IMACS-IFU is an Integral Field Unit built for the IMACS spectrograph at the Magellan-I-Telescope at Las Campanas Observatory. It consists of two rectangular fields of 5 by 7 arcseconds, separated by roughly one arcminute. With a total number of 2000 spatial elements it is the second largest fiber-lenslet based IFU worldwide, working in a wavelength range between 400 and 900 nm. Due to the equally sized fields classical background subtraction, beam switching and shuffling are possible observation techniques. One particular design challenge was the single, half a metre long curved slit in combination with a non telecentric output. Besides the construction some preliminary results are described. △ Less

Submitted 24 August, 2004; originally announced August 2004.

Comments: 10 pages, 7 figures, 1 table. Proceedings for SPIE poster 5492-175 of SPIE Symposium "Astronomical Telescopes and Instrumentation", June 2004, Glasgow

3D Spectrophotometry of Planetary Nebulae in the Bulge of M31

Authors: M. M. Roth, T. Becker, A. Kelz, J. Schmoll

Abstract: We introduce crowded field integral field (3D) spectrophotometry as a useful technique for the study of resolved stellar populations in nearby galaxies. As a methodological test, we present a pilot study with selected extragalactic planetary nebulae (XPN) in the bulge of M31, demonstrating how 3D spectroscopy is able to improve the limited accuracy of background subtraction which one would norma… ▽ More We introduce crowded field integral field (3D) spectrophotometry as a useful technique for the study of resolved stellar populations in nearby galaxies. As a methodological test, we present a pilot study with selected extragalactic planetary nebulae (XPN) in the bulge of M31, demonstrating how 3D spectroscopy is able to improve the limited accuracy of background subtraction which one would normally obtain with classical slit spectroscopy. It is shown that due to the absence of slit effects, 3D is a most suitable technique for spectrophometry. We present spectra and line intensities for 5 XPN in M31, obtained with the MPFS instrument at the Russian 6m BTA, INTEGRAL at the WHT, and with PMAS at the Calar Alto 3.5m Telescope. Using 3D spectra of bright standard stars, we demonstrate that the PSF is sampled with high accuracy, providing a centroiding precision at the milli-arcsec level. Crowded field 3D spectrophotometry and the use of PSF fitting techniques is suggested as the method of choice for a number of similar observational problems, including luminous stars in nearby galaxies, supernovae, QSO host galaxies, gravitationally lensed QSOs, and others. △ Less

Submitted 17 November, 2003; originally announced November 2003.

Comments: (1) Astrophysikalisches Institut Potsdam, (2) University of Durham. 18 pages, 11 figures, accepted for publication in ApJ

Journal ref: Astrophys.J. 603 (2004) 531-547

Statistical Test of Optical Fibers for use in PMAS, the Potsdam Multi-Aperture Spectrophotometer

Authors: J. Schmoll, M. M. Roth, U. Laux

Abstract: Focal ratio degradation measurements of optical fibers for the PMAS integral field instrument have been performed using the Photometric Testbench of the Potsdam Astrophysical Institute (AIP). An effort has been made to obtain sufficiently large statistical samples of individual fiber measurements. The optimization of the measurement process has made it possible to study quantitatively the effect… ▽ More Focal ratio degradation measurements of optical fibers for the PMAS integral field instrument have been performed using the Photometric Testbench of the Potsdam Astrophysical Institute (AIP). An effort has been made to obtain sufficiently large statistical samples of individual fiber measurements. The optimization of the measurement process has made it possible to study quantitatively the effects of different coupling methods (air--glass vs.\ immersion) and of imperfections like defocus, lateral displacement, and angular misalignment. Furthermore, the effects of mechanical stress on focal ratio degradation have been investigated, confirming the presumed cause of modal noise which is known to limit the maximum signal-to-noise one can achieve with fiber-coupled echelle spectrographs. △ Less

Submitted 15 April, 2003; originally announced April 2003.

Comments: 14 pages, 19 figures. Accepted for publication by PASP, IP02-129, for July 2003

Photometric and Kinematic Studies of Open Star Clusters I: NGC 581 (M 103)

Authors: Joerg Sanner, Michael Geffert, Jens Brunzendorf, Juergen Schmoll

Abstract: We present CCD photometry and a proper motion study of the young open star cluster, NGC 581 (M 103). Fitting isochrones to the colour magnitude diagram, we found an age of 16 +/- 4 Myr and a distance of roughly 3 kpc for this cluster. The proper motion study identifies 77 stars of V=14.5 mag or brighter to be cluster members. We combine membership determination by proper motions and statistical… ▽ More We present CCD photometry and a proper motion study of the young open star cluster, NGC 581 (M 103). Fitting isochrones to the colour magnitude diagram, we found an age of 16 +/- 4 Myr and a distance of roughly 3 kpc for this cluster. The proper motion study identifies 77 stars of V=14.5 mag or brighter to be cluster members. We combine membership determination by proper motions and statistical field star subtraction to derive the IMF of the cluster and find a quite steep slope of Gamma=-1.80. △ Less

Submitted 6 August, 1999; originally announced August 1999.

Comments: 9 pages, 11 figures, accepted for publication in Astronomy & Astrophysics, Main Journal

BUSCA: A Telescope Instrumentation for Simultaneous Imaging in 4 Optical Bands

Authors: K. Reif, K. Bagschik, K. S. de Boer, J. Schmoll, Ph. Mueller, H Poschmann, G Klink, R Kohley, U. Heber, U. Mebold

Abstract: The "Bonn University Simultaneous CAmera" (BUSCA) is a CCD camera system which allows simultaneous direct imaging of the same sky area in four colors. The optics are designed for an f/8 beam and four 4Kx4K CCDs with 15m pixels covering a field of view of 12 arcmin x 12 arcmin at a 2m class telescope. In September 1998 BUSCA has seen "First Light". The instrument is based on three dichroic beam… ▽ More The "Bonn University Simultaneous CAmera" (BUSCA) is a CCD camera system which allows simultaneous direct imaging of the same sky area in four colors. The optics are designed for an f/8 beam and four 4Kx4K CCDs with 15m pixels covering a field of view of 12 arcmin x 12 arcmin at a 2m class telescope. In September 1998 BUSCA has seen "First Light". The instrument is based on three dichroic beam splitters which separate optical wavelength bands such (at 430nm, 540nm, 730nm) that standard astronomical intermediate-band filter systems can be used. The dichroics are made of plane-parallel glass plates mounted at an angle of 45 degrees. Astigmatism in the transmitted beams (f/8) is completely cancelled by identical plane-parallel glass plates of suitable orientation. BUSCA offers new perspectives in astronomical multicolor photometry: i) The broadband spectral properties (e.g. color indices) of astronomical objects in the optical can be determined with high reliability even in non-photometric atmospheric conditions. ii) Precious observing time is used very efficiently. iii) With the large field of view, extended objects like globular and open star clusters or galaxies are covered in a single exposure. iv) Each exposure results in a complete data set. △ Less

Submitted 11 March, 1999; originally announced March 1999.

Comments: HTML document with 9 figures (.jpg's, .gif's). To appear in SPIE, Vol. 3649, gziped Postscript document (1.1MB) with full resolution diagrams at: ftp://www.astro.uni-bonn.de/pub/reif/busca/busca.ps.gz