-
A physical optics characterization of the beam shape and sidelobe levels for the Atacama Large Aperture Submillimeter Telescope (AtLAST)
Authors:
Roberto Puddu,
Patricio A. Gallardo,
Tony Mroczkowski,
Pierre Dubois-dit-Bonclaude,
Manuel Groh,
Aleksej Kiselev,
Matthias Reichert,
Martin Timpe,
Claudia Cicone,
Hans J. Kaercher,
Rolando Dünner
Abstract:
(abridged) The Atacama Large Aperture Submillimeter Telescope (AtLAST) is undergoing a design study for a large (50 meter) single-dish submm-wavelength Ritchey-Chrétien telescope to be located 5050 meters above sea level in the Atacama Desert in northern Chile. It will allow for observations covering 30 to 950 GHz. Observing at such high frequencies with a 50~m primary mirror will be challenging,…
▽ More
(abridged) The Atacama Large Aperture Submillimeter Telescope (AtLAST) is undergoing a design study for a large (50 meter) single-dish submm-wavelength Ritchey-Chrétien telescope to be located 5050 meters above sea level in the Atacama Desert in northern Chile. It will allow for observations covering 30 to 950 GHz. Observing at such high frequencies with a 50~m primary mirror will be challenging, and has never been attempted thus far. This observational capability demands exquisite control of systematics to ensure a reliable beam shape, and to mitigate the expected sidelobe levels. Among them, critical issues that large telescopes like AtLAST need to deal with are introduced by the panel gap pattern, the secondary mirror supporting struts, mirror deformations produced by thermal and gravitational effects, and Ruze scattering due to surface roughness. Proprietary software such as TICRA-Tools allows for full-wave, complex-field physical optics simulations taking into account these features. Such calculations can be computationally expensive since the mirror surfaces are gridded (meshed) into a fine array in which each element is treated as a current source. If the telescope size is large and the wavelengths are short this may lead to very long running times. Here we present a set of physical optics results that allow us to estimate the performance of the telescope in terms of beam shape, directivity, sidelobes level and stray light. We also discuss how we addressed the computational challenges, and provide caveats on how to shorten the run times. Above all, we conclude that the scattering effects from the gaps and tertiary support structure are minimal, and subdominant to the Ruze scattering.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
The Optical Design Concept for the Atacama Large Aperture Submillimeter Telescope (AtLAST)
Authors:
Patricio A. Gallardo,
Roberto Puddu,
Tony Mroczkowski,
Martin Timpe,
Pierre Dubois-dit-Bonclaude,
Manuel Groh,
Matthias Reichert,
Claudia Cicone,
Hans J. Kaercher
Abstract:
The Atacama Large Aperture Submillimeter Telescope (AtLAST) aims to be the premier next generation large diameter (50-meter) single dish observatory capable of observations across the millimeter/sub-millimeter spectrum, from 30 to 950~GHz. The large primary mirror diameter, the 2-degree field of view and its large 4.7-meter focal surface give AtLAST a high throughput (aperture size times field of…
▽ More
The Atacama Large Aperture Submillimeter Telescope (AtLAST) aims to be the premier next generation large diameter (50-meter) single dish observatory capable of observations across the millimeter/sub-millimeter spectrum, from 30 to 950~GHz. The large primary mirror diameter, the 2-degree field of view and its large 4.7-meter focal surface give AtLAST a high throughput (aperture size times field of view) and grasp (throughput times spectral reach), with the ability to illuminate $>\mathcal{O}(10^7)$ detectors. The optical design concept for AtLAST consists of a numerically optimized two-mirror Ritchey-Chrétien system with an additional flat folding mirror, which enables a quick selection among its planned six instrument positions. We present the optical design concept and discuss the expected optical performance of AtLAST. We then present design concepts that can be implemented in the receiver and instrument optics to correct for astigmatism and mitigate the high degree of curvature of the focal surface in order to recover significant fractions of the geometric field of view at sub-millimeter wavelengths.
△ Less
Submitted 17 June, 2024;
originally announced June 2024.
-
Technical requirements flow-down for the concept design of the novel 50-meter Atacama Large Aperture Submm Telescope (AtLAST)
Authors:
Matthias Reichert,
Martin Timpe,
Hans Kaercher,
Tony Mroczkowski,
Manuel Groh,
Aleksej Kiselev,
Claudia Cicone,
Patricio A. Gallardo,
Roberto Puddu,
Pamela Klaassen
Abstract:
The Atacama Large Aperture Submm Telescope (AtLAST) is a concept for a novel 50-meter class single-dish telescope operating at sub-millimeter and millimeter wavelengths (30-950 GHz). The telescope will provide an unprecedentedly wide field of view (FoV) of 1-2 degree diameter with a large receiver cabin housing six major instruments in Nasmyth and Cassegrain positions. The high observing frequenci…
▽ More
The Atacama Large Aperture Submm Telescope (AtLAST) is a concept for a novel 50-meter class single-dish telescope operating at sub-millimeter and millimeter wavelengths (30-950 GHz). The telescope will provide an unprecedentedly wide field of view (FoV) of 1-2 degree diameter with a large receiver cabin housing six major instruments in Nasmyth and Cassegrain positions. The high observing frequencies, combined with the scanning operation movements with up to 3 deg/second, place high demands on the accuracy and stability of the optical and structural components. The design features the introduction of a rocking chair type mount with an iso-statically decoupled main reflector backup structure and an active main reflector surface with a high precision metrology system. The planned site location is in the Chilean Atacama Desert at approximately 5050 meters above sea level, near Llano de Chajnantor. This paper gives an overview of the optical, structural, and mechanical design concepts. It explains the flow-down from key science requirements to technical design decisions as well as showing design analogies from other existing large radio, (sub-)mm, and optical telescopes.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
Energy Recovery System for Large Telescopes
Authors:
Aleksej Kiselev,
Matthias Reichert,
Tony Mroczkowski
Abstract:
In this paper, a kinetic energy recovery system for large telescopes is presented, with the Atacama Large Aperture Submm Telescope (AtLAST) as a possible target application. The system consists of supercapacitors integrated in the DC-link of motor inverters through a bidirectional DC-DC converter. The optimal system design, based on the energy flow analysis within the telescope's power electronics…
▽ More
In this paper, a kinetic energy recovery system for large telescopes is presented, with the Atacama Large Aperture Submm Telescope (AtLAST) as a possible target application. The system consists of supercapacitors integrated in the DC-link of motor inverters through a bidirectional DC-DC converter. The optimal system design, based on the energy flow analysis within the telescope's power electronics, is introduced. The proposed system is simulated as part of the telescope's drives, providing not only a significant reduction in energy consumption of the telescope due to motion, but also remarkably reducing (or shaving) grid power peaks. We find that the system presented here can contribute to making both current and future observatories more sustainable.
△ Less
Submitted 20 June, 2024; v1 submitted 26 April, 2024;
originally announced April 2024.
-
Don't forget the electrons: extending moderately-sized nuclear networks for multidimensional hydrodynamic codes
Authors:
Domingo García-Senz,
Rubén M. Cabezón,
Moritz Reichert,
Axel Sanz,
José A. Escartín,
Athanasios Psaltis,
Almudena Arcones,
Friedrich-Karl Thielemann
Abstract:
We present here an extended nuclear network, with 90 species, designed for being coupled with hydrodynamic simulations, which includes neutrons, protons, electrons, positrons, and the corresponding neutrino and anti-neutrino emission. This network is also coupled with temperature, making it extremely robust and, together with its size, unique of its kind. The inclusion of electron captures on free…
▽ More
We present here an extended nuclear network, with 90 species, designed for being coupled with hydrodynamic simulations, which includes neutrons, protons, electrons, positrons, and the corresponding neutrino and anti-neutrino emission. This network is also coupled with temperature, making it extremely robust and, together with its size, unique of its kind. The inclusion of electron captures on free protons makes the network very appropriate for multidimensional studies of Type Ia supernova explosions, especially when the exploding object is a massive white dwarf.
The results obtained with the proposed medium-sized network compare fairly well, to a few percent, with those computed with the extended network WinNet (> 2000 isotopes) in scenarios reproducing the gross physical conditions of current Type Ia supernova explosion models. In those cases where the carbon and oxygen fuel ignites at high density, the high-temperature plateau typical of the nuclear statistical equilibrium regime is well defined and stable, allowing large integration time steps. We show that the inclusion of electron captures on free protons substantially improves the estimation of the electron fraction of the mixture. Therefore, the pressure is better determined than in networks where electron captures are excluded, which will ultimately lead to more reliable hydrodynamic models. Explosive combustion of helium at low density, occurring near the surface layer of a white dwarf, is also better described with the proposed network, which gives nuclear energy generation rates much closer to WinNet than typical reduced alpha networks.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Design of the 50-meter Atacama Large Aperture Submm Telescope
Authors:
Tony Mroczkowski,
Patricio A. Gallardo,
Martin Timpe,
Aleksej Kiselev,
Manuel Groh,
Hans Kaercher,
Matthias Reichert,
Claudia Cicone,
Roberto Puddu,
Pierre Dubois-dit-Bonclaude,
Daniel Bok,
Erik Dahl,
Mike Macintosh,
Simon Dicker,
Isabelle Viole,
Sabrina Sartori,
Guillermo Andrés Valenzuela Venegas,
Marianne Zeyringer,
Michael Niemack,
Sergio Poppi,
Rodrigo Olguin,
Evanthia Hatziminaoglou,
Carlos De Breuck,
Pamela Klaassen,
Francisco Montenegro-Montes
, et al. (1 additional authors not shown)
Abstract:
Submillimeter and millimeter wavelengths can reveal a vast range of objects and phenomena that are either too cold, too distant, or too hot and energetic to be measured at visible wavelengths. For decades the astronomical community has highlighted the need for a large, high-throughput submm single dish that can map statistically significant portions of the sky with sufficient surface brightness se…
▽ More
Submillimeter and millimeter wavelengths can reveal a vast range of objects and phenomena that are either too cold, too distant, or too hot and energetic to be measured at visible wavelengths. For decades the astronomical community has highlighted the need for a large, high-throughput submm single dish that can map statistically significant portions of the sky with sufficient surface brightness sensitivity and angular and spectral resolution to probe truly representative source populations. The Atacama Large Aperture Submillimeter Telescope (AtLAST), with its 50-m aperture and $2^\circ$ maximal field of view, aims to be such a facility. We present here the full design concept for AtLAST, developed through an EU-funded project. Our design approach begins with a long lineage of submm telescopes, relies on calculations and simulations to realize the optics, and uses finite element analysis to optimize the mechanical structure and subsystems. The result is an innovative rocking chair design with six instrument bays, two of which are mounted on Nasmyth platforms. AtLAST will be capable of $3^\circ\,\rm s^{-1}$ scanning and $1^\circ\,\rm s^{-2}$ acceleration, and will feature a surface accuracy of $\leq 20~μ$m half wavefront error allowing observations up to $\approx 950$~GHz. Further, AtLAST will be a sustainable, visionary facility that will allow upgrades for decades to come. The demanding design requirements for AtLAST, set by transformative science goals, were met by combining novel concepts with lessons learned from past experience. While some aspects require further testing, prototy**, and field demonstrations, we estimate that the design will be construction-ready this decade.
△ Less
Submitted 28 February, 2024;
originally announced February 2024.
-
Nucleosynthesis in magnetorotational supernovae: impact of the magnetic field configuration
Authors:
M. Reichert,
M. Bugli,
J. Guilet,
M. Obergaulinger,
M. Á. Aloy,
A. Arcones
Abstract:
The production of heavy elements is one of the main by-products of the explosive end of massive stars. A long sought goal is finding differentiated patterns in the nucleosynthesis yields, which could permit identifying a number of properties of the explosive core. Among them, the traces of the magnetic field topology are particularly important for \emph{extreme} supernova explosions, most likely h…
▽ More
The production of heavy elements is one of the main by-products of the explosive end of massive stars. A long sought goal is finding differentiated patterns in the nucleosynthesis yields, which could permit identifying a number of properties of the explosive core. Among them, the traces of the magnetic field topology are particularly important for \emph{extreme} supernova explosions, most likely hosted by magnetorotational effects. We investigate the nucleosynthesis of five state-of-the-art magnetohydrodynamic models with fast rotation that have been previously calculated in full 3D and that involve an accurate neutrino transport (M1). One of the models does not contain any magnetic field and synthesizes elements around the iron group, in agreement with other CC-SNe models in literature. All other models host a strong magnetic field of the same intensity, but with different topology. For the first time, we investigate the nucleosynthesis of MR-SNe models with a quadrupolar magnetic field and a 90 degree tilted dipole. We obtain a large variety of ejecta compositions reaching from iron nuclei to nuclei up to the third r-process peak. We assess the robustness of our results by considering the impact of different nuclear physics uncertainties such as different nuclear masses, $β^{-}$-decays and $β^{-}$-delayed neutron emission probabilities, neutrino reactions, fission, and a feedback of nuclear energy on the temperature. We find that the qualitative results do not change with different nuclear physics input. The properties of the explosion dynamics and the magnetic field configuration are the dominant factors determining the ejecta composition.
△ Less
Submitted 25 January, 2024;
originally announced January 2024.
-
The Qitai Radio Telescope
Authors:
Na Wang,
Qian Xu,
Jun Ma,
Zhiyong Liu,
Qi Liu,
Hailong Zhang,
Xin Pei,
Maozheng Chen,
Richard N. Manchester,
Kejia Lee,
Xingwu Zheng,
Hans J. Kärcher,
Wulin Zhao,
Hongwei Li,
Dongwei Li,
Martin Süss,
Matthias Reichert,
Zhongyi Zhu,
Congsi Wang,
Mingshuai Li,
Rui Li,
Ning Li,
Guljaina Kazezkhan,
Wenming Yan,
Gang Wu
, et al. (3 additional authors not shown)
Abstract:
This study presents a general outline of the Qitai radio telescope (QTT) project. Qitai, the site of the telescope, is a county of Xinjiang Uygur Autonomous Region of China, located in the east Tianshan Mountains at an elevation of about 1800 m. The QTT is a fully steerable, Gregorian type telescope with a standard parabolic main reflector of 110 m diameter. The QTT has adopted an um-brella suppor…
▽ More
This study presents a general outline of the Qitai radio telescope (QTT) project. Qitai, the site of the telescope, is a county of Xinjiang Uygur Autonomous Region of China, located in the east Tianshan Mountains at an elevation of about 1800 m. The QTT is a fully steerable, Gregorian type telescope with a standard parabolic main reflector of 110 m diameter. The QTT has adopted an um-brella support, homology-symmetric lightweight design. The main reflector is active so that the deformation caused by gravity can be corrected. The structural design aims to ultimately allow high-sensitivity observations from 150 MHz up to 115 GHz. To satisfy the requirements for early scientific goals, the QTT will be equipped with ultra-wideband receivers and large field-of-view mul-ti-beam receivers. A multi-function signal-processing system based on RFSoC and GPU processor chips will be developed. These will enable the QTT to operate in pulsar, spectral line, continuum and Very Long Baseline Interferometer (VLBI) observing modes. Electromagnetic compatibility (EMC) and radio frequency interference (RFI) control techniques are adopted throughout the system design. The QTT will form a world-class observational platform for the detection of low-frequency (nanoHertz) gravitational waves through pulsar timing array (PTA) techniques, pulsar surveys, the discovery of binary black-hole systems, and exploring dark matter and the origin of life in the universe.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
Gravitational Waves from Composite Dark Sectors
Authors:
Roman Pasechnik,
Manuel Reichert,
Francesco Sannino,
Zhi-Wei Wang
Abstract:
We study under which conditions a first-order phase transition in a composite dark sector can yield an observable stochastic gravitational-wave signal. To this end, we employ the Linear-Sigma model featuring $N_f=3,4,5$ flavours and perform a Cornwall-Jackiw-Tomboulis computation also accounting for the effects of the Polyakov loop. The model allows us to investigate the chiral phase transition in…
▽ More
We study under which conditions a first-order phase transition in a composite dark sector can yield an observable stochastic gravitational-wave signal. To this end, we employ the Linear-Sigma model featuring $N_f=3,4,5$ flavours and perform a Cornwall-Jackiw-Tomboulis computation also accounting for the effects of the Polyakov loop. The model allows us to investigate the chiral phase transition in regimes that can mimic QCD-like theories incorporating in addition composite dynamics associated with the effects of confinement-deconfinement phase transition. A further benefit of this approach is that it allows to study the limit in which the effective interactions are weak. We show that strong first-order phase transitions occur for weak effective couplings of the composite sector leading to gravitational-wave signals potentially detectable at future experimental facilities.
△ Less
Submitted 28 September, 2023;
originally announced September 2023.
-
Progress in the Design of the Atacama Large Aperture Submillimeter Telescope
Authors:
Tony Mroczkowski,
Claudia Cicone,
Matthias Reichert,
Patricio Gallardo,
Hans Kaercher,
Richard Hills,
Daniel Bok,
Erik Dahl,
Pierre Dubois-dit-Bonclaude,
Aleksej Kiselev,
Martin Timpe,
Thomas Zimmerer,
Simon Dicker,
Mike Macintosh,
Pamela Klaassen,
Michael Niemack
Abstract:
The Atacama Large Aperture Submillimeter Telescope (AtLAST) aims to be the premier next generation large diameter (50 meter) single dish observatory capable of observations across the millimeter/submillimeter spectrum, from 30~GHz to 1~THz. AtLAST will be sited in Chile at approximately 5100 meters above sea level, high in the Atacama Desert near Llano de Chajnantor. The novel rocking-chair telesc…
▽ More
The Atacama Large Aperture Submillimeter Telescope (AtLAST) aims to be the premier next generation large diameter (50 meter) single dish observatory capable of observations across the millimeter/submillimeter spectrum, from 30~GHz to 1~THz. AtLAST will be sited in Chile at approximately 5100 meters above sea level, high in the Atacama Desert near Llano de Chajnantor. The novel rocking-chair telescope design allows for a unprecedentedly wide field of view (FoV) of 1-2$^\circ$ diameter, a large receiver cabin housing six major instruments, and high structural stability during fast scanning operations (up to $\sim 3^\circ$ per second in azimuth). Here we describe the current status of, and expected outcomes for, the antenna design study, which will be completed in 2024.
△ Less
Submitted 21 August, 2023;
originally announced August 2023.
-
The nuclear reaction network WinNet
Authors:
M. Reichert,
C. Winteler,
O. Korobkin,
A. Arcones,
J. Bliss,
M. Eichler,
U. Frischknecht,
C. Fröhlich,
R. Hirschi,
M. Jacobi,
J. Kuske,
G. Martínez-Pinedo,
D. Martin,
D. Mocelj,
T. Rauscher,
F. -K. Thielemann
Abstract:
We present the state-of-the-art single-zone nuclear reaction network WinNet that is capable of calculating the nucleosynthetic yields of a large variety of astrophysical environments and conditions. This ranges from the calculation of the primordial nucleosynthesis, where only a few nuclei are considered, to the ejecta of neutron star mergers with several thousands of involved nuclei. Here we desc…
▽ More
We present the state-of-the-art single-zone nuclear reaction network WinNet that is capable of calculating the nucleosynthetic yields of a large variety of astrophysical environments and conditions. This ranges from the calculation of the primordial nucleosynthesis, where only a few nuclei are considered, to the ejecta of neutron star mergers with several thousands of involved nuclei. Here we describe the underlying physics and implementation details of the reaction network. We additionally present the numerical implementation of two different integration methods, the implicit Euler method and Gears method along with their advantages and disadvantages. We furthermore describe basic example cases of thermodynamic conditions that we provide together with the network and demonstrate the reliability of the code by using simple test cases. With this publication, WinNet is publicly available and open source at GitHub and Zenodo.
△ Less
Submitted 31 August, 2023; v1 submitted 11 May, 2023;
originally announced May 2023.
-
Nucleosynthesis in jet-driven and jet-associated supernovae
Authors:
M. Obergaulinger,
M. Reichert
Abstract:
In contrast to regular core-collapse supernovae, explosions of rapidly rotating massive stars can develop jets, fast collimated outflows directed along the rotational axis. Depending on the rate of rotation and the magnetic field strength before collapse as well as on possible mechanisms amplifying the magnetic field, such a core can explode magnetorotationally rather than via the standard superno…
▽ More
In contrast to regular core-collapse supernovae, explosions of rapidly rotating massive stars can develop jets, fast collimated outflows directed along the rotational axis. Depending on the rate of rotation and the magnetic field strength before collapse as well as on possible mechanisms amplifying the magnetic field, such a core can explode magnetorotationally rather than via the standard supernova mechanism based on neutrino heating. This scenario can explain the highest kinetic energies observed in the class of hypernovae. On longer time scales, rotation and magnetic fields can play an important role in the engine of long gamma-ray burst powered by proto-magnetars or hyperaccreting black holes in collapsars. Both classes of events are characterized by relativistic jets and winds driven by neutrinos or magnetic spin-down of the central objects. The nucleosynthesis in these events includes the production of Fe group elements, including a possibly enhanced synthesis of radioactive 56Ni leading to high peak luminosities. Additionally, these events are, out of all stellar core-collapse events the ones most likely to allow for the formation of the heaviest nuclei via rapid neutron captures. Increasingly sophisticated numerical simulations indicate that at least a limited r-process is possible, though it remains open how robust this result is against variations in the numerical methods and the initial conditions. If so, supernovae with jets could contribute to the observed galactic chemical enrichment, in particular at early times before neutron-star mergers might be able to set in.
△ Less
Submitted 22 March, 2023;
originally announced March 2023.
-
Gravitational Waves from dark composite dynamics
Authors:
Manuel Reichert,
Zhi-Wei Wang
Abstract:
We discuss the stochastic gravitational-wave spectrum from dark confinement and chiral phase transitions in the early Universe. Specifically, we look at pure Yang-Mills theory for an arbitrary number of colours as well as SU(3) with quarks in different representations. We utilise thermodynamic lattice data and map it to effective models, such as the Polyakov-loop and the PNJL model. This allows us…
▽ More
We discuss the stochastic gravitational-wave spectrum from dark confinement and chiral phase transitions in the early Universe. Specifically, we look at pure Yang-Mills theory for an arbitrary number of colours as well as SU(3) with quarks in different representations. We utilise thermodynamic lattice data and map it to effective models, such as the Polyakov-loop and the PNJL model. This allows us to compute gravitational-wave parameters and the corresponding gravitational-wave signal. We compare the signal to future gravitational-wave observatories such as the Big Bang Observer and DECIGO.
△ Less
Submitted 16 November, 2022;
originally announced November 2022.
-
Core-collapse supernova simulations with reduced nucleosynthesis networks
Authors:
Gerard Navó,
Moritz Reichert,
Martin Obergaulinger,
Almudena Arcones
Abstract:
We present core-collapse supernova simulations including nuclear reaction networks that impact explosion dynamics and nucleosynthesis. The different composition treatment can lead to changes in the neutrino heating in the vicinity of the shock by modifying the number of nucleons and thus the neutrino-opacity of the region. This reduces the ram pressure outside the shock and allows an easier expans…
▽ More
We present core-collapse supernova simulations including nuclear reaction networks that impact explosion dynamics and nucleosynthesis. The different composition treatment can lead to changes in the neutrino heating in the vicinity of the shock by modifying the number of nucleons and thus the neutrino-opacity of the region. This reduces the ram pressure outside the shock and allows an easier expansion. The energy released by the nuclear reactions during collapse also slows down the accretion and aids the shock expansion. In addition, nuclear energy generation in the postshocked matter produces up to $20\%$ more energetic explosions. Nucleosynthesis is affected due to the different dynamic evolution of the explosion. Our results indicate that the energy generation from nuclear reactions helps to sustain late outflows from the vicinity of the proto-neutron star, synthesizing more neutron-rich species. Furthermore, we show that there are systematic discrepancies between the ejecta calculated with in-situ and ex-situ reaction networks. These differences stem from the intrinsic characteristics of evolving the composition in hydrodynamic simulations or calculating it with Lagrangian tracer particles. The mass fractions of some Ca, Ti, Cr, and Fe isotopes are consistently underproduced in postprocessing calculations, leading to different nucleosynthesis paths. Our results suggest that large in-situ nuclear reaction networks are important for a realistic feedback of the energy generation, the neutrino heating, and a more accurate ejecta composition.
△ Less
Submitted 13 June, 2023; v1 submitted 21 October, 2022;
originally announced October 2022.
-
Chemical Evolution of R-process Elements in Stars (CERES). I. Stellar parameters and chemical abundances from Na to Zr
Authors:
Linda Lombardo,
Piercarlo Bonifacio,
Patrick François,
Camilla J Hansen,
Elisabetta Caffau,
Michael Hanke,
{Á}sa Skúladóttir,
Almudena Arcones,
Marius Eichler,
Moritz Reichert,
Athanasios Psaltis,
Andreas J Koch Hansen,
Luca Sbordone
Abstract:
Aims. The Chemical Evolution of R-process Elements in Stars (CERES) project aims to provide a homogeneous analysis of a sample of metal-poor stars ([Fe/H]<-1.5). We present the stellar parameters and the chemical abundances of elements up to Zr for a sample of 52 giant stars.Methods. We relied on a sample of high signal-to-noise UVES spectra. We determined stellar parameters from Gaia photometry a…
▽ More
Aims. The Chemical Evolution of R-process Elements in Stars (CERES) project aims to provide a homogeneous analysis of a sample of metal-poor stars ([Fe/H]<-1.5). We present the stellar parameters and the chemical abundances of elements up to Zr for a sample of 52 giant stars.Methods. We relied on a sample of high signal-to-noise UVES spectra. We determined stellar parameters from Gaia photometry and parallaxes. Chemical abundances were derived using spectrum synthesis and model atmospheres.Results. We determined chemical abundances of 26 species of 18 elements: Na, Mg, Al, Si, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Sr, Y, and Zr. For several stars, we were able to measure both neutral and ionised species, including Si, Sc, Mn, and Zr. We have roughly doubled the number of measurements of Cu for stars at [Fe/H] <= -2.5. The homogeneity of the sample made it possible to highlight the presence of two Zn-rich stars ([Zn/Fe]~+0.7), one r-rich and the other r-poor. We report the existence of two branches in the [Zn/Fe] versus [Ni/Fe] plane and suggest that the high [Zn/Fe] branch is the result of hypernova nucleosynthesis. We discovered two stars with peculiar light neutron-capture abundance patterns: CES1237+1922 (also known as BS 16085-0050), which is ~1 dex underabundant in Sr, Y, and Zr with respect to the other stars in the sample, and CES2250-4057 (also known as HE 2247-4113), which shows a ~1 dex overabundance of Sr with respect to Y and Zr.Conclusions. The high quality of our dataset allowed us to measure hardly detectable ions. This can provide guidance in the development of line formation computations that take deviations from local thermodynamic equilibrium and hydrodynamical effects into account.
△ Less
Submitted 28 June, 2022;
originally announced June 2022.
-
Magnetorotational supernovae: A nucleosynthetic analysis of sophisticated 3D models
Authors:
Moritz Reichert,
Martin Obergaulinger,
Miguel-Angel Aloy,
Michael Gabler,
Almudena Arcones,
Friedrich-Karl Thielemann
Abstract:
Magnetorotational supernovae are a rare type of core-collapse supernovae where the magnetic field and rotation play a central role in the dynamics of the explosion. We present the post-processed nucleosynthesis of state-of-the-art neutrino-MHD supernova models that follow the post explosion evolution for few seconds. We find three different dynamical mechanisms to produce heavy r-process elements:…
▽ More
Magnetorotational supernovae are a rare type of core-collapse supernovae where the magnetic field and rotation play a central role in the dynamics of the explosion. We present the post-processed nucleosynthesis of state-of-the-art neutrino-MHD supernova models that follow the post explosion evolution for few seconds. We find three different dynamical mechanisms to produce heavy r-process elements: i) a prompt ejection of matter right after core bounce, ii) neutron-rich matter that is ejected at late times due to a reconfiguration of the protoneutronstar shape, iii) small amount of mass ejected with high entropies in the center of the jet. We investigate total ejecta yields, including the ones of unstable nuclei such as $^{26}$Al, $^{44}$Ti, $^{56}$Ni, and $^{60}$Fe. The obtained $^{56}$Ni masses vary between $0.01 - 1\,\mathrm{M_\odot}$. The latter maximum is compatible with hypernova observations. Furthermore, all of our models synthesize Zn masses in agreement with observations of old metal-poor stars. We calculate simplified light curves to investigate whether our models can be candidates for superluminous supernovae. The peak luminosities obtained from taking into account only nuclear heating reach up to a few $\sim 10^{43} \,\mathrm{erg\,s^{-1}}$. Under certain conditions, we find a significant impact of the $^{66}$Ni decay chain that can raise the peak luminosity up to $\sim 38\%$ compared to models including only the $^{56}$Ni decay chain. This work reinforces the theoretical evidence on the critical role of magnetorotational supernovae to understand the occurrence of hypernovae, superluminous supernovae, and the synthesis of heavy elements.
△ Less
Submitted 16 November, 2022; v1 submitted 23 June, 2022;
originally announced June 2022.
-
Dark Confinement and Chiral Phase Transitions: Gravitational Waves vs Matter Representations
Authors:
Manuel Reichert,
Francesco Sannino,
Zhi-Wei Wang,
Chen Zhang
Abstract:
We study the gravitational-wave signal stemming from strongly coupled models featuring both, dark chiral and confinement phase transitions. We therefore identify strongly coupled theories that can feature a first-order phase transition. Employing the Polyakov-Nambu-Jona-Lasinio model, we focus our attention on SU(3) Yang-Mills theories featuring fermions in fundamental, adjoint, and two-index symm…
▽ More
We study the gravitational-wave signal stemming from strongly coupled models featuring both, dark chiral and confinement phase transitions. We therefore identify strongly coupled theories that can feature a first-order phase transition. Employing the Polyakov-Nambu-Jona-Lasinio model, we focus our attention on SU(3) Yang-Mills theories featuring fermions in fundamental, adjoint, and two-index symmetric representations. We discover that for the gravitational-wave signals analysis, there are significant differences between the various representations. Interestingly we also observe that the two-index symmetric representation leads to the strongest first-order phase transition and therefore to a higher chance of being detected by the Big Bang Observer experiment. Our study of the confinement and chiral phase transitions is further applicable to extensions of the Standard Model featuring composite dynamics.
△ Less
Submitted 4 January, 2022; v1 submitted 23 September, 2021;
originally announced September 2021.
-
Post-explosion evolution of core-collapse supernovae
Authors:
M. Witt,
A. Psaltis,
H. Yasin,
C. Horn,
M. Reichert,
T. Kuroda,
M. Obergaulinger,
S. M. Couch,
A. Arcones
Abstract:
We investigate the post-explosion phase in core-collapse supernovae with 2D hydrodynamical simulations and a simple neutrino treatment. The latter allows us to perform 46 simulations and follow the evolution of the 32 successful explosions during several seconds. We present a broad study based on three progenitors (11.2 $M_\odot$, 15 $M_\odot$, and 27 $M_\odot$), different neutrino-heating efficie…
▽ More
We investigate the post-explosion phase in core-collapse supernovae with 2D hydrodynamical simulations and a simple neutrino treatment. The latter allows us to perform 46 simulations and follow the evolution of the 32 successful explosions during several seconds. We present a broad study based on three progenitors (11.2 $M_\odot$, 15 $M_\odot$, and 27 $M_\odot$), different neutrino-heating efficiencies, and various rotation rates. We show that the first seconds after shock revival determine the final explosion energy, remnant mass, and properties of ejected matter. Our results suggest that a continued mass accretion increases the explosion energy even at late times. We link the late-time mass accretion to initial conditions such as rotation strength and shock deformation at explosion time. Only some of our simulations develop a neutrino-driven wind that survives for several seconds. This indicates that neutrino-driven winds are not a standard feature expected after every successful explosion. Even if our neutrino treatment is simple, we estimate the nucleosynthesis of the exploding models for the 15 $M_\odot$ progenitor after correcting the neutrino energies and luminosities to get a more realistic electron fraction.
△ Less
Submitted 1 July, 2021;
originally announced July 2021.
-
Evolution of neutron capture elements in dwarf galaxies
Authors:
Marta Molero,
Donatella Romano,
Moritz Reichert,
Francesca Matteucci,
Almudena Arcones,
Gabriele Cescutti,
Paolo Simonetti,
Camilla Juul Hansen,
Gustavo A. Lanfranchi
Abstract:
We study the evolution of Eu and Ba abundances in local group dwarf spheroidal and ultra faint dwarf galaxies by means of detailed chemical evolution models and compare our results with new sets of homogeneous abundances. The adopted models include gas infall and outflow and have been previously tested. We investigate several production scenarios for r-process elements: merging neutron stars and m…
▽ More
We study the evolution of Eu and Ba abundances in local group dwarf spheroidal and ultra faint dwarf galaxies by means of detailed chemical evolution models and compare our results with new sets of homogeneous abundances. The adopted models include gas infall and outflow and have been previously tested. We investigate several production scenarios for r-process elements: merging neutron stars and magneto-rotational driven supernovae. Production of Ba through the main s-process acting in low- and intermediate- mass stars is considered as well. We also test different sets of nucleosynthesis yields. For merging neutron stars we adopt either a constant and short delay time for merging or a delay time distribution function. Our simulations show that: i) if r-process elements are produced only by a quick source, it is possible to reproduce the [Eu/Fe] vs [Fe/H], but those models fail in reproducing the [Ba/Fe] vs [Fe/H]. ii) If r-process elements are produced only with longer delays the opposite happens. iii) If both a quick source and a delayed one are adopted, such as magneto-rotational driven supernovae and merging neutron stars with a delay time distribution, the [Eu/Fe] abundance pattern is successfully reproduced, but models still fail in reproducing the [Ba/Fe]. iv) On the other hand, the characteristic abundances of Reticulum II can be reproduced only if both the Eu and the r-process fraction of Ba are produced on short and constant time delays during a single merging event. We discuss also other possible interpretations, including an inhomogeneous mixing of gas which might characterize this galaxy.
△ Less
Submitted 14 May, 2021;
originally announced May 2021.
-
Extreme r-process enhanced stars at high metallicity in Fornax
Authors:
M. Reichert,
C. J. Hansen,
A. Arcones
Abstract:
We present and discuss three extremely r-process enhanced stars located in the massive dwarf spheriodal galaxy Fornax. These stars are very unique with an extreme Eu enrichment ($1.25\le \mathrm{[Eu/Fe]} \le 1.45$) at high metallicities ($-1.3 \le \mathrm{[Fe/H]} \le -0.8$). They have the largest Eu abundances ever observed in a dwarf galaxy opening new opportunities to further understand the orig…
▽ More
We present and discuss three extremely r-process enhanced stars located in the massive dwarf spheriodal galaxy Fornax. These stars are very unique with an extreme Eu enrichment ($1.25\le \mathrm{[Eu/Fe]} \le 1.45$) at high metallicities ($-1.3 \le \mathrm{[Fe/H]} \le -0.8$). They have the largest Eu abundances ever observed in a dwarf galaxy opening new opportunities to further understand the origin of heavy elements formed by the r-process. We derive stellar abundances of Co, Zr, La, Ce, Pr, Nd, Er, and Lu using 1-dimensional, local thermodynamic equilibrium (LTE) codes and model atmospheres in conjunction with state-of-the art yield predictions. We derive Zr in the largest sample of stars (105) known to date in a dwarf galaxy. Accurate stellar abundances combined with a careful assessment of the yield predictions have revealed three metal-rich stars in Fornax showing a pure r-process pattern. We define a new class of stars, namely Eu-stars, as r-II stars (i.e., [Eu/Fe]$>1$) at high metallicities (i.e., $\mathrm{[Fe/H]}\gtrsim -1.5$). The stellar abundance pattern contains Lu, observed for the first time in a dwarf galaxy, and reveals that a late burst of star formation has facilitated extreme r-process enhancement late in the galaxy's history ($<4$\,Gyr ago). Due to the large uncertainties associated with the nuclear physics input in the yield predictions, we cannot yet determine the r-process site leading to the three Eu-stars in Fornax. Our results demonstrate that extremely r-rich stars are not only associated with ultra faint low-mass dwarf galaxies, but can be born also in massive dwarf galaxies.
△ Less
Submitted 21 March, 2021; v1 submitted 16 February, 2021;
originally announced February 2021.
-
Testing the dark SU(N) Yang-Mills theory Confined Landscape: From the Lattice to Gravitational Waves
Authors:
Wei-Chih Huang,
Manuel Reichert,
Francesco Sannino,
Zhi-Wei Wang
Abstract:
We pave the way for future gravitational-wave detection experiments, such as the Big Bang Observer and DECIGO, to constrain dark sectors made of SU(N) Yang-Mills confined theories. We go beyond the state-of-the-art by combining first principle lattice results and effective field theory approaches to infer essential information about the non-perturbative dark deconfinement phase transition driving…
▽ More
We pave the way for future gravitational-wave detection experiments, such as the Big Bang Observer and DECIGO, to constrain dark sectors made of SU(N) Yang-Mills confined theories. We go beyond the state-of-the-art by combining first principle lattice results and effective field theory approaches to infer essential information about the non-perturbative dark deconfinement phase transition driving the generation of gravitational-waves in the early universe, such as the order, duration and energy budget of the phase transition which are essential in establishing the strength of the resulting gravitational-wave signal.
△ Less
Submitted 20 August, 2021; v1 submitted 21 December, 2020;
originally announced December 2020.
-
Nucleosynthesis in magneto-rotational supernovae
Authors:
Moritz Reichert,
Martin Obergaulinger,
Marius Eichler,
Miguel-Ángel Aloy,
Almudena Arcones
Abstract:
We present the nucleosynthesis of magneto-rotational supernovae (MR-SNe) including neutrino-driven and magneto-rotational-driven ejecta based, for the first time, on 2D simulations with accurate neutrino transport. The models analysed here have different rotation and magnetic fields, allowing us to explore the impact of these two key ingredients. The accurate neutrino transport of the simulations…
▽ More
We present the nucleosynthesis of magneto-rotational supernovae (MR-SNe) including neutrino-driven and magneto-rotational-driven ejecta based, for the first time, on 2D simulations with accurate neutrino transport. The models analysed here have different rotation and magnetic fields, allowing us to explore the impact of these two key ingredients. The accurate neutrino transport of the simulations is critical to analyse the slightly neutron-rich and proton-rich ejecta that are similar to the, also neutrino-driven, ejecta in standard supernovae. In the model with strong magnetic field, the r-process produces heavy elements up to the third r-process peak ($A\sim 195$), in agreement with previous works. This model presents a jet-like explosion with proton-rich jets surrounded by neutron-rich material where the r-process occurs. We have estimated a lower limit for $^{56}$Ni of $2.5\times10^{-2} M_\odot$, which is still well below the expected hypernova value. Longer simulations including the accretion disc evolution are required to get a final prediction. In addition, we have found that the late evolution is critical in a model with weak magnetic field in which late-ejected neutron-rich matter produces elements up to the second r-process peak. Even if we cannot yet provide conclusions for hypernova nucleosynthesis, our results agree with observations of old stars and radioactive isotopes in supernova remnants. This makes MR-SNe a good additional scenario to neutron star mergers for the synthesis of heavy elements and brings us closer to understand their origin and the role of MR-SNe in the early Galaxy nucleosynthesis.
△ Less
Submitted 20 January, 2021; v1 submitted 5 October, 2020;
originally announced October 2020.
-
Universal gravitational-wave signatures from heavy new physics in the electroweak sector
Authors:
Astrid Eichhorn,
Johannes Lumma,
Jan M. Pawlowski,
Manuel Reichert,
Masatoshi Yamada
Abstract:
We calculate the gravitational-wave spectra produced by the electroweak phase transition with TeV-scale Beyond-Standard-Model physics in the early universe. Our study captures the effect of quantum and thermal fluctuations within a non-perturbative framework. We discover a universal relation between the mean bubble separation and the strength parameter of the phase transition, which holds for a wi…
▽ More
We calculate the gravitational-wave spectra produced by the electroweak phase transition with TeV-scale Beyond-Standard-Model physics in the early universe. Our study captures the effect of quantum and thermal fluctuations within a non-perturbative framework. We discover a universal relation between the mean bubble separation and the strength parameter of the phase transition, which holds for a wide range of new-physics contributions.
The ramifications of this result are three-fold: First, they constrain the gravitational-wave spectra resulting from heavy (TeV-scale) new physics. Second, they contribute to distinguishing heavy from light new physics directly from the gravitational-wave signature. Third, they suggest that a concerted effort of gravitational-wave observations together with collider experiments could be required to distinguish between different models of heavy new physics.
△ Less
Submitted 5 May, 2021; v1 submitted 30 September, 2020;
originally announced October 2020.
-
Neutron-capture elements in dwarf galaxies III: A homogenized analysis of 13 dwarf spheroidal and ultra-faint galaxies
Authors:
Moritz Reichert,
Camilla J. Hansen,
Michael Hanke,
Ása Skúladóttir,
Almudena Arcones,
Eva K. Grebel
Abstract:
We present a large homogeneous set of stellar parameters and abundances across a broad range of metallicities, involving $13$ classical dwarf spheroidal (dSph) and ultra-faint dSph (UFD) galaxies. In total this study includes $380$ stars in Fornax, Sagittarius, Sculptor, Sextans, Carina, Ursa Minor, Draco, Reticulum II, Bootes I, Ursa Major II, Leo I, Segue I, and Triangulum II. This sample repres…
▽ More
We present a large homogeneous set of stellar parameters and abundances across a broad range of metallicities, involving $13$ classical dwarf spheroidal (dSph) and ultra-faint dSph (UFD) galaxies. In total this study includes $380$ stars in Fornax, Sagittarius, Sculptor, Sextans, Carina, Ursa Minor, Draco, Reticulum II, Bootes I, Ursa Major II, Leo I, Segue I, and Triangulum II. This sample represents the largest, homogeneous, high-resolution study of dSph galaxies to date. With our homogeneously derived catalog, we are able to search for similar and deviating trends across different galaxies. We investigate the mass dependence of the individual systems on the production of $α$-elements, but also try to shed light on the long-standing puzzle of the dominant production site of r-process elements. We use data from the Keck observatory archive and the ESO reduced archive to reanalyze stars from these $13$ dSph galaxies. We automatize the step of obtaining stellar parameters, but run a full spectrum synthesis to derive all abundances except for iron. The homogenized set of abundances yielded the unique possibility to derive a relation between the onset of type Ia supernovae and the stellar mass of the galaxy. Furthermore, we derived a formula to estimate the evolution of $α$-elements. Placing all abundances consistently on the same scale is crucial to answer questions about the chemical history of galaxies. By homogeneously analysing Ba and Eu in the 13 systems, we have traced the onset of the s-process and found it to increase with metallicity as a function of the galaxy's stellar mass. Moreover, the r-process material correlates with the $α$-elements indicating some co-production of these, which in turn would point towards rare core-collapse supernovae rather than binary neutron star mergers as host for the r-process at low [Fe/H] in the investigated dSph systems.
△ Less
Submitted 2 September, 2020; v1 submitted 2 April, 2020;
originally announced April 2020.
-
An empirical metallicity tracer in CEMP and C-normal stars
Authors:
D. Singh,
C. J. Hansen,
J. S. Byrgesen,
M. Reichert,
H. M. Reggiani
Abstract:
Deriving the metallicity, [Fe/H], in low-resolution spectra of carbon-enhanced metal-poor (CEMP) stars is a tedious task that, owing to the large number of line blends, often leads to uncertainties on [Fe/H] exceeding 0.25dex. The CEMP stars increase in number with decreasing [Fe/H] and some of these are known to be bona fide second generation halo stars. Hence, knowing their [Fe/H] is important f…
▽ More
Deriving the metallicity, [Fe/H], in low-resolution spectra of carbon-enhanced metal-poor (CEMP) stars is a tedious task that, owing to the large number of line blends, often leads to uncertainties on [Fe/H] exceeding 0.25dex. The CEMP stars increase in number with decreasing [Fe/H] and some of these are known to be bona fide second generation halo stars. Hence, knowing their [Fe/H] is important for tracing the formation and chemical evolution of the Galaxy. Here, we aim to improve the [Fe/H] measurements in low-resolution spectra by avoiding issues related to blends. We improve our chemical tagging in such spectra at low metallicities. We developed an empirical way of deriving [Fe/H] in CEMP (and C-normal) stars that relates the equivalent width (EW) of strong lines, which remain detectable in lower-resolution, metal-poor spectra. The best [Fe/H] tracers are found to be Cr I and Ni I, which both show strong transitions in spectral regions that are free of molecular bands (between ~5200-6800A, a region accessible to most surveys). We derive different relations for dwarfs and giants. The relations are valid in the ranges ~-3<[Fe/H]<-0.5 and 10<EW<800mA (Cr) or [Fe/H]>-3.2 and EW>5mA (Ni), depending on the element and line as well as the stellar evolutionary stage. The empirical relations are valid for both CEMP and C-normal stars and have been proven to be accurate tracers in a sample of ~400 stars (mainly giants). The metallicities are accurate to within ~0.2 depending on the sample and resolution, and the empirical relations are robust to within 0.05-0.1dex. Our relations will improve the metallicity determination in future surveys, which will encounter a large number of CEMP stars, and will greatly speed up the process of determining [Fe/H] as the EWs only need to be measured in two or three lines in relatively clean regions compared to dealing with numerous blended Fe lines. Abrigded.
△ Less
Submitted 8 January, 2020;
originally announced January 2020.
-
Unusual neutron-capture nucleosynthesis in a carbon-rich Galactic bulge star
Authors:
A. Koch,
M. Reichert,
C. J. Hansen,
M. Hampel,
R. J. Stancliffe,
A. Karakas,
A. Arcones
Abstract:
Metal-poor stars in the Galactic halo often show strong enhancements in carbon and/or neutron-capture elements. However, the Galactic bulge is notable for its paucity of carbon-enhanced metal-poor (CEMP) and/or CH-stars, with only two such objects known to date. This begs the question whether the processes that produced their abundance distribution were governed by a comparable nucleosynthesis in…
▽ More
Metal-poor stars in the Galactic halo often show strong enhancements in carbon and/or neutron-capture elements. However, the Galactic bulge is notable for its paucity of carbon-enhanced metal-poor (CEMP) and/or CH-stars, with only two such objects known to date. This begs the question whether the processes that produced their abundance distribution were governed by a comparable nucleosynthesis in similar stellar sites as for their more numerous counterparts in the halo. Recently, two contenders of such stars were discovered in the bulge, at [Fe/H] = $-1.5$ and $-$2.5 dex, both of which show enhancements in [C/Fe] of 0.4 and 1.4 dex, [Ba/Fe] in excess of 1.3 dex, and also elevated nitrogen. The more metal-poor of the stars is matched by standard $s$-process nucleosynthesis in low-mass Asymptotic Giant Branch (AGB) polluters. The other star shows an abnormally high [Rb/Fe] ratio. Here, we investigate the origin of the abundance peculiarities in the Rb-rich star by new, detailed measurements of heavy element abundances and by comparing the chemical element ratios of 36 species to models of neutron-capture nucleosynthesis. The $i$-process with intermediate neutron densities between those of the $s$- and $r$-processes has been previously found to provide good matches of CEMP stars with enhancements in both $r$- and $s$-process elements, rather than invoking a superposition of yields from the respective individual processes. However, the peculiar bulge star is incompatible with a pure $i$-process from a single ingestion event. Instead, it can, statistically, be better reproduced by models accounting for two proton ingestion events, or by an $i$-process component in combination with $s$-process nucleosynthesis in low-to-intermediate mass AGB stars, indicating multiple polluters. [abridged]
△ Less
Submitted 18 December, 2018;
originally announced December 2018.
-
Neutron Star Mergers Might not be the Only Source of r-Process Elements in the Milky Way
Authors:
Benoit Côté,
Marius Eichler,
Almudena Arcones,
Camilla J. Hansen,
Paolo Simonetti,
Anna Frebel,
Chris L. Fryer,
Marco Pignatari,
Moritz Reichert,
Krzysztof Belczynski,
Francesca Matteucci
Abstract:
Probing the origin of r-process elements in the universe represents a multi-disciplinary challenge. We review the observational evidence that probe the properties of r-process sites, and address them using galactic chemical evolution simulations, binary population synthesis models, and nucleosynthesis calculations. Our motivation is to define which astrophysical sites have significantly contribute…
▽ More
Probing the origin of r-process elements in the universe represents a multi-disciplinary challenge. We review the observational evidence that probe the properties of r-process sites, and address them using galactic chemical evolution simulations, binary population synthesis models, and nucleosynthesis calculations. Our motivation is to define which astrophysical sites have significantly contributed to the total mass of r-process elements present in our Galaxy. We found discrepancies with the neutron star (NS-NS) merger scenario. Assuming they are the only site, the decreasing trend of [Eu/Fe] at [Fe/H]\,$>-1$ in the disk of the Milky Way cannot be reproduced while accounting for the delay-time distribution (DTD) of coalescence times ($\propto~t^{-1}$) derived from short gamma-ray bursts and population synthesis models. Steeper DTD functions ($\propto~t^{-1.5}$) or power laws combined with a strong burst of mergers before the onset of Type~Ia supernovae can reproduce the [Eu/Fe] trend, but this scenario is inconsistent with the similar fraction of short gamma-ray bursts and Type~Ia supernovae occurring in early-type galaxies, and reduces the probability of detecting GW170817 in an early-type galaxy. One solution is to assume an extra production site of Eu that would be active in the early universe, but would fade away with increasing metallicity. If this is correct, this extra site could be responsible for roughly 50% of the Eu production in the early universe, before the onset of Type~Ia supernovae. Rare classes of supernovae could be this additional r-process source, but hydrodynamic simulations still need to ensure the conditions for a robust r-process pattern.
△ Less
Submitted 4 March, 2019; v1 submitted 10 September, 2018;
originally announced September 2018.
