-
Probing Velocity Dispersion inside CMEs in Inner Corona: New Insights on CME Initiation
Authors:
Satabdwa Majumdar,
Elke D' Huys,
Marilena Mierla,
Nitin Vashishtha,
Dana-Camelia Talpeanu,
Dipankar Banerjee,
Martin A. Reiss
Abstract:
This work studies the kinematics of the leading edge and the core of 6 Coronal Mass Ejections (CMEs) in the combined field of view of Sun Watcher using Active Pixel System detector and Image Processing (SWAP) on-board PRoject for On-Board Autonomy (PROBA-2) and the ground-based K-Cor coronagraph of the Mauna Loa Solar Observatory (MLSO). We report, for the first time, on the existence of a critica…
▽ More
This work studies the kinematics of the leading edge and the core of 6 Coronal Mass Ejections (CMEs) in the combined field of view of Sun Watcher using Active Pixel System detector and Image Processing (SWAP) on-board PRoject for On-Board Autonomy (PROBA-2) and the ground-based K-Cor coronagraph of the Mauna Loa Solar Observatory (MLSO). We report, for the first time, on the existence of a critical height h$_\mathrm{c}$, which marks the onset of velocity dispersion inside the CME. This height for the studied events lies between 1.4-1.8 R$_{\odot}$, in the inner corona. We find the critical heights to be relatively higher for gradual CMEs, as compared to impulsive ones, indicating that the early initiation of these two classes might be different physically. We find several interesting imprints of the velocity dispersion on CME kinematics. The critical height is strongly correlated with the flux-rope minor radius and the mass of the CME. Also, the magnitude of velocity dispersion shows a reasonable positive correlation with the above two parameters. We believe these results will advance our understanding of CME initiation mechanisms and will help provide improved constraints to CME initiation models.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
Flux rope modeling of the 2022 Sep 5 CME observed by Parker Solar Probe and Solar Orbiter from 0.07 to 0.69 au
Authors:
Emma E. Davies,
Hannah T. Rüdisser,
Ute V. Amerstorfer,
Christian Möstl,
Maike Bauer,
Eva Weiler,
Tanja Amerstorfer,
Satabdwa Majumdar,
Phillip Hess,
Andreas J. Weiss,
Martin A. Reiss,
Lucie M. Green,
David M. Long,
Teresa Nieves-Chinchilla,
Domenico Trotta,
Timothy S. Horbury,
Helen O'Brien,
Edward Fauchon-Jones,
Jean Morris,
Christopher J. Owen,
Stuart D. Bale,
Justin C. Kasper
Abstract:
As both Parker Solar Probe (PSP) and Solar Orbiter (SolO) reach heliocentric distances closer to the Sun, they present an exciting opportunity to study the structure of CMEs in the inner heliosphere. We present an analysis of the global flux rope structure of the 2022 September 5 CME event that impacted PSP at a heliocentric distance of only 0.07 au and SolO at 0.69 au. We compare in situ measurem…
▽ More
As both Parker Solar Probe (PSP) and Solar Orbiter (SolO) reach heliocentric distances closer to the Sun, they present an exciting opportunity to study the structure of CMEs in the inner heliosphere. We present an analysis of the global flux rope structure of the 2022 September 5 CME event that impacted PSP at a heliocentric distance of only 0.07 au and SolO at 0.69 au. We compare in situ measurements at PSP and SolO to determine global and local expansion measures, finding a good agreement between magnetic field relationships with heliocentric distance, but significant differences with respect to flux rope size. We use PSP/WISPR images as input to the ELEvoHI model, providing a direct link between remote and in situ observations; we find a large discrepancy between the resulting modeled arrival times, suggesting that the underlying model assumptions may not be suitable when using data obtained close to the Sun, where the drag regime is markedly different in comparison to larger heliocentric distances. Finally, we fit the SolO/MAG and PSP/FIELDS data independently with the 3DCORE model and find that many parameters are consistent between spacecraft, however, challenges are apparent when reconstructing a global 3D structure that aligns with arrival times at PSP and Solar Orbiter, likely due to the large radial and longitudinal separations between spacecraft. From our model results, it is clear the solar wind background speed and drag regime strongly affects the modeled expansion and propagation of CMEs and needs to be taken into consideration.
△ Less
Submitted 17 May, 2024;
originally announced May 2024.
-
Which Upstream Solar Wind Conditions Matter Most in Predicting Bz within Coronal Mass Ejections
Authors:
Pete Riley,
M. A. Reiss,
C. Mostl
Abstract:
Accurately predicting the z-component of the interplanetary magnetic field, particularly during the passage of an interplanetary coronal mass ejection (ICME), is a crucial objective for space weather predictions. Currently, only a handful of techniques have been proposed and they remain limited in scope and accuracy. Recently, a robust machine learning (ML) technique was developed for predicting t…
▽ More
Accurately predicting the z-component of the interplanetary magnetic field, particularly during the passage of an interplanetary coronal mass ejection (ICME), is a crucial objective for space weather predictions. Currently, only a handful of techniques have been proposed and they remain limited in scope and accuracy. Recently, a robust machine learning (ML) technique was developed for predicting the minimum value of Bz within ICMEs based on a set of 42 'features', that is, variables calculated from measured quantities upstream of the ICME and within its sheath region. In this study, we investigate these so-called explanatory variables in more detail, focusing on those that were (1) statistically significant; and (2) most important. We find that number density and magnetic field strength accounted for a large proportion of the variability. These features capture the degree to which the ICME compresses the ambient solar wind ahead. Intuitively, this makes sense: Energy made available to CMEs as they erupt is partitioned into magnetic and kinetic energy. Thus, more powerful CMEs are launched with larger flux-rope fields (larger Bz), at greater speeds, resulting in more sheath compression (increased number density and total field strength).
△ Less
Submitted 30 March, 2023;
originally announced March 2023.
-
Automatic Detection of Interplanetary Coronal Mass Ejections in Solar Wind In Situ Data
Authors:
Hannah T. Rüdisser,
Andreas Windisch,
Ute V. Amerstorfer,
Christian Möstl,
Tanja Amerstorfer,
Rachel L. Bailey,
Martin A. Reiss
Abstract:
Interplanetary coronal mass ejections (ICMEs) are one of the main drivers for space weather disturbances. In the past, different approaches have been used to automatically detect events in existing time series resulting from solar wind in situ observations. However, accurate and fast detection still remains a challenge when facing the large amount of data from different instruments. For the automa…
▽ More
Interplanetary coronal mass ejections (ICMEs) are one of the main drivers for space weather disturbances. In the past, different approaches have been used to automatically detect events in existing time series resulting from solar wind in situ observations. However, accurate and fast detection still remains a challenge when facing the large amount of data from different instruments. For the automatic detection of ICMEs we propose a pipeline using a method that has recently proven successful in medical image segmentation. Comparing it to an existing method, we find that while achieving similar results, our model outperforms the baseline regarding training time by a factor of approximately 20, thus making it more applicable for other datasets. The method has been tested on in situ data from the Wind spacecraft between 1997 and 2015 with a True Skill Statistic (TSS) of 0.64. Out of the 640 ICMEs, 466 were detected correctly by our algorithm, producing a total of 254 False Positives. Additionally, it produced reasonable results on datasets with fewer features and smaller training sets from Wind, STEREO-A and STEREO-B with True Skill Statistics of 0.56, 0.57 and 0.53, respectively. Our pipeline manages to find the start of an ICME with a mean absolute error (MAE) of around 2 hours and 56 minutes, and the end time with a MAE of 3 hours and 20 minutes. The relatively fast training allows straightforward tuning of hyperparameters and could therefore easily be used to detect other structures and phenomena in solar wind data, such as corotating interaction regions.
△ Less
Submitted 29 October, 2022; v1 submitted 7 May, 2022;
originally announced May 2022.
-
Writhed Analytical Magnetic Flux Rope Model
Authors:
Andreas J. Weiss,
Teresa Nieves-Chinchilla,
Christian Möstl,
Martin A. Reiss,
Tanja Amerstorfer,
Rachel L. Bailey
Abstract:
Observations of magnetic clouds, within interplanetary coronal mass ejections (ICMEs), are often well described by flux rope models. Most of these assume either a cylindrical or toroidal geometry. In some cases, these models are also capable of accounting for non-axisymmetric crosssections but they generally all assume axial invariance. It can be expected that any ICME, and its flux rope, will be…
▽ More
Observations of magnetic clouds, within interplanetary coronal mass ejections (ICMEs), are often well described by flux rope models. Most of these assume either a cylindrical or toroidal geometry. In some cases, these models are also capable of accounting for non-axisymmetric crosssections but they generally all assume axial invariance. It can be expected that any ICME, and its flux rope, will be deformed along its axis due to influences such as the solar wind. In this work, we aim to develop a writhed analytical magnetic flux rope model which would allow us to analytically describe a flux rope structure with varying curvature and torsion so that we are no longer constrained to a cylindrical or toroidal geometry. In this first iteration of our model we will solely focus on a circular cross-section of constant size. We describe our flux rope geometry in terms of a parametrized flux rope axis and a parallel transport frame. We derive expressions for the axial and poloidal magnetic field components under the assumption that the total axial magnetic flux is conserved. We find an entire class of possible solutions, which differ by the choice of integration constants, and present the results for a specific example. In general, we find that the twist of the magnetic field locally changes when the geometry deviates from a cylinder or torus. This new approach also allows us to generate completely new types of in situ magnetic field profiles which strongly deviate from those generated by cylindrical or toroidal models.
△ Less
Submitted 2 December, 2022; v1 submitted 21 February, 2022;
originally announced February 2022.
-
Forecasting GICs and geoelectric fields from solar wind data using LSTMs: application in Austria
Authors:
R. L. Bailey,
R. Leonhardt,
C. Möstl,
C. Beggan,
M. A. Reiss,
A. Bhaskar,
A. J. Weiss
Abstract:
The forecasting of local GIC effects has largely relied on the forecasting of dB/dt as a proxy and, to date, little attention has been paid to directly forecasting the geoelectric field or GICs themselves. We approach this problem with machine learning tools, specifically recurrent neural networks or LSTMs by taking solar wind observations as input and training the models to predict two different…
▽ More
The forecasting of local GIC effects has largely relied on the forecasting of dB/dt as a proxy and, to date, little attention has been paid to directly forecasting the geoelectric field or GICs themselves. We approach this problem with machine learning tools, specifically recurrent neural networks or LSTMs by taking solar wind observations as input and training the models to predict two different kinds of output: first, the geoelectric field components Ex and Ey; and second, the GICs in specific substations in Austria. The training is carried out on the geoelectric field and GICs modelled from 26 years of one-minute geomagnetic field measurements, and results are compared to GIC measurements from recent years. The GICs are generally predicted better by an LSTM trained on values from a specific substation, but only a fraction of the largest GICs are correctly predicted. This model had a correlation with measurements of around 0.6, and a root-mean-square error of 0.7 A. The probability of detecting mild activity in GICs is around 50%, and 15% for larger GICs.
△ Less
Submitted 16 February, 2022; v1 submitted 14 September, 2021;
originally announced September 2021.
-
Multipoint interplanetary coronal mass ejections observed with Solar Orbiter, BepiColombo, Parker Solar Probe, Wind and STEREO-A
Authors:
C. Möstl,
A. J. Weiss,
M. A. Reiss,
T. Amerstorfer,
R. L. Bailey,
J. Hinterreiter,
M. Bauer,
D. Barnes,
J. A. Davies,
R. A. Harrison,
J. L. Freiherr von Forstner,
E. E. Davies,
D. Heyner,
T. Horbury,
S. D. Bale
Abstract:
We report the result of the first search for multipoint in situ and imaging observations of interplanetary coronal mass ejections (ICMEs) starting with the first Solar Orbiter (SolO) data in 2020 April - 2021 April. A data exploration analysis is performed including visualizations of the magnetic field and plasma observations made by the five spacecraft SolO, BepiColombo, Parker Solar Probe (PSP),…
▽ More
We report the result of the first search for multipoint in situ and imaging observations of interplanetary coronal mass ejections (ICMEs) starting with the first Solar Orbiter (SolO) data in 2020 April - 2021 April. A data exploration analysis is performed including visualizations of the magnetic field and plasma observations made by the five spacecraft SolO, BepiColombo, Parker Solar Probe (PSP), Wind and STEREO-A, in connection with coronagraph and heliospheric imaging observations from STEREO-A/SECCHI and SOHO/LASCO. We identify ICME events that could be unambiguously followed with the STEREO-A heliospheric imagers during their interplanetary propagation to their impact at the aforementioned spacecraft, and look for events where the same ICME is seen in situ by widely separated spacecraft. We highlight two events: (1) a small streamer blowout CME on 2020 June 23 observed with a triple lineup by PSP, BepiColombo and Wind, guided by imaging with STEREO-A, and (2) the first fast CME of solar cycle 25 ($ \approx 1600$ km s$^{-1}$) on 2020 November 29 observed in situ by PSP and STEREO-A. These results are useful for modeling the magnetic structure of ICMEs and the interplanetary evolution and global shape of their flux ropes and shocks, and for studying the propagation of solar energetic particles. The combined data from these missions are already turning out to be a treasure trove for space weather research and are expected to become even more valuable with an increasing number of ICME events expected during the rise and maximum of solar cycle 25.
△ Less
Submitted 4 January, 2022; v1 submitted 15 September, 2021;
originally announced September 2021.
-
Drag-based CME modeling with heliospheric images incorporating frontal deformation: ELEvoHI 2.0
Authors:
J. Hinterreiter,
T. Amerstorfer,
M. Temmer,
M. A. Reiss,
A. J. Weiss,
C. Möstl,
L. A. Barnard,
J. Pomoell,
M. Bauer,
U. V. Amerstorfer
Abstract:
The evolution and propagation of coronal mass ejections (CMEs) in interplanetary space is still not well understood. As a consequence, accurate arrival time and arrival speed forecasts are an unsolved problem in space weather research. In this study, we present the ELlipse Evolution model based on HI observations (ELEvoHI) and introduce a deformable front to this model. ELEvoHI relies on heliosphe…
▽ More
The evolution and propagation of coronal mass ejections (CMEs) in interplanetary space is still not well understood. As a consequence, accurate arrival time and arrival speed forecasts are an unsolved problem in space weather research. In this study, we present the ELlipse Evolution model based on HI observations (ELEvoHI) and introduce a deformable front to this model. ELEvoHI relies on heliospheric imagers (HI) observations to obtain the kinematics of a CME. With the newly developed deformable front, the model is able to react to the ambient solar wind conditions during the entire propagation and along the whole front of the CME. To get an estimate of the ambient solar wind conditions, we make use of three different models: Heliospheric Upwind eXtrapolation model (HUX), Heliospheric Upwind eXtrapolation with time dependence model (HUXt), and EUropean Heliospheric FORecasting Information Asset (EUHFORIA). We test the deformable front on a CME first observed in STEREO-A/HI on February 3, 2010 14:49 UT. For this case study, the deformable front provides better estimates of the arrival time and arrival speed than the original version of ELEvoHI using an elliptical front. The new implementation enables us to study the parameters influencing the propagation of the CME not only for the apex, but for the entire front. The evolution of the CME front, especially at the flanks, is highly dependent on the ambient solar wind model used. An additional advantage of the new implementation is given by the possibility to provide estimates of the CME mass.
△ Less
Submitted 18 August, 2021;
originally announced August 2021.
-
Predicting CMEs using ELEvoHI with STEREO-HI beacon data
Authors:
Maike Bauer,
Tanja Amerstorfer,
Jürgen Hinterreiter,
Andreas J. Weiss,
Jackie A. Davies,
Christian Möstl,
Ute V. Amerstorfer,
Martin A. Reiss,
Richard A. Harrison
Abstract:
Being able to accurately predict the arrival of coronal mass ejections (CMEs) at Earth has been a long-standing problem in space weather research and operations. In this study, we use the ELlipse Evolution model based on Heliospheric Images (ELEvoHI) to predict the arrival time and speed of 10 CME events that were observed by HI on the STEREO-A spacecraft between 2010 and 2020. Additionally, we in…
▽ More
Being able to accurately predict the arrival of coronal mass ejections (CMEs) at Earth has been a long-standing problem in space weather research and operations. In this study, we use the ELlipse Evolution model based on Heliospheric Images (ELEvoHI) to predict the arrival time and speed of 10 CME events that were observed by HI on the STEREO-A spacecraft between 2010 and 2020. Additionally, we introduce a Python tool for downloading and preparing STEREO-HI data, as well as tracking CMEs. In contrast to most previous studies, we use not only science data, which has a relatively high spatial and temporal resolution, but also low-quality beacon data, which is - in contrast to science data - provided in real-time by the STEREO-A spacecraft. We do not use data from the STEREO-B spacecraft. We get a mean absolute error of 8.81 $\pm$ 3.18 h / 59 $\pm$ 31 kms$^{-1}$ for arrival time/speed predictions using science data and 11.36 $\pm$ 8.69 h / 106 $\pm$ 61 kms$^{-1}$ for beacon data. We find that using science data generally leads to more accurate predictions, but using beacon data with the ELEvoHI model is certainly a viable choice in the absence of higher resolution real-time data. We propose that these differences could be minimized if not eliminated altogether if higher quality real-time data was available, either by enhancing the quality of the already available data or coming from a new mission carrying a HI instrument on-board.
△ Less
Submitted 7 December, 2021; v1 submitted 18 August, 2021;
originally announced August 2021.
-
The Observational Uncertainty of Coronal Hole Boundaries in Automated Detection Schemes
Authors:
Martin A. Reiss,
Karin Muglach,
Christian Möstl,
Charles N. Arge,
Rachel Bailey,
Veronique Delouille,
Tadhg M. Garton,
Amr Hamada,
Stefan Hofmeister,
Egor Illarionov,
Robert Jarolim,
Michael S. F. Kirk,
Alexander Kosovichev,
Larisza Krista,
Sangwoo Lee,
Chris Lowder,
Peter J. MacNeice,
Astrid Veronig,
ISWAT Coronal Hole Boundary Working Team
Abstract:
Coronal holes are the observational manifestation of the solar magnetic field open to the heliosphere and are of pivotal importance for our understanding of the origin and acceleration of the solar wind. Observations from space missions such as the Solar Dynamics Observatory now allow us to study coronal holes in unprecedented detail. Instrumental effects and other factors, however, pose a challen…
▽ More
Coronal holes are the observational manifestation of the solar magnetic field open to the heliosphere and are of pivotal importance for our understanding of the origin and acceleration of the solar wind. Observations from space missions such as the Solar Dynamics Observatory now allow us to study coronal holes in unprecedented detail. Instrumental effects and other factors, however, pose a challenge to automatically detect coronal holes in solar imagery. The science community addresses these challenges with different detection schemes. Until now, little attention has been paid to assessing the disagreement between these schemes. In this COSPAR ISWAT initiative, we present a comparison of nine automated detection schemes widely-applied in solar and space science. We study, specifically, a prevailing coronal hole observed by the Atmospheric Imaging Assembly instrument on 2018 May 30. Our results indicate that the choice of detection scheme has a significant effect on the location of the coronal hole boundary. Physical properties in coronal holes such as the area, mean intensity, and mean magnetic field strength vary by a factor of up to 4.5 between the maximum and minimum values. We conclude that our findings are relevant for coronal hole research from the past decade, and are therefore of interest to the solar and space research community.
△ Less
Submitted 26 March, 2021;
originally announced March 2021.
-
Why are ELEvoHI CME arrival predictions different if based on STEREO-A or STEREO-B heliospheric imager observations?
Authors:
Jürgen Hinterreiter,
Tanja Amerstorfer,
Martin A. Reiss,
Christian Möstl,
Manuela Temmer,
Maike Bauer,
Ute V. Amerstorfer,
Rachel L. Bailey,
Andreas J. Weiss,
Jackie A. Davies,
Luke A. Barnard,
Mathew J. Owens
Abstract:
Accurate forecasting of the arrival time and arrival speed of coronal mass ejections (CMEs) is a unsolved problem in space weather research. In this study, a comparison of the predicted arrival times and speeds for each CME based, independently, on the inputs from the two STEREO vantage points is carried out. We perform hindcasts using ELlipse Evolution model based on Heliospheric Imager observati…
▽ More
Accurate forecasting of the arrival time and arrival speed of coronal mass ejections (CMEs) is a unsolved problem in space weather research. In this study, a comparison of the predicted arrival times and speeds for each CME based, independently, on the inputs from the two STEREO vantage points is carried out. We perform hindcasts using ELlipse Evolution model based on Heliospheric Imager observations (ELEvoHI) ensemble modelling. An estimate of the ambient solar wind conditions is obtained by the Wang-Sheeley-Arge/Heliospheric Upwind eXtrapolation (WSA/HUX) model combination that serves as input to ELEvoHI. We carefully select 12 CMEs between February 2010 and July 2012 that show clear signatures in both STEREO-A and STEREO-B HI time-elongation maps, that propagate close to the ecliptic plane, and that have corresponding in situ signatures at Earth. We find a mean arrival time difference of 6.5 hrs between predictions from the two different viewpoints, which can reach up to 9.5 hrs for individual CMEs, while the mean arrival speed difference is 63 km s$^{-1}$. An ambient solar wind with a large speed variance leads to larger differences in the STEREO-A and STEREO-B CME arrival time predictions ($cc~=~0.92$). Additionally, we compare the predicted arrivals, from both spacecraft, to the actual in situ arrivals at Earth and find a mean absolute error of 7.5 $\pm$ 9.5 hrs for the arrival time and 87 $\pm$ 111 km s$^{-1}$ for the arrival speed. There is no tendency for one spacecraft to provide more accurate arrival predictions than the other.
△ Less
Submitted 15 February, 2021;
originally announced February 2021.
-
In situ multi-spacecraft and remote imaging observations of the first CME detected by Solar Orbiter and BepiColombo
Authors:
E. E. Davies,
C. Möstl,
M. J. Owens,
A. J. Weiss,
T. Amerstorfer,
J. Hinterreiter,
M. Bauer,
R. L. Bailey,
M. A. Reiss,
R. J. Forsyth,
T. S. Horbury,
H. O'Brien,
V. Evans,
V. Angelini,
D. Heyner,
I. Richter,
H-U. Auster,
W. Magnes,
W. Baumjohann,
D. Fischer,
D. Barnes,
J. A. Davies,
R. A. Harrison
Abstract:
On 2020 April 19 a coronal mass ejection (CME) was detected in situ by Solar Orbiter at a heliocentric distance of about 0.8 AU. The CME was later observed in situ on April 20th by the Wind and BepiColombo spacecraft whilst BepiColombo was located very close to Earth. This CME presents a good opportunity for a triple radial alignment study, as the spacecraft were separated by less than 5$^\circ$ i…
▽ More
On 2020 April 19 a coronal mass ejection (CME) was detected in situ by Solar Orbiter at a heliocentric distance of about 0.8 AU. The CME was later observed in situ on April 20th by the Wind and BepiColombo spacecraft whilst BepiColombo was located very close to Earth. This CME presents a good opportunity for a triple radial alignment study, as the spacecraft were separated by less than 5$^\circ$ in longitude. The source of the CME, which was launched on April 15th, was an almost entirely isolated streamer blowout. STEREO-A observed the event remotely from -75.1$^\circ$ longitude, which is an exceptionally well suited viewpoint for heliospheric imaging of an Earth directed CME. The configuration of the four spacecraft has provided an exceptionally clean link between remote imaging and in situ observations of the CME. We have used the in situ observations of the CME at Solar Orbiter, Wind, and BepiColombo, and the remote observations of the CME at STEREO-A in combination with flux rope models to determine the global shape of the CME and its evolution as it propagated through the inner heliosphere. A clear flattening of the CME cross-section has been observed by STEREO-A, and further confirmed by comparing profiles of the flux rope models to the in situ data, where the distorted flux rope cross-section qualitatively agrees most with in situ observations of the magnetic field at Solar Orbiter. Comparing in situ observations of the magnetic field between spacecraft, we find that the dependence of the maximum (mean) magnetic field strength decreases with heliocentric distance as $r^{-1.24 \pm 0.50}$ ($r^{-1.12 \pm 0.14}$), in disagreement with previous studies. Further assessment of the axial and poloidal magnetic field strength dependencies suggests that the expansion of the CME is likely neither self-similar nor cylindrically symmetric.
△ Less
Submitted 23 February, 2021; v1 submitted 14 December, 2020;
originally announced December 2020.
-
Analysis of coronal mass ejection flux rope signatures using 3DCORE and approximate Bayesian Computation
Authors:
Andreas J. Weiss,
Christian Möstl,
Tanja Amerstorfer,
Rachel L. Bailey,
Martin A. Reiss,
Jürgen Hinterreiter,
Ute A. Amerstorfer,
Maike Bauer
Abstract:
We present a major update to the 3D coronal rope ejection (3DCORE) technique for modeling coronal mass ejection flux ropes in conjunction with an Approximate Bayesian Computation (ABC) algorithm that is used for fitting the model to in situ magnetic field measurements. The model assumes an empirically motivated torus-like flux rope structure that expands self-similarly within the heliosphere, is i…
▽ More
We present a major update to the 3D coronal rope ejection (3DCORE) technique for modeling coronal mass ejection flux ropes in conjunction with an Approximate Bayesian Computation (ABC) algorithm that is used for fitting the model to in situ magnetic field measurements. The model assumes an empirically motivated torus-like flux rope structure that expands self-similarly within the heliosphere, is influenced by a simplified interaction with the solar wind environment, and carries along an embedded analytical magnetic field. The improved 3DCORE implementation allows us to generate extremely large ensemble simulations which we then use to find global best-fit model parameters using an ABC sequential Monte Carlo (SMC) algorithm. The usage of this algorithm, under some basic assumptions on the uncertainty of the magnetic field measurements, allows us to furthermore generate estimates on the uncertainty of model parameters using only a single in situ observation. We apply our model to synthetically generated measurements to prove the validity of our implementation for the fitting procedure. We also present a brief analysis, within the scope of our model, of an event captured by Parker Solar Probe (PSP) shortly after its first fly-by of the Sun on 2018 November 12 at 0.25 AU. The presented toolset is also easily extendable to the analysis of events captured by multiple spacecraft and will therefore facilitate future multi-point studies.
△ Less
Submitted 17 November, 2020; v1 submitted 1 September, 2020;
originally announced September 2020.
-
Evaluation of CME Arrival Prediction Using Ensemble Modeling Based on Heliospheric Imaging Observations
Authors:
Tanja Amerstorfer,
Jürgen Hinterreiter,
Martin A. Reiss,
Christian Möstl,
Jackie A. Davies,
Rachel L. Bailey,
Andreas J. Weiss,
Mateja Dumbović,
Maike Bauer,
Ute V. Amerstorfer,
Richard A. Harrison
Abstract:
In this study, we evaluate a coronal mass ejection (CME) arrival prediction tool that utilizes the wide-angle observations made by STEREO's heliospheric imagers (HI). The unsurpassable advantage of these imagers is the possibility to observe the evolution and propagation of a CME from close to the Sun out to 1 AU and beyond. We believe that by exploiting this capability, instead of relying on coro…
▽ More
In this study, we evaluate a coronal mass ejection (CME) arrival prediction tool that utilizes the wide-angle observations made by STEREO's heliospheric imagers (HI). The unsurpassable advantage of these imagers is the possibility to observe the evolution and propagation of a CME from close to the Sun out to 1 AU and beyond. We believe that by exploiting this capability, instead of relying on coronagraph observations only, it is possible to improve today's CME arrival time predictions. The ELlipse Evolution model based on HI observations (ELEvoHI) assumes that the CME frontal shape within the ecliptic plane is an ellipse, and allows the CME to adjust to the ambient solar wind speed, i.e. it is drag-based. ELEvoHI is used to perform ensemble simulations by varying the CME frontal shape within given boundary conditions that are consistent with the observations made by HI. In this work, we evaluate different set-ups of the model by performing hindcasts for 15 well-defined isolated CMEs that occurred when STEREO was near L4/5, between the end of 2008 and the beginning of 2011. In this way, we find a mean absolute error of between $6.2\pm7.9$ h and $9.9\pm13$ h depending on the model set-up used. ELEvoHI is specified for using data from future space weather missions carrying HIs located at L5 or L1. It can also be used with near real-time STEREO-A HI beacon data to provide CME arrival predictions during the next $\sim7$ years when STEREO-A is observing the Sun-Earth space.
△ Less
Submitted 16 February, 2021; v1 submitted 6 August, 2020;
originally announced August 2020.
-
Prediction of the in situ coronal mass ejection rate for solar cycle 25: Implications for Parker Solar Probe in situ observations
Authors:
Christian Möstl,
Andreas J. Weiss,
Rachel L. Bailey,
Martin A. Reiss,
Tanja Amerstorfer,
Jürgen Hinterreiter,
Maike Bauer,
Scott W. McIntosh,
Noé Lugaz,
David Stansby
Abstract:
The Parker Solar Probe (PSP) and Solar Orbiter missions are designed to make groundbreaking observations of the Sun and interplanetary space within this decade. We show that a particularly interesting in situ observation of an interplanetary coronal mass ejection (ICME) by PSP may arise during close solar flybys ($< 0.1$~AU). During these times, the same magnetic flux rope inside an ICME could be…
▽ More
The Parker Solar Probe (PSP) and Solar Orbiter missions are designed to make groundbreaking observations of the Sun and interplanetary space within this decade. We show that a particularly interesting in situ observation of an interplanetary coronal mass ejection (ICME) by PSP may arise during close solar flybys ($< 0.1$~AU). During these times, the same magnetic flux rope inside an ICME could be observed in situ by PSP twice, by impacting its frontal part as well as its leg. Investigating the odds of this situation, we forecast the ICME rate in solar cycle 25 based on 2 models for the sunspot number (SSN): (1) the forecast of an expert panel in 2019 (maximum SSN = 115), and (2) a prediction by McIntosh et al. (2020, maximum SSN = 232). We link the SSN to the observed ICME rates in solar cycles 23 and 24 with the Richardson and Cane list and our own ICME catalog, and calculate that between 1 and 7 ICMEs will be observed by PSP at heliocentric distances $< 0.1$ AU until 2025, including 1$σ$ uncertainties. We then model the potential flux rope signatures of such a double-crossing event with the semi-empirical 3DCORE flux rope model, showing a telltale elevation of the radial magnetic field component $B_R$, and a sign reversal in the component $B_N$ normal to the solar equator compared to field rotation in the first encounter. This holds considerable promise to determine the structure of CMEs close to their origin in the solar corona.
△ Less
Submitted 17 September, 2020; v1 submitted 29 July, 2020;
originally announced July 2020.
-
Using gradient boosting regression to improve ambient solar wind model predictions
Authors:
R. L. Bailey,
M. A. Reiss,
C. N. Arge,
C. Möstl,
M. J. Owens,
U. V. Amerstorfer,
C. J. Henney,
T. Amerstorfer,
A. J. Weiss,
J. Hinterreiter
Abstract:
Studying the ambient solar wind, a continuous pressure-driven plasma flow emanating from our Sun, is an important component of space weather research. The ambient solar wind flows in interplanetary space determine how solar storms evolve through the heliosphere before reaching Earth, and especially during solar minimum are themselves a driver of activity in the Earth's magnetic field. Accurately f…
▽ More
Studying the ambient solar wind, a continuous pressure-driven plasma flow emanating from our Sun, is an important component of space weather research. The ambient solar wind flows in interplanetary space determine how solar storms evolve through the heliosphere before reaching Earth, and especially during solar minimum are themselves a driver of activity in the Earth's magnetic field. Accurately forecasting the ambient solar wind flow is therefore imperative to space weather awareness. Here we present a machine learning approach in which solutions from magnetic models of the solar corona are used to output the solar wind conditions near the Earth. The results are compared to observations and existing models in a comprehensive validation analysis, and the new model outperforms existing models in almost all measures. In addition, this approach offers a new perspective to discuss the role of different input data to ambient solar wind modeling, and what this tells us about the underlying physical processes. The final model discussed here represents an extremely fast, well-validated and open-source approach to the forecasting of ambient solar wind at Earth.
△ Less
Submitted 23 March, 2021; v1 submitted 23 June, 2020;
originally announced June 2020.
-
Prediction of Dst during solar minimum using in situ measurements at L5
Authors:
R. L. Bailey,
C. Möstl,
M. A. Reiss,
A. J. Weiss,
U. V. Amerstorfer,
T. Amerstorfer,
J. Hinterreiter,
W. Magnes,
R. Leonhardt
Abstract:
Geomagnetic storms resulting from high-speed streams can have significant negative impacts on modern infrastructure due to complex interactions between the solar wind and geomagnetic field. One measure of the extent of this effect is the Kyoto $Dst$ index. We present a method to predict $Dst$ from data measured at the Lagrange 5 (L5) point, which allows for forecasts of solar wind development 4.5…
▽ More
Geomagnetic storms resulting from high-speed streams can have significant negative impacts on modern infrastructure due to complex interactions between the solar wind and geomagnetic field. One measure of the extent of this effect is the Kyoto $Dst$ index. We present a method to predict $Dst$ from data measured at the Lagrange 5 (L5) point, which allows for forecasts of solar wind development 4.5 days in advance of the stream reaching the Earth. Using the STEREO-B satellite as a proxy, we map data measured near L5 to the near-Earth environment and make a prediction of the $Dst$ from this point using the Temerin-Li $Dst$ model enhanced from the original using a machine learning approach. We evaluate the method accuracy with both traditional point-to-point error measures and an event-based validation approach. The results show that predictions using L5 data outperform a 27-day solar wind persistence model in all validation measures but do not achieve a level similar to an L1 monitor. Offsets in timing and the rapidly-changing development of $B_z$ in comparison to $B_x$ and $B_y$ reduce the accuracy. Predictions of $Dst$ from L5 have an RMSE of $9$ nT, which is double the error of $4$ nT using measurements conducted near the Earth. The most useful application of L5 measurements is shown to be in predicting the minimum $Dst$ for the next four days. This method is being implemented in a real-time forecast setting using STEREO-A as an L5 proxy, and has implications for the usefulness of future L5 missions.
△ Less
Submitted 1 May, 2020;
originally announced May 2020.
-
Coronal hole evolution from multi-viewpoint data as input for a STEREO solar wind speed persistence model
Authors:
M. Temmer,
J. Hinterreiter,
M. A. Reiss
Abstract:
We present a concept study of a solar wind forecasting method for Earth, based on persistence modeling from STEREO in-situ measurements combined with multi-viewpoint EUV observational data. By comparing the fractional areas of coronal holes (CHs) extracted from EUV data of STEREO and SoHO/SDO, we perform an uncertainty assessment derived from changes in the CHs and apply those changes to the predi…
▽ More
We present a concept study of a solar wind forecasting method for Earth, based on persistence modeling from STEREO in-situ measurements combined with multi-viewpoint EUV observational data. By comparing the fractional areas of coronal holes (CHs) extracted from EUV data of STEREO and SoHO/SDO, we perform an uncertainty assessment derived from changes in the CHs and apply those changes to the predicted solar wind speed profile at 1AU. We evaluate the method for the time period 2008-2012, and compare the results to a persistence model based on ACE in-situ measurements and to the STEREO persistence model without implementing the information on CH evolution. Compared to an ACE based persistence model, the performance of the STEREO persistence model which takes into account the evolution of CHs, is able to increase the number of correctly predicted high-speed streams by about 12%, and to decrease the number of missed streams by about 23%, and the number of false alarms by about 19%. However, the added information on CH evolution is not able to deliver more accurate speed values for the forecast than using the STEREO persistence model without CH information which performs better than an ACE based persistence model. Investigating the CH evolution between STEREO and Earth view for varying separation angles over ~25-140° East of Earth, we derive some relation between expanding CHs and increasing solar wind speed, but a less clear relation for decaying CHs and decreasing solar wind speed. This fact most likely prevents the method from making more precise forecasts. The obtained results support a future L5 mission and show the importance and valuable contribution using multi-viewpoint data.
△ Less
Submitted 30 January, 2018;
originally announced January 2018.
-
Modeling observations of solar coronal mass ejections with heliospheric imagers verified with the Heliophysics System Observatory
Authors:
C. Möstl,
A. Isavnin,
P. D. Boakes,
E. K. J. Kilpua,
J. A. Davies,
R. A. Harrison,
D. Barnes,
V. Krupar,
J. P. Eastwood,
S. W. Good,
R. J. Forsyth,
V. Bothmer,
M. A. Reiss,
T. Amerstorfer,
R. M. Winslow,
B. J. Anderson,
L. C. Philpott,
L. Rodriguez,
A. P. Rouillard,
P. T. Gallagher,
T. L. Zhang
Abstract:
We present an advance towards accurately predicting the arrivals of coronal mass ejections (CMEs) at the terrestrial planets, including Earth. For the first time, we are able to assess a CME prediction model using data over 2/3 of a solar cycle of observations with the Heliophysics System Observatory. We validate modeling results of 1337 CMEs observed with the Solar Terrestrial Relations Observato…
▽ More
We present an advance towards accurately predicting the arrivals of coronal mass ejections (CMEs) at the terrestrial planets, including Earth. For the first time, we are able to assess a CME prediction model using data over 2/3 of a solar cycle of observations with the Heliophysics System Observatory. We validate modeling results of 1337 CMEs observed with the Solar Terrestrial Relations Observatory (STEREO) heliospheric imagers (HI) (science data) from 8 years of observations by 5 in situ observing spacecraft. We use the self-similar expansion model for CME fronts assuming 60 degree longitudinal width, constant speed and constant propagation direction. With these assumptions we find that 23%-35% of all CMEs that were predicted to hit a certain spacecraft lead to clear in situ signatures, so that for 1 correct prediction, 2 to 3 false alarms would have been issued. In addition, we find that the prediction accuracy does not degrade with the HI longitudinal separation from Earth. Predicted arrival times are on average within 2.6 +/- 16.6 hours difference of the in situ arrival time, similar to analytical and numerical modeling, and a true skill statistic of 0.21. We also discuss various factors that may improve the accuracy of space weather forecasting using wide-angle heliospheric imager observations. These results form a first order approximated baseline of the prediction accuracy that is possible with HI and other methods used for data by an operational space weather mission at the Sun-Earth L5 point.
△ Less
Submitted 7 July, 2017; v1 submitted 2 March, 2017;
originally announced March 2017.
-
Characteristics of Low-Latitude Coronal Holes near the Maximum of Solar cycle 24
Authors:
S. J. Hofmeister,
A. Veronig,
M. A. Reiss,
M. Temmer,
S. Vennerstrom,
B. Vršnak,
B. Heber
Abstract:
We investigate the statistics of 288 low-latitude coronal holes extracted from SDO/AIA-193 filtergrams over the time range 2011/01/01 to 2013/12/31. We analyse the distribution of characteristic coronal hole properties, such as the areas, mean AIA-193 intensities, and mean magnetic field densities, the local distribution of the SDO/AIA-193 intensity and the magnetic field within the coronal holes,…
▽ More
We investigate the statistics of 288 low-latitude coronal holes extracted from SDO/AIA-193 filtergrams over the time range 2011/01/01 to 2013/12/31. We analyse the distribution of characteristic coronal hole properties, such as the areas, mean AIA-193 intensities, and mean magnetic field densities, the local distribution of the SDO/AIA-193 intensity and the magnetic field within the coronal holes, and the distribution of magnetic flux tubes in coronal holes. We find that the mean magnetic field density of all coronal holes under study is 3.0 +- 1.6 G, and the percentage of unbalanced magnetic flux is 49 +- 16 %. The mean magnetic field density, the mean unsigned magnetic field density, and the percentage of unbalanced magnetic flux of coronal holes depend strongly pairwise on each other, with correlation coefficients cc > 0.92. Furthermore, we find that the unbalanced magnetic flux of the coronal holes is predominantly concentrated in magnetic flux tubes: 38 % (81 %) of the unbalanced magnetic flux of coronal holes arises from only 1 % (10 %) of the coronal hole area, clustered in magnetic flux tubes with field strengths > 50 G (10 G). The average magnetic field density and the unbalanced magnetic flux derived from the magnetic flux tubes correlate with the mean magnetic field density and the unbalanced magnetic flux of the overall coronal hole (cc > 0.93). These findings give evidence that the overall magnetic characteristics of coronal holes are governed by the characteristics of the magnetic flux tubes.
△ Less
Submitted 7 February, 2017;
originally announced February 2017.
-
Preconditioning of interplanetary space due to transient CME disturbances
Authors:
Manuela Temmer,
Martin A. Reiss,
Ljubomir Nikolic,
Stefan J. Hofmeister,
Astrid M. Veronig
Abstract:
Interplanetary space is characteristically structured mainly by high-speed solar wind streams emanating from coronal holes and transient disturbances such as coronal mass ejections (CMEs). While high-speed solar wind streams pose a continuous outflow, CMEs abruptly disrupt the rather steady structure causing large deviations from the quiet solar wind conditions. For the first time, we give a quant…
▽ More
Interplanetary space is characteristically structured mainly by high-speed solar wind streams emanating from coronal holes and transient disturbances such as coronal mass ejections (CMEs). While high-speed solar wind streams pose a continuous outflow, CMEs abruptly disrupt the rather steady structure causing large deviations from the quiet solar wind conditions. For the first time, we give a quantification of the duration of disturbed conditions (preconditioning) for interplanetary space caused by CMEs. To this aim, we investigate the plasma speed component of the solar wind and the impact of in situ detected CMEs (ICMEs), compared to different background solar wind models (ESWF, WSA, persistence model) for the time range 2011-2015. We quantify in terms of standard error measures the deviations between modeled background solar wind speed and observed solar wind speed. Using the mean absolute error, we obtain an average deviation for quiet solar activity within a range of 75.1-83.1 km/s. Compared to this baseline level, periods within the ICME interval showed an increase of 18-32% above the expected background and the period of 2 days after the ICME displayed an increase of 9-24%. We obtain a total duration of enhanced deviations over about 3 and up to 6 days after the ICME start, which is much longer than the average duration of an ICME disturbance itself (~1.3 days), concluding that interplanetary space needs ~2-5 days to recover from the impact of ICMEs. The obtained results have strong implications for studying CME propagation behavior and also for space weather forecasting.
△ Less
Submitted 19 December, 2016;
originally announced December 2016.
-
Improvements on coronal hole detection in SDO/AIA images using supervised classification
Authors:
Martin A. Reiss,
Stefan J. Hofmeister,
Ruben De Visscher,
Manuela Temmer,
Astrid M. Veronig,
Véronique Delouille,
Benjamin Mampaey,
Helmut Ahammer
Abstract:
We demonstrate the use of machine learning algorithms in combination with segmentation techniques in order to distinguish coronal holes and filaments in SDO/AIA EUV images of the Sun. Based on two coronal hole detection techniques (intensity-based thresholding, SPoCA), we prepared data sets of manually labeled coronal hole and filament channel regions present on the Sun during the time range 2011…
▽ More
We demonstrate the use of machine learning algorithms in combination with segmentation techniques in order to distinguish coronal holes and filaments in SDO/AIA EUV images of the Sun. Based on two coronal hole detection techniques (intensity-based thresholding, SPoCA), we prepared data sets of manually labeled coronal hole and filament channel regions present on the Sun during the time range 2011 - 2013. By map** the extracted regions from EUV observations onto HMI line-of-sight magnetograms we also include their magnetic characteristics. We computed shape measures from the segmented binary maps as well as first order and second order texture statistics from the segmented regions in the EUV images and magnetograms. These attributes were used for data mining investigations to identify the most performant rule to differentiate between coronal holes and filament channels. We applied several classifiers, namely Support Vector Machine, Linear Support Vector Machine, Decision Tree, and Random Forest and found that all classification rules achieve good results in general, with linear SVM providing the best performances (with a true skill statistic of ~0.90). Additional information from magnetic field data systematically improves the performance across all four classifiers for the SPoCA detection. Since the calculation is inexpensive in computing time, this approach is well suited for applications on real-time data. This study demonstrates how a machine learning approach may help improve upon an unsupervised feature extraction method.
△ Less
Submitted 22 June, 2015;
originally announced June 2015.
-
Strong coronal channelling and interplanetary evolution of a solar storm up to Earth and Mars
Authors:
Christian Möstl,
Tanja Rollett,
Rudy A. Frahm,
Ying D. Liu,
David M. Long,
Robin C. Colaninno,
Martin A. Reiss,
Manuela Temmer,
Charles J. Farrugia,
Arik Posner,
Mateja Dumbović,
Miho Janvier,
Pascal Démoulin,
Peter Boakes,
Andy Devos,
Emil Kraaikamp,
Mona L. Mays,
Bojan Vrsnak
Abstract:
The severe geomagnetic effects of solar storms or coronal mass ejections (CMEs) are to a large degree determined by their propagation direction with respect to Earth. There is a lack of understanding of the processes that determine their non-radial propagation. Here we present a synthesis of data from seven different space missions of a fast CME, which originated in an active region near the disk…
▽ More
The severe geomagnetic effects of solar storms or coronal mass ejections (CMEs) are to a large degree determined by their propagation direction with respect to Earth. There is a lack of understanding of the processes that determine their non-radial propagation. Here we present a synthesis of data from seven different space missions of a fast CME, which originated in an active region near the disk centre and, hence, a significant geomagnetic impact was forecasted. However, the CME is demonstrated to be channelled during eruption into a direction + 37+/-10 degree (longitude) away from its source region, leading only to minimal geomagnetic effects. In situ observations near Earth and Mars confirm the channelled CME motion, and are consistent with an ellipse shape of the CME-driven shock provided by the new Ellipse Evolution model, presented here. The results enhance our understanding of CME propagation and shape, which can help to improve space weather forecasts.
△ Less
Submitted 10 June, 2015; v1 submitted 9 June, 2015;
originally announced June 2015.