-
The Colibri Telescope Array for KBO Detection through Serendipitous Stellar Occultations: a Technical Description
Authors:
M. J. Mazur,
S. Metchev,
R. A. Brown,
R. Gupta,
R. Bloch,
T. Mills,
E. Pass
Abstract:
We present the technical design, construction and testing of the Colibri telescope array at Elginfield Observatory near London, Ontario, Canada. Three 50-cm telescopes are arranged in a triangular array and are separated by 110-160 metres. During operation, they will monitor field stars at the intersections of the ecliptic and galactic plane for serendipitous stellar occultations (SSOs) by trans-N…
▽ More
We present the technical design, construction and testing of the Colibri telescope array at Elginfield Observatory near London, Ontario, Canada. Three 50-cm telescopes are arranged in a triangular array and are separated by 110-160 metres. During operation, they will monitor field stars at the intersections of the ecliptic and galactic plane for serendipitous stellar occultations (SSOs) by trans-Neptunian objects (TNOs). At a frame rate of 40 frames per second (fps), Fresnel diffraction in the occultation light curve can be resolved and, with coincident detections, be used to estimate basic properties of the occulting object. Using off-the-shelf components, the Colibri system streams imagery to disk at a rate of 1.5 GB/s for next-day processing by a custom occultation detection pipeline.
The imaging system has been tested and is found to perform well, given the moderate site conditions. Limiting magnitudes at 40 fps are found to be about 12.1 (temporal SNR=5, visible light Gaia G band) with time-series standard deviations ranging from about 0.035 mag to >0.2 mag. SNR is observed to decrease linearly with magnitude for stars fainter than about G = 9.5 mag. Brighter than this limit, SNR is constant, suggesting that atmospheric scintillation is the dominant noise source. Astrometric solutions show errors typically less than approximately 0.3 pixels (0.8 arc seconds) without a need for high-order corrections.
△ Less
Submitted 11 October, 2022;
originally announced October 2022.
-
Development of a Very Faint Meteor Detection System based on an EMCCD Sensor and Matched Filter Processing
Authors:
P. Gural,
T. Mills,
M. Mazur,
P. Brown
Abstract:
The mass ranges of meteors, imaged by electro-optical (EO) cameras and backscatter radar receivers, for the most part do not overlap. Typical EO systems detect meteoroid masses down to 10$^{-5}$ kg or roughly magnitude +2 meteors when using moderate field of view optics, un-intensified optical components, and meteor entry velocities around 45 km/sec. This is near the high end of the mass range of…
▽ More
The mass ranges of meteors, imaged by electro-optical (EO) cameras and backscatter radar receivers, for the most part do not overlap. Typical EO systems detect meteoroid masses down to 10$^{-5}$ kg or roughly magnitude +2 meteors when using moderate field of view optics, un-intensified optical components, and meteor entry velocities around 45 km/sec. This is near the high end of the mass range of typical meteor radar observations. Having the same mass meteor measured by different sensor wavelength bands would be a benefit in terms of calibrating mass estimations for both EO and radar. To that end, the University of Western Ontario (UWO) has acquired and deployed a very low light imaging system based on an electron-multiplying CCD camera technology. This embeds a very low noise, per pixel intensifier chip in a cooled camera setup with various options for frame rate, region of interest and binning. The EO system of optics and sensor was optimally configured to collect 32 frames per second in a square field of view 14.7 degrees on a side, achieving a single-frame stellar limiting magnitude of m$_G$ = +10.5. The system typically observes meteors of +6.5. A key development in this pipeline has been the first true application of matched filter processing to process the faintest meteors possible in the EMCCD system while also yielding high quality automated metric measurements of meteor focal plane positions. With pairs of EMCCD systems deployed at two sites, triangulation and high accuracy orbits are one of the many products being generated by this system. These measurements will be coupled to observations from the Canadian Meteor Orbit Radar (CMOR) used for meteor plasma characterization and the Canadian Automated Meteor Observatory (CAMO) high resolution mirror tracking system.
△ Less
Submitted 27 December, 2021;
originally announced December 2021.
-
Iron Rain: measuring the occurrence rate and origin of small iron meteoroids at Earth
Authors:
Tristan Mills,
P. G. Brown,
M. J. Mazur,
D. Vida,
Peter S. Gural,
Althea V. Moorhead
Abstract:
We report results of a four-year survey using Electron Multiplied Charged Coupled Device (EMCCD) cameras recording 34761 two-station video meteor events complete to a limiting magnitude of +6. The survey goal was to characterize probable iron meteoroids. Using only physical properties of the meteor trajectories including early peaking light curves, short luminous trajectories, and high energies ac…
▽ More
We report results of a four-year survey using Electron Multiplied Charged Coupled Device (EMCCD) cameras recording 34761 two-station video meteor events complete to a limiting magnitude of +6. The survey goal was to characterize probable iron meteoroids. Using only physical properties of the meteor trajectories including early peaking light curves, short luminous trajectories, and high energies accumulated per area at beginning, we identified 1068 iron meteors. Our iron candidates are most abundant at slow speeds < 15 km/s, where they make up approximately 20% of the mm-sized meteoroid population. They are overwhelmingly on asteroidal orbits, and have particularly low orbital eccentricities and smaller semi-major axes when compared to non-irons between 10-20 km/s. Our iron population appears to be more numerous at fainter magnitudes, comprising 15% of slow (10-15 km/s) meteors with peak brightness of +3 with the fraction rising to 25% at +6 to +7, our survey limit. The iron orbits are most consistent with an asteroidal source and are in highly evolved orbits, suggesting long collisional lifetimes (107 years). Metal-rich chondrules (nodules) found in abundance in EL Chondrites are one possible source for this population. We also propose a possible technique using R-band colours to more robustly identify fainter iron meteors with very high confidence.
△ Less
Submitted 21 September, 2021;
originally announced September 2021.
