-
Electrostatic Dust Ejection From Asteroid (3200) Phaethon With the Aid of Mobile Alkali Ions at Perihelion
Authors:
Hiroshi Kimura,
Katsuhito Ohtsuka,
Shota Kikuchi,
Keiji Ohtsuki,
Tomoko Arai,
Fumi Yoshida,
Naoyuki Hirata,
Hiroki Senshu,
Koji Wada,
Takayuki Hirai,
Peng K. Hong,
Masanori Kobayashi,
Ko Ishibashi,
Manabu Yamada,
Takaya Okamoto
Abstract:
The asteroid (3200) Phaethon is known to be the parent body of the Geminids, although meteor showers are commonly associated with the activity of periodic comets. What is most peculiar to the asteroid is its comet-like activity in the ejection of micrometer-sized dust particles at every perihelion passage, while the activity of the asteroid has never been identified outside the near-perihelion zon…
▽ More
The asteroid (3200) Phaethon is known to be the parent body of the Geminids, although meteor showers are commonly associated with the activity of periodic comets. What is most peculiar to the asteroid is its comet-like activity in the ejection of micrometer-sized dust particles at every perihelion passage, while the activity of the asteroid has never been identified outside the near-perihelion zone at $0.14~\mathrm{au}$ from the Sun. From the theoretical point of view, we argue that the activity of the asteroid is well explained by the electrostatic lofting of micrometer-sized dust particles with the aid of mobile alkali ions at high temperatures. The mass-loss rates of micrometer-sized particles from the asteroid in our model is entirely consistent with the values inferred from visible observations of Phaethon's dust tail. For millimeter-sized particles, we predict three orders of magnitudes higher mass-loss rates, which could also account for the total mass of the Geminid meteoroid stream by the electrostatic lofting mechanism.
△ Less
Submitted 20 April, 2022;
originally announced April 2022.
-
Hayabusa2 Extended Mission: New Voyage to Rendezvous with a Small Asteroid Rotating with a Short Period
Authors:
M. Hirabayashi,
Y. Mimasu,
N. Sakatani,
S. Watanabe,
Y. Tsuda,
T. Saiki,
S. Kikuchi,
T. Kouyama,
M. Yoshikawa,
S. Tanaka,
S. Nakazawa,
Y. Takei,
F. Terui,
H. Takeuchi,
A. Fujii,
T. Iwata,
K. Tsumura,
S. Matsuura,
Y. Shimaki,
S. Urakawa,
Y. Ishibashi,
S. Hasegawa,
M. Ishiguro,
D. Kuroda,
S. Okumura
, et al. (19 additional authors not shown)
Abstract:
Hayabusa2 is the Japanese Asteroid Return Mission and targeted the carbonaceous asteroid Ryugu, conducted by the Japan Aerospace Exploration Agency (JAXA). The goal of this mission was to conduct proximity operations including remote sensing observations, material sampling, and a Small Carry-On Impact experiment, as well as sample analyses. As of September 2020, the spacecraft is on the way back t…
▽ More
Hayabusa2 is the Japanese Asteroid Return Mission and targeted the carbonaceous asteroid Ryugu, conducted by the Japan Aerospace Exploration Agency (JAXA). The goal of this mission was to conduct proximity operations including remote sensing observations, material sampling, and a Small Carry-On Impact experiment, as well as sample analyses. As of September 2020, the spacecraft is on the way back to Earth with samples from Ryugu with no critical issues after the successful departure in November 2019. Here, we propose an extended mission in which the spacecraft will rendezvous with a small asteroid with ~30 m - ~40 m in diameter that is rotating at a spin period of ~10 min after an additional ~10-year cruise phase. We introduce that two scenarios are suitable for the extended mission. In the first scenario, the spacecraft will perform swing-by maneuvers at Venus once and Earth twice to arrive at asteroid 2001 AV43. In the second scenario, it will perform swing-by maneuvers at Earth twice to reach asteroid 1998 KY26. In both scenarios, the mission will continue until the early 2030s. JAXA recently released the decision that the spacecraft will rendezvous with 1998 KY26. This paper focuses on our scientific assessments of the two scenarios but leaves the decision process to go to 1998 KY26 for future reports. Rendezvous operations will be planned to detail the physical properties and surrounding environments of the target, one of the smallest elements of small planetary bodies. By achieving the planned operations, the mission will provide critical hints on the violent histories of collisions and accumulations of small bodies in the solar system. Furthermore, the established scientific knowledge and techniques will advance key technologies for planetary defense.
△ Less
Submitted 17 April, 2021;
originally announced April 2021.
-
Is water ice an efficient facilitator for dust coagulation?
Authors:
Hiroshi Kimura,
Koji Wada,
Hiroshi Kobayashi,
Hiroki Senshu,
Takayuki Hirai,
Fumi Yoshida,
Masanori Kobayashi,
Peng K. Hong,
Tomoko Arai,
Ko Ishibashi,
Manabu Yamada
Abstract:
Beyond the snow line of protoplanetary discs and inside the dense core of molecular clouds, the temperature of gas is low enough for water vapour to condense into amorphous ices on the surface of preexisting refractory dust particles. Recent numerical simulations and laboratory experiments suggest that condensation of the vapour promotes dust coagulation in such a cold region. However, in the nume…
▽ More
Beyond the snow line of protoplanetary discs and inside the dense core of molecular clouds, the temperature of gas is low enough for water vapour to condense into amorphous ices on the surface of preexisting refractory dust particles. Recent numerical simulations and laboratory experiments suggest that condensation of the vapour promotes dust coagulation in such a cold region. However, in the numerical simulations, cohesion of refractory materials is often underestimated, while in the laboratory experiments, water vapour collides with surfaces at more frequent intervals compared to the real conditions. Therefore, to re-examine the role of water ice in dust coagulation, we carry out systematic investigation of available data on coagulation of water ice particles by making full use of appropriate theories in contact mechanics and tribology. We find that the majority of experimental data are reasonably well explained by lubrication theories, owing to the presence of a quasi-liquid layer (QLL). Only exceptions are the results of dynamic collisions between particles at low temperatures, which are, instead, consistent with the JKR theory, because QLLs are too thin to dissipate their kinetic energies. By considering the vacuum conditions in protoplanetary discs and molecular clouds, the formation of amorphous water ice on the surface of refractory particles does not necessarily aid their collisional growth as currently expected. While crystallisation of water ice around but outside the snow line eases coagulation of ice-coated particles, sublimation of water ice inside the snow line is deemed to facilitate coagulation of bare refractory particles.
△ Less
Submitted 14 October, 2020; v1 submitted 13 August, 2020;
originally announced August 2020.
-
The tensile strength of dust aggregates consisting of small elastic grains: Constraints on the size of condensates in protoplanetary disks
Authors:
Hiroshi Kimura,
Koji Wada,
Fumi Yoshida,
Peng K. Hong,
Hiroki Senshu,
Tomoko Arai,
Takayuki Hirai,
Masanori Kobayashi,
Ko Ishibashi,
Manabu Yamada
Abstract:
A consensus view on the formation of planetesimals is now exposed to a threat, since recent numerical studies on the mechanical properties of dust aggregates tend to dispute the conceptual picture that submicrometer-sized grains conglomerate into planetesimals in protoplanetary disks. With the advent of precise laboratory experiments and extensive computer simulations on the interaction between el…
▽ More
A consensus view on the formation of planetesimals is now exposed to a threat, since recent numerical studies on the mechanical properties of dust aggregates tend to dispute the conceptual picture that submicrometer-sized grains conglomerate into planetesimals in protoplanetary disks. With the advent of precise laboratory experiments and extensive computer simulations on the interaction between elastic spheres comprising dust aggregates, we revisit a model for the tensile strength of dust aggregates consisting of small elastic grains. In the framework of contact mechanics and fracture mechanics, we examine outcomes of computer simulations and laboratory experiments on the tensile strength of dust aggregates. We provide a novel analytical formula that explicitly incorporates the volume effect on the tensile strength, namely, the dependence of tensile strength on the volume of dust aggregates. We find that our model for the tensile strength of dust aggregates well reproduces results of computer simulations and laboratory experiments, if appropriate values are adopted for the elastic parameters used in the model. Moreover, the model with dust aggregates of submicrometer-sized grains is in good harmony with the tensile strength of cometary dust and meteoroids derived from astronomical observations. Therefore, we reaffirm the commonly believed idea that the formation of planetesimals begins with conglomeration of submicrometer-sized grains condensed in protoplanetary disks.
△ Less
Submitted 7 July, 2020; v1 submitted 9 June, 2020;
originally announced June 2020.
-
Modelling DESTINY+ interplanetary and interstellar dust measurements en route to the active asteroid (3200) Phaethon
Authors:
Harald Krüger,
Peter Strub,
Ralf Srama,
Masanori Kobayashi,
Tomoko Arai,
Hiroshi Kimura,
Takayuki Hirai,
Georg Moragas-Klostermeyer,
Nicolas Altobelli,
Veerle J. Sterken,
Jessica Agarwal,
Maximilian Sommer,
Eberhard Grün
Abstract:
The JAXA/ISAS spacecraft DESTINY$^+$ will be launched to the active asteroid (3200) Phaethon in 2022. Among the proposed core payload is the DESTINY+ Dust Analyzer (DDA) which is an upgrade of the Cosmic Dust Analyzer flown on the Cassini spacecraft to Saturn (Srama et al. 2011). We use two up-to-date computer models, the ESA Interplanetary Meteoroid Engineering Model (IMEM, Dikarev et al. 2005),…
▽ More
The JAXA/ISAS spacecraft DESTINY$^+$ will be launched to the active asteroid (3200) Phaethon in 2022. Among the proposed core payload is the DESTINY+ Dust Analyzer (DDA) which is an upgrade of the Cosmic Dust Analyzer flown on the Cassini spacecraft to Saturn (Srama et al. 2011). We use two up-to-date computer models, the ESA Interplanetary Meteoroid Engineering Model (IMEM, Dikarev et al. 2005), and the interstellar dust module of the Interplanetary Meteoroid environment for EXploration model (IMEX; Sterken2013 et al., Strub et al. 2019) to study the detection conditions and fluences of interplanetary and interstellar dust with DDA. Our results show that a statistically significant number of interplanetary and interstellar dust particles will be detectable with DDA during the 4-years interplanetary cruise of DESTINY+. The particle impact direction and speed can be used to descriminate between interstellar and interplanetary particles and likely also to distinguish between cometary and asteroidal particles.
△ Less
Submitted 15 April, 2019;
originally announced April 2019.
-
Increase in cratering efficiency with target curvature in strength-controlled craters
Authors:
Ayako I. Suzuki,
Chisato Okamoto,
Kosuke Kurosawa,
Toshihiko Kadono,
Sunao Hasegawa,
Takayuki Hirai
Abstract:
Impact-cratering processes on small bodies are thought to be mainly controlled by the local material strength because of their low surface gravity, and craters that are as large as the parent bodies should be affected by the target curvature. Although cratering processes on planar surfaces in the strength-controlled regime have been studied extensively, the mechanism by which target curvature affe…
▽ More
Impact-cratering processes on small bodies are thought to be mainly controlled by the local material strength because of their low surface gravity, and craters that are as large as the parent bodies should be affected by the target curvature. Although cratering processes on planar surfaces in the strength-controlled regime have been studied extensively, the mechanism by which target curvature affects the cratering processes remains unclear. Herein, we report on a series of impact experiments that used spherical targets with various diameters. The resultant craters consisted of a deep circular pit and an irregular-shaped spall region around the pit, which is consistent with the features reported in a number of previous cratering experiments on planar surfaces. However, the volume and radius of the craters increased with the normalized curvature. The results indicate that the increase in the spall-region volume and radius mainly contributes to the increase in the whole crater volume and radius, although the volume, depth, and radius of pits remain constant with curvature. The results of our model indicate that the geometric effect due to curvature (i.e., whereby the distance from the equivalent center to the target free surface is shorter for higher curvature values) contributes to increases in the cratering efficiency. Our results suggest that the impactors that produce the largest craters (basins) on some asteroids are thus smaller than what is estimated by current scaling laws, which do not take into account the curvature effects.
△ Less
Submitted 20 October, 2017;
originally announced October 2017.
-
Two-layer anti-reflection coating with mullite and polyimide foam for large-diameter cryogenic infrared filters
Authors:
Yuki Inoue,
Takaho Hamada,
Masaya Hasegawa,
Masashi Hazumi,
Yasuto Hori,
Aritoki Suzuki,
Takayuki Tomaru,
Tomotake Matsumura,
Toshifumi Sakata,
Tomoyuki Minamoto,
Tohru Hirai
Abstract:
We have developed a novel two-layer anti-reflection (AR) coating method for large-diameter infrared (IR) filters made of alumina, for the use at cryogenic temperatures in millimeter wave measurements. Thermally- sprayed mullite and polyimide foam (Skybond Foam) are used as the AR material. An advantage of the Skybond Foam is that the index of refraction is chosen between 1.1 and 1.7 by changing th…
▽ More
We have developed a novel two-layer anti-reflection (AR) coating method for large-diameter infrared (IR) filters made of alumina, for the use at cryogenic temperatures in millimeter wave measurements. Thermally- sprayed mullite and polyimide foam (Skybond Foam) are used as the AR material. An advantage of the Skybond Foam is that the index of refraction is chosen between 1.1 and 1.7 by changing the filling factor. Combination with mullite is suitable for wide-band millimeter wave measurements with sufficient IR cutoff capability. We present the material properties, fabrication of a large-diameter IR filter made of alumina with this AR coating method, and characterizations at cryogenic temperatures. This technology can be applied to a low-temperature receiver system with a large-diameter focal plane for next-generation cosmic microwave background (CMB) polarization measurements, such as POLARBEAR-2 (PB-2).
△ Less
Submitted 2 November, 2016; v1 submitted 11 July, 2016;
originally announced July 2016.
-
Dynamics of Quiet Universes
Authors:
Hiraku Mutoh,
Toshinari Hirai,
Kei-ichi Maeda
Abstract:
We study the stability of a contracting {\it silent universe}, which is a spacetime with irrotational dust and vanishing magnetic part of the Weyl tensor, $H_{ab}=0$. Two general relativistic backgrounds are analyzed; one is an attractor of {\it silent universes}, i.e., a locally Kasner spacetime, and the other is a particular class of inhomogeneous Szekeres solutions. In both cases their stabil…
▽ More
We study the stability of a contracting {\it silent universe}, which is a spacetime with irrotational dust and vanishing magnetic part of the Weyl tensor, $H_{ab}=0$. Two general relativistic backgrounds are analyzed; one is an attractor of {\it silent universes}, i.e., a locally Kasner spacetime, and the other is a particular class of inhomogeneous Szekeres solutions. In both cases their stabilities against perturbations with non-zero magnetic part depend on a contraction configuration; a spindle-like collapse is unstable, while a pancake-like collapse is still stable. We also find that a similar instability exists in spindle collapse for a Newtonian case.
We conclude that $H_{ab}=0$ is not a generic ansatz even in general relativistic dust collapse.
△ Less
Submitted 28 August, 1996;
originally announced August 1996.
-
Gauge-Invariant Cosmological Perturbations in Generalized Einstein Theories
Authors:
Toshinari Hirai,
Kei-ichi Maeda
Abstract:
Using the covariant approach and conformal transformations, we present a gauge-invariant formalism for cosmological perturbations in generalized Einstein theories (GETs), including the Brans-Dicke theory, theories with a non-minimally coupled scalar field and certain curvature-squared theories. We find an enhancement in the growth rate of density perturbations in the Brans-Dicke theory, and disc…
▽ More
Using the covariant approach and conformal transformations, we present a gauge-invariant formalism for cosmological perturbations in generalized Einstein theories (GETs), including the Brans-Dicke theory, theories with a non-minimally coupled scalar field and certain curvature-squared theories. We find an enhancement in the growth rate of density perturbations in the Brans-Dicke theory, and discuss attractive features of GETs in the structure formation process.
△ Less
Submitted 12 April, 1994;
originally announced April 1994.
