-
ANDES, the high-resolution spectrograph for the ELT: RIZ Spectrograph preliminary design
Authors:
Bruno Chazelas,
Yevgeniy Ivanisenko,
Audrey Lanotte,
Pablo Santos Diaz,
Ludovic Genolet,
Michael Sordet,
Ian Hughes,
Christophe Lovis,
Tobias M. Schmidt,
Manuel Amate,
José Peñate Castro,
Afrodisio Vega Moreno,
Fabio Tenegi,
Roberto Simoes,
Jonay I. González Hernández,
María Rosa Zapatero Osorio,
Javier Piqueras,
Tomás Belenguer Dávila,
Rocío Calvo Ortega,
Roberto Varas González,
Luis Miguel González Fernández,
Pedro J. Amado,
Jonathan Kern,
Frank Dionies,
Svend-Marian Bauer
, et al. (22 additional authors not shown)
Abstract:
We present here the preliminary design of the RIZ module, one of the visible spectrographs of the ANDES instrument 1. It is a fiber-fed high-resolution, high-stability spectrograph. Its design follows the guidelines of successful predecessors such as HARPS and ESPRESSO. In this paper we present the status of the spectrograph at the preliminary design stage. The spectrograph will be a warm, vacuum-…
▽ More
We present here the preliminary design of the RIZ module, one of the visible spectrographs of the ANDES instrument 1. It is a fiber-fed high-resolution, high-stability spectrograph. Its design follows the guidelines of successful predecessors such as HARPS and ESPRESSO. In this paper we present the status of the spectrograph at the preliminary design stage. The spectrograph will be a warm, vacuum-operated, thermally controlled and fiber-fed echelle spectrograph. Following the phase A design, the huge etendue of the telescope will be reformed in the instrument with a long slit made of smaller fibers. We discuss the system design of the spectrographs system.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
TAUKAM: a new prime-focus camera for the Tautenburg Schmidt Telescope
Authors:
Bringfried Stecklum,
Jochen Eislöffel,
Sylvio Klose,
Uwe Laux,
Tom Löwinger,
Helmut Meusinger,
Michael Pluto,
Johannes Winkler,
Frank Dionies
Abstract:
TAUKAM stands for "TAUtenburg KAMera", which will become the new prime-focus imager for the Tautenburg Schmidt telescope. It employs an e2v 6kx6k CCD and is under manufacture by Spectral Instruments Inc. We describe the design of the instrument and the auxiliary components, its specifications as well as the concept for integrating the device into the telescope infrastructure. First light is forese…
▽ More
TAUKAM stands for "TAUtenburg KAMera", which will become the new prime-focus imager for the Tautenburg Schmidt telescope. It employs an e2v 6kx6k CCD and is under manufacture by Spectral Instruments Inc. We describe the design of the instrument and the auxiliary components, its specifications as well as the concept for integrating the device into the telescope infrastructure. First light is foreseen in 2017. TAUKAM will boost the observational capabilities of the telescope for what concerns optical wide-field surveys.
△ Less
Submitted 1 February, 2021; v1 submitted 29 January, 2021;
originally announced January 2021.
-
4MOST: Project overview and information for the First Call for Proposals
Authors:
R. S. de Jong,
O. Agertz,
A. Agudo Berbel,
J. Aird,
D. A. Alexander,
A. Amarsi,
F. Anders,
R. Andrae,
B. Ansarinejad,
W. Ansorge,
P. Antilogus,
H. Anwand-Heerwart,
A. Arentsen,
A. Arnadottir,
M. Asplund,
M. Auger,
N. Azais,
D. Baade,
G. Baker,
S. Baker,
E. Balbinot,
I. K. Baldry,
M. Banerji,
S. Barden,
P. Barklem
, et al. (313 additional authors not shown)
Abstract:
We introduce the 4-metre Multi-Object Spectroscopic Telescope (4MOST), a new high-multiplex, wide-field spectroscopic survey facility under development for the four-metre-class Visible and Infrared Survey Telescope for Astronomy (VISTA) at Paranal. Its key specifications are: a large field of view (FoV) of 4.2 square degrees and a high multiplex capability, with 1624 fibres feeding two low-resolut…
▽ More
We introduce the 4-metre Multi-Object Spectroscopic Telescope (4MOST), a new high-multiplex, wide-field spectroscopic survey facility under development for the four-metre-class Visible and Infrared Survey Telescope for Astronomy (VISTA) at Paranal. Its key specifications are: a large field of view (FoV) of 4.2 square degrees and a high multiplex capability, with 1624 fibres feeding two low-resolution spectrographs ($R = λ/Δλ\sim 6500$), and 812 fibres transferring light to the high-resolution spectrograph ($R \sim 20\,000$). After a description of the instrument and its expected performance, a short overview is given of its operational scheme and planned 4MOST Consortium science; these aspects are covered in more detail in other articles in this edition of The Messenger. Finally, the processes, schedules, and policies concerning the selection of ESO Community Surveys are presented, commencing with a singular opportunity to submit Letters of Intent for Public Surveys during the first five years of 4MOST operations.
△ Less
Submitted 1 April, 2019; v1 submitted 6 March, 2019;
originally announced March 2019.
-
PEPSI: The high-resolution echelle spectrograph and polarimeter for the Large Binocular Telescope
Authors:
K. G. Strassmeier,
I. Ilyin,
A. Järvinen,
M. Weber,
M. Woche,
S. I. Barnes,
S. -M. Bauer,
E. Beckert,
W. Bittner,
R. Bredthauer,
T. A. Carroll,
C. Denker,
F. Dionies,
I. DiVarano,
D. Döscher,
T. Fechner,
D. Feuerstein,
T. Granzer,
T. Hahn,
G. Harnisch,
A. Hofmann,
M. Lesser,
J. Paschke,
S. Pankratow,
V. Plank
, et al. (4 additional authors not shown)
Abstract:
PEPSI is the bench-mounted, two-arm, fibre-fed and stabilized Potsdam Echelle Polarimetric and Spectroscopic Instrument for the 2x8.4 m Large Binocular Telescope (LBT). Three spectral resolutions of either 43 000, 120 000 or 270 000 can cover the entire optical/red wavelength range from 383 to 907 nm in three exposures. Two 10.3kx10.3k CCDs with 9-μm pixels and peak quantum efficiencies of 96 % re…
▽ More
PEPSI is the bench-mounted, two-arm, fibre-fed and stabilized Potsdam Echelle Polarimetric and Spectroscopic Instrument for the 2x8.4 m Large Binocular Telescope (LBT). Three spectral resolutions of either 43 000, 120 000 or 270 000 can cover the entire optical/red wavelength range from 383 to 907 nm in three exposures. Two 10.3kx10.3k CCDs with 9-μm pixels and peak quantum efficiencies of 96 % record a total of 92 echelle orders. We introduce a new variant of a wave-guide image slicer with 3, 5, and 7 slices and peak efficiencies between 96 %. A total of six cross dispersers cover the six wavelength settings of the spectrograph, two of them always simultaneously. These are made of a VPH-grating sandwiched by two prisms. The peak efficiency of the system, including the telescope, is 15% at 650 nm, and still 11% and 10% at 390 nm and 900 nm, respectively. In combination with the 110 m2 light-collecting capability of the LBT, we expect a limiting magnitude of 20th mag in V in the low-resolution mode. The R=120 000 mode can also be used with two, dual-beam Stokes IQUV polarimeters. The 270 000-mode is made possible with the 7-slice image slicer and a 100- μm fibre through a projected sky aperture of 0.74", comparable to the median seeing of the LBT site. The 43000-mode with 12-pixel sampling per resolution element is our bad seeing or faint-object mode. Any of the three resolution modes can either be used with sky fibers for simultaneous sky exposures or with light from a stabilized Fabry-Perot etalon for ultra-precise radial velocities. CCD-image processing is performed with the dedicated data-reduction and analysis package PEPSI-S4S. A solar feed makes use of PEPSI during day time and a 500-m feed from the 1.8 m VATT can be used when the LBT is busy otherwise. In this paper, we present the basic instrument design, its realization, and its characteristics.
△ Less
Submitted 24 May, 2015;
originally announced May 2015.
-
4MOST - 4-metre Multi-Object Spectroscopic Telescope
Authors:
Roelof S. de Jong,
Olga Bellido-Tirado,
Cristina Chiappini,
Éric Depagne,
Roger Haynes,
Diane Johl,
Olivier Schnurr,
Axel Schwope,
Jakob Walcher,
Frank Dionies,
Dionne Haynes,
Andreas Kelz,
Francisco S. Kitaura,
Georg Lamer,
Ivan Minchev,
Volker Müller,
Sebastián E. Nuza,
Jean-Christophe Olaya,
Tilmann Piffl,
Emil Popow,
Matthias Steinmetz,
Uğur Ural,
Mary Williams,
Roland Winkler,
Lutz Wisotzki
, et al. (60 additional authors not shown)
Abstract:
The 4MOST consortium is currently halfway through a Conceptual Design study for ESO with the aim to develop a wide-field (>3 square degree, goal >5 square degree), high-multiplex (>1500 fibres, goal 3000 fibres) spectroscopic survey facility for an ESO 4m-class telescope (VISTA). 4MOST will run permanently on the telescope to perform a 5 year public survey yielding more than 20 million spectra at…
▽ More
The 4MOST consortium is currently halfway through a Conceptual Design study for ESO with the aim to develop a wide-field (>3 square degree, goal >5 square degree), high-multiplex (>1500 fibres, goal 3000 fibres) spectroscopic survey facility for an ESO 4m-class telescope (VISTA). 4MOST will run permanently on the telescope to perform a 5 year public survey yielding more than 20 million spectra at resolution R~5000 (λ=390-1000 nm) and more than 2 million spectra at R~20,000 (395-456.5 nm & 587-673 nm). The 4MOST design is especially intended to complement three key all-sky, space-based observatories of prime European interest: Gaia, eROSITA and Euclid. Initial design and performance estimates for the wide-field corrector concepts are presented. We consider two fibre positioner concepts, a well-known Phi-Theta system and a new R-Theta concept with a large patrol area. The spectrographs are fixed configuration two-arm spectrographs, with dedicated spectrographs for the high- and low-resolution. A full facility simulator is being developed to guide trade-off decisions regarding the optimal field-of-view, number of fibres needed, and the relative fraction of high-to-low resolution fibres. Mock catalogues with template spectra from seven Design Reference Surveys are simulated to verify the science requirements of 4MOST. The 4MOST consortium aims to deliver the full 4MOST facility by the end of 2018 and start delivering high-level data products for both consortium and ESO community targets a year later with yearly increments.
△ Less
Submitted 28 June, 2012;
originally announced June 2012.
-
PMAS, the Potsdam Multi-Aperture Spectrophotometer. I. Design, Manufacture, and Performance
Authors:
M. M. Roth,
A. Kelz,
T. Fechner,
T. Hahn,
S. -M. Bauer,
T. Becker,
P. Boehm,
L. Christensen,
F. Dionies,
J. Paschke,
E. Popow,
D. Wolter,
J. Schmoll,
U. Laux,
W. Altmann
Abstract:
We describe the design, manufacture, commissioning, and performance of PMAS, the Potsdam Multi-Aperture Spectrophotometer. PMAS is a dedicated integral field spectrophotometer, optimized to cover the optical wavelength regime of 0.35--1um. It is based on the lens array -- fiber bundle principle of operation. The instrument employs an all-refractive fiber spectrograph, built with CaF2 optics, to…
▽ More
We describe the design, manufacture, commissioning, and performance of PMAS, the Potsdam Multi-Aperture Spectrophotometer. PMAS is a dedicated integral field spectrophotometer, optimized to cover the optical wavelength regime of 0.35--1um. It is based on the lens array -- fiber bundle principle of operation. The instrument employs an all-refractive fiber spectrograph, built with CaF2 optics, to provide good transmission and high image quality over the entire nominal wavelength range. A set of user-selectable reflective gratings provides low to medium spectral resolution in first order of approx. 1.5, 3.2, and 7 A, depending on the groove density (1200, 600, 300 gr/mm). While the standard integral field unit (IFU) uses a 16x16 element lens array, which provides seeing-limited sampling in a relatively small field-of-view (FOV) in one of three magnifications (8x8, 12x12, or 16x16 arcsec^2, respectively), a recently retrofitted bare fiber bundle IFU (PPak) expands the FOV to a hexagonal area with a footprint of 65x74 arcsec^2. Other special features include a cryogenic CCD camera for field acquisition and guiding, a nod-shuffle mode for beam switching and improved sky background subtraction, and a scanning Fabry-Perot etalon in combination with the standard IFU (PYTHEAS mode). PMAS was initially designed and built as an experimental traveling instrument with optical interfaces to various telescopes (Calar Alto 3.5m, ESO-VLT, LBT). It is offered as a common user instrument at Calar Alto under contract with MPIA Heidelberg since 2002.
△ Less
Submitted 28 February, 2005;
originally announced February 2005.