-
Formation of limb-brightened radio jets by angle-dependent energy extraction from rapidly rotating black holes
Authors:
Kouichi Hirotani,
Hsien Shang,
Ruben Krasnopolsky,
Kenichi Nishikawa
Abstract:
By general relativistic magnetohydrodynamic simulations, it is suggested that the rotational energy of a rapidly rotating black hole (BH) is preferentially extracted along the magnetic field lines threading the event horizon in the middle and lower latitudes. Applying this angle-dependent Poynting flux to the jet downstream, we demonstrate that the jets exhibit limb-brightened structures at variou…
▽ More
By general relativistic magnetohydrodynamic simulations, it is suggested that the rotational energy of a rapidly rotating black hole (BH) is preferentially extracted along the magnetic field lines threading the event horizon in the middle and lower latitudes. Applying this angle-dependent Poynting flux to the jet downstream, we demonstrate that the jets exhibit limb-brightened structures at various viewing angles, as observed from Mrk 501, M87, and Cyg A between 5 and 75 degrees, and that the limb-brightening is enhanced when the jet is collimated strongly. It is also found that the jet width perpendicular to the propagation direction shrinks at the projected distance of the altitude where the jet collimates from a conical shape (near the BH) to a parabolic one (in the jet). Comparing with the VLBI observations, we show this collimation takes place within the de-projected altitude of 100 Schwarzschild radii from the BH in the case of the M87 jet.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
A Unified Model for Bipolar Outflows from Young Stars: Kinematic and Mixing Structures in HH 30
Authors:
Tsung-Han Ai,
Chun-Fan Liu,
Hsien Shang,
Doug Johnstone,
Ruben Krasnopolsky
Abstract:
The young stellar source HH 30 is a textbook example of an ionic optical jet originating from a disk in an edge-on system shown by the HST. It has a remnant envelope in $^{12}$CO observed by ALMA. The optical jet is characterized by its narrow appearance, large line width at the base, and high temperature inferred from line diagnostics. Three featured structures can be identified, most evident in…
▽ More
The young stellar source HH 30 is a textbook example of an ionic optical jet originating from a disk in an edge-on system shown by the HST. It has a remnant envelope in $^{12}$CO observed by ALMA. The optical jet is characterized by its narrow appearance, large line width at the base, and high temperature inferred from line diagnostics. Three featured structures can be identified, most evident in the transverse position--velocity diagrams: an extremely--high-velocity (EHV) wide-angle wind component with large spectral widths in the optical, a very--low-velocity (VLV) ambient surrounding medium seen in $^{12}$CO, and a low-velocity (LV) region traced by $^{12}$CO nested both in velocity and location between the primary wind and ambient environment. A layered cavity with multiple shells forms nested morphological and kinematic structures around the optical jet. The atomic gas originating from the innermost region of the disk attains a sufficient temperature and ionization to emit brightly in forbidden lines as an optical jet. The wide-angle portion expands, forming a low-density cavity. The filamentary $^{12}$CO encompassing the wind cavity is mixed and advected inward through the action of the magnetic interplay of the wide-angle wind with the molecular ambient medium. The magnetic interplay results in the layered shells penetrating deeply into the vast cavity of tenuous atomic wind material. The HH 30 system is an ideal manifestation of the unified wind model of \citet{Shang_2020,Shang_2023}, with clearly distinguishable atomic and molecular species mixed through the atomic lightly ionized magnetized wind and the surrounding cold molecular ambient material.
△ Less
Submitted 4 February, 2024;
originally announced February 2024.
-
An Efficient Algorithm for Astrochemical Systems Using Stoichiometry Matrices
Authors:
Kazutaka Motoyama,
Ruben Krasnopolsky,
Hsien Shang,
Kento Aida,
Eisaku Sakane
Abstract:
Astrochemical simulations are a powerful tool for revealing chemical evolution in the interstellar medium. Astrochemical calculations require efficient processing of large matrices for the chemical networks. The large chemical reaction networks often present bottlenecks for computation because of time derivatives of chemical abundances. We propose an efficient algorithm using a stoichiometry matri…
▽ More
Astrochemical simulations are a powerful tool for revealing chemical evolution in the interstellar medium. Astrochemical calculations require efficient processing of large matrices for the chemical networks. The large chemical reaction networks often present bottlenecks for computation because of time derivatives of chemical abundances. We propose an efficient algorithm using a stoichiometry matrix approach in which this time-consuming part is expressed as a loop, unlike the algorithm used in previous studies. Since stoichiometry matrices are sparse in general, the performances of simulations with our algorithm depend on which sparse-matrix storage format is used. We conducted a performance comparison experiment using the common storage formats, including the coordinate (COO) format, the compressed column storage (CCS) format, the compressed row storage (CRS) format, and the Sliced ELLPACK (SELL) format. Experimental results showed that the simulations with the CRS format are the most suitable for astrochemical simulations and about three times faster than those with the algorithm used in previous studies. In addition, our algorithm significantly reduces not only the computation time but also the compilation time. We also explore the beneficial effects of parallelization and sparse-matrix reordering in these algorithms.
△ Less
Submitted 8 December, 2023;
originally announced December 2023.
-
Exploring the Formation of Resistive Pseudodisks with the GPU Code Astaroth
Authors:
Miikka S. Väisälä,
Hsien Shang,
Daniele Galli,
Susana Lizano,
Ruben Krasnopolsky
Abstract:
Pseudodisks are dense structures formed perpendicular to the direction of the magnetic field during the gravitational collapse of a molecular cloud core. Numerical simulations of the formation of pseudodisks are usually computationally expensive with conventional CPU codes. To demonstrate the proof-of-concept of a fast computing method for this numerically costly problem, we explore the GPU-powere…
▽ More
Pseudodisks are dense structures formed perpendicular to the direction of the magnetic field during the gravitational collapse of a molecular cloud core. Numerical simulations of the formation of pseudodisks are usually computationally expensive with conventional CPU codes. To demonstrate the proof-of-concept of a fast computing method for this numerically costly problem, we explore the GPU-powered MHD code Astaroth, a 6th-order finite difference method with low adjustable finite resistivity implemented with sink particles. The formation of pseudodisks is physically and numerically robust and can be achieved with a simple and clean setup for this newly adopted numerical approach for science verification. The method's potential is illustrated by evidencing the dependence on the initial magnetic field strength of specific physical features accompanying the formation of pseudodisks, e.g. the occurrence of infall shocks and the variable behavior of the mass and magnetic flux accreted on the central object. As a performance test, we measure both weak and strong scaling of our implementation to find most efficient way to use the code on a multi-GPU system. Once suitable physics and problem-specific implementations are realized, the GPU-accelerated code is an efficient option for 3-D magnetized collapse problems.
△ Less
Submitted 25 October, 2023;
originally announced October 2023.
-
A Unified Model for Bipolar Outflows from Young Stars: Apparent Magnetic Jet Acceleration
Authors:
Hsien Shang,
Ruben Krasnopolsky,
Chun-Fan Liu
Abstract:
We explore a new, efficient mechanism that can power toroidally magnetized jets up to two to three times their original terminal velocity after they enter a self-similar phase of magnetic acceleration. Underneath the elongated outflow lobe formed by a magnetized bubble, a wide-angle free wind, through the interplay with its ambient toroid, is compressed and accelerated around its axial jet. The ex…
▽ More
We explore a new, efficient mechanism that can power toroidally magnetized jets up to two to three times their original terminal velocity after they enter a self-similar phase of magnetic acceleration. Underneath the elongated outflow lobe formed by a magnetized bubble, a wide-angle free wind, through the interplay with its ambient toroid, is compressed and accelerated around its axial jet. The extremely magnetic bubble can inflate over its original size, depending on the initial Alfvén Mach number $M_A$ of the launched flow. The shape-independent slope $\partial{}v_r/\partial{}r=2/3t$ is a salient feature of the self-similarity in the acceleration phase. Peculiar kinematic signatures are observable in the position--velocity (PV) diagrams and can combine with other morphological signatures as probes for the density-collimated jets arising in toroidally dominated magnetized winds. The apparent second acceleration is powered by the decrease of the toroidal magnetic field but operates far beyond the scales of the primary magnetocentrifugal launch region and the free asymptotic terminal state. Rich implications may connect the jets arising from the youngest protostellar outflows such as HH 211 and HH 212 and similar systems with parsec-scale jets across the mass and evolutionary spectra.
△ Less
Submitted 20 January, 2023;
originally announced January 2023.
-
A Unified Model for Bipolar Outflows from Young Stars: Kinematic Signatures of Jets, Winds, and Their Magnetic Interplay with the Ambient Toroids
Authors:
Hsien Shang,
Chun-Fan Liu,
Ruben Krasnopolsky,
Liang-Yao Wang
Abstract:
Kinematic signatures of the jet, winds, multicavities, and episodic shells arising in the unified model of bipolar outflows developed in Shang et al.\ (2020), in which an outflow forms by radially directed, wide-angle toroidally magnetized winds interacting with magnetized isothermal toroids, are extracted in the form of position--velocity diagrams. Elongated outflow lobes, driven by magnetized wi…
▽ More
Kinematic signatures of the jet, winds, multicavities, and episodic shells arising in the unified model of bipolar outflows developed in Shang et al.\ (2020), in which an outflow forms by radially directed, wide-angle toroidally magnetized winds interacting with magnetized isothermal toroids, are extracted in the form of position--velocity diagrams. Elongated outflow lobes, driven by magnetized winds and their interplay with the environment, are dominated by extended bubble structures with mixing layers beyond the conventional thin-shell models. The axial cylindrically stratified density jet carries a broad profile near the base, across the projected velocity of the wide-angle wind, and narrows down along the axis with the collimated flow. The reverse shock encloses the magnetized free wind, forms an innermost cavity, and deflects the flow pattern. Shear, Kelvin--Helmholtz instabilities, and pseudopulses add fine and distinctive features between the jet--shell components, and the fluctuating jet velocities. The broad webbed velocity features connect the extremely high and the low velocities across the multicavities, mimicking nested outflowing slower-wind components. Rings and ovals in the perpendicular cuts trace multicavities at different heights, and the compressed ambient gap regions enrich the low-velocity features with protruding spikes. Our kinematic signatures capture the observed systematics of the high-, intermediate-, and low-velocity components from Class 0 to II jet--outflow systems in molecular and atomic lines. The nested shells observed in HH 212, HH 30, and DG Tau B are naturally explained. Outflows as bubbles are ubiquitous and form an inevitable integrative outcome of the interaction between wind and ambient media.
△ Less
Submitted 18 January, 2023;
originally announced January 2023.
-
Two-dimensional Particle-in-Cell simulations of axisymmetric black hole magnetospheres: angular dependence of the Blandford-Znajek flux
Authors:
Kouichi Hirotani,
Hsien Shang,
Ruben Krasnopolsky,
Ken-ichi Nishikawa
Abstract:
We examine the temporary evolution of axisymmetric magnetospheres around rapidly rotating black holes (BHs), by applying our two-dimensional particle-in-cell simulation code. Assuming a stellar-mass BH, we find that the created pairs fail to screen the electric field along the magnetic field, provided that the mass accretion rate is much small compared to the Eddington limit. Magnetic islands are…
▽ More
We examine the temporary evolution of axisymmetric magnetospheres around rapidly rotating black holes (BHs), by applying our two-dimensional particle-in-cell simulation code. Assuming a stellar-mass BH, we find that the created pairs fail to screen the electric field along the magnetic field, provided that the mass accretion rate is much small compared to the Eddington limit. Magnetic islands are created by reconnection near the equator and migrate toward the event horizon, expelling magnetic flux tubes from the BH vicinity during a large fraction of time. When the magnetic islands stick to the horizon due to redshift and virtually vanish, a strong magnetic field penetrates the horizon, enabling efficient extraction of energy from the BH. During this flaring phase, a BH gap appears around the inner light surface with a strong meridional return current toward the equator within the ergosphere. If the mass accretion rate is 0.025 percent of the Eddington limit, the BH's spin-down luminosity becomes 16-19 times greater than its analytical estimate during the flares, although its long-term average is only 6 percent of it. We demonstrate that the extracted energy flux concentrates along the magnetic field lines threading the horizon in the middle latitudes. It is implied that this meridional concentration of the Poynting flux may result in the formation of limb-brightened jets from low-accreting BH systems.
△ Less
Submitted 26 September, 2022;
originally announced September 2022.
-
Magnetic Spirals in Accretion Flows Originated from Misaligned Magnetic Field
Authors:
Weixiao Wang,
Miikka S. Väisälä,
Hsien Shang,
Ruben Krasnopolsky,
Zhi-Yun Li,
Ka Ho Lam,
Feng Yuan
Abstract:
Misalignment between rotation and magnetic field has been suggested to be one type of physical mechanisms which can easen the effects of magnetic braking during collapse of cloud cores leading to formation of protostellar disks. However, its essential factors are poorly understood. Therefore, we perform a more detailed analysis of the physics involved. We analyze existing simulation data to measur…
▽ More
Misalignment between rotation and magnetic field has been suggested to be one type of physical mechanisms which can easen the effects of magnetic braking during collapse of cloud cores leading to formation of protostellar disks. However, its essential factors are poorly understood. Therefore, we perform a more detailed analysis of the physics involved. We analyze existing simulation data to measure the system torques, mass accretion rates and Toomre Q parameters. We also examine the presence of shocks in the system. While advective torques are generally the strongest, we find that magnetic and gravitational torques can play substantial roles in how angular momentum is transferred during the disk formation process. Magnetic torques can shape the accretion flows, creating two-armed magnetized inflow spirals aligned with the magnetic field. We find evidence of an accretion shock that is aligned according to the spiral structure of the system. Inclusion of ambipolar diffusion as explored in this work has shown a slight influence in the small scale structures but not in the main morphology. We discuss potential candidate systems where some of these phenomena could be present.
△ Less
Submitted 22 January, 2022;
originally announced January 2022.
-
Interaction of large- and small-scale dynamos in isotropic turbulent flows from GPU-accelerated simulations
Authors:
Miikka S. Väisälä,
Johannes Pekkilä,
Maarit J. Käpylä,
Matthias Rheinhardt,
Hsien Shang,
Ruben Krasnopolsky
Abstract:
Magnetohydrodynamical (MHD) dynamos emerge in many different astrophysical situations where turbulence is present, but the interaction between large-scale (LSD) and small-scale dynamos (SSD) is not fully understood. We performed a systematic study of turbulent dynamos driven by isotropic forcing in isothermal MHD with magnetic Prandtl number of unity, focusing on the exponential growth stage. Both…
▽ More
Magnetohydrodynamical (MHD) dynamos emerge in many different astrophysical situations where turbulence is present, but the interaction between large-scale (LSD) and small-scale dynamos (SSD) is not fully understood. We performed a systematic study of turbulent dynamos driven by isotropic forcing in isothermal MHD with magnetic Prandtl number of unity, focusing on the exponential growth stage. Both helical and non-helical forcing was employed to separate the effects of LSD and SSD in a periodic domain. Reynolds numbers (Rm) up to $\approx 250$ were examined and multiple resolutions used for convergence checks. We ran our simulations with the Astaroth code, designed to accelerate 3D stencil computations on graphics processing units (GPUs) and to employ multiple GPUs with peer-to-peer communication. We observed a speedup of $\approx 35$ in single-node performance compared to the widely used multi-CPU MHD solver Pencil Code. We estimated the growth rates both from the averaged magnetic fields and their power spectra. At low Rm, LSD growth dominates, but at high Rm SSD appears to dominate in both helically and non-helically forced cases. Pure SSD growth rates follow a logarithmic scaling as a function of Rm. Probability density functions of the magnetic field from the growth stage exhibit SSD behaviour in helically forced cases even at intermediate Rm. We estimated mean-field turbulence transport coefficients using closures like the second-order correlation approximation (SOCA). They yield growth rates similar to the directly measured ones and provide evidence of $α$ quenching. Our results are consistent with the SSD inhibiting the growth of the LSD at moderate Rm, while the dynamo growth is enhanced at higher Rm.
△ Less
Submitted 16 December, 2020;
originally announced December 2020.
-
Two-dimensional Particle-in-Cell simulations of axisymmetric black hole magnetospheres
Authors:
Kouichi Hirotani,
Ruben Krasnopolsky,
Hsien Shang,
Ken-ichi Nishikawa,
Michael Watson
Abstract:
We investigate the temporal evolution of an axisymmetric magnetosphere around a rapidly rotating, stellar-mass black hole, applying a two-dimensional particle-in-cell simulation scheme. Adopting a homogeneous pair production, and assuming that the mass accretion rate is much less than the Eddington limit, we find that the black hole's rotational energy is preferentially extracted from the middle l…
▽ More
We investigate the temporal evolution of an axisymmetric magnetosphere around a rapidly rotating, stellar-mass black hole, applying a two-dimensional particle-in-cell simulation scheme. Adopting a homogeneous pair production, and assuming that the mass accretion rate is much less than the Eddington limit, we find that the black hole's rotational energy is preferentially extracted from the middle latitudes, and that this outward energy flux exhibits an enhancement that lasts approximately 160 dynamical time scales. It is demonstrated that the magnetohydrodynamic approximations cannot be justified in such a magnetically-dominated magnetosphere, because the Ohm's law completely breaks down, and because the charge-separated electron-positron plasmas are highly non-neutral. An implication is given regarding the collimation of relativistic jets.
△ Less
Submitted 13 December, 2020;
originally announced December 2020.
-
The Interplay between Ambipolar Diffusion and Hall Effect on Magnetic Field Decoupling and Protostellar Disc Formation
Authors:
Bo Zhao,
Paola Caselli,
Zhi-Yun Li,
Ruben Krasnopolsky,
Hsien Shang,
Ka Ho Lam
Abstract:
Non-ideal MHD effects have been shown recently as a robust mechanism of averting the magnetic braking "catastrophe" and promoting protostellar disc formation. However, the magnetic diffusivities that determine the efficiency of non-ideal MHD effects are highly sensitive to microphysics. We carry out non-ideal MHD simulations to explore the role of microphysics on disc formation and the interplay b…
▽ More
Non-ideal MHD effects have been shown recently as a robust mechanism of averting the magnetic braking "catastrophe" and promoting protostellar disc formation. However, the magnetic diffusivities that determine the efficiency of non-ideal MHD effects are highly sensitive to microphysics. We carry out non-ideal MHD simulations to explore the role of microphysics on disc formation and the interplay between ambipolar diffusion (AD) and Hall effect during the protostellar collapse. We find that removing the smallest grain population ($\lesssim$10 nm) from the standard MRN size distribution is sufficient for enabling disc formation. Further varying the grain sizes can result in either a Hall-dominated or an AD-dominated collapse; both form discs of tens of AU in size regardless of the magnetic field polarity. The direction of disc rotation is bimodal in the Hall dominated collapse but unimodal in the AD-dominated collapse. We also find that AD and Hall effect can operate either with or against each other in both radial and azimuthal directions, yet the combined effect of AD and Hall is to move the magnetic field radially outward relative to the infalling envelope matter. In addition, microphysics and magnetic field polarity can leave profound imprints both on observables (e.g., outflow morphology, disc to stellar mass ratio) and on the magnetic field characteristics of protoplanetary discs. Including Hall effect relaxes the requirements on microphysics for disc formation, so that prestellar cores with cosmic-ray ionization rate of $\lesssim$2--3$\times10^{-16}$ s$^{-1}$ can still form small discs of $\lesssim$10 AU radius. We conclude that disc formation should be relatively common for typical prestellar core conditions, and that microphysics in the protostellar envelope is essential to not only disc formation, but also protoplanetary disc evolution.
△ Less
Submitted 16 September, 2020;
originally announced September 2020.
-
Hall Effect in Protostellar Disc Formation and Evolution
Authors:
Bo Zhao,
Paola Caselli,
Zhi-Yun Li,
Ruben Krasnopolsky,
Hsien Shang,
Ka Ho Lam
Abstract:
The Hall effect is recently shown to be efficient in magnetized dense molecular cores, and could lead to a bimodal formation of rotationally supported discs (RSDs) in the first core phase. However, how such Hall dominated systems evolve in the protostellar accretion phase remains unclear. We carry out 2D axisymmetric simulations including Hall effect and Ohmic dissipation, with realistic magnetic…
▽ More
The Hall effect is recently shown to be efficient in magnetized dense molecular cores, and could lead to a bimodal formation of rotationally supported discs (RSDs) in the first core phase. However, how such Hall dominated systems evolve in the protostellar accretion phase remains unclear. We carry out 2D axisymmetric simulations including Hall effect and Ohmic dissipation, with realistic magnetic diffusivities computed from our equilibrium chemical network. We find that Hall effect only becomes efficient when the large population of very small grains (VSGs: $\lesssim$10 nm) is removed from the standard MRN size distribution. With such an enhanced Hall effect, however, the bimodality of disc formation does not continue into the main accretion phase. The outer part of the initial $\sim$40 AU disc formed in the anti-aligned configuration (${\bf Ω\cdot B}<0$) flattens into a thin rotationally supported Hall current sheet as Hall effect moves the poloidal magnetic field radially inward relative to matter, leaving only the inner $\lesssim$10--20 AU RSD. In the aligned configuration (${\bf Ω\cdot B}>0$), disc formation is suppressed initially but a counter-rotating disc forms subsequently due to efficient azimuthal Hall drift. The counter-rotating disc first grows to $\sim$30 AU as Hall effect moves the magnetic field radially outward, but only the inner $\lesssim$10 AU RSD is long-lived like in the anti-aligned case. Besides removing VSGs, cosmic ray ionization rate should be below a few 10$^{-16}$ s$^{-1}$ for Hall effect to be efficient in disc formation. We conclude that Hall effect produces small $\lesssim$10--20 AU discs regardless of the polarity of the magnetic field, and that radially outward diffusion of magnetic fields remains crucial for disc formation and growth.
△ Less
Submitted 16 September, 2020;
originally announced September 2020.
-
Transition from ordered pinched to warped magnetic field on a 100 au scale in the Class 0 protostar B335
Authors:
Hsi-Wei Yen,
Bo Zhao,
Patrick Koch,
Ruben Krasnopolsky,
Zhi-Yun Li,
Nagayoshi Ohashi,
Hsien Shang,
Shigehisa Takakuwa,
Ya-Wen Tang
Abstract:
We present our observational results of the 0.87 mm polarized dust emission in the Class 0 protostar B335 obtained with the Atacama Large Millimeter/submillimeter Array (ALMA) at a 0.2" (20 au) resolution. We compared our data at 0.87 mm with those at 1.3 mm from the ALMA archive. The observed polarization orientations at the two wavelengths are consistent within the uncertainty, and the polarizat…
▽ More
We present our observational results of the 0.87 mm polarized dust emission in the Class 0 protostar B335 obtained with the Atacama Large Millimeter/submillimeter Array (ALMA) at a 0.2" (20 au) resolution. We compared our data at 0.87 mm with those at 1.3 mm from the ALMA archive. The observed polarization orientations at the two wavelengths are consistent within the uncertainty, and the polarization percentages are systematically higher at 1.3 mm than 0.87 mm by a factor of ~1.7, suggesting that the polarized emission originates from magnetically aligned dust grains. We inferred the magnetic field orientations from the observed polarization orientations. We found that the magnetic field changes from ordered and highly pinched to more complicated and asymmetric structures within the inner 100 au scale of B335, and the magnetic field connects to the center along the equatorial plane as well as along the directions which are ~40-60 degrees from the equatorial plane. We performed non-ideal MHD simulations of collapsing dense cores. We found that similar magnetic field structures appear in our simulations of dense cores with the magnetic field and rotational axis slightly misaligned by 15 degrees but not in those with the aligned magnetic field and rotational axis. Our results suggest that the midplane of the inner envelope within the inner 100 au scale of B335 could be warped because of the misaligned magnetic field and rotational axis, and the magnetic field could be dragged by the warped accretion flows.
△ Less
Submitted 9 March, 2020;
originally announced March 2020.
-
JCMT POL-2 and ALMA polarimetric observations of 6000-100 au scales in the protostar B335: linking magnetic field and gas kinematics in observations and MHD simulations
Authors:
Hsi-Wei Yen,
Bo Zhao,
I-Ta Hsieh,
Patrick Koch,
Ruben Krasnopolsky,
Chin-Fei Lee,
Zhi-Yun Li,
Sheng-Yuan Liu,
Nagayoshi Ohashi,
Shigehisa Takakuwa,
Ya-Wen Tang
Abstract:
We present our analysis of the magnetic field structures from 6000 au to 100 au scales in the Class 0 protostar B335 inferred from our JCMT POL-2 observations and the ALMA archival polarimetric data. To interpret the observational results, we perform a series of (non-)ideal MHD simulations of the collapse of a rotating non-turbulent dense core, whose initial conditions are adopted to be the same a…
▽ More
We present our analysis of the magnetic field structures from 6000 au to 100 au scales in the Class 0 protostar B335 inferred from our JCMT POL-2 observations and the ALMA archival polarimetric data. To interpret the observational results, we perform a series of (non-)ideal MHD simulations of the collapse of a rotating non-turbulent dense core, whose initial conditions are adopted to be the same as observed in B335, and generate synthetic polarization maps. The comparison of our JCMT and simulation results suggests that the magnetic field on a 6000 au scale in B335 is pinched and well aligned with the bipolar outflow along the east-west direction. Among all our simulations, the ALMA polarimetric results are best explained with weak magnetic field models having an initial mass-to-flux ratio of 9.6. However, we find that with the weak magnetic field, the rotational velocity on a 100 au scale and the disk size in our simulations are larger than the observational estimates by a factor of several. An independent comparison of our simulations and the gas kinematics in B335 observed with the SMA and ALMA favors strong magnetic field models with an initial mass-to-flux ratio smaller than 4.8. We discuss two possibilities resulting in the different magnetic field strengths inferred from the polarimetric and molecular-line observations, (1) overestimated rotational-to-gravitational energy in B335 and (2) additional contributions in the polarized intensity due to scattering on a 100 au scale.
△ Less
Submitted 1 January, 2019;
originally announced January 2019.
-
Time Evolution of 3D Disk Formation with Misaligned Magnetic Field and Rotation Axes
Authors:
Miikka S. Väisälä,
Hsien Shang,
Ruben Krasnopolsky,
Sheng-Yuan Liu,
Ka Ho Lam,
Zhi-Yun Li
Abstract:
Distinguishing diagnostic observational signatures produced by MHD models is essential in understanding the physics for the formation of protostellar disks in the ALMA era. Develo** suitable tools along with time evolution will facilitate better identification of diagnostic features. With a ray-tracing based radiative transfer code Perspective, we explore time evolution of MHD models carried out…
▽ More
Distinguishing diagnostic observational signatures produced by MHD models is essential in understanding the physics for the formation of protostellar disks in the ALMA era. Develo** suitable tools along with time evolution will facilitate better identification of diagnostic features. With a ray-tracing based radiative transfer code Perspective, we explore time evolution of MHD models carried out in Li, Krasnopolsky & Shang (2013) - most of which have $90^\circ$ misalignment between the rotational axis and the magnetic field. Four visible object types can be characterized, origins of which are dependent on the initial conditions. Our results show complex spiraling density, velocity and polarization structures. The systems are under constant change, but many of those distinctive features are present already early on, and they grow more visible in time, but most could not be identified from the data without examining their change in time. The results suggest that spiraling pseudodisk structures could function as an effective observation signature of the formation process, and we witness accretion in the disk with eccentric orbits which appear as spiral-like perturbation from simple circular Keplerian orbits. Magnetically aligned polarization appears purely azimuthal in the disk and magnetic field can lead to precession of the disk.
△ Less
Submitted 30 December, 2018;
originally announced December 2018.
-
The formation of rings and gaps in wind-launching non-ideal MHD disks: three-dimensional simulations
Authors:
Scott S. Suriano,
Zhi-Yun Li,
Ruben Krasnopolsky,
Takeru K. Suzuki,
Hsien Shang
Abstract:
Previous axisymmetric investigations in two dimensions (2D) have shown that rings and gaps develop naturally in non-ideal magnetohydrodynamic (MHD) disk-wind systems, especially in the presence of ambipolar diffusion (AD). Here we extend these 2D simulations to three dimensions (3D) and find that rings and gaps are still formed in the presence of a moderately strong ambipolar diffusion. The rings…
▽ More
Previous axisymmetric investigations in two dimensions (2D) have shown that rings and gaps develop naturally in non-ideal magnetohydrodynamic (MHD) disk-wind systems, especially in the presence of ambipolar diffusion (AD). Here we extend these 2D simulations to three dimensions (3D) and find that rings and gaps are still formed in the presence of a moderately strong ambipolar diffusion. The rings and gaps form from the same basic mechanism that was identified in the 2D simulations, namely, the redistribution of the poloidal magnetic flux relative to the disk material as a result of the reconnection of a sharply pinched poloidal magnetic field lines. Thus, the less dense gaps are more strongly magnetized with a large poloidal magnetic field compared to the less magnetized (dense) rings. The rings and gaps start out rather smoothly in 3D simulations that have axisymmetric initial conditions. Non-axisymmetric variations arise spontaneously at later times, but they do not grow to such an extent as to disrupt the rings and gaps. These disk substructures persist to the end of the simulations, lasting up to 3000 orbital periods at the inner edge of the simulated disk. The longevity of the perturbed yet still coherent rings make them attractive sites for trap** large grains that would otherwise be lost to rapid radial migration due to gas drag. As the ambipolar diffusivity decreases, both the disk and the wind become increasingly turbulent, driven by the magnetorotational instability, with tightly-wound spiral arms becoming more prominent in the disk.
△ Less
Submitted 16 December, 2018; v1 submitted 4 October, 2018;
originally announced October 2018.
-
Constraint on ion-neutral drift velocity in the Class 0 protostar B335 from ALMA observations
Authors:
Hsi-Wei Yen,
Bo Zhao,
Patrick M. Koch,
Ruben Krasnopolsky,
Zhi-Yun Li,
Nagayoshi Ohashi,
Shigehisa Takakuwa
Abstract:
Ambipolar diffusion can cause a velocity drift between ions and neutrals. This is one of the non-ideal MHD effects proposed to enable the formation of Keplerian disks with sizes of tens of au. To observationally study ambipolar diffusion in collapsing protostellar envelopes, we compare gas kinematics traced by the H13CO+ (3-2) and C18O (2-1) lines in the Class 0 protostar B335 obtained with our AL…
▽ More
Ambipolar diffusion can cause a velocity drift between ions and neutrals. This is one of the non-ideal MHD effects proposed to enable the formation of Keplerian disks with sizes of tens of au. To observationally study ambipolar diffusion in collapsing protostellar envelopes, we compare gas kinematics traced by the H13CO+ (3-2) and C18O (2-1) lines in the Class 0 protostar B335 obtained with our ALMA observations. A central compact (~1"-2") component that is elongated perpendicular to the outflow direction and exhibits a clear velocity gradient along the outflow direction is observed in both lines and most likely traces the infalling flattened envelope. We constructed kinematical models to fit the observed velocity structures and to measure the infalling velocities of the ionized and neutral gas on a 100 au scale in B335. The infalling velocities in the H13CO+ and C18O emission are both measured to be 0.85+/-0.2 km/s at a radius of 100 au, suggesting that the velocity drift between the ionized and neutral gas is at most 0.3 km/s at a radius of 100 au. The Hall parameter for H13CO+ is estimated to be >>1 on a 100 au scale in B335, so that H13CO+ is expected to be attached to the magnetic field. Our non-detection or upper limit of the velocity drift between ions and neutrals could suggest that the magnetic field remains rather well coupled to the bulk neutral material on a 100 au scale in this source, and that any significant field-matter decoupling, if present, likely occurs only on a smaller scale, leading to an accumulation of magnetic flux and thus efficient magnetic braking in the inner envelope. However, because of our limited angular resolution, we cannot rule out a significant ambipolar drift only in the midplane of the infalling envelope. Future observations with higher angular resolutions (~0.1") are needed to examine this possibility and ambipolar diffusion on a smaller scale.
△ Less
Submitted 27 March, 2018;
originally announced March 2018.
-
Resolving the polarized dust emission of the disk around the massive star powering the HH~80-81 radio jet
Authors:
J. M. Girart,
M. Fernandez-Lopez,
Z. -Y. Li,
H. Yang,
R. Estalella,
G. Anglada,
N. Añez-Lopez,
G. Busquet,
C. Carrasco-Gonzalez,
S. Curiel,
R. Galvan-Madrid,
J. F. Gomez,
I. de Gregorio-Monsalvo,
I. Jimenez-Serra,
R. Krasnopolsky,
J. Marti,
M. Osorio,
M. Padovani,
R. Rao,
L. F. Rodriguez,
J. M. Torrelles
Abstract:
Here we present deep (16 mumJy), very high (40 mas) angular resolution 1.14 mm, polarimetric, Atacama Large Millimeter/submillimeter Array (ALMA) observations towards the massive protostar driving the HH 80-81 radio jet. The observations clearly resolve the disk oriented perpendicular to the radio jet, with a radius of ~0.171 arcsec (~291 au at 1.7 kpc distance). The continuum brightness temperatu…
▽ More
Here we present deep (16 mumJy), very high (40 mas) angular resolution 1.14 mm, polarimetric, Atacama Large Millimeter/submillimeter Array (ALMA) observations towards the massive protostar driving the HH 80-81 radio jet. The observations clearly resolve the disk oriented perpendicular to the radio jet, with a radius of ~0.171 arcsec (~291 au at 1.7 kpc distance). The continuum brightness temperature, the intensity profile, and the polarization properties clearly indicate that the disk is optically thick for a radius of R<170 au. The linear polarization of the dust emission is detected almost all along the disk and its properties suggest that dust polarization is produced mainly by self-scattering. However, the polarization pattern presents a clear differentiation between the inner (optically thick) part of the disk and the outer (optically thin) region of the disk, with a sharp transition that occurs at a radius of 0.1 arcsec (~170 au). The polarization characteristics of the inner disk suggest that dust settling has not occurred yet with a maximum dust grain size between 50 and 500 mum. The outer part of the disk has a clear azimuthal pattern but with a significantly higher polarization fraction compared to the inner disk. This pattern is broadly consistent with self-scattering of a radiation field that is beamed radially outward, as expected in the optically thin outer region, although contribution from non-spherical grains aligned with respect to the radiative flux cannot be excluded.
△ Less
Submitted 16 March, 2018;
originally announced March 2018.
-
The formation of rings and gaps in magnetically coupled disk-wind systems: ambipolar diffusion and reconnection
Authors:
Scott S. Suriano,
Zhi-Yun Li,
Ruben Krasnopolsky,
Hsien Shang
Abstract:
Radial substructures in circumstellar disks are now routinely observed by ALMA. There is also growing evidence that disk winds drive accretion in such disks. We show through 2D (axisymmetric) simulations that rings and gaps develop naturally in magnetically coupled disk-wind systems on the scale of tens of au, where ambipolar diffusion (AD) is the dominant non-ideal MHD effect. In simulations wher…
▽ More
Radial substructures in circumstellar disks are now routinely observed by ALMA. There is also growing evidence that disk winds drive accretion in such disks. We show through 2D (axisymmetric) simulations that rings and gaps develop naturally in magnetically coupled disk-wind systems on the scale of tens of au, where ambipolar diffusion (AD) is the dominant non-ideal MHD effect. In simulations where the magnetic field and matter are moderately coupled, the disk remains relatively laminar with the radial electric current steepened by AD into a thin layer near the midplane. The toroidal magnetic field sharply reverses polarity in this layer, generating a large magnetic torque that drives fast accretion, which drags the poloidal field into a highly pinched radial configuration. The reconnection of this pinched field creates magnetic loops where the net poloidal magnetic flux (and thus the accretion rate) is reduced, yielding dense rings. Neighbouring regions with stronger poloidal magnetic fields accrete faster, forming gaps. In better magnetically coupled simulations, the so-called `avalanche accretion streams' develop continuously near the disk surface, rendering the disk-wind system more chaotic. Nevertheless, prominent rings and gaps are still produced, at least in part, by reconnection, which again enables the segregation of the poloidal field and the disk material similar to the more diffusive disks. However, the reconnection is now driven by the non-linear growth of MRI channel flows. The formation of rings and gaps in rapidly accreting yet laminar disks has interesting implications for dust settling and trap**, grain growth, and planet formation.
△ Less
Submitted 16 March, 2018; v1 submitted 17 December, 2017;
originally announced December 2017.
-
SMA and ALMA Studies of Disk- and Planet Formation around Low-mass Protostars
Authors:
Shigehisa Takakuwa,
Hsi-Wei Yen,
Ti-Lin Chou,
Nagayoshi Ohashi,
Yusuke Aso,
Patrick M. Koch,
Ruben Krasnopolsky,
Paul T. P. Ho,
Hauyu Baobab Liu,
Naomi Hirano,
Pin-Gao Gu,
Chin-Fei Lee,
Evaria Puspitaningrum,
Yuri Aikawa,
Masahiro N. Machida,
Kazuya Saigo,
Masao Saito,
Kengo Tomida,
Kohji Tomisaka
Abstract:
We report our current SMA and ALMA studies of disk and planet formation around protostars. We have revealed that $r \gtrsim$100 AU scale disks in Keplerian rotation are ubiquitous around Class I sources. These Class I Keplerian disks are often embedded in rotating and infalling protostellar envelopes. The infalling speeds of the protostellar envelopes are typically $\sim$ 3-times smaller than the…
▽ More
We report our current SMA and ALMA studies of disk and planet formation around protostars. We have revealed that $r \gtrsim$100 AU scale disks in Keplerian rotation are ubiquitous around Class I sources. These Class I Keplerian disks are often embedded in rotating and infalling protostellar envelopes. The infalling speeds of the protostellar envelopes are typically $\sim$ 3-times smaller than the free-fall velocities, and the rotational profiles follow the $r^{-1}$ profile, that is, rotation with the conserved specific angular momentum. Our latest high-resolution ($\sim$0$\farcs$5) ALMA studies, as well as the other studies in the literature, have unveiled that $r \sim$100-AU scale Keplerian disks are also present in several Class 0 protostars, while in the other Class 0 sources the inferred upper limits of the Keplerian disks are very small ($r \lessim$20 AU). Our recent data analyses of the ALMA long baseline data of the Class I-II source HL Tau have revealed gaps in molecular gas as well as in dust in the surrounding disk, suggesting the presence of sub-Jovian planets in the disk. These results imply that disk and planet formation should be completed in the protostellar stage.
△ Less
Submitted 1 November, 2017;
originally announced November 2017.
-
Decoupling of Magnetic Fields in Collapsing Protostellar Envelopes and Disk Formation and Fragmentation
Authors:
Bo Zhao,
Paola Caselli,
Zhi-Yun Li,
Ruben Krasnopolsky
Abstract:
Efficient magnetic braking is a formidable obstacle to the formation of rotationally supported disks (RSDs) around protostars in magnetized dense cores. We have previously shown, through 2D (axisymmetric) non-ideal MHD simulations, that removing very small grains (VSGs: ~10 Å$~$to few 100 Å) can greatly enhance ambipolar diffusion and enable the formation of RSDs. Here we extend the simulations of…
▽ More
Efficient magnetic braking is a formidable obstacle to the formation of rotationally supported disks (RSDs) around protostars in magnetized dense cores. We have previously shown, through 2D (axisymmetric) non-ideal MHD simulations, that removing very small grains (VSGs: ~10 Å$~$to few 100 Å) can greatly enhance ambipolar diffusion and enable the formation of RSDs. Here we extend the simulations of disk formation enabled by VSG removal to 3D. We find that the key to this scenario of disk formation is that the drift velocity of the magnetic field almost cancels out the infall velocity of the neutrals in the $10^2$-$10^3$ AU-scale "pseudo-disk" where the field lines are most severely pinched and most of protostellar envelope mass infall occurs. As a result, the bulk neutral envelope matter can collapse without dragging much magnetic flux into the disk-forming region, which lowers the magnetic braking efficiency. We find that the initial disks enabled by VSG removal tend to be Toomre-unstable, which leads to the formation of prominent spiral structures that function as centrifugal barriers. The piling-up of infall material near the centrifugal barrier often produces dense fragments of tens of Jupiter masses, especially in cores that are not too strongly magnetized. Some fragments accrete onto the central stellar object, producing bursts in mass accretion rate. Others are longer lived, although whether they can survive long-term to produce multiple systems remains to be ascertained. Our results highlight the importance of dust grain evolution in determining the formation and properties of protostellar disks and potentially multiple systems.
△ Less
Submitted 16 November, 2017; v1 submitted 20 June, 2017;
originally announced June 2017.
-
Rings and gaps produced by variable magnetic disk winds and avalanche accretion streams: I. Axisymmetric resistive MHD simulations
Authors:
Scott S. Suriano,
Zhi-Yun Li,
Ruben Krasnopolsky,
Hsien Shang
Abstract:
Rings and gaps are being observed in an increasing number of disks around young stellar objects. We illustrate the formation of such radial structures through idealized, 2D (axisymmetric) resistive MHD simulations of coupled disk-wind systems threaded by a relatively weak poloidal magnetic field (plasma-$β\sim 10^3$). We find two distinct modes of accretion depending on the resistivity and field s…
▽ More
Rings and gaps are being observed in an increasing number of disks around young stellar objects. We illustrate the formation of such radial structures through idealized, 2D (axisymmetric) resistive MHD simulations of coupled disk-wind systems threaded by a relatively weak poloidal magnetic field (plasma-$β\sim 10^3$). We find two distinct modes of accretion depending on the resistivity and field strength. A small resistivity or high field strength promotes the development of rapidly infalling `avalanche accretion streams' in a vertically extended disk envelope that dominates the dynamics of the system, especially the mass accretion. The streams are suppressed in simulations with larger resistivities or lower field strengths, where most of the accretion instead occurs through a laminar disk. In these simulations, the disk accretion is driven mainly by a slow wind that is typically accelerated by the pressure gradient from a predominantly toroidal magnetic field. Both wind-dominated and stream-dominated modes of accretion create prominent features in the surface density distribution of the disk, including rings and gaps, with a strong spatial variation of the magnetic flux relative to the mass. Regions with low mass-to-flux ratios accrete quickly, leading to the development of gaps, whereas regions with higher mass-to-flux ratios tend to accrete more slowly, allowing matter to accumulate and form dense rings. In some cases, avalanche accretion streams are observed to produce dense rings directly through continuous feeding. We discuss the implications of ring and gap formation driven by winds and streams on grain growth and planet formation.
△ Less
Submitted 29 March, 2017; v1 submitted 6 February, 2017;
originally announced February 2017.
-
Signs of Early-Stage Disk Growth Revealed with ALMA
Authors:
Hsi-Wei Yen,
Patrick M. Koch,
Shigehisa Takakuwa,
Ruben Krasnopolsky,
Nagayoshi Ohashi,
Yusuke Aso
Abstract:
We present ALMA 1.3 mm continuum, 12CO, C18O, and SO data for the Class 0 protostars, Lupus 3 MMS, IRAS 15398-3559, and IRAS 16253-2429 at resolutions of ~100 AU. By measuring a rotational profile in C18O, a 100 AU Keplerian disk around a 0.3 Msun protostar is observed in Lupus 3 MMS. No 100 AU Keplerian disks are observed in IRAS 15398-3559 and IRAS 16253-2429. Nevertheless, embedded compact (<30…
▽ More
We present ALMA 1.3 mm continuum, 12CO, C18O, and SO data for the Class 0 protostars, Lupus 3 MMS, IRAS 15398-3559, and IRAS 16253-2429 at resolutions of ~100 AU. By measuring a rotational profile in C18O, a 100 AU Keplerian disk around a 0.3 Msun protostar is observed in Lupus 3 MMS. No 100 AU Keplerian disks are observed in IRAS 15398-3559 and IRAS 16253-2429. Nevertheless, embedded compact (<30 AU) continuum components are detected. The C18O emission in IRAS 15398-3559 shows signatures of infall with a constant angular momentum. IRAS 16253-2429 exhibits signatures of infall and rotation, but its rotational profile is unresolved. By fitting the C18O data with our kinematic models, the protostellar masses and the disk radii are inferred to be 0.01 Msun and 20 AU in IRAS 15398-3559, and 0.03 Msun and 6 AU in IRAS 16253-2429. By comparing the specific angular momentum profiles from 10,000 to 100 AU in 8 Class 0 and I protostars, we find that the evolution of envelope rotation can be described with conventional inside-out collapse models. In comparison with a sample of 18 protostars with known disk radii, our results reveal signs of disk growth, with the disk radius increasing as M*^{0.8+/-0.14} or t^{1.09+\-0.37} in the Class 0 stage, where M* is the protostellar mass and t is the age. The disk growth rate slows down in the Class I stage. Besides, we find a hint that the mass accretion rate declines as t^{-0.26+\-0.04} from the Class 0 to I stages.
△ Less
Submitted 25 November, 2016;
originally announced November 2016.
-
Protostellar Disk Formation Enabled by Removal of Small Dust Grains
Authors:
Bo Zhao,
Paola Caselli,
Zhi-Yun Li,
Ruben Krasnopolsky,
Hsien Shang,
Fumitaka Nakamura
Abstract:
It has been shown that a realistic level of magnetization of dense molecular cloud cores can suppress the formation of a rotationally supported disk (RSD) through catastrophic magnetic braking in the axisymmetric ideal MHD limit. In this study, we present conditions for the formation of RSDs through non-ideal MHD effects computed self-consistently from an equilibrium chemical network. We find that…
▽ More
It has been shown that a realistic level of magnetization of dense molecular cloud cores can suppress the formation of a rotationally supported disk (RSD) through catastrophic magnetic braking in the axisymmetric ideal MHD limit. In this study, we present conditions for the formation of RSDs through non-ideal MHD effects computed self-consistently from an equilibrium chemical network. We find that removing from the standard MRN distribution the large population of very small grains (VSGs) of ~10 $Å$ to few 100 $Å$ that dominate the coupling of the bulk neutral matter to the magnetic field increases the ambipolar diffusivity by ~1--2 orders of magnitude at densities below 10$^{10}$ cm$^{-3}$. The enhanced ambipolar diffusion (AD) in the envelope reduces the amount of magnetic flux dragged by the collapse into the circumstellar disk-forming region. Therefore, magnetic braking is weakened and more angular momentum can be retained. With continuous high angular momentum inflow, RSDs of tens of AU are able to form, survive, and even grow in size, depending on other parameters including cosmic-ray ionization rate, magnetic field strength, and rotation speed. Some disks become self-gravitating and evolve into rings in our 2D (axisymmetric) simulations, which have the potential to fragment into (close) multiple systems in 3D. We conclude that disk formation in magnetized cores is highly sensitive to chemistry, especially to grain sizes. A moderate grain coagulation/growth to remove the large population of VSGs, either in the prestellar phase or during free-fall collapse, can greatly promote AD and help formation of tens of AU RSDs.
△ Less
Submitted 8 February, 2016;
originally announced February 2016.
-
A Two-Temperature Model of Magnetized Protostellar Outflows
Authors:
Liang-Yao Wang,
Hsien Shang,
Ruben Krasnopolsky,
Tzu-Yang Chiang
Abstract:
We explore kinematics and morphologies of molecular outflows driven by young protostars using magnetohydrodynamic simulations in the context of the unified wind model of Shang et al. The model explains the observed high-velocity jet and low-velocity shell features. In this work we investigate how these characteristics are affected by the underlying temperature and magnetic field strength. We study…
▽ More
We explore kinematics and morphologies of molecular outflows driven by young protostars using magnetohydrodynamic simulations in the context of the unified wind model of Shang et al. The model explains the observed high-velocity jet and low-velocity shell features. In this work we investigate how these characteristics are affected by the underlying temperature and magnetic field strength. We study the problem of a warm wind running into a cold ambient toroid by using a tracer field that keeps track of the wind material. While an isothermal equation of state is adopted, the effective temperature is determined locally based on the wind mass fraction. In the unified wind model, the density of the wind is cylindrically stratified and highly concentrated toward the outflow axis. Our simulations show that for a sufficiently magnetized wind, the jet identity can be well maintained even at high temperatures. However, for a high temperature wind with low magnetization, the thermal pressure of the wind gas can drive material away from the axis, making the jet less collimated as it propagates. We also study the role of the poloidal magnetic field of the toroid. It is shown that the wind-ambient interface becomes more resistant to corrugation when the poloidal field is present, and the poloidal field that bunches up within the toroid prevents the swept-up material from being compressed into a thin layer. This suggests that the ambient poloidal field may play a role in producing a smoother and thicker swept-up shell structure in the molecular outflow.
△ Less
Submitted 8 December, 2015;
originally announced December 2015.
-
No Keplerian Disk >10 AU around the Protostar B335: Magnetic Braking or Young Age?
Authors:
Hsi-Wei Yen,
Shigehisa Takakuwa,
Patrick M. Koch,
Yusuke Aso,
Shin Koyamatsu,
Ruben Krasnopolsky,
Nagayoshi Ohashi
Abstract:
We have conducted ALMA cycle 2 observations in the 1.3 mm continuum and in the C18O (2-1) and SO (5_6-4_5) lines at a resolution of ~0.3" toward the Class 0 protostar B335. The 1.3 mm continuum, C18O, and SO emission all show central compact components with sizes of ~40-180 AU within more extended components. The C18O component shows signs of infalling and rotational motion. By fitting simple kine…
▽ More
We have conducted ALMA cycle 2 observations in the 1.3 mm continuum and in the C18O (2-1) and SO (5_6-4_5) lines at a resolution of ~0.3" toward the Class 0 protostar B335. The 1.3 mm continuum, C18O, and SO emission all show central compact components with sizes of ~40-180 AU within more extended components. The C18O component shows signs of infalling and rotational motion. By fitting simple kinematic models to the C18O data, the protostellar mass is estimated to be 0.05 Msun. The specific angular momentum, on a 100 AU scale, is ~4.3E-5 km/s*pc. A similar specific angular momentum, ~3E-5 to 5E-5 km/s*pc, is measured on a 10 AU scale from the velocity gradient observed in the central SO component, and there is no clear sign of an infalling motion in the SO emission. By comparing the infalling and rotational motion, our ALMA results suggest that the observed rotational motion has not yet reached Keplerian velocity neither on a 100 AU nor even on a 10 AU scale. Consequently, the radius of the Keplerian disk in B335 (if present) is expected to be 1-3 AU. The expected disk radius in B335 is one to two orders of magnitude smaller than those of observed Keplerian disks around other Class 0 protostars. Based on the observed infalling and rotational motion from 0.1 pc to inner 100 AU scales, there are two possible scenarios to explain the presence of such a small Keplerian disk in B335: magnetic braking and young age. If our finding is the consequence of magnetic braking, ~50% of the angular momentum of the infalling material within a 1000 AU scale might have been removed, and the magnetic field strength on a 1000 AU scale is estimated to be ~200 uG. If it is young age, the infalling radius in B335 is estimated to be ~2700 AU, corresponding to a collapsing time scale of ~5E4 yr.
△ Less
Submitted 15 September, 2015;
originally announced September 2015.
-
A Hydrochemical Hybrid Code for Astrophysical Problems. I. Code Verification and Benchmarks for Photon-Dominated Region (PDR)
Authors:
Kazutaka Motoyama,
Oscar Morata,
Hsien Shang,
Ruben Krasnopolsky,
Tatsuhiko Hasegawa
Abstract:
A two dimensional hydrochemical hybrid code, KM2, is constructed to deal with astrophysical problems that would require coupled hydrodynamical and chemical evolution. The code assumes axisymmetry in cylindrical coordinate system, and consists of two modules: a hydrodynamics module and a chemistry module. The hydrodynamics module solves hydrodynamics using a Godunov-type finite volume scheme and tr…
▽ More
A two dimensional hydrochemical hybrid code, KM2, is constructed to deal with astrophysical problems that would require coupled hydrodynamical and chemical evolution. The code assumes axisymmetry in cylindrical coordinate system, and consists of two modules: a hydrodynamics module and a chemistry module. The hydrodynamics module solves hydrodynamics using a Godunov-type finite volume scheme and treats included chemical species as passively advected scalars. The chemistry module implicitly solves non-equilibrium chemistry and change of the energy due to thermal processes with transfer of external ultraviolet radiation. Self-shielding effects on photodissociation of CO and H$_2$ are included. In this introductory paper, the adopted numerical method is presented, along with code verifications using the hydrodynamics modules, and a benchmark on the chemistry module with reactions specific to a photon-dominated region (PDR). Finally, as an example of the expected capability, the hydrochemical evolution of a PDR is presented based on the PDR benchmark.
△ Less
Submitted 1 June, 2015;
originally announced June 2015.
-
On the Role of Pseudodisk War** and Reconnection in Protostellar Disk Formation in Turbulent Magnetized Cores
Authors:
Zhi-Yun Li,
Ruben Krasnopolsky,
Hsien Shang,
Bo Zhao
Abstract:
The formation of rotationally supported protostellar disks is suppressed in ideal MHD in non-turbulent cores with aligned magnetic field and rotation axis. A promising way to resolve this so-called "magnetic braking catastrophe" is through turbulence. The reason for the turbulence-enabled disk formation is usually attributed to the turbulence-induced magnetic reconnection, which is thought to redu…
▽ More
The formation of rotationally supported protostellar disks is suppressed in ideal MHD in non-turbulent cores with aligned magnetic field and rotation axis. A promising way to resolve this so-called "magnetic braking catastrophe" is through turbulence. The reason for the turbulence-enabled disk formation is usually attributed to the turbulence-induced magnetic reconnection, which is thought to reduce the magnetic flux accumulated in the disk-forming region. We advance an alternative interpretation, based on magnetic decoupling-triggered reconnection of severely pinched field lines close to the central protostar and turbulence-induced war** of the pseudodisk of Galli and Shu. Such reconnection weakens the central split magnetic monopole that lies at the heart of the magnetic braking catastrophe under flux freezing. We show, through idealized numerical experiments, that the pseudodisk can be strongly warped, but not completely destroyed, by a subsonic or sonic turbulence. The war** decreases the rates of angular momentum removal from the pseudodisk by both magnetic torque and outflow, making it easier to form a rotationally supported disk. More importantly, the war** of the pseudodisk out of the disk-forming, equatorial plane greatly reduces the amount of magnetic flux threading the circumstellar, disk-forming region, further promoting disk formation. The beneficial effects of pseudodisk war** can also be achieved by a misalignment between the magnetic field and rotation axis. These two mechanisms of disk formation, enabled by turbulence and field-rotation misalignment respectively, are thus unified. We find that the disks formed in turbulent magnetized cores are rather thick and significantly magnetized. Implications of these findings, particularly for the thick young disk inferred in L1527, are briefly discussed.
△ Less
Submitted 11 August, 2014;
originally announced August 2014.
-
ALMA Results of the Pseudodisk, Rotating disk, and Jet in Continuum and HCO+ in the Protostellar System HH 212
Authors:
Chin-Fei Lee,
Naomi Hirano,
Qizhou Zhang,
Hsien Shang,
Paul T. P. Ho,
Ruben Krasnopolsky
Abstract:
HH 212 is a nearby (400 pc) Class 0 protostellar system showing several components that can be compared with theoretical models of core collapse. We have mapped it in 350 GHz continuum and HCO+ J=4-3 emission with ALMA at up to ~ 0.4" resolution. A flattened envelope and a compact disk are seen in continuum around the central source, as seen before. The HCO+ kinematics shows that the flattened env…
▽ More
HH 212 is a nearby (400 pc) Class 0 protostellar system showing several components that can be compared with theoretical models of core collapse. We have mapped it in 350 GHz continuum and HCO+ J=4-3 emission with ALMA at up to ~ 0.4" resolution. A flattened envelope and a compact disk are seen in continuum around the central source, as seen before. The HCO+ kinematics shows that the flattened envelope is infalling with small rotation (i.e., spiraling) into the central source, and thus can be identified as a pseudodisk in the models of magnetized core collapse. Also, the HCO+ kinematics shows that the disk is rotating and can be rotationally supported. In addition, to account for the missing HCO+ emission at low-redshifted velocity, an extended infalling envelope is required, with its material flowing roughly parallel to the jet axis toward the pseudodisk. This is expected if it is magnetized with an hourglass B-field morphology. We have modeled the continuum and HCO+ emission of the flattened envelope and disk simultaneously. We find that a jump in density is required across the interface between the pseudodisk and the disk. A jet is seen in HCO+ extending out to ~ 500 AU away from the central source, with the peaks upstream of those seen before in SiO. The broad velocity range and high HCO+ abundance indicate that the HCO+ emission traces internal shocks in the jet.
△ Less
Submitted 24 March, 2014;
originally announced March 2014.
-
The Earliest Stages of Star and Planet Formation: Core Collapse, and the Formation of Disks and Outflows
Authors:
Zhi-Yun Li,
Robi Banerjee,
Ralph E. Pudritz,
Jes K. Jørgensen,
Hsien Shang,
Ruben Krasnopolsky,
Anaëlle Maury
Abstract:
(Abridged) In this review we focus on the observations and theory of the formation of early disks and outflows, and their connections with the first phases of planet formation. Large rotationally supported circumstellar disks, although common around more evolved young stellar objects, are rarely detected during the earliest, "Class 0" phase; however, a few excellent candidates have been discovered…
▽ More
(Abridged) In this review we focus on the observations and theory of the formation of early disks and outflows, and their connections with the first phases of planet formation. Large rotationally supported circumstellar disks, although common around more evolved young stellar objects, are rarely detected during the earliest, "Class 0" phase; however, a few excellent candidates have been discovered recently around both low and high mass protostars. In this early phase, prominent outflows are ubiquitously observed; they are expected to be associated with at least small magnetized disks. Disk formation - once thought to be a simple consequence of the conservation of angular momentum during hydrodynamic core collapse - is far more subtle in magnetized gas. In this case, the rotation can be strongly magnetically braked. Indeed, both analytic arguments and numerical simulations have shown that disk formation is suppressed in the strict ideal magnetohydrodynamic (MHD) limit for the observed level of core magnetization. We review what is known about this "magnetic braking catastrophe", possible ways to resolve it, and the current status of early disk observations. Outflows are also intimately linked to disk formation; they are a natural product of magnetic fields and rotation and are important signposts of star formation. We review new developments on early outflow generation since PPV. The properties of early disks and outflows are a key component of planet formation in its early stages and we review these major connections.
△ Less
Submitted 9 January, 2014;
originally announced January 2014.
-
Does Magnetic Field-Rotation Misalignment Solve the Magnetic Braking Catastrophe in Protostellar Disk Formation?
Authors:
Zhi-Yun Li,
Ruben Krasnopolsky,
Hsien Shang
Abstract:
Stars form in dense cores of molecular clouds that are observed to be significantly magnetized. In the simplest case of a laminar (non-turbulent) core with the magnetic field aligned with the rotation axis, both analytic considerations and numerical simulations have shown that the formation of a large, $10^2\au$-scale, rotationally supported protostellar disk is suppressed by magnetic braking in t…
▽ More
Stars form in dense cores of molecular clouds that are observed to be significantly magnetized. In the simplest case of a laminar (non-turbulent) core with the magnetic field aligned with the rotation axis, both analytic considerations and numerical simulations have shown that the formation of a large, $10^2\au$-scale, rotationally supported protostellar disk is suppressed by magnetic braking in the ideal MHD limit for a realistic level of core magnetization. This theoretical difficulty in forming protostellar disks is termed "magnetic braking catastrophe". A possible resolution to this problem, proposed by \citeauthor{HennebelleCiardi2009} and \citeauthor{Joos+2012}, is that misalignment between the magnetic field and rotation axis may weaken the magnetic braking enough to enable disk formation. We evaluate this possibility quantitatively through numerical simulations. We confirm the basic result of \citeauthor{Joos+2012} that the misalignment is indeed conducive to disk formation. In relatively weakly magnetized cores with dimensionless mass-to-flux ratio $\gtrsim 5$, it enabled the formation of rotationally supported disks that would otherwise be suppressed if the magnetic field and rotation axis are aligned. For more strongly magnetized cores, disk formation remains suppressed, however, even for the maximum tilt angle of $90\degree$. If dense cores are as strongly magnetized as indicated by OH Zeeman observations (with a mean dimensionless mass-to-flux ratio $\sim 2$), it would be difficult for the misalignment alone to enable disk formation in the majority of them. We conclude that, while beneficial to disk formation, especially for the relatively weak field case, the misalignment does not completely solve the problem of catastrophic magnetic braking in general.
△ Less
Submitted 25 January, 2013;
originally announced January 2013.
-
Protostellar Accretion Flows Destabilized by Magnetic Flux Redistribution
Authors:
Ruben Krasnopolsky,
Zhi-Yun Li,
Hsien Shang,
Bo Zhao
Abstract:
Magnetic flux redistribution lies at the heart of the problem of star formation in dense cores of molecular clouds that are magnetized to a realistic level. If all of the magnetic flux of a typical core were to be dragged into the central star, the stellar field strength would be orders of magnitude higher than the observed values. This well-known "magnetic flux problem" can in principle be resolv…
▽ More
Magnetic flux redistribution lies at the heart of the problem of star formation in dense cores of molecular clouds that are magnetized to a realistic level. If all of the magnetic flux of a typical core were to be dragged into the central star, the stellar field strength would be orders of magnitude higher than the observed values. This well-known "magnetic flux problem" can in principle be resolved through non-ideal MHD effects. Two dimensional (axisymmetric) calculations have shown that ambipolar diffusion, in particular, can transport magnetic flux outward relative to matter, allowing material to enter the central object without dragging the field lines along. We show through simulations that such axisymmetric protostellar accretion flows are unstable in three dimensions to magnetic interchange instability in the azimuthal direction. The instability is driven by the magnetic flux redistributed from the matter that enters the central object. It typically starts to develop during the transition from the prestellar phase of star formation to the protostellar mass accretion phase. In the latter phase, the magnetic flux is transported outward mainly through advection, by strongly magnetized low-density regions that expand against the collapsing inflow. The tussle between the gravity-driven infall and magnetically driven expansion leads to a filamentary inner accretion flow, more disordered than previously pictured. The efficient outward transport of magnetic flux by advection lowers the field strength at small radii, making the magnetic braking less efficient and the formation of rotationally supported disks easier in principle. However, we find no evidence for such disks in any of our rotating collapse simulations. We conclude that the inner protostellar accretion flow is shaped to a large extent by this magnetic interchange instability. How disks form in such an environment is unclear.
△ Less
Submitted 18 May, 2012;
originally announced May 2012.
-
Nonideal MHD Effects and Magnetic Braking Catastrophe in Protostellar Disk Formation
Authors:
Zhi-Yun Li,
Ruben Krasnopolsky,
Hsien Shang
Abstract:
Dense, star-forming, cores of molecular clouds are observed to be significantly magnetized. A realistic magnetic field of moderate strength has been shown to suppress, through catastrophic magnetic braking, the formation of a rotationally supported disk during the protostellar accretion phase of low-mass star formation in the ideal MHD limit. We address, through 2D (axisymmetric) simulations, the…
▽ More
Dense, star-forming, cores of molecular clouds are observed to be significantly magnetized. A realistic magnetic field of moderate strength has been shown to suppress, through catastrophic magnetic braking, the formation of a rotationally supported disk during the protostellar accretion phase of low-mass star formation in the ideal MHD limit. We address, through 2D (axisymmetric) simulations, the question of whether realistic levels of nonideal effects, computed with a simplified chemical network including dust grains, can weaken the magnetic braking enough to enable a rotationally supported disk to form. We find that ambipolar diffusion, the dominant nonideal MHD effect over most of the density range relevant to disk formation, does not enable disk formation, at least in 2D. The reason is that ambipolar diffusion allows the magnetic flux that would be dragged into the central stellar object in the ideal MHD limit to pile up instead in a small circumstellar region, where the magnetic field strength (and thus the braking efficiency) is greatly enhanced. We also find that, on the scale of tens of AU or more, a realistic level of Ohmic dissipation does not weaken the magnetic braking enough for a rotationally supported disk to form, either by itself or in combination with ambipolar diffusion. The Hall effect, the least explored of these three nonideal MHD effects, can spin up the material close to the central object to a significant, supersonic rotation speed, even when the core is initially non-rotating, although the spun-up material remains too sub-Keplerian to form a rotationally supported disk. The problem of catastrophic magnetic braking that prevents disk formation in dense cores magnetized to realistic levels remains unresolved. Possible resolutions of this problem are discussed.
△ Less
Submitted 14 June, 2011;
originally announced June 2011.
-
Magnetic Flux Expulsion in Star Formation
Authors:
Bo Zhao,
Zhi-Yun Li,
Fumitaka Nakamura,
Ruben Krasnopolsky,
Hsien Shang
Abstract:
Stars form in dense cores of magnetized molecular clouds. If the magnetic flux threading the cores is dragged into the stars, the stellar field would be orders of magnitude stronger than observed. This well-known "magnetic flux problem" demands that most of the core magnetic flux be decoupled from the matter that enters the star. We carry out the first exploration of what happens to the decoupled…
▽ More
Stars form in dense cores of magnetized molecular clouds. If the magnetic flux threading the cores is dragged into the stars, the stellar field would be orders of magnitude stronger than observed. This well-known "magnetic flux problem" demands that most of the core magnetic flux be decoupled from the matter that enters the star. We carry out the first exploration of what happens to the decoupled magnetic flux in 3D, using an MHD version of the ENZO adaptive mesh refinement code. The field-matter decoupling is achieved through a sink particle treatment, which is needed to follow the protostellar accretion phase of star formation. We find that the accumulation of the decoupled flux near the accreting protostar leads to a magnetic pressure buildup. The high pressure is released anisotropically, along the path of least resistance. It drives a low-density expanding region in which the decoupled magnetic flux is expelled. This decoupling-enabled magnetic structure has never been seen before in 3D MHD simulations of star formation. It generates a strong asymmetry in the protostellar accretion flow, potentially giving a kick to the star. In the presence of an initial core rotation, the structure presents an obstacle to the formation of a rotationally supported disk, in addition to magnetic braking, by acting as a rigid magnetic wall that prevents the rotating gas from completing a full orbit around the central object. We conclude that the decoupled magnetic flux from the stellar matter can strongly affect the protostellar collapse dynamics.
△ Less
Submitted 28 May, 2011;
originally announced May 2011.
-
Disk Formation in Magnetized Clouds Enabled by the Hall Effect
Authors:
Ruben Krasnopolsky,
Zhi-Yun Li,
Hsien Shang
Abstract:
Stars form in dense cores of molecular clouds that are observed to be significantly magnetized. A dynamically important magnetic field presents a significant obstacle to the formation of protostellar disks. Recent studies have shown that magnetic braking is strong enough to suppress the formation of rotationally supported disks in the ideal MHD limit. Whether non-ideal MHD effects can enable disk…
▽ More
Stars form in dense cores of molecular clouds that are observed to be significantly magnetized. A dynamically important magnetic field presents a significant obstacle to the formation of protostellar disks. Recent studies have shown that magnetic braking is strong enough to suppress the formation of rotationally supported disks in the ideal MHD limit. Whether non-ideal MHD effects can enable disk formation remains unsettled. We carry out a first study on how disk formation in magnetic clouds is modified by the Hall effect, the least explored of the three non-ideal MHD effects in star formation (the other two being ambipolar diffusion and Ohmic dissipation). For illustrative purposes, we consider a simplified problem of a non-self-gravitating, magnetized envelope collapsing onto a central protostar of fixed mass. We find that the Hall effect can spin up the inner part of the collapsing flow to Keplerian speed, producing a rotationally supported disk. The disk is generated through a Hall-induced magnetic torque. Disk formation occurs even when the envelope is initially non-rotating, provided that the Hall coefficient is large enough. When the magnetic field orientation is flipped, the direction of disk rotation is reversed as well. The implication is that the Hall effect can in principle produce both regularly rotating and counter-rotating disks around protostars. We conclude that the Hall effect is an important factor to consider in studying the angular momentum evolution of magnetized star formation in general and disk formation in particular.
△ Less
Submitted 15 January, 2011;
originally announced January 2011.
-
Disk Formation Enabled by Enhanced Resistivity
Authors:
Ruben Krasnopolsky,
Zhi-Yun Li,
Hsien Shang
Abstract:
Disk formation in magnetized cloud cores is hindered by magnetic braking. Previous work has shown that for realistic levels of core magnetization, the magnetic field suppresses the formation of rotationally supported disks during the protostellar mass accretion phase of low-mass star formation both in the ideal MHD limit and in the presence of ambipolar diffusion for typical rates of cosmic ray io…
▽ More
Disk formation in magnetized cloud cores is hindered by magnetic braking. Previous work has shown that for realistic levels of core magnetization, the magnetic field suppresses the formation of rotationally supported disks during the protostellar mass accretion phase of low-mass star formation both in the ideal MHD limit and in the presence of ambipolar diffusion for typical rates of cosmic ray ionization. Additional effects, such as ohmic dissipation, the Hall effect, and protostellar outflow, are needed to weaken the magnetic braking and enable the formation of persistent, rotationally supported, protostellar disks. In this paper, we first demonstrate that the classic microscopic resistivity is not large enough to enable disk formation by itself. We then experiment with a set of enhanced values for the resistivity in the range $η=10^{17}$--$10^{22}$ cm^2/s. We find that a value of order $10^{19}$ cm^2/s is needed to enable the formation of a 100 AU-scale Keplerian disk; the value depends somewhat on the degree of core magnetization. The required resistivity is a few orders of magnitude larger than the classic microscopic values. Whether it can be achieved naturally during protostellar collapse remains to be determined.
△ Less
Submitted 4 June, 2010;
originally announced June 2010.
-
Magnetocentrifugal Winds in 3D: Nonaxisymmetric Steady State
Authors:
Jeffrey M. Anderson,
Zhi-Yun Li,
Ruben Krasnopolsky,
Roger D. Blandford
Abstract:
Outflows can be loaded and accelerated to high speeds along rapidly rotating, open magnetic field lines by centrifugal forces. Whether such magnetocentrifugally driven winds are stable is a longstanding theoretical problem. As a step towards addressing this problem, we perform the first large-scale 3D MHD simulations that extend to a distance $\sim 10^2$ times beyond the launching region, starti…
▽ More
Outflows can be loaded and accelerated to high speeds along rapidly rotating, open magnetic field lines by centrifugal forces. Whether such magnetocentrifugally driven winds are stable is a longstanding theoretical problem. As a step towards addressing this problem, we perform the first large-scale 3D MHD simulations that extend to a distance $\sim 10^2$ times beyond the launching region, starting from steady 2D (axisymmetric) solutions. In an attempt to drive the wind unstable, we increase the mass loading on one half of the launching surface by a factor of $\sqrt{10}$, and reduce it by the same factor on the other half. The evolution of the perturbed wind is followed numerically. We find no evidence for any rapidly growing instability that could disrupt the wind during the launching and initial phase of propagation, even when the magnetic field of the magnetocentrifugal wind is toroidally dominated all the way to the launching surface. The strongly perturbed wind settles into a new steady state, with a highly asymmetric mass distribution. The distribution of magnetic field strength is, in contrast, much more symmetric. We discuss possible reasons for the apparent stability, including stabilization by an axial poloidal magnetic field, which is required to bend field lines away from the vertical direction and produce a magnetocentrifugal wind in the first place.
△ Less
Submitted 20 October, 2006;
originally announced October 2006.
-
Nonlinear Criterion for the Stability of Molecular Clouds
Authors:
Ruben Krasnopolsky,
Charles F. Gammie
Abstract:
Dynamically significant magnetic fields are routinely observed in molecular clouds, with mass-to-flux ratio lambda = (2 pi sqrt{G}) (Sigma/B) ~ 1 (here Sigma is the total column density and B is the field strength). It is widely believed that ``subcritical'' clouds with lambda < 1 cannot collapse, based on virial arguments by Mestel and Spitzer and a linear stability analysis by Nakano and Nakam…
▽ More
Dynamically significant magnetic fields are routinely observed in molecular clouds, with mass-to-flux ratio lambda = (2 pi sqrt{G}) (Sigma/B) ~ 1 (here Sigma is the total column density and B is the field strength). It is widely believed that ``subcritical'' clouds with lambda < 1 cannot collapse, based on virial arguments by Mestel and Spitzer and a linear stability analysis by Nakano and Nakamura. Here we confirm, using high resolution numerical models that begin with a strongly supersonic velocity dispersion, that this criterion is a fully nonlinear stability condition. All the high-resolution models with lambda <= 0.95 form ``Spitzer sheets'' but collapse no further. All models with lambda >= 1.02 collapse to the maximum numerically resolvable density. We also investigate other factors determining the collapse time for supercritical models. We show that there is a strong stochastic element in the collapse time: models that differ only in details of their initial conditions can have collapse times that vary by as much as a factor of 3. The collapse time cannot be determined from just the velocity dispersion; it depends also on its distribution. Finally, we discuss the astrophysical implications of our results.
△ Less
Submitted 28 December, 2005;
originally announced December 2005.
-
The Structure of Magnetocentrifugal Winds I. Steady Mass Loading
Authors:
Jeffrey M. Anderson,
Zhi-Yun Li,
Ruben Krasnopolsky,
Roger D. Blandford
Abstract:
We present the results of a series of time-dependent numerical simulations of cold, magnetocentrifugally launched winds from accretion disks. Our simulations span four and half decades of mass loading; in the context of a disk with a launching region from $0.1\AU$ to $1.0\AU$ around a $1\solarmass$ star and a field strength of about $20\gauss$ at the inner disk edge, this amounts to mass loss ra…
▽ More
We present the results of a series of time-dependent numerical simulations of cold, magnetocentrifugally launched winds from accretion disks. Our simulations span four and half decades of mass loading; in the context of a disk with a launching region from $0.1\AU$ to $1.0\AU$ around a $1\solarmass$ star and a field strength of about $20\gauss$ at the inner disk edge, this amounts to mass loss rates of $1\times 10^{-9}$ -- $3\times 10^{-5}\solarmassyear$ from each side of the disk. We find that the degree of collimation of the wind increases with mass loading; however even the ``lightest'' wind simulated is significantly collimated compared with the force-free magnetic configuration of the same magnetic flux distribution. The implication is that for flows from young stellar objects a radial field approximation is inappropriate. Surprisingly, the terminal velocity of the wind and the magnetic lever arm are still well-described by the analytical solutions for a radial field geometry. We also find that the isodensity contours and Alfvén surface are very nearly self-similar in mass loading. The wind becomes unsteady above some critical mass loading rate. For a small enough injection speed, we are able to obtain the first examples of a class of heavily-loaded magnetocentrifugal winds with magnetic fields completely dominated by the toroidal component all the way to the launching surface.
△ Less
Submitted 31 May, 2005; v1 submitted 28 October, 2004;
originally announced October 2004.
-
Magneto-Centrifugal Launching of Jets from Accretion Disks. II: Inner Disk-Driven Winds
Authors:
Ruben Krasnopolsky,
Zhi-Yun Li,
Roger D. Blandford
Abstract:
We follow numerically the time evolution of axisymmetric outflows driven magneto-centrifugally from the inner portion of accretion disks, from their launching surface to large, observable distances. Special attention is paid to the collimation of part of the outflow into a dense, narrow jet around the rotation axis, after a steady state has been reached. For parameters typical of T Tauri stars,…
▽ More
We follow numerically the time evolution of axisymmetric outflows driven magneto-centrifugally from the inner portion of accretion disks, from their launching surface to large, observable distances. Special attention is paid to the collimation of part of the outflow into a dense, narrow jet around the rotation axis, after a steady state has been reached. For parameters typical of T Tauri stars, we define a fiducial ``jet'' as outlined by the contour of constant density at 10^4 cm^{-3}. We find that the jet, so defined, appears nearly cylindrical well above the disk, in agreement with previous asymptotic analyses. Closer to the equatorial plane, the density contour can either bulge outwards or pinch inwards, depending on the conditions at the launching surface, particularly the mass flux distribution. We find that even though a dense, jet-like feature is always formed around the axis, there is no guarantee that the high-density axial jet would dominate the more tenuous, wide-angle part of the wind. Specifically, on the 100 AU scale, resolvable by HST and ground-based adaptive optics for nearby T Tauri winds, the fraction of the wind mass flux enclosed by the fiducial jet can vary substantially, again depending on the launching conditions. We show two examples in which the fraction is ~20% and ~45%. These dependences may provide a way to constrain the conditions at the launching surface, which are poorly known at present.
△ Less
Submitted 24 June, 2003;
originally announced June 2003.
-
Locating the Launching Region of T Tauri Winds: The Case of DG Tau
Authors:
Jeffrey M. Anderson,
Zhi-Yun Li,
Ruben Krasnopolsky,
Roger Blandford
Abstract:
It is widely believed that T Tauri winds are driven magnetocentrifugally from accretion disks close to the central stars. The exact launching conditions are uncertain. We show that a general relation exists between the poloidal and toroidal velocity components of a magnetocentrifugal wind at large distances and the rotation rate of the launching surface, independent of the uncertain launching co…
▽ More
It is widely believed that T Tauri winds are driven magnetocentrifugally from accretion disks close to the central stars. The exact launching conditions are uncertain. We show that a general relation exists between the poloidal and toroidal velocity components of a magnetocentrifugal wind at large distances and the rotation rate of the launching surface, independent of the uncertain launching conditions. We discuss the physical basis of this relation and verify it using a set of numerically-determined large-scale wind solutions. Both velocity components are in principle measurable from spatially resolved spectra, as has been done for the extended low-velocity component (LVC) of the DG Tau wind by Bacciotti et al. For this particular source, we infer that the spatially resolved LVC originates from a region on the disk extending from $\sim 0.3$ to $\sim 4.0\AU$ from the star, which is consistent with, and a refinement over, the previous rough estimate of Bacciotti et al.
△ Less
Submitted 7 April, 2003;
originally announced April 2003.
-
Self-similar Collapse of Rotating Magnetic Molecular Cloud Cores
Authors:
Ruben Krasnopolsky,
Arieh Konigl
Abstract:
We present self-similar solutions that describe the gravitational collapse of rotating, isothermal, magnetic molecular-cloud cores, relevant to the formation of rotationally supported protostellar disks. This work focuses on the evolution after a point mass first forms at the center and generalizes previous results by Contopoulos, Ciolek, & Konigl that did not include rotation. Our model include…
▽ More
We present self-similar solutions that describe the gravitational collapse of rotating, isothermal, magnetic molecular-cloud cores, relevant to the formation of rotationally supported protostellar disks. This work focuses on the evolution after a point mass first forms at the center and generalizes previous results by Contopoulos, Ciolek, & Konigl that did not include rotation. Our model includes ambipolar diffusion and magnetic braking and allows us to examine the full range of expected behaviors and their dependence on the physical parameters. For typical parameter values, the inflow first passes through an ambipolar-diffusion shock (at a radius r_a, where the magnetic flux decouples from the matter), and later through a centrifugal shock at r=r_c, the outer edge of a rotationally supported disk of mass M_d. By the time (~10^5 yr) that the central mass M_c grows to ~1 M_\sun, r_a may be larger than 1000 AU, r_c larger than 100 AU, and M_d/M_c smaller than 10%. Disk properties are consistent with data on T Tauri systems, and our results imply that protostellar disks may well be Keplerian also during earlier phases. We show that the disk is likely to drive centrifugal outflows transporting angular momentum and mass, and we incorporate these effects into the model. We verify that gravitational torques and magnetorotational instability-induced turbulence typically do not play an important role in the angular momentum transport. We also present solutions for the limiting cases of fast rotation (where collapse results in a massive disk with such a large outer radius that it traps the ambipolar diffusion front) and strong braking (where no disk is formed and the collapse resembles that of a nonrotating core at small radii), as well as solutions for the rotational collapse of ideal-MHD and nonmagnetic model cores.
△ Less
Submitted 28 August, 2002; v1 submitted 3 May, 2002;
originally announced May 2002.
-
Structure of Magnetocentrifugal Disk-Winds: From the Launching Surface to Large Distances
Authors:
Ruben Krasnopolsky,
Zhi-Yun Li,
Roger D. Blandford
Abstract:
Protostellar jets and winds are probably driven magnetocentrifugally from the surface of accretion disks close to the central stellar objects. The exact launching conditions on the disk, such as the distributions of magnetic flux and mass ejection rate, are poorly unknown. They could be constrained from observations at large distances, provided that a robust model is available to link the observ…
▽ More
Protostellar jets and winds are probably driven magnetocentrifugally from the surface of accretion disks close to the central stellar objects. The exact launching conditions on the disk, such as the distributions of magnetic flux and mass ejection rate, are poorly unknown. They could be constrained from observations at large distances, provided that a robust model is available to link the observable properties of the jets and winds at the large distances to the conditions at the base of the flow. We discuss the difficulties in constructing such large-scale wind models, and describe a novel technique which enables us to numerically follow the acceleration and propagation of the wind from the disk surface to arbitrarily large distances and the collimation of part of the wind into a dense, narrow ``jet'' around the rotation axis. Special attention is paid to the shape of the jet and its mass flux relative to that of the whole wind. The mass flux ratio is a measure of the jet formation efficiency.
△ Less
Submitted 17 July, 2001;
originally announced July 2001.
-
Magneto-Centrifugal Launching of Jets from Accretion Disks. I: Cold Axisymmetric Flows
Authors:
R. Krasnopolsky,
Z. -Y. Li,
R. D. Blandford
Abstract:
The magneto-centrifugal model for jet formation is studied by time-dependent simulations reaching steady state in a cold gas with negligible fluid pressure, in an axisymmetric geometry, using a modification of the Zeus3D code adapted to parallel computers. The number of boundary conditions imposed at the coronal base takes into account the existence of the fast and Alfvenic critical surfaces, av…
▽ More
The magneto-centrifugal model for jet formation is studied by time-dependent simulations reaching steady state in a cold gas with negligible fluid pressure, in an axisymmetric geometry, using a modification of the Zeus3D code adapted to parallel computers. The number of boundary conditions imposed at the coronal base takes into account the existence of the fast and Alfvenic critical surfaces, avoiding over-determination of the flow. The size and shape of the computational box is chosen to include these critical surfaces, reducing the influence of the outer boundary conditions. As there is a region, near the origin, where the inclination of field lines to the axis is too small to drive a centrifugal wind, we inject a thin, axial jet, expected to form electromagnetically near black holes. Acceleration and collimation appear for wide generic conditions. A reference run is shown in detail, with a wind leaving the computational volume in the axial direction with a poloidal velocity equal to 4 times the poloidal Alfven speed, collimated inside 11 degrees. Finally, the critical surfaces, fieldlines, thrust, energy, torque and mass discharge of the outgoing wind are shown for simulations with various profiles of mass and magnetic flux at the base of the corona.
△ Less
Submitted 29 July, 1999; v1 submitted 14 February, 1999;
originally announced February 1999.
