Showing 1–50 of 60 results for author: Fixsen, D J

Characterization of Low-noise Backshort-Under-Grid Kilopixel Transition Edge Sensor Arrays for PIPER

Authors: Rahul Datta, Sumit Dahal, Eric R. Switzer, Regis P. Brekosky, Thomas Essinger-Hileman, Dale J. Fixsen, Christine A. Jhabvala, Alan J. Kogut, Timothy M. Miller, Paul Mirel, Edward J. Wollack

Abstract: We present laboratory characterization of kilo-pixel, filled backshort-under-grid (BUG) transition-edge sensor (TES) arrays developed for the Primordial Inflation Polarization ExploreR (PIPER) balloon-borne instrument. PIPER is designed to map the polarization of the CMB on the largest angular scales and characterize dust foregrounds by observing a large fraction of the sky in four frequency bands… ▽ More We present laboratory characterization of kilo-pixel, filled backshort-under-grid (BUG) transition-edge sensor (TES) arrays developed for the Primordial Inflation Polarization ExploreR (PIPER) balloon-borne instrument. PIPER is designed to map the polarization of the CMB on the largest angular scales and characterize dust foregrounds by observing a large fraction of the sky in four frequency bands in the range 200 to 600 GHz. The BUG TES arrays are read out by planar SQUID-based time division multiplexer chips (2dMUX) of matching form factor and hybridized directly with the detector arrays through indium bump bonding. Here, we discuss the performance of the 2dMUX and present measurements of the TES transition temperature, thermal conductance, saturation power, and preliminary noise performance. The detectors achieve saturation power below 1 pW and phonon noise equivalent power (NEP) on the order of a few aW/rtHz. Detector performance is further verified through pre-flight tests in the integrated PIPER receiver, performed in an environment simulating balloon float conditions. △ Less

Submitted 2 December, 2022; originally announced December 2022.

Comments: 11 pages, 11 figures

Calibration Method and Uncertainty for the Primordial Inflation Explorer (PIXIE)

Authors: A. Kogut, D. J. Fixsen

Abstract: The Primordial Inflation Explorer (PIXIE) is an Explorer-class mission concept to measure cosmological signals from both linear polarization of the cosmic microwave background and spectral distortions from a perfect blackbody. The targeted measurement sensitivity is 2--4 orders of magnitude below competing astrophysical foregrounds, placing stringent requirements on instrument calibration. An on-b… ▽ More The Primordial Inflation Explorer (PIXIE) is an Explorer-class mission concept to measure cosmological signals from both linear polarization of the cosmic microwave background and spectral distortions from a perfect blackbody. The targeted measurement sensitivity is 2--4 orders of magnitude below competing astrophysical foregrounds, placing stringent requirements on instrument calibration. An on-board blackbody calibrator presents a polarizing Fourier transform spectrometer with a known signal to enable conversion of the sampled interference fringe patterns from telemetry units to physical units. We describe the instrumentation and operations needed to calibrate PIXIE, derive the expected uncertainty for the intensity, polarization, and frequency scales, and show the effect of calibration uncertainty in the derived cosmological signals. In-flight calibration is expected to be accurate to a few parts in $10^6$ at frequencies dominated by the CMB, and a few parts in $10^4$ at higher frequencies dominated by the diffuse dust foreground. △ Less

Submitted 4 March, 2021; v1 submitted 3 February, 2020; originally announced February 2020.

Comments: 18 pages including 8 figures. Added material on frequency calibration, matches final published version

Sub-Kelvin cooling for two kilopixel bolometer arrays in the PIPER receiver

Authors: E. R. Switzer, P. A. R. Ade, T. Baildon, D. Benford, C. L. Bennett, D. T. Chuss, R. Datta, J. R. Eimer, D. J. Fixsen, N. N. Gandilo, T. M. Essinger-Hileman, M. Halpern, G. Hilton, K. Irwin, C. Jhabvala, M. Kimball, A. Kogut, J. Lazear, L. N. Lowe, J. J. McMahon, T. M. Miller, P. Mirel, S. H. Moseley, S. Pawlyk, S. Rodriguez , et al. (8 additional authors not shown)

Abstract: The Primordial Inflation Polarization Explorer (PIPER) is a balloon-borne telescope mission to search for inflationary gravitational waves from the early universe. PIPER employs two 32x40 arrays of superconducting transition-edge sensors, which operate at 100 mK. An open bucket dewar of liquid helium maintains the receiver and telescope optics at 1.7 K. We describe the thermal design of the receiv… ▽ More The Primordial Inflation Polarization Explorer (PIPER) is a balloon-borne telescope mission to search for inflationary gravitational waves from the early universe. PIPER employs two 32x40 arrays of superconducting transition-edge sensors, which operate at 100 mK. An open bucket dewar of liquid helium maintains the receiver and telescope optics at 1.7 K. We describe the thermal design of the receiver and sub-kelvin cooling with a continuous adiabatic demagnetization refrigerator (CADR). The CADR operates between 70-130 mK and provides ~10 uW cooling power at 100 mK, nearly five times the loading of the two detector assemblies. We describe electronics and software to robustly control the CADR, overall CADR performance in flight-like integrated receiver testing, and practical considerations for implementation in the balloon float environment. △ Less

Submitted 13 September, 2019; originally announced September 2019.

Comments: 14 pages, 12 figures

Journal ref: Rev. Sci. Inst 90(9) 2019

Systematic error cancellation for a four-port interferometric polarimeter

Authors: A. Kogut, D. J. Fixsen

Abstract: The Primordial Inflation Explorer (PIXIE) is an Explorer-class mission concept to measure the gravitational-wave signature of primordial inflation through its distinctive imprint on the linear polarization of the cosmic microwave background (CMB). Its optical system couples a polarizing Fourier transform spectrometer to the sky to measure the differential signal between orthogonal linear polarizat… ▽ More The Primordial Inflation Explorer (PIXIE) is an Explorer-class mission concept to measure the gravitational-wave signature of primordial inflation through its distinctive imprint on the linear polarization of the cosmic microwave background (CMB). Its optical system couples a polarizing Fourier transform spectrometer to the sky to measure the differential signal between orthogonal linear polarization states from two co-pointed beams on the sky. The double differential nature of the four-port measurement mitigates beam-related systematic errors common to the two-port systems used in most CMB measurements. Systematic errors coupling unpolarized temperature gradients to a false polarized signal cancel to first order for any individual detector. This common-mode cancellation is performed optically, prior to detection, and does not depend on the instrument calibration. Systematic errors coupling temperature to polarization cancel to second order when comparing signals from independent detectors. We describe the polarized beam patterns for PIXIE and assess the systematic error for measurements of CMB polarization. △ Less

Submitted 1 August, 2019; originally announced August 2019.

Comments: 18 pages including 10 figurers Published in the Journal of Astronomical Telescopes, Instruments, and Systems

A Compact Millimeter-Wavelength Fourier-Transform Spectrometer

Authors: Zhaodi Pan, Mira Liu, Ritoban Basu Thakur, Bradford A. Benson, Dale J. Fixsen, Hazal Goksu, Eleanor Rath, Stephan S. Meyer

Abstract: We have constructed a Fourier-transform spectrometer (FTS) operating between 50 and 330 GHz with minimum volume (355 x260 x64 mm) and weight (13 lbs) while maximizing optical throughput (100 $\mathrm{mm}^2$ sr) and optimizing the spectral resolution (4 GHz). This FTS is designed as a polarizing Martin-Puplett interferometer with unobstructed input and output in which both input polarizations under… ▽ More We have constructed a Fourier-transform spectrometer (FTS) operating between 50 and 330 GHz with minimum volume (355 x260 x64 mm) and weight (13 lbs) while maximizing optical throughput (100 $\mathrm{mm}^2$ sr) and optimizing the spectral resolution (4 GHz). This FTS is designed as a polarizing Martin-Puplett interferometer with unobstructed input and output in which both input polarizations undergo interference. The instrument construction is simple with mirrors milled on the box walls and one motorized stage as the single moving element. We characterize the performance of the FTS, compare the measurements to an optical simulation, and discuss features that relate to details of the FTS design. The simulation is also used to determine the tolerance of optical alignments for the required specifications. We detail the FTS mechanical design and provide the control software as well as the analysis code online. △ Less

Submitted 17 May, 2019; originally announced May 2019.

Comments: Submitted to Applied Optics. [Copyright 2019 Optical Society of America]. Users may use, reuse, and build upon the article, or use the article for text or data mining, so long as such uses are for non-commercial purposes and appropriate attribution is maintained. All other rights are reserved

Determination of the Cosmic Infrared Background from COBE/FIRAS and Planck HFI Observations

Authors: N. Odegard, J. L. Weiland, D. J. Fixsen, D. T. Chuss, E. Dwek, A. Kogut, E. R. Switzer

Abstract: New determinations are presented of the cosmic infrared background monopole brightness in the Planck HFI bands from 100 GHz to 857 GHz. Planck was not designed to measure the monopole component of sky brightness, so cross-correlation of the 2015 HFI maps with COBE/FIRAS data is used to recalibrate the zero level of the HFI maps. For the HFI 545 and 857 GHz maps, the brightness scale is also recali… ▽ More New determinations are presented of the cosmic infrared background monopole brightness in the Planck HFI bands from 100 GHz to 857 GHz. Planck was not designed to measure the monopole component of sky brightness, so cross-correlation of the 2015 HFI maps with COBE/FIRAS data is used to recalibrate the zero level of the HFI maps. For the HFI 545 and 857 GHz maps, the brightness scale is also recalibrated. Correlation of the recalibrated HFI maps with a linear combination of Galactic H I and H alpha data is used to separate the Galactic foreground emission and determine the cosmic infrared background brightness in each of the HFI bands. We obtain CIB values of 0.007 +- 0.014, 0.010 +- 0.019, 0.060 +- 0.023, 0.149 +- 0.017, 0.371 +- 0.018, and 0.576 +- 0.034 MJy/sr at 100, 143, 217, 353, 545, and 857 GHz, respectively. The estimated uncertainties for the 353 to 857 GHz bands are about 3 to 6 times smaller than those of previous direct CIB determinations at these frequencies. Our results are compared with integrated source brightness results from selected recent submillimeter and millimeter wavelength imaging surveys. △ Less

Submitted 23 May, 2019; v1 submitted 25 April, 2019; originally announced April 2019.

Comments: 29 pages, 18 figures, accepted for publication in ApJ; minor changes in v2 to match published version

Journal ref: Ap.J. 877, 40 (2019)

Principal Component Analysis of Up-the-ramp Sampled IR Array Data

Authors: Bernard J. Rauscher, Richard G. Arendt, D. J. Fixsen, Alexander Kutyrev, Gregory Mosby, S. H. Moseley

Abstract: We describe the results of principal component analysis (PCA) of up-the-ramp sampled IR array data from the HST WFC3 IR, JWST NIRSpec, and prototype WFIRST WFI detectors. These systems use respectively Teledyne H1R, H2RG, and H4RG-10 near-IR detector arrays with a variety of IR array controllers. The PCA shows that the Legendre polynomials approximate the principal components of these systems (i.e… ▽ More We describe the results of principal component analysis (PCA) of up-the-ramp sampled IR array data from the HST WFC3 IR, JWST NIRSpec, and prototype WFIRST WFI detectors. These systems use respectively Teledyne H1R, H2RG, and H4RG-10 near-IR detector arrays with a variety of IR array controllers. The PCA shows that the Legendre polynomials approximate the principal components of these systems (i.e. they roughly diagonalize the covariance matrix). In contrast to the monomial basis that is widely used for polynomial fitting and linearization today, the Legendre polynomials are an orthonormal basis. They provide a quantifiable, compact, and (nearly) linearly uncorrelated representation of the information content of the data. By fitting a few Legendre polynomials, nearly all of the meaningful information in representative WFC3 astronomical datacubes can be condensed from 15 up-the-ramp samples down to 6 compressible Legendre coefficients per pixel. The higher order coefficients contain time domain information that is lost when one projects up-the-ramp sampled datacubes onto 2-dimensional images by fitting a straight line, even if the data are linearized before fitting the line. Going forward, we believe that this time domain information is potentially important for disentangling the various non-linearities that can affect IR array observations, i.e. inherent pixel non-linearity, persistence, burn in, brighter-fatter effect, (potentially) non-linear inter-pixel capacitance (IPC), and perhaps others. △ Less

Submitted 6 February, 2019; originally announced February 2019.

Comments: 26 pages, 10 figures, accepted by Journal of Astronomical Telescopes, Instruments, and Systems (JATIS)

Journal ref: J. of Astronomical Telescopes, Instruments, and Systems, 5(2), 028001 (2019)

Polarized Beam Patterns from a Multi-Moded Feed For Observations of the Cosmic Microwave Background

Authors: A. Kogut, D. J. Fixsen

Abstract: We measure linearly polarized beam patterns for a multi-moded concentrator and compare the results to a simple model based on geometric optics. We convolve the measured co-polar and cross-polar beams with simulated maps of CMB polarization to estimate the amplitude of the systematic error resulting from the cross-polar beam response. The un-corrected error signal has typical amplitude of 3 nK, cor… ▽ More We measure linearly polarized beam patterns for a multi-moded concentrator and compare the results to a simple model based on geometric optics. We convolve the measured co-polar and cross-polar beams with simulated maps of CMB polarization to estimate the amplitude of the systematic error resulting from the cross-polar beam response. The un-corrected error signal has typical amplitude of 3 nK, corresponding to inflationary B-mode amplitude r ~ 10^{-3}. Convolving the measured cross-polar beam pattern with maps of the CMB E-mode polarization provides a template for correcting the cross-polar response, reducing it to negligible levels. △ Less

Submitted 26 January, 2018; originally announced January 2018.

Comments: 16 pages including 8 figurers. Accepted for publication in the Journal of Astronomical Telescopes, Instruments, and Systems

Improved Reference Sampling and Subtraction: A Technique for Reducing the Read Noise of Near-infrared Detector Systems

Authors: Bernard J. Rauscher, Richard G. Arendt, D. J. Fixsen, Matthew A. Greenhouse, Matthew Lander, Don Lindler, Markus Loose, S. H. Moseley, D. Brent Mott, Yiting Went, Donna V. Wilson, Christos Xenophontos

Abstract: Near-infrared array detectors, like the \JWST NIRSpec's Teledyne's H2RGs, often provide reference pixels and a reference output. These are used to remove correlated noise. Improved Reference Sampling and Subtraction (\IRSSquare, pronounced "IRS-square") is a statistical technique for using this reference information optimally in a least squares sense. Compared to "traditional" H2RG readout, \IRSSq… ▽ More Near-infrared array detectors, like the \JWST NIRSpec's Teledyne's H2RGs, often provide reference pixels and a reference output. These are used to remove correlated noise. Improved Reference Sampling and Subtraction (\IRSSquare, pronounced "IRS-square") is a statistical technique for using this reference information optimally in a least squares sense. Compared to "traditional" H2RG readout, \IRSSquare uses a different clocking pattern to interleave many more reference pixels into the data than is otherwise possible. Compared to standard reference correction techniques, \IRSSquare subtracts the reference pixels and reference output using a statistically optimized set of frequency dependent weights. The benefits include somewhat lower noise variance and much less obvious correlated noise. NIRSpec's \IRSSquare images are cosmetically clean, with less $1/f$ banding than in traditional data from the same system. This article describes the \IRSSquare clocking pattern and presents the equations that are needed to use \IRSSquare in systems other than NIRSpec. For NIRSpec, applying these equations is already an option in the calibration pipeline. As an aid to instrument builders, we provide our prototype \IRSSquare calibration software and sample \JWST NIRSpec data. The same techniques are applicable to other detector systems, including those based on Teledyne's H4RG arrays. The H4RG's "interleaved reference pixel readout" mode is effectively one \IRSSquare pattern. △ Less

Submitted 28 July, 2017; originally announced July 2017.

Multimode bolometer development for the PIXIE instrument

Authors: Peter C. Nagler, Kevin T. Crowley, Kevin L. Denis, Archana M. Devasia, Dale J. Fixsen, Alan J. Kogut, George Manos, Scott Porter, Thomas R. Stevenson

Abstract: The Primordial Inflation Explorer (PIXIE) is an Explorer-class mission concept designed to measure the polarization and absolute intensity of the cosmic microwave background. In the following, we report on the design, fabrication, and performance of the multimode polarization-sensitive bolometers for PIXIE, which are based on silicon thermistors. In particular we focus on several recent advances i… ▽ More The Primordial Inflation Explorer (PIXIE) is an Explorer-class mission concept designed to measure the polarization and absolute intensity of the cosmic microwave background. In the following, we report on the design, fabrication, and performance of the multimode polarization-sensitive bolometers for PIXIE, which are based on silicon thermistors. In particular we focus on several recent advances in the detector design, including the implementation of a scheme to greatly raise the frequencies of the internal vibrational modes of the large-area, low-mass optical absorber structure consisting of a grid of micromachined, ion-implanted silicon wires. With $\sim30$ times the absorbing area of the spider-web bolometers used by Planck, the tensioning scheme enables the PIXIE bolometers to be robust in the vibrational and acoustic environment at launch of the space mission. More generally, it could be used to reduce microphonic sensitivity in other types of low temperature detectors. We also report on the performance of the PIXIE bolometers in a dark cryogenic environment. △ Less

Submitted 14 November, 2016; originally announced November 2016.

Comments: 10 pages, 7 figures

Journal ref: Proc. SPIE 9914, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VIII, 99141A (July 19, 2016)

The Primordial Inflation Polarization Explorer (PIPER)

Authors: Natalie N. Gandilo, Peter A. R. Ade, Dominic Benford, Charles L. Bennett, David T. Chuss, Jessie L. Dotson, Joseph R. Eimer, Dale J. Fixsen, Mark Halpern, Gene Hilton, Gary F. Hinshaw, Kent Irwin, Christine Jhabvala, Mark Kimball, Alan Kogut, Luke Lowe, Jeff J. McMahon, Timothy M. Miller, Paul Mirel, S. Harvey Moseley, Samuel Pawlyk, Samelys Rodriguez, Elmer Sharp III, Peter Shirron, Johannes G. Staguhn , et al. (5 additional authors not shown)

Abstract: The Primordial Inflation Polarization ExploreR (PIPER) is a balloon-borne telescope designed to measure the polarization of the Cosmic Microwave Background on large angular scales. PIPER will map 85% of the sky at 200, 270, 350, and 600 GHz over a series of 8 conventional balloon flights from the northern and southern hemispheres. The first science flight will use two 32x40 arrays of backshort-und… ▽ More The Primordial Inflation Polarization ExploreR (PIPER) is a balloon-borne telescope designed to measure the polarization of the Cosmic Microwave Background on large angular scales. PIPER will map 85% of the sky at 200, 270, 350, and 600 GHz over a series of 8 conventional balloon flights from the northern and southern hemispheres. The first science flight will use two 32x40 arrays of backshort-under-grid transition edge sensors, multiplexed in the time domain, and maintained at 100 mK by a Continuous Adiabatic Demagnetization Refrigerator. Front-end cryogenic Variable-delay Polarization Modulators provide systematic control by rotating linear to circular polarization at 3 Hz. Twin telescopes allow PIPER to measure Stokes I, Q, U, and V simultaneously. The telescope is maintained at 1.5 K in an LHe bucket dewar. Cold optics and the lack of a warm window permit sensitivity at the sky-background limit. The ultimate science target is a limit on the tensor-to-scalar ratio of r ~ 0.007, from the reionization bump to l ~ 300. PIPER's first flight will be from the Northern hemisphere, and overlap with the CLASS survey at lower frequencies. We describe the current status of the PIPER instrument. △ Less

Submitted 20 July, 2016; originally announced July 2016.

Comments: 8 pages, 6 figures. To be published in Proceedings of SPIE Volume 9914. Presented at SPIE Astronomical Telescopes + Instrumentation 2016, conference 9914

Foreground Bias From Parametric Models of Far-IR Dust Emission

Authors: A. Kogut, D. J. Fixsen

Abstract: We use simple toy models of far-IR dust emission to estimate the accuracy to which the polarization of the cosmic microwave background can be recovered using multi-frequency fits, if the parametric form chosen for the fitted dust model differs from the actual dust emission. Commonly used approximations to the far-IR dust spectrum yield CMB residuals comparable to or larger than the sensitivities e… ▽ More We use simple toy models of far-IR dust emission to estimate the accuracy to which the polarization of the cosmic microwave background can be recovered using multi-frequency fits, if the parametric form chosen for the fitted dust model differs from the actual dust emission. Commonly used approximations to the far-IR dust spectrum yield CMB residuals comparable to or larger than the sensitivities expected for the next generation of CMB missions, despite fitting the combined CMB + foreground emission to precision 0.1% or better. The Rayleigh-Jeans approximation to the dust spectrum biases the fitted dust spectral index by Delta beta_d = 0.2 and the inflationary B-mode amplitude by Delta r = 0.03. Fitting the dust to a modified blackbody at a single temperature biases the best-fit CMB by Delta r > 0.003 if the true dust spectrum contains multiple temperature components. A 13-parameter model fitting two temperature components reduces this bias by an order of magnitude if the true dust spectrum is in fact a simple superposition of emission at different temperatures, but fails at the level Delta r = 0.006 for dust whose spectral index varies with frequency. Restricting the observing frequencies to a narrow region near the foreground minimum reduces these biases for some dust spectra but can increase the bias for others. Data at THz frequencies surrounding the peak of the dust emission can mitigate these biases while providing a direct determination of the dust temperature profile. △ Less

Submitted 7 July, 2016; originally announced July 2016.

Comments: 9 pages including 8 figures. Accepted for publication in The Astrophysical Journal

Systematic effects in polarizing Fourier transform spectrometers for cosmic microwave background observations

Authors: Peter C. Nagler, Dale J. Fixsen, Alan Kogut, Gregory S. Tucker

Abstract: The detection of the primordial B-mode polarization signal of the cosmic microwave background (CMB) would provide evidence for inflation. Yet as has become increasingly clear, the detection of a such a faint signal requires an instrument with both wide frequency coverage to reject foregrounds and excellent control over instrumental systematic effects. Using a polarizing Fourier transform spectrome… ▽ More The detection of the primordial B-mode polarization signal of the cosmic microwave background (CMB) would provide evidence for inflation. Yet as has become increasingly clear, the detection of a such a faint signal requires an instrument with both wide frequency coverage to reject foregrounds and excellent control over instrumental systematic effects. Using a polarizing Fourier transform spectrometer (FTS) for CMB observations meets both these requirements. In this work, we present an analysis of instrumental systematic effects in polarizing Fourier transform spectrometers, using the Primordial Inflation Explorer (PIXIE) as a worked example. We analytically solve for the most important systematic effects inherent to the FTS - emissive optical components, misaligned optical components, sampling and phase errors, and spin synchronous effects - and demonstrate that residual systematic error terms after corrections will all be at the sub-nK level, well below the predicted 100 nK B-mode signal. △ Less

Submitted 27 October, 2015; originally announced October 2015.

Comments: 19 pages, 11 figures. Accepted for publication in ApJS

Journal ref: 2015 ApJS, 221, 21

Recovery of Large Angular Scale CMB Polarization for Instruments Employing Variable-delay Polarization Modulators

Authors: N. J. Miller, D. T. Chuss, T. A. Marriage, E. J. Wollack, J. W. Appel, C. L. Bennett, J. Eimer, T. Essinger-Hileman, D. J. Fixsen, K. Harrington, S. H. Moseley, K. Rostem, E. R. Switzer, D. J. Watts

Abstract: Variable-delay Polarization Modulators (VPMs) are currently being implemented in experiments designed to measure the polarization of the cosmic microwave background on large angular scales because of their capability for providing rapid, front-end polarization modulation and control over systematic errors. Despite the advantages provided by the VPM, it is important to identify and mitigate any tim… ▽ More Variable-delay Polarization Modulators (VPMs) are currently being implemented in experiments designed to measure the polarization of the cosmic microwave background on large angular scales because of their capability for providing rapid, front-end polarization modulation and control over systematic errors. Despite the advantages provided by the VPM, it is important to identify and mitigate any time-varying effects that leak into the synchronously modulated component of the signal. In this paper, the effect of emission from a $300$ K VPM on the system performance is considered and addressed. Though instrument design can greatly reduce the influence of modulated VPM emission, some residual modulated signal is expected. VPM emission is treated in the presence of rotational misalignments and temperature variation. Simulations of time-ordered data are used to evaluate the effect of these residual errors on the power spectrum. The analysis and modeling in this paper guides experimentalists on the critical aspects of observations using VPMs as front-end modulators. By implementing the characterizations and controls as described, front-end VPM modulation can be very powerful for mitigating $1/f$ noise in large angular scale polarimetric surveys. None of the systematic errors studied fundamentally limit the detection and characterization of B-modes on large scales for a tensor-to-scalar ratio of $r=0.01$. Indeed, $r<0.01$ is achievable with commensurately improved characterizations and controls. △ Less

Submitted 19 February, 2016; v1 submitted 14 September, 2015; originally announced September 2015.

Comments: 13 pages, 13 figures, 1 table, matches published version

Journal ref: ApJ, 818, 151 (2016)

Far-Infrared double-Fourier interferometers and their spectral sensitivity

Authors: Maxime J. Rizzo, Lee G. Mundy, Stephen A. Rinehart, Arnab Dhabal, Dale J. Fixsen, Roser Juanola-Parramon, Dominic J. Benford, David T. Leisawitz, Robert F. Silverberg, Todd J. Veach

Abstract: Double-Fourier interferometry is the most viable path to sub-arcsecond spatial resolution for future astronomical instruments that will observe the universe at far-infrared wavelengths. The double transform spatio-spectral interferometry couples pupil plane beam combination with detector arrays to enable imaging spectroscopy of wide fields, that will be key to accomplishing top-level science goals… ▽ More Double-Fourier interferometry is the most viable path to sub-arcsecond spatial resolution for future astronomical instruments that will observe the universe at far-infrared wavelengths. The double transform spatio-spectral interferometry couples pupil plane beam combination with detector arrays to enable imaging spectroscopy of wide fields, that will be key to accomplishing top-level science goals. The wide field of view and the necessity for these instruments to fly above the opaque atmosphere create unique characteristics and requirements compared to instruments on ground-based telescopes. In this paper, we discuss some characteristics of single-baseline spatio-spectral interferometers. We investigate the impact of intensity and optical path difference noise on the interferogram and the spectral signal-to-noise ratio. We apply our findings to the special case of the Balloon Experimental Twin Telescope for Infrared Interferometry (BETTII), a balloon payload that will be a first application of this technique at far-infrared wavelengths on a flying platform. △ Less

Submitted 14 July, 2015; originally announced July 2015.

Polarization Properties of A Multi-Moded Concentrator

Authors: A. Kogut, D. J. Fixsen, R. S. Hill

Abstract: We present the design and performance of a non-imaging concentrator for use in broad-band polarimetry at millimeter through submillimeter wavelengths. A rectangular geometry preserves the input polarization state as the concentrator couples f/2 incident optics to a 2 pi sr detector. Measurements of the co-polar and cross-polar beams in both the few-mode and highly over-moded limits agree with a si… ▽ More We present the design and performance of a non-imaging concentrator for use in broad-band polarimetry at millimeter through submillimeter wavelengths. A rectangular geometry preserves the input polarization state as the concentrator couples f/2 incident optics to a 2 pi sr detector. Measurements of the co-polar and cross-polar beams in both the few-mode and highly over-moded limits agree with a simple model based on mode truncation. The measured co-polar beam pattern is nearly independent of frequency in both linear polarizations. The cross-polar beam pattern is dominated by a uniform term corresponding to polarization efficiency 94%. After correcting for efficiency, the remaining cross-polar response is -18 dB. △ Less

Submitted 13 March, 2015; originally announced March 2015.

Comments: 9 pages including 8 figures. Accepted for publication in the Journal of the Optical Society of America A

Probing the Dark Flow signal in WMAP 9 yr and PLANCK cosmic microwave background maps

Authors: Fernando Atrio-Barandela, Alexander Kashlinsky, Harald Ebeling, Dale J. Fixsen, Dale Kocevski

Abstract: The "dark flow" dipole is a statistically significant dipole found at the position of galaxy clusters in filtered maps of Cosmic Microwave Background (CMB) temperature anisotropies. The dipole measured in WMAP 3, 5 and 7 yr data releases was 1) mutually consistent, 2) roughly aligned with the all-sky CMB dipole and 3) correlated with clusters' X-ray luminosity. We analyzed WMAP 9 yr and the 1st yr… ▽ More The "dark flow" dipole is a statistically significant dipole found at the position of galaxy clusters in filtered maps of Cosmic Microwave Background (CMB) temperature anisotropies. The dipole measured in WMAP 3, 5 and 7 yr data releases was 1) mutually consistent, 2) roughly aligned with the all-sky CMB dipole and 3) correlated with clusters' X-ray luminosity. We analyzed WMAP 9 yr and the 1st yr Planck data releases using a catalog of 980 clusters outside the Kp0 mask to test our earlier findings. The dipoles measured on these new data sets are fully compatible with our earlier estimates, being similar in amplitude and direction to our previous results and in disagreement with the results of an earlier study by the Planck Collaboration. Further, in Planck datasets dipoles are found independent of frequency, ruling out the Thermal Sunyaev-Zeldovich as the source of the effect. Both, in WMAP and Planck, we find a clear correlation between the dipole measured at the cluster location in filtered maps with the average anisotropy on the original maps, further proving that the dipole is associated with clusters. The dipole signal is dominated by the most massive clusters, with a statistical significance better than 99\%, slightly larger than in WMAP. Since both data sets differ in foreground contributions, instrumental noise and other systematics, the agreement between WMAP and Planck dipoles argues against them being due to systematic effects in either of the experiments. △ Less

Submitted 22 July, 2015; v1 submitted 15 November, 2014; originally announced November 2014.

Comments: ApJ, in press

The Primordial Inflation Polarization Explorer (PIPER)

Authors: Justin Lazear, Peter A. R. Ade, Dominic Benford, Charles L. Bennett, David T. Chuss, Jessie L. Dotson, Joseph R. Eimer, Dale J. Fixsen, Mark Halpern, Gene Hilton, James Hinderks, Gary F. Hinshaw, Kent Irwin, Christine Jhabvala, Bradley Johnson, Alan Kogut, Luke Lowe, Jeff J. McMahon, Timothy M. Miller, Paul Mirel, S. Harvey Moseley, Samelys Rodriguez, Elmer Sharp, Johannes G. Staguhn, Eric R. Switzer , et al. (3 additional authors not shown)

Abstract: The Primordial Inflation Polarization Explorer (PIPER) is a balloon-borne cosmic microwave background (CMB) polarimeter designed to search for evidence of inflation by measuring the large-angular scale CMB polarization signal. BICEP2 recently reported a detection of B-mode power corresponding to the tensor-to-scalar ratio r = 0.2 on ~2 degree scales. If the BICEP2 signal is caused by inflationary… ▽ More The Primordial Inflation Polarization Explorer (PIPER) is a balloon-borne cosmic microwave background (CMB) polarimeter designed to search for evidence of inflation by measuring the large-angular scale CMB polarization signal. BICEP2 recently reported a detection of B-mode power corresponding to the tensor-to-scalar ratio r = 0.2 on ~2 degree scales. If the BICEP2 signal is caused by inflationary gravitational waves (IGWs), then there should be a corresponding increase in B-mode power on angular scales larger than 18 degrees. PIPER is currently the only suborbital instrument capable of fully testing and extending the BICEP2 results by measuring the B-mode power spectrum on angular scales $θ$ = ~0.6 deg to 90 deg, covering both the reionization bump and recombination peak, with sensitivity to measure the tensor-to-scalar ratio down to r = 0.007, and four frequency bands to distinguish foregrounds. PIPER will accomplish this by map** 85% of the sky in four frequency bands (200, 270, 350, 600 GHz) over a series of 8 conventional balloon flights from the northern and southern hemispheres. The instrument has background-limited sensitivity provided by fully cryogenic (1.5 K) optics focusing the sky signal onto four 32x40-pixel arrays of time-domain multiplexed Transition-Edge Sensor (TES) bolometers held at 140 mK. Polarization sensitivity and systematic control are provided by front-end Variable-delay Polarization Modulators (VPMs), which rapidly modulate only the polarized sky signal at 3 Hz and allow PIPER to instantaneously measure the full Stokes vector (I, Q, U, V) for each pointing. We describe the PIPER instrument and progress towards its first flight. △ Less

Submitted 9 July, 2014; originally announced July 2014.

Comments: 11 pages, 7 figures. To be published in Proceedings of SPIE Volume 9153. Presented at SPIE Astronomical Telescopes + Instrumentation 2014, conference 9153

Variable-delay Polarization Modulators for Cryogenic Millimeter-wave Applications

Authors: David T. Chuss, Joseph R. Eimer, Dale J. Fixsen, James Hinderks, Alan J. Kogut, Justin Lazear, Paul Mirel, Eric Switzer, George M. Voellmer, Edward J. Wollack

Abstract: We describe the design, construction, and initial validation of the variable-delay polarization modulator (VPM) designed for the PIPER cosmic microwave background polarimeter. The VPM modulates between linear and circular polarization by introducing a variable phase delay between orthogonal linear polarizations. Each VPM has a diameter of 39 cm and is engineered to operate in a cryogenic environme… ▽ More We describe the design, construction, and initial validation of the variable-delay polarization modulator (VPM) designed for the PIPER cosmic microwave background polarimeter. The VPM modulates between linear and circular polarization by introducing a variable phase delay between orthogonal linear polarizations. Each VPM has a diameter of 39 cm and is engineered to operate in a cryogenic environment (1.5 K). We describe the mechanical design and performance of the kinematic double-blade flexure and drive mechanism along with the construction of the high precision wire grid polarizers. △ Less

Submitted 28 May, 2014; v1 submitted 6 March, 2014; originally announced March 2014.

Comments: 8 pages, 10 Figures, Submitted to Review of Scientific Instruments

The GISMO 2-millimeter Deep Field in GOODS-N

Authors: Johannes G. Staguhn, Attila Kovacs, Richard G. Arendt, Dominic J. Benford, Roberto Decarli, Eli Dwek, Dale J. Fixsen, Gene C. Hilton, Kent D. Irwin, Christine A. Jhabvala, Alexander Karim, Samuel Leclercq, Stephen F. Maher, Timothy M. Miller, S. Harvey Moseley, Elmer H. Sharp, Fabian Walter, Edward J. Wollack

Abstract: We present deep continuum observations using the GISMO camera at a wavelength of 2 mm centered on the Hubble Deep Field (HDF) in the GOODS-N field. These are the first deep field observations ever obtained at this wavelength. The 1 sigma sensitivity in the innermost approx. 4 arcminutes of the 7 utes map is approx. 135 uJy/beam, a factor of three higher in flux/beam sensitivity than the deepest av… ▽ More We present deep continuum observations using the GISMO camera at a wavelength of 2 mm centered on the Hubble Deep Field (HDF) in the GOODS-N field. These are the first deep field observations ever obtained at this wavelength. The 1 sigma sensitivity in the innermost approx. 4 arcminutes of the 7 utes map is approx. 135 uJy/beam, a factor of three higher in flux/beam sensitivity than the deepest available SCUBA 850 um observations, and almost a factor of four higher in flux / beam sensitivity than the combined MAMBO/AzTEC 1.2 mm observations of this region. Our source extraction algorithm identifies 12 sources directly, and another 3 through correlation with known sources at 1.2 mm and 850 um. Five of the directly detected GISMO sources have counterparts in the MAMBO/AzTEC catalog, and four of those also have SCUBA counterparts. HDF850.1, one of the first blank-field detected submillimeter galaxies, is now detected at 2 mm. The median redshift of all sources with counterparts of known redshifts is med(z) = 2.91 +/- 0.94. Statistically, the detections are most likely real for 5 of the seven 2 mm sources without shorter wavelength counterparts, while the probability for none of them being real is negligible. △ Less

Submitted 7 June, 2014; v1 submitted 6 November, 2013; originally announced November 2013.

Comments: Accepted for publication in ApJ

Breakthrough capability for the NASA Astrophysics Explorer Program: Reaching the darkest sky

Authors: M. A. Greenhouse, S. W. Benson, R. D. Falck, D. J. Fixsen, J. P. Gardner, J. B. Garvin, J. W. Kruk, S. R. Oleson, H. A. Thronson

Abstract: We describe a mission architecture designed to substantially increase the science capability of the NASA Science Mission Directorate (SMD) Astrophysics Explorer Program for all AO proposers working within the near-UV to far-infrared spectrum. We have demonstrated that augmentation of Falcon 9 Explorer launch services with a 13 kW Solar Electric Propulsion (SEP) stage can deliver a 700 kg science o… ▽ More We describe a mission architecture designed to substantially increase the science capability of the NASA Science Mission Directorate (SMD) Astrophysics Explorer Program for all AO proposers working within the near-UV to far-infrared spectrum. We have demonstrated that augmentation of Falcon 9 Explorer launch services with a 13 kW Solar Electric Propulsion (SEP) stage can deliver a 700 kg science observatory payload to extra-Zodiacal orbit. This new capability enables up to ~13X increased photometric sensitivity and ~160X increased observing speed relative to a Sun-Earth L2, Earth-trailing, or Earth orbit with no increase in telescope aperture. All enabling SEP stage technologies for this launch service augmentation have reached sufficient readiness (TRL-6) for Explorer Program application in conjunction with the Falcon 9. We demonstrate that enabling Astrophysics Explorers to reach extra-zodiacal orbit will allow this small payload program to rival the science performance of much larger long development time systems; thus, providing a means to realize major science objectives while increasing the SMD Astrophysics portfolio diversity and resiliency to external budget pressure. The SEP technology employed in this study has strong applicability to SMD Planetary Science community-proposed missions. SEP is a stated flight demonstration priority for NASA's Office of the Chief Technologist (OCT). This new mission architecture for astrophysics Explorers enables an attractive realization of joint goals for OCT and SMD with wide applicability across SMD science disciplines. △ Less

Submitted 8 June, 2012; originally announced June 2012.

Comments: Submitted to proceedings of the SPIE Astronomical Telescopes and Instrumentation conference, Amsterdam, The Netherlands, July 2012

All-sky Observational Evidence for An Inverse Correlation between Dust Temperature and Emissivity Spectral Index

Authors: Z. Liang, D. J. Fixsen, B. Gold

Abstract: We show that a one-component variable-emissivity-spectral-index model (the free-α model) provides more physically motivated estimates of dust temperature at the Galactic polar caps than one- or two-component fixed-emissivity-spectral-index models (fixed-α models) for interstellar dust thermal emission at far-infrared and millimeter wavelengths. For the comparison we have fit all-sky one-component… ▽ More We show that a one-component variable-emissivity-spectral-index model (the free-α model) provides more physically motivated estimates of dust temperature at the Galactic polar caps than one- or two-component fixed-emissivity-spectral-index models (fixed-α models) for interstellar dust thermal emission at far-infrared and millimeter wavelengths. For the comparison we have fit all-sky one-component dust models with fixed or variable emissivity spectral index to a new and improved version of the 210-channel dust spectra from the COBE-FIRAS, the 100 - 240 μm maps from the COBE-DIRBE and the 94 GHz dust map from the WMAP. The best model, the free-α model, is well constrained by data at 60-3000 GHz over 86 per cent of the total sky area. It predicts dust temperature (Tdust) to be 13.7-22.7 (+/-1.3) K, the emissivity spectral index (α) to be 1.2 - 3.1 (+/-0.3) and the optical depth (τ) to range 0.6 - 46 x 10^(-5) at ν0 = 900 GHz (λ0 = 333 μm) with a 23 per cent uncertainty. Using these estimates, we present all-sky evidence for an inverse correlation between the emissivity spectral index and dust temperature, which fits the relation α = 1/(δ+ω Tdust) with δ = -0.510 +/- 0.011 and ω = 0.059 +/- 0.001. This best model will be useful to cosmic microwave background experiments for removing foreground dust contamination and it can serve as an all-sky extended-frequency reference for future higher resolution dust models. △ Less

Submitted 22 October, 2012; v1 submitted 29 December, 2011; originally announced January 2012.

Comments: 20 pages, 21 figures, submitted to MNRAS; corrected typos, added more details, additional graphics

The Primordial Inflation Explorer (PIXIE): A Nulling Polarimeter for Cosmic Microwave Background Observations

Authors: A. Kogut, D. J. Fixsen, D. T. Chuss, J. Dotson, E. Dwek, M. Halpern, G. F. Hinshaw, S. M. Meyer, S. H. Moseley, M. D. Seiffert, D. N. Spergel, E. J. Wollack

Abstract: The Primordial Inflation Explorer (PIXIE) is an Explorer-class mission to measure the gravity-wave signature of primordial inflation through its distinctive imprint on the linear polarization of the cosmic microwave background. The instrument consists of a polarizing Michelson interferometer configured as a nulling polarimeter to measure the difference spectrum between orthogonal linear polarizati… ▽ More The Primordial Inflation Explorer (PIXIE) is an Explorer-class mission to measure the gravity-wave signature of primordial inflation through its distinctive imprint on the linear polarization of the cosmic microwave background. The instrument consists of a polarizing Michelson interferometer configured as a nulling polarimeter to measure the difference spectrum between orthogonal linear polarizations from two co-aligned beams. Either input can view the sky or a temperature-controlled absolute reference blackbody calibrator. PIXIE will map the absolute intensity and linear polarization (Stokes I, Q, and U parameters) over the full sky in 400 spectral channels spanning 2.5 decades in frequency from 30 GHz to 6 THz (1 cm to 50 um wavelength). Multi-moded optics provide background-limited sensitivity using only 4 detectors, while the highly symmetric design and multiple signal modulations provide robust rejection of potential systematic errors. The principal science goal is the detection and characterization of linear polarization from an inflationary epoch in the early universe, with tensor-to-scalar ratio r < 10^{-3} at 5 standard deviations. The rich PIXIE data set will also constrain physical processes ranging from Big Bang cosmology to the nature of the first stars to physical conditions within the interstellar medium of the Galaxy. △ Less

Submitted 10 May, 2011; originally announced May 2011.

Comments: 37 pages including 17 figures. Submitted to the Journal of Cosmology and Astroparticle Physics

Probing the Universe's Tilt with the Cosmic Infrared Background Dipole

Authors: D. J. Fixsen, A. Kashlinsky

Abstract: Conventional interpretation of the observed cosmic microwave background (CMB) dipole is that all of it is produced by local peculiar motions. Alternative explanations requiring part of the dipole to be primordial have received support from measurements of large-scale bulk flows. A test of the two hypothesis is whether other cosmic dipoles produced by collapsed structures later than last scattering… ▽ More Conventional interpretation of the observed cosmic microwave background (CMB) dipole is that all of it is produced by local peculiar motions. Alternative explanations requiring part of the dipole to be primordial have received support from measurements of large-scale bulk flows. A test of the two hypothesis is whether other cosmic dipoles produced by collapsed structures later than last scattering coincide with the CMB dipole. One background is the cosmic infrared background (CIB) whose absolute spectrum was measured to ~30% by the COBE satellite. Over the 100 to 500 μm wavelength range its spectral energy distribution can provide a probe of its alignment with CMB. This is tested with the COBE FIRAS dataset which is available for such a measurement because of its low noise and frequency resolution important for Galaxy subtraction. Although the FIRAS instrument noise is in principle low enough to determine the CIB dipole, the Galactic foreground is sufficiently close spectrally to keep the CIB dipole hidden. A similar analysis is performed with DIRBE, which - because of the limited frequency coverage - provides a poorer a dataset. We discuss strategies for measuring the CIB dipole with future instruments to probe the tilt and apply it to the Planck, Herschel and the proposed Pixie missions. We demonstrate that a future FIRAS-like instrument with instrument noise a factor of ~10 lower than FIRAS would make a statistically significant measurement of the CIB dipole. We find that the Planck and Herschel data sets will not allow a robust CIB dipole measurement. The Pixie instrument promises a determination of the CIB dipole and its alignment with either the CMB dipole or the dipole galaxy acceleration vector. △ Less

Submitted 2 June, 2011; v1 submitted 5 April, 2011; originally announced April 2011.

Comments: 9 pages 9 figures

Journal ref: Fixsen & Kashlinsky 2011 ApJ, 734, 61

The Radio - 2 mm Spectral Index of the Crab Nebula Measured with GISMO

Authors: R. G. Arendt, J. V. George, J. G. Staguhn, D. J. Benford, M. J. Devlin, S. R. Dicker, D. J. Fixsen, K. D. Irwin, C. A. Jhabvala, P. M. Korngut, A. Kovács, S. F. Maher, B. S. Mason, T. M. Miller, S. H. Moseley, S. Navarro, A. Sievers, J. L. Sievers, E. Sharp, E. J. Wollack

Abstract: We present results of 2 mm observations of the Crab Nebula, obtained using the Goddard-IRAM Superconducting 2 Millimeter Observer (GISMO) bolometer camera on the IRAM 30 m telescope. Additional 3.3 mm observations with the MUSTANG bolometer array on the Green Bank Telescope are also presented. The integrated 2 mm flux density of the Crab Nebula provides no evidence for the emergence of a second sy… ▽ More We present results of 2 mm observations of the Crab Nebula, obtained using the Goddard-IRAM Superconducting 2 Millimeter Observer (GISMO) bolometer camera on the IRAM 30 m telescope. Additional 3.3 mm observations with the MUSTANG bolometer array on the Green Bank Telescope are also presented. The integrated 2 mm flux density of the Crab Nebula provides no evidence for the emergence of a second synchrotron component that has been proposed. It is consistent with the radio power law spectrum, extrapolated up to a break frequency of log(nu_{b} [GHz]) = 2.84 +/- 0.29 or nu_{b} = 695^{+651}_{-336} GHz. The Crab Nebula is well-resolved by the ~16.7" beam (FWHM) of GISMO. Comparison to radio data at comparable spatial resolution enables us to confirm significant spatial variation of the spectral index between 21 cm and 2 mm. The main effect is a spectral flattening in the inner region of the Crab Nebula, correlated with the toroidal structure at the center of the nebula that is prominent in the near-IR through X-ray regime. △ Less

Submitted 31 March, 2011; originally announced March 2011.

Comments: Accepted for publication in the ApJ

The Temperature of the Cosmic Microwave Background

Authors: D. J. Fixsen

Abstract: The FIRAS data are independently recalibrated using the WMAP data to obtain a CMB temperature of 2.7260 +/- 0.0013. Measurements of the temperature of the cosmic microwave background are reviewed. The determination from the measurements from the literature is cosmic microwave background temperature of 2.72548 +/- 0.00057 K. The FIRAS data are independently recalibrated using the WMAP data to obtain a CMB temperature of 2.7260 +/- 0.0013. Measurements of the temperature of the cosmic microwave background are reviewed. The determination from the measurements from the literature is cosmic microwave background temperature of 2.72548 +/- 0.00057 K. △ Less

Submitted 10 November, 2009; v1 submitted 10 November, 2009; originally announced November 2009.

Comments: 6 Pages 3 figures

Journal ref: Astrophys.J.707:916-920,2009

ARCADE 2 Observations of Galactic Radio Emission

Authors: A. Kogut, D. J. Fixsen, S. M. Levin, M. Limon, P. M. Lubin, P. Mirel, M. Seiffert, J. Singal, T. Villela, E. Wollack, C. A. Wuensche

Abstract: We use absolutely calibrated data from the ARCADE 2 flight in July 2006 to model Galactic emission at frequencies 3, 8, and 10 GHz. The spatial structure in the data is consistent with a superposition of free-free and synchrotron emission. Emission with spatial morphology traced by the Haslam 408 MHz survey has spectral index beta_synch = -2.5 +/- 0.1, with free-free emission contributing 0.10 +… ▽ More We use absolutely calibrated data from the ARCADE 2 flight in July 2006 to model Galactic emission at frequencies 3, 8, and 10 GHz. The spatial structure in the data is consistent with a superposition of free-free and synchrotron emission. Emission with spatial morphology traced by the Haslam 408 MHz survey has spectral index beta_synch = -2.5 +/- 0.1, with free-free emission contributing 0.10 +/- 0.01 of the total Galactic plane emission in the lowest ARCADE 2 band at 3.15 GHz. We estimate the total Galactic emission toward the polar caps using either a simple plane-parallel model with csc|b| dependence or a model of high-latitude radio emission traced by the COBE/FIRAS map of CII emission. Both methods are consistent with a single power-law over the frequency range 22 MHz to 10 GHz, with total Galactic emission towards the north polar cap T_Gal = 0.498 +/- 0.028 K and spectral index beta = -2.55 +/- 0.03 at reference frequency 1 GHz. The well calibrated ARCADE 2 maps provide a new test for spinning dust emission, based on the integrated intensity of emission from the Galactic plane instead of cross-correlations with the thermal dust spatial morphology. The Galactic plane intensity measured by ARCADE 2 is fainter than predicted by models without spinning dust, and is consistent with spinning dust contributing 0.4 +/- 0.1 of the Galactic plane emission at 22 GHz. △ Less

Submitted 5 January, 2009; originally announced January 2009.

Comments: 10 poges, 9 figures. Submitted to The Astrophysical Journal

Journal ref: Astrophys.J.734:4,2011

Interpretation of the Extragalactic Radio Background

Authors: M. Seiffert, D. J. Fixsen, A. Kogut, S. M. Levin, M. Limon, P. M. Lubin, P. Mirel, J. Singal, T. Villela, E. Wollack, C. A. Wuensche

Abstract: We use absolutely calibrated data between 3 and 90 GHz from the 2006 balloon flight of the ARCADE 2 instrument, along with previous measurements at other frequencies, to constrain models of extragalactic emission. Such emission is a combination of the Cosmic Microwave Background (CMB) monopole, Galactic foreground emission, the integrated contribution of radio emission from external galaxies, an… ▽ More We use absolutely calibrated data between 3 and 90 GHz from the 2006 balloon flight of the ARCADE 2 instrument, along with previous measurements at other frequencies, to constrain models of extragalactic emission. Such emission is a combination of the Cosmic Microwave Background (CMB) monopole, Galactic foreground emission, the integrated contribution of radio emission from external galaxies, any spectral distortions present in the CMB, and any other extragalactic source. After removal of estimates of foreground emission from our own Galaxy, and the estimated contribution of external galaxies, we present fits to a combination of the flat-spectrum CMB and potential spectral distortions in the CMB. We find 2 sigma upper limits to CMB spectral distortions of mu < 5.8 x 10^{-5} and Y_ff < 6.2 x 10^{-5}. We also find a significant detection of a residual signal beyond that which can be explained by the CMB plus the integrated radio emission from galaxies estimated from existing surveys. After subtraction of an estimate of the contribution of discrete radio sources, this unexplained signal is consistent with extragalactic emission in the form of a power law with amplitude 1.06 \pm 0.11 K at 1 GHz and a spectral index of -2.56 \pm 0.04. △ Less

Submitted 5 January, 2009; originally announced January 2009.

Comments: 8 pages, 4 figures

ARCADE 2 Measurement of the Extra-Galactic Sky Temperature at 3-90 GHz

Authors: D. J. Fixsen, A. Kogut, S. Levin, M. Limon, P. Lubin, P. Mirel, M. Seiffert, J. Singal, E. Wollack, T. Villela, C. A. Wuensche

Abstract: The ARCADE 2 instrument has measured the absolute temperature of the sky at frequencies 3, 8, 10, 30, and 90 GHz, using an open-aperture cryogenic instrument observing at balloon altitudes with no emissive windows between the beam-forming optics and the sky. An external blackbody calibrator provides an {\it in situ} reference. Systematic errors were greatly reduced by using differential radiomet… ▽ More The ARCADE 2 instrument has measured the absolute temperature of the sky at frequencies 3, 8, 10, 30, and 90 GHz, using an open-aperture cryogenic instrument observing at balloon altitudes with no emissive windows between the beam-forming optics and the sky. An external blackbody calibrator provides an {\it in situ} reference. Systematic errors were greatly reduced by using differential radiometers and cooling all critical components to physical temperatures approximating the CMB temperature. A linear model is used to compare the output of each radiometer to a set of thermometers on the instrument. Small corrections are made for the residual emission from the flight train, balloon, atmosphere, and foreground Galactic emission. The ARCADE 2 data alone show an extragalactic rise of $50\pm7$ mK at 3.3 GHz in addition to a CMB temperature of $2.730\pm .004$ K. Combining the ARCADE 2 data with data from the literature shows a background power law spectrum of $T=1.26\pm 0.09$ [K] $(ν/ν_0)^{-2.60\pm 0.04}$ from 22 MHz to 10 GHz ($ν_0=1$ GHz) in addition to a CMB temperature of $2.725\pm .001$ K. △ Less

Submitted 5 January, 2009; originally announced January 2009.

Comments: 11 pages 5 figures Submitted to ApJ

The ARCADE 2 Instrument

Authors: J. Singal, D. J. Fixsen, A. Kogut, S. Levin, M. Limon, P. Lubin, P. Mirel, M. Seiffert, T. Villela, E. Wollack, C. A. Wuensche

Abstract: The second generation Absolute Radiometer for Cosmology, Astrophysics, and Diffuse Emission (ARCADE 2) instrument is a balloon-borne experiment to measure the radiometric temperature of the cosmic microwave background and Galactic and extra-Galactic emission at six frequencies from 3 to 90 GHz. ARCADE 2 utilizes a double-nulled design where emission from the sky is compared to that from an extern… ▽ More The second generation Absolute Radiometer for Cosmology, Astrophysics, and Diffuse Emission (ARCADE 2) instrument is a balloon-borne experiment to measure the radiometric temperature of the cosmic microwave background and Galactic and extra-Galactic emission at six frequencies from 3 to 90 GHz. ARCADE 2 utilizes a double-nulled design where emission from the sky is compared to that from an external cryogenic full-aperture blackbody calibrator by cryogenic switching radiometers containing internal blackbody reference loads. In order to further minimize sources of systematic error, ARCADE 2 features a cold fully open aperture with all radiometrically active components maintained at near 2.7 K without windows or other warm objects, achieved through a novel thermal design. We discuss the design and performance of the ARCADE 2 instrument in its 2005 and 2006 flights. △ Less

Submitted 2 April, 2010; v1 submitted 5 January, 2009; originally announced January 2009.

Comments: 12 pages, 14 figues, 3 tables, 2 figures added, Accepted to ApJ

Journal ref: Astrophys.J.730:138,2011

The optical performance of frequency selective bolometers

Authors: T. A. Perera, T. C. Chen, E. S. Cheng, D. A. Cottingham, T. M. Crawford, T. P. Downes, F. M. Finkbeiner, D. J. Fixsen, D. W. Logan, S. S. Meyer, E. H. Sharp, R. F. Silverberg, G. W. Wilson

Abstract: Frequency Selective Bolometers (FSBs) are a new type of detector for millimeter and sub-millimeter wavelengths that are transparent to all but a narrow range of frequencies as set by characteristics of the absorber itself. Therefore, stacks of FSBs tuned to different frequencies provide a low-loss compact method for utilizing a large fraction of the light collected by a telescope. Tests of proto… ▽ More Frequency Selective Bolometers (FSBs) are a new type of detector for millimeter and sub-millimeter wavelengths that are transparent to all but a narrow range of frequencies as set by characteristics of the absorber itself. Therefore, stacks of FSBs tuned to different frequencies provide a low-loss compact method for utilizing a large fraction of the light collected by a telescope. Tests of prototype FSBs, described here, indicate that the absorption spectra are well predicted by models, that peak absolute absorption efficiencies of order 50% are attainable, and that their out-of-band transmission is high. △ Less

Submitted 19 October, 2006; originally announced October 2006.

Comments: 32 pages, 9 figures

Journal ref: Appl.Opt.45:7643-7651,2006

Design and Calibration of a Cryogenic Blackbody Calibrator at Centimeter Wavelengths

Authors: A. Kogut, E. Wollack, D. J. Fixsen, M. Limon, P. Mirel, S. Levin, M. Seiffert, P. M. Lubin

Abstract: We describe the design and calibration of an external cryogenic blackbody calibrator used for the first two flights of the Absolute Radiometer for Cosmology, Astrophysics, and Diffuse Emission (ARCADE) instrument. The calibrator consists of a microwave absorber weakly coupled to a superfluid liquid helium bath. Half-wave corrugations viewed 30 deg off axis reduce the return loss below -35 dB. Ru… ▽ More We describe the design and calibration of an external cryogenic blackbody calibrator used for the first two flights of the Absolute Radiometer for Cosmology, Astrophysics, and Diffuse Emission (ARCADE) instrument. The calibrator consists of a microwave absorber weakly coupled to a superfluid liquid helium bath. Half-wave corrugations viewed 30 deg off axis reduce the return loss below -35 dB. Ruthenium oxide resistive thermometers embedded within the absorber monitor the temperature across the face of the calibrator. The thermal calibration transfers the calibration of a reference thermometer to the flight thermometers using the flight thermometer readout system. Data taken near the superfluid transition in 8 independent calibrations 4 years apart agree within 0.3 mK, providing an independent verification of the thermometer calibration at temperatures near that of the cosmic microwave background. △ Less

Submitted 24 February, 2004; originally announced February 2004.

Comments: 5 pages including 5 figures. Submitted to Review of Scientific Instruments

Journal ref: Rev.Sci.Instrum. 75 (2004) 5079-5083

The Temperature of the CMB at 10 GHz

Authors: D. J. Fixsen, A. Kogut, S. Levin, M. Limon, P. Lubin, P. Mirel, M. Seiffert, E. Wollack

Abstract: We report the results of an effort to measure the low frequency portion of the spectrum of the Cosmic Microwave Background Radiation (CMB), using a balloon-borne instrument called ARCADE (Absolute Radiometer for Cosmology, Astrophysics, and Diffuse Emission). These measurements are to search for deviations from a thermal spectrum that are expected to exist in the CMB due to various processes in… ▽ More We report the results of an effort to measure the low frequency portion of the spectrum of the Cosmic Microwave Background Radiation (CMB), using a balloon-borne instrument called ARCADE (Absolute Radiometer for Cosmology, Astrophysics, and Diffuse Emission). These measurements are to search for deviations from a thermal spectrum that are expected to exist in the CMB due to various processes in the early universe. The radiometric temperature was measured at 10 and 30 GHz using a cryogenic open-aperture instrument with no emissive windows. An external blackbody calibrator provides an in situ reference. A linear model is used to compare the radiometer output to a set of thermometers on the instrument. The unmodeled residuals are less than 50 mK peak-to-peak with a weighted RMS of 6 mK. Small corrections are made for the residual emission from the flight train, atmosphere, and foreground Galactic emission. The measured radiometric temperature of the CMB is 2.721 +/- 0.010 K at 10 GHz and 2.694 +/- 0.032 K at 30 GHz. △ Less

Submitted 24 February, 2004; originally announced February 2004.

Comments: 8 pages including 5 figures. Submitted to The Astrophysical Journal

Journal ref: Astrophys.J. 612 (2004) 86-95

An Instrument to Measure the Temperature of the Cosmic Microwave Background Radiation at Centimeter Wavelengths

Authors: A. Kogut, D. J. Fixsen, S. Levin, M. Limon, P. M. Lubin, P. Mirel, M. Seiffert, E. Wollack

Abstract: The Absolute Radiometer for Cosmology, Astrophysics, and Diffuse Emission (ARCADE) is a balloon-borne instrument to measure the temperature of the cosmic microwave background at centimeter wavelengths. ARCADE uses narrow-band cryogenic radiometers to compare the sky to an external full-aperture calibrator. To minimize potential sources of systematic error, ARCADE uses a novel open-aperture desig… ▽ More The Absolute Radiometer for Cosmology, Astrophysics, and Diffuse Emission (ARCADE) is a balloon-borne instrument to measure the temperature of the cosmic microwave background at centimeter wavelengths. ARCADE uses narrow-band cryogenic radiometers to compare the sky to an external full-aperture calibrator. To minimize potential sources of systematic error, ARCADE uses a novel open-aperture design which maintains the antennas and calibrator at temperatures near 3 K at the mouth of an open bucket Dewar, without windows or other warm objects between the antennas and the sky. We discuss the design and performance of the ARCADE instrument from its 2001 and 2003 flights. △ Less

Submitted 24 February, 2004; originally announced February 2004.

Comments: 6 pages including 5 figures. Submitted to The Astrophysical Journal

The Spectrum of Integrated Millimeter Flux of the Magellanic Clouds and 30-Doradus from TopHat and DIRBE Data

Authors: J. E. Aguirre, J. J. Bezaire, E. S. Cheng, D. A. Cottingham, S. S. Cordone, T. M. Crawford, D. J. Fixsen, L. Knox, S. S. Meyer, H. U. Norgaard-Nielsen, R. F. Silverberg, P. Timbie, G. W. Wilson

Abstract: We present measurements of the integrated flux relative to the local background of the Large and Small Magellanic Clouds and the region 30-Doradus (the Tarantula Nebula) in the LMC in four frequency bands centered at 245, 400, 460, and 630 GHz, based on observations made with the TopHat telescope. We combine these observations with the corresponding measurements for the DIRBE bands 8, 9, and 10… ▽ More We present measurements of the integrated flux relative to the local background of the Large and Small Magellanic Clouds and the region 30-Doradus (the Tarantula Nebula) in the LMC in four frequency bands centered at 245, 400, 460, and 630 GHz, based on observations made with the TopHat telescope. We combine these observations with the corresponding measurements for the DIRBE bands 8, 9, and 10 to cover the frequency range 245 - 3000 GHz (100 - 1220 micrometers) for these objects. We present spectra for all three objects and fit these spectra to a single-component greybody emission model and report best-fit dust temperatures, optical depths, and emissivity power-law indices, and we compare these results with other measurements in these regions and elsewhere. Using published dust grain opacities, we estimate the mass of the measured dust component in the three regions. △ Less

Submitted 20 June, 2003; originally announced June 2003.

Comments: 41 pages, 4 figures. Accepted for publication in Astrophysical Journal

Journal ref: Astrophys.J.596:273-286,2003

Implications of the Sample Rate on Large Space Telescopes

Authors: D. J. Fixsen, R. H. Cornett

Abstract: The frequency at which a large space telescope's (e.g. NGST's) detector chips are read, or the sample rate, is tightly coupled to many hardware and operational aspects of the telescope's instrument and data handling elements. In this paper we discuss many of the drivers and important implications fo the sample rate: the data rate to the ground; onboard computer storage, bandwidth, and speed; the… ▽ More The frequency at which a large space telescope's (e.g. NGST's) detector chips are read, or the sample rate, is tightly coupled to many hardware and operational aspects of the telescope's instrument and data handling elements. In this paper we discuss many of the drivers and important implications fo the sample rate: the data rate to the ground; onboard computer storage, bandwidth, and speed; the number of A->D chips, and therefore the overall size and power requirements of the analog electronics; cryocabling requirements; and detector noise and power. We discuss and parametrize these and other elements related to sample rate. Finally, we discuss the implications of sample rate in the context of achieving the most important science goals under the constraint of fixed cost. △ Less

Submitted 11 October, 2002; originally announced October 2002.

Comments: 15 pages

Journal ref: Exper.Astron. 12 (2001) 179-193

A Low Noise Thermometer Readout for Ruthenium Oxide Resistors

Authors: D. J. Fixsen, P. G. A. Mirel, A. Kogut, M. Seiffert

Abstract: The thermometer and thermal control system, for the Absolute Radiometer for Cosmology, Astrophysics, and Diffuse Emission (ARCADE) experiment, is described, including the design, testing, and results from the first flight of ARCADE. The noise is equivalent to about 1 Omega or 0.15 mK in a second for the RuO_2 resistive thermometers at 2.7 K. The average power dissipation in each thermometer is 1… ▽ More The thermometer and thermal control system, for the Absolute Radiometer for Cosmology, Astrophysics, and Diffuse Emission (ARCADE) experiment, is described, including the design, testing, and results from the first flight of ARCADE. The noise is equivalent to about 1 Omega or 0.15 mK in a second for the RuO_2 resistive thermometers at 2.7 K. The average power dissipation in each thermometer is 1 nW. The control system can take full advantage of the thermometers to maintain stable temperatures. Systematic effects are still under investigation, but the measured precision and accuracy are sufficient to allow measurement of the cosmic background spectrum. Journal-ref: Review of Scientific Instruments Vol 73 #10 (Oct 2002) △ Less

Submitted 30 August, 2002; originally announced August 2002.

Comments: 5 pages text 7 figures

Journal ref: Rev.Sci.Instrum. 73 (2002) 3659-3663

Quantum Gravity and Astrophysics: The Microwave Background and Other Thermal Sources

Authors: Rosanne Di Stefano, L. H. Ford, Hongwei Yu, D. J. Fixsen

Abstract: The problem of formulating a fully consistent quantum gravity theory (QGT) has not yet been solved. Even before we are able to work out the details of a complete theory, however, we do know some important qualitative features to be expected in any quantum theory. Fluctuations of the metric, for example, are expected and are associated with fluctuations of the lightcone. Lightcone fluctuations af… ▽ More The problem of formulating a fully consistent quantum gravity theory (QGT) has not yet been solved. Even before we are able to work out the details of a complete theory, however, we do know some important qualitative features to be expected in any quantum theory. Fluctuations of the metric, for example, are expected and are associated with fluctuations of the lightcone. Lightcone fluctuations affect the arrival time of signals from distant sources in potentially measurable ways, broadening the spectra. In this paper, we start with a thermal spectrum and derive the form of spectral changes expected in a wide class of QGTs. We apply these results, valid for any thermal spectrum, to the cosmic microwave background (CMB). The CMB offers two advantages: (1) deviations from a thermal spectrum are well constrained, and (2) the radiation emanates from the most distant source of light, the surface of last scattering. We use existing CMB data to derive an upper bound on the value of $Δt,$ the mean spread in arrival times due to metric fluctuations: ${Δt} < 2.1 \times 10^{-14}$ s at the 95% confidence limit. This limit applies to a wide range of QGTs, and falsifies those predicting a larger spread in arrival times. We find this limit rules out at least one QGT, the 5-dimensional theory in which the "extra" dimension is flat. Tests of other models may also be possible, depending on the results of calculations to predict values of Δt,$ and also a second time scale, $τ_c,$ the correlation time, which is the characteristic time scale of the metric fluctuations. We show that stronger limits on the value of $Δt,$ hence on lightcone fluctuations, can likely be derived through observations of of higher-T sources, e.g., in the X-ray and gamma-ray regimes. △ Less

Submitted 29 June, 2001; originally announced July 2001.

Comments: Submitted to ApJ, 30 pages, 8 figures

Validation of Up-the-Ramp Sampling with Cosmic Ray Rejection on IR Detectors

Authors: J. D. Offenberg, D. J. Fixsen, B. J. Rauscher, W. J. Forrest, R. J. Hanisch, J. C. Mather, M. E. McKelvey, R. E. McMurray, M. A. Nieto-Santisteban, J. L. Pipher, R. Sengupta, H. S. Stockman

Abstract: We examine cosmic ray rejection methodology on data collected from InSb and Si:As detectors. The application of an Up-the-Ramp sampling technique with cosmic ray identification and mitigation is the focus of this study. This technique is valuable for space-based observatories which are exposed to high-radiation environments. We validate the Up-the-Ramp approach on radiation-test data sets with I… ▽ More We examine cosmic ray rejection methodology on data collected from InSb and Si:As detectors. The application of an Up-the-Ramp sampling technique with cosmic ray identification and mitigation is the focus of this study. This technique is valuable for space-based observatories which are exposed to high-radiation environments. We validate the Up-the-Ramp approach on radiation-test data sets with InSb and Si:As detectors which were generated for SIRTF. The Up-the-Ramp sampling method studied in this paper is over 99.9% effective at removing cosmic rays and preserves the structure and photometric quality of the image to well within the measurement error. △ Less

Submitted 25 October, 2000; v1 submitted 17 August, 2000; originally announced August 2000.

Comments: 30 pages, 13 figures. Accepted for publication in the PASP, 25 October 2000

Journal ref: Publ.Astron.Soc.Pac. 113 (2000) 240

Cosmic Ray Rejection and Readout Efficiency for Large-Area Arrays

Authors: D. J. Fixsen, J. D. Offenberg, R. J. Hanisch, J. C. Mather, M. A. Nieto-Santisteban, R. Sengupta, H. S. Stockman

Abstract: We present an algorithm to optimally process uniformly sampled array image data obtained with a nondestructive readout. The algorithm discards full wells, removes cosmic ray (particle) hits and other glitches, and makes a nearly optimum estimate of the signal on each pixel. The algorithm also compresses the data. The computer requirements are modest, and the results are robust. The results are s… ▽ More We present an algorithm to optimally process uniformly sampled array image data obtained with a nondestructive readout. The algorithm discards full wells, removes cosmic ray (particle) hits and other glitches, and makes a nearly optimum estimate of the signal on each pixel. The algorithm also compresses the data. The computer requirements are modest, and the results are robust. The results are shown and compared to results of Fowler sampled and processed data. Non-ideal detector performance may require some additional code, but this is not expected to cost much processing time. Known types of detector faults are addressed. △ Less

Submitted 24 May, 2000; originally announced May 2000.

Comments: This paper has been accepted for publication in the PASP

Journal ref: Publ.Astron.Soc.Pac. 112 (2000) 1350-1359

Multi-Read Out Data Simulator

Authors: J. D. Offenberg, R. J. Hanisch, D. J. Fixsen, H. S. Stockman, M. A. Nieto-Santisteban, R. Sengupta, J. C. Mather

Abstract: We present a data simulation package designed to create a series of simulated data samples for a detector with non-destructive sampling capability. The original intent of this software was to provide a method for generating simulated images for the Next Generation Space Telescope, but it is general enough to apply to almost any non-destructive detector or instrument. MultiDataSim can be used to… ▽ More We present a data simulation package designed to create a series of simulated data samples for a detector with non-destructive sampling capability. The original intent of this software was to provide a method for generating simulated images for the Next Generation Space Telescope, but it is general enough to apply to almost any non-destructive detector or instrument. MultiDataSim can be used to generate "practice" sampling strategies for an instrument or field-of-view, and thus can be used to identify optimal observation strategies. △ Less

Submitted 19 May, 2000; originally announced May 2000.

Comments: Short paper plus source code for the MultiDataSim software

Calibrating Array Detectors

Authors: D. J. Fixsen, S. H. Moseley, R. G. Arendt

Abstract: The development of sensitive large format imaging arrays for the infrared promises to provide revolutionary capabilities for space astronomy. For example, the Infrared Array Camera (IRAC) on SIRTF will use four 256 x 256 arrays to provide background limited high spatial resolution images of the sky in the 3 to 8 micron spectral region. In order to reach the performance limits possible with this… ▽ More The development of sensitive large format imaging arrays for the infrared promises to provide revolutionary capabilities for space astronomy. For example, the Infrared Array Camera (IRAC) on SIRTF will use four 256 x 256 arrays to provide background limited high spatial resolution images of the sky in the 3 to 8 micron spectral region. In order to reach the performance limits possible with this generation of sensitive detectors, calibration procedures must be developed so that uncertainties in detector calibration will always be dominated by photon statistics from the dark sky as a major system noise source. In the near infrared, where the faint extragalactic sky is observed through the scattered and reemitted zodiacal light from our solar system, calibration is particularly important. Faint sources must be detected on this brighter local foreground. We present a procedure for calibrating imaging systems and analyzing such data. In our approach, by proper choice of observing strategy, information about detector parameters is encoded in the sky measurements. Proper analysis allows us to simultaneously solve for sky brightness and detector parameters, and provides accurate formal error estimates. This approach allows us to extract the calibration from the observations themselves; little or no additional information is necessary to allow full interpretation of the data. Further, this approach allows refinement and verification of detector parameters during the mission, and thus does not depend on a priori knowledge of the system or ground calibration for interpretation of images. △ Less

Submitted 11 February, 2000; originally announced February 2000.

Comments: Scheduled for ApJS, June 2000 (16 pages, 3 JPEG figures)

Journal ref: Astrophys.J.Suppl. 128 (2000) 651

Dithering Strategies for Efficient Self-Calibration of Imaging Arrays

Authors: Richard G. Arendt, D. J. Fixsen, S. Harvey Moseley

Abstract: With high sensitivity imaging arrays, accurate calibration is essential to achieve the limits of detection of space observatories. One can simultaneously extract information about the scene being observed and the calibration properties of the detector and imaging system from redundant dithered images of a scene. There are large differences in the effectiveness of dithering strategies for allowin… ▽ More With high sensitivity imaging arrays, accurate calibration is essential to achieve the limits of detection of space observatories. One can simultaneously extract information about the scene being observed and the calibration properties of the detector and imaging system from redundant dithered images of a scene. There are large differences in the effectiveness of dithering strategies for allowing the separation of detector properties from sky brightness measurements. In this paper, we quantify these differences by develo** a figure of merit (FOM) for dithering procedures based on their usefulness for allowing calibration on all spatial scales. The figure of merit measures how well the gain characteristics of the detector are encoded in the measurements, and is independent of the techniques used to analyze the data. Patterns similar to the antenna arrangements of radio interferometers with good u-v plane coverage, are found to have good figures of merit. We present patterns for both deep surveys of limited sky areas and for shallow surveys. By choosing a strategy that encodes the calibration in the observations in an easily extractable way, we enhance our ability to calibrate our detector systems and to reach the ultimate limits of sensitivity which are required to achieve the promise of many missions. △ Less

Submitted 11 February, 2000; originally announced February 2000.

Comments: Scheduled for ApJ, June 10, 2000 (22 pages, 9 figures)

New CMB Power Spectrum Constraints from MSAMI

Authors: G. W. Wilson, L. Knox, S. Dodelson, K. Coble, E. S. Cheng, D. A. Cottingham, D. J. Fixsen, A. B. Goldin, C. A. Inman, M. S. Kowitt, S. S. Meyer, L. A. Page, J. L. Puchalla, J. E. Ruhl, R. F. Silverberg

Abstract: We present new cosmic microwave background (CMB) anisotropy results from the combined analysis of the three flights of the first Medium Scale Anisotropy Measurement (MSAM1). This balloon-borne bolometric instrument measured about 10 square degrees of sky at half-degree resolution in 4 frequency bands from 5.2 icm to 20 icm with a high signal-to-noise ratio. Here we present an overview of our ana… ▽ More We present new cosmic microwave background (CMB) anisotropy results from the combined analysis of the three flights of the first Medium Scale Anisotropy Measurement (MSAM1). This balloon-borne bolometric instrument measured about 10 square degrees of sky at half-degree resolution in 4 frequency bands from 5.2 icm to 20 icm with a high signal-to-noise ratio. Here we present an overview of our analysis methods, compare the results from the three flights, derive new constraints on the CMB power spectrum from the combined data and reduce the data to total-power Wiener-filtered maps of the CMB. A key feature of this new analysis is a determination of the amplitude of CMB fluctuations at $\ell \sim 400$. The analysis technique is described in a companion paper by Knox. △ Less

Submitted 2 February, 1999; originally announced February 1999.

Comments: 9 pages, 6 included figures

Journal ref: Astrophys.J. 532 (2000) 57-64

COBE-FIRAS Observations of Galactic Lines

Authors: D. J. Fixsen, C. L. Bennett, J. C. Mather

Abstract: The COBE Far InfraRed Absolute Spectrophotometer (FIRAS) observations constitute an unbiased survey over the wavelength range from 100 um to 1 cm over 99% of the sky. Improved calibration of the FIRAS instrument and the inclusion of all of the FIRAS data allow an improved signal to noise determination of the spectral lines by a factor of ~2 over our previous results. The resolution is low (0.45… ▽ More The COBE Far InfraRed Absolute Spectrophotometer (FIRAS) observations constitute an unbiased survey over the wavelength range from 100 um to 1 cm over 99% of the sky. Improved calibration of the FIRAS instrument and the inclusion of all of the FIRAS data allow an improved signal to noise determination of the spectral lines by a factor of ~2 over our previous results. The resolution is low (0.45 cm^{-1}) so only the strongest lines are observable. The CO chain from J=1-0 to J=8-7 is observed towards the Galactic center. The line ratios are roughly consistent with a 40 K excitation temperature. The 157.7 um C II and 205.3 um N II lines are observable over most of the sky. The 370.4 um and 609.1 um lines of C I, and the 121.9 um line of N II are observed in the Galactic plane. The line ratios at the Galactic center are consistent with a density of n_0 ~30 cm^{-3} and a UV flux of G_0 ~15 uW m^{-2} sr^{-1} (10 Habing units). The 269 um H2O line is observed toward the Galactic center in absorption. △ Less

Submitted 25 January, 1999; v1 submitted 28 October, 1998; originally announced October 1998.

Comments: 12 pages, 5 Postscript Figures, uses aaspp4.sty, minor revisions to conform to the version accepted by ApJ

Calibrator Design for the COBE Far Infrared Absolute Spectrophotometer (FIRAS)

Authors: J. C. Mather, D. J. Fixsen, R. A. Shafer, C. Mosier, D. T. Wilkinson

Abstract: The photometric errors of the external calibrator for the FIRAS instrument on the COBE are smaller than the measurement errors on the cosmic microwave background (CMBR) spectrum (typically 0.02 MJy/sr, 1 sigma), and smaller than 0.01% of the peak brightness of the CMBR. The calibrator is a re-entrant cone, shaped like a trumpet mute, made of Eccosorb iron-loaded epoxy. It fills the entire beam o… ▽ More The photometric errors of the external calibrator for the FIRAS instrument on the COBE are smaller than the measurement errors on the cosmic microwave background (CMBR) spectrum (typically 0.02 MJy/sr, 1 sigma), and smaller than 0.01% of the peak brightness of the CMBR. The calibrator is a re-entrant cone, shaped like a trumpet mute, made of Eccosorb iron-loaded epoxy. It fills the entire beam of the instrument and is the source of its accuracy. Its known errors are caused by reflections, temperature gradients, and leakage through the material and around the edge. Estimates and limits are given for all known error sources. Improvements in understanding the temperature measurements of the calibrator allow an improved CMBR temperature determination of 2.725 +/- 0.002 K. △ Less

Submitted 22 October, 1998; originally announced October 1998.

Comments: 30 pages, 9 Postscript figures, uses aasms4.sty, ApJ, 1999, 512, xxx

Journal ref: Astrophys.J. 512 (1999) 511-520

The Spectrum of the Extragalactic Far Infrared Background from the COBE Firas Observations

Authors: D. J. Fixsen, E. Dwek, J. C. Mather, C. L. Bennett, R. A. Shafer

Abstract: The COBE FIRAS data contain foreground emission from interplanetary, Galactic interstellar dust and extragalactic background emission. We use three different methods to separate the various emission components, and derive the spectrum of the extragalactic Far InfraRed Background (FIRB). Each method relies on a different set of assumptions, which affect the FIRB spectrum in different ways. Despit… ▽ More The COBE FIRAS data contain foreground emission from interplanetary, Galactic interstellar dust and extragalactic background emission. We use three different methods to separate the various emission components, and derive the spectrum of the extragalactic Far InfraRed Background (FIRB). Each method relies on a different set of assumptions, which affect the FIRB spectrum in different ways. Despite this, the FIRB spectra derived by these different methods are remarkably similar. The average spectrum that we derive in the ν= 5 - 80 cm^{-1} (2000-125 \um) frequency interval is: I(ν) = (1.3 \pm 0.4)\times10^{-5} (ν/ν_0)^{0.64 \pm 0.12} P_ν(18.5 \pm 1.2 K), where ν_0=100 cm^{-1} (λ_0=100 \um) and P is the Planck function. The derived FIRB spectrum is consistent with the DIRBE 140 and 240 \um detections. The total intensity received in the 5 - 80 cm^{-1} frequency interval is 14 nW m^{-2} sr^{-1}, and comprises about 20% of the total intensity expected from the energy release from nucleosynthesis throughout the history of the universe. △ Less

Submitted 3 March, 1998; originally announced March 1998.

Comments: 12 pages Latex (AAS macro), 4 Postscript figures, accepted by The Astrophysical Journal

Report number: COBE preprint #98-05

Journal ref: Astrophys.J.508:123,1998

Comparison of the COBE FIRAS and DIRBE Calibrations

Authors: D. J. Fixsen, J. L. Weiland, S. Brodd, M. G. Hauser, T. Kelsall, D. T. Leisawitz, J. C. Mather, K. A. Jensen, R. A. Shafer, R. F. Silverberg

Abstract: We compare the independent FIRAS and DIRBE observations from the COBE in the wavelength range 100-300 microns. This cross calibration provides checks of both data sets. The results show that the data sets are consistent within the estimated gain and offset uncertainties of the two instruments. They show the possibility of improving the gain and offset determination of DIRBE at 140 and 240 micron… ▽ More We compare the independent FIRAS and DIRBE observations from the COBE in the wavelength range 100-300 microns. This cross calibration provides checks of both data sets. The results show that the data sets are consistent within the estimated gain and offset uncertainties of the two instruments. They show the possibility of improving the gain and offset determination of DIRBE at 140 and 240 microns. △ Less

Submitted 16 July, 1997; originally announced July 1997.

Comments: Accepted for publication in the Astrophysical Journal 11 pages, plus 3 figures in separate postscript files. Figure 3 has three parts

Report number: COBE Preprint 97-1

Detection of Cosmic Microwave Background Anisotropy by the Third Flight of MSAM

Authors: E. S. Cheng, D. A. Cottingham, D. J. Fixsen, A. B. Goldin, C. A. Inman, L. Knox, M. S. Kowitt, S. S. Meyer, J. L. Puchalla, J. E. Ruhl, R. F. Silverberg

Abstract: The third flight of the Medium Scale Anisotropy Measurement (MSAM1), in June 1995, observed a new strip of sky, doubling the sky coverage of the original MSAM1 dataset. MSAM1 observes with a 0.5 deg beam size in four bands from 5-20 icm. From these four bands we derive measurements of cosmic microwave background radiation (CMBR) anisotropy and interstellar dust emission. Our measurement of dust… ▽ More The third flight of the Medium Scale Anisotropy Measurement (MSAM1), in June 1995, observed a new strip of sky, doubling the sky coverage of the original MSAM1 dataset. MSAM1 observes with a 0.5 deg beam size in four bands from 5-20 icm. From these four bands we derive measurements of cosmic microwave background radiation (CMBR) anisotropy and interstellar dust emission. Our measurement of dust emission correlates well with the 100 um IRAS Sky Survey Atlas; from this comparison we determine an effective emissivity spectral index between 100 um and 444 um of 1.46 +/- 0.28. Analysis of our measurement of CMBR anisotropy shows that for Gaussian-shaped correlation functions with theta_c = 0.3 deg, we place a limit on total rms anisotropy of 2.2 x 10^{-5} < Delta T/T < 3.9 x 10^{-5} (90% confidence interval, including calibration error). The band-power limits are <delta T> = <l (l+1)C_l/2 pi>^{1/2} = 50^{+16}_{-11} uK at l = 160, and <delta T> = 65^{+18}_{-13} uK at l = 270 (1 sigma limits, including calibration error). The corresponding limits with statistical errors only are <delta T> = 50^{+13}_{-9} uK and <delta T> = 65^{+14}_{-10} uK respectively. These measurements are consistent with a standard adiabatic cold dark matter model; we discuss constraints on h, n, and the redshift of reionization. △ Less

Submitted 17 September, 1997; v1 submitted 7 May, 1997; originally announced May 1997.

Comments: 13 pages, 3 figures, Latex, aastex4.0. To appear in ApJ

The Spectrum of the CMB Anisotropy from the Combined COBE FIRAS and DMR Observations

Authors: D. J. Fixsen, G. Hinshaw, C. L. Bennett, J. C. Mather

Abstract: We analyze the Cosmic Microwave Background (CMB) anisotropy data from the independent COBE FIRAS and DMR observations. We extract the frequency spectrum of the FIRAS signal that has the spatial distribution seen by DMR and show that it is consistent with CMB temperature fluctuations in the radiation well into the Wien region of the spectrum. Conversely, we form a map of the Planckian component o… ▽ More We analyze the Cosmic Microwave Background (CMB) anisotropy data from the independent COBE FIRAS and DMR observations. We extract the frequency spectrum of the FIRAS signal that has the spatial distribution seen by DMR and show that it is consistent with CMB temperature fluctuations in the radiation well into the Wien region of the spectrum. Conversely, we form a map of the Planckian component of the sky temperature from FIRAS and show that it correlates with the DMR anisotropy map. The rms fluctuations at angular scales of 7 degrees are 48 \pm 14 uK for the FIRAS data compared with 35 \pm 2 uK for the DMR data and 31 \pm 6 uK for the correlated combination (1 sigma uncertainties). The consistency of these data, from very different instruments with very different observing strategies, provide compelling support for the interpretation that the signal seen by DMR is, in fact, temperature anisotropy of cosmological origin. The data also limit rms fluctuations in the Compton y parameter, observable via the Sunyaev- Zel'dovich effect, to Delta_y < 3 x 10^{-6} (95% CL) on 7 degree angular scales. △ Less

Submitted 17 April, 1997; originally announced April 1997.

Comments: 15 pages, Latex (AASv4 macro) including 3 Postscript figures, to appear in ApJ, vol. 486, Sept 10, 1997