-
Rotation in stellar interiors: General formulation and an asteroseismic-calibrated transport by the Tayler instability
Authors:
P. Eggenberger,
F. D. Moyano,
J. W. den Hartogh
Abstract:
Context: Asteroseismic measurements of the internal rotation of evolved stars indicate that at least one unknown efficient angular momentum (AM) transport mechanism is needed in stellar radiative zones. Aims: We investigate the impact of AM transport by the magnetic Tayler instability as a possible candidate for such a missing mechanism. Methods: We derived general equations for AM transport by th…
▽ More
Context: Asteroseismic measurements of the internal rotation of evolved stars indicate that at least one unknown efficient angular momentum (AM) transport mechanism is needed in stellar radiative zones. Aims: We investigate the impact of AM transport by the magnetic Tayler instability as a possible candidate for such a missing mechanism. Methods: We derived general equations for AM transport by the Tayler instability to be able to test different versions of the Tayler-Spruit (TS) dynamo. Results: These general equations highlight, in a simple way, the key role played by the adopted dam** timescale of the azimuthal magnetic field on the efficiency of the resulting AM transport. Using this framework, we first show that the original TS dynamo provides an insufficient coupling in low-mass red giants that have a radiative core during the main sequence (MS), as was found previously for more massive stars that develop a convective core during the MS. We then derived a new calibrated version of the original TS dynamo and find that the dam** timescale adopted for the azimuthal field in the original TS dynamo has to be increased by a factor of about 200 to correctly reproduce the core rotation rates of stars on the red giant branch (RGB). This calibrated version predicts no correlation of the core rotation rates with the stellar mass for RGB stars in good agreement with asteroseismic observations. Moreover, it correctly reproduces the core rotation rates of clump stars similarly to a revised prescription proposed recently. Interestingly, this new calibrated version of the TS dynamo is found to be in slightly better agreement with the core rotation rates of sub-giant stars, while simultaneously better accounting for the evolution of the core rotation rates along the RGB compared to the revised dynamo version. These results were obtained with both the Geneva and the MESA stellar evolution codes.
△ Less
Submitted 29 September, 2023;
originally announced September 2023.
-
Barium stars as tracers of s-process nucleosynthesis in AGB stars II. Using machine learning techniques on 169 stars
Authors:
J. W. den Hartogh,
A. Yagüe López,
B. Cseh,
M. Pignatari,
B. Világos,
M. P. Roriz,
C. B. Pereira,
N. A. Drake,
S. Junqueira,
M. Lugaro
Abstract:
We aim to analyse the abundance pattern of 169 Barium (Ba) stars, using machine learning techniques and the AGB final surface abundances predicted by Fruity and Monash stellar models. We developed machine learning algorithms that use the abundance pattern of Ba stars as input to classify the initial mass and metallicity of its companion star using stellar model predictions. We use two algorithms:…
▽ More
We aim to analyse the abundance pattern of 169 Barium (Ba) stars, using machine learning techniques and the AGB final surface abundances predicted by Fruity and Monash stellar models. We developed machine learning algorithms that use the abundance pattern of Ba stars as input to classify the initial mass and metallicity of its companion star using stellar model predictions. We use two algorithms: the first exploits neural networks to recognise patterns and the second is a nearest-neighbour algorithm, which focuses on finding the AGB model that predicts final surface abundances closest to the observed Ba star values. In the second algorithm we include the error bars and observational uncertainties to find the best fit model. The classification process is based on the abundances of Fe, Rb, Sr, Zr, Ru, Nd, Ce, Sm, and Eu. We selected these elements by systematically removing s-process elements from our AGB model abundance distributions, and identifying those whose removal has the biggest positive effect on the classification. We excluded Nb, Y, Mo, and La. Our final classification combines the output of both algorithms to identify for each Ba star companion an initial mass and metallicity range. With our analysis tools we identify the main properties for 166 of the 169 Ba stars in the stellar sample. The classifications based on both stellar sets of AGB final abundances show similar distributions, with an average initial mass of M = 2.23 MSun and 2.34 MSun and an average [Fe/H] = -0.21 and -0.11, respectively. We investigated why the removal of Nb, Y, Mo, and La improves our classification and identified 43 stars for which the exclusion had the biggest effect. We show that these stars have statistically significant different abundances for these elements compared to the other Ba stars in our sample. We discuss the possible reasons for these differences in the abundance patterns.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
First models of s process in AGB stars of solar metallicity for the stellar evolutionary code ATON with a novel stable explicit numerical solver
Authors:
A. Yagüe López,
D. A. García-Hernández,
P. Ventura,
C. L. Doherty,
J. W. den Hartogh,
S. W. Jones,
M. Lugaro
Abstract:
Aims. We describe the first s-process post-processing models for asymptotic giant branch (AGB) stars of masses 3, 4 and 5 M at solar metallicity (Z=0.018) computed using the input from the stellar evolutionary code aton. Methods. The models are computed with the new code snuppat(S-process NUcleosynthesis Post-Processing code for aton), including an advective scheme for the convective overshoot tha…
▽ More
Aims. We describe the first s-process post-processing models for asymptotic giant branch (AGB) stars of masses 3, 4 and 5 M at solar metallicity (Z=0.018) computed using the input from the stellar evolutionary code aton. Methods. The models are computed with the new code snuppat(S-process NUcleosynthesis Post-Processing code for aton), including an advective scheme for the convective overshoot that leads to the formation of the main neutron source, 13C. Each model is post-processed with 3 different values of the free overshoot parameter. Included in the code snuppat is the novel Patankar-Euler-Deflhard explicit numerical solver, that we use to solve the nuclear network system of differential equations. Results. The results are compared to those from other s-process nucleosynthesis codes (Monash,fruity, and NuGrid), as well as observations of s-process enhancement in AGB stars, planetary nebulae, and barium stars. This comparison shows that the relatively high abundance of12C in the He-rich intershell in aton results in as-process abundance pattern that favours the second over the first s-process peak for all the masses explored. Also, our choice of an advective as opposed to diffusive numerical scheme for the convective overshoot results in significants-process nucleosynthesis also for the 5 M models, which may be in contradiction with observations.
△ Less
Submitted 15 October, 2021;
originally announced October 2021.
-
The Radioactive Nuclei $^{\textbf{26}}$Al and $^{\textbf{60}}$Fe in the Cosmos and in the Solar System
Authors:
Roland Diehl,
Maria Lugaro,
Alexander Heger,
Andre Sieverding,
Xiaodong Tang,
KuoAng Li,
Ertao Li,
Carolyn L. Doherty,
Martin G. H. Krause,
Anton Wallner,
Nikos Prantzos,
Hannah E. Brinkman,
Jaqueline W. den Hartogh,
Benjamin Wehmeyer,
Andrés Yagüe López,
Moritz M. M. Pleintinger,
Projjval Banerjee,
Wei Wang
Abstract:
The cosmic evolution of the chemical elements from the Big Bang to the present time is driven by nuclear fusion reactions inside stars and stellar explosions. A cycle of matter recurrently re-processes metal-enriched stellar ejecta into the next generation of stars. The study of cosmic nucleosynthesis and of this matter cycle requires the understanding of the physics of nuclear reactions, of the c…
▽ More
The cosmic evolution of the chemical elements from the Big Bang to the present time is driven by nuclear fusion reactions inside stars and stellar explosions. A cycle of matter recurrently re-processes metal-enriched stellar ejecta into the next generation of stars. The study of cosmic nucleosynthesis and of this matter cycle requires the understanding of the physics of nuclear reactions, of the conditions at which the nuclear reactions are activated inside the stars and stellar explosions, of the stellar ejection mechanisms through winds and explosions, and of the transport of the ejecta towards the next cycle, from hot plasma to cold, star-forming gas. Due to the long timescales of stellar evolution, and because of the infrequent occurrence of stellar explosions, observational studies are challenging. Due to their radioactive lifetime of million years, the 26Al and 60Fe isotopes are suitable to characterise simultaneously the processes of nuclear fusion reactions and of interstellar transport. We describe and discuss the nuclear reactions involved in the production and destruction of 26Al and 60Fe, the key characteristics of the stellar sites of their nucleosynthesis and their interstellar journey after ejection from the nucleosynthesis sites. We connect the theoretical astrophysical aspects to the variety of astronomical messengers, from stardust and cosmic-ray composition measurements, through observation of gamma rays produced by radioactivity, to material deposited in deep-sea ocean crusts and to the inferred composition of the first solids that have formed in the Solar System. We show that considering measurements of the isotopic ratio of 26Al to 60Fe eliminate some of the unknowns when interpreting astronomical results, and discuss the lessons learned from these two isotopes on cosmic chemical evolution.
△ Less
Submitted 5 October, 2021; v1 submitted 17 September, 2021;
originally announced September 2021.
-
Aluminium-26 from massive binary stars II. Rotating single stars up to core-collapse and their impact on the early Solar System
Authors:
Hannah E. Brinkman,
J. W. den Hartogh,
C. L. Doherty,
M. Pignatari,
M. Lugaro
Abstract:
Radioactive nuclei were present in the early Solar System, as inferred from analysis of meteorites. Many are produced in massive stars, either during their lives or their final explosions. In the first paper in this series (Brinkman et al. 2019), we focused on the production of $^{26}$Al in massive binaries. Here, we focus on the production of another two short-lived radioactive nuclei, $^{36}$Cl…
▽ More
Radioactive nuclei were present in the early Solar System, as inferred from analysis of meteorites. Many are produced in massive stars, either during their lives or their final explosions. In the first paper in this series (Brinkman et al. 2019), we focused on the production of $^{26}$Al in massive binaries. Here, we focus on the production of another two short-lived radioactive nuclei, $^{36}$Cl and $^{41}$Ca, and the comparison to the early Solar System data. We used the MESA stellar evolution code with an extended nuclear network and computed massive (10-80 M$ _{\odot} $), rotating (with initial velocities of 150 and 300 km/s) and non-rotating single stars at solar metallicity (Z=0.014) up to the onset of core collapse. We present the wind yields for the radioactive isotopes $^{26}$Al, $^{36}$Cl, and $^{41}$Ca, and the stable isotopes $^{19}$F and $^{20}$Ne. In relation to the stable isotopes, we find that only the most massive models, $\geq$ 60M$_{\odot}$ and $\geq$ 40M$_{\odot}$ give positive $^{19}$F and $^{20}$Ne yields, respectively, depending on the initial rotation rate. In relation to the radioactive isotopes, we find that the early Solar System abundances of $^{26}$Al and $^{41}$Ca can be matched with by models with initial masses $\geq$40M$_{\odot}$, while $^{36}$Cl is matched only by our most massive models, $\geq$60M$_{\odot}$. $^{60}$Fe is not significantly produced by any wind model, as required by the observations. Therefore, massive star winds are a favoured candidate for the origin of the very short-lived $^{26}$Al, $^{36}$Cl, and $^{41}$Ca in the early Solar System.
△ Less
Submitted 29 September, 2021; v1 submitted 13 September, 2021;
originally announced September 2021.
-
Seismic evidence for near solid-body rotation in two Kepler subgiants and implications for angular momentum transport
Authors:
S. Deheuvels,
J. Ballot,
P. Eggenberger,
F. Spada,
A. Noll,
J. W. den Hartogh
Abstract:
Asteroseismic measurements of the internal rotation of subgiants and red giants all show the need for invoking a more efficient transport of angular momentum than theoretically predicted. Constraints on the core rotation rate are available starting from the base of the red giant branch (RGB) and we are still lacking information on the internal rotation of less evolved subgiants. We identified two…
▽ More
Asteroseismic measurements of the internal rotation of subgiants and red giants all show the need for invoking a more efficient transport of angular momentum than theoretically predicted. Constraints on the core rotation rate are available starting from the base of the red giant branch (RGB) and we are still lacking information on the internal rotation of less evolved subgiants. We identified two young Kepler subgiants, KIC8524425 and KIC5955122, whose mixed modes are clearly split by rotation. Using the full Kepler data set, we extracted the mode frequencies and rotational splittings for the two stars using a Bayesian approach. We then performed a detailed seismic modeling of both targets and used the rotational kernels to invert their internal rotation profiles. We found that both stars are rotating nearly as solid bodies, with core-envelope contrasts of $Ω_{\rm g}/Ω_{\rm p}=0.68\pm0.47$ for KIC8524425 and $0.72\pm0.37$ for KIC5955122. This result shows that the internal transport of angular momentum has to occur faster than the timescale at which differential rotation is forced in these stars (between 300 Myr and 600 Myr). By modeling the additional transport of angular momentum as a diffusive process with a constant viscosity $ν_{\rm add}$, we found that values of $ν_{\rm add}>5\times10^4$~cm$^2$.s$^{-1}$ are required to account for the internal rotation of KIC8524425, and $ν_{\rm add}>1.5\times10^5$~cm$^2$.s$^{-1}$ for KIC5955122. These values are lower than or comparable to the efficiency of the core-envelope coupling during the main sequence, as given by the surface rotation of stars in open clusters. On the other hand, they are higher than the viscosity needed to reproduce the rotation of subgiants near the base of the RGB. Our results yield further evidence that the efficiency of the internal redistribution of angular momentum decreases during the subgiant phase.
△ Less
Submitted 6 July, 2020;
originally announced July 2020.
-
Asteroseismology of evolved stars to constrain the internal transport of angular momentum. III. Using the rotation rates of intermediate-mass stars to test the Fuller-formalism
Authors:
J. W. den Hartogh,
P. Eggenberger,
S. Deheuvels
Abstract:
Context: The internal characteristics of stars, such as their core rotation rates, are obtained via asteroseismic observations. A comparison of core rotation rates found in this way with core rotation rates as predicted by stellar evolution models demonstrate a large discrepancy. This means that there must be a process of angular momentum transport missing in the current theory of stellar evolutio…
▽ More
Context: The internal characteristics of stars, such as their core rotation rates, are obtained via asteroseismic observations. A comparison of core rotation rates found in this way with core rotation rates as predicted by stellar evolution models demonstrate a large discrepancy. This means that there must be a process of angular momentum transport missing in the current theory of stellar evolution. A new formalism was recently proposed to fill in for this missing process, which has the Tayler instability as its starting point (hereafter referred to as `Fuller-formalism'). Aims: We investigate the effect of the Fuller-formalism on the internal rotation of stellar models with an initial mass of 2.5 Mo. Methods: Stellar evolution models, including the Fuller-formalism, of intermediate-mass stars were calculated to make a comparison between asteroseismically obtained core rotation rates in the core He burning phase and in the white dwarf phase. Results: Our main results show that models including the Fuller-formalism can match the core rotation rates obtained for the core He burning phases. However, these models are unable to match the rotation rates obtained for white dwarfs. When we exclude the Fuller-formalism at the end of the core He burning phase, the white dwarf rotation rates of the models match the observed rates. Conclusions: We conclude that in the present form, the Fuller-formalism cannot be the sole solution for the missing process of angular momentum transport in intermediate-mass stars.
△ Less
Submitted 16 February, 2020;
originally announced February 2020.
-
Asteroseismology of evolved stars to constrain the internal transport of angular momentum II. Test of a revised prescription for transport by the Tayler instability
Authors:
P. Eggenberger,
J. W. den Hartogh,
G. Buldgen,
G. Meynet,
S. J. A. J. Salmon,
S. Deheuvels
Abstract:
Context: Asteroseismic measurements reveal that an unknown efficient angular momentum (AM) transport mechanism is needed for subgiant and red giant stars. A revised prescription for AM transport by the magnetic Tayler instability has been recently proposed as a possible candidate for such a missing mechanism.
Results: The revised prescription for the transport by the Tayler instability leads to…
▽ More
Context: Asteroseismic measurements reveal that an unknown efficient angular momentum (AM) transport mechanism is needed for subgiant and red giant stars. A revised prescription for AM transport by the magnetic Tayler instability has been recently proposed as a possible candidate for such a missing mechanism.
Results: The revised prescription for the transport by the Tayler instability leads to low core rotation rates after the main sequence that are in better global agreement with asteroseismic measurements than those predicted by models with purely hydrodynamic processes or with the original Tayler-Spruit dynamo. A detailed comparison with asteroseismic data shows that the rotational properties of at most two of the six subgiants can be correctly reproduced by models accounting for this revised magnetic transport process. This result is obtained independently of the value adopted for the calibration parameter in this prescription. We also find that this transport by the Tayler instability faces difficulties in simultaneously reproducing asteroseismic measurements available for subgiant and red giant stars. The low values of the calibration parameter needed to correctly reproduce the rotational properties of two of the six subgiants lead to core rotation rates during the red giant phase that are too high. Inversely, the higher values of this parameter needed to reproduce the core rotation rates of red giants lead to a very low degree of radial differential rotation before the red giant phase, which is in contradiction with the internal rotation of subgiant stars.
Conclusions: In its present form, the revised prescription for the transport by the Tayler instability does not provide a complete solution to the missing AM transport revealed by asteroseismology of evolved stars.
△ Less
Submitted 30 January, 2020;
originally announced January 2020.
-
The s process in rotating low-mass AGB stars. Nucleosynthesis calculations in models matching asteroseismic constraints
Authors:
J. W. den Hartogh,
R. Hirschi,
M. Lugaro,
C. L. Doherty,
U. Battino,
F. Herwig,
M. Pignatari,
P. Eggenberger
Abstract:
Aims. We investigate the s-process during the AGB phase of stellar models whose cores are enforced to rotate at rates consistent with asteroseismology observations of their progenitors and successors. Methods. We calculated new 2M$_{\odot}$, Z=0.01 models, rotating at 0, 125, and 250 km/s at the start of main sequence. An artificial, additional viscosity was added to enhance the transport of angul…
▽ More
Aims. We investigate the s-process during the AGB phase of stellar models whose cores are enforced to rotate at rates consistent with asteroseismology observations of their progenitors and successors. Methods. We calculated new 2M$_{\odot}$, Z=0.01 models, rotating at 0, 125, and 250 km/s at the start of main sequence. An artificial, additional viscosity was added to enhance the transport of angular momentum in order to reduce the core rotation rates to be in agreement with asteroseismology observations. We compared rotation rates of our models with observed rotation rates during the MS up to the end of core He burning, and the white dwarf phase. Results. We present nucleosynthesis calculations for these rotating AGB models that were enforced to match the asteroseismic constraints on rotation rates of MS, RGB, He-burning, and WD stars. In particular, we calculated one model that matches the upper limit of observed rotation rates of core He-burning stars and we also included a model that rotates one order of magnitude faster than the upper limit of the observations. The s-process production in both of these models is comparable to that of non-rotating models. Conclusions. Slowing down the core rotation rate in stars to match the above mentioned asteroseismic constraints reduces the rotationally induced mixing processes to the point that they have no effect on the s-process nucleosynthesis. This result is independent of the initial rotation rate of the stellar evolution model. However, there are uncertainties remaining in the treatment of rotation in stellar evolution, which need to be reduced in order to confirm our conclusions, including the physical nature of our approach to reduce the core rotation rates of our models, and magnetic processes.
△ Less
Submitted 24 August, 2019;
originally announced August 2019.
-
NuGrid stellar data set - III. Updated low-mass AGB models and s-process nucleosynthesis with metallicities Z=0.01, Z=0.02 and Z=0.03
Authors:
Umberto Battino,
Ashley Tattersall,
Claudia Lederer-Woods,
Falk Herwig,
Pavel Denissenkov,
Raphael Hirschi,
Reto Trappitsch,
Jacqueline W. den Hartogh,
Marco Pignatari
Abstract:
The production of the neutron-capture isotopes beyond iron that we observe today in the solar system is the result of the combined contribution of the r-process, the s- process and possibly the i-process. Low-mass AGB (2 < M/Msun < 3) and massive (M >10 Msun ) stars have been identified as the sites of the s-process. In this work we consider the evolution and nucleosynthesis of low-mass AGB stars.…
▽ More
The production of the neutron-capture isotopes beyond iron that we observe today in the solar system is the result of the combined contribution of the r-process, the s- process and possibly the i-process. Low-mass AGB (2 < M/Msun < 3) and massive (M >10 Msun ) stars have been identified as the sites of the s-process. In this work we consider the evolution and nucleosynthesis of low-mass AGB stars. We provide an update of the NuGrid Set models, adopting the same general physics assumptions but using an updated convective-boundary mixing model accounting for the contribution from internal gravity waves. The combined data set includes the initial masses Mzams/Msun = 2, 3 for Z = 0.03, 0.02, 0.01. These models are computed with the MESA stellar code and the evolution is followed up to the end of the AGB phase. The nucleosynthesis was calculated for all isotopes in post-processing with the NuGrid mppnp code. The convective boundary mixing model leads to the formation of a 13C-pocket three times wider compared to the one obtained in the previous set of models, bringing the simulation results now in closer agreement with observations. We also discuss the potential impact of other processes inducing mixing, like rotation, adopting parametric models compatible with theory and observations. Complete yield data tables, derived data products and online analytic data access are provided.
△ Less
Submitted 5 June, 2019;
originally announced June 2019.
-
Constraining transport of angular momentum in stars: Combining asteroseismic observations of core helium burning stars and white dwarfs
Authors:
J. W. den Hartogh,
P. Eggenberger,
R. Hirschi
Abstract:
Transport of angular momentum has been a challenging topic within the stellar evolution community, even more since the recent asteroseismic surveys. All published studies on rotation using asteroseismic observations show a discrepancy between the observed and calculated rotation rates, indicating there is an undetermined process of angular momentum transport active in these stars. We aim to constr…
▽ More
Transport of angular momentum has been a challenging topic within the stellar evolution community, even more since the recent asteroseismic surveys. All published studies on rotation using asteroseismic observations show a discrepancy between the observed and calculated rotation rates, indicating there is an undetermined process of angular momentum transport active in these stars. We aim to constrain the efficiency of this process by investigating rotation rates of 2.5 M$_{\odot}$ stars. First, we investigated whether the Tayler-Spruit dynamo could be responsible for the extra transport of angular momentum for stars with an initial mass of 2.5 M$_{\odot}$. Then, by computing rotating models including a constant additional artificial viscosity, we determined the efficiency of the missing process of angular momentum transport by comparing the models to the asteroseismic observations of core helium burning stars. Parameter studies were performed to investigate the effect of the stellar evolution code used, initial mass, and evolutionary stage. We evolved our models into the white dwarf phase, and provide a comparison to white dwarf rotation rates. The Tayler-Spruit dynamo is unable to provide enough transport of angular momentum to reach the observed values of the core helium burning stars investigated in this paper. We find that a value for the additional artificial viscosity $ν_{\rm{add}}$ around 10$^7$ cm$^2$ s$^{-1}$ provides enough transport of angular momentum. However, the rotational period of these models is too high in the white dwarf phase to match the white dwarf observations. From this comparison we infer that the efficiency of the missing process must decrease during the core helium burning phase. When excluding the $ν_{\rm{add}}$ during core helium burning phase, we can match the rotational periods of both the core helium burning stars and white dwarfs.
△ Less
Submitted 12 February, 2019;
originally announced February 2019.
-
Uncertainties in s-process nucleosynthesis in low mass stars determined from Monte Carlo variations
Authors:
G. Cescutti,
R. Hirschi,
N. Nishimura,
J. W. den Hartogh,
T. Rauscher,
A. St. J. Murphy,
S. Cristallo
Abstract:
The main s-process taking place in low mass stars produces about half of the elements heavier than iron. It is therefore very important to determine the importance and impact of nuclear physics uncertainties on this process. We have performed extensive nuclear reaction network calculations using individual and temperature-dependent uncertainties for reactions involving elements heavier than iron,…
▽ More
The main s-process taking place in low mass stars produces about half of the elements heavier than iron. It is therefore very important to determine the importance and impact of nuclear physics uncertainties on this process. We have performed extensive nuclear reaction network calculations using individual and temperature-dependent uncertainties for reactions involving elements heavier than iron, within a Monte Carlo framework. Using this technique, we determined the uncertainty in the main s-process abundance predictions due to nuclear uncertainties link to weak interactions and neutron captures on elements heavier than iron. We also identified the key nuclear reactions dominating these uncertainties. We found that $β$-decay rate uncertainties affect only a few nuclides near s-process branchings, whereas most of the uncertainty in the final abundances is caused by uncertainties in neutron capture rates, either directly producing or destroying the nuclide of interest. Combined total nuclear uncertainties due to reactions on heavy elements are in general small (less than 50%). Three key reactions, nevertheless, stand out because they significantly affect the uncertainties of a large number of nuclides. These are $^{56}$Fe(n,$γ$), $^{64}$Ni(n,$γ$), and $^{138}$Ba(n,$γ$). We discuss the prospect of reducing uncertainties in the key reactions identified in this study with future experiments.
△ Less
Submitted 3 May, 2018;
originally announced May 2018.
-
The s-process nucleosynthesis: impact of the uncertainties in the nuclear physics determined by Monte Carlo variations
Authors:
G. Cescutti,
N. Nishimura,
R. Hirschi,
T. Rauscher,
J. W. den Hartogh,
A. St. J. Murphy
Abstract:
We investigated the impact of uncertainties in neutron-capture and weak reactions (on heavy elements) on the s-process nucleosynthesis in low-mass stars and massive stars using a Monte-Carlo based approach. We performed extensive nuclear reaction network calculations that include newly evaluated temperature-dependent upper and lower limits for the individual reaction rates. We found beta-decay rat…
▽ More
We investigated the impact of uncertainties in neutron-capture and weak reactions (on heavy elements) on the s-process nucleosynthesis in low-mass stars and massive stars using a Monte-Carlo based approach. We performed extensive nuclear reaction network calculations that include newly evaluated temperature-dependent upper and lower limits for the individual reaction rates. We found beta-decay rate uncertainties affect only a few nuclei near s-process branchings, whereas most of the uncertainty in the final abundances is caused by uncertainties in the neutron capture rates. We suggest a list of uncertain rates as candidates for improved measurement by future experiments.
△ Less
Submitted 2 August, 2017;
originally announced August 2017.
-
Constraining the efficiency of angular momentum transport with asteroseismology of red giants: the effect of stellar mass
Authors:
P. Eggenberger,
N. Lagarde,
A. Miglio,
J. Montalbán,
S. Ekström,
C. Georgy,
G. Meynet,
S. Salmon,
T. Ceillier,
R. A. García,
S. Mathis,
S. Deheuvels,
A. Maeder,
J. W. den Hartogh,
R. Hirschi
Abstract:
Context: Constraints on the internal rotation of red giants are now available thanks to asteroseismic observations. Preliminary comparisons with rotating stellar models indicate that an undetermined additional process for the internal transport of angular momentum is required in addition to purely hydrodynamic processes. Aims: We investigate how asteroseismic measurements of red giants can help us…
▽ More
Context: Constraints on the internal rotation of red giants are now available thanks to asteroseismic observations. Preliminary comparisons with rotating stellar models indicate that an undetermined additional process for the internal transport of angular momentum is required in addition to purely hydrodynamic processes. Aims: We investigate how asteroseismic measurements of red giants can help us characterize the additional transport mechanism. Methods: We first determine the efficiency of the missing transport mechanism for the low-mass red giant KIC 7341231 by computing rotating models that include an additional viscosity corresponding to this process. We then discuss the change in the efficiency of this transport of angular momentum with the mass, metallicity and evolutionary stage. Results: In the case of the low-mass red giant KIC 7341231, we find that the viscosity corresponding to the additional mechanism is constrained to the range 1 x 10^3 - 1.3 x 10^4 cm^2/s. This constraint on the efficiency of the unknown additional transport mechanism during the post-main sequence is obtained independently of any specific assumption about the modelling of rotational effects during the pre-main sequence and the main sequence (in particular, the braking of the surface by magnetized winds and the efficiency of the internal transport of angular momentum before the post-main-sequence phase). When we assume that the additional transport mechanism is at work during the whole evolution of the star together with a solar-calibrated braking of the surface by magnetized winds, the range of nu_add is reduced to 1 - 4 x 10^3 cm^2/s. In addition to being sensitive to the evolutionary stage of the star, we show that the efficiency of the unknown process for internal transport of angular momentum increases with the stellar mass.
△ Less
Submitted 13 December, 2016;
originally announced December 2016.
-
Application of a Theory and Simulation based Convective Boundary Mixing model for AGB Star Evolution and Nucleosynthesis
Authors:
U. Battino,
M. Pignatari,
C. Ritter,
F. Herwig,
P. Denisenkov,
J. W. Den Hartogh,
R. Trappitsch,
R. Hirschi,
B. Freytag,
F. Thielemann,
B. Paxton
Abstract:
The $s$-process nucleosynthesis in Asymptotic Giant Branch (AGB) stars depends on the modeling of convective boundaries. We present models and s-process simulations that adopt a treatment of convective boundaries based on the results of hydrodynamic simulations and on the theory of mixing due to gravity waves in the vicinity of convective boundaries. Hydrodynamics simulations suggest the presence…
▽ More
The $s$-process nucleosynthesis in Asymptotic Giant Branch (AGB) stars depends on the modeling of convective boundaries. We present models and s-process simulations that adopt a treatment of convective boundaries based on the results of hydrodynamic simulations and on the theory of mixing due to gravity waves in the vicinity of convective boundaries. Hydrodynamics simulations suggest the presence of convective boundary mixing (CBM) at the bottom of the thermal pulse-driven convective zone. Similarly, convection-induced mixing processes are proposed for the mixing below the convective envelope during third dredge-up where the 13C pocket for the s process in AGB stars forms. In this work we apply a CBM model motivated by simulations and theory to models with initial mass $M = 2$ and $M = 3M_\odot$, and with initial metal content Z = 0.01 and Z = 0.02. As reported previously, the He-intershell abundance of 12C and 16O are increased by CBM at the bottom of pulse-driven convection zone. This mixing is affecting the $^{22}Ne(α,n)^{25}Mg$ activation and the s-process effciency in the 13C-pocket. In our model CBM at the bottom of the convective envelope during the third dredgeup represents gravity wave mixing. We take further into account that hydrodynamic simulations indicate a declining mixing efficiency already about a pressure scale height from the convective boundaries, compared to mixing-length theory. We obtain the formation of the 13C-pocket with a mass of $\approx 10^{-4}M_\odot$. The final $s$-process abundances are characterized by 0.36 < [s=Fe] < 0.78 and the heavy-to-light s-process ratio is 0.23 < [hs=ls] < 0.45. Finally, we compare our results with stellar observations, pre-solar grain measurements and previous work.
△ Less
Submitted 19 May, 2016;
originally announced May 2016.