Showing 1–24 of 24 results for author: Pallot, D

SoFiA 2 -- An automated, parallel HI source finding pipeline for the WALLABY survey

Authors: T. Westmeier, S. Kitaeff, D. Pallot, P. Serra, J. M. van der Hulst, R. J. Jurek, A. Elagali, B. -Q. For, D. Kleiner, B. S. Koribalski, K. Lee-Waddell, J. R. Mould, T. N. Reynolds, J. Rhee, L. Staveley-Smith

Abstract: We present SoFiA 2, the fully automated 3D source finding pipeline for the WALLABY extragalactic HI survey with the Australian SKA Pathfinder (ASKAP). SoFiA 2 is a reimplementation of parts of the original SoFiA pipeline in the C programming language and makes use of OpenMP for multi-threading of the most time-critical algorithms. In addition, we have developed a parallel framework called SoFiA-X… ▽ More We present SoFiA 2, the fully automated 3D source finding pipeline for the WALLABY extragalactic HI survey with the Australian SKA Pathfinder (ASKAP). SoFiA 2 is a reimplementation of parts of the original SoFiA pipeline in the C programming language and makes use of OpenMP for multi-threading of the most time-critical algorithms. In addition, we have developed a parallel framework called SoFiA-X that allows the processing of large data cubes to be split across multiple computing nodes. As a result of these efforts, SoFiA 2 is substantially faster and comes with a much reduced memory footprint compared to its predecessor, thus allowing the large WALLABY data volumes of hundreds of gigabytes of imaging data per epoch to be processed in real-time. The source code has been made publicly available to the entire community under an open-source licence. Performance tests using mock galaxies injected into genuine ASKAP data suggest that in the absence of significant imaging artefacts SoFiA 2 is capable of achieving near-100% completeness and reliability above an integrated signal-to-noise ratio of about 5-6. We also demonstrate that SoFiA 2 generally recovers the location, integrated flux and w20 line width of galaxies with high accuracy. Other parameters, including the peak flux density and w50 line width, are more strongly biased due to the influence of the noise on the measurement. In addition, very faint galaxies below an integrated signal-to-noise ratio of about 10 may get broken up into multiple components, thus requiring a strategy to identify fragmented sources and ensure that they do not affect the integrity of any scientific analysis based on the SoFiA 2 output. △ Less

Submitted 29 June, 2021; originally announced June 2021.

Comments: 16 pages, 10 figures, 1 table, accepted for publication in MNRAS

Calibration database for the Murchison Widefield Array All-Sky Virtual Observatory

Authors: M. Sokolowski, C. H. Jordan, G. Sleap, A. Williams, R. B. Wayth, M. Walker, D. Pallot, A. Offringa, N. Hurley-Walker, T. M. O. Franzen, M. Johnston-Hollitt, D. L. Kaplan, D. Kenney, S. J. Tingay

Abstract: We present a calibration component for the Murchison Widefield Array All-Sky Virtual Observatory (MWA ASVO) utilising a newly developed PostgreSQL database of calibration solutions. Since its inauguration in 2013, the MWA has recorded over thirty-four petabytes of data archived at the Pawsey Supercomputing Centre. According to the MWA Data Access policy, data become publicly available eighteen mon… ▽ More We present a calibration component for the Murchison Widefield Array All-Sky Virtual Observatory (MWA ASVO) utilising a newly developed PostgreSQL database of calibration solutions. Since its inauguration in 2013, the MWA has recorded over thirty-four petabytes of data archived at the Pawsey Supercomputing Centre. According to the MWA Data Access policy, data become publicly available eighteen months after collection. Therefore, most of the archival data are now available to the public. Access to public data was provided in 2017 via the MWA ASVO interface, which allowed researchers worldwide to download MWA uncalibrated data in standard radio astronomy data formats (CASA measurement sets or UV FITS files). The addition of the MWA ASVO calibration feature opens a new, powerful avenue for researchers without a detailed knowledge of the MWA telescope and data processing to download calibrated visibility data and create images using standard radio-astronomy software packages. In order to populate the database with calibration solutions from the last six years we developed fully automated pipelines. A near-real-time pipeline has been used to process new calibration observations as soon as they are collected and upload calibration solutions to the database, which enables monitoring of the interferometric performance of the telescope. Based on this database we present an analysis of the stability of the MWA calibration solutions over long time intervals. △ Less

Submitted 5 May, 2020; originally announced May 2020.

Comments: 12 pages, 9 figures, Accepted for publication in PASA

First Season MWA Phase II EoR Power Spectrum Results at Redshift 7

Authors: W. Li, J. C. Pober, N. Barry, B. J. Hazelton, M. F. Morales, C. M. Trott, A. Lanman, M. Wilensky, I. Sullivan, A. P. Beardsley, T. Booler, J. D. Bowman, R. Byrne, B. Crosse, D. Emrich, T. M. O. Franzen, K. Hasegawa, L. Horsley, M. Johnston-Hollitt, D. C. Jacobs, C. H. Jordan, R. C. Joseph, T. Kaneuji, D. L. Kaplan, D. Kenney , et al. (22 additional authors not shown)

Abstract: The compact configuration of Phase II of the Murchison Widefield Array (MWA) consists of both a redundant subarray and pseudo-random baselines, offering unique opportunities to perform sky-model and redundant interferometric calibration. The highly redundant hexagonal cores give improved power spectrum sensitivity. In this paper, we present the analysis of nearly 40 hours of data targeting one of… ▽ More The compact configuration of Phase II of the Murchison Widefield Array (MWA) consists of both a redundant subarray and pseudo-random baselines, offering unique opportunities to perform sky-model and redundant interferometric calibration. The highly redundant hexagonal cores give improved power spectrum sensitivity. In this paper, we present the analysis of nearly 40 hours of data targeting one of the MWA's EoR fields observed in 2016. We use both improved analysis techniques presented in Barry et al. (2019) as well as several additional techniques developed for this work, including data quality control methods and interferometric calibration approaches. We show the EoR power spectrum limits at redshift 6.5, 6.8 and 7.1 based on our deep analysis on this 40-hour data set. These limits span a range in $k$ space of $0.18$ $h$ $\mathrm{Mpc^{-1}}$ $<k<1.6$ $h$ $\mathrm{Mpc^{-1}}$, with a lowest measurement of $Δ^2\leqslant2.39\times 10^3$ $\mathrm{mK}^2$ at $k=0.59$ $h$ $\mathrm{Mpc^{-1}}$ and $z=6.5$. △ Less

Submitted 20 December, 2019; v1 submitted 22 November, 2019; originally announced November 2019.

Comments: 26 pages, 15 figures, 3 tables. Updated acknowledgements. Published in ApJ

Journal ref: ApJ (2019) 887 141

Science with the Murchison Widefield Array: Phase I Results and Phase II Opportunities

Authors: A. P. Beardsley, M. Johnston-Hollitt, C. M. Trott, J. C. Pober, J. Morgan, D. Oberoi, D. L. Kaplan, C. R. Lynch, G. E. Anderson, P. I. McCauley, S. Croft, C. W. James, O. I. Wong, C. D. Tremblay, R. P. Norris, I. H. Cairns, C. J. Lonsdale, P. J. Hancock, B. M. Gaensler, N. D. R. Bhat, W. Li, N. Hurley-Walker, J. R. Callingham, N. Seymour, S. Yoshiura , et al. (34 additional authors not shown)

Abstract: The Murchison Widefield Array (MWA) is an open access telescope dedicated to studying the low frequency (80$-$300 MHz) southern sky. Since beginning operations in mid 2013, the MWA has opened a new observational window in the southern hemisphere enabling many science areas. The driving science objectives of the original design were to observe 21\,cm radiation from the Epoch of Reionisation (EoR),… ▽ More The Murchison Widefield Array (MWA) is an open access telescope dedicated to studying the low frequency (80$-$300 MHz) southern sky. Since beginning operations in mid 2013, the MWA has opened a new observational window in the southern hemisphere enabling many science areas. The driving science objectives of the original design were to observe 21\,cm radiation from the Epoch of Reionisation (EoR), explore the radio time domain, perform Galactic and extragalactic surveys, and monitor solar, heliospheric, and ionospheric phenomena. All together 60$+$ programs recorded 20,000 hours producing 146 papers to date. In 2016 the telescope underwent a major upgrade resulting in alternating compact and extended configurations. Other upgrades, including digital back-ends and a rapid-response triggering system, have been developed since the original array was commissioned. In this paper we review the major results from the prior operation of the MWA, and then discuss the new science paths enabled by the improved capabilities. We group these science opportunities by the four original science themes, but also include ideas for directions outside these categories. △ Less

Submitted 7 October, 2019; originally announced October 2019.

Comments: 38 pages, 12 figures, accepted for publication in PASA

A VOEvent based automatic trigger system for the Murchison Widefield Array

Authors: P. J. Hancock, G. E. Anderson, A. Williams, M. Sokolowski, S. E. Tremblay, A. Rowlinson, B. Crosse, B. W. Meyers, C. R. Lynch, A. Zic, A. P. Beardsley, D. Emrich, T. M. O. Franzen, L. Horsley, M. Johnston-Hollitt, D. L. Kaplan, D. Kenney, M. F. Morales, D. Pallot, K. Steele, S. J. Tingay, C. M. Trott, M. Walker, R. B. Wayth, C. Wu

Abstract: The Murchison Widefield Array (MWA) is an electronically steered low frequency ($<300$\,MHz) radio interferometer, with a `slew' time less than 8seconds. Low frequency ($\sim 100$\,MHz) radio telescopes are ideally suited for rapid-response follow-up of transients due to their large field of view, the inverted spectrum of coherent emission, and the fact that the dispersion delay between a 1GHz and… ▽ More The Murchison Widefield Array (MWA) is an electronically steered low frequency ($<300$\,MHz) radio interferometer, with a `slew' time less than 8seconds. Low frequency ($\sim 100$\,MHz) radio telescopes are ideally suited for rapid-response follow-up of transients due to their large field of view, the inverted spectrum of coherent emission, and the fact that the dispersion delay between a 1GHz and 100MHz pulse is on the order of $1-10$\,min for dispersion measures of $100-2000$\,pc/cm$^3$. The MWA has previously been used to provide fast follow up for transient events including gamma-ray bursts, fast radio bursts, and gravitational waves, using systems that respond to gamma-ray coordinates network (GCN) packet-based notifications. We describe a system for automatically triggering MWA observations of such events, based on VOEvent triggers, which is more flexible, capable, and accurate than previous systems. The system can respond to external multi-messenger triggers, which makes it well-suited to searching for prompt coherent radio emission from gamma-ray bursts, the study of fast radio bursts and gravitational waves, single pulse studies of pulsars, and rapid follow-up of high-energy superflares from flare stars. The new triggering system has the capability to trigger observations in both the regular correlator mode (limited to $\geq 0.5$\,s integrations) or using the Voltage Capture System (VCS, $0.1$\,ms integration) of the MWA, and represents a new mode of operation for the MWA. The upgraded standard correlator triggering capability has been in use since MWA observing semester 2018B (July-Dec 2018), and the VCS and buffered mode triggers will become available for observing in a future semester. △ Less

Submitted 6 October, 2019; originally announced October 2019.

Comments: 14 pages, 5 figures, accepted for publication in PASA

A high time resolution study of the millisecond pulsar J2241-5236 at frequencies below 300 MHz

Authors: D. Kaur, N. D. R. Bhat, S. E. Tremblay, R. M. Shannon, S. J. McSweeney, S. M. Ord, A. P. Beardsley, B. Crosse, D. Emrich, T. M. O. Franzen, L. Horsley, M. Johnston-Hollitt, D. L. Kaplan, D. Kenney, M. F. Morales, D. Pallot, K. Steele, S. J. Tingay, C. M. Trott, M. Walker, R. B. Wayth1, A. Williams, C. Wu

Abstract: One of the major challenges for pulsar timing array (PTA) experiments is the mitigation of the effects of the turbulent interstellar medium (ISM) from timing data. These can potentially lead to measurable delays and/or distortions in the pulse profiles and scale strongly with the inverse of the radio frequency. Low-frequency observations are therefore highly appealing for characterizing them. Howe… ▽ More One of the major challenges for pulsar timing array (PTA) experiments is the mitigation of the effects of the turbulent interstellar medium (ISM) from timing data. These can potentially lead to measurable delays and/or distortions in the pulse profiles and scale strongly with the inverse of the radio frequency. Low-frequency observations are therefore highly appealing for characterizing them. However, in order to achieve the necessary time resolution to resolve profile features of short-period millisecond pulsars, phase-coherent de-dispersion is essential, especially at frequencies below $300$ MHz. We present the lowest-frequency ($80$-$220$ MHz), coherently de-dispersed detections of one of the most promising pulsars for current and future PTAs, PSR J2241$-$5236, using our new beam-former software for the MWA's voltage capture system (VCS), which reconstructs the time series at a much higher time resolution of $\sim 1 μ$s by re-synthesizing the recorded voltage data at $10$-kHz/$100$-$μ$s native resolutions. Our data reveal a dual-precursor type feature in the pulse profile that is either faint or absent in high-frequency observations from Parkes. The resultant high-fidelity detections have enabled dispersion measure (DM) determinations with very high precision, of the order of $(2$-$6)\times10^{-6}$ $\rm pc\,cm^{-3}$, owing to the microsecond level timing achievable for this pulsar at the MWA's low frequencies. This underscores the usefulness of low-frequency observations for probing the ISM toward PTA pulsars and informing optimal observing strategies for PTA experiments. △ Less

Submitted 21 July, 2019; originally announced July 2019.

Comments: 09 pages, 4 figures, 2 tables

Improved Techniques for the Surveillance of the Near Earth Space Environment with the Murchison Widefield Array

Authors: Brendan Hennessy, Steven Tingay, Paul Hancock, Robert Young, Steven Tremblay, Randall B. Wayth, John Morgan, Sammy McSweeney, Brian Crosse, Melanie Johnston-Hollitt, David L. Kaplan, Dave Pallot, Mia Walker

Abstract: In this paper we demonstrate improved techniques to extend coherent processing intervals for passive radar processing, with the Murchison Widefield Array. Specifically, we apply a two stage linear range and Doppler migration compensation by utilising Keystone Formatting and a recent dechir** method. These methods are used to further demonstrate the potential for the surveillance of space with th… ▽ More In this paper we demonstrate improved techniques to extend coherent processing intervals for passive radar processing, with the Murchison Widefield Array. Specifically, we apply a two stage linear range and Doppler migration compensation by utilising Keystone Formatting and a recent dechir** method. These methods are used to further demonstrate the potential for the surveillance of space with the Murchison Widefield Array using passive radar, by detecting objects orders of magnitude smaller than previous work. This paper also demonstrates how the linear Doppler migration methods can be extended to higher order compensation to further increase potential processing intervals. △ Less

Submitted 1 July, 2019; originally announced July 2019.

Comments: Presented at the 2019 IEEE Radar Conference in Boston earlier this year

Journal ref: 2019 IEEE Radar Conference (RadarConf)

Gridded and direct Epoch of Reionisation bispectrum estimates using the Murchison Widefield Array

Authors: Cathryn M. Trott, Catherine A. Watkinson, Christopher H. Jordan, Shintaro Yoshiura, Suman Majumdar, N. Barry, R. Byrne, B. J. Hazelton, K. Hasegawa, R. Joseph, T. Kaneuji, K. Kubota, W. Li, J. Line, C. Lynch, B. McKinley, D. A. Mitchell, M. F. Morales, S. Murray, B. Pindor, J. C. Pober, M. Rahimi, J. Riding, K. Takahashi, S. J. Tingay , et al. (20 additional authors not shown)

Abstract: We apply two methods to estimate the 21~cm bispectrum from data taken within the Epoch of Reionisation (EoR) project of the Murchison Widefield Array (MWA). Using data acquired with the Phase II compact array allows a direct bispectrum estimate to be undertaken on the multiple redundantly-spaced triangles of antenna tiles, as well as an estimate based on data gridded to the $uv$-plane. The direct… ▽ More We apply two methods to estimate the 21~cm bispectrum from data taken within the Epoch of Reionisation (EoR) project of the Murchison Widefield Array (MWA). Using data acquired with the Phase II compact array allows a direct bispectrum estimate to be undertaken on the multiple redundantly-spaced triangles of antenna tiles, as well as an estimate based on data gridded to the $uv$-plane. The direct and gridded bispectrum estimators are applied to 21 hours of high-band (167--197~MHz; $z$=6.2--7.5) data from the 2016 and 2017 observing seasons. Analytic predictions for the bispectrum bias and variance for point source foregrounds are derived. We compare the output of these approaches, the foreground contribution to the signal, and future prospects for measuring the bispectra with redundant and non-redundant arrays. We find that some triangle configurations yield bispectrum estimates that are consistent with the expected noise level after 10 hours, while equilateral configurations are strongly foreground-dominated. Careful choice of triangle configurations may be made to reduce foreground bias that hinders power spectrum estimators, and the 21~cm bispectrum may be accessible in less time than the 21~cm power spectrum for some wave modes, with detections in hundreds of hours. △ Less

Submitted 17 May, 2019; originally announced May 2019.

Comments: 19 pages, 10 figures, accepted for publication in PASA

Hunting for radio emission from the intermittent pulsar J1107-5907 at low frequencies

Authors: B. W. Meyers, S. E. Tremblay, N. D. R. Bhat, C. Flynn, V. Gupta, R. M. Shannon, S. G. Murray, C. Sobey, S. M. Ord, S. Osłowski, B. Crosse, A. Williams, F. Jankowski, W. Farah, V. Venkatraman Krishnan, T. Bateman, M. Bailes, A. Beardsley, D. Emrich, T. M. O. Franzen, B. M. Gaensler, L. Horsley, M. Johnston-Hollitt, D. L. Kaplan, D. Kenney , et al. (8 additional authors not shown)

Abstract: The rare intermittent pulsars pose some of the most challenging questions surrounding the pulsar emission mechanism, but typically have relatively minimal low-frequency ($\lesssim$ 300 MHz) coverage. We present the first low-frequency detection of the intermittent pulsar J1107-5907 with the Murchison Widefield Array (MWA) at 154 MHz and the simultaneous detection from the recently upgraded Molongl… ▽ More The rare intermittent pulsars pose some of the most challenging questions surrounding the pulsar emission mechanism, but typically have relatively minimal low-frequency ($\lesssim$ 300 MHz) coverage. We present the first low-frequency detection of the intermittent pulsar J1107-5907 with the Murchison Widefield Array (MWA) at 154 MHz and the simultaneous detection from the recently upgraded Molonglo Observatory Synthesis Telescope (UTMOST) at 835 MHz, as part of an on-going observing campaign. During a 30-minute simultaneous observation, we detected the pulsar in its bright emission state for approximately 15 minutes, where 86 and 283 pulses were detected above a signal-to-noise threshold of 6 with the MWA and UTMOST, respectively. Of the detected pulses, 51 had counterparts at both frequencies and exhibited steep spectral indices for both the bright main pulse component and the precursor component. We find that the bright state pulse energy distribution is best parameterised by a log-normal distribution at both frequencies, contrary to previous results which suggested a power law distribution. Further low-frequency observations are required in order to explore in detail aspects such as pulse-to-pulse variability, intensity modulations and to better constrain the signal propagation effects due to the interstellar medium and intermittency characteristics at these frequencies. The spectral index, extended profile emission covering a large fraction of pulse longitude, and the broadband intermittency of PSR J1107-5907 suggests that future low-frequency pulsar searches, for instance those planned with SKA-Low, will be in an excellent position to find and investigate new pulsars of this type. △ Less

Submitted 19 December, 2018; v1 submitted 2 November, 2018; originally announced November 2018.

Comments: 19 pages, 7 figures, 4 tables, accepted for publication in ApJ; minor updates to keep in-line with published version

No low-frequency emission from extremely bright Fast Radio Bursts

Authors: M. Sokolowski, N. D. R. Bhat, J. P. Macquart, R. M. Shannon, K. W. Bannister, R. D. Ekers, D. R. Scott, A. P. Beardsley, B. Crosse, D. Emrich, T. M. O. Franzen, B. M. Gaensler, L. Horsley, M. Johnston-Hollitt, D. L. Kaplan, D. Kenney, M. F. Morales, D. Pallot, G. Sleap, K. Steele, S. J. Tingay, C. M. Trott, M. Walker, R. B. Wayth, A. Williams , et al. (1 additional authors not shown)

Abstract: We present the results of a coordinated campaign conducted with the Murchison Widefield Array (MWA) to shadow Fast Radio Bursts (FRBs) detected by the Australian Square Kilometre Array Pathfinder (ASKAP) at 1.4 GHz, which resulted in simultaneous MWA observations of seven ASKAP FRBs. We de-dispersed the $24$ $\times$ $1.28$ MHz MWA images across the $170-200$ MHz band taken at 0.5 second time reso… ▽ More We present the results of a coordinated campaign conducted with the Murchison Widefield Array (MWA) to shadow Fast Radio Bursts (FRBs) detected by the Australian Square Kilometre Array Pathfinder (ASKAP) at 1.4 GHz, which resulted in simultaneous MWA observations of seven ASKAP FRBs. We de-dispersed the $24$ $\times$ $1.28$ MHz MWA images across the $170-200$ MHz band taken at 0.5 second time resolution at the known dispersion measures (DMs) and arrival times of the bursts and searched both within the ASKAP error regions (typically $\sim$ $10$ arcmin $\times$ $10$ arcmin), and beyond ($4$ deg $\times$ $4$ deg). We identified no candidates exceeding a $5σ$ threshold at these DMs in the dynamic spectra. These limits are inconsistent with the mean fluence scaling of $α=-1.8 \pm 0.3$ (${\cal F}_ν\propto ν^α$, where $ν$ is the observing frequency) that is reported for ASKAP events, most notably for the three high fluence (${\cal F}_{1.4\,{\rm GHz}} \gtrsim 100$ Jy ms) FRBs 171020, 180110 and 180324. Our limits show that pulse broadening alone cannot explain our non-detections, and that there must be a spectral turnover at frequencies above 200 MHz. We discuss and constrain parameters of three remaining plausible spectral break mechanisms: free-free absorption, intrinsic spectral turn-over of the radiative processes, and magnification of signals at ASKAP frequencies by caustics or scintillation. If free-free absorption were the cause of the spectral turnover, we constrain the thickness of the absorbing medium in terms of the electron temperature, $T$, to $< 0.03$ $(T/10^4 K)^{-1.35}$ pc for FRB 171020. △ Less

Submitted 10 October, 2018; originally announced October 2018.

Comments: 9 pages, 3 figures , 2 tables (accepted for publication in ApJL)

Journal ref: The Astrophysical Journal Letters, Vol. 867 (2018), Number 1

The Phase II Murchison Widefield Array: Design Overview

Authors: Randall B. Wayth, Steven J. Tingay, Cathryn M. Trott, David Emrich, Melanie Johnston-Hollitt, Ben McKinley, B. M. Gaensler, A. P. Beardsley, T. Booler, B. Crosse, T. M. O. Franzen, L. Horsley, D. L. Kaplan, D. Kenney, M. F. Morales, D. Pallot, G. Sleap, K. Steele, M. Walker, A. Williams, C. Wu, Iver. H. Cairns, M. D. Filipovic, S. Johnston, T. Murphy , et al. (4 additional authors not shown)

Abstract: We describe the motivation and design details of the "Phase II" upgrade of the Murchison Widefield Array (MWA) radio telescope. The expansion doubles to 256 the number of antenna tiles deployed in the array. The new antenna tiles enhance the capabilities of the MWA in several key science areas. Seventy-two of the new tiles are deployed in a regular configuration near the existing MWA core. These n… ▽ More We describe the motivation and design details of the "Phase II" upgrade of the Murchison Widefield Array (MWA) radio telescope. The expansion doubles to 256 the number of antenna tiles deployed in the array. The new antenna tiles enhance the capabilities of the MWA in several key science areas. Seventy-two of the new tiles are deployed in a regular configuration near the existing MWA core. These new tiles enhance the surface brightness sensitivity of the MWA and will improve the ability of the MWA to estimate the slope of the Epoch of Reionisation power spectrum by a factor of ~3.5. The remaining 56 tiles are deployed on long baselines, doubling the maximum baseline of the array and improving the array u,v coverage. The improved imaging capabilities will provide an order of magnitude improvement in the noise floor of MWA continuum images. The upgrade retains all of the features that have underpinned the MWA's success (large field-of-view, snapshot image quality, pointing agility) and boosts the scientific potential with enhanced imaging capabilities and by enabling new calibration strategies. △ Less

Submitted 17 September, 2018; originally announced September 2018.

Comments: 11 pages, 8 figs. Accepted for publication in PASA

In situ measurement of MWA primary beam variation using ORBCOMM

Authors: J. L. B. Line, B. McKinley, J. Rasti, M. Bhardwaj, R. B. Wayth, R. L. Webster, D. Ung, D. Emrich, L. Horsley, A. Beardsley, B. Crosse, T. M. O. Franzen, B. M. Gaensler, M. Johnston-Hollitt, D. L. Kaplan, D. Kenney, M. F. Morales, D. Pallot, K. Steele, S. J. Tingay, C. M. Trott, M. Walker, A. Williams, C. Wu

Abstract: We provide the first in situ measurements of antenna element (tile) beam shapes of the Murchison Widefield Array (MWA), a low radio-frequency interferometer and an SKA precursor. Most current MWA processing pipelines use an assumed beam shape, errors in which can cause absolute and relative flux density errors, as well as polarisation 'leakage'. This makes understanding the primary beam of paramou… ▽ More We provide the first in situ measurements of antenna element (tile) beam shapes of the Murchison Widefield Array (MWA), a low radio-frequency interferometer and an SKA precursor. Most current MWA processing pipelines use an assumed beam shape, errors in which can cause absolute and relative flux density errors, as well as polarisation 'leakage'. This makes understanding the primary beam of paramount importance, especially for sensitive experiments such as a measurement of the 21 cm line from the epoch of reionisation (EoR). The calibration requirements for measuring the EoR 21 cm line are so extreme that tile to tile beam variations may affect our ability to make a detection. Measuring the primary beam shape from visibilities alone is challenging, as multiple instrumental, atmospheric, and astrophysical factors contribute to uncertainties in the data. Building on the methods of Neben et al. (2015), we tap directly into the receiving elements of the MWA before any digitisation or correlation of the signal. Using ORBCOMM satellite passes we are able to produce all-sky maps for 4 separate tiles in the XX polarisation. We find good agreement with the cutting-edge 'fully' embedded element (FEE) model of Sokolowski et al. (2017), and observe that the MWA beamformers consistently recreate beam shapes to within ~1dB in the reliable areas of our beam maps. We also clearly observe the effects of a missing dipole from a tile in one of our beam maps, and show that the FEE model is able to reproduce this modified beam shape. We end by motivating and outlining additional onsite experiments to further constrain the primary beam behaviour. △ Less

Submitted 13 August, 2018; originally announced August 2018.

Comments: 13 pages, 7 figures Accepted to PASA

Journal ref: Publ. Astron. Soc. Aust. 35 (2018) e045

Observations of Low-Frequency Radio Emission from Millisecond Pulsars and Multipath Propagation in the Interstellar Medium

Authors: N. D. R. Bhat, S. E. Tremblay, F. Kirsten, B. W. Meyers, M. Sokolowski, W. van Straten, S. J. McSweeney, S. M. Ord, R. M. Shannon, A. Beardsley, B. Crosse, D. Emrich, T. M. O. Franzen, L. Horsley, M. Johnston-Hollitt, D. L. Kaplan, D. Kenney, M. F. Morales, D. Pallot, K. Steele, S. J. Tingay, C. M. Trott, M. Walker, R. B. Wayth, A. Williams , et al. (1 additional authors not shown)

Abstract: Studying the gravitational-wave sky with pulsar timing arrays (PTAs) is a key science goal for the Square Kilometre Array (SKA) and its pathfinder telescopes. With current PTAs reaching sub-microsecond timing precision, making accurate measurements of interstellar propagation effects and mitigating them effectively has become increasingly important to realise PTA goals. As these effects are much s… ▽ More Studying the gravitational-wave sky with pulsar timing arrays (PTAs) is a key science goal for the Square Kilometre Array (SKA) and its pathfinder telescopes. With current PTAs reaching sub-microsecond timing precision, making accurate measurements of interstellar propagation effects and mitigating them effectively has become increasingly important to realise PTA goals. As these effects are much stronger at longer wavelengths, low-frequency observations are most appealing for characterizing the interstellar medium (ISM) along the sight lines toward PTA pulsars. The Murchison Widefield Array (MWA) and the Engineering Development Array (EDA), which utilizes MWA technologies, present promising opportunities for undertaking such studies, particularly for PTA pulsars located in the southern sky. Such pulsars are also the prime targets for PTA efforts planned with the South African MeerKAT, and eventually with the SKA. In this paper we report on observations of two bright southern millisecond pulsars PSRs J0437-4715 and J2145-0750 made with these facilities; MWA observations sampling multiple frequencies across the 80-250 MHz frequency range, while the EDA providing direct-sampled baseband data to yield a large instantaneous usable bandwidth of $\sim$200 MHz. Using these observations, we investigate various aspects relating to pulsar emission and ISM properties, such as spectral evolution of the mean pulse shape, scintillation as a function of frequency, chromaticity in interstellar dispersion, and flux density spectra at low frequencies. Systematic and regular monitoring observations will help ascertain the role of low-frequency measurements in PTA experiments, while simultaneously providing a detailed characterization of the ISM toward the pulsars, which will be useful in devising optimal observing strategies for future PTA experiments. △ Less

Submitted 18 July, 2018; originally announced July 2018.

Comments: 23 pages, 10 Figures, 4 Tables, Accepted to ApJS

Comparing Redundant and Sky Model Based Interferometric Calibration: A First Look with Phase II of the MWA

Authors: W. Li, J. C. Pober, B. J. Hazelton, N. Barry, M. F. Morales, I. Sullivan, A. R. Parsons, Z. S. Ali, J. S. Dillon, A. P. Beardsley, J. D. Bowman, F. Briggs, R. Byrne, P. Carroll, B. Crosse, D. Emrich, A. Ewall-Wice, L. Feng, T. M. O. Franzen, J. N. Hewitt, L. Horsley, D. C. Jacobs, M. Johnston-Hollitt, C. Jordan, R. C. Joseph , et al. (31 additional authors not shown)

Abstract: Interferometric arrays seeking to measure the 21 cm signal from the Epoch of Reionization must contend with overwhelmingly bright emission from foreground sources. Accurate recovery of the 21 cm signal will require precise calibration of the array, and several new avenues for calibration have been pursued in recent years, including methods using redundancy in the antenna configuration. The newly u… ▽ More Interferometric arrays seeking to measure the 21 cm signal from the Epoch of Reionization must contend with overwhelmingly bright emission from foreground sources. Accurate recovery of the 21 cm signal will require precise calibration of the array, and several new avenues for calibration have been pursued in recent years, including methods using redundancy in the antenna configuration. The newly upgraded Phase II of Murchison Widefield Array (MWA) is the first interferometer that has large numbers of redundant baselines while retaining good instantaneous UV-coverage. This array therefore provides a unique opportunity to compare redundant calibration with sky-model based algorithms. In this paper, we present the first results from comparing both calibration approaches with MWA Phase II observations. For redundant calibration, we use the package OMNICAL, and produce sky-based calibration solutions with the analysis package Fast Holographic Deconvolution (FHD). There are three principal results. (1) We report the success of OMNICAL on observations of ORBComm satellites, showing substantial agreement between redundant visibility measurements after calibration. (2) We directly compare OMNICAL calibration solutions with those from FHD, and demonstrate these two different calibration schemes give extremely similar results. (3) We explore improved calibration by combining OMNICAL and FHD. We evaluate these combined methods using power spectrum techniques developed for EoR analysis and find evidence for marginal improvements mitigating artifacts in the power spectrum. These results are likely limited by signal-to-noise in the six hours of data used, but suggest future directions for combining these two calibration schemes. △ Less

Submitted 13 July, 2018; originally announced July 2018.

Comments: 20 pages, 11 figures. Accepted to ApJ

Limits on radio emission from meteors using the MWA

Authors: Xiang Zhang, Paul Hancock, Hadrien A. R. Devillepoix, Randall B. Wayth, A. Beardsley, B. Crosse, D. Emrich, T. M. O. Franzen, B. M. Gaensler, L. Horsley, M. Johnston-Hollitt, D. L. Kaplan, D. Kenney, M. F. Morales, D. Pallot, K. Steele, S. J. Tingay, C. M. Trott, M. Walker, A. Williams, C. Wu, Jianghui Ji, Yuehua Ma

Abstract: Recently, low frequency, broadband radio emission has been observed accompanying bright meteors by the Long Wavelength Array (LWA). The broadband spectra between 20 and 60 MHz were captured for several events, while the spectral index (dependence of flux density on frequency, with $S_ν\propto ν^α$) was estimated to be $-4\pm1$ during the peak of meteor afterglows. Here we present a survey of meteo… ▽ More Recently, low frequency, broadband radio emission has been observed accompanying bright meteors by the Long Wavelength Array (LWA). The broadband spectra between 20 and 60 MHz were captured for several events, while the spectral index (dependence of flux density on frequency, with $S_ν\propto ν^α$) was estimated to be $-4\pm1$ during the peak of meteor afterglows. Here we present a survey of meteor emission and other transient events using the Murchison Widefield Array (MWA) at 72-103 MHz. In our 322-hour survey, down to a $5σ$ detection threshold of 3.5 Jy/beam, no transient candidates were identified as intrinsic emission from meteors. We derived an upper limit of -3.7 (95% confidence limit) on the spectral index in our frequency range. We also report detections of other transient events, like reflected FM broadcast signals from small satellites, conclusively demonstrating the ability of the MWA to detect and track space debris on scales as small as 0.1 m in low Earth orbits. △ Less

Submitted 19 April, 2018; originally announced April 2018.

Comments: Accepted for Publication in MNRAS on 11 April 2018, 11 pages, 11 figures, 5 tables

A Serendipitous MWA Search for Narrow-band and Broad-band Low Frequency Radio Transmissions from 1I/2017 U1 'Oumuamua

Authors: S. J. Tingay, D. L. Kaplan, E. Lenc, S. Croft, B. McKinley, A. Beardsley, B. Crosse, D. Emrich, T. M. O. Franzen, B. M. Gaensler, L. Horsley, M. Johnston-Hollitt, D. Kenney, M. F. Morales, D. Pallot, K. Steele, C. M. Trott, M. Walker, R. B. Wayth, A. Williams, C. Wu

Abstract: We examine data from the Murchison Widefield Array (MWA) in the frequency range 72 -- 102 MHz for a field-of-view that serendipitously contained the interstellar object 'Oumuamua on 2017 November 28. Observations took place with time resolution of 0.5 s and frequency resolution of 10 kHz. %This observation was undertaken for another purpose but due to the MWA's extremely large field-of-view, 'Oumu… ▽ More We examine data from the Murchison Widefield Array (MWA) in the frequency range 72 -- 102 MHz for a field-of-view that serendipitously contained the interstellar object 'Oumuamua on 2017 November 28. Observations took place with time resolution of 0.5 s and frequency resolution of 10 kHz. %This observation was undertaken for another purpose but due to the MWA's extremely large field-of-view, 'Oumuamua was serendipitously observed simultaneously. Based on the interesting but highly unlikely suggestion that 'Oumuamua is an interstellar spacecraft, due to some unusual orbital and morphological characteristics, we examine our data for signals that might indicate the presence of intelligent life associated with 'Oumuamua. We searched our radio data for: 1) impulsive narrow-band signals; 2) persistent narrow-band signals; and 3) impulsive broadband signals. We found no such signals with non-terrestrial origins and make estimates of the upper limits on Equivalent Isotropic Radiated Power (EIRP) for these three cases of approximately 7 kW, 840 W, and 100 kW, respectively. These transmitter powers are well within the capabilities of human technologies, and are therefore plausible for alien civilizations. While the chances of positive detection in any given Search for Extraterrestrial Intelligence (SETI) experiment are vanishingly small, the characteristics of new generation telescopes such as the MWA (and in the future, the Square Kilometre Array) make certain classes of SETI experiment easy, or even a trivial by-product of astrophysical observations. This means that the future costs of SETI experiments are very low, allowing large target lists to partially balance the low probability of a positive detection. △ Less

Submitted 26 February, 2018; originally announced February 2018.

Comments: Nine pages, four figures. Accepted for publication in ApJ

Follow up of GW170817 and its electromagnetic counterpart by Australian-led observing programs

Authors: I. Andreoni, K. Ackley, J. Cooke, A. Acharyya, J. R. Allison, G. E. Anderson, M. C. B. Ashley, D. Baade, M. Bailes, K. Bannister, A. Beardsley, M. S. Bessell, F. Bian, P. A. Bland, M. Boer, T. Booler, A. Brandeker, I. S. Brown, D. Buckley, S. -W. Chang, D. M. Coward, S. Crawford, H. Crisp, B. Crosse, A. Cucchiara , et al. (100 additional authors not shown)

Abstract: The discovery of the first electromagnetic counterpart to a gravitational wave signal has generated follow-up observations by over 50 facilities world-wide, ushering in the new era of multi-messenger astronomy. In this paper, we present follow-up observations of the gravitational wave event GW170817 and its electromagnetic counterpart SSS17a/DLT17ck (IAU label AT2017gfo) by 14 Australian telescope… ▽ More The discovery of the first electromagnetic counterpart to a gravitational wave signal has generated follow-up observations by over 50 facilities world-wide, ushering in the new era of multi-messenger astronomy. In this paper, we present follow-up observations of the gravitational wave event GW170817 and its electromagnetic counterpart SSS17a/DLT17ck (IAU label AT2017gfo) by 14 Australian telescopes and partner observatories as part of Australian-based and Australian-led research programs. We report early- to late-time multi-wavelength observations, including optical imaging and spectroscopy, mid-infrared imaging, radio imaging, and searches for fast radio bursts. Our optical spectra reveal that the transient source afterglow cooled from approximately 6400K to 2100K over a 7-day period and produced no significant optical emission lines. The spectral profiles, cooling rate, and photometric light curves are consistent with the expected outburst and subsequent processes of a binary neutron star merger. Star formation in the host galaxy probably ceased at least a Gyr ago, although there is evidence for a galaxy merger. Binary pulsars with short (100 Myr) decay times are therefore unlikely progenitors, but pulsars like PSR B1534+12 with its 2.7 Gyr coalescence time could produce such a merger. The displacement (about 2.2 kpc) of the binary star system from the centre of the main galaxy is not unusual for stars in the host galaxy or stars originating in the merging galaxy, and therefore any constraints on the kick velocity imparted to the progenitor are poor. △ Less

Submitted 16 October, 2017; originally announced October 2017.

Comments: 26 pages, 9 figures, 15 tables

The Engineering Development Array: A low frequency radio telescope utilising SKA precursor technology

Authors: Randall Wayth, Marcin Sokolowski, Tom Booler, Brian Crosse, David Emrich, Robert Grootjans, Peter J. Hall, Luke Horsley, Budi Juswardy, David Kenney, Kim Steele, Adrian Sutinjo, Steven J. Tingay, Daniel Ung, Mia Walker, Andrew Williams, A. Beardsley, T. M. O. Franzen, M. Johnston-Hollitt, D. L. Kaplan, M. F. Morales, D. Pallot, C. M. Trott, C. Wu

Abstract: We describe the design and performance of the Engineering Development Array (EDA), which is a low frequency radio telescope comprising 256 dual-polarisation dipole antennas working as a phased-array. The EDA was conceived of, developed, and deployed in just 18 months via re-use of Square Kilometre Array (SKA) precursor technology and expertise, specifically from the Murchison Widefield Array (MWA)… ▽ More We describe the design and performance of the Engineering Development Array (EDA), which is a low frequency radio telescope comprising 256 dual-polarisation dipole antennas working as a phased-array. The EDA was conceived of, developed, and deployed in just 18 months via re-use of Square Kilometre Array (SKA) precursor technology and expertise, specifically from the Murchison Widefield Array (MWA) radio telescope. Using drift scans and a model for the sky brightness temperature at low frequencies, we have derived the EDA's receiver temperature as a function of frequency. The EDA is shown to be sky-noise limited over most of the frequency range measured between 60 and 240 MHz. By using the EDA in interferometric mode with the MWA, we used calibrated visibilities to measure the absolute sensitivity of the array. The measured array sensitivity matches very well with a model based on the array layout and measured receiver temperature. The results demonstrate the practicality and feasibility of using MWA-style precursor technology for SKA-scale stations. The modular architecture of the EDA allows upgrades to the array to be rolled out in a staged approach. Future improvements to the EDA include replacing the second stage beamformer with a fully digital system, and to transition to using RF-over-fibre for the signal output from first stage beamformers. △ Less

Submitted 11 July, 2017; originally announced July 2017.

Comments: 9 figs, 2 tables. Accepted for publication in PASA

A Digital-Receiver for the Murchison Widefield Array

Authors: Thiagaraj Prabu, K. S. Srivani, D. Anish Roshi, P. A. Kamini, S. Madhavi, David Emrich, Brian Crosse, Andrew J. Williams, Mark Waterson, Avinash A. Deshpande, N. Udaya Shankar, Ravi Subrahmanyan, Frank H. Briggs, Robert F. Goeke, Steven J. Tingay, Melanie Johnston-Hollitt, Gopalakrishna M R, Edward H. Morgan, Joseph Pathikulangara, John D. Bunton, Grant Hampson, Christopher Williams, Stephen M. Ord, Randall B. Wayth, Deepak Kumar , et al. (33 additional authors not shown)

Abstract: An FPGA-based digital-receiver has been developed for a low-frequency imaging radio interferometer, the Murchison Widefield Array (MWA). The MWA, located at the Murchison Radio-astronomy Observatory (MRO) in Western Australia, consists of 128 dual-polarized aperture-array elements (tiles) operating between 80 and 300\,MHz, with a total processed bandwidth of 30.72 MHz for each polarization. Radio-… ▽ More An FPGA-based digital-receiver has been developed for a low-frequency imaging radio interferometer, the Murchison Widefield Array (MWA). The MWA, located at the Murchison Radio-astronomy Observatory (MRO) in Western Australia, consists of 128 dual-polarized aperture-array elements (tiles) operating between 80 and 300\,MHz, with a total processed bandwidth of 30.72 MHz for each polarization. Radio-frequency signals from the tiles are amplified and band limited using analog signal conditioning units; sampled and channelized by digital-receivers. The signals from eight tiles are processed by a single digital-receiver, thus requiring 16 digital-receivers for the MWA. The main function of the digital-receivers is to digitize the broad-band signals from each tile, channelize them to form the sky-band, and transport it through optical fibers to a centrally located correlator for further processing. The digital-receiver firmware also implements functions to measure the signal power, perform power equalization across the band, detect interference-like events, and invoke diagnostic modes. The digital-receiver is controlled by high-level programs running on a single-board-computer. This paper presents the digital-receiver design, implementation, current status, and plans for future enhancements. △ Less

Submitted 13 February, 2015; originally announced February 2015.

Comments: 14 pages, 7 figures

The Murchison Widefield Array Correlator

Authors: S. M. Ord, B. Crosse, D. Emrich, D. Pallot, R. B. Wayth, M. A. Clark, S. E. Tremblay, W. Arcus, D. Barnes, M. Bell, G. Bernardi, N. D. R. Bhat, J. D. Bowman, F. Briggs, J. D. Bunton, R. J. Cappallo, B. E. Corey, A. A. Deshpande, L. deSouza, A. Ewell-Wice, L. Feng, R. Goeke, L. J. Greenhill, B. J. Hazelton, D. Herne , et al. (42 additional authors not shown)

Abstract: The Murchison Widefield Array (MWA) is a Square Kilometre Array (SKA) Precursor. The telescope is located at the Murchison Radio--astronomy Observatory (MRO) in Western Australia (WA). The MWA consists of 4096 dipoles arranged into 128 dual polarisation aperture arrays forming a connected element interferometer that cross-correlates signals from all 256 inputs. A hybrid approach to the correlation… ▽ More The Murchison Widefield Array (MWA) is a Square Kilometre Array (SKA) Precursor. The telescope is located at the Murchison Radio--astronomy Observatory (MRO) in Western Australia (WA). The MWA consists of 4096 dipoles arranged into 128 dual polarisation aperture arrays forming a connected element interferometer that cross-correlates signals from all 256 inputs. A hybrid approach to the correlation task is employed, with some processing stages being performed by bespoke hardware, based on Field Programmable Gate Arrays (FPGAs), and others by Graphics Processing Units (GPUs) housed in general purpose rack mounted servers. The correlation capability required is approximately 8 TFLOPS (Tera FLoating point Operations Per Second). The MWA has commenced operations and the correlator is generating 8.3 TB/day of correlation products, that are subsequently transferred 700 km from the MRO to Perth (WA) in real-time for storage and offline processing. In this paper we outline the correlator design, signal path, and processing elements and present the data format for the internal and external interfaces. △ Less

Submitted 23 January, 2015; originally announced January 2015.

Comments: 17 pages, 9 figures. Accepted for publication in PASA. Some figures altered to meet astro-ph submission requirements

The High Time and Frequency Resolution Capabilities of the Murchison Widefield Array

Authors: S. E. Tremblay, S. M. Ord, N. D. R. Bhat, S. J. Tingay, B. Crosse, D. Pallot, S. I. Oronsaye, G. Bernardi, J. D. Bowman, F. Briggs, R. J. Cappallo, B. E. Corey, A. A. Deshpande, D. Emrich, R. Goeke, L. J. Greenhill, B. J. Hazelton, M. Johnston-Hollitt, D. L. Kaplan, J. C. Kasper, E. Kratzenberg, C. J. Lonsdale, M. J. Lynch, S. R. McWhirter, D. A. Mitchell , et al. (15 additional authors not shown)

Abstract: The science cases for incorporating high time resolution capabilities into modern radio telescopes are as numerous as they are compelling. Science targets range from exotic sources such as pulsars, to our Sun, to recently detected possible extragalactic bursts of radio emission, the so-called fast radio bursts (FRBs). Originally conceived purely as an imaging telescope, the initial design of the M… ▽ More The science cases for incorporating high time resolution capabilities into modern radio telescopes are as numerous as they are compelling. Science targets range from exotic sources such as pulsars, to our Sun, to recently detected possible extragalactic bursts of radio emission, the so-called fast radio bursts (FRBs). Originally conceived purely as an imaging telescope, the initial design of the Murchison Widefield Array (MWA) did not include the ability to access high time and frequency resolution voltage data. However, the flexibility of the MWA's software correlator allowed an off-the-shelf solution for adding this capability. This paper describes the system that records the 100 micro-second and 10 kHz resolution voltage data from the MWA. Example science applications, where this capability is critical, are presented, as well as accompanying commissioning results from this mode to demonstrate verification. △ Less

Submitted 23 January, 2015; originally announced January 2015.

Comments: 9 pages, 6 figures, 1 table. Accepted for publication in PASA

Optimising NGAS for the MWA Archive

Authors: Chen Wu, Andreas Wicenec, Dave Pallot, Alessio Checcucci

Abstract: The Murchison Widefield Array (MWA) is a next-generation radio telescope, generating visibility data products continuously at about 400 MB/s. Efficiently managing and archiving this data is a challenge. The MWA Archive consists of dataflows and storage sub-systems distributed across three tiers. At its core is the open source software - the Next-Generation Archive System (NGAS) - that was initiall… ▽ More The Murchison Widefield Array (MWA) is a next-generation radio telescope, generating visibility data products continuously at about 400 MB/s. Efficiently managing and archiving this data is a challenge. The MWA Archive consists of dataflows and storage sub-systems distributed across three tiers. At its core is the open source software - the Next-Generation Archive System (NGAS) - that was initially developed in ESO. However, to meet the MWA data challenge, we have tailored and optimised NGAS to achieve high-throughput data ingestion, efficient dataflow management, multi-tiered data storage and processing-aware data staging. △ Less

Submitted 28 August, 2013; originally announced August 2013.

Comments: 15 pages

Realisation of a low frequency SKA Precursor: The Murchison Widefield Array

Authors: S. J. Tingay, R. Goeke, J. N. Hewitt, E. Morgan, R. A Remillard, C. L. Williams, J. D. Bowman, D. Emrich, S. M. Ord, T. Booler, B. Crosse, D. Pallot, W. Arcus, T. Colegate, P. J. Hall, D. Herne, M. J. Lynch, F. Schlagenhaufer, S. Tremblay, R. B. Wayth, M. Waterson, D. A. Mitchell, R. J. Sault, R. L. Webster, J. S. B. Wyithe , et al. (34 additional authors not shown)

Abstract: The Murchison Widefield Array is a low frequency (80 - 300 MHz) SKA Precursor, comprising 128 aperture array elements distributed over an area of 3 km diameter. The MWA is located at the extraordinarily radio quiet Murchison Radioastronomy Observatory in the mid-west of Western Australia, the selected home for the Phase 1 and Phase 2 SKA low frequency arrays. The MWA science goals include: 1) dete… ▽ More The Murchison Widefield Array is a low frequency (80 - 300 MHz) SKA Precursor, comprising 128 aperture array elements distributed over an area of 3 km diameter. The MWA is located at the extraordinarily radio quiet Murchison Radioastronomy Observatory in the mid-west of Western Australia, the selected home for the Phase 1 and Phase 2 SKA low frequency arrays. The MWA science goals include: 1) detection of fluctuations in the brightness temperature of the diffuse redshifted 21 cm line of neutral hydrogen from the epoch of reionisation; 2) studies of Galactic and extragalactic processes based on deep, confusion-limited surveys of the full sky visible to the array; 3) time domain astrophysics through exploration of the variable radio sky; and 4) solar imaging and characterisation of the heliosphere and ionosphere via propagation effects on background radio source emission. This paper will focus on a brief discussion of the as-built MWA system, highlighting several novel characteristics of the instrument, and a brief progress report (as of June 2012) on the final construction phase. Practical completion of the MWA is expected in November 2012, with commissioning commencing from approximately August 2012 and operations commencing near mid 2013. A brief description of recent science results from the MWA prototype instrument is given. △ Less

Submitted 6 December, 2012; originally announced December 2012.

Comments: 8 pages, Resolving the Sky - Radio Interferometry: Past, Present and Future - RTS2012, April 17-20, 2012, Manchester, UK

The Murchison Widefield Array: the Square Kilometre Array Precursor at low radio frequencies

Authors: S. J. Tingay, R. Goeke, J. D. Bowman, D. Emrich, S. M. Ord, D. A. Mitchell, M. F. Morales, T. Booler, B. Crosse, D. Pallot, A. Wicenec, W. Arcus, D. Barnes, G. Bernardi, F. Briggs, S. Burns, J. D. Bunton, R. J. Cappallo, T. Colegate, B. E. Corey, A. Deshpande, L. deSouza, B. M. Gaensler, L. J. Greenhill, J. Hall , et al. (35 additional authors not shown)

Abstract: The Murchison Widefield Array (MWA) is one of three Square Kilometre Array Precursor telescopes and is located at the Murchison Radio-astronomy Observatory in the Murchison Shire of the mid-west of Western Australia, a location chosen for its extremely low levels of radio frequency interference. The MWA operates at low radio frequencies, 80-300 MHz, with a processed bandwidth of 30.72 MHz for both… ▽ More The Murchison Widefield Array (MWA) is one of three Square Kilometre Array Precursor telescopes and is located at the Murchison Radio-astronomy Observatory in the Murchison Shire of the mid-west of Western Australia, a location chosen for its extremely low levels of radio frequency interference. The MWA operates at low radio frequencies, 80-300 MHz, with a processed bandwidth of 30.72 MHz for both linear polarisations, and consists of 128 aperture arrays (known as tiles) distributed over a ~3 km diameter area. Novel hybrid hardware/software correlation and a real-time imaging and calibration systems comprise the MWA signal processing backend. In this paper the as-built MWA is described both at a system and sub-system level, the expected performance of the array is presented, and the science goals of the instrument are summarised. △ Less

Submitted 29 June, 2012; originally announced June 2012.

Comments: Submitted to PASA. 11 figures, 2 tables