-
The $β$ Pictoris b Hill sphere transit campaign. Paper II: Searching for the signatures of the $β$ Pictoris exoplanets through time delay analysis of the $δ$ Scuti pulsations
Authors:
Sebastian Zieba,
Konstanze Zwintz,
Matthew Kenworthy,
Daniel Hey,
Simon J. Murphy,
Rainer Kuschnig,
Lyu Abe,
Abdelkrim Agabi,
Djamel Mekarnia,
Tristan Guillot,
François-Xavier Schmider,
Philippe Stee,
Yuri De Pra,
Marco Buttu,
Nicolas Crouzet,
Samuel Mellon,
Jeb Bailey III,
Remko Stuik,
Patrick Dorval,
Geert-Jan J. Talens,
Steven Crawford,
Eric Mamajek,
Iva Laginja,
Michael Ireland,
Blaine Lomberg
, et al. (12 additional authors not shown)
Abstract:
The $β$ Pictoris system is the closest known stellar system with directly detected gas giant planets, an edge-on circumstellar disc, and evidence of falling sublimating bodies and transiting exocomets. The inner planet, $β$ Pictoris c, has also been indirectly detected with radial velocity (RV) measurements. The star is a known $δ$ Scuti pulsator, and the long-term stability of these pulsations op…
▽ More
The $β$ Pictoris system is the closest known stellar system with directly detected gas giant planets, an edge-on circumstellar disc, and evidence of falling sublimating bodies and transiting exocomets. The inner planet, $β$ Pictoris c, has also been indirectly detected with radial velocity (RV) measurements. The star is a known $δ$ Scuti pulsator, and the long-term stability of these pulsations opens up the possibility of indirectly detecting the gas giant planets through time delays of the pulsations due to a varying light travel time. We search for phase shifts in the $δ$ Scuti pulsations consistent with the known planets $β$ Pictoris b and c and carry out an analysis of the stellar pulsations of $β$ Pictoris over a multi-year timescale. We used photometric data collected by the BRITE-Constellation, bRing, ASTEP, and TESS to derive a list of the strongest and most significant $δ$ Scuti pulsations. We carried out an analysis with the open-source python package maelstrom to study the stability of the pulsation modes of $β$ Pictoris in order to determine the long-term trends in the observed pulsations. We did not detect the expected signal for $β$ Pictoris b or $β$ Pictoris c. The expected time delay is 6 seconds for $β$ Pictoris c and 24 seconds for $β$ Pictoris b. With simulations, we determined that the photometric noise in all the combined data sets cannot reach the sensitivity needed to detect the expected timing drifts. An analysis of the pulsational modes of $β$ Pictoris using maelstrom showed that the modes themselves drift on the timescale of a year, fundamentally limiting our ability to detect exoplanets around $β$ Pictoris via pulsation timing.
△ Less
Submitted 7 June, 2024;
originally announced June 2024.
-
Integrated photonic-based coronagraphic systems for future space telescopes
Authors:
Niyati Desai,
Lorenzo König,
Emiel Por,
Roser Juanola-Parramon,
Ruslan Belikov,
Iva Laginja,
Olivier Guyon,
Laurent Pueyo,
Kevin Fogarty,
Olivier Absil,
Lisa Altinier,
Pierre Baudoz,
Alexis Bidot,
Markus Johannes Bonse,
Kimberly Bott,
Bernhard Brandl,
Alexis Carlotti,
Sarah L. Casewell,
Elodie Choquet,
Nicolas B. Cowan,
David Doelman,
J. Fowler,
Timothy D. Gebhard,
Yann Gutierrez,
Sebastiaan Y. Haffert
, et al. (16 additional authors not shown)
Abstract:
The detection and characterization of Earth-like exoplanets around Sun-like stars is a primary science motivation for the Habitable Worlds Observatory. However, the current best technology is not yet advanced enough to reach the 10^-10 contrasts at close angular separations and at the same time remain insensitive to low-order aberrations, as would be required to achieve high-contrast imaging of ex…
▽ More
The detection and characterization of Earth-like exoplanets around Sun-like stars is a primary science motivation for the Habitable Worlds Observatory. However, the current best technology is not yet advanced enough to reach the 10^-10 contrasts at close angular separations and at the same time remain insensitive to low-order aberrations, as would be required to achieve high-contrast imaging of exo-Earths. Photonic technologies could fill this gap, potentially doubling exo-Earth yield. We review current work on photonic coronagraphs and investigate the potential of hybridized designs which combine both classical coronagraph designs and photonic technologies into a single optical system. We present two possible systems. First, a hybrid solution which splits the field of view spatially such that the photonics handle light within the inner working angle and a conventional coronagraph that suppresses starlight outside it. Second, a hybrid solution where the conventional coronagraph and photonics operate in series, complementing each other and thereby loosening requirements on each subsystem. As photonic technologies continue to advance, a hybrid or fully photonic coronagraph holds great potential for future exoplanet imaging from space.
△ Less
Submitted 9 September, 2023;
originally announced September 2023.
-
Visible extreme adaptive optics on extremely large telescopes: Towards detecting oxygen in Proxima Centauri b and analogs
Authors:
J. Fowler,
Sebastiaan Y. Haffert,
Maaike A. M. van Kooten,
Rico Landman,
Alexis Bidot,
Adrien Hours,
Mamadou N'Diaye,
Olivier Absil,
Lisa Altinier,
Pierre Baudoz,
Ruslan Belikov,
Markus Johannes Bonse,
Kimberly Bott,
Bernhard Brandl,
Alexis Carlotti,
Sarah L. Casewell,
Elodie Choquet,
Nicolas B. Cowan,
Niyati Desai,
David Doelman,
Kevin Fogarty,
Timothy D. Gebhard,
Yann Gutierrez,
Olivier Guyon,
Olivier Herscovici-Schiller
, et al. (16 additional authors not shown)
Abstract:
Looking to the future of exo-Earth imaging from the ground, core technology developments are required in visible extreme adaptive optics (ExAO) to enable the observation of atmospheric features such as oxygen on rocky planets in visible light. UNDERGROUND (Ultra-fast AO techNology Determination for Exoplanet imageRs from the GROUND), a collaboration built in Feb. 2023 at the Optimal Exoplanet Imag…
▽ More
Looking to the future of exo-Earth imaging from the ground, core technology developments are required in visible extreme adaptive optics (ExAO) to enable the observation of atmospheric features such as oxygen on rocky planets in visible light. UNDERGROUND (Ultra-fast AO techNology Determination for Exoplanet imageRs from the GROUND), a collaboration built in Feb. 2023 at the Optimal Exoplanet Imagers Lorentz Workshop, aims to (1) motivate oxygen detection in Proxima Centauri b and analogs as an informative science case for high-contrast imaging and direct spectroscopy, (2) overview the state of the field with respect to visible exoplanet imagers, and (3) set the instrumental requirements to achieve this goal and identify what key technologies require further development.
△ Less
Submitted 1 September, 2023;
originally announced September 2023.
-
Chasing rainbows and ocean glints: Inner working angle constraints for the Habitable Worlds Observatory
Authors:
Sophia R. Vaughan,
Timothy D. Gebhard,
Kimberly Bott,
Sarah L. Casewell,
Nicolas B. Cowan,
David S. Doelman,
Matthew Kenworthy,
Johan Mazoyer,
Maxwell A. Millar-Blanchaer,
Victor J. H. Trees,
Daphne M. Stam,
Olivier Absil,
Lisa Altinier,
Pierre Baudoz,
Ruslan Belikov,
Alexis Bidot,
Jayne L. Birkby,
Markus J. Bonse,
Bernhard Brandl,
Alexis Carlotti,
Elodie Choquet,
Dirk van Dam,
Niyati Desai,
Kevin Fogarty,
J. Fowler
, et al. (19 additional authors not shown)
Abstract:
NASA is engaged in planning for a Habitable Worlds Observatory (HabWorlds), a coronagraphic space mission to detect rocky planets in habitable zones and establish their habitability. Surface liquid water is central to the definition of planetary habitability. Photometric and polarimetric phase curves of starlight reflected by an exoplanet can reveal ocean glint, rainbows and other phenomena caused…
▽ More
NASA is engaged in planning for a Habitable Worlds Observatory (HabWorlds), a coronagraphic space mission to detect rocky planets in habitable zones and establish their habitability. Surface liquid water is central to the definition of planetary habitability. Photometric and polarimetric phase curves of starlight reflected by an exoplanet can reveal ocean glint, rainbows and other phenomena caused by scattering by clouds or atmospheric gas. Direct imaging missions are optimised for planets near quadrature, but HabWorlds' coronagraph may obscure the phase angles where such optical features are strongest. The range of accessible phase angles for a given exoplanet will depend on the planet's orbital inclination and/or the coronagraph's inner working angle (IWA). We use a recently-created catalog relevant to HabWorlds of 164 stars to estimate the number of exo-Earths that could be searched for ocean glint, rainbows, and polarization effects due to Rayleigh scattering. We find that the polarimetric Rayleigh scattering peak is accessible in most of the exo-Earth planetary systems. The rainbow due to water clouds at phase angles of ${\sim}20-60^\circ$ would be accessible with HabWorlds for a planet with an Earth equivalent instellation in ${\sim}{46}$ systems, while the ocean glint signature at phase angles of ${\sim}130-170^\circ$ would be accessible in ${\sim}{16}$ systems, assuming an IWA${=}62$ mas ($3λ/D$). Improving the IWA${=}41$ mas ($2λ/D$) increases accessibility to rainbows and glints by factors of approximately 2 and 3, respectively. By observing these scattering features, HabWorlds could detect a surface ocean and water cycle, key indicators of habitability.
△ Less
Submitted 27 July, 2023;
originally announced July 2023.
-
Programmed but Arbitrary Control Minimization of Amplitude and phase for speckle Nulling (PACMAN)
Authors:
Iva Laginja,
Raphaël Pourcelot
Abstract:
We revive a cross-platform focal-plane wavefront sensing and control algorithm originally released in 1980 and show that it can provide significant contrast improvements over conventional control methods on coronagraphic instruments. Its simplicity makes it applicable to various coronagraph models and we demonstrate it on a classical Lyot coronagraph and a phase-apodized pupil Lyot coronagraph, bo…
▽ More
We revive a cross-platform focal-plane wavefront sensing and control algorithm originally released in 1980 and show that it can provide significant contrast improvements over conventional control methods on coronagraphic instruments. Its simplicity makes it applicable to various coronagraph models and we demonstrate it on a classical Lyot coronagraph and a phase-apodized pupil Lyot coronagraph, both in simulation and in laboratory experiments. Surprisingly, it had been forgotten for decades, but we present its unbeatable advantages considering the increase in computational power in the last 40 years. We consider it a major game changer in the planning for future, space-based high-contrast imaging missions and recommend it be intensively revisited by all readers.
△ Less
Submitted 31 March, 2023;
originally announced March 2023.
-
Low-order wavefront control using a Zernike sensor through Lyot coronagraphs for exoplanet imaging: II. Concurrent operation with stroke minimization
Authors:
R. Pourcelot,
E. H. Por,
M. N'Diaye,
H. Benard,
G. Brady,
L. Canas,
M. Carbillet,
K. Dohlen,
I. Laginja,
J. Lugten,
J. Noss,
M. D. Perrin,
P. Petrone,
L. Pueyo,
S. F. Redmond,
A. Sahoo,
A. Vigan,
S. D. Will,
R. Soummer
Abstract:
Wavefront sensing and control (WFSC) will play a key role in improving the stability of future large segmented space telescopes while relaxing the thermo-mechanical constraints on the observatory structure. Coupled with a coronagraph to reject the light of an observed bright star, WFSC enables the generation and stabilisation of a dark hole (DH) in the star image to perform planet observations. Wh…
▽ More
Wavefront sensing and control (WFSC) will play a key role in improving the stability of future large segmented space telescopes while relaxing the thermo-mechanical constraints on the observatory structure. Coupled with a coronagraph to reject the light of an observed bright star, WFSC enables the generation and stabilisation of a dark hole (DH) in the star image to perform planet observations. While WFSC traditionally relies on a single wavefront sensor (WFS) input to measure wavefront errors, the next generation of instruments will require several WFSs to address aberrations with different sets of spatial and temporal frequency contents. The multiple measurements produced in such a way will then have to be combined and converted to commands for deformable mirrors (DMs) to modify the wavefront subsequently. We asynchronously operate a loop controlling the high-order modes digging a DH and a control loop that uses the rejected light by a Lyot coronagraph with a Zernike wavefront sensor to stabilize the low-order aberrations. Using the HiCAT testbed with a segmented telescope aperture, we implement concurrent operations and quantify the expected cross-talk between the two controllers. We then present experiments that alternate high-order and low-order control loops to identify and estimate their respective contributions. We show an efficient combination of the high-order and low-order control loops, kee** a DH contrast better than 5 x 10-8 over a 30 min experiment and stability improvement by a factor of 1.5. In particular, we show a contrast gain of 1.5 at separations close to the DH inner working angle, thanks to the low-order controller contribution. Concurrently digging a DH and using the light rejected by a Lyot coronagraph to stabilize the wavefront is a promising path towards exoplanet imaging and spectroscopy with future large space observatories.
△ Less
Submitted 9 January, 2023;
originally announced January 2023.
-
APLC-Optimization: an apodized pupil Lyot coronagraph design survey toolkit
Authors:
Bryony F. Nickson,
Emiel H. Por,
Meiji M. Nguyen,
Remi Soummer,
Iva Laginja,
Ananya Sahoo,
Laurent Pueyo,
Kathryn St. Laurent,
Mamadou N'Diaye,
Neil T. Zimmerman,
James Noss,
Marshall Perrin
Abstract:
We present a publicly available software package developed for exploring apodized pupil Lyot coronagraph (APLC) solutions for various telescope architectures. In particular, the package optimizes the apodizer component of the APLC for a given focal-plane mask and Lyot stop geometry to meet a set of constraints (contrast, bandwidth etc.) on the coronagraph intensity in a given focal-plane region (i…
▽ More
We present a publicly available software package developed for exploring apodized pupil Lyot coronagraph (APLC) solutions for various telescope architectures. In particular, the package optimizes the apodizer component of the APLC for a given focal-plane mask and Lyot stop geometry to meet a set of constraints (contrast, bandwidth etc.) on the coronagraph intensity in a given focal-plane region (i.e. dark zone). The package combines a high-contrast imaging simulation package HCIPy with a third-party mathematical optimizer (Gurobi) to compute the linearly optimized binary mask that maximizes transmission. We provide examples of the application of this toolkit to several different telescope geometries, including the Gemini Planet Imager (GPI) and the High-contrast imager for Complex Aperture Telescopes (HiCAT) testbed. Finally, we summarize the results of a preliminary design survey for the case of a 6~m aperture off-axis space telescope, as recommended by the 2020 NASA Decadal Survey, exploring APLC solutions for different segment sizes. We then use the Pair-based Analytical model for Segmented Telescope Imaging from Space (PASTIS) to perform a segmented wavefront error tolerancing analysis on these solutions.
△ Less
Submitted 6 October, 2022;
originally announced October 2022.
-
Segment-level thermal sensitivity analysis for exo-Earth imaging
Authors:
Ananya Sahoo,
Iva Laginja,
Laurent Pueyo,
Remi Soummer,
Laura E. Coyle,
J. Scott Knight,
Matthew East
Abstract:
We present a segment-level wavefront stability error budget for space telescopes essential for exoplanet detection. We use a detailed finite element model to relate the temperature gradient at the location of the primary mirror to wavefront variations on each of the segment. We apply the PASTIS sensitivity model forward approach to allocate static tolerances in physical units for each segment, and…
▽ More
We present a segment-level wavefront stability error budget for space telescopes essential for exoplanet detection. We use a detailed finite element model to relate the temperature gradient at the location of the primary mirror to wavefront variations on each of the segment. We apply the PASTIS sensitivity model forward approach to allocate static tolerances in physical units for each segment, and transfer these tolerances to the temporal domain via a model of the WFS&C architecture in combination with a Zernike phase sensor and science camera. We finally estimate the close-loop variance and limiting contrast for the segments' thermo-mechanical modes.
△ Less
Submitted 14 September, 2022;
originally announced September 2022.
-
Connecting the astronomical testbed community -- the CAOTIC project: Optimized teaching methods for software version control concepts
Authors:
Iva Laginja,
Pablo Robles,
Kevin Barjot,
Lucie Leboulleux,
Rebecca Jensen-Clem,
Keira J. Brooks,
Christopher Moriarty
Abstract:
Laboratory testbeds are an integral part of conducting research and develo** technology for high-contrast imaging and extreme adaptive optics. There are a number of laboratory groups around the world that use and develop resources that are imminently required for their operations, such as software and hardware controls. The CAOTIC (Community of Adaptive OpTics and hIgh Contrast testbeds) project…
▽ More
Laboratory testbeds are an integral part of conducting research and develo** technology for high-contrast imaging and extreme adaptive optics. There are a number of laboratory groups around the world that use and develop resources that are imminently required for their operations, such as software and hardware controls. The CAOTIC (Community of Adaptive OpTics and hIgh Contrast testbeds) project is aimed to be a platform for this community to connect, share information, and exchange resources in order to conduct more efficient research in astronomical instrumentation, while also encouraging best practices and strengthening cross-team connections. In these proceedings, we present the goals of the CAOTIC project, our new website, and we focus in particular on a new approach to teaching version control to scientists, which is a cornerstone of successful collaborations in astronomical instrumentation.
△ Less
Submitted 3 August, 2022;
originally announced August 2022.
-
Low-order wavefront control using a Zernike sensor through Lyot coronagraphs for exoplanet imaging
Authors:
R. Pourcelot,
M. N'Diaye,
E. H. Por,
I. Laginja,
M. Carbillet,
H. Benard,
G. Brady,
L. Canas,
K. Dohlen,
J. Fowler,
O. Lai,
M. Maclay,
E. McChesney,
J. Noss,
M. D. Perrin,
P. Petrone,
L. Pueyo,
S. F. Redmond,
A. Sahoo,
A. Vigan,
S. D. Will,
R. Soummer
Abstract:
Combining large segmented space telescopes, coronagraphy and wavefront control methods is a promising solution to produce a dark hole (DH) region in the coronagraphic image of an observed star and study planetary companions. The thermal and mechanical evolution of such a high-contrast facility leads to wavefront drifts that degrade the DH contrast during the observing time, thus limiting the abili…
▽ More
Combining large segmented space telescopes, coronagraphy and wavefront control methods is a promising solution to produce a dark hole (DH) region in the coronagraphic image of an observed star and study planetary companions. The thermal and mechanical evolution of such a high-contrast facility leads to wavefront drifts that degrade the DH contrast during the observing time, thus limiting the ability to retrieve planetary signals. Lyot-style coronagraphs are starlight suppression systems that remove the central part of the image for an unresolved observed star, the point spread function, with an opaque focal plane mask (FPM). When implemented with a flat mirror containing an etched pinhole, the mask rejects part of the starlight through the pinhole which can be used to retrieve information about low-order aberrations. We propose an active control scheme using a Zernike wavefront sensor (ZWFS) to analyze the light rejected by the FPM, control low-order aberrations, and stabilize the DH contrast. The concept formalism is first presented before characterizing the sensor behavior in simulations and in laboratory. We then perform experimental tests to validate a wavefront control loop using a ZWFS on the HiCAT testbed. By controlling the first 11 Zernike modes, we show a decrease in wavefront error standard deviation by a factor of up to 9 between open- and closed-loop operations using the ZWFS. In the presence of wavefront perturbations, we show the ability of this control loop to stabilize a DH contrast around 7x10^-8 with a standard deviation of 7x10^-9. Active control with a ZWFS proves a promising solution in Lyot coronagraphs with an FPM-filtered beam to control and stabilize low-order wavefront aberrations and DH contrast for exoplanet imaging with future space missions.
△ Less
Submitted 13 April, 2022;
originally announced April 2022.
-
Wavefront tolerances of space-based segmented telescopes at very high contrast: Experimental validation
Authors:
Iva Laginja,
Jean-François Sauvage,
Laurent M. Mugnier,
Laurent Pueyo,
Marshall D. Perrin,
James Noss,
Scott D. Will,
Keira J. Brooks,
Emiel H. Por,
Peter Petrone,
Rémi Soummer
Abstract:
Context: The detection and characterization of Earth-like exoplanets (exoEarths) from space requires exquisite wavefront stability at contrast levels of $10^{-10}$. On segmented telescopes in particular, aberrations induced by cophasing errors lead to a light leakage through the coronagraph, deteriorating the imaging performance. These need to be limited in order to facilitate the direct imaging o…
▽ More
Context: The detection and characterization of Earth-like exoplanets (exoEarths) from space requires exquisite wavefront stability at contrast levels of $10^{-10}$. On segmented telescopes in particular, aberrations induced by cophasing errors lead to a light leakage through the coronagraph, deteriorating the imaging performance. These need to be limited in order to facilitate the direct imaging of exoEarths. Aims: We perform a laboratory validation of an analytical tolerancing model that allows us to determine wavefront error requirements in the $10^{-6} - 10^{-8}$ contrast regime, for a segmented pupil with a classical Lyot coronagraph. We intend to compare the results to simulations, and we aim to establish an error budget for the segmented mirror on the High-contrast imager for Complex Aperture Telescopes (HiCAT) testbed. Methods: We use the Pair-based Analytical model for Segmented Telescope Imaging from Space (PASTIS) to measure a contrast influence matrix of a real high contrast instrument, and use an analytical model inversion to calculate per-segment wavefront error tolerances. We validate these tolerances on the HiCAT testbed by measuring the contrast response of segmented mirror states that follow these requirements. Results: The experimentally measured optical influence matrix is successfully measured on the HiCAT testbed, and we derive individual segment tolerances from it that correctly yield the targeted contrast levels. Further, the analytical expressions that predict a contrast mean and variance from a given segment covariance matrix are confirmed experimentally.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Experimental validation of active control of low-order aberrations with a Zernike sensor through a Lyot coronagraph
Authors:
Raphaël Pourcelot,
Mamadou N'Diaye,
Emiel H. Por,
Marshall Perrin,
Rémi Soummer,
Iva Laginja,
Ananya Sahoo,
Marcel Carbillet,
Greg Brady,
Matthew Maclay,
James Noss,
Pete Petrone,
Laurent Pueyo,
Scott D. Will
Abstract:
Future large segmented space telescopes and their coronagraphic instruments are expected to provide the resolution and sensitivity to observe Earth-like planets with a 10^10 contrast ratio at less than 100 mas from their host star. Advanced coronagraphs and wavefront control methods will enable the generation of high-contrast dark holes in the image of an observed star. However, drifts in the opti…
▽ More
Future large segmented space telescopes and their coronagraphic instruments are expected to provide the resolution and sensitivity to observe Earth-like planets with a 10^10 contrast ratio at less than 100 mas from their host star. Advanced coronagraphs and wavefront control methods will enable the generation of high-contrast dark holes in the image of an observed star. However, drifts in the optical path of the system will lead to pointing errors and other critical low-order aberrations that will prevent maintenance of this contrast. To measure and correct for these errors, we explore the use of a Zernike wavefront sensor (ZWFS) in the starlight rejected and filtered by the focal plane mask of a Lyot-type coronagraph. In our previous work, the analytical phase reconstruction formalism of the ZWFS was adapted for a filtered beam. We now explore strategies to actively compensate for these drifts in a segmented pupil setup on the High-contrast imager for Complex Aperture Telescopes (HiCAT). This contribution presents laboratory results from closed-loop compensation of bench internal turbulence as well as known introduced aberrations using phase conjugation and interaction matrix approaches. We also study the contrast recovery in the image plane dark hole when using a closed loop based on the ZWFS.
△ Less
Submitted 3 September, 2021;
originally announced September 2021.
-
Dark zone maintenance results for segmented aperture wavefront error drift in a high contrast space coronagraph
Authors:
Susan F. Redmond,
Laurent Pueyo,
Leonid Pogorelyuk,
Emiel Por,
James Noss,
Keira Brooks,
Iva Laginja,
Scott D. Will,
Marshall D. Perrin,
Remi Soummer,
N. Jeremy Kasdin
Abstract:
Due to the limited number of photons, directly imaging planets requires long integration times with a coronagraphic instrument. The wavefront must be stable on the same time scale, which is often difficult in space due to thermal variations and other mechanical instabilities. In this paper, we discuss the implications on future space mission observing conditions of our recent laboratory demonstrat…
▽ More
Due to the limited number of photons, directly imaging planets requires long integration times with a coronagraphic instrument. The wavefront must be stable on the same time scale, which is often difficult in space due to thermal variations and other mechanical instabilities. In this paper, we discuss the implications on future space mission observing conditions of our recent laboratory demonstration of a dark zone maintenance (DZM) algorithm. The experiments are performed on the High-contrast imager for Complex Aperture Telescopes (HiCAT) at the Space Telescope Science Institute (STScI). The testbed contains a segmented aperture, a pair of continuous deformable mirrors (DMs), and a lyot coronagraph. The segmented aperture injects high order wavefront aberration drifts into the system which are then corrected by the DMs downstream via the DZM algorithm. We investigate various drift modes including segmented aperture drift, all three DMs drift simultaneously, and drift correction at multiple wavelengths.
△ Less
Submitted 18 August, 2021;
originally announced August 2021.
-
Implementation of a broadband focal plane estimator for high-contrast dark zones
Authors:
Susan F. Redmond,
Laurent Pueyo,
Leonid Pogorelyuk,
James Noss,
Scott D. Will,
Iva Laginja,
N. Jeremy Kasdin,
Marshall D. Perrin,
Remi Soummer
Abstract:
The characterization of exoplanet atmospheres using direct imaging spectroscopy requires high-contrast over a wide wavelength range. We study a recently proposed focal plane wavefront estimation algorithm that exclusively uses broadband images to estimate the electric field. This approach therefore reduces the complexity and observational overheads compared to traditional single wavelength approac…
▽ More
The characterization of exoplanet atmospheres using direct imaging spectroscopy requires high-contrast over a wide wavelength range. We study a recently proposed focal plane wavefront estimation algorithm that exclusively uses broadband images to estimate the electric field. This approach therefore reduces the complexity and observational overheads compared to traditional single wavelength approaches. The electric field is estimated as an incoherent sum of monochromatic intensities with the pair-wise probing technique. This paper covers the detailed implementation of the algorithm and an application to the High-contrast Imager for Complex Aperture Telescopes (HiCAT) testbed with the goal to compare the performance between the broadband and traditional narrowband filter approaches.
△ Less
Submitted 18 August, 2021;
originally announced August 2021.
-
Analytical tolerancing of segmented telescope co-phasing for exo-Earth high-contrast imaging
Authors:
Iva Laginja,
Remi Soummer,
Laurent M. Mugnier,
Laurent Pueyo,
Jean-Francois Sauvage,
Lucie Leboulleux,
Laura Coyle,
J. Scott Knight
Abstract:
This paper introduces an analytical method to calculate segment-level wavefront error tolerances in order to enable the detection of faint extra-solar planets using segmented telescopes in space. This study provides a full treatment of spatially uncorrelated segment phasing errors for segmented telescope coronagraphy, which has so far only been approached using ad hoc Monte-Carlo simulations. Inst…
▽ More
This paper introduces an analytical method to calculate segment-level wavefront error tolerances in order to enable the detection of faint extra-solar planets using segmented telescopes in space. This study provides a full treatment of spatially uncorrelated segment phasing errors for segmented telescope coronagraphy, which has so far only been approached using ad hoc Monte-Carlo simulations. Instead of describing the wavefront tolerance globally for all segments, our method produces spatially dependent requirements. We relate the statistical mean contrast in the coronagraph dark hole to the standard deviation of the wavefront error of each individual segment on the primary mirror. This statistical framework for segment-level tolerancing extends the Pair-based Analytical model for Segmented Telescope Imaging from Space (PASTIS), which is based uniquely on a matrix multiplication for the optical propagation. We confirm our analytical results with Monte-Carlo simulations of E2E optical propagations through a coronagraph. Comparing our results for the Apodized Pupil Lyot Coronagraph designs for the Large UltraViolet Optical InfraRed (LUVOIR) telescope to previous studies, we show general agreement but provide a relaxation of the requirements for a significant subset of segments. These requirement maps are unique to any given telescope geometry and coronagraph design. The spatially uncorrelated segment tolerances we calculate are a key element of a complete error budget that will also need to include allocations for correlated segment contributions. We discuss how the PASTIS formalism can be extended to the spatially correlated case by deriving the statistical mean contrast and its variance for a non-diagonal aberration covariance matrix. The PASTIS tolerancing framework therefore brings a new capability that is necessary for the global tolerancing of future segmented space observatories.
△ Less
Submitted 10 March, 2021;
originally announced March 2021.
-
The $β$ Pictoris b Hill sphere transit campaign. Paper I: Photometric limits to dust and rings
Authors:
M. A. Kenworthy,
S. N. Mellon,
J. I. Bailey III,
R. Stuik,
P. Dorval,
G. -J. J. Talens,
S. R. Crawford,
E. E. Mamajek,
I. Laginja,
M. Ireland,
B. Lomberg,
R. B. Kuhn,
I. Snellen,
K. Zwintz,
R. Kuschnig,
G. M. Kennedy,
L. Abe,
A. Agabi,
D. Mekarnia,
T. Guillot,
F. Schmider,
P. Stee,
Y. de Pra,
M. Buttu,
N. Crouzet
, et al. (11 additional authors not shown)
Abstract:
Photometric monitoring of Beta Pictoris in 1981 showed anomalous fluctuations of up to 4% over several days, consistent with foreground material transiting the stellar disk. The subsequent discovery of the gas giant planet Beta Pictoris b and the predicted transit of its Hill sphere to within 0.1 au projected distance of the planet provided an opportunity to search for the transit of a circumplane…
▽ More
Photometric monitoring of Beta Pictoris in 1981 showed anomalous fluctuations of up to 4% over several days, consistent with foreground material transiting the stellar disk. The subsequent discovery of the gas giant planet Beta Pictoris b and the predicted transit of its Hill sphere to within 0.1 au projected distance of the planet provided an opportunity to search for the transit of a circumplanetary disk in this $21\pm 4$ Myr-old planetary system.
Continuous broadband photometric monitoring of Beta Pictoris requires ground-based observatories at multiple longitudes to provide redundancy and to provide triggers for rapid spectroscopic followup. These observatories include the dedicated Beta Pictoris monitoring observatory bRing at Sutherland and Siding Springs, the ASTEP400 telescope at Concordia, and observations from the space observatories BRITE and Hubble Space Telescope.
We search the combined light curves for evidence of short period transient events caused by rings and for longer term photometric variability due to diffuse circumplanetary material. We find no photometric event that matches with the event seen in November 1981, and there is no systematic photometric dimming of the star as a function of the Hill sphere radius. We conclude that the 1981 event was not caused by the transit of a circumplanetary disk around Beta Pictoris b.
The upper limit on the long term variability of Beta Pictoris places an upper limit of $1.8\times 10^{22}$ g of dust within the Hill sphere. Circumplanetary material is either condensed into a non-transiting disk, is condensed into a disk with moons that has a small obliquity, or is below our detection threshold. This is the first time that a dedicated international campaign has mapped the Hill sphere transit of a gas giant extrasolar planet at 10 au.
△ Less
Submitted 10 February, 2021;
originally announced February 2021.
-
Estimating low-order aberrations through a Lyot coronagraph with a Zernike wavefront sensor for exoplanet imaging
Authors:
Raphaël Pourcelot,
Mamadou N'Diaye,
Greg Brady,
Marcel Carbillet,
Kjetil Dohlen,
Julia Fowler,
Iva Laginja,
Matthew Maclay,
James Noss,
Marshall Perrin,
Pete Petrone,
Emiel Por,
Jean-François Sauvage,
Rémi Soummer,
Arthur Vigan,
Scott Will
Abstract:
Imaging exo-Earths is an exciting but challenging task because of the 10^-10 contrast ratio between these planets and their host star at separations narrower than 100 mas. Large segmented aperture space telescopes enable the sensitivity needed to observe a large number of planets. Combined with coronagraphs with wavefront control, they present a promising avenue to generate a high-contrast region…
▽ More
Imaging exo-Earths is an exciting but challenging task because of the 10^-10 contrast ratio between these planets and their host star at separations narrower than 100 mas. Large segmented aperture space telescopes enable the sensitivity needed to observe a large number of planets. Combined with coronagraphs with wavefront control, they present a promising avenue to generate a high-contrast region in the image of an observed star.
Another key aspect is the required stability in telescope pointing, focusing, and co-phasing of the segments of the telescope primary mirror for long-exposure observations of rocky planets for several hours to a few days. These wavefront errors should be stable down to a few tens of picometers RMS, requiring a permanent active correction of these errors during the observing sequence. To calibrate these pointing errors and other critical low-order aberrations, we propose a wavefront sensing path based on Zernike phase-contrast methods to analyze the starlight that is filtered out by the coronagraph at the telescope focus. In this work we present the analytical retrieval of the incoming low order aberrations in the starlight beam that is filtered out by an Apodized Pupil Lyot Coronagraph, one of the leading coronagraph types for starlight suppression. We implement this approach numerically for the active control of these aberrations and present an application with our first experimental results on the High-contrast imager for Complex Aperture Telescopes (HiCAT) testbed, the STScI testbed for Earth-twin observations with future large space observatories, such as LUVOIR and HabEx, two NASA flagship mission concepts.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
Predicting contrast sensitivity to segmented aperture misalignment modes for the HiCAT testbed
Authors:
Iva Laginja,
Remi Soummer,
Laurent M. Mugnier,
Laurent Pueyo,
Jean-Francois Sauvage,
Lucie Leboulleux,
Laura Coyle,
J. Scott Knight,
Marshall D. Perrin,
Scott D. Will,
James Noss,
Keira J. Brooks,
Julia Fowler
Abstract:
This paper presents the setup for empirical validations of the Pair-based Analytical model for Segmented Telescope Imaging from Space (PASTIS) tolerancing model for segmented coronagraphy. We show the hardware configuration of the High-contrast imager for Complex Aperture Telescopes (HiCAT) testbed on which these experiments will be conducted at an intermediate contrast regime between $10^{-6}$ an…
▽ More
This paper presents the setup for empirical validations of the Pair-based Analytical model for Segmented Telescope Imaging from Space (PASTIS) tolerancing model for segmented coronagraphy. We show the hardware configuration of the High-contrast imager for Complex Aperture Telescopes (HiCAT) testbed on which these experiments will be conducted at an intermediate contrast regime between $10^{-6}$ and $10^{-8}$. We describe the optical performance of the testbed with a classical Lyot coronagraph and describe the recent hardware upgrade to a segmented mode, using an IrisAO segmented deformable mirror. Implementing experiments on HiCAT is made easy through its top-level control infrastructure that uses the same code base to run on the real testbed, or to invoke the optical simulator. The experiments presented in this paper are run on the HiCAT testbed emulator, which makes them ready to be performed on actual hardware. We show results of three experiments with results from the emulator, with the goal to demonstrate PASTIS on hardware next. We measure the testbed PASTIS matrix, and validate the PASTIS analytical propagation model by comparing its contrast predictions to simulator results. We perform the tolerancing analysis on the optical eigenmodes (PASTIS modes) and on independent segments, then validate these results in respective experiments. This work prepares and enables the experimental validation of the analytical segment-based tolerancing model for segmented aperture coronagraphy with the specific application to the HiCAT testbed.
△ Less
Submitted 14 December, 2020;
originally announced December 2020.
-
ExoTiC-ISM: A Python package for marginalised exoplanet transit parameters across a grid of systematic instrument models
Authors:
Iva Laginja,
Hannah R. Wakeford
Abstract:
To address the the problem of calibration of instrument systematics in transit light curves, we present the Python package ExoTiC-ISM. Transit spectroscopy can reveal many different chemical components in exoplanet atmospheres, but such results depend on well-calibrated transit light curve observations. Each transit data set will contain instrument systematics that depend on the instrument used an…
▽ More
To address the the problem of calibration of instrument systematics in transit light curves, we present the Python package ExoTiC-ISM. Transit spectroscopy can reveal many different chemical components in exoplanet atmospheres, but such results depend on well-calibrated transit light curve observations. Each transit data set will contain instrument systematics that depend on the instrument used and will need to be calibrated out with an instrument systematic model. The proposed solution in Wakeford et al. (2016) (arXiv:1601.02587 [astro-ph.EP]) is to use a marginalisation across a grid of systematic models in order to retrieve marginalised transit parameters. Doing this over observations in multiple wavelengths yields a robust transmission spectrum of an exoplanet. ExoTiC-ISM provides tools to perform this analysis, and its current capability contains a systematic grid that is applicable to the Wide Field Camera 3 (WFC3) detector on the Hubble Space Telescope (HST), particularly for the two infrared grisms G141 and G102. By modularisation of the code and implementation of more systematic grids, ExoTiC-ISM can be used for other instruments, and an implementation for select detectors on the James Webb Space Telescope (JWST) will provide robust transit spectra in the future.
△ Less
Submitted 15 July, 2020;
originally announced July 2020.
-
The Growing Importance of a Tech Savvy Astronomy and Astrophysics Workforce
Authors:
Dara Norman,
Kelle Cruz,
Vandana Desai,
Britt Lundgren,
Eric Bellm,
Frossie Economou,
Arfon Smith,
Amanda Bauer,
Brian Nord,
Chad Schafer,
Gautham Narayan,
Ting Li,
Erik Tollerud,
Brigitta Sipocz,
Heloise Stevance,
Timothy Pickering,
Manodeep Sinha,
Joseph Harrington,
Jeyhan Kartaltepe,
Dany Vohl,
Adrian Price-Whelan,
Brian Cherinka,
Chi-kwan Chan,
Benjamin Weiner,
Maryam Modjaz
, et al. (4 additional authors not shown)
Abstract:
Fundamental coding and software development skills are increasingly necessary for success in nearly every aspect of astronomical and astrophysical research as large surveys and high resolution simulations become the norm. However, professional training in these skills is inaccessible or impractical for many members of our community. Students and professionals alike have been expected to acquire th…
▽ More
Fundamental coding and software development skills are increasingly necessary for success in nearly every aspect of astronomical and astrophysical research as large surveys and high resolution simulations become the norm. However, professional training in these skills is inaccessible or impractical for many members of our community. Students and professionals alike have been expected to acquire these skills on their own, apart from formal classroom curriculum or on-the-job training. Despite the recognized importance of these skills, there is little opportunity to develop them - even for interested researchers. To ensure a workforce capable of taking advantage of the computational resources and the large volumes of data coming in the next decade, we must identify and support ways to make software development training widely accessible to community members, regardless of affiliation or career level. To develop and sustain a technology capable astronomical and astrophysical workforce, we recommend that agencies make funding and other resources available in order to encourage, support and, in some cases, require progress on necessary training, infrastructure and policies. In this white paper, we focus on recommendations for how funding agencies can lead in the promotion of activities to support the astronomy and astrophysical workforce in the 2020s.
△ Less
Submitted 17 October, 2019;
originally announced October 2019.
-
Wavefront error tolerancing for direct imaging of exo-Earths with a large segmented telescope in space
Authors:
Iva Laginja,
Lucie Leboulleux,
Laurent Pueyo,
Rémi Soummer,
Jean-François Sauvage,
Laurent Mugnier,
Laura E. Coyle,
J. Scott Knight,
Kathryn St. Laurent,
Emiel H. Por,
James Noss
Abstract:
Direct imaging of exo-Earths and search for life is one of the most exciting and challenging objectives for future space observatories. Segmented apertures in space will be required to reach the needed large diameters beyond the capabilities of current or planned launch vehicles. These apertures present additional challenges for high-contrast coronagraphy, not only in terms of static phasing but a…
▽ More
Direct imaging of exo-Earths and search for life is one of the most exciting and challenging objectives for future space observatories. Segmented apertures in space will be required to reach the needed large diameters beyond the capabilities of current or planned launch vehicles. These apertures present additional challenges for high-contrast coronagraphy, not only in terms of static phasing but also in terms of their stability. The Pair-based Analytical model for Segmented Telescope Imaging from Space (PASTIS) was developed to model the effects of segment-level optical aberrations on the final image contrast. In this paper, we extend the original PASTIS propagation model from a purely analytical to a semi-analytical method, in which we substitute the use of analytical images with numerically simulated images. The inversion of this model yields a set of orthonormal modes that can be used to determine segment-level wavefront tolerances. We present results in the case of segment-level piston error applied to the baseline coronagraph design of LUVOIR A, with minimum and maximum wavefront error constraint between 56 pm and 290 pm per segment. The analysis is readily generalizable to other segment-level aberrations modes, and can also be expanded to establish stability tolerances for these missions.
△ Less
Submitted 20 September, 2019;
originally announced September 2019.
-
Astro2020 APC White Paper: Elevating the Role of Software as a Product of the Research Enterprise
Authors:
Arfon M. Smith,
Dara Norman,
Kelle Cruz,
Vandana Desai,
Eric Bellm,
Britt Lundgren,
Frossie Economou,
Brian D. Nord,
Chad Schafer,
Gautham Narayan,
Joseph Harrington,
Erik Tollerud,
Brigitta Sipőcz,
Timothy Pickering,
Molly S. Peeples,
Bruce Berriman,
Peter Teuben,
David Rodriguez,
Andre Gradvohl,
Lior Shamir,
Alice Allen,
Joel R. Brownstein,
Adam Ginsburg,
Manodeep Sinha,
Cameron Hummels
, et al. (20 additional authors not shown)
Abstract:
Software is a critical part of modern research, and yet there are insufficient mechanisms in the scholarly ecosystem to acknowledge, cite, and measure the impact of research software. The majority of academic fields rely on a one-dimensional credit model whereby academic articles (and their associated citations) are the dominant factor in the success of a researcher's career. In the petabyte era o…
▽ More
Software is a critical part of modern research, and yet there are insufficient mechanisms in the scholarly ecosystem to acknowledge, cite, and measure the impact of research software. The majority of academic fields rely on a one-dimensional credit model whereby academic articles (and their associated citations) are the dominant factor in the success of a researcher's career. In the petabyte era of astronomical science, citing software and measuring its impact enables academia to retain and reward researchers that make significant software contributions. These highly skilled researchers must be retained to maximize the scientific return from petabyte-scale datasets. Evolving beyond the one-dimensional credit model requires overcoming several key challenges, including the current scholarly ecosystem and scientific culture issues. This white paper will present these challenges and suggest practical solutions for elevating the role of software as a product of the research enterprise.
△ Less
Submitted 14 July, 2019;
originally announced July 2019.
-
High-contrast imager for complex aperture telescopes (HiCAT): 5. first results with segmented-aperture coronagraph and wavefront control
Authors:
Remi Soummer,
Gregory R. Brady,
Keira Brooks,
Thomas Comeau,
Elodie Choquet,
Tom Dillon,
Sylvain Egron,
Rob Gontrum,
John Hagopian,
Iva Laginja,
Lucie Leboulleux,
Marshall D. Perrin,
Peter Petrone,
Laurent Pueyo,
Johan Mazoyer,
Mamadou N'Diaye,
A. J. Eldorado Riggs,
Ron Shiri,
Anand Sivaramakrishnan,
Kathryn St. Laurent,
Ana-Maria Valenzuela,
Neil T. Zimmerman
Abstract:
Segmented telescopes are a possibility to enable large-aperture space telescopes for the direct imaging and spectroscopy of habitable worlds. However, the complexity of their aperture geometry, due to the central obstruction, support structures and segment gaps, makes high-contrast imaging challenging. The High-contrast Imager for Complex Aperture Telescopes (HiCAT) testbed was designed to study a…
▽ More
Segmented telescopes are a possibility to enable large-aperture space telescopes for the direct imaging and spectroscopy of habitable worlds. However, the complexity of their aperture geometry, due to the central obstruction, support structures and segment gaps, makes high-contrast imaging challenging. The High-contrast Imager for Complex Aperture Telescopes (HiCAT) testbed was designed to study and develop solutions for such telescope pupils using wavefront control and coronagraphic starlight suppression. The testbed design has the flexibility to enable studies with increasing complexity for telescope aperture geometries: off-axis telescopes, on-axis telescopes with central obstruction and support structures - e.g. the Wide Field Infrared Survey Telescope (WFIRST) - to on-axis segmented telescopes, including various concepts for a Large UV, Optical, IR telescope (LUVOIR). In the past year, HiCAT has made significant hardware and software updates to accelerate the development of the project. In addition to completely overhauling the software that runs the testbed, we have completed several hardware upgrades, including the second and third deformable mirror, and the first custom Apodized Pupil Lyot Coronagraph (APLC) optimized for the HiCAT aperture, which is similar to one of the possible geometries considered for LUVOIR. The testbed also includes several external metrology features for rapid replacement of parts, and in particular the ability to test multiple apodizers readily, an active tip-tilt control system to compensate for local vibration and air turbulence in the enclosure. On the software and operations side, the software infrastructure enables 24/7 automated experiments that include routine calibration tasks and high-contrast experiments. We present an overview and status update of the project, on the hardware and software side, and describe results obtained with APLC WFC.
△ Less
Submitted 13 March, 2019;
originally announced March 2019.
-
Phase-Retrieval-Based Wavefront Metrology for High Contrast Coronagraphy
Authors:
Gregory R. Brady,
Christopher Moriarty,
Peter Petrone,
Iva Laginja,
Keira Brooks,
Tom Comeau,
Lucie Leboulleux,
Remi Soummer
Abstract:
We discuss the use of parametric phase-diverse phase retrieval as an in-situ high-fidelity wavefront measurement method to characterize and optimize the transmitted wavefront of a high-contrast coronagraphic instrument. We apply our method to correct the transmitted wavefront of the HiCAT (High contrast imager for Complex Aperture Telescopes) coronagraphic testbed. This correction requires a serie…
▽ More
We discuss the use of parametric phase-diverse phase retrieval as an in-situ high-fidelity wavefront measurement method to characterize and optimize the transmitted wavefront of a high-contrast coronagraphic instrument. We apply our method to correct the transmitted wavefront of the HiCAT (High contrast imager for Complex Aperture Telescopes) coronagraphic testbed. This correction requires a series of calibration steps, which we describe. The correction improves the system wavefront from 16 nm RMS to 3.0 nm RMS.
△ Less
Submitted 4 March, 2019;
originally announced March 2019.
-
James Webb Space Telescope Optical Simulation Testbed V: Wide-field phase retrieval assessment
Authors:
Iva Laginja,
Greg Brady,
Remi Soummer,
Sylvain Egron,
Christopher Moriarty,
Charles-Philippe Lajoie,
Aurelie Bonnefois,
Vincent Michau,
Elodie Choquet,
Marc Ferrari,
Lucie Leboulleux,
Olivier Levecq,
Mamadou N'Diaye,
Marshall D. Perrin,
Peter Petrone,
Laurent Pueyo,
Anand Sivaramakrishnan
Abstract:
The James Webb Space Telescope (JWST) Optical Simulation Testbed (JOST) is a hardware simulator for wavefront sensing and control designed to produce JWST-like images. A model of the JWST three mirror anas- tigmat is realized with three lenses in the form of a Cooke triplet, which provides JWST-like optical quality over a field equivalent to a NIRCam module. An Iris AO hexagonally segmented mirror…
▽ More
The James Webb Space Telescope (JWST) Optical Simulation Testbed (JOST) is a hardware simulator for wavefront sensing and control designed to produce JWST-like images. A model of the JWST three mirror anas- tigmat is realized with three lenses in the form of a Cooke triplet, which provides JWST-like optical quality over a field equivalent to a NIRCam module. An Iris AO hexagonally segmented mirror stands in for the JWST primary. This setup successfully produces images extremely similar to expected JWST in-flight point spread functions (PSFs), and NIRCam images from cryotesting, in terms of the PSF morphology and sampling relative to the diffraction limit. The segmentation of the primary mirror into subapertures introduces complexity into wavefront sensing and control (WFS&C) of large space based telescopes like JWST. JOST provides a platform for independent analysis of WFS&C scenarios for both commissioning and maintenance activities on such ob- servatories. We present an update of the current status of the testbed including both single field and wide-field alignment results. We assess the optical quality of JOST over a wide field of view to inform the future imple- mentation of different wavefront sensing algorithms including the currently implemented Linearized Algorithm for Phase Diversity (LAPD). JOST complements other work at the Makidon Laboratory at the Space Telescope Science Institute, including the High-contrast imager for Complex Aperture Telescopes (HiCAT) testbed, that investigates coronagraphy for segmented aperture telescopes. Beyond JWST we intend to use JOST for WFS&C studies for future large segmented space telescopes such as LUVOIR.
△ Less
Submitted 15 October, 2018;
originally announced October 2018.
-
bRing: An observatory dedicated to monitoring the $β$ Pictoris b Hill sphere transit
Authors:
R. Stuik,
J. I. Bailey III,
P. Dorval,
G. J. J. Talens,
I. Laginja,
S. N. Mellon,
B. B. D. Lomberg,
S. M. Crawford,
M. J. Ireland,
E. E. Mamajek,
M. A. Kenworthy
Abstract:
Aims. We describe the design and first light observations from the $β$ Pictoris b Ring ("bRing") project. The primary goal is to detect photometric variability from the young star $β$ Pictoris due to circumplanetary material surrounding the directly imaged young extrasolar gas giant planet \bpb. Methods. Over a nine month period centred on September 2017, the Hill sphere of the planet will cross i…
▽ More
Aims. We describe the design and first light observations from the $β$ Pictoris b Ring ("bRing") project. The primary goal is to detect photometric variability from the young star $β$ Pictoris due to circumplanetary material surrounding the directly imaged young extrasolar gas giant planet \bpb. Methods. Over a nine month period centred on September 2017, the Hill sphere of the planet will cross in front of the star, providing a unique opportunity to directly probe the circumplanetary environment of a directly imaged planet through photometric and spectroscopic variations. We have built and installed the first of two bRing monitoring stations (one in South Africa and the other in Australia) that will measure the flux of $β$ Pictoris, with a photometric precision of $0.5\%$ over 5 minutes. Each station uses two wide field cameras to cover the declination of the star at all elevations. Detection of photometric fluctuations will trigger spectroscopic observations with large aperture telescopes in order to determine the gas and dust composition in a system at the end of the planet-forming era. Results. The first three months of operation demonstrate that bRing can obtain better than 0.5\% photometry on $β$ Pictoris in five minutes and is sensitive to nightly trends enabling the detection of any transiting material within the Hill sphere of the exoplanet.
△ Less
Submitted 5 September, 2017;
originally announced September 2017.
