-
Atacama Large Aperture Submillimeter Telescope (AtLAST) Science: Resolving the Hot and Ionized Universe through the Sunyaev-Zeldovich effect
Authors:
Luca Di Mascolo,
Yvette Perrott,
Tony Mroczkowski,
Stefano Andreon,
Stefano Ettori,
Aurora Simionescu,
Srinivasan Raghunathan,
Joshiwa van Marrewijk,
Claudia Cicone,
Minju Lee,
Dylan Nelson,
Laura Sommovigo,
Mark Booth,
Pamela Klaassen,
Paola Andreani,
Martin A. Cordiner,
Doug Johnstone,
Eelco van Kampen,
Daizhong Liu,
Thomas J. Maccarone,
Thomas W. Morris,
Amélie Saintonge,
Matthew Smith,
Alexander E. Thelen,
Sven Wedemeyer
Abstract:
An omnipresent feature of the multi-phase ``cosmic web'' is that warm/hot (>$10^5$ K) ionized gas pervades it. This gas constitutes a relevant contribution to the overall universal matter budget across multiple scales, from the several tens of Mpc-scale IGM filaments, to the Mpc ICM, all the way down to the CGM surrounding individual galaxies, on scales from ~1 kpc up to their respective virial ra…
▽ More
An omnipresent feature of the multi-phase ``cosmic web'' is that warm/hot (>$10^5$ K) ionized gas pervades it. This gas constitutes a relevant contribution to the overall universal matter budget across multiple scales, from the several tens of Mpc-scale IGM filaments, to the Mpc ICM, all the way down to the CGM surrounding individual galaxies, on scales from ~1 kpc up to their respective virial radii (~100 kpc). The study of the hot baryonic component of cosmic matter density represents a powerful means for constraining the intertwined evolution of galactic populations and large-scale cosmological structures, for tracing the matter assembly in the Universe and its thermal history. To this end, the SZ effect provides the ideal observational tool for measurements out to the beginnings of structure formation. The SZ effect is caused by the scattering of the photons from the cosmic microwave background off the hot electrons embedded within cosmic structures, and provides a redshift-independent perspective on the thermal and kinematic properties of the warm/hot gas. Still, current and future (sub)mm facilities have been providing only a partial view of the SZ Universe due to any combination of: limited angular resolution, spectral coverage, field of view, spatial dynamic range, sensitivity. In this paper, we motivate the development of a wide-field, broad-band, multi-chroic continuum instrument for the Atacama Large Aperture Submillimeter Telescope (AtLAST) by identifying the scientific drivers that will deepen our understanding of the complex thermal evolution of cosmic structures. On a technical side, this will necessarily require efficient multi-wavelength map** of the SZ signal with an unprecedented spatial dynamic range (from arcsecond to degree scales) and we employ theoretical forecasts to determine the key instrumental constraints for achieving our goals. [abridged]
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
maria: A novel simulator for forecasting (sub-)mm observations
Authors:
J. van Marrewijk,
T. W. Morris,
T. Mroczkowski,
C. Cicone,
S. Dicker,
L. Di Mascolo,
S. K. Haridas,
J. Orlowski-Scherer,
E. Rasia,
C. Romero
Abstract:
Submillimeter single-dish telescopes offer two key advantages compared to interferometers: they can efficiently map larger portions of the sky and recover larger spatial scales. Nonetheless, fluctuations in the atmosphere limit the accurate retrieval of signals from astronomical sources. Therefore, we introduce a user-friendly simulator named ${\tt maria}$ to optimize scanning strategies and instr…
▽ More
Submillimeter single-dish telescopes offer two key advantages compared to interferometers: they can efficiently map larger portions of the sky and recover larger spatial scales. Nonetheless, fluctuations in the atmosphere limit the accurate retrieval of signals from astronomical sources. Therefore, we introduce a user-friendly simulator named ${\tt maria}$ to optimize scanning strategies and instrument designs to efficiently reduce atmospheric noise and filtering effects. We further use this tool to produce synthetic time streams and maps from hydrodynamical simulations, enabling a fair comparison between theory and reality. ${\tt maria}$ has implemented a suite of telescope and instrument designs intended to mimic current and future facilities. To generate synthetic time-ordered data, each mock observatory scans through the atmosphere in a configurable pattern over the celestial object. We generate evolving and location-and-time-specific weather for each of the fiducial sites using a combination of satellite and ground-based measurements. While ${\tt maria}$ is a generic virtual telescope, this study specifically focuses on mimicking broadband bolometers observing at 100 GHz. To validate our virtual telescope, we compare the mock time streams with real MUSTANG-2 observations and find that they are quantitatively similar by conducting a k-sample Anderson-Darling test resulting in p<0.001. Subsequently, we image the time-ordered data to create noise maps and mock observations of clusters of galaxies for both MUSTANG-2 and an instrument concept for the 50m Atacama Large Aperture Submillimeter Telescope (AtLAST). Furthermore, using ${\tt maria}$, we find that a 50m dish provides the highest levels of correlation of atmospheric signals across adjacent detectors compared to smaller apertures (e.g., 42-cm and 6-m survey experiments), facilitating removal of atmospheric signal on large scales.
△ Less
Submitted 20 February, 2024; v1 submitted 16 February, 2024;
originally announced February 2024.
-
Adaptive Optics Telemetry Standard: Design and specification of a novel data exchange format
Authors:
Tiago Gomes,
Carlos M. Correia,
Lisa Bardou,
Sylvain Cetre,
Johann Kolb,
Caroline Kulcsár,
François Leroux,
Timothy Morris,
Nuno Morujão,
Benoît Neichel,
Jean-Luc Beuzit,
Paulo Garcia
Abstract:
The amount of Adaptive Optics (AO) telemetry generated by VIS/NIR ground-based observatories is ever greater, leading to a growing need for a standardised data exchange format to support performance analysis and AO research and development activities that involve large-scale telemetry mining, processing, and curation. This paper introduces the Adaptive Optics Telemetry (AOT) data exchange format a…
▽ More
The amount of Adaptive Optics (AO) telemetry generated by VIS/NIR ground-based observatories is ever greater, leading to a growing need for a standardised data exchange format to support performance analysis and AO research and development activities that involve large-scale telemetry mining, processing, and curation. This paper introduces the Adaptive Optics Telemetry (AOT) data exchange format as a standard for sharing AO telemetry from visible/infrared ground-based observatories. AOT is based on the Flexible Image Transport System (FITS) and aims to provide unambiguous and consistent data access across various systems and configurations, including natural and single/multiple laser guide-star AO systems. We designed AOT focused on two key use cases: atmospheric turbulence parameter estimation and point-spread function reconstruction (PSF-R). We prototyped and tested the design using existing AO telemetry datasets from multiple systems: single conjugate with natural and laser guide stars, tomographic systems with multi-channel wavefront sensors, single and multi wavefront correctors in systems featuring either a Shack-Hartmann or Pyramid as main wavefront sensors. The AOT file structure has been thoroughly defined, specifying data fields, descriptions, data types, units, and expected dimensions. To support this format, we have developed a Python package that enables data conversion, reading, writing and exploration of AOT files, which has been made publicly available and compatible with a general-purpose Python package manager. We demonstrate the flexibility of the AOT format by packaging data from five different instruments, installed on different telescopes.
△ Less
Submitted 13 December, 2023;
originally announced December 2023.
-
The Atacama Cosmology Telescope: High-resolution component-separated maps across one-third of the sky
Authors:
William R. Coulton,
Mathew S. Madhavacheril,
Adriaan J. Duivenvoorden,
J. Colin Hill,
Irene Abril-Cabezas,
Peter A. R. Ade,
Simone Aiola,
Tommy Alford,
Mandana Amiri,
Stefania Amodeo,
Rui An,
Zachary Atkins,
Jason E. Austermann,
Nicholas Battaglia,
Elia Stefano Battistelli,
James A. Beall,
Rachel Bean,
Benjamin Beringue,
Tanay Bhandarkar,
Emily Biermann,
Boris Bolliet,
J Richard Bond,
Hongbo Cai,
Erminia Calabrese,
Victoria Calafut
, et al. (129 additional authors not shown)
Abstract:
Observations of the millimeter sky contain valuable information on a number of signals, including the blackbody cosmic microwave background (CMB), Galactic emissions, and the Compton-$y$ distortion due to the thermal Sunyaev-Zel'dovich (tSZ) effect. Extracting new insight into cosmological and astrophysical questions often requires combining multi-wavelength observations to spectrally isolate one…
▽ More
Observations of the millimeter sky contain valuable information on a number of signals, including the blackbody cosmic microwave background (CMB), Galactic emissions, and the Compton-$y$ distortion due to the thermal Sunyaev-Zel'dovich (tSZ) effect. Extracting new insight into cosmological and astrophysical questions often requires combining multi-wavelength observations to spectrally isolate one component. In this work, we present a new arcminute-resolution Compton-$y$ map, which traces out the line-of-sight-integrated electron pressure, as well as maps of the CMB in intensity and E-mode polarization, across a third of the sky (around 13,000 sq.~deg.). We produce these through a joint analysis of data from the Atacama Cosmology Telescope (ACT) Data Release 4 and 6 at frequencies of roughly 93, 148, and 225 GHz, together with data from the \textit{Planck} satellite at frequencies between 30 GHz and 545 GHz. We present detailed verification of an internal linear combination pipeline implemented in a needlet frame that allows us to efficiently suppress Galactic contamination and account for spatial variations in the ACT instrument noise. These maps provide a significant advance, in noise levels and resolution, over the existing \textit{Planck} component-separated maps and will enable a host of science goals including studies of cluster and galaxy astrophysics, inferences of the cosmic velocity field, primordial non-Gaussianity searches, and gravitational lensing reconstruction of the CMB.
△ Less
Submitted 3 July, 2023;
originally announced July 2023.
-
The Atacama Cosmology Telescope: DR6 Gravitational Lensing Map and Cosmological Parameters
Authors:
Mathew S. Madhavacheril,
Frank J. Qu,
Blake D. Sherwin,
Niall MacCrann,
Yaqiong Li,
Irene Abril-Cabezas,
Peter A. R. Ade,
Simone Aiola,
Tommy Alford,
Mandana Amiri,
Stefania Amodeo,
Rui An,
Zachary Atkins,
Jason E. Austermann,
Nicholas Battaglia,
Elia Stefano Battistelli,
James A. Beall,
Rachel Bean,
Benjamin Beringue,
Tanay Bhandarkar,
Emily Biermann,
Boris Bolliet,
J Richard Bond,
Hongbo Cai,
Erminia Calabrese
, et al. (134 additional authors not shown)
Abstract:
We present cosmological constraints from a gravitational lensing mass map covering 9400 sq. deg. reconstructed from CMB measurements made by the Atacama Cosmology Telescope (ACT) from 2017 to 2021. In combination with BAO measurements (from SDSS and 6dF), we obtain the amplitude of matter fluctuations $σ_8 = 0.819 \pm 0.015$ at 1.8% precision, $S_8\equivσ_8({Ω_{\rm m}}/0.3)^{0.5}=0.840\pm0.028$ an…
▽ More
We present cosmological constraints from a gravitational lensing mass map covering 9400 sq. deg. reconstructed from CMB measurements made by the Atacama Cosmology Telescope (ACT) from 2017 to 2021. In combination with BAO measurements (from SDSS and 6dF), we obtain the amplitude of matter fluctuations $σ_8 = 0.819 \pm 0.015$ at 1.8% precision, $S_8\equivσ_8({Ω_{\rm m}}/0.3)^{0.5}=0.840\pm0.028$ and the Hubble constant $H_0= (68.3 \pm 1.1)\, \text{km}\,\text{s}^{-1}\,\text{Mpc}^{-1}$ at 1.6% precision. A joint constraint with CMB lensing measured by the Planck satellite yields even more precise values: $σ_8 = 0.812 \pm 0.013$, $S_8\equivσ_8({Ω_{\rm m}}/0.3)^{0.5}=0.831\pm0.023$ and $H_0= (68.1 \pm 1.0)\, \text{km}\,\text{s}^{-1}\,\text{Mpc}^{-1}$. These measurements agree well with $Λ$CDM-model extrapolations from the CMB anisotropies measured by Planck. To compare these constraints to those from the KiDS, DES, and HSC galaxy surveys, we revisit those data sets with a uniform set of assumptions, and find $S_8$ from all three surveys are lower than that from ACT+Planck lensing by varying levels ranging from 1.7-2.1$σ$. These results motivate further measurements and comparison, not just between the CMB anisotropies and galaxy lensing, but also between CMB lensing probing $z\sim 0.5-5$ on mostly-linear scales and galaxy lensing at $z\sim 0.5$ on smaller scales. We combine our CMB lensing measurements with CMB anisotropies to constrain extensions of $Λ$CDM, limiting the sum of the neutrino masses to $\sum m_ν < 0.12$ eV (95% c.l.), for example. Our results provide independent confirmation that the universe is spatially flat, conforms with general relativity, and is described remarkably well by the $Λ$CDM model, while paving a promising path for neutrino physics with gravitational lensing from upcoming ground-based CMB surveys.
△ Less
Submitted 11 April, 2023;
originally announced April 2023.
-
The Atacama Cosmology Telescope: A Measurement of the DR6 CMB Lensing Power Spectrum and its Implications for Structure Growth
Authors:
Frank J. Qu,
Blake D. Sherwin,
Mathew S. Madhavacheril,
Dongwon Han,
Kevin T. Crowley,
Irene Abril-Cabezas,
Peter A. R. Ade,
Simone Aiola,
Tommy Alford,
Mandana Amiri,
Stefania Amodeo,
Rui An,
Zachary Atkins,
Jason E. Austermann,
Nicholas Battaglia,
Elia Stefano Battistelli,
James A. Beall,
Rachel Bean,
Benjamin Beringue,
Tanay Bhandarkar,
Emily Biermann,
Boris Bolliet,
J Richard Bond,
Hongbo Cai,
Erminia Calabrese
, et al. (133 additional authors not shown)
Abstract:
We present new measurements of cosmic microwave background (CMB) lensing over $9400$ sq. deg. of the sky. These lensing measurements are derived from the Atacama Cosmology Telescope (ACT) Data Release 6 (DR6) CMB dataset, which consists of five seasons of ACT CMB temperature and polarization observations. We determine the amplitude of the CMB lensing power spectrum at $2.3\%$ precision ($43σ$ sign…
▽ More
We present new measurements of cosmic microwave background (CMB) lensing over $9400$ sq. deg. of the sky. These lensing measurements are derived from the Atacama Cosmology Telescope (ACT) Data Release 6 (DR6) CMB dataset, which consists of five seasons of ACT CMB temperature and polarization observations. We determine the amplitude of the CMB lensing power spectrum at $2.3\%$ precision ($43σ$ significance) using a novel pipeline that minimizes sensitivity to foregrounds and to noise properties. To ensure our results are robust, we analyze an extensive set of null tests, consistency tests, and systematic error estimates and employ a blinded analysis framework. The baseline spectrum is well fit by a lensing amplitude of $A_{\mathrm{lens}}=1.013\pm0.023$ relative to the Planck 2018 CMB power spectra best-fit $Λ$CDM model and $A_{\mathrm{lens}}=1.005\pm0.023$ relative to the $\text{ACT DR4} + \text{WMAP}$ best-fit model. From our lensing power spectrum measurement, we derive constraints on the parameter combination $S^{\mathrm{CMBL}}_8 \equiv σ_8 \left({Ω_m}/{0.3}\right)^{0.25}$ of $S^{\mathrm{CMBL}}_8= 0.818\pm0.022$ from ACT DR6 CMB lensing alone and $S^{\mathrm{CMBL}}_8= 0.813\pm0.018$ when combining ACT DR6 and Planck NPIPE CMB lensing power spectra. These results are in excellent agreement with $Λ$CDM model constraints from Planck or $\text{ACT DR4} + \text{WMAP}$ CMB power spectrum measurements. Our lensing measurements from redshifts $z\sim0.5$--$5$ are thus fully consistent with $Λ$CDM structure growth predictions based on CMB anisotropies probing primarily $z\sim1100$. We find no evidence for a suppression of the amplitude of cosmic structure at low redshifts
△ Less
Submitted 28 May, 2024; v1 submitted 11 April, 2023;
originally announced April 2023.
-
MKID, an energy sensitive superconducting detector for the next generation of XAO
Authors:
Aurelie Magniez,
Lisa Bardou,
Tim Morris,
Kieran O'Brien
Abstract:
Selected for the next generation of adaptive optics (AO) systems, the pyramid wavefront sensor (PWFS) is recognised for its closed AO loop performance. As new technologies are emerging, it is necessary to explore new methods to improve it. Microwave Kinetic Inductance Detectors (MKID) are photon-counting devices that measure the arrival time and energy of each incident photon, providing new capabi…
▽ More
Selected for the next generation of adaptive optics (AO) systems, the pyramid wavefront sensor (PWFS) is recognised for its closed AO loop performance. As new technologies are emerging, it is necessary to explore new methods to improve it. Microwave Kinetic Inductance Detectors (MKID) are photon-counting devices that measure the arrival time and energy of each incident photon, providing new capabilities over existing detectors and significant AO performance benefits. After develo** a multi-wavelength PWFS simulation, we study the benefits of using an energy sensitive detector, analyse the PWFS performance according to wavelength and explore the possibility of using fainter natural guide stars by widening the bandpass of the wavefront sensor.
△ Less
Submitted 23 September, 2022;
originally announced September 2022.
-
Towards virtual access of adaptive optics telemetry data
Authors:
Tiago Gomes,
Carlos Correia,
Lisa Bardou,
Olivier Beltramo-Martin,
Thierry Fusco,
Caroline Kulcsár,
Timothy Morris,
Nuno Morujão,
Benoît Neichel,
James Osborn,
Paulo Garcia
Abstract:
Large amounts of Adaptive-Optics (AO) control loop data and telemetry are currently inaccessible to end-users. Broadening access to those data has the potential to change the AO landscape on many fronts, addressing several use-cases such as derivation of the system's PSF, turbulence characterisation and optimisation of system control. We address one of the biggest obstacles to sharing these data:…
▽ More
Large amounts of Adaptive-Optics (AO) control loop data and telemetry are currently inaccessible to end-users. Broadening access to those data has the potential to change the AO landscape on many fronts, addressing several use-cases such as derivation of the system's PSF, turbulence characterisation and optimisation of system control. We address one of the biggest obstacles to sharing these data: the lack of standardisation, which hinders access. We propose an object-oriented Python package for AO telemetry, whose data model abstracts the user from an underlining archive-ready data exchange standard based on the Flexible Image Transport System (FITS). Its design supports data from a wide range of existing and future AO systems, either in raw format or abstracted from actual instrument details. We exemplify its usage with data from active AO systems on 10m-class observatories, of which two are currently supported (AOF and Keck), with plans for more.
△ Less
Submitted 28 July, 2022;
originally announced July 2022.
-
The Atacama Cosmology Telescope: The Persistence of Neutrino Self-Interaction in Cosmological Measurements
Authors:
Christina D. Kreisch,
Minsu Park,
Erminia Calabrese,
Francis-Yan Cyr-Racine,
Rui An,
J. Richard Bond,
Olivier Dore,
Jo Dunkley,
Patricio Gallardo,
Vera Gluscevic,
J. Colin Hill,
Adam D. Hincks,
Mathew S. Madhavacheril,
Jeff McMahon,
Kavilan Moodley,
Thomas W. Morris,
Federico Nati,
Lyman A. Page,
Bruce Partridge,
Maria Salatino,
Cristobal Sifon,
David N. Spergel,
Cristian Vargas,
Edward J. Wollack
Abstract:
We use data from the Atacama Cosmology Telescope (ACT) DR4 to search for the presence of neutrino self-interaction in the cosmic microwave background. Consistent with prior works, the posterior distributions we find are bimodal, with one mode consistent with $Λ$CDM and one where neutrinos strongly self-interact. By combining ACT data with large-scale information from WMAP, we find that a delayed o…
▽ More
We use data from the Atacama Cosmology Telescope (ACT) DR4 to search for the presence of neutrino self-interaction in the cosmic microwave background. Consistent with prior works, the posterior distributions we find are bimodal, with one mode consistent with $Λ$CDM and one where neutrinos strongly self-interact. By combining ACT data with large-scale information from WMAP, we find that a delayed onset of neutrino free streaming caused by significantly strong neutrino self-interaction is compatible with these data at the $2-3σ$ level. As seen in the past, the preference shifts to $Λ$CDM with the inclusion of Planck data. We determine that the preference for strong neutrino self-interaction is largely driven by angular scales corresponding to $700 \lesssim \ell \lesssim 1000$ in the ACT E-mode polarization data. This region is expected to be key to discriminate between neutrino self-interacting modes and will soon be probed with more sensitive data.
△ Less
Submitted 7 August, 2022; v1 submitted 7 July, 2022;
originally announced July 2022.
-
The Atacama Cosmology Telescope: Modeling Bulk Atmospheric Motion
Authors:
Thomas W. Morris,
Ricardo Bustos,
Erminia Calabrese,
Steve K. Choi,
Adriaan J. Duivenvoorden,
Jo Dunkley,
Rolando Dünner,
Patricio A. Gallardo,
Matthew Hasselfield,
Adam D. Hincks,
Tony Mroczkowski,
Sigurd Naess,
Michael D. Niemack,
Lyman A. Page,
Bruce Partridge,
Maria Salatino,
Suzanne T. Staggs,
Jesse Treu,
Edward J. Wollack,
Zhilei Xu
Abstract:
Fluctuating atmospheric emission is a dominant source of noise for ground-based millimeter-wave observations of the CMB temperature anisotropy at angular scales $\gtrsim 0.5^{\circ}$. We present a model of the atmosphere as a discrete set of emissive turbulent layers that move with respect to the observer with a horizontal wind velocity. After introducing a statistic derived from the time-lag depe…
▽ More
Fluctuating atmospheric emission is a dominant source of noise for ground-based millimeter-wave observations of the CMB temperature anisotropy at angular scales $\gtrsim 0.5^{\circ}$. We present a model of the atmosphere as a discrete set of emissive turbulent layers that move with respect to the observer with a horizontal wind velocity. After introducing a statistic derived from the time-lag dependent correlation function for detector pairs in an array, referred to as the pair-lag, we use this model to estimate the aggregate angular motion of the atmosphere derived from time-ordered data from the Atacama Cosmology Telescope (ACT). We find that estimates derived from ACT's CMB observations alone agree with those derived from satellite weather data that additionally include a height-dependent horizontal wind velocity and water vapor density. We also explore the dependence of the measured atmospheric noise spectrum on the relative angle between the wind velocity and the telescope scan direction. In particular, we find that varying the scan velocity changes the noise spectrum in a predictable way. Computing the pair-lag statistic opens up new avenues for understanding how atmospheric fluctuations impact measurements of the CMB anisotropy.
△ Less
Submitted 1 November, 2021;
originally announced November 2021.
-
HiPERCAM: a quintuple-beam, high-speed optical imager on the 10.4-m Gran Telescopio Canarias
Authors:
V. S. Dhillon,
N. Bezawada,
M. Black,
S. D. Dixon,
T. Gamble,
X. Gao,
D. M. Henry,
P. Kerry,
S. P. Littlefair,
D. W. Lunney,
T. R. Marsh,
C. Miller,
S. G. Parsons,
R. P. Ashley,
E. Breedt,
A. Brown,
M. J. Dyer,
M. J. Green,
I. Pelisoli,
D. I. Sahman,
J. Wild,
D. J. Ives,
L. Mehrgan,
J. Stegmeier,
C. M. Dubbeldam
, et al. (14 additional authors not shown)
Abstract:
HiPERCAM is a portable, quintuple-beam optical imager that saw first light on the 10.4-m Gran Telescopio Canarias (GTC) in 2018. The instrument uses re-imaging optics and 4 dichroic beamsplitters to record $u_s g_s r_s i_s z_s$ ($320-1060$ nm) images simultaneously on its five CCD cameras, each of 3.1 arcmin (diagonal) field of view. The detectors in HiPERCAM are frame-transfer devices cooled ther…
▽ More
HiPERCAM is a portable, quintuple-beam optical imager that saw first light on the 10.4-m Gran Telescopio Canarias (GTC) in 2018. The instrument uses re-imaging optics and 4 dichroic beamsplitters to record $u_s g_s r_s i_s z_s$ ($320-1060$ nm) images simultaneously on its five CCD cameras, each of 3.1 arcmin (diagonal) field of view. The detectors in HiPERCAM are frame-transfer devices cooled thermo-electrically to 183 K, thereby allowing both long-exposure, deep imaging of faint targets, as well as high-speed (over 1000 windowed frames per second) imaging of rapidly varying targets. A comparison-star pick-off system in the telescope focal plane increases the effective field of view to 6.7 arcmin for differential photometry. Combining HiPERCAM with the world's largest optical telescope enables the detection of astronomical sources to $g_s \sim 23$ in 1 s and $g_s \sim 28$ in 1 h. In this paper we describe the scientific motivation behind HiPERCAM, present its design, report on its measured performance, and outline some planned enhancements.
△ Less
Submitted 21 July, 2021;
originally announced July 2021.
-
On-sky results for the novel integrated micro-lens ring tip-tilt sensor
Authors:
Philipp Hottinger,
Robert J. Harris,
Jonathan Crass,
Philipp-Immanuel Dietrich,
Matthias Blaicher,
Andrew Bechter,
Brian Sands,
Tim J. Morris,
Alastair G. Basden,
Nazim Ali Bharmal,
Jochen Heidt,
Theodoros Anagnos,
Philip L. Neureuther,
Martin Glück,
Jennifer Power,
Jörg-Uwe Pott,
Christian Koos,
Oliver Sawodny,
Andreas Quirrenbach
Abstract:
We present the first on-sky results of the micro-lens ring tip-tilt (MLR-TT) sensor. This sensor utilizes a 3D printed micro-lens ring feeding six multi-mode fibers to sense misaligned light, allowing centroid reconstruction. A tip-tilt mirror allows the beam to be corrected, increasing the amount of light coupled into a centrally positioned single-mode (science) fiber. The sensor was tested with…
▽ More
We present the first on-sky results of the micro-lens ring tip-tilt (MLR-TT) sensor. This sensor utilizes a 3D printed micro-lens ring feeding six multi-mode fibers to sense misaligned light, allowing centroid reconstruction. A tip-tilt mirror allows the beam to be corrected, increasing the amount of light coupled into a centrally positioned single-mode (science) fiber. The sensor was tested with the iLocater acquisition camera at the Large Binocular Telescope in November 2019. The limit on the maximum achieved root mean square reconstruction accuracy was found to be 0.19 $λ$/D in both tip and tilt, of which approximately 50% of the power originates at frequencies below 10 Hz. We show the reconstruction accuracy is highly dependent on the estimated Strehl ratio and simulations support the assumption that residual adaptive optics aberrations are the main limit to the reconstruction accuracy. We conclude that this sensor is ideally suited to remove post-adaptive optics non-common path tip tilt residuals. We discuss the next steps for the concept development, including optimizations of the lens and fiber, tuning of the correction algorithm and selection of optimal science cases.
△ Less
Submitted 18 June, 2021;
originally announced June 2021.
-
MOSAIC: the high-multiplex and multi-IFU spectrograph for the ELT
Authors:
Rubén Sánchez-Janssen,
Francois Hammer,
Simon Morris,
Jean-Gabriel Cuby,
Lex Kaper,
Matthias Steinmetz,
Jose Afonso,
Beatriz Barbuy,
Edwin Bergin,
Alexis Finoguenov,
Jesús Gallego,
Susan Kassin,
Christopher Miller,
Goran Östlin,
Laura Pentericci,
Daniel Schaerer,
Bodo Ziegler,
Fanny Chemla,
Gavin Dalton,
Fatima De Frondat,
Chris Evans,
David Le Mignant,
Mathieu Puech,
Myriam Rodrigues,
Sylvestre Taburet
, et al. (18 additional authors not shown)
Abstract:
MOSAIC is the planned multi-object spectrograph for the 39m Extremely Large Telescope (ELT). Conceived as a multi-purpose instrument, it offers both high multiplex and multi-IFU capabilities at a range of intermediate to high spectral resolving powers in the visible and the near-infrared. MOSAIC will enable unique spectroscopic surveys of the faintest sources, from the oldest stars in the Galaxy a…
▽ More
MOSAIC is the planned multi-object spectrograph for the 39m Extremely Large Telescope (ELT). Conceived as a multi-purpose instrument, it offers both high multiplex and multi-IFU capabilities at a range of intermediate to high spectral resolving powers in the visible and the near-infrared. MOSAIC will enable unique spectroscopic surveys of the faintest sources, from the oldest stars in the Galaxy and beyond to the first populations of galaxies that completed the reionisation of the Universe--while simultaneously opening up a wide discovery space. In this contribution we present the status of the instrument ahead of Phase B, showcasing the key science cases as well as introducing the updated set of top level requirements and the adopted architecture. The high readiness level will allow MOSAIC to soon enter the construction phase, with the goal to provide the ELT community with a world-class MOS capability as soon as possible after the telescope first light.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
HIRES, the high-resolution spectrograph for the ELT
Authors:
Alessandro Marconi,
Manuel Abreu,
Vardan Adibekyan,
Matteo Aliverti,
Carlos Allende Prieto,
Pedro J. Amado,
Manuel Amate,
Etienne Artigau,
Sergio R. Augusto,
Susana Barros,
Santiago Becerril,
Bjorn Benneke,
Edwin Bergin,
Philippe Berio,
Naidu Bezawada,
Isabelle Boisse,
Xavier Bonfils,
Francois Bouchy,
Christopher Broeg,
Alexandre Cabral,
Rocio Calvo-Ortega,
Bruno Leonardo Canto Martins,
Bruno Chazelas,
Andrea Chiavassa,
Lise B. Christensen
, et al. (77 additional authors not shown)
Abstract:
HIRES will be the high-resolution spectrograph of the European Extremely Large Telescope at optical and near-infrared wavelengths. It consists of three fibre-fed spectrographs providing a wavelength coverage of 0.4-1.8 mic (goal 0.35-1.8 mic) at a spectral resolution of ~100,000. The fibre-feeding allows HIRES to have several, interchangeable observing modes including a SCAO module and a small dif…
▽ More
HIRES will be the high-resolution spectrograph of the European Extremely Large Telescope at optical and near-infrared wavelengths. It consists of three fibre-fed spectrographs providing a wavelength coverage of 0.4-1.8 mic (goal 0.35-1.8 mic) at a spectral resolution of ~100,000. The fibre-feeding allows HIRES to have several, interchangeable observing modes including a SCAO module and a small diffraction-limited IFU in the NIR. Therefore, it will be able to operate both in seeing and diffraction-limited modes. ELT-HIRES has a wide range of science cases spanning nearly all areas of research in astrophysics and even fundamental physics. Some of the top science cases will be the detection of bio signatures from exoplanet atmospheres, finding the fingerprints of the first generation of stars (PopIII), tests on the stability of Nature's fundamental couplings, and the direct detection of the cosmic acceleration. The HIRES consortium is composed of more than 30 institutes from 14 countries, forming a team of more than 200 scientists and engineers.
△ Less
Submitted 24 November, 2020;
originally announced November 2020.
-
MOSAIC on the ELT: high-multiplex spectroscopy to unravel the physics of stars and galaxies from the dark ages to the present-day
Authors:
F. Hammer,
S. Morris,
J. G. Cuby,
L. Kaper,
M. Steinmetz,
J. Afonso,
B. Barbuy,
E. Bergin,
A. Finogenov,
J. Gallego,
S. Kassin,
C. Miller,
G. Ostlin,
L. Penterricci,
D. Schaerer,
B. Ziegler,
F. Chemla,
G. Dalton,
F. De Frondat,
C. Evans,
D. Le Mignant,
M. Puech,
M. Rodrigues,
R. Sanchez-Janssen,
S. Taburet
, et al. (14 additional authors not shown)
Abstract:
The powerful combination of the cutting-edge multi-object spectrograph MOSAIC with the world largest telescope, the ELT, will allow us to probe deeper into the Universe than was possible. MOSAIC is an extremely efficient instrument in providing spectra for the numerous faint sources in the Universe, including the very first galaxies and sources of cosmic reionization. MOSAIC has a high multiplex i…
▽ More
The powerful combination of the cutting-edge multi-object spectrograph MOSAIC with the world largest telescope, the ELT, will allow us to probe deeper into the Universe than was possible. MOSAIC is an extremely efficient instrument in providing spectra for the numerous faint sources in the Universe, including the very first galaxies and sources of cosmic reionization. MOSAIC has a high multiplex in the NIR and in the VIS, in addition to multi-Integral Field Units (Multi-IFUs) in NIR. As such it is perfectly suited to carry out an inventory of dark matter (from rotation curves) and baryons in the cool-warm gas phases in galactic haloes at z=3-4. MOSAIC will enable detailed maps of the intergalactic medium at z=3, the evolutionary history of dwarf galaxies during a Hubble time, the chemistry directly measured from stars up to several Mpc. Finally, it will measure all faint features seen in cluster gravitational lenses or in streams surrounding nearby galactic halos, providing MOSAIC to be a powerful instrument with an extremely large space of discoveries. The preliminary design of MOSAIC is expected to begin next year, and its level of readiness is already high, given the instrumental studies made by the team.
△ Less
Submitted 12 February, 2021; v1 submitted 6 November, 2020;
originally announced November 2020.
-
Diffraction-limited integral-field spectroscopy for extreme adaptive optics systems with the Multi-Core fiber-fed Integral-Field Unit
Authors:
Sebastiaan Y. Haffert,
Robert J. Harris,
Alessio Zanutta,
Fraser A. Pike,
Andrea Bianco,
Eduardo Redaelli,
Aurélien Benoît,
David G. MacLachlan,
Calum A. Ross,
Itandehui Gris-Sánchez,
Mareike D. Trappen,
Yilin Xu,
Matthias Blaicher,
Pascal Maier,
Giulio Riva,
Baptiste Sinquin,
Caroline Kulcsár,
Nazim Ali Bharmal,
Eric Gendron,
Lazar Staykov,
Tim J. Morris,
Santiago Barboza,
Norbert Muench,
Lisa Bardou,
Léonard Prengère
, et al. (9 additional authors not shown)
Abstract:
Direct imaging instruments have the spatial resolution to resolve exoplanets from their host star. This enables direct characterization of the exoplanets atmosphere, but most direct imaging instruments do not have spectrographs with high enough resolving power for detailed atmospheric characterization. We investigate the use of a single-mode diffraction-limited integral-field unit that is compact…
▽ More
Direct imaging instruments have the spatial resolution to resolve exoplanets from their host star. This enables direct characterization of the exoplanets atmosphere, but most direct imaging instruments do not have spectrographs with high enough resolving power for detailed atmospheric characterization. We investigate the use of a single-mode diffraction-limited integral-field unit that is compact and easy to integrate into current and future direct imaging instruments for exoplanet characterization. This achieved by making use of recent progress in photonic manufacturing to create a single-mode fiber-fed image reformatter. The fiber-link is created with 3D printed lenses on top of a single-mode multi-core fiber that feeds an ultrafast laser inscribed photonic chip that reformats the fiber into a pseudo-slit. We then couple it to a first-order spectrograph with a triple stacked volume phase holographic grating for a high efficiency over a large bandwidth. The prototype system has had a successful first-light observing run at the 4.2 meter William Herschel Telescope. The measured on-sky resolving power is between 2500 and 3000, depending on the wavelength. With our observations we show that single-mode integral-field spectroscopy is a viable option for current and future exoplanet imaging instruments.
△ Less
Submitted 8 September, 2020;
originally announced September 2020.
-
Wavefront prediction using artificial neural networks for open-loop Adaptive Optics
Authors:
Xuewen Liu,
Tim Morris,
Chris Saunter,
Francisco Javier de Cos Juez,
Carlos González-Gutiérrez,
Lisa Bardou
Abstract:
Latency in the control loop of adaptive optics (AO) systems can severely limit performance. Under the frozen flow hypothesis linear predictive control techniques can overcome this, however identification and tracking of relevant turbulent parameters (such as wind speeds) is required for such parametric techniques. This can complicate practical implementations and introduce stability issues when en…
▽ More
Latency in the control loop of adaptive optics (AO) systems can severely limit performance. Under the frozen flow hypothesis linear predictive control techniques can overcome this, however identification and tracking of relevant turbulent parameters (such as wind speeds) is required for such parametric techniques. This can complicate practical implementations and introduce stability issues when encountering variable conditions. Here we present a nonlinear wavefront predictor using a Long Short-Term Memory (LSTM) artificial neural network (ANN) that assumes no prior knowledge of the atmosphere and thus requires no user input. The ANN is designed to predict the open-loop wavefront slope measurements of a Shack-Hartmann wavefront sensor (SH-WFS) one frame in advance to compensate for a single-frame delay in a simulated $7\times7$ single-conjugate adaptive optics (SCAO) system operating at 150 Hz. We describe how the training regime of the LSTM ANN affects prediction performance and show how the performance of the predictor varies under various guide star magnitudes. We show that the prediction remains stable when both wind speed and direction are varying. We then extend our approach to a more realistic two-frame latency system. AO system performance when using the LSTM predictor is enhanced for all simulated conditions with prediction errors within 19.9 to 40.0 nm RMS of a latency-free system operating under the same conditions compared to a bandwidth error of $78.3\pm4.4$ nm RMS.
△ Less
Submitted 28 May, 2020;
originally announced May 2020.
-
Limitations imposed by optical turbulence profile structure and evolution on tomographic reconstruction for the ELT
Authors:
O. J. D. Farley,
J. Osborn,
T. Morris,
T. Fusco,
B. Neichel,
C. Correia,
R. W. Wilson
Abstract:
The performance of tomographic adaptive optics systems is intrinsically linked to the vertical profile of optical turbulence. Firstly, a sufficient number of discrete turbulent layers must be reconstructed to model the true continuous turbulence profile. Secondly over the course of an observation, the profile as seen by the telescope changes and the tomographic reconstructor must be updated. These…
▽ More
The performance of tomographic adaptive optics systems is intrinsically linked to the vertical profile of optical turbulence. Firstly, a sufficient number of discrete turbulent layers must be reconstructed to model the true continuous turbulence profile. Secondly over the course of an observation, the profile as seen by the telescope changes and the tomographic reconstructor must be updated. These changes can be due to the unpredictable evolution of turbulent layers on meteorological timescales as short as minutes. Here we investigate the effect of changing atmospheric conditions on the quality of tomographic reconstruction by coupling fast analytical adaptive optics simulation to a large database of 10 691 high resolution turbulence profiles measured over two years by the Stereo-SCIDAR instrument at ESO Paranal, Chile. This work represents the first investigation of these effects with a large, statistically significant sample of turbulence profiles. The statistical nature of the study allows us to assess not only the degradation and variability in tomographic error with a set of system parameters (e.g. number of layers, temporal update period) but also the required parameters to meet some error threshold. In the most challenging conditions where the profile is rapidly changing, these parameters must be far more tightly constrained in order to meet this threshold. By providing estimates of these constraints for a wide range of system geometries as well as the impact of different temporal optimisation strategies we may assist the designers of tomographic AO for the ELT to dimension their systems.
△ Less
Submitted 17 March, 2020;
originally announced March 2020.
-
Focal Plane Tip-Tilt Sensing for Improved Single-Mode Fiber Coupling using a 3D-printed Microlens-Ring
Authors:
Philipp Hottinger,
Robert J. Harris,
Philipp-Immanuel Dietrich,
Matthias Blaicher,
Andrew Bechter,
Jonathan Crass,
Martin Glück,
Jörg-Uwe Pott,
Nazim A. Bharmal,
Alastair Basden,
Tim J. Morris,
Christian Koos,
Oliver Sawodny,
Andreas Quirrenbach
Abstract:
Modern extreme adaptive optics (AO) systems achieving diffraction-limited performance open up new possibilities for instrumentation. Especially important for the fields of spectroscopy and interferometry is that it enables the prospect to couple light into single-mode fibers (SMFs). However, due to their small size, efficient coupling is very sensitive to the quality of the fiber alignment, beam d…
▽ More
Modern extreme adaptive optics (AO) systems achieving diffraction-limited performance open up new possibilities for instrumentation. Especially important for the fields of spectroscopy and interferometry is that it enables the prospect to couple light into single-mode fibers (SMFs). However, due to their small size, efficient coupling is very sensitive to the quality of the fiber alignment, beam drifts and higher-frequency tip-tilt aberrations caused by telescope mechanics and vibrations. These residual aberrations are not always sensed and corrected by the AO system, leading to unacceptable losses. This is particularly severe for the Extremely Large Telescopes, where their huge structure will mean vibrations increase and optimal AO solutions are even more difficult to implement. We have created a focal plane sensor to correct for residual aberrations by surrounding the SMF with six Multi-mode fibers (MMFs). On each of the MMFs sits a printed freeform lens, making up a six-element micro-lens ring to refract the light into these surrounding MMFs and thus minimizing light loss in the gap between the fiber cores. This means when the beam is near diffraction limited and centered almost all light couples to the SMF. When the beam is misaligned, it couples to the surrounding cores, which are read out by a detector and processed by the DARC software driving a tip-tilt mirror. Currently we are aiming to detect and correct only tip-tilt aberrations. However, choosing to surround the central fiber with six sensing locations potentially allows us to investigate higher order correction modes. Here we present the design and performance our prototype system. This has been designed for use with the iLocater fiber injection system at the LBT and can easily be scaled to larger telescopes. We present test results from the KOOL laboratory and initial integration with the iLocater instrument.
△ Less
Submitted 19 December, 2019;
originally announced December 2019.
-
Identifying optical turbulence profiles for realistic tomographic error in adaptive optics
Authors:
O. J. D. Farley,
J. Osborn,
T. Morris,
T. Fusco,
B. Neichel,
C. Correia,
R. W. Wilson
Abstract:
For extremely large telescopes, adaptive optics will be required to correct the Earth's turbulent atmosphere. The performance of tomographic adaptive optics is strongly dependent on the vertical distribution (profile) of this turbulence. An important way in which this manifests is the tomographic error, arising from imperfect measurement and reconstruction of the turbulent phase at altitude. Conve…
▽ More
For extremely large telescopes, adaptive optics will be required to correct the Earth's turbulent atmosphere. The performance of tomographic adaptive optics is strongly dependent on the vertical distribution (profile) of this turbulence. An important way in which this manifests is the tomographic error, arising from imperfect measurement and reconstruction of the turbulent phase at altitude. Conventionally, a small number of reference profiles are used to obtain this error in simulation however these profiles are not constructed to be representative in terms of tomographic error. It is therefore unknown whether these simulations are providing realistic performance estimates. Here, we employ analytical adaptive optics simulation that drastically reduces computation times to compute tomographic error for 10 691 measurements of the turbulence profile gathered by the Stereo-SCIDAR instrument at ESO Paranal. We assess for the first time the impact of the profile on tomographic error in a statistical manner. We find, in agreement with previous work, that the tomographic error is most directly linked with the distribution of turbulence into discrete, stratified layers. Reference profiles are found to provide mostly higher tomographic error than expected, which we attribute to the fact that these profiles are primarily composed of averages of many measurements resulting in unrealistic, continuous distributions of turbulence. We propose that a representative profile should be defined with respect to a particular system, and that as such simulations with a large statistical sample of profiles must be an important step in the design process.
△ Less
Submitted 8 June, 2019;
originally announced June 2019.
-
Efficient implementation of pseudo open loop control for adaptive optics on Extremely Large Telescopes
Authors:
Alastair Basden,
David Jenkins,
Tim Morris,
James Osborn,
Matthew Townson
Abstract:
Closed-loop adaptive optics systems which use minimum mean square error wavefront reconstruction require the computation of pseudo open loop wavefront slopes. These techniques incorporate a knowledge of atmospheric statistics which must therefore be represented within the wavefront slope measurements. These pseudo open loop slopes are computed from the sum of the measured residual slopes and the r…
▽ More
Closed-loop adaptive optics systems which use minimum mean square error wavefront reconstruction require the computation of pseudo open loop wavefront slopes. These techniques incorporate a knowledge of atmospheric statistics which must therefore be represented within the wavefront slope measurements. These pseudo open loop slopes are computed from the sum of the measured residual slopes and the reconstructed slopes that would be given if the deformable mirror was flat, generally involving the multiplication of an interaction matrix with actuator demands from the previous time-step. When using dense algebra, this multiplication is computationally expensive for Extremely Large Telescopes, requiring a large memory bandwidth. Here we show that this requirement can be significantly reduced, maintaining mathematical correctness and significantly reducing system complexity. This therefore reduces the cost of these systems and increases robustness and reliability.
△ Less
Submitted 28 March, 2019;
originally announced March 2019.
-
Optimizing the accuracy and efficiency of optical turbulence profiling using adaptive optics telemetry for extremely large telescopes
Authors:
Douglas J Laidlaw,
James Osborn,
Timothy J Morris,
Alastair G Basden,
Olivier Beltramo-Martin,
Timothy Butterley,
Eric Gendron,
Andrew P Reeves,
Gérard Rousset,
Matthew J Townson,
Richard W Wilson
Abstract:
Advanced adaptive optics (AO) instruments on ground-based telescopes require accurate knowledge of the atmospheric turbulence strength as a function of altitude. This information assists point spread function reconstruction, AO temporal control techniques and is required by wide-field AO systems to optimize the reconstruction of an observed wavefront. The variability of the atmosphere makes it imp…
▽ More
Advanced adaptive optics (AO) instruments on ground-based telescopes require accurate knowledge of the atmospheric turbulence strength as a function of altitude. This information assists point spread function reconstruction, AO temporal control techniques and is required by wide-field AO systems to optimize the reconstruction of an observed wavefront. The variability of the atmosphere makes it important to have a measure of the optical turbulence profile in real time. This measurement can be performed by fitting an analytically generated covariance matrix to the cross-covariance of Shack-Hartmann wavefront sensor (SHWFS) centroids. In this study we explore the benefits of reducing cross-covariance data points to a covariance map region of interest (ROI). A technique for using the covariance map ROI to measure and compensate for SHWFS misalignments is also introduced. We compare the accuracy of covariance matrix and map ROI optical turbulence profiling using both simulated and on-sky data from CANARY, an AO demonstrator on the 4.2 m William Herschel telescope, La Palma. On-sky CANARY results are compared to contemporaneous profiles from Stereo-SCIDAR - a dedicated high-resolution optical turbulence profiler. It is shown that the covariance map ROI optimizes the accuracy of AO telemetry optical turbulence profiling. In addition, we show that the covariance map ROI reduces the fitting time for an extremely large telescope-scale system by a factor of 72. The software package we developed to collect all of the presented results is now open source.
△ Less
Submitted 17 January, 2019;
originally announced January 2019.
-
Demonstration of a photonic lantern low order wavefront sensor using an adaptive optics testbed
Authors:
Mark K. Corrigan,
Timothy J. Morris,
Robert J. Harris,
Theodoros Anagnos
Abstract:
We demonstrate the use of an optimized 5 core photonic lantern (PL) to simultaneously measure tip/tilt errors at the telescope focal plane, while also providing the input to an instrument. By replacing a single mode (SM) fiber with the PL we show that it is possible to stabilize the input PSF to an instrument due to non-common path tip/tilt aberrations in an adaptive optics system. We show the PL…
▽ More
We demonstrate the use of an optimized 5 core photonic lantern (PL) to simultaneously measure tip/tilt errors at the telescope focal plane, while also providing the input to an instrument. By replacing a single mode (SM) fiber with the PL we show that it is possible to stabilize the input PSF to an instrument due to non-common path tip/tilt aberrations in an adaptive optics system. We show the PL in two different regimes, (i) using only the outer cores for tip/tilt measurements while feeding an instrument with the central core and, (ii) using all cores to measure tip/tilt when used in an instrument such as a spectrograph. In simulations our PL displays the ability to retrieve tip/tilt measurements in a linear range of +/- 55 milliarcseconds. At the designed central wavelength of 1.55 microns, configuration (i) matches the throughput of an on-axis SM fiber but declines as we move away from this wavelength. In configuration (ii) we make use of the whole multimode input of the PL resulting in a potential increase of overall throughput compared to a SM fiber, while eliminating modal noise.
△ Less
Submitted 21 September, 2018;
originally announced September 2018.
-
Representative optical turbulence profiles for ESO Paranal by hierarchical clustering
Authors:
O. J. D. Farley,
J. Osborn,
T. Morris,
M. Sarazin,
T. Butterley,
M. J. Townson,
P. Jia,
R. W. Wilson
Abstract:
Knowledge of the optical turbulence profile is important in adaptive optics (AO) systems, particularly tomographic AO systems such as those to be employed by the next generation of 40 m class extremely large telescopes (ELTs). Site characterisation and monitoring campaigns have produced large quantities of turbulence profiling data for sites around the world. However AO system design and performan…
▽ More
Knowledge of the optical turbulence profile is important in adaptive optics (AO) systems, particularly tomographic AO systems such as those to be employed by the next generation of 40 m class extremely large telescopes (ELTs). Site characterisation and monitoring campaigns have produced large quantities of turbulence profiling data for sites around the world. However AO system design and performance characterisation is dependent on Monte-Carlo simulations that cannot make use of these large datasets due to long computation times. Here we address the question of how to reduce these large datasets into small sets of profiles that can feasibly be used in such Monte-Carlo simulations, whilst minimising the loss of information inherent in this effective compression of the data. We propose hierarchical clustering to partition the dataset according to the structure of the turbulence profiles and extract a single profile from each cluster. This method is applied to the Stereo-SCIDAR dataset from ESO Paranal containing over 10000 measurements of the turbulence profile from 83 nights. We present two methods of extracting turbulence profiles from the clusters, resulting in two sets of 18 profiles providing subtly different descriptions of the variability across the entire dataset. For generality we choose integrated parameters of the turbulence to measure the representativeness of our profiles and compare to others. Using these criterion we also show that such variability is difficult to capture with small sets of profiles associated with integrated turbulence parameters such as seeing.
△ Less
Submitted 20 September, 2018;
originally announced September 2018.
-
Optimizing astrophotonic spatial reformatters using simulated on-sky performance
Authors:
Theodoros Anagnos,
Robert J. Harris,
Mark K. Corrigan,
Andrew P. Reeves,
Matthew J. Townson,
David G. MacLachlan,
Robert R. Thomson,
Tim J. Morris,
Christian Schwab,
Andreas Quirrenbach
Abstract:
One of the most useful techniques in astronomical instrumentation is image slicing. It enables a spectrograph to have a more compact angular slit, whilst retaining throughput and increasing resolving power. Astrophotonic components like the photonic lanterns and photonic reformatters can be used to replace bulk optics used so far. This study investigates the performance of such devices using end-t…
▽ More
One of the most useful techniques in astronomical instrumentation is image slicing. It enables a spectrograph to have a more compact angular slit, whilst retaining throughput and increasing resolving power. Astrophotonic components like the photonic lanterns and photonic reformatters can be used to replace bulk optics used so far. This study investigates the performance of such devices using end-to-end simulations to approximate realistic on-sky conditions. It investigates existing components, tries to optimize their performance and aims to understand better how best to design instruments to maximize their performance. This work complements the recent work in the field and provides an estimation for the performance of the new components.
△ Less
Submitted 17 July, 2018;
originally announced July 2018.
-
The ELT-MOS (MOSAIC): towards the construction phase
Authors:
Simon Morris,
François Hammer,
Pascal Jagourel,
Christopher J. Evans,
Mathieu Puech,
Gavin B. Dalton,
Myriam Rodrigues,
Ruben Sanchez-Janssen,
Ewan Fitzsimons,
Beatriz Barbuy,
Jean-Gabriel Cuby,
Lex Kaper,
Martin Roth,
Gérard Rousset,
Richard Myers,
Olivier Le Fèvre,
Alexis Finogenov,
Jari Kotilainen,
Bruno Castilho,
Goran Ostlin,
Sofia Feltzing,
Andreas Korn,
Jesus Gallego,
África Castillo Morales,
Jorge Iglesias-Páramo
, et al. (28 additional authors not shown)
Abstract:
When combined with the huge collecting area of the ELT, MOSAIC will be the most effective and flexible Multi-Object Spectrograph (MOS) facility in the world, having both a high multiplex and a multi-Integral Field Unit (Multi-IFU) capability. It will be the fastest way to spectroscopically follow-up the faintest sources, probing the reionisation epoch, as well as evaluating the evolution of the dw…
▽ More
When combined with the huge collecting area of the ELT, MOSAIC will be the most effective and flexible Multi-Object Spectrograph (MOS) facility in the world, having both a high multiplex and a multi-Integral Field Unit (Multi-IFU) capability. It will be the fastest way to spectroscopically follow-up the faintest sources, probing the reionisation epoch, as well as evaluating the evolution of the dwarf mass function over most of the age of the Universe. MOSAIC will be world-leading in generating an inventory of both the dark matter (from realistic rotation curves with MOAO fed NIR IFUs) and the cool to warm-hot gas phases in z=3.5 galactic haloes (with visible wavelenth IFUs). Galactic archaeology and the first massive black holes are additional targets for which MOSAIC will also be revolutionary. MOAO and accurate sky subtraction with fibres have now been demonstrated on sky, removing all low Technical Readiness Level (TRL) items from the instrument. A prompt implementation of MOSAIC is feasible, and indeed could increase the robustness and reduce risk on the ELT, since it does not require diffraction limited adaptive optics performance. Science programmes and survey strategies are currently being investigated by the Consortium, which is also ho** to welcome a few new partners in the next two years.
△ Less
Submitted 9 July, 2018; v1 submitted 2 July, 2018;
originally announced July 2018.
-
First light with HiPERCAM on the GTC
Authors:
Vikram Dhillon,
Simon Dixon,
Trevor Gamble,
Paul Kerry,
Stuart Littlefair,
Steven Parsons,
Thomas Marsh,
Naidu Bezawada,
Martin Black,
Xiaofeng Gao,
David Henry,
David Lunney,
Christopher Miller,
Marc Dubbeldam,
Timothy Morris,
James Osborn,
Richard Wilson,
Jorge Casares,
Teo Munoz-Darias,
Enric Palle,
Pablo Rodriguez-Gil,
Tariq Shahbaz,
Antonio de Ugarte Postigo
Abstract:
HiPERCAM is a quintuple-beam imager that saw first light on the 4.2m William Herschel Telescope (WHT) in October 2017 and on the 10.4m Gran Telescopio Canarias (GTC) in February 2018. The instrument uses re-imaging optics and 4 dichroic beamsplitters to record ugriz (300-1000nm) images simultaneously on its five CCD cameras. The detectors in HiPERCAM are frame-transfer devices cooled thermo-electr…
▽ More
HiPERCAM is a quintuple-beam imager that saw first light on the 4.2m William Herschel Telescope (WHT) in October 2017 and on the 10.4m Gran Telescopio Canarias (GTC) in February 2018. The instrument uses re-imaging optics and 4 dichroic beamsplitters to record ugriz (300-1000nm) images simultaneously on its five CCD cameras. The detectors in HiPERCAM are frame-transfer devices cooled thermo-electrically to -90degC, thereby allowing both long-exposure, deep imaging of faint targets, as well as high-speed (over 1000 windowed frames per second) imaging of rapidly varying targets. In this paper, we report on the as-built design of HiPERCAM, its first-light performance on the GTC, and some of the planned future enhancements.
△ Less
Submitted 2 July, 2018;
originally announced July 2018.
-
Opto-mechanical designs for the HARMONI Adaptive Optics systems
Authors:
Kjetil Dohlen,
Timothy Morris,
Javier Piqueras Lopez,
Ariadna Calcines-Rosario,
Anne Costille,
Marc Dubbeldam,
Kacem El Hadi,
Thierry Fusco,
Marc Llored,
Benoit Neichel,
Sandrine Pascal,
Jean-Francois Sauvage,
Pascal Vola,
Fraser Clarke,
Hermine Schnetler,
Ian Bryson,
Niranjan Thatte
Abstract:
HARMONI is a visible and near-infrared integral field spectrograph equipped with two complementary adaptive optics systems, fully integrated within the instrument. A Single Conjugate AO (SCAO) system offers high performance for a limited sky coverage and a Laser Tomographic AO (LTAO) system provides AO correction with a very high sky-coverage. While the deformable mirror performing real-time corre…
▽ More
HARMONI is a visible and near-infrared integral field spectrograph equipped with two complementary adaptive optics systems, fully integrated within the instrument. A Single Conjugate AO (SCAO) system offers high performance for a limited sky coverage and a Laser Tomographic AO (LTAO) system provides AO correction with a very high sky-coverage. While the deformable mirror performing real-time correction of the atmospheric disturbances is located within the telescope itself, the instrument contains a suite of state-of-the-art and innovative wavefront sensor systems. Laser guide star sensors (LGSS) are located at the entrance of the instrument and fed by a dichroic beam splitter, while the various natural guide star sensors for LTAO and SCAO are located close to the science focal plane. We present opto-mechanical architecture and design at PDR level for these wavefront sensor systems.
△ Less
Submitted 29 June, 2018;
originally announced July 2018.
-
The adaptive optics modes for HARMONI: from Classical to Laser Assisted Tomographic AO
Authors:
B. Neichel,
T. Fusco,
J. -F. Sauvage,
C. Correia,
K. Dohlen,
K. El-Hadi,
L. Blanco,
N. Schwartz,
F. Clarke,
N. Thatte,
M. Tecza,
J. Paufique,
J. Vernet,
M. Le Louarn,
P. Hammersley,
J. -L. Gach,
S. Pascal,
P. Vola,
C. Petit,
J. -M. Conan,
A. Carlotti,
C. Verinaud,
H. Schnetler,
I. Bryson,
T. Morris
, et al. (3 additional authors not shown)
Abstract:
HARMONI is a visible and NIR integral field spectrograph, providing the E-ELT's core spectroscopic capability at first light. HARMONI will work at the diffraction limit of the E-ELT, thanks to a Classical and a Laser Tomographic AO system. In this paper, we present the system choices that have been made for these SCAO and LTAO modules. In particular, we describe the strategy developed for the diff…
▽ More
HARMONI is a visible and NIR integral field spectrograph, providing the E-ELT's core spectroscopic capability at first light. HARMONI will work at the diffraction limit of the E-ELT, thanks to a Classical and a Laser Tomographic AO system. In this paper, we present the system choices that have been made for these SCAO and LTAO modules. In particular, we describe the strategy developed for the different Wave-Front Sensors: pyramid for SCAO, the LGSWFS concept, the NGSWFS path, and the truth sensor capabilities. We present first potential implementations. And we asses the first system performance.
△ Less
Submitted 30 May, 2018;
originally announced May 2018.
-
Simulation and Optimization of an Astrophotonic Reformatter
Authors:
Th. Anagnos,
R. J. Harris,
M. K. Corrigan,
A. P. Reeves,
M. J. Townson,
D. G. MacLachlan,
R. R. Thomson,
T. J. Morris,
C. Schwab,
A. Quirrenbach
Abstract:
Image slicing is a powerful technique in astronomy. It allows the instrument designer to reduce the slit width of the spectrograph, increasing spectral resolving power whilst retaining throughput. Conventionally this is done using bulk optics, such as mirrors and prisms, however more recently astrophotonic components known as photonic lanterns (PLs) and photonic reformatters have also been used. T…
▽ More
Image slicing is a powerful technique in astronomy. It allows the instrument designer to reduce the slit width of the spectrograph, increasing spectral resolving power whilst retaining throughput. Conventionally this is done using bulk optics, such as mirrors and prisms, however more recently astrophotonic components known as photonic lanterns (PLs) and photonic reformatters have also been used. These devices reformat the multi-mode (MM) input light from a telescope into single-mode (SM) outputs, which can then be re-arranged to suit the spectrograph. The photonic dicer (PD) is one such device, designed to reduce the dependence of spectrograph size on telescope aperture and eliminate modal noise. We simulate the PD, by optimising the throughput and geometrical design using Soapy and BeamProp. The simulated device shows a transmission between 8 and 20 %, depending upon the type of adaptive optics (AO) correction applied, matching the experimental results well. We also investigate our idealised model of the PD and show that the barycentre of the slit varies only slightly with time, meaning that the modal noise contribution is very low when compared to conventional fibre systems. We further optimise our model device for both higher throughput and reduced modal noise. This device improves throughput by 6.4 % and reduces the movement of the slit output by 50%, further improving stability. This shows the importance of properly simulating such devices, including atmospheric effects. Our work complements recent work in the field and is essential for optimising future photonic reformatters.
△ Less
Submitted 2 May, 2018;
originally announced May 2018.
-
The Durham Adaptive Optics Simulation Platform (DASP): Current status
Authors:
Alastair Basden,
Nazim Bharmal,
David Jenkins,
Timothy Morris,
James Osborn,
Peng Jia,
Lazar Staykov
Abstract:
The Durham Adaptive Optics Simulation Platform (DASP) is a Monte-Carlo modelling tool used for the simulation of astronomical and solar adaptive optics systems. In recent years, this tool has been used to predict the expected performance of the forthcoming extremely large telescope adaptive optics systems, and has seen the addition of several modules with new features, including Fresnel optics pro…
▽ More
The Durham Adaptive Optics Simulation Platform (DASP) is a Monte-Carlo modelling tool used for the simulation of astronomical and solar adaptive optics systems. In recent years, this tool has been used to predict the expected performance of the forthcoming extremely large telescope adaptive optics systems, and has seen the addition of several modules with new features, including Fresnel optics propagation and extended object wavefront sensing. Here, we provide an overview of the features of DASP and the situations in which it can be used. Additionally, the user tools for configuration and control are described.
△ Less
Submitted 23 February, 2018;
originally announced February 2018.
-
On-sky demonstration of matched filters for wavefront measurements using ELT-scale elongated laser guide stars
Authors:
A. G. Basden,
L. Bardou,
D. Bonaccini Calia,
T. Buey,
M. Centrone,
F. Chemla,
J. L. Gach,
E. Gendron,
D. Gratadour,
I. Guidolin,
D. R. Jenkins,
E. Marchetti,
T. J. Morris,
R. M. Myers,
J. Osborn,
A. P. Reeves,
M. Reyes,
G. Rousset,
G. Lombardi,
M. J. Townson,
F. Vidal
Abstract:
The performance of adaptive optics systems is partially dependant on the algorithms used within the real-time control system to compute wavefront slope measurements. We demonstrate use of a matched filter algorithm for the processing of elongated laser guide star (LGS) Shack-Hartmann images, using the CANARY adaptive optics instrument on the 4.2m William Herschel Telescope and the European Souther…
▽ More
The performance of adaptive optics systems is partially dependant on the algorithms used within the real-time control system to compute wavefront slope measurements. We demonstrate use of a matched filter algorithm for the processing of elongated laser guide star (LGS) Shack-Hartmann images, using the CANARY adaptive optics instrument on the 4.2m William Herschel Telescope and the European Southern Observatory Wendelstein LGS Unit placed 40m away. This algorithm has been selected for use with the forthcoming Thirty Meter Telescope, but until now had not been demonstrated on-sky. From the results of a first observing run, we show that the use of matched filtering improves our adaptive optics system performance, with increases in on-sky H-band Strehl measured up to about a factor of 1.1 with respect to a conventional centre of gravity approach. We describe the algorithm used, and the methods that we implemented to enable on-sky demonstration.
△ Less
Submitted 13 February, 2017;
originally announced February 2017.
-
Turbulence velocity profiling for high sensitivity and vertical-resolution atmospheric characterization with Stereo-SCIDAR
Authors:
J. Osborn,
T. Butterley,
M. J. Townson,
A. P. Reeves,
T. J. Morris,
R. W. Wilson
Abstract:
As telescopes become larger, into the era of ~40 m Extremely Large Telescopes, the high- resolution vertical profile of the optical turbulence strength is critical for the validation, optimization and operation of optical systems. The velocity of atmospheric optical turbulence is an important parameter for several applications including astronomical adaptive optics systems. Here, we compare the ve…
▽ More
As telescopes become larger, into the era of ~40 m Extremely Large Telescopes, the high- resolution vertical profile of the optical turbulence strength is critical for the validation, optimization and operation of optical systems. The velocity of atmospheric optical turbulence is an important parameter for several applications including astronomical adaptive optics systems. Here, we compare the vertical profile of the velocity of the atmospheric wind above La Palma by means of a comparison of Stereo-SCIntillation Detection And Ranging (Stereo- SCIDAR) with the Global Forecast System models and nearby balloon-borne radiosondes. We use these data to validate the automated optical turbulence velocity identification from the Stereo-SCIDAR instrument mounted on the 2.5 m Isaac Newton Telescope, La Palma. By comparing these data we infer that the turbulence velocity and the wind velocity are consistent and that the automated turbulence velocity identification of the Stereo-SCIDAR is precise. The turbulence velocities can be used to increase the sensitivity of the turbulence strength profiles, as weaker turbulence that may be misinterpreted as noise can be detected with a velocity vector. The turbulence velocities can also be used to increase the altitude resolution of a detected layer, as the altitude of the velocity vectors can be identified to a greater precision than the native resolution of the system. We also show examples of complex velocity structure within a turbulent layer caused by wind shear at the interface of atmospheric zones.
△ Less
Submitted 10 January, 2017;
originally announced January 2017.
-
William Herschel Telescope site characterization using the MOAO pathfinder CANARY on-sky data
Authors:
O. A. Martin,
C. M. Correia,
E. Gendron,
G. Rousset,
F. Vidal,
T. J. Morris,
A. G. Basden,
R. M. Myers,
Y. H. Ono,
B. Neichel,
T. Fusco
Abstract:
Canary is the Multi-Object Adaptive Optics (MOAO) pathfinder for the future MOAO-assisted Integral-Field Units (IFU) proposed for Extremely Large Telescopes (ELT). The MOAO concept relies on tomographically reconstructing the turbulence using multiple measurements along different lines of sight. Tomography requires the knowledge of the statistical turbulence parameters, commonly recovered from the…
▽ More
Canary is the Multi-Object Adaptive Optics (MOAO) pathfinder for the future MOAO-assisted Integral-Field Units (IFU) proposed for Extremely Large Telescopes (ELT). The MOAO concept relies on tomographically reconstructing the turbulence using multiple measurements along different lines of sight. Tomography requires the knowledge of the statistical turbulence parameters, commonly recovered from the system telemetry using a dedicated profiling technique. For demonstration purposes with the MOAO pathfinder Canary , this identification is performed thanks to the Learn & Apply (L&A) algorithm, that consists in model- fitting the covariance matrix of WFS measurements dependent on relevant parameters: $C_n^2(h)$ profile, outer scale profile and system mis-registration. We explore an upgrade of this algorithm, the Learn 3 Steps (L3S) approach, that allows one to dissociate the identification of the altitude layers from the ground in order to mitigate the lack of convergence of the required empirical covariance matrices therefore reducing the required length of data time-series for reaching a given accuracy. For nominal observation conditions, the L3S can reach the same level of tomographic error in using five times less data frames than the L&A approach. The L3S technique has been applied over a large amount of Canary data to characterize the turbu- lence above the William Herschel Telescope (WHT). These data have been acquired the 13th, 15th, 16th, 17th and 18th September 2013 and we find 0.67"/8.9m/3.07m/s of total seeing/outer scale/wind-speed, with 0.552"/9.2m/2.89m/s below 1.5 km and 0.263"/10.3m/5.22m/s between 1.5 and 20 km. We have also de- termined the high altitude layers above 20 km, missed by the tomographic reconstruction on Canary , have a median seeing of 0.187" and have occurred 16% of observation time.
△ Less
Submitted 20 October, 2016;
originally announced October 2016.
-
Wave-front error breakdown in LGS MOAO validated on-sky by CANARY
Authors:
O. A. Martin,
É. Gendron.,
G. Rousset,
D. Gratadour,
F. Vidal,
T. J. Morris,
A. G. Basden,
R. M. Myers,
C. M. Correia,
D. Henry
Abstract:
CANARY is the multi-object adaptive optics (MOAO) on-sky pathfinder developed in the perspective of Multi-Object Spectrograph on Extremely Large Telescopes~(ELTs). In 2013, CANARY was operated on-sky at the William Herschel telescope~(WHT), using three off-axis natural guide stars~(NGS) and four off-axis Rayleigh laser guide stars~(LGS), in open-loop, with the on-axis compensated turbulence observ…
▽ More
CANARY is the multi-object adaptive optics (MOAO) on-sky pathfinder developed in the perspective of Multi-Object Spectrograph on Extremely Large Telescopes~(ELTs). In 2013, CANARY was operated on-sky at the William Herschel telescope~(WHT), using three off-axis natural guide stars~(NGS) and four off-axis Rayleigh laser guide stars~(LGS), in open-loop, with the on-axis compensated turbulence observed with a H-band imaging camera and a Truth wave-front sensor~(TS) for diagnostic purposes. Our purpose is to establish a reliable and accurate wave-front error breakdown for LGS MOAO. This will enable a comprehensive analysis of \cana on-sky results and provide tools for validating simulations of MOAO systems for ELTs. To evaluate the MOAO performance, we compared the CANARY on-sky results running in MOAO, in Single Conjugated Adaptive Optics~(SCAO) and in Ground Layer Adaptive Optics~(GLAO) modes, over a large set of data acquired in 2013. We provide a statistical study of the seeing. We also evaluated the wave-front error breakdown from both analytic computations, one based on a MOAO system modelling and the other on the measurements from the CANARY TS. We have focussed especially on the tomographic error and we detail its vertical error decomposition~(VED). We show that CANARY obtained 30.1\%, 21.4\% and 17.1\% H-band Strehl ratios in SCAO, MOAO and GLAO respectively, for median seeing conditions with 0.66" of total seeing including 0.59" at the ground. Moreover, we get 99\% of correlation over 4,500 samples, for any AO modes, between two analytic computations of residual phase variance. Based on these variances, we obtain a reasonable Strehl-ratio~(SR) estimation when compared to the measured IR image SR. We evaluate the gain in compensation for the altitude turbulence brought by MOAO when compared to GLAO.
△ Less
Submitted 20 October, 2016; v1 submitted 15 October, 2016;
originally announced October 2016.
-
PSF reconstruction validated using on-sky CANARY data in MOAO mode
Authors:
O. A. Martin,
C. M. Correia,
E. Gendron,
G. Rousset,
D. Gratadour,
F. Vidal,
T. J. Morris,
A. G. Basden,
R. M. Myers,
B. Neichel,
T. Fusco
Abstract:
In preparation of future Multi-Object Spectrographs (MOS) whose one of the major role is to provide an extensive statistical studies of high redshifted galaxies surveyed, the demonstrator Canary has been designed to tackle technical challenges related to open-loop Adaptive-Optics (AO) control with jointed Natural Guide Star (NGS) and Laser Guide Star (LGS) tomography. We have developed a Point Spr…
▽ More
In preparation of future Multi-Object Spectrographs (MOS) whose one of the major role is to provide an extensive statistical studies of high redshifted galaxies surveyed, the demonstrator Canary has been designed to tackle technical challenges related to open-loop Adaptive-Optics (AO) control with jointed Natural Guide Star (NGS) and Laser Guide Star (LGS) tomography. We have developed a Point Spread Function (PSF)-Reconstruction algorithm dedicated to MOAO systems using system telemetry to estimate the PSF potentially anywhere in the observed field, a prerequisite to post- process AO-corrected observations in Integral Field Spectroscopy (IFS). In this paper we show how to handle off-axis data to estimate the PSF using atmospheric tomography and compare it to a classical approach that uses on-axis residual phase from a truth sensor observing a natural bright source. We have reconstructed over 450 on-sky Canary PSFs and we get bias/1-$σ$ standard-deviation (std) of 1.3/4.8 on the H-band Strehl ratio (SR) with 92.3% of correlation between reconstructed and sky SR. On the Full Width at Half Maximum (FWHM), we get respectively 2.94 mas, 19.9 mas and 88.3% for the bias, std and correlation. The reference method achieves 0.4/3.5/95% on the SR and 2.71 mas/14.9 mas/92.5% on the FWHM for the bias/std/correlation.
△ Less
Submitted 20 October, 2016; v1 submitted 7 October, 2016;
originally announced October 2016.
-
Develo** an integrated concept for the E-ELT Multi-Object Spectrograph (MOSAIC): design issues and trade-offs
Authors:
Myriam Rodrigues,
Gavin Dalton,
Ewan Fitzsimons,
Fanny Chemla,
Tim Morris,
Francois Hammer,
Mathieu Puech,
Christopher Evans,
Pascal Jagourel
Abstract:
We present a discussion of the design issues and trade-offs that have been considered in putting together a new concept for MOSAIC, the multi-object spectrograph for the E-ELT. MOSAIC aims to address the combined science cases for E-ELT MOS that arose from the earlier studies of the multi-object and multi-adaptive optics instruments. MOSAIC combines the advantages of a highly-multiplexed instrumen…
▽ More
We present a discussion of the design issues and trade-offs that have been considered in putting together a new concept for MOSAIC, the multi-object spectrograph for the E-ELT. MOSAIC aims to address the combined science cases for E-ELT MOS that arose from the earlier studies of the multi-object and multi-adaptive optics instruments. MOSAIC combines the advantages of a highly-multiplexed instrument targeting single-point objects with one which has a more modest multiplex but can spatially resolve a source with high resolution (IFU). These will span across two wavebands: visible and near-infrared.
△ Less
Submitted 21 September, 2016;
originally announced September 2016.
-
Monte-Carlo modelling of multi-object adaptive optics performance on the European Extremely Large Telescope
Authors:
Alastair Basden,
Tim Morris
Abstract:
The performance of a wide-field adaptive optics system depends on input design parameters. Here we investigate the performance of a multi-object adaptive optics system design for the European Extremely Large Telescope, using an end-to-end Monte-Carlo adaptive optics simulation tool, DASP, with relevance for proposed instruments such as MOSAIC. We consider parameters such as the number of laser gui…
▽ More
The performance of a wide-field adaptive optics system depends on input design parameters. Here we investigate the performance of a multi-object adaptive optics system design for the European Extremely Large Telescope, using an end-to-end Monte-Carlo adaptive optics simulation tool, DASP, with relevance for proposed instruments such as MOSAIC. We consider parameters such as the number of laser guide stars, sodium layer depth, wavefront sensor pixel scale, actuator pitch and natural guide star availability. We provide potential areas where costs savings can be made, and investigate trade-offs between performance and cost, and provide solutions that would enable such an instrument to be built with currently available technology. Our key recommendations include a trade-off for laser guide star wavefront sensor pixel scale of about 0.7 arcseconds per pixel, and a field of view of at least 7 arcseconds, that EMCCD technology should be used for natural guide star wavefront sensors even if reduced frame rate is necessary, and that sky coverage can be improved by a slight reduction in natural guide star sub-aperture count without significantly affecting tomographic performance. We find that adaptive optics correction can be maintained across a wide field of view, up to 7 arcminutes in diameter. We also recommend the use of at least 4 laser guide stars, and include ground-layer and multi-object adaptive optics performance estimates.
△ Less
Submitted 8 September, 2016;
originally announced September 2016.
-
EELT-HIRES the high-resolution spectrograph for the E-ELT
Authors:
A. Marconi,
P. Di Marcantonio,
V. D'Odorico,
S. Cristiani,
R. Maiolino,
E. Oliva,
L. Origlia,
M. Riva,
L. Valenziano,
F. M. Zerbi,
M. Abreu,
V. Adibekyan,
C. Allende Prieto,
P. J. Amado,
W. Benz,
I. Boisse,
X. Bonfils,
F. Bouchy,
L. Buchhave,
D. Buscher,
A. Cabral,
B. L. Canto Martins,
A. Chiavassa,
J. Coelho,
L. B. Christensen
, et al. (48 additional authors not shown)
Abstract:
The first generation of E-ELT instruments will include an optical-infrared High Resolution Spectrograph, conventionally indicated as EELT-HIRES, which will be capable of providing unique breakthroughs in the fields of exoplanets, star and planet formation, physics and evolution of stars and galaxies, cosmology and fundamental physics. A 2-year long phase A study for EELT-HIRES has just started and…
▽ More
The first generation of E-ELT instruments will include an optical-infrared High Resolution Spectrograph, conventionally indicated as EELT-HIRES, which will be capable of providing unique breakthroughs in the fields of exoplanets, star and planet formation, physics and evolution of stars and galaxies, cosmology and fundamental physics. A 2-year long phase A study for EELT-HIRES has just started and will be performed by a consortium composed of institutes and organisations from Brazil, Chile, Denmark, France, Germany, Italy, Poland, Portugal, Spain, Sweden, Switzerland and United Kingdom. In this paper we describe the science goals and the preliminary technical concept for EELT-HIRES which will be developed during the phase A, as well as its planned development and consortium organisation during the study.
△ Less
Submitted 2 September, 2016;
originally announced September 2016.
-
Science Requirements and Trade-offs for the MOSAIC Instrument for the European ELT
Authors:
C. J. Evans,
M. Puech,
M. Rodrigues,
B. Barbuy,
J. -G. Cuby,
G. Dalton,
E. Fitzsimons,
F. Hammer,
P. Jagourel,
L. Kaper,
S. L. Morris,
T. J. Morris
Abstract:
Building on the comprehensive White Paper on the scientific case for multi-object spectroscopy on the European ELT, we present the top-level instrument requirements that are being used in the Phase A design study of the MOSAIC concept. The assembled cases span the full range of E-ELT science and generally require either 'high multiplex' or 'high definition' observations to best exploit the excelle…
▽ More
Building on the comprehensive White Paper on the scientific case for multi-object spectroscopy on the European ELT, we present the top-level instrument requirements that are being used in the Phase A design study of the MOSAIC concept. The assembled cases span the full range of E-ELT science and generally require either 'high multiplex' or 'high definition' observations to best exploit the excellent sensitivity and spatial performance of the telescope. We highlight some of the science studies that are now being used in trade-off studies to inform the capabilities of MOSAIC and its technical design.
△ Less
Submitted 23 August, 2016;
originally announced August 2016.
-
HiPERCAM: A high-speed, quintuple-beam CCD camera for the study of rapid variability in the Universe
Authors:
V. S. Dhillon,
T. R. Marsh,
N. Bezawada,
M. Black,
S. Dixon,
T. Gamble,
D. Henry,
P. Kerry,
S. P. Littlefair,
D. W. Lunney,
T. Morris,
J. Osborn,
R. W. Wilson
Abstract:
HiPERCAM is a high-speed camera for the study of rapid variability in the Universe. The project is funded by a 3.5MEuro European Research Council Advanced Grant. HiPERCAM builds on the success of our previous instrument, ULTRACAM, with very significant improvements in performance thanks to the use of the latest technologies. HiPERCAM will use 4 dichroic beamsplitters to image simultaneously in 5 o…
▽ More
HiPERCAM is a high-speed camera for the study of rapid variability in the Universe. The project is funded by a 3.5MEuro European Research Council Advanced Grant. HiPERCAM builds on the success of our previous instrument, ULTRACAM, with very significant improvements in performance thanks to the use of the latest technologies. HiPERCAM will use 4 dichroic beamsplitters to image simultaneously in 5 optical channels covering the u'g'r'i'z' bands. Frame rates of over 1000 per second will be achievable using an ESO CCD controller (NGC), with every frame GPS timestamped. The detectors are custom-made, frame-transfer CCDs from e2v, with 4 low-noise (2.5e-) outputs, mounted in small thermoelectrically-cooled heads operated at 180 K, resulting in virtually no dark current. The two reddest CCDs will be deep-depletion devices with anti-etaloning, providing high quantum efficiencies across the red part of the spectrum with no fringing. The instrument will also incorporate scintillation noise correction via the conjugate-plane photometry technique. The opto-mechanical chassis will make use of additive manufacturing techniques in metal to make a light-weight, rigid and temperature-invariant structure. First light is expected on the 4.2m William Herschel Telescope on La Palma in 2017 (on which the field of view will be 10' with a 0.3"/pixel scale), with subsequent use planned on the 10.4m Gran Telescopio Canarias on La Palma (on which the field of view will be 4' with a 0.11"/pixel scale) and the 3.5m New Technology Telescope in Chile.
△ Less
Submitted 29 June, 2016;
originally announced June 2016.
-
Experience with wavefront sensor and deformable mirror interfaces for wide-field adaptive optics systems
Authors:
A. G. Basden,
D. Atkinson,
N. A. Bharmal,
U. Bitenc,
M. Brangier,
T. Buey,
T. Butterley,
D. Cano,
F. Chemla,
P. Clark,
M. Cohen,
J. -M. Conan,
F. J. de Cos,
C. Dickson,
N. A. Dipper,
C. N. Dunlop,
P. Feautrier,
T. Fusco,
J. L. Gach,
E. Gendron,
D. Geng,
S. J. Goodsell,
D. Gratadour,
A. H. Greenaway,
A. Guesalaga
, et al. (34 additional authors not shown)
Abstract:
Recent advances in adaptive optics (AO) have led to the implementation of wide field-of-view AO systems. A number of wide-field AO systems are also planned for the forthcoming Extremely Large Telescopes. Such systems have multiple wavefront sensors of different types, and usually multiple deformable mirrors (DMs).
Here, we report on our experience integrating cameras and DMs with the real-time c…
▽ More
Recent advances in adaptive optics (AO) have led to the implementation of wide field-of-view AO systems. A number of wide-field AO systems are also planned for the forthcoming Extremely Large Telescopes. Such systems have multiple wavefront sensors of different types, and usually multiple deformable mirrors (DMs).
Here, we report on our experience integrating cameras and DMs with the real-time control systems of two wide-field AO systems. These are CANARY, which has been operating on-sky since 2010, and DRAGON, which is a laboratory adaptive optics real-time demonstrator instrument. We detail the issues and difficulties that arose, along with the solutions we developed. We also provide recommendations for consideration when develo** future wide-field AO systems.
△ Less
Submitted 24 March, 2016;
originally announced March 2016.
-
A tomographic algorithm to determine tip-tilt information from laser guide stars
Authors:
A. P. Reeves,
T. J. Morris,
R. M. Myers,
N. A. Bharmal,
J. Osborn
Abstract:
Laser Guide Stars (LGS) have greatly increased the sky-coverage of Adaptive Optics (AO) systems. Due to the up-link turbulence experienced by LGSs, a Natural Guide Star (NGS) is still required, preventing full sky-coverage. We present a method of obtaining partial tip-tilt information from LGSs alone in multi-LGS tomographic LGS AO systems. The method of LGS up-link tip-tilt determination is deriv…
▽ More
Laser Guide Stars (LGS) have greatly increased the sky-coverage of Adaptive Optics (AO) systems. Due to the up-link turbulence experienced by LGSs, a Natural Guide Star (NGS) is still required, preventing full sky-coverage. We present a method of obtaining partial tip-tilt information from LGSs alone in multi-LGS tomographic LGS AO systems. The method of LGS up-link tip-tilt determination is derived using a geometric approach, then an alteration to the Learn and Apply algorithm for tomographic AO is made to accommodate up-link tip-tilt. Simulation results are presented, verifying that the technique shows good performance in correcting high altitude tip-tilt, but not that from low altitudes. We suggest that the method is combined with multiple far off-axis tip-tilt NGSs to provide gains in performance and sky-coverage over current tomographic AO systems.
△ Less
Submitted 15 March, 2016; v1 submitted 28 January, 2016;
originally announced January 2016.
-
Efficient photonic reformatting of celestial light for diffraction-limited spectroscopy
Authors:
David G. MacLachlan,
Robert J. Harris,
Itandehui Gris-Sánchez,
Timothy J. Morris,
Debaditya Choudhury,
Eric Gendron,
Alastair G. Basden,
Izabela J. Spaleniak,
Alexander Arriola,
Tim A. Birks,
Jeremy R. Allington-Smith,
Robert R. Thomson
Abstract:
The spectral resolution of a dispersive astronomical spectrograph is limited by the trade-off between throughput and the width of the entrance slit. Photonic guided-wave transitions have been proposed as a route to bypass this trade-off, by enabling the efficient reformatting of incoherent seeing-limited light collected by the telescope into a linear array of single modes: a pseudo-slit which is h…
▽ More
The spectral resolution of a dispersive astronomical spectrograph is limited by the trade-off between throughput and the width of the entrance slit. Photonic guided-wave transitions have been proposed as a route to bypass this trade-off, by enabling the efficient reformatting of incoherent seeing-limited light collected by the telescope into a linear array of single modes: a pseudo-slit which is highly multimode in one axis but diffraction-limited in the dispersion axis of the spectrograph. It is anticipated that the size of a single-object spectrograph fed with light in this manner would be essentially independent of the telescope aperture size. A further anticipated benefit is that such spectrographs would be free of `modal noise', a phenomenon that occurs in high-resolution multimode fibre-fed spectrographs due to the coherent nature of the telescope point-spread-function (PSF). We address these aspects by integrating a multicore fibre photonic lantern with an ultrafast laser inscribed three-dimensional waveguide interconnect to spatially reformat the modes within the PSF into a diffraction-limited pseudo-slit. Using the CANARY adaptive optics (AO) demonstrator on the William Herschel Telescope, and 1530 $\pm$ 80 nm stellar light, the device is found to exhibit a transmission of 47-53 % depending upon the mode of AO correction applied. We also show the advantage of using AO to couple light into such a device by sampling only the core of the CANARY PSF. This result underscores the possibility that a fully-optimised guided-wave device can be used with AO to provide efficient spectroscopy at high spectral resolution.
△ Less
Submitted 22 December, 2015;
originally announced December 2015.
-
Wide-field adaptive optics performance in cosmological deep fields for multi-object spectroscopy with the European Extremely Large Telescope
Authors:
Alastair Basden,
Chris Evans,
Tim Morris
Abstract:
A multi-object spectrograph on the forthcoming European Extremely Large Telescope will be required to operate with good sky coverage. Many of the interesting deep cosmological fields were deliberately chosen to be free of bright foreground stars, and therefore are potentially challenging for adaptive optics (AO) systems. Here we investigate multi-object AO performance using sub-fields chosen at ra…
▽ More
A multi-object spectrograph on the forthcoming European Extremely Large Telescope will be required to operate with good sky coverage. Many of the interesting deep cosmological fields were deliberately chosen to be free of bright foreground stars, and therefore are potentially challenging for adaptive optics (AO) systems. Here we investigate multi-object AO performance using sub-fields chosen at random from within the Great Observatories Origins Deep Survey (GOODS)-S field, which is the worst case scenario for five deep fields used extensively in studies of high-redshift galaxies. Our AO system model is based on that of the proposed MOSAIC instrument but our findings are equally applicable to plans for multi-object spectroscopy on any of the planned Extremely Large Telescopes. Potential guide stars within these sub-fields are identified and used for simulations of AO correction. We achieve ensquared energies within 75~mas of between 25-35\% depending on the sub-field, which is sufficient to probe sub-kpc scales in high-redshift galaxies. We also investigate the effect of detector readout noise on AO system performance, and consider cases where natural guide stars are used for both high-order and tip-tilt-only AO correction. We also consider how performance scales with ensquared energy box size. In summary, the expected AO performance is sufficient for a MOSAIC-like instrument, even within deep fields characterised by a lack of bright foreground stars.
△ Less
Submitted 26 September, 2014;
originally announced September 2014.
-
Characterization of a commercial, front-illuminated interline transfer CCD camera for use as a guide camera on a balloon-borne telescope
Authors:
Paul Clark,
Richard Massey,
Herrick L. Chang,
Mathew Galloway,
Holger Israel,
Laura L. Jones,
Lun Li,
Milan Mandic,
Tim Morris,
Barth Netterfield,
John Peacock,
Ray Sharples,
Sara Susca
Abstract:
We report results obtained during the characterization of a commercial front-illuminated progressive scan interline transfer CCD camera. We demonstrate that the unmodified camera operates successfully in temperature and pressure conditions (-40C, 4mBar) representative of a high altitude balloon mission. We further demonstrate that the centroid of a well-sampled star can be determined to better tha…
▽ More
We report results obtained during the characterization of a commercial front-illuminated progressive scan interline transfer CCD camera. We demonstrate that the unmodified camera operates successfully in temperature and pressure conditions (-40C, 4mBar) representative of a high altitude balloon mission. We further demonstrate that the centroid of a well-sampled star can be determined to better than 2% of a pixel, even though the CCD is equipped with a microlens array. This device has been selected for use in a closed-loop star-guiding and tip-tilt correction system in the BIT-STABLE balloon mission.
△ Less
Submitted 27 August, 2014;
originally announced August 2014.
-
Analysis of on-sky MOAO performance of CANARY using natural guide stars
Authors:
Fabrice Vidal,
Eric Gendron,
Gerard Rousset,
Tim Morris,
Alastair Basden,
Richard Myers,
Matthieu Brangier,
Fanny Chemla,
Nigel Dipper,
Damien Gratadour,
David Henry,
Zoltan Hubert,
Andy Longmore,
Olivier Martin,
Gordon Talbot,
Eddy Younger
Abstract:
The first on-sky results obtained by CANARY, the Multi-Object Adaptive Optics (MOAO) demonstrator, are analysed. The data were recorded at the William Herschel Telescope, at the end of September 2010. We describe the command and calibrations algorithms used during the run and present the observing conditions. The processed data are MOAO-loop engaged or disengaged slope buffers, comprising the sync…
▽ More
The first on-sky results obtained by CANARY, the Multi-Object Adaptive Optics (MOAO) demonstrator, are analysed. The data were recorded at the William Herschel Telescope, at the end of September 2010. We describe the command and calibrations algorithms used during the run and present the observing conditions. The processed data are MOAO-loop engaged or disengaged slope buffers, comprising the synchronised measurements of the four Natural Guide Stars (NGS) wavefront sensors running in parallel, and near Infra-Red (IR) images. We describe the method we use to establish the error budget of CANARY. We are able to evaluate the to- mographic and the open loop errors, having median values around 216 nm and 110 nm respectively. In addition, we identify an unexpected residual quasi-static field aberration term of mean value 110 nm. We present the detailed error budget analysed for three sets of data for three different asterisms. We compare the experimental budgets with the numerically simulated ones and demonstrate a good agreement. We find also a good agreement between the computed error budget from the slope buffers and the measured Strehl ratio on the IR images, ranging between 10% and 20% at 1 530 nm. These results make us confident in our ability to establish the error budget of future MOAO instruments.
△ Less
Submitted 23 June, 2014;
originally announced June 2014.
-
Cosmological back-reaction in modified gravity and its implications for dark energy
Authors:
Anthony W. H. Preston,
Tim R. Morris
Abstract:
We study the effective stress-energy tensor induced by cosmological inhomogeneity in $f(R)=R+cR^2$ and equivalent scalar-tensor theories, motivated both by models of early universe inflation and by phenomenological alternative cosmologies to the standard $Λ$-CDM. We use Green and Wald's framework for averaging over classical fluctuations of short-wavelength $λ$. By ensuring that the leading non-li…
▽ More
We study the effective stress-energy tensor induced by cosmological inhomogeneity in $f(R)=R+cR^2$ and equivalent scalar-tensor theories, motivated both by models of early universe inflation and by phenomenological alternative cosmologies to the standard $Λ$-CDM. We use Green and Wald's framework for averaging over classical fluctuations of short-wavelength $λ$. By ensuring that the leading non-linear terms from the fluctuations of the Einstein terms and the corrections both contribute in the formal limit as $λ\to0$, we derive a diffeomorphism invariant effective stress-energy tensor whose trace is non-vanishing and of the right sign to potentially account for the current acceleration of the universe. However a more phenomenologically acceptable dark energy model would be required if this effect were to fully account for the current acceleration.
△ Less
Submitted 11 August, 2014; v1 submitted 20 June, 2014;
originally announced June 2014.
-
Open-loop tomography with artificial neural networks on CANARY: on-sky results
Authors:
J. Osborn,
F. J. De Cos Juez,
D. Guzman,
A. Basden,
T. J. Morris,
E. Gendron,
T. Butterley,
R. M. Myers,
A. Gueslaga,
F. S. Lasheras,
M. G. Victoria,
M. L. S. Rodriguez,
D. Gratadour,
G. Rousset
Abstract:
We present recent results from the initial testing of an Artificial Neural Network (ANN) based tomographic reconstructor Complex Atmospheric Reconstructor based on Machine lEarNing (CARMEN) on Canary, an Adaptive Optics demonstrator operated on the 4.2m William Herschel Telescope, La Palma. The reconstructor was compared with contemporaneous data using the Learn and Apply (L&A) tomographic reconst…
▽ More
We present recent results from the initial testing of an Artificial Neural Network (ANN) based tomographic reconstructor Complex Atmospheric Reconstructor based on Machine lEarNing (CARMEN) on Canary, an Adaptive Optics demonstrator operated on the 4.2m William Herschel Telescope, La Palma. The reconstructor was compared with contemporaneous data using the Learn and Apply (L&A) tomographic reconstructor. We find that the fully optimised L&A tomographic reconstructor outperforms CARMEN by approximately 5% in Strehl ratio or 15nm rms in wavefront error. We also present results for Canary in Ground Layer Adaptive Optics mode to show that the reconstructors are tomographic. The results are comparable and this small deficit is attributed to limitations in the training data used to build the ANN. Laboratory bench tests show that the ANN can out perform L&A under certain conditions, e.g. if the higher layer of a model two layer atmosphere was to change in altitude by ~300~m (equivalent to a shift of approximately one tenth of a subaperture).
△ Less
Submitted 27 May, 2014;
originally announced May 2014.
-
On the Existence of Low-Mass Dark Matter and its Direct Detection
Authors:
James Bateman,
Ian McHardy,
Alexander Merle,
Tim R. Morris,
Hendrik Ulbricht
Abstract:
Dark Matter (DM) is an elusive form of matter which has been postulated to explain astronomical observations through its gravitational effects on stars and galaxies, gravitational lensing of light around these, and through its imprint on the Cosmic Microwave Background (CMB). This indirect evidence implies that DM accounts for as much as 84.5% of all matter in our Universe, yet it has so far evade…
▽ More
Dark Matter (DM) is an elusive form of matter which has been postulated to explain astronomical observations through its gravitational effects on stars and galaxies, gravitational lensing of light around these, and through its imprint on the Cosmic Microwave Background (CMB). This indirect evidence implies that DM accounts for as much as 84.5% of all matter in our Universe, yet it has so far evaded all attempts at direct detection, leaving such confirmation and the consequent discovery of its nature as one of the biggest challenges in modern physics. Here we present a novel form of low-mass DM $χ$ that would have been missed by all experiments so far. While its large interaction strength might at first seem unlikely, neither constraints from particle physics nor cosmological/astronomical observations are sufficient to rule out this type of DM, and it motivates our proposal for direct detection by optomechanics technology which should soon be within reach, namely, through the precise position measurement of a levitated mesoscopic particle which will be perturbed by elastic collisions with $χ$ particles. We show that a recently proposed nanoparticle matter-wave interferometer, originally conceived for tests of the quantum superposition principle, is sensitive to these collisions, too.
△ Less
Submitted 21 May, 2014;
originally announced May 2014.