-
Calibration of detector time constant with a thermal source for the POLARBEAR-2A CMB polarization experiment
Authors:
S. Takatori,
M. Hasegawa,
M. Hazumi,
D. Kaneko,
N. Katayama,
A. T. Lee,
S. Takakura,
T. Tomaru,
T. Adkins,
D. Barron,
Y. Chinone,
K. T. Crowley,
T. de Haan,
T. Elleflot,
N. Farias,
C. Feng,
T. Fu**o,
J. C. Groh,
H. Hirose,
F. Matsuda,
H. Nishino,
Y. Segawa,
P. Siritanasak,
A. Suzuki,
K. Yamada
Abstract:
The Simons Array (SA) project is a ground-based Cosmic Microwave Background (CMB) polarization experiment. The SA observes the sky using three telescopes, and POLARBEAR-2A (PB-2A) is the receiver system on the first telescope. For the ground-based experiment, atmospheric fluctuation is the primary noise source that could cause polarization leakage. In the PB-2A receiver system, a continuously rota…
▽ More
The Simons Array (SA) project is a ground-based Cosmic Microwave Background (CMB) polarization experiment. The SA observes the sky using three telescopes, and POLARBEAR-2A (PB-2A) is the receiver system on the first telescope. For the ground-based experiment, atmospheric fluctuation is the primary noise source that could cause polarization leakage. In the PB-2A receiver system, a continuously rotating half-wave plate (HWP) is used to mitigate the polarization leakage. However, due to the rapid modulation of the polarization signal, the uncertainty in the time constant of the detector results in an uncertainty in the polarization angle. For PB-2A, the time constant of each bolometer needs to be calibrated at the sub-millisecond level to avoid introducing bias to the polarization signal. We have developed a new calibrator system that can be used to calibrate the time constants of the detectors. In this study, we present the design of the calibration system and the preliminary results of the time constant calibration for PB-2A.
△ Less
Submitted 25 March, 2024;
originally announced March 2024.
-
Constraints on axion-like polarization oscillations in the cosmic microwave background with POLARBEAR
Authors:
The POLARBEAR Collaboration,
Shunsuke Adachi,
Tylor Adkins,
Kam Arnold,
Carlo Baccigalupi,
Darcy Barron,
Kolen Cheung,
Yuji Chinone,
Kevin T. Crowley,
Josquin Errard,
Giulio Fabbian,
Chang Feng,
Raphael Flauger,
Takuro Fu**o,
Daniel Green,
Masaya Hasegawa,
Masashi Hazumi,
Daisuke Kaneko,
Nobuhiko Katayama,
Brian Keating,
Akito Kusaka,
Adrian T. Lee,
Yuto Minami,
Haruki Nishino,
Christian L. Reichardt
, et al. (7 additional authors not shown)
Abstract:
Very light pseudoscalar fields, often referred to as axions, are compelling dark matter candidates and can potentially be detected through their coupling to the electromagnetic field. Recently a novel detection technique using the cosmic microwave background (CMB) was proposed, which relies on the fact that the axion field oscillates at a frequency equal to its mass in appropriate units, leading t…
▽ More
Very light pseudoscalar fields, often referred to as axions, are compelling dark matter candidates and can potentially be detected through their coupling to the electromagnetic field. Recently a novel detection technique using the cosmic microwave background (CMB) was proposed, which relies on the fact that the axion field oscillates at a frequency equal to its mass in appropriate units, leading to a time-dependent birefringence. For appropriate oscillation periods this allows the axion field at the telescope to be detected via the induced sinusoidal oscillation of the CMB linear polarization. We search for this effect in two years of POLARBEAR data. We do not detect a signal, and place a median $95 \%$ upper limit of $0.65 ^\circ$ on the sinusoid amplitude for oscillation frequencies between $0.02\,\text{days}^{-1}$ and $0.45\,\text{days}^{-1}$, which corresponds to axion masses between $9.6 \times 10^{-22} \, \text{eV}$ and $2.2\times 10^{-20} \,\text{eV}$. Under the assumptions that 1) the axion constitutes all the dark matter and 2) the axion field amplitude is a Rayleigh-distributed stochastic variable, this translates to a limit on the axion-photon coupling $g_{φγ} < 2.4 \times 10^{-11} \,\text{GeV}^{-1} \times ({m_φ}/{10^{-21} \, \text{eV}})$.
△ Less
Submitted 1 September, 2023; v1 submitted 15 March, 2023;
originally announced March 2023.
-
Characterization of a half-wave plate for cosmic microwave background circular polarization measurement with POLARBEAR
Authors:
T. Fu**o,
S. Takakura,
Y. Chinone,
M. Hasegawa,
M. Hazumi,
N. Katayama,
A. T. Lee,
T. Matsumura,
Y. Minami,
H. Nishino
Abstract:
A half-wave plate (HWP) is often used as a modulator to suppress systematic error in the measurements of cosmic microwave background (CMB) polarization. A HWP can also be used to measure circular polarization (CP) through its optical leakage from CP to linear polarization. The CP of the CMB is predicted from various sources, such as interactions in the Universe and extension of the standard model.…
▽ More
A half-wave plate (HWP) is often used as a modulator to suppress systematic error in the measurements of cosmic microwave background (CMB) polarization. A HWP can also be used to measure circular polarization (CP) through its optical leakage from CP to linear polarization. The CP of the CMB is predicted from various sources, such as interactions in the Universe and extension of the standard model. Interaction with supernova remnants of population III stars is one of the brightest CP sources. Thus, the observation of the CP of CMB is a new tool for searching for population III stars. In this paper, we demonstrate the improved measurement of the leakage coefficient using the transmission measurement of an actual HWP in the laboratory. We measured the transmittance of linearly polarized light through the HWP used in \textsc{Polarbear} in the frequency range of \SIrange{120}{160}{GHz}. We evaluate properties of the HWP by fitting the data with a physical model using the Markov Chain Monte Carlo method. We then estimate the band-averaged CP leakage coefficient using the physical model. We find that the leakage coefficient strongly depends on the spectra of CP sources. We thus calculate the maximum fractional leakage coefficient from CP to linear polarization as $0.133 \pm 0.009$ in the Rayleigh--Jeans spectrum. The nonzero value shows that \textsc{Polarbear} has sensitivity to CP. Additionally, because we use the bandpass of detectors installed in the telescope to calculate the band-averaged values, we also consider systematic effects in the experiment.
△ Less
Submitted 28 June, 2023; v1 submitted 5 January, 2023;
originally announced January 2023.
-
Vibration characteristics of a continuously rotating superconducting magnetic bearing and potential influence to TES and SQUID
Authors:
Shinya Sugiyama,
Tommaso Ghigna,
Yurika Hoshino,
Nobuhiko Katayama,
Satoru Katsuda,
Kunimoto Komatsu,
Tomotake Matsumura,
Yuki Sakurai,
Kosuke Sato,
Ryota Takaku,
Makoto Tashiro,
Yukikatsu Terada
Abstract:
We measured the vibration of a prototype superconducting magnetic bearing (SMB) operating at liquid nitrogen temperature. This prototype system was designed as a breadboard model for LiteBIRD low-frequency telescope (LFT) polarization modulator unit. We set an upper limit of the vibration amplitude at $36~\mathrm{μm}$ at the rotational synchronous frequency. During the rotation, the amplitude of t…
▽ More
We measured the vibration of a prototype superconducting magnetic bearing (SMB) operating at liquid nitrogen temperature. This prototype system was designed as a breadboard model for LiteBIRD low-frequency telescope (LFT) polarization modulator unit. We set an upper limit of the vibration amplitude at $36~\mathrm{μm}$ at the rotational synchronous frequency. During the rotation, the amplitude of the magnetic field produced varies. From this setup, we compute the static and AC amplitude of the magnetic fields produced by the SMB magnet at the location of the LFT focal plane as $0.24~\mathrm{G}$ and $3\times10^{-5}$$~\mathrm{G}$, respectively. From the AC amplitude, we compute TES critical temperature variation of $7\times10^{-8}$$~\mathrm{K}$ and fractional change of the SQUID flux is $δΦ/Φ_0|_{ac}=3.1\times10^{-5}$. The mechanical vibration can be also estimated to be $3.6\times 10^{-2}$$~\mathrm{N}$ at the rotation mechanism location.
△ Less
Submitted 21 October, 2022;
originally announced October 2022.
-
The POLARBEAR-2 and Simons Array Focal Plane Fabrication Status
Authors:
B. Westbrook,
P. A. R. Ade,
M. Aguilar,
Y. Akiba,
K. Arnold,
C. Baccigalupi,
D. Barron,
D. Beck,
S. Beckman,
A. N. Bender,
F. Bianchini,
D. Boettger,
J. Borrill,
S. Chapman,
Y. Chinone,
G. Coppi,
K. Crowley,
A. Cukierman,
T. de,
R. Dünner,
M. Dobbs,
T. Elleflot,
J. Errard,
G. Fabbian,
S. M. Feeney
, et al. (68 additional authors not shown)
Abstract:
We present on the status of POLARBEAR-2 A (PB2-A) focal plane fabrication. The PB2-A is the first of three telescopes in the Simon Array (SA), which is an array of three cosmic microwave background (CMB) polarization sensitive telescopes located at the POLARBEAR (PB) site in Northern Chile. As the successor to the PB experiment, each telescope and receiver combination is named as PB2-A, PB2-B, and…
▽ More
We present on the status of POLARBEAR-2 A (PB2-A) focal plane fabrication. The PB2-A is the first of three telescopes in the Simon Array (SA), which is an array of three cosmic microwave background (CMB) polarization sensitive telescopes located at the POLARBEAR (PB) site in Northern Chile. As the successor to the PB experiment, each telescope and receiver combination is named as PB2-A, PB2-B, and PB2-C. PB2-A and -B will have nearly identical receivers operating at 90 and 150 GHz while PB2-C will house a receiver operating at 220 and 270 GHz. Each receiver contains a focal plane consisting of seven close-hex packed lenslet coupled sinuous antenna transition edge sensor bolometer arrays. Each array contains 271 di-chroic optical pixels each of which have four TES bolometers for a total of 7588 detectors per receiver. We have produced a set of two types of candidate arrays for PB2-A. The first we call Version 11 (V11) and uses a silicon oxide (SiOx) for the transmission lines and cross-over process for orthogonal polarizations. The second we call Version 13 (V13) and uses silicon nitride (SiNx) for the transmission lines and cross-under process for orthogonal polarizations. We have produced enough of each type of array to fully populate the focal plane of the PB2-A receiver. The average wirebond yield for V11 and V13 arrays is 93.2% and 95.6% respectively. The V11 arrays had a superconducting transition temperature (Tc) of 452 +/- 15 mK, a normal resistance (Rn) of 1.25 +/- 0.20 Ohms, and saturations powers of 5.2 +/- 1.0 pW and 13 +/- 1.2 pW for the 90 and 150 GHz bands respectively. The V13 arrays had a superconducting transition temperature (Tc) of 456 +/-6 mK, a normal resistance (Rn) of 1.1 +/- 0.2 Ohms, and saturations powers of 10.8 +/- 1.8 pW and 22.9 +/- 2.6 pW for the 90 and 150 GHz bands respectively.
△ Less
Submitted 8 October, 2022;
originally announced October 2022.
-
Testbed preparation of a small prototype polarization modulator for LiteBIRD low-frequency telescope
Authors:
Thuong D. Hoang,
Tomotake Matsumura,
Ryota Takaku,
Takashi Hasebe,
Tommaso Ghigna,
Nobuhiko Katayama,
Yuki Sakurai,
Kunimoto Komatsu,
Teruhito Iida,
Yurika Hoshino,
Shinya Sugiyama,
Hirokazu Ishino
Abstract:
LiteBIRD is the Cosmic Microwave Background (CMB) radiation polarization satellite mission led by ISAS/JAXA. The main scientific goal is to search for primordial gravitational wave signals generated from the inflation epoch of the Universe. LiteBIRD telescopes employ polarization modulation units (PMU) using continuously rotating half-wave plates (HWP). The PMU is a crucial component to reach unpr…
▽ More
LiteBIRD is the Cosmic Microwave Background (CMB) radiation polarization satellite mission led by ISAS/JAXA. The main scientific goal is to search for primordial gravitational wave signals generated from the inflation epoch of the Universe. LiteBIRD telescopes employ polarization modulation units (PMU) using continuously rotating half-wave plates (HWP). The PMU is a crucial component to reach unprecedented sensitivity by mitigating systematic effects, including 1/f noise. We have developed a 1/10 scale prototype PMU of the LiteBIRD LFT, which has a 5-layer achromatic HWP and a diameter of 50 mm, spanning the observational frequency range of 34-161 GHz. The HWP is mounted on a superconducting magnetic bearing (SMB) as a rotor and levitated by a high-temperature superconductor as a stator. In this study, the entire PMU system is cooled down to 10 K in the cryostat chamber by a 4-K Gifford-McMahon (GM) cooler. We propagate an incident coherent millimeter-wave polarized signal throughout the rotating HWP and detect the modulated signal. We study the modulated optical signal and any rotational synchronous signals from the rotation mechanism. We describe the testbed system and the preliminary data acquired from this setup. This testbed is built to integrate the broadband HWP PMU and evaluate the potential systematic effects in the optical data. This way, we can plan with a full-scale model, which takes a long time for preparation and testing.
△ Less
Submitted 7 August, 2022;
originally announced August 2022.
-
Modelling TES non-linearity induced by a rotating HWP in a CMB polarimeter
Authors:
Tommaso Ghigna,
Tomotake Matsumura,
Yuki Sakurai,
Ryota Takaku,
Kunimoto Komatsu,
Shinya Sugiyama,
Yurika Hoshino,
Nobuhiko Katayama
Abstract:
Most upcoming CMB experiments are planning to deploy between a few thousand and a few hundred thousand TES bolometers in order to drastically increase sensitivity and unveil the B-mode signal. Differential systematic effects and $1/f$ noise are two of the challenges that need to be overcome in order to achieve this result. In recent years, rotating Half-Wave Plates have become increasingly more po…
▽ More
Most upcoming CMB experiments are planning to deploy between a few thousand and a few hundred thousand TES bolometers in order to drastically increase sensitivity and unveil the B-mode signal. Differential systematic effects and $1/f$ noise are two of the challenges that need to be overcome in order to achieve this result. In recent years, rotating Half-Wave Plates have become increasingly more popular as a solution to mitigate these effects, especially for those experiments that are targeting the largest angular scales. However, other effects may appear when a rotating HWP is being employed. In this paper we focus on HWP synchronous signals, which are due to intensity to polarization leakage induced by a rotating cryogenic multi-layer sapphire HWP employed as the first optical element of the telescope system. We use LiteBIRD LFT as a case study and we analyze the interaction between these spurious signals and TES bolometers, to determine whether this signal can contaminate the bolometer response. We present the results of simulations for a few different TES model assumptions and different spurious signal amplitudes. Modelling these effects is fundamental to find what leakage level can be tolerated and minimize non-linearity effects of the bolometer response.
△ Less
Submitted 4 August, 2022;
originally announced August 2022.
-
Testing magnetic interference between TES detectors and the telescope environment for future CMB satellite missions
Authors:
Tommaso Ghigna,
Thuong Duc Hoang,
Takashi Hasebe,
Yurika Hoshino,
Nobuhiko Katayama,
Kunimoto Komatsu,
Adrian Lee,
Tomotake Matsumura,
Yuki Sakurai,
Shinya Sugiyama,
Aritoki Suzuki,
Christopher Raum,
Ryota Takaku,
Benjamin Westbrook
Abstract:
The two most common components of several upcoming CMB experiments are large arrays of superconductive TES (Transition-Edge Sensor) detectors and polarization modulator units, e.g. continuously-rotating Half-Wave Plates (HWP). A high detector count is necessary to increase the instrument raw sensitivity, however past experiments have shown that systematic effects are becoming one of the main limit…
▽ More
The two most common components of several upcoming CMB experiments are large arrays of superconductive TES (Transition-Edge Sensor) detectors and polarization modulator units, e.g. continuously-rotating Half-Wave Plates (HWP). A high detector count is necessary to increase the instrument raw sensitivity, however past experiments have shown that systematic effects are becoming one of the main limiting factors to reach the sensitivity required to detect primordial $B$-modes. Therefore, polarization modulators have become popular in recent years to mitigate several systematic effects. Polarization modulators based on HWP technologies require a rotating mechanism to spin the plate and modulate the incoming polarized signal. In order to minimize heat dissipation from the rotating mechanism, which is a stringent requirement particularly for a space mission like $LiteBIRD$, we can employ a superconductive magnetic bearing to levitate the rotor and achieve contactless rotation. A disadvantage of this technique is the associated magnetic fields generated by those systems. In this paper we investigate the effects on a TES detector prototype and find no detectable $T_c$ variations due to an applied constant (DC) magnetic field, and a non-zero TES response to varying (AC) magnetic fields. We quantify a worst-case TES responsivity to the applied AC magnetic field of $\sim10^5$ pA/G, and give a preliminary interpretation of the pick-up mechanism.
△ Less
Submitted 28 July, 2022; v1 submitted 27 July, 2022;
originally announced July 2022.
-
High-precision temperature monitoring system for room-temperature equipment in astrophysical observations
Authors:
Daiki Tanabe,
Masaya Hasegawa,
Masashi Hazumi,
Nobuhiko Katayama,
Shuhei Kikuchi,
Adrian Lee,
Haruki Nishino,
Satoru Takakura
Abstract:
We present a precise thermometry system to monitor room-temperature components of a telescope for radio-astronomy such as cosmic microwave background (CMB) observation. The system realizes precision of 1 mK${\rm \sqrt{s}}$ on a timescale of 20 seconds at 300 K. We achieved this high precision by tracking only relative fluctuation and combining thermistors with a low-noise measurement device. We sh…
▽ More
We present a precise thermometry system to monitor room-temperature components of a telescope for radio-astronomy such as cosmic microwave background (CMB) observation. The system realizes precision of 1 mK${\rm \sqrt{s}}$ on a timescale of 20 seconds at 300 K. We achieved this high precision by tracking only relative fluctuation and combining thermistors with a low-noise measurement device. We show the required precision of temperature monitors for CMB observation and introduce the performance of our thermometry system. This precise room-temperature monitoring system enables us to reduce the low-frequency noise in a wide range of radio-astronomical detector signals observation and to operate a large detector array perform at its designed high sensitivity.
△ Less
Submitted 2 October, 2022; v1 submitted 23 May, 2022;
originally announced May 2022.
-
Snowmass 2021 CMB-S4 White Paper
Authors:
Kevork Abazajian,
Arwa Abdulghafour,
Graeme E. Addison,
Peter Adshead,
Zeeshan Ahmed,
Marco Ajello,
Daniel Akerib,
Steven W. Allen,
David Alonso,
Marcelo Alvarez,
Mustafa A. Amin,
Mandana Amiri,
Adam Anderson,
Behzad Ansarinejad,
Melanie Archipley,
Kam S. Arnold,
Matt Ashby,
Han Aung,
Carlo Baccigalupi,
Carina Baker,
Abhishek Bakshi,
Debbie Bard,
Denis Barkats,
Darcy Barron,
Peter S. Barry
, et al. (331 additional authors not shown)
Abstract:
This Snowmass 2021 White Paper describes the Cosmic Microwave Background Stage 4 project CMB-S4, which is designed to cross critical thresholds in our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. We provide an overview of the science case, the technical design, and project plan.
This Snowmass 2021 White Paper describes the Cosmic Microwave Background Stage 4 project CMB-S4, which is designed to cross critical thresholds in our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. We provide an overview of the science case, the technical design, and project plan.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Improved upper limit on degree-scale CMB B-mode polarization power from the 670 square-degree POLARBEAR survey
Authors:
The POLARBEAR Collaboration,
S. Adachi,
T. Adkins,
M. A. O. Aguilar Faúndez,
K. S. Arnold,
C. Baccigalupi,
D. Barron,
S. Chapman,
K. Cheung,
Y. Chinone,
K. T. Crowley,
T. Elleflot,
J. Errard,
G. Fabbian,
C. Feng,
T. Fu**o,
N. Galitzki,
N. W. Halverson,
M. Hasegawa,
M. Hazumi,
H. Hirose,
L. Howe,
J. Ito,
O. Jeong,
D. Kaneko
, et al. (29 additional authors not shown)
Abstract:
We report an improved measurement of the degree-scale cosmic microwave background $B$-mode angular-power spectrum over 670 square-degree sky area at 150 GHz with POLARBEAR. In the original analysis of the data, errors in the angle measurement of the continuously rotating half-wave plate, a polarization modulator, caused significant data loss. By introducing an angle-correction algorithm, the data…
▽ More
We report an improved measurement of the degree-scale cosmic microwave background $B$-mode angular-power spectrum over 670 square-degree sky area at 150 GHz with POLARBEAR. In the original analysis of the data, errors in the angle measurement of the continuously rotating half-wave plate, a polarization modulator, caused significant data loss. By introducing an angle-correction algorithm, the data volume is increased by a factor of 1.8. We report a new analysis using the larger data set. We find the measured $B$-mode spectrum is consistent with the $Λ$CDM model with Galactic dust foregrounds. We estimate the contamination of the foreground by cross-correlating our data and Planck 143, 217, and 353 GHz measurements, where its spectrum is modeled as a power law in angular scale and a modified blackbody in frequency. We place an upper limit on the tensor-to-scalar ratio $r$ < 0.33 at 95% confidence level after marginalizing over the foreground parameters.
△ Less
Submitted 15 June, 2022; v1 submitted 4 March, 2022;
originally announced March 2022.
-
Probing Cosmic Inflation with the LiteBIRD Cosmic Microwave Background Polarization Survey
Authors:
LiteBIRD Collaboration,
E. Allys,
K. Arnold,
J. Aumont,
R. Aurlien,
S. Azzoni,
C. Baccigalupi,
A. J. Banday,
R. Banerji,
R. B. Barreiro,
N. Bartolo,
L. Bautista,
D. Beck,
S. Beckman,
M. Bersanelli,
F. Boulanger,
M. Brilenkov,
M. Bucher,
E. Calabrese,
P. Campeti,
A. Carones,
F. J. Casas,
A. Catalano,
V. Chan,
K. Cheung
, et al. (166 additional authors not shown)
Abstract:
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is…
▽ More
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is planned to orbit the Sun-Earth Lagrangian point L2, where it will map the cosmic microwave background (CMB) polarization over the entire sky for three years, with three telescopes in 15 frequency bands between 34 and 448 GHz, to achieve an unprecedented total sensitivity of 2.2$μ$K-arcmin, with a typical angular resolution of 0.5$^\circ$ at 100 GHz. The primary scientific objective of LiteBIRD is to search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. We provide an overview of the LiteBIRD project, including scientific objectives, mission and system requirements, operation concept, spacecraft and payload module design, expected scientific outcomes, potential design extensions and synergies with other projects.
△ Less
Submitted 27 March, 2023; v1 submitted 6 February, 2022;
originally announced February 2022.
-
Mechanical strength and millimeter-wave transmittance spectrum of stacked sapphire plates bonded by sodium silicate solution
Authors:
Takayuki Toda,
Yuki Sakurai,
Hirokazu Ishino,
Tomotake Matsumura,
Kunimoto Komatsu,
Nobuhiko Katayama
Abstract:
The polarization modulator unit for the low-frequency telescope in LiteBIRD employs an achromatic half-wave plate (AHWP). It consists of five layers of a-cut sapphire plate, which are stacked based on a Pancharatnam recipe. In this way, the retardance of the AHWP is a half-wave over a bandwidth of 34-161 GHz. The diameter of a single sapphire plate is about 500 mm and the thickness is 5 mm. When a…
▽ More
The polarization modulator unit for the low-frequency telescope in LiteBIRD employs an achromatic half-wave plate (AHWP). It consists of five layers of a-cut sapphire plate, which are stacked based on a Pancharatnam recipe. In this way, the retardance of the AHWP is a half-wave over a bandwidth of 34-161 GHz. The diameter of a single sapphire plate is about 500 mm and the thickness is 5 mm. When a large diameter AHWP is used for a space mission, it is important for the AHWP to survive launch vibration. A preliminary study indicates that the five-layer stacked HWP has a risk of breakage at the launch unless the five layers are glued together and mechanically treated as one disk. We report our investigation using a sodium silicate solution that can bond the sapphire plates. This technique has been previously investigated as a candidate of cryogenic bonding for a mirror material, including sapphire, of the gravitational wave experiments: LIGO, VIRGO, and KAGRA. We experimentally studied the mechanical strength of the bonded interface for two different surface conditions: polished and unpolished. We demonstrated that the tensile and shear strength > 20 MPa for samples with a polished surface. This satisfied the requirement of 5.5 MPa derived from the mechanical simulation assuming a launch load of 30G. We identified that samples glued on a polished surface exhibit higher strength than unpolished ones by a factor of 2 for tensile and 18 for shear strength. We measured the millimeter-wave transmittance between 90 and 140 GHz using sapphire plates with a diameter of 50 mm before and after bonding. We did not find any optical effects caused by the bonded interface within 2% error in transmittance, which originates from the measurement system.
△ Less
Submitted 15 October, 2021;
originally announced October 2021.
-
A Large Diameter Millimeter-Wave Low-Pass Filter Made of Alumina with Laser Ablated Anti-Reflection Coating
Authors:
Ryota Takaku,
Qi Wen,
Scott Cray,
Mark Devlin,
Simon Dicker,
Shaul Hanany,
Takashi Hasebe,
Teruhito Iida,
Nobuhiko Katayama,
Kuniaki Konishi,
Makoto Kuwata-Gonokami,
Tomotake Matsumura,
Norikatsu Mio,
Haruyuki Sakurai,
Yuki Sakurai,
Ryohei Yamada,
Junji Yumoto
Abstract:
We fabricated a 302 mm diameter low-pass filter made of alumina that has an anti-reflection coating (ARC) made with laser-ablated sub-wavelength structures (SWS). The filter has been integrated into and is operating with the MUSTANG2 instrument, which is coupled to the Green Bank Telescope. The average transmittance of the filter in the MUSTANG2 operating band between 75 and 105 GHz is 98%. Reflec…
▽ More
We fabricated a 302 mm diameter low-pass filter made of alumina that has an anti-reflection coating (ARC) made with laser-ablated sub-wavelength structures (SWS). The filter has been integrated into and is operating with the MUSTANG2 instrument, which is coupled to the Green Bank Telescope. The average transmittance of the filter in the MUSTANG2 operating band between 75 and 105 GHz is 98%. Reflective loss due to the ARC is 1%. The difference in transmission between the s- and p-polarization states is less than 1%. To within 1% accuracy we observe no variance in these results when transmission is measured in six independent filter spatial locations. The alumina filter replaced a prior MUSTANG2 Teflon filter. Data taken with the filter heat sunk to its nominal 40 K stage show performance consistent with expectations: a reduction of about 50% in filters-induced optical power load on the 300 mK stage, and in in-band optical loading on the detectors. It has taken less than 4 days to laser-ablate the SWS on both sides of the alumina disk. This is the first report of an alumina filter with SWS ARC deployed with an operating instrument, and the first demonstration of a large area fabrication of SWS with laser ablation.
△ Less
Submitted 21 January, 2022; v1 submitted 30 September, 2021;
originally announced September 2021.
-
Design of a frequency-independent optic axis Pancharatnam-based achromatic half-wave plate
Authors:
Kunimoto Komatsu,
Hirokazu Ishino,
Nobuhiko Katayama,
Tomotake Matsumura,
Yuki Sakurai
Abstract:
Pancharatnam-based achromatic half-wave plates (AHWP) achieve high polarization efficiency over a broad waveband. These AWHPs generally contain a property whereby the optic axis is dependent on the electromagnetic frequency of the incident radiation. When the AHWP is used to measure incident polarized radiation with a finite detection bandwidth, this frequency dependence causes an uncertainty in t…
▽ More
Pancharatnam-based achromatic half-wave plates (AHWP) achieve high polarization efficiency over a broad waveband. These AWHPs generally contain a property whereby the optic axis is dependent on the electromagnetic frequency of the incident radiation. When the AHWP is used to measure incident polarized radiation with a finite detection bandwidth, this frequency dependence causes an uncertainty in the determination of the polarization angle due to the limited knowledge of the shape of the source spectrum and detection band. To mitigate this problem, we propose new designs of the AHWP which eliminate the frequency dependence of the optic axis over the bandwidth whilst maintaining high modulation efficiency. We carried out this optimization by tuning the relative angles among the individual half-wave plates of the five and nine layer AHWPs. The optimized set of relative angles achieves a frequency-independent optic axis over the fractional bandwidth, a bandwidth over which polarization efficiency is greater than 0.9, of 1.3 and 1.5 for the five and nine layer AHWPs, respectively. We also study the susceptibility of the alignment accuracy on the polarization efficiency and the frequency dependence of the optic axis, which provides a design guidance for each application.
△ Less
Submitted 20 August, 2021; v1 submitted 12 May, 2021;
originally announced May 2021.
-
Overview of the Medium and High Frequency Telescopes of the LiteBIRD satellite mission
Authors:
L. Montier,
B. Mot,
P. de Bernardis,
B. Maffei,
G. Pisano,
F. Columbro,
J. E. Gudmundsson,
S. Henrot-Versillé,
L. Lamagna,
J. Montgomery,
T. Prouvé,
M. Russell,
G. Savini,
S. Stever,
K. L. Thompson,
M. Tsujimoto,
C. Tucker,
B. Westbrook,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien
, et al. (212 additional authors not shown)
Abstract:
LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular…
▽ More
LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular scales, and over 15 frequency bands from 34GHz to 448GHz. The LiteBIRD instruments consist of three telescopes, namely the Low-, Medium- and High-Frequency Telescope (respectively LFT, MFT and HFT). We present in this paper an overview of the design of the Medium-Frequency Telescope (89-224GHz) and the High-Frequency Telescope (166-448GHz), the so-called MHFT, under European responsibility, which are two cryogenic refractive telescopes cooled down to 5K. They include a continuous rotating half-wave plate as the first optical element, two high-density polyethylene (HDPE) lenses and more than three thousand transition-edge sensor (TES) detectors cooled to 100mK. We provide an overview of the concept design and the remaining specific challenges that we have to face in order to achieve the scientific goals of LiteBIRD.
△ Less
Submitted 1 February, 2021;
originally announced February 2021.
-
LiteBIRD: JAXA's new strategic L-class mission for all-sky surveys of cosmic microwave background polarization
Authors:
M. Hazumi,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien,
J. Austermann,
C. Baccigalupi,
A. J. Banday,
R. Banjeri,
R. B. Barreiro,
S. Basak,
J. Beall,
D. Beck,
S. Beckman,
J. Bermejo,
P. de Bernardis,
M. Bersanelli,
J. Bonis,
J. Borrill,
F. Boulanger,
S. Bounissou,
M. Brilenkov
, et al. (213 additional authors not shown)
Abstract:
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave backgrou…
▽ More
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave background (CMB) polarization over the full sky with unprecedented precision. Its main scientific objective is to carry out a definitive search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with an insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. To this end, LiteBIRD will perform full-sky surveys for three years at the Sun-Earth Lagrangian point L2 for 15 frequency bands between 34 and 448 GHz with three telescopes, to achieve a total sensitivity of 2.16 micro K-arcmin with a typical angular resolution of 0.5 deg. at 100GHz. We provide an overview of the LiteBIRD project, including scientific objectives, mission requirements, top-level system requirements, operation concept, and expected scientific outcomes.
△ Less
Submitted 29 January, 2021;
originally announced January 2021.
-
Simons Observatory Small Aperture Telescope overview
Authors:
Kenji Kiuchi,
Shunsuke Adachi,
Aamir M. Ali,
Kam Arnold,
Peter Ashton,
Jason E. Austermann,
Andrew Bazako,
James A. Beall,
Yuji Chinone,
Gabriele Coppi,
Kevin D. Crowley,
Kevin T. Crowley,
Simon Dicker,
Bradley Dober,
Shannon M. Duff,
Giulio Fabbian,
Nicholas Galitzki,
Joseph E. Golec,
Jon E. Gudmundsson,
Kathleen Harrington,
Masaya Hasegawa,
Makoto Hattori,
Charles A. Hill,
Shuay-Pwu Patty Ho,
Johannes Hubmayr
, et al. (29 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a cosmic microwave background (CMB) experiment from the Atacama Desert in Chile comprising three small-aperture telescopes (SATs) and one large-aperture telescope (LAT). In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain…
▽ More
The Simons Observatory (SO) is a cosmic microwave background (CMB) experiment from the Atacama Desert in Chile comprising three small-aperture telescopes (SATs) and one large-aperture telescope (LAT). In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain numerous cosmological quantities. In this work, we focus on the SATs which are optimized to search for primordial gravitational waves that are detected as parity-odd polarization patterns called a B-modes on degree scales in the CMB. Each SAT employs a single optics tube with TES arrays operating at 100 mK. The high throughput optics system has a 42 cm aperture and a 35-degree field of view coupled to a 36 cm diameter focal plane. The optics consist of three metamaterial anti-re ection coated silicon lenses. Cryogenic ring baffles with engineered blackbody absorbers are installed in the optics tube to minimize the stray light. The entire optics tube is cooled to 1 K. A cryogenic continuously rotating half-wave plate near the sky side of the aperture stop helps to minimize the effect of atmospheric uctuations. The telescope warm baffling consists of a forebaffle, an elevation stage mounted co-moving shield, and a fixed ground shield that together control the far side-lobes and mitigates ground-synchronous systematics. We present the status of the SAT development.
△ Less
Submitted 28 January, 2021;
originally announced January 2021.
-
Concept Design of Low Frequency Telescope for CMB B-mode Polarization satellite LiteBIRD
Authors:
Y. Sekimoto,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien,
J. Austermann,
C. Baccigalupi,
A. J. Banday,
R. Banerji,
R. B. Barreiro,
S. Basak,
J. Beall,
D. Beck,
S. Beckman,
J. Bermejo,
P. de Bernardis,
M. Bersanelli,
J. Bonis,
J. Borrill,
F. Boulanger,
S. Bounissou,
M. Brilenkov
, et al. (212 additional authors not shown)
Abstract:
LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray li…
▽ More
LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray light increase with a wider FoV and the far sidelobe knowledge of $-56$ dB is a challenging optical requirement. A crossed-Dragone configuration was chosen for the low frequency telescope (LFT : 34--161 GHz), one of LiteBIRD's onboard telescopes. It has a wide field-of-view ($18^\circ \times 9^\circ$) with an aperture of 400 mm in diameter, corresponding to an angular resolution of about 30 arcminutes around 100 GHz. The focal ratio f/3.0 and the crossing angle of the optical axes of 90$^\circ$ are chosen after an extensive study of the stray light. The primary and secondary reflectors have rectangular shapes with serrations to reduce the diffraction pattern from the edges of the mirrors. The reflectors and structure are made of aluminum to proportionally contract from warm down to the operating temperature at $5\,$K. A 1/4 scaled model of the LFT has been developed to validate the wide field-of-view design and to demonstrate the reduced far sidelobes. A polarization modulation unit (PMU), realized with a half-wave plate (HWP) is placed in front of the aperture stop, the entrance pupil of this system. A large focal plane with approximately 1000 AlMn TES detectors and frequency multiplexing SQUID amplifiers is cooled to 100 mK. The lens and sinuous antennas have broadband capability. Performance specifications of the LFT and an outline of the proposed verification plan are presented.
△ Less
Submitted 15 January, 2021;
originally announced January 2021.
-
A minimal power-spectrum-based moment expansion for CMB B-mode searches
Authors:
S. Azzoni,
M. H. Abitbol,
D. Alonso,
A. Gough,
N. Katayama,
T. Matsumura
Abstract:
The characterization and modeling of polarized foregrounds has become a critical issue in the quest for primordial $B$-modes. A typical method to proceed is to factorize and parametrize the spectral properties of foregrounds and their scale dependence (i.e. assuming that foreground spectra are well described everywhere by their sky average). Since in reality foreground properties vary across the G…
▽ More
The characterization and modeling of polarized foregrounds has become a critical issue in the quest for primordial $B$-modes. A typical method to proceed is to factorize and parametrize the spectral properties of foregrounds and their scale dependence (i.e. assuming that foreground spectra are well described everywhere by their sky average). Since in reality foreground properties vary across the Galaxy, this assumption leads to inaccuracies in the model that manifest themselves as biases in the final cosmological parameters (in this case the tensor-to-scalar ratio $r$). This is particularly relevant for surveys over large fractions of the sky, such as the Simons Observatory (SO), where the spectra should be modeled over a distribution of parameter values. Here we propose a method based on the existing ``moment expansion'' approach to address this issue in a power-spectrum-based analysis that is directly applicable in ground-based multi-frequency data. Additionally, the method uses only a small set of parameters with simple physical interpretation, minimizing the impact of foreground uncertainties on the final $B$-mode constraints. We validate the method using SO-like simulated observations, recovering an unbiased estimate of the tensor-to-scalar ratio $r$ with standard deviation $σ(r)\simeq0.003$, compatible with official forecasts. When applying the method to the public BICEP2/Keck data, we find an upper bound $r<0.06$ ($95\%\,{\rm C.L.}$), compatible with the result found by BICEP2/Keck when parametrizing spectral index variations through a scale-independent frequency decorrelation parameter. We also discuss the formal similarities between the power spectrum-based moment expansion and methods used in the analysis of CMB lensing.
△ Less
Submitted 23 November, 2020;
originally announced November 2020.
-
CMB-S4: Forecasting Constraints on Primordial Gravitational Waves
Authors:
CMB-S4 Collaboration,
:,
Kevork Abazajian,
Graeme E. Addison,
Peter Adshead,
Zeeshan Ahmed,
Daniel Akerib,
Aamir Ali,
Steven W. Allen,
David Alonso,
Marcelo Alvarez,
Mustafa A. Amin,
Adam Anderson,
Kam S. Arnold,
Peter Ashton,
Carlo Baccigalupi,
Debbie Bard,
Denis Barkats,
Darcy Barron,
Peter S. Barry,
James G. Bartlett,
Ritoban Basu Thakur,
Nicholas Battaglia,
Rachel Bean,
Chris Bebek
, et al. (212 additional authors not shown)
Abstract:
CMB-S4---the next-generation ground-based cosmic microwave background (CMB) experiment---is set to significantly advance the sensitivity of CMB measurements and enhance our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. Among the science cases pursued with CMB-S4, the quest for detecting p…
▽ More
CMB-S4---the next-generation ground-based cosmic microwave background (CMB) experiment---is set to significantly advance the sensitivity of CMB measurements and enhance our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. Among the science cases pursued with CMB-S4, the quest for detecting primordial gravitational waves is a central driver of the experimental design. This work details the development of a forecasting framework that includes a power-spectrum-based semi-analytic projection tool, targeted explicitly towards optimizing constraints on the tensor-to-scalar ratio, $r$, in the presence of Galactic foregrounds and gravitational lensing of the CMB. This framework is unique in its direct use of information from the achieved performance of current Stage 2--3 CMB experiments to robustly forecast the science reach of upcoming CMB-polarization endeavors. The methodology allows for rapid iteration over experimental configurations and offers a flexible way to optimize the design of future experiments given a desired scientific goal. To form a closed-loop process, we couple this semi-analytic tool with map-based validation studies, which allow for the injection of additional complexity and verification of our forecasts with several independent analysis methods. We document multiple rounds of forecasts for CMB-S4 using this process and the resulting establishment of the current reference design of the primordial gravitational-wave component of the Stage-4 experiment, optimized to achieve our science goals of detecting primordial gravitational waves for $r > 0.003$ at greater than $5σ$, or, in the absence of a detection, of reaching an upper limit of $r < 0.001$ at $95\%$ CL.
△ Less
Submitted 27 August, 2020;
originally announced August 2020.
-
Broadband, millimeter-wave anti-reflective structures on sapphire ablated with femto-second laser
Authors:
R. Takaku,
S. Hanany,
H. Imada,
H. Ishino,
N. Katayama,
K. Komatsu,
K. Konishi,
M. Kuwata-Gonokami,
T. Matsumura,
K. Mitsuda,
H. Sakurai,
Y. Sakurai,
Q. Wen,
N. Y. Yamasaki,
K. Young,
J. Yumoto
Abstract:
We designed, fabricated, and measured anti-reflection coating (ARC) on sapphire that has 116% fractional bandwidth and transmission of at least 97% in the millimeter wave band. The ARC was based on patterning pyramid-like sub-wavelength structures (SWS) using ablation with a 15 W femto-second laser operating at 1030 nm. One side of each of two discs was fabricated with SWS that had a pitch of 0.54…
▽ More
We designed, fabricated, and measured anti-reflection coating (ARC) on sapphire that has 116% fractional bandwidth and transmission of at least 97% in the millimeter wave band. The ARC was based on patterning pyramid-like sub-wavelength structures (SWS) using ablation with a 15 W femto-second laser operating at 1030 nm. One side of each of two discs was fabricated with SWS that had a pitch of 0.54 mm and height of 2 mm. The average ablation volume removal rate was 1.6 mm$^{3}$/min. Measurements of the two-disc sandwich show transmission higher than 97% between 43 and 161 GHz. We characterize instrumental polarization (IP) arising from differential transmission due to asymmetric SWS. We find that with proper alignment of the two disc sandwich RMS IP across the band is predicted to be 0.07% at normal incidence, and less than 0.6% at incidence angles up to 20 degrees. These results indicate that laser ablation of SWS on sapphire and on other hard materials such as alumina is an effective way to fabricate broad-band ARC.
△ Less
Submitted 16 December, 2020; v1 submitted 30 July, 2020;
originally announced July 2020.
-
A measurement of the CMB E-mode angular power spectrum at subdegree scales from 670 square degrees of POLARBEAR data
Authors:
S. Adachi,
M. A. O. Aguilar Faúndez,
K. Arnold,
C. Baccigalupi,
D. Barron,
D. Beck,
F. Bianchini,
S. Chapman,
K. Cheung,
Y. Chinone,
K. Crowley,
M. Dobbs,
H. El Bouhargani,
T. Elleflot,
J. Errard,
G. Fabbian,
C. Feng,
T. Fu**o,
N. Galitzki,
N. Goeckner-Wald,
J. Groh,
G. Hall,
M. Hasegawa,
M. Hazumi,
H. Hirose
, et al. (31 additional authors not shown)
Abstract:
We report a measurement of the E-mode polarization power spectrum of the cosmic microwave background (CMB) using 150 GHz data taken from July 2014 to December 2016 with the POLARBEAR experiment. We reach an effective polarization map noise level of $32\,μ\mathrm{K}$-$\mathrm{arcmin}$ across an observation area of 670 square degrees. We measure the EE power spectrum over the angular multipole range…
▽ More
We report a measurement of the E-mode polarization power spectrum of the cosmic microwave background (CMB) using 150 GHz data taken from July 2014 to December 2016 with the POLARBEAR experiment. We reach an effective polarization map noise level of $32\,μ\mathrm{K}$-$\mathrm{arcmin}$ across an observation area of 670 square degrees. We measure the EE power spectrum over the angular multipole range $500 \leq \ell <3000$, tracing the third to seventh acoustic peaks with high sensitivity. The statistical uncertainty on E-mode bandpowers is $\sim 2.3 μ{\rm K}^2$ at $\ell \sim 1000$ with a systematic uncertainty of 0.5$μ{\rm K}^2$. The data are consistent with the standard $Λ$CDM cosmological model with a probability-to-exceed of 0.38. We combine recent CMB E-mode measurements and make inferences about cosmological parameters in $Λ$CDM as well as in extensions to $Λ$CDM. Adding the ground-based CMB polarization measurements to the Planck dataset reduces the uncertainty on the Hubble constant by a factor of 1.2 to $H_0 = 67.20 \pm 0.57 {\rm km\,s^{-1} \,Mpc^{-1}}$. When allowing the number of relativistic species ($N_{eff}$) to vary, we find $N_{eff} = 2.94 \pm 0.16$, which is in good agreement with the standard value of 3.046. Instead allowing the primordial helium abundance ($Y_{He}$) to vary, the data favor $Y_{He} = 0.248 \pm 0.012$. This is very close to the expectation of 0.2467 from Big Bang Nucleosynthesis. When varying both $Y_{He}$ and $N_{eff}$, we find $N_{eff} = 2.70 \pm 0.26$ and $Y_{He} = 0.262 \pm 0.015$.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Updated design of the CMB polarization experiment satellite LiteBIRD
Authors:
H. Sugai,
P. A. R. Ade,
Y. Akiba,
D. Alonso,
K. Arnold,
J. Aumont,
J. Austermann,
C. Baccigalupi,
A. J. Banday,
R. Banerji,
R. B. Barreiro,
S. Basak,
J. Beall,
S. Beckman,
M. Bersanelli,
J. Borrill,
F. Boulanger,
M. L. Brown,
M. Bucher,
A. Buzzelli,
E. Calabrese,
F. J. Casas,
A. Challinor,
V. Chan,
Y. Chinone
, et al. (196 additional authors not shown)
Abstract:
Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will ac…
▽ More
Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will accommodate more than 4000 TESs in focal planes of reflective low-frequency and refractive medium-and-high-frequency telescopes in order to detect a signature imprinted on the cosmic microwave background (CMB) by the primordial gravitational waves predicted in cosmic inflation. The total wide frequency coverage between 34GHz and 448GHz enables us to extract such weak spiral polarization patterns through the precise subtraction of our Galaxy's foreground emission by using spectral differences among CMB and foreground signals. Telescopes are cooled down to 5Kelvin for suppressing thermal noise and contain polarization modulators with transmissive half-wave plates at individual apertures for separating sky polarization signals from artificial polarization and for mitigating from instrumental 1/f noise. Passive cooling by using V-grooves supports active cooling with mechanical coolers as well as adiabatic demagnetization refrigerators. Sky observations from the second Sun-Earth Lagrangian point, L2, are planned for three years. An international collaboration between Japan, USA, Canada, and Europe is sharing various roles. In May 2019, the Institute of Space and Astronautical Science (ISAS), JAXA selected LiteBIRD as the strategic large mission No. 2.
△ Less
Submitted 6 January, 2020;
originally announced January 2020.
-
Design of a testbed for the study of system interference in space CMB polarimetry
Authors:
Tommaso Ghigna,
Tomotake Matsumura,
Masashi Hazumi,
Samantha Lynn Stever,
Yuki Sakurai,
Nobuhiko Katayama,
Aritoki Suzuki,
Benjamin Westbrook,
Adrian Lee
Abstract:
LiteBIRD is a proposed JAXA satellite mission to measure the CMB B-mode polarization with unprecedented sensitivity ($σ_r\sim 0.001$). To achieve this goal, $4676$ state-of-the-art TES bolometers will observe the whole sky for 3 years from L2. These detectors, as well as the SQUID readout, are extremely susceptible to EMI and other instrumental disturbances e.g. static magnetic field and vibration…
▽ More
LiteBIRD is a proposed JAXA satellite mission to measure the CMB B-mode polarization with unprecedented sensitivity ($σ_r\sim 0.001$). To achieve this goal, $4676$ state-of-the-art TES bolometers will observe the whole sky for 3 years from L2. These detectors, as well as the SQUID readout, are extremely susceptible to EMI and other instrumental disturbances e.g. static magnetic field and vibration. As a result, careful analysis of the interference between the detector system and the rest of the telescope instruments is essential. This study is particularly important during the early phase of the project, in order to address potential problems before the final assembly of the whole instrument. We report our plan for the preparation of a cryogenic testbed to study the interaction between the detectors and other subsystems, especially a polarization modulator unit consisting of a magnetically-rotating half wave plate. We also present the requirements, current status and preliminary results.
△ Less
Submitted 26 November, 2019;
originally announced November 2019.
-
Measurement of the Cosmic Microwave Background Polarization Lensing Power Spectrum from Two Years of POLARBEAR Data
Authors:
Mario Aguilar Faúndez,
Kam Arnold,
Carlo Baccigalupi,
Darcy Barron,
Dominic Beck,
Shawn Beckman,
Federico Bianchini,
Julien Carron,
Kolen Cheung,
Yuji Chinone,
Hamza El Bouhargani,
Tucker Elleflot,
Josquin Errard,
Giulio Fabbian,
Chang Feng,
Takuro Fu**o,
Neil Goeckner-Wald,
Takaho Hamada,
Masaya Hasegawa,
Masashi Hazumi,
Charles A. Hill,
Haruaki Hirose,
Oliver Jeong,
Nobuhiko Katayama,
Brian Keating
, et al. (26 additional authors not shown)
Abstract:
We present a measurement of the gravitational lensing deflection power spectrum reconstructed with two seasons cosmic microwave background polarization data from the POLARBEAR experiment. Observations were taken at 150 GHz from 2012 to 2014 which survey three patches of sky totaling 30 square degrees. We test the consistency of the lensing spectrum with a Cold Dark Matter (CDM) cosmology and rejec…
▽ More
We present a measurement of the gravitational lensing deflection power spectrum reconstructed with two seasons cosmic microwave background polarization data from the POLARBEAR experiment. Observations were taken at 150 GHz from 2012 to 2014 which survey three patches of sky totaling 30 square degrees. We test the consistency of the lensing spectrum with a Cold Dark Matter (CDM) cosmology and reject the no-lensing hypothesis at a confidence of 10.9 sigma including statistical and systematic uncertainties. We observe a value of A_L = 1.33 +/- 0.32 (statistical) +/- 0.02 (systematic) +/- 0.07 (foreground) using all polarization lensing estimators, which corresponds to a 24% accurate measurement of the lensing amplitude. Compared to the analysis of the first year data, we have improved the breadth of both the suite of null tests and the error terms included in the estimation of systematic contamination.
△ Less
Submitted 6 March, 2020; v1 submitted 25 November, 2019;
originally announced November 2019.
-
FPFS Shear Estimator: Systematic Tests on the Hyper Suprime-Cam Survey First Year Data
Authors:
Xiangchong Li,
Masamune Oguri,
Nobuhiko Katayama,
Wentao Luo,
Wenting Wang,
Jiaxin Han,
Hironao Miyatake,
Keigo Nakamura,
Surhud More
Abstract:
We apply the Fourier Power Function Shapelets (FPFS) shear estimator to the first year data of the Hyper Suprime-Cam survey to construct a shape catalog. The FPFS shear estimator has been demonstrated to have multiplicative bias less than $1\%$ in the absence of blending, regardless of complexities of galaxy shapes, smears of point spread functions (PSFs) and contamination from noise. The blending…
▽ More
We apply the Fourier Power Function Shapelets (FPFS) shear estimator to the first year data of the Hyper Suprime-Cam survey to construct a shape catalog. The FPFS shear estimator has been demonstrated to have multiplicative bias less than $1\%$ in the absence of blending, regardless of complexities of galaxy shapes, smears of point spread functions (PSFs) and contamination from noise. The blending bias is calibrated with realistic image simulations, which include the impact of neighboring objects, using the COSMOS Hubble Space Telescope images. Here we carefully test the influence of PSF model residual on the FPFS shear estimation and the uncertainties in the shear calibration. Internal null tests are conducted to characterize potential systematics in the FPFS shape catalog and the results are compared with those measured using a catalog where the shapes were estimated using the re-Gaussianization algorithms. Furthermore, we compare various weak lensing measurements between the FPFS shape catalog and the re-Gaussianization shape catalog and conclude that the weak lensing measurements between these two shape catalogs are consistent with each other within the statistical uncertainty.
△ Less
Submitted 18 February, 2021; v1 submitted 5 November, 2019;
originally announced November 2019.
-
A Measurement of the Degree Scale CMB B-mode Angular Power Spectrum with POLARBEAR
Authors:
S. Adachi,
M. A. O. Aguilar Faúndez,
K. Arnold,
C. Baccigalupi,
D. Barron,
D. Beck,
S. Beckman,
F. Bianchini,
D. Boettger,
J. Borrill,
J. Carron,
S. Chapman,
K. Cheung,
Y. Chinone,
K. Crowley,
A. Cukierman,
M. Dobbs,
H. El Bouhargani,
T. Elleflot,
J. Errard,
G. Fabbian,
C. Feng,
T. Fu**o,
N. Galitzki,
N. Goeckner-Wald
, et al. (47 additional authors not shown)
Abstract:
We present a measurement of the $B$-mode polarization power spectrum of the cosmic microwave background (CMB) using taken from July 2014 to December 2016 with the POLARBEAR experiment. The CMB power spectra are measured using observations at 150 GHz with an instantaneous array sensitivity of $\mathrm{NET}_\mathrm{array}=23\, μ\mathrm{K} \sqrt{\mathrm{s}}$ on a 670 square degree patch of sky center…
▽ More
We present a measurement of the $B$-mode polarization power spectrum of the cosmic microwave background (CMB) using taken from July 2014 to December 2016 with the POLARBEAR experiment. The CMB power spectra are measured using observations at 150 GHz with an instantaneous array sensitivity of $\mathrm{NET}_\mathrm{array}=23\, μ\mathrm{K} \sqrt{\mathrm{s}}$ on a 670 square degree patch of sky centered at (RA, Dec)=($+0^\mathrm{h}12^\mathrm{m}0^\mathrm{s},-59^\circ18^\prime$). A continuously rotating half-wave plate is used to modulate polarization and to suppress low-frequency noise. We achieve $32\,μ\mathrm{K}$-$\mathrm{arcmin}$ effective polarization map noise with a knee in sensitivity of $\ell = 90$, where the inflationary gravitational wave signal is expected to peak. The measured $B$-mode power spectrum is consistent with a $Λ$CDM lensing and single dust component foreground model over a range of multipoles $50 \leq \ell \leq 600$. The data disfavor zero $C_\ell^{BB}$ at $2.2σ$ using this $\ell$ range of POLARBEAR data alone. We cross-correlate our data with Planck high frequency maps and find the low-$\ell$ $B$-mode power in the combined dataset to be consistent with thermal dust emission. We place an upper limit on the tensor-to-scalar ratio $r < 0.90$ at 95% confidence level after marginalizing over foregrounds.
△ Less
Submitted 7 October, 2019;
originally announced October 2019.
-
Internal delensing of Cosmic Microwave Background polarization B-modes with the POLARBEAR experiment
Authors:
S. Adachi,
M. A. O. Aguilar Faúndez,
Y. Akiba,
A. Ali,
K. Arnold,
C. Baccigalupi,
D. Barron,
D. Beck,
F. Bianchini,
J. Borrill,
J. Carron,
K. Cheung,
Y. Chinone,
K. Crowley,
H. El Bouhargani,
T. Elleflot,
J. Errard,
G. Fabbian,
C. Feng,
T. Fu**o,
N. Goeckner-Wald,
M. Hasegawa,
M. Hazumi,
C. A. Hill,
L. Howe
, et al. (29 additional authors not shown)
Abstract:
Using only cosmic microwave background polarization data from the POLARBEAR experiment, we measure $B$-mode polarization delensing on subdegree scales at more than $5σ$ significance. We achieve a 14% $B$-mode power variance reduction, the highest to date for internal delensing, and improve this result to 2% by applying for the first time an iterative maximum a posteriori delensing method. Our anal…
▽ More
Using only cosmic microwave background polarization data from the POLARBEAR experiment, we measure $B$-mode polarization delensing on subdegree scales at more than $5σ$ significance. We achieve a 14% $B$-mode power variance reduction, the highest to date for internal delensing, and improve this result to 2% by applying for the first time an iterative maximum a posteriori delensing method. Our analysis demonstrates the capability of internal delensing as a means of improving constraints on inflationary models, paving the way for the optimal analysis of next-generation primordial $B$-mode experiments.
△ Less
Submitted 1 April, 2020; v1 submitted 30 September, 2019;
originally announced September 2019.
-
CMB-S4 Decadal Survey APC White Paper
Authors:
Kevork Abazajian,
Graeme Addison,
Peter Adshead,
Zeeshan Ahmed,
Steven W. Allen,
David Alonso,
Marcelo Alvarez,
Mustafa A. Amin,
Adam Anderson,
Kam S. Arnold,
Carlo Baccigalupi,
Kathy Bailey,
Denis Barkats,
Darcy Barron,
Peter S. Barry,
James G. Bartlett,
Ritoban Basu Thakur,
Nicholas Battaglia,
Eric Baxter,
Rachel Bean,
Chris Bebek,
Amy N. Bender,
Bradford A. Benson,
Edo Berger,
Sanah Bhimani
, et al. (200 additional authors not shown)
Abstract:
We provide an overview of the science case, instrument configuration and project plan for the next-generation ground-based cosmic microwave background experiment CMB-S4, for consideration by the 2020 Decadal Survey.
We provide an overview of the science case, instrument configuration and project plan for the next-generation ground-based cosmic microwave background experiment CMB-S4, for consideration by the 2020 Decadal Survey.
△ Less
Submitted 31 July, 2019;
originally announced August 2019.
-
The Simons Observatory: Astro2020 Decadal Project Whitepaper
Authors:
The Simons Observatory Collaboration,
Maximilian H. Abitbol,
Shunsuke Adachi,
Peter Ade,
James Aguirre,
Zeeshan Ahmed,
Simone Aiola,
Aamir Ali,
David Alonso,
Marcelo A. Alvarez,
Kam Arnold,
Peter Ashton,
Zachary Atkins,
Jason Austermann,
Humna Awan,
Carlo Baccigalupi,
Taylor Baildon,
Anton Baleato Lizancos,
Darcy Barron,
Nick Battaglia,
Richard Battye,
Eric Baxter,
Andrew Bazarko,
James A. Beall,
Rachel Bean
, et al. (258 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) experiment sited on Cerro Toco in the Atacama Desert in Chile that promises to provide breakthrough discoveries in fundamental physics, cosmology, and astrophysics. Supported by the Simons Foundation, the Heising-Simons Foundation, and with contributions from collaborating institutions, SO will see first light in 2021…
▽ More
The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) experiment sited on Cerro Toco in the Atacama Desert in Chile that promises to provide breakthrough discoveries in fundamental physics, cosmology, and astrophysics. Supported by the Simons Foundation, the Heising-Simons Foundation, and with contributions from collaborating institutions, SO will see first light in 2021 and start a five year survey in 2022. SO has 287 collaborators from 12 countries and 53 institutions, including 85 students and 90 postdocs.
The SO experiment in its currently funded form ('SO-Nominal') consists of three 0.4 m Small Aperture Telescopes (SATs) and one 6 m Large Aperture Telescope (LAT). Optimized for minimizing systematic errors in polarization measurements at large angular scales, the SATs will perform a deep, degree-scale survey of 10% of the sky to search for the signature of primordial gravitational waves. The LAT will survey 40% of the sky with arc-minute resolution. These observations will measure (or limit) the sum of neutrino masses, search for light relics, measure the early behavior of Dark Energy, and refine our understanding of the intergalactic medium, clusters and the role of feedback in galaxy formation.
With up to ten times the sensitivity and five times the angular resolution of the Planck satellite, and roughly an order of magnitude increase in map** speed over currently operating ("Stage 3") experiments, SO will measure the CMB temperature and polarization fluctuations to exquisite precision in six frequency bands from 27 to 280 GHz. SO will rapidly advance CMB science while informing the design of future observatories such as CMB-S4.
△ Less
Submitted 16 July, 2019;
originally announced July 2019.
-
CMB-S4 Science Case, Reference Design, and Project Plan
Authors:
Kevork Abazajian,
Graeme Addison,
Peter Adshead,
Zeeshan Ahmed,
Steven W. Allen,
David Alonso,
Marcelo Alvarez,
Adam Anderson,
Kam S. Arnold,
Carlo Baccigalupi,
Kathy Bailey,
Denis Barkats,
Darcy Barron,
Peter S. Barry,
James G. Bartlett,
Ritoban Basu Thakur,
Nicholas Battaglia,
Eric Baxter,
Rachel Bean,
Chris Bebek,
Amy N. Bender,
Bradford A. Benson,
Edo Berger,
Sanah Bhimani,
Colin A. Bischoff
, et al. (200 additional authors not shown)
Abstract:
We present the science case, reference design, and project plan for the Stage-4 ground-based cosmic microwave background experiment CMB-S4.
We present the science case, reference design, and project plan for the Stage-4 ground-based cosmic microwave background experiment CMB-S4.
△ Less
Submitted 9 July, 2019;
originally announced July 2019.
-
Demonstration of the broadband half-wave plate using the nine-layer sapphire for the CMB polarization experiment
Authors:
Kunimoto Komatsu,
Tomotake Matsumura,
Hiroaki Imada,
Hirokazu Ishino,
Nobuhiko Katayama,
Yuki Sakurai
Abstract:
We report the development of the achromatic half-wave plate (AHWP) at millimeter wave for cosmic microwave background polarization experiments. We fabricate an AHWP consisting of nine a-cut sapphire plates based on the Pancharatnam recipe to cover a wide frequency range. The modulation efficiency and the phase are measured in a frequency range of 33 to 260 GHz with incident angles up to 10 degrees…
▽ More
We report the development of the achromatic half-wave plate (AHWP) at millimeter wave for cosmic microwave background polarization experiments. We fabricate an AHWP consisting of nine a-cut sapphire plates based on the Pancharatnam recipe to cover a wide frequency range. The modulation efficiency and the phase are measured in a frequency range of 33 to 260 GHz with incident angles up to 10 degrees. We find the measurements at room temperature are in good agreement with the predictions. This is the broadest demonstration of the AHWP at the millimeter wave.
△ Less
Submitted 22 January, 2020; v1 submitted 31 May, 2019;
originally announced May 2019.
-
Simultaneous determination of the cosmic birefringence and miscalibrated polarisation angles from CMB experiments
Authors:
Yuto Minami,
Hiroki Ochi,
Kiyotomo Ichiki,
Nobuhiko Katayama,
Eiichiro Komatsu,
Tomotake Matsumura
Abstract:
We show that the cosmic birefringence and miscalibrated polarisation angles can be determined simultaneously by cosmic microwave background (CMB) experiments using the cross-correlation between $E$- and $B$-mode polarisation data. This is possible because polarisation angles of the CMB are rotated by both the cosmic birefringence and miscalibration effects,whereas those of the Galactic foreground…
▽ More
We show that the cosmic birefringence and miscalibrated polarisation angles can be determined simultaneously by cosmic microwave background (CMB) experiments using the cross-correlation between $E$- and $B$-mode polarisation data. This is possible because polarisation angles of the CMB are rotated by both the cosmic birefringence and miscalibration effects,whereas those of the Galactic foreground emission only by the latter. Our method does not require prior knowledge of the $E$- and $B$-mode power spectra of the foreground emission, but uses only the knowledge of the CMB polarisation spectra. Specifically, we relate the observed $EB$ correlation to the difference between the $\mathit{observed}$ $E$- and $B$-mode spectra in the sky, and use different multipole dependence of the CMB (given by theory) and foreground spectra (with no assumption) to derive the likelihood for the miscalibration angle $α$ and the birefringence angle $β$. We show that a future satellite mission similar to LiteBIRD can determine $β$ with a precision of ten arcminutes.
△ Less
Submitted 29 April, 2019;
originally announced April 2019.
-
The POLARBEAR Fourier Transform Spectrometer Calibrator and Spectroscopic Characterization of the POLARBEAR Instrument
Authors:
Frederick Matsuda,
Lindsay Lowry,
Aritoki Suzuki,
Mario Aguilar Faundez,
Kam Arnold,
Darcy Barron,
Federico Bianchini,
Kolen Cheung,
Yuji Chinone,
Tucker Elleflot,
Giulio Fabbian,
Neil Goeckner-Wald,
Masaya Hasegawa,
Daisuke Kaneko,
Nobuhiko Katayama,
Brian Keating,
Adrian Lee,
Martin Navaroli,
Haruki Nishino,
Hans Paar,
Giuseppe Puglisi,
Paul Richards,
Joseph Seibert,
Praween Siritanasak,
Osamu Tajima
, et al. (3 additional authors not shown)
Abstract:
We describe the Fourier Transform Spectrometer (FTS) used for in-field testing of the POLARBEAR receiver, an experiment located in the Atacama Desert of Chile which measures the cosmic microwave background (CMB) polarization. The POLARBEAR-FTS (PB-FTS) is a Martin-Puplett interferometer designed to couple to the Huan Tran Telescope (HTT) on which the POLARBEAR receiver is installed. The PB-FTS mea…
▽ More
We describe the Fourier Transform Spectrometer (FTS) used for in-field testing of the POLARBEAR receiver, an experiment located in the Atacama Desert of Chile which measures the cosmic microwave background (CMB) polarization. The POLARBEAR-FTS (PB-FTS) is a Martin-Puplett interferometer designed to couple to the Huan Tran Telescope (HTT) on which the POLARBEAR receiver is installed. The PB-FTS measured the spectral response of the POLARBEAR receiver with signal-to-noise ratio (SNR) $>20$ for $\sim$69% of the focal plane detectors due to three features: a high throughput of 15.1 steradian cm$^{2}$, optimized optical coupling to the POLARBEAR optics using a custom designed output parabolic mirror, and a continuously modulated output polarizer. The PB-FTS parabolic mirror is designed to mimic the shape of the 2.5 m-diameter HTT primary reflector which allows for optimum optical coupling to the POLARBEAR receiver, reducing aberrations and systematics. One polarizing grid is placed at the output of the PB-FTS, and modulated via continuous rotation. This modulation allows for decomposition of the signal into different harmonics that can be used to probe potentially pernicious sources of systematic error in a polarization-sensitive instrument. The high throughput and continuous output polarizer modulation features are unique compared to other FTS calibrators used in the CMB field. In-field characterization of the POLARBEAR receiver was accomplished using the PB-FTS in April 2014. We discuss the design, construction, and operation of the PB-FTS and present the spectral characterization of the POLARBEAR receiver. We introduce future applications for the PB-FTS in the next-generation CMB experiment, the Simons Array.
△ Less
Submitted 27 January, 2020; v1 submitted 5 April, 2019;
originally announced April 2019.
-
Evidence for the Cross-correlation between Cosmic Microwave Background Polarization Lensing from POLARBEAR and Cosmic Shear from Subaru Hyper Suprime-Cam
Authors:
Toshiya Namikawa,
Yuji Chinone,
Hironao Miyatake,
Masamune Oguri,
Ryuichi Takahashi,
Akito Kusaka,
Nobuhiko Katayama,
Shunsuke Adachi,
Mario Aguilar,
Hiroaki Aihara,
Aamir Ali,
Robert Armstrong,
Kam Arnold,
Carlo Baccigalupi,
Darcy Barron,
Dominic Beck,
Shawn Beckman,
Federico Bianchini,
David Boettger,
Julian Borrill,
Kolen Cheung,
Lance Corbett,
Kevin T. Crowley,
Hamza El Bouhargani,
Tucker Elleflot
, et al. (50 additional authors not shown)
Abstract:
We present the first measurement of cross-correlation between the lensing potential, reconstructed from cosmic microwave background (CMB) {\it polarization} data, and the cosmic shear field from galaxy shapes. This measurement is made using data from the POLARBEAR CMB experiment and the Subaru Hyper Suprime-Cam (HSC) survey. By analyzing an 11~deg$^2$ overlap** region, we reject the null hypothe…
▽ More
We present the first measurement of cross-correlation between the lensing potential, reconstructed from cosmic microwave background (CMB) {\it polarization} data, and the cosmic shear field from galaxy shapes. This measurement is made using data from the POLARBEAR CMB experiment and the Subaru Hyper Suprime-Cam (HSC) survey. By analyzing an 11~deg$^2$ overlap** region, we reject the null hypothesis at 3.5$σ$\ and constrain the amplitude of the {\bf cross-spectrum} to $\widehat{A}_{\rm lens}=1.70\pm 0.48$, where $\widehat{A}_{\rm lens}$ is the amplitude normalized with respect to the Planck~2018{} prediction, based on the flat $Λ$ cold dark matter cosmology. The first measurement of this {\bf cross-spectrum} without relying on CMB temperature measurements is possible due to the deep POLARBEAR map with a noise level of ${\sim}$6\,$μ$K-arcmin, as well as the deep HSC data with a high galaxy number density of $n_g=23\,{\rm arcmin^{-2}}$. We present a detailed study of the systematics budget to show that residual systematics in our results are negligibly small, which demonstrates the future potential of this cross-correlation technique.
△ Less
Submitted 11 October, 2019; v1 submitted 3 April, 2019;
originally announced April 2019.
-
Cross-correlation of POLARBEAR CMB Polarization Lensing with High-$z$ Sub-mm Herschel-ATLAS galaxies
Authors:
M. Aguilar Faundez,
K. Arnold,
C. Baccigalupi,
D. Barron,
D. Beck,
F. Bianchini,
D. Boettger,
J. Borrill,
J. Carron,
K. Cheung,
Y. Chinone,
H. El Bouhargani,
T. Elleflot,
J. Errard,
G. Fabbian,
C. Feng,
N. Galitzki,
N. Goeckner-Wald,
M. Hasegawa,
M. Hazumi,
L. Howe,
D. Kaneko,
N. Katayama,
B. Keating,
N. Krachmalnicoff
, et al. (23 additional authors not shown)
Abstract:
We report a 4.8$σ$ measurement of the cross-correlation signal between the cosmic microwave background (CMB) lensing convergence reconstructed from measurements of the CMB polarization made by the POLARBEAR experiment and the infrared-selected galaxies of the Herschel-ATLAS survey. This is the first measurement of its kind. We infer a best-fit galaxy bias of $b = 5.76 \pm 1.25$, corresponding to a…
▽ More
We report a 4.8$σ$ measurement of the cross-correlation signal between the cosmic microwave background (CMB) lensing convergence reconstructed from measurements of the CMB polarization made by the POLARBEAR experiment and the infrared-selected galaxies of the Herschel-ATLAS survey. This is the first measurement of its kind. We infer a best-fit galaxy bias of $b = 5.76 \pm 1.25$, corresponding to a host halo mass of $\log_{10}(M_h/M_\odot) =13.5^{+0.2}_{-0.3}$ at an effective redshift of $z \sim 2$ from the cross-correlation power spectrum. Residual uncertainties in the redshift distribution of the sub-mm galaxies are subdominant with respect to the statistical precision. We perform a suite of systematic tests, finding that instrumental and astrophysical contaminations are small compared to the statistical error. This cross-correlation measurement only relies on CMB polarization information that, differently from CMB temperature maps, is less contaminated by galactic and extra-galactic foregrounds, providing a clearer view of the projected matter distribution. This result demonstrates the feasibility and robustness of this approach for future high-sensitivity CMB polarization experiments.
△ Less
Submitted 18 November, 2019; v1 submitted 17 March, 2019;
originally announced March 2019.
-
Delta-map method to remove CMB foregrounds with spatially varying spectra
Authors:
Kiyotomo Ichiki,
Hiroaki Kanai,
Nobuhiko Katayama,
Eiichiro Komatsu
Abstract:
We extend the internal template foreground removal method by accounting for spatially varying spectral parameters such as the spectral indices of synchrotron and dust emission and the dust temperature. As the previous algorithm had to assume that the spectral parameters are uniform over the full sky (or some significant fraction of the sky), it resulted in a bias in the tensor-to-scalar ratio para…
▽ More
We extend the internal template foreground removal method by accounting for spatially varying spectral parameters such as the spectral indices of synchrotron and dust emission and the dust temperature. As the previous algorithm had to assume that the spectral parameters are uniform over the full sky (or some significant fraction of the sky), it resulted in a bias in the tensor-to-scalar ratio parameter $r$ estimated from foreground-cleaned polarization maps of the cosmic microwave background (CMB). The new algorithm, "Delta-map method", accounts for spatially varying spectra to first order in perturbation. The only free parameters are the cosmological parameters such as $r$ and the sky-averaged foreground parameters. We show that a cleaned CMB map is the maximum likelihood solution to first order in perturbation, and derive the posterior distribution of $r$ and the sky-averaged foreground parameters using Bayesian statistics. Applying this to realistic simulated sky maps including polarized CMB, synchrotron and thermal dust emission, we find that the new algorithm removes the bias in $r$ down to undetected level in our noiseless simulation ($r\lesssim 4\times 10^{-4}$). We show that the frequency decorrelation of polarized foregrounds due to averaging of spatially varying spectra can be accounted for to first order in perturbation by using slightly different spectral parameters for the Stokes $Q$ and $U$ maps. Finally, we show that the effect of polarized anomalous microwave emission on foreground removal can be absorbed into the curvature parameter of the synchrotron spectrum.
△ Less
Submitted 31 January, 2019; v1 submitted 9 November, 2018;
originally announced November 2018.
-
Measurements of tropospheric ice clouds with a ground-based CMB polarization experiment, POLARBEAR
Authors:
Satoru Takakura,
Mario A. O. Aguilar-Faúndez,
Yoshiki Akiba,
Kam Arnold,
Carlo Baccigalupi,
Darcy Barron,
Dominic Beck,
Federico Bianchini,
David Boettger,
Julian Borrill,
Kolen Cheung,
Yuji Chinone,
Tucker Elleflot,
Josquin Errard,
Giulio Fabbian,
Chang Feng,
Neil Goeckner-Wald,
Takaho Hamada,
Masaya Hasegawa,
Masashi Hazumi,
Logan Howe,
Daisuke Kaneko,
Nobuhiko Katayama,
Brian Keating,
Reijo Keskitalo
, et al. (23 additional authors not shown)
Abstract:
The polarization of the atmosphere has been a long-standing concern for ground-based experiments targeting cosmic microwave background (CMB) polarization. Ice crystals in upper tropospheric clouds scatter thermal radiation from the ground and produce a horizontally-polarized signal. We report the detailed analysis of the cloud signal using a ground-based CMB experiment, POLARBEAR, located at the A…
▽ More
The polarization of the atmosphere has been a long-standing concern for ground-based experiments targeting cosmic microwave background (CMB) polarization. Ice crystals in upper tropospheric clouds scatter thermal radiation from the ground and produce a horizontally-polarized signal. We report the detailed analysis of the cloud signal using a ground-based CMB experiment, POLARBEAR, located at the Atacama desert in Chile and observing at 150 GHz. We observe horizontally-polarized temporal increases of low-frequency fluctuations ("polarized bursts," hereafter) of $\lesssim$0.1 K when clouds appear in a webcam monitoring the telescope and the sky. The hypothesis of no correlation between polarized bursts and clouds is rejected with $>$24$σ$ statistical significance using three years of data. We consider many other possibilities including instrumental and environmental effects, and find no other reasons other than clouds that can explain the data better. We also discuss the impact of the cloud polarization on future ground-based CMB polarization experiments.
△ Less
Submitted 18 September, 2018;
originally announced September 2018.
-
The Simons Observatory: Science goals and forecasts
Authors:
The Simons Observatory Collaboration,
Peter Ade,
James Aguirre,
Zeeshan Ahmed,
Simone Aiola,
Aamir Ali,
David Alonso,
Marcelo A. Alvarez,
Kam Arnold,
Peter Ashton,
Jason Austermann,
Humna Awan,
Carlo Baccigalupi,
Taylor Baildon,
Darcy Barron,
Nick Battaglia,
Richard Battye,
Eric Baxter,
Andrew Bazarko,
James A. Beall,
Rachel Bean,
Dominic Beck,
Shawn Beckman,
Benjamin Beringue,
Federico Bianchini
, et al. (225 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a new cosmic microwave background experiment being built on Cerro Toco in Chile, due to begin observations in the early 2020s. We describe the scientific goals of the experiment, motivate the design, and forecast its performance. SO will measure the temperature and polarization anisotropy of the cosmic microwave background in six frequency bands: 27, 39, 93, 145, 225…
▽ More
The Simons Observatory (SO) is a new cosmic microwave background experiment being built on Cerro Toco in Chile, due to begin observations in the early 2020s. We describe the scientific goals of the experiment, motivate the design, and forecast its performance. SO will measure the temperature and polarization anisotropy of the cosmic microwave background in six frequency bands: 27, 39, 93, 145, 225 and 280 GHz. The initial configuration of SO will have three small-aperture 0.5-m telescopes (SATs) and one large-aperture 6-m telescope (LAT), with a total of 60,000 cryogenic bolometers. Our key science goals are to characterize the primordial perturbations, measure the number of relativistic species and the mass of neutrinos, test for deviations from a cosmological constant, improve our understanding of galaxy evolution, and constrain the duration of reionization. The SATs will target the largest angular scales observable from Chile, map** ~10% of the sky to a white noise level of 2 $μ$K-arcmin in combined 93 and 145 GHz bands, to measure the primordial tensor-to-scalar ratio, $r$, at a target level of $σ(r)=0.003$. The LAT will map ~40% of the sky at arcminute angular resolution to an expected white noise level of 6 $μ$K-arcmin in combined 93 and 145 GHz bands, overlap** with the majority of the LSST sky region and partially with DESI. With up to an order of magnitude lower polarization noise than maps from the Planck satellite, the high-resolution sky maps will constrain cosmological parameters derived from the dam** tail, gravitational lensing of the microwave background, the primordial bispectrum, and the thermal and kinematic Sunyaev-Zel'dovich effects, and will aid in delensing the large-angle polarization signal to measure the tensor-to-scalar ratio. The survey will also provide a legacy catalog of 16,000 galaxy clusters and more than 20,000 extragalactic sources.
△ Less
Submitted 1 March, 2019; v1 submitted 22 August, 2018;
originally announced August 2018.
-
Fourier Power Function Shapelets (FPFS) Shear Estimator: Performance on Image Simulations
Authors:
Xiangchong Li,
Nobuhiko Katayama,
Masamune Oguri,
Surhud More
Abstract:
We reinterpret the shear estimator developed by Zhang & Komatsu (2011) within the framework of Shapelets and propose the Fourier Power Function Shapelets (FPFS) shear estimator. Four shapelet modes are calculated from the power function of every galaxy's Fourier transform after deconvolving the Point Spread Function (PSF) in Fourier space. We propose a novel normalization scheme to construct dimen…
▽ More
We reinterpret the shear estimator developed by Zhang & Komatsu (2011) within the framework of Shapelets and propose the Fourier Power Function Shapelets (FPFS) shear estimator. Four shapelet modes are calculated from the power function of every galaxy's Fourier transform after deconvolving the Point Spread Function (PSF) in Fourier space. We propose a novel normalization scheme to construct dimensionless ellipticity and its corresponding shear responsivity using these shapelet modes. Shear is measured in a conventional way by averaging the ellipticities and responsivities over a large ensemble of galaxies. With the introduction and tuning of a weighting parameter, noise bias is reduced below one percent of the shear signal. We also provide an iterative method to reduce selection bias. The FPFS estimator is developed without any assumption on galaxy morphology, nor any approximation for PSF correction. Moreover, our method does not rely on heavy image manipulations nor complicated statistical procedures. We test the FPFS shear estimator using several HSC-like image simulations and the main results are listed as follows. (i) For simulations which only contain isolated galaxies, the amplitude of multiplicative bias is below 1 % . (ii) For more realistic simulations which also contain blended galaxies, the blended galaxies are deblended by the first generation HSC deblender before shear measurement. Multiplicative bias of (-5.71 +- 0.31) % is found. The blending bias is calibrated by image simulations. Finally, we test the consistency and stability of this calibration.
△ Less
Submitted 11 October, 2018; v1 submitted 22 May, 2018;
originally announced May 2018.
-
The LiteBIRD Satellite Mission - Sub-Kelvin Instrument
Authors:
A. Suzuki,
P. A. R. Ade,
Y. Akiba,
D. Alonso,
K. Arnold,
J. Aumont,
C. Baccigalupi,
D. Barron,
S. Basak,
S. Beckman,
J. Borrill,
F. Boulanger,
M. Bucher,
E. Calabrese,
Y. Chinone,
H-M. Cho,
A. Cukierman,
D. W. Curtis,
T. de Haan,
M. Dobbs,
A. Dominjon,
T. Dotani,
L. Duband,
A. Ducout,
J. Dunkley
, et al. (127 additional authors not shown)
Abstract:
Inflation is the leading theory of the first instant of the universe. Inflation, which postulates that the universe underwent a period of rapid expansion an instant after its birth, provides convincing explanation for cosmological observations. Recent advancements in detector technology have opened opportunities to explore primordial gravitational waves generated by the inflation through B-mode (d…
▽ More
Inflation is the leading theory of the first instant of the universe. Inflation, which postulates that the universe underwent a period of rapid expansion an instant after its birth, provides convincing explanation for cosmological observations. Recent advancements in detector technology have opened opportunities to explore primordial gravitational waves generated by the inflation through B-mode (divergent-free) polarization pattern embedded in the Cosmic Microwave Background anisotropies. If detected, these signals would provide strong evidence for inflation, point to the correct model for inflation, and open a window to physics at ultra-high energies.
LiteBIRD is a satellite mission with a goal of detecting degree-and-larger-angular-scale B-mode polarization. LiteBIRD will observe at the second Lagrange point with a 400 mm diameter telescope and 2,622 detectors. It will survey the entire sky with 15 frequency bands from 40 to 400 GHz to measure and subtract foregrounds.
The U.S. LiteBIRD team is proposing to deliver sub-Kelvin instruments that include detectors and readout electronics. A lenslet-coupled sinuous antenna array will cover low-frequency bands (40 GHz to 235 GHz) with four frequency arrangements of trichroic pixels. An orthomode-transducer-coupled corrugated horn array will cover high-frequency bands (280 GHz to 402 GHz) with three types of single frequency detectors. The detectors will be made with Transition Edge Sensor (TES) bolometers cooled to a 100 milli-Kelvin base temperature by an adiabatic demagnetization refrigerator.The TES bolometers will be read out using digital frequency multiplexing with Superconducting QUantum Interference Device (SQUID) amplifiers. Up to 78 bolometers will be multiplexed with a single SQUID amplidier.
We report on the sub-Kelvin instrument design and ongoing developments for the LiteBIRD mission.
△ Less
Submitted 15 March, 2018; v1 submitted 22 January, 2018;
originally announced January 2018.
-
A wide field-of-view crossed Dragone optical system using the anamorphic aspherical surfaces
Authors:
Shingo Kashima,
Masashi Hazumi,
Hiroaki Imada,
Nobuhiko Katayama,
Tomotake Matsumura,
Yutaro Sekimoto,
Hajime Sugai
Abstract:
A side-fed crossed Dragone telescope provides a wide field-of-view. This type of a telescope is commonly employed in the measurement of cosmic microwave background (CMB) polarization, which requires an image-space telecentric telescope with a large focal plane over broadband coverage. We report the design of the wide field-of-view crossed Dragone optical system using the anamorphic aspherical surf…
▽ More
A side-fed crossed Dragone telescope provides a wide field-of-view. This type of a telescope is commonly employed in the measurement of cosmic microwave background (CMB) polarization, which requires an image-space telecentric telescope with a large focal plane over broadband coverage. We report the design of the wide field-of-view crossed Dragone optical system using the anamorphic aspherical surfaces with correction terms up to the 10th order. We achieved the Strehl ratio larger than 0.95 over 32 by 18 square degrees at 150 GHz. This design is an image-space telecentric and fully diffraction-limited system below 400 GHz. We discuss the optical performance in the uniformity of the axially symmetric point spread function and telecentricity over the field-of-view. We also address the analysis to evaluate the polarization properties, including the instrumental polarization, extinction rate, and polarization angle rotation. This work is a part of programs to design a compact multi-color wide field-of-view telescope for LiteBIRD, which is a next generation CMB polarization satellite.
△ Less
Submitted 5 June, 2018; v1 submitted 14 December, 2017;
originally announced December 2017.
-
Finding the chiral gravitational wave background of an axion-SU(2) inflationary model using CMB observations and laser interferometers
Authors:
Ben Thorne,
Tomohiro Fujita,
Masashi Hazumi,
Nobuhiko Katayama,
Eiichiro Komatsu,
Maresuke Shiraishi
Abstract:
A detection of B-mode polarization of the Cosmic Microwave Background (CMB) anisotropies would confirm the presence of a primordial gravitational wave background (GWB). In the inflation paradigm this would be an unprecedented probe of the energy scale of inflation as it is directly proportional to the power spectrum of the GWB. However, similar tensor perturbations can be produced by the matter fi…
▽ More
A detection of B-mode polarization of the Cosmic Microwave Background (CMB) anisotropies would confirm the presence of a primordial gravitational wave background (GWB). In the inflation paradigm this would be an unprecedented probe of the energy scale of inflation as it is directly proportional to the power spectrum of the GWB. However, similar tensor perturbations can be produced by the matter fields present during inflation, breaking this simple relationship. It is therefore important to be able to distinguish between different generation mechanisms of the GWB. In this paper, we analyse the detectability of a new axion-SU(2) gauge field model using its chiral, scale-dependent tensor spectrum. We forecast the detectability of the resulting CMB TB and EB cross-correlations by the LiteBIRD satellite, considering the effects of residual foregrounds, gravitational lensing, and for the first time assess the ability of such an experiment to jointly detect primordial TB and EB spectra and self-calibrate its polarimeter. We find that LiteBIRD will be able to detect the chiral signal for $r_*>0.03$ with $r_*$ denoting the tensor-to-scalar ratio at the peak scale, and that the maximum signal-to-noise for $r_*<0.07$ is $\sim 2$. We go on to consider an advanced stage of a LISA-like mission, and find that such experiments would complement CMB observations by providing sensitivity to GWB chirality on scales inaccessible to the CMB. We conclude that in order to use the CMB to distinguish this model from a conventional vacuum fluctuation model two-point statistics provide some power, but to achieve high statistical significance we would require higher order statistics which take advantage of the model's non-Gaussianity. On the other hand, in the case of a spectrum peaked at very small scales, inaccessible to the CMB, a highly significant detection could be made using space-based laser interferometers.
△ Less
Submitted 15 January, 2018; v1 submitted 11 July, 2017;
originally announced July 2017.
-
A Measurement of the Cosmic Microwave Background $B$-Mode Polarization Power Spectrum at Sub-Degree Scales from 2 years of POLARBEAR Data
Authors:
The POLARBEAR Collaboration,
P. A. R. Ade,
M. Aguilar,
Y. Akiba,
K. Arnold,
C. Baccigalupi,
D. Barron,
D. Beck,
F. Bianchini,
D. Boettger,
J. Borrill,
S. Chapman,
Y. Chinone,
K. Crowley,
A. Cukierman,
M. Dobbs,
A. Ducout,
R. Dünner,
T. Elleflot,
J. Errard,
G. Fabbian,
S. M. Feeney,
C. Feng,
T. Fu**o,
N. Galitzki
, et al. (57 additional authors not shown)
Abstract:
We report an improved measurement of the cosmic microwave background (CMB) $B$-mode polarization power spectrum with the POLARBEAR experiment at 150 GHz. By adding new data collected during the second season of observations (2013-2014) to re-analyzed data from the first season (2012-2013), we have reduced twofold the band-power uncertainties. The band powers are reported over angular multipoles…
▽ More
We report an improved measurement of the cosmic microwave background (CMB) $B$-mode polarization power spectrum with the POLARBEAR experiment at 150 GHz. By adding new data collected during the second season of observations (2013-2014) to re-analyzed data from the first season (2012-2013), we have reduced twofold the band-power uncertainties. The band powers are reported over angular multipoles $500 \leq \ell \leq 2100$, where the dominant $B$-mode signal is expected to be due to the gravitational lensing of $E$-modes. We reject the null hypothesis of no $B$-mode polarization at a confidence of 3.1$σ$ including both statistical and systematic uncertainties. We test the consistency of the measured $B$-modes with the $Λ$ Cold Dark Matter ($Λ$CDM) framework by fitting for a single lensing amplitude parameter $A_L$ relative to the Planck best-fit model prediction. We obtain $A_L = 0.60 ^{+0.26} _{-0.24} ({\rm stat}) ^{+0.00} _{-0.04}({\rm inst}) \pm 0.14 ({\rm foreground}) \pm 0.04 ({\rm multi})$, where $A_{L}=1$ is the fiducial $Λ$CDM value, and the details of the reported uncertainties are explained later in the manuscript.
△ Less
Submitted 27 October, 2017; v1 submitted 8 May, 2017;
originally announced May 2017.
-
The Hyper Suprime-Cam SSP Survey: Overview and Survey Design
Authors:
H. Aihara,
N. Arimoto,
R. Armstrong,
S. Arnouts,
N. A. Bahcall,
S. Bickerton,
J. Bosch,
K. Bundy,
P. L. Capak,
J. H. H. Chan,
M. Chiba,
J. Coupon,
E. Egami,
M. Enoki,
F. Finet,
H. Fujimori,
S. Fujimoto,
H. Furusawa,
J. Furusawa,
T. Goto,
A. Goulding,
J. P. Greco,
J. E. Greene,
J. E. Gunn,
T. Hamana
, et al. (118 additional authors not shown)
Abstract:
Hyper Suprime-Cam (HSC) is a wide-field imaging camera on the prime focus of the 8.2m Subaru telescope on the summit of Maunakea in Hawaii. A team of scientists from Japan, Taiwan and Princeton University is using HSC to carry out a 300-night multi-band imaging survey of the high-latitude sky. The survey includes three layers: the Wide layer will cover 1400 deg$^2$ in five broad bands ($grizy$), w…
▽ More
Hyper Suprime-Cam (HSC) is a wide-field imaging camera on the prime focus of the 8.2m Subaru telescope on the summit of Maunakea in Hawaii. A team of scientists from Japan, Taiwan and Princeton University is using HSC to carry out a 300-night multi-band imaging survey of the high-latitude sky. The survey includes three layers: the Wide layer will cover 1400 deg$^2$ in five broad bands ($grizy$), with a $5\,σ$ point-source depth of $r \approx 26$. The Deep layer covers a total of 26~deg$^2$ in four fields, going roughly a magnitude fainter, while the UltraDeep layer goes almost a magnitude fainter still in two pointings of HSC (a total of 3.5 deg$^2$). Here we describe the instrument, the science goals of the survey, and the survey strategy and data processing. This paper serves as an introduction to a special issue of the Publications of the Astronomical Society of Japan, which includes a large number of technical and scientific papers describing results from the early phases of this survey.
△ Less
Submitted 15 March, 2018; v1 submitted 19 April, 2017;
originally announced April 2017.
-
First Data Release of the Hyper Suprime-Cam Subaru Strategic Program
Authors:
Hiroaki Aihara,
Robert Armstrong,
Steven Bickerton,
James Bosch,
Jean Coupon,
Hisanori Furusawa,
Yusuke Hayashi,
Hiroyuki Ikeda,
Yukiko Kamata,
Hiroshi Karoji,
Satoshi Kawanomoto,
Michitaro Koike,
Yutaka Komiyama,
Robert H. Lupton,
Sogo Mineo,
Hironao Miyatake,
Satoshi Miyazaki,
Tomoki Morokuma,
Yoshiyuki Obuchi,
Yukie Oishi,
Yuki Okura,
Paul A. Price,
Tadafumi Takata,
Manobu M. Tanaka,
Masayuki Tanaka
, et al. (83 additional authors not shown)
Abstract:
The Hyper Suprime-Cam Subaru Strategic Program (HSC-SSP) is a three-layered imaging survey aimed at addressing some of the most outstanding questions in astronomy today, including the nature of dark matter and dark energy. The survey has been awarded 300 nights of observing time at the Subaru Telescope and it started in March 2014. This paper presents the first public data release of HSC-SSP. This…
▽ More
The Hyper Suprime-Cam Subaru Strategic Program (HSC-SSP) is a three-layered imaging survey aimed at addressing some of the most outstanding questions in astronomy today, including the nature of dark matter and dark energy. The survey has been awarded 300 nights of observing time at the Subaru Telescope and it started in March 2014. This paper presents the first public data release of HSC-SSP. This release includes data taken in the first 1.7 years of observations (61.5 nights) and each of the Wide, Deep, and UltraDeep layers covers about 108, 26, and 4 square degrees down to depths of i~26.4, ~26.5, and ~27.0 mag, respectively (5sigma for point sources). All the layers are observed in five broad bands (grizy), and the Deep and UltraDeep layers are observed in narrow bands as well. We achieve an impressive image quality of 0.6 arcsec in the i-band in the Wide layer. We show that we achieve 1-2 per cent PSF photometry (rms) both internally and externally (against Pan-STARRS1), and ~10 mas and 40 mas internal and external astrometric accuracy, respectively. Both the calibrated images and catalogs are made available to the community through dedicated user interfaces and database servers. In addition to the pipeline products, we also provide value-added products such as photometric redshifts and a collection of public spectroscopic redshifts. Detailed descriptions of all the data can be found online. The data release website is https://hsc-release.mtk.nao.ac.jp/.
△ Less
Submitted 28 July, 2017; v1 submitted 27 February, 2017;
originally announced February 2017.
-
Performance of a continuously rotating half-wave plate on the POLARBEAR telescope
Authors:
Satoru Takakura,
Mario Aguilar,
Yoshiki Akiba,
Kam Arnold,
Carlo Baccigalupi,
Darcy Barron,
Shawn Beckman,
David Boettger,
Julian Borrill,
Scott Chapman,
Yuji Chinone,
Ari Cukierman,
Anne Ducout,
Tucker Elleflot,
Josquin Errard,
Giulio Fabbian,
Takuro Fu**o,
Nicholas Galitzki,
Neil Goeckner-Wald,
Nils W. Halverson,
Masaya Hasegawa,
Kaori Hattori,
Masashi Hazumi,
Charles Hill,
Logan Howe
, et al. (28 additional authors not shown)
Abstract:
A continuously rotating half-wave plate (CRHWP) is a promising tool to improve the sensitivity to large angular scales in cosmic microwave background (CMB) polarization measurements. With a CRHWP, single detectors can measure three of the Stokes parameters, $I$, $Q$ and $U$, thereby avoiding the set of systematic errors that can be introduced by mismatches in the properties of orthogonal detector…
▽ More
A continuously rotating half-wave plate (CRHWP) is a promising tool to improve the sensitivity to large angular scales in cosmic microwave background (CMB) polarization measurements. With a CRHWP, single detectors can measure three of the Stokes parameters, $I$, $Q$ and $U$, thereby avoiding the set of systematic errors that can be introduced by mismatches in the properties of orthogonal detector pairs. We focus on the implementation of CRHWPs in large aperture telescopes (i.e. the primary mirror is larger than the current maximum half-wave plate diameter of $\sim$0.5 m), where the CRHWP can be placed between the primary mirror and focal plane. In this configuration, one needs to address the intensity to polarization ($I{\rightarrow}P$) leakage of the optics, which becomes a source of 1/f noise and also causes differential gain systematics that arise from CMB temperature fluctuations. In this paper, we present the performance of a CRHWP installed in the POLARBEAR experiment, which employs a Gregorian telescope with a 2.5 m primary illumination pattern. The CRHWP is placed near the prime focus between the primary and secondary mirrors. We find that the $I{\rightarrow}P$ leakage is larger than the expectation from the physical properties of our primary mirror, resulting in a 1/f knee of 100 mHz. The excess leakage could be due to imperfections in the detector system, i.e. detector non-linearity in the responsivity and time-constant. We demonstrate, however, that by subtracting the leakage correlated with the intensity signal, the 1/f noise knee frequency is reduced to 32 mHz ($\ell \sim$39 for our scan strategy), which is very promising to probe the primordial B-mode signal. We also discuss methods for further noise subtraction in future projects where the precise temperature control of instrumental components and the leakage reduction will play a key role.
△ Less
Submitted 27 May, 2017; v1 submitted 23 February, 2017;
originally announced February 2017.
-
POLARBEAR-2: an instrument for CMB polarization measurements
Authors:
Y. Inoue,
P. Ade,
Y. Akiba,
C. Aleman,
K. Arnold,
C. Baccigalupi,
B. Barch,
D. Barron,
A. Bender,
D. Boettger,
J. Borrill,
S. Chapman,
Y. Chinone,
A. Cukierman,
T. de Haan,
M. A. Dobbs,
A. Ducout,
R. Dunner,
T. Elleflot,
J. Errard,
G. Fabbian,
S. Feeney,
C. Feng,
G. Fuller,
A. J. Gilbert
, et al. (61 additional authors not shown)
Abstract:
POLARBEAR-2 (PB-2) is a cosmic microwave background (CMB) polarization experiment that will be located in the Atacama highland in Chile at an altitude of 5200 m. Its science goals are to measure the CMB polarization signals originating from both primordial gravitational waves and weak lensing. PB-2 is designed to measure the tensor to scalar ratio, r, with precision σ(r) < 0.01, and the sum of neu…
▽ More
POLARBEAR-2 (PB-2) is a cosmic microwave background (CMB) polarization experiment that will be located in the Atacama highland in Chile at an altitude of 5200 m. Its science goals are to measure the CMB polarization signals originating from both primordial gravitational waves and weak lensing. PB-2 is designed to measure the tensor to scalar ratio, r, with precision σ(r) < 0.01, and the sum of neutrino masses, Σmν, with σ(Σmν) < 90 meV. To achieve these goals, PB-2 will employ 7588 transition-edge sensor bolometers at 95 GHz and 150 GHz, which will be operated at the base temperature of 250 mK. Science observations will begin in 2017.
△ Less
Submitted 9 August, 2016;
originally announced August 2016.
-
Making maps of Cosmic Microwave Background polarization for B-mode studies: the POLARBEAR example
Authors:
Davide Poletti,
Giulio Fabbian,
Maude Le Jeune,
Julien Peloton,
Kam Arnold,
Carlo Baccigalupi,
Darcy Barron,
Shawn Beckman,
Julian Borrill,
Scott Chapman,
Yuji Chinone,
Ari Cukierman,
Anne Ducout,
Tucker Elleflot,
Josquin Errard,
Stephen Feeney,
Neil Goeckner-Wald,
John Groh,
Grantland Hall,
Masaya Hasegawa,
Masashi Hazumi,
Charles Hill,
Logan Howe,
Yuki Inoue,
Andrew H. Jaffe
, et al. (24 additional authors not shown)
Abstract:
Analysis of cosmic microwave background (CMB) datasets typically requires some filtering of the raw time-ordered data. Filtering is frequently used to minimize the impact of low frequency noise, atmospheric contributions and/or scan synchronous signals on the resulting maps. In this work we explicitly construct a general filtering operator, which can unambiguously remove any set of unwanted modes…
▽ More
Analysis of cosmic microwave background (CMB) datasets typically requires some filtering of the raw time-ordered data. Filtering is frequently used to minimize the impact of low frequency noise, atmospheric contributions and/or scan synchronous signals on the resulting maps. In this work we explicitly construct a general filtering operator, which can unambiguously remove any set of unwanted modes in the data, and then amend the map-making procedure in order to incorporate and correct for it. We show that such an approach is mathematically equivalent to the solution of a problem in which the sky signal and unwanted modes are estimated simultaneously and the latter are marginalized over. We investigate the conditions under which this amended map-making procedure can render an unbiased estimate of the sky signal in realistic circumstances. We then study the effects of time-domain filtering on the noise correlation structure in the map domain, as well as impact it may have on the performance of the popular pseudo-spectrum estimators. We conclude that although maps produced by the proposed estimators arguably provide the most faithful representation of the sky possible given the data, they may not straightforwardly lead to the best constraints on the power spectra of the underlying sky signal and special care may need to be taken to ensure this is the case. By contrast, simplified map-makers which do not explicitly correct for time-domain filtering, but leave it to subsequent steps in the data analysis, may perform equally well and be easier and faster to implement. We focus on polarization-sensitive measurements targeting the B-mode component of the CMB signal and apply the proposed methods to realistic simulations based on characteristics of an actual CMB polarization experiment, POLARBEAR.
△ Less
Submitted 27 December, 2016; v1 submitted 3 August, 2016;
originally announced August 2016.