-
A dynamical measure of the black hole mass in a quasar 11 billion years ago
Authors:
R. Abuter,
F. Allouche,
A. Amorim,
C. Bailet,
A. Berdeu,
J. -P. Berger,
P. Berio,
A. Bigioli,
O. Boebion,
M. -L. Bolzer,
H. Bonnet,
G. Bourdarot,
P. Bourget,
W. Brandner,
Y. Cao,
R. Conzelmann,
M. Comin,
Y. Clénet,
B. Courtney-Barrer,
R. Davies,
D. Defrère,
A. Delboulbé,
F. Delplancke-Ströbele,
R. Dembet,
J. Dexter
, et al. (102 additional authors not shown)
Abstract:
Tight relationships exist in the local universe between the central stellar properties of galaxies and the mass of their supermassive black hole. These suggest galaxies and black holes co-evolve, with the main regulation mechanism being energetic feedback from accretion onto the black hole during its quasar phase. A crucial question is how the relationship between black holes and galaxies evolves…
▽ More
Tight relationships exist in the local universe between the central stellar properties of galaxies and the mass of their supermassive black hole. These suggest galaxies and black holes co-evolve, with the main regulation mechanism being energetic feedback from accretion onto the black hole during its quasar phase. A crucial question is how the relationship between black holes and galaxies evolves with time; a key epoch to probe this relationship is at the peaks of star formation and black hole growth 8-12 billion years ago (redshifts 1-3). Here we report a dynamical measurement of the mass of the black hole in a luminous quasar at a redshift of 2, with a look back time of 11 billion years, by spatially resolving the broad line region. We detect a 40 micro-arcsecond (0.31 pc) spatial offset between the red and blue photocenters of the H$α$ line that traces the velocity gradient of a rotating broad line region. The flux and differential phase spectra are well reproduced by a thick, moderately inclined disk of gas clouds within the sphere of influence of a central black hole with a mass of 3.2x10$^{8}$ solar masses. Molecular gas data reveal a dynamical mass for the host galaxy of 6x10$^{11}$ solar masses, which indicates an under-massive black hole accreting at a super-Eddington rate. This suggests a host galaxy that grew faster than the supermassive black hole, indicating a delay between galaxy and black hole formation for some systems.
△ Less
Submitted 25 January, 2024;
originally announced January 2024.
-
The GRAVITY+ Project: Towards All-sky, Faint-Science, High-Contrast Near-Infrared Interferometry at the VLTI
Authors:
GRAVITY+ Collaboration,
:,
Roberto Abuter,
Patricio Alarcon,
Fatme Allouche,
Antonio Amorim,
Christophe Bailet,
Helen Bedigan,
Anthony Berdeu,
Jean-Philippe Berger,
Philippe Berio,
Azzurra Bigioli,
Richard Blaho,
Olivier Boebion,
Marie-Lena Bolzer,
Henri Bonnet,
Guillaume Bourdarot,
Pierre Bourget,
Wolfgang Brandner,
Cesar Cardenas,
Ralf Conzelmann,
Mauro Comin,
Yann Clénet,
Benjamin Courtney-Barrer,
Yigit Dallilar
, et al. (112 additional authors not shown)
Abstract:
The GRAVITY instrument has been revolutionary for near-infrared interferometry by pushing sensitivity and precision to previously unknown limits. With the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) in GRAVITY+, these limits will be pushed even further, with vastly improved sky coverage, as well as faint-science and high-contrast capabilities. This upgrade includes the im…
▽ More
The GRAVITY instrument has been revolutionary for near-infrared interferometry by pushing sensitivity and precision to previously unknown limits. With the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) in GRAVITY+, these limits will be pushed even further, with vastly improved sky coverage, as well as faint-science and high-contrast capabilities. This upgrade includes the implementation of wide-field off-axis fringe-tracking, new adaptive optics systems on all Unit Telescopes, and laser guide stars in an upgraded facility. GRAVITY+ will open up the sky to the measurement of black hole masses across cosmic time in hundreds of active galactic nuclei, use the faint stars in the Galactic centre to probe General Relativity, and enable the characterisation of dozens of young exoplanets to study their formation, bearing the promise of another scientific revolution to come at the VLTI.
△ Less
Submitted 19 January, 2023;
originally announced January 2023.
-
Impact of local turbulence on high-order adaptive optics
Authors:
Hugo Nowacki,
Jean-Baptiste Le Bouquin,
Carole Gouvret,
Aurélie Marcotto,
Sylvie Robbe-Dubois,
Karine Perraut,
Yves Magnard,
Alain Delboulbé,
Eric Stadler,
Sylvain Guieu,
Sylvain Rochat,
Didier Maurel
Abstract:
We present an experiment set to address a standard specification aiming at avoiding local turbulence inside the Coudé train of telescopes. Namely, every optical surface should be kept within a 1.5$^\circ$ range around ambient temperature. Such a specification represents an important concern and constraint when develo** optical systems for astronomy. Our aim was to test its criticality in the con…
▽ More
We present an experiment set to address a standard specification aiming at avoiding local turbulence inside the Coudé train of telescopes. Namely, every optical surface should be kept within a 1.5$^\circ$ range around ambient temperature. Such a specification represents an important concern and constraint when develo** optical systems for astronomy. Our aim was to test its criticality in the context of the development of the VLTI/NAOMI and VLTI/GRAVITY+ adaptive optics. This experiment has been conducted using the hardware of the future Corrective Optics (CO) of GRAVITY+. Optical measurements were performed in order to observe the evolution of turbulence in front of a flat mirror for which the surface temperature was controlled in a range of $22^\circ$ above ambient temperature. A time-dependent analysis of the turbulence was led along with a spatial analysis. This experiment shows no influence of temperature on local turbulence. It should be noted however that this result is only applicable to the very specific geometry described in this paper, which is representative of an adaptive optics (AO) system located inside the Coudé train (facing-down mirror heated on its backface).
△ Less
Submitted 23 September, 2022;
originally announced September 2022.
-
Building a GRAVITY+ Adaptive Optics Test Bench
Authors:
The Gravity Plus Consortium,
Florentin Millour,
Philippe Berio,
Stéphane Lagarde,
Sylvie Robbe-Dubois,
Carole Gouvret,
Olivier Lai,
Fatmé Allouche,
Christophe Bailet,
Olivier Boebion,
Marcel Carbillet,
Aurélie Marcotto,
Alain Spang,
Paul Girard,
Nicolas Mauclert,
Jean-Baptiste Le Bouquin,
Thibaut Paumard,
Ferréol Soulez,
Julien Woillez,
Nikhil More,
Frank Eisenhauer,
Christian Straubmeier,
Laura Kreidberg,
Paulo J. V. Garcia,
Sebastian Hoenig
Abstract:
We present the testbench aimed at integrating the GRAVITY+ adaptive optics GPAO. It consists of two independent elements, one reproducing the Coud{é} focus of the telescope, including the telescope deformable mirror mount (with its surface facing down), and one reproducing the Coud{é} room opto-mechanical environment, including a downwards-propagating beam, and the telescope mechanical interfaces…
▽ More
We present the testbench aimed at integrating the GRAVITY+ adaptive optics GPAO. It consists of two independent elements, one reproducing the Coud{é} focus of the telescope, including the telescope deformable mirror mount (with its surface facing down), and one reproducing the Coud{é} room opto-mechanical environment, including a downwards-propagating beam, and the telescope mechanical interfaces in order to fit in the new GPAO wavefront sensor. We discuss in this paper the design of this bench and the solutions we adopted to keep the cost low, keep the design compact (allowing it to be fully contained in a 20 sqm clean room), and align the bench independently from the adaptive optics. We also discuss the features we have set in this bench.
△ Less
Submitted 24 August, 2022;
originally announced August 2022.
-
First Light for GRAVITY Wide: Large Separation Fringe Tracking for the Very Large Telescope Interferometer
Authors:
GRAVITY+ Collaboration,
:,
R. Abuter,
F. Allouche,
A. Amorim,
C. Bailet,
M. Bauböck,
J. -P. Berger,
P. Berio,
A. Bigioli,
O. Boebion,
M. L. Bolzer,
H. Bonnet,
G. Bourdarot,
P. Bourget,
W. Brandner,
Y. Clénet,
B. Courtney-Barrer,
Y. Dallilar,
R. Davies,
D. Defrère,
A. Delboulbé,
F. Delplancke,
R. Dembet,
P. T. de Zeeuw
, et al. (92 additional authors not shown)
Abstract:
GRAVITY+ is the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) with wide-separation fringe tracking, new adaptive optics, and laser guide stars on all four 8~m Unit Telescopes (UTs), for ever fainter, all-sky, high contrast, milliarcsecond interferometry. Here we present the design and first results of the first phase of GRAVITY+, called GRAVITY Wide. GRAVITY Wide combines t…
▽ More
GRAVITY+ is the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) with wide-separation fringe tracking, new adaptive optics, and laser guide stars on all four 8~m Unit Telescopes (UTs), for ever fainter, all-sky, high contrast, milliarcsecond interferometry. Here we present the design and first results of the first phase of GRAVITY+, called GRAVITY Wide. GRAVITY Wide combines the dual-beam capabilities of the VLTI and the GRAVITY instrument to increase the maximum separation between the science target and the reference star from 2 arcseconds with the 8 m UTs up to several 10 arcseconds, limited only by the Earth's turbulent atmosphere. This increases the sky-coverage of GRAVITY by two orders of magnitude, opening up milliarcsecond resolution observations of faint objects, and in particular the extragalactic sky. The first observations in 2019 - 2022 include first infrared interferometry of two redshift $z\sim2$ quasars, interferometric imaging on the binary system HD 105913A, and repeated observations of multiple star systems in the Orion Trapezium Cluster. We find the coherence loss between the science object and fringe-tracking reference star well described by the turbulence of the Earth's atmosphere. We confirm that the larger apertures of the UTs result in higher visibilities for a given separation due to larger overlap of the projected pupils on sky and give predictions for visibility loss as a function of separation to be used for future planning.
△ Less
Submitted 23 August, 2022; v1 submitted 1 June, 2022;
originally announced June 2022.
-
MATISSE, the VLTI mid-infrared imaging spectro-interferometer
Authors:
B. Lopez,
S. Lagarde,
R. G. Petrov,
W. Jaffe,
P. Antonelli,
F. Allouche,
P. Berio,
A. Matter,
A. Meilland,
F. Millour,
S. Robbe-Dubois,
Th. Henning,
G. Weigelt,
A. Glindemann,
T. Agocs,
Ch. Bailet,
U. Beckmann,
F. Bettonvil,
R. van Boekel,
P. Bourget,
Y. Bresson,
P. Bristow,
P. Cruzalèbes,
E. Eldswijk,
Y. Fanteï Caujolle
, et al. (128 additional authors not shown)
Abstract:
Context:Optical interferometry is at a key development stage. ESO's VLTI has established a stable, robust infrastructure for long-baseline interferometry for general astronomical observers. The present second-generation instruments offer a wide wavelength coverage and improved performance. Their sensitivity and measurement accuracy lead to data and images of high reliability. Aims:We have develope…
▽ More
Context:Optical interferometry is at a key development stage. ESO's VLTI has established a stable, robust infrastructure for long-baseline interferometry for general astronomical observers. The present second-generation instruments offer a wide wavelength coverage and improved performance. Their sensitivity and measurement accuracy lead to data and images of high reliability. Aims:We have developed MATISSE, the Multi AperTure mid-Infrared SpectroScopic Experiment, to access high resolution imaging in a wide spectral domain and explore topics such: stellar activity and mass loss; planet formation and evolution in the gas and dust disks around young stars; accretion processes around super massive black holes in AGN. Methods:The instrument is a spectro-interferometric imager covering three atmospheric bands (L,M,N) from 2.8 to 13.0 mu, combining four optical beams from the VLTI's telscopes. Its concept, related observing procedure, data reduction and calibration approach are the product of 30 years of instrumental research. The instrument utilizes a multi-axial beam combination that delivers spectrally dispersed fringes. The signal provides the following quantities at several spectral resolutions: photometric flux, coherent fluxes, visibilities, closure phases, wavelength differential visibilities and phases, and aperture-synthesis imaging. Results:We provide an overview of the physical principle of the instrument and its functionalities, the characteristics of the delivered signal, a description of the observing modes and of their performance limits. An ensemble of data and reconstructed images are illustrating the first acquired key observations. Conclusion:The instrument has been in operation at Cerro Paranal, ESO, Chile since 2018, and has been open for science use by the international community since April 2019. The first scientific results are being published now.
△ Less
Submitted 2 March, 2022; v1 submitted 29 October, 2021;
originally announced October 2021.
-
Mid-infrared circumstellar emission of the long-period Cepheid l Carinae resolved with VLTI/MATISSE
Authors:
V. Hocdé,
N. Nardetto,
A. Matter,
E. Lagadec,
A. Mérand,
P. Cruzalèbes,
A. Meilland,
F. Millour,
B. Lopez,
P. Berio,
G. Weigelt,
R. Petrov,
J. W. Isbell,
W. Jaffe,
P. Kervella,
A. Glindemann,
M. Schöller,
F. Allouche,
A. Gallenne,
A. Domiciano de Souza,
G. Niccolini,
E. Kokoulina,
J. Varga,
S. Lagarde,
J. -C. Augereau
, et al. (129 additional authors not shown)
Abstract:
The nature of circumstellar envelopes (CSE) around Cepheids is still a matter of debate. The physical origin of their infrared (IR) excess could be either a shell of ionized gas, or a dust envelope, or both. This study aims at constraining the geometry and the IR excess of the environment of the long-period Cepheid $\ell$ Car (P=35.5 days) at mid-IR wavelengths to understand its physical nature. W…
▽ More
The nature of circumstellar envelopes (CSE) around Cepheids is still a matter of debate. The physical origin of their infrared (IR) excess could be either a shell of ionized gas, or a dust envelope, or both. This study aims at constraining the geometry and the IR excess of the environment of the long-period Cepheid $\ell$ Car (P=35.5 days) at mid-IR wavelengths to understand its physical nature. We first use photometric observations in various bands and Spitzer Space Telescope spectroscopy to constrain the IR excess of $\ell$ Car. Then, we analyze the VLTI/MATISSE measurements at a specific phase of observation, in order to determine the flux contribution, the size and shape of the environment of the star in the L band. We finally test the hypothesis of a shell of ionized gas in order to model the IR excess. We report the first detection in the L band of a centro-symmetric extended emission around l Car, of about 1.7$R_\star$ in FWHM, producing an excess of about 7.0\% in this band. In the N band, there is no clear evidence for dust emission from VLTI/MATISSE correlated flux and Spitzer data. On the other side, the modeled shell of ionized gas implies a more compact CSE ($1.13\pm0.02\,R_\star$) and fainter (IR excess of 1\% in the L band). We provide new evidences for a compact CSE of $\ell$ Car and we demonstrate the capabilities of VLTI/MATISSE for determining common properties of CSEs. While the compact CSE of $\ell$ Car is probably of gaseous nature, the tested model of a shell of ionized gas is not able to simultaneously reproduce the IR excess and the interferometric observations. Further Galactic Cepheids observations with VLTI/MATISSE are necessary for determining the properties of CSEs, which may also depend on both the pulsation period and the evolutionary state of the stars.
△ Less
Submitted 31 March, 2021;
originally announced March 2021.
-
A metrological characterization of the SPEED test-bed PIAACMC components
Authors:
K. Barjot,
P. Martinez,
M. Beaulieu,
C. Gouvret,
A. Marcotto,
O. Guyon,
M. Belhadi,
A. Caillat,
T. Behaghel,
J. M. Le Duigou,
K. Dohlen,
A. Vigan
Abstract:
The segmented pupil experiment for exoplanet detection (SPEED) facility aims to improve knowledge and insight into various areas required for gearing up high-contrast imaging instruments adapted to the unprecedented high angular resolution and complexity of the forthcoming extremely large telescopes (ELTs). SPEED combines an ELT simulator, cophasing optics, wavefront control and sha** with a mul…
▽ More
The segmented pupil experiment for exoplanet detection (SPEED) facility aims to improve knowledge and insight into various areas required for gearing up high-contrast imaging instruments adapted to the unprecedented high angular resolution and complexity of the forthcoming extremely large telescopes (ELTs). SPEED combines an ELT simulator, cophasing optics, wavefront control and sha** with a multi-deformable mirror (DM) system, and optimized small inner-working angle (IWA) coronagraphy. The fundamental objective of the SPEED setup is to demonstrate deep contrast into a dark hole optimized for small field of view and very small IWA, adapted to the hunt of exoplanets in the habitable zone around late-type stars. SPEED is designed to implement an optimized small IWA coronagraph: the phase-induced amplitude apodization complex mask coronagraph (PIAACMC). The PIAACMC consists in a multi-zone phase-shifting focal plane mask (FPM) and two apodization mirrors (PIAA-M1 and PIAA-M2), with strong manufacturing specifications. Recently, a first-generation prototype of a PIAACMC optimized for the SPEED facility has been designed and manufactured. The manufacturing components exhibit high optical quality that meets specifications. In this paper, we present how these components have been characterized by a metrological instrument, an interferential microscope, and then we show what is yielded from this characterization for the FPM and the mirrors. Eventually, we discuss the results and the perspectives of the implementation of the PIAACMC components on the SPEED setup.
△ Less
Submitted 18 March, 2021;
originally announced March 2021.
-
The asymmetric inner disk of the Herbig Ae star HD 163296 in the eyes of VLTI/MATISSE: evidence for a vortex?
Authors:
J. Varga,
M. Hogerheijde,
R. van Boekel,
L. Klarmann,
R. Petrov,
L. B. F. M. Waters,
S. Lagarde,
E. Pantin,
Ph. Berio,
G. Weigelt,
S. Robbe-Dubois,
B. Lopez,
F. Millour,
J. -C. Augereau,
H. Meheut,
A. Meilland,
Th. Henning,
W. Jaffe,
F. Bettonvil,
P. Bristow,
K. -H. Hofmann,
A. Matter,
G. Zins,
S. Wolf,
F. Allouche
, et al. (111 additional authors not shown)
Abstract:
Context. The inner few au region of planet-forming disks is a complex environment. High angular resolution observations have a key role in understanding the disk structure and the dynamical processes at work. Aims. In this study we aim to characterize the mid-infrared brightness distribution of the inner disk of the young intermediate-mass star HD 163296, from VLTI/MATISSE observations. Methods. W…
▽ More
Context. The inner few au region of planet-forming disks is a complex environment. High angular resolution observations have a key role in understanding the disk structure and the dynamical processes at work. Aims. In this study we aim to characterize the mid-infrared brightness distribution of the inner disk of the young intermediate-mass star HD 163296, from VLTI/MATISSE observations. Methods. We use geometric models to fit the data. Our models include a smoothed ring, a flat disk with inner cavity, and a 2D Gaussian. The models can account for disk inclination and for azimuthal asymmetries as well. We also perform numerical hydro-dynamical simulations of the inner edge of the disk. Results. Our modeling reveals a significant brightness asymmetry in the L-band disk emission. The brightness maximum of the asymmetry is located at the NW part of the disk image, nearly at the position angle of the semimajor axis. The surface brightness ratio in the azimuthal variation is $3.5 \pm 0.2$. Comparing our result on the location of the asymmetry with other interferometric measurements, we confirm that the morphology of the $r<0.3$ au disk region is time-variable. We propose that this asymmetric structure, located in or near the inner rim of the dusty disk, orbits the star. For the physical origin of the asymmetry, we tested a hypothesis where a vortex is created by Rossby wave instability, and we find that a unique large scale vortex may be compatible with our data. The half-light radius of the L-band emitting region is $0.33\pm 0.01$ au, the inclination is ${52^\circ}^{+5^\circ}_{-7^\circ}$, and the position angle is $143^\circ \pm 3^\circ$. Our models predict that a non-negligible fraction of the L-band disk emission originates inside the dust sublimation radius for $μ$m-sized grains. Refractory grains or large ($\gtrsim 10\ μ$m-sized) grains could be the origin for this emission.
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
-
The Nice Cube (Nice3) nanosatellite project
Authors:
F. Millour,
S. Ottogalli,
M. Maamri,
A. Stibbe,
F. Ferrero,
L. Rolland,
S. Rebeyrolle,
A. Marcotto,
K. Agabi,
M. Beaulieu,
M. Benabdesselam,
J. -B. Caillau,
F. Cauneau,
L. Deneire,
F. Mady,
D. Mary,
A. Memin,
G. Metris,
J. -B. Pomet,
O. Preis,
R. Staraj,
E. Ait Lachgar,
D. Baltazar,
B. Gao,
M. Deroo
, et al. (6 additional authors not shown)
Abstract:
CubeSats are tiny satellites with increasing capabilities. They have been used for more than a decade by universities to train students on space technologies, in a hands-on project aiming at building, launching and operating a real satellite. Still today, one shortcoming of CubeSats is their poor ability to transmit large amounts of data to the ground. A possible way to overcome this limitation re…
▽ More
CubeSats are tiny satellites with increasing capabilities. They have been used for more than a decade by universities to train students on space technologies, in a hands-on project aiming at building, launching and operating a real satellite. Still today, one shortcoming of CubeSats is their poor ability to transmit large amounts of data to the ground. A possible way to overcome this limitation relies on optical communications. Universite Cote d'Azur is studying the feasibility of a student's CubeSat whose main goal is to transmit data with an optical link to the ground at the moderate rate of 1 kb/s (or better). In this paper, we will present the current state of the project and its future developments.
△ Less
Submitted 29 August, 2018;
originally announced August 2018.
-
An overview of the mid-infrared spectro-interferometer MATISSE: science, concept, and current status
Authors:
A. Matter,
B. Lopez,
P. Antonelli,
M. Lehmitz,
F. Bettonvil,
U. Beckmann,
S. Lagarde,
W. Jaffe,
R. G. Petrov,
P. Berio,
F. Millour,
S. Robbe-Dubois,
A. Glindemann,
P. Bristow,
M. Schoeller,
T. Lanz,
T. Henning,
G. Weigelt,
M. Heininger,
S. Morel,
P. Cruzalebes,
K. Meisenheimer,
R. Hofferbert,
S. Wolf,
Y. Bresson
, et al. (82 additional authors not shown)
Abstract:
MATISSE is the second-generation mid-infrared spectrograph and imager for the Very Large Telescope Interferometer (VLTI) at Paranal. This new interferometric instrument will allow significant advances by opening new avenues in various fundamental research fields: studying the planet-forming region of disks around young stellar objects, understanding the surface structures and mass loss phenomena a…
▽ More
MATISSE is the second-generation mid-infrared spectrograph and imager for the Very Large Telescope Interferometer (VLTI) at Paranal. This new interferometric instrument will allow significant advances by opening new avenues in various fundamental research fields: studying the planet-forming region of disks around young stellar objects, understanding the surface structures and mass loss phenomena affecting evolved stars, and probing the environments of black holes in active galactic nuclei. As a first breakthrough, MATISSE will enlarge the spectral domain of current optical interferometers by offering the L and M bands in addition to the N band. This will open a wide wavelength domain, ranging from 2.8 to 13 um, exploring angular scales as small as 3 mas (L band) / 10 mas (N band). As a second breakthrough, MATISSE will allow mid-infrared imaging - closure-phase aperture-synthesis imaging - with up to four Unit Telescopes (UT) or Auxiliary Telescopes (AT) of the VLTI. Moreover, MATISSE will offer a spectral resolution range from R ~ 30 to R ~ 5000. Here, we present one of the main science objectives, the study of protoplanetary disks, that has driven the instrument design and motivated several VLTI upgrades (GRA4MAT and NAOMI). We introduce the physical concept of MATISSE including a description of the signal on the detectors and an evaluation of the expected performances. We also discuss the current status of the MATISSE instrument, which is entering its testing phase, and the foreseen schedule for the next two years that will lead to the first light at Paranal.
△ Less
Submitted 8 August, 2016;
originally announced August 2016.
-
Current results of the PERSEE testbench: the cophasing control and the polychromatic null rate
Authors:
Julien Lozi,
Frederic Cassaing,
Jean-Michel Le Duigou,
Beatrice Sorrente,
Jospeh Montri,
Jean-Michel Reess,
Emilie Lhome,
Tristan Buey,
Francois Henault,
Aurelie Marcotto,
Paul Girard,
Marc Barillot,
Marc Ollivier,
Vincent Coude du Foresto
Abstract:
Stabilizing a nulling interferometer at a nanometric level is the key issue to obtain deep null depths. The PERSEE breadboard has been designed to study and optimize the operation of a cophased nulling bench in the most realistic disturbing environment of a space mission. This presentation focuses on the current results of the PERSEE bench. In terms of metrology, we cophased at 0.33 nm rms for the…
▽ More
Stabilizing a nulling interferometer at a nanometric level is the key issue to obtain deep null depths. The PERSEE breadboard has been designed to study and optimize the operation of a cophased nulling bench in the most realistic disturbing environment of a space mission. This presentation focuses on the current results of the PERSEE bench. In terms of metrology, we cophased at 0.33 nm rms for the piston and 80 mas rms for the tip/tilt (0.14% of the Airy disk). A Linear Quadratic Gaussian (LQG) control coupled with an unsupervised vibration identification allows us to maintain that level of correction, even with characteristic vibrations of nulling interferometry space missions. These performances, with an accurate design and alignment of the bench, currently lead to a polychromatic unpolarised null depth of 8.9E-6 stabilized at 3E-7 on the [1.65-2.45] \mum spectral band (37% bandwidth).
△ Less
Submitted 14 September, 2011;
originally announced September 2011.
-
The binary Be star δ Sco at high spectral and spatial resolution: Disk geometry and kinematics before the 2011 periastron
Authors:
Anthony Meilland,
O. Delaa,
Philippe Stee,
Samer Kanaan,
Florentin Millour,
Denis Mourard,
Daniel Bonneau,
Romain Petrov,
Nicolas Nardetto,
Aurelie Marcotto,
Jean-Michel Clausse,
Karine Perraut,
H. Mcalister,
Theo A. Ten Brummelaar,
J. Sturmann,
L. Sturmann,
N. Turner,
S. T. Ridgway,
C. Farrington,
P. J. Goldfinger,
C. Farrington
Abstract:
Classical Be stars are hot non-supergiant stars surrounded by a gaseous circumstellar disk that is responsible for the observed IR-excess and emission lines. The influence of binarity on these phenomena remains controversial. delta Sco is a binary system whose primary suddently began to exhibit the Be phenomenon at the last periastron in 2000. We want to constrain the geometry and kinematics of it…
▽ More
Classical Be stars are hot non-supergiant stars surrounded by a gaseous circumstellar disk that is responsible for the observed IR-excess and emission lines. The influence of binarity on these phenomena remains controversial. delta Sco is a binary system whose primary suddently began to exhibit the Be phenomenon at the last periastron in 2000. We want to constrain the geometry and kinematics of its circumstellar environment. We observed the star between 2007 and 2010 using spectrally-resolved interferometry with the VLTI/AMBER and CHARA/VEGA instruments. We found orbital elements that are compatible with previous estimates. The next periastron should take place around July 5, 2011 (+- 4,days). We resolved the circumstellar disk in the HAlpha (FWHM = 4.8+-1.5mas), BrGamma (FWHM = 2.9 0.,mas), and the 2.06$ μ$m HeI (FWHM = 2.4+-0.3mas) lines as well as in the K band continuum (FWHM ~2.4mas). The disk kinematics are dominated by the rotation, with a disk expansion velocity on the order of 0.2km/s. The rotation law within the disk is compatible with Keplerian rotation. As the star probably rotates at about 70% of its critical velocity the ejection of matter doesn't seems to be dominated by rotation. However, the disk geometry and kinematics are similar to that of the previously studied quasi-critically rotating Be stars, namely Alpha Ara, Psi Per and 48 Per.
△ Less
Submitted 9 June, 2011;
originally announced June 2011.
-
The fundamental parameters of the roAp star $γ$ Equulei
Authors:
K. Perraut,
I. Brandão,
D. Mourard,
M. Cunha,
Ph. Bério,
D. Bonneau,
O. Chesneau,
J. M. Clausse,
O. Delaa,
A. Marcotto,
A. Roussel,
A. Spang,
Ph. Stee,
I. Tallon-Bosc,
H. McAlister,
T. ten Brummelaar,
J. Sturmann,
L. Sturmann,
N. Turner,
C. Farrington,
P. J. Goldfinger
Abstract:
Physical processes working in the stellar interiors as well as the evolution of stars depend on some fundamental stellar properties, such as mass, radius, luminosity, and chemical abundances. A classical way to test stellar interior models is to compare the predicted and observed location of a star on theoretical evolutionary tracks in a H-R diagram. This requires the best possible determinations…
▽ More
Physical processes working in the stellar interiors as well as the evolution of stars depend on some fundamental stellar properties, such as mass, radius, luminosity, and chemical abundances. A classical way to test stellar interior models is to compare the predicted and observed location of a star on theoretical evolutionary tracks in a H-R diagram. This requires the best possible determinations of stellar mass, radius, luminosity and abundances. To derive its fundamental parameters, we observed the well-known rapidly oscillating Ap star, $γ$ Equ, using the visible spectro-interferometer VEGA installed on the optical CHARA array. We computed the calibrated squared visibility and derived the limb-darkened diameter. We used the whole energy flux distribution, the parallax and this angular diameter to determine the luminosity and the effective temperature of the star. We obtained a limb-darkened angular diameter of 0.564~$\pm$~0.017~mas and deduced a radius of $R$~=~2.20~$\pm$~0.12~${\rm R_{\odot}}$. Without considering the multiple nature of the system, we derived a bolometric flux of $(3.12\pm 0.21)\times 10^{-7}$ erg~cm$^{-2}$~s$^{-1}$ and an effective temperature of 7364~$\pm$~235~K, which is below the effective temperature that has been previously determined. Under the same conditions we found a luminosity of $L$~=~12.8~$\pm$~1.4~${\rm L_{\odot}}$. When the contribution of the closest companion to the bolometric flux is considered, we found that the effective temperature and luminosity of the primary star can be, respectively, up to $\sim$~100~K and up to $\sim$~0.8~L$_\odot$ smaller than the values mentioned above.These new values of the radius and effective temperature should bring further constraints on the asteroseismic modelling of the star.
△ Less
Submitted 9 November, 2010;
originally announced November 2010.
-
An investigation of the close environment of beta Cep with the VEGA/CHARA interferometer
Authors:
N. Nardetto,
D. Mourard,
I. Tallon-Bosc,
M. Tallon,
P. Berio,
E. Chapellier,
D. Bonneau,
O. Chesneau,
P. Mathias,
K. Perraut,
P. Stee,
A. Blazit,
J. M. Clausse,
O. Delaa,
A. Marcotto,
F. Millour,
A. Roussel,
A. Spang,
H. McAlister,
T. ten Brummelaar,
J. Sturmann,
L. Sturmann,
N. Turner,
C. Farrington,
P. J. Goldfinger
Abstract:
High-precision interferometric measurements of pulsating stars help to characterize their close environment. In 1974, a close companion was discovered around the pulsating star beta Cep using the speckle interferometry technique and features at the limit of resolution (20 milli-arcsecond or mas) of the instrument were mentioned that may be due to circumstellar material. Beta Cep has a magnetic fie…
▽ More
High-precision interferometric measurements of pulsating stars help to characterize their close environment. In 1974, a close companion was discovered around the pulsating star beta Cep using the speckle interferometry technique and features at the limit of resolution (20 milli-arcsecond or mas) of the instrument were mentioned that may be due to circumstellar material. Beta Cep has a magnetic field that might be responsible for a spherical shell or ring-like structure around the star as described by the MHD models. Using the visible recombiner VEGA installed on the CHARA long-baseline interferometer at Mt. Wilson, we aim to determine the angular diameter of beta Cep and resolve its close environment with a spatial resolution up to 1 mas level. Medium spectral resolution (R=6000) observations of beta Cep were secured with the VEGA instrument over the years 2008 and 2009. These observations were performed with the S1S2 (30m) and W1W2 (100m) baselines of the array. We investigated several models to reproduce our observations. A large-scale structure of a few mas is clearly detected around the star with a typical flux relative contribution of 0.23 +- 0.02. Our best model is a co-rotational geometrical thin ring around the star as predicted by magnetically-confined wind shock models. The ring inner diameter is 8.2 +- 0.8 mas and the width is 0.6 +- 0.7 mas. The orientation of the rotation axis on the plane of the sky is PA = 60 +- 1 deg, while the best fit of the mean angular diameter of beta Cep gives UD[V] = 0.22 +- 0.05 mas. Our data are compatible with the predicted position of the close companion of beta Cep. These results bring additional constraints on the fundamental parameters and on the future MHD and asteroseismological models of the star.
△ Less
Submitted 11 October, 2010;
originally announced October 2010.
-
PERSEE: Experimental results on the cophased nulling bench
Authors:
Julien Lozi,
Frédéric Cassaing,
Jean-Michel Le Duigou,
Kamel Houairi,
Béatrice Sorrente,
Joseph Montri,
Sophie Jacquinod,
Jean-Michel Reess,
Laurie Pham,
Emilie Lhomé,
Tristan Buey,
François Hénault,
Aurélie Marcotto,
Paul Girard,
Nicolas Mauclert,
Marc Barillot,
Vincent Coudé du Foresto,
Marc Ollivier
Abstract:
Nulling interferometry is still a promising method to characterize spectra of exoplanets. One of the main issues is to cophase at a nanometric level each arm despite satellite disturbances. The bench PERSEE aims to prove the feasibility of that technique for spaceborne missions. After a short description of PERSEE, we will first present the results obtained in a simplified configuration: we have c…
▽ More
Nulling interferometry is still a promising method to characterize spectra of exoplanets. One of the main issues is to cophase at a nanometric level each arm despite satellite disturbances. The bench PERSEE aims to prove the feasibility of that technique for spaceborne missions. After a short description of PERSEE, we will first present the results obtained in a simplified configuration: we have cophased down to 0.22 nm rms in optical path difference (OPD) and 60 mas rms in tip/tilt, and have obtained a monochromatic null of 3E-5 stabilized at 3E-6. The goal of 1 nm with additional typical satellite disturbances requires the use of an optimal control law; that is why we elaborated a dedicated Kalman filter. Simulations and experiments show a good rejection of disturbances. Performance of the bench should be enhanced by using a Kalman control law, and we should be able to reach the desired nanometric stability. Following, we will present the first results of the final polychromatic configuration, which includes an achromatic phase shifter, perturbators and optical delay lines. As a conclusion, we give the first more general lessons we have already learned from this experiment, both at system and component levels for a future space mission.
△ Less
Submitted 18 August, 2010;
originally announced August 2010.
-
Time, spatial, and spectral resolution of the Halpha line-formation region of Deneb and Rigel with the VEGA/CHARA interferometer
Authors:
Olivier Chesneau,
Luc Dessart,
D. Mourard,
Ph. Berio,
Ch. Buil,
D. Bonneau,
M. Borges Fernandes,
J. M. Clausse,
O. Delaa,
A. Marcotto,
A. Meilland,
F. Millour,
N. Nardetto,
K. Perraut,
A. Roussel,
A. Spang,
Ph. Stee,
I. Tallon-Bosc,
Harold A. Mcalister,
T. A. Ten Brummelaar,
J. Sturmann,
L. Sturmann,
N. Turner,
C. Farrington,
P. J. Goldfinger
Abstract:
BA-type supergiants are amongst the most optically-bright stars. They are observable in extragalactic environments, hence potential accurate distance indicators. Emission activity in the Halpha line of the BA supergiants Rigel (B8Ia) and Deneb (A2Ia) is indicative of presence of localized time-dependent mass ejections. Here, we employ optical interferometry to study the Halpha line-formation regio…
▽ More
BA-type supergiants are amongst the most optically-bright stars. They are observable in extragalactic environments, hence potential accurate distance indicators. Emission activity in the Halpha line of the BA supergiants Rigel (B8Ia) and Deneb (A2Ia) is indicative of presence of localized time-dependent mass ejections. Here, we employ optical interferometry to study the Halpha line-formation region in these stellar environments. High spatial- (0.001 arcsec) and spectral- (R=30 000) resolution observations of Halpha were obtained with the visible recombiner VEGA installed on the CHARA interferometer, using the S1S2 array-baseline (34m). Six independent observations were done on Deneb over the years 2008 and 2009, and two on Rigel in 2009. We analyze this dataset with the 1D non-LTE radiative-transfer code CMFGEN, and assess the impact of the wind on the visible and near-IR interferometric signatures, using both Balmer-line and continuum photons. We observe a visibility decrease in Halpha for both Rigel and Deneb, suggesting that the line-formation region is extended (1.5-1.75 R*). We observe a significant visibility decrease for Deneb in the SiII6371 line. We witness time variations in the differential phase for Deneb, implying an inhomogeneous and unsteady circumstellar environment, while no such variability is seen in differential visibilities. Radiative-transfer modeling of Deneb, with allowance for stellar-wind mass loss, accounts fairly well for the observed decrease in the Halpha visibility. Based on the observed differential visibilities, we estimate that the mass-loss rate of Deneb has changed by less than 5%.
△ Less
Submitted 13 July, 2010;
originally announced July 2010.
-
The H$α$ line forming region of AB Aur spatially resolved at sub-AU with the VEGA/CHARA spectro-interferometer
Authors:
K. Perraut,
M. Benisty,
D. Mourard,
S. Rajabi,
F. Bacciotti,
Ph. Bério,
D. Bonneau,
O. Chesneau,
J. M. Clausse,
O. Delaa,
A. Marcotto,
A. Roussel,
A. Spang,
Ph. Stee,
I. Tallon-Bosc,
H. McAlister,
T. ten Brummelaar,
J. Sturmann,
L. Sturmann,
N. Turner,
C. Farrington,
P. J. Goldfinger
Abstract:
A crucial issue in star formation is to understand the physical mechanism by which mass is accreted onto and ejected by a young star. The visible spectrometer VEGA on the CHARA array can be an efficient means of probing the structure and the kinematics of the hot circumstellar gas at sub-AU. For the first time, we observed the Herbig Ae star AB Aur in the H$α$ emission line, using the VEGA low spe…
▽ More
A crucial issue in star formation is to understand the physical mechanism by which mass is accreted onto and ejected by a young star. The visible spectrometer VEGA on the CHARA array can be an efficient means of probing the structure and the kinematics of the hot circumstellar gas at sub-AU. For the first time, we observed the Herbig Ae star AB Aur in the H$α$ emission line, using the VEGA low spectral resolution on two baselines of the array. We computed and calibrated the spectral visibilities between 610 nm and 700 nm. To simultaneously reproduce the line profile and the visibility, we used a 1-D radiative transfer code that calculates level populations for hydrogen atoms in a spherical geometry and synthetic spectro-interferometric observables. We clearly resolved AB Aur in the H$α$ line and in a part of the continuum, even at the smallest baseline of 34 m. The small P-Cygni absorption feature is indicative of an outflow but could not be explained by a spherical stellar wind model. Instead, it favors a magneto-centrifugal X-disk or disk-wind geometry. The fit of the spectral visibilities could not be accounted for by a wind alone, so we considered a brightness asymmetry possibly caused by large-scale nebulosity or by the known spiral structures, inducing a visibility modulation around H$α$. Thanks to the unique capabilities of VEGA, we managed to simultaneously record for the first time a spectrum at a resolution of 1700 and spectral visibilities in the visible range on a target as faint as $m_{V}$ = 7.1. It was possible to rule out a spherical geometry for the wind of AB Aur and provide realistic solutions to account for the H$α$ emission compatible with magneto-centrifugal acceleration. The study illustrates the advantages of optical interferometry and motivates observations of other bright young stars to shed light on the accretion/ejection processes.
△ Less
Submitted 28 May, 2010;
originally announced May 2010.