-
Single-mode waveguides for GRAVITY II. Single-mode fibers and Fiber Control Unit
Authors:
G. Perrin,
L. Jocou,
K. Perraut,
J. Ph. Berger,
R. Dembet,
P. Fédou,
S. Lacour,
F. Chapron,
C. Collin,
S. Poulain,
V. Cardin,
F. Joulain,
F. Eisenhauer,
X. Haubois,
S. Gillessen,
M. Haug,
F. Hausmann,
P. Kervella,
P. Léna,
M. Lippa,
O. Pfuh,
S. Rabien,
A. Amorim,
W. Brandner,
C. Straubmeier
Abstract:
The 2nd generation VLTI instrument GRAVITY is a two-field infrared interferometer operating in the K band between 1.97 and 2.43 $μ$m with either the four 8 m or the four 1.8 m telescopes of the Very Large Telescope (VLT). Beams collected by the telescopes are corrected with adaptive optics systems and the fringes are stabilized with a fringe-tracking system. A metrology system allows the measureme…
▽ More
The 2nd generation VLTI instrument GRAVITY is a two-field infrared interferometer operating in the K band between 1.97 and 2.43 $μ$m with either the four 8 m or the four 1.8 m telescopes of the Very Large Telescope (VLT). Beams collected by the telescopes are corrected with adaptive optics systems and the fringes are stabilized with a fringe-tracking system. A metrology system allows the measurement of internal path lengths in order to achieve high-accuracy astrometry. High sensitivity and high interferometric accuracy are achieved thanks to (i) correction of the turbulent phase, (ii) the use of low-noise detectors, and (iii) the optimization of photometric and coherence throughput. Beam combination and most of the beam transport are performed with single-mode waveguides in vacuum and at low temperature. In this paper, we present the functions and performance achieved with weakly birefringent standard single-mode fiber systems in GRAVITY. Fibered differential delay lines (FDDLs) are used to dynamically compensate for up to 6 mm of delay between the science and reference targets. Fibered polarization rotators allow us to align polarizations in the instrument and make the single-mode beam combiner close to polarization neutral. The single-mode fiber system exhibits very low birefringence (less than 23°), very low attenuation (3.6-7 dB/km across the K band), and optimized differential dispersion (less than 2.04 $μ$rad cm2 at zero extension of the FDDLs). As a consequence, the typical fringe contrast losses due to the single-mode fibers are 6% to 10% in the lowest-resolution mode and 5% in the medium- and high-resolution modes of the instrument for a photometric throughput of the fiber chain of the order of 90%. There is no equivalent of this fiber system to route and modally filter beams with delay and polarization control in any other K-band beamcombiner.
△ Less
Submitted 19 January, 2024;
originally announced January 2024.
-
First direct detection of an exoplanet by optical interferometry; Astrometry and K-band spectroscopy of HR8799 e
Authors:
S. Lacour,
M. Nowak,
J. Wang,
O. Pfuhl,
F. Eisenhauer,
R. Abuter,
A. Amorim,
N. Anugu,
M. Benisty,
J. P. Berger,
H. Beust,
N. Blind,
M. Bonnefoy,
H. Bonnet,
P. Bourget,
W. Brandner,
A. Buron,
C. Collin,
B. Charnay,
F. Chapron,
Y. Clénet,
V. Coudé du Foresto,
P. T. de Zeeuw,
C. Deen,
R. Dembet
, et al. (63 additional authors not shown)
Abstract:
To date, infrared interferometry at best achieved contrast ratios of a few times $10^{-4}$ on bright targets. GRAVITY, with its dual-field mode, is now capable of high contrast observations, enabling the direct observation of exoplanets. We demonstrate the technique on HR8799, a young planetary system composed of four known giant exoplanets. We used the GRAVITY fringe tracker to lock the fringes o…
▽ More
To date, infrared interferometry at best achieved contrast ratios of a few times $10^{-4}$ on bright targets. GRAVITY, with its dual-field mode, is now capable of high contrast observations, enabling the direct observation of exoplanets. We demonstrate the technique on HR8799, a young planetary system composed of four known giant exoplanets. We used the GRAVITY fringe tracker to lock the fringes on the central star, and integrated off-axis on the HR8799e planet situated at 390 mas from the star. Data reduction included post-processing to remove the flux leaking from the central star and to extract the coherent flux of the planet. The inferred K band spectrum of the planet has a spectral resolution of 500. We also derive the astrometric position of the planet relative to the star with a precision on the order of 100$\,μ$as. The GRAVITY astrometric measurement disfavors perfectly coplanar stable orbital solutions. A small adjustment of a few degrees to the orbital inclination of HR 8799 e can resolve the tension, implying that the orbits are close to, but not strictly coplanar. The spectrum, with a signal-to-noise ratio of $\approx 5$ per spectral channel, is compatible with a late-type L brown dwarf. Using Exo-REM synthetic spectra, we derive a temperature of $1150\pm50$\,K and a surface gravity of $10^{4.3\pm0.3}\,$cm/s$^{2}$. This corresponds to a radius of $1.17^{+0.13}_{-0.11}\,R_{\rm Jup}$ and a mass of $10^{+7}_{-4}\,M_{\rm Jup}$, which is an independent confirmation of mass estimates from evolutionary models. Our results demonstrate the power of interferometry for the direct detection and spectroscopic study of exoplanets at close angular separations from their stars.
△ Less
Submitted 28 March, 2019;
originally announced March 2019.
-
PHIBSS2: survey design and z=0.5-0.8 results. Molecular gas reservoirs during the winding-down of star formation
Authors:
J. Freundlich,
F. Combes,
L. J. Tacconi,
R. Genzel,
S. Garcia-Burillo,
R. Neri,
T. Contini,
A. Bolatto,
S. Lilly,
P. Salomé,
I. C. Bicalho,
J. Boissier,
F. Boone,
N. Bouché,
F. Bournaud,
A. Burkert,
M. Carollo,
M. C. Cooper,
P. Cox,
C. Feruglio,
N. M. Förster Schreiber,
S. Juneau,
M. Lippa,
D. Lutz,
T. Naab
, et al. (7 additional authors not shown)
Abstract:
Following the success of the Plateau de Bure high-z Blue Sequence Survey (PHIBSS), we present the PHIBSS2 legacy program, a survey of the molecular gas properties of star-forming galaxies on and around the star formation main sequence (MS) at different redshifts using NOEMA. This survey significantly extends the existing sample of star-forming galaxies with CO molecular gas measurements, probing t…
▽ More
Following the success of the Plateau de Bure high-z Blue Sequence Survey (PHIBSS), we present the PHIBSS2 legacy program, a survey of the molecular gas properties of star-forming galaxies on and around the star formation main sequence (MS) at different redshifts using NOEMA. This survey significantly extends the existing sample of star-forming galaxies with CO molecular gas measurements, probing the peak epoch of star formation (z=1-1.6) as well as its building-up (z=2-3) and winding-down (z=0.5-0.8) phases. The targets are drawn from the GOODS, COSMOS, and AEGIS deep fields and uniformly sample the MS in the stellar mass (M*) - star formation rate (SFR) plane with log(M*/Msun) = 10-11.8. We describe the survey strategy and sample selection before focusing on the results obtained at z=0.5-0.8, where we report 60 CO(2-1) detections out of 61 targets. We determine their molecular gas masses and separately obtain disc sizes and bulge-to-total (B/T) luminosity ratios from HST I-band images. The median molecular gas-to-stellar mass ratio, gas fraction, and depletion time as well as their dependence with M* and offset from the MS follow published scaling relations for a much larger sample of galaxies spanning a wider range of redshifts. The galaxy-averaged Kennicutt-Schmidt (KS) relation between molecular gas and SFR surface densities is strikingly linear, pointing towards similar star formation timescales within galaxies at any given epoch. In terms of morphology, the molecular gas content, the SFR, the disc stellar mass, and the disc molecular gas fraction do not seem to correlate with B/T and the stellar surface density, which suggests an ongoing supply of fresh molecular gas to compensate for the build-up of the bulge. Our measurements do not yield any significant variation of the depletion time with B/T and hence no strong evidence for morphological quenching within the scatter of the MS.
△ Less
Submitted 17 January, 2019; v1 submitted 19 December, 2018;
originally announced December 2018.
-
Detection of orbital motions near the last stable circular orbit of the massive black hole SgrA*
Authors:
GRAVITY Collaboration,
R. Abuter,
A. Amorim,
M. Bauböck,
J. P. Berger,
H. Bonnet,
W. Brandner,
Y. Clénet,
V. Coudé du Foresto,
P. T. de Zeeuw,
C. Deen,
J. Dexter,
G. Duvert,
A. Eckart,
F. Eisenhauer,
N. M. Förster Schreiber,
P. Garcia,
F. Gao,
E. Gendron,
R. Genzel,
S. Gillessen,
P. Guajardo,
M. Habibi,
X. Haubois,
Th. Henning
, et al. (35 additional authors not shown)
Abstract:
We report the detection of continuous positional and polarization changes of the compact source SgrA* in high states ('flares') of its variable near- infrared emission with the near-infrared GRAVITY-Very Large Telescope Interferometer (VLTI) beam-combining instrument. In three prominent bright flares, the position centroids exhibit clockwise looped motion on the sky, on scales of typically 150 mic…
▽ More
We report the detection of continuous positional and polarization changes of the compact source SgrA* in high states ('flares') of its variable near- infrared emission with the near-infrared GRAVITY-Very Large Telescope Interferometer (VLTI) beam-combining instrument. In three prominent bright flares, the position centroids exhibit clockwise looped motion on the sky, on scales of typically 150 micro-arcseconds over a few tens of minutes, corresponding to about 30% the speed of light. At the same time, the flares exhibit continuous rotation of the polarization angle, with about the same 45(+/-15)-minute period as that of the centroid motions. Modelling with relativistic ray tracing shows that these findings are all consistent with a near face-on, circular orbit of a compact polarized 'hot spot' of infrared synchrotron emission at approximately six to ten times the gravitational radius of a black hole of 4 million solar masses. This corresponds to the region just outside the innermost, stable, prograde circular orbit (ISCO) of a Schwarzschild-Kerr black hole, or near the retrograde ISCO of a highly spun-up Kerr hole. The polarization signature is consistent with orbital motion in a strong poloidal magnetic field.
△ Less
Submitted 30 October, 2018;
originally announced October 2018.
-
Multiple Star Systems in the Orion Nebula
Authors:
GRAVITY collaboration,
Martina Karl,
Oliver Pfuhl,
Frank Eisenhauer,
Reinhard Genzel,
Rebekka Grellmann,
Maryam Habibi,
Roberto Abuter,
Matteo Accardo,
António Amorim,
Narsireddy Anugu,
Gerardo Ávila,
Myriam Benisty,
Jean-Philippe Berger,
Nicolas Bland,
Henri Bonnet,
Pierre Bourget,
Wolfgang Brandner,
Roland Brast,
Alexander Buron,
Alessio Caratti o Garatti,
Frédéric Chapron,
Yann Clénet,
Claude Collin,
Vincent Coudé du Foresto
, et al. (111 additional authors not shown)
Abstract:
This work presents an interferometric study of the massive-binary fraction in the Orion Trapezium Cluster with the recently comissioned GRAVITY instrument. We observe a total of 16 stars of mainly OB spectral type. We find three previously unknown companions for $θ^1$ Ori B, $θ^2$ Ori B, and $θ^2$ Ori C. We determine a separation for the previously suspected companion of NU Ori. We confirm four co…
▽ More
This work presents an interferometric study of the massive-binary fraction in the Orion Trapezium Cluster with the recently comissioned GRAVITY instrument. We observe a total of 16 stars of mainly OB spectral type. We find three previously unknown companions for $θ^1$ Ori B, $θ^2$ Ori B, and $θ^2$ Ori C. We determine a separation for the previously suspected companion of NU Ori. We confirm four companions for $θ^1$ Ori A, $θ^1$ Ori C, $θ^1$ Ori D, and $θ^2$ Ori A, all with substantially improved astrometry and photometric mass estimates. We refine the orbit of the eccentric high-mass binary $θ^1$ Ori C and we are able to derive a new orbit for $θ^1$ Ori D. We find a system mass of 21.7 $M_{\odot}$ and a period of $53$ days. Together with other previously detected companions seen in spectroscopy or direct imaging, eleven of the 16 high-mass stars are multiple systems. We obtain a total number of 22 companions with separations up to 600 AU. The companion fraction of the early B and O stars in our sample is about 2, significantly higher than in earlier studies of mostly OB associations. The separation distribution hints towards a bimodality. Such a bimodality has been previously found in A stars, but rarely in OB binaries, which up to this point have been assumed to be mostly compact with a tail of wider companions. We also do not find a substantial population of equal-mass binaries. The observed distribution of mass ratios declines steeply with mass, and like the direct star counts, indicates that our companions follow a standard power law initial mass function. Again, this is in contrast to earlier findings of flat mass ratio distributions in OB associations. We exclude collision as a dominant formation mechanism but find no clear preference for core accretion or competitive accretion.
△ Less
Submitted 27 September, 2018;
originally announced September 2018.
-
GRAVITY chromatic imaging of Eta Car's core
Authors:
GRAVITY Collaboration,
J. Sanchez-Bermudez,
G. Weigelt,
J. M. Bestenlehner,
P. Kervella,
W. Brandner,
Th. Henning,
A. Müller,
G. Perrin,
J. -U. Pott,
M. Schöller,
R. van Boekel,
R. Abuter,
M. Accardo,
A. Amorim,
N. Anugu,
G. Ávila,
M. Benisty,
J. P. Berger,
N. Blind,
H. Bonnet,
P. Bourget,
R. Brast,
A. Buron,
F. Cantalloube
, et al. (110 additional authors not shown)
Abstract:
Eta Car is one of the most intriguing luminous blue variables in the Galaxy. Observations and models at different wavelengths suggest a central binary with a 5.54 yr period residing in its core. 2D and 3D radiative transfer and hydrodynamic simulations predict a primary with a dense and slow stellar wind that interacts with the faster and lower density wind of the secondary. The wind-wind collisio…
▽ More
Eta Car is one of the most intriguing luminous blue variables in the Galaxy. Observations and models at different wavelengths suggest a central binary with a 5.54 yr period residing in its core. 2D and 3D radiative transfer and hydrodynamic simulations predict a primary with a dense and slow stellar wind that interacts with the faster and lower density wind of the secondary. The wind-wind collision scenario suggests that the secondary's wind penetrates the primary's wind creating a low-density cavity in it, with dense walls where the two winds interact. We aim to trace the inner ~5-50 au structure of Eta Car's wind-wind interaction, as seen through BrG and, for the first time, through the He I 2s-2p line. We have used spectro-interferometric observations with GRAVITY at the VLTI. Our modeling of the continuum allows us to estimate its FWHM angular size close to 2 mas and an elongation ratio of 1.06 +/- 0.05 over a PA = 130 +/- 20 deg. Our CMFGEN modeling helped us to confirm that the role of the secondary should be taken into account to properly reproduce the observed BrG and He I lines. Chromatic images across BrG reveal a southeast arc-like feature, possibly associated to the hot post-shocked winds flowing along the cavity wall. The images of He I 2s-2p served to constrain the 20 mas structure of the line-emitting region. The observed morphology of He I suggests that the secondary is responsible for the ionized material that produces the line profile. Both the BrG and the He I 2s-2p maps are consistent with previous hydrodynamical models of the colliding wind scenario. Future dedicated simulations together with an extensive interferometric campaign are necessary to refine our constraints on the wind and stellar parameters of the binary, which finally will help us predict the evolutionary path of Eta Car.
△ Less
Submitted 6 August, 2018;
originally announced August 2018.
-
Detection of the gravitational redshift in the orbit of the star S2 near the Galactic centre massive black hole
Authors:
GRAVITY Collaboration,
R. Abuter,
A. Amorim,
N. Anugu,
M. Bauböck,
M. Benisty,
J. P. Berger,
N. Blind,
H. Bonnet,
W. Brandner,
A. Buron,
C. Collin,
F. Chapron,
Y. Clénet,
V. Coudé du Foresto,
P. T. de Zeeuw,
C. Deen,
F. Delplancke-Ströbele,
R. Dembet,
J. Dexter,
G. Duvert,
A. Eckart,
F. Eisenhauer,
G. Finger,
N. M. Förster Schreiber
, et al. (73 additional authors not shown)
Abstract:
The highly elliptical, 16-year-period orbit of the star S2 around the massive black hole candidate Sgr A* is a sensitive probe of the gravitational field in the Galactic centre. Near pericentre at 120 AU, ~1400 Schwarzschild radii, the star has an orbital speed of ~7650 km/s, such that the first-order effects of Special and General Relativity have now become detectable with current capabilities. O…
▽ More
The highly elliptical, 16-year-period orbit of the star S2 around the massive black hole candidate Sgr A* is a sensitive probe of the gravitational field in the Galactic centre. Near pericentre at 120 AU, ~1400 Schwarzschild radii, the star has an orbital speed of ~7650 km/s, such that the first-order effects of Special and General Relativity have now become detectable with current capabilities. Over the past 26 years, we have monitored the radial velocity and motion on the sky of S2, mainly with the SINFONI and NACO adaptive optics instruments on the ESO Very Large Telescope, and since 2016 and leading up to the pericentre approach in May 2018, with the four-telescope interferometric beam-combiner instrument GRAVITY. From data up to and including pericentre, we robustly detect the combined gravitational redshift and relativistic transverse Doppler effect for S2 of z ~ 200 km/s / c with different statistical analysis methods. When parameterising the post-Newtonian contribution from these effects by a factor f, with f = 0 and f = 1 corresponding to the Newtonian and general relativistic limits, respectively, we find from posterior fitting with different weighting schemes f = 0.90 +/- 0.09 (stat) +\- 0.15 (sys). The S2 data are inconsistent with pure Newtonian dynamics.
△ Less
Submitted 24 July, 2018;
originally announced July 2018.
-
Millimeter map** at z~1: dust-obscured bulge building and disk growth
Authors:
Erica J. Nelson,
Ken-ichi Tadaki,
Linda J. Tacconi,
Dieter Lutz,
Natascha M. Forster Schreiber,
Anna Cibinel,
Stijn Wuyts,
Philipp Lang,
Mireia Montes,
Pascal A. Oesch,
Sirio Belli,
Rebecca L. Davies,
Richard I. Davies,
Reinhard Genzel,
Magdalena Lippa,
Sedona H. Price,
Hannah Ubler,
Emily Wisnioski
Abstract:
A randomly chosen star in today's Universe is most likely to live in a galaxy with a stellar mass between that of the Milky Way and Andromeda. Yet it remains uncertain how the structural evolution of these bulge-disk systems proceeded. Most of the unobscured star formation we observe building Andromdeda progenitors at 0.7<z<1.5 occurs in disks, but >90% of their star formation is reprocessed by du…
▽ More
A randomly chosen star in today's Universe is most likely to live in a galaxy with a stellar mass between that of the Milky Way and Andromeda. Yet it remains uncertain how the structural evolution of these bulge-disk systems proceeded. Most of the unobscured star formation we observe building Andromdeda progenitors at 0.7<z<1.5 occurs in disks, but >90% of their star formation is reprocessed by dust and remains unaccounted for. Here we map 500micron dust continuum emission in an Andromeda progenitor at z=1.25 to probe where it is growing through dust-obscured star formation. Combining resolved dust measurements from the NOEMA interferometer with Hubble Space Telescope Halpha maps and multicolor imaging (including new UV data from the HDUV survey), we find a bulge growing by dust-obscured star formation: while the unobscured star formation is centrally suppressed, the dust continuum is centrally concentrated, filling in the ring-like structures evident in the Halpha and UV emission. Reflecting this, the dust emission is more compact than the optical/UV tracers of star formation with r_e(dust)=3.4kpc, r_e(Halpha)/r_e(dust)=1.4, and r_e(UV)/r_e(dust)=1.8. Crucially, however, the bulge and disk of this galaxy are building simultaneously; although the dust emission is more compact than the rest-optical emission (r_e(optical)/r_e(dust)=1.4), it is somewhat less compact than the stellar mass (r_e(M_*)/r_e(dust)=0.9). Taking the 500micron emission as a tracer of star formation, the expected structural evolution of this galaxy can be accounted for by star formation: it will grow in size by Delta(r_e)/Delta(M_*)~0.3 and central surface density by Delta(Sigma_cen)/Delta(M_*)~0.9. Finally, our observations are consistent with a picture in which merging and disk instabilities drive gas to the center of galaxies, boosting global star formation rates above the main sequence and building bulges.
△ Less
Submitted 8 January, 2018;
originally announced January 2018.
-
The wind and the magnetospheric accretion onto the T Tauri star S Coronae Australis at sub-au resolution
Authors:
R. Garcia Lopez,
K. Perraut,
A. Caratti o Garatti,
B. Lazareff,
J. Sanchez-Bermudez,
M. Benisty,
C. Dougados,
L. Labadie,
W. Brandner,
P. J. V. Garcia,
Th. Henning,
T. P. Ray,
R. Abuter,
A. Amorim,
N. Anugu,
J. P. Berger,
H. Bonnet,
A. Buron,
P. Caselli,
Y. Clénet,
V. Coudé du Foresto,
W. de Wit,
C. Deen,
F. Delplancke-Ströbele,
J. Dexter
, et al. (48 additional authors not shown)
Abstract:
To investigate the inner regions of protoplanetary disks, we performed near-infrared interferometric observations of the classical TTauri binary system S CrA. We present the first VLTI-GRAVITY high spectral resolution ($R\sim$4000) observations of a classical TTauri binary, S CrA (composed of S CrA N and S CrA S and separated by $\sim$1.4"), combining the four 8-m telescopes in dual-field mode. Ou…
▽ More
To investigate the inner regions of protoplanetary disks, we performed near-infrared interferometric observations of the classical TTauri binary system S CrA. We present the first VLTI-GRAVITY high spectral resolution ($R\sim$4000) observations of a classical TTauri binary, S CrA (composed of S CrA N and S CrA S and separated by $\sim$1.4"), combining the four 8-m telescopes in dual-field mode. Our observations in the near-infrared K-band continuum reveal a disk around each binary component, with similar half-flux radii of about 0.1 au at d$\sim$130 pc, inclinations ($i=$28$\pm$3$^o$\ and $i=$22$\pm$6$^o$), and position angles (PA=0$^o\pm$6$^o$ and PA=-2$^o\pm$12$^o$), suggesting that they formed from the fragmentation of a common disk. The S CrA N spectrum shows bright HeI and Br$γ$ line emission exhibiting inverse P-Cygni profiles, typically associated with infalling gas. The continuum-compensated Br$γ$ line visibilities of S CrA N show the presence of a compact Br$γ$ emitting region the radius of which is about $\sim$0.06 au, which is twice as big as the truncation radius. This component is mostly tracing a wind. Moreover, a slight radius change between the blue- and red-shifted Br$γ$ line components is marginally detected. The presence of an inverse P-Cygni profile in the HeI and Br$γ$ lines, along with the tentative detection of a slightly larger size of the blue-shifted Br$γ$ line component, hint at the simultaneous presence of a wind and magnetospheric accretion in S CrA N.
△ Less
Submitted 5 September, 2017;
originally announced September 2017.
-
Accretion-ejection morphology of the microquasar SS433 resolved at sub-au scale
Authors:
GRAVITY Collaboration,
P. -O. Petrucci,
I. Waisberg,
J. -B. Le Bouquin,
J. Dexter,
G. Dubus,
K. Perraut,
P. Kervella,
R. Abuter,
A. Amorim,
N. Anugu,
J. P. Berger,
N. Blind,
H. Bonnet,
W. Brandner,
A. Buron,
É. Choquet,
Y. Clénet,
W. de Wit,
C. Deen,
A. Eckart,
F. Eisenhauer,
G. Finger,
P. Garcia,
R. Garcia Lopez
, et al. (45 additional authors not shown)
Abstract:
We present the first optical observation at sub-milliarcsecond (mas) scale of the microquasar SS 433 obtained with the GRAVITY instrument on the VLT interferometer. The 3.5 hour exposure reveals a rich K-band spectrum dominated by hydrogen Br$γ $ and \ion{He}{i} lines, as well as (red-shifted) emission lines coming from the jets. The K-band continuum emitting region is dominated by a marginally re…
▽ More
We present the first optical observation at sub-milliarcsecond (mas) scale of the microquasar SS 433 obtained with the GRAVITY instrument on the VLT interferometer. The 3.5 hour exposure reveals a rich K-band spectrum dominated by hydrogen Br$γ $ and \ion{He}{i} lines, as well as (red-shifted) emission lines coming from the jets. The K-band continuum emitting region is dominated by a marginally resolved point source ($<$ 1 mas) embedded inside a diffuse background accounting for 10\% of the total flux. The jet line positions agree well with the ones expected from the jet kinematic model, an interpretation also supported by the consistent sign (i.e. negative/positive for the receding/approaching jet component) of the phase shifts observed in the lines. The significant visibility drop across the jet lines, together with the small and nearly identical phases for all baselines, point toward a jet that is offset by less than 0.5 mas from the continuum source and resolved in the direction of propagation, with a typical size of 2 mas. The jet position angle of $\sim$80$^{\circ}$ is consistent with the expected one at the observation date. Jet emission so close to the central binary system would suggest that line locking, if relevant to explain the amplitude and stability of the 0.26c jet velocity, operates on elements heavier than hydrogen. The Br$γ $ profile is broad and double peaked. It is better resolved than the continuum and the change of the phase signal sign across the line on all baselines suggests an East-West oriented geometry alike the jet direction and supporting a (polar) disk wind origin.
△ Less
Submitted 5 May, 2017;
originally announced May 2017.
-
Sub-milliarcsecond Optical Interferometry of the HMXB BP Cru with VLTI/GRAVITY
Authors:
GRAVITY Collaboration,
I. Waisberg,
J. Dexter,
O. Pfuhl,
R. Abuter,
A. Amorin,
N. Anugu,
J. P. Berger,
N. Blind,
H. Bonnet,
W. Brandner,
A. Buron,
Y. Clénet,
W. de Wit,
C. Deen,
F. Delplancke-Ströbele,
R. Dembet,
G. Duvert,
A. Eckart,
F. Eisenhauer,
P. Fédou,
G. Finger,
P. Garcia,
R. Garcia Lopez,
E. Gendron
, et al. (46 additional authors not shown)
Abstract:
We observe the HMXB BP Cru using interferometry in the near-infrared K band with VLTI/GRAVITY. Continuum visibilities are at most partially resolved, consistent with the predicted size of the hypergiant. Differential visibility amplitude ($Δ|V| \sim 5\%$) and phase ($Δφ\sim 2 °$) signatures are observed across the HeI $2.059 μ$m and Br$γ$ lines, the latter seen strongly in emission, unusual for th…
▽ More
We observe the HMXB BP Cru using interferometry in the near-infrared K band with VLTI/GRAVITY. Continuum visibilities are at most partially resolved, consistent with the predicted size of the hypergiant. Differential visibility amplitude ($Δ|V| \sim 5\%$) and phase ($Δφ\sim 2 °$) signatures are observed across the HeI $2.059 μ$m and Br$γ$ lines, the latter seen strongly in emission, unusual for the donor star's spectral type. For a baseline $B \sim 100$m, the differential phase RMS $\sim 0.2 °$ corresponds to an astrometric precision of $\sim 2 μ$as. A model-independent analysis in the marginally resolved limit of interferometry reveals asymmetric and extended emission with a strong wavelength dependence. We propose geometric models based on an extended and distorted wind and/or a high density gas stream, which has long been predicted to be present in this system. The observations show that optical interferometry is now able to resolve HMXBs at the spatial scale at which accretion takes place, and therefore probe the effects of the gravitational and radiation fields of the compact object on its environment.
△ Less
Submitted 5 May, 2017;
originally announced May 2017.
-
First Light for GRAVITY: Phase Referencing Optical Interferometry for the Very Large Telescope Interferometer
Authors:
GRAVITY Collaboration,
R. Abuter,
M. Accardo,
A. Amorim,
N. Anugu,
G. Ávila,
N. Azouaoui,
M. Benisty,
J. P. Berger,
N. Blind,
H. Bonnet,
P. Bourget,
W. Brandner,
R. Brast,
A. Buron,
L. Burtscher,
F. Cassaing,
F. Chapron,
É. Choquet,
Y. Clénet,
C. Collin,
V. Coudé du Foresto,
W. de Wit,
P. T. de Zeeuw,
C. Deen
, et al. (108 additional authors not shown)
Abstract:
GRAVITY is a new instrument to coherently combine the light of the European Southern Observatory Very Large Telescope Interferometer to form a telescope with an equivalent 130 m diameter angular resolution and a collecting area of 200 m$^2$. The instrument comprises fiber fed integrated optics beam combination, high resolution spectroscopy, built-in beam analysis and control, near-infrared wavefro…
▽ More
GRAVITY is a new instrument to coherently combine the light of the European Southern Observatory Very Large Telescope Interferometer to form a telescope with an equivalent 130 m diameter angular resolution and a collecting area of 200 m$^2$. The instrument comprises fiber fed integrated optics beam combination, high resolution spectroscopy, built-in beam analysis and control, near-infrared wavefront sensing, phase-tracking, dual beam operation and laser metrology [...]. This article gives an overview of GRAVITY and reports on the performance and the first astronomical observations during commissioning in 2015/16. We demonstrate phase tracking on stars as faint as m$_K$ ~ 10 mag, phase-referenced interferometry of objects fainter than m$_K$ ~ 15 mag with a limiting magnitude of m$_K$ ~ 17 mag, minute long coherent integrations, a visibility accuracy of better than 0.25 %, and spectro-differential phase and closure phase accuracy better than 0.5°, corresponding to a differential astrometric precision of better than 10 microarcseconds (μas). The dual-beam astrometry, measuring the phase difference of two objects with laser metrology, is still under commissioning. First observations show residuals as low as 50 μas when following objects over several months. We illustrate the instrument performance with the observations of archetypical objects for the different instrument modes. Examples include the Galactic Center supermassive black hole and its fast orbiting star S2 for phase referenced dual beam observations and infrared wavefront sensing, the High Mass X-Ray Binary BP Cru and the Active Galactic Nucleus of PDS 456 for few μas spectro-differential astrometry, the T Tauri star S CrA for a spectro-differential visibility analysis, ξ Tel and 24 Cap for high accuracy visibility observations, and η Car for interferometric imaging with GRAVITY.
△ Less
Submitted 5 May, 2017;
originally announced May 2017.
-
Rotating starburst cores in massive galaxies at z=2.5
Authors:
Ken-ichi Tadaki,
Tadayuki Kodama,
Erica J. Nelson,
Sirio Belli,
Natascha M. Förster Schreiber,
Reinhard Genzel,
Masao Hayashi,
Rodrigo Herrera-Camus,
Yusei Koyama,
Philipp Lang,
Dieter Lutz,
Rhythm Shimakawa,
Linda J. Tacconi,
Hannah Übler,
Emily Wisnioski,
Stijn Wuyts,
Bunyo Hatsukade,
Magdalena Lippa,
Kouichiro Nakanishi,
Soh Ikarashi,
Kotaro Kohno,
Tomoko L. Suzuki,
Yoichi Tamura,
Ichi Tanaka
Abstract:
We present spatially resolved ALMA observations of the CO J=3-2 emission line in two massive galaxies at z=2.5 on the star-forming main sequence. Both galaxies have compact dusty star-forming cores with effective radii of Re=1.3 kpc and Re=1.2 kpc in the 870 um continuum emission. The spatial extent of star-forming molecular gas is also compact with Re=1.9 kpc and Re=2.3 kpc, but more extended tha…
▽ More
We present spatially resolved ALMA observations of the CO J=3-2 emission line in two massive galaxies at z=2.5 on the star-forming main sequence. Both galaxies have compact dusty star-forming cores with effective radii of Re=1.3 kpc and Re=1.2 kpc in the 870 um continuum emission. The spatial extent of star-forming molecular gas is also compact with Re=1.9 kpc and Re=2.3 kpc, but more extended than the dust emission. Interpreting the observed position-velocity diagrams with dynamical models, we find the starburst cores to be rotation-dominated with the ratio of the maximum rotation velocity to the local velocity dispersion of v/sigma=7.0 (v=386 km/s) and v/sigma_0=4.1 (v=391 km/s). Given that the descendants of these massive galaxies in the local universe are likely ellipticals with v/sigma nearly an order of magnitude lower, the rapidly rotating galaxies would lose significant net angular momentum in the intervening time. The comparisons among dynamical, stellar, gas, and dust mass suggest that the starburst CO-to-H2 conversion factor of alpha_CO=0.8 Msun/(K km/s/pc2) is appropriate in the spatially resolved cores. The dense cores are likely to be formed in extreme environments similar to the central regions of local ultraluminous infrared galaxies. Our work also demonstrates that a combination of medium-resolution CO and high-resolution dust continuum observations is a powerful tool for characterizing the dynamical state of molecular gas in distant galaxies.
△ Less
Submitted 14 May, 2017; v1 submitted 29 March, 2017;
originally announced March 2017.
-
PHIBSS: Unified Scaling Relations of Gas Depletion Time and Molecular Gas Fractions
Authors:
L. J. Tacconi,
R. Genzel,
A. Saintonge,
F. Combes,
S. García-Burillo,
R. Neri,
A. Bolatto,
T. Contini,
N. M. Förster Schreiber,
S. Lilly,
D. Lutz,
S. Wuyts,
G. Accurso,
J. Boissier,
F. Boone,
N. Bouché,
F. Bournaud,
A. Burkert,
M. Carollo,
M. Cooper,
P. Cox,
C. Feruglio,
J. Freundlich,
R. Herrera-Camus,
S. Juneau
, et al. (10 additional authors not shown)
Abstract:
This paper provides an update of our previous scaling relations (Genzel et al.2015) between galaxy integrated molecular gas masses, stellar masses and star formation rates, in the framework of the star formation main-sequence (MS), with the main goal to test for possible systematic effects. For this purpose our new study combines three independent methods of determining molecular gas masses from C…
▽ More
This paper provides an update of our previous scaling relations (Genzel et al.2015) between galaxy integrated molecular gas masses, stellar masses and star formation rates, in the framework of the star formation main-sequence (MS), with the main goal to test for possible systematic effects. For this purpose our new study combines three independent methods of determining molecular gas masses from CO line fluxes, far-infrared dust spectral energy distributions, and ~1mm dust photometry, in a large sample of 1444 star forming galaxies (SFGs) between z=0 and 4. The sample covers the stellar mass range log(M*/M_solar)=9.0-11.8, and star formation rates relative to that on the MS, delta_MS=SFR/SFR(MS), from 10^{-1.3} to 10^{2.2}. Our most important finding is that all data sets, despite the different techniques and analysis methods used, follow the same scaling trends, once method-to-method zero point offsets are minimized and uncertainties are properly taken into account. The molecular gas depletion time t_depl, defined as the ratio of molecular gas mass to star formation rate, scales as (1+z)^{-0.6}x(delta_MS)^{-0.44}, and is only weakly dependent on stellar mass. The ratio of molecular-to-stellar mass mu_gas depends on (1+z)^{2.5}x (delta_MS)^{0.52}x(M*)^{-0.36}, which tracks the evolution of the specific star formation rate. The redshift dependence of mu_gas requires a curvature term, as may the mass-dependences of t_depl and mu_gas. We find no or only weak correlations of t_depl and mu_gas with optical size R or surface density once one removes the above scalings, but we caution that optical sizes may not be appropriate for the high gas and dust columns at high-z.
△ Less
Submitted 11 January, 2018; v1 submitted 3 February, 2017;
originally announced February 2017.
-
The metrology system of the VLTI instrument GRAVITY
Authors:
Magdalena Lippa,
Stefan Gillessen,
Nicolas Blind,
Yipting Kok,
Senol Yazici,
Johannes Weber,
Oliver Pfuhl,
Marcus Haug,
Stefan Kellner,
Ekkehard Wieprecht,
Frank Eisenhauer,
Reinhard Genzel,
Oliver Hans,
Frank Haussmann,
David Huber,
Tobias Kratschmann,
Thomas Ott,
Markus Plattner,
Christian Rau,
Eckhard Sturm,
Idel Waisberg,
Erich Wiezorrek,
Guy Perrin,
Karine Perraut,
Wolfgang Brandner
, et al. (2 additional authors not shown)
Abstract:
The VLTI instrument GRAVITY combines the beams from four telescopes and provides phase-referenced imaging as well as precision-astrometry of order 10 microarcseconds by observing two celestial objects in dual-field mode. Their angular separation can be determined from their differential OPD (dOPD) when the internal dOPDs in the interferometer are known. Here, we present the general overview of the…
▽ More
The VLTI instrument GRAVITY combines the beams from four telescopes and provides phase-referenced imaging as well as precision-astrometry of order 10 microarcseconds by observing two celestial objects in dual-field mode. Their angular separation can be determined from their differential OPD (dOPD) when the internal dOPDs in the interferometer are known. Here, we present the general overview of the novel metrology system which performs these measurements. The metrology consists of a three-beam laser system and a homodyne detection scheme for three-beam interference using phase-shifting interferometry in combination with lock-in amplifiers. Via this approach the metrology system measures dOPDs on a nanometer-level.
△ Less
Submitted 17 August, 2016;
originally announced August 2016.
-
GRAVITY: the VLTI 4-beam combiner for narrow-angle astrometry and interferometric imaging
Authors:
N. Blind,
F. Eisenhauer,
S. Gillessen,
Y. Kok,
M. Lippa,
G. Perrin,
R. Dembet,
P. Fedou,
S. Lacour,
K. Perraut,
L. Jocou,
L. Burtscher,
O. Hans,
M. Haug,
F. Haussmann,
S. Huber,
A. Janssen,
S. Kellner,
T. Ott,
O. Pfuhl,
E. Sturm,
J. Weber,
E. Wieprecht,
A. Amorim,
W. Brandner
, et al. (1 additional authors not shown)
Abstract:
GRAVITY is the second generation Very Large Telescope Interferometer instrument for precision narrow-angle astrometry and interferometric imaging in the Near Infra-Red (NIR). It shall provide precision astrometry of order 10 microarcseconds, and imaging capability at a few milliarcsecond resolution, and hence will revolutionise dynamical measurements of celestial objects. GRAVITY is currently in t…
▽ More
GRAVITY is the second generation Very Large Telescope Interferometer instrument for precision narrow-angle astrometry and interferometric imaging in the Near Infra-Red (NIR). It shall provide precision astrometry of order 10 microarcseconds, and imaging capability at a few milliarcsecond resolution, and hence will revolutionise dynamical measurements of celestial objects. GRAVITY is currently in the last stages of its integration and tests in Garching at MPE, and will be delivered to the VLT Interferometer (VLTI) in 2015. We present here the instrument, with a particular focus on the components making use of fibres: integrated optics beam combiners, polarisation rotators, fibre differential delay lines, and the metrology.
△ Less
Submitted 25 March, 2015;
originally announced March 2015.
-
The GRAVITY instrument software / High-level software
Authors:
Leonard Burtscher,
Ekkehard Wieprecht,
Thomas Ott,
Yit** Kok,
Senol Yazici,
Narsireddy Anugu,
Roderick Dembet,
Pierre Fedou,
Sylvestre Lacour,
Juergen Ott,
Thibaut Paumard,
Vincent Lapeyrere,
Pierre Kervella,
Roberto Abuter,
Eszter Pozna,
Frank Eisenhauer,
Nicolas Blind,
Reinhard Genzel,
Stefan Gillessen,
Oliver Hans,
Marcus Haug,
Frank Haussmann,
Stefan Kellner,
Magdalena Lippa,
Oliver Pfuhl
, et al. (8 additional authors not shown)
Abstract:
GRAVITY is the four-beam, near- infrared, AO-assisted, fringe tracking, astrometric and imaging instrument for the Very Large Telescope Interferometer (VLTI). It is requiring the development of one of the most complex instrument software systems ever built for an ESO instrument. Apart from its many interfaces and interdependencies, one of the most challenging aspects is the overall performance and…
▽ More
GRAVITY is the four-beam, near- infrared, AO-assisted, fringe tracking, astrometric and imaging instrument for the Very Large Telescope Interferometer (VLTI). It is requiring the development of one of the most complex instrument software systems ever built for an ESO instrument. Apart from its many interfaces and interdependencies, one of the most challenging aspects is the overall performance and stability of this complex system. The three infrared detectors and the fast reflective memory network (RMN) recorder contribute a total data rate of up to 20 MiB/s accumulating to a maximum of 250 GiB of data per night. The detectors, the two instrument Local Control Units (LCUs) as well as the five LCUs running applications under TAC (Tools for Advanced Control) architecture, are interconnected with fast Ethernet, RMN fibers and dedicated fiber connections as well as signals for the time synchronization. Here we give a simplified overview of all subsystems of GRAVITY and their interfaces and discuss two examples of high-level applications during observations: the acquisition procedure and the gathering and merging of data to the final FITS file.
△ Less
Submitted 23 January, 2015;
originally announced January 2015.
-
The GRAVITY metrology system: narrow-angle astrometry via phase-shifting interferometry
Authors:
M. Lippa,
N. Blind,
S. Gillessen,
Y. Kok,
J. Weber,
F. Eisenhauer,
O. Pfuhl,
A. Janssen,
M. Haug,
F. Haußmann,
S. Kellner,
O. Hans,
E. Wieprecht,
T. Ott,
L. Burtscher,
R. Genzel,
E. Sturm,
R. Hofmann,
S. Huber,
D. Huber,
S. Senftleben,
A. Pflüger,
R. Greßmann,
G. Perrin,
K. Perraut
, et al. (4 additional authors not shown)
Abstract:
The VLTI instrument GRAVITY will provide very powerful astrometry by combining the light from four telescopes for two objects simultaneously. It will measure the angular separation between the two astronomical objects to a precision of 10 microarcseconds. This corresponds to a differential optical path difference (dOPD) between the targets of few nanometers and the paths within the interferometer…
▽ More
The VLTI instrument GRAVITY will provide very powerful astrometry by combining the light from four telescopes for two objects simultaneously. It will measure the angular separation between the two astronomical objects to a precision of 10 microarcseconds. This corresponds to a differential optical path difference (dOPD) between the targets of few nanometers and the paths within the interferometer have to be maintained stable to that level. For this purpose, the novel metrology system of GRAVITY will monitor the internal dOPDs by means of phase-shifting interferometry. We present the four-step phase-shifting concept of the metrology with emphasis on the method used for calibrating the phase shifts. The latter is based on a phase-step insensitive algorithm which unambiguously extracts phases in contrast to other methods that are strongly limited by non-linearities of the phase-shifting device. The main constraint of this algorithm is to introduce a robust ellipse fitting routine. Via this approach we are able to measure phase shifts in the laboratory with a typical accuracy of lambda/2000 or 1 nanometer of the metrology wavelength.
△ Less
Submitted 20 January, 2015;
originally announced January 2015.
-
The fiber coupler and beam stabilization system of the GRAVITY interferometer
Authors:
O. Pfuhl,
M. Haug,
F. Eisenhauer,
S. Kellner,
F. Haussmann,
G. Perrin,
S. Gillessen,
C. Straubmeier,
T. Ott,
K. Rousselet-Perraut,
A. Amorim,
M. Lippa,
A. Janssen,
W. Brandner,
Y. Kok,
N. Blind,
L. Burtscher,
E. Sturm,
E. Wieprecht,
M. Schoeller,
J. Weber,
O. Hans,
S. Huber
Abstract:
We present the installed and fully operational beam stabilization and fiber injection subsystem feeding the 2nd generation VLTI instrument GRAVITY. The interferometer GRAVITY requires an unprecedented stability of the VLTI optical train to achieve micro-arcsecond astrometry. For this purpose, GRAVITY contains four fiber coupler units, one per telescope. Each unit is equipped with actuators to stab…
▽ More
We present the installed and fully operational beam stabilization and fiber injection subsystem feeding the 2nd generation VLTI instrument GRAVITY. The interferometer GRAVITY requires an unprecedented stability of the VLTI optical train to achieve micro-arcsecond astrometry. For this purpose, GRAVITY contains four fiber coupler units, one per telescope. Each unit is equipped with actuators to stabilize the telescope beam in terms of tilt and lateral pupil displacement, to rotate the field, to adjust the polarization and to compensate atmospheric piston. A special roof-prism offers the possibility of on-axis as well as off-axis fringe tracking without changing the optical train. We describe the assembly, integration and alignment and the resulting optical quality and performance of the individual units. Finally, we present the closed-loop performance of the tip-tilt and pupil tracking achieved with the final systems in the lab.
△ Less
Submitted 4 December, 2014;
originally announced December 2014.
-
Combined CO & Dust Scaling Relations of Depletion Time and Molecular Gas Fractions with Cosmic Time, Specific Star Formation Rate and Stellar Mass
Authors:
R. Genzel,
L. J. Tacconi,
D. Lutz,
A. Saintonge,
S. Berta,
B. Magnelli,
F. Combes,
S. García-Burillo,
R. Neri,
A. Bolatto,
T. Contini,
S. Lilly,
J. Boissier,
F. Boone,
N. Bouché,
F. Bournaud,
A. Burkert,
M. Carollo,
L. Colina,
M. C. Cooper,
P. Cox,
C. Feruglio,
N. M. Förster Schreiber,
J. Freundlich,
J. Gracia-Carpio
, et al. (11 additional authors not shown)
Abstract:
We combine molecular gas masses inferred from CO emission in 500 star forming galaxies (SFGs) between z=0 and 3, from the IRAM-COLDGASS, PHIBSS1/2 and other surveys, with gas masses derived from Herschel far-IR dust measurements in 512 galaxy stacks over the same stellar mass/redshift range. We constrain the scaling relations of molecular gas depletion time scale (tdepl) and gas to stellar mass ra…
▽ More
We combine molecular gas masses inferred from CO emission in 500 star forming galaxies (SFGs) between z=0 and 3, from the IRAM-COLDGASS, PHIBSS1/2 and other surveys, with gas masses derived from Herschel far-IR dust measurements in 512 galaxy stacks over the same stellar mass/redshift range. We constrain the scaling relations of molecular gas depletion time scale (tdepl) and gas to stellar mass ratio (Mmolgas/M*) of SFGs near the star formation main-sequence with redshift, specific star formation rate (sSFR) and stellar mass (M*). The CO- and dust-based scaling relations agree remarkably well. This suggests that the CO-H2 mass conversion factor varies little within 0.6dex of the main sequence (sSFR(ms,z,M*)), and less than 0.3dex throughout this redshift range. This study builds on and strengthens the results of earlier work. We find that tdepl scales as (1+z)^-0.3 *(sSFR/sSFR(ms,z,M*))^-0.5, with little dependence on M*. The resulting steep redshift dependence of Mmolgas/M* ~(1+z)^3 mirrors that of the sSFR and probably reflects the gas supply rate. The decreasing gas fractions at high M* are driven by the flattening of the SFR-M* relation. Throughout the redshift range probed a larger sSFR at constant M* is due to a combination of an increasing gas fraction and a decreasing depletion time scale. As a result galaxy integrated samples of the Mmolgas-SFR rate relation exhibit a super-linear slope, which increases with the range of sSFR. With these new relations it is now possible to determine Mmolgas with an accuracy of 0.1dex in relative terms, and 0.2dex including systematic uncertainties.
△ Less
Submitted 5 December, 2014; v1 submitted 3 September, 2014;
originally announced September 2014.
-
The GRAVITY metrology system: modeling a metrology in optical fibers
Authors:
N. Blind,
H. Huber,
F. Eisenhauer,
J. Weber,
S. Gillessen,
M. Lippa,
L. Burtscher,
O. Hans,
M. Haug,
F. Haussmann,
S. Huber,
A. Janssen,
S. Kellner,
Y. Kok,
T. Ott,
O. Pfuhl,
E. Sturm,
E. Wieprecht,
A. Amorim,
W. Brandner,
G. Perrin,
K. Perraut,
C. Straubmeier
Abstract:
GRAVITY is the second generation VLT Interferometer (VLTI) instrument for high-precision narrow-angle astrometry and phase-referenced interferometric imaging. The laser metrology system of GRAVITY is at the heart of its astrometric mode, which must measure the distance of 2 stars with a precision of 10 micro-arcseconds. This means the metrology has to measure the optical path difference between th…
▽ More
GRAVITY is the second generation VLT Interferometer (VLTI) instrument for high-precision narrow-angle astrometry and phase-referenced interferometric imaging. The laser metrology system of GRAVITY is at the heart of its astrometric mode, which must measure the distance of 2 stars with a precision of 10 micro-arcseconds. This means the metrology has to measure the optical path difference between the two beam combiners of GRAVITY to a level of 5 nm. The metrology design presents some non-common paths that have consequently to be stable at a level of 1 nm. Otherwise they would impact the performance of GRAVITY. The various tests we made in the past on the prototype give us hints on the components responsible for this error, and on their respective contribution to the total error. It is however difficult to assess their exact origin from only OPD measurements, and therefore, to propose a solution to this problem. In this paper, we present the results of a semi-empirical modeling of the fibered metrology system, relying on theoretical basis, as well as on characterisations of key components. The modeling of the metrology system regarding various effects, e.g., temperature, waveguide heating or mechanical stress, will help us to understand how the metrology behave. The goals of this modeling are to 1) model the test set-ups and reproduce the measurements (as a validation of the modeling), 2) determine the origin of the non-common path errors, and 3) propose modifications to the current metrology design to reach the required 1nm stability.
△ Less
Submitted 24 July, 2014;
originally announced July 2014.
-
GRAVITY: the Calibration Unit
Authors:
N. Blind,
F. Eisenhauer,
M. Haug,
S. Gillessen,
M. Lippa,
L. Burtscher,
O. Hans,
F. Haussmann,
S. Huber,
A. Janssen,
S. Kellner,
Y. Kok,
T. Ott,
O. Pfuhl,
E. Sturm,
J. Weber,
E. Wieprecht,
A. Amorim,
W. Brandner,
G. Perrin,
K. Perraut,
C. Straubmeier
Abstract:
We present in this paper the design and characterisation of a new sub-system of the VLTI 2nd generation instrument GRAVITY: the Calibration Unit. The Calibration Unit provides all functions to test and calibrate the beam combiner instrument: it creates two artificial stars on four beams, and dispose of four delay lines with an internal metrology. It also includes artificial stars for the tip-tilt…
▽ More
We present in this paper the design and characterisation of a new sub-system of the VLTI 2nd generation instrument GRAVITY: the Calibration Unit. The Calibration Unit provides all functions to test and calibrate the beam combiner instrument: it creates two artificial stars on four beams, and dispose of four delay lines with an internal metrology. It also includes artificial stars for the tip-tilt and pupil guiding systems, as well as four metrology pick-up diodes, for tests and calibration of the corresponding sub-systems. The calibration unit also hosts the reference targets to align GRAVITY to the VLTI, and the safety shutters to avoid the metrology light to propagate in the VLTI-lab. We present the results of the characterisation and validtion of these differrent sub-units.
△ Less
Submitted 24 July, 2014;
originally announced July 2014.
-
GRAVITY: beam stabilization and light injection subsystems
Authors:
O. Pfuhl,
M. Haug,
F. Eisenhauer,
D. Penka,
A. Amorim,
S. Kellner,
S. Gillessen,
T. Ott,
E. Wieprecht,
E. Sturm,
F. Haussmann,
M. Lippa
Abstract:
We present design results of the 2nd generation VLTI instrument GRAVITY beam stabilization and light injection subsystems. Designed to deliver micro-arcsecond astrometry, GRAVITY requires an unprecedented stability of the VLTI optical train. To meet the astrometric requirements, we have developed a dedicated 'laser guiding system', correcting the longitudinal and lateral pupil position as well as…
▽ More
We present design results of the 2nd generation VLTI instrument GRAVITY beam stabilization and light injection subsystems. Designed to deliver micro-arcsecond astrometry, GRAVITY requires an unprecedented stability of the VLTI optical train. To meet the astrometric requirements, we have developed a dedicated 'laser guiding system', correcting the longitudinal and lateral pupil position as well as the image jitter. The actuators for the correction are provided by four 'fiber coupler' units located in the GRAVITY cryostat. Each fiber coupler picks the light of one telescope and stabilizes the beam. Furthermore each unit provides field de-rotation, polarization analysis as well as atmospheric piston correction. Using a novel roof prism design offers the possibility of on-axis as well as off-axis fringe tracking without changing the optical path. Finally the stabilized beam is injected with minimized losses into single-mode fibers via parabolic mirrors. We present lab results of the first guiding- as well as the first fiber coupler prototype regarding the closed loop performance and the optical quality. Based on the lab results we discuss the on-sky performance of the system and the implications concerning the sensitivity of GRAVITY.
△ Less
Submitted 20 December, 2012;
originally announced December 2012.
-
GRAVITY: metrology
Authors:
S. Gillessen,
M. Lippa,
F. Eisenhauer,
O. Pfuhl,
M. Haug,
S. Kellner,
T. Ott,
E. Wieprecht,
E. Sturm,
F. Haussmann,
C. F. Kister,
D. Moch,
M. Thiel
Abstract:
GRAVITY is a second generation VLTI instrument, combining the light of four telescopes and two objects simultaneously. The main goal is to obtain astrometrically accurate information. Besides correctly measured stellar phases this requires the knowledge of the instrumental differential phase, which has to be measured optically during the astronomical observations. This is the purpose of a dedicate…
▽ More
GRAVITY is a second generation VLTI instrument, combining the light of four telescopes and two objects simultaneously. The main goal is to obtain astrometrically accurate information. Besides correctly measured stellar phases this requires the knowledge of the instrumental differential phase, which has to be measured optically during the astronomical observations. This is the purpose of a dedicated metrology system. The GRAVITY metrology covers the full optical path, from the beam combiners up to the reference points in the beam of the primary telescope mirror, minimizing the systematic uncertainties and providing a proper baseline in astrometric terms. Two laser beams with a fixed phase relation travel backward the whole optical chain, creating a fringe pattern in any plane close to a pupil. By temporal encoding the phase information can be extracted at any point by means of flux measurements with photo diodes. The reference points chosen sample the pupil at typical radii, eliminating potential systematics due differential focus. We present the final design and the performance estimate, which is in accordance with the overall requirements for GRAVITY.
△ Less
Submitted 12 September, 2012;
originally announced September 2012.