-
Signs of late infall and possible planet formation around DR Tau using VLT/SPHERE and LBTI/LMIRCam
Authors:
D. Mesa,
C. Ginski,
R. Gratton,
S. Ertel,
K. Wagner,
M. Bonavita,
D. Fedele,
M. Meyer,
T. Henning,
M. Langlois,
A. Garufi,
S. Antoniucci,
R. Claudi,
D. Defrere,
S. Desidera,
M. Janson,
N. Pawellek,
E. Rigliaco,
V. Squicciarini,
A. Zurlo,
A. Boccaletti,
M. Bonnefoy,
F. Cantalloube,
G. Chauvin,
M. Feldt
, et al. (9 additional authors not shown)
Abstract:
Context. Protoplanetary disks around young stars often contain substructures like rings, gaps, and spirals that could be caused by interactions between the disk and forming planets. Aims. We aim to study the young (1-3 Myr) star DR Tau in the near-infrared and characterize its disk, which was previously resolved through sub-millimeter interferometry with ALMA, and to search for possible sub-stella…
▽ More
Context. Protoplanetary disks around young stars often contain substructures like rings, gaps, and spirals that could be caused by interactions between the disk and forming planets. Aims. We aim to study the young (1-3 Myr) star DR Tau in the near-infrared and characterize its disk, which was previously resolved through sub-millimeter interferometry with ALMA, and to search for possible sub-stellar companions embedded into it. Methods. We observed DR Tau with VLT/SPHERE both in polarized light (H broad band) and total intensity (in Y, J, H, and K spectral bands). We also performed L' band observations with LBTI/LMIRCam on the Large Binocular Telescope (LBT). Results. We found two previously undetected spirals extending north-east and south of the star, respectively. We further detected an arc-like structure north of the star. Finally a bright, compact and elongated structure was detected at separation of 303 +/- 10 mas and position angle 21.2 +/- 3.7 degrees, just at the root of the north-east spiral arm. Since this feature is visible both in polarized light and in total intensity and has a flat spectrum it is likely caused by stellar light scattered by dust. Conclusions. The two spiral arms are at different separation from the star, have very different pitch angles, and are separated by an apparent discontinuity, suggesting they might have a different origin. The very open southern spiral arm might be caused by infalling material from late encounters with cloudlets into the formation environment of the star itself. The compact feature could be caused by interaction with a planet in formation still embedded in its dust envelope and it could be responsible for launching the north-east spiral. We estimate a mass of the putative embedded object of the order of few M_Jup .
△ Less
Submitted 2 November, 2021;
originally announced November 2021.
-
The SPHERE infrared survey for exoplanets (SHINE)- I Sample definition and target characterization
Authors:
S. Desidera,
G. Chauvin,
M. Bonavita,
S. Messina,
H. LeCoroller,
T. Schmidt,
R. Gratton,
C. Lazzoni,
M. Meyer,
J. Schlieder,
A. Cheetham,
J. Hagelberg,
M. Bonnefoy,
M. Feldt,
A-M. Lagrange,
M. Langlois,
A. Vigan,
T. G. Tan,
F. -J. Hambsch,
M. Millward,
J. Alcala,
S. Benatti,
W. Brandner,
J. Carson,
E. Covino
, et al. (83 additional authors not shown)
Abstract:
Large surveys with new-generation high-contrast imaging instruments are needed to derive the frequency and properties of exoplanet populations with separations from $\sim$5 to 300 AU. A careful assessment of the stellar properties is crucial for a proper understanding of when, where, and how frequently planets form, and how they evolve. The sensitivity of detection limits to stellar age makes this…
▽ More
Large surveys with new-generation high-contrast imaging instruments are needed to derive the frequency and properties of exoplanet populations with separations from $\sim$5 to 300 AU. A careful assessment of the stellar properties is crucial for a proper understanding of when, where, and how frequently planets form, and how they evolve. The sensitivity of detection limits to stellar age makes this a key parameter for direct imaging surveys. We describe the SpHere INfrared survey for Exoplanets (SHINE), the largest direct imaging planet-search campaign initiated at the VLT in 2015 in the context of the SPHERE Guaranteed Time Observations of the SPHERE consortium. In this first paper we present the selection and the properties of the complete sample of stars surveyed with SHINE, focusing on the targets observed during the first phase of the survey (from February 2015 to February 2017). This early sample composed of 150 stars is used to perform a preliminary statistical analysis of the SHINE data, deferred to two companion papers presenting the survey performance, main discoveries, and the preliminary statistical constraints set by SHINE. Based on a large database collecting the stellar properties of all young nearby stars in the solar vicinity (including kinematics, membership to moving groups, isochrones, lithium abundance, rotation, and activity), we selected the original sample of 800 stars that were ranked in order of priority according to their sensitivity for planet detection in direct imaging with SPHERE. The properties of the stars that are part of the early statistical sample were revisited, including for instance measurements from the GAIA Data Release 2.
△ Less
Submitted 7 March, 2021;
originally announced March 2021.
-
The SPHERE infrared survey for exoplanets (SHINE) -- II. Observations, Data reduction and analysis Detection performances and early-results
Authors:
M. Langlois,
R. Gratton,
A. -M. Lagrange,
P. Delorme,
A. Boccaletti,
M. Bonnefoy,
A. -L. Maire,
D. Mesa,
G. Chauvin,
S. Desidera,
A. Vigan,
A. Cheetham,
J. Hagelberg,
M. Feldt,
M. Meyer,
P. Rubini,
H. Le Coroller,
F. Cantalloube,
B. Biller,
M. Bonavita,
T. Bhowmik,
W. Brandner,
S. Daemgen,
V. D'Orazi,
O. Flasseur
, et al. (96 additional authors not shown)
Abstract:
Over the past decades, direct imaging has confirmed the existence of substellar companions (exoplanets or brown dwarfs) on wide orbits (>10 au) from their host stars. To understand their formation and evolution mechanisms, we have initiated in 2015 the SPHERE infrared survey for exoplanets (SHINE), a systematic direct imaging survey of young, nearby stars to explore their demographics.} {We aim to…
▽ More
Over the past decades, direct imaging has confirmed the existence of substellar companions (exoplanets or brown dwarfs) on wide orbits (>10 au) from their host stars. To understand their formation and evolution mechanisms, we have initiated in 2015 the SPHERE infrared survey for exoplanets (SHINE), a systematic direct imaging survey of young, nearby stars to explore their demographics.} {We aim to detect and characterize the population of giant planets and brown dwarfs beyond the snow line around young, nearby stars. Combined with the survey completeness, our observations offer the opportunity to constrain the statistical properties (occurrence, mass and orbital distributions, dependency on the stellar mass) of these young giant planets.} {In this study, we present the observing and data analysis strategy, the ranking process of the detected candidates, and the survey performances for a subsample of 150 stars, which are representative of the full SHINE sample. The observations were conducted in an homogeneous way from February 2015 to February 2017 with the dedicated ground-based VLT/SPHERE instrument equipped with the IFS integral field spectrograph and the IRDIS dual-band imager covering a spectral range between 0.9 and 2.3 $μ$m. We used coronographic, angular and spectral differential imaging techniques to reach the best detection performances for this study down to the planetary mass regime.}
△ Less
Submitted 5 March, 2021;
originally announced March 2021.
-
Curved detector-based optical design for the VLT/BlueMUSE instrument
Authors:
Alexandre Jeanneau,
Johan Kosmalski,
Eduard Muslimov,
Emmanuel Hugot,
Roland Bacon,
Johan Richard
Abstract:
BlueMUSE (Blue Multi Unit Spectroscopic Explorer) is a blue-optimised, medium spectral resolution, panoramic integral field spectrograph proposed for the Very Large Telescope (VLT) and based on the MUSE concept. BlueMUSE will open up a new range of galactic and extragalactic science cases allowed by its specific capabilities in the 350 - 580 nm range: an optimised end-to-end transmission down to 3…
▽ More
BlueMUSE (Blue Multi Unit Spectroscopic Explorer) is a blue-optimised, medium spectral resolution, panoramic integral field spectrograph proposed for the Very Large Telescope (VLT) and based on the MUSE concept. BlueMUSE will open up a new range of galactic and extragalactic science cases allowed by its specific capabilities in the 350 - 580 nm range: an optimised end-to-end transmission down to 350 nm, a larger FoV (up to $1.4 \times 1.4$ arcmin$^2$) sampled at 0.3 arcsec, and a higher spectral resolution ($λ/Δλ\sim 3500$) compared to MUSE. To our knowledge, achieving such capabilities with a comparable mechanical footprint and an identical detector format ($4\text{k} \times 4\text{k}$, 15 $\mathrm{μm}$ CCD) would not be possible with a conventional spectrograph design. In this paper, we present the optomechanical architecture and design of BlueMUSE at pre-phase A level, with a particular attention to some original aspects such as the use of curved detectors.
△ Less
Submitted 19 January, 2021;
originally announced January 2021.
-
3D printing for astronomical mirrors
Authors:
Melanie Roulet,
Carolyn Atkins,
Emmanuel Hugot,
Sabri Lemared,
Simona Lombardo,
Marc Ferrari
Abstract:
3D printing, also called additive manufacturing, offers a new vision for optical fabrication in term of achievable optical quality and reduction of weight and cost. In this paper we describe two different ways to use this technique in the fabrication process. The first method makes use of 3D printing in the fabrication of war** harnesses for stress polishing, and we apply that to the fabrication…
▽ More
3D printing, also called additive manufacturing, offers a new vision for optical fabrication in term of achievable optical quality and reduction of weight and cost. In this paper we describe two different ways to use this technique in the fabrication process. The first method makes use of 3D printing in the fabrication of war** harnesses for stress polishing, and we apply that to the fabrication of the WFIRST coronagraph off axis parabolas. The second method considers a proof of concept for 3D printing of lightweight X-Ray mirrors, targeting the next generation of X-rays telescopes. Stress polishing is well suited for the fabrication of the high quality off axis parabolas required by the coronagraph to image exoplanets.. Here we describe a new design of war** harness which can generate astigmatism and coma with only one actuator. The idea is to incorporate 3D printing in the manufacturing of the war** harness. The method depicted in this paper demonstrates that we reach the tight precision required at the mirrors surface. Moreover the error introduced by the war** harness fabricated by 3D printing does not impact the final error budget. Concerning the proof of concept project, we investigate 3D printing towards lightweight X-ray mirrors. We present the surface metrology of test samples fabricated by stereo lithography (SLA) and Selective Laser Sintering (SLS) with different materials. The lightweighting of the samples is composed of a series of arches. By complementing 3D printing with finite element analysis topology optimization we can simulate a specific optimum shape for the given input parameters and external boundary conditions. The next set of prototypes is designed taking to account the calculation of topology optimisation.
△ Less
Submitted 2 November, 2020;
originally announced November 2020.
-
Superpolished OAPs for WFIRST CGI
Authors:
Melanie Roulet,
Emmanuel Hugot,
Carolyn Atkins,
Sabri Lemared,
Simona Lombardo,
Marc Ferrari
Abstract:
Exoplanet imaging requires super polished off-axis parabolas (OAP) with the utmost surface quality. In this paper we describe an innovative manufacturing process combining 3D printing and stress polishing, to create a war** harness capable of producing any off axis parabola profile with a single actuator. The war** harness is manufactured by 3D printing. This method will be applied to the prod…
▽ More
Exoplanet imaging requires super polished off-axis parabolas (OAP) with the utmost surface quality. In this paper we describe an innovative manufacturing process combining 3D printing and stress polishing, to create a war** harness capable of producing any off axis parabola profile with a single actuator. The war** harness is manufactured by 3D printing. This method will be applied to the production of the WFIRST coronagraph's off axis parabolas. The evolution of the war** harness design is presented, starting from a ring war** harness generating astigmatism, to an innovative thickness distribution harness optimised to generate an off axis parabola shape. Several design options are available for the prototy** phase, with their advantages and disadvantages which will be discussed.
△ Less
Submitted 2 November, 2020;
originally announced November 2020.
-
Use of 3D printing in astronomical mirror fabrication
Authors:
Melanie Roulet,
Carolyn Atkins,
Emmanuel Hugot,
Robert Snell,
Bart van de Vorst,
Katherine Morris,
Michel Marcos,
Iain Todd,
Christopher Miller,
Joris Dufils,
Szigfrid Farkas,
Gyorgy Mezo,
Fabio Tenegi,
Afrodisio Vega-Moreno,
Hermine Schnetler
Abstract:
In this paper we are exploring the possibilities of 3D printing in the fabrication of mirrors for astronomy. Taking the advantages of 3D printing to solve the existing problems caused by traditional manufacturing, two proof-of-concept mirror fabrication strategies are investigated in this paper. The First concept is a deformable mirror with embedded actuator supports system to minimise errors caus…
▽ More
In this paper we are exploring the possibilities of 3D printing in the fabrication of mirrors for astronomy. Taking the advantages of 3D printing to solve the existing problems caused by traditional manufacturing, two proof-of-concept mirror fabrication strategies are investigated in this paper. The First concept is a deformable mirror with embedded actuator supports system to minimise errors caused by the bonding interfaces during mirror assembly. The second concept is the adaption of the Stress Mirror Polishing (SMP) technique to a variety of mirror shapes by implemented a printed thickness distribution on the back side of the mirror. Design investigations and prototypes plans are presented for both studies.
△ Less
Submitted 2 November, 2020;
originally announced November 2020.
-
The SPHERE infrared survey for exoplanets (SHINE). III. The demographics of young giant exoplanets below 300 au with SPHERE
Authors:
A. Vigan,
C. Fontanive,
M. Meyer,
B. Biller,
M. Bonavita,
M. Feldt,
S. Desidera,
G. -D. Marleau,
A. Emsenhuber,
R. Galicher,
K. Rice,
D. Forgan,
C. Mordasini,
R. Gratton,
H. Le Coroller,
A. -L. Maire,
F. Cantalloube,
G. Chauvin,
A. Cheetham,
J. Hagelberg,
A. -M. Lagrange,
M. Langlois,
M. Bonnefoy,
J. -L. Beuzit,
A. Boccaletti
, et al. (86 additional authors not shown)
Abstract:
The SHINE project is a 500-star survey performed with SPHERE on the VLT for the purpose of directly detecting new substellar companions and understanding their formation and early evolution. Here we present an initial statistical analysis for a subsample of 150 stars that are representative of the full SHINE sample. Our goal is to constrain the frequency of substellar companions with masses betwee…
▽ More
The SHINE project is a 500-star survey performed with SPHERE on the VLT for the purpose of directly detecting new substellar companions and understanding their formation and early evolution. Here we present an initial statistical analysis for a subsample of 150 stars that are representative of the full SHINE sample. Our goal is to constrain the frequency of substellar companions with masses between 1 and 75 MJup and semimajor axes between 5 and 300 au. We adopt detection limits as a function of angular separation from the survey data for all stars converted into mass and projected orbital separation using the BEX-COND-hot evolutionary tracks and known distance to each system. Based on the results obtained for each star and on the 13 detections in the sample, we use a MCMC tool to compare our observations to two different types of models. The first is a parametric model based on observational constraints, and the second type are numerical models that combine advanced core accretion and gravitational instability planet population synthesis. Using the parametric model, we show that the frequencies of systems with at least one substellar companion are $23.0_{-9.7}^{+13.5}\%$, $5.8_{-2.8}^{+4.7}\%$, and $12.6_{-7.1}^{+12.9}\%$ for BA, FGK, and M stars, respectively. We also demonstrate that a planet-like formation pathway probably dominates the mass range from 1-75 MJup for companions around BA stars, while for M dwarfs, brown dwarf binaries dominate detections. In contrast, a combination of binary star-like and planet-like formation is required to best fit the observations for FGK stars. Using our population model and restricting our sample to FGK stars, we derive a frequency of $5.7_{-2.8}^{+3.8}\%$, consistent with predictions from the parametric model. More generally, the frequency values that we derive are in excellent agreement with values obtained in previous studies.
△ Less
Submitted 13 July, 2020;
originally announced July 2020.
-
CASTLE: performances and science cases
Authors:
S. Lombardo,
F. Prada,
E. Hugot,
S. Basa,
J. M. Bautista,
S. Boissier,
A. Boselli,
A. Bosma,
J. C. Cuillandre,
P. A. Duc,
M. Ferrari,
N. Grosso,
L. Izzo,
K. Joaquina,
Junais,
J. Koda,
A. Lamberts,
G. R. Lemaitre,
A. Longobardi,
D. Martínez-Delgado,
E. Muslimov,
J. L. Ortiz,
E. Perez,
D. Porquet,
B. Sicardy
, et al. (1 additional authors not shown)
Abstract:
We present here the Calar Alto Schmidt-Lemaitre Telescope (CASTLE) concept, a technology demonstrator for curved detectors, that will be installed at the Calar Alto Observatory (Spain). This telescope has a wide field of view (2.36x1.56 deg^2) and a design, optimised to generate a Point Spread Function with very low level wings and reduced ghost features, which makes it considerably less susceptib…
▽ More
We present here the Calar Alto Schmidt-Lemaitre Telescope (CASTLE) concept, a technology demonstrator for curved detectors, that will be installed at the Calar Alto Observatory (Spain). This telescope has a wide field of view (2.36x1.56 deg^2) and a design, optimised to generate a Point Spread Function with very low level wings and reduced ghost features, which makes it considerably less susceptible to several systematic effects usually affecting similar systems. These characteristics are particularly suited to study the low surface brightness Universe. CASTLE will be able to reach surface brightness orders of magnitude fainter than the sky background level and observe the extremely extended and faint features around galaxies such as tidal features, stellar halos, intra-cluster light, etc. CASTLE will also be used to search and detect astrophysical transients such as gamma ray bursts (GRB), gravitational wave optical counterparts, neutrino counterparts, etc. This will increase the number of precisely localized GRBs from 20% to 60% (in the case of Fermi/GMB GRBs).
△ Less
Submitted 24 June, 2020;
originally announced June 2020.
-
Stress mirror polishing for future large lightweight mirrors: design using shape optimization
Authors:
Sabri Lemared,
Marc Ferrari,
Christian Du Jeu,
Thibault Dufour,
Nathalie Soulier,
Emmanuel Hugot
Abstract:
This study proposes a new way to manufacture large lightweight aspherics for space telescopes using Stress Mirror Polishing (SMP). This technique is well known to allow reaching high quality optical surfaces in a minimum time period, thanks to a spherical full-size polishing tool. To obtain the correct surface' aspheric shape, it is necessary to define precisely the thickness distribution of the m…
▽ More
This study proposes a new way to manufacture large lightweight aspherics for space telescopes using Stress Mirror Polishing (SMP). This technique is well known to allow reaching high quality optical surfaces in a minimum time period, thanks to a spherical full-size polishing tool. To obtain the correct surface' aspheric shape, it is necessary to define precisely the thickness distribution of the mirror to be deformed, according to the manufacturing parameters. We first introduce active optics and Stress Mirror Polishing techniques, and then, we describe the process to obtain the appropriate thickness mirror distribution allowing to generate the required aspheric shape during polishing phase. Shape optimization procedure using PYTHON programing and NASTRAN optimization solver using Finite Element Model (FEM) is developed and discussed in order to assist this process. The main result of this paper is the ability of the shape optimization process to support SMP technique to generate a peculiar aspherical shape from a spherical optical surface thanks to a thickness distribution resha**. This paper is primarily focused on a theoretical framework with numerical simulations as the first step before the manufacturing of a demonstrator. This two-steps approach was successfully used for previous projects.
△ Less
Submitted 20 April, 2020;
originally announced April 2020.
-
Measuring the cophasing state of a segmented mirror with a wavelength sweep and a Zernike phase contrast sensor
Authors:
Anne-Laure Cheffot,
Arthur Vigan,
Samuel Leveque,
Emmanuel Hugot
Abstract:
The demand for higher resolution telescopes leads to segmented primary mirrors which need to be phased for operation. A phasing sensor applying a wavelength sweep technique provides a large capture range without modulating the position of individual mirror segments. This technique offers the potential to monitor the phasing state of a segmented telescope in parallel to the science observations. We…
▽ More
The demand for higher resolution telescopes leads to segmented primary mirrors which need to be phased for operation. A phasing sensor applying a wavelength sweep technique provides a large capture range without modulating the position of individual mirror segments. This technique offers the potential to monitor the phasing state of a segmented telescope in parallel to the science observations. We evaluate the performance of the wavelength sweep technique using a Zernike phase contrast sensor for coarse phasing. Tests results on a dedicated bench show 112 nm rms precision. With the help of a simulation, we explain a known error of the method and we suggest ways for improvements.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Investigating the nature of the extended structure around the Herbig star RCrA using integral field and high-resolution spectroscopy
Authors:
E. Rigliaco,
R. Gratton,
D. Mesa,
V. D'Orazi,
M. Bonnefoy,
J. M. Alcala',
S. Antoniucci,
F. Bacciotti,
M. Dima,
B. Nisini,
L. Podio,
M. Barbieri,
R. Claudi,
S. Desidera,
A. Garufi,
E. Hugot,
M. Janson,
M. Langlois,
E. L. Rickman,
E. Sissa,
M. Ubeira Gabellini,
G. van der Plas,
A. Zurlo,
Y. Magnard,
D. Perret
, et al. (2 additional authors not shown)
Abstract:
We present a detailed analysis of the extended structure detected around the young and close-by Herbig Ae/Be star RCrA. This is a young triple system with an intermediate mass central binary whose separation is of the order of a few tens of the radii of the individual components, and an M-star companion at about 30 au. Our aim is to understand the nature of the extended structure by means of combi…
▽ More
We present a detailed analysis of the extended structure detected around the young and close-by Herbig Ae/Be star RCrA. This is a young triple system with an intermediate mass central binary whose separation is of the order of a few tens of the radii of the individual components, and an M-star companion at about 30 au. Our aim is to understand the nature of the extended structure by means of combining integral-field and high-resolution spectroscopy. We conducted the analysis based on FEROS archival optical spectroscopy data and adaptive optics images and integral-field spectra obtained with SINFONI and SPHERE at the VLT. The observations reveal a complex extended structure that is composed of at least two components: a non-uniform wide cavity whose walls are detected in continuum emission up to 400~au, and a collimated wiggling-jet detected in the emission lines of Helium and Hydrogen. Moreover, the presence of [FeII] emission projected close to the cavity walls suggests the presence of a slower moving wind, most likely a disk wind. The multiple components of the optical forbidden lines also indicate the presence of a high-velocity jet co-existing with a slow wind. We constructed a geometrical model of the collimated jet flowing within the cavity using intensity and velocity maps, finding that its wiggling is consistent with the orbital period of the central binary. The cavity and the jet do not share the same position angle, suggesting that the jet is itself experiencing a precession motion possibly due to the wide M-dwarf companion. We propose a scenario that closely agrees with the general expectation of a magneto-centrifugal-launched jet. These results build upon the extensive studies already conducted on RCrA.
△ Less
Submitted 22 October, 2019;
originally announced October 2019.
-
The polarimetric imaging mode of VLT/SPHERE/IRDIS I: Description, data reduction and observing strategy
Authors:
J. de Boer,
M. Langlois,
R. G. van Holstein,
J. H. Girard,
D. Mouillet,
A. Vigan,
K. Dohlen,
F. Snik,
C. U. Keller,
C. Ginski,
D. M. Stam,
J. Milli,
Z. Wahhaj,
M. Kasper,
H. M. Schmid,
P. Rabou,
L. Gluck,
E. Hugot,
D. Perret,
P. Martinez,
L. Weber,
J. Pragt,
J. -F. Sauvage,
A. Boccaletti,
H. Le Coroller
, et al. (9 additional authors not shown)
Abstract:
Context. Polarimetric imaging is one of the most effective techniques for high-contrast imaging and characterization of protoplanetary disks, and has the potential to be instrumental in characterizing exoplanets. VLT/SPHERE contains the InfraRed Dual-band Imager and Spectrograph (IRDIS) with a dual-beam polarimetric imaging (DPI) mode, which offers the capability to obtain linear polarization imag…
▽ More
Context. Polarimetric imaging is one of the most effective techniques for high-contrast imaging and characterization of protoplanetary disks, and has the potential to be instrumental in characterizing exoplanets. VLT/SPHERE contains the InfraRed Dual-band Imager and Spectrograph (IRDIS) with a dual-beam polarimetric imaging (DPI) mode, which offers the capability to obtain linear polarization images at high contrast and resolution. Aims. We aim to provide an overview of IRDIS/DPI and study its optical design to improve observing strategies and data reduction. Methods. For H-band observations of TW Hya, we compare two data reduction methods that correct for instrumental polarization effects in different ways: a minimization of the noise image, and a polarimetric-model-based correction method that we present in Paper II of this study. Results. We use observations of TW Hya to illustrate the data reduction. In the images of the protoplanetary disk around this star we detect variability in the polarized intensity and angle of linear polarization with pointing-dependent instrument configuration. We explain these variations as instrumental polarization effects and correct for these effects using our model-based correction method. Conclusions. IRDIS/DPI has proven to be a very successful and productive high-contrast polarimetric imaging system. However, the instrument performance depends on the specific instrument configuration. We suggest adjustments to future observing strategies to optimize polarimetric efficiency in field tracking mode by avoiding unfavourable derotator angles. We recommend reducing on-sky data with the pipeline called IRDAP that includes the model-based correction method (described in Paper II) to optimally account for the remaining telescope and instrumental polarization effects and to retrieve the true polarization state of the incident light.
△ Less
Submitted 28 September, 2019;
originally announced September 2019.
-
Next-generation telescopes with curved focal surface for ultra-low surface brightness surveys
Authors:
Simona Lombardo,
Eduard Muslimov,
Gerard Lemaître,
Emmanuel Hugot
Abstract:
In spite of major advances in both ground- and space-based instrumentation, the ultra-low-surface brightness universe (ULSB) still remains a largely unexplored volume in observational parameter space. ULSB observations provide unique constraints on a wide variety of objects, from the Zodiacal light all the way to the optical cosmological background radiation, through dust cirri, mass loss shells i…
▽ More
In spite of major advances in both ground- and space-based instrumentation, the ultra-low-surface brightness universe (ULSB) still remains a largely unexplored volume in observational parameter space. ULSB observations provide unique constraints on a wide variety of objects, from the Zodiacal light all the way to the optical cosmological background radiation, through dust cirri, mass loss shells in giant stars, LSB galaxies and the intracluster light. These surface brightness levels (>28-29 mag arcsec^-2) are observed by maximising the efficiency of the surveys and minimising or removing the systematics arising in the measurement of surface brightness. Based on full-system photon Monte Carlo simulations, we present here the performance of a ground-based telescope aimed at carrying out ULSB observations, with a curved focal surface design. Its off-axis optical design maximises the field of view while minimising the focal ratio. No lenses are used, as their multiple internal scatterings increase the wings of the point spread function (PSF), and the usual requirement of a flat focal plane is relaxed through the use of curved CCD detectors. The telescope has only one unavoidable single refractive surface, the cryostat window, and yet it delivers a PSF with ultra-compact wings, which allows the detection, for a given exposure time, of surface brightness levels nearly three orders of magnitude fainter than any other current telescope.
△ Less
Submitted 24 July, 2019;
originally announced July 2019.
-
BlueMUSE: Project Overview and Science Cases
Authors:
Johan Richard,
Roland Bacon,
Jérémy Blaizot,
Samuel Boissier,
Alessandro Boselli,
NicolasBouché,
Jarle Brinchmann,
Norberto Castro,
Laure Ciesla,
Paul Crowther,
Emanuele Daddi,
Stefan Dreizler,
Pierre-Alain Duc,
David Elbaz,
Benoit Epinat,
Chris Evans,
Matteo Fossati,
Michele Fumagalli,
Miriam Garcia,
Thibault Garel,
Matthew Hayes,
Angela Adamo,
Artemio Herrero,
Emmanuel Hugot,
Andrew Humphrey
, et al. (37 additional authors not shown)
Abstract:
We present the concept of BlueMUSE, a blue-optimised, medium spectral resolution, panoramic integral field spectrograph based on the MUSE concept and proposed for the Very Large Telescope. With an optimised transmission down to 350 nm, a larger FoV (1.4 x 1.4 arcmin$^2$) and a higher spectral resolution compared to MUSE, BlueMUSE will open up a new range of galactic and extragalactic science cases…
▽ More
We present the concept of BlueMUSE, a blue-optimised, medium spectral resolution, panoramic integral field spectrograph based on the MUSE concept and proposed for the Very Large Telescope. With an optimised transmission down to 350 nm, a larger FoV (1.4 x 1.4 arcmin$^2$) and a higher spectral resolution compared to MUSE, BlueMUSE will open up a new range of galactic and extragalactic science cases allowed by its specific capabilities, beyond those possible with MUSE. For example a survey of massive stars in our galaxy and the Local Group will increase the known population of massive stars by a factor $>$100, to answer key questions about their evolution. Deep field observations with BlueMUSE will also significantly increase samples of Lyman-alpha emitters, spanning the era of Cosmic Noon. This will revolutionise the study of the distant Universe: allowing the intergalactic medium to be detected unambiguously in emission, enabling the study of the exchange of baryons between galaxies and their surroundings. By 2030, at a time when the focus of most of the new large facilities (ELT, JWST) will be on the infra-red, BlueMUSE will be a unique facility, outperforming any ELT instrument in the Blue/UV. It will have a strong synergy with ELT, JWST as well as ALMA, SKA, Euclid and Athena.
△ Less
Submitted 9 November, 2021; v1 submitted 4 June, 2019;
originally announced June 2019.
-
SPHERE: the exoplanet imager for the Very Large Telescope
Authors:
J. -L. Beuzit,
A. Vigan,
D. Mouillet,
K. Dohlen,
R. Gratton,
A. Boccaletti,
J. -F. Sauvage,
H. M. Schmid,
M. Langlois,
C. Petit,
A. Baruffolo,
M. Feldt,
J. Milli,
Z. Wahhaj,
L. Abe,
U. Anselmi,
J. Antichi,
R. Barette,
J. Baudrand,
P. Baudoz,
A. Bazzon,
P. Bernardi,
P. Blanchard,
R. Brast,
P. Bruno
, et al. (86 additional authors not shown)
Abstract:
Observations of circumstellar environments to look for the direct signal of exoplanets and the scattered light from disks has significant instrumental implications. In the past 15 years, major developments in adaptive optics, coronagraphy, optical manufacturing, wavefront sensing and data processing, together with a consistent global system analysis have enabled a new generation of high-contrast i…
▽ More
Observations of circumstellar environments to look for the direct signal of exoplanets and the scattered light from disks has significant instrumental implications. In the past 15 years, major developments in adaptive optics, coronagraphy, optical manufacturing, wavefront sensing and data processing, together with a consistent global system analysis have enabled a new generation of high-contrast imagers and spectrographs on large ground-based telescopes with much better performance. One of the most productive is the Spectro-Polarimetic High contrast imager for Exoplanets REsearch (SPHERE) designed and built for the ESO Very Large Telescope (VLT) in Chile. SPHERE includes an extreme adaptive optics system, a highly stable common path interface, several types of coronagraphs and three science instruments. Two of them, the Integral Field Spectrograph (IFS) and the Infra-Red Dual-band Imager and Spectrograph (IRDIS), are designed to efficiently cover the near-infrared (NIR) range in a single observation for efficient young planet search. The third one, ZIMPOL, is designed for visible (VIR) polarimetric observation to look for the reflected light of exoplanets and the light scattered by debris disks. This suite of three science instruments enables to study circumstellar environments at unprecedented angular resolution both in the visible and the near-infrared. In this work, we present the complete instrument and its on-sky performance after 4 years of operations at the VLT.
△ Less
Submitted 3 October, 2019; v1 submitted 11 February, 2019;
originally announced February 2019.
-
Exploring the RCrA environment with SPHERE: Discovery of a new stellar companion
Authors:
D. Mesa,
M. Bonnefoy,
R. Gratton,
G. Van Der Plas,
V. D'Orazi,
E. Sissa,
A. Zurlo,
E. Rigliaco,
T. Schmidt,
M. Langlois,
A. Vigan,
M. G. Ubeira Gabellini,
S. Desidera,
S. Antoniucci,
M. Barbieri,
M. Benisty,
A. Boccaletti,
R. Claudi,
D. Fedele,
D. Gasparri,
T. Henning,
M. Kasper,
A. -M. Lagrange,
C. Lazzoni,
G. Lodato
, et al. (17 additional authors not shown)
Abstract:
Aims. R Coronae Australis (R CrA) is the brightest star of the Coronet nebula of the Corona Australis (CrA) star forming region. It has very red colors, probably due to dust absorption and it is strongly variable. High contrast instruments allow for an unprecedented direct exploration of the immediate circumstellar environment of this star. Methods. We observed R CrA with the near-IR channels (IFS…
▽ More
Aims. R Coronae Australis (R CrA) is the brightest star of the Coronet nebula of the Corona Australis (CrA) star forming region. It has very red colors, probably due to dust absorption and it is strongly variable. High contrast instruments allow for an unprecedented direct exploration of the immediate circumstellar environment of this star. Methods. We observed R CrA with the near-IR channels (IFS and IRDIS) of SPHERE at VLT. In this paper, we used four different epochs, three of them from open time observations while one is from the SPHERE guaranteed time. The data were reduced using the DRH pipeline and the SPHERE Data Center. On the reduced data we implemented custom IDL routines with the aim to subtract the speckle halo.We have also obtained pupil-tracking H-band (1.45-1.85 micron) observations with the VLT/SINFONI near-infrared medium-resolution (R~3000) spectrograph. Results. A companion was found at a separation of 0.156" from the star in the first epoch and increasing to 0.18400 in the final one. Furthermore, several extended structures were found around the star, the most noteworthy of which is a very bright jet-like structure North-East from the star. The astrometric measurements of the companion in the four epochs confirm that it is gravitationally bound to the star. The SPHERE photometry and the SINFONI spectrum, once corrected for extinction, point toward an early M spectral type object with a mass between 0.3 and 0.55 M?. The astrometric analyis provides constraints on the orbit paramenters: e~0.4, semi-major axis at 27-28 au, inclination of ~ 70° and a period larger than 30 years. We were also able to put constraints of few MJup on the mass of possible other companions down to separations of few tens of au.
△ Less
Submitted 7 February, 2019;
originally announced February 2019.
-
Design and modelling of spectrographs with holographic gratings on freeform surfaces
Authors:
Eduard R. Muslimov,
Marc Ferrari,
Emmanuel Hugot,
Jean-Claude Bouret,
Coralie Neiner,
Simona Lombardo,
Gerard Lemaitre,
Robert Grange,
Ilya A. Guskov
Abstract:
In the present paper we demonstrate the approach of using a holographic grating on a freeform surface for advanced spectrographs design. We discuss the surface and groove pattern description used for ray-tracing. Moreover, we present a general procedure of diffraction efficiency calculation, which accounts for the change of hologram recording and operation conditions across the surface. The primar…
▽ More
In the present paper we demonstrate the approach of using a holographic grating on a freeform surface for advanced spectrographs design. We discuss the surface and groove pattern description used for ray-tracing. Moreover, we present a general procedure of diffraction efficiency calculation, which accounts for the change of hologram recording and operation conditions across the surface. The primary application of this approach is the optical design of the POLLUX spectropolarimeter for the LUVOR mission project where a freeform holographic grating operates simultaneously as a cross-disperser and a camera with high resolution and high dispersion. The medium ultraviolet channel design of POLLUX is considered in detail as an example. Its resolving power reaches [126,000-133,000] in the region of 118.5-195 nm. Also, we show a possibility to use a similar element working in transmission to build an unobscured double-Schmidt spectrograph. The spectral resolving power reaches 4000 in the region 350-550 nm and remains stable along the slit.
△ Less
Submitted 26 December, 2018;
originally announced December 2018.
-
A search for accreting young companions embedded in circumstellar disks: High-contrast H$α$ imaging with VLT/SPHERE
Authors:
G. Cugno,
S. P. Quanz,
S. Hunziker,
T. Stolker,
H. M. Schmid,
H. Avenhaus,
P. Baudoz,
A. J. Bohn,
M. Bonnefoy,
E. Buenzli,
G. Chauvin,
A. Cheetham,
S. Desidera,
C. Dominik,
P. Feautrier,
M. Feldt,
C. Ginski,
J. H. Girard,
R. Gratton,
J. Hagelberg,
E. Hugot,
M. Janson,
A. -M. Lagrange,
M. Langlois,
Y. Magnard
, et al. (15 additional authors not shown)
Abstract:
Aims: We want to detect and quantify observables related to accretion processes occurring locally in circumstellar disks, which could be attributed to young forming planets. We focus on objects known to host protoplanet candidates and/or disk structures thought to be the result of interactions with planets. Methods: We analyzed observations of 6 young stars (age $3.5-10$ Myr) and their surrounding…
▽ More
Aims: We want to detect and quantify observables related to accretion processes occurring locally in circumstellar disks, which could be attributed to young forming planets. We focus on objects known to host protoplanet candidates and/or disk structures thought to be the result of interactions with planets. Methods: We analyzed observations of 6 young stars (age $3.5-10$ Myr) and their surrounding environments with the SPHERE/ZIMPOL instrument on the VLT in the H$α$ filter (656 nm) and a nearby continuum filter (644.9 nm). Results: We re-detect the known accreting M-star companion HD142527 B with the highest published signal to noise to date in both H$α$ and the continuum. We derive new astrometry ($r = 62.8^{+2.1}_{-2.7}$ mas and $\text{PA} = (98.7\,\pm1.8)^\circ$) and photometry ($Δ$N_Ha=$6.3^{+0.2}_{-0.3}$ mag, $Δ$B_Ha=$6.7\pm0.2$ mag and $Δ$Cnt_Ha=$7.3^{+0.3}_{-0.2}$ mag) for the companion in agreement with previous studies, and estimate its mass accretion rate ($\dot{M}\approx1-2\,\times10^{-10}\,M_\odot\text{ yr}^{-1}$). A faint point-like source around HD135344 B (SAO206462) is also investigated, but a second deeper observation is required to reveal its nature. No other companions are detected. In the framework of our assumptions we estimate detection limits at the locations of companion candidates around HD100546, HD169142 and MWC758 and calculate that processes involving H$α$ fluxes larger than $\sim8\times10^{-14}-10^{-15}\,\text{erg/s/cm}^2$ ($\dot{M}>10^{-10}-10^{-12}\,M_\odot\text{ yr}^{-1}$) can be excluded. Furthermore, flux upper limits of $\sim10^{-14}-10^{-15}\,\text{erg/s/cm}^2$ ($\dot{M}<10^{-11}-10^{-12}\,M_\odot \text{ yr}^{-1}$) are estimated within the gaps identified in the disks surrounding HD135344B and TW Hya.
△ Less
Submitted 14 February, 2019; v1 submitted 17 December, 2018;
originally announced December 2018.
-
Post conjunction detection of $β$ Pictoris b with VLT/SPHERE
Authors:
A. -M. Lagrange,
A. Boccaletti,
M. Langlois,
G. Chauvin,
R. Gratton,
H. Beust,
S. Desidera,
J. Milli,
M. Bonnefoy,
A. Cheetham,
M. Feldt,
M. Meyer,
A. Vigan,
B. Biller,
M. Bonavita,
J. -L. Baudino,
F. Cantalloube,
M. Cudel,
S. Daemgen,
P. Delorme,
V. D'Orazi,
J. Girard,
C. Fontanive,
J. Hagelberg,
M. Janson
, et al. (80 additional authors not shown)
Abstract:
With an orbital distance comparable to that of Saturn in the solar system, \bpic b is the closest (semi-major axis $\simeq$\,9\,au) exoplanet that has been imaged to orbit a star. Thus it offers unique opportunities for detailed studies of its orbital, physical, and atmospheric properties, and of disk-planet interactions. With the exception of the discovery observations in 2003 with NaCo at the Ve…
▽ More
With an orbital distance comparable to that of Saturn in the solar system, \bpic b is the closest (semi-major axis $\simeq$\,9\,au) exoplanet that has been imaged to orbit a star. Thus it offers unique opportunities for detailed studies of its orbital, physical, and atmospheric properties, and of disk-planet interactions. With the exception of the discovery observations in 2003 with NaCo at the Very Large Telescope (VLT), all following astrometric measurements relative to \bpic have been obtained in the southwestern part of the orbit, which severely limits the determination of the planet's orbital parameters. We aimed at further constraining \bpic b orbital properties using more data, and, in particular, data taken in the northeastern part of the orbit.
We used SPHERE at the VLT to precisely monitor the orbital motion of beta \bpic b since first light of the instrument in 2014. We were able to monitor the planet until November 2016, when its angular separation became too small (125 mas, i.e., 1.6\,au) and prevented further detection. We redetected \bpic b on the northeast side of the disk at a separation of 139\,mas and a PA of 30$^{\circ}$ in September 2018. The planetary orbit is now well constrained. With a semi-major axis (sma) of $a = 9.0 \pm 0.5$ au (1 $σ$), it definitely excludes previously reported possible long orbital periods, and excludes \bpic b as the origin of photometric variations that took place in 1981. We also refine the eccentricity and inclination of the planet. From an instrumental point of view, these data demonstrate that it is possible to detect, if they exist, young massive Jupiters that orbit at less than 2 au from a star that is 20 pc away.
△ Less
Submitted 10 December, 2018; v1 submitted 21 September, 2018;
originally announced September 2018.
-
SPHERE on-sky performance compared with budget predictions
Authors:
Kjetil Dohlen,
Arthur Vigan,
David Mouillet,
Francois Wildi,
Jean-Francois Sauvage,
Thierry Fusco,
Jean-Luc Beuzit,
Pascal Puget,
David Le Mignant,
Ronald Roelfsema,
Johan Pragt,
Hands Martin Schmid,
Raffaele Gratton,
Dino Mesa,
Riccardo Claudi,
Maud Langlois,
Anne Costille,
Emmanuel Hugot,
Jared O'Neil,
Juan Carlos Guerra,
Mamadou N'Diaye,
Julien Girard,
Dimitri Mawet,
Gerard Zins
Abstract:
The SPHERE (spectro-photometric exoplanet research) extreme-AO planet hunter saw first light at the VLT observatory on Mount Paranal in May 2014 after ten years of development. Great efforts were put into modelling its performance, particularly in terms of achievable contrast, and to budgeting instrumental features such as wave front errors and optical transmission to each of the instrument's thre…
▽ More
The SPHERE (spectro-photometric exoplanet research) extreme-AO planet hunter saw first light at the VLT observatory on Mount Paranal in May 2014 after ten years of development. Great efforts were put into modelling its performance, particularly in terms of achievable contrast, and to budgeting instrumental features such as wave front errors and optical transmission to each of the instrument's three focal planes, the near infrared dual imaging camera IRDIS, the near infrared integral field spectrograph IFS and the visible polarimetric camera ZIMPOL. In this paper we aim at comparing predicted performance with measured performance. In addition to comparing on-sky contrast curves and calibrated transmission measurements, we also compare the PSD-based wave front error budget with in-situ wave front maps obtained thanks to a Zernike phase mask, ZELDA, implemented in the infrared coronagraph wheel. One of the most critical elements of the SPHERE system is its high-order deformable mirror, a prototype 40x40 actuator piezo stack design developed in parallel with the instrument itself. The development was a success, as witnessed by the instrument performance, in spite of some bad surprises discovered on the way. The devastating effects of operating without taking properly into account the loss of several actuators and the thermally and temporally induced variations in the DM shape will be analysed, and the actions taken to mitigate these defects through the introduction of specially designed Lyot stops and activation of one of the mirrors in the optical train will be described.
△ Less
Submitted 11 July, 2018;
originally announced July 2018.
-
Curved detectors developments and characterization: application to astronomical instruments
Authors:
Simona Lombardo,
Thibault Behaghel,
Bertrand Chambion,
Wilfried Jahn,
Emmanuel Hugot,
Eduard Muslimov,
Melanie Roulet,
Marc Ferrari,
Christophe Gaschet,
Stéphane Caplet,
David Henry
Abstract:
Many astronomical optical systems have the disadvantage of generating curved focal planes requiring flattening optical elements to project the corrected image on flat detectors. The use of these designs in combination with a classical flat sensor implies an overall degradation of throughput and system performances to obtain the proper corrected image. With the recent development of curved sensor t…
▽ More
Many astronomical optical systems have the disadvantage of generating curved focal planes requiring flattening optical elements to project the corrected image on flat detectors. The use of these designs in combination with a classical flat sensor implies an overall degradation of throughput and system performances to obtain the proper corrected image. With the recent development of curved sensor this can be avoided. This new technology has been gathering more and more attention from a very broad community, as the potential applications are multiple: from low-cost commercial to high impact scientific systems, to mass-market and on board cameras, defense and security, and astronomical community. We describe here the first concave curved CMOS detector developed within a collaboration between CNRS- LAM and CEA-LETI. This fully-functional detector 20 Mpix (CMOSIS CMV20000) has been curved down to a radius of Rc = 150 mm over a size of 24x32 mm^2 . We present here the methodology adopted for its characterization and describe in detail all the results obtained. We also discuss the main components of noise, such as the readout noise, the fixed pattern noise and the dark current. Finally we provide a comparison with the flat version of the same sensor in order to establish the impact of the curving process on the main characteristics of the sensor.
△ Less
Submitted 5 July, 2018;
originally announced July 2018.
-
Discovery of a planetary-mass companion within the gap of the transition disk around PDS 70
Authors:
M. Keppler,
M. Benisty,
A. Müller,
Th. Henning,
R. van Boekel,
F. Cantalloube,
C. Ginski,
R. G. van Holstein,
A. -L. Maire,
A. Pohl,
M. Samland,
H. Avenhaus,
J. -L. Baudino,
A. Boccaletti,
J. de Boer,
M. Bonnefoy,
G. Chauvin,
S. Desidera,
M. Langlois,
C. Lazzoni,
G. Marleau,
C. Mordasini,
N. Pawellek,
T. Stolker,
A. Vigan
, et al. (101 additional authors not shown)
Abstract:
Young circumstellar disks are of prime interest to understand the physical and chemical conditions under which planet formation takes place. Only very few detections of planet candidates within these disks exist, and most of them are currently suspected to be disk features. In this context, the transition disk around the young star PDS 70 is of particular interest, due to its large gap identified…
▽ More
Young circumstellar disks are of prime interest to understand the physical and chemical conditions under which planet formation takes place. Only very few detections of planet candidates within these disks exist, and most of them are currently suspected to be disk features. In this context, the transition disk around the young star PDS 70 is of particular interest, due to its large gap identified in previous observations, indicative of ongoing planet formation. We aim to search for the presence of planets and search for disk structures indicative for disk-planet interactions and other evolutionary processes. We analyse new and archival near-infrared (NIR) images of the transition disk PDS 70 obtained with the VLT/SPHERE, VLT/NaCo and Gemini/NICI instruments in polarimetric differential imaging (PDI) and angular differential imaging (ADI) modes. We detect a point source within the gap of the disk at about 195 mas (about 22 au) projected separation. The detection is confirmed at five different epochs, in three filter bands and using different instruments. The astrometry results in an object of bound nature, with high significance. The comparison of the measured magnitudes and colours to evolutionary tracks suggests that the detection is a companion of planetary mass. We confirm the detection of a large gap of about 54 au in size within the disk in our scattered light images, and detect a signal from an inner disk component. We find that its spatial extent is very likely smaller than about 17 au in radius. The images of the outer disk show evidence of a complex azimuthal brightness distribution which may in part be explained by Rayleigh scattering from very small grains. Future observations of this system at different wavelengths and continuing astrometry will allow us to test theoretical predictions regarding planet-disk interactions, planetary atmospheres and evolutionary models.
△ Less
Submitted 12 July, 2018; v1 submitted 29 June, 2018;
originally announced June 2018.
-
Design of optical systems with toroidal curved detectors
Authors:
Eduard Muslimov,
Emmanuel Hugot,
Marc Ferrari,
Thibault Behaghel,
Gerard R. Lemaitre,
Melanie Roulet,
Simona Lombardo
Abstract:
We consider using toroidal curved detectors to improve the performance of imaging optical systems. We demonstrate that some optical systems have an anamorphic field curvature. We consider an unobscured re-imaging three-mirror anastigmat as an example (f'=960 mm, F/5.3, FoV 4x4 degrees). By assuming that the image is focused on a toroidal detector surface and perform re-optimization, it becomes pos…
▽ More
We consider using toroidal curved detectors to improve the performance of imaging optical systems. We demonstrate that some optical systems have an anamorphic field curvature. We consider an unobscured re-imaging three-mirror anastigmat as an example (f'=960 mm, F/5.3, FoV 4x4 degrees). By assuming that the image is focused on a toroidal detector surface and perform re-optimization, it becomes possible to obtain a notable gain in the image quality - up to 40 % in terms of the spot RMS radius. Through analytic computations and finite-element analysis, we demonstrate that this toroidal shape can be obtained by bending of a thinned detector in a relatively simple setup.
△ Less
Submitted 21 June, 2018;
originally announced June 2018.
-
The adaptive optics modes for HARMONI: from Classical to Laser Assisted Tomographic AO
Authors:
B. Neichel,
T. Fusco,
J. -F. Sauvage,
C. Correia,
K. Dohlen,
K. El-Hadi,
L. Blanco,
N. Schwartz,
F. Clarke,
N. Thatte,
M. Tecza,
J. Paufique,
J. Vernet,
M. Le Louarn,
P. Hammersley,
J. -L. Gach,
S. Pascal,
P. Vola,
C. Petit,
J. -M. Conan,
A. Carlotti,
C. Verinaud,
H. Schnetler,
I. Bryson,
T. Morris
, et al. (3 additional authors not shown)
Abstract:
HARMONI is a visible and NIR integral field spectrograph, providing the E-ELT's core spectroscopic capability at first light. HARMONI will work at the diffraction limit of the E-ELT, thanks to a Classical and a Laser Tomographic AO system. In this paper, we present the system choices that have been made for these SCAO and LTAO modules. In particular, we describe the strategy developed for the diff…
▽ More
HARMONI is a visible and NIR integral field spectrograph, providing the E-ELT's core spectroscopic capability at first light. HARMONI will work at the diffraction limit of the E-ELT, thanks to a Classical and a Laser Tomographic AO system. In this paper, we present the system choices that have been made for these SCAO and LTAO modules. In particular, we describe the strategy developed for the different Wave-Front Sensors: pyramid for SCAO, the LGSWFS concept, the NGSWFS path, and the truth sensor capabilities. We present first potential implementations. And we asses the first system performance.
△ Less
Submitted 30 May, 2018;
originally announced May 2018.
-
Spectrographs with holographic gratings on freeform surfaces: design approach and application for the LUVOIR mission
Authors:
Eduard Muslimov,
Marc Ferrari,
Emmanuel Hugot,
Jean-Claude Bouret,
Coralie Neiner,
Simona Lombardo,
Gerard Lemaitre,
Robert Grange
Abstract:
In the present paper we demonstrate the approach to use a holographic grating on a freeform surface for advanced spectrographs design. On the example POLLUX spectropolarimeter medium-UV channel we chow that such a grating can operate as a cross-disperser and a camera mirror at the same time. It provides the image quality high enough to reach the spectral resolving power of 126 359-133 106 between…
▽ More
In the present paper we demonstrate the approach to use a holographic grating on a freeform surface for advanced spectrographs design. On the example POLLUX spectropolarimeter medium-UV channel we chow that such a grating can operate as a cross-disperser and a camera mirror at the same time. It provides the image quality high enough to reach the spectral resolving power of 126 359-133 106 between 11.5 and 195 nm, which is higher than the requirement. Also we show a possibility to use a similar element working in transmission to build an unobscured double-Schmidt spectrograph. The spectral resolving power reaches 2750 for a long slit. It is also shown that the parameters of both the gratings are feasible with the current technologies.
△ Less
Submitted 23 May, 2018;
originally announced May 2018.
-
Advanced optical designs of curved detectors-based two-mirrors unobscured telescopes
Authors:
Eduard Muslimov,
Emmanuel Hugot,
Simona Lombardo,
Melanie Roulet,
Thibault Behaghel,
Marc Ferrari,
Wilfried Jahn
Abstract:
In the present paper we consider a family of unobscured telescope designs with curved detectors. They are based on classical two-mirror schemes -- Ritchey-Chretien, Gregorian and Couder telescopes. It is shown that all the designs provide nearly diffraction limited image quality in the visible domain for $.4^\circ \times .4^\circ$ field of view with the f-number of 7. We also provide a brief ghost…
▽ More
In the present paper we consider a family of unobscured telescope designs with curved detectors. They are based on classical two-mirror schemes -- Ritchey-Chretien, Gregorian and Couder telescopes. It is shown that all the designs provide nearly diffraction limited image quality in the visible domain for $.4^\circ \times .4^\circ$ field of view with the f-number of 7. We also provide a brief ghost analysis and point on special features of the systems with curved detectors. Finally, the detector surface shape obtained in each case is analyzed and its' technological feasibility is demonstrated.
△ Less
Submitted 23 May, 2018;
originally announced May 2018.
-
Curved detectors for wide field imaging systems: impact on tolerance analysis
Authors:
Eduard Muslimov,
Emmanuel Hugot,
Simona Lombardo,
Melanie Roulet,
Thibault Behaghel,
Marc Ferrari,
Wilfried Jahn,
Christophe Gaschet,
Bertrand Chambion,
David Henry
Abstract:
In the present paper we consider quantitative estimation of the tolerances widening in optical systems with curved detectors. The gain in image quality allows to loosen the margins for manufacturing and assembling errors. On another hand, the requirements for the detector shape and positioning become more tight. We demonstrate both of the effects on example of two optical designs. The first one is…
▽ More
In the present paper we consider quantitative estimation of the tolerances widening in optical systems with curved detectors. The gain in image quality allows to loosen the margins for manufacturing and assembling errors. On another hand, the requirements for the detector shape and positioning become more tight. We demonstrate both of the effects on example of two optical designs. The first one is a rotationally-symmetrical lens with focal length of 25 mm, f-ratio of 3.5 and field of view equal to 72$^\circ$, working in the visible domain. The second design is a three-mirror anastigmat telescope with focal length of 250 mm, f-ratio of 2.0 and field of view equal to $4^\circ \times 4^\circ$. In both of the cases use of curved detectors allow to increase the image quality and substantially decrease the requirements for manufacturing precision
△ Less
Submitted 23 May, 2018;
originally announced May 2018.
-
POLLUX: a UV spectropolarimeter for the LUVOIR space telescope project
Authors:
Eduard Muslimov,
Jean-Claude Bouret,
Coralie Neiner,
Arturo López Ariste,
Marc Ferrari,
Sébastien Vivès,
Emmanuel Hugot,
Robert Grange,
Simona Lombardo,
Louise Lopes,
Josiane Costerate,
Frank Brachet
Abstract:
The present paper describes the current baseline optical design of POLLUX, a high-resolution spectropolarimeter for the future LUVOIR mission. The instrument will operate in the ultraviolet (UV) domain from 90 to 390 nm in both spectropolarimetric and pure spectroscopic modes. The working range is split between 3 channels -- far (90-124.5 nm), medium (118.5-195 nm) and near (195-390 nm) UV. Each o…
▽ More
The present paper describes the current baseline optical design of POLLUX, a high-resolution spectropolarimeter for the future LUVOIR mission. The instrument will operate in the ultraviolet (UV) domain from 90 to 390 nm in both spectropolarimetric and pure spectroscopic modes. The working range is split between 3 channels -- far (90-124.5 nm), medium (118.5-195 nm) and near (195-390 nm) UV. Each of the channels is composed of a polarimeter followed by an echelle spectrograph consisting of a classical off-axis paraboloid collimator, echelle grating with a high grooves frequency and a cross-disperser grating operating also as a camera. The latter component integrates some advanced technologies: it is a blazed grating with a complex grooves pattern formed by holographic recording, which is manufactured on a freeform surface. One of the key features underlying the current design is the large spectral length of each order ~6 nm, which allows to record wide spectral lines without any discontinuities. The modelling results show that the optical design will provide the required spectral resolving power higher than R ~ 120,000 over the entire working range for a point source object with angular size of 30 mas. It is also shown that with the 15-m primary mirror of the LUVOIR telescope the instrument will provide an effective collecting area up to 38 569 cm 2. Such a performance will allow to perform a number of groundbreaking scientific observations. Finally, the future work and the technological risks of the design are discussed in details.
△ Less
Submitted 23 May, 2018;
originally announced May 2018.
-
Orbital and spectral analysis of the benchmark brown dwarf HD 4747B
Authors:
S. Peretti,
D. Ségransan,
B. Lavie,
S. Desidera,
A. -L. Maire,
V. D'Orazi,
A. Vigan,
J. -L. Baudino,
A. Cheetham,
M. Janson,
G. Chauvin,
J. Hagelberg,
F. Menard,
K. Heng,
S. Udry,
A. Boccaletti,
S. Daemgen,
H. Le Coroller,
D. Mesa,
D. Rouan,
M. Samland,
T. Schmidt,
A. Zurlo,
M. Bonnefoy,
M. Feldt
, et al. (21 additional authors not shown)
Abstract:
The study of high contrast imaged brown dwarfs and exoplanets depends strongly on evolutionary models. To estimate the mass of a directly imaged substellar object, its extracted photometry or spectrum is used and adjusted with model spectra together with the estimated age of the system. These models still need to be properly tested and constrained. HD 4747B is a brown dwarf close to the H burning…
▽ More
The study of high contrast imaged brown dwarfs and exoplanets depends strongly on evolutionary models. To estimate the mass of a directly imaged substellar object, its extracted photometry or spectrum is used and adjusted with model spectra together with the estimated age of the system. These models still need to be properly tested and constrained. HD 4747B is a brown dwarf close to the H burning mass limit, orbiting a nearby, solar-type star and has been observed with the radial velocity method over almost two decades now. Its companion was also recently detected by direct imaging, allowing a complete study of this particular object. We aim to fully characterize HD 4747B by combining a well constrained dynamical mass and a study of its observed spectral features in order to test evolutionary models for substellar objects and characterize its atmosphere. We combine the radial velocity measurements of HIRES and CORALIE taken over two decades and high contrast imaging of several epochs from NACO, NIRC2 and SPHERE to obtain a dynamical mass. From the SPHERE data we obtain a low resolution spectrum of the companion from Y to H band, as well as two narrow band-width photometric measurements in the K band. A study of the primary star allows in addition to constrain the age of the system as well as its distance. Thanks to the new SPHERE epoch and NACO archival data combined with previous imaging data and high precision radial velocity measurements, we have been able to derive a well constrained orbit. We derive a dynamical mass of mB=70.0$\pm$1.6 MJup which is higher than a previous study, but in better agreement with the models. By comparing the object with known brown dwarfs spectra, we derive a spectral type of L9 and an effective temperature of 1350$\pm$50 K. With a retrieval analysis we constrain the oxygen and carbon abundances and compare them with the ones from the HR 8799 planets.
△ Less
Submitted 15 May, 2018;
originally announced May 2018.
-
Discovery of a brown dwarf companion to the star HIP 64892
Authors:
A. Cheetham,
M. Bonnefoy,
S. Desidera,
M. Langlois,
A. Vigan,
T. Schmidt,
J. Olofsson,
G. Chauvin,
H. Klahr,
R. Gratton,
V. D'Orazi,
T. Henning,
M. Janson,
B. Biller,
S. Peretti,
J. Hagelberg,
D. Ségransan,
S. Udry,
D. Mesa,
E. Sissa,
Q. Kral,
J. Schlieder,
A. -L. Maire,
C. Mordasini,
F. Menard
, et al. (67 additional authors not shown)
Abstract:
We report the discovery of a bright, brown dwarf companion to the star HIP 64892, imaged with VLT/SPHERE during the SHINE exoplanet survey. The host is a B9.5V member of the Lower-Centaurus-Crux subgroup of the Scorpius Centaurus OB association. The measured angular separation of the companion ($1.2705\pm0.0023$") corresponds to a projected distance of $159\pm12$ AU. We observed the target with th…
▽ More
We report the discovery of a bright, brown dwarf companion to the star HIP 64892, imaged with VLT/SPHERE during the SHINE exoplanet survey. The host is a B9.5V member of the Lower-Centaurus-Crux subgroup of the Scorpius Centaurus OB association. The measured angular separation of the companion ($1.2705\pm0.0023$") corresponds to a projected distance of $159\pm12$ AU. We observed the target with the dual-band imaging and long-slit spectroscopy modes of the IRDIS imager to obtain its SED and astrometry. In addition, we reprocessed archival NACO L-band data, from which we also recover the companion. Its SED is consistent with a young (<30 Myr), low surface gravity object with a spectral type of M9$_γ\pm1$. From comparison with the BT-Settl atmospheric models we estimate an effective temperature of $T_{\textrm{eff}}=2600 \pm 100$ K, and comparison of the companion photometry to the COND evolutionary models yields a mass of $\sim29-37$ M$_{\text{J}}$ at the estimated age of $16^{+15}_{-7}$ Myr for the system. HIP 64892 is a rare example of an extreme-mass ratio system ($q\sim0.01$) and will be useful for testing models relating to the formation and evolution of such low-mass objects.
△ Less
Submitted 7 March, 2018;
originally announced March 2018.
-
Design of pre-optics for laser guide star wavefront sensor for the ELT
Authors:
Eduard Muslimov,
Kjetil Dohlen,
Benoit Neichel,
Emmanuel Hugot
Abstract:
In the present paper, we consider the optical design of a zoom system for the active refocusing in laser guide star wavefront sensors. The system is designed according to the specifications coming from the Extremely Large Telescope (ELT)-HARMONI instrument, the first-light, integral field spectrograph for the European (E)-ELT. The system must provide a refocusing of the laser guide as a function o…
▽ More
In the present paper, we consider the optical design of a zoom system for the active refocusing in laser guide star wavefront sensors. The system is designed according to the specifications coming from the Extremely Large Telescope (ELT)-HARMONI instrument, the first-light, integral field spectrograph for the European (E)-ELT. The system must provide a refocusing of the laser guide as a function of telescope pointing and large decentring of the incoming beam. The system considers four moving lens groups, each of them being a doublet with one aspherical surface. The advantages and shortcomings of such a solution in terms of the component displacements and complexity of the surfaces are described in detail. It is shown that the system can provide the median value of the residual wavefront error of 13.8-94.3 nm and the maximum value <206 nm, while the exit pupil distortion is 0.26-0.36% for each of the telescope pointing directions.
△ Less
Submitted 16 November, 2017;
originally announced November 2017.
-
A fast, wide-field and distortion-free telescope with curved detectors for surveys at ultra-low surface brightness
Authors:
Eduard Muslimov,
David Valls-Gabaud,
Gérard Lemaître,
Emmanuel Hugot,
Wilfred Jahn,
Simona Lombardo,
Xin Wang,
Pascal Vola,
Marc Ferrari
Abstract:
We present the design of an all-reflective, bi-folded Schmidt telescope aimed at surveys of extended astronomical objects with extremely-low surface brightness. The design leads to a high image quality without any diffracting spider, along with a large aperture and field of view, with a small central obstruction which barely alters the PSF. As an example, we present the design of a high-quality, 3…
▽ More
We present the design of an all-reflective, bi-folded Schmidt telescope aimed at surveys of extended astronomical objects with extremely-low surface brightness. The design leads to a high image quality without any diffracting spider, along with a large aperture and field of view, with a small central obstruction which barely alters the PSF. As an example, we present the design of a high-quality, 36 cm diameter, fast ( f /2.5) telescope working in the visible with a large field of view (1.6°x 2.6°). The telescope can operate with a curved detector (or with a flat detector with a field flattener) and a set of filters. The entrance mirror is anamorphic and replaces the classical Schmidt entrance corrector plate. We show that this anamorphic primary mirror can be manufactured through stress polishing, avoiding high spatial frequency errors, and tested with a simple interferometer scheme. This prototype is intended to serve as a fast-track scientific and technological pathfinder for the future space-based MESSIER mission.
△ Less
Submitted 25 October, 2017; v1 submitted 24 October, 2017;
originally announced October 2017.
-
Discovery of a warm, dusty giant planet around HIP65426
Authors:
G. Chauvin,
S. Desidera,
A. -M. Lagrange,
A. Vigan,
R. Gratton,
M. Langlois,
M. Bonnefoy,
J. -L. Beuzit,
M. Feldt,
D. Mouillet,
M. Meyer,
A. Cheetham,
B. Biller,
A. Boccaletti,
V. D'Orazi,
R. Galicher,
J. Hagelberg,
A. -L. Maire,
D. Mesa,
J. Olofsson,
M. Samland,
T. O. B. Schmidt,
E. Sissa,
M. Bonavita,
B. Charnay
, et al. (98 additional authors not shown)
Abstract:
The SHINE program is a large high-contrast near-infrared survey of 600 young, nearby stars. It is aimed at searching for and characterizing new planetary systems using VLT/SPHERE's unprecedented high-contrast and high-angular resolution imaging capabilities. It also intends at placing statistical constraints on the occurrence and orbital properties of the giant planet population at large orbits as…
▽ More
The SHINE program is a large high-contrast near-infrared survey of 600 young, nearby stars. It is aimed at searching for and characterizing new planetary systems using VLT/SPHERE's unprecedented high-contrast and high-angular resolution imaging capabilities. It also intends at placing statistical constraints on the occurrence and orbital properties of the giant planet population at large orbits as a function of the stellar host mass and age to test planet formation theories. We use the IRDIS dual-band imager and the IFS integral field spectrograph of SPHERE to acquire high-constrast coronagraphic differential near-infrared images and spectra of the young A2 star HIP65426. It is a member of the ~17 Myr old Lower Centaurus-Crux association. At a separation of 830 mas (92 au projected) from the star, we detect a faint red companion. Multi-epoch observations confirm that it shares common proper motion with HIP65426. Spectro-photometric measurements extracted with IFS and IRDIS between 0.95 and 2.2um indicate a warm, dusty atmosphere characteristic of young low surface-gravity L5-L7 dwarfs. Hot-start evolutionary models predict a luminosity consistent with a 6-12 MJup, Teff=1300-1600 K and R=1.5 RJup giant planet. Finally, the comparison with Exo-REM and PHOENIX BT-Settl synthetic atmosphere models gives consistent effective temperatures but with slightly higher surface gravity solutions of log(g)=4.0-5.0 with smaller radii (1.0-1.3 RJup). Given its physical and spectral properties, HIP65426b occupies a rather unique placement in terms of age, mass and spectral-type among the currently known imaged planets. It represents a particularly interesting case to study the presence of clouds as a function of particle size, composition, and location in the atmosphere, to search for signatures of non-equilibrium chemistry, and finally to test the theory of planet formation and evolution.
△ Less
Submitted 11 December, 2017; v1 submitted 5 July, 2017;
originally announced July 2017.
-
Combining freeform optics and curved detectors for wide field imaging: a polynomial approach over squared aperture
Authors:
Eduard Muslimov,
Emmanuel Hugot,
Wilfried Jahn,
Sebastien Vives,
Marc Ferrari,
Bertrand Chambion,
David Henry,
Cristophe Gaschet
Abstract:
In the recent years a significant progress was achieved in the field of design and fabrication of optical systems based on freeform optical surfaces. They provide a possibility to build fast, wide-angle and high-resolution systems, which are very compact and free of obscuration. However, the field of freeform surfaces design techniques still remains underexplored. In the present paper we use the m…
▽ More
In the recent years a significant progress was achieved in the field of design and fabrication of optical systems based on freeform optical surfaces. They provide a possibility to build fast, wide-angle and high-resolution systems, which are very compact and free of obscuration. However, the field of freeform surfaces design techniques still remains underexplored. In the present paper we use the mathematical apparatus of orthogonal polynomials defined over a square aperture, which was developed before for the tasks of wavefront reconstruction, to describe shape of a mirror surface. Two cases, namely Legendre polynomials and generalization of the Zernike polynomials on a square, are considered. The potential advantages of these polynomials sets are demonstrated on example of a three-mirror unobscured telescope with F/#=2.5 and FoV=7.2x7.2°. In addition, we discuss possibility of use of curved detectors in such a design.
△ Less
Submitted 17 June, 2017;
originally announced June 2017.
-
Flexible focal plane arrays for UVOIR wide field instrumentation
Authors:
Emmanuel Hugot,
Wilfried Jahn,
Bertrand Chambion,
Gaid Moulin,
Liubov Nikitushkina,
Christophe Gaschet,
David Henry,
Stéphane Getin,
Marc Ferrari,
Yann Gaeremynck
Abstract:
LAM and CEA-LETI are develo** the technology of deformable detectors, for UV, VIS or NIR applications. Such breakthrough devices will be a revolution for future wide field imagers and spectrographs, firstly by improving the image quality with better off-axis sharpness, resolution, brightness while scaling down the optical system, secondly by overcoming the manufacturing issues identified so far…
▽ More
LAM and CEA-LETI are develo** the technology of deformable detectors, for UV, VIS or NIR applications. Such breakthrough devices will be a revolution for future wide field imagers and spectrographs, firstly by improving the image quality with better off-axis sharpness, resolution, brightness while scaling down the optical system, secondly by overcoming the manufacturing issues identified so far and by offering a flexibility and versatility in optical design. The technology of curved detectors can benefit of the developments of active and deformable structures, to provide a flexibility and a fine tuning of the detectors curvature by thinning down the substrate without modifying the fabrication process of the active pixels. We present studies done so far on optical design improvements, the technological demonstrators we developed and their performances as well as the future five-years roadmap for these developments.
△ Less
Submitted 21 July, 2016;
originally announced July 2016.
-
Apodization in high-contrast long-slit spectroscopy. II. Concept validation and first on-sky results with VLT/SPHERE
Authors:
A. Vigan,
M. N'Diaye,
K. Dohlen,
J. -L. Beuzit,
A. Costille,
A. Caillat,
A. Baruffolo,
P. Blanchard,
M. Carle,
M. Ferrari,
T. Fusco,
L. Gluck,
E. Hugot,
M. Jaquet,
M. Langlois,
D. Le Mignant,
M. Llored,
F. Madec,
D. Mouillet,
A. Origné,
P. Puget,
B. Salasnich,
J. -F. Sauvage
Abstract:
Spectral characterization of young, giant exoplanets detected by direct imaging is one of the tasks of the new generation of high-contrast imagers. For this purpose, the VLT/SPHERE instrument includes a unique long-slit spectroscopy (LSS) mode coupled with Lyot coronagraphy in its infrared dual-band imager and spectrograph (IRDIS). The performance of this mode is intrinsically limited by the use o…
▽ More
Spectral characterization of young, giant exoplanets detected by direct imaging is one of the tasks of the new generation of high-contrast imagers. For this purpose, the VLT/SPHERE instrument includes a unique long-slit spectroscopy (LSS) mode coupled with Lyot coronagraphy in its infrared dual-band imager and spectrograph (IRDIS). The performance of this mode is intrinsically limited by the use of a non-optimal coronagraph, but in a previous work we demonstrated that it could be significantly improved at small inner-working angles using the stop-less Lyot coronagraph (SLLC). We now present the development, testing, and validation of the first SLLC prototype for VLT/SPHERE. Based on the transmission profile previously proposed, the prototype was manufactured using microdots technology and was installed inside the instrument in 2014. The transmission measurements agree well with the specifications, except in the very low transmissions (<5% in amplitude). The performance of the SLLC is tested in both imaging and spectroscopy using data acquired on the internal source. In imaging, we obtain a raw contrast gain of a factor 10 at 0.3" and 5 at 0.5" with the SLLC. Using data acquired with a focal-plane mask, we also demonstrate that no Lyot stop is required to reach the full performance, which validates the SLLC concept. Comparison with a realistic simulation model shows that we are currently limited by the internal phase aberrations of SPHERE. In spectroscopy, we obtain a gain of ~1 mag in a limited range of angular separations. Simulations show that although the main limitation comes from phase errors, the performance in the non-SLLC case is very close to the ultimate limit of the LSS mode. Finally, we obtain the very first on-sky data with the SLLC, which appear extremely promising for the future scientific exploitation of an apodized LSS mode in SPHERE.
△ Less
Submitted 16 December, 2015;
originally announced December 2015.
-
First light of the VLT planet finder SPHERE. III. New spectrophotometry and astrometry of the HR8799 exoplanetary system
Authors:
A. Zurlo,
A. Vigan,
R. Galicher,
A. -L. Maire,
D. Mesa,
R. Gratton,
G. Chauvin,
M. Kasper,
C. Moutou,
M. Bonnefoy,
S. Desidera,
L. Abe,
D. Apai,
A. Baruffolo,
P. Baudoz,
J. Baudrand,
J. -L. Beuzit,
P. Blancard,
A. Boccaletti,
F. Cantalloube,
M. Carle,
J. Charton,
R. U. Claudi,
A. Costille,
V. de Caprio
, et al. (48 additional authors not shown)
Abstract:
The planetary system discovered around the young A-type HR8799 provides a unique laboratory to: a) test planet formation theories, b) probe the diversity of system architectures at these separations, and c) perform comparative (exo)planetology. We present and exploit new near-infrared images and integral-field spectra of the four gas giants surrounding HR8799 obtained with SPHERE, the new planet f…
▽ More
The planetary system discovered around the young A-type HR8799 provides a unique laboratory to: a) test planet formation theories, b) probe the diversity of system architectures at these separations, and c) perform comparative (exo)planetology. We present and exploit new near-infrared images and integral-field spectra of the four gas giants surrounding HR8799 obtained with SPHERE, the new planet finder instrument at the Very Large Telescope, during the commissioning and science verification phase of the instrument (July-December 2014). With these new data, we contribute to completing the spectral energy distribution of these bodies in the 1.0-2.5 $μ$m range. We also provide new astrometric data, in particular for planet e, to further constrain the orbits. We used the infrared dual-band imager and spectrograph (IRDIS) subsystem to obtain pupil-stabilized, dual-band $H2H3$ (1.593 $μ$m, 1.667 $μ$m), $K1K2$ (2.110 $μ$m, 2.251 $μ$m), and broadband $J$ (1.245 $μ$m) images of the four planets. IRDIS was operated in parallel with the integral field spectrograph (IFS) of SPHERE to collect low-resolution ($R\sim30$), near-infrared (0.94-1.64 $μ$m) spectra of the two innermost planets HR8799d and e. The data were reduced with dedicated algorithms, such as the Karhunen-Loève image projection (KLIP), to reveal the planets. We used the so-called negative planets injection technique to extract their photometry, spectra, and measure their positions. We illustrate the astrometric performance of SPHERE through sample orbital fits compatible with SPHERE and literature data.
△ Less
Submitted 29 January, 2021; v1 submitted 12 November, 2015;
originally announced November 2015.
-
First light of the VLT planet finder SPHERE. I. Detection and characterization of the sub-stellar companion GJ 758 B
Authors:
A. Vigan,
M. Bonnefoy,
C. Ginski,
H. Beust,
R. Galicher,
M. Janson,
J. -L. Baudino,
E. Buenzli,
J. Hagelberg,
V. D'Orazi,
S. Desidera,
A. -L. Maire,
R. Gratton,
J. -F. Sauvage,
G. Chauvin,
C. Thalmann,
L. Malo,
G. Salter,
A. Zurlo,
J. Antichi,
A. Baruffolo,
P. Baudoz,
P. Blanchard,
A. Boccaletti,
J. -L. Beuzit
, et al. (50 additional authors not shown)
Abstract:
GJ758 B is a brown dwarf companion to a nearby (15.76 pc) solar-type, metal-rich (M/H = +0.2 dex) main-sequence star (G9V) that was discovered with Subaru/HiCIAO in 2009. From previous studies, it has drawn attention as being the coldest (~600K) companion ever directly imaged around a neighboring star. We present new high-contrast data obtained during the commissioning of the SPHERE instrument at…
▽ More
GJ758 B is a brown dwarf companion to a nearby (15.76 pc) solar-type, metal-rich (M/H = +0.2 dex) main-sequence star (G9V) that was discovered with Subaru/HiCIAO in 2009. From previous studies, it has drawn attention as being the coldest (~600K) companion ever directly imaged around a neighboring star. We present new high-contrast data obtained during the commissioning of the SPHERE instrument at the VLT. The data was obtained in Y-, J-, H-, and Ks-bands with the dual-band imaging (DBI) mode of IRDIS, providing a broad coverage of the full near-infrared (near-IR) range at higher contrast and better spectral sampling than previously reported. In this new set of high-quality data, we report the re-detection of the companion, as well as the first detection of a new candidate closer-in to the star. We use the new 8 photometric points for an extended comparison of GJ758 B with empirical objects and 4 families of atmospheric models. From comparison to empirical object, we estimate a T8 spectral type, but none of the comparison object can accurately represent the observed near-IR fluxes of GJ758 B. From comparison to atmospheric models, we attribute a Teff = 600K $\pm$ 100K, but we find that no atmospheric model can adequately fit all the fluxes of GJ758 B. The photometry of the new candidate companion is broadly consistent with L-type objects, but a second epoch with improved photometry is necessary to clarify its status. The new astrometry of GJ758 B shows a significant proper motion since the last epoch. We use this result to improve the determination of the orbital characteristics using two fitting approaches, Least-Square Monte Carlo and Markov Chain Monte Carlo. Finally, we analyze the sensitivity of our data to additional closer-in companions and reject the possibility of other massive brown dwarf companions down to 4-5 AU. [abridged]
△ Less
Submitted 12 November, 2015;
originally announced November 2015.
-
First light of the VLT planet finder SPHERE. II. The physical properties and the architecture of the young systems PZ Tel and HD 1160 revisited
Authors:
A. -L. Maire,
M. Bonnefoy,
C. Ginski,
A. Vigan,
S. Messina,
D. Mesa,
R. Galicher,
R. Gratton,
S. Desidera,
T. G. Kopytova,
M. Millward,
C. Thalmann,
R. U. Claudi,
D. Ehrenreich,
A. Zurlo,
G. Chauvin,
J. Antichi,
A. Baruffolo,
A. Bazzon,
J. -L. Beuzit,
P. Blanchard,
A. Boccaletti,
J. de Boer,
M. Carle,
E. Cascone
, et al. (46 additional authors not shown)
Abstract:
[Abridged] Context. The young systems PZ Tel and HD 1160, hosting known low-mass companions, were observed during the commissioning of the new planet finder SPHERE with several imaging and spectroscopic modes. Aims. We aim to refine the physical properties and architecture of both systems. Methods. We use SPHERE commissioning data and REM observations, as well as literature and unpublished data fr…
▽ More
[Abridged] Context. The young systems PZ Tel and HD 1160, hosting known low-mass companions, were observed during the commissioning of the new planet finder SPHERE with several imaging and spectroscopic modes. Aims. We aim to refine the physical properties and architecture of both systems. Methods. We use SPHERE commissioning data and REM observations, as well as literature and unpublished data from VLT/SINFONI, VLT/NaCo, Gemini/NICI, and Keck/NIRC2. Results. We derive new photometry and confirm the nearly daily photometric variability of PZ Tel A. Using literature data spanning 38 yr, we show that the star also exhibits a long-term variability trend. The 0.63-3.8 mic SED of PZ Tel B allows us to revise its properties: spectral type M7+/-1, Teff=2700+/-100 K, log(g)<4.5 dex, log(L/L_Sun)=-2.51+/-0.10 dex, and mass 38-72 MJ. The 1-3.8 mic SED of HD 1160 B suggests a massive brown dwarf or a low-mass star with spectral type M5.5-7.0, Teff=3000+/-100 K, [M/H]=-0.5-0.0 dex, log(L/L_Sun)=-2.81+/-0.10 dex, and mass 39-168 MJ. We confirm the deceleration and high eccentricity (e>0.66) of PZ Tel B. For e<0.9, the inclination, longitude of the ascending node, and time of periastron passage are well constrained. The system is seen close to an edge-on geometry. We reject other brown dwarf candidates outside 0.25" for both systems, and massive giant planets (>4 MJ) outside 0.5" for the PZ Tel system. We also show that K1-K2 color can be used with YJH low-resolution spectra to identify young L-type companions, provided high photometric accuracy (<0.05 mag) is achieved. Conclusions. SPHERE opens new horizons in the study of young brown dwarfs and giant exoplanets thanks to high-contrast imaging capabilities at optical and near-infrared wavelengths, as well as high signal-to-noise spectroscopy in the near-infrared from low (R~30-50) to medium resolutions (R~350).
△ Less
Submitted 13 November, 2015; v1 submitted 12 November, 2015;
originally announced November 2015.
-
Active optics for high-dynamic variable curvature mirrors
Authors:
Emmanuel Hugot,
Marc Ferrari,
Gerard R. Lemaitre,
Fabrice Madec,
Sebastien Vives,
Elodie Chardin,
David Le Mignant,
Jean Gabriel Cuby
Abstract:
Variable curvature mirrors of large amplitude are designed by using finite element analysis. The specific case studied reaches at least a 800 μm sag with an optical quality better than λ/5 over a 120 mm clear aperture. We highlight the geometrical nonlinearity and the plasticity effect.
Variable curvature mirrors of large amplitude are designed by using finite element analysis. The specific case studied reaches at least a 800 μm sag with an optical quality better than λ/5 over a 120 mm clear aperture. We highlight the geometrical nonlinearity and the plasticity effect.
△ Less
Submitted 18 November, 2014;
originally announced November 2014.
-
Design and development of a freeform active mirror for an astronomy application
Authors:
Zalpha Challita,
Tibor Agócs,
Emmanuel Hugot,
Attila Jaskó,
Gabby Kroes,
William Taylor,
Chris Miller,
Hermine Schnetler,
Lars Venema,
Laszlo Mosoni,
David Le Mignant,
Marc Ferrari,
Jean-Gabriel Cuby
Abstract:
The advent of extremely large telescopes will bring unprecedented light-collecting power and spatial resolution, but it will also lead to a significant increase in the size and complexity of focal-plane instruments. The use of freeform mirrors could drastically reduce the number of components in optical systems. Currently, manufacturing issues limit the common use of freeform mirrors at short wave…
▽ More
The advent of extremely large telescopes will bring unprecedented light-collecting power and spatial resolution, but it will also lead to a significant increase in the size and complexity of focal-plane instruments. The use of freeform mirrors could drastically reduce the number of components in optical systems. Currently, manufacturing issues limit the common use of freeform mirrors at short wavelengths. This article outlines the use of freeform mirrors in astronomical instruments with a description of two efficient freeform optical systems. A new manufacturing method is presented which seeks to overcome the manufacturing issues through hydroforming of thin polished substrates. A specific design of an active array is detailed, which will compensate for residual manufacturing errors, thermoelastic deformation, and gravity-induced errors during observations. The combined hydroformed mirror and the active array comprise the Freeform Active Mirror Experiment, which will produce an accurate, compact, and stable freeform optics dedicated to visible and near-infrared observations.
△ Less
Submitted 17 November, 2014;
originally announced November 2014.
-
High-contrast imager for Complex Aperture Telescopes (HiCAT): 2. Design overview and first light results
Authors:
Mamadou N'Diaye,
Elodie Choquet,
Sylvain Egron,
Laurent Pueyo,
Lucie Leboulleux,
Olivier Levecq,
Marshall D. Perrin,
Erin Elliot,
J. Kent Wallace,
Emmanuel Hugot,
Michel Marcos,
Marc Ferrari,
Chris A. Long,
Rachel Anderson,
Audrey DiFelice,
Rémi Soummer
Abstract:
We present a new high-contrast imaging testbed designed to provide complete solutions in wavefront sensing, control and starlight suppression with complex aperture telescopes. The testbed was designed to enable a wide range of studies of the effects of such telescope geometries, with primary mirror segmentation, central obstruction, and spiders. The associated diffraction features in the point spr…
▽ More
We present a new high-contrast imaging testbed designed to provide complete solutions in wavefront sensing, control and starlight suppression with complex aperture telescopes. The testbed was designed to enable a wide range of studies of the effects of such telescope geometries, with primary mirror segmentation, central obstruction, and spiders. The associated diffraction features in the point spread function make high-contrast imaging more challenging. In particular the testbed will be compatible with both AFTA-like and ATLAST-like aperture shapes, respectively on-axis monolithic, and on-axis segmented telescopes. The testbed optical design was developed using a novel approach to define the layout and surface error requirements to minimize amplitude-induced errors at the target contrast level performance. In this communication we compare the as-built surface errors for each optic to their specifications based on end-to-end Fresnel modeling of the testbed. We also report on the testbed optical and optomechanical alignment performance, coronagraph design and manufacturing, and preliminary first light results.
△ Less
Submitted 3 July, 2014;
originally announced July 2014.
-
Mirror actively deformed and regulated for applications in space: design and performance
Authors:
Marie Laslandes,
Emmanuel Hugot,
Marc Ferrari,
Claire Hourtoule,
Christian Singer,
Christophe Devilliers,
Celine Lopez,
Frederic Chazallet
Abstract:
The need for both high quality images and lightweight structures is one of the main drivers in space telescope design. An efficient wavefront control system will become mandatory in future large observatories, retaining performance while relaxing specifications in the global system's stability. We present the mirror actively deformed and regulated for applications in space project, which aims to d…
▽ More
The need for both high quality images and lightweight structures is one of the main drivers in space telescope design. An efficient wavefront control system will become mandatory in future large observatories, retaining performance while relaxing specifications in the global system's stability. We present the mirror actively deformed and regulated for applications in space project, which aims to demonstrate the applicability of active optics for future space instrumentation. It has led to the development of a 24-actuator, 90-mm-diameter active mirror, able to compensate for large lightweight primary mirror deformations in the telescope's exit pupil. The correcting system has been designed for expected wavefront errors from 3-m-class lightweight primary mirrors, while also taking into account constraints for space use. Finite element analysis allowed an optimization of the system in order to achieve a precision of correction better than 10 nm rms. A dedicated testbed has been designed to fully characterize the integrated system performance in representative operating conditions. It is composed of: a telescope simulator, an active correction loop, a point spread function imager, and a Fizeau interferometer. All conducted tests demonstrated the correcting mirror performance and has improved this technology maturity to a TRL4.
△ Less
Submitted 2 May, 2013;
originally announced May 2013.
-
Active optics: deformable mirrors with a minimum number of actuators
Authors:
Marie Laslandes,
Emmanuel Hugot,
Marc Ferrari
Abstract:
We present two concepts of deformable mirror to compensate for first order optical aberrations. Deformation systems are designed using both elasticity theory and Finite Element Analysis in order to minimize the number of actuators. Starting from instrument specifications, we explain the methodology to design dedicated deformable mirrors. The work presented here leads to correcting devices optimize…
▽ More
We present two concepts of deformable mirror to compensate for first order optical aberrations. Deformation systems are designed using both elasticity theory and Finite Element Analysis in order to minimize the number of actuators. Starting from instrument specifications, we explain the methodology to design dedicated deformable mirrors. The work presented here leads to correcting devices optimized for specific functions. The Variable Off-Axis paraboLA concept is a 3-actuators, 3-modes system able to generate independently Focus, Astigmatism and Coma. The Correcting Optimized Mirror with a Single Actuator is a 1-actuator system able to generate a given combination of optical aberrations.
△ Less
Submitted 12 September, 2012;
originally announced September 2012.