-
BYORP and Dissipation in Binary Asteroids: Lessons from DART
Authors:
Matija Ćuk,
Harrison Agrusa,
Rachel H. Cueva,
Fabio Ferrari,
Masatoshi Hirabayashi,
Seth A. Jacobson,
Jay McMahon,
Patrick Michel,
Paul Sánchez,
Daniel J. Scheeres,
Stephen Schwartz,
Kevin J. Walsh,
Yun Zhang
Abstract:
The Near-Earth binary asteroid Didymos was the target of a planetary defense demonstration mission DART in September 2022. The smaller binary component, Dimorphos, was impacted by the spacecraft in order to measure momentum transfer in kinetic impacts into rubble piles. DART and associated Earth-based observation campaigns have provided a wealth of scientific data on the Didymos-Dimorphos binary.…
▽ More
The Near-Earth binary asteroid Didymos was the target of a planetary defense demonstration mission DART in September 2022. The smaller binary component, Dimorphos, was impacted by the spacecraft in order to measure momentum transfer in kinetic impacts into rubble piles. DART and associated Earth-based observation campaigns have provided a wealth of scientific data on the Didymos-Dimorphos binary. DART revealed a largely oblate and ellipsoidal shape of Dimorphos before the impact, while the post-impact observations suggest that Dimorphos now has a prolate shape. Here we add those data points to the known properties of small binary asteroids and propose new paradigms of the radiative binary YORP (BYORP) effect as well as tidal dissipation in small binaries. We find that relatively spheroidal bodies like Dimorphos made of small debris may experience a weaker and more size-dependent BYORP effect than previously thought. This could explain the observed values of period drift in several well-characterized binaries. We also propose that energy dissipation in small binaries is dominated by relatively brief episodes of large-scale movement of (likely surface) materials, rather than long-term steady-state tidal dissipation. We propose that one such episode was triggered on Dimorphos by the DART impact. Depending on the longevity of this high-dissipation regime, it is possible that Dimorphos will be more dynamically relaxed in time for the Hera mission than it was in the weeks following the impact.
△ Less
Submitted 28 June, 2024;
originally announced June 2024.
-
Macro-scale roughness reveals the complex history of asteroids Didymos and Dimorphos
Authors:
Jean-Baptiste Vincent,
Erik Asphaug,
Olivier Barnouin,
Joel Beccarelli,
Paula G. Benavidez,
Adriano Campo-Bagatin,
Nancy L. Chabot,
Carolyn M. Ernst,
Pedro H. Hasselmann,
Masatoshi Hirabayashi,
Simone Ieva,
Ozgur Karatekin,
Tomas Kasparek,
Tomas Kohout,
Zhong-Yi Lin,
Alice Lucchetti,
Patrick Michel,
Naomi Murdoch,
Maurizio Pajola,
Laura M. Parro,
Sabina D. Raducan,
Jessica Sunshine,
Gonzalo Tancredi,
Josep M. Trigo-Rodriguez,
Angelo Zinzi
Abstract:
Morphological map** is a fundamental step in studying the processes that shaped an asteroid surface. Yet, it is challenging and often requires multiple independent assessments by trained experts. Here, we present fast methods to detect and characterize meaningful terrains from the topographic roughness: entropy of information, and local mean surface orientation. We apply our techniques to Didymo…
▽ More
Morphological map** is a fundamental step in studying the processes that shaped an asteroid surface. Yet, it is challenging and often requires multiple independent assessments by trained experts. Here, we present fast methods to detect and characterize meaningful terrains from the topographic roughness: entropy of information, and local mean surface orientation. We apply our techniques to Didymos and Dimorphos, the target asteroids of NASA's DART mission: first attempt to deflect an asteroid. Our methods reliably identify morphological units at multiple scales. The comparative study reveals various terrain types, signatures of processes that transformed Didymos and Dimorphos. Didymos shows the most heterogeneity and morphology that indicate recent resurfacing events. Dimorphos is comparatively rougher than Didymos, which may result from the formation process of the binary pair and past interaction between the two bodies. Our methods can be readily applied to other bodies and data sets.
△ Less
Submitted 30 May, 2024;
originally announced May 2024.
-
Lessons learned from NASA's DART impact about disrupting rubble-pile asteroids
Authors:
S. D. Raducan,
M. Jutzi,
C. C. Merrill,
P. Michel,
Y. Zhang,
M. Hirabayashi,
A. Mainzer
Abstract:
We present a series of numerical simulations using a shock physics smoothed particle hydrodynamics (SPH) code, investigating energetic impacts on small celestial bodies characterised by diverse internal structures, ranging from weak and homogeneous compositions to rubble-pile structures with varying boulder volume packing. Our findings reveal that the internal structure of these rubble-pile bodies…
▽ More
We present a series of numerical simulations using a shock physics smoothed particle hydrodynamics (SPH) code, investigating energetic impacts on small celestial bodies characterised by diverse internal structures, ranging from weak and homogeneous compositions to rubble-pile structures with varying boulder volume packing. Our findings reveal that the internal structure of these rubble-pile bodies significantly influences the impact outcomes. Specifically, we observe that the same impact energy can either catastrophically disrupt a target with a low boulder packing (<30 vol%), or result in the ejection of only a small fraction of material from a target with the same mass but high boulder packing (>40 vol%). This finding highlights the pivotal role played by the rubble-pile structure, effectively acting as a bulk shear strength, which governs the size and behaviour of the resulting impact. Consequently, understanding and characterising the internal structure of asteroids will be of paramount importance for any future efforts to deflect or disrupt an asteroid on a collision course with Earth.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
Physical properties of asteroid Dimorphos as derived from the DART impact
Authors:
S. D. Raducan,
M. Jutzi,
A. F. Cheng,
Y. Zhang,
O. Barnouin,
G. S. Collins,
R. T. Daly,
T. M. Davison,
C. M. Ernst,
T. L. Farnham,
F. Ferrari,
M. Hirabayashi,
K. M. Kumamoto,
P. Michel,
N. Murdoch,
R. Nakano,
M. Pajola,
A. Rossi,
H. F. Agrusa,
B. W. Barbee,
M. Bruck Syal,
N. L. Chabot,
E. Dotto,
E. G. Fahnestock,
P. H. Hasselmann
, et al. (17 additional authors not shown)
Abstract:
On September 26, 2022, NASA's Double Asteroid Redirection Test (DART) mission successfully impacted Dimorphos, the natural satellite of the binary near-Earth asteroid (65803) Didymos. Numerical simulations of the impact provide a means to explore target surface material properties and structures, consistent with the observed momentum deflection efficiency, ejecta cone geometry, and ejected mass. O…
▽ More
On September 26, 2022, NASA's Double Asteroid Redirection Test (DART) mission successfully impacted Dimorphos, the natural satellite of the binary near-Earth asteroid (65803) Didymos. Numerical simulations of the impact provide a means to explore target surface material properties and structures, consistent with the observed momentum deflection efficiency, ejecta cone geometry, and ejected mass. Our simulation, which best matches observations, indicates that Dimorphos is weak, with a cohesive strength of less than a few pascals (Pa), similar to asteroids (162173) Ryugu and (101955) Bennu. We find that a bulk density of Dimorphos, rhoB, lower than 2400 kg/m3, and a low volume fraction of boulders (<40 vol%) on the surface and in the shallow subsurface, are consistent with measured data from the DART experiment. These findings suggest Dimorphos is a rubble pile that might have formed through rotational mass shedding and re-accumulation from Didymos. Our simulations indicate that the DART impact caused global deformation and resurfacing of Dimorphos. ESA's upcoming Hera mission may find a re-shaped asteroid, rather than a well-defined crater.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
Ejecta Evolution Following a Planned Impact into an Asteroid: The First Five Weeks
Authors:
Theodore Kareta,
Cristina Thomas,
Jian-Yang Li,
Matthew M. Knight,
Nicholas Moskovitz,
Agata Rozek,
Michele T. Bannister,
Simone Ieva,
Colin Snodgrass,
Petr Pravec,
Eileen V. Ryan,
William H. Ryan,
Eugene G. Fahnestock,
Andrew S. Rivkin,
Nancy Chabot,
Alan Fitzsimmons,
David Osip,
Tim Lister,
Gal Sarid,
Masatoshi Hirabayashi,
Tony Farnham,
Gonzalo Tancredi,
Patrick Michel,
Richard Wainscoat,
Rob Weryk
, et al. (63 additional authors not shown)
Abstract:
The impact of the DART spacecraft into Dimorphos, moon of the asteroid Didymos, changed Dimorphos' orbit substantially, largely from the ejection of material. We present results from twelve Earth-based facilities involved in a world-wide campaign to monitor the brightness and morphology of the ejecta in the first 35 days after impact. After an initial brightening of ~1.4 magnitudes, we find consis…
▽ More
The impact of the DART spacecraft into Dimorphos, moon of the asteroid Didymos, changed Dimorphos' orbit substantially, largely from the ejection of material. We present results from twelve Earth-based facilities involved in a world-wide campaign to monitor the brightness and morphology of the ejecta in the first 35 days after impact. After an initial brightening of ~1.4 magnitudes, we find consistent dimming rates of 0.11-0.12 magnitudes/day in the first week, and 0.08-0.09 magnitudes/day over the entire study period. The system returned to its pre-impact brightness 24.3-25.3 days after impact through the primary ejecta tail remained. The dimming paused briefly eight days after impact, near in time to the appearance of the second tail. This was likely due to a secondary release of material after re-impact of a boulder released in the initial impact, through movement of the primary ejecta through the aperture likely played a role.
△ Less
Submitted 18 October, 2023;
originally announced October 2023.
-
The Perturbed Full Two-Body Problem: Application to Post-DART Didymos
Authors:
Alex J. Meyer,
Harrison F. Agrusa,
Derek C. Richardson,
R. Terik Daly,
Oscar Fuentes-Muñoz,
Masatoshi Hirabayashi,
Patrick Michel,
Colby C. Merrill,
Ryota Nakano,
Andrew F. Cheng,
Brent Barbee,
Olivier S. Barnouin,
Steven R. Chesley,
Carolyn M. Ernst,
Ioannis Gkolias,
Nicholas A. Moskovitz,
Shantanu P. Naidu,
Petr Pravec,
Petr Scheirich,
Cristina A. Thomas,
Kleomenis Tsiganis,
Daniel J. Scheeres
Abstract:
With the successful impact of the NASA DART spacecraft in the Didymos-Dimorphos binary asteroid system, we provide an initial analysis of the post-impact perturbed binary asteroid dynamics. To compare our simulation results with observations, we introduce a set of "observable elements" calculated using only the physical separation of the binary asteroid, rather than traditional Keplerian elements.…
▽ More
With the successful impact of the NASA DART spacecraft in the Didymos-Dimorphos binary asteroid system, we provide an initial analysis of the post-impact perturbed binary asteroid dynamics. To compare our simulation results with observations, we introduce a set of "observable elements" calculated using only the physical separation of the binary asteroid, rather than traditional Keplerian elements. Using numerical methods that treat the fully spin-orbit-coupled dynamics, we estimate the system's mass and the impact-induced changes in orbital velocity, semimajor axis, and eccentricity. We find that the changes to the mutual orbit depend strongly on the separation distance between Didymos and Dimorphos at the time of impact. If Dimorphos enters a tumbling state after the impact, this may be observable through changes in the system's eccentricity and orbit period. We also find that any DART-induced resha** of Dimorphos would generally reduce the required change in orbital velocity to achieve the measured post-impact orbit period and will be assessed by the ESA Hera mission in 2027.
△ Less
Submitted 31 July, 2023;
originally announced July 2023.
-
Characterization of the ejecta from NASA/DART impact on Dimorphos: observations and Monte Carlo models
Authors:
Fernando Moreno,
Adriano Campo Bagatin,
Gonzalo Tancredi,
Jian-Yang Li,
Alessandro Rossi,
Fabio Ferrari,
Masatoshi Hirabayashi,
Eugene Fahnestock,
Alain Maury,
Robert Sandness,
Andrew S. Rivkin,
Andy Cheng,
Tony L. Farnham,
Stefania Soldini,
Carmine Giordano,
Gianmario Merisio,
Paolo Panicucci,
Mattia Pugliatti,
Alberto J. Castro-Tirado,
Emilio Fernandez-Garcia,
Ignacio Perez-Garcia,
Stavro Ivanovski,
Antti Penttila,
Ludmilla Kolokolova,
Javier Licandro
, et al. (4 additional authors not shown)
Abstract:
The NASA/DART (Double Asteroid Redirection Test) spacecraft successfully crashed on Dimorphos, the secondary component of the binary (65803) Didymos system. Following the impact, a large dust cloud was released, and a long-lasting dust tail was developed. We have extensively monitored the dust tail from the ground and from the Hubble Space Telescope (HST). We provide a characterization of the ejec…
▽ More
The NASA/DART (Double Asteroid Redirection Test) spacecraft successfully crashed on Dimorphos, the secondary component of the binary (65803) Didymos system. Following the impact, a large dust cloud was released, and a long-lasting dust tail was developed. We have extensively monitored the dust tail from the ground and from the Hubble Space Telescope (HST). We provide a characterization of the ejecta dust properties, i.e., particle size distribution and ejection speeds, ejection geometric parameters, and mass, by combining both observational data sets, and by using Monte Carlo models of the observed dust tail. The differential size distribution function that best fits the imaging data was a broken power-law, having a power index of --2.5 for particles of r$\le$ 3 mm, and of --3.7 for larger particles. The particles range in sizes from 1 $μ$m up to 5 cm. The ejecta is characterized by two components, depending on velocity and ejection direction. The northern component of the double tail, observed since October 8th 2022, might be associated to a secondary ejection event from impacting debris on Didymos, although it is also possible that this feature results from the binary system dynamics alone. The lower limit to the total dust mass ejected is estimated at $\sim$6$\times$10$^6$ kg, half of this mass being ejected to interplanetary space.
△ Less
Submitted 19 July, 2023;
originally announced July 2023.
-
JASMINE: Near-Infrared Astrometry and Time Series Photometry Science
Authors:
Daisuke Kawata,
Hajime Kawahara,
Naoteru Gouda,
Nathan J. Secrest,
Ryouhei Kano,
Hirokazu Kataza,
Naoki Isobe,
Ryou Ohsawa,
Fumihiko Usui,
Yoshiyuki Yamada,
Alister W. Graham,
Alex R. Pettitt,
Hideki Asada,
Junichi Baba,
Kenji Bekki,
Bryan N. Dorland,
Michiko Fujii,
Akihiko Fukui,
Kohei Hattori,
Teruyuki Hirano,
Takafumi Kamizuka,
Shingo Kashima,
Norita Kawanaka,
Yui Kawashima,
Sergei A. Klioner
, et al. (64 additional authors not shown)
Abstract:
Japan Astrometry Satellite Mission for INfrared Exploration (JASMINE) is a planned M-class science space mission by the Institute of Space and Astronautical Science, the Japan Aerospace Exploration Agency. JASMINE has two main science goals. One is the Galactic archaeology with Galactic Center Survey, which aims to reveal the Milky Way's central core structure and formation history from Gaia-level…
▽ More
Japan Astrometry Satellite Mission for INfrared Exploration (JASMINE) is a planned M-class science space mission by the Institute of Space and Astronautical Science, the Japan Aerospace Exploration Agency. JASMINE has two main science goals. One is the Galactic archaeology with Galactic Center Survey, which aims to reveal the Milky Way's central core structure and formation history from Gaia-level (~25 $μ$as) astrometry in the Near-Infrared (NIR) Hw-band (1.0-1.6 $μ$m). The other is the Exoplanet Survey, which aims to discover transiting Earth-like exoplanets in the habitable zone from NIR time-series photometry of M dwarfs when the Galactic center is not accessible. We introduce the mission, review many science objectives, and present the instrument concept. JASMINE will be the first dedicated NIR astrometry space mission and provide precise astrometric information of the stars in the Galactic center, taking advantage of the significantly lower extinction in the NIR. The precise astrometry is obtained by taking many short-exposure images. Hence, the JASMINE Galactic center survey data will be valuable for studies of exoplanet transits, asteroseismology, variable stars and microlensing studies, including discovery of (intermediate mass) black holes. We highlight a swath of such potential science, and also describe synergies with other missions.
△ Less
Submitted 4 March, 2024; v1 submitted 11 July, 2023;
originally announced July 2023.
-
ALMA Observations of the DART Impact: Characterizing the Ejecta at Sub-Millimeter Wavelengths
Authors:
Nathan X. Roth,
Stefanie N. Milam,
Anthony J. Remijan,
Martin A. Cordiner,
Michael W. Busch,
Cristina A. Thomas,
Andrew S. Rivkin,
Arielle Moullet,
Ted L. Roush,
Mark A. Siebert,
Jian-Yang Li,
Eugene G. Fahnestock,
Josep M. Trigo-Rodriguez,
Cyrielle Opitom,
Masatoshi Hirabayashi
Abstract:
We report observations of the Didymos-Dimorphos binary asteroid system using the Atacama Large Millimeter/Submillimeter Array (ALMA) and the Atacama Compact Array (ACA) in support of the Double Asteroid Redirection Test (DART) mission. Our observations on UT 2022 September 15 provided a pre-impact baseline and the first measure of Didymos-Dimorphos' spectral emissivity at $λ=0.87$ mm, which was co…
▽ More
We report observations of the Didymos-Dimorphos binary asteroid system using the Atacama Large Millimeter/Submillimeter Array (ALMA) and the Atacama Compact Array (ACA) in support of the Double Asteroid Redirection Test (DART) mission. Our observations on UT 2022 September 15 provided a pre-impact baseline and the first measure of Didymos-Dimorphos' spectral emissivity at $λ=0.87$ mm, which was consistent with the handful of siliceous and carbonaceous asteroids measured at millimeter wavelengths. Our post-impact observations were conducted using four consecutive executions each of ALMA and the ACA spanning from T$+$3.52 to T$+$8.60 hours post-impact, sampling thermal emission from the asteroids and the impact ejecta. We scaled our pre-impact baseline measurement and subtracted it from the post-impact observations to isolate the flux density of mm-sized grains in the ejecta. Ejecta dust masses were calculated for a range of materials that may be representative of Dimorphos' S-type asteroid material. The average ejecta mass over our observations is consistent with 1.3--6.4$\times10^7$ kg, with the lower and higher values calculated for amorphous silicates and for crystalline silicates, respectively. Owing to the likely crystalline nature of S-type asteroid material, the higher value is favored. These ejecta masses represent 0.3--1.5\% of Dimorphos' total mass and are in agreement with lower limits on the ejecta mass based on measurements at optical wavelengths. Our results provide the most sensitive measure of mm-sized material in the ejecta and demonstrate the power of ALMA for providing supporting observations to spaceflight missions.
△ Less
Submitted 27 September, 2023; v1 submitted 9 June, 2023;
originally announced June 2023.
-
Momentum Transfer from the DART Mission Kinetic Impact on Asteroid Dimorphos
Authors:
Andrew F. Cheng,
Harrison F. Agrusa,
Brent W. Barbee,
Alex J. Meyer,
Tony L. Farnham,
Sabina D. Raducan,
Derek C. Richardson,
Elisabetta Dotto,
Angelo Zinzi,
Vincenzo Della Corte,
Thomas S. Statler,
Steven Chesley,
Shantanu P. Naidu,
Masatoshi Hirabayashi,
Jian-Yang Li,
Siegfried Eggl,
Olivier S. Barnouin,
Nancy L. Chabot,
Sidney Chocron,
Gareth S. Collins,
R. Terik Daly,
Thomas M. Davison,
Mallory E. DeCoster,
Carolyn M. Ernst,
Fabio Ferrari
, et al. (44 additional authors not shown)
Abstract:
The NASA Double Asteroid Redirection Test (DART) mission performed a kinetic impact on asteroid Dimorphos, the satellite of the binary asteroid (65803) Didymos, at 23:14 UTC on September 26, 2022 as a planetary defense test. DART was the first hypervelocity impact experiment on an asteroid at size and velocity scales relevant to planetary defense, intended to validate kinetic impact as a means of…
▽ More
The NASA Double Asteroid Redirection Test (DART) mission performed a kinetic impact on asteroid Dimorphos, the satellite of the binary asteroid (65803) Didymos, at 23:14 UTC on September 26, 2022 as a planetary defense test. DART was the first hypervelocity impact experiment on an asteroid at size and velocity scales relevant to planetary defense, intended to validate kinetic impact as a means of asteroid deflection. Here we report the first determination of the momentum transferred to an asteroid by kinetic impact. Based on the change in the binary orbit period, we find an instantaneous reduction in Dimorphos's along-track orbital velocity component of 2.70 +/- 0.10 mm/s, indicating enhanced momentum transfer due to recoil from ejecta streams produced by the impact. For a Dimorphos bulk density range of 1,500 to 3,300 kg/m$^3$, we find that the expected value of the momentum enhancement factor, $β$, ranges between 2.2 and 4.9, depending on the mass of Dimorphos. If Dimorphos and Didymos are assumed to have equal densities of 2,400 kg/m$^3$, $β$= 3.61 +0.19/-0.25 (1 $σ$). These $β$ values indicate that significantly more momentum was transferred to Dimorphos from the esca** impact ejecta than was incident with DART. Therefore, the DART kinetic impact was highly effective in deflecting the asteroid Dimorphos.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
Successful Kinetic Impact into an Asteroid for Planetary Defense
Authors:
R. Terik Daly,
Carolyn M. Ernst,
Olivier S. Barnouin,
Nancy L. Chabot,
Andrew S. Rivkin,
Andrew F. Cheng,
Elena Y. Adams,
Harrison F. Agrusa,
Elisabeth D. Abel,
Amy L. Alford,
Erik I. Asphaug,
Justin A. Atchison,
Andrew R. Badger,
Paul Baki,
Ronald-L. Ballouz,
Dmitriy L. Bekker,
Julie Bellerose,
Shyam Bhaskaran,
Bonnie J. Buratti,
Saverio Cambioni,
Michelle H. Chen,
Steven R. Chesley,
George Chiu,
Gareth S. Collins,
Matthew W. Cox
, et al. (76 additional authors not shown)
Abstract:
While no known asteroid poses a threat to Earth for at least the next century, the catalog of near-Earth asteroids is incomplete for objects whose impacts would produce regional devastation. Several approaches have been proposed to potentially prevent an asteroid impact with Earth by deflecting or disrupting an asteroid. A test of kinetic impact technology was identified as the highest priority sp…
▽ More
While no known asteroid poses a threat to Earth for at least the next century, the catalog of near-Earth asteroids is incomplete for objects whose impacts would produce regional devastation. Several approaches have been proposed to potentially prevent an asteroid impact with Earth by deflecting or disrupting an asteroid. A test of kinetic impact technology was identified as the highest priority space mission related to asteroid mitigation. NASA's Double Asteroid Redirection Test (DART) mission is the first full-scale test of kinetic impact technology. The mission's target asteroid was Dimorphos, the secondary member of the S-type binary near-Earth asteroid (65803) Didymos. This binary asteroid system was chosen to enable ground-based telescopes to quantify the asteroid deflection caused by DART's impact. While past missions have utilized impactors to investigate the properties of small bodies those earlier missions were not intended to deflect their targets and did not achieve measurable deflections. Here we report the DART spacecraft's autonomous kinetic impact into Dimorphos and reconstruct the impact event, including the timeline leading to impact, the location and nature of the DART impact site, and the size and shape of Dimorphos. The successful impact of the DART spacecraft with Dimorphos and the resulting change in Dimorphos's orbit demonstrates that kinetic impactor technology is a viable technique to potentially defend Earth if necessary.
△ Less
Submitted 3 March, 2023;
originally announced March 2023.
-
Ejecta from the DART-produced active asteroid Dimorphos
Authors:
Jian-Yang Li,
Masatoshi Hirabayashi,
Tony L. Farnham,
Jessica M. Sunshine,
Matthew M. Knight,
Gonzalo Tancredi,
Fernando Moreno,
Brian Murphy,
Cyrielle Opitom,
Steve Chesley,
Daniel J. Scheeres,
Cristina A. Thomas,
Eugene G. Fahnestock,
Andrew F. Cheng,
Linda Dressel,
Carolyn M. Ernst,
Fabio Ferrari,
Alan Fitzsimmons,
Simone Ieva,
Stavro L. Ivanovski,
Teddy Kareta,
Ludmilla Kolokolova,
Tim Lister,
Sabina D. Raducan,
Andrew S. Rivkin
, et al. (39 additional authors not shown)
Abstract:
Some active asteroids have been proposed to be the result of impact events. Because active asteroids are generally discovered serendipitously only after their tail formation, the process of the impact ejecta evolving into a tail has never been directly observed. NASA's Double Asteroid Redirection Test (DART) mission, apart from having successfully changed the orbital period of Dimorphos, demonstra…
▽ More
Some active asteroids have been proposed to be the result of impact events. Because active asteroids are generally discovered serendipitously only after their tail formation, the process of the impact ejecta evolving into a tail has never been directly observed. NASA's Double Asteroid Redirection Test (DART) mission, apart from having successfully changed the orbital period of Dimorphos, demonstrated the activation process of an asteroid from an impact under precisely known impact conditions. Here we report the observations of the DART impact ejecta with the Hubble Space Telescope (HST) from impact time T+15 minutes to T+18.5 days at spatial resolutions of ~2.1 km per pixel. Our observations reveal a complex evolution of ejecta, which is first dominated by the gravitational interaction between the Didymos binary system and the ejected dust and later by solar radiation pressure. The lowest-speed ejecta dispersed via a sustained tail that displayed a consistent morphology with previously observed asteroid tails thought to be produced by impact. The ejecta evolution following DART's controlled impact experiment thus provides a framework for understanding the fundamental mechanisms acting on asteroids disrupted by natural impact.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
Tidal resurfacing model for (99942) Apophis during the 2029 close approach with Earth
Authors:
Y. Kim,
J. V. DeMartini,
D. C. Richardson,
M. Hirabayashi
Abstract:
We numerically investigate tidally induced surface refreshing on Apophis during its close approach with Earth within a perigee distance of 5.96 Earth radii on April 13, 2029. We implement a tidal resurfacing model with two stages: dynamics modeling of the entire body to determine time-varying accelerations and surface slope profiles felt by each surface patch during the 6-h-long closest encounter,…
▽ More
We numerically investigate tidally induced surface refreshing on Apophis during its close approach with Earth within a perigee distance of 5.96 Earth radii on April 13, 2029. We implement a tidal resurfacing model with two stages: dynamics modeling of the entire body to determine time-varying accelerations and surface slope profiles felt by each surface patch during the 6-h-long closest encounter, and DEM modeling to track motions of surface grains in localized patches. The surface slope profiles and measured grain motions are combined to statistically extrapolate the 'expected' percentage of resurfaced area. Using the tidal resurfacing model, we present surface maps showing the total expected resurfacing on Apophis given 3 representative encounter orientations. Our simulation results indicate that tidal resurfacing, limited to certain localized regions, will likely occur half an hour before perigee and on the scale of 1 per cent of Apophis's entire surface area. Our models indicate that the most likely locations to detect tidal resurfacing are: initially high-sloped regions (> 30 deg) regardless of the encounter orientation of Apophis, and mid-sloped regions (15 - 30 deg) that experience a significant positive slope variation (> 0.5 deg), which is mainly controlled by the encounter orientation. Expected data from ground-based observations of the 2029 flyby will help us better constrain the targeted locations likely to experience tidal resurfacing. We thus expect to find evidence supporting tidal resurfacing via further analysis of post-encounter surface images or albedo changes at the expected resurfaced areas.
△ Less
Submitted 30 January, 2023;
originally announced January 2023.
-
Energy Dissipation in Synchronous Binary Asteroids
Authors:
Alex J. Meyer,
Daniel J. Scheeres,
Harrison F. Agrusa,
Guillaume Noiset,
Jay McMahon,
Özgür Karatekin,
Masatoshi Hirabayashi,
Ryota Nakano
Abstract:
Synchronous binary asteroids can experience libration about their tidally-locked equilibrium, which will result in energy dissipation. This is an important topic to the Asteroid Impact and Deflection Assessment, where excitation caused by the DART kinetic impact in the Didymos binary asteroid system may be reduced through dissipation before Hera arrives to survey the effects of the impact. We deve…
▽ More
Synchronous binary asteroids can experience libration about their tidally-locked equilibrium, which will result in energy dissipation. This is an important topic to the Asteroid Impact and Deflection Assessment, where excitation caused by the DART kinetic impact in the Didymos binary asteroid system may be reduced through dissipation before Hera arrives to survey the effects of the impact. We develop a numeric model for energy dissipation in binary asteroids to explore how different system configurations affect the rate of energy dissipation. We find tumbling within the synchronous state eliminates a systematic trend in libration dam** on short timescales (several years), but not over long times (hundreds of years) depending on the material conditions. Furthermore, dam** of libration, eccentricity, and fluctuations in the semimajor axis are primarily dependent on the stiffness of the secondary, whereas the semimajor axis secular expansion rate is dictated by the stiffness of the primary, as expected. Systems experiencing stable planar libration in the secondary can see a noticeable reduction in libration amplitude after only a few years depending on the stiffness of the secondary, and thus dissipation should be considered during Hera's survey of Didymos. For a very dissipative secondary undergoing stable libration, Hera may be able to calculate the rate of libration dam** in Dimorphos and therefore constrain its tidal parameters.
△ Less
Submitted 19 October, 2022;
originally announced October 2022.
-
After DART: Using the first full-scale test of a kinetic impactor to inform a future planetary defense mission
Authors:
Thomas S. Statler,
Sabina D. Raducan,
Olivier S. Barnouin,
Mallory E. DeCoster,
Steven R. Chesley,
Brent Barbee,
Harrison F. Agrusa,
Saverio Cambioni,
Andrew F. Cheng,
Elisabetta Dotto,
Siegfried Eggl,
Eugene G. Fahnestock,
Fabio Ferrari,
Dawn Graninger,
Alain Herique,
Isabel Herreros,
Masatoshi Hirabayashi,
Stavro Ivanovski,
Martin Jutzi,
Özgür Karatekin,
Alice Lucchetti,
Robert Luther,
Rahil Makadia,
Francesco Marzari,
Patrick Michel
, et al. (16 additional authors not shown)
Abstract:
NASA's Double Asteroid Redirection Test (DART) is the first full-scale test of an asteroid deflection technology. Results from the hypervelocity kinetic impact and Earth-based observations, coupled with LICIACube and the later Hera mission, will result in measurement of the momentum transfer efficiency accurate to ~10% and characterization of the Didymos binary system. But DART is a single experim…
▽ More
NASA's Double Asteroid Redirection Test (DART) is the first full-scale test of an asteroid deflection technology. Results from the hypervelocity kinetic impact and Earth-based observations, coupled with LICIACube and the later Hera mission, will result in measurement of the momentum transfer efficiency accurate to ~10% and characterization of the Didymos binary system. But DART is a single experiment; how could these results be used in a future planetary defense necessity involving a different asteroid? We examine what aspects of Dimorphos's response to kinetic impact will be constrained by DART results; how these constraints will help refine knowledge of the physical properties of asteroidal materials and predictive power of impact simulations; what information about a potential Earth impactor could be acquired before a deflection effort; and how design of a deflection mission should be informed by this understanding. We generalize the momentum enhancement factor $β$, showing that a particular direction-specific $β$ will be directly determined by the DART results, and that a related direction-specific $β$ is a figure of merit for a kinetic impact mission. The DART $β$ determination constrains the ejecta momentum vector, which, with hydrodynamic simulations, constrains the physical properties of Dimorphos's near-surface. In a hypothetical planetary defense exigency, extrapolating these constraints to a newly discovered asteroid will require Earth-based observations and benefit from in-situ reconnaissance. We show representative predictions for momentum transfer based on different levels of reconnaissance and discuss strategic targeting to optimize the deflection and reduce the risk of a counterproductive deflection in the wrong direction.
△ Less
Submitted 23 September, 2022;
originally announced September 2022.
-
Rotation-induced granular motion on the secondary component of binary asteroids: Application to the DART impact on Dimorphos
Authors:
Harrison Agrusa,
Ronald Ballouz,
Alex J. Meyer,
Elisa Tasev,
Guillaume Noiset,
Özgur Karatekin,
Patrick Michel,
Derek C. Richardson,
Masatoshi Hirabayashi
Abstract:
NASA's Double Asteroid Redirection Test (DART) mission will kinetically impact Dimorphos, the secondary component of the Didymos binary asteroid system, which will excite Dimorphos's dynamical state and lead to significant libration about the synchronous state and possibly chaotic non-principal axis rotation. Although this particular outcome is human caused, many other secondary components of bina…
▽ More
NASA's Double Asteroid Redirection Test (DART) mission will kinetically impact Dimorphos, the secondary component of the Didymos binary asteroid system, which will excite Dimorphos's dynamical state and lead to significant libration about the synchronous state and possibly chaotic non-principal axis rotation. Although this particular outcome is human caused, many other secondary components of binary systems are also prone to such exotic spin states. For a satellite in an excited spin state, the time-varying tidal and rotational environment can lead to significant surface accelerations. Depending on the circumstances, this mechanism may drive granular motion on the surface of the secondary. We modeled the dynamical evolution of a Didymos-like binary asteroid system using a fully coupled, three-dimensional simulation code. Then, we computed the time-varying gravitational and rotational accelerations felt over the entire surface resulting from the secondary's perturbed dynamical state. We find that an excited spin and orbit can induce large changes in the effective surface slope, potentially triggering granular motion and surface refreshment. However, for the case of the DART impact, this effect is highly dependent on many unknowns, such as Dimorphos's detailed shape, bulk density, surface geology, and the momentum transferred. Aside from the Didymos system and the DART mission, this effect also has important implications for binary systems in general.
△ Less
Submitted 28 July, 2022;
originally announced July 2022.
-
Predictions for the Dynamical States of the Didymos System before and after the Planned DART Impact
Authors:
Derek C. Richardson,
Harrison F. Agrusa,
Brent Barbee,
William F. Bottke,
Andrew F. Cheng,
Siegfried Eggl,
Fabio Ferrari,
Masatoshi Hirabayashi,
Özgür Karatekin,
Jay McMahon,
Stephen R. Schwartz,
Ronald-Louis Ballouz,
Adriano Campo Bagatin,
Elisabetta Dotto,
Eugene G. Fahnestock,
Oscar Fuentes-Muñoz,
Ioannis Gkolias,
Douglas P. Hamilton,
Seth A. Jacobson,
Martin Jutzi,
Josh Lyzhoft,
Rahil Makadia,
Alex J. Meyer,
Patrick Michel,
Ryota Nakano
, et al. (11 additional authors not shown)
Abstract:
NASA's Double Asteroid Redirection Test (DART) spacecraft is planned to impact the natural satellite of (65803) Didymos, Dimorphos, around 23:14 UTC on 26 September 2022, causing a reduction in its orbital period that will be measurable with ground-based observations. This test of kinetic impactor technology will provide the first estimate of the momentum transfer enhancement factor $β$ at a reali…
▽ More
NASA's Double Asteroid Redirection Test (DART) spacecraft is planned to impact the natural satellite of (65803) Didymos, Dimorphos, around 23:14 UTC on 26 September 2022, causing a reduction in its orbital period that will be measurable with ground-based observations. This test of kinetic impactor technology will provide the first estimate of the momentum transfer enhancement factor $β$ at a realistic scale, wherein ejecta from the impact provides an additional deflection to the target. Earth-based observations, the LICIACube spacecraft (to be detached from DART prior to impact), and ESA's follow-up Hera mission to launch in 2024, will provide additional characterization of the deflection test. Together Hera and DART comprise the Asteroid Impact and Deflection Assessment (AIDA) cooperation between NASA and ESA. Here the predicted dynamical states of the binary system upon arrival and after impact are presented. The assumed dynamically relaxed state of the system will be excited by the impact, leading to an increase in eccentricity and slight tilt of the orbit together with enhanced libration of Dimorphos with amplitude dependent on the currently poorly known target shape. Free rotation around the moon's long axis may also be triggered and the orbital period will experience variations from seconds to minutes over timescales of days to months. Shape change of either body due to cratering or mass wasting triggered by crater formation and ejecta may affect $β$ but can be constrained through additional measurements. Both BYORP and gravity tides may cause measurable orbital changes on the timescale of Hera's rendezvous.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
A numerical approach using a finite element model to constrain the possible interior layout of (16) Psyche
Authors:
Yaeji Kim,
Masatoshi Hirabayashi
Abstract:
Asteroid (16) Psyche is notable for the largest M-type asteroid and has the high radar albedo among the main-belt asteroids. The object is likely a mixture of metal and silicates because of its lower bulk density than metallic materials and observations inferring the existence of silicate materials on the surface. Here, we numerically investigate the interior layout when the structure of Psyche co…
▽ More
Asteroid (16) Psyche is notable for the largest M-type asteroid and has the high radar albedo among the main-belt asteroids. The object is likely a mixture of metal and silicates because of its lower bulk density than metallic materials and observations inferring the existence of silicate materials on the surface. Here, we numerically investigate the interior layout when the structure of Psyche consists of a spherical iron core and two types of silicate-rich layers (compressed and uncompressed ones resulting from the compaction process. We develop an inverse problem algorithm to determine the layout distribution by combining a Finite Element Model approach that accounts for density variations and constrains pressure-based crushing conditions. The results show that given the crushing limit of 10 MPa the smallest core size likely reaches 72 km in radius, and the silicate-rich layer, consisting of both compressed and uncompressed regions, has a thickness ranging up to 68 km. To support the localized metal concentration at the crater-like region detected in the recent radar observation, we give more constraints on the minimum core size which takes up to 34 - 40 % of the entire size of Psyche. Our study also addresses that the ferrovolcanic surface eruptions could still be a source of metal-rich materials. Finally, while the differentiated structure having a spherical core condition is just part of potential scenarios, the present study infers that the core and compressed layer conditions likely control the surface condition.
△ Less
Submitted 29 April, 2022;
originally announced April 2022.
-
Active Main-Belt Asteroid (6478) Gault -- Constraint on Its Cohesive Strength and the Fate of Ejected Particles in the Solar System
Authors:
Pierce M. Jackson,
Ryota Nakano,
Yaeji Kim,
Masatoshi Hirabayashi
Abstract:
Active asteroid (6478) Gault sheds mass independent of location along its orbit. Rotational instability is considered to induce the observed activities. If this is the case, because Gaults breakup event has not been detected, surface failure is likely, implying its surface materials are constantly ejected while its major body remains intact. Given this scenario, we first constrain Gaults bulk cohe…
▽ More
Active asteroid (6478) Gault sheds mass independent of location along its orbit. Rotational instability is considered to induce the observed activities. If this is the case, because Gaults breakup event has not been detected, surface failure is likely, implying its surface materials are constantly ejected while its major body remains intact. Given this scenario, we first constrain Gaults bulk cohesive strength. We then characterize heliocentric trajectories of ejected particles over thousands of years. The results show that Gault may be sensitive to structural failure at the current spin period (~ 2.5 hr). Gaults bulk density needs to be below 1.75 g/cm^3 in order for particles on the equatorial surface to be shed due to centrifugal forces. In this case, Gault requires cohesive strength of at least ~ 200 Pa to maintain the structure at the center, whereas the surface strength needs to be less than ~ 100 Pa to induce mass shedding. This suggests that Gaults structure may consist of a weak surface layer atop a strong core. The trajectories of dust ejected from Gault depend on how efficiently they are accelerated by solar radiation pressure. Escaped particle clouds with sizes on the order of 100 micrometers could collide with Gault after about 700 to 5300 years with speeds of ~ 0.2 km/sec. This implies a temporal increase in the impact flux and complex interactions between the ejected particles and their host body.
△ Less
Submitted 21 December, 2021;
originally announced December 2021.
-
The Excited Spin State of Dimorphos Resulting from the DART Impact
Authors:
Harrison F. Agrusa,
Ioannis Gkolias,
Kleomenis Tsiganis,
Derek C. Richardson,
Alex J. Meyer,
Daniel J. Scheeres,
Matija Ćuk,
Seth A. Jacobson,
Patrick Michel,
Özgür Karatekin,
Andrew F. Cheng,
Masatoshi Hirabayashi,
Yun Zhang,
Eugene G. Fahnestock,
Alex B. Davis
Abstract:
The NASA Double Asteroid Redirection Test (DART) mission is a planetary defense-driven test of a kinetic impactor on Dimorphos, the satellite of the binary asteroid 65803 Didymos. DART will intercept Dimorphos at a relative speed of ${\sim}6.5 \text{ km s}^{-1}$, perturbing Dimorphos's orbital velocity and changing the binary orbital period. We present three independent methods (one analytic and t…
▽ More
The NASA Double Asteroid Redirection Test (DART) mission is a planetary defense-driven test of a kinetic impactor on Dimorphos, the satellite of the binary asteroid 65803 Didymos. DART will intercept Dimorphos at a relative speed of ${\sim}6.5 \text{ km s}^{-1}$, perturbing Dimorphos's orbital velocity and changing the binary orbital period. We present three independent methods (one analytic and two numerical) to investigate the post-impact attitude stability of Dimorphos as a function of its axial ratios, $a/b$ and $b/c$ ($a \ge b \ge c$), and the momentum transfer efficiency $β$. The first method uses a novel analytic approach in which we assume a circular orbit and a point-mass primary that identifies four fundamental frequencies of motion corresponding to the secondary's mean motion, libration, precession, and nutation frequencies. At resonance locations among these four frequencies, we find that attitude instabilities are possible. Using two independent numerical codes, we recover many of the resonances predicted by the analytic model and indeed show attitude instability. With one code, we use fast Lyapunov indicators to show that the secondary's attitude can evolve chaotically near the resonance locations. Then, using a high-fidelity numerical model, we find that Dimorphos enters a chaotic tumbling state near the resonance locations and is especially prone to unstable rotation about its long axis, which can be confirmed by ESA's Hera mission arriving at Didymos in late 2026. We also show that a fully coupled treatment of the spin and orbital evolution of both bodies is crucial to accurately model the long-term evolution of the secondary's spin state and libration amplitude. Finally, we discuss the implications of a post-impact tumbling or rolling state, including the possibility of terminating BYORP evolution if Dimorphos is no longer in synchronous rotation.
△ Less
Submitted 29 July, 2021; v1 submitted 16 July, 2021;
originally announced July 2021.
-
Hayabusa2 Extended Mission: New Voyage to Rendezvous with a Small Asteroid Rotating with a Short Period
Authors:
M. Hirabayashi,
Y. Mimasu,
N. Sakatani,
S. Watanabe,
Y. Tsuda,
T. Saiki,
S. Kikuchi,
T. Kouyama,
M. Yoshikawa,
S. Tanaka,
S. Nakazawa,
Y. Takei,
F. Terui,
H. Takeuchi,
A. Fujii,
T. Iwata,
K. Tsumura,
S. Matsuura,
Y. Shimaki,
S. Urakawa,
Y. Ishibashi,
S. Hasegawa,
M. Ishiguro,
D. Kuroda,
S. Okumura
, et al. (19 additional authors not shown)
Abstract:
Hayabusa2 is the Japanese Asteroid Return Mission and targeted the carbonaceous asteroid Ryugu, conducted by the Japan Aerospace Exploration Agency (JAXA). The goal of this mission was to conduct proximity operations including remote sensing observations, material sampling, and a Small Carry-On Impact experiment, as well as sample analyses. As of September 2020, the spacecraft is on the way back t…
▽ More
Hayabusa2 is the Japanese Asteroid Return Mission and targeted the carbonaceous asteroid Ryugu, conducted by the Japan Aerospace Exploration Agency (JAXA). The goal of this mission was to conduct proximity operations including remote sensing observations, material sampling, and a Small Carry-On Impact experiment, as well as sample analyses. As of September 2020, the spacecraft is on the way back to Earth with samples from Ryugu with no critical issues after the successful departure in November 2019. Here, we propose an extended mission in which the spacecraft will rendezvous with a small asteroid with ~30 m - ~40 m in diameter that is rotating at a spin period of ~10 min after an additional ~10-year cruise phase. We introduce that two scenarios are suitable for the extended mission. In the first scenario, the spacecraft will perform swing-by maneuvers at Venus once and Earth twice to arrive at asteroid 2001 AV43. In the second scenario, it will perform swing-by maneuvers at Earth twice to reach asteroid 1998 KY26. In both scenarios, the mission will continue until the early 2030s. JAXA recently released the decision that the spacecraft will rendezvous with 1998 KY26. This paper focuses on our scientific assessments of the two scenarios but leaves the decision process to go to 1998 KY26 for future reports. Rendezvous operations will be planned to detail the physical properties and surrounding environments of the target, one of the smallest elements of small planetary bodies. By achieving the planned operations, the mission will provide critical hints on the violent histories of collisions and accumulations of small bodies in the solar system. Furthermore, the established scientific knowledge and techniques will advance key technologies for planetary defense.
△ Less
Submitted 17 April, 2021;
originally announced April 2021.
-
The surface sensitivity of rubble-pile asteroids during a distant planetary encounter: Influence of asteroid shape elongation
Authors:
Yaeji Kim,
Masatoshi Hirabayashi,
Richard P Binzel,
Marina Brozović,
Daniel J Scheeres,
Derek C Richardson
Abstract:
We numerically investigate how an asteroid's elongation controls the sensitivity of its surface to tidal effects during a distant planetary encounter beyond the Roche limit. We analyze the surface slope and its variation by considering the shape elongation, as well as the spin period and orbital conditions. A more elongated asteroid tends to have a higher slope variation, while there may not be a…
▽ More
We numerically investigate how an asteroid's elongation controls the sensitivity of its surface to tidal effects during a distant planetary encounter beyond the Roche limit. We analyze the surface slope and its variation by considering the shape elongation, as well as the spin period and orbital conditions. A more elongated asteroid tends to have a higher slope variation, while there may not be a monotonic increase of the total area having such a variation
△ Less
Submitted 4 November, 2020;
originally announced November 2020.
-
Spin-driven evolution of asteroids' top-shapes at fast and slow spins seen from (101955) Bennu and (162173) Ryugu
Authors:
Masatoshi Hirabayashi,
Ryota Nakano,
Eri Tatsumi,
Kevin J. Walsh,
Olivier S. Barnouin,
Patrick Michel,
Christine M. Hartzell,
Daniel T. Britt,
Seiji Sugita,
Sei-ichiro Watanabe,
William F. Bottke,
Daniel J. Scheeres,
Ronald-Louis Ballouz,
Yuichiro Cho,
Tomokatsu Morota,
Ellen S. Howell,
Dante S. Lauretta
Abstract:
Proximity observations by OSIRIS-REx and Hayabusa2 provided clues on the shape evolution processes of the target asteroids, (101955) Bennu and (162173) Ryugu. Their oblate shapes with equatorial ridges, or the so-called top shapes, may have evolved due to their rotational conditions at present and in the past. Different shape evolution scenarios were previously proposed; Bennu's top shape may have…
▽ More
Proximity observations by OSIRIS-REx and Hayabusa2 provided clues on the shape evolution processes of the target asteroids, (101955) Bennu and (162173) Ryugu. Their oblate shapes with equatorial ridges, or the so-called top shapes, may have evolved due to their rotational conditions at present and in the past. Different shape evolution scenarios were previously proposed; Bennu's top shape may have been driven by surface processing, while Ryugu's may have been developed due to large deformation. These two scenarios seem to be inconsistent. Here, we revisit the structural analyses in earlier works and fill a gap to connect these explanations. We also apply a semi-analytical technique for computing the cohesive strength distribution in a uniformly rotating triaxial ellipsoid to characterize the global failure of top-shaped bodies. Assuming that the structure is uniform, our semi-analytical approach describes the spatial variations in failed regions at different spin periods; surface regions are the most sensitive at longer spin periods, while interiors fail structurally at shorter spin periods. This finding suggests that the shape evolution of a top shape may vary due to rotation and internal structure, which can explain the different evolution scenarios of Bennu's and Ryugu's top shapes. We interpret our results as the indications of top shapes' various evolution processes.
△ Less
Submitted 10 August, 2020;
originally announced August 2020.
-
Mass shedding activities of Asteroid (3200) Phaethon enhanced by its rotation
Authors:
Ryota Nakano,
Masatoshi Hirabayashi
Abstract:
Asteroid (3200) Phaethon, a B-type asteroid, has been active during its perihelion passages. This asteroid is considered to be a source of the Geminid meteor stream. It is reported that this asteroid is spinning at a rotation period of $3.60 \ hr$ and has a top shape (an oblate body with an equatorial ridge) with a mean equatorial diameter of $6.25 \ km$. Here, we report that Phaethon's rotation s…
▽ More
Asteroid (3200) Phaethon, a B-type asteroid, has been active during its perihelion passages. This asteroid is considered to be a source of the Geminid meteor stream. It is reported that this asteroid is spinning at a rotation period of $3.60 \ hr$ and has a top shape (an oblate body with an equatorial ridge) with a mean equatorial diameter of $6.25 \ km$. Here, we report that Phaethon's rotation state may be close to or above its critical rotation period when the bulk density is $0.5 \ - \ 1.5 \ {g/cm^3}$ (a typical bulk density of a B-type asteroid). We found that in this condition, the structure of Phaethon is sensitive to failure unless the cohesive strength is ${\sim}50 \ Pa \ - \ {\sim}260 \ Pa$. This result implies that if there are some surface processes driven by, for example, thermal waves, large-scaled deformation may happen and cause mass shedding. From this interpretation, we propose the processes that produced the Geminid meteor stream in the past and dust tails recently. Phaethon initially rotated at a spin period shorter than the current period. The magnitude of structural deformation at this stage was higher than the present spin condition, and a large mass shedding event, i.e., the Geminid meteor stream, occurred. After this deformation process, the body became more oblate, and its spin slowed down. At this point, while the spin was high enough for the body to have mass shedding events, the magnitude of these events became small.
△ Less
Submitted 6 March, 2020;
originally announced March 2020.
-
The Western Bulge of 162173 Ryugu Formed as a Result of a Rotationally Driven Deformation Process
Authors:
Masatoshi Hirabayashi,
Eri Tatsumi,
Hideaki Miyamoto,
Goro Komatsu,
Seiji Sugita,
Sei-ichiro Watanabe,
Daniel J. Scheeres,
Olivier S. Barnouin,
Patrick Michel,
Chikatoshi Honda,
Tatsuhiro Michikami,
Yuichiro Cho,
Tomokatsu Morota,
Naru Hirata,
Naoyuki Hirata,
Naoya Sakatani,
Stephen R. Schwartz,
Rie Honda,
Yasuhiro Yokota,
Shingo Kameda,
Hidehiko Suzuki,
Toru Kouyama,
Masahiko Hayakawa,
Moe Matsuoka,
Kazuo Yoshioka
, et al. (4 additional authors not shown)
Abstract:
162173 Ryugu, the target of Hayabusa2, has a round shape with an equatorial ridge, which is known as a spinning top-shape. A strong centrifugal force is a likely contributor to Ryugu's top-shaped features. Observations by Optical Navigation Camera onboard Hayabusa2 show a unique longitudinal variation in geomorphology; the western side of this asteroid, later called the western bulge, has a smooth…
▽ More
162173 Ryugu, the target of Hayabusa2, has a round shape with an equatorial ridge, which is known as a spinning top-shape. A strong centrifugal force is a likely contributor to Ryugu's top-shaped features. Observations by Optical Navigation Camera onboard Hayabusa2 show a unique longitudinal variation in geomorphology; the western side of this asteroid, later called the western bulge, has a smooth surface and a sharp equatorial ridge, compared to the other side. Here, we propose a structural deformation process that generated the western bulge. Applying the mission-derived shape model, we employ a finite element model technique to analyze the locations that experience structural failure within the present shape. Assuming that materials are uniformly distributed, our model shows the longitudinal variation in structurally failed regions when the spin period is shorter than ~3.75 h. Ryugu is structurally intact in the subsurface region of the western bulge while other regions are sensitive to structural failure. We infer that this variation is indicative of the deformation process that occurred in the past, and the western bulge is more relaxed structurally than the other region. Our analysis also shows that this deformation process might occur at a spin period between ~3.5 h and ~3.0 h, providing the cohesive strength ranging between ~4 Pa and ~10 Pa.
△ Less
Submitted 6 April, 2019;
originally announced April 2019.
-
The equilibrium size-frequency distribution of small craters reveals the effects of distal ejecta on lunar landscape morphology
Authors:
David A. Minton,
Caleb I. Fassett,
Masatoshi Hirabayashi,
Bryan A. Howl,
James E. Richardson
Abstract:
Small craters of the lunar maria are observed to be in a state of equilibrium, in which the rate of production of new craters is, on average, equal to the rate of destruction of old craters. Crater counts of multiple lunar terrains over decades consistently show that the equilibrium cumulative size-frequency distribution (SFD) per unit area of small craters of radius >r is proportional r^(-2), and…
▽ More
Small craters of the lunar maria are observed to be in a state of equilibrium, in which the rate of production of new craters is, on average, equal to the rate of destruction of old craters. Crater counts of multiple lunar terrains over decades consistently show that the equilibrium cumulative size-frequency distribution (SFD) per unit area of small craters of radius >r is proportional r^(-2), and that the total crater density is a few percent of so-called geometric saturation, which is the maximum theoretical packing density of circular features. While it has long been known that the primary crater destruction mechanism for these small craters is steady diffusive degradation, there are few quantitative constraints on the processes that determine the degradation rate of meter to kilometer scale lunar surface features. Here we combine analytical modeling with a Monte Carlo landscape evolution code known as the Cratered Terrain Evolution Model to place constraints on which processes control the observed equilibrium size-frequency distribution for small craters. We find that the impacts by small distal ejecta fragments, distributed in spatially heterogeneous rays, is the largest contributor to the diffusive degradation which controls the equilibrium SFD of small craters. Other degradation or crater removal mechanisms, such cookie cutting, ejecta burial, seismic shaking, and micrometeoroid bombardment, likely contribute very little to the diffusive topographic degradation of the lunar maria at the meter scale and larger.
△ Less
Submitted 20 February, 2019;
originally announced February 2019.
-
Rotationally induced failure of irregularly shaped asteroids
Authors:
Masatoshi Hirabayashi,
Daniel J. Scheeres
Abstract:
Many asteroids are rubble piles with irregular shapes. While the irregular shapes of large asteroids may be attributed to collisional events, those of small asteroids may result from not only impact events but also rotationally induced failure, a long-term consequence of small torques caused by, for example, solar radiation pressure. A better understanding of shape deformation induced by such smal…
▽ More
Many asteroids are rubble piles with irregular shapes. While the irregular shapes of large asteroids may be attributed to collisional events, those of small asteroids may result from not only impact events but also rotationally induced failure, a long-term consequence of small torques caused by, for example, solar radiation pressure. A better understanding of shape deformation induced by such small torques will allow us to give constraints on the evolution process of an asteroid and its structure. However, no quantitative study has been reported to provide the relationship between an asteroid's shape and its failure mode due to its fast rotation. Here, we use a finite element model (FEM) technique to analyze the failure modes and conditions of 24 asteroids with diameters less than 30 - 40 km, which were observed at high resolution by ground radar or asteroid exploration missions. Assuming that the material distribution is uniform, we investigate how these asteroids fail structurally at different spin rates. Our FEM simulations describe the detailed deformation mode of each irregularly shaped asteroid at fast spin. The failed regions depend on the original shape. Spheroidal objects structurally fail from the interior, while elongated objects experience structural failure on planes perpendicular to the minimum moment of inertia axes in the middle of their structure. Contact binary objects have structural failure across their most sensitive cross sections. We further investigate if our FEM analysis is consistent with earlier works that theoretically explored a uniformly rotating triaxial ellipsoid. The results show that global shape variations may significantly change the failure condition of an asteroid. Our work suggests that it is critical to take into account the actual shapes of asteroids to explore their failure modes in detail.
△ Less
Submitted 6 August, 2018;
originally announced August 2018.
-
The role of breccia lenses in regolith generation from the formation of small, simple craters: Application to the Apollo 15 landing site
Authors:
M. Hirabayashi,
B. A. Howl,
C. I. Fassett,
J. M. Soderblom,
D. A. Minton,
H. J. Melosh
Abstract:
Impact cratering is likely a primary agent of regolith generation on airless bodies. Regolith production via impact cratering has long been a key topic of study since the Apollo era. The evolution of regolith due to impact cratering, however, is not well understood. A better formulation is needed to help quantify the formation mechanism and timescale of regolith evolution. Here, we propose an anal…
▽ More
Impact cratering is likely a primary agent of regolith generation on airless bodies. Regolith production via impact cratering has long been a key topic of study since the Apollo era. The evolution of regolith due to impact cratering, however, is not well understood. A better formulation is needed to help quantify the formation mechanism and timescale of regolith evolution. Here, we propose an analytically derived stochastic model that describes the evolution of regolith generated by small, simple craters. We account for ejecta blanketing as well as regolith infilling of the transient crater cavity. Our results show that the regolith infilling plays a key role in producing regolith. Our model demonstrates that, because of the stochastic nature of impact cratering, the regolith thickness varies laterally, which is consistent with earlier work. We apply this analytical model to the regolith evolution at the Apollo 15 site. The regolith thickness is computed considering the observed crater size-frequency distribution of small, simple lunar craters (< 381 m in radius for ejecta blanketing and < 100 m in radius for the regolith infilling). Allowing for some amount of regolith coming from the outside of the area, our result is consistent with an empirical result from the Apollo 15 seismic experiment. Finally, we find that the timescale of regolith growth is longer than that of crater equilibrium, implying that even if crater equilibrium is observed on a cratered surface, it is likely the regolith thickness is still evolving due to additional impact craters.
△ Less
Submitted 10 February, 2018;
originally announced February 2018.
-
Constraints on the perturbed mutual motion in Didymos due to impact-induced deformation of its primary after the DART impact
Authors:
Masatoshi Hirabayashi,
Stephen R. Schwartz,
Yang Yu,
Alex B. Davis,
Steven R. Chesley,
Eugene G. Fahnestock,
Patrick Michel,
Derek C. Richardson,
Shantanu P. Naidu,
Daniel J. Scheeres,
Andrew F. Cheng,
Andrew S. Rivkin,
Lance A. M. Benner
Abstract:
Binary near-Earth asteroid (65803) Didymos is the target of the proposed NASA Double Asteroid Redirection Test (DART), part of the Asteroid Impact & Deflection Assessment (AIDA) mission concept. In this mission, the DART spacecraft is planned to impact the secondary body of Didymos, perturbing mutual dynamics of the system. The primary body is currently rotating at a spin period close to the spin…
▽ More
Binary near-Earth asteroid (65803) Didymos is the target of the proposed NASA Double Asteroid Redirection Test (DART), part of the Asteroid Impact & Deflection Assessment (AIDA) mission concept. In this mission, the DART spacecraft is planned to impact the secondary body of Didymos, perturbing mutual dynamics of the system. The primary body is currently rotating at a spin period close to the spin barrier of asteroids, and materials ejected from the secondary due to the DART impact are likely to reach the primary. These conditions may cause the primary to reshape, due to landslides, or internal deformation, changing the permanent gravity field. Here, we propose that if shape deformation of the primary occurs, the mutual orbit of the system would be perturbed due to a change in the gravity field. We use a numerical simulation technique based on the full two-body problem to investigate the shape effect on the mutual dynamics in Didymos after the DART impact. The results show that under constant volume, shape deformation induces strong perturbation in the mutual motion. We find that the deformation process always causes the orbital period of the system to become shorter. If surface layers with a thickness greater than ~0.4 m on the poles of the primary move down to the equatorial region due to the DART impact, a change in the orbital period of the system and in the spin period of the primary will be detected by ground-based measurement.
△ Less
Submitted 6 August, 2017;
originally announced August 2017.
-
An analytical model of crater count equilibrium
Authors:
Masatoshi Hirabayashi,
David A. Minton,
Caleb I. Fassett
Abstract:
Crater count equilibrium occurs when new craters form at the same rate that old craters are erased, such that the total number of observable impacts remains constant. Despite substantial efforts to understand this process, there remain many unsolved problems. Here, we propose an analytical model that describes how a heavily cratered surface reaches a state of crater count equilibrium. The proposed…
▽ More
Crater count equilibrium occurs when new craters form at the same rate that old craters are erased, such that the total number of observable impacts remains constant. Despite substantial efforts to understand this process, there remain many unsolved problems. Here, we propose an analytical model that describes how a heavily cratered surface reaches a state of crater count equilibrium. The proposed model formulates three physical processes contributing to crater count equilibrium: cookie-cutting (simple, geometric overlap), ejecta-blanketing, and sandblasting (diffusive erosion). These three processes are modeled using a degradation parameter that describes the efficiency for a new crater to erase old craters. The flexibility of our newly developed model allows us to represent the processes that underlie crater count equilibrium problems. The results show that when the slope of the production function is steeper than that of the equilibrium state, the power law of the equilibrium slope is independent of that of the production function slope. We apply our model to the cratering conditions in the Sinus Medii region and at the Apollo 15 landing site on the Moon and demonstrate that a consistent degradation parameterization can successfully be determined based on the empirical results of these regions. Further developments of this model will enable us to better understand the surface evolution of airless bodies due to impact bombardment.
△ Less
Submitted 2 January, 2017;
originally announced January 2017.
-
Failure modes and conditions of a cohesive, spherical body due to YORP spin-up
Authors:
Masatoshi Hirabayashi
Abstract:
This paper presents transition of the failure mode of a cohesive, spherical body due to YORP spin-up. On the assumption that the distribution of materials in the body is homogeneous, failed regions first appearing in the body at different spin rates are predicted by comparing the yield condition of an elastic stress in the body. It is found that as the spin rate increases, the locations of the fai…
▽ More
This paper presents transition of the failure mode of a cohesive, spherical body due to YORP spin-up. On the assumption that the distribution of materials in the body is homogeneous, failed regions first appearing in the body at different spin rates are predicted by comparing the yield condition of an elastic stress in the body. It is found that as the spin rate increases, the locations of the failed regions move from the equatorial surface to the central region. To avoid such failure modes, the body should have higher cohesive strength. The results by this model are consistent with those by a plastic finite element model. Then, this model and a two-layered-cohesive model first proposed by Hirabayashi et al. are used to classify possible evolution and disruption of a spherical body. There are three possible pathways to disruption. First, because of a strong structure, failure of the central region is dominant and eventually leads to a breakup into multiple components. Second, a weak surface and a weak interior make the body oblate. Third, a strong internal core prevents the body from failing and only allows surface shedding. This implies that observed failure modes may highly depend on the internal structure of an asteroid, which could provide crucial information for giving constraints on the physical properties.
△ Less
Submitted 27 August, 2015;
originally announced August 2015.
-
Internal Structure of Asteroids Having Surface Shedding due to Rotational Instability
Authors:
Masatoshi Hirabayashi,
Diego Paul S'anchez,
Daniel J. Scheeres
Abstract:
Surface shedding of an asteroid is a failure mode where surface materials fly off due to strong centrifugal forces beyond the critical spin period, while the internal structure does not deform significantly. This paper proposes a possible structure of an asteroid interior that leads to such surface shedding due to rapid rotation rates. A rubble pile asteroid is modeled as a spheroid composed of a…
▽ More
Surface shedding of an asteroid is a failure mode where surface materials fly off due to strong centrifugal forces beyond the critical spin period, while the internal structure does not deform significantly. This paper proposes a possible structure of an asteroid interior that leads to such surface shedding due to rapid rotation rates. A rubble pile asteroid is modeled as a spheroid composed of a surface shell and a concentric internal core, the entire assembly called the test body. The test body is assumed to be uniformly rotating around a constant rotation axis. We also assume that while the bulk density and the friction angle are constant, the cohesion of the surface shell is different from that of the internal core. First, develo** an analytical model based on limit analysis, we provide the upper and lower bounds for the actual surface shedding condition. Second, we use a Soft-Sphere Discrete Element Method (SSDEM) to study dynamical deformation of the test body due to a quasi-static spin-up. In this paper we show the consistency of both approaches. Additionally, the SSDEM simulations show that the initial failure always occurs locally and not globally. In addition, as the core becomes larger, the size of lofted components becomes smaller. These results imply that if there is a strong enough core in a progenitor body, surface shedding is the most likely failure mode.
△ Less
Submitted 10 June, 2015;
originally announced June 2015.
-
Stress and Failure Analysis of Rapidly Rotating Asteroid (29075) 1950 DA
Authors:
Masatoshi Hirabayashi,
Daniel J. Scheeres
Abstract:
Rozitis et al. recently reported that near-Earth asteroid (29075) 1950 DA, whose bulk density ranges from 1.0 g/cm3 to 2.4 g/cm3, is a rubble pile and requires a cohesive strength of at least 44 Pa to 74 Pa to keep from failing due to its fast spin period. Since their technique for giving failure conditions required the averaged stress over the whole volume, it discarded information about the aste…
▽ More
Rozitis et al. recently reported that near-Earth asteroid (29075) 1950 DA, whose bulk density ranges from 1.0 g/cm3 to 2.4 g/cm3, is a rubble pile and requires a cohesive strength of at least 44 Pa to 74 Pa to keep from failing due to its fast spin period. Since their technique for giving failure conditions required the averaged stress over the whole volume, it discarded information about the asteroid's failure mode and internal stress condition. This paper develops a finite element model and revisits the stress and failure analysis of 1950 DA. For the modeling, we do not consider material-hardening and softening. Under the assumption of an associated flow rule and uniform material distribution, we identify the deformation process of 1950 DA when its constant cohesion reaches the lowest value that keeps its current shape. The results show that to avoid structural failure the internal core requires a cohesive strength of at least 75 Pa - 85 Pa. It suggests that for the failure mode of this body, the internal core first fails structurally, followed by the surface region. This implies that if cohesion is constant over the whole volume, the equatorial ridge of 1950 DA results from a material flow going outward along the equatorial plane in the internal core, but not from a landslide as has been hypothesized. This has additional implications for the likely density of the interior of the body.
△ Less
Submitted 21 November, 2014;
originally announced November 2014.
-
Constraints on the Physical Properties of Main Belt Comet P/2013 R3 from its Breakup Event
Authors:
Masatoshi Hirabayashi,
Daniel J. Scheeres,
Paul Sánchez,
Travis Gabriel
Abstract:
Jewitt et al. (2014) recently reported that main belt comet P/2013 R3 experienced a breakup, probably due to rotational disruption, with its components separating on mutually hyperbolic orbits. We propose a technique for constraining physical properties of the proto-body, especially the initial spin period and cohesive strength, as a function of the body's estimated size and density. The breakup c…
▽ More
Jewitt et al. (2014) recently reported that main belt comet P/2013 R3 experienced a breakup, probably due to rotational disruption, with its components separating on mutually hyperbolic orbits. We propose a technique for constraining physical properties of the proto-body, especially the initial spin period and cohesive strength, as a function of the body's estimated size and density. The breakup conditions are developed by combining mutual orbit dynamics of the smaller components and the failure condition of the proto-body. Given a proto-body with a bulk density ranging from 1000 kg/m3 to 1500 kg/m3 (a typical range of the bulk density of C-type asteroids), we obtain possible values of the cohesive strength (40 - 210 Pa) and the initial spin state (0.48 - 1.9 hr). From this result, we conclude that although the proto-body could have been a rubble pile, it was likely spinning beyond its gravitational binding limit and would have needed cohesive strength to hold itself together. Additional observations of P/2013 R3 will enable stronger constraints on this event, and the present technique will be able to give more precise estimates of its internal structure.
△ Less
Submitted 3 June, 2014;
originally announced June 2014.
-
Structural failure of two-density-layer cohesionless biaxial ellipsoids
Authors:
Masatoshi Hirabayashi
Abstract:
This paper quantitatively evaluates structural failure of biaxial cohesionless ellipsoids that have a two-density-layer distribution. The internal density layer is modeled as a sphere, while the external density layer is the rest of the part. The density is supposed to be constant in each layer. The present study derives averaged stresses over the whole volume of these bodies and uses limit analys…
▽ More
This paper quantitatively evaluates structural failure of biaxial cohesionless ellipsoids that have a two-density-layer distribution. The internal density layer is modeled as a sphere, while the external density layer is the rest of the part. The density is supposed to be constant in each layer. The present study derives averaged stresses over the whole volume of these bodies and uses limit analysis to determine their global failure. The upper bound condition of global failure is considered in terms of the size of the internal layer and the aspect ratio of the shape. The result shows that the two-density-layer causes the body to have different strength against structural failure.
△ Less
Submitted 24 February, 2014;
originally announced February 2014.
-
Analysis of Asteroid (216) Kleopatra using dynamical and structural constraints
Authors:
Masatoshi Hirabayashi,
Daniel J. Scheeres
Abstract:
Given the spin state by Magnusson (1990), the shape model by Ostro et al. (2000), and the mass by Descamps et al. (2011), this paper evaluates a dynamically and structurally stable size of Asteroid (216) Kleopatra. In particular, we investigate two different failure modes: material shedding from the surface and structural failure of the internal body. We construct zero-velocity curves in the vicin…
▽ More
Given the spin state by Magnusson (1990), the shape model by Ostro et al. (2000), and the mass by Descamps et al. (2011), this paper evaluates a dynamically and structurally stable size of Asteroid (216) Kleopatra. In particular, we investigate two different failure modes: material shedding from the surface and structural failure of the internal body. We construct zero-velocity curves in the vicinity of this asteroid to determine surface shedding, while we utilize a limit analysis to calculate the lower and upper bounds of structural failure under the zero-cohesion assumption. Surface shedding does not occur at the current spin period (5.385 hr) and cannot directly initiate the formation of the satellites. On the other hand, this body may be close to structural failure; in particular, the neck may be situated near a plastic state. In addition, the neck's sensitivity to structural failure changes as the body size varies. We conclude that plastic deformation has probably occurred around the neck part in the past. If the true size of this body is established through additional measurements, this method will provide strong constraints on the current friction angle for the body.
△ Less
Submitted 17 December, 2013;
originally announced December 2013.
-
Flight Performance of the AKARI Cryogenic System
Authors:
Takao Nakagawa,
Keigo Enya,
Masayuki Hirabayashi,
Hidehiro Kaneda,
Tsuneo Kii,
Yoshiyuki Kimura,
Toshio Matsumoto,
Hiroshi Murakami,
Masahide Murakami,
Katsuhiro Narasaki,
Masanao Narita,
Akira Ohnishi,
Shoji Tsunematsu,
Seiji Yoshida
Abstract:
We describe the flight performance of the cryogenic system of the infrared astronomical satellite AKARI, which was successfully launched on 2006 February 21 (UT). AKARI carries a 68.5 cm telescope together with two focal plane instruments, Infrared Cameras (IRC) and Far Infrared Surveyor (FIS), all of which are cooled down to cryogenic temperature to achieve superior sensitivity. The AKARI cryog…
▽ More
We describe the flight performance of the cryogenic system of the infrared astronomical satellite AKARI, which was successfully launched on 2006 February 21 (UT). AKARI carries a 68.5 cm telescope together with two focal plane instruments, Infrared Cameras (IRC) and Far Infrared Surveyor (FIS), all of which are cooled down to cryogenic temperature to achieve superior sensitivity. The AKARI cryogenic system is a unique hybrid system, which consists of cryogen (liquid helium) and mechanical coolers (2-stage Stirling coolers). With the help of the mechanical coolers, 179 L (26.0 kg) of super-fluid liquid helium can keep the instruments cryogenically cooled for more than 500 days. The on-orbit performance of the AKARI cryogenics is consistent with the design and pre-flight test, and the boil-off gas flow rate is as small as 0.32 mg/s. We observed the increase of the major axis of the AKARI orbit, which can be explained by the thrust due to thermal pressure of vented helium gas.
△ Less
Submitted 14 August, 2007;
originally announced August 2007.
-
High Precision CTE-Measurement of SiC-100 for Cryogenic Space-Telescopes
Authors:
K. Enya,
N. Yamada,
T. Onaka,
T. Nakagawa,
H. Kaneda,
M. Hirabayashi,
Y. Toulemont,
D. Castel,
Y. Kanai,
N. Fujishiro
Abstract:
We present the results of high precision measurements of the thermal expansion of the sintered SiC, SiC-100, intended for use in cryogenic space-telescopes, in which minimization of thermal deformation of the mirror is critical and precise information of the thermal expansion is needed for the telescope design. The temperature range of the measurements extends from room temperature down to…
▽ More
We present the results of high precision measurements of the thermal expansion of the sintered SiC, SiC-100, intended for use in cryogenic space-telescopes, in which minimization of thermal deformation of the mirror is critical and precise information of the thermal expansion is needed for the telescope design. The temperature range of the measurements extends from room temperature down to $\sim$ 10 K. Three samples, #1, #2, and #3 were manufactured from blocks of SiC produced in different lots. The thermal expansion of the samples was measured with a cryogenic dilatometer, consisting of a laser interferometer, a cryostat, and a mechanical cooler. The typical thermal expansion curve is presented using the 8th order polynomial of the temperature. For the three samples, the coefficients of thermal expansion (CTE), $\barα_{#1}$, $\barα_{#2}$, and $\barα_{#3}$ were derived for temperatures between 293 K and 10 K. The average and the dispersion (1 $σ$ rms) of these three CTEs are 0.816 and 0.002 ($\times 10^{-6}$/K), respectively. No significant difference was detected in the CTE of the three samples from the different lots. Neither inhomogeneity nor anisotropy of the CTE was observed. Based on the obtained CTE dispersion, we performed an finite-element-method (FEM) analysis of the thermal deformation of a 3.5 m diameter cryogenic mirror made of six SiC-100 segments. It was shown that the present CTE measurement has a sufficient accuracy well enough for the design of the 3.5 m cryogenic infrared telescope mission, the Space Infrared telescope for Cosmology and Astrophysics (SPICA).
△ Less
Submitted 11 April, 2007;
originally announced April 2007.