-
Wavefront sensing with a Gradient Phase Filter
Authors:
F. Henault,
Y. Feng,
J. -J. Correia,
L. Schreiber,
A. Spang
Abstract:
Wavefront sensors have now become core components in the fields of metrology of optical systems, biomedical optics, and adaptive optics systems for astronomy. However, none of the designs used or proposed so far achieve simultaneously a high spatial resolution at the pupil of the tested optics and absolute measurement accuracy comparable to those of modern laser-interferometers. This paper present…
▽ More
Wavefront sensors have now become core components in the fields of metrology of optical systems, biomedical optics, and adaptive optics systems for astronomy. However, none of the designs used or proposed so far achieve simultaneously a high spatial resolution at the pupil of the tested optics and absolute measurement accuracy comparable to those of modern laser-interferometers. This paper presents an improved wavefront sensor concept that reaches both previous goals. This device named Crossed-sine phase sensor (CSPS) is based on a fully transparent gradient phase filter (GPF) placed at an intermediate location between the virtual pupil and image planes of the tested optics. The theoretical principle of the sensor is described in Fourier optics formalism. Numerical simulations confirm that a measurement accuracy of Lambda/100 RMS is achievable. The CSPS also offers the advantages of being quasi-achromatic and working on spatially or spectrally extended, natural or artificial light sources
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
Remote Measurement of Heliostat Reflectivity with the Backward Gazing Procedure
Authors:
Francois Henault
Abstract:
Concentrated solar power is a promising technique enabling renewable energy production with large scale solar power plants in the near future. Estimating quantitatively the reflectivity of a solar concentrator is a major issue, since it has a significant impact on the flux distribution formed on the solar receiver. Moreover, it is desirable that the mirrors can be measured during operation in orde…
▽ More
Concentrated solar power is a promising technique enabling renewable energy production with large scale solar power plants in the near future. Estimating quantitatively the reflectivity of a solar concentrator is a major issue, since it has a significant impact on the flux distribution formed on the solar receiver. Moreover, it is desirable that the mirrors can be measured during operation in order to evaluate environmental factors such as day night thermal cycles or soiling and ageing effects at the reflective surfaces. For that purpose, we used a backward gazing method that was originally developed to measure mirror shape and misalignment errors. The method operates in quasi real-time without disturbing the heat production process. It was successfully tested at a solar tower power plant in France. Its basic principle consists in acquiring four simultaneous images of a Sun-tracking heliostat, captured from different observation points located near the thermal receiver. The images are then processed with a minimization algorithm allowing the determination of mirror slopes errors. In this communication, it is shown that the algorithm also allows one to get quantitative reflectivity maps at the surface of the heliostat. The measurement is fully remote and is used to evaluate surface reflectivity that depends on optical coatings quality and soiling. Preliminary results obtained with a Themis heliostat are presented. They show that reflectivity measurements can be carried out within repeatability about 10 percent Peak-to-Valley (PTV) and 1 percent RMS. Ways to improving these numbers are discussed in the paper
△ Less
Submitted 11 August, 2023;
originally announced August 2023.
-
The crossed-sine wavefront sensor: first tests and results
Authors:
Laura Schreiber,
Yan Feng,
Alain Spang,
Francois Henault,
Jean-Jacques Correia,
Eric Stadler,
David Mouillet
Abstract:
The crossed-sine wavefront sensor (WFS) is a pupil plane wavefront sensor that measures the first derivatives of the wavefront. It is made by three main components: a gradient transmission filter (GTF) built from a product of sine functions rotated by 45 degrees around the optical axis, a 2x2 mini-lens array (MLA) at the focus of the tested optical system and a detector array located on a plane co…
▽ More
The crossed-sine wavefront sensor (WFS) is a pupil plane wavefront sensor that measures the first derivatives of the wavefront. It is made by three main components: a gradient transmission filter (GTF) built from a product of sine functions rotated by 45 degrees around the optical axis, a 2x2 mini-lens array (MLA) at the focus of the tested optical system and a detector array located on a plane conjugated to the pupil. The basic principle consists in acquiring four pupil images simultaneously, each image being observed from different points located behind the GTF. After the simulation work which demonstrated the wavefront reconstruction capability, we are now in the phase of implementation of the prototype in the lab. The crossed-sine WFS could achieve a simultaneous high spatial resolution at the pupil of the tested optics and absolute measurement accuracy comparable to that attained by laser-interferometers. In this paper we introduce seven customized phase masks and make measurements of them.First tests and resultsare demonstrated, based on which we explore the performance of our crossed-sine WFS and make comparisons with that of the laser-interferomete
△ Less
Submitted 2 September, 2022;
originally announced September 2022.
-
Lord of the Ring Gratings: Their use as image plane filters for coronagraphy
Authors:
Francçois Henault
Abstract:
Coronagraphy is an efficient technique for identifying and characterizing extra-solar planets orbiting in the habitable zone of their parent star. An important family of coronagraphs is based on amplitude or phase filters placed at an intermediate image plane of the optical system, spreading starlight outside of the so-called Lyot stop located at the exit pupil plane of the instrument. This articl…
▽ More
Coronagraphy is an efficient technique for identifying and characterizing extra-solar planets orbiting in the habitable zone of their parent star. An important family of coronagraphs is based on amplitude or phase filters placed at an intermediate image plane of the optical system, spreading starlight outside of the so-called Lyot stop located at the exit pupil plane of the instrument. This article explores the potential of circular amplitude and phase gratings employed as image plane coronagraph filters. It presents a theoretical analysis of the simplest case of an amplitude circular grating and introduces an inversion paradigm with respect to classical Lyot coronagraph, by exchanging its image and pupil masks. Various types of circular gratings are considered and their performance is evaluated with the help of numerical simulations. The most promising solutions are presented. We conclude that high attenuation ratios of the starlight are feasible, provided that the system has been carefully optimized
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
Nulling interferometry in space does not require a rotating telescope array
Authors:
Francois Henault
Abstract:
Space borne nulling interferometry in the mid-infrared waveband is one of the most promising techniques for characterizing the atmospheres of extra-solar planets orbiting in the habitable zone of their parent star, and possibly discovering life markers. One of its most difficult challenges is the control of free-flying telescope spacecrafts moving around a central combiner in order to modulating t…
▽ More
Space borne nulling interferometry in the mid-infrared waveband is one of the most promising techniques for characterizing the atmospheres of extra-solar planets orbiting in the habitable zone of their parent star, and possibly discovering life markers. One of its most difficult challenges is the control of free-flying telescope spacecrafts moving around a central combiner in order to modulating the planet signal, within accuracy better than one micrometer at least. Moreover, the whole array must be reconfigured regularly in order to observe different celestial targets, thus increasing the risk of loosing one or more spacecrafts and aborting the mission before its normal end. In this paper is described a simplified optical configuration where the telescopes do not need to be rotated, and the number of necessary array reconfigurations is minimized. It allows efficient modulation of the planet signal, only making use of rotating prisms or mirrors located into the central combiner. In this paper the general principle of a nulling interferometer with a fixed telescope array is explained. Mathematical relations are established in order to determining the planet modulation signal. Numerical simulations are carried out for three different arrangements of the collecting telescopes. They confirm that nulling interferometry in space does not require a rotating telescope array
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
Field of View and contrast limitations of stellar interferometers. A quick review
Authors:
Francois Henault
Abstract:
Field of View (FoV) and contrast limitations of stellar interferometers have been the scope of numerous publications for more than thirty years. Recently, this topic regained some interest since long-baseline terrestrial interferometers or space borne nulling interferometers are envisioned for detecting and characterizing extra-solar planets orbiting in the habitable zone of their parent star. Thi…
▽ More
Field of View (FoV) and contrast limitations of stellar interferometers have been the scope of numerous publications for more than thirty years. Recently, this topic regained some interest since long-baseline terrestrial interferometers or space borne nulling interferometers are envisioned for detecting and characterizing extra-solar planets orbiting in the habitable zone of their parent star. This goal supposes to achieving sufficient contrast ratio in the high angular frequency domain, thus on the whole interferometer FoV. In this paper are reviewed some of the contrast and FoV limiting factors, including spectral bandwidth, flux mismatches, fringe tracking, telescope image quality, atmosphere seeing, optical conjugation mismatch of the telescopes pupils, influence of anamorphous optics, pupil aberrations, signal-to-noise ratio and deviations with respect to the golden rule of imaging interferometers. Finally, a tentative classification of all these factors is provided.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
MAORY: A Multi-conjugate Adaptive Optics RelaY for ELT
Authors:
Paolo Ciliegi,
Guido Agapito,
Matteo Aliverti,
Francesca Annibali,
Carmelo Arcidiacono,
Andrea Balestra,
Andrea Baruffolo,
Maria Bergomi,
Andrea Bianco,
Marco Bonaglia,
Lorenzo Busoni,
Michele Cantiello,
Enrico Cascone,
Gael Chauvin,
Simonetta Chinellato,
Vincenzo Cianniello,
Jean Jacques Correira,
Giuseppe Cosentino,
Massimo Dall'Ora,
Vincenzo De Caprio,
Nicholas Devaney,
Ivan Di Antonio,
Amico Di Cianno,
Ugo Di Giammatteo,
Valentina D'Orazi
, et al. (51 additional authors not shown)
Abstract:
MAORY is the adaptive optics module for ELT providing two gravity invariant ports with the same optical quality for two different client instruments. It enable high angular resolution observations in the near infrared over a large field of view (~1 arcmin2 ) by real time compensation of the wavefront distortions due to atmospheric turbulence. Wavefront sensing is performed by laser and natural gui…
▽ More
MAORY is the adaptive optics module for ELT providing two gravity invariant ports with the same optical quality for two different client instruments. It enable high angular resolution observations in the near infrared over a large field of view (~1 arcmin2 ) by real time compensation of the wavefront distortions due to atmospheric turbulence. Wavefront sensing is performed by laser and natural guide stars while the wavefront sensor compensation is performed by an adaptive deformable mirror in MAORY which works together with the telescope's adaptive and tip tilt mirrors M4 and M5 respectively.
△ Less
Submitted 20 March, 2021;
originally announced March 2021.
-
SPIRou: nIR velocimetry & spectropolarimetry at the CFHT
Authors:
J. -F. Donati,
D. Kouach,
C. Moutou,
R. Doyon,
X. Delfosse,
E. Artigau,
S. Baratchart,
M. Lacombe,
G. Barrick,
G. Hebrard,
F. Bouchy,
L. Saddlemyer,
L. Pares,
P. Rabou,
Y. Micheau,
F. Dolon,
V. Reshetov,
Z. Challita,
A. Carmona,
N. Striebig,
S. Thibault,
E. Martioli,
N. Cook,
P. Fouque,
T. Vermeulen
, et al. (41 additional authors not shown)
Abstract:
This paper presents an overview of SPIRou, the new-generation near-infrared spectropolarimeter / precision velocimeter recently installed on the 3.6-m Canada-France-Hawaii Telescope (CFHT). Starting from the two main science goals, namely the quest for planetary systems around nearby M dwarfs and the study of magnetized star / planet formation, we outline the instrument concept that was designed t…
▽ More
This paper presents an overview of SPIRou, the new-generation near-infrared spectropolarimeter / precision velocimeter recently installed on the 3.6-m Canada-France-Hawaii Telescope (CFHT). Starting from the two main science goals, namely the quest for planetary systems around nearby M dwarfs and the study of magnetized star / planet formation, we outline the instrument concept that was designed to efficiently address these forefront topics, and detail the in-lab and on-sky instrument performances measured throughout the intensive testing phase that SPIRou was submitted to before passing the final acceptance review in early 2019 and initiating science observations. With a central position among the newly started programmes, the SPIRou Legacy Survey (SLS) Large Programme was allocated 300 CFHT nights until at least mid 2022. We also briefly describe a few of the first results obtained in the various science topics that SPIRou started investigating, focusing in particular on planetary systems of nearby M dwarfs, transiting exoplanets and their atmospheres, magnetic fields of young stars, but also on alternate science goals like the atmospheres of M dwarfs and the Earth's atmosphere. We finally conclude on the essential role that SPIRou and the CFHT can play in coordination with forthcoming major facilities like the JWST, the ELTs, PLATO and ARIEL over the decade.
△ Less
Submitted 20 August, 2020;
originally announced August 2020.
-
New concepts for calibrating non-common path aberrations in adaptive optics and coronagraph systems
Authors:
Francois Henault
Abstract:
Non Common Path Aberrations (NCPA) are often considered as a critical issue in Adaptive Optics (AO) systems, since they introduce bias errors between real wavefronts propagating to the science detectors and those measured by the Wavefront Sensor (WFS). This is especially true when the AO system is coupled to a coronagraph instrument intended for the discovery and characterization of extra-solar pl…
▽ More
Non Common Path Aberrations (NCPA) are often considered as a critical issue in Adaptive Optics (AO) systems, since they introduce bias errors between real wavefronts propagating to the science detectors and those measured by the Wavefront Sensor (WFS). This is especially true when the AO system is coupled to a coronagraph instrument intended for the discovery and characterization of extra-solar planets, because useful planet signals could be mistaken with residual speckles generated by NCPA. Therefore, compensating for those errors is of prime importance and is already the scope of a few theoretical studies and experimental validations on-sky. This communication presents the conceptual optical design of a pseudo-interferometer arrangement suitable to accurate NCPA calibration, based on two WFS cooperating in real-time. The concept is applicable to both classical imaging and spectroscopy assisted by AO, and to high-contrast coronagraphs searching for habitable extra-solar planets. Practical aspects are discussed, such as the choice of WFS and coronagraph types, or specific requirements on additional hardware components, e.g. dichroic beamsplitters
△ Less
Submitted 11 September, 2019;
originally announced September 2019.
-
Hartmann vs. reverse Hartmann test: a Fourier optics point of view
Authors:
Francois Henault,
Cyril Pannetier
Abstract:
The Shack-Hartmann Wavefront Sensor (WFS) is well-known in the fields of optical metrology, wavefront sensing in astronomy, and ophthalmologic control applications. The purpose of this communication is to bring new insights on the historical Hartmann test and to compare it with the less known reverse Hartmann test, where the locations of the pupil mask and observed image planes are exchanged. Both…
▽ More
The Shack-Hartmann Wavefront Sensor (WFS) is well-known in the fields of optical metrology, wavefront sensing in astronomy, and ophthalmologic control applications. The purpose of this communication is to bring new insights on the historical Hartmann test and to compare it with the less known reverse Hartmann test, where the locations of the pupil mask and observed image planes are exchanged. Both tests can actually be interpreted by using the formalism of Fourier optics, i.e. Fraunhofer diffraction for the Shack-Hartmann and Fresnel diffraction in the reverse configuration. The principles of these models are firstly described in the communication. The results of numerical simulations are then presented, allowing comparing both optical arrangements from the Fourier optics point of view, in terms of achievable wavefront measurement accuracy. They show that a WFS based on the reverse Hartmann test may globally achieve the same performance as the classical Shack-Hartmann
△ Less
Submitted 11 September, 2019;
originally announced September 2019.
-
Hi-5: a potential high-contrast thermal near-infrared imager for the VLTI
Authors:
D. Defrère,
M. Ireland,
O. Absil,
J. -P. Berger,
W. C. Danchi,
S. Ertel,
A. Gallenne,
F. Hénault,
P. Hinz,
E. Huby,
S. Kraus,
L. Labadie,
J. -B. Le Bouquin,
G. Martin,
A. Matter,
B. Mennesson,
A. Mérand,
S. Minardi,
J. D. Monnier,
B. Norris,
G. Orban de Xivry,
E. Pedretti,
J. -U. Pott,
M. Reggiani,
E. Serabyn
, et al. (3 additional authors not shown)
Abstract:
Hi-5 is a high-contrast (or high dynamic range) infrared imager project for the VLTI. Its main goal is to characterize young extra-solar planetary systems and exozodiacal dust around southern main-sequence stars. In this paper, we present an update of the project and key technology pathways to improve the contrast achieved by the VLTI. In particular, we discuss the possibility to use integrated op…
▽ More
Hi-5 is a high-contrast (or high dynamic range) infrared imager project for the VLTI. Its main goal is to characterize young extra-solar planetary systems and exozodiacal dust around southern main-sequence stars. In this paper, we present an update of the project and key technology pathways to improve the contrast achieved by the VLTI. In particular, we discuss the possibility to use integrated optics, proven in the near-infrared, in the thermal near-infrared (L and M bands, 3-5~$μ$m) and advanced fringe tracking strategies. We also address the strong exoplanet science case (young exoplanets, planet formation, and exozodiacal disks) offered by this wavelength regime as well as other possible science cases such as stellar physics (fundamental parameters and multiplicity) and extragalactic astrophysics (active galactic nuclei and fundamental constants). Synergies and scientific preparation for other potential future instruments such as the Planet Formation Imager are also briefly discussed.
△ Less
Submitted 19 July, 2018;
originally announced July 2018.
-
Analysis of azimuthal phase mask coronagraphs
Authors:
Francois Henault
Abstract:
In this paper is presented an analytical study of the azimuthal phase-mask coronagraph currently envisioned for detecting and characterizing extra-solar planets. Special emphasis is put on the physical and geometrical interpretation of the mathematical development. Two necessary conditions are defined for achieving full extinction in the pupil plane of the coronagraph, stating that the complex amp…
▽ More
In this paper is presented an analytical study of the azimuthal phase-mask coronagraph currently envisioned for detecting and characterizing extra-solar planets. Special emphasis is put on the physical and geometrical interpretation of the mathematical development. Two necessary conditions are defined for achieving full extinction in the pupil plane of the coronagraph, stating that the complex amplitude generated by the phase mask should have zero average, on the one hand, and its Fourier coefficients should only be even, on the other hand. Examples of such phase functions are reviewed, including optical vortices, four-quadrant phase masks, and azimuthal cosine phase functions. Hints for building more sophisticated functions are also given. Finally, a simplified expression of light leaks due to mask imperfection is proposed
△ Less
Submitted 30 May, 2018;
originally announced May 2018.
-
The path towards high-contrast imaging with the VLTI: the Hi-5 project
Authors:
D. Defrère,
O. Absil,
J. -P. Berger,
T. Boulet,
W. C. Danchi,
S. Ertel,
A. Gallenne,
F. Hénault,
P. Hinz,
E. Huby,
M. Ireland,
S. Kraus,
L. Labadie,
J. -B. Le Bouquin,
G. Martin,
A. Matter,
A. Mérand,
B. Mennesson,
S. Minardi,
J. Monnier,
B. Norris,
G. Orban de Xivry,
E. Pedretti,
J. -U. Pott,
M. Reggiani
, et al. (4 additional authors not shown)
Abstract:
The development of high-contrast capabilities has long been recognized as one of the top priorities for the VLTI. As of today, the VLTI routinely achieves contrasts of a few 10$^{-3}$ in the near-infrared with PIONIER (H band) and GRAVITY (K band). Nulling interferometers in the northern hemisphere and non-redundant aperture masking experiments have, however, demonstrated that contrasts of at leas…
▽ More
The development of high-contrast capabilities has long been recognized as one of the top priorities for the VLTI. As of today, the VLTI routinely achieves contrasts of a few 10$^{-3}$ in the near-infrared with PIONIER (H band) and GRAVITY (K band). Nulling interferometers in the northern hemisphere and non-redundant aperture masking experiments have, however, demonstrated that contrasts of at least a few 10$^{-4}$ are within reach using specific beam combination and data acquisition techniques. In this paper, we explore the possibility to reach similar or higher contrasts on the VLTI. After reviewing the state-of-the-art in high-contrast infrared interferometry, we discuss key features that made the success of other high-contrast interferometric instruments (e.g., integrated optics, nulling, closure phase, and statistical data reduction) and address possible avenues to improve the contrast of the VLTI by at least one order of magnitude. In particular, we discuss the possibility to use integrated optics, proven in the near-infrared, in the thermal near-infrared (L and M bands, 3-5 $μ$m), a sweet spot to image and characterize young extra-solar planetary systems. Finally, we address the science cases of a high-contrast VLTI imaging instrument and focus particularly on exoplanet science (young exoplanets, planet formation, and exozodiacal disks), stellar physics (fundamental parameters and multiplicity), and extragalactic astrophysics (active galactic nuclei and fundamental constants). Synergies and scientific preparation for other potential future instruments such as the Planet Formation Imager are also briefly discussed.
△ Less
Submitted 25 May, 2018; v1 submitted 12 January, 2018;
originally announced January 2018.
-
Cherenkov Telescope Array Contributions to the 35th International Cosmic Ray Conference (ICRC2017)
Authors:
F. Acero,
B. S. Acharya,
V. Acín Portella,
C. Adams,
I. Agudo,
F. Aharonian,
I. Al Samarai,
A. Alberdi,
M. Alcubierre,
R. Alfaro,
J. Alfaro,
C. Alispach,
R. Aloisio,
R. Alves Batista,
J. -P. Amans,
E. Amato,
L. Ambrogi,
G. Ambrosi,
M. Ambrosio,
J. Anderson,
M. Anduze,
E. O. Angüner,
E. Antolini,
L. A. Antonelli,
V. Antonuccio
, et al. (1117 additional authors not shown)
Abstract:
List of contributions from the Cherenkov Telescope Array Consortium presented at the 35th International Cosmic Ray Conference, July 12-20 2017, Busan, Korea.
List of contributions from the Cherenkov Telescope Array Consortium presented at the 35th International Cosmic Ray Conference, July 12-20 2017, Busan, Korea.
△ Less
Submitted 24 October, 2017; v1 submitted 11 September, 2017;
originally announced September 2017.
-
Phase-shifting coronagraph
Authors:
François Hénault,
Alexis Carlotti,
Christophe Vérinaud
Abstract:
With the recent commissioning of ground instruments such as SPHERE or GPI and future space observatories like WFIRST-AFTA, coronagraphy should probably become the most efficient tool for identifying and characterizing extra-solar planets in the forthcoming years. Coronagraphic instruments such as Phase mask coronagraphs (PMC) are usually based on a phase mask or plate located at the telescope foca…
▽ More
With the recent commissioning of ground instruments such as SPHERE or GPI and future space observatories like WFIRST-AFTA, coronagraphy should probably become the most efficient tool for identifying and characterizing extra-solar planets in the forthcoming years. Coronagraphic instruments such as Phase mask coronagraphs (PMC) are usually based on a phase mask or plate located at the telescope focal plane, spreading the starlight outside the diameter of a Lyot stop that blocks it. In this communication is investigated the capability of a PMC to act as a phase-shifting wavefront sensor for better control of the achieved star extinction ratio in presence of the coronagraphic mask. We discuss the two main implementations of the phase-shifting process, either introducing phase-shifts in a pupil plane and sensing intensity variations in an image plane, or reciprocally. Conceptual optical designs are described in both cases. Numerical simulations allow for better understanding of the performance and limitations of both options, and optimizing their fundamental parameters. In particular, they demonstrate that the phase-shifting process is a bit more efficient when implemented into an image plane, and is compatible with the most popular phase masks currently employed, i.e. four-quadrants and vortex phase masks.
△ Less
Submitted 8 September, 2017;
originally announced September 2017.
-
Contributions of the Cherenkov Telescope Array (CTA) to the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016)
Authors:
The CTA Consortium,
:,
A. Abchiche,
U. Abeysekara,
Ó. Abril,
F. Acero,
B. S. Acharya,
C. Adams,
G. Agnetta,
F. Aharonian,
A. Akhperjanian,
A. Albert,
M. Alcubierre,
J. Alfaro,
R. Alfaro,
A. J. Allafort,
R. Aloisio,
J. -P. Amans,
E. Amato,
L. Ambrogi,
G. Ambrosi,
M. Ambrosio,
J. Anderson,
M. Anduze,
E. O. Angüner
, et al. (1387 additional authors not shown)
Abstract:
List of contributions from the Cherenkov Telescope Array (CTA) Consortium presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016), July 11-15, 2016, in Heidelberg, Germany.
List of contributions from the Cherenkov Telescope Array (CTA) Consortium presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016), July 11-15, 2016, in Heidelberg, Germany.
△ Less
Submitted 17 October, 2016;
originally announced October 2016.
-
A detector interferometric calibration experiment for high precision astrometry
Authors:
A. Crouzier,
F. Malbet,
F. Henault,
A. Leger,
C. Cara,
J. M. LeDuigou,
O. Preis,
P. Kern,
A. Delboulbe,
G. Martin,
P. Feautrier,
E. Stadler,
S. Lafrasse,
S. Rochat,
C. Ketchazo,
M. Donati,
E. Doumayrou,
P. O. Lagage,
M. Shao,
R. Goullioud,
B. Nemati,
C. Zhai,
E. Behar,
S. Potin,
M. Saint-Pe
, et al. (1 additional authors not shown)
Abstract:
Context: Exoplanet science has made staggering progress in the last two decades, due to the relentless exploration of new detection methods and refinement of existing ones. Yet astrometry offers a unique and untapped potential of discovery of habitable-zone low-mass planets around all the solar-like stars of the solar neighborhood. To fulfill this goal, astrometry must be paired with high precisio…
▽ More
Context: Exoplanet science has made staggering progress in the last two decades, due to the relentless exploration of new detection methods and refinement of existing ones. Yet astrometry offers a unique and untapped potential of discovery of habitable-zone low-mass planets around all the solar-like stars of the solar neighborhood. To fulfill this goal, astrometry must be paired with high precision calibration of the detector.
Aims: We present a way to calibrate a detector for high accuracy astrometry. An experimental testbed combining an astrometric simulator and an interferometric calibration system is used to validate both the hardware needed for the calibration and the signal processing methods. The objective is an accuracy of 5e-6 pixel on the location of a Nyquist sampled polychromatic point spread function.
Methods: The interferometric calibration system produced modulated Young fringes on the detector. The Young fringes were parametrized as products of time and space dependent functions, based on various pixel parameters. The minimization of func- tion parameters was done iteratively, until convergence was obtained, revealing the pixel information needed for the calibration of astrometric measurements.
Results: The calibration system yielded the pixel positions to an accuracy estimated at 4e-4 pixel. After including the pixel position information, an astrometric accuracy of 6e-5 pixel was obtained, for a PSF motion over more than five pixels. In the static mode (small jitter motion of less than 1e-3 pixel), a photon noise limited precision of 3e-5 pixel was reached.
△ Less
Submitted 8 September, 2016;
originally announced September 2016.
-
The latest results from DICE (Detector Interferometric Calibration Experiment)
Authors:
A. Crouzier,
F. Malbet,
F. Henault,
A. Leger,
C. Cara,
J. M. LeDuigou,
O. Preis,
P. Kern,
A. Delboulbe,
G. Martin,
P. Feautrier,
E. Stadler,
S. Lafrasse,
S. Rochat,
C. Ketchazo,
M. Donati,
E. Doumayrou,
P. O. Lagage,
M. Shao,
R. Goullioud,
B. Nemati,
C. Zhai,
E. Behar,
S. Potin,
M. Saint-Pe
, et al. (1 additional authors not shown)
Abstract:
Theia is an astrometric mission proposed to ESA in 2014 for which one of the scientific objectives is detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. This objective requires the capability to measure stellar centroids at the precision of 1e-5 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 3e-5 pixel at two times N…
▽ More
Theia is an astrometric mission proposed to ESA in 2014 for which one of the scientific objectives is detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. This objective requires the capability to measure stellar centroids at the precision of 1e-5 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 3e-5 pixel at two times Nyquist sampling, this was shown at the JPL by the VESTA experiment. A metrology system was used to calibrate intra and inter pixel quantum efficiency variations in order to correct pixelation errors. The Theia consortium is operating a testbed in vacuum in order to achieve 1e-5 pixel precision for the centroid estimation. The goal is to provide a proof of concept for the precision requirement of the Theia spacecraft.
The testbed consists of two main sub-systems. The first one produces pseudo stars: a blackbody source is fed into a large core fiber and lights-up a pinhole mask in the object plane, which is imaged by a mirror on the CCD. The second sub-system is the metrology, it projects young fringes on the CCD. The fringes are created by two single mode fibers facing the CCD and fixed on the mirror. In this paper we present the latest experiments conducted and the results obtained after a series of upgrades on the testbed was completed. The calibration system yielded the pixel positions to an accuracy estimated at 4e-4 pixel. After including the pixel position information, an astrometric accuracy of 6e-5 pixel was obtained, for a PSF motion over more than 5 pixels. In the static mode (small jitter motion of less than 1e-3 pixel), a photon noise limited precision of 3e-5 pixel was reached.
△ Less
Submitted 1 August, 2016;
originally announced August 2016.
-
Collimating Slicer for Optical Integral Field Spectroscopy
Authors:
Florence Laurent,
Francois Henault
Abstract:
Integral Field Spectroscopy (IFS) is a technique that gives simultaneously the spectrum of each spatial sampling element in a given object field. It is a powerful tool which rearranges the data cube (x, y, lambda) represented by two spatial dimensions defining the field and the spectral decomposition in a detector plane. In IFS, the spatial unit reorganizes the field and the spectral unit is being…
▽ More
Integral Field Spectroscopy (IFS) is a technique that gives simultaneously the spectrum of each spatial sampling element in a given object field. It is a powerful tool which rearranges the data cube (x, y, lambda) represented by two spatial dimensions defining the field and the spectral decomposition in a detector plane. In IFS, the spatial unit reorganizes the field and the spectral unit is being composed of a classical spectrograph.The development of a Collimating Slicer aims at proposing a new type of integral field spectrograph which should be more compact. The main idea is to combine the image slicer with the collimator of the spectrograph, thus mixing the spatial and spectral units. The traditional combination of slicer, pupil and slit elements and the spectrograph collimator is replaced by a new one composed of a slicer and collimator only. In this paper, the state of the art of integral field spectroscopy using image slicers is described. The new system based onto the development of a Collimating Slicer for optical integral field spectroscopy is depicted. First system analysis results and future improvements are discussed. It finally turns out that this new system looks very promising for low resolution spectroscopy.
△ Less
Submitted 25 July, 2016;
originally announced July 2016.
-
Optical design of a multi-resolution, single shot spectrograph
Authors:
Francois Henault,
Florence Laurent
Abstract:
Multi-object or integral field spectrographs are recognized techniques for achieving simultaneous spectroscopic observations of different or extended sky objects with a high multiplex factor. In this communication is described a complementary approach for realizing similar measurements under different spectral resolutions at the same time. We describe the basic principle of this new type of spectr…
▽ More
Multi-object or integral field spectrographs are recognized techniques for achieving simultaneous spectroscopic observations of different or extended sky objects with a high multiplex factor. In this communication is described a complementary approach for realizing similar measurements under different spectral resolutions at the same time. We describe the basic principle of this new type of spectrometer, that is based on the utilization of an optical pupil slicer. An optical design inspired from an already studied instrument is then presented and commented for the sake of illustration. Technical issues about the pupil slicer and diffractive components are also discussed. We finally conclude on the potential advantages and drawbacks of the proposed system.
△ Less
Submitted 6 July, 2016;
originally announced July 2016.
-
Experimental demonstration of a crossed cubes nuller for coronagraphy and interferometry
Authors:
Francois Henault,
Brahim Arezki,
Guillaume Bourdarot,
Alain Spang
Abstract:
In this communication we present the first experimental results obtained on the Crossed-cubes nuller (CCN), that is a new type of Achromatic phase shifter (APS) based on a pair of crossed beamsplitter cubes. We review the general principle of the CCN, now restricted to two interferometric outputs for achieving better performance, and describe the experimental apparatus developed in our laboratory.…
▽ More
In this communication we present the first experimental results obtained on the Crossed-cubes nuller (CCN), that is a new type of Achromatic phase shifter (APS) based on a pair of crossed beamsplitter cubes. We review the general principle of the CCN, now restricted to two interferometric outputs for achieving better performance, and describe the experimental apparatus developed in our laboratory. It is cheap, compact, and easy to align. The results demonstrate a high extinction rate in monochromatic light and confirm that the device is insensitive to its polarization state. Finally, the first lessons from the experiment are summarized and discussed in view of future space missions searching for extra-solar planets located in the habitable zone, either based on a coronagraphic telescope or a sparse-aperture nulling interferometer
△ Less
Submitted 6 July, 2016;
originally announced July 2016.
-
Analysis of nulling phase functions suitable to image plane coronagraphy
Authors:
Francois Henault,
Alexis Carlotti,
Christophe Verinaud
Abstract:
Coronagraphy is a very efficient technique for identifying and characterizing extra-solar planets orbiting in the habitable zone of their parent star, especially when used in a space environment. An important family of coronagraphs is based on phase plates located at an intermediate image plane of the optical system, that spread the starlight outside the "Lyot" exit pupil plane of the instrument.…
▽ More
Coronagraphy is a very efficient technique for identifying and characterizing extra-solar planets orbiting in the habitable zone of their parent star, especially when used in a space environment. An important family of coronagraphs is based on phase plates located at an intermediate image plane of the optical system, that spread the starlight outside the "Lyot" exit pupil plane of the instrument. In this communication we present a set of candidate phase functions generating a central null at the Lyot plane, and study how it propagates to the image plane of the coronagraph. These functions include linear azimuthal phase ramps (the well-known optical vortex), azimuthally cosine-modulated phase profiles, and circular phase gratings. Numerical simulations of the expected null depth, inner working angle, sensitivity to pointing errors, effect of central obscuration located at the pupil or image planes, and effective throughput including image mask and Lyot stop transmissions are presented and discussed. The preliminary conclusion is that azimuthal cosine functions appear as an interesting alternative to the classical optical vortex of integer topological charge.
△ Less
Submitted 6 July, 2016;
originally announced July 2016.
-
Fully achromatic nulling interferometer (FANI) for high SNR exoplanet characterization
Authors:
Francois Henault
Abstract:
Space-borne nulling interferometers have long been considered as the best option for searching and characterizing extra-solar planets located in the habitable zone of their parent stars. Solutions for achieving deep starlight extinction are now numerous and well demonstrated. However they essentially aim at realizing an achromatic central null in order to extinguish the star. In this communication…
▽ More
Space-borne nulling interferometers have long been considered as the best option for searching and characterizing extra-solar planets located in the habitable zone of their parent stars. Solutions for achieving deep starlight extinction are now numerous and well demonstrated. However they essentially aim at realizing an achromatic central null in order to extinguish the star. In this communication is described a major improvement of the technique, where the achromatization process is extended to the entire fringe pattern. Therefore higher Signal-to-noise ratios (SNR) and appreciable simplification of the detection system should result. The basic principle of this Fully achromatic nulling interferometer (FANI) consists in inserting dispersive elements along the arms of the interferometer. Herein this principle is explained and illustrated by a preliminary optical system design. The typical achievable performance and limitations are discussed and some initial tolerance requirements are also provided
△ Less
Submitted 29 August, 2015;
originally announced August 2015.
-
NectarCAM : a camera for the medium size telescopes of the Cherenkov Telescope Array
Authors:
J-F. Glicenstein,
O. Abril,
J-A. Barrio,
O. Blanch~Bigas,
J. Bolmont,
F. Bouyjou,
P. Brun,
E. Chabanne,
C. Champion,
S. Colonges,
P. Corona,
E. Delagnes,
C. Delgado,
C. Diaz Ginzov,
D. Durand,
J-P. Ernenwein,
S. Fegan,
O. Ferreira,
M. Fesquet,
A. Fiasson,
G. Fontaine,
N. Fouque,
D. Gascon,
B. Giebels,
F. Henault
, et al. (41 additional authors not shown)
Abstract:
NectarCAM is a camera proposed for the medium-sized telescopes of the Cherenkov Telescope Array (CTA) covering the central energy range of ~100 GeV to ~30 TeV. It has a modular design and is based on the NECTAr chip, at the heart of which is a GHz sampling Switched Capacitor Array and a 12-bit Analog to Digital converter. The camera will be equipped with 265 7-photomultiplier modules, covering a f…
▽ More
NectarCAM is a camera proposed for the medium-sized telescopes of the Cherenkov Telescope Array (CTA) covering the central energy range of ~100 GeV to ~30 TeV. It has a modular design and is based on the NECTAr chip, at the heart of which is a GHz sampling Switched Capacitor Array and a 12-bit Analog to Digital converter. The camera will be equipped with 265 7-photomultiplier modules, covering a field of view of 8 degrees. Each module includes the photomultiplier bases, high voltage supply, pre-amplifier, trigger, readout and Ethernet transceiver. The recorded events last between a few nanoseconds and tens of nanoseconds. The camera trigger will be flexible so as to minimize the read-out dead-time of the NECTAr chips. NectarCAM is designed to sustain a data rate of more than 4 kHz with less than 5\% dead time. The camera concept, the design and tests of the various subcomponents and results of thermal and electrical prototypes are presented. The design includes the mechanical structure, cooling of the electronics, read-out, clock distribution, slow control, data-acquisition, triggering, monitoring and services.
△ Less
Submitted 26 August, 2015;
originally announced August 2015.
-
CTA Contributions to the 34th International Cosmic Ray Conference (ICRC2015)
Authors:
The CTA Consortium,
:,
A. Abchiche,
U. Abeysekara,
Ó. Abril,
F. Acero,
B. S. Acharya,
M. Actis,
G. Agnetta,
J. A. Aguilar,
F. Aharonian,
A. Akhperjanian,
A. Albert,
M. Alcubierre,
R. Alfaro,
E. Aliu,
A. J. Allafort,
D. Allan,
I. Allekotte,
R. Aloisio,
J. -P. Amans,
E. Amato,
L. Ambrogi,
G. Ambrosi,
M. Ambrosio
, et al. (1290 additional authors not shown)
Abstract:
List of contributions from the CTA Consortium presented at the 34th International Cosmic Ray Conference, 30 July - 6 August 2015, The Hague, The Netherlands.
List of contributions from the CTA Consortium presented at the 34th International Cosmic Ray Conference, 30 July - 6 August 2015, The Hague, The Netherlands.
△ Less
Submitted 11 September, 2015; v1 submitted 24 August, 2015;
originally announced August 2015.
-
Imaging and nulling properties of sparse-aperture Fizeau interferometers
Authors:
F. Henault
Abstract:
In this communication are presented rigorous and approximate analytical expressions of the Point Spread Function (PSF) and Field of View (FoV) achievable by multi-aperture Fizeau interferometers, either of the imaging or nulling types. The described formalism can be helpful for dimensioning future space missions in search of habitable extra-solar planets. Herein the characteristics of PSF and FoV…
▽ More
In this communication are presented rigorous and approximate analytical expressions of the Point Spread Function (PSF) and Field of View (FoV) achievable by multi-aperture Fizeau interferometers, either of the imaging or nulling types. The described formalism can be helpful for dimensioning future space missions in search of habitable extra-solar planets. Herein the characteristics of PSF and FoV are derived from simple analytical expressions that are further computed numerically in order to evidence the critical role of pupil re-imaging along the interferometer arms. The formalism is also well suited to simulating pseudo-images generated by a nulling Fizeau interferometer, and numerical computations demonstrate that it is only efficient for very short baselines. Finally, two different designs improving the nulling capacities of such exoplanet observing instruments are briefly presented and discussed
△ Less
Submitted 10 July, 2014;
originally announced July 2014.
-
Cheapest nuller in the world: Crossed beamsplitter cubes
Authors:
F. Henault,
A. Spang
Abstract:
In this communication is described a new type of Achromatic phase shifter (APS) suitable for both nulling interferometry and coronagraphy, based on a couple of crossed beamsplitter cubes, well-suited for equip** future spaceborne instruments searching for extra-solar planets located in a habitable zone. We present the general principle of this APS and discuss possible implementations into a null…
▽ More
In this communication is described a new type of Achromatic phase shifter (APS) suitable for both nulling interferometry and coronagraphy, based on a couple of crossed beamsplitter cubes, well-suited for equip** future spaceborne instruments searching for extra-solar planets located in a habitable zone. We present the general principle of this APS and discuss possible implementations into a nulling coronagraph telescope or into a sparse-aperture interferometer, either of the Fizeau or Michelson type. Expected performance in terms of transmission maps and a preliminary tolerance analysis are also provided. It turns out that the device is cheap, compact, and presents reasonable manufacturing tolerances and costs
△ Less
Submitted 29 August, 2015; v1 submitted 10 July, 2014;
originally announced July 2014.
-
Metrology calibration and very high accuracy centroiding with the NEAT testbed
Authors:
A. Crouzier,
F. Malbet,
O. Preis,
F. Henault,
P. Kern,
G. Martin,
P. Feautrier,
E. Stadler,
S. Lafrasse,
A. Delboulbe,
E. Behar,
M. Saint-Pe,
J. Dupont,
S. Potin,
C. Cara,
M. Donati,
E. Doumayrou,
P. O. Lagage,
A. Léger,
J. M. LeDuigou,
M. Shao,
R. Goullioud
Abstract:
NEAT is an astrometric mission proposed to ESA with the objectives of detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. NEAT requires the capability to measure stellar centroids at the precision of 5e-6 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 2e-5 pixel at two times Nyquist sampling, this was shown at the JPL…
▽ More
NEAT is an astrometric mission proposed to ESA with the objectives of detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. NEAT requires the capability to measure stellar centroids at the precision of 5e-6 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 2e-5 pixel at two times Nyquist sampling, this was shown at the JPL by the VESTA experiment. A metrology system was used to calibrate intra and inter pixel quantum efficiency variations in order to correct pixelation errors. The European part of the NEAT consortium is building a testbed in vacuum in order to achieve 5e-6 pixel precision for the centroid estimation. The goal is to provide a proof of concept for the precision requirement of the NEAT spacecraft.
The testbed consists of two main sub-systems. The first one produces pseudo stars: a blackbody source is fed into a large core fiber and lights-up a pinhole mask in the object plane, which is imaged by a mirror on the CCD. The second sub-system is the metrology, it projects young fringes on the CCD. The fringes are created by two single mode fibers facing the CCD and fixed on the mirror. In this paper we present the experiments conducted and the results obtained since July 2013 when we had the first light on both the metrology and pseudo stars. We explain the data reduction procedures we used.
△ Less
Submitted 5 July, 2014;
originally announced July 2014.
-
SPIRou: the near-infrared spectropolarimeter/high-precision velocimeter for the Canada-France-Hawaii telescope
Authors:
Étienne Artigau,
Driss Kouach,
Jean-François Donati,
René Doyon,
Xavier Delfosse,
Sébastien Baratchart,
Marielle Lacombe,
Claire Moutou,
Patrick Rabou,
Laurent P. Parès,
Yoan Micheau,
Simon Thibault,
Vladimir A. Reshetov,
Bruno Dubois,
Olivier Hernandez,
Philippe Vallée,
Shiang-Yu Wang,
François Dolon,
Francesco A. Pepe,
François Bouchy,
Nicolas Striebig,
François Hénault,
David Loop,
Leslie Saddlemyer,
Gregory Barrick
, et al. (8 additional authors not shown)
Abstract:
SPIRou is a near-IR échelle spectropolarimeter and high-precision velocimeter under construction as a next-generation instrument for the Canada-France-Hawaii-Telescope. It is designed to cover a very wide simultaneous near-IR spectral range (0.98-2.35 μm) at a resolving power of 73.5K, providing unpolarized and polarized spectra of low-mass stars at a radial velocity (RV) precision of 1m/s. The ma…
▽ More
SPIRou is a near-IR échelle spectropolarimeter and high-precision velocimeter under construction as a next-generation instrument for the Canada-France-Hawaii-Telescope. It is designed to cover a very wide simultaneous near-IR spectral range (0.98-2.35 μm) at a resolving power of 73.5K, providing unpolarized and polarized spectra of low-mass stars at a radial velocity (RV) precision of 1m/s. The main science goals of SPIRou are the detection of habitable super-Earths around low-mass stars and the study of how critically magnetic fields impact star / planet formation. Following a successful final design review in Spring 2014, SPIRou is now under construction and is scheduled to see first light in late 2017. We present an overview of key aspects of SPIRou's optical and mechanical design.
△ Less
Submitted 26 June, 2014;
originally announced June 2014.
-
Design of light concentrators for Cherenkov telescope observatories
Authors:
F. Hénault,
P. O. Petrucci,
L. jocou,
B. Khélifi,
P. Manigot,
S. Hormigos,
J. Knodlseder,
J. F. Olive,
P. Jean,
M. Punch
Abstract:
The Cherenkov Telescope Array (CTA) will be the largest cosmic gamma ray detector ever built in the world. It will be installed at two different sites in the North and South hemispheres and should be operational for about 30 years. In order to cover the desired energy range, the CTA is composed of typically 50-100 collecting telescopes of various sizes (from 6 to 24-m diameters). Most of them are…
▽ More
The Cherenkov Telescope Array (CTA) will be the largest cosmic gamma ray detector ever built in the world. It will be installed at two different sites in the North and South hemispheres and should be operational for about 30 years. In order to cover the desired energy range, the CTA is composed of typically 50-100 collecting telescopes of various sizes (from 6 to 24-m diameters). Most of them are equipped with a focal plane camera consisting of 1500 to 2000 Photomultipliers (PM) equipped with light concentrating optics, whose double function is to maximize the amount of Cherenkov light detected by the photo-sensors, and to block any stray light originating from the terrestrial environment. Two different optical solutions have been designed, respectively based on a Compound Parabolic Concentrator (CPC), and on a purely dioptric concentrating lens. In this communication are described the technical specifications, optical designs and performance of the different solutions envisioned for all these light concentrators. The current status of their prototy** activities is also given.
△ Less
Submitted 30 October, 2013; v1 submitted 17 September, 2013;
originally announced September 2013.
-
First experimental results of very high accuracy centroiding measurements for the neat astrometric mission
Authors:
A. Crouzier,
F. Malbet,
O. Preis,
F. Henault,
P. Kern,
G. Martin,
P. Feautrier,
E. Stadler,
S. Lafrasse,
A. Delboulbe,
E. Behar,
M. Saint-Pe,
J. Dupont,
S. Potin,
C. Cara,
M. Donati,
E. Doumayrou,
P. O. Lagage,
A. Leger,
J. M. LeDuigou,
M. Shao,
R. Goullioud
Abstract:
NEAT is an astrometric mission proposed to ESA with the objectives of detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. NEAT requires the capability to measure stellar centroids at the precision of 5e-6 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 2e-5 pixel at two times Nyquist sampling, this was shown at the JPL…
▽ More
NEAT is an astrometric mission proposed to ESA with the objectives of detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. NEAT requires the capability to measure stellar centroids at the precision of 5e-6 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 2e-5 pixel at two times Nyquist sampling, this was shown at the JPL by the VESTA experiment. A metrology system was used to calibrate intra and inter pixel quantum efficiency variations in order to correct pixelation errors. The European part of the NEAT consortium is building a testbed in vacuum in order to achieve 5e-6 pixel precision for the centroid estimation. The goal is to provide a proof of concept for the precision requirement of the NEAT spacecraft. In this paper we present the metrology and the pseudo stellar sources sub-systems, we present a performance model and an error budget of the experiment and we report the present status of the demonstration. Finally we also present our first results: the experiment had its first light in July 2013 and a first set of data was taken in air. The analysis of this first set of data showed that we can already measure the pixel positions with an accuracy of about 1e-4 pixel.
△ Less
Submitted 18 September, 2013; v1 submitted 13 September, 2013;
originally announced September 2013.
-
The NectarCAM camera project
Authors:
J-F. Glicenstein,
M. Barcelo,
J-A. Barrio,
O. Blanch,
J. Boix,
J. Bolmont,
C. Boutonnet,
S. Cazaux,
E. Chabanne,
C. Champion,
F. Chateau,
S. Colonges,
P. Corona,
S. Couturier,
B. Courty,
E. Delagnes,
C. Delgado,
J-P. Ernenwein,
S. Fegan,
O. Ferreira,
M. Fesquet,
G. Fontaine,
N. Fouque,
F. Henault,
D. Gascón
, et al. (35 additional authors not shown)
Abstract:
In the framework of the next generation of Cherenkov telescopes, the Cherenkov Telescope Array (CTA), NectarCAM is a camera designed for the medium size telescopes covering the central energy range of 100 GeV to 30 TeV. NectarCAM will be finely pixelated (~ 1800 pixels for a 8 degree field of view, FoV) in order to image atmospheric Cherenkov showers by measuring the charge deposited within a few…
▽ More
In the framework of the next generation of Cherenkov telescopes, the Cherenkov Telescope Array (CTA), NectarCAM is a camera designed for the medium size telescopes covering the central energy range of 100 GeV to 30 TeV. NectarCAM will be finely pixelated (~ 1800 pixels for a 8 degree field of view, FoV) in order to image atmospheric Cherenkov showers by measuring the charge deposited within a few nanoseconds time-window. It will have additional features like the capacity to record the full waveform with GHz sampling for every pixel and to measure event times with nanosecond accuracy. An array of a few tens of medium size telescopes, equipped with NectarCAMs, will achieve up to a factor of ten improvement in sensitivity over existing instruments in the energy range of 100 GeV to 10 TeV. The camera is made of roughly 250 independent read-out modules, each composed of seven photo-multipliers, with their associated high voltage base and control, a read-out board and a multi-service backplane board. The read-out boards use NECTAr (New Electronics for the Cherenkov Telescope Array) ASICs which have the dual functionality of analogue memories and Analogue to Digital Converter (ADC). The camera trigger to be used will be flexible so as to minimize the read-out dead-time of the NECTAr chips. We present the camera concept and the design and tests of the various subcomponents. The design includes the mechanical parts, the cooling of the electronics, the readout, the data acquisition, the trigger, the monitoring and services.
△ Less
Submitted 17 July, 2013;
originally announced July 2013.
-
CTA contributions to the 33rd International Cosmic Ray Conference (ICRC2013)
Authors:
The CTA Consortium,
:,
O. Abril,
B. S. Acharya,
M. Actis,
G. Agnetta,
J. A. Aguilar,
F. Aharonian,
M. Ajello,
A. Akhperjanian,
M. Alcubierre,
J. Aleksic,
R. Alfaro,
E. Aliu,
A. J. Allafort,
D. Allan,
I. Allekotte,
R. Aloisio,
E. Amato,
G. Ambrosi,
M. Ambrosio,
J. Anderson,
E. O. Angüner,
L. A. Antonelli,
V. Antonuccio
, et al. (1082 additional authors not shown)
Abstract:
Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil
Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil
△ Less
Submitted 29 July, 2013; v1 submitted 8 July, 2013;
originally announced July 2013.
-
An experimental testbed for NEAT to demonstrate micro-pixel accuracy
Authors:
A. Crouzier,
F. Malbet,
O. Preis,
F. Henault,
P. Kern,
G. Martin,
P. Feautrier,
c. Cara,
P. Lagage,
A. Leger,
J. M. LeDuigou,
M. Shao,
R. Goullioud
Abstract:
NEAT is an astrometric mission proposed to ESA with the objectives of detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. In NEAT, one fundamental aspect is the capability to measure stellar centroids at the precision of 5e-6 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 4e-5 pixel at Nyquist sampling. Simulations sh…
▽ More
NEAT is an astrometric mission proposed to ESA with the objectives of detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. In NEAT, one fundamental aspect is the capability to measure stellar centroids at the precision of 5e-6 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 4e-5 pixel at Nyquist sampling. Simulations showed that a precision of 2 micro-pixels can be reached, if intra and inter pixel quantum efficiency variations are calibrated and corrected for by a metrology system. The European part of the NEAT consortium is designing and building a testbed in vacuum in order to achieve 5e-6 pixel precision for the centroid estimation. The goal is to provide a proof of concept for the precision requirement of the NEAT spacecraft. In this paper we give the basic relations and trade-offs that come into play for the design of a centroid testbed and its metrology system. We detail the different conditions necessary to reach the targeted precision, present the characteristics of our current design and describe the present status of the demonstration.
△ Less
Submitted 30 August, 2012; v1 submitted 1 August, 2012;
originally announced August 2012.
-
Current results of the PERSEE testbench: the cophasing control and the polychromatic null rate
Authors:
Julien Lozi,
Frederic Cassaing,
Jean-Michel Le Duigou,
Beatrice Sorrente,
Jospeh Montri,
Jean-Michel Reess,
Emilie Lhome,
Tristan Buey,
Francois Henault,
Aurelie Marcotto,
Paul Girard,
Marc Barillot,
Marc Ollivier,
Vincent Coude du Foresto
Abstract:
Stabilizing a nulling interferometer at a nanometric level is the key issue to obtain deep null depths. The PERSEE breadboard has been designed to study and optimize the operation of a cophased nulling bench in the most realistic disturbing environment of a space mission. This presentation focuses on the current results of the PERSEE bench. In terms of metrology, we cophased at 0.33 nm rms for the…
▽ More
Stabilizing a nulling interferometer at a nanometric level is the key issue to obtain deep null depths. The PERSEE breadboard has been designed to study and optimize the operation of a cophased nulling bench in the most realistic disturbing environment of a space mission. This presentation focuses on the current results of the PERSEE bench. In terms of metrology, we cophased at 0.33 nm rms for the piston and 80 mas rms for the tip/tilt (0.14% of the Airy disk). A Linear Quadratic Gaussian (LQG) control coupled with an unsupervised vibration identification allows us to maintain that level of correction, even with characteristic vibrations of nulling interferometry space missions. These performances, with an accurate design and alignment of the bench, currently lead to a polychromatic unpolarised null depth of 8.9E-6 stabilized at 3E-7 on the [1.65-2.45] \mum spectral band (37% bandwidth).
△ Less
Submitted 14 September, 2011;
originally announced September 2011.
-
Imaging power of multi-fibered nulling telescopes for extra-solar planet characterization
Authors:
Francois Henault
Abstract:
In this paper are discussed the nulling and imaging properties of monolithic pupil telescopes equipped with a focal plane waveguide array, which could be envisaged as precursor space missions for future nulling interferometers or coronagraphs searching for habitable planets outside of our solar system. Three different concepts of nulling telescopes are reviewed, namely the Super-Resolving Telescop…
▽ More
In this paper are discussed the nulling and imaging properties of monolithic pupil telescopes equipped with a focal plane waveguide array, which could be envisaged as precursor space missions for future nulling interferometers or coronagraphs searching for habitable planets outside of our solar system. Three different concepts of nulling telescopes are reviewed, namely the Super-Resolving Telescope (SRT) having multiple, non-overlap** exit sub-apertures and the Sheared-Pupil Telescope (SPT), either unmasked or masked with a Lyot stop placed at its exit pupil plane. For each case simple theoretical relationships allowing to estimate the nulling rate, Signal-to-Noise Ratio (SNR) and Inner Working Angle (IWA) of the telescope are established or recalled, and numerical simulations are conducted. The preliminary results of this study show that the most promising designs should either be a SRT of high radiometric efficiency associated with an adequate leakage calibration procedure, or a masked SPT with potentially deeper nulling rates but lower SNR, depending on what kind of performance is to be preferred.
△ Less
Submitted 22 July, 2011;
originally announced July 2011.
-
Phase-shifting technique for improving the imaging capacity of sparse-aperture optical interferometers
Authors:
Francois Henault
Abstract:
In this paper, we describe the principle of a multi-aperture interferometer that uses a phase-shifting technique and is suitable for quick, snapshot imaging of astrophysical objects at extreme angular resolution through Fourier inversion. A few advantages of the proposed design are highlighted, among which are radiometric efficiency, Field of View equivalent to those of Fizeau interferometers, and…
▽ More
In this paper, we describe the principle of a multi-aperture interferometer that uses a phase-shifting technique and is suitable for quick, snapshot imaging of astrophysical objects at extreme angular resolution through Fourier inversion. A few advantages of the proposed design are highlighted, among which are radiometric efficiency, Field of View equivalent to those of Fizeau interferometers, and a preliminary calibration procedure allowing characterization of instrumental errors. For large telescope numbers, the proposed design also results in considerable simplification of the optical and mechanical design. Numerical simulations suggest that it should be possible to couple hundreds of telescopes on a single 4K x 4K detector array, using only conventional optical components or emerging technologies.
△ Less
Submitted 24 June, 2011; v1 submitted 12 May, 2011;
originally announced May 2011.
-
The Planar Optics Phase Sensor: a study for the VLTI 2nd Generation Fringe Tracker
Authors:
Nicolas Blind,
Jean-Baptiste LeBouquin,
Olivier Absil,
Mazen Alamir,
Jean-Philippe Berger,
Denis Defrère,
Philippe Feautrier,
Franois Hénault,
Laurent Jocou,
Pierre Kern,
Thomas Laurent,
Fabien Malbet,
Denis Mourard,
Karine Rousselet-Perrault,
Alain Sarlette,
Jean Surdej,
Nassima Tarmoul,
Eric Tatulli,
Lionel Vincent
Abstract:
In a few years, the second generation instruments of the Very Large Telescope Interferometer (VLTI) will routinely provide observations with 4 to 6 telescopes simultaneously. To reach their ultimate performance, they will need a fringe sensor capable to measure in real time the randomly varying optical paths differences. A collaboration between LAOG (PI institute), IAGL, OCA and GIPSA-Lab has prop…
▽ More
In a few years, the second generation instruments of the Very Large Telescope Interferometer (VLTI) will routinely provide observations with 4 to 6 telescopes simultaneously. To reach their ultimate performance, they will need a fringe sensor capable to measure in real time the randomly varying optical paths differences. A collaboration between LAOG (PI institute), IAGL, OCA and GIPSA-Lab has proposed the Planar Optics Phase Sensor concept to ESO for the 2nd Generation Fringe Tracker. This concept is based on the integrated optics technologies, enabling the conception of extremely compact interferometric instruments naturally providing single-mode spatial filtering. It allows operations with 4 and 6 telescopes by measuring the fringes position thanks to a spectrally dispersed ABCD method. We present here the main analysis which led to the current concept as well as the expected on-sky performance and the proposed design.
△ Less
Submitted 25 August, 2010;
originally announced August 2010.
-
PERSEE: Experimental results on the cophased nulling bench
Authors:
Julien Lozi,
Frédéric Cassaing,
Jean-Michel Le Duigou,
Kamel Houairi,
Béatrice Sorrente,
Joseph Montri,
Sophie Jacquinod,
Jean-Michel Reess,
Laurie Pham,
Emilie Lhomé,
Tristan Buey,
François Hénault,
Aurélie Marcotto,
Paul Girard,
Nicolas Mauclert,
Marc Barillot,
Vincent Coudé du Foresto,
Marc Ollivier
Abstract:
Nulling interferometry is still a promising method to characterize spectra of exoplanets. One of the main issues is to cophase at a nanometric level each arm despite satellite disturbances. The bench PERSEE aims to prove the feasibility of that technique for spaceborne missions. After a short description of PERSEE, we will first present the results obtained in a simplified configuration: we have c…
▽ More
Nulling interferometry is still a promising method to characterize spectra of exoplanets. One of the main issues is to cophase at a nanometric level each arm despite satellite disturbances. The bench PERSEE aims to prove the feasibility of that technique for spaceborne missions. After a short description of PERSEE, we will first present the results obtained in a simplified configuration: we have cophased down to 0.22 nm rms in optical path difference (OPD) and 60 mas rms in tip/tilt, and have obtained a monochromatic null of 3E-5 stabilized at 3E-6. The goal of 1 nm with additional typical satellite disturbances requires the use of an optimal control law; that is why we elaborated a dedicated Kalman filter. Simulations and experiments show a good rejection of disturbances. Performance of the bench should be enhanced by using a Kalman control law, and we should be able to reach the desired nanometric stability. Following, we will present the first results of the final polychromatic configuration, which includes an achromatic phase shifter, perturbators and optical delay lines. As a conclusion, we give the first more general lessons we have already learned from this experiment, both at system and component levels for a future space mission.
△ Less
Submitted 18 August, 2010;
originally announced August 2010.
-
PSF and field of view characteristics of imaging and nulling interferometers
Authors:
François Hénault
Abstract:
In this communication are presented some complements to a recent paper entitled "Simple Fourier optics formalism for high angular resolution systems and nulling interferometry", dealing with imaging and nulling capacities of a few types of multi-aperture optical systems. Herein the characteristics of such systems in terms of Point Spread Function (PSF) and Field of View (FoV) are derived from simp…
▽ More
In this communication are presented some complements to a recent paper entitled "Simple Fourier optics formalism for high angular resolution systems and nulling interferometry", dealing with imaging and nulling capacities of a few types of multi-aperture optical systems. Herein the characteristics of such systems in terms of Point Spread Function (PSF) and Field of View (FoV) are derived from simple analytical expressions that are further evaluated numerically for various configurations. We consider successively the general cases of Fizeau and Michelson interferometers, and those of a monolithic pupil, nulling telescope, of a nulling, Sheared-Pupil Telescope (SPT), and of a sparse aperture, Axially Combined Interferometer (ACI). The analytical formalism also allows establishing the exact Object-Image relationships applicable to nulling PSTs or ACIs that are planned for future space missions searching for habitable extra-solar planets.
△ Less
Submitted 1 April, 2010;
originally announced April 2010.
-
Multi-spectral piston sensor for co-phasing giant segmented mirrors and multi-aperture interferometric arrays
Authors:
Francois Henault
Abstract:
This paper presents the optical design of a multi-spectral piston sensor suitable to co-phasing giant segmented mirrors equip** the Future Extremely Large Telescopes (ELTs). The general theory of the sensor is described in detail and numerical simulations have been carried out, demonstrating that direct piston and tip-tilt measurements are feasible within accuracies respectively close to 20 nm…
▽ More
This paper presents the optical design of a multi-spectral piston sensor suitable to co-phasing giant segmented mirrors equip** the Future Extremely Large Telescopes (ELTs). The general theory of the sensor is described in detail and numerical simulations have been carried out, demonstrating that direct piston and tip-tilt measurements are feasible within accuracies respectively close to 20 nm and 10 nano-radians. Those values are compatible with the co-phasing requirements, although the method seems to be perturbed by uncorrected atmospheric seeing
△ Less
Submitted 27 August, 2009;
originally announced August 2009.
-
Simple Fourier optics formalism for high angular resolution systems and nulling interferometry
Authors:
Francois Henault
Abstract:
In this paper are reviewed various designs of advanced, multi-aperture optical systems dedicated to high angular resolution imaging or to the detection of exo-planets by nulling interferometry. A simple Fourier optics formalism applicable to both imaging arrays and nulling interferometers is presented, allowing to derive their basic theoretical relationships as convolution or cross correlation p…
▽ More
In this paper are reviewed various designs of advanced, multi-aperture optical systems dedicated to high angular resolution imaging or to the detection of exo-planets by nulling interferometry. A simple Fourier optics formalism applicable to both imaging arrays and nulling interferometers is presented, allowing to derive their basic theoretical relationships as convolution or cross correlation products suitable for fast and accurate computation. Several unusual designs, such as a super-resolving telescope utilizing a mosaicking observation procedure or a free-flying, axially recombined interferometer are examined, and their performance in terms of imaging and nulling capacity are assessed. In all considered cases, it is found that the limiting parameter is the diameter of the individual telescopes. The entire study is only valid in the frame of first-order geometrical optics and scalar diffraction theory. Furthermore, it is assumed that all entrance sub-apertures are optically conjugated with their associated exit pupils, a particularity inducing an instrumental behavior comparable with those of diffraction gratings.
△ Less
Submitted 27 August, 2009; v1 submitted 24 April, 2009;
originally announced April 2009.
-
Telescope interferometers: an alternative to classical wavefront sensors
Authors:
Francois Henault
Abstract:
Several types of Wavefront Sensors (WFS) are nowadays available in the field of Adaptive Optics (AO). Generally speaking, their basic principle consists in measuring slopes or curvatures of Wavefront Errors (WFE) transmitted by a telescope, subsequently reconstructing WFEs digitally. Such process, however, does not seem to be well suited for evaluating co-phasing or piston errors of future large…
▽ More
Several types of Wavefront Sensors (WFS) are nowadays available in the field of Adaptive Optics (AO). Generally speaking, their basic principle consists in measuring slopes or curvatures of Wavefront Errors (WFE) transmitted by a telescope, subsequently reconstructing WFEs digitally. Such process, however, does not seem to be well suited for evaluating co-phasing or piston errors of future large segmented telescopes in quasi real-time. This communication presents an original, recently proposed technique for direct WFE sensing. The principle of the device, which is named "Telescope-Interferometer" (TI), is based on the addition of a reference optical arm into the telescope pupil plane. Then incident WFEs are deduced from Point Spread Function (PSF) measurements at the telescope focal plane. Herein are described two different types of TIs, and their performance are discussed in terms of intrinsic measurement accuracy and spatial resolution. Various error sources are studied by means of numerical simulations, among which photon noise sounds the most critical. Those computations finally help to define the application range of the TI method in an AO regime, including main and auxiliary telescope diameters and magnitude of the guide star. Some practical examples of optical configurations are also described and commented.
△ Less
Submitted 29 August, 2008;
originally announced August 2008.
-
Computing extinction maps of star nulling interferometers
Authors:
Francois Henault
Abstract:
Herein is discussed the performance of spaceborne nulling interferometers searching for extra-solar planets, in terms of their extinction maps projected on-sky. In particular, it is shown that the designs of Spatial Filtering (SF) and Achromatic Phase Shifter (APS) subsystems, both required to achieve planet detection and characterization, can sensibly affect the nulling maps produced by a simpl…
▽ More
Herein is discussed the performance of spaceborne nulling interferometers searching for extra-solar planets, in terms of their extinction maps projected on-sky. In particular, it is shown that the designs of Spatial Filtering (SF) and Achromatic Phase Shifter (APS) subsystems, both required to achieve planet detection and characterization, can sensibly affect the nulling maps produced by a simple Bracewell interferometer. Analytical relationships involving cross correlation products are provided and numerical simulations are performed, demonstrating marked differences in the aspect of extinction maps and the values of attained fringes contrasts. It is concluded that depending on their basic principles and designs, FS and APS will result in variable capacities for serendipitous discoveries of planets orbiting around their parent star. The mathematical relationships presented in this paper are assumed to be general, i.e. they should apply to other types of multi-apertures nulling interferometers.
△ Less
Submitted 14 February, 2008;
originally announced February 2008.
-
Signal-to-noise ratio of phase sensing telescope interferometers
Authors:
Francois Henault
Abstract:
This paper is the third part of a trilogy dealing with the principles, performance and limitations of what I named "Telescope-Interferometers" (TIs). The basic idea consists in transforming one telescope into a Wavefront Error (WFE) sensing device. This can be achieved in two different ways, namely the off axis and phase-shifting TIs. In both cases the Point-Spread Function (PSF) measured in the…
▽ More
This paper is the third part of a trilogy dealing with the principles, performance and limitations of what I named "Telescope-Interferometers" (TIs). The basic idea consists in transforming one telescope into a Wavefront Error (WFE) sensing device. This can be achieved in two different ways, namely the off axis and phase-shifting TIs. In both cases the Point-Spread Function (PSF) measured in the focal plane of the telescope carries information about the transmitted WFE, which is retrieved by fast and simple algorithms suitable to an Adaptive Optics (AO) regime. Herein are evaluated the uncertainties of both types of TIs, in terms of noise and systematic errors. Numerical models are developed in order to establish the dependence of driving parameters such as useful spectral range, angular size of the observed star, or detector noise on the total WFE measurement error. The latter is found particularly sensitive to photon noise, which rapidly governs the achieved accuracy for telescope diameters higher than 10 m. We study a few practical examples, showing that TI method is applicable to AO systems on telescope diameters ranging from 10 to 50 m, depending on seeing conditions and magnitude of the observed stars. We also discuss the case of a space-borne coronagraph where TI technique provides high sampling of the input WFE map.
△ Less
Submitted 14 February, 2008;
originally announced February 2008.
-
Conceptual design of a phase shifting telescope-interferometer
Authors:
Francois Henault
Abstract:
This paper deals with the theoretical principle and optical design of a phase-shifting telescope-interferometer. What is called a "Telescope-Interferometer" (T-I) is indeed a novel, recently proposed Wavefront Error (WFE) sensing technique, whose basic idea consists in combining the main pupil of a telescope with a second, off-axis reference arm. Then a weak modulation of the Point Spread Functi…
▽ More
This paper deals with the theoretical principle and optical design of a phase-shifting telescope-interferometer. What is called a "Telescope-Interferometer" (T-I) is indeed a novel, recently proposed Wavefront Error (WFE) sensing technique, whose basic idea consists in combining the main pupil of a telescope with a second, off-axis reference arm. Then a weak modulation of the Point Spread Function (PSF) is generated at the focal plane, allowing for direct phase measurements. We propose a notable improvement of the method, inspired from classical principles of phase shifting interferometry. Herein are presented the alternative principle and its achievable measurement accuracy. The technique shows high performance excepted on narrow areas located near the pupil boundary. It is applicable to both ground or space telescopes and is suitable for the co-phasing of segmented mirrors, which is of prime importance in view of future giant telescope projects.
△ Less
Submitted 28 November, 2005;
originally announced November 2005.
-
An analysis of stellar interferometers as wavefront sensors
Authors:
Francois Henault
Abstract:
This paper presents the basic principle and theoretical relationships of an original method allowing to retrieve the Wavefront Errors (WFE) of a ground or space-borne telescope when combining its main pupil with a second, decentered reference optical arm. The measurement accuracy of such a "telescope-interferometer" is then estimated by means of various numerical simulations, demonstrating a hig…
▽ More
This paper presents the basic principle and theoretical relationships of an original method allowing to retrieve the Wavefront Errors (WFE) of a ground or space-borne telescope when combining its main pupil with a second, decentered reference optical arm. The measurement accuracy of such a "telescope-interferometer" is then estimated by means of various numerical simulations, demonstrating a high performance excepted on limited areas near the telescope pupil rim. In particular, it allows direct phase evaluation (thus avoiding the use of first or second-order derivatives), which is of special interest for the co-phasing of segmented mirrors in future giant telescopes projects. We finally define the useful practical domain of the method, which seems to be better suited for periodical diagnostics of space or ground based telescopes, or to real-time scientific observations in some very specific cases (e.g. the central star in extrasolar planets searching instruments).
△ Less
Submitted 25 October, 2005;
originally announced October 2005.
-
Wavefront sensor based on varying transmission filters: theory and expected performance
Authors:
Francois Henault
Abstract:
The use of Wavefront Sensors (WFS) is nowadays fundamental in the field of instrumental optics. This paper discusses the principle of an original and recently proposed new class of WFS. Their principle consists in evaluating the slopes of the wavefront errors by means of varying density filters placed into the image plane of the tested optical system. The device, sometimes called 'optical differ…
▽ More
The use of Wavefront Sensors (WFS) is nowadays fundamental in the field of instrumental optics. This paper discusses the principle of an original and recently proposed new class of WFS. Their principle consists in evaluating the slopes of the wavefront errors by means of varying density filters placed into the image plane of the tested optical system. The device, sometimes called 'optical differentiation WFS' is completed by a digital data-processing system reconstructing the wavefront from the obtained slopes. Various luminous sources of different wavelengths and spectral widths can be employed. The capacities of the method are discussed from the geometrical and Fourier optics points of view, then by means of numerical simulations showing that the ultimate accuracy can be well below lambda/10 and lambda/100 Peak-to-Valley (PTV) and RMS respectively, provided that certain precautions are taken.
△ Less
Submitted 25 October, 2005;
originally announced October 2005.