-
CAGIRE: a wide-field NIR imager for the COLIBRI 1.3 meter robotic telescope
Authors:
Alix Nouvel de la Flèche,
Jean-Luc Atteia,
Jérémie Boy,
Alain Klotz,
Arthur Langlois,
Marie Larrieu,
Romain Mathon,
Hervé Valentin,
Philippe Ambert,
Jean-Claude Clemens,
Damien Dornic,
Eric Kajfasz,
Jean Le Graët,
Olivier Llido,
Aurélia Secroun,
Olivier Boulade,
Ayoub Bounab,
Giacomo Badano,
Olivier Gravrand,
Sébastien Aufranc,
Adrien Lamoure,
Lilian Martineau,
Laurent Rubaldo,
Hervé Geoffray,
François Gonzalez
, et al. (10 additional authors not shown)
Abstract:
The use of high energy transients such as Gamma Ray Bursts (GRBs) as probes of the distant universe relies on the close collaboration between space and ground facilities. In this context, the Sino-French mission SVOM has been designed to combine a space and a ground segment and to make the most of their synergy. On the ground, the 1.3 meter robotic telescope COLIBRI, jointly developed by France an…
▽ More
The use of high energy transients such as Gamma Ray Bursts (GRBs) as probes of the distant universe relies on the close collaboration between space and ground facilities. In this context, the Sino-French mission SVOM has been designed to combine a space and a ground segment and to make the most of their synergy. On the ground, the 1.3 meter robotic telescope COLIBRI, jointly developed by France and Mexico, will quickly point the sources detected by the space hard X-ray imager ECLAIRs, in order to detect and localise their visible/NIR counterpart and alert large telescopes in minutes. COLIBRI is equipped with two visible cameras, called DDRAGO-blue and DDRAGO-red, and an infrared camera, called CAGIRE, designed for the study of high redshift GRBs candidates. Being a low-noise NIR camera mounted at the focus of an alt-azimutal robotic telescope imposes specific requirements on CAGIRE. We describe here the main characteristics of the camera: its optical, mechanical and electronics architecture, the ALFA detector, and the operation of the camera on the telescope. The instrument description is completed by three sections presenting the calibration strategy, an image simulator incorporating known detector effects, and the automatic reduction software for the ramps acquired by the detector. This paper aims at providing an overview of the instrument before its installation on the telescope.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
-
Determining the aberrations in a nearly diffraction-limited spectrograph
Authors:
B. Sánchez,
A. M. Watson,
S. Cuevas
Abstract:
We present a method to determine the static aberrations in a nearly diffraction-limited spectrograph introduced, for example, by alignment or manufacturing errors. We consider an instrument with two stages separated by a slit or image slicer located in the intermediate focal plane. In such a spectrograph, it is not trivial to distinguish aberrations in the first stage, before the slit, from those…
▽ More
We present a method to determine the static aberrations in a nearly diffraction-limited spectrograph introduced, for example, by alignment or manufacturing errors. We consider an instrument with two stages separated by a slit or image slicer located in the intermediate focal plane. In such a spectrograph, it is not trivial to distinguish aberrations in the first stage, before the slit, from those in the second, after the slit. However, our method achieves this. Measuring these aberrations separately opens the possibility of reducing them, by realignment or other means, and thereby improving the optical performance of the instrument. The method is based on fitting models to multiple images of a point source, with controlled displacements of the source perpendicular to the slit and controlled defocuses of the second stage or the detector. Fitting models to these images allows the determination of the aberrations in both stages. Our key discovery is that the displaced and defocused images provide additional information which allows us to break the ambiguity between the two stages. We present simulations that validate the performance of the method.
△ Less
Submitted 27 April, 2022;
originally announced April 2022.
-
Late Central Engine Activity in GRB 180205A
Authors:
R. L. Becerra,
A. M. Watson,
N. Fraija,
N. R. Butler,
W. H. Lee,
E. Troja,
C. G. Román-Zúñiga,
A. S. Kutyrev,
L. C. Álvarez Nuñez,
F. Ángeles,
O. Chapa,
S. Cuevas,
A. S. Farah,
J. Fuentes-Fernández,
L. Figueroa,
R. Langarica,
F. Quirós,
J. Ruíz-Díaz-Soto,
C. G. Tejada S. J. Tinoco
Abstract:
We present optical photometry of the afterglow of the long GRB 180205A with the COATLI telescope from 217 seconds to about 5 days after the {\itshape Swift}/BAT trigger. We analyse this photometry in the conjunction with the X-ray light curve from {\itshape Swift}/XRT. The late-time light curves and spectra are consistent with the standard forward-shock scenario. However, the early-time optical an…
▽ More
We present optical photometry of the afterglow of the long GRB 180205A with the COATLI telescope from 217 seconds to about 5 days after the {\itshape Swift}/BAT trigger. We analyse this photometry in the conjunction with the X-ray light curve from {\itshape Swift}/XRT. The late-time light curves and spectra are consistent with the standard forward-shock scenario. However, the early-time optical and X-ray light curves show non-typical behavior; the optical light curve exhibits a flat plateau while the X-ray light curve shows a flare. We explore several scenarios and conclude that the most likely explanation for the early behavior is late activity of the central engine.
△ Less
Submitted 17 January, 2019;
originally announced January 2019.
-
Implementation of MUAV as reference source for GLAO systems
Authors:
Raúl Rodríguez García,
Salvador Cuevas
Abstract:
We propose an alternative method to generate an artificial reference source for a Ground Layer Adaptive Optics system airborne on a Multirotor Unmanned Aerial Vehicle. Turbulence profiles from the Ground Layer at the National Astronomical Observatory in San Pedro Martir were analyzed to establish the requirements in luminosity, altitude, and flight stability of an artificial source. We found the s…
▽ More
We propose an alternative method to generate an artificial reference source for a Ground Layer Adaptive Optics system airborne on a Multirotor Unmanned Aerial Vehicle. Turbulence profiles from the Ground Layer at the National Astronomical Observatory in San Pedro Martir were analyzed to establish the requirements in luminosity, altitude, and flight stability of an artificial source. We found the source must be at least 800 m above the observatory's surface and follow a fixed trajectory to emulate the apparent movement of the stars with a stability of 1.54 cm in time intervals smaller than 18 ms. We establish some commercial and customized MUAVs can nearly accomplish this task.
△ Less
Submitted 14 June, 2019; v1 submitted 21 December, 2018;
originally announced December 2018.
-
FRIDA: diffraction-limited imaging and integral-field spectroscopy for the GTC
Authors:
Alan M. Watson,
José A. Acosta-Pulido,
Luis C. Álvarez-Núñez,
Vicente Bringas-Rico,
Nicolás Cardiel,
Salvador Cuevas,
Oscar Chapa,
José Javier Díaz García,
Stephen S. Eikenberry,
Carlos Espejo,
Rubén A. Flores-Meza,
Jorge Fuentes-Fernández,
Jesús Gallego,
José Leonardo Garcés Medina,
Francisco Garzón López,
Peter Hammersley,
Carolina Keiman,
Gerardo Lara,
José Alberto López,
Pablo L. López,
Diana Lucero,
Heidy Moreno Arce,
Sergio Pascual Ramirez,
Jesús Patrón Recio,
Almudena Prieto
, et al. (5 additional authors not shown)
Abstract:
FRIDA is a diffraction-limited imager and integral-field spectrometer that is being built for the adaptive-optics focus of the Gran Telescopio Canarias. In imaging mode FRIDA will provide scales of 0.010, 0.020 and 0.040 arcsec/pixel and in IFS mode spectral resolutions of 1500, 4000 and 30,000. FRIDA is starting systems integration and is scheduled to complete fully integrated system tests at the…
▽ More
FRIDA is a diffraction-limited imager and integral-field spectrometer that is being built for the adaptive-optics focus of the Gran Telescopio Canarias. In imaging mode FRIDA will provide scales of 0.010, 0.020 and 0.040 arcsec/pixel and in IFS mode spectral resolutions of 1500, 4000 and 30,000. FRIDA is starting systems integration and is scheduled to complete fully integrated system tests at the laboratory by the end of 2017 and to be delivered to GTC shortly thereafter. In this contribution we present a summary of its design, fabrication, current status and potential scientific applications.
△ Less
Submitted 31 May, 2016;
originally announced May 2016.
-
Improved achromatization of phase mask coronagraphs using colored apodization
Authors:
M. N'Diaye,
K. Dohlen,
S. Cuevas,
R. Soummer,
C. Sánchez-Pérez,
F. Zamkotsian
Abstract:
For direct imaging of exoplanets, a stellar coronagraph helps to remove the image of an observed bright star by attenuating the diffraction effects caused by the telescope aperture of diameter D. The Dual Zone Phase Mask (DZPM) coronagraph constitutes a promising concept since it theoretically offers a small inner working angle (IWA \sim λ_0/D), good achromaticity and high starlight rejection, typ…
▽ More
For direct imaging of exoplanets, a stellar coronagraph helps to remove the image of an observed bright star by attenuating the diffraction effects caused by the telescope aperture of diameter D. The Dual Zone Phase Mask (DZPM) coronagraph constitutes a promising concept since it theoretically offers a small inner working angle (IWA \sim λ_0/D), good achromaticity and high starlight rejection, typically reaching a 1e6 contrast at 5 λ_0/D from the star over a spectral bandwidth Δλ/λ_0 of 25% (similar to H-band). This last value proves to be encouraging for broadband imaging of young and warm Jupiter-like planets. Contrast levels higher than 1e6 are however required for the observation of older and/or less massive companions over a finite spectral bandwidth. An achromatization improvement of the DZPM coronagraph is therefore mandatory to reach such performance. In its design, the DZPM coronagraph uses a grey (or achromatic) apodization. We propose to replace it by a colored apodization to increase the performance of this coronagraphic system over a large spectral range. This innovative concept, called Colored Apodizer Phase Mask (CAPM) coronagraph, is defined with some design parameters optimized to reach the best contrast in the exoplanet search area. Once this done, we study the performance of the CAPM coronagraph in the presence of different errors to evaluate the sensitivity of our concept. A 2.5 mag contrast gain is estimated from the performance provided by the CAPM coronagraph with respect to that of the DZPM coronagraph. A 2.2e-8 intensity level at 5 λ_0/D separation is then theoretically achieved with the CAPM coronagraph in the presence of a clear circular aperture and a 25% bandwidth. In addition, our studies show that our concept is less sensitive to low than high-order aberrations for a given value of rms wavefront errors.
△ Less
Submitted 14 November, 2011;
originally announced November 2011.
-
Apodized Pupil Lyot Coronagraph Working Without Lyot Stop
Authors:
Mamadou N'Diaye,
Kjetil Dohlen,
Salvador Cuevas
Abstract:
In the context of high contrast imaging, we propose to evaluate the performance of the Apodized Pupil Lyot Coronagraph (APLC) working without Lyot Stop, namely Stop-less Lyot Coronagraph (SLLC). This coronagraph is a combination of an entrance pupil apodizer and an opaque mask in the following focal plane. However, contrary to APLC, SLLC is amputated by the traditional pupil stop. Our goal is to…
▽ More
In the context of high contrast imaging, we propose to evaluate the performance of the Apodized Pupil Lyot Coronagraph (APLC) working without Lyot Stop, namely Stop-less Lyot Coronagraph (SLLC). This coronagraph is a combination of an entrance pupil apodizer and an opaque mask in the following focal plane. However, contrary to APLC, SLLC is amputated by the traditional pupil stop. Our goal is to stress the interest of using this coronagraphic solution, in particular for instruments for which the introduction of a stellar coronagraph with Lyot stop is made impossible. We estimate the intensity attenuation achieved with SLLC and carry out our study with a focus on the case of Gran Telescopio Canarias (GTC). In a first step, numerical simulations are made assuming the absence of any aberration, thereafter SLLC performance is evaluated considering AO corrected wavefronts in our approach for ground-based instruments. SLLC performance proves to be equivalent to that obtained with APLC in presence of AO compensated atmospheric turbulence images, which Strehl ratio is S=0.552 at the wavelength lambda=1.57 mu m. This coronagraph allows to remove the peak intensity of a star image and therefore, avoid detector saturation. Moreover, it helps increasing the image dynamic range. A mean contrast gain in stellar magnitudes Delta m=0.23 is obtained with SLLC whereas APLC reaches a value Delta m=0.38.
△ Less
Submitted 9 March, 2010; v1 submitted 3 June, 2008;
originally announced June 2008.
