Showing 1–12 of 12 results for author: Hong, W

Actuation system of the inertial sensor for high-precision space missions using torsion pendulum

Authors: Fangchao Yang, Yan Zhu, Xiaofei **, Yujie Zhao, Shixun Pei, Wei Hong

Abstract: Precision space inertial sensors are imperative to Earth geodesy missions, gravitational wave observations and several fundamental physics experiments in space. In these missions, the residual acceleration noise of the test mass(TM) caused by the forces from inertial sensor components and environment is supposed to be kept below a certain level. As a number of forces contributing to residual accel… ▽ More Precision space inertial sensors are imperative to Earth geodesy missions, gravitational wave observations and several fundamental physics experiments in space. In these missions, the residual acceleration noise of the test mass(TM) caused by the forces from inertial sensor components and environment is supposed to be kept below a certain level. As a number of forces contributing to residual acceleration are related to actuation system, develo** a precise actuation system to exclude any erroneous force and obtain an ultra sensitive value for TM acceleration noise is necessary and essential. However, it is difficult to test the actuation system on ground. In this paper, a torsion pendulum is established to test the influence of actuation system on TM torque noise and a closed-loop control system combined torsion pendulum and parts of actuation modules is designed to assess the performance of actuation control algorithm. The experimental results show that the parameters in an actuation system will introduce additional torque noise and the maximum noise can reach as much as 10^{-13}Nm /Hz^{1/2} at 1 mHz. The stable tracking error for the closed-loop system is about 10^{-7}, indicating that the combination system achieves good tracking performance and robustness for TM rotation control in different conditions of inertial sensors. △ Less

Submitted 10 July, 2024; v1 submitted 1 July, 2024; originally announced July 2024.

Comments: 9 pages, 14 figures

CSST large-scale structure analysis pipeline: I. constructing reference mock galaxy redshift surveys

Authors: Yizhou Gu, Xiaohu Yang, Jiaxin Han, Yirong Wang, Qingyang Li, Zhenlin Tan, Wenkang Jiang, Yaru Wang, Jiaqi Wang, Antonios Katsianis, Xiaoju Xu, Haojie Xu, Wensheng Hong, Houjun Mo, Run Wen, Xianzhong Zheng, Feng Shi, Pengjie Zhang, Zhongxu Zhai, Chengze Liu, Wenting Wang, Ying Zu, Hong Guo, Youcai Zhang, Yi Lu , et al. (7 additional authors not shown)

Abstract: In this paper, we set out to construct a set of reference mock galaxy redshift surveys (MGRSs) for the future Chinese Space-station Survey Telescope (CSST) observation, where subsequent survey selection effects can be added and evaluated. This set of MGRSs is generated using the dark matter subhalos extracted from a high-resolution Jiutian $N$-body simulation of the standard $Λ$CDM cosmogony with… ▽ More In this paper, we set out to construct a set of reference mock galaxy redshift surveys (MGRSs) for the future Chinese Space-station Survey Telescope (CSST) observation, where subsequent survey selection effects can be added and evaluated. This set of MGRSs is generated using the dark matter subhalos extracted from a high-resolution Jiutian $N$-body simulation of the standard $Λ$CDM cosmogony with $Ω_m=0.3111$, $Ω_Λ=0.6889$, and $σ_8=0.8102$. The simulation has a boxsize of $1~h^{-1} {\rm Gpc}$, and consists of $6144^3$ particles with mass resolution $3.723 \times 10^{8} h^{-1} M_\odot $. In order to take into account the effect of redshift evolution, we first use all 128 snapshots in the Jiutian simulation to generate a light-cone halo/subhalo catalog. Next, galaxy luminosities are assigned to the main and subhalo populations using the subhalo abundance matching (SHAM) method with the DESI $z$-band luminosity functions at different redshifts. Multi-band photometries, as well as images, are then assigned to each mock galaxy using a 3-dimensional parameter space nearest neighbor sampling of the DESI LS observational galaxies and groups. Finally, the CSST and DESI LS survey geometry and magnitude limit cuts are applied to generate the required MGRSs. As we have checked, this set of MGRSs can generally reproduce the observed galaxy luminosity/mass functions within 0.1 dex for galaxies with $L > 10^8 L_\odot$ (or $M_* > 10^{8.5} M_\odot$) and within 1-$σ$ level for galaxies with $L < 10^8L_\odot$ (or $M_* < 10^{8.5} M_\odot$). Together with the CSST slitless spectra and redshifts for our DESI LS seed galaxies that are under construction, we will set out to test various slitless observational selection effects in subsequent probes. △ Less

Submitted 15 March, 2024; originally announced March 2024.

Comments: 13 pages, 9 figures, accepted for publication in MNRAS

Evolution of cold streams in hot gaseous halos

Authors: WenSheng Hong, Weishan Zhu, TianRui Wang, Xiaohu Yang, LongLong Feng

Abstract: In the prevailing model of galaxy formation and evolution, the process of gas accretion onto central galaxies undergoes a transition from cold-dominated to hot-dominated modes. This shift occurs when the mass of the parent dark matter halos exceeds a critical threshold known as $M_{shock}$. Moreover, cold gas usually flows onto central galaxies through filamentary structures, currently referred to… ▽ More In the prevailing model of galaxy formation and evolution, the process of gas accretion onto central galaxies undergoes a transition from cold-dominated to hot-dominated modes. This shift occurs when the mass of the parent dark matter halos exceeds a critical threshold known as $M_{shock}$. Moreover, cold gas usually flows onto central galaxies through filamentary structures, currently referred to as cold streams. However, the evolution of cold streams in halos with masses around $M_{shock}$, particularly how they are disrupted, remains unclear. To address this issue, we conduct a set of idealised hydrodynamic simulations. Our simulations show that (1) for a gas metallicity $Z=0.001-0.1Z_{\odot}$, cold stream with an inflow rate $\sim 3\, \rm{M_{\odot}}/yr$ per each can persist and effectively transport cold and cool gas to the central region ($< 0.2$ virial radius) in halos with mass $10^{12}\, \rm{M_{\odot}}$, but is disrupted at a radius around $0.2$ virial radius due to compression heating for halos with mass $3 \times 10^{12}\, \rm{M_{\odot}}$. (2) At $z\sim 2$, the maximum halo mass that capable of hosting and sustaining cold streams $M_{stream}$ is between $1\times 10^{12} \rm{M_{\odot}}$ and $1.5\times 10^{12}\rm{M_{\odot}}$ for gas metallicity $Z=0.001Z_{\odot}$, while for a higher gas metallicity $Z=0.1Z_{\odot}$, this value increases to $\sim 1.5\times 10^{12}\rm{M_{\odot}}$. (3) The evolution and ultimate fate of cold streams are determined primarily by the rivalry between radiative cooling and compression. Stronger heating due to compression in halos more massive than $M_{stream}$ can surpass cooling and heat the gas in cold streams to the hot ($\geq 10^6\,$ K) phase. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Comments: 26 pages, 18 figures, accepted for publication in MNRAS

Identifying Black Holes Through Space Telescopes and Deep Learning

Authors: Yeqi Fang, Wei Hong, Jun Tao

Abstract: The EHT has captured a series of images of black holes. These images could provide valuable information about the gravitational environment near the event horizon. However, accurate detection and parameter estimation for candidate black holes are necessary. This paper explores the potential for identifying black holes in the ultraviolet band using space telescopes. We establish a data pipeline for… ▽ More The EHT has captured a series of images of black holes. These images could provide valuable information about the gravitational environment near the event horizon. However, accurate detection and parameter estimation for candidate black holes are necessary. This paper explores the potential for identifying black holes in the ultraviolet band using space telescopes. We establish a data pipeline for generating simulated observations and present an ensemble neural network model for black hole detection and parameter estimation. The model achieves mean average precision [0.5] values of 0.9176 even when reaching the imaging FWHM ($θ_c$) and maintains the detection ability until $0.54θ_c$. The parameter estimation is also accurate. These results indicate that our methodology enables super-resolution recognition. Moreover, the model successfully detects the shadow of M87* from background noise and other celestial bodies and estimates its inclination and positional angle. Our work demonstrates the feasibility of detecting black holes in the ultraviolet band and provides a new method for black hole detection and further parameter estimation. △ Less

Submitted 11 March, 2024; v1 submitted 6 March, 2024; originally announced March 2024.

Comments: 18 pages, 18 figures, 8 tables. We propose a ensemble neural network which demonstrates the feasibility of detecting black holes in the UV band and provides a new method for the accurate and real-time detection of candidate black holes and further parameter estimation

Measuring the conditional luminosity and stellar mass functions of galaxies by combining the DESI LS DR9, SV3 and Y1 data

Authors: Yirong Wang, Xiaohu Yang, Yizhou Gu, Xiaoju Xu, Haojie Xu, Yuyu Wang, Antonios Katsianis, Jiaxin Han, Min He, Yunliang Zheng, Qingyang Li, Yaru Wang, Wensheng Hong, Jiaqi Wang, Zhenlin Tan, Hu Zou, Johannes Ulf Lange, ChangHoon Hahn, Peter Behroozi, Jessica Nicole Aguilar, Steven Ahlen, David Brooks, Todd Claybaugh, Shaun Cole, Axel de la Macorra , et al. (20 additional authors not shown)

Abstract: In this investigation, we leverage the combination of Dark Energy Spectroscopic Instrument Legacy imaging Surveys Data Release 9 (DESI LS DR9), Survey Validation 3 (SV3), and Year 1 (Y1) data sets to estimate the conditional luminosity and stellar mass functions (CLFs & CSMFs) of galaxies across various halo mass bins and redshift ranges. To support our analysis, we utilize a realistic DESI Mock G… ▽ More In this investigation, we leverage the combination of Dark Energy Spectroscopic Instrument Legacy imaging Surveys Data Release 9 (DESI LS DR9), Survey Validation 3 (SV3), and Year 1 (Y1) data sets to estimate the conditional luminosity and stellar mass functions (CLFs & CSMFs) of galaxies across various halo mass bins and redshift ranges. To support our analysis, we utilize a realistic DESI Mock Galaxy Redshift Survey (MGRS) generated from a high-resolution Jiutian simulation. An extended halo-based group finder is applied to both MGRS catalogs and DESI observation. By comparing the r and z-band luminosity functions (LFs) and stellar mass functions (SMFs) derived using both photometric and spectroscopic data, we quantified the impact of photometric redshift (photo-z) errors on the galaxy LFs and SMFs, especially in the low redshift bin at low luminosity/mass end. By conducting prior evaluations of the group finder using MGRS, we successfully obtain a set of CLF and CSMF measurements from observational data. We find that at low redshift the faint end slopes of CLFs and CSMFs below $10^{9}h^{-2}L_{\odot}$ (or $h^{-2}M_{\odot}$) evince a compelling concordance with the subhalo mass functions. After correcting the cosmic variance effect of our local Universe following arXiv:1809.00523, the faint end slopes of the LFs/SMFs turn out to be also in good agreement with the slope of the halo mass function. △ Less

Submitted 22 June, 2024; v1 submitted 28 December, 2023; originally announced December 2023.

Comments: 28 pages, 13 figures, Accepted for publication in ApJ

Evaluating residual acceleration noise for TianQin gravitational waves observatory with an empirical magnetic field model

Authors: Wei Su, Ze-Bing Zhou, Yan Wang, Chen Zhou, P. F. Chen, Wei Hong, J. H. Peng, Yun Yang, Y. W. Ni

Abstract: TianQin (TQ) project plans to deploy three satellites in space around the Earth to measure the displacement change of test masses caused by gravitational waves via laser interferometry. The requirement of the acceleration noise of the test mass is on the order of $10^{-15}~\,{\rm m}\,{\rm s}^{-2}\,{\rm Hz}^{-1/2}$ in the sensitive frequency range of TQ, %the extremely precise acceleration measurem… ▽ More TianQin (TQ) project plans to deploy three satellites in space around the Earth to measure the displacement change of test masses caused by gravitational waves via laser interferometry. The requirement of the acceleration noise of the test mass is on the order of $10^{-15}~\,{\rm m}\,{\rm s}^{-2}\,{\rm Hz}^{-1/2}$ in the sensitive frequency range of TQ, %the extremely precise acceleration measurement requirements make it necessary to investigate acceleration noise due to space magnetic fields. which is so stringent that the acceleration noise caused by the interaction of the space magnetic field with the test mass needs to be investigated. In this work, by using the Tsyganenko model, a data-based empirical space magnetic field model, we obtain the magnetic field distribution around TQ's orbit spanning two solar cycles in 23 years from 1998 to 2020. With the obtained space magnetic field, we derive the distribution and amplitude spectral densities (ASDs) of the acceleration noise of TQ in 23 years. Our results reveal that the average values of the ratio of the acceleration noise cauesd by the space magnetic field to the requirements of TQ at 1 mHz ($R_{\rm 1mHz}$) and 6 mHz ($R_{\rm 6mHz}$) are 0.123$\pm$0.052 and 0.027$\pm$0.013, respectively. The occurence probabilities of $R_{\rm 1mHz}>0.2$ and $>0.3$ are only 7.9% and 1.2%, respectively, and $R_{\rm 6mHz}$ never exceeds 0.2. △ Less

Submitted 30 November, 2023; v1 submitted 15 October, 2023; originally announced October 2023.

Comments: 13 pages, 10 figures, Published in PRD

Novel Cosmological Joint Constraints in Multidimensional Observables Space with Redshift-free Inferences

Authors: Wei Hong, Kang Jiao, Yu-Chen Wang, Tingting Zhang, Tong-Jie Zhang

Abstract: Cosmology constraints serve as a crucial criterion in discriminating cosmological models. The traditional combined method to constrain the cosmological parameters designates the corresponding theoretical value and observational data as functions of redshift, however, sometimes the redshift cannot be measured directly, or the measurement error is large, or the definition of redshift is controversia… ▽ More Cosmology constraints serve as a crucial criterion in discriminating cosmological models. The traditional combined method to constrain the cosmological parameters designates the corresponding theoretical value and observational data as functions of redshift, however, sometimes the redshift cannot be measured directly, or the measurement error is large, or the definition of redshift is controversial. In this paper, we propose a novel joint method to constrain parameters that eliminates the redshift $z$ and makes full use of the multiple observables $\left\lbrace \mathcal{F}_{1,\mathrm{obs}},\mathcal{F}_{2,\mathrm{obs}},\cdots,\mathcal{F}_{M,\mathrm{obs}}\right\rbrace$ spanning in $M$-dimensional joint observables space. Considering the generality of the mathematical form of the cosmological models and the guidance from low to high dimensions, we firstly validate our method in a three-dimensional joint observables space spanned by $H(z)$, $fσ_{8}(z)$ and $D_{A}(z)$, where the three coordinates can be considered redshift-free measurements of the same celestial body (or shared-redshift data reconstructed model independently). Our results are consistent with the traditional combined method but with lower errors, yielding $H_0=68.7\pm0.1\mathrm{~km} \mathrm{~s}^{-1}\mathrm{~Mpc}^{-1}$, $Ω_{m0}=0.289\pm0.003$, $σ_{8}=0.82\pm0.01$ and showing alleviated parametric degeneracies to some extent. In principle, our joint constraint method allows an extended form kee** the redshift information as an independent coordinate and can also be readily degraded to the form of a traditional combined method to constrain parameters. △ Less

Submitted 15 October, 2023; v1 submitted 13 May, 2023; originally announced May 2023.

Comments: 20 pages, 15 figures, 4 tables. Accepted for publication in ApJS. Corresponds to version published in ApJS. We propose a new approach to discriminate among concurring cosmological models by adopting classes of cosmological constraints that can maximize the use of the observable space and can allow to eliminate the redshift from the analysis

Journal ref: The Astrophysical Journal Supplement Series, Volume 268, Issue 2, id.67, 16 pp.(2023)

The TianQin project: current progress on science and technology

Authors: Jianwei Mei, Yan-Zheng Bai, Jiahui Bao, Enrico Barausse, Lin Cai, Enrico Canuto, Bin Cao, Wei-Ming Chen, Yu Chen, Yan-Wei Ding, Hui-Zong Duan, Huimin Fan, Wen-Fan Feng, Honglin Fu, Qing Gao, TianQuan Gao, Yungui Gong, Xingyu Gou, Chao-Zheng Gu, De-Feng Gu, Zi-Qi He, Martin Hendry, Wei Hong, Xin-Chun Hu, Yi-Ming Hu , et al. (82 additional authors not shown)

Abstract: TianQin is a planned space-based gravitational wave (GW) observatory consisting of three earth orbiting satellites with an orbital radius of about $10^5~{\rm km}$. The satellites will form a equilateral triangle constellation the plane of which is nearly perpendicular to the ecliptic plane. TianQin aims to detect GWs between $10^{-4}~{\rm Hz}$ and $1~{\rm Hz}$ that can be generated by a wide varie… ▽ More TianQin is a planned space-based gravitational wave (GW) observatory consisting of three earth orbiting satellites with an orbital radius of about $10^5~{\rm km}$. The satellites will form a equilateral triangle constellation the plane of which is nearly perpendicular to the ecliptic plane. TianQin aims to detect GWs between $10^{-4}~{\rm Hz}$ and $1~{\rm Hz}$ that can be generated by a wide variety of important astrophysical and cosmological sources, including the inspiral of Galactic ultra-compact binaries, the inspiral of stellar-mass black hole binaries, extreme mass ratio inspirals, the merger of massive black hole binaries, and possibly the energetic processes in the very early universe or exotic sources such as cosmic strings. In order to start science operations around 2035, a roadmap called the 0123 plan is being used to bring the key technologies of TianQin to maturity, supported by the construction of a series of research facilities on the ground. Two major projects of the 0123 plan are being carried out. In this process, the team has created a new generation $17~{\rm cm}$ single-body hollow corner-cube retro-reflector which has been launched with the QueQiao satellite on 21 May 2018; a new laser ranging station equipped with a $1.2~{\rm m}$ telescope has been constructed and the station has successfully ranged to all the five retro-reflectors on the Moon; and the TianQin-1 experimental satellite has been launched on 20 December 2019 and the first round result shows that the satellite has exceeded all of its mission requirements. △ Less

Submitted 24 August, 2020; originally announced August 2020.

Comments: 16 pages, 1 figure, invited article to a special section in PTEP

Stellar Mass and stellar Mass-to-light ratio-Color relations for Low Surface Brightness Galaxies

Authors: Du Wei, Cheng Cheng, Zheng Zheng, Wu Hong

Abstract: We estimate the stellar mass for a sample of low surface brightness galaxies (LSBGs) by fitting their multiband spectral energy distributions (SEDs) to the stellar population synthesis (SPS) model. The derived stellar masses (log M*/Msun) span from 7.1 to 11.1, with a mean of log M*/Msun=8.5, which is lower than that for normal galaxies. The stellar mass-to-light ratio (M/L) in each band varies li… ▽ More We estimate the stellar mass for a sample of low surface brightness galaxies (LSBGs) by fitting their multiband spectral energy distributions (SEDs) to the stellar population synthesis (SPS) model. The derived stellar masses (log M*/Msun) span from 7.1 to 11.1, with a mean of log M*/Msun=8.5, which is lower than that for normal galaxies. The stellar mass-to-light ratio (M/L) in each band varies little with absolute magnitude, but increases with higher M*. This trend of M/L with M* is even stronger in bluer bands. In addition, the M/L for our LSBGs slightly declines from the r band to the longer wavelength bands. The log M/L_j (j=g,r,i,and z) have relatively tight relations with optical colors of g-r and g-i. Compared with several representative M/L-color relations (MLCRs) from literature, our MLCRs based on LSBG data are consistently among those literature MLCRs previously defined on diverse galaxy samples, and the existing minor differences between the MLCRs are more caused by the differences in the SED model ingredients including initial mass function, star formation history, and stellar population model, and the line fitting techniques, galaxy samples, and photometric zero-point as well, rather than the galaxy surface brightness itself which distinguishes LSBGs from HSBGs. Our LSBGs would be very likely to follow those representative MLCRs previously defined on diverse galaxy populations, if those main ingredients were taken into account. △ Less

Submitted 3 March, 2020; originally announced March 2020.

Comments: Published in Astronomical Journal on March 3, 2020, see https://doi.org/10.3847/1538-3881/ab6efb

Spectral classification and composites of galaxies in LAMOST DR4

Authors: Li-Li Wang, A-Li Luo, Shi-Yin Shen, Wen Hou, Xiao Kong, Yi-Han Song, Jian-Nan Zhang, Wu Hong, Zi-Huang Cao, Yong-Hui Hou, Yue-Fei Wang, Yong Zhang, Yong-Heng Zhao

Abstract: We study the classification and composite spectra of galaxy in the fourth data release (DR4) of the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST). We select 40,182 spectra of galaxies from LAMOST DR4, which have photometric in- formation but no spectroscopic observations in the Sloan Digital Sky Survey(SDSS). These newly observed spectra are re-calibrated and classified into s… ▽ More We study the classification and composite spectra of galaxy in the fourth data release (DR4) of the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST). We select 40,182 spectra of galaxies from LAMOST DR4, which have photometric in- formation but no spectroscopic observations in the Sloan Digital Sky Survey(SDSS). These newly observed spectra are re-calibrated and classified into six classes, i.e. pas- sive, Hα-weak, star-forming, composite, LINER and Seyfert using the line intensity (H\b{eta}, [OIII]λ5007, Hα and [NII]λ6585). We also study the correlation between spectral classes and morphological types through three parameters: concentration index, (u - r) color, and D4000n index. We calculate composite spectra of high signal-to-noise ra- tio(S/N) for six spectral classes, and using these composites we pick out some features that can differentiate the classes effectively, including H\b{eta}, Fe5015, HγA, HK, and Mg2 band etc. In addition, we compare our composite spectra with the SDSS ones and analyse their difference. A galaxy catalogue of 40,182 newly observed spectra (36,601 targets) and the composite spectra of the six classes are available online. △ Less

Submitted 29 October, 2017; originally announced October 2017.

Comments: 14 pages, 11 figures

Proton-proton fusion in pionless effective theory

Authors: S. Ando, J. W. Shin, C. H. Hyun, S. W. Hong, K. Kubodera

Abstract: The proton-proton fusion reaction, $pp\to de^+ν$, is studied in pionless effective field theory (EFT) with di-baryon fields up to next-to leading order. With the aid of the di-baryon fields, the effective range corrections are naturally resummed up to the infinite order and thus the calculation is greatly simplified. Furthermore, the low-energy constant which appears in the axial-current-di-bary… ▽ More The proton-proton fusion reaction, $pp\to de^+ν$, is studied in pionless effective field theory (EFT) with di-baryon fields up to next-to leading order. With the aid of the di-baryon fields, the effective range corrections are naturally resummed up to the infinite order and thus the calculation is greatly simplified. Furthermore, the low-energy constant which appears in the axial-current-di-baryon-di-baryon contact vertex is fixed through the ratio of two- and one-body matrix elements which reproduces the tritium lifetime very precisely. As a result we can perform a parameter free calculation for the process. We compare our numerical result with those from the accurate potential model and previous pionless EFT calculations, and find a good agreement within the accuracy better than 1%. △ Less

Submitted 28 January, 2008; originally announced January 2008.

Comments: 14 pages, 5 eps figures

Journal ref: Phys.Lett.B668:187-192,2008

Radiative neutron capture on a proton at BBN energies

Authors: S. Ando, R. H. Cyburt, S. W. Hong, C. H. Hyun

Abstract: The total cross section for radiative neutron capture on a proton, $np \to d γ$, is evaluated at big bang nucleosynthesis (BBN) energies. The electromagnetic transition amplitudes are calculated up to next-to leading order within the framework of pionless effective field theory with dibaryon fields. We also calculate the $dγ\to np$ cross section and the photon analyzing power for the… ▽ More The total cross section for radiative neutron capture on a proton, $np \to d γ$, is evaluated at big bang nucleosynthesis (BBN) energies. The electromagnetic transition amplitudes are calculated up to next-to leading order within the framework of pionless effective field theory with dibaryon fields. We also calculate the $dγ\to np$ cross section and the photon analyzing power for the $d\vecγ\to np$ process from the amplitudes. The values of low energy constants that appear in the amplitudes are estimated by a Markov Chain Monte Carlo analysis using the relevant low energy experimental data. Our result agrees well with those of other theoretical calculations except for the $np\to dγ$ cross section at some energies estimated by an R-matrix analysis. We also study the uncertainties in our estimation of the $np\to dγ$ cross section at relevant BBN energies and find that the estimated cross section is reliable to within $\sim$1% error. △ Less

Submitted 7 July, 2006; v1 submitted 28 November, 2005; originally announced November 2005.

Comments: 21 pages and 12 eps figures; 6 eps figures and 2 references added, and accepted for publication in Phys. Rev. C

Report number: TRI-PP-05-29

Journal ref: Phys.Rev. C74 (2006) 025809