Showing 1–8 of 8 results for author: Jansweijer, P

The Power Board of the KM3NeT Digital Optical Module: design, upgrade, and production

Authors: S. Aiello, A. Albert, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, E. Androutsou, M. Anguita, L. Aphecetche, M. Ardid, S. Ardid, H. Atmani, J. Aublin, F. Badaracco, L. Bailly-Salins, Z. Bardacova, B. Baret, A. Bariego Quintana, S. Basegmez du Pree, Y. Becherini, M. Bendahman, F. Benfenati, M. Benhassi, D. M. Benoit , et al. (259 additional authors not shown)

Abstract: The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant gl… ▽ More The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant glass sphere. The module includes also calibration instruments and electronics for power, readout and data acquisition. The power board was developed to supply power to all the elements of the digital optical module. The design of the power board began in 2013, and several prototypes were produced and tested. After an exhaustive validation process in various laboratories within the KM3NeT Collaboration, a mass production batch began, resulting in the construction of over 1200 power boards so far. These boards were integrated in the digital optical modules that have already been produced and deployed, 828 until October 2023. In 2017, an upgrade of the power board, to increase reliability and efficiency, was initiated. After the validation of a pre-production series, a production batch of 800 upgraded boards is currently underway. This paper describes the design, architecture, upgrade, validation, and production of the power board, including the reliability studies and tests conducted to ensure the safe operation at the bottom of the Mediterranean Sea throughout the observatory's lifespan △ Less

Submitted 24 November, 2023; originally announced November 2023.

Embedded Software of the KM3NeT Central Logic Board

Authors: S. Aiello, A. Albert, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, E. Androutsou, M. Anghinolfi, M. Anguita, L. Aphecetche, M. Ardid, S. Ardid, H. Atmani, J. Aublin, C. Bagatelas, L. Bailly-Salins, Z. Bardačová, B. Baret, S. Basegmez du Pree, Y. Becherini, M. Bendahman, F. Benfenati, M. Benhassi, D. M. Benoit , et al. (249 additional authors not shown)

Abstract: The KM3NeT Collaboration is building and operating two deep sea neutrino telescopes at the bottom of the Mediterranean Sea. The telescopes consist of latices of photomultiplier tubes housed in pressure-resistant glass spheres, called digital optical modules and arranged in vertical detection units. The two main scientific goals are the determination of the neutrino mass ordering and the discovery… ▽ More The KM3NeT Collaboration is building and operating two deep sea neutrino telescopes at the bottom of the Mediterranean Sea. The telescopes consist of latices of photomultiplier tubes housed in pressure-resistant glass spheres, called digital optical modules and arranged in vertical detection units. The two main scientific goals are the determination of the neutrino mass ordering and the discovery and observation of high-energy neutrino sources in the Universe. Neutrinos are detected via the Cherenkov light, which is induced by charged particles originated in neutrino interactions. The photomultiplier tubes convert the Cherenkov light into electrical signals that are acquired and timestamped by the acquisition electronics. Each optical module houses the acquisition electronics for collecting and timestam** the photomultiplier signals with one nanosecond accuracy. Once finished, the two telescopes will have installed more than six thousand optical acquisition nodes, completing one of the more complex networks in the world in terms of operation and synchronization. The embedded software running in the acquisition nodes has been designed to provide a framework that will operate with different hardware versions and functionalities. The hardware will not be accessible once in operation, which complicates the embedded software architecture. The embedded software provides a set of tools to facilitate remote manageability of the deployed hardware, including safe reconfiguration of the firmware. This paper presents the architecture and the techniques, methods and implementation of the embedded software running in the acquisition nodes of the KM3NeT neutrino telescopes. △ Less

Submitted 12 October, 2023; v1 submitted 2 August, 2023; originally announced August 2023.

ETpathfinder: a cryogenic testbed for interferometric gravitational-wave detectors

Authors: A. Utina, A. Amato, J. Arends, C. Arina, M. de Baar, M. Baars, P. Baer, N. van Bakel, W. Beaumont, A. Bertolini, M. van Beuzekom, S. Biersteker, A. Binetti, H. J. M. ter Brake, G. Bruno, J. Bryant, H. J. Bulten, L. Busch, P. Cebeci, C. Collette, S. Cooper, R. Cornelissen, P. Cuijpers, M. van Dael, S. Danilishin , et al. (90 additional authors not shown)

Abstract: The third-generation of gravitational wave observatories, such as the Einstein Telescope (ET) and Cosmic Explorer (CE), aim for an improvement in sensitivity of at least a factor of ten over a wide frequency range compared to the current advanced detectors. In order to inform the design of the third-generation detectors and to develop and qualify their subsystems, dedicated test facilities are req… ▽ More The third-generation of gravitational wave observatories, such as the Einstein Telescope (ET) and Cosmic Explorer (CE), aim for an improvement in sensitivity of at least a factor of ten over a wide frequency range compared to the current advanced detectors. In order to inform the design of the third-generation detectors and to develop and qualify their subsystems, dedicated test facilities are required. ETpathfinder prototype uses full interferometer configurations and aims to provide a high sensitivity facility in a similar environment as ET. Along with the interferometry at 1550 nm and silicon test masses, ETpathfinder will focus on cryogenic technologies, lasers and optics at 2090 nm and advanced quantum-noise reduction schemes. This paper analyses the underpinning noise contributions and combines them into full noise budgets of the two initially targeted configurations: 1) operating with 1550 nm laser light and at a temperature of 18 K and 2) operating at 2090 nm wavelength and a temperature of 123 K. △ Less

Submitted 10 June, 2022; originally announced June 2022.

KM3NeT front-end and readout electronics system: hardware, firmware and software

Authors: The KM3NeT Collaboration, S. Aiello, F. Ameli, M. Andre, G. Androulakis, M. Anghinolfi, G. Anton, M. Ardid, J. Aublin, C. Bagatelas, G. Barbarino, B. Baret, S. Basegmez du Pree, A. Belias, E. Berbee, A. M. van den Berg, V. Bertin, V. van Beveren, S. Biagi, A. Biagioni, S. Bianucci, M. Billault, M. Bissinger, P. Bos, J. Boumaaza , et al. (215 additional authors not shown)

Abstract: The KM3NeT research infrastructure being built at the bottom of the Mediterranean Sea will host water-Cherenkov telescopes for the detection of cosmic neutrinos. The neutrino telescopes will consist of large volume three-dimensional grids of optical modules to detect the Cherenkov light from charged particles produced by neutrino-induced interactions. Each optical module houses 31 3-inch photomult… ▽ More The KM3NeT research infrastructure being built at the bottom of the Mediterranean Sea will host water-Cherenkov telescopes for the detection of cosmic neutrinos. The neutrino telescopes will consist of large volume three-dimensional grids of optical modules to detect the Cherenkov light from charged particles produced by neutrino-induced interactions. Each optical module houses 31 3-inch photomultiplier tubes, instrumentation for calibration of the photomultiplier signal and positioning of the optical module and all associated electronics boards. By design, the total electrical power consumption of an optical module has been capped at seven watts. This paper presents an overview of the front-end and readout electronics system inside the optical module, which has been designed for a 1~ns synchronization between the clocks of all optical modules in the grid during a life time of at least 20 years. △ Less

Submitted 29 July, 2019; v1 submitted 15 July, 2019; originally announced July 2019.

Comments: Prepared submission to Journal of Astronomical Telescopes, Instruments, and Systems (JATIS)

Cherenkov Telescope Array Contributions to the 35th International Cosmic Ray Conference (ICRC2017)

Authors: F. Acero, B. S. Acharya, V. Acín Portella, C. Adams, I. Agudo, F. Aharonian, I. Al Samarai, A. Alberdi, M. Alcubierre, R. Alfaro, J. Alfaro, C. Alispach, R. Aloisio, R. Alves Batista, J. -P. Amans, E. Amato, L. Ambrogi, G. Ambrosi, M. Ambrosio, J. Anderson, M. Anduze, E. O. Angüner, E. Antolini, L. A. Antonelli, V. Antonuccio , et al. (1117 additional authors not shown)

Abstract: List of contributions from the Cherenkov Telescope Array Consortium presented at the 35th International Cosmic Ray Conference, July 12-20 2017, Busan, Korea. List of contributions from the Cherenkov Telescope Array Consortium presented at the 35th International Cosmic Ray Conference, July 12-20 2017, Busan, Korea. △ Less

Submitted 24 October, 2017; v1 submitted 11 September, 2017; originally announced September 2017.

Comments: Index of Cherenkov Telescope Array conference proceedings at the ICRC2017, Busan, Korea

Letter of Intent for KM3NeT 2.0

Authors: S. Adrián-Martínez, M. Ageron, F. Aharonian, S. Aiello, A. Albert, F. Ameli, E. Anassontzis, M. Andre, G. Androulakis, M. Anghinolfi, G. Anton, M. Ardid, T. Avgitas, G. Barbarino, E. Barbarito, B. Baret, J. Barrios-Martí, B. Belhorma, A. Belias, E. Berbee, A. van den Berg, V. Bertin, S. Beurthey, V. van Beveren, N. Beverini , et al. (222 additional authors not shown)

Abstract: The main objectives of the KM3NeT Collaboration are i) the discovery and subsequent observation of high-energy neutrino sources in the Universe and ii) the determination of the mass hierarchy of neutrinos. These objectives are strongly motivated by two recent important discoveries, namely: 1) The high-energy astrophysical neutrino signal reported by IceCube and 2) the sizable contribution of elect… ▽ More The main objectives of the KM3NeT Collaboration are i) the discovery and subsequent observation of high-energy neutrino sources in the Universe and ii) the determination of the mass hierarchy of neutrinos. These objectives are strongly motivated by two recent important discoveries, namely: 1) The high-energy astrophysical neutrino signal reported by IceCube and 2) the sizable contribution of electron neutrinos to the third neutrino mass eigenstate as reported by Daya Bay, Reno and others. To meet these objectives, the KM3NeT Collaboration plans to build a new Research Infrastructure consisting of a network of deep-sea neutrino telescopes in the Mediterranean Sea. A phased and distributed implementation is pursued which maximises the access to regional funds, the availability of human resources and the synergetic opportunities for the earth and sea sciences community. Three suitable deep-sea sites are identified, namely off-shore Toulon (France), Capo Passero (Italy) and Pylos (Greece). The infrastructure will consist of three so-called building blocks. A building block comprises 115 strings, each string comprises 18 optical modules and each optical module comprises 31 photo-multiplier tubes. Each building block thus constitutes a 3-dimensional array of photo sensors that can be used to detect the Cherenkov light produced by relativistic particles emerging from neutrino interactions. Two building blocks will be configured to fully explore the IceCube signal with different methodology, improved resolution and complementary field of view, including the Galactic plane. One building block will be configured to precisely measure atmospheric neutrino oscillations. △ Less

Submitted 26 July, 2016; v1 submitted 27 January, 2016; originally announced January 2016.

Comments: 119 pages, published version, revised Eq. 6, 7

Journal ref: Journal of Physics G: Nuclear and Particle Physics, 43 (8), 084001, 2016

The prototype detection unit of the KM3NeT detector

Authors: KM3NeT Collaboration, S. Adrián-Martínez, M. Ageron, F. Aharonian, S. Aiello, A. Albert, F. Ameli, E. G. Anassontzis, G. C. Androulakis, M. Anghinolfi, G. Anton, S. Anvar, M. Ardid, T. Avgitas, K. Balasi, H. Band, G. Barbarino, E. Barbarito, F. Barbato, B. Baret, S. Baron, J. Barrios, A. Belias, E. Berbee, A. M. van den Berg , et al. (224 additional authors not shown)

Abstract: A prototype detection unit of the KM3NeT deep-sea neutrino telescope has been installed at 3500m depth 80km offshore the Italian coast. KM3NeT in its final configuration will contain several hundreds of detection units. Each detection unit is a mechanical structure anchored to the sea floor, held vertical by a submerged buoy and supporting optical modules for the detection of Cherenkov light emitt… ▽ More A prototype detection unit of the KM3NeT deep-sea neutrino telescope has been installed at 3500m depth 80km offshore the Italian coast. KM3NeT in its final configuration will contain several hundreds of detection units. Each detection unit is a mechanical structure anchored to the sea floor, held vertical by a submerged buoy and supporting optical modules for the detection of Cherenkov light emitted by charged secondary particles emerging from neutrino interactions. This prototype string implements three optical modules with 31 photomultiplier tubes each. These optical modules were developed by the KM3NeT Collaboration to enhance the detection capability of neutrino interactions. The prototype detection unit was operated since its deployment in May 2014 until its decommissioning in July 2015. Reconstruction of the particle trajectories from the data requires a nanosecond accuracy in the time calibration. A procedure for relative time calibration of the photomultiplier tubes contained in each optical module is described. This procedure is based on the measured coincidences produced in the sea by the 40K background light and can easily be expanded to a detector with several thousands of optical modules. The time offsets between the different optical modules are obtained using LED nanobeacons mounted inside them. A set of data corresponding to 600 hours of livetime was analysed. The results show good agreement with Monte Carlo simulations of the expected optical background and the signal from atmospheric muons. An almost background-free sample of muons was selected by filtering the time correlated signals on all the three optical modules. The zenith angle of the selected muons was reconstructed with a precision of about 3°. △ Less

Submitted 23 December, 2015; v1 submitted 6 October, 2015; originally announced October 2015.

Comments: Accepted for publication by EPJ C

Journal ref: Eur. Phys. J. C (2016) 76:54

Deep sea tests of a prototype of the KM3NeT digital optical module

Authors: S. Adrián-Martínez, M. Ageron, F. Aharonian, S. Aiello, A. Albert, F. Ameli, E. G. Anassontzis, M. Anghinolfi, G. Anton, S. Anvar, M. Ardid, R. de Asmundis, K. Balasi, H. Band, G. Barbarino, E. Barbarito, F. Barbato, B. Baret, S. Baron, A. Belias, E. Berbee, A. M. van den Berg, A. Berkien, V. Bertin, S. Beurthey , et al. (225 additional authors not shown)

Abstract: The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deep waters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on th… ▽ More The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deep waters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on the first months of data taking and rate measurements. The analysis results highlight the capabilities of the new module design in terms of background suppression and signal recognition. The directionality of the optical module enables the recognition of multiple Cherenkov photons from the same $^{40}$K decay and the localization bioluminescent activity in the neighbourhood. The single unit can cleanly identify atmospheric muons and provide sensitivity to the muon arrival directions. △ Less

Submitted 16 May, 2014; v1 submitted 5 May, 2014; originally announced May 2014.