-
A physical optics characterization of the beam shape and sidelobe levels for the Atacama Large Aperture Submillimeter Telescope (AtLAST)
Authors:
Roberto Puddu,
Patricio A. Gallardo,
Tony Mroczkowski,
Pierre Dubois-dit-Bonclaude,
Manuel Groh,
Aleksej Kiselev,
Matthias Reichert,
Martin Timpe,
Claudia Cicone,
Hans J. Kaercher,
Rolando Dünner
Abstract:
(abridged) The Atacama Large Aperture Submillimeter Telescope (AtLAST) is undergoing a design study for a large (50 meter) single-dish submm-wavelength Ritchey-Chrétien telescope to be located 5050 meters above sea level in the Atacama Desert in northern Chile. It will allow for observations covering 30 to 950 GHz. Observing at such high frequencies with a 50~m primary mirror will be challenging,…
▽ More
(abridged) The Atacama Large Aperture Submillimeter Telescope (AtLAST) is undergoing a design study for a large (50 meter) single-dish submm-wavelength Ritchey-Chrétien telescope to be located 5050 meters above sea level in the Atacama Desert in northern Chile. It will allow for observations covering 30 to 950 GHz. Observing at such high frequencies with a 50~m primary mirror will be challenging, and has never been attempted thus far. This observational capability demands exquisite control of systematics to ensure a reliable beam shape, and to mitigate the expected sidelobe levels. Among them, critical issues that large telescopes like AtLAST need to deal with are introduced by the panel gap pattern, the secondary mirror supporting struts, mirror deformations produced by thermal and gravitational effects, and Ruze scattering due to surface roughness. Proprietary software such as TICRA-Tools allows for full-wave, complex-field physical optics simulations taking into account these features. Such calculations can be computationally expensive since the mirror surfaces are gridded (meshed) into a fine array in which each element is treated as a current source. If the telescope size is large and the wavelengths are short this may lead to very long running times. Here we present a set of physical optics results that allow us to estimate the performance of the telescope in terms of beam shape, directivity, sidelobes level and stray light. We also discuss how we addressed the computational challenges, and provide caveats on how to shorten the run times. Above all, we conclude that the scattering effects from the gaps and tertiary support structure are minimal, and subdominant to the Ruze scattering.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
The Optical Design Concept for the Atacama Large Aperture Submillimeter Telescope (AtLAST)
Authors:
Patricio A. Gallardo,
Roberto Puddu,
Tony Mroczkowski,
Martin Timpe,
Pierre Dubois-dit-Bonclaude,
Manuel Groh,
Matthias Reichert,
Claudia Cicone,
Hans J. Kaercher
Abstract:
The Atacama Large Aperture Submillimeter Telescope (AtLAST) aims to be the premier next generation large diameter (50-meter) single dish observatory capable of observations across the millimeter/sub-millimeter spectrum, from 30 to 950~GHz. The large primary mirror diameter, the 2-degree field of view and its large 4.7-meter focal surface give AtLAST a high throughput (aperture size times field of…
▽ More
The Atacama Large Aperture Submillimeter Telescope (AtLAST) aims to be the premier next generation large diameter (50-meter) single dish observatory capable of observations across the millimeter/sub-millimeter spectrum, from 30 to 950~GHz. The large primary mirror diameter, the 2-degree field of view and its large 4.7-meter focal surface give AtLAST a high throughput (aperture size times field of view) and grasp (throughput times spectral reach), with the ability to illuminate $>\mathcal{O}(10^7)$ detectors. The optical design concept for AtLAST consists of a numerically optimized two-mirror Ritchey-Chrétien system with an additional flat folding mirror, which enables a quick selection among its planned six instrument positions. We present the optical design concept and discuss the expected optical performance of AtLAST. We then present design concepts that can be implemented in the receiver and instrument optics to correct for astigmatism and mitigate the high degree of curvature of the focal surface in order to recover significant fractions of the geometric field of view at sub-millimeter wavelengths.
△ Less
Submitted 17 June, 2024;
originally announced June 2024.
-
The Qitai Radio Telescope
Authors:
Na Wang,
Qian Xu,
Jun Ma,
Zhiyong Liu,
Qi Liu,
Hailong Zhang,
Xin Pei,
Maozheng Chen,
Richard N. Manchester,
Kejia Lee,
Xingwu Zheng,
Hans J. Kärcher,
Wulin Zhao,
Hongwei Li,
Dongwei Li,
Martin Süss,
Matthias Reichert,
Zhongyi Zhu,
Congsi Wang,
Mingshuai Li,
Rui Li,
Ning Li,
Guljaina Kazezkhan,
Wenming Yan,
Gang Wu
, et al. (3 additional authors not shown)
Abstract:
This study presents a general outline of the Qitai radio telescope (QTT) project. Qitai, the site of the telescope, is a county of Xinjiang Uygur Autonomous Region of China, located in the east Tianshan Mountains at an elevation of about 1800 m. The QTT is a fully steerable, Gregorian type telescope with a standard parabolic main reflector of 110 m diameter. The QTT has adopted an um-brella suppor…
▽ More
This study presents a general outline of the Qitai radio telescope (QTT) project. Qitai, the site of the telescope, is a county of Xinjiang Uygur Autonomous Region of China, located in the east Tianshan Mountains at an elevation of about 1800 m. The QTT is a fully steerable, Gregorian type telescope with a standard parabolic main reflector of 110 m diameter. The QTT has adopted an um-brella support, homology-symmetric lightweight design. The main reflector is active so that the deformation caused by gravity can be corrected. The structural design aims to ultimately allow high-sensitivity observations from 150 MHz up to 115 GHz. To satisfy the requirements for early scientific goals, the QTT will be equipped with ultra-wideband receivers and large field-of-view mul-ti-beam receivers. A multi-function signal-processing system based on RFSoC and GPU processor chips will be developed. These will enable the QTT to operate in pulsar, spectral line, continuum and Very Long Baseline Interferometer (VLBI) observing modes. Electromagnetic compatibility (EMC) and radio frequency interference (RFI) control techniques are adopted throughout the system design. The QTT will form a world-class observational platform for the detection of low-frequency (nanoHertz) gravitational waves through pulsar timing array (PTA) techniques, pulsar surveys, the discovery of binary black-hole systems, and exploring dark matter and the origin of life in the universe.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.