Showing 1–45 of 45 results for author: Glasse, A

The MIRI/MRS Library I. Empirically correcting detector charge migration in unresolved sources

Authors: Danny Gasman, Ioannis Argyriou, Jane E. Morrison, David R. Law, Alistair Glasse, Karl D. Gordon, Patrick J. Kavanagh, Craig Lage, Polychronis Patapis, G. C. Sloan

Abstract: The JWST has been collecting scientific data for over two years now. Scientists are now looking deeper into the data, which introduces the need to correct known systematic effects. Important limiting factors for the MIRI/MRS are the pointing accuracy, non-linearity, detector charge migration, detector scattering, the accuracy of the PSF model, and the complex interplay between these. The Cycle 2 p… ▽ More The JWST has been collecting scientific data for over two years now. Scientists are now looking deeper into the data, which introduces the need to correct known systematic effects. Important limiting factors for the MIRI/MRS are the pointing accuracy, non-linearity, detector charge migration, detector scattering, the accuracy of the PSF model, and the complex interplay between these. The Cycle 2 programme 3779 proposed a 72-point intra-pixel dither raster of the calibration star 10-Lac. In this first work of the paper series, we aim to address the degeneracy between the non-linearity and BFE that affect the pixel voltage integration ramps of the MRS. Due to the low flux in the longer wavelengths, we only do this in the 4.9 to 11.7 micron region. We fitted the ramps per pixel and dither, in order to fold in the deviations from classical non-linearity that are caused by charge migration. The ramp shapes should be repeatable depending on the part of the PSF that is sampled. By doing so, we defined both a grid-based linearity correction, and an interpolated linearity correction. We find significant improvements compared to the uniform illumination assumption. The standard deviation on the pixel ramp residual non-linearity is between 70-90% smaller than the current standard pipeline when self-calibrating with the grid. We are able to interpolate these coefficients to apply to any unresolved source not on the grid points, resulting in an up to 70% smaller standard deviation on the residual deviation from linearity. The FWHM is up to 20% narrower. The depth of the fringes is now consistent up the ramp. Pointing-specific linearity corrections allow us to fix the systematic deviation in the slopes. We demonstrated this for unresolved sources. The discovered trends with PSF sampling suggest that, we may be able to model ramps for spatially extended and resolved illumination as well. △ Less

Submitted 16 June, 2024; originally announced June 2024.

Comments: 18 pages, 20 figures, Accepted for publication in A&A

JWST MIRI Flight Performance: Imaging

Authors: Dan Dicken, Macarena García Marín, Irene Shivaei, Pierre Guillard, Mattia Libralato, Alistair Glasse, Karl D. Gordon, Christophe Cossou, Patrick Kavanagh, Tea Temim, Nicolas Flagey, Pamela Klaassen, George H. Rieke, Gillian Wright, Stacey Alberts, Ruyman Azzollini, Javier Álvarez-Márquez, Patrice Bouchet, Stacey Bright, Misty Cracraft, Alain Coulais, Ors Hunor Detre, Mike Engesser, Ori D. Fox, Andras Gaspar , et al. (15 additional authors not shown)

Abstract: The Mid-Infrared Instrument (MIRI) aboard the James Webb Space Telescope (JWST) provides the observatory with a huge advance in mid-infrared imaging and spectroscopy covering the wavelength range of 5 to 28 microns. This paper describes the performance and characteristics of the MIRI imager as understood during observatory commissioning activities, and through its first year of science operations.… ▽ More The Mid-Infrared Instrument (MIRI) aboard the James Webb Space Telescope (JWST) provides the observatory with a huge advance in mid-infrared imaging and spectroscopy covering the wavelength range of 5 to 28 microns. This paper describes the performance and characteristics of the MIRI imager as understood during observatory commissioning activities, and through its first year of science operations. We discuss the measurements and results of the imager's point spread function, flux calibration, background, distortion and flat fields as well as results pertaining to best observing practices for MIRI imaging, and discuss known imaging artefacts that may be seen during or after data processing. Overall, we show that the MIRI imager has met or exceeded all its pre-flight requirements, and we expect it to make a significant contribution to mid-infrared science for the astronomy community for years to come. △ Less

Submitted 25 March, 2024; originally announced March 2024.

Emission lines due to ionizing radiation from a compact object in the remnant of Supernova 1987A

Authors: C. Fransson, M. J. Barlow, P. J. Kavanagh, J. Larsson, O. C. Jones, B. Sargent, M. Meixner, P. Bouchet, T. Temim, G. S. Wright, J. A. D. L. Blommaert, N. Habel, A. S. Hirschauer, J. Hjorth, L. Lenkić, T. Tikkanen, R. Wesson, A. Coulais, O. D. Fox, R. Gastaud, A. Glasse, J. Jaspers, O. Krause, R. M. Lau, O. Nayak , et al. (9 additional authors not shown)

Abstract: The nearby Supernova 1987A was accompanied by a burst of neutrino emission, which indicates that a compact object (a neutron star or black hole) was formed in the explosion. There has been no direct observation of this compact object. In this work, we observe the supernova remnant with JWST spectroscopy finding narrow infrared emission lines of argon and sulphur. The line emission is spatially unr… ▽ More The nearby Supernova 1987A was accompanied by a burst of neutrino emission, which indicates that a compact object (a neutron star or black hole) was formed in the explosion. There has been no direct observation of this compact object. In this work, we observe the supernova remnant with JWST spectroscopy finding narrow infrared emission lines of argon and sulphur. The line emission is spatially unresolved and blueshifted in velocity relative to the supernova rest frame. We interpret the lines as gas illuminated by a source of ionizing photons located close to the center of the expanding ejecta. Photoionization models show that the line ratios are consistent with ionization by a cooling neutron star or pulsar wind nebula. The velocity shift could be evidence for a neutron star natal kick. △ Less

Submitted 7 March, 2024; originally announced March 2024.

Comments: Authors version of manuscript published in Science on 22 Feb 2024

Journal ref: SCIENCE 22 Feb 2024 Vol 383, Issue 6685 pp. 898-903

JWST MIRI Imager Observations of Supernova SN 1987A

Authors: P. Bouchet, R. Gastaud, A. Coulais, M. J. Barlow, C. Fransson, P. J. Kavanagh, J. Larsson, T. Temim, O. C. Jones, A. S. Hirschauer, T. Tikkanen, J. A. D. L. Blommaert, O. D. Fox, A. Glasse, N. Habel, J. Hjorth, J. Jaspers, O. Krause, R. M. Lau, L. Lenkić, M. Meixner, O. Nayak, A. Rest, B. Sargent, R. Wesson , et al. (9 additional authors not shown)

Abstract: There exist very few mid-infrared (IR) observations of supernovae (SNe) in general. Therefore, SN 1987A, the closest visible SN in 400 years, gives us the opportunity to explore the mid-IR properties of SNe, the dust in their ejecta and surrounding medium, and to witness the birth of a SN remnant (SNR). The James Webb Space Telescope (JWST), with its high spatial resolution and extreme sensitivity… ▽ More There exist very few mid-infrared (IR) observations of supernovae (SNe) in general. Therefore, SN 1987A, the closest visible SN in 400 years, gives us the opportunity to explore the mid-IR properties of SNe, the dust in their ejecta and surrounding medium, and to witness the birth of a SN remnant (SNR). The James Webb Space Telescope (JWST), with its high spatial resolution and extreme sensitivity, gives a new view on these issues. We report on the first imaging observations obtained with the Mid-InfraRed Instrument (MIRI). We build temperature maps and discuss the morphology of the nascent SNR. Our results show that the temperatures in the equatorial ring (ER) are quite non-uniform. This could be due to dust destruction in some parts of the ring, as had been assumed in some previous works. We show that the IR emission extends beyond the ER, illustrating the fact that the shock wave has now passed through this ring to affect the circumstellar medium on a larger scale. Finally, while sub-mm Atacama Large Millimeter Array (ALMA) observations have hinted at the location of the compact remnant of SN 1987A, we note that our MIRI data have found no such evidence. △ Less

Submitted 21 February, 2024; originally announced February 2024.

Comments: 19 pages, 19 figures, 2 tables; Accepted for publication in the Astrophysical Journal (February 2, 2024)

SO$_2$, silicate clouds, but no CH$_4$ detected in a warm Neptune

Authors: Achrène Dyrek, Michiel Min, Leen Decin, Jeroen Bouwman, Nicolas Crouzet, Paul Mollière, Pierre-Olivier Lagage, Thomas Konings, Pascal Tremblin, Manuel Güdel, John Pye, Rens Waters, Thomas Henning, Bart Vandenbussche, Francisco Ardevol Martinez, Ioannis Argyriou, Elsa Ducrot, Linus Heinke, Gwenael Van Looveren, Olivier Absil, David Barrado, Pierre Baudoz, Anthony Boccaletti, Christophe Cossou, Alain Coulais , et al. (22 additional authors not shown)

Abstract: WASP-107b is a warm ($\sim$740 K) transiting planet with a Neptune-like mass of $\sim$30.5 $M_{\oplus}$ and Jupiter-like radius of $\sim$0.94 $R_{\rm J}$, whose extended atmosphere is eroding. Previous observations showed evidence for water vapour and a thick high-altitude condensate layer in WASP-107b's atmosphere. Recently, photochemically produced sulphur dioxide (SO$_2$) was detected in the at… ▽ More WASP-107b is a warm ($\sim$740 K) transiting planet with a Neptune-like mass of $\sim$30.5 $M_{\oplus}$ and Jupiter-like radius of $\sim$0.94 $R_{\rm J}$, whose extended atmosphere is eroding. Previous observations showed evidence for water vapour and a thick high-altitude condensate layer in WASP-107b's atmosphere. Recently, photochemically produced sulphur dioxide (SO$_2$) was detected in the atmosphere of a hot ($\sim$1,200 K) Saturn-mass planet from transmission spectroscopy near 4.05 $μ$m, but for temperatures below $\sim$1,000 K sulphur is predicted to preferably form sulphur allotropes instead of SO$_2$. Here we report the 9$σ$-detection of two fundamental vibration bands of SO$_2$, at 7.35 $μ$m and 8.69 $μ$m, in the transmission spectrum of WASP-107b using the Mid-Infrared Instrument (MIRI) of the JWST. This discovery establishes WASP-107b as the second irradiated exoplanet with confirmed photochemistry, extending the temperature range of exoplanets exhibiting detected photochemistry from $\sim$1,200 K down to $\sim$740 K. Additionally, our spectral analysis reveals the presence of silicate clouds, which are strongly favoured ($\sim$7$σ$) over simpler cloud setups. Furthermore, water is detected ($\sim$12$σ$), but methane is not. These findings provide evidence of disequilibrium chemistry and indicate a dynamically active atmosphere with a super-solar metallicity. △ Less

Submitted 21 November, 2023; originally announced November 2023.

15NH3 in the atmosphere of a cool brown dwarf

Authors: David Barrado, Paul Mollière, Polychronis Patapis, Michiel Min, Pascal Tremblin, Francisco Ardevol Martinez, Niall Whiteford, Malavika Vasist, Ioannis Argyriou, Matthias Samland, Pierre-Olivier Lagage, Leen Decin, Rens Waters, Thomas Henning, María Morales-Calderón, Manuel Guedel, Bart Vandenbussche, Olivier Absil, Pierre Baudoz, Anthony Boccaletti, Jeroen Bouwman, Christophe Cossou, Alain Coulais, Nicolas Crouzet, René Gastaud , et al. (18 additional authors not shown)

Abstract: Brown dwarfs serve as ideal laboratories for studying the atmospheres of giant exoplanets on wide orbits as the governing physical and chemical processes in them are nearly identical. Understanding the formation of gas giant planets is challenging, often involving the endeavour to link atmospheric abundance ratios, such as the carbon-to-oxygen (C/O) ratio, to formation scenarios. However, the comp… ▽ More Brown dwarfs serve as ideal laboratories for studying the atmospheres of giant exoplanets on wide orbits as the governing physical and chemical processes in them are nearly identical. Understanding the formation of gas giant planets is challenging, often involving the endeavour to link atmospheric abundance ratios, such as the carbon-to-oxygen (C/O) ratio, to formation scenarios. However, the complexity of planet formation requires additional tracers, as the unambiguous interpretation of the measured C/O ratio is fraught with complexity. Isotope ratios, such as deuterium-to-hydrogen and 14N/15N, offer a promising avenue to gain further insight into this formation process, mirroring their utility within the solar system. For exoplanets only a handful of constraints on 12C/13C exist, pointing to the accretion of 13C-rich ice from beyond the disks' CO iceline. Here we report on the mid-infrared detection of the 14NH3 and 15NH3 isotopologues in the atmosphere of a cool brown dwarf with an effective temperature of 380 K in a spectrum taken with the Mid-InfraRed Instrument of the James Webb Space Telescope. As expected, our results reveal a 14N/15N value consistent with star-like formation by gravitational collapse, demonstrating that this ratio can be accurately constrained. Since young stars and their planets should be more strongly enriched in the 15N isotope, we expect that 15NH3 will be detectable in a number of cold, wide-separation exoplanets. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Comments: Accepted by Nature. 28 pages, 7 figures, uses nature3.cls

Ejecta, Rings, and Dust in SN 1987A with JWST MIRI/MRS

Authors: O. C. Jones, P. J. Kavanagh, M. J. Barlow, T. Temim, C. Fransson, J. Larsson, J. A. D. L. Blommaert, M. Meixner, R. M. Lau, B. Sargent, P. Bouchet, J. Hjorth, G. S. Wright, A. Coulais, O. D. Fox, R. Gastaud, A. Glasse, N. Habel, A. S. Hirschauer, J. Jaspers, O. Krause, Lenkić, O. Nayak, A. Rest, T. Tikkanen , et al. (9 additional authors not shown)

Abstract: Supernova (SN) 1987A is the nearest supernova in $\sim$400 years. Using the {\em JWST} MIRI Medium Resolution Spectrograph, we spatially resolved the ejecta, equatorial ring (ER) and outer rings in the mid-infrared 12,927 days after the explosion. The spectra are rich in line and dust continuum emission, both in the ejecta and the ring. Broad emission lines (280-380~km~s$^{-1}$ FWHM) seen from all… ▽ More Supernova (SN) 1987A is the nearest supernova in $\sim$400 years. Using the {\em JWST} MIRI Medium Resolution Spectrograph, we spatially resolved the ejecta, equatorial ring (ER) and outer rings in the mid-infrared 12,927 days after the explosion. The spectra are rich in line and dust continuum emission, both in the ejecta and the ring. Broad emission lines (280-380~km~s$^{-1}$ FWHM) seen from all singly-ionized species originate from the expanding ER, with properties consistent with dense post-shock cooling gas. Narrower emission lines (100-170~km~s$^{-1}$ FWHM) are seen from species originating from a more extended lower-density component whose high ionization may have been produced by shocks progressing through the ER, or by the UV radiation pulse associated with the original supernova event. The asymmetric east-west dust emission in the ER has continued to fade, with constant temperature, signifying a reduction in dust mass. Small grains in the ER are preferentially destroyed, with larger grains from the progenitor surviving the transition from SN into SNR. The ER is fit with a single set of optical constants, eliminating the need for a secondary featureless hot dust component. We find several broad ejecta emission lines from [Ne~{\sc ii}], [Ar~{\sc ii}], [Fe~{\sc ii}], and [Ni~{\sc ii}]. With the exception of [Fe~{\sc ii}]~25.99$μ$m, these all originate from the ejecta close to the ring and are likely being excited by X-rays from the interaction. The [Fe~{\sc ii}]~5.34$μ$m to 25.99$μ$m line ratio indicates a temperature of only a few hundred K in the inner core, consistent with being powered by ${}^{44}$Ti decay. △ Less

Submitted 29 February, 2024; v1 submitted 13 July, 2023; originally announced July 2023.

Comments: 27 pages, 16 figures, 4 tables. Accepted ApJ

Geometric distortion and astrometric calibration of the JWST MIRI Medium Resolution Spectrometer

Authors: P. Patapis, I. Argyriou, D. R. Law, A. M. Glauser, A. Glasse, A. Labiano, J. Álvarez-Márquez, P. J. Kavanagh, D. Gasman, M. Mueller, K. Larson, B. Vandenbussche, P. Klaassen, P. Guillard, G. S. Wright

Abstract: The Medium-Resolution integral field Spectrometer (MRS) of MIRI on board JWST performs spectroscopy between 5 and 28~$μ$m. The optics of the MRS introduce substantial distortion, and this needs to be rectified in order to reconstruct the observed astrophysical scene. We use data from the JWST/MIRI commissioning and cycle 1 calibration phase, to derive the MRS geometric distortion and astrometric s… ▽ More The Medium-Resolution integral field Spectrometer (MRS) of MIRI on board JWST performs spectroscopy between 5 and 28~$μ$m. The optics of the MRS introduce substantial distortion, and this needs to be rectified in order to reconstruct the observed astrophysical scene. We use data from the JWST/MIRI commissioning and cycle 1 calibration phase, to derive the MRS geometric distortion and astrometric solution, a critical step in the calibration of MRS data. These solutions come in the form of transform matrices that map the detector pixels to spatial coordinates of a local MRS coordinate system called $α$/$β$, to the global JWST observatory coordinates V2/V3. For every MRS spectral band and each slice dispersed on the detector, the transform of detector pixels to $α$/$β$ is fit by a two-dimensional polynomial, using a raster of point source observations. A polynomial transform is used to map the coordinates from $α$/$β$ to V2/V3. We calibrated the distortion of all 198 discrete slices of the MIRI/MRS IFUs, and derived an updated Field of View (FoV) for each MRS spectral band. The precision of the distortion solution is estimated to be better than one tenth of a spatial resolution element, with a root mean square (rms) of 10 milli-arcsecond (mas) at 5 $μ$m, to 23 mas at 27 $μ$m. Finally we find that the wheel positioning repeatability causes an additional astrometric error of rms 30 mas. We have demonstrated the MRS astrometric calibration strategy and analysis enabling the calibration of MRS spectra, a critical step in the data pipeline especially for science with spatially resolved objects. The distortion calibration was folded into the JWST pipeline in Calibration Reference Data System (CRDS) context jwst\_1094.pmap. The distortion calibration precision meets the pre-launch requirement, and the estimated total astrometric uncertainty is 50 mas. △ Less

Submitted 3 July, 2023; originally announced July 2023.

Comments: 15 pages, 14 figures. Submitted to Astronomy & Astrophysics

The James Webb Space Telescope Mission

Authors: Jonathan P. Gardner, John C. Mather, Randy Abbott, James S. Abell, Mark Abernathy, Faith E. Abney, John G. Abraham, Roberto Abraham, Yasin M. Abul-Huda, Scott Acton, Cynthia K. Adams, Evan Adams, David S. Adler, Maarten Adriaensen, Jonathan Albert Aguilar, Mansoor Ahmed, Nasif S. Ahmed, Tanjira Ahmed, Rüdeger Albat, Loïc Albert, Stacey Alberts, David Aldridge, Mary Marsha Allen, Shaune S. Allen, Martin Altenburg , et al. (983 additional authors not shown)

Abstract: Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least $4m$. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the $6.5m$ James Webb Space Telescope. A generation of astrono… ▽ More Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least $4m$. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the $6.5m$ James Webb Space Telescope. A generation of astronomers will celebrate their accomplishments for the life of the mission, potentially as long as 20 years, and beyond. This report and the scientific discoveries that follow are extended thank-you notes to the 20,000 team members. The telescope is working perfectly, with much better image quality than expected. In this and accompanying papers, we give a brief history, describe the observatory, outline its objectives and current observing program, and discuss the inventions and people who made it possible. We cite detailed reports on the design and the measured performance on orbit. △ Less

Submitted 10 April, 2023; originally announced April 2023.

Comments: Accepted by PASP for the special issue on The James Webb Space Telescope Overview, 29 pages, 4 figures

JWST MIRI flight performance: The Medium-Resolution Spectrometer

Authors: Ioannis Argyriou, Alistair Glasse, David R. Law, Alvaro Labiano, Javier Álvarez-Márquez, Polychronis Patapis, Patrick J. Kavanagh, Danny Gasman, Michael Mueller, Kirsten Larson, Bart Vandenbussche, Adrian M. Glauser, Pierre Royer, Daniel Dicken, Jake Harkett, Beth A. Sargent, Michael Engesser, Olivia C. Jones, Sarah Kendrew, Alberto Noriega-Crespo, Bernhard Brandl, George H. Rieke, Gillian S. Wright, David Lee, Martyn Wells

Abstract: The Medium-Resolution Spectrometer (MRS) provides one of the four operating modes of the Mid-Infrared Instrument (MIRI) on board the James Webb Space Telescope (JWST). The MRS is an integral field spectrometer, measuring the spatial and spectral distributions of light across the 5-28 $μm$ wavelength range with a spectral resolving power between 3700-1300. We present the MRS's optical, spectral, an… ▽ More The Medium-Resolution Spectrometer (MRS) provides one of the four operating modes of the Mid-Infrared Instrument (MIRI) on board the James Webb Space Telescope (JWST). The MRS is an integral field spectrometer, measuring the spatial and spectral distributions of light across the 5-28 $μm$ wavelength range with a spectral resolving power between 3700-1300. We present the MRS's optical, spectral, and spectro-photometric performance, as achieved in flight, and we report on the effects that limit the instrument's ultimate sensitivity. The MRS flight performance has been quantified using observations of stars, planetary nebulae, and planets in our Solar System. The precision and accuracy of this calibration was checked against celestial calibrators with well-known flux levels and spectral features. We find that the MRS geometric calibration has a distortion solution accuracy relative to the commanded position of 8 mas at 5 $μm$ and 23 mas at 28 $μm$. The wavelength calibration is accurate to within 9 km/sec at 5 $μm$ and 27 km/sec at 28 $μm$. The uncertainty in the absolute spectro-photometric calibration accuracy was estimated at 5.6 +- 0.7 %. The MIRI calibration pipeline is able to suppress the amplitude of spectral fringes to below 1.5 % for both extended and point sources across the entire wavelength range. The MRS point spread function (PSF) is 60 % broader than the diffraction limit along its long axis at 5 $μm$ and is 15 % broader at 28 $μm$. The MRS flight performance is found to be better than prelaunch expectations. The MRS is one of the most subscribed observing modes of JWST and is yielding many high-profile publications. It is currently humanity's most powerful instrument for measuring the mid-infrared spectra of celestial sources and is expected to continue as such for many years to come. △ Less

Submitted 14 June, 2023; v1 submitted 23 March, 2023; originally announced March 2023.

Comments: 16 pages, 21 figures

Journal ref: A&A 675, A111 (2023)

Retrieval study of cool, directly imaged exoplanet 51 Eri b

Authors: Niall Whiteford, Alistair Glasse, Katy L. Chubb, Daniel Kitzmann, Shrishmoy Ray, Mark W. Phillips, Beth A. Biller, Paul I. Palmer, Ken Rice, Ingo P. Waldmann, Quentin Changeat, Nour Skaf, Jason Wang, Billy Edwards, Ahmed Al-Refaie

Abstract: Retrieval methods are a powerful analysis technique for modelling exoplanetary atmospheres by estimating the bulk physical and chemical properties that combine in a forward model to best-fit an observed spectrum, and they are increasingly being applied to observations of directly-imaged exoplanets. We have adapted TauREx3, the Bayesian retrieval suite, for the analysis of near-infrared spectrophot… ▽ More Retrieval methods are a powerful analysis technique for modelling exoplanetary atmospheres by estimating the bulk physical and chemical properties that combine in a forward model to best-fit an observed spectrum, and they are increasingly being applied to observations of directly-imaged exoplanets. We have adapted TauREx3, the Bayesian retrieval suite, for the analysis of near-infrared spectrophotometry from directly-imaged gas giant exoplanets and brown dwarfs. We demonstrate TauREx3's applicability to sub-stellar atmospheres by presenting results for brown dwarf benchmark GJ 570D which are consistent with previous retrieval studies, whilst also exhibiting systematic biases associated with the presence of alkali lines. We also present results for the cool exoplanet 51 Eri b, the first application of a free chemistry retrieval analysis to this object, using spectroscopic observations from GPI and SPHERE. While our retrieval analysis is able to explain spectroscopic and photometric observations without employing cloud extinction, we conclude this may be a result of employing a flexible temperature-pressure profile which is able to mimic the presence of clouds. We present Bayesian evidence for an ammonia detection with a 2.7$σ$ confidence, the first indication of ammonia in an exoplanetary atmosphere. This is consistent with this molecule being present in brown dwarfs of a similar spectral type. We demonstrate the chemical similarities between 51 Eri b and GJ 570D in relation to their retrieved molecular abundances. Finally, we show that overall retrieval conclusions for 51 Eri b can vary when employing different spectral data and modelling components, such as temperature-pressure and cloud structures. △ Less

Submitted 15 February, 2023; originally announced February 2023.

JWST NIRSpec observations of Supernova 1987A -- from the inner ejecta to the reverse shock

Authors: J. Larsson, C. Fransson, B. Sargent, O. C. Jones, M. J. Barlow, P. Bouchet, M. Meixner, J. A. D. L. Blommaert, A. Coulais, O. D. Fox, R. Gastaud, A. Glasse, N. Habel, A. S. Hirschauer, J. Hjorth, J. Jaspers, P. J. Kavanagh, O. Krause, R. M. Lau, L. Lenkic, O. Nayak, A. Rest, T. Temim, T. Tikkanen, R. Wesson , et al. (1 additional authors not shown)

Abstract: We present initial results from JWST NIRSpec integral field unit observations of the nearby Supernova (SN) 1987A. The observations provide the first spatially-resolved spectroscopy of the ejecta and equatorial ring (ER) over the 1-5 μm range. We construct 3D emissivity maps of the [Fe I] 1.443 μm line from the inner ejecta and the He I 1.083 μm line from the reverse shock (RS), where the former pr… ▽ More We present initial results from JWST NIRSpec integral field unit observations of the nearby Supernova (SN) 1987A. The observations provide the first spatially-resolved spectroscopy of the ejecta and equatorial ring (ER) over the 1-5 μm range. We construct 3D emissivity maps of the [Fe I] 1.443 μm line from the inner ejecta and the He I 1.083 μm line from the reverse shock (RS), where the former probes the explosion geometry and the latter traces the structure of the circumstellar medium. We also present a model for the integrated spectrum of the ejecta. The [Fe I] 3D map reveals a highly-asymmetric morphology resembling a broken dipole, dominated by two large clumps with velocities of ~2300 km/s. We also find evidence that the Fe-rich inner ejecta have started to interact with the RS. The RS surface traced by the He I line extends from just inside the ER to higher latitudes on both sides of the ER with a half-opening angle ~45 degrees, forming a bubble-like structure. The spectral model for the ejecta allows us to identify the many emission lines, including numerous H_2 lines. We find that the H_2 is most likely excited by far-UV emission, while the metal lines ratios are consistent with a combination of collisional excitation and recombination in the low-temperature ejecta. We also find several high-ionization coronal lines from the ER, requiring a temperature > 2 \times 10^6 K. △ Less

Submitted 16 May, 2023; v1 submitted 7 February, 2023; originally announced February 2023.

Comments: Accepted for publication in ApJL

JWST MIRI/MRS in-flight absolute flux calibration and tailored fringe correction for unresolved sources

Authors: D. Gasman, I. Argyriou, G. C. Sloan, B. Aringer, J. Álvarez-Márquez, O. Fox, A. Glasse, A. Glauser, O. C. Jones, K. Justtanont, P. J. Kavanagh, P. Klaassen, A. Labiano, K. Larson, D. R. Law, M. Mueller, O. Nayak, A. Noriega-Crespo, P. Patapis, P. Royer, B. Vandenbussche

Abstract: The MRS is one of the four observing modes of JWST/MIRI. Using JWST in-flight data of unresolved (point) sources, we can derive the MRS absolute spectral response function (ASRF) starting from raw data. Spectral fringing plays a critical role in the derivation and interpretation of the MRS ASRF. In this paper, we present an alternative way to calibrate the data. Firstly, we aim to derive a fringe… ▽ More The MRS is one of the four observing modes of JWST/MIRI. Using JWST in-flight data of unresolved (point) sources, we can derive the MRS absolute spectral response function (ASRF) starting from raw data. Spectral fringing plays a critical role in the derivation and interpretation of the MRS ASRF. In this paper, we present an alternative way to calibrate the data. Firstly, we aim to derive a fringe correction that accounts for the dependence of the fringe properties on the MIRI pupil illumination and detector pixel sampling of the point spread function. Secondly, we aim to derive the MRS ASRF using an absolute flux calibrator observed across the full 5 to 28 $μ$m wavelength range of the MRS. Thirdly, we aim to apply the new ASRF to the spectrum of a G dwarf and compare with the output of the JWST/MIRI default data reduction pipeline. Finally, we examine the impact of the different fringe corrections on the detectability of molecular features in the G dwarf and K giant. The absolute flux calibrator HD 163466 (A-star) is used to derive tailored point source fringe flats at each of the default dither locations of the MRS. The fringe-corrected point source integrated spectrum of HD 163466 is used to derive the MRS ASRF using a theoretical model for the stellar continuum. A cross-correlation is run to quantify the uncertainty on the detection of CO, SiO, and OH in the K giant and CO in the G dwarf for different fringe corrections. The point-source-tailored fringe correction and ASRF are found to perform at the same level as the current corrections, beating down the fringe contrast to the sub-percent level, whilst mitigating the alteration of real molecular features. The same tailored solutions can be applied to other MRS unresolved targets. A pointing repeatability issue in the MRS limits the effectiveness of the tailored fringe flats is at short wavelengths. △ Less

Submitted 15 March, 2023; v1 submitted 7 December, 2022; originally announced December 2022.

Comments: 17 pages, 15 figures, updated to accepted version (results did not change)

Journal ref: A&A 673, A102 (2023)

Spectroscopic time series performance of the Mid-Infrared Instrument on the JWST

Authors: Jeroen Bouwman, Sarah Kendrew, Thomas P. Greene, Taylor J. Bell, Pierre-Olivier Lagage, Juergen Schreiber, Daniel Dicken, G. C. Sloan, Nestor Espinoza, Silvia Scheithauer, Alain Coulais, Ori D. Fox, Rene Gastaud, Adrian M. Glauser, Olivia C. Jones, Alvaro Labiano, Fred Lahuis, Jane E. Morrison, Katherine Murray, Michael Mueller, Omnarayani Nayak, Gillian S. Wright, Alistair Glasse, George Rieke

Abstract: We present here the first ever mid-infrared spectroscopic time series observation of the transiting exoplanet \object{L 168-9 b} with the Mid-Infrared Instrument (MIRI) on the James Webb Space Telescope. The data were obtained as part of the MIRI commissioning activities, to characterize the performance of the Low Resolution Spectroscopy (LRS) mode for these challenging observations. To assess the… ▽ More We present here the first ever mid-infrared spectroscopic time series observation of the transiting exoplanet \object{L 168-9 b} with the Mid-Infrared Instrument (MIRI) on the James Webb Space Telescope. The data were obtained as part of the MIRI commissioning activities, to characterize the performance of the Low Resolution Spectroscopy (LRS) mode for these challenging observations. To assess the MIRI LRS performance, we performed two independent analyses of the data. We find that with a single transit observation we reached a spectro-photometric precision of $\sim$50 ppm in the 7-8 \micron range at R=50, consistent with $\sim$25 ppm systematic noise. The derived band averaged transit depth is 524 $\pm$ 15 ppm and 547 $\pm$ 13 ppm for the two applied analysis methods, respectively, recovering the known transit depth to within 1 $σ$. The measured noise in the planet's transmission spectrum is approximately 15-20 \% higher than random noise simulations over wavelengths $6.8 \lesssim λ\lesssim 11$ $μ$m. \added{We observed an larger excess noise at the shortest wavelengths of up to a factor of two, for which possible causes are discussed.} This performance was achieved with limited in-flight calibration data, demonstrating the future potential of MIRI for the characterization of exoplanet atmospheres. △ Less

Submitted 7 March, 2023; v1 submitted 29 November, 2022; originally announced November 2022.

Comments: Accepted for publishing in PASP, 21 pages, 10 figures

How dark the sky: the JWST backgrounds

Authors: Jane R. Rigby, Paul A. Lightsey, Macarena García Marín, Charles W. Bowers, Erin C. Smith, Alistair Glasse, Michael W. McElwain, George H. Rieke, Ranga-Ram Chary, Xiang Liu, Mark Clampin, Wayne Kinzel, Vicki Laidler, Kimberly I. Mehalick, Alberto Noriega-Crespo, Irene Shivaei, Christopher Stark, Tea Temim, Zongying Wei, Chris J. Willott

Abstract: We describe the sources of stray light and thermal background that affect JWST observations, report actual backgrounds as measured from commissioning and early-science observations, compare these background levels to prelaunch predictions, estimate the impact of the backgrounds on science performance, and explore how the backgrounds probe the achieved configuration of the deployed observatory. We… ▽ More We describe the sources of stray light and thermal background that affect JWST observations, report actual backgrounds as measured from commissioning and early-science observations, compare these background levels to prelaunch predictions, estimate the impact of the backgrounds on science performance, and explore how the backgrounds probe the achieved configuration of the deployed observatory. We find that for almost all applications, the observatory is limited by the irreducible astrophysical backgrounds, rather than scattered stray light and thermal self-emission, for all wavelengths lambda < 12.5 micron, thus meeting the level 1 requirement. This result was not assured given the open architecture and thermal challenges of JWST, and it is the result of meticulous attention to stray light and thermal issues in the design, construction, integration, and test phases. From background considerations alone, JWST will require less integration time in the near-infrared compared to a system that just met the stray-light requirements; as such, JWST will be even more powerful than expected for deep imaging at 1-5 micron. In the mid-infrared, the measured thermal backgrounds closely match prelaunch predictions. The background near 10 micron is slightly higher than predicted before launch, but the impact on observations is mitigated by the excellent throughput of MIRI, such that instrument sensitivity will be as good as expected prelaunch. These measured background levels are fully compatible with JWST's science goals and the Cycle 1 science program currently underway. △ Less

Submitted 18 May, 2023; v1 submitted 17 November, 2022; originally announced November 2022.

Comments: Published as part of the "JWST Overview" special issue of PASP. 18 pages, 9 figures

Journal ref: PASP, 2023, 1046, 048002

JWST/MIRI coronagraphic performances as measured on-sky

Authors: A. Boccaletti, C. Cossou, P. Baudoz, P. O. Lagage, D. Dicken, A. Glasse, D. C. Hines, J. Aguilar, O. Detre, B. Nickson, A. Noriega-Crespo, A. Gáspár, A. Labiano, C. Stark, D. Rouan, J. M. Reess, G. S. Wright, G. Rieke, M. Garcia Marin

Abstract: Characterization of directly imaged exoplanets is one of the most eagerly anticipated science functions of the James Webb Space Telescope. MIRI, the mid-IR instrument has the capability to provide unique spatially resolved photometric data points in a spectral range never achieved so far for such objects. We aim to present the very first on-sky contrast measurements of the MIRI's coronagraphs. In… ▽ More Characterization of directly imaged exoplanets is one of the most eagerly anticipated science functions of the James Webb Space Telescope. MIRI, the mid-IR instrument has the capability to provide unique spatially resolved photometric data points in a spectral range never achieved so far for such objects. We aim to present the very first on-sky contrast measurements of the MIRI's coronagraphs. In addition to a classical Lyot coronagraph at the longest wavelength, this observing mode implements the concept of the four quadrant phase mask for the very first time in a space telescope. We observed single stars together with a series of reference stars to measure raw contrasts as they are delivered on the detector, as well as reference subtracted contrasts. MIRI's coronagraphs achieve raw contrasts greater than $10^3$ at the smallest angular separations (within $1''$) and about $10^5$ further out (beyond $5\sim6''$). Subtracting the residual diffracted light left unattenuated by the coronagraph has the potential to bring the final contrast down to the background and detector limited noise floor at most angular separations (a few times $10^4$ at less than $1''$). MIRI coronagraphs behave as expected from simulations. In particular the raw contrasts for all four coronagraphs are fully consistent with the diffractive model. Contrasts obtained with subtracting reference stars also meet expectations and are fully demonstrated for two four quadrant phase masks (F1065C and F1140C). The worst contrast, measured at F1550C, is very likely due to a variation of the phase aberrations at the primary mirror during the observations, and not an issue of the coronagraph itself. We did not perform reference star subtraction with the Lyot mask at F2300C, but we anticipate that it would bring the contrast down to the noise floor. △ Less

Submitted 22 July, 2022; originally announced July 2022.

Comments: submitted to A&A

Journal ref: A&A 667, A165 (2022)

The Science Performance of JWST as Characterized in Commissioning

Authors: Jane Rigby, Marshall Perrin, Michael McElwain, Randy Kimble, Scott Friedman, Matt Lallo, René Doyon, Lee Feinberg, Pierre Ferruit, Alistair Glasse, Marcia Rieke, George Rieke, Gillian Wright, Chris Willott, Knicole Colon, Stefanie Milam, Susan Neff, Christopher Stark, Jeff Valenti, Jim Abell, Faith Abney, Yasin Abul-Huda, D. Scott Acton, Evan Adams, David Adler , et al. (601 additional authors not shown)

Abstract: This paper characterizes the actual science performance of the James Webb Space Telescope (JWST), as determined from the six month commissioning period. We summarize the performance of the spacecraft, telescope, science instruments, and ground system, with an emphasis on differences from pre-launch expectations. Commissioning has made clear that JWST is fully capable of achieving the discoveries f… ▽ More This paper characterizes the actual science performance of the James Webb Space Telescope (JWST), as determined from the six month commissioning period. We summarize the performance of the spacecraft, telescope, science instruments, and ground system, with an emphasis on differences from pre-launch expectations. Commissioning has made clear that JWST is fully capable of achieving the discoveries for which it was built. Moreover, almost across the board, the science performance of JWST is better than expected; in most cases, JWST will go deeper faster than expected. The telescope and instrument suite have demonstrated the sensitivity, stability, image quality, and spectral range that are necessary to transform our understanding of the cosmos through observations spanning from near-earth asteroids to the most distant galaxies. △ Less

Submitted 10 April, 2023; v1 submitted 12 July, 2022; originally announced July 2022.

Comments: 5th version as accepted to PASP; 31 pages, 18 figures; https://iopscience.iop.org/article/10.1088/1538-3873/acb293

Journal ref: PASP 135 048001 (2023)

Direct emission spectroscopy of exoplanets with the medium resolution imaging spectrometer on board JWST MIRI: I. Molecular map** and sensitivity to instrumental effects

Authors: P. Patapis, E. Nasedkin, G. Cugno, A. M. Glauser, I. Argyriou, N. P. Whiteford, P. Mollière, A. Glasse, S. P. Quanz

Abstract: The Medium Resolution Spectrometer on board JWST/MIRI will give access to mid-IR spectra while retaining spatial information. With the unparalleled sensitivity of JWST and the MIRI detectors, the MRS has the potential to revolutionise our understanding of giant exoplanet atmospheres. Molecular map** is a promising detection and characterisation technique used to study the spectra of directly ima… ▽ More The Medium Resolution Spectrometer on board JWST/MIRI will give access to mid-IR spectra while retaining spatial information. With the unparalleled sensitivity of JWST and the MIRI detectors, the MRS has the potential to revolutionise our understanding of giant exoplanet atmospheres. Molecular map** is a promising detection and characterisation technique used to study the spectra of directly imaged exoplanets. We aim to examine the feasibility and application of this technique to MRS observations. We used the instrument simulator MIRISIM to create mock observations of resolved star and exoplanet systems. As an input for the simulator, we used stellar and planet parameters from literature, with the planet spectrum being modelled with the radiative transfer code petitRADTRANS. After processing the raw data with the JWST pipeline, we high pass filter the data to account for the stellar point spread function, and used a forward modelling approach to detect the companions and constrain the chemical composition of their atmospheres through their molecular signatures. We identified limiting factors in spectroscopic characterisation of directly imaged exoplanets with the MRS and simulated observations of two representative systems, HR8799 and GJ504. In both systems, we could detect the presence of multiple molecules that were present in the input model of their atmospheres. We used two different approaches with single molecule forward models, used in literature, that are sensitive to detecting mainly H$_2$O, CO, CH$_4$, and NH$_3$, and a log-likelihood ratio test that uses full atmosphere forward models and is sensitive to a larger number of less dominant molecular species. We show that the MIRI MRS can be used to characterise widely separated giant exoplanets in the mid-IR using molecular map**. △ Less

Submitted 29 October, 2021; originally announced October 2021.

Comments: 18 pages, 10 figures. Accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 658, A72 (2022)

Wavelength Calibration and Resolving Power of the JWST MIRI Medium Resolution Spectrometer

Authors: A. Labiano, I. Argyriou, J. Alvarez-Marquez, A. Glasse, A. Glauser, P. Patapis, D. Law, B. R. Brandl, K. Justtanont, F. Lahuis, J. R. Martinez-Galarza, M. Mueller, A. Noriega-Crespo, P. Royer, B. Shaughnessy, B. Vandenbussche

Abstract: The Mid-Infrared Instrument (MIRI) on-board JWST will provide imaging, coronagraphy, low-resolution spectroscopy and medium-resolution spectroscopy at unprecedented sensitivity levels in the mid-infrared wavelength range. The Medium-Resolution Spectrometer (MRS) of MIRI is an integral field spectrograph that provides diffraction-limited spectroscopy between 4.9 and 28.3 um, within a FOV varying fr… ▽ More The Mid-Infrared Instrument (MIRI) on-board JWST will provide imaging, coronagraphy, low-resolution spectroscopy and medium-resolution spectroscopy at unprecedented sensitivity levels in the mid-infrared wavelength range. The Medium-Resolution Spectrometer (MRS) of MIRI is an integral field spectrograph that provides diffraction-limited spectroscopy between 4.9 and 28.3 um, within a FOV varying from 13 to 56" square. From ground testing, we calculate the physical parameters essential to general observers and calibrating the wavelength solution and resolving power of the MRS is critical for maximising the scientific performance of the instrument. We have used ground-based observations of discrete spectral features in combination with Fabry-Perot etalon spectra to characterize the wavelength solution and spectral resolving power of the MRS. We present the methodology used to derive the MRS spectral characterisation, which includes the precise wavelength coverage of each MRS sub-band, computation of the resolving power as a function of wavelength, and measuring slice-dependent spectral distortions. The resolving power varies from R3500 in channel 1 to R1500 in channel 4. Based on the ground test data, the wavelength calibration accuracy is estimated to be below one tenth of a pixel, with small systematic shifts due to the target position within a slice for unresolved sources, that have a maximum amplitude of about 0.25 spectral resolution elements. Based on ground test data, the MRS complies with the spectral requirements for both the R and wavelength accuracy for which it was designed. We also present the commissioning strategies and targets that will be followed to update the spectral characterisation of the MRS. △ Less

Submitted 8 September, 2021; originally announced September 2021.

Comments: 13 pages. Accepted for publication in A&A

Journal ref: A&A 656, A57 (2021)

METIS: The Mid-infrared ELT Imager and Spectrograph

Authors: Bernhard Brandl, Felix Bettonvil, Roy van Boekel, Adrian Glauser, Sascha Quanz, Olivier Absil, António Amorim, Markus Feldt, Alistair Glasse, Manuel Güdel, Paul Ho, Lucas Labadie, Michael Meyer, Eric Pantin, Hans van Winckel, the METIS Consortium

Abstract: The Mid-infrared ELT Imager and Spectrograph (METIS) will provide the Extremely Large Telescope (ELT) with a unique window to the thermal- and mid-infrared (3 - 13 microns). Its single-conjugate adaptive optics (SCAO) system will enable high contrast imaging and integral field unit (IFU) spectroscopy (R~100,000) at the diffraction limit of the ELT. This article describes the science drivers, conce… ▽ More The Mid-infrared ELT Imager and Spectrograph (METIS) will provide the Extremely Large Telescope (ELT) with a unique window to the thermal- and mid-infrared (3 - 13 microns). Its single-conjugate adaptive optics (SCAO) system will enable high contrast imaging and integral field unit (IFU) spectroscopy (R~100,000) at the diffraction limit of the ELT. This article describes the science drivers, conceptual design, observing modes, and expected performance of METIS. △ Less

Submitted 20 March, 2021; originally announced March 2021.

Comments: 5 pages, 3 figures, published in the ESO Messenger

Journal ref: ESO Messenger 182, 22 (2021)

MARVEL, a four-telescope array for high-precision radial-velocity monitoring

Authors: Gert Raskin, Christian Schwab, Bart Vandenbussche, Joris De Ridder, Cyprien Lanthermann, Jesus Pérez Padilla, Andrew Tkachenko, Hugues Sana, Pierre Royer, Saskia Prins, Leen Decin, Denis Defrère, Jacob Pember, David Atkinson, Alistair Glasse, Don Pollacco, Giovanna Tinetti, Manuel Güdel, Julian Stürmer, Ignasi Ribas, Alexis Brandeker, Lars Buchhave, Samuel Halverson, Gerardo Avila, Johan Morren , et al. (1 additional authors not shown)

Abstract: Since the first discovery of a planet outside of our Solar System in 1995, exoplanet research has shifted from detecting to characterizing worlds around other stars. The TESS (NASA, launched 2019) and PLATO mission (ESA, planned launch 2026) will find and constrain the size of thousands of exoplanets around bright stars all over the sky. Radial velocity measurements are needed to characterize the… ▽ More Since the first discovery of a planet outside of our Solar System in 1995, exoplanet research has shifted from detecting to characterizing worlds around other stars. The TESS (NASA, launched 2019) and PLATO mission (ESA, planned launch 2026) will find and constrain the size of thousands of exoplanets around bright stars all over the sky. Radial velocity measurements are needed to characterize the orbit and mass, and complete the picture of densities and composition of the exoplanet systems found. The Ariel mission (ESA, planned launch 2028) will characterize exoplanet atmospheres with infrared spectroscopy. Characterization of stellar activity using optical spectroscopy from the ground is key to retrieve the spectral footprint of the planetary atmosphere in Ariel's spectra. To enable the scientific harvest of the TESS, PLATO and Ariel space missions, we plan to install MARVEL as an extension of the existing Mercator Telescope at the Roque De Los Muchachos Observatory on La Palma (SPAIN). MARVEL consists of an array of four 80 cm telescopes linked through optical fibers to a single high-resolution echelle spectrograph, optimized for extreme-precision radial velocity measurements. It can observe the radial velocities of four different stars simultaneously or, alternatively, combine the flux from four telescopes pointing to a single faint target in one spectrum. MARVEL is constructed by a KU Leuven (Belgium) led collaboration, with contributions from the UK, Austria, Australia, Sweden, Denmark and Spain. In this paper, we present the MARVEL instrument with special focus on the optical design and expected performance of the spectrograph, and report on the status of the project. △ Less

Submitted 15 December, 2020; originally announced December 2020.

Comments: SPIE Astronomical Telescopes + Instrumentation 2020, Ground-based and Airborne Instrumentation for Astronomy VIII

The quantum efficiency and diffractive image artifacts of Si:As IBC mid-IR detector arrays at 5 $-$ 10 $μ$m: Implications for the JWST/MIRI detectors

Authors: Andras Gaspar, George H. Rieke, Pierre Guillard, Daniel Dicken, Stacey Alberts, Jane Morrison, Michael E. Ressler, Ioannis Argyriou, Alistair Glasse

Abstract: Arsenic doped back illuminated blocked impurity band (BIBIB) silicon detectors have advanced near and mid-IR astronomy for over thirty years; they have high quantum efficiency (QE), especially at wavelengths longer than 10 $μ$m, and a large spectral range. Their radiation hardness is also an asset for space based instruments. Three examples of Si:As BIBIB arrays are used in the Mid-InfraRed Instru… ▽ More Arsenic doped back illuminated blocked impurity band (BIBIB) silicon detectors have advanced near and mid-IR astronomy for over thirty years; they have high quantum efficiency (QE), especially at wavelengths longer than 10 $μ$m, and a large spectral range. Their radiation hardness is also an asset for space based instruments. Three examples of Si:As BIBIB arrays are used in the Mid-InfraRed Instrument (MIRI) of the James Webb Space Telescope (JWST), observing between 5 and 28 $μ$m. In this paper, we analyze the parameters leading to high quantum efficiency (up to $\sim$ 60\%) for the MIRI devices between 5 and 10 $μ$m. We also model the cross-shaped artifact that was first noticed in the 5.7 and 7.8 $μ$m Spitzer/IRAC images and has since also been imaged at shorter wavelength ($\le 10~μ$m) laboratory tests of the MIRI detectors. The artifact is a result of internal reflective diffraction off the pixel-defining metallic contacts to the readout detector circuit. The low absorption in the arrays at the shorter wavelengths enables photons diffracted to wide angles to cross the detectors and substrates multiple times. This is related to similar behavior in other back illuminated solid-state detectors with poor absorption, such as conventional CCDs operating near 1 $μ$m. We investigate the properties of the artifact and its dependence on the detector architecture with a quantum-electrodynamic (QED) model of the probabilities of various photon paths. Knowledge of the artifact properties will be especially important for observations with the MIRI LRS and MRS spectroscopic modes. △ Less

Submitted 24 November, 2020; originally announced November 2020.

Comments: 17 pages, 15 figures, accepted for publication in PASP

MIRISim: A Simulator for the Mid-Infrared Instrument on JWST

Authors: P. D. Klaassen, V. C. Geers, S. M. Beard, A. D. O'Brien, C. Cossou, R. Gastaud, A. Coulais, J. Schreiber, P. J. Kavanagh, M. Topinka, R. Azzollini, W. De Meester, J. Bouwman, A. C. H. Glasse, A. M. Glauser, D. R. Law, M. Cracraft, K. Murray, B. Sargent, O. C. Jones, G. S. Wright

Abstract: The Mid-Infrared Instrument (MIRI) on the James Webb Space Telescope (JWST), has imaging, four coronagraphs and both low and medium resolution spectroscopic modes . Being able to simulate MIRI observations will help commissioning of the instrument, as well as get users familiar with representative data. We designed the MIRI instrument simulator (MIRISim) to mimic the on-orbit performance of the MI… ▽ More The Mid-Infrared Instrument (MIRI) on the James Webb Space Telescope (JWST), has imaging, four coronagraphs and both low and medium resolution spectroscopic modes . Being able to simulate MIRI observations will help commissioning of the instrument, as well as get users familiar with representative data. We designed the MIRI instrument simulator (MIRISim) to mimic the on-orbit performance of the MIRI imager and spectrometers using the Calibration Data Products (CDPs) developed by the MIRI instrument team. The software encorporates accurate representations of the detectors, slicers, distortions, and noise sources along the light path including the telescope's radiative background and cosmic rays. The software also includes a module which enables users to create astronomical scenes to simulate. MIRISim is a publicly available Python package that can be run at the command line, or from within Python. The outputs of MIRISim are detector images in the same uncalibrated data format that will be delivered to MIRI users. These contain the necessary metadata for ingestion by the JWST calibration pipeline. △ Less

Submitted 29 October, 2020; originally announced October 2020.

Comments: 10 pages, 8 figures. Accepted for publication by MNRAS

The nature of point source fringes in mid-infrared spectra acquired with the James Webb Space Telescope

Authors: Ioannis Argyriou, Martyn Wells, Alistair Glasse, David Lee, Pierre Royer, Bart Vandenbussche, Eliot Malumuth, Adrian Glauser, Patrick J. Kavanagh, Alvaro Labiano, Fred Lahuis, Michael Mueller, Polychronis Patapis

Abstract: The constructive and destructive interference in different layers of the James Webb Space Telescope (JWST) Mid-Infrared Instrument (MIRI) detector arrays modulate the detected signal as a function of wavelength. Additionally, sources of different spatial profiles show different fringe patterns. Dividing by a static fringe flat could hamper the scientific interpretation of sources whose fringes do… ▽ More The constructive and destructive interference in different layers of the James Webb Space Telescope (JWST) Mid-Infrared Instrument (MIRI) detector arrays modulate the detected signal as a function of wavelength. Additionally, sources of different spatial profiles show different fringe patterns. Dividing by a static fringe flat could hamper the scientific interpretation of sources whose fringes do not match that of the fringe flat. We find point source fringes measured by the MIRI Medium-Resolution Spectrometer (MRS) to be reproducible under similar observing conditions. We want, thus, to identify the variables, if they exist, that would allow for a parametrization of the signal variations induced by point source fringe modulations. We do this by analyzing MRS detector plane images acquired on the ground. We extracted the fringe profile of multiple point source observations and studied the amplitude and phase of the fringes as a function of field position and pixel sampling of the point spread function of the optical chain. A systematic variation in the amplitude and phase of the point source fringes is found over the wavelength range covered by the test sources (4.9-5.8 $μ$m). The variation depends on the fraction of the point spread function seen by the detector pixel. We identify the non-uniform pixel illumination as the root cause of the reported systematic variation. We report an improvement after correction of 50% on the 1$σ$ standard deviation of the spectral continuum. A 50% improvement is also reported in line sensitivity for a benchmark test with a spectral continuum of 100 mJy. The improvement in the shape of weak lines is illustrated using a T Tauri model spectrum. Consequently, we verify that fringes of extended sources and potentially semi-extended sources and crowded fields can be simulated by combining multiple point source fringe transmissions. △ Less

Submitted 31 July, 2020; originally announced July 2020.

Comments: 17 pages, 31 figures

Space-based infrared interferometry to study exoplanetary atmospheres

Authors: D. Defrère, A. Léger, O. Absil, C. Beichman, B. Biller, W. C. Danchi, K. Ergenzinger, C. Eiroa, S. Ertel, M. Fridlund, A. Garcia Munoz, M. Gillon, A. Glasse, M. Godolt, J. L. Grenfell, S. Kraus, L. Labadie, S. Lacour, R. Liseau, G. Martin, B. Mennesson, G. Micela, S. Minardi, S. P. Quanz, H. Rauer , et al. (8 additional authors not shown)

Abstract: The quest for other habitable worlds and the search for life among them are major goals of modern astronomy. One way to make progress towards these goals is to obtain high-quality spectra of a large number of exoplanets over a broad range of wavelengths. While concepts currently investigated in the United States are focused on visible/NIR wavelengths, where the planets are probed in reflected ligh… ▽ More The quest for other habitable worlds and the search for life among them are major goals of modern astronomy. One way to make progress towards these goals is to obtain high-quality spectra of a large number of exoplanets over a broad range of wavelengths. While concepts currently investigated in the United States are focused on visible/NIR wavelengths, where the planets are probed in reflected light, a compelling alternative to characterize planetary atmospheres is the mid-infrared waveband (5-20~$μ$m). Indeed, mid-infrared observations provide key information on the presence of an atmosphere, the surface conditions (e.g., temperature, pressure, habitability), and the atmospheric composition in important species such as H$_2$O, CO$_2$, O$_3$, CH$_4$, and N$_2$O. This information is essential to investigate the potential habitability of exoplanets and to make progress towards the search for life in the universe. Obtaining high-quality mid-infrared spectra of exoplanets from the ground is however extremely challenging due to the overwhelming brightness and turbulence of Earth's atmosphere. In this paper, we present a concept of space-based mid-infrared interferometer that can tackle this observing challenge and discuss the main technological developments required to launch such a sophisticated instrument. △ Less

Submitted 21 December, 2018; v1 submitted 12 January, 2018; originally announced January 2018.

Comments: 20 page, 3 figures, 1 table

Journal ref: Experimental Astronomy 2018 (https://link.springer.com/article/10.1007%2Fs10686-018-9613-2)

Probing the dusty stellar populations of the Local Volume Galaxies with JWST/MIRI

Authors: Olivia C. Jones, Margaret Meixner, Kay Justtanont, Alistair Glasse

Abstract: The Mid-Infrared Instrument (MIRI) for the {\em James Webb Space Telescope} (JWST) will revolutionize our understanding of infrared stellar populations in the Local Volume. Using the rich {\em Spitzer}-IRS spectroscopic data-set and spectral classifications from the Surveying the Agents of Galaxy Evolution (SAGE)-Spectroscopic survey of over a thousand objects in the Magellanic Clouds, the Grid of… ▽ More The Mid-Infrared Instrument (MIRI) for the {\em James Webb Space Telescope} (JWST) will revolutionize our understanding of infrared stellar populations in the Local Volume. Using the rich {\em Spitzer}-IRS spectroscopic data-set and spectral classifications from the Surveying the Agents of Galaxy Evolution (SAGE)-Spectroscopic survey of over a thousand objects in the Magellanic Clouds, the Grid of Red supergiant and Asymptotic giant branch star ModelS ({\sc grams}), and the grid of YSO models by Robitaille et al. (2006), we calculate the expected flux-densities and colors in the MIRI broadband filters for prominent infrared stellar populations. We use these fluxes to explore the {\em JWST}/MIRI colours and magnitudes for composite stellar population studies of Local Volume galaxies. MIRI colour classification schemes are presented; these diagrams provide a powerful means of identifying young stellar objects, evolved stars and extragalactic background galaxies in Local Volume galaxies with a high degree of confidence. Finally, we examine which filter combinations are best for selecting populations of sources based on their JWST colours. △ Less

Submitted 27 March, 2017; originally announced March 2017.

Comments: 16 pages, 7 figures, 2 online tables; accepted for publication in ApJ

EELT-HIRES the high-resolution spectrograph for the E-ELT

Authors: A. Marconi, P. Di Marcantonio, V. D'Odorico, S. Cristiani, R. Maiolino, E. Oliva, L. Origlia, M. Riva, L. Valenziano, F. M. Zerbi, M. Abreu, V. Adibekyan, C. Allende Prieto, P. J. Amado, W. Benz, I. Boisse, X. Bonfils, F. Bouchy, L. Buchhave, D. Buscher, A. Cabral, B. L. Canto Martins, A. Chiavassa, J. Coelho, L. B. Christensen , et al. (48 additional authors not shown)

Abstract: The first generation of E-ELT instruments will include an optical-infrared High Resolution Spectrograph, conventionally indicated as EELT-HIRES, which will be capable of providing unique breakthroughs in the fields of exoplanets, star and planet formation, physics and evolution of stars and galaxies, cosmology and fundamental physics. A 2-year long phase A study for EELT-HIRES has just started and… ▽ More The first generation of E-ELT instruments will include an optical-infrared High Resolution Spectrograph, conventionally indicated as EELT-HIRES, which will be capable of providing unique breakthroughs in the fields of exoplanets, star and planet formation, physics and evolution of stars and galaxies, cosmology and fundamental physics. A 2-year long phase A study for EELT-HIRES has just started and will be performed by a consortium composed of institutes and organisations from Brazil, Chile, Denmark, France, Germany, Italy, Poland, Portugal, Spain, Sweden, Switzerland and United Kingdom. In this paper we describe the science goals and the preliminary technical concept for EELT-HIRES which will be developed during the phase A, as well as its planned development and consortium organisation during the study. △ Less

Submitted 2 September, 2016; originally announced September 2016.

Comments: 12 pages, in Ground-based and Airborne Instrumentation for Astronomy VI, 2016, Proc. SPIE 9908, 23

The MIRI Medium Resolution Spectrometer calibration pipeline

Authors: A. Labiano, R. Azzollini, J. I. Bailey III, S. Beard, D. Dicken, M. García-Marín, V. Geers, A. Glasse, A. Glauser, K. Gordon, K. Justtanont, P. Klaassen, F. Lahuis, D. Law, J. Morrison, M. Müller, G. Rieke, B. Vandenbussche, G. Wright

Abstract: The Mid-Infrared Instrument (MIRI) Medium Resolution Spectrometer (MRS) is the only mid-IR Integral Field Spectrometer on board James Webb Space Telescope. The complexity of the MRS requires a very specialized pipeline, with some specific steps not present in other pipelines of JWST instruments, such as fringe corrections and wavelength offsets, with different algorithms for point source or extend… ▽ More The Mid-Infrared Instrument (MIRI) Medium Resolution Spectrometer (MRS) is the only mid-IR Integral Field Spectrometer on board James Webb Space Telescope. The complexity of the MRS requires a very specialized pipeline, with some specific steps not present in other pipelines of JWST instruments, such as fringe corrections and wavelength offsets, with different algorithms for point source or extended source data. The MRS pipeline has also two different variants: the baseline pipeline, optimized for most foreseen science cases, and the optimal pipeline, where extra steps will be needed for specific science cases. This paper provides a comprehensive description of the MRS Calibration Pipeline from uncalibrated slope images to final scientific products, with brief descriptions of its algorithms, input and output data, and the accessory data and calibration data products necessary to run the pipeline. △ Less

Submitted 18 August, 2016; originally announced August 2016.

Comments: 10 pages, 8 figures

Journal ref: Conference Volume 9910, Observatory Operations: Strategies, Processes, and Systems VI, June 26, 2016

The Mid-Infrared Instrument for the James Webb Space Telescope: IV. The Low Resolution Spectrometer

Authors: S. Kendrew, S. Scheithauer, P. Bouchet, J. Amiaux, R. Azzolini, J. Bouwman, C. Chen, D. Dubreuil, S. Fischer, A. Glasse, T. Greene, P. -O. Lagage, F. Lahuis, S. Ronayette, D. Wright, G. S. Wright

Abstract: The Low Resolution Spectrometer of the MIRI, which forms part of the imager module, will provide R~100 long-slit and slitless spectroscopy from 5 to 12 micron. The design is optimised for observations of compact sources, such as exoplanet host stars. We provide here an overview of the design of the LRS, and its performance as measured during extensive test campaigns, examining in particular the de… ▽ More The Low Resolution Spectrometer of the MIRI, which forms part of the imager module, will provide R~100 long-slit and slitless spectroscopy from 5 to 12 micron. The design is optimised for observations of compact sources, such as exoplanet host stars. We provide here an overview of the design of the LRS, and its performance as measured during extensive test campaigns, examining in particular the delivered image quality, dispersion, and resolving power, as well as spectrophotometric performance, flatfield accuracy and the effects of fringing. We describe the operational concept of the slitless mode, which is optimally suited to transit spectroscopy of exoplanet atmospheres. The LRS mode of the MIRI was found to perform consistently with its requirements and goals. △ Less

Submitted 9 December, 2015; originally announced December 2015.

Comments: published in PASP, vol. 127, issue 953, pp.623-632, 2015

The Mid-Infrared Instrument for the James Webb Space Telescope, VI: The Medium Resolution Spectrometer

Authors: Martyn Wells, J. -W. Pel, Alistair Glasse, G. S. Wright, Gabby Aitink-Kroes, Ruyman Azzollini, Steven Beard, B. R. Brandl, Angus Gallie, V. C. Geers, A. M. Glauser, Peter Hastings, Th. Henning, Rieks Jager, K. Justtanont, Bob Kruizinga, Fred Lahuis, David Lee, I. Martinez-Delgado, J. R. Martinez-Galarza, M. Meijers, Jane E. Morrison, Friedrich Mueller, Thodori Nakos, Brian O'Sullivan , et al. (13 additional authors not shown)

Abstract: We describe the design and performance of the Medium Resolution Spectrometer (MRS) for the JWST-MIRI instrument. The MRS incorporates four coaxial spectral channels in a compact opto-mechanical layout that generates spectral images over fields of view up to 7.7 X 7.7 arcseconds in extent and at spectral resolving powers ranging from 1,300 to 3,700. Each channel includes an all-reflective integral… ▽ More We describe the design and performance of the Medium Resolution Spectrometer (MRS) for the JWST-MIRI instrument. The MRS incorporates four coaxial spectral channels in a compact opto-mechanical layout that generates spectral images over fields of view up to 7.7 X 7.7 arcseconds in extent and at spectral resolving powers ranging from 1,300 to 3,700. Each channel includes an all-reflective integral field unit (IFU): an 'image slicer' that reformats the input field for presentation to a grating spectrometer. Two 1024 X 1024 focal plane arrays record the output spectral images with an instantaneous spectral coverage of approximately one third of the full wavelength range of each channel. The full 5 to 28.5 micron spectrum is then obtained by making three exposures using gratings and pass-band-determining filters that are selected using just two three-position mechanisms. The expected on-orbit optical performance is presented, based on testing of the MIRI Flight Model and including spectral and spatial coverage and resolution. The point spread function of the reconstructed images is shown to be diffraction limited and the optical transmission is shown to be consistent with the design expectations. △ Less

Submitted 12 August, 2015; originally announced August 2015.

Journal ref: PASP, 2015, 127, 646

The Mid-Infrared Instrument for the James Webb Space Telescope, III: MIRIM, The MIRI Imager

Authors: P. Bouchet, M. Garcia-Marin, P. -O. Lagage, J. Amiaux, J. -L. Augueres, E. Bauwens, J. A. D. L. Blommaert, C. H. Chen, O. H. Detre, D. Dicken, D. Dubreuil, Ph. Galdemard, R. Gastaud, A. Glasse, K. D. Gordon, F. Gougnaud, P. Guillard, K. Justtanont, O. Krause, D. Leboeuf, Y. Longval, L. Martin, E. Mazy, V. Moreau, G. Olofsson , et al. (12 additional authors not shown)

Abstract: In this article, we describe the MIRI Imager module (MIRIM), which provides broad-band imaging in the 5 - 27 microns wavelength range for the James Webb Space Telescope. The imager has a 0"11 pixel scale and a total unobstructed view of 74"x113". The remainder of its nominal 113"x113" field is occupied by the coronagraphs and the low resolution spectrometer. We present the instrument optical and m… ▽ More In this article, we describe the MIRI Imager module (MIRIM), which provides broad-band imaging in the 5 - 27 microns wavelength range for the James Webb Space Telescope. The imager has a 0"11 pixel scale and a total unobstructed view of 74"x113". The remainder of its nominal 113"x113" field is occupied by the coronagraphs and the low resolution spectrometer. We present the instrument optical and mechanical design. We show that the test data, as measured during the test campaigns undertaken at CEA-Saclay, at the Rutherford Appleton Laboratory, and at the NASA Goddard Space Flight Center, indicate that the instrument complies with its design requirements and goals. We also discuss the operational requirements (multiple dithers and exposures) needed for optimal scientific utilization of the MIRIM. △ Less

Submitted 11 August, 2015; originally announced August 2015.

Comments: 29 pages, 9 figures

Journal ref: 2015 Publications of the Astronomical Society of the Pacific, Volume 127, issue 953, pp.612-622

The Mid-Infrared Instrument for the James Webb Space Telescope, X. Operations and Data Reduction

Authors: Karl D. Gordon, C. H. Chen, Rachel E. Anderson, Ruyman Azzollini, L. Bergeron, Patrice Bouchet, Jeroen Bouwman, Misty Cracraft, Sebastian Fischer, Scott D. Friedman, Macarena Garcia-Marin, Alistair Glasse, Adrian M. Glauser, G. B. Goodson, T. P. Greene, Dean C. Hines, M. A. Khorrami, Fred Lahuis, C. -P. Lajoie, M. E. Meixner, Jane E. Morrison, Brian O'Sullivan, K. M. Pontoppidan, M. W. Regan, M. E. Ressler , et al. (4 additional authors not shown)

Abstract: We describe the operations concept and data reduction plan for the Mid- Infrared Instrument (MIRI) for the James Webb Space Telescope (JWST). The overall JWST operations concept is to use Observation Templates (OTs) to provide a straightforward and intuitive way for users to specify observations. MIRI has four OTs that correspond to the four observing modes: 1.) Imaging, 2.) Coronagraphy, 3.) Low… ▽ More We describe the operations concept and data reduction plan for the Mid- Infrared Instrument (MIRI) for the James Webb Space Telescope (JWST). The overall JWST operations concept is to use Observation Templates (OTs) to provide a straightforward and intuitive way for users to specify observations. MIRI has four OTs that correspond to the four observing modes: 1.) Imaging, 2.) Coronagraphy, 3.) Low Resolution Spectroscopy, and 4.) Medium Resolution Spectroscopy. We outline the user choices and expansion of these choices into detailed instrument operations. The data reduction plans for MIRI are split into three stages, where the specificity of the reduction steps to the observation type increases with stage. The reduction starts with integration ramps: stage 1 yields uncalibrated slope images; stage 2 calibrates the slope images; and then stage 3 combines multiple calibrated slope images into high level data products (e.g. mosaics, spectral cubes, and extracted source information). Finally, we give examples of the data and data products that will be derived from each of the four different OTs. △ Less

Submitted 10 August, 2015; originally announced August 2015.

Journal ref: PASP, 127, 696, 2015

The Mid-Infrared Instrument for the James Webb Space Telescope, IX: Predicted Sensitivity

Authors: Alistair Glasse, G. H. Rieke, E. Bauwens, Macarena Garcıa-Marın, M. E. Ressler, Steffen Rost, T. V. Tikkanen, B. Vandenbussche, G. S. Wright

Abstract: We present an estimate of the performance that will be achieved during on orbit operations of the JWST Mid Infrared Instrument, MIRI. The efficiency of the main imager and spectrometer systems in detecting photons from an astronomical target are presented, based on measurements at sub-system and instrument level testing, with the end-to-end transmission budget discussed in some detail. The brighte… ▽ More We present an estimate of the performance that will be achieved during on orbit operations of the JWST Mid Infrared Instrument, MIRI. The efficiency of the main imager and spectrometer systems in detecting photons from an astronomical target are presented, based on measurements at sub-system and instrument level testing, with the end-to-end transmission budget discussed in some detail. The brightest target fluxes that can be measured without saturating the detectors are provided. The sensitivity for long duration observations of faint sources is presented in terms of the target flux required to achieve a signal to noise ratio of 10 after a 10,000 second observation. The algorithms used in the sensitivity model are presented, including the understanding gained during testing of the MIRI Flight Model and flight-like detectors. △ Less

Submitted 10 August, 2015; originally announced August 2015.

Journal ref: PASP, 127, 686, 2015

The Mid-Infrared Instrument for the James Webb Space Telescope, V: Predicted Performance of the MIRI Coronagraphs

Authors: A. Boccaletti, P. -O. Lagage, P. Baudoz, C. Beichman, P. Bouchet, C. Cavarroc, D. Dubreuil, Alistair Glasse, A. M. Glauser, D. C. Hines, C. -P. Lajoie, J. Lebreton, M. D. Perrin, L. Pueyo, J. M. Reess, G. H. Rieke, S. Ronayette, D. Rouan, R. Soummer, G. S. Wright

Abstract: The imaging channel on the Mid-Infrared Instrument (MIRI) is equipped with four coronagraphs that provide high contrast imaging capabilities for studying faint point sources and extended emission that would otherwise be overwhelmed by a bright point-source in its vicinity. Such bright sources might include stars that are orbited by exoplanets and circumstellar material, mass-loss envelopes around… ▽ More The imaging channel on the Mid-Infrared Instrument (MIRI) is equipped with four coronagraphs that provide high contrast imaging capabilities for studying faint point sources and extended emission that would otherwise be overwhelmed by a bright point-source in its vicinity. Such bright sources might include stars that are orbited by exoplanets and circumstellar material, mass-loss envelopes around post-main-sequence stars, the near-nuclear environments in active galaxies, and the host galaxies of distant quasars. This paper describes the coronagraphic observing modes of MIRI, as well as performance estimates based on measurements of the MIRI flight model during cryo-vacuum testing. A brief outline of coronagraphic operations is also provided. Finally, simulated MIRI coronagraphic observations of a few astronomical targets are presented for illustration. △ Less

Submitted 10 August, 2015; originally announced August 2015.

Journal ref: PASP, 127, 633, 2015

The Mid-Infrared Instrument for JWST, II: Design and Build

Authors: G. S. Wright, David Wright, G. B. Goodson, G. H. Rieke, Gabby Aitink-Kroes, J. Amiaux, Ana Aricha-Yanguas, Ruyman Azzolini, Kimberly Banks, D. Barrado-Navascues, T. Belenguer-Davila, J. A. D. L. Bloemmart, Patrice Bouchet, B. R. Brandl, L. Colina, Ors Detre, Eva Diaz-Catala, Paul Eccleston, Scott D. Friedman, Macarena Garcia-Marin, Manuel Guedel, Alistair Glasse, Adrian M. Glauser, T. P. Greene, Uli Groezinger , et al. (48 additional authors not shown)

Abstract: The Mid-InfraRed Instrument (MIRI) on the James Webb Space Telescope (JWST) provides measurements over the wavelength range 5 to 28.5 microns. MIRI has, within a single 'package', four key scientific functions: photometric imaging, coronagraphy, single-source low-spectral resolving power (R ~ 100) spectroscopy, and medium-resolving power (R ~ 1500 to 3500) integral field spectroscopy. An associate… ▽ More The Mid-InfraRed Instrument (MIRI) on the James Webb Space Telescope (JWST) provides measurements over the wavelength range 5 to 28.5 microns. MIRI has, within a single 'package', four key scientific functions: photometric imaging, coronagraphy, single-source low-spectral resolving power (R ~ 100) spectroscopy, and medium-resolving power (R ~ 1500 to 3500) integral field spectroscopy. An associated cooler system maintains MIRI at its operating temperature of < 6.7 K. This paper describes the driving principles behind the design of MIRI, the primary design parameters, and their realization in terms of the 'as-built' instrument. It also describes the test program that led to delivery of the tested and calibrated Flight Model to NASA in 2012, and the confirmation after delivery of the key interface requirements. △ Less

Submitted 10 August, 2015; originally announced August 2015.

Journal ref: PASP, 127, 595, 2015

The Mid-Infrared Instrument for the James Webb Space Telescope I: Introduction

Authors: G. H. Rieke, G. S. Wright, T. Boeker, J. Bouwman, L. Colina, Alistair Glasse, K. D. Gordon, T. P. Greene, Manual Guedel, Th. Henning, K. Justtanont, P. -O. Lagage, M. E. Meixner, H. -U. Norgaard-Nielsen, T. P. Ray, M. E. Ressler, E. G. van Dishoeck, C. Waelkens

Abstract: MIRI (the Mid-Infrared Instrument for the James Webb Space Telescope (JWST)) operates from 5 to 28.5 microns and combines over this range: 1.) unprecedented sensitivity levels; 2.) sub-arcsec angular resolution; 3.) freedom from atmospheric interference; 4.) the inherent stability of observing in space; and 5.) a suite of versatile capabilities including imaging, low and medium resolution spectros… ▽ More MIRI (the Mid-Infrared Instrument for the James Webb Space Telescope (JWST)) operates from 5 to 28.5 microns and combines over this range: 1.) unprecedented sensitivity levels; 2.) sub-arcsec angular resolution; 3.) freedom from atmospheric interference; 4.) the inherent stability of observing in space; and 5.) a suite of versatile capabilities including imaging, low and medium resolution spectroscopy (with an integral field unit), and coronagraphy. We illustrate the potential uses of this unique combination of capabilities with various science examples: 1.) imaging exoplanets; 2.) transit and eclipse spectroscopy of exoplanets; 3.) probing the first stages of star and planet formation, including identifying bioactive molecules; 4.) determining star formation rates and mass growth as galaxies are assembled; and 5.) characterizing the youngest massive galaxies. This paper is the introduction to a series of ten covering all aspects of the instrument. △ Less

Submitted 10 August, 2015; originally announced August 2015.

Journal ref: PASP, 127, 584, 2015

The EChO science case

Authors: Giovanna Tinetti, Pierre Drossart, Paul Eccleston, Paul Hartogh, Kate Isaak, Martin Linder, Christophe Lovis, Giusi Micela, Marc Ollivier, Ludovic Puig, Ignasi Ribas, Ignas Snellen, Bruce Swinyard. France Allard, Joanna Barstow, James Cho, Athena Coustenis, Charles Cockell, Alexandre Correia, Leen Decin, Remco de Kok, Pieter Deroo, Therese Encrenaz, Francois Forget, Alistair Glasse, Caitlin Griffith , et al. (326 additional authors not shown)

Abstract: The discovery of almost 2000 exoplanets has revealed an unexpectedly diverse planet population. Observations to date have shown that our Solar System is certainly not representative of the general population of planets in our Milky Way. The key science questions that urgently need addressing are therefore: What are exoplanets made of? Why are planets as they are? What causes the exceptional divers… ▽ More The discovery of almost 2000 exoplanets has revealed an unexpectedly diverse planet population. Observations to date have shown that our Solar System is certainly not representative of the general population of planets in our Milky Way. The key science questions that urgently need addressing are therefore: What are exoplanets made of? Why are planets as they are? What causes the exceptional diversity observed as compared to the Solar System? EChO (Exoplanet Characterisation Observatory) has been designed as a dedicated survey mission for transit and eclipse spectroscopy capable of observing a large and diverse planet sample within its four-year mission lifetime. EChO can target the atmospheres of super-Earths, Neptune-like, and Jupiter-like planets, in the very hot to temperate zones (planet temperatures of 300K-3000K) of F to M-type host stars. Over the next ten years, several new ground- and space-based transit surveys will come on-line (e.g. NGTS, CHEOPS, TESS, PLATO), which will specifically focus on finding bright, nearby systems. The current rapid rate of discovery would allow the target list to be further optimised in the years prior to EChO's launch and enable the atmospheric characterisation of hundreds of planets. Placing the satellite at L2 provides a cold and stable thermal environment, as well as a large field of regard to allow efficient time-critical observation of targets randomly distributed over the sky. A 1m class telescope is sufficiently large to achieve the necessary spectro-photometric precision. The spectral coverage (0.5-11 micron, goal 16 micron) and SNR to be achieved by EChO, thanks to its high stability and dedicated design, would enable a very accurate measurement of the atmospheric composition and structure of hundreds of exoplanets. △ Less

Submitted 19 February, 2015; originally announced February 2015.

Comments: 50 pages, 30 figures. Experimental Astronomy

The Mid-infrared E-ELT Imager and Spectrograph (METIS)

Authors: Bernhard R. Brandl, Markus Feldt, Alistair Glasse, Manuel Guedel, Stephanie Heikamp, Matthew Kenworthy, Rainer Lenzen, Michael R. Meyer, Frank Molster, Sander Paalvast, Eric J. Pantin, Sascha P. Quanz, Eva Schmalzl, Remko Stuik, Lars Venema, Christoffel Waelkens, the NOVA-Astron Instrumentation Group

Abstract: METIS will be among the first generation of scientific instruments on the E-ELT. Focusing on highest angular resolution and high spectral resolution, METIS will provide diffraction limited imaging and coronagraphy from 3-14um over an 20"x20" field of view, as well as integral field spectroscopy at R ~ 100,000 from 2.9-5.3um. In addition, METIS provides medium-resolution (R ~ 5000) long slit spectr… ▽ More METIS will be among the first generation of scientific instruments on the E-ELT. Focusing on highest angular resolution and high spectral resolution, METIS will provide diffraction limited imaging and coronagraphy from 3-14um over an 20"x20" field of view, as well as integral field spectroscopy at R ~ 100,000 from 2.9-5.3um. In addition, METIS provides medium-resolution (R ~ 5000) long slit spectroscopy, and polarimetric measurements at N band. While the baseline concept has already been discussed, this paper focuses on the significant developments over the past two years in several areas: The science case has been updated to account for recent progress in the main science areas circum-stellar disks and the formation of planets, exoplanet detection and characterization, Solar system formation, massive stars and clusters, and star formation in external galaxies. We discuss the developments in the adaptive optics (AO) concept for METIS, the telescope interface, and the instrument modelling. Last but not least, we provide an overview of our technology development programs, which ranges from coronagraphic masks, immersed gratings, and cryogenic beam chopper to novel approaches to mirror polishing, background calibration and cryo-cooling. These developments have further enhanced the design and technology readiness of METIS to reliably serve as an early discovery machine on the E-ELT. △ Less

Submitted 10 September, 2014; originally announced September 2014.

Comments: 18 pages, 14 figures, paper presented at the conference 'Astronomical Telescopes and Instrumentation' in Montreal (2014)

Optical performance of the JWST MIRI flight model: characterization of the point spread function at high-resolution

Authors: P. Guillard, T. Rodet, S. Ronayette, J. Amiaux, A. Abergel, V. Moreau, J. L. Augueres, A. Bensalem, T. Orduna, C. Nehmé, A. R. Belu, E. Pantin, P. O Lagage, Y. Longval, A. C. H. Glasse, P. Bouchet, C. Cavarroc, D. Dubreuil, S. Kendrew

Abstract: The Mid Infra Red Instrument (MIRI) is one of the four instruments onboard the James Webb Space Telescope (JWST), providing imaging, coronagraphy and spectroscopy over the 5-28 microns band. To verify the optical performance of the instrument, extensive tests were performed at CEA on the flight model (FM) of the Mid-InfraRed IMager (MIRIM) at cryogenic temperatures and in the infrared. This paper… ▽ More The Mid Infra Red Instrument (MIRI) is one of the four instruments onboard the James Webb Space Telescope (JWST), providing imaging, coronagraphy and spectroscopy over the 5-28 microns band. To verify the optical performance of the instrument, extensive tests were performed at CEA on the flight model (FM) of the Mid-InfraRed IMager (MIRIM) at cryogenic temperatures and in the infrared. This paper reports on the point spread function (PSF) measurements at 5.6 microns, the shortest operating wavelength for imaging. At 5.6 microns the PSF is not Nyquist-sampled, so we use am original technique that combines a microscanning measurement strategy with a deconvolution algorithm to obtain an over-resolved MIRIM PSF. The microscanning consists in a sub-pixel scan of a point source on the focal plane. A data inversion method is used to reconstruct PSF images that are over-resolved by a factor of 7 compared to the native resolution of MIRI. We show that the FWHM of the high-resolution PSFs were 5-10% wider than that obtained with Zemax simulations. The main cause was identified as an out-of-specification tilt of the M4 mirror. After correction, two additional test campaigns were carried out, and we show that the shape of the PSF is conform to expectations. The FWHM of the PSFs are 0.18-0.20 arcsec, in agreement with simulations. 56.1-59.2% of the total encircled energy (normalized to a 5 arcsec radius) is contained within the first dark Airy ring, over the whole field of view. At longer wavelengths (7.7-25.5 microns), this percentage is 57-68%. MIRIM is thus compliant with the optical quality requirements. This characterization of the MIRIM PSF, as well as the deconvolution method presented here, are of particular importance, not only for the verification of the optical quality and the MIRI calibration, but also for scientific applications. △ Less

Submitted 29 June, 2010; originally announced June 2010.

Comments: 13 pages, submitted to SPIE Proceedings vol. 7731, Space Telescopes and Instrumentation 2010: Optical, Infrared, and Millimeter Wave

Wavelength calibration of the JWST-MIRI medium resolution spectrometer

Authors: J. R. Martinez-Galarza, A. M. Glauser, A. Hernan-Caballero, R. Azzollini, A. Glasse, S. Kendrew, B. Brandl, F. Lahuis

Abstract: We present the wavelength and spectral resolution characterisation of the Integral Field Unit (IFU) Medium Resolution Spectrometer for the Mid-InfraRed Instrument (MIRI), to fly onboard the James Webb Space Telescope in 2014. We use data collected using the Verification Model of the instrument and develop an empirical method to calibrate properties such as wavelength range and resolving power in a… ▽ More We present the wavelength and spectral resolution characterisation of the Integral Field Unit (IFU) Medium Resolution Spectrometer for the Mid-InfraRed Instrument (MIRI), to fly onboard the James Webb Space Telescope in 2014. We use data collected using the Verification Model of the instrument and develop an empirical method to calibrate properties such as wavelength range and resolving power in a portion of the spectrometer's full spectral range (5-28 microns). We test our results against optical models to verify the system requirements and combine them with a study of the fringing pattern in the instrument's detector to provide a more accurate calibration. We show that MIRI's IFU spectrometer will be able to produce spectra with a resolving power above R=2800 in the wavelength range 6.46-7.70 microns, and that the unresolved spectral lines are well fitted by a Gaussian profile. △ Less

Submitted 27 June, 2010; originally announced June 2010.

Comments: 12 pages, submitted to SPIE Proceedings vol. 7731, Space Telescopes and Instrumentation 2010: Optical, Infrared, and Millimeter Wave

Mid-infrared astronomy with the E-ELT: Performance of METIS

Authors: Sarah Kendrew, Laurent Jolissaint, Bernhard Brandl, Rainer Lenzen, Eric Pantin, Alistair Glasse, Joris Blommaert, Lars Venema, Ralf Siebenmorgen, Frank Molster

Abstract: We present results of performance modelling for METIS, the Mid-infrared European Extremely Large Telescope (E-ELT) Imager and Spectrograph. Designed by a consortium of NOVA (Netherlands), UK Astronomy Technology Centre (UK), MPIA Heidelberg (Germany), CEA Saclay (France) and KU Leuven (Belgium), METIS will cover the atmospheric windows in L, M and N-band and will offer imaging, medium-resolution s… ▽ More We present results of performance modelling for METIS, the Mid-infrared European Extremely Large Telescope (E-ELT) Imager and Spectrograph. Designed by a consortium of NOVA (Netherlands), UK Astronomy Technology Centre (UK), MPIA Heidelberg (Germany), CEA Saclay (France) and KU Leuven (Belgium), METIS will cover the atmospheric windows in L, M and N-band and will offer imaging, medium-resolution slit spectroscopy (R~1000-3000) and high-resolution integral field spectroscopy (R~100,000). Our model uses a detailed set of input parameters for site characteristics and atmospheric profiles, optical design, thermal background and the most up-to-date IR detector specifications. We show that METIS will bring an orders-of-magnitude level improvement in sensitivity and resolution over current ground-based IR facilities, bringing mid-IR sensitivities to the micro-Jansky regime. As the only proposed E-ELT instrument to cover this entire spectral region, and the only mid-IR high-resolution integral field unit planned on the ground or in space, METIS will open up a huge discovery space in IR astronomy in the next decade. △ Less

Submitted 23 June, 2010; originally announced June 2010.

Comments: 13 pages, submitted to SPIE Proceedings vol. 7735, Ground-based and Airborne Instrumentation for Astronomy III (2010). Simulation code available at http://tinyurl.com/metis-sens

METIS - the Mid-infrared E-ELT Imager and Spectrograph

Authors: Bernhard R. Brandl, Rainer Lenzen, Eric Pantin, Alistair Glasse, Joris Blommaert, Lars Venema, Frank Molster, Ralf Siebenmorgen, Hermann Boehnhardt, Ewine van Dishoeck, Paul van der Werf, Thomas Henning, Wolfgang Brandner, Pierre-Olivier Lagage, Toby J. T. Moore, Maarten Baes, Christoffel Waelkens, Chris Wright, Hans Ulrich Kaeufl, Sarah Kendrew, Remko Stuik, Laurent Jolissaint

Abstract: METIS, the Mid-infrared ELT Imager and Spectrograph (formerly called MIDIR), is a proposed instrument for the European Extremely Large Telescope (E-ELT), currently undergoing a phase-A study. The study is carried out within the framework of the ESO-sponsored E-ELT instrumentation studies. METIS will be designed to cover the E-ELT science needs at wavelengths longward of 3um, where the thermal ba… ▽ More METIS, the Mid-infrared ELT Imager and Spectrograph (formerly called MIDIR), is a proposed instrument for the European Extremely Large Telescope (E-ELT), currently undergoing a phase-A study. The study is carried out within the framework of the ESO-sponsored E-ELT instrumentation studies. METIS will be designed to cover the E-ELT science needs at wavelengths longward of 3um, where the thermal background requires different operating schemes. In this paper we discuss the main science drivers from which the instrument baseline has been derived. Specific emphasis has been given to observations that require very high spatial and spectral resolution, which can only be achieved with a ground-based ELT. We also discuss the challenging aspects of background suppression techniques, adaptive optics in the mid-IR, and telescope site considerations. The METIS instrument baseline includes imaging and spectroscopy at the atmospheric L, M, and N bands with a possible extension to Q band imaging. Both coronagraphy and polarimetry are also being considered. However, we note that the concept is still not yet fully consolidated. The METIS studies are being performed by an international consortium with institutes from the Netherlands, Germany, France, United Kingdom, and Belgium. △ Less

Submitted 21 July, 2008; originally announced July 2008.

Comments: 15 pages, to be published in Proc SPIE 7014: Ground-based & Airborne Instrumentation for Astronomy II

Mid-Infrared Instrumentation for the European Extremely Large Telescope

Authors: S. Kendrew, B. Brandl, R. Lenzen, L. Venema, H. U. Käufl, G. Finger, A. Glasse, R. Stuik

Abstract: MIDIR is the proposed thermal/mid-IR imager and spectrograph for the European Extremely Large Telescope (E-ELT). It will cover the wavelength range of 3 to at least 20 microns. Designed for diffraction-limited performance over the entire wavelength range, MIDIR will require an adaptive optics system; a cryogenically cooled system could offer optimal performance in the IR, and this is a critical… ▽ More MIDIR is the proposed thermal/mid-IR imager and spectrograph for the European Extremely Large Telescope (E-ELT). It will cover the wavelength range of 3 to at least 20 microns. Designed for diffraction-limited performance over the entire wavelength range, MIDIR will require an adaptive optics system; a cryogenically cooled system could offer optimal performance in the IR, and this is a critical aspect of the instrument design. We present here an overview of the project, including a discussion of MIDIR's science goals and a comparison with other infrared (IR) facilities planned in the next decade; top level requirements derived from these goals are outlined. We describe the optical and mechanical design work carried out in the context of a conceptual design study, and discuss some important issues to emerge from this work, related to the design, operation and calibration of the instrument. The impact of telescope optical design choices on the requirements for the MIDIR instrument is demonstrated. △ Less

Submitted 23 August, 2007; originally announced August 2007.

Comments: for publication in SPIE Proceedings vol. 6692, Cryogenic Optical Systems and Instrumentation XII, eds. J.B. Heaney and L.G. Burriesci, San Diego, Aug 2007

Specsim: The MIRI Medium Resolution Spectrometer Simulator

Authors: Nuria P. F. Lorente, Alistair C. H. Glasse, Gillian S. Wright, Macarena Garcia-Marin

Abstract: MIRI, the Mid-InfraRed Instrument, is one of four instruments being built for the James Webb Space Telescope, and is developed jointly between an EuropeanConsortium and the US. In this paper we present a software data simulator for one of MIRI's four instruments: the Integral Field Unit (IFU) Medium Resolution Spectrometer (MIRI-MRS), the first mid-infrared IFU spectrograph, and one of the first… ▽ More MIRI, the Mid-InfraRed Instrument, is one of four instruments being built for the James Webb Space Telescope, and is developed jointly between an EuropeanConsortium and the US. In this paper we present a software data simulator for one of MIRI's four instruments: the Integral Field Unit (IFU) Medium Resolution Spectrometer (MIRI-MRS), the first mid-infrared IFU spectrograph, and one of the first IFUs to be used in a space mission. To give the MIRI community a preview of the properties of the MIRI-MRS data products before the telescope is operational, the Specsim tool has been developed to model, in software, the operation of the spectrometer. Specsim generates synthetic data frames approximating those which will be taken by the instrument in orbit. The program models astronomical sources and generates detector frames using the predicted and measured optical properties of the telescope and MIRI. These frames can then be used to illustrate and inform a range of operational activities, including data calibration strategies and the development and testing of the data reduction software for the MIRI-MRS. Specsim will serve as a means of communication between the many consortium members by providing a way to easily illustrate the performance of the spectrometer under different circumstances, tolerances of components and design scenarios. △ Less

Submitted 30 August, 2006; v1 submitted 28 August, 2006; originally announced August 2006.

Comments: 8 pages, 5 figures; A high resolution version is available at http://www.roe.ac.uk/~npfl/Publications/lgw+06.ps.gz (Changed URL of high-res version)

Report number: lgw+06

Journal ref: In Proc. SPIE v. 6274, 62741F, Advanced Software and Control for Astronomy; Hilton Lewis, Alan Bridger, Eds.; 2006

Specsim: The MIRI Medium Resolution Spectrometer Simulator

Authors: Nuria P. F. Lorente, Alistair C. H. Glasse, Gillian S. Wright

Abstract: MIRI, the Mid-InfraRed Instrument, is one of four instruments being built for the James Webb Space Telescope. It is being developed jointly between an European Consortium (21 institutes from 10 countries, under the auspices of ESA), and the US. MIRI consists of an imager, a coronograph, a low-resolution spectrograph, and an Integral Field Unit (IFU) Medium Resolution Spectrometer (MIRI-MRS). The… ▽ More MIRI, the Mid-InfraRed Instrument, is one of four instruments being built for the James Webb Space Telescope. It is being developed jointly between an European Consortium (21 institutes from 10 countries, under the auspices of ESA), and the US. MIRI consists of an imager, a coronograph, a low-resolution spectrograph, and an Integral Field Unit (IFU) Medium Resolution Spectrometer (MIRI-MRS). The latter will be the first mid-infrared IFU spectrograph, and one of the first IFUs to be used in a space mission. To give the MIRI community a preview of the properties of the MIRI-MRS data products before the telescope is operational, the Specsim tool has been developed to model, in software, the operation of the spectrometer. Specsim generates synthetic data frames approximating those which will be taken by the instrument in orbit. The program models astronomical sources and transforms them into detector frames using the predicted optical properties of the telescope and MIRI. These frames can then be used to illustrate and inform a range of operational activities, including data calibration strategies and the development and testing of the data reduction software for the MIRI-MRS. Specsim will serve as a means of communication between the many consortium members by providing a way to easily illustrate the performance of the spectrometer under different circumstances, tolerances of components and design scenarios. △ Less

Submitted 1 November, 2005; originally announced November 2005.

Comments: 4 pages, 2 figures; contribution to the proceedings of ADASS XV 2-5 October, 2005