-
Effect of projectile shape and interior structure on crater size in strength regime
Authors:
T. Kadono,
M. Arakawa,
S. Tsujido,
M. Yasui,
S. Hasegawa,
K. Kurosawa,
K. Shirai,
C. Okamoto,
K. Ogawa,
Y. Iijima,
Y. Shimaki,
K. Wada
Abstract:
Experiments on crater formation in the strength regime were conducted using projectiles of various shapes with an aspect ratio of ~1, including both solid and hollow interiors. The surface diameter, inner (pit) diameter, and depth of the craters on basalt and porous gypsum targets were measured. Using the bulk density of the projectile, the surface diameter and depth for basalt and the pit diamete…
▽ More
Experiments on crater formation in the strength regime were conducted using projectiles of various shapes with an aspect ratio of ~1, including both solid and hollow interiors. The surface diameter, inner (pit) diameter, and depth of the craters on basalt and porous gypsum targets were measured. Using the bulk density of the projectile, the surface diameter and depth for basalt and the pit diameter and depth for porous gypsum were scaled using the pi-scaling law for crater formation in the strength regime. The numerical code iSALE was used to simulate the impact of projectiles of various shapes and interior structure with similar bulk densities. Results show that the distributions of the maximum (peak) pressure experienced and particle velocity in the targets were similar regardless of projectile shape and interior structure, implying that the dimensions of the final craters were almost identical. This is consistent with the experimental results. Thus, we conclude that the size of the craters formed by the impact of projectiles with different shape and interior structure can be scaled using a conventional scaling law in the strength regime, using bulk density as projectile density.
△ Less
Submitted 24 August, 2022;
originally announced August 2022.
-
Crater-ray formation through mutual collisions of hypervelocity-impact induced ejecta particles
Authors:
Toshihiko Kadono,
Ayako I. Suzuki,
Rintaro Matsumura,
Junta Naka,
Ryo Suetsugu,
Kosuke Kurosawa,
Sunao Hasegawa
Abstract:
We investigate the patterns observed in ejecta curtain induced by hypervelocity impact (2-6 km/s) with a variety of the size and shape of target particles. We characterize the patterns by an angle, defined as the ratio of the characteristic length of the pattern obtained by Fourier transformation to the distance from the impact point. This angle is found to be almost the same as that obtained by t…
▽ More
We investigate the patterns observed in ejecta curtain induced by hypervelocity impact (2-6 km/s) with a variety of the size and shape of target particles. We characterize the patterns by an angle, defined as the ratio of the characteristic length of the pattern obtained by Fourier transformation to the distance from the impact point. This angle is found to be almost the same as that obtained by the reanalysis of the patterns in the previous study at lower impact velocities (Kadono et al., 2015, Icarus 250, 215-221), which are consistent with lunar crater-ray systems. Assuming that the pattern is formed by mutual collision of particles with fluctuation velocity in excavation flow, we evaluate an angle at which the pattern growth stops and show that this angle is the same in the order of magnitude as the ratio of the fluctuation velocity and the radial velocity. This relation is confirmed in the results of experiments and numerical simulations. Finally, we discuss the dependence of the patterns on impact conditions. The experiments show no dependence of the angle on impact velocity. This indicates that the ratio between the fluctuation and radial velocity components in excavation flow does not depend on impact velocity. Moreover, the independences on particle size and particle shape suggest that the angle characterizing the structure of the patterns does not depend on cohesive force. Since cohesive forces should be related with elastic properties of particles, the structure does not depend on elastic properties, though inelastic collisions are important for the persistence and contrast of the patterns.
△ Less
Submitted 18 December, 2019;
originally announced December 2019.
-
Pattern of Impact-Induced Ejecta from Granular Targets with Large Inclusions
Authors:
Toshihiko Kadono,
Ryo Suetsugu,
Dai Arakawa,
Yoshiki Kasagi,
Syuichi Nagayama,
Ayako I. Suzuki,
Sunao Hasegawa
Abstract:
We performed impact experiments to observe patterns in an ejecta curtain with targets consisting of small sand particles and large inclusions comparable to or smaller than the size of the projectiles. The spatial intensity distributions in the ejecta at early stages of crater formation depend on the size of the inclusions. Our numerical simulations of radially spreading particles with different si…
▽ More
We performed impact experiments to observe patterns in an ejecta curtain with targets consisting of small sand particles and large inclusions comparable to or smaller than the size of the projectiles. The spatial intensity distributions in the ejecta at early stages of crater formation depend on the size of the inclusions. Our numerical simulations of radially spreading particles with different sizes support this result. Based on the results, we proposed a procedure for evaluating the subsurface structures of celestial bodies from the images of ejecta curtains obtained from space-impact experiments.
△ Less
Submitted 11 July, 2019;
originally announced July 2019.
-
Increase in cratering efficiency with target curvature in strength-controlled craters
Authors:
Ayako I. Suzuki,
Chisato Okamoto,
Kosuke Kurosawa,
Toshihiko Kadono,
Sunao Hasegawa,
Takayuki Hirai
Abstract:
Impact-cratering processes on small bodies are thought to be mainly controlled by the local material strength because of their low surface gravity, and craters that are as large as the parent bodies should be affected by the target curvature. Although cratering processes on planar surfaces in the strength-controlled regime have been studied extensively, the mechanism by which target curvature affe…
▽ More
Impact-cratering processes on small bodies are thought to be mainly controlled by the local material strength because of their low surface gravity, and craters that are as large as the parent bodies should be affected by the target curvature. Although cratering processes on planar surfaces in the strength-controlled regime have been studied extensively, the mechanism by which target curvature affects the cratering processes remains unclear. Herein, we report on a series of impact experiments that used spherical targets with various diameters. The resultant craters consisted of a deep circular pit and an irregular-shaped spall region around the pit, which is consistent with the features reported in a number of previous cratering experiments on planar surfaces. However, the volume and radius of the craters increased with the normalized curvature. The results indicate that the increase in the spall-region volume and radius mainly contributes to the increase in the whole crater volume and radius, although the volume, depth, and radius of pits remain constant with curvature. The results of our model indicate that the geometric effect due to curvature (i.e., whereby the distance from the equivalent center to the target free surface is shorter for higher curvature values) contributes to increases in the cratering efficiency. Our results suggest that the impactors that produce the largest craters (basins) on some asteroids are thus smaller than what is estimated by current scaling laws, which do not take into account the curvature effects.
△ Less
Submitted 20 October, 2017;
originally announced October 2017.
-
Recovery of entire shocked samples in a range of pressure from ~100 GPa to Hugoniot Elastic Limit
Authors:
Keita Nagaki,
Toshihiko Kadono,
Tatsuhiro Sakaiya,
Tadashi Kondo,
Kosuke Kurosawa,
Yoichiro Hironaka,
Keisuke Shigemori,
Masahiko Arakawa
Abstract:
We carried out laser shock experiments and wholly recovered shocked olivine and quartz samples. We investigated the petrographic features based on optical micrographs of sliced samples and found that each recovered sample comprises three regions, I (optically dark), II (opaque) and III (transparent). Scanning electron microscopy combined with electron back-scattered diffraction shows that there ar…
▽ More
We carried out laser shock experiments and wholly recovered shocked olivine and quartz samples. We investigated the petrographic features based on optical micrographs of sliced samples and found that each recovered sample comprises three regions, I (optically dark), II (opaque) and III (transparent). Scanning electron microscopy combined with electron back-scattered diffraction shows that there are no crystal features in the region I; the materials in the region I have once melted. Moreover, numerical calculations performed with the iSALE shock physics code suggest that the boundary between regions II and III corresponds to Hugoniot Elastic Limit (HEL). Thus, we succeeded in the recovery of the entire shocked samples experienced over a wide range of pressures from HEL (~ 10 GPa) to melting pressure (~ 100 GPa) in a hierarchical order.
△ Less
Submitted 21 April, 2016;
originally announced April 2016.
-
Laser-Shock Compression and Hugoniot Measurements of Liquid Hydrogen to 55 GPa
Authors:
T. Sano,
N. Ozaki,
T. Sakaiya,
K. Shigemori,
M. Ikoma,
T. Kimura,
K. Miyanishi,
T. Endo,
A. Shiroshita,
H. Takahashi,
T. Jitsui,
Y. Hori,
Y. Hironaka,
A. Iwamoto,
T. Kadono,
M. Nakai,
T. Okuchi,
K. Otani,
K. Shimizu,
T. Kondo,
R. Kodama,
K. Mima
Abstract:
The principal Hugoniot for liquid hydrogen was obtained up to 55 GPa under laser-driven shock loading. Pressure and density of compressed hydrogen were determined by impedance-matching to a quartz standard. The shock temperature was independently measured from the brightness of the shock front. Hugoniot data of hydrogen provide a good benchmark to modern theories of condensed matter. The initial n…
▽ More
The principal Hugoniot for liquid hydrogen was obtained up to 55 GPa under laser-driven shock loading. Pressure and density of compressed hydrogen were determined by impedance-matching to a quartz standard. The shock temperature was independently measured from the brightness of the shock front. Hugoniot data of hydrogen provide a good benchmark to modern theories of condensed matter. The initial number density of liquid hydrogen is lower than that for liquid deuterium, and this results in shock compressed hydrogen having a higher compression and higher temperature than deuterium at the same shock pressure.
△ Less
Submitted 6 January, 2011;
originally announced January 2011.
