-
Multipoint study of the rapid filament evolution during a confined C2 flare on 28 March 2022, leading to eruption
Authors:
Stefan Purkhart,
Astrid M. Veronig,
Bernhard Kliem,
Robert Jarolim,
Karin Dissauer,
Ewan C. M. Dickson,
Tatiana Podladchikova,
Säm Krucker
Abstract:
We studied the rapid filament evolution in AR 12975 during a confined C2 flare on 28 March 2022, which led to an eruptive M4 flare 1.5 h later. It is characterized by the breakup of the filament, the disappearance of its southern half, and the flow of the remaining plasma into a longer channel with a topology similar to an EUV hot channel during the flare. Our multipoint study takes advantage of S…
▽ More
We studied the rapid filament evolution in AR 12975 during a confined C2 flare on 28 March 2022, which led to an eruptive M4 flare 1.5 h later. It is characterized by the breakup of the filament, the disappearance of its southern half, and the flow of the remaining plasma into a longer channel with a topology similar to an EUV hot channel during the flare. Our multipoint study takes advantage of Solar Orbiter's position at 0.33 AU and 83. 5° west of the Sun-Earth line. STIX and EUI onboard Solar Orbiter observed the event at the limb. AIA and HMI onboard SDO provided on-disk observations from which we derived DEM maps and NLFF magnetic field extrapolations. We find that both filament channels likely existed in close proximity before the flare. Based on field structures associated with AIA 1600 Å flare ribbons and kernels, we propose a loop-loop reconnection scenario between field lines that surround and pass beneath the shorter filament channel, and field lines following a portion of the longer channel. Reconnection occurs in an essentially vertical current sheet at a PIL below the breakup region, leading to the formation of the flare loop arcade and the EUV hot channel. The scenario is supported by concentrated currents and free magnetic energy built up by antiparallel flows along the PIL before the flare. The reconnection probably propagated to involve the original filament itself, leading to its breakup and reformation. The reconnection geometry provides a general mechanism for the formation of the long filament channel and realizes the concept of tether cutting, which was active throughout the filament's rise phase, lasting from at least 30 min before the C2 flare until the eruption. The C2 flare represents a period of fast reconnection during this otherwise more steady process, during which most of the original filament was reconnected and joined the longer channel.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Multi-point study of the energy release and transport in the 28 March 2022, M4-flare using STIX, EUI, and AIA during the first Solar Orbiter nominal mission perihelion
Authors:
Stefan Purkhart,
Astrid M. Veronig,
Ewan C. M. Dickson,
Andrea Francesco Battaglia,
Säm Krucker,
Robert Jarolim,
Bernhard Kliem,
Karin Dissauer,
Tatiana Podladchikova
Abstract:
We present a case study of an M4-class flare on 28 March 2022, near Solar Orbiter's first science perihelion (0.33 AU). Solar Orbiter was 83.5° west of the Sun-Earth line, making the event appear near the eastern limb, while Earth-orbiting spacecraft observed it near the disk center. The timing and location of the STIX X-ray sources were related to the plasma evolution observed in the EUV by the E…
▽ More
We present a case study of an M4-class flare on 28 March 2022, near Solar Orbiter's first science perihelion (0.33 AU). Solar Orbiter was 83.5° west of the Sun-Earth line, making the event appear near the eastern limb, while Earth-orbiting spacecraft observed it near the disk center. The timing and location of the STIX X-ray sources were related to the plasma evolution observed in the EUV by the Extreme Ultraviolet Imager (EUI) on Solar Orbiter and the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory, and to the chromospheric response observed in 1600 Å by AIA. We performed differential emission measure (DEM) analysis to further characterize the flaring plasma at different subvolumes. The pre-flare magnetic field configuration was analyzed using a nonlinear force-free (NLFF) extrapolation. In addition to the two classical hard X-ray (HXR) footpoints at the ends of the flaring loops, later in the event we observe a nonthermal HXR source at one of the anchor points of the erupting filament. The evolution of the AIA 1600~Å footpoints indicates that this change in footpoint location represents a discontinuity in an otherwise continuous westward motion of the footpoints throughout the flare. The NLFF extrapolation suggests that strongly sheared field lines close to, or possibly even part of, the erupting filament reconnected with a weakly sheared arcade during the first HXR peak. The remainder of these field lines reconnected later in the event, producing the HXR peak at the southern filament footpoint. Our results show that the reconnection between field lines with very different shear in the early phase of the flare plays a crucial role in understanding the motion of the HXR footpoint during later parts of the flare. This generalizes simpler models, such as whip** reconnection, which only consider reconnection propagating along uniformly sheared arcades.
△ Less
Submitted 3 October, 2023;
originally announced October 2023.
-
A Model for Confined Solar Eruptions Including External Reconnection
Authors:
Jun Chen,
Xin Cheng,
Bernhard Kliem,
Mingde Ding
Abstract:
The violent disruption of the coronal magnetic field is often observed to be restricted to the low corona, appearing as a confined eruption. The possible causes of the confinement remain elusive. Here, we model the eruption of a magnetic flux rope in a quadrupolar active region, with the parameters set such that magnetic X-lines exist both below and above the rope. This facilitates the onset of ma…
▽ More
The violent disruption of the coronal magnetic field is often observed to be restricted to the low corona, appearing as a confined eruption. The possible causes of the confinement remain elusive. Here, we model the eruption of a magnetic flux rope in a quadrupolar active region, with the parameters set such that magnetic X-lines exist both below and above the rope. This facilitates the onset of magnetic reconnection in either place but with partly opposing effects on the eruption. The lower reconnection initially adds poloidal flux to the rope, increasing the upward hoop force and supporting the rise of the rope. However, when the flux of the magnetic side lobes enters the lower reconnection, the flux rope is found to separate from the reconnection site and the flux accumulation ceases. At the same time, the upper reconnection begins to reduce the poloidal flux of the rope, decreasing its hoop force; eventually this cuts the rope completely. The relative weight of the two reconnection processes is varied in the model, and it is found that their combined effect and the tension force of the overlying field confine the eruption if the flux ratio of the outer to the inner polarities exceeds a threshold, which is about 1.3 for our Cartesian box and chosen parameters. We hence propose that external reconnection between an erupting flux rope and overlying flux can play a vital role in confining eruptions.
△ Less
Submitted 8 June, 2023;
originally announced June 2023.
-
A Model of Homologous Confined and Ejective Eruptions Involving Kink Instability and Flux Cancellation
Authors:
Alshaimaa Hassanin,
Bernhard Kliem,
Norbert Seehafer,
Tibor Török
Abstract:
In this study, we model a sequence of a confined and a full eruption, employing the relaxed end state of the confined eruption of a kink-unstable flux rope as the initial condition for the ejective one. The full eruption, a model of a coronal mass ejection, develops as a result of converging motions imposed at the photospheric boundary, which drive flux cancellation. In this process, parts of the…
▽ More
In this study, we model a sequence of a confined and a full eruption, employing the relaxed end state of the confined eruption of a kink-unstable flux rope as the initial condition for the ejective one. The full eruption, a model of a coronal mass ejection, develops as a result of converging motions imposed at the photospheric boundary, which drive flux cancellation. In this process, parts of the positive and negative external flux converge toward the polarity inversion line, reconnect, and cancel each other. Flux of the same amount as the canceled flux transfers to a flux rope, increasing the free magnetic energy of the coronal field. With sustained flux cancellation and the associated progressive weakening of the magnetic tension of the overlying flux, we find that a flux reduction of $\approx\!11\%$ initiates the torus instability of the flux rope, which leads to a full eruption. These results demonstrate that a homologous full eruption, following a confined one, can be driven by flux cancellation.
△ Less
Submitted 25 April, 2022;
originally announced April 2022.
-
Helicity shedding by flux rope ejection
Authors:
B. Kliem,
N. Seehafer
Abstract:
We quantitatively address the conjecture that magnetic helicity must be shed from the Sun by eruptions launching coronal mass ejections in order to limit its accumulation in each hemisphere. By varying the ratio of guide and strap** field and the flux rope twist in a parametric simulation study of flux rope ejection from approximately marginally stable force-free equilibria, different ratios of…
▽ More
We quantitatively address the conjecture that magnetic helicity must be shed from the Sun by eruptions launching coronal mass ejections in order to limit its accumulation in each hemisphere. By varying the ratio of guide and strap** field and the flux rope twist in a parametric simulation study of flux rope ejection from approximately marginally stable force-free equilibria, different ratios of self- and mutual helicity are set and the onset of the torus or helical kink instability is obtained. The helicity shed is found to vary over a broad range from a minor to a major part of the initial helicity, with self helicity being largely or completely shed and mutual helicity, which makes up the larger part of the initial helicity, being shed only partly. Torus-unstable configurations with subcritical twist and without a guide field shed up to about two-thirds of the initial helicity, while a highly twisted, kink-unstable configuration sheds only about one-quarter. The parametric study also yields stable force-free flux rope equilibria up to a total flux-normalized helicity of 0.25, with a ratio of self- to total helicity of 0.32 and a ratio of flux rope to external poloidal flux of 0.94. These results numerically demonstrate the conjecture of helicity shedding by coronal mass ejections and provide a first account of its parametric dependence. Both self- and mutual helicity are shed significantly; this reduces the total initial helicity by a fraction of $\sim\!0.4\mbox{--}0.65$ for typical source region parameters.
△ Less
Submitted 10 March, 2022; v1 submitted 10 December, 2021;
originally announced December 2021.
-
Partial Eruption, Confinement, and Twist Buildup and Release of a Double-decker Filament
Authors:
Jialin Chen,
Yingna Su,
Rui Liu,
Bernhard Kliem,
Qingmin Zhang,
Haisheng Ji,
Tie Liu
Abstract:
We investigate the failed partial eruption of a filament system in NOAA AR 12104 on 2014 July 5, using multiwavelength EUV, magnetogram, and H$α$ observations, as well as magnetic field modeling. The filament system consists of two almost co-spatial segments with different end points, both resembling a C shape. Following an ejection and a precursor flare related to flux cancellation, only the uppe…
▽ More
We investigate the failed partial eruption of a filament system in NOAA AR 12104 on 2014 July 5, using multiwavelength EUV, magnetogram, and H$α$ observations, as well as magnetic field modeling. The filament system consists of two almost co-spatial segments with different end points, both resembling a C shape. Following an ejection and a precursor flare related to flux cancellation, only the upper segment rises and then displays a prominent twisted structure, while rolling over toward its footpoints. The lower segment remains undisturbed, indicating that the system possesses a double-decker structure. The erupted segment ends up with a reverse-C shape, with material draining toward its footpoints, while losing its twist. Using the flux rope insertion method, we construct a model of the source region that qualitatively reproduces key elements of the observed evolution. At the eruption onset, the model consists of a flux rope atop a flux bundle with negligible twist, which is consistent with the observational interpretation that the filament possesses a double-decker structure. The flux rope reaches the critical height of the torus instability during its initial relaxation, while the lower flux bundle remains in stable equilibrium. The eruption terminates when the flux rope reaches a dome-shaped quasi-separatrix layer that is reminiscent of a magnetic fan surface, although no magnetic null is found. The flux rope is destroyed by reconnection with the confining overlying flux above the dome, transferring its twist in the process.
△ Less
Submitted 25 November, 2021;
originally announced November 2021.
-
Pre-eruption Splitting of the Double-Decker Structure in a Solar Filament
Authors:
Hanya Pan,
Rui Liu,
Tingyu Gou,
Bernhard Kliem,
Yingna Su,
Jun Chen,
Yuming Wang
Abstract:
Solar filaments often erupt partially. Although how they split remains elusive, the splitting process has the potential of revealing the filament structure and eruption mechanism. Here we investigate the pre-eruption splitting of an apparently single filament and its subsequent partial eruption on 2012 September 27. The evolution is characterized by three stages with distinct dynamics. During the…
▽ More
Solar filaments often erupt partially. Although how they split remains elusive, the splitting process has the potential of revealing the filament structure and eruption mechanism. Here we investigate the pre-eruption splitting of an apparently single filament and its subsequent partial eruption on 2012 September 27. The evolution is characterized by three stages with distinct dynamics. During the quasi-static stage, the splitting proceeds gradually for about 1.5 hrs, with the upper branch rising at a few kilometers per second and displaying swirling motions about its axis. During the precursor stage that lasts for about 10 min, the upper branch rises at tens of kilometers per second, with a pair of conjugated dimming regions starting to develop at its footpoints; with the swirling motions turning chaotic, the axis of the upper branch whips southward, which drives an arc-shaped EUV front propagating in the similar direction. During the eruption stage, the upper branch erupts with the onset of a C3.7-class two-ribbon flare, while the lower branch remains stable. Judging from the well separated footpoints of the upper branch from those of the lower one, we suggest that the pre-eruption filament processes a double-decker structure composed of two distinct flux bundles, whose formation is associated with gradual magnetic flux cancellations and converging photospheric flows around the polarity inversion line.
△ Less
Submitted 9 January, 2021;
originally announced January 2021.
-
Non-equilibrium Flux Rope Formation by Confined Flares Preceding a Solar Coronal Mass Ejection
Authors:
Bernhard Kliem,
Jeongwoo Lee,
Rui Liu,
Stephen M. White,
Chang Liu,
Satoshi Masuda
Abstract:
We present evidence that a magnetic flux rope was formed before a coronal mass ejection (CME) and its associated long-duration flare during a pair of preceding confined eruptions and associated impulsive flares in a compound event in NOAA Active Region 12371. Extreme-ultraviolet images and the extrapolated nonlinear force-free field show that the first two, impulsive flares, SOL2015-06-21T01:42, r…
▽ More
We present evidence that a magnetic flux rope was formed before a coronal mass ejection (CME) and its associated long-duration flare during a pair of preceding confined eruptions and associated impulsive flares in a compound event in NOAA Active Region 12371. Extreme-ultraviolet images and the extrapolated nonlinear force-free field show that the first two, impulsive flares, SOL2015-06-21T01:42, result from the confined eruption of highly sheared low-lying flux, presumably a seed flux rope. The eruption spawns a vertical current sheet, where magnetic reconnection creates flare ribbons and loops, a nonthermal microwave source, and a sigmoidal hot channel which can only be interpreted as a magnetic flux rope. Until the subsequent long-duration flare, SOL2015-06-21T02:36, the sigmoid's elbows expand, while its center remains stationary, suggesting non-equilibrium but not yet instability. The "flare reconnection" during the confined eruptions acts like "tether-cutting reconnection" whose flux feeding of the rope leads to instability. The subsequent full eruption is seen as an accelerated rise of the entire hot channel, seamlessly evolving into the fast halo CME. Both the confined and ejective eruptions are consistent with the onset of the torus instability in the dipped decay index profile which results from the region's two-scale magnetic structure. We suggest that the formation or enhancement of a non-equilibrium but stable flux rope by confined eruptions is a generic process occurring prior to many CMEs.
△ Less
Submitted 7 January, 2021; v1 submitted 6 January, 2021;
originally announced January 2021.
-
Laboratory study of the torus instability threshold in solar-relevant, line-tied magnetic flux ropes
Authors:
Andrew Alt,
Clayton E. Myers,
Hantao Ji,
Jonathan Jara-Almonte,
Jongsoo Yoo,
Sayak Bose,
Aaron Goodman,
Masaaki Yamada,
Bernhard Kliem,
Antonia Savcheva
Abstract:
Coronal mass ejections (CME) occur when long-lived magnetic flux ropes (MFR) anchored to the solar surface destabilize and erupt away from the Sun. This destabilization is often described in terms of an ideal magnetohydrodynamic (MHD) instability called the torus instability. It occurs when the external magnetic field decreases sufficiently fast such that its decay index,…
▽ More
Coronal mass ejections (CME) occur when long-lived magnetic flux ropes (MFR) anchored to the solar surface destabilize and erupt away from the Sun. This destabilization is often described in terms of an ideal magnetohydrodynamic (MHD) instability called the torus instability. It occurs when the external magnetic field decreases sufficiently fast such that its decay index, $n=-z\,\partial\,(\ln B)/\partial z$ is larger than a critical value, $n>n_{\rm cr}$, where $n_{\rm cr}=1.5$ for a full, large aspect ratio torus. However, when this is applied to solar MFRs, a range of conflicting values for $n_{\rm cr}$ is found in the literature. To investigate this discrepancy, we have conducted laboratory experiments on arched, line-tied flux ropes and have applied a theoretical model of the torus instability. Our model describes an MFR as a partial torus with footpoints anchored in a conducting surface and numerically calculates various magnetic forces on it. This calculation yields a better prediction of $n_{\rm cr}$ which takes into account the specific parameters of the MFR. We describe a systematic methodology to properly translate laboratory results to their solar counterparts, provided that the MFRs have sufficiently small edge safety factor, or equivalently, large enough twist. After this translation, our model predicts that $n_{\rm cr}$ in solar conditions often falls near $n_{\rm cr}^{\rm Sol}\sim0.9$ and within a larger range of $n_{\rm cr}^{\rm Sol}\sim(0.7,1.2)$ depending on the parameters. The methodology of translating laboratory MFRs to their solar counterparts enables quantitative investigations of the initiation of CMEs through laboratory experiments. These experiments allow for new physics insights that are required for better predictions of space weather events but are difficult to obtain otherwise.
△ Less
Submitted 20 October, 2020;
originally announced October 2020.
-
Decoding the Pre-Eruptive Magnetic Field Configurations of Coronal Mass Ejections
Authors:
S. Patsourakos,
A. Vourlidas,
T. Török,
B. Kliem,
S. K. Antiochos,
V. Archontis,
G. Aulanier,
X. Cheng,
G. Chintzoglou,
M. K. Georgoulis,
L. M. Green,
J. E. Leake,
R. Moore,
A. Nindos,
P. Syntelis,
S. L. Yardley,
V. Yurchyshyn,
J. Zhang
Abstract:
A clear understanding of the nature of the pre-eruptive magnetic field configurations of Coronal Mass Ejections (CMEs) is required for understanding and eventually predicting solar eruptions. Only two, but seemingly disparate, magnetic configurations are considered viable; namely, sheared magnetic arcades (SMA) and magnetic flux ropes (MFR). They can form via three physical mechanisms (flux emerge…
▽ More
A clear understanding of the nature of the pre-eruptive magnetic field configurations of Coronal Mass Ejections (CMEs) is required for understanding and eventually predicting solar eruptions. Only two, but seemingly disparate, magnetic configurations are considered viable; namely, sheared magnetic arcades (SMA) and magnetic flux ropes (MFR). They can form via three physical mechanisms (flux emergence, flux cancellation, helicity condensation) . Whether the CME culprit is an SMA or an MFR, however, has been strongly debated for thirty years. We formed an International Space Science Institute (ISSI) team to address and resolve this issue and report the outcome here. We review the status of the field across modeling and observations, identify the open and closed issues, compile lists of SMA and MFR observables to be tested against observations and outline research activities to close the gaps in our current understanding. We propose that the combination of multi-viewpoint multi-thermal coronal observations and multi-height vector magnetic field measurements is the optimal approach for resolving the issue conclusively. We demonstrate the approach using MHD simulations and synthetic coronal images.
Our key conclusion is that the differentiation of pre-eruptive configurations in terms of SMAs and MFRs seems artificial. Both observations and modeling can be made consistent if the pre-eruptive configuration exists in a hybrid state that is continuously evolving from an SMA to an MFR. Thus, the 'dominant' nature of a given configuration will largely depend on its evolutionary stage (SMA-like early-on, MFR-like near the eruption).
△ Less
Submitted 20 October, 2020;
originally announced October 2020.
-
Coronal Mini-jets in an Activated Solar Tornado-like Prominence
Authors:
Huadong Chen,
Jun Zhang,
Bart De Pontieu,
Suli Ma,
Bernhard Kliem,
Eric Priest
Abstract:
High-resolution observations from the $Interface~Region~Imaging~Spectrometer$ ($IRIS$) reveal the existence of a particular type of small solar jets, which arose singly or in clusters from a tornado-like prominence suspended in the corona. In this study, we perform a detailed statistical analysis of 43 selected mini-jets in the tornado event. Our results show that the mini-jets typically have: (1)…
▽ More
High-resolution observations from the $Interface~Region~Imaging~Spectrometer$ ($IRIS$) reveal the existence of a particular type of small solar jets, which arose singly or in clusters from a tornado-like prominence suspended in the corona. In this study, we perform a detailed statistical analysis of 43 selected mini-jets in the tornado event. Our results show that the mini-jets typically have: (1) a projected length of 1.0-6.0 Mm, (2) a width of 0.2-1.0 Mm, (3) a lifetime of 10-50 s, (4) a velocity of 100-350 km s$^{-1}$, and (5) an acceleration of 3-20 km s$^{-2}$. Based on spectral diagnostics and EM-Loci analysis, these jets seem to be multi-thermal small-scale plasma ejections with an estimated average electron density of $\sim$2.4 $\times$ 10$^{10}$ cm$^{-3}$ and an approximate mean temperature of $\sim$2.6 $\times$ 10$^{5}$ K. Their mean kinetic energy density, thermal energy density and dissipated magnetic field strength are roughly estimated to be $\sim$9 erg cm$^{-3}$, 3 erg cm$^{-3}$, and 16 G, respectively. The accelerations of the mini-jets, the UV and EUV brightenings at the footpoints of some mini-jets, and the activation of the host prominence suggest that the tornado mini-jets are probably created by fine-scale external or internal magnetic reconnections (a) between the prominence field and the envelo** or background field or (b) between twisted or braided flux tubes within the prominence. The observations provide insight into the geometry of such reconnection events in the corona and have implications for the structure of the prominence magnetic field and the instability that is responsible for the eruption of prominences and coronal mass ejections.
△ Less
Submitted 15 June, 2020;
originally announced June 2020.
-
Initiation and Early Kinematic Evolution of Solar Eruptions
Authors:
X. Cheng,
J. Zhang,
B. Kliem,
T. {Török},
C. Xing,
Z. J. Zhou,
B. Inhester,
M. D. Ding
Abstract:
We investigate the initiation and early evolution of 12 solar eruptions, including six active region hot channel and six quiescent filament eruptions, which were well observed by the \textsl{Solar Dynamics Observatory}, as well as by the \textsl{Solar TErrestrial RElations Observatory} for the latter. The sample includes one failed eruption and 11 coronal mass ejections, with velocities ranging fr…
▽ More
We investigate the initiation and early evolution of 12 solar eruptions, including six active region hot channel and six quiescent filament eruptions, which were well observed by the \textsl{Solar Dynamics Observatory}, as well as by the \textsl{Solar TErrestrial RElations Observatory} for the latter. The sample includes one failed eruption and 11 coronal mass ejections, with velocities ranging from 493 to 2140~km~s$^{-1}$. A detailed analysis of the eruption kinematics yields the following main results. (1) The early evolution of all events consists of a slow-rise phase followed by a main-acceleration phase, the height-time profiles of which differ markedly and can be best fit, respectively, by a linear and an exponential function. This indicates that different physical processes dominate in these phases, which is at variance with models that involve a single process. (2) The kinematic evolution of the eruptions tends to be synchronized with the flare light curve in both phases. The synchronization is often but not always close. A delayed onset of the impulsive flare phase is found in the majority of the filament eruptions (5 out of 6). This delay, and its trend to be larger for slower eruptions, favor ideal MHD instability models. (3) The average decay index at the onset heights of the main acceleration is close to the threshold of the torus instability for both groups of events (although based on a tentative coronal field model for the hot channels), suggesting that this instability initiates and possibly drives the main acceleration.
△ Less
Submitted 7 April, 2020;
originally announced April 2020.
-
Extreme Ultraviolet Late Phase of Solar Flares
Authors:
Jun Chen,
Rui Liu,
Kai Liu,
Arun Kumar Awasthi,
Pe** Zhang,
Yuming Wang,
Bernhard Kliem
Abstract:
A second peak in extreme ultraviolet sometimes appears during the gradual phase of solar flares, which is known as EUV late phase (ELP). Stereotypically ELP is associated with two separated sets of flaring loops with distinct sizes, and it has been debated whether ELP is caused by additional heating or extended plasma cooling in the longer loop system. Here we carry out a survey of 55 M-and-above…
▽ More
A second peak in extreme ultraviolet sometimes appears during the gradual phase of solar flares, which is known as EUV late phase (ELP). Stereotypically ELP is associated with two separated sets of flaring loops with distinct sizes, and it has been debated whether ELP is caused by additional heating or extended plasma cooling in the longer loop system. Here we carry out a survey of 55 M-and-above GOES-class flares with ELP during 2010--2014. Based on the flare-ribbon morphology, these flares are categorized as circular-ribbon (19 events), two-ribbon (23 events), and complex-ribbon (13 events) flares. Among them, 22 events (40%) are associated with coronal mass ejections, while the rest are confined. An extreme ELP, with the late-phase peak exceeding the main-phase peak, is found in 48% of two-ribbon flares, 37% of circular-ribbon flares, and 31% of complex-ribbon flares, suggesting that additional heating is more likely present during ELP in two-ribbon than in circular-ribbon flares. Overall, cooling may be the dominant factor causing the delay of the ELP peak relative to the main-phase peak, because the loop system responsible for the ELP emission is generally larger than, and well separated from, that responsible for the main-phase emission. All but one of the circular-ribbon flares can be well explained by a composite "dome-plate" quasi-separatrix layer (QSL). Only half of these show a magnetic null point, with its fan and spine embedded in the dome and plate, respectively. The dome-plate QSL, therefore, is a general and robust structure characterizing circular-ribbon flares.
△ Less
Submitted 19 January, 2020;
originally announced January 2020.
-
The Birth of A Coronal Mass Ejection
Authors:
Tingyu Gou,
Rui Liu,
Bernhard Kliem,
Yuming Wang,
Astrid M. Veronig
Abstract:
The Sun's atmosphere is frequently disrupted by coronal mass ejections (CMEs), coupled with flares and energetic particles. In the standard picture, the coupling is explained by magnetic reconnection at a vertical current sheet connecting the flare loops and the CME, with the latter embedding a helical magnetic structure known as flux rope. As it jumps upward due to instabilities or loss of equili…
▽ More
The Sun's atmosphere is frequently disrupted by coronal mass ejections (CMEs), coupled with flares and energetic particles. In the standard picture, the coupling is explained by magnetic reconnection at a vertical current sheet connecting the flare loops and the CME, with the latter embedding a helical magnetic structure known as flux rope. As it jumps upward due to instabilities or loss of equilibrium, the flux rope stretches the overlying coronal loops so that oppositely directed field is brought together underneath, creating the current sheet. However, both the origin of flux ropes and their nascent paths toward eruption remain elusive. Here we present an observation of how a stellar-sized CME bubble evolves continuously from plasmoids, mini flux ropes that are barely resolved, within half an hour. The eruption initiates when plasmoids springing from a vertical current sheet merge into a leading plasmoid occupying the upper tip of the current sheet. Rising at increasing speed to stretch the overlying loops, this leading plasmoid then expands impulsively into the CME bubble, in tandem with hard X-ray bursts. This observation illuminates for the first time a complete CME evolutionary path that has the capacity to accommodate a wide variety of plasma phenomena by bridging the gap between micro-scale dynamics and macro-scale activities.
△ Less
Submitted 23 January, 2019; v1 submitted 12 November, 2018;
originally announced November 2018.
-
Genesis and impulsive evolution of the 2017 September 10 coronal mass ejection
Authors:
Astrid M. Veronig,
Tatiana Podladchikova,
Karin Dissauer,
Manuela Temmer,
Daniel B. Seaton,
David Long,
**gnan Guo,
Bojan Vrsnak,
Louise Harra,
Bernhard Kliem
Abstract:
The X8.2 event of 10 September 2017 provides unique observations to study the genesis, magnetic morphology and impulsive dynamics of a very fast CME. Combining GOES-16/SUVI and SDO/AIA EUV imagery, we identify a hot ($T\approx 10-15$ MK) bright rim around a quickly expanding cavity, embedded inside a much larger CME shell ($T\approx 1-2$ MK). The CME shell develops from a dense set of large AR loo…
▽ More
The X8.2 event of 10 September 2017 provides unique observations to study the genesis, magnetic morphology and impulsive dynamics of a very fast CME. Combining GOES-16/SUVI and SDO/AIA EUV imagery, we identify a hot ($T\approx 10-15$ MK) bright rim around a quickly expanding cavity, embedded inside a much larger CME shell ($T\approx 1-2$ MK). The CME shell develops from a dense set of large AR loops ($\gtrsim$0.5 $R_s$), and seamlessly evolves into the CME front observed in LASCO C2. The strong lateral overexpansion of the CME shell acts as a piston initiating the fast EUV wave. The hot cavity rim is demonstrated to be a manifestation of the dominantly poloidal flux and frozen-in plasma added to the rising flux rope by magnetic reconnection in the current sheet beneath. The same structure is later observed as the core of the white light CME, challenging the traditional interpretation of the CME three-part morphology. The large amount of added magnetic flux suggested by these observations explains the extreme accelerations of the radial and lateral expansion of the CME shell and cavity, all reaching values of $5 - 10$ km s$^{-2}$. The acceleration peaks occur simultaneously with the first RHESSI $100-300$ keV hard X-ray burst of the associated flare, further underlining the importance of the reconnection process for the impulsive CME evolution. Finally, the much higher radial propagation speed of the flux rope in relation to the CME shell causes a distinct deformation of the white light CME front and shock.
△ Less
Submitted 22 October, 2018;
originally announced October 2018.
-
Unambiguous Evidence of Filament Splitting-Induced Partial Eruptions
Authors:
X. Cheng,
B. Kliem,
M. D. Ding
Abstract:
Coronal mass ejections are often considered to result from the full eruption of a magnetic flux rope (MFR). However, it is recognized that, in some events, the MFR may release only part of its flux, with the details of the implied splitting not completely established due to limitations in observations. Here, we investigate two partial eruption events including a confined and a successful one. Both…
▽ More
Coronal mass ejections are often considered to result from the full eruption of a magnetic flux rope (MFR). However, it is recognized that, in some events, the MFR may release only part of its flux, with the details of the implied splitting not completely established due to limitations in observations. Here, we investigate two partial eruption events including a confined and a successful one. Both partial eruptions are a consequence of the vertical splitting of a filament-hosting MFR involving internal reconnection. A loss of equilibrium in the rising part of the magnetic flux is suggested by the impulsive onset of both events and by the delayed onset of reconnection in the confined event. The remaining part of the flux might be line-tied to the photosphere in a bald patch separatrix surface, and we confirm the existence of extended bald-patch sections for the successful eruption. The internal reconnection is signified by brightenings in the body of one filament and between the rising and remaining parts of both filaments. It evolves quickly into the standard current sheet reconnection in the wake of the eruption. As a result, regardless of being confined or successful, both eruptions produce hard X-ray sources and flare loops below the erupting but above the surviving flux, as well as a pair of flare ribbons enclosing the latter.
△ Less
Submitted 13 February, 2018;
originally announced February 2018.
-
Helical Kink Instability in the confined Solar Eruption on 2002 May 27
Authors:
Alshaimaa Hassanin,
Bernhard Kliem,
Norbert Seehafer
Abstract:
This paper presents an improved MHD modeling of the confined filament eruption in solar active region NOAA~9957 on 2002 May~27 by extending the parametric studies of the event in Torok & Kliem 2005 and Hassanin & Kliem 2016. Here the initial flux rope equilibrium is chosen to possess a small apex height identical to the observed initial filament height, which implies a more realistic inclusion of…
▽ More
This paper presents an improved MHD modeling of the confined filament eruption in solar active region NOAA~9957 on 2002 May~27 by extending the parametric studies of the event in Torok & Kliem 2005 and Hassanin & Kliem 2016. Here the initial flux rope equilibrium is chosen to possess a small apex height identical to the observed initial filament height, which implies a more realistic inclusion of the photospheric line tying. The model matches the observations as closely as in the preceding studies, with the closest agreement again being obtained for an initial average flux rope twist of about $4π$. Thus, the model for strongly writhing confined solar eruptions, which assumes that a kink-unstable flux rope in the stability domain of the torus instability exists at the onset of the eruption's main acceleration phase, is further substantiated.
△ Less
Submitted 3 November, 2016;
originally announced November 2016.
-
Helical Kink Instability in a Confined Solar Eruption
Authors:
Alshaimaa Hassanin,
Bernhard Kliem
Abstract:
A model for strongly writhing confined solar eruptions suggests an origin in the helical kink instability of a coronal flux rope which remains stable against the torus instability. This model is tested against the well observed filament eruption on 2002 May 27 in a parametric MHD simulation study which comprises all phases of the event. Good agreement with the essential observed properties is obta…
▽ More
A model for strongly writhing confined solar eruptions suggests an origin in the helical kink instability of a coronal flux rope which remains stable against the torus instability. This model is tested against the well observed filament eruption on 2002 May 27 in a parametric MHD simulation study which comprises all phases of the event. Good agreement with the essential observed properties is obtained. These include the confinement, terminal height, writhing, distortion, and dissolution of the filament, and the flare loops. The agreement is robust against variations in a representative range of parameter space. Careful comparisons with the observation data constrain the ratio of the external toroidal and poloidal field components to $B_\mathrm{et}/B_\mathrm{ep}\approx1$ and the initial flux rope twist to $Φ\approx4π$. Different from ejective eruptions, two distinct phases of strong magnetic reconnection can occur. First, the erupting flux is cut by reconnection with overlying flux in the helical current sheet formed by the instability. If the resulting flux bundles are linked as a consequence of the erupting rope's strong writhing, they subsequently reconnect in the vertical current sheet between them. This reforms the overlying flux and a far less twisted flux rope, offering a pathway to homologous eruptions.
△ Less
Submitted 2 September, 2016;
originally announced September 2016.
-
Structure, Stability, and Evolution of Magnetic Flux Ropes from the Perspective of Magnetic Twist
Authors:
Rui Liu,
Bernhard Kliem,
Viacheslav S. Titov,
Jun Chen,
Yuming Wang,
Haimin Wang,
Chang Liu,
Yan Xu,
Thomas Wiegelmann
Abstract:
We investigate the evolution of NOAA Active Region 11817 during 2013 August 10--12, when it developed a complex field configuration and produced four confined, followed by two eruptive, flares. These C-and-above flares are all associated with a magnetic flux rope (MFR) located along the major polarity inversion line, where shearing and converging photospheric flows are present. Aided by the nonlin…
▽ More
We investigate the evolution of NOAA Active Region 11817 during 2013 August 10--12, when it developed a complex field configuration and produced four confined, followed by two eruptive, flares. These C-and-above flares are all associated with a magnetic flux rope (MFR) located along the major polarity inversion line, where shearing and converging photospheric flows are present. Aided by the nonlinear force-free field modeling, we identify the MFR through map** magnetic connectivities and computing the twist number $\mathcal{T}_w$ for each individual field line. The MFR is moderately twisted ($|\mathcal{T}_w| < 2$) and has a well-defined boundary of high squashing factor $Q$. We found that the field line with the extremum $|\mathcal{T}_w|$ is a reliable proxy of the rope axis, and that the MFR's peak $|\mathcal{T}_w|$ temporarily increases within half an hour before each flare while it decreases after the flare peak for both confined and eruptive flares. This pre-flare increase in $|\mathcal{T}_w|$ has little effect on the active region's free magnetic energy or any other parameters derived for the whole region, due to its moderate amount and the MFR's relatively small volume, while its decrease after flares is clearly associated with the stepwise decrease in free magnetic energy due to the flare. We suggest that $\mathcal{T}_w$ may serve as a useful parameter in forewarning the onset of eruption, and therefore, the consequent space weather effects. The helical kink instability is identified as the prime candidate onset mechanism for the considered flares.
△ Less
Submitted 23 December, 2015; v1 submitted 8 December, 2015;
originally announced December 2015.
-
Fast magnetic reconnection in the solar chromosphere mediated by the plasmoid instability
Authors:
Lei Ni,
Bernhard Kliem,
Jun Lin,
Ning Wu
Abstract:
Magnetic reconnection in the partially ionized solar chromosphere is studied in 2.5-dimensional magnetohydrodynamic simulations including radiative cooling and ambipolar diffusion. A Harris current sheet with and without a guide field is considered. Characteristic values of the parameters in the middle chromosphere imply a high magnetic Reynolds number of $\sim10^{6}\mbox{--}10^7$ in the present s…
▽ More
Magnetic reconnection in the partially ionized solar chromosphere is studied in 2.5-dimensional magnetohydrodynamic simulations including radiative cooling and ambipolar diffusion. A Harris current sheet with and without a guide field is considered. Characteristic values of the parameters in the middle chromosphere imply a high magnetic Reynolds number of $\sim10^{6}\mbox{--}10^7$ in the present simulations. Fast magnetic reconnection then develops as a consequence of the plasmoid instability without the need to invoke anomalous resistivity enhancements. Multiple levels of the instability are followed as it cascades to smaller scales, which approach the ion inertial length. The reconnection rate, normalized to the asymptotic values of magnetic field and Alfvén velocity in the inflow region, reaches values in the range $\sim0.01\mbox{--}0.03$ throughout the cascading plasmoid formation and for zero as well as for strong guide field. The out-flow velocity reaches $\approx40$~km\,s$^{-1}$. Slow-mode shocks extend from the $X$-points, heating the plasmoids up to $\sim 8\times10^4$~K. In the case of zero guide field, the inclusion of ambipolar diffusion and radiative cooling both cause a rapid thinning of the current sheet (down to $\sim30$~m) and early formation of secondary islands. Both of these processes have very little effect on the plasmoid instability for a strong guide field. The reconnection rates, temperature enhancements, and upward out-flow velocities from the vertical current sheet correspond well to their characteristic values in chromospheric jets.
△ Less
Submitted 23 September, 2015;
originally announced September 2015.
-
The origin of net electric currents in solar active regions
Authors:
K. Dalmasse,
G. Aulanier,
P. Démoulin,
B. Kliem,
T. Török,
E. Pariat
Abstract:
There is a recurring question in solar physics about whether or not electric currents are neutralized in active regions (ARs). This question was recently revisited using three-dimensional (3D) magnetohydrodynamic (MHD) numerical simulations of magnetic flux emergence into the solar atmosphere. Such simulations showed that flux emergence can generate a substantial net current in ARs. Another source…
▽ More
There is a recurring question in solar physics about whether or not electric currents are neutralized in active regions (ARs). This question was recently revisited using three-dimensional (3D) magnetohydrodynamic (MHD) numerical simulations of magnetic flux emergence into the solar atmosphere. Such simulations showed that flux emergence can generate a substantial net current in ARs. Another source of AR currents are photospheric horizontal flows. Our aim is to determine the conditions for the occurrence of net vs. neutralized currents with this second mechanism. Using 3D MHD simulations, we systematically impose line-tied, quasi-static, photospheric twisting and shearing motions to a bipolar potential magnetic field. We find that such flows: (1) produce both {\it direct} and {\it return} currents, (2) induce very weak compression currents - not observed in 2.5D - in the ambient field present in the close vicinity of the current-carrying field, and (3) can generate force-free magnetic fields with a net current. We demonstrate that neutralized currents are in general produced only in the absence of magnetic shear at the photospheric polarity inversion line - a special condition rarely observed. We conclude that, as magnetic flux emergence, photospheric flows can build up net currents in the solar atmosphere, in agreement with recent observations. These results thus provide support for eruption models based on pre-eruption magnetic fields possessing a net coronal current.
△ Less
Submitted 17 July, 2015;
originally announced July 2015.
-
Triggering an eruptive flare by emerging flux in a solar active-region complex
Authors:
Rohan E. Louis,
Bernhard Kliem,
B. Ravindra,
Georgios Chintzoglou
Abstract:
A flare and fast coronal mass ejection originated between solar active regions NOAA 11514 and 11515 on July 1, 2012 in response to flux emergence in front of the leading sunspot of the trailing region 11515. Analyzing the evolution of the photospheric magnetic flux and the coronal structure, we find that the flux emergence triggered the eruption by interaction with overlying flux in a non-standard…
▽ More
A flare and fast coronal mass ejection originated between solar active regions NOAA 11514 and 11515 on July 1, 2012 in response to flux emergence in front of the leading sunspot of the trailing region 11515. Analyzing the evolution of the photospheric magnetic flux and the coronal structure, we find that the flux emergence triggered the eruption by interaction with overlying flux in a non-standard way. The new flux neither had the opposite orientation nor a location near the polarity inversion line, which are favorable for strong reconnection with the arcade flux under which it emerged. Moreover, its flux content remained significantly smaller than that of the arcade (approximately 40 %). However, a loop system rooted in the trailing active region ran in part under the arcade between the active regions, passing over the site of flux emergence. The reconnection with the emerging flux, leading to a series of jet emissions into the loop system, caused a strong but confined rise of the loop system. This lifted the arcade between the two active regions, weakening its downward tension force and thus destabilizing the considerably sheared flux under the arcade. The complex event was also associated with supporting precursor activity in an enhanced network near the active regions, acting on the large-scale overlying flux, and with two simultaneous confined flares within the active regions.
△ Less
Submitted 26 June, 2015;
originally announced June 2015.
-
Slow Rise and Partial Eruption of a Double-Decker Filament. II. Modeling by a Double Flux Rope Equilibrium
Authors:
Bernhard Kliem,
Tibor Török,
Viacheslav S. Titov,
Roberto Lionello,
Jon A. Linker,
Rui Liu,
Chang Liu,
Haimin Wang
Abstract:
Force-free equilibria containing two vertically arranged magnetic flux ropes of like chirality and current direction are considered as a model for split filaments/prominences and filament-sigmoid systems. Such equilibria are constructed analytically through an extension of the methods developed in Titov & Démoulin (1999) and numerically through an evolutionary sequence including shear flows, flux…
▽ More
Force-free equilibria containing two vertically arranged magnetic flux ropes of like chirality and current direction are considered as a model for split filaments/prominences and filament-sigmoid systems. Such equilibria are constructed analytically through an extension of the methods developed in Titov & Démoulin (1999) and numerically through an evolutionary sequence including shear flows, flux emergence, and flux cancellation in the photospheric boundary. It is demonstrated that the analytical equilibria are stable if an external toroidal (shear) field component exceeding a threshold value is included. If this component decreases sufficiently, then both flux ropes turn unstable for conditions typical of solar active regions, with the lower rope typically being unstable first. Either both flux ropes erupt upward, or only the upper rope erupts while the lower rope reconnects with the ambient flux low in the corona and is destroyed. However, for shear field strengths staying somewhat above the threshold value, the configuration also admits evolutions which lead to partial eruptions with only the upper flux rope becoming unstable and the lower one remaining in place. This can be triggered by a transfer of flux and current from the lower to the upper rope, as suggested by the observations of a split filament in Paper~I (Liu et al. 2012). It can also result from tether-cutting reconnection with the ambient flux at the X-type structure between the flux ropes, which similarly influences their stability properties in opposite ways. This is demonstrated for the numerically constructed equilibrium.
△ Less
Submitted 8 July, 2014;
originally announced July 2014.
-
CME development in the corona and interplanetary medium: A multi-wavelength approach
Authors:
M. Pick,
B. Kliem
Abstract:
This review focuses on the so called three-part CMEs which essentially represent the standard picture of a CME eruption. It is shown how the multi-wavelength observations obtained in the last decade, especially those with high cadence, have validated the early models and contributed to their evolution. These observations cover a broad spectral range including the EUV, white-light, and radio domain…
▽ More
This review focuses on the so called three-part CMEs which essentially represent the standard picture of a CME eruption. It is shown how the multi-wavelength observations obtained in the last decade, especially those with high cadence, have validated the early models and contributed to their evolution. These observations cover a broad spectral range including the EUV, white-light, and radio domains.
△ Less
Submitted 8 July, 2014;
originally announced July 2014.
-
Coronal magnetic reconnection driven by CME expansion -- the 2011 June 7 event
Authors:
L. van Driel-Gesztelyi,
D. Baker,
T. Torok,
E. Pariat,
L. M. Green,
D. R. Williams,
J. Carlyle,
G. Valori,
P. Demoulin,
B. Kliem,
D. M. Long,
S. A. Matthews,
J. -M. Malherbe
Abstract:
Coronal mass ejections (CMEs) erupt and expand in a magnetically structured solar corona. Various indirect observational pieces of evidence have shown that the magnetic field of CMEs reconnects with surrounding magnetic fields, forming, e.g., dimming regions distant from the CME source regions. Analyzing Solar Dynamics Observatory (SDO) observations of the eruption from AR 11226 on 2011 June 7, we…
▽ More
Coronal mass ejections (CMEs) erupt and expand in a magnetically structured solar corona. Various indirect observational pieces of evidence have shown that the magnetic field of CMEs reconnects with surrounding magnetic fields, forming, e.g., dimming regions distant from the CME source regions. Analyzing Solar Dynamics Observatory (SDO) observations of the eruption from AR 11226 on 2011 June 7, we present the first direct evidence of coronal magnetic reconnection between the fields of two adjacent ARs during a CME. The observations are presented jointly with a data-constrained numerical simulation, demonstrating the formation/intensification of current sheets along a hyperbolic flux tube (HFT) at the interface between the CME and the neighbouring AR 11227. Reconnection resulted in the formation of new magnetic connections between the erupting magnetic structure from AR 11226 and the neighboring active region AR 11227 about 200 Mm from the eruption site. The onset of reconnection first becomes apparent in the SDO/AIA images when filament plasma, originally contained within the erupting flux rope, is re-directed towards remote areas in AR 11227, tracing the change of large-scale magnetic connectivity. The location of the coronal reconnection region becomes bright and directly observable at SDO/AIA wavelengths, owing to the presence of down-flowing cool, dense (10^{10} cm^{-3}) filament plasma in its vicinity. The high-density plasma around the reconnection region is heated to coronal temperatures, presumably by slow-mode shocks and Coulomb collisions. These results provide the first direct observational evidence that CMEs reconnect with surrounding magnetic structures, leading to a large-scale re-configuration of the coronal magnetic field.
△ Less
Submitted 12 June, 2014;
originally announced June 2014.
-
Formation of a Double-decker Magnetic Flux Rope in the Sigmoidal Solar Active Region 11520
Authors:
X. Cheng,
M. D. Ding,
J. Zhang,
X. D. Sun,
Y. Guo,
Y. M. Wang,
B. Kliem,
Y. Y. Deng
Abstract:
In this paper, we address the formation of a magnetic flux rope (MFR) that erupted on 2012 July 12 and caused a strong geomagnetic storm event on July 15. Through analyzing the long-term evolution of the associated active region observed by the Atmospheric Imaging Assembly and the Helioseismic and Magnetic Imager on board the Solar Dynamics Observatory, it is found that the twisted field of an MFR…
▽ More
In this paper, we address the formation of a magnetic flux rope (MFR) that erupted on 2012 July 12 and caused a strong geomagnetic storm event on July 15. Through analyzing the long-term evolution of the associated active region observed by the Atmospheric Imaging Assembly and the Helioseismic and Magnetic Imager on board the Solar Dynamics Observatory, it is found that the twisted field of an MFR, indicated by a continuous S-shaped sigmoid, is built up from two groups of sheared arcades near the main polarity inversion line half day before the eruption. The temperature within the twisted field and sheared arcades is higher than that of the ambient volume, suggesting that magnetic reconnection most likely works there. The driver behind the reconnection is attributed to shearing and converging motions at magnetic footpoints with velocities in the range of 0.1--0.6 km s$^{-1}$. The rotation of the preceding sunspot also contributes to the MFR buildup. Extrapolated three-dimensional non-linear force-free field structures further reveal the locations of the reconnection to be in a bald-patch region and in a hyperbolic flux tube. About two hours before the eruption, indications for a second MFR in the form of an S-shaped hot channel are seen. It lies above the original MFR that continuously exists and includes a filament. The whole structure thus makes up a stable double-decker MFR system for hours prior to the eruption. Eventually, after entering the domain of instability, the high-lying MFR impulsively erupts to generate a fast coronal mass ejection and X-class flare; while the low-lying MFR remains behind and continuously maintains the sigmoidicity of the active region.
△ Less
Submitted 19 May, 2014;
originally announced May 2014.
-
Catastrophe versus instability for the eruption of a toroidal solar magnetic flux rope
Authors:
B. Kliem,
J. Lin,
T. G. Forbes,
E. R. Priest,
T. Török
Abstract:
The onset of a solar eruption is formulated here as either a magnetic catastrophe or as an instability. Both start with the same equation of force balance governing the underlying equilibria. Using a toroidal flux rope in an external bipolar or quadrupolar field as a model for the current-carrying flux, we demonstrate the occurrence of a fold catastrophe by loss of equilibrium for several represen…
▽ More
The onset of a solar eruption is formulated here as either a magnetic catastrophe or as an instability. Both start with the same equation of force balance governing the underlying equilibria. Using a toroidal flux rope in an external bipolar or quadrupolar field as a model for the current-carrying flux, we demonstrate the occurrence of a fold catastrophe by loss of equilibrium for several representative evolutionary sequences in the stable domain of parameter space. We verify that this catastrophe and the torus instability occur at the same point; they are thus equivalent descriptions for the onset condition of solar eruptions.
△ Less
Submitted 8 July, 2014; v1 submitted 23 April, 2014;
originally announced April 2014.
-
The Evolution of Writhe in Kink-Unstable Flux Ropes and Erupting Filaments
Authors:
Tibor Torok,
Bernhard Kliem,
Mitchell A. Berger,
Mark G. Linton,
Pascal Demoulin,
Lidia van Driel-Gesztelyi
Abstract:
The helical kink instability of a twisted magnetic flux tube has been suggested as a trigger mechanism for solar filament eruptions and coronal mass ejections (CMEs). In order to investigate if estimations of the pre-eruptive twist can be obtained from observations of writhe in such events, we quantitatively analyze the conversion of twist into writhe in the course of the instability, using numeri…
▽ More
The helical kink instability of a twisted magnetic flux tube has been suggested as a trigger mechanism for solar filament eruptions and coronal mass ejections (CMEs). In order to investigate if estimations of the pre-eruptive twist can be obtained from observations of writhe in such events, we quantitatively analyze the conversion of twist into writhe in the course of the instability, using numerical simulations. We consider the line tied, cylindrically symmetric Gold-Hoyle flux rope model and measure the writhe using the formulae by Berger and Prior which express the quantity as a single integral in space. We find that the amount of twist converted into writhe does not simply scale with the initial flux rope twist, but depends mainly on the growth rates of the instability eigenmodes of higher longitudinal order than the basic mode. The saturation levels of the writhe, as well as the shapes of the kinked flux ropes, are very similar for considerable ranges of initial flux rope twists, which essentially precludes estimations of pre-eruptive twist from measurements of writhe. However, our simulations suggest an upper twist limit of $\sim 6π$ for the majority of filaments prior to their eruption.
△ Less
Submitted 6 March, 2014;
originally announced March 2014.
-
Distribution of Electric Currents in Solar Active Regions
Authors:
Tibor Török,
James E. Leake,
Viacheslav S. Titov,
Vasilis Archontis,
Zoran Mikić,
Mark G. Linton,
Kévin Dalmasse,
Guillaume Aulanier,
Bernhard Kliem
Abstract:
There has been a long-lasting debate on the question of whether or not electric currents in solar active regions are neutralized. That is, whether or not the main (or direct) coronal currents connecting the active region polarities are surrounded by shielding (or return) currents of equal total value and opposite direction. Both theory and observations are not yet fully conclusive regarding this q…
▽ More
There has been a long-lasting debate on the question of whether or not electric currents in solar active regions are neutralized. That is, whether or not the main (or direct) coronal currents connecting the active region polarities are surrounded by shielding (or return) currents of equal total value and opposite direction. Both theory and observations are not yet fully conclusive regarding this question, and numerical simulations have, surprisingly, barely been used to address it. Here we quantify the evolution of electric currents during the formation of a bipolar active region by considering a three-dimensional magnetohydrodynamic simulation of the emergence of a sub-photospheric, current-neutralized magnetic flux rope into the solar atmosphere. We find that a strong deviation from current neutralization develops simultaneously with the onset of significant flux emergence into the corona, accompanied by the development of substantial magnetic shear along the active region's polarity inversion line. After the region has formed and flux emergence has ceased, the strong magnetic fields in the region's center are connected solely by direct currents, and the total direct current is several times larger than the total return current. These results suggest that active regions, the main sources of coronal mass ejections and flares, are born with substantial net currents, in agreement with recent observations. Furthermore, they support eruption models that employ pre-eruption magnetic fields containing such currents.
△ Less
Submitted 13 January, 2014;
originally announced January 2014.
-
Observations of flux rope formation prior to coronal mass ejections
Authors:
Lucie M. Green,
Bernhard Kliem
Abstract:
Understanding the magnetic configuration of the source regions of coronal mass ejections (CMEs) is vital in order to determine the trigger and driver of these events. Observations of four CME productive active regions are presented here, which indicate that the pre-eruption magnetic configuration is that of a magnetic flux rope. The flux ropes are formed in the solar atmosphere by the process know…
▽ More
Understanding the magnetic configuration of the source regions of coronal mass ejections (CMEs) is vital in order to determine the trigger and driver of these events. Observations of four CME productive active regions are presented here, which indicate that the pre-eruption magnetic configuration is that of a magnetic flux rope. The flux ropes are formed in the solar atmosphere by the process known as flux cancellation and are stable for several hours before the eruption. The observations also indicate that the magnetic structure that erupts is not the entire flux rope as initially formed, raising the question of whether the flux rope is able to undergo a partial eruption or whether it undergoes a transition in specific flux rope configuration shortly before the CME.
△ Less
Submitted 16 December, 2013;
originally announced December 2013.
-
Sunspot splitting triggering an eruptive flare
Authors:
Rohan E. Louis,
Klaus G. Puschmann,
Bernhard Kliem,
Horst Balthasar,
Carsten Denker
Abstract:
We investigate how the splitting of the leading sunspot and associated flux emergence and cancellation in active region NOAA 11515 caused an eruptive M5.6 flare on 2012 July 2. Our study employs multi-wavelength observations from HMI, AIA and ChroTel. Emerging flux formed a neutral line ahead of the leading sunspot and new satellite spots. The sunspot splitting caused a long-lasting flow toward th…
▽ More
We investigate how the splitting of the leading sunspot and associated flux emergence and cancellation in active region NOAA 11515 caused an eruptive M5.6 flare on 2012 July 2. Our study employs multi-wavelength observations from HMI, AIA and ChroTel. Emerging flux formed a neutral line ahead of the leading sunspot and new satellite spots. The sunspot splitting caused a long-lasting flow toward this neutral line, where a filament formed. Further flux emergence, partly of mixed-polarity, as well as episodes of flux cancellation occurred repeatedly at the neutral line. Following a nearby C-class precursor flare with signs of interaction with the filament, the filament erupted nearly simultaneously with the onset of the M5.6 flare and evolved into a coronal mass ejection. The sunspot stretched without forming a light bridge, splitting unusually fast (within about a day, complete approximately 6 hours after the eruption) in two nearly equal parts. The front part separated strongly from the active region to approach the neighbouring active region where all its coronal magnetic connections were rooted. It also rotated rapidly (by 4.9 degree/hr) and caused significant shear flows at its edge. The eruption resulted from a complex sequence of processes in the (sub-)photosphere and corona. The persistent flows toward the neutral line likely caused the formation of a flux rope which held the filament. These flows and their associated flux cancellation, the emerging flux, and the precursor flare all contributed to the destabilization of the flux rope. We interpret the sunspot splitting as the separation of two flux bundles differently rooted in the convection zone and only temporarily joined in the spot. This explains the rotation as continued rise of the separating flux and implies that at least this part of the sunspot was still connected to its roots deep in the convection zone.
△ Less
Submitted 18 December, 2013; v1 submitted 20 November, 2013;
originally announced November 2013.
-
Magnetohydrodynamic Modeling of the Solar Eruption on 2010 April 8
Authors:
B. Kliem,
Y. N. Su,
A. A. van Ballegooijen,
E. E. DeLuca
Abstract:
The structure of the coronal magnetic field prior to eruptive processes and the conditions for the onset of eruption are important issues that can be addressed through studying the magnetohydrodynamic stability and evolution of nonlinear force-free field (NLFFF) models. This paper uses data-constrained NLFFF models of a solar active region that erupted on 2010 April 8 as initial condition in MHD s…
▽ More
The structure of the coronal magnetic field prior to eruptive processes and the conditions for the onset of eruption are important issues that can be addressed through studying the magnetohydrodynamic stability and evolution of nonlinear force-free field (NLFFF) models. This paper uses data-constrained NLFFF models of a solar active region that erupted on 2010 April 8 as initial condition in MHD simulations. These models, constructed with the techniques of flux rope insertion and magnetofrictional relaxation, include a stable, an approximately marginally stable, and an unstable configuration. The simulations confirm previous related results of magnetofrictional relaxation runs, in particular that stable flux rope equilibria represent key features of the observed pre-eruption coronal structure very well and that there is a limiting value of the axial flux in the rope for the existence of stable NLFFF equilibria. The specific limiting value is located within a tighter range, due to the sharper discrimination between stability and instability by the MHD description. The MHD treatment of the eruptive configuration yields very good agreement with a number of observed features like the strongly inclined initial rise path and the close temporal association between the coronal mass ejection and the onset of flare reconnection. Minor differences occur in the velocity of flare ribbon expansion and in the further evolution of the inclination; these can be eliminated through refined simulations. We suggest that the slingshot effect of horizontally bent flux in the source region of eruptions can contribute significantly to the inclination of the rise direction. Finally, we demonstrate that the onset criterion formulated in terms of a threshold value for the axial flux in the rope corresponds very well to the threshold of the torus instability in the considered active region.
△ Less
Submitted 8 July, 2014; v1 submitted 25 April, 2013;
originally announced April 2013.
-
Slow Rise and Partial Eruption of a Double-Decker Filament. I Observations and Interpretation
Authors:
Rui Liu,
Bernhard Kliem,
Tibor Török,
Chang Liu,
Viacheslav S. Titov,
Roberto Lionello,
Jon A. Linker,
Haimin Wang
Abstract:
We study an active-region dextral filament which was composed of two branches separated in height by about 13 Mm. This "double-decker" configuration sustained for days before the upper branch erupted with a GOES-class M1.0 flare on 2010 August 7. Analyzing this evolution, we obtain the following main results. 1) During hours before the eruption, filament threads within the lower branch were observ…
▽ More
We study an active-region dextral filament which was composed of two branches separated in height by about 13 Mm. This "double-decker" configuration sustained for days before the upper branch erupted with a GOES-class M1.0 flare on 2010 August 7. Analyzing this evolution, we obtain the following main results. 1) During hours before the eruption, filament threads within the lower branch were observed to intermittently brighten up, lift upward, and then merge with the upper branch. The merging process contributed magnetic flux and current to the upper branch, resulting in its quasi-static ascent. 2) This transfer might serve as the key mechanism for the upper branch to lose equilibrium by reaching the limiting flux that can be stably held down by the overlying field or by reaching the threshold of the torus instability. 3) The erupting branch first straightened from a reverse S shape that followed the polarity inversion line and then writhed into a forward S shape. This shows a transfer of left-handed helicity in a sequence of writhe-twist-writhe. The fact that the initial writhe is converted into the twist of the flux rope excludes the helical kink instability as the trigger process of the eruption, but supports the occurrence of the instability in the main phase, which is indeed indicated by the very strong writhing motion. 4) A hard X-ray sigmoid, likely of coronal origin, formed in the gap between the two original filament branches in the impulsive phase of the associated flare. This supports a model of transient sigmoids forming in the vertical flare current sheet. 5) Left-handed magnetic helicity is inferred for both branches of the dextral filament. 6) Two types of force-free magnetic configurations are compatible with the data, a double flux rope equilibrium and a single flux rope situated above a loop arcade.
△ Less
Submitted 14 August, 2012; v1 submitted 7 July, 2012;
originally announced July 2012.
-
A Parametric Study of Erupting Flux Rope Rotation. Modeling the "Cartwheel CME" on 9 April 2008
Authors:
B. Kliem,
T. Török,
W. T. Thompson
Abstract:
The rotation of erupting filaments in the solar corona is addressed through a parametric simulation study of unstable, rotating flux ropes in bipolar force-free initial equilibrium. The Lorentz force due to the external shear field component and the relaxation of tension in the twisted field are the major contributors to the rotation in this model, while reconnection with the ambient field is of m…
▽ More
The rotation of erupting filaments in the solar corona is addressed through a parametric simulation study of unstable, rotating flux ropes in bipolar force-free initial equilibrium. The Lorentz force due to the external shear field component and the relaxation of tension in the twisted field are the major contributors to the rotation in this model, while reconnection with the ambient field is of minor importance. Both major mechanisms writhe the flux rope axis, converting part of the initial twist helicity, and produce rotation profiles which, to a large part, are very similar in a range of shear-twist combinations. A difference lies in the tendency of twist-driven rotation to saturate at lower heights than shear-driven rotation. For parameters characteristic of the source regions of erupting filaments and coronal mass ejections, the shear field is found to be the dominant origin of rotations in the corona and to be required if the rotation reaches angles of order 90 degrees and higher; it dominates even if the twist exceeds the threshold of the helical kink instability. The contributions by shear and twist to the total rotation can be disentangled in the analysis of observations if the rotation and rise profiles are simultaneously compared with model calculations. The resulting twist estimate allows one to judge whether the helical kink instability occurred. This is demonstrated for the erupting prominence in the "Cartwheel CME" on 9 April 2008, which has shown a rotation of \approx 115 degrees up to a height of 1.5 R_sun above the photosphere. Out of a range of initial equilibria which include strongly kink-unstable (twist Phi=5pi), weakly kink-unstable (Phi=3.5pi), and kink-stable (Phi=2.5pi) configurations, only the evolution of the weakly kink-unstable flux rope matches the observations in their entirety.
△ Less
Submitted 14 December, 2011;
originally announced December 2011.
-
3D Reconstruction of a Rotating Erupting Prominence
Authors:
W. T. Thompson,
B. Kliem,
T. Török
Abstract:
A bright prominence associated with a coronal mass ejection (CME) was seen erupting from the Sun on 9 April 2008. This prominence was tracked by both the Solar Terrestrial Relations Observatory (STEREO) EUVI and COR1 telescopes, and was seen to rotate about the line of sight as it erupted; therefore, the event has been nicknamed the "Cartwheel CME." The threads of the prominence in the core of the…
▽ More
A bright prominence associated with a coronal mass ejection (CME) was seen erupting from the Sun on 9 April 2008. This prominence was tracked by both the Solar Terrestrial Relations Observatory (STEREO) EUVI and COR1 telescopes, and was seen to rotate about the line of sight as it erupted; therefore, the event has been nicknamed the "Cartwheel CME." The threads of the prominence in the core of the CME quite clearly indicate the structure of a weakly to moderately twisted flux rope throughout the field of view, up to heliocentric heights of 4 solar radii. Although the STEREO separation was 48 degrees, it was possible to match some sharp features in the later part of the eruption as seen in the 304 Å line in EUVI and in the Hα-sensitive bandpass of COR1 by both STEREO Ahead and Behind. These features could then be traced out in three-dimensional space, and reprojected into a view in which the eruption is directed towards the observer. The reconstructed view shows that the alignment of the prominence to the vertical axis rotates as it rises up to a leading-edge height of \approx 2.5 solar radii, and then remains approximately constant. The alignment at 2.5 solar radii differs by about 115 degrees from the original filament orientation inferred from Hα and EUV data, and the height profile of the rotation, obtained here for the first time, shows that two thirds of the total rotation is reached within \approx 0.5 solar radii above the photosphere. These features are well reproduced by numerical simulations of an unstable moderately twisted flux rope embedded in external flux with a relatively strong shear field component.
△ Less
Submitted 14 December, 2011;
originally announced December 2011.
-
LEMUR: Large European Module for solar Ultraviolet Research. European contribution to JAXA's Solar-C mission
Authors:
Luca Teriaca,
Vincenzo Andretta,
Frédéric Auchère,
Charles M. Brown,
Eric Buchlin,
Gianna Cauzzi,
J. Len Culhane,
Werner Curdt,
Joseph M. Davila,
Giulio Del Zanna,
George A. Doschek,
Silvano Fineschi,
Andrzej Fludra,
Peter T. Gallagher,
Lucie Green,
Louise K. Harra,
Shinsuke Imada,
Davina Innes,
Bernhard Kliem,
Clarence Korendyke,
John T. Mariska,
Valentin Martínez-Pillet,
Susanna Parenti,
Spiros Patsourakos,
Hardi Peter
, et al. (17 additional authors not shown)
Abstract:
Understanding the solar outer atmosphere requires concerted, simultaneous solar observations from the visible to the vacuum ultraviolet (VUV) and soft X-rays, at high spatial resolution (between 0.1" and 0.3"), at high temporal resolution (on the order of 10 s, i.e., the time scale of chromospheric dynamics), with a wide temperature coverage (0.01 MK to 20 MK, from the chromosphere to the flaring…
▽ More
Understanding the solar outer atmosphere requires concerted, simultaneous solar observations from the visible to the vacuum ultraviolet (VUV) and soft X-rays, at high spatial resolution (between 0.1" and 0.3"), at high temporal resolution (on the order of 10 s, i.e., the time scale of chromospheric dynamics), with a wide temperature coverage (0.01 MK to 20 MK, from the chromosphere to the flaring corona), and the capability of measuring magnetic fields through spectropolarimetry at visible and near-infrared wavelengths. Simultaneous spectroscopic measurements sampling the entire temperature range are particularly important.
These requirements are fulfilled by the Japanese Solar-C mission (Plan B), composed of a spacecraft in a geosynchronous orbit with a payload providing a significant improvement of imaging and spectropolarimetric capabilities in the UV, visible, and near-infrared with respect to what is available today and foreseen in the near future.
The Large European Module for solar Ultraviolet Research (LEMUR), described in this paper, is a large VUV telescope feeding a scientific payload of high-resolution imaging spectrographs and cameras. LEMUR consists of two major components: a VUV solar telescope with a 30 cm diameter mirror and a focal length of 3.6 m, and a focal-plane package composed of VUV spectrometers covering six carefully chosen wavelength ranges between 17 and 127 nm. The LEMUR slit covers 280" on the Sun with 0.14" per pixel sampling. In addition, LEMUR is capable of measuring mass flows velocities (line shifts) down to 2 km/s or better.
LEMUR has been proposed to ESA as the European contribution to the Solar C mission.
△ Less
Submitted 21 September, 2011; v1 submitted 20 September, 2011;
originally announced September 2011.
-
Helicity transport in a simulated coronal mass ejection
Authors:
B. Kliem,
S. Rust,
N. Seehafer
Abstract:
It has been suggested that coronal mass ejections (CMEs) remove the magnetic helicity of their coronal source region from the Sun. Such removal is often regarded to be necessary due to the hemispheric sign preference of the helicity, which inhibits a simple annihilation by reconnection between volumes of opposite chirality. Here we monitor the relative magnetic helicity contained in the coronal vo…
▽ More
It has been suggested that coronal mass ejections (CMEs) remove the magnetic helicity of their coronal source region from the Sun. Such removal is often regarded to be necessary due to the hemispheric sign preference of the helicity, which inhibits a simple annihilation by reconnection between volumes of opposite chirality. Here we monitor the relative magnetic helicity contained in the coronal volume of a simulated flux rope CME, as well as the upward flux of relative helicity through horizontal planes in the simulation box. The unstable and erupting flux rope carries away only a minor part of the initial relative helicity; the major part remains in the volume. This is a consequence of the requirement that the current through an expanding loop must decrease if the magnetic energy of the configuration is to decrease as the loop rises, to provide the kinetic energy of the CME.
△ Less
Submitted 10 December, 2010;
originally announced December 2010.
-
Photospheric flux cancellation and associated flux rope formation and eruption
Authors:
L. M. Green,
B. Kliem,
A. J. Wallace
Abstract:
We study an evolving bipolar active region that exhibits flux cancellation at the internal polarity inversion line, the formation of a soft X-ray sigmoid along the inversion line and a coronal mass ejection. The evolution of the photospheric magnetic field is described and used to estimate how much flux is reconnected into the flux rope. About one third of the active region flux cancels at the int…
▽ More
We study an evolving bipolar active region that exhibits flux cancellation at the internal polarity inversion line, the formation of a soft X-ray sigmoid along the inversion line and a coronal mass ejection. The evolution of the photospheric magnetic field is described and used to estimate how much flux is reconnected into the flux rope. About one third of the active region flux cancels at the internal polarity inversion line in the 2.5~days leading up to the eruption. In this period, the coronal structure evolves from a weakly to a highly sheared arcade and then to a sigmoid that crosses the inversion line in the inverse direction. These properties suggest that a flux rope has formed prior to the eruption. The amount of cancellation implies that up to 60% of the active region flux could be in the body of the flux rope. We point out that only part of the cancellation contributes to the flux in the rope if the arcade is only weakly sheared, as in the first part of the evolution. This reduces the estimated flux in the rope to $\sim\!30%$ or less of the active region flux. We suggest that the remaining discrepancy between our estimate and the limiting value of $\sim\!10%$ of the active region flux, obtained previously by the flux rope insertion method, results from the incomplete coherence of the flux rope, due to nonuniform cancellation along the polarity inversion line. A hot linear feature is observed in the active region which rises as part of the eruption and then likely traces out field lines close to the axis of the flux rope. The flux cancellation and changing magnetic connections at one end of this feature suggest that the flux rope reaches coherence by reconnection shortly before and early in the impulsive phase of the associated flare. The sigmoid is destroyed in the eruption but reforms within a few hours after a moderate amount of further cancellation has occurred.
△ Less
Submitted 4 November, 2010;
originally announced November 2010.
-
Toward understanding the early stages of an impulsively accelerated coronal mass ejection
Authors:
S. Patsourakos,
A. Vourlidas,
B. Kliem
Abstract:
The expanding magnetic flux in coronal mass ejections (CMEs) often forms a cavity. A spherical model is simultaneously fit to STEREO EUVI and COR1 data of an impulsively accelerated CME on 25 March 2008, which displays a well-defined extreme ultraviolet (EUV) and white-light cavity of nearly circular shape already at low heights ~ 0.2 Rs. The center height h(t) and radial expansion r(t) of the cav…
▽ More
The expanding magnetic flux in coronal mass ejections (CMEs) often forms a cavity. A spherical model is simultaneously fit to STEREO EUVI and COR1 data of an impulsively accelerated CME on 25 March 2008, which displays a well-defined extreme ultraviolet (EUV) and white-light cavity of nearly circular shape already at low heights ~ 0.2 Rs. The center height h(t) and radial expansion r(t) of the cavity are obtained in the whole height range of the main acceleration. We interpret them as the axis height and as a quantity proportional to the minor radius of a flux rope, respectively. The three-dimensional expansion of the CME exhibits two phases in the course of its main upward acceleration. From the first h and r data points, taken shortly after the onset of the main acceleration, the erupting flux shows an overexpansion compared to its rise, as expressed by the decrease of the aspect ratio from k=h/r ~ 3 to k ~ (1.5-2.0). This phase is approximately coincident with the impulsive rise of the acceleration and is followed by a phase of very gradual change of the aspect ratio (a nearly self-similar expansion) toward k ~ 1.5 at h ~ 10 Rs. The initial overexpansion of the CME cavity can be caused by flux conservation around a rising flux rope of decreasing axial current and by the addition of flux to a growing, or even newly forming,flux rope by magnetic reconnection. Further analysis will be required to decide which of these contributions is dominant. The data also suggest that the horizontal component of the impulsive cavity expansion (parallel to the solar surface) triggers the associated EUV wave, which subsequently detaches from the CME volume.
△ Less
Submitted 6 August, 2010;
originally announced August 2010.
-
Reconnection of a kinking flux rope triggering the ejection of a microwave and hard X-ray source. II. Numerical Modeling
Authors:
B. Kliem,
M. G. Linton,
T. Török,
M. Karlický
Abstract:
Numerical simulations of the helical ($m\!=\!1$) kink instability of an arched, line-tied flux rope demonstrate that the helical deformation enforces reconnection between the legs of the rope if modes with two helical turns are dominant as a result of high initial twist in the range $Φ\gtrsim6π$. Such reconnection is complex, involving also the ambient field. In addition to breaking up the origina…
▽ More
Numerical simulations of the helical ($m\!=\!1$) kink instability of an arched, line-tied flux rope demonstrate that the helical deformation enforces reconnection between the legs of the rope if modes with two helical turns are dominant as a result of high initial twist in the range $Φ\gtrsim6π$. Such reconnection is complex, involving also the ambient field. In addition to breaking up the original rope, it can form a new, low-lying, less twisted flux rope. The new flux rope is pushed downward by the reconnection outflow, which typically forces it to break as well by reconnecting with the ambient field. The top part of the original rope, largely rooted in the sources of the ambient flux after the break-up, can fully erupt or be halted at low heights, producing a "failed eruption." The helical current sheet associated with the instability is squeezed between the approaching legs, temporarily forming a double current sheet. The leg-leg reconnection proceeds at a high rate, producing sufficiently strong electric fields that it would be able to accelerate particles. It may also form plasmoids, or plasmoid-like structures, which trap energetic particles and propagate out of the reconnection region up to the top of the erupting flux rope along the helical current sheet. The kinking of a highly twisted flux rope involving leg-leg reconnection can explain key features of an eruptive but partially occulted solar flare on 18 April 2001, which ejected a relatively compact hard X-ray and microwave source and was associated with a fast coronal mass ejection.
△ Less
Submitted 13 July, 2010;
originally announced July 2010.
-
Reconnection of a kinking flux rope triggering the ejection of a microwave and hard X-ray source. I. Observations and Interpretation
Authors:
M. Karlický,
B. Kliem
Abstract:
Imaging microwave observations of an eruptive, partially occulted solar flare on 18 April 2001 suggest that the global structure of the event can be described by the helical kink instability of a twisted magnetic flux rope. This model is suggested by the inverse gamma shape of the source exhibiting crossing legs of a rising flux loop and by evidence that the legs interact at or near the crossing p…
▽ More
Imaging microwave observations of an eruptive, partially occulted solar flare on 18 April 2001 suggest that the global structure of the event can be described by the helical kink instability of a twisted magnetic flux rope. This model is suggested by the inverse gamma shape of the source exhibiting crossing legs of a rising flux loop and by evidence that the legs interact at or near the crossing point. The interaction is reflected by the location of peak brightness near the crossing point and by the formation of superimposed compact nonthermal sources most likely at or near the crossing point. These sources propagate upward along both legs, merge into a single, bright source at the top of the structure, and continue to rise at a velocity $>\!1000$~km\,s$^{-1}$. The compact sources trap accelerated electrons which radiate in the radio and hard X-ray ranges. This suggests that they are plasmoids, although their internal structure is not revealed by the data. They exhibit variations of the radio brightness temperature at a characteristic time scale of $\sim\!40$~s, anti-correlated to their area, which also support their interpretation as plasmoids. Their propagation path differs from the standard scenario of plasmoid formation and propagation in the flare current sheet, suggesting the helical current sheet formed by the instability instead.
△ Less
Submitted 13 July, 2010;
originally announced July 2010.
-
Testing magnetofrictional extrapolation with the Titov-Démoulin model of solar active regions
Authors:
G. Valori,
B. Kliem,
T. Török,
V. S. Titov
Abstract:
We examine the nonlinear magnetofrictional extrapolation scheme using the solar active region model by Titov and Démoulin as test field. This model consists of an arched, line-tied current channel held in force-free equilibrium by the potential field of a bipolar flux distribution in the bottom boundary. A modified version, having a parabolic current density profile, is employed here. We find that…
▽ More
We examine the nonlinear magnetofrictional extrapolation scheme using the solar active region model by Titov and Démoulin as test field. This model consists of an arched, line-tied current channel held in force-free equilibrium by the potential field of a bipolar flux distribution in the bottom boundary. A modified version, having a parabolic current density profile, is employed here. We find that the equilibrium is reconstructed with very high accuracy in a representative range of parameter space, using only the vector field in the bottom boundary as input. Structural features formed in the interface between the flux rope and the surrounding arcade-"hyperbolic flux tube" and "bald patch separatrix surface"-are reliably reproduced, as are the flux rope twist and the energy and helicity of the configuration. This demonstrates that force-free fields containing these basic structural elements of solar active regions can be obtained by extrapolation. The influence of the chosen initial condition on the accuracy of reconstruction is also addressed, confirming that the initial field that best matches the external potential field of the model quite naturally leads to the best reconstruction. Extrapolating the magnetogram of a Titov-Démoulin equilibrium in the unstable range of parameter space yields a sequence of two opposing evolutionary phases which clearly indicate the unstable nature of the configuration: a partial buildup of the flux rope with rising free energy is followed by destruction of the rope, losing most of the free energy.
△ Less
Submitted 3 May, 2010;
originally announced May 2010.
-
The writhe of helical structures in the solar corona
Authors:
Tibor Toeroek,
Mitchell A. Berger,
Bernhard Kliem
Abstract:
Helicity is a fundamental property of magnetic fields, conserved in ideal MHD. In flux rope topology, it consists of twist and writhe helicity. Despite the common occurrence of helical structures in the solar atmosphere, little is known about how their shape relates to the writhe, which fraction of helicity is contained in writhe, and how much helicity is exchanged between twist and writhe when th…
▽ More
Helicity is a fundamental property of magnetic fields, conserved in ideal MHD. In flux rope topology, it consists of twist and writhe helicity. Despite the common occurrence of helical structures in the solar atmosphere, little is known about how their shape relates to the writhe, which fraction of helicity is contained in writhe, and how much helicity is exchanged between twist and writhe when they erupt. Here we perform a quantitative investigation of these questions relevant for coronal flux ropes. The decomposition of the writhe of a curve into local and nonlocal components greatly facilitates its computation. We use it to study the relation between writhe and projected S shape of helical curves and to measure writhe and twist in numerical simulations of flux rope instabilities. The results are discussed with regard to filament eruptions and coronal mass ejections (CMEs). We conclude that the writhe is useful in interpreting S shaped coronal structures and in constraining models of eruptions.
△ Less
Submitted 22 April, 2010;
originally announced April 2010.
-
Evidence For Mixed Helicity in Erupting Filaments
Authors:
K. Muglach,
Y. -M. Wang,
B. Kliem
Abstract:
Erupting filaments are sometimes observed to undergo a rotation about the vertical direction as they rise. This rotation of the filament axis is generally interpreted as a conversion of twist into writhe in a kink-unstable magnetic flux rope. Consistent with this interpretation, the rotation is usually found to be clockwise (as viewed from above) if the post-eruption arcade has right-handed heli…
▽ More
Erupting filaments are sometimes observed to undergo a rotation about the vertical direction as they rise. This rotation of the filament axis is generally interpreted as a conversion of twist into writhe in a kink-unstable magnetic flux rope. Consistent with this interpretation, the rotation is usually found to be clockwise (as viewed from above) if the post-eruption arcade has right-handed helicity, but counterclockwise if it has left-handed helicity. Here, we describe two non--active-region filament events recorded with the Extreme-Ultraviolet Imaging Telescope (EIT) on the {\it Solar and Heliospheric Observatory} ({\it SOHO}), in which the sense of rotation appears to be opposite to that expected from the helicity of the post-event arcade. Based on these observations, we suggest that the rotation of the filament axis is in general determined by the net helicity of the erupting system, and that the axially aligned core of the filament can have the opposite helicity sign to the surrounding field. In most cases, the surrounding field provides the main contribution to the net helicity. In the events reported here, however, the helicity associated with the filament ``barbs'' is opposite in sign to and dominates that of the overlying arcade.
△ Less
Submitted 25 July, 2009;
originally announced July 2009.
-
Flux Rope Formation Preceding Coronal Mass Ejection Onset
Authors:
L. M. Green,
B. Kliem
Abstract:
We analyse the evolution of a sigmoidal (S shaped) active region toward eruption, which includes a coronal mass ejection (CME) but leaves part of the filament in place. The X-ray sigmoid is found to trace out three different magnetic topologies in succession: a highly sheared arcade of coronal loops in its long-lived phase, a bald-patch separatrix surface (BPSS) in the hours before the CME, and…
▽ More
We analyse the evolution of a sigmoidal (S shaped) active region toward eruption, which includes a coronal mass ejection (CME) but leaves part of the filament in place. The X-ray sigmoid is found to trace out three different magnetic topologies in succession: a highly sheared arcade of coronal loops in its long-lived phase, a bald-patch separatrix surface (BPSS) in the hours before the CME, and the first flare loops in its major transient intensity enhancement. The coronal evolution is driven by photospheric changes which involve the convergence and cancellation of flux elements under the sigmoid and filament. The data yield unambiguous evidence for the existence of a BPSS, and hence a flux rope, in the corona prior to the onset of the CME.
△ Less
Submitted 26 June, 2009;
originally announced June 2009.
-
Temperature Tomography of a Coronal Sigmoid Supporting the Gradual Formation of a Flux Rope
Authors:
Durgesh Tripathi,
Bernhard Kliem,
Helen E. Mason,
Peter Young,
Lucie M. Green
Abstract:
Multi-wavelength observations of a sigmoidal (S-shaped) solar coronal source by the EUV Imaging Spectrometer and the X-ray Telescope aboard the Hinode spacecraft and by the EUV Imager aboard STEREO are reported. The data reveal the coexistence of a pair of J-shaped hot arcs at temperatures T>2 MK with an S-shaped structure at somewhat lower temperatures T~1.3 MK. The middle section of the S-shap…
▽ More
Multi-wavelength observations of a sigmoidal (S-shaped) solar coronal source by the EUV Imaging Spectrometer and the X-ray Telescope aboard the Hinode spacecraft and by the EUV Imager aboard STEREO are reported. The data reveal the coexistence of a pair of J-shaped hot arcs at temperatures T>2 MK with an S-shaped structure at somewhat lower temperatures T~1.3 MK. The middle section of the S-shaped structure runs along the polarity inversion line of the photospheric field, bridging the gap between the arcs. Flux cancellation occurs at the same location in the photosphere. The sigmoid forms in the gradual decay phase of the active region, which does not experience an eruption. These findings correspond to the expected signatures of a flux rope forming, or being augmented, gradually by a topology transformation inside a magnetic arcade. In such a transformation, the plasma on newly formed helical field lines in the outer flux shell of the rope (S-shaped in projection) is expected to enter a cooling phase once the reconnection of their parent field line pairs (double-J shaped in projection) is complete. Thus, the data support the conjecture that flux ropes can exist in the corona prior to eruptive activity.
△ Less
Submitted 30 April, 2009;
originally announced April 2009.
-
Observations and modeling of the early acceleration phase of erupting filaments involved in coronal mass ejections
Authors:
C. J. Schrijver,
C. Elmore,
B. Kliem,
T. Toeroek,
A. M. Title
Abstract:
We examine the early phases of two near-limb filament destabilization involved in coronal mass ejections on 16 June and 27 July 2005, using high-resolution, high-cadence observations made with the Transition Region and Coronal Explorer (TRACE), complemented by coronagraphic observations by Mauna Loa and the SOlar and Heliospheric Observatory (SOHO). The filaments' heights above the solar limb in…
▽ More
We examine the early phases of two near-limb filament destabilization involved in coronal mass ejections on 16 June and 27 July 2005, using high-resolution, high-cadence observations made with the Transition Region and Coronal Explorer (TRACE), complemented by coronagraphic observations by Mauna Loa and the SOlar and Heliospheric Observatory (SOHO). The filaments' heights above the solar limb in their rapid-acceleration phases are best characterized by a height dependence h(t) ~ t^m with m near, or slightly above, 3 for both events. Such profiles are incompatible with published results for breakout, MHD-instability, and catastrophe models. We show numerical simulations of the torus instability that approximate this height evolution in case a substantial initial velocity perturbation is applied to the develo** instability. We argue that the sensitivity of magnetic instabilities to initial and boundary conditions requires higher fidelity modeling of all proposed mechanisms if observations of rise profiles are to be used to differentiate between them. The observations show no significant delays between the motions of the filament and of overlying loops: the filaments seem to move as part of the overall coronal field until several minutes after the onset of the rapid-acceleration phase.
△ Less
Submitted 8 October, 2007;
originally announced October 2007.
-
Numerical simulations of fast and slow coronal mass ejections
Authors:
T. Toeroek,
B. Kliem
Abstract:
Solar coronal mass ejections (CMEs) show a large variety in their kinematic properties. CMEs originating in active regions and accompanied by strong flares are usually faster and accelerated more impulsively than CMEs associated with filament eruptions outside active regions and weak flares. It has been proposed more than two decades ago that there are two separate types of CMEs, fast (impulsive…
▽ More
Solar coronal mass ejections (CMEs) show a large variety in their kinematic properties. CMEs originating in active regions and accompanied by strong flares are usually faster and accelerated more impulsively than CMEs associated with filament eruptions outside active regions and weak flares. It has been proposed more than two decades ago that there are two separate types of CMEs, fast (impulsive) CMEs and slow (gradual) CMEs. However, this concept may not be valid, since the large data sets acquired in recent years do not show two distinct peaks in the CME velocity distribution and reveal that both fast and slow CMEs can be accompanied by both weak and strong flares. We present numerical simulations which confirm our earlier analytical result that a flux-rope CME model permits describing fast and slow CMEs in a unified manner. We consider a force-free coronal magnetic flux rope embedded in the potential field of model bipolar and quadrupolar active regions. The eruption is driven by the torus instability which occurs if the field overlying the flux rope decreases sufficiently rapidly with height. The acceleration profile depends on the steepness of this field decrease, corresponding to fast CMEs for rapid decrease, as is typical of active regions, and to slow CMEs for gentle decrease, as is typical of the quiet Sun. Complex (quadrupolar) active regions lead to the fastest CMEs.
△ Less
Submitted 11 October, 2007; v1 submitted 15 May, 2007;
originally announced May 2007.
-
Testing non-linear force-free coronal magnetic field extrapolations with the Titov-Demoulin equilibrium
Authors:
Thomas Wiegelmann,
Bernd Inhester,
Bernhard Kliem,
Gherardo Valori,
Thomas Neukirch
Abstract:
CONTEXT: As the coronal magnetic field can usually not be measured directly, it has to be extrapolated from photospheric measurements into the corona. AIMS: We test the quality of a non-linear force-free coronal magnetic field extrapolation code with the help of a known analytical solution. METHODS: The non-linear force-free equations are numerically solved with the help of an optimization princ…
▽ More
CONTEXT: As the coronal magnetic field can usually not be measured directly, it has to be extrapolated from photospheric measurements into the corona. AIMS: We test the quality of a non-linear force-free coronal magnetic field extrapolation code with the help of a known analytical solution. METHODS: The non-linear force-free equations are numerically solved with the help of an optimization principle. The method minimizes an integral over the force-free and solenoidal condition. As boundary condition we use either the magnetic field components on all six sides of the computational box in Case I or only on the bottom boundary in Case II. We check the quality of the reconstruction by computing how well force-freeness and divergence-freeness are fulfilled and by comparing the numerical solution with the analytical solution. The comparison is done with magnetic field line plots and several quantitative measures, like the vector correlation, Cauchy Schwarz, normalized vector error, mean vector error and magnetic energy. RESULTS: For Case I the reconstructed magnetic field shows good agreement with the original magnetic field topology, whereas in Case II there are considerable deviations from the exact solution. This is corroborated by the quantitative measures, which are significantly better for Case I. CONCLUSIONS: Despite the strong nonlinearity of the considered force-free equilibrium, the optimization method of extrapolation is able to reconstruct it; however, the quality of reconstruction depends significantly on the consistency of the input data, which is given only if the known solution is provided also at the lateral and top boundaries, and on the presence or absence of flux concentrations near the boundaries of the magnetogram.
△ Less
Submitted 21 December, 2006;
originally announced December 2006.
-
Torus instability
Authors:
B. Kliem,
T. Toeroek
Abstract:
The expansion instability of a toroidal current ring in low-beta magnetized plasma is investigated. Qualitative agreement is obtained with experiments on spheromak expansion and with essential properties of solar coronal mass ejections, unifying the two apparently disparate classes of fast and slow coronal mass ejections.
The expansion instability of a toroidal current ring in low-beta magnetized plasma is investigated. Qualitative agreement is obtained with experiments on spheromak expansion and with essential properties of solar coronal mass ejections, unifying the two apparently disparate classes of fast and slow coronal mass ejections.
△ Less
Submitted 4 August, 2006; v1 submitted 24 May, 2006;
originally announced May 2006.