-
Developments on frequency domain multiplexing readout for large arrays of transition-edge sensor X-ray micro-calorimeters
Authors:
D. Vaccaro,
H. Akamatsu,
L. Gottardi,
M. de Wit,
M. P. Bruijn,
J. van der Kuur,
K. Nagayoshi,
E. Taralli,
K. Ravensberg,
J. R. Gao,
J. W. A. den Herder
Abstract:
At SRON we have been develo** X-ray TES micro-calorimeters as backup technology for the X-ray Integral Field Unit (X-IFU) of the Athena mission, demonstrating excellent resolving powers both under DC and AC bias. We also developed a frequency-domain multiplexing (FDM) readout technology, where each TES is coupled to a superconducting band-pass LC resonator and AC biased at MHz frequencies throug…
▽ More
At SRON we have been develo** X-ray TES micro-calorimeters as backup technology for the X-ray Integral Field Unit (X-IFU) of the Athena mission, demonstrating excellent resolving powers both under DC and AC bias. We also developed a frequency-domain multiplexing (FDM) readout technology, where each TES is coupled to a superconducting band-pass LC resonator and AC biased at MHz frequencies through a common readout line. The TES signals are summed at the input of a superconducting quantum interference device (SQUID), which performs a first amplification at cryogenic stage. Custom analog front-end electronics and digital boards take care of further amplifying the signals at room temperature and of the modulation/demodulation of the TES signals and bias carrier, respectively. We report on the most recent developments on our FDM technology, which involves a two-channel demonstration with a total of 70 pixels with a summed energy resolution of 2.34 +/- 0.02 eV at 5.9 keV without spectral performance degradation with respect to single-channel operation. Moreover, we discuss prospects towards the scaling-up to a larger multiplexing factor up to 78 pixels per channel in a 1-6 MHz readout bandwidth.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
System performance of a TDM test-bed with long flex harness towards the new X-IFU FPA-DM
Authors:
D. Vaccaro,
M. de Wit,
J. van der Kuur,
L. Gottardi,
K. Ravensberg,
E. Taralli,
J. Adams,
S. R. Bandler,
J. A. Chervenak,
W. B. Doriese,
M. Durkin,
C. Reintsema,
K. Sakai,
S. J. Smith,
N. A. Wakeham,
B. Jackson,
P. Khosropanah,
J. R. Gao,
J. W. A. den Herder,
P. Roelfsema
Abstract:
SRON (Netherlands Institute for Space Research) is develo** the Focal Plane Assembly (FPA) for Athena X-IFU, whose Demonstration Model (DM) will use for the first time a time domain multiplexing (TDM)-based readout system for the on-board transition-edge sensors (TES). We report on the characterization activities on a TDM setup provided by NASA Goddard Space Flight Center (GSFC) and National Ins…
▽ More
SRON (Netherlands Institute for Space Research) is develo** the Focal Plane Assembly (FPA) for Athena X-IFU, whose Demonstration Model (DM) will use for the first time a time domain multiplexing (TDM)-based readout system for the on-board transition-edge sensors (TES). We report on the characterization activities on a TDM setup provided by NASA Goddard Space Flight Center (GSFC) and National Institute for Standards and Technology (NIST) and tested in SRON cryogenic test facilities. The goal of these activities is to study the impact of the longer harness, closer to X-IFU specs, in a different EMI environment and switching from a single-ended to a differential readout scheme. In this contribution we describe the advancement in the debugging of the system in the SRON cryostat, which led to the demonstration of the nominal spectral performance of 2.8 eV at 5.9~keV with 16-row multiplexing, as well as an outlook for the future endeavours for the TDM readout integration on X-IFU's FPA-DM at SRON.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Hunting Galactic Axion Dark Matter with Gravitationally Lensed Fast Radio Bursts
Authors:
Ran Gao,
Zhengxiang Li,
Kai Liao,
He Gao,
Bing Zhang,
Zong-Hong Zhu
Abstract:
Ultralight axion or axionlike particles are one of the most promising candidates for dark matter because they are a well-motivated solution for the theoretical strong $CP$ problem and observational issues on small scales, i.e. the core-cusp problem and the satellite problem. A tiny coupling of axions and photons induces birefringence. We propose the differential birefringence measurements of multi…
▽ More
Ultralight axion or axionlike particles are one of the most promising candidates for dark matter because they are a well-motivated solution for the theoretical strong $CP$ problem and observational issues on small scales, i.e. the core-cusp problem and the satellite problem. A tiny coupling of axions and photons induces birefringence. We propose the differential birefringence measurements of multiple images of gravitationally lensed fast radio burst (FRB) systems as probes of the Galactic axion dark matter (ADM) background. In addition to general advantages of lensing systems, i.e. alleviating systematics and intrinsic astrophysical dependencies, precise measurements of lensing time delay and polarization angle in gravitationally lensed FRB systems make them a more robust and powerful probe. We show that, with a single lensed FRB system (which may be detected in large numbers in the SKA era), the axion-photon coupling under the ADM background could be constrained to be $g_{aγ} < 7.3 \times 10^{-11}~ \mathrm{GeV^{-1}}$ for an axion mass $m_a\sim10^{-20}~\mathrm{eV}$. This will be of great significance in achieving synergistic searches of the Galactic ADM with other astrophysical probes and laboratorial experiments.
△ Less
Submitted 21 December, 2023; v1 submitted 20 December, 2023;
originally announced December 2023.
-
Compact Metasurface Terahertz Spectrometer
Authors:
Wenye Ji,
** Chang,
Behnam Mirzaei,
Marcel Ridder,
Willem Jellema,
Wilt Kao,
Alan Lee,
Jian Rong Gao,
Paul Urbach,
Aurele J. L. Adam
Abstract:
The electromagnetic spectrum in the terahertz frequency region is of significant importance for understanding the formation and evolution of galaxies and stars throughout the history of the universe and the process of planet formation. Within the star forming clouds the constituent atoms and molecules are excited to produce characteristic emission and absorption lines, many of which happen at the…
▽ More
The electromagnetic spectrum in the terahertz frequency region is of significant importance for understanding the formation and evolution of galaxies and stars throughout the history of the universe and the process of planet formation. Within the star forming clouds the constituent atoms and molecules are excited to produce characteristic emission and absorption lines, many of which happen at the terahertz frequencies. Thus, detecting the spectral signatures as unique fingerprints of molecules and atoms require terahertz spectrometers, which need to be operated in a space observatory because of the water vapor absorption in the earth atmosphere. However, current terahertz spectrometers face several challenges that limit their performances and applications, including a low resolution, limited bandwidth, large volume, and complexity. In this paper, we address the last two issues by demonstrating a concept of a compact terahertz spectrometer using metasurface. We start by modelling, designing, and fabricating a metasurface, aiming to optimize its performance within a band from 1.7 to 2.5 THz. Next, we make use of an array of quantum cascade lasers that operate at slightly different frequencies around 2.1 THz to validate the performance of the spectrometer. Finally, we apply the spectrum inversion method to analyse the measured data to confirm a resolution R of at least 273. Our results demonstrated a miniaturized terahertz spectrometer concept successfully.
△ Less
Submitted 5 September, 2023;
originally announced September 2023.
-
The Lobster Eye Imager for Astronomy Onboard the SATech-01 Satellite
Authors:
Z. X. Ling,
X. J. Sun,
C. Zhang,
S. L. Sun,
G. **,
S. N. Zhang,
X. F. Zhang,
J. B. Chang,
F. S. Chen,
Y. F. Chen,
Z. W. Cheng,
W. Fu,
Y. X. Han,
H. Li,
J. F. Li,
Y. Li,
Z. D. Li,
P. R. Liu,
Y. H. Lv,
X. H. Ma,
Y. J. Tang,
C. B. Wang,
R. J. Xie,
Y. L. Xue,
A. L. Yan
, et al. (101 additional authors not shown)
Abstract:
The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (Fo…
▽ More
The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (FoV) of 346 square degrees (18.6 degrees * 18.6 degrees) of the X-ray imager is realized. An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons, and four large-format complementary metal-oxide semiconductor (CMOS) sensors, each of 6 cm * 6 cm, are used as the focal plane detectors. The instrument has an angular resolution of 4 - 8 arcmin (in FWHM) for the central focal spot of the point spread function, and an effective area of 2 - 3 cm2 at 1 keV in essentially all the directions within the field of view. The detection passband is 0.5 - 4 keV in the soft X-rays and the sensitivity is 2 - 3 * 10-11 erg s-1 cm-2 (about 1 mini-Crab) at 1,000 second observation. The total weight of LEIA is 56 kg and the power is 85 W. The satellite, with a design lifetime of 2 years, operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes. LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation, and by optimizing the working setups of the instrumental parameters. In addition, LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band, albeit limited useful observing time available.
△ Less
Submitted 24 May, 2023;
originally announced May 2023.
-
Dynamically Stable Radiation Pressure Propulsion of Flexible Lightsails for Interstellar Exploration
Authors:
Ramon Gao,
Michael D. Kelzenberg,
Harry A. Atwater
Abstract:
Lightsail spacecraft, propelled to relativistic velocities via photon pressure using high power density laser radiation, offer a potentially new route to space exploration within and beyond the solar system, extending to interstellar distances. Such missions will require meter-scale lightsails of submicron thickness, posing substantial challenges for materials science and engineering. We analyze t…
▽ More
Lightsail spacecraft, propelled to relativistic velocities via photon pressure using high power density laser radiation, offer a potentially new route to space exploration within and beyond the solar system, extending to interstellar distances. Such missions will require meter-scale lightsails of submicron thickness, posing substantial challenges for materials science and engineering. We analyze the structural and photonic design of flexible lightsails, develo** a mesh-based multiphysics simulator based on linear elastic theory, treating the lightsail as a flexible membrane rather than a rigid body. We find that flexible lightsail membranes can be spin stabilized to prevent shape collapse during acceleration, and that certain lightsail shapes and designs offer beam-riding stability despite the deformations caused by photon pressure and thermal expansion. Excitingly, nanophotonic lightsails based on planar silicon nitride membranes patterned with suitably designed optical metagratings exhibit both mechanically and dynamically stable propulsion along the pump laser axis. These advances suggest that laser-driven acceleration of membrane-like lightsails to the relativistic speeds needed to access interstellar distances is conceptually feasible, and that fabrication of such lightsails may be within the reach of modern microfabrication technology.
△ Less
Submitted 21 January, 2023;
originally announced January 2023.
-
Expected geoneutrino signal at JUNO using local integrated 3-D refined crustal model
Authors:
Ran Han,
ZhiWei Li,
Ruohan Gao,
Yao Sun,
Ya Xu,
Yufei Xi,
Guangzheng Jiang,
Andong Wang,
Ya** Cheng,
Yao Sun,
Jie Pang,
Qi Hua,
Liangjian Wen,
Liang Zhan,
Yu-Feng Li
Abstract:
Geoneutrinos serve as a potent tool for comprehending the radiogenic power and composition of Earth. Although geoneutrinos have been observed in prior experiments, the forthcoming generation of experiments,such as JUNO, will be necessary for fully harnessing their potential. Precise prediction of the crustal contribution is vital for interpreting particlephysics measurements in the context of geo-…
▽ More
Geoneutrinos serve as a potent tool for comprehending the radiogenic power and composition of Earth. Although geoneutrinos have been observed in prior experiments, the forthcoming generation of experiments,such as JUNO, will be necessary for fully harnessing their potential. Precise prediction of the crustal contribution is vital for interpreting particlephysics measurements in the context of geo-scientific inquiries. Nonetheless, existing models such as JULOC and GIGJ have limitations in accurately forecasting the crustal contribution. This paper introduces JULOCI, the novel 3-D integrated crustal model of JUNO, which employs seismic, gravity, rock sample, and heat flow data to precisely estimate the geoneutrino signal of the lithosphere. The model indicates elevated concentrations of uranium and thorium in southern China, resulting in unexpectedly strong geoneutrino signals.The accuracy of JULOC-I, coupled with a decade of experimental data, affords JUNO the opportunity to test multiple mantle models. Once operational, JUNO can validate the model predictions and enhance the precision of mantle measurements. All in all, the improved accuracy ofJULOC-I represents a substantial stride towards comprehending the geochemical distribution of the South China crust, offering a valuable tool for investigating the composition and evolution of the Earth through geoneutrinos.
△ Less
Submitted 6 March, 2024; v1 submitted 17 October, 2022;
originally announced October 2022.
-
Prospects of strongly lensed fast radio bursts: Simultaneous measurement of post-Newtonian parameter and Hubble constant
Authors:
Ran Gao,
Zhengxiang Li,
He Gao
Abstract:
Strong gravitational lensing effect is a powerful tool to probe cosmological models and gravity theories. Recently, the time-delay cosmography from strong lensing and the stellar kinematics of the deflector, which encode the Hubble constant and the post-Newtonian parameter via two distance ratios reflecting the lensing mass and dynamical mass respectively, have been proposed to investigate these t…
▽ More
Strong gravitational lensing effect is a powerful tool to probe cosmological models and gravity theories. Recently, the time-delay cosmography from strong lensing and the stellar kinematics of the deflector, which encode the Hubble constant and the post-Newtonian parameter via two distance ratios reflecting the lensing mass and dynamical mass respectively, have been proposed to investigate these two parameters simultaneously. Among strong lensing systems with different sources, strongly lensed fast radio bursts (FRBs) have been proposed as precision probes of the universe since the time delay $\sim$ 10 days between images could be measured extremely precisely because of their short duration of a few milliseconds. In this work, we investigate the ability of strongly lensed FRBs on simultaneously estimating these two parameters via simulations. Take the expected FRB detection rate of upcoming facilities and lensing probability into consideration, it is likely to accumulate 10 lensed FRBs in several years and we find that $H_0$ could be determined to a $\sim1.5\%$ precision and $γ_{\rm PPN}$ could be constrained to a $\sim8.7\%$ precision simultaneously from them. These simultaneous estimations will be helpful for properly reflecting the possible correlation between these two fundamental parameters.
△ Less
Submitted 22 August, 2022;
originally announced August 2022.
-
The Design and Performance of Charged Particle Detector onboard the GECAM Mission
Authors:
Y. B. Xu,
X. L. Sun,
S. Yang,
X. Q. Li,
W. X. Peng,
K. Gong,
X. H. Liang,
Y. Q. Liu,
D. Y. Guo,
H. Wang,
C. Y. Li,
Z. H. An,
J. J. He,
X. J. Liu,
S. L. Xiong,
X. Y. Wen,
Fan Zhang,
D. L. Zhang,
X. Y. Zhao,
C. Y. Zhang,
C. Cai,
Z. Chang,
G. Chen,
C. Chen,
Y. Y. Du
, et al. (25 additional authors not shown)
Abstract:
The Gravitational Wave highly energetic Electromagnetic Counterpart All-sky Monitor (GECAM) is dedicated to detecting gravitational wave gamma-ray bursts. It is capable of all-sky monitoring over and discovering gamma-ray bursts and new radiation phenomena. GECAM consists of two microsatellites, each equipped with 8 charged particle detectors (CPDs) and 25 gamma-ray detectors (GRDs). The CPD is us…
▽ More
The Gravitational Wave highly energetic Electromagnetic Counterpart All-sky Monitor (GECAM) is dedicated to detecting gravitational wave gamma-ray bursts. It is capable of all-sky monitoring over and discovering gamma-ray bursts and new radiation phenomena. GECAM consists of two microsatellites, each equipped with 8 charged particle detectors (CPDs) and 25 gamma-ray detectors (GRDs). The CPD is used to measure charged particles in the space environment, monitor energy and flow intensity changes, and identify between gamma-ray bursts and space charged particle events in conjunction with GRD. CPD uses plastic scintillator as the sensitive material for detection, silicon photomultiplier (SiPM) array as the optically readable device, and the inlaid Am-241 radioactive source as the onboard calibration means. In this paper, we will present the working principle, physical design, functional implementation and preliminary performance test results of the CPD.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
The In-Flight Realtime Trigger and Localization Software of GECAM
Authors:
Xiao-Yun Zhao,
Shao-Lin Xiong,
Xiang-Yang Wen,
Xin-Qiao Li,
Ce Cai,
Shuo Xiao,
Qi Luo,
Wen-Xi Peng,
Dong-Ya Guo,
Zheng-Hua An,
Ke Gong,
**-Yuan Liao,
Yan-Qiu Zhang,
Yue Huang,
Lu Li,
Xing Wen,
Fei Zhang,
**g Duan,
Chen-Wei Wang,
Dong-Li Shi,
Peng Zhang,
Qi-Bin Yi,
Chao-Yang Li,
Yan-Bing Xu,
Xiao-Hua Liang
, et al. (64 additional authors not shown)
Abstract:
Realtime trigger and localization of bursts are the key functions of GECAM, which is an all-sky gamma-ray monitor launched in Dec 10, 2020. We developed a multifunctional trigger and localization software operating on the CPU of the GECAM electronic box (EBOX). This onboard software has the following features: high trigger efficiency for real celestial bursts with a suppression of false triggers c…
▽ More
Realtime trigger and localization of bursts are the key functions of GECAM, which is an all-sky gamma-ray monitor launched in Dec 10, 2020. We developed a multifunctional trigger and localization software operating on the CPU of the GECAM electronic box (EBOX). This onboard software has the following features: high trigger efficiency for real celestial bursts with a suppression of false triggers caused by charged particle bursts and background fluctuation, dedicated localization algorithm optimized for short and long bursts respetively, short time latency of the trigger information which is downlinked throught the BeiDou satellite navigation System (BDS). This paper presents the detailed design and deveopment of this trigger and localization software system of GECAM, including the main functions, general design, workflow and algorithms, as well as the verification and demonstration of this software, including the on-ground trigger tests with simulated gamma-ray bursts made by a dedicated X-ray tube and the in-flight performance to real gamma-ray bursts and magnetar bursts.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Ground-based calibration and characterization of GRD of GECAM: 8-160 keV
Authors:
J. J. He,
Z. H. An,
W. X. Peng,
X. Q. Li,
S. L. Xiong,
D. L. Zhang,
R. Qiao,
D. Y. Guo,
C. Cai,
Z. Chang,
C. Chen,
G. Chen,
Y. Y. Du,
M. Gao,
R. Gao,
K. Gong,
D. J. Hou,
C. Y. Li,
G. Li,
L. Li,
M. S. Li,
X. B. Li,
X. F. Li,
Y. G. Li,
X. H. Liang
, et al. (36 additional authors not shown)
Abstract:
As the main detector of the GECAM satellite, the calibration of the energy response and detection efficiency of the GRD detector is the main content of the ground-based calibration. The calibration goal requires the calibrated energy points to sample the full energy range (8 keV-2 MeV) as much as possible. The low energy band (8-160 keV) is calibrated with the X-ray beam, while the high energy ban…
▽ More
As the main detector of the GECAM satellite, the calibration of the energy response and detection efficiency of the GRD detector is the main content of the ground-based calibration. The calibration goal requires the calibrated energy points to sample the full energy range (8 keV-2 MeV) as much as possible. The low energy band (8-160 keV) is calibrated with the X-ray beam, while the high energy band (>160 keV) with radioactive sources. This article mainly focuses on the calibration of the energy response and detection efficiency in the 8-160 keV with a refined measurement around the absorption edges of the lanthanum bromide crystal. The GRD performances for different crystal types, data acquisition modes, working modes, and incident positions are also analyzed in detail. We show that the calibration campaign is comprehensive, and the calibration results are generally consistent with simulations as expected.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
The SiPM Array Data Acquisition Algorithm Applied to the GECAM Satellite Payload
Authors:
Y. Q. Liu,
K. Gong,
X. Q. Li,
X. Y. Wen,
Z. H. An,
C. Cai,
Z. Chang,
G. Chen,
C. Chen,
Y. Y. Du,
M. Gao,
R. Gao,
D. Y. Guo,
J. J. He,
D. J. Hou,
Y. G. Li,
C. Y. Li,
G. Li,
L. Li,
X. F. Li,
M. S. Li,
X. H. Liang,
X. J. Liu,
F. J. Lu,
H. Lu
, et al. (25 additional authors not shown)
Abstract:
The Gravitational Wave Burst High-energy Electromagnetic Counterpart All-sky Monitor (GECAM), consists of 2 small satellites that each contain 25 LaBr3 (lanthanum bromide doped with cerium chloride) detectors and 8 plastic scintillator detectors. The detector signals are read out using a silicon photomultiplier (SiPM) array. In this study, an acquisition algorithm for in-orbit real-time SiPM array…
▽ More
The Gravitational Wave Burst High-energy Electromagnetic Counterpart All-sky Monitor (GECAM), consists of 2 small satellites that each contain 25 LaBr3 (lanthanum bromide doped with cerium chloride) detectors and 8 plastic scintillator detectors. The detector signals are read out using a silicon photomultiplier (SiPM) array. In this study, an acquisition algorithm for in-orbit real-time SiPM array data is designed and implemented, and the output event packet is defined. Finally, the algorithm's efficacy for event acquisition is verified.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
The design and performance of GRD onboard the GECAM satellite
Authors:
Z. H. An,
X. L. Sun,
D. L. Zhang,
S. Yang,
X. Q. Li,
X. Y. Wen,
K. Gong,
X. H. Liang,
X. J. Liu,
Y. Q. Liu,
Y. G. Li,
S. L. Xiong,
Y. B. Xu,
Fan Zhang,
X. Y. Zhao,
C. Cai,
Z. Chang,
G. Chen,
C. Chen,
Y. Y. Du,
P. Y. Feng,
M. Gao,
R. Gao,
D. Y. Guo,
J. J. He
, et al. (26 additional authors not shown)
Abstract:
Background: Each GECAM satellite payload contains 25 gamma-ray detectors (GRDs), which can detect gamma-rays and particles and can roughly localize the Gamma-Ray Bursts (GRBs). GRD was designed using lanthanum bromide (LaBr3) crystal as the sensitive material with the rear end coupled with silicon photomultiplier (SiPM) array for readout. Purpose: In aerospace engineering design of GRD, there are…
▽ More
Background: Each GECAM satellite payload contains 25 gamma-ray detectors (GRDs), which can detect gamma-rays and particles and can roughly localize the Gamma-Ray Bursts (GRBs). GRD was designed using lanthanum bromide (LaBr3) crystal as the sensitive material with the rear end coupled with silicon photomultiplier (SiPM) array for readout. Purpose: In aerospace engineering design of GRD, there are many key points to be studied. In this paper, we present the specific design scheme of GRD, the assembly and the performance test results of detectors. Methods: Based on Monte Carlo simulation and experimental test results, the specific schematic design and assembling process ofGRDwere optimized. After being fully assembled, theGRDswere conducted performance tests by using radioactive source and also conducted random vibration tests. Result and conclusion: The test results show that all satellite-borne GRDs have energy resolution <16% at 59.5 keV, meeting requirements of satellite in scientific performance. The random vibration test shows that GRD can maintain in a stable performance, which meets the requirement of spatial application.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Dedicated SiPM array for GRD of GECAM
Authors:
D. L. Zhang,
X. L. Sun,
Z. H. An,
X. Q. Li,
X. Y. Wen,
K. Gong,
C. Cai,
Z. Chang,
G. Chen,
C. Chen,
Y. Y. Du,
M. Gao,
R. Gao,
D. Y. Guo,
J. J. He,
D. J. Hou,
Y. G. Li,
C. Y. Li,
G. Li,
L. Li,
X. F. Li,
M. S. Li,
X. H. Liang,
X. J. Liu,
Y. Q. Liu
, et al. (23 additional authors not shown)
Abstract:
The discovery of gravitational waves and gamma-ray bursts heralds the era of multi-messenger astronomy. With the adoption of two small satellites to achieve the all-sky monitoring of gamma-ray bursts, the gravitational wave high-energy electromagnetic counterpart all-sky monitor (GECAM) possesses a quasi-real-time early warning ability and plays an important role in positioning the sources of grav…
▽ More
The discovery of gravitational waves and gamma-ray bursts heralds the era of multi-messenger astronomy. With the adoption of two small satellites to achieve the all-sky monitoring of gamma-ray bursts, the gravitational wave high-energy electromagnetic counterpart all-sky monitor (GECAM) possesses a quasi-real-time early warning ability and plays an important role in positioning the sources of gravitational waves and in subsequent observations.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Demonstration of MHz frequency domain multiplexing readout of 37 transition edge sensors for high-resolution x-ray imaging spectrometers
Authors:
H. Akamatsu,
D. Vaccaro,
L. Gottardi,
J. van der Kuur,
C. P. de Vries,
M. Kiviranta,
K. Ravensberg,
M. D'Andrea,
E. Taralli,
M. de Wit,
M. P. Bruijn,
P. van der Hulst,
R. H. den Hartog,
B-J. van Leeuwen,
A. J. van der Linden,
A. J McCalden,
K. Nagayoshi,
A. C. T. Nieuwenhuizen,
M. L. Ridder,
S. Visser,
P. van Winden,
J. R. Gao,
R. W. M. Hoogeveen,
B. D. Jackson,
J-W. A. den Herder
Abstract:
We report on the development and demonstration of a MHz frequency domain multiplexing (FDM) technology to read out arrays of cryogenic transition edge sensor (TES) X-ray microcalorimeters. In our FDM scheme, TESs are AC-biased at different resonant frequencies in the low MHz range through an array of high-$Q$ LC resonators. The current signals of all TESs are summed at superconducting quantum inte…
▽ More
We report on the development and demonstration of a MHz frequency domain multiplexing (FDM) technology to read out arrays of cryogenic transition edge sensor (TES) X-ray microcalorimeters. In our FDM scheme, TESs are AC-biased at different resonant frequencies in the low MHz range through an array of high-$Q$ LC resonators. The current signals of all TESs are summed at superconducting quantum interference devices (SQUIDs). We have demonstrated multiplexing for a readout of 31 pixels using room temperature electronics, high-$Q$ LC filters and TES arrays developed at SRON, and SQUID arrays from VTT. We repeated this on a second setup with 37 pixels. The summed X-ray spectral resolutions $@$ 5.9 keV are $ΔE_{\rm 31 pix ~MUX}=2.14\pm0.03$ eV and $ΔE_{\rm 37 pix ~MUX}=2.23\pm0.03$ eV. The demonstrated results are comparable with other multiplexing approaches. There is potential to further improve the spectral resolution and to increase the number of multiplexed TESs, and to open up applications for TES X-ray microcalorimeters.
△ Less
Submitted 2 November, 2021;
originally announced November 2021.
-
High Aspect Ratio Transition Edge Sensors for X-ray Spectrometry
Authors:
M. de Wit,
L. Gottardi,
E. Taralli,
K. Nagayoshi,
M. L. Ridder,
H. Akamatsu,
M. P. Bruijn,
M. D'Andrea,
J. van der Kuur,
K. Ravensberg,
D. Vaccaro,
S. Visser,
J. R. Gao,
J. -W. A. den Herder
Abstract:
We are develo** large TES arrays in combination with FDM readout for the next generation of X-ray space observatories. For operation under AC-bias, the TESs have to be carefully designed and optimized. In particular, the use of high aspect ratio devices will help to mitigate non-ideal behaviour due to the weak-link effect. In this paper, we present a full characterization of a TES array containi…
▽ More
We are develo** large TES arrays in combination with FDM readout for the next generation of X-ray space observatories. For operation under AC-bias, the TESs have to be carefully designed and optimized. In particular, the use of high aspect ratio devices will help to mitigate non-ideal behaviour due to the weak-link effect. In this paper, we present a full characterization of a TES array containing five different device geometries, with aspect ratios (width:length) ranging from 1:2 up to 1:6. The complex impedance of all geometries is measured in different bias configurations to study the evolution of the small-signal limit superconducting transition parameters, as well as the excess noise. We show that high aspect ratio devices with properly tuned critical temperatures (around 90 mK) can achieve excellent energy resolution, with an array average of 2.03 +- 0.17 eV at 5.9 keV and a best achieved resolution of 1.63 +- 0.17 eV. This demonstrates that AC-biased TESs can achieve a very competitive performance compared to DC-biased TESs. The results have motivated a push to even more extreme device geometries currently in development.
△ Less
Submitted 20 July, 2021;
originally announced July 2021.
-
Multiple HC$_3$N line observations towards 19 Galactic massive star-forming regions
Authors:
Huanxue Feng,
Junzhi Wang,
Shanghuo Li,
Yong Shi,
Fengyao Zhu,
Minzhi Kong,
Ripeng Gao,
Fei Li
Abstract:
We performed observations of the HC$_3$N (24-23, 17-16, 11-10, 8-7) lines towards a sample consisting of 19 Galactic massive star-forming regions with the Arizona Radio Observatory 12-m and Caltech Submillimeter Observatory 10.4-m telescopes. HC$_3$N (24-23, 17-16, 11-10, 8-7) lines were detected in sources except for W44, where only HC$_3$N (17-16, 11-10) were detected. Twelve of the nineteen sou…
▽ More
We performed observations of the HC$_3$N (24-23, 17-16, 11-10, 8-7) lines towards a sample consisting of 19 Galactic massive star-forming regions with the Arizona Radio Observatory 12-m and Caltech Submillimeter Observatory 10.4-m telescopes. HC$_3$N (24-23, 17-16, 11-10, 8-7) lines were detected in sources except for W44, where only HC$_3$N (17-16, 11-10) were detected. Twelve of the nineteen sources showed probable line wing features. The excitation temperatures were estimated from the line ratio of HC$_3$N (24-23) to HC$_3$N (17-16) for 18 sources and are in the range 23-57 K. The line widths of higher-$J$ transitions are larger than lower-$J$ ones for most sources. This indicates that the inner dense warm regions have more violent turbulence or other motions (such as rotation) than outer regions in these sources. A possible cutoff tendency was found around $L_{\rm IR}$ $\sim$ 10$^{6}$ $L_\odot$ in the relation between $L_{\rm IR}$ and full width at half maximum line widths.
△ Less
Submitted 8 March, 2021; v1 submitted 3 March, 2021;
originally announced March 2021.
-
TiAu TES 32$\times$32 pixel array: uniformity, thermal crosstalk and performance at different X-ray energies
Authors:
E. Taralli,
M. D'Andrea,
L. Gottardi,
K. Nagayoshi,
M. Ridder,
S. Visser,
M. de Wit,
D. Vaccaro,
H. Akamatsu,
K. Ravensberg,
R. Hoogeveen,
M. Bruijn,
J. R. Gao
Abstract:
Large format arrays of transition edge sensor (TES) are crucial for the next generation of X-ray space observatories. Such arrays are required to achieve an energy resolution of $\mathrmΔE<$3 eV full-width-half-maximum (FWHM) in the soft X-ray energy range. We are currently develo** X-ray microcalorimeter arrays as a backup option for the X-IFU instrument on board of ATHENA space telescope, led…
▽ More
Large format arrays of transition edge sensor (TES) are crucial for the next generation of X-ray space observatories. Such arrays are required to achieve an energy resolution of $\mathrmΔE<$3 eV full-width-half-maximum (FWHM) in the soft X-ray energy range. We are currently develo** X-ray microcalorimeter arrays as a backup option for the X-IFU instrument on board of ATHENA space telescope, led by ESA and foreseen to be launched in 2031. In this contribution, we report on the development and the characterization of a uniform 32$\times$32 pixel array with (length$\times $width) 140$\times$30 $μ$m$^2$ TiAu TESs, which have \textcolor{black}{a 2.3 $μ$m} thick Au absorber for X-ray photons. The pixels have a typical normal resistance $R_\mathrm{n}$ = 121 m$Ω$ and a critical temperature $T_\mathrm{c}\sim$ 90 mK. We performed extensive measurements on 60 pixels out of the array in order to show the uniformity of the array. We obtained an energy resolutions between 2.4 and 2.6 eV (FWHM) at 5.9 keV, measured in a single-pixel mode at AC bias frequencies ranging from 1 to 5 MHz, with a frequency domain multiplexing (FDM) readout system, which is developed at SRON/VTT. We also present the detector energy resolution at X-ray with different photon energies generated by a modulated external X-ray source from 1.45 keV up to 8.9 keV. Multiplexing readout across several pixels has also been performed to evaluate the impact of the thermal crosstalk to the instrument's energy resolution budget requirement. This value results in a derived requirement, for the first neighbour, that is less than 1$\times$10$^{-3}$ when considering the ratio between the amplitude of the crosstalk signal to an X-ray pulse (for example at 5.9 keV)
△ Less
Submitted 19 February, 2021;
originally announced February 2021.
-
Performance and uniformity of a kilo-pixel array of Ti/Au transition-edge sensor microcalorimeters
Authors:
E. Taralli,
M. D'Andrea,
L. Gottardi,
K. Nagayoshi,
M. L. Ridder,
M. de Wit,
D. Vaccaro,
H. Akamatsu,
M. P. Bruijn,
J. R. Gao
Abstract:
Uniform large transition-edge sensor (TES) arrays are fundamental for the next generation of X-ray space observatories. These arrays are required to achieve an energy resolution $ΔE$ < 3 eV full-width-half-maximum (FWHM) in the soft X-ray energy range. We are currently develo** X-ray microcalorimeter arrays for use in future laboratory and space-based X-ray astrophysics experiments and ground-ba…
▽ More
Uniform large transition-edge sensor (TES) arrays are fundamental for the next generation of X-ray space observatories. These arrays are required to achieve an energy resolution $ΔE$ < 3 eV full-width-half-maximum (FWHM) in the soft X-ray energy range. We are currently develo** X-ray microcalorimeter arrays for use in future laboratory and space-based X-ray astrophysics experiments and ground-based spectrometers.
In this contribution we report on the development and the characterization of a uniform 32$\times$32 pixel array with 140$\times$30 $μ$m$^2$ Ti/Au TESs with Au X-ray absorber. We report upon extensive measurements on 60 pixels in order to show the uniformity of our large TES array. The averaged critical temperature is $T_\mathrm{c}$ = 89.5$\pm$0.5 mK and the variation across the array ($\sim$1 cm) is less than 1.5 mK. We found a large region of detector's bias points between 20\% and 40\% of the normal-state resistance where the energy resolution is constantly lower than 3 eV. In particular, results show a summed X-ray spectral resolution $ΔE_\mathrm{FWHM}$ = 2.50$\pm$0.04 eV at a photon energy of 5.9 keV, measured in a single-pixel mode using a frequency domain multiplexing (FDM) readout system developed at SRON/VTT at bias frequencies ranging from 1 to 5 MHz. Moreover we compare the logarithmic resistance sensitivity with respect to temperature and current ($α$ and $β$ respectively) and their correlation with the detector's noise parameter $M$, showing an homogeneous behaviour for all the measured pixels in the array.
△ Less
Submitted 18 February, 2021;
originally announced February 2021.
-
Frequency Shift Algorithm: Application to a Frequency-Domain Multiplexing Readout of X-ray Transition-Edge Sensor Microcalorimeters
Authors:
D. Vaccaro,
H. Akamatsu,
J. van der Kuur,
P. van der Hulst,
A. C. T. Nieuwenhuizen,
P. van Winden,
L. Gottardi,
R. den Hartog,
M. P. Bruijn,
M. D'Andrea,
J. R. Gao,
J. W. A. den Herder,
R. W. M. Hoogeveen,
B. Jackson,
A. J. van der Linden,
K. Nagayoshi,
K. Ravensberg,
M. L. Ridder,
E. Taralli,
M. de Wit
Abstract:
In the frequency-domain multiplexing (FDM) scheme, transition-edge sensors (TES) are individually coupled to superconducting LC filters and AC biased at MHz frequencies through a common readout line. To make efficient use of the available readout bandwidth and to minimize the effect of non-linearities, the LC resonators are usually designed to be on a regular grid. The lithographic processes howev…
▽ More
In the frequency-domain multiplexing (FDM) scheme, transition-edge sensors (TES) are individually coupled to superconducting LC filters and AC biased at MHz frequencies through a common readout line. To make efficient use of the available readout bandwidth and to minimize the effect of non-linearities, the LC resonators are usually designed to be on a regular grid. The lithographic processes however pose a limit on the accuracy of the effective filter resonance frequencies. Off-resonance bias carriers could be used to suppress the impact of intermodulation distortions, which nonetheless would significantly affect the effective bias circuit and the detector spectral performance. In this paper we present a frequency shift algorithm (FSA) to allow off-resonance readout of TES's while preserving the on-resonance bias circuit and spectral performance, demonstrating its application to the FDM readout of a X-ray TES microcalorimeter array. We discuss the benefits in terms of mitigation of the impact of intermodulation distortions at the cost of increased bias voltage and the scalability of the algorithm to multi-pixel FDM readout. We show that with FSA, in multi-pixel and frequencies shifted on-grid, the line noises due to intermodulation distortion are placed away from the sensitive region in the TES response and the X-ray performance is consistent with the single-pixel, on-resonance level.
△ Less
Submitted 11 February, 2021;
originally announced February 2021.
-
Overview of the Medium and High Frequency Telescopes of the LiteBIRD satellite mission
Authors:
L. Montier,
B. Mot,
P. de Bernardis,
B. Maffei,
G. Pisano,
F. Columbro,
J. E. Gudmundsson,
S. Henrot-Versillé,
L. Lamagna,
J. Montgomery,
T. Prouvé,
M. Russell,
G. Savini,
S. Stever,
K. L. Thompson,
M. Tsujimoto,
C. Tucker,
B. Westbrook,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien
, et al. (212 additional authors not shown)
Abstract:
LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular…
▽ More
LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular scales, and over 15 frequency bands from 34GHz to 448GHz. The LiteBIRD instruments consist of three telescopes, namely the Low-, Medium- and High-Frequency Telescope (respectively LFT, MFT and HFT). We present in this paper an overview of the design of the Medium-Frequency Telescope (89-224GHz) and the High-Frequency Telescope (166-448GHz), the so-called MHFT, under European responsibility, which are two cryogenic refractive telescopes cooled down to 5K. They include a continuous rotating half-wave plate as the first optical element, two high-density polyethylene (HDPE) lenses and more than three thousand transition-edge sensor (TES) detectors cooled to 100mK. We provide an overview of the concept design and the remaining specific challenges that we have to face in order to achieve the scientific goals of LiteBIRD.
△ Less
Submitted 1 February, 2021;
originally announced February 2021.
-
LiteBIRD: JAXA's new strategic L-class mission for all-sky surveys of cosmic microwave background polarization
Authors:
M. Hazumi,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien,
J. Austermann,
C. Baccigalupi,
A. J. Banday,
R. Banjeri,
R. B. Barreiro,
S. Basak,
J. Beall,
D. Beck,
S. Beckman,
J. Bermejo,
P. de Bernardis,
M. Bersanelli,
J. Bonis,
J. Borrill,
F. Boulanger,
S. Bounissou,
M. Brilenkov
, et al. (213 additional authors not shown)
Abstract:
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave backgrou…
▽ More
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave background (CMB) polarization over the full sky with unprecedented precision. Its main scientific objective is to carry out a definitive search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with an insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. To this end, LiteBIRD will perform full-sky surveys for three years at the Sun-Earth Lagrangian point L2 for 15 frequency bands between 34 and 448 GHz with three telescopes, to achieve a total sensitivity of 2.16 micro K-arcmin with a typical angular resolution of 0.5 deg. at 100GHz. We provide an overview of the LiteBIRD project, including scientific objectives, mission requirements, top-level system requirements, operation concept, and expected scientific outcomes.
△ Less
Submitted 29 January, 2021;
originally announced January 2021.
-
Concept Design of Low Frequency Telescope for CMB B-mode Polarization satellite LiteBIRD
Authors:
Y. Sekimoto,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien,
J. Austermann,
C. Baccigalupi,
A. J. Banday,
R. Banerji,
R. B. Barreiro,
S. Basak,
J. Beall,
D. Beck,
S. Beckman,
J. Bermejo,
P. de Bernardis,
M. Bersanelli,
J. Bonis,
J. Borrill,
F. Boulanger,
S. Bounissou,
M. Brilenkov
, et al. (212 additional authors not shown)
Abstract:
LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray li…
▽ More
LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray light increase with a wider FoV and the far sidelobe knowledge of $-56$ dB is a challenging optical requirement. A crossed-Dragone configuration was chosen for the low frequency telescope (LFT : 34--161 GHz), one of LiteBIRD's onboard telescopes. It has a wide field-of-view ($18^\circ \times 9^\circ$) with an aperture of 400 mm in diameter, corresponding to an angular resolution of about 30 arcminutes around 100 GHz. The focal ratio f/3.0 and the crossing angle of the optical axes of 90$^\circ$ are chosen after an extensive study of the stray light. The primary and secondary reflectors have rectangular shapes with serrations to reduce the diffraction pattern from the edges of the mirrors. The reflectors and structure are made of aluminum to proportionally contract from warm down to the operating temperature at $5\,$K. A 1/4 scaled model of the LFT has been developed to validate the wide field-of-view design and to demonstrate the reduced far sidelobes. A polarization modulation unit (PMU), realized with a half-wave plate (HWP) is placed in front of the aperture stop, the entrance pupil of this system. A large focal plane with approximately 1000 AlMn TES detectors and frequency multiplexing SQUID amplifiers is cooled to 100 mK. The lens and sinuous antennas have broadband capability. Performance specifications of the LFT and an outline of the proposed verification plan are presented.
△ Less
Submitted 15 January, 2021;
originally announced January 2021.
-
Probing ISM Structure in Trumpler 14 & Carina I Using The Stratospheric Terahertz Observatory 2
Authors:
Young Min Seo,
Paul F. Goldsmith,
Chris Walker,
David J. Hollenbach,
Mark G. Wolfire,
Craig Kulesa,
Volker Tolls,
Pietro N. Bernasconi,
Umit Kavak,
Floris F. S. van der Tak,
Russ Shipman,
Jian Rong Gao,
Alexander Tielens,
Michael G. Burton,
Harold Yorke,
Erick Young,
William L. Peters,
Abram Young,
Christopher Groppi,
Kristina Davis,
Jorge L. Pineda,
William D. Langer,
Jonathan H. Kawamura,
Antony Stark,
Gary Melnick
, et al. (4 additional authors not shown)
Abstract:
We present observations of the Trumpler 14/Carina I region carried out using the Stratospheric Terahertz Observatory 2 (STO2). The Trumpler 14/Carina I region is in the west part of the Carina Nebula Complex, which is one of the most extreme star-forming regions in the Milky Way. We observed Trumpler 14/Carina I in the 158 $μ$m transition of [C\,{\sc ii}] with a spatial resolution of 48$''$ and a…
▽ More
We present observations of the Trumpler 14/Carina I region carried out using the Stratospheric Terahertz Observatory 2 (STO2). The Trumpler 14/Carina I region is in the west part of the Carina Nebula Complex, which is one of the most extreme star-forming regions in the Milky Way. We observed Trumpler 14/Carina I in the 158 $μ$m transition of [C\,{\sc ii}] with a spatial resolution of 48$''$ and a velocity resolution of 0.17 km s$^{-1}$. The observations cover a 0.25$^\circ$ by 0.28$^\circ$ area with central position {\it l} = 297.34$^\circ$, {\it b} = -0.60$^\circ$. The kinematics show that bright [C\,{\sc ii}] structures are spatially and spectrally correlated with the surfaces of CO clouds, tracing the photodissociation region and ionization front of each molecular cloud. Along 7 lines of sight that traverse Tr 14 into the dark ridge to the southwest, we find that the [C\,{\sc ii}] luminosity from the HII region is 3.7 times that from the PDR. In same los we find in the PDRs an average ratio of 1:4.1:5.6 for the mass in atomic gas:dark-CO gas: molecular gas traced by CO. Comparing multiple gas tracers including HI 21cm, [C\,{\sc ii}], CO, and radio recombination lines, we find that the HII regions of the Carina Nebula Complex are well-described as HII regions with one-side freely expanding towards us, consistent with the champagne model of ionized gas evolution. The dispersal of the GMC in this region is dominated by EUV photoevaporation; the dispersal timescale is 20-30 Myr.
△ Less
Submitted 22 May, 2019; v1 submitted 22 March, 2019;
originally announced March 2019.
-
Skynet Algorithm for Single-Dish Radio Map** I: Contaminant-Cleaning, Map**, and Photometering Small-Scale Structures
Authors:
J. R. Martin,
D. E. Reichart,
D. A. Dutton,
M. P. Maples,
T. A. Berger,
F. D. Ghigo,
J. B. Haislip,
O. H. Shaban,
A. S. Trotter,
L. M. Barnes,
M. L. Paggen,
R. L. Gao,
C. P. Salemi,
G. I. Langston,
S. Bussa,
J. A. Duncan,
S. White,
S. A. Heatherly,
J. B. Karlik,
E. M. Johnson,
J. E. Reichart,
A. C. Foster,
V. V. Kouprianov,
S. Mazlin,
J. Harvey
Abstract:
We present a single-dish map** algorithm with a number of advantages over traditional techniques. (1) Our algorithm makes use of weighted modeling, instead of weighted averaging, to interpolate between signal measurements. This smooths the data, but without blurring the data beyond instrumental resolution. Techniques that rely on weighted averaging blur point sources sometimes as much as 40%. (2…
▽ More
We present a single-dish map** algorithm with a number of advantages over traditional techniques. (1) Our algorithm makes use of weighted modeling, instead of weighted averaging, to interpolate between signal measurements. This smooths the data, but without blurring the data beyond instrumental resolution. Techniques that rely on weighted averaging blur point sources sometimes as much as 40%. (2) Our algorithm makes use of local, instead of global, modeling to separate astronomical signal from instrumental and/or environmental signal drift along the telescope's scans. Other techniques, such as basket weaving, model this drift with simple functional forms (linear, quadratic, etc.) across the entirety of scans, limiting their ability to remove such contaminants. (3) Our algorithm makes use of a similar, local modeling technique to separate astronomical signal from radio-frequency interference (RFI), even if only continuum data are available. (4) Unlike other techniques, our algorithm does not require data to be collected on a rectangular grid or regridded before processing. (5) Data from any number of observations, overlap** or not, may be appended and processed together. (6) Any pixel density may be selected for the final image. We present our algorithm, and evaluate it using both simulated and real data. We are integrating it into the image-processing library of the Skynet Robotic Telescope Network, which includes optical telescopes spanning four continents, and now also Green Bank Observatory's 20-meter diameter radio telescope in West Virginia. Skynet serves hundreds of professional users, and additionally tens of thousands of students, of all ages. Default data products are generated on the fly, but will soon be customizable after the fact.
△ Less
Submitted 18 August, 2018;
originally announced August 2018.
-
SPICA - a large cryogenic infrared space telescope Unveiling the obscured Universe
Authors:
P. R. Roelfsema,
H. Shibai,
L. Armus,
D. Arrazola,
M. Audard,
M. D. Audley,
C. M. Bradford,
I. Charles,
P. Dieleman,
Y. Doi,
L. Duband,
M. Eggens,
J. Evers,
I. Funaki,
J. R. Gao,
M. Giard,
A. di Giorgio L. M. González Fernández,
M. Griffin,
F. P. Helmich,
R. Hijmering,
R. Huisman,
D. Ishihara,
N. Isobe,
B. Jackson,
H. Jacobs
, et al. (44 additional authors not shown)
Abstract:
Measurements in the infrared wavelength domain allow us to assess directly the physical state and energy balance of cool matter in space, thus enabling the detailed study of the various processes that govern the formation and early evolution of stars and planetary systems in galaxies over cosmic time. Previous infrared missions, from IRAS to Herschel, have revealed a great deal about the obscured…
▽ More
Measurements in the infrared wavelength domain allow us to assess directly the physical state and energy balance of cool matter in space, thus enabling the detailed study of the various processes that govern the formation and early evolution of stars and planetary systems in galaxies over cosmic time. Previous infrared missions, from IRAS to Herschel, have revealed a great deal about the obscured Universe, but sensitivity has been limited because up to now it has not been possible to fly a telescope that is both large and cold.
SPICA is a mission concept aimed at taking the next step in mid- and far-infrared observational capability by combining a large and cold telescope with instruments employing state-of-the-art ultra-sensitive detectors. The mission concept foresees a 2.5-meter diameter telescope cooled to below 8 K. With cooling provided by mechanical coolers instead of depending on a limited cryogen supply, the mission lifetime can extend significantly beyond the required three years.
SPICA offers instrumentation with spectral resolving powers ranging from R ~50 through 11000 in the 17-230 $μ$m domain as well as R~28.000 spectroscopy between 12 and 18 $μ$m. Additionally SPICA will provide efficient 30-37 $μ$m broad band map**, and polarimetric imaging in the 100-350 $μ$m range. SPICA will provide unprecedented spectroscopic sensitivity of ~5 x $10^{-20}$ W/m$^2$ (5$σ$/1hr) - at least two orders of magnitude improvement over what has been attained to date.
With this exceptional leap in performance, new domains in infrared astronomy will become accessible, allowing us, for example, to unravel definitively galaxy evolution and metal production over cosmic time, to study dust formation and evolution from very early epochs onwards, and to trace the formation history of planetary systems.
△ Less
Submitted 28 March, 2018;
originally announced March 2018.
-
The binarity of Galactic dwarf stars along with effective temperature and metallicity
Authors:
Shuang Gao,
He Zhao,
Hang Yang,
Ran Gao
Abstract:
The fraction of binary stars (fb) is one of most valuable tool to probe the star formation and evolution of multiple systems in the Galaxy. We focus on the relationship between fb and stellar metallicity ([Fe/H]) by employing the differential radial velocity (DRV) method and the large sample observed by the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST). Main-sequence stars fro…
▽ More
The fraction of binary stars (fb) is one of most valuable tool to probe the star formation and evolution of multiple systems in the Galaxy. We focus on the relationship between fb and stellar metallicity ([Fe/H]) by employing the differential radial velocity (DRV) method and the large sample observed by the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST). Main-sequence stars from A- to K-types in the third data release (DR3) of LAMOST are selected to estimate fb. Contributions to a profile of DRV from radial velocity (RV) error of single stars (σ) and orbital motion of binary stars are evaluated from the profile of DRV. Finally, we employ 365,911 stars with randomly repeating spectral observations to present a detailed analysis of fb and σin the two-dimensional (2D) space of Teff and [Fe/H]. The A-type stars are more likely to be companions in binary star systems than other stars. Furthermore, the reverse correlation between fb and [Fe/H] can be shown statistically, which suggests that fb is a joint function of Teff and [Fe/H]. At the same time, σof the sample for different Teff and [Fe/H] are fitted. Metal-rich cold stars in our sample have the best RV measurement.
△ Less
Submitted 31 March, 2017; v1 submitted 29 March, 2017;
originally announced March 2017.
-
A multiplexer for the ac/dc characterization of TES based bolometers and microcalorimeters
Authors:
Luciano Gottardi,
Hiroki Akamatsu,
Marcel Bruijn,
Jan R. Gao,
Roland den Hartog,
Richard Hijmering,
Henk Hoevers,
Pourya Khosropanah,
Jan van der Kuur,
Anoton van der Linden,
Marcel Lindeman,
Marcel Ridder
Abstract:
At SRON we are develo** the Frequency Domain Multiplexing (FDM) for the read-out of the TES-based detector array for the future infrared and X-ray space mission. We describe the performances of a multiplexer designed to increase the experimental throughput in the characterisation of ultra-low noise equivalent power (NEP) TES bolometers and high energy resolving power X-ray microcalorimeters arra…
▽ More
At SRON we are develo** the Frequency Domain Multiplexing (FDM) for the read-out of the TES-based detector array for the future infrared and X-ray space mission. We describe the performances of a multiplexer designed to increase the experimental throughput in the characterisation of ultra-low noise equivalent power (NEP) TES bolometers and high energy resolving power X-ray microcalorimeters arrays under ac and dc bias. We discuss the results obtained using the TiAu TES bolometers array fabricated at SRON with measured dark NEP below $5\cdot 10^{-19}W/Hz^{1/2}$ and saturation power of several fW
△ Less
Submitted 9 April, 2016;
originally announced April 2016.
