-
White Paper on MAAT@GTC
Authors:
Francisco Prada,
Robert Content,
Ariel Goobar,
Luca Izzo,
Enrique Pérez,
Adriano Agnello,
Carlos del Burgo,
Vik Dhillon,
José M. Diego,
Lluis Galbany,
Jorge García-Rojas,
David Jones,
Jon Lawrence,
Eduardo Martín,
Evencio Mediavilla,
M. Ángeles Pérez García,
Jorge Sánchez Almeida,
José A. Acosta Pulido,
Angel R. López-Sánchez,
Santiago Arribas,
Francisco J. Carrera,
Amalia Corral,
Inmaculada Domínguez,
Silvia Mateos,
Silvia Martínez Nuñez
, et al. (19 additional authors not shown)
Abstract:
MAAT is proposed as a visitor mirror-slicer optical system that will allow the OSIRIS spectrograph on the 10.4-m Gran telescopio CANARIAS (GTC) the capability to perform Integral Field Spectroscopy (IFS) over a seeing-limited FoV 14.20''x10'' with a slice width of 0.303''. MAAT@GTC will enhance the resolution power of OSIRIS by 1.6 times as compared to its 0.6'' wide long-slit. All the eleven OSIR…
▽ More
MAAT is proposed as a visitor mirror-slicer optical system that will allow the OSIRIS spectrograph on the 10.4-m Gran telescopio CANARIAS (GTC) the capability to perform Integral Field Spectroscopy (IFS) over a seeing-limited FoV 14.20''x10'' with a slice width of 0.303''. MAAT@GTC will enhance the resolution power of OSIRIS by 1.6 times as compared to its 0.6'' wide long-slit. All the eleven OSIRIS grisms and volume-phase holographic gratings will be available to provide broad spectral coverage with moderate resolution (R=600 up to 4100) in the 3600 - 10000 Å wavelength range. MAAT unique observing capabilities will broaden its use to the needs of the GTC community to unveil the nature of most striking phenomena in the universe well beyond time-domain astronomy. The GTC equipped with OSIRIS+MAAT will also play a fundamental role in synergy with other facilities, some of them operating on the northern ORM at La Palma. This White Paper presents the different aspects of MAAT@GTC - including scientific and technical specifications, outstanding science cases, and an outline of the instrument concept.
△ Less
Submitted 19 July, 2020; v1 submitted 3 July, 2020;
originally announced July 2020.
-
First demonstration of OH suppression in a high efficiency near-infrared spectrograph
Authors:
S. C. Ellis,
J. Bland-Hawthorn,
J. S. Lawrence,
A. J. Horton,
R. Content,
M. M. Roth,
N. Pai,
R. Zhelem,
S. Case,
E. Hernandez,
S. G. Leon-Saval,
R. Haynes,
S. S. Min,
D. Giannone,
K. Madhav,
A. Rahman,
C. Betters,
D. Haynes,
W. Couch,
L. J. Kewley,
R. McDermid,
L. Spitler,
R. G. Sharp,
S. Veilleux
Abstract:
Ground-based near-infrared astronomy is severely hampered by the forest of atmospheric emission lines resulting from the rovibrational decay of OH molecules in the upper atmosphere. The extreme brightness of these lines, as well as their spatial and temporal variability, makes accurate sky subtraction difficult. Selectively filtering these lines with OH suppression instruments has been a long stan…
▽ More
Ground-based near-infrared astronomy is severely hampered by the forest of atmospheric emission lines resulting from the rovibrational decay of OH molecules in the upper atmosphere. The extreme brightness of these lines, as well as their spatial and temporal variability, makes accurate sky subtraction difficult. Selectively filtering these lines with OH suppression instruments has been a long standing goal for near-infrared spectroscopy. We have shown previously the efficacy of fibre Bragg gratings combined with photonic lanterns for achieving OH suppression. Here we report on PRAXIS, a unique near-infrared spectrograph that is optimised for OH suppression with fibre Bragg gratings. We show for the first time that OH suppression (of any kind) is possible with high overall throughput (18 per cent end-to-end), and provide examples of the relative benefits of OH suppression.
△ Less
Submitted 12 January, 2020;
originally announced January 2020.
-
ATLAS Probe: Breakthrough Science of Galaxy Evolution, Cosmology, Milky Way, and the Solar System
Authors:
Yun Wang,
Mark Dickinson,
Lynne Hillenbrand,
Massimo Robberto,
Lee Armus,
Mario Ballardini,
Robert Barkhouser,
James Bartlett,
Peter Behroozi,
Robert A. Benjamin,
Jarle Brinchmann,
Ranga-Ram Chary,
Chia-Hsun Chuang,
Andrea Cimatti,
Charlie Conroy,
Robert Content,
Emanuele Daddi,
Megan Donahue,
Olivier Dore,
Peter Eisenhardt,
Henry C. Ferguson,
Andreas Faisst,
Wesley C. Fraser,
Karl Glazebrook,
Varoujan Gorjian
, et al. (23 additional authors not shown)
Abstract:
ATLAS (Astrophysics Telescope for Large Area Spectroscopy) is a concept for a NASA probe-class space mission. It is the spectroscopic follow-up mission to WFIRST, boosting its scientific return by obtaining deep NIR & MIR slit spectroscopy for most of the galaxies imaged by the WFIRST High Latitude Survey at z>0.5. ATLAS will measure accurate and precise redshifts for ~200M galaxies out to z=7 and…
▽ More
ATLAS (Astrophysics Telescope for Large Area Spectroscopy) is a concept for a NASA probe-class space mission. It is the spectroscopic follow-up mission to WFIRST, boosting its scientific return by obtaining deep NIR & MIR slit spectroscopy for most of the galaxies imaged by the WFIRST High Latitude Survey at z>0.5. ATLAS will measure accurate and precise redshifts for ~200M galaxies out to z=7 and beyond, and deliver spectra that enable a wide range of diagnostic studies of the physical properties of galaxies over most of cosmic history. ATLAS and WFIRST together will produce a definitive 3D map of the Universe over 2000 sq deg. ATLAS Science Goals are: (1) Discover how galaxies have evolved in the cosmic web of dark matter from cosmic dawn through the peak era of galaxy assembly. (2) Discover the nature of cosmic acceleration. (3) Probe the Milky Way's dust-enshrouded regions, reaching the far side of our Galaxy. (4) Discover the bulk compositional building blocks of planetesimals formed in the outer Solar System. These flow down to the ATLAS Scientific Objectives: (1A) Trace the relation between galaxies and dark matter with less than 10% shot noise on relevant scales at 1<z<7. (1B) Probe the physics of galaxy evolution at 1<z<7. (2) Obtain definitive measurements of dark energy and tests of General Relativity. (3) Measure the 3D structure and stellar content of the inner Milky Way to a distance of 25 kpc. (4) Detect and quantify the composition of 3,000 planetesimals in the outer Solar System. ATLAS is a 1.5m telescope with a FoV of 0.4 sq deg, and uses Digital Micro-mirror Devices (DMDs) as slit selectors. It has a spectroscopic resolution of R = 1000, and a wavelength range of 1-4 microns. ATLAS has an unprecedented spectroscopic capability based on DMDs, with a spectroscopic multiplex factor ~6,000. ATLAS is designed to fit within the NASA probe-class space mission cost envelope.
△ Less
Submitted 30 August, 2019;
originally announced September 2019.
-
ATLAS Probe: Breakthrough Science of Galaxy Evolution, Cosmology, Milky Way, and the Solar System
Authors:
Yun Wang,
Massimo Robberto,
Mark Dickinson,
Lynne A. Hillenbrand,
Wesley Fraser,
Peter Behroozi,
Jarle Brinchmann,
Chia-Hsun Chuang,
Andrea Cimatti,
Robert Content,
Emanuele Daddi,
Henry C. Ferguson,
Christopher Hirata,
Michael J. Hudson,
J. Davy Kirkpatrick,
Alvaro Orsi,
Russell Ryan,
Alice Shapley,
Mario Ballardini,
Robert Barkhouser,
James Bartlett,
Robert Benjamin,
Ranga Chary,
Charlie Conroy,
Megan Donahue
, et al. (15 additional authors not shown)
Abstract:
ATLAS (Astrophysics Telescope for Large Area Spectroscopy) Probe is a concept for a NASA probe-class space mission. It is the follow-up space mission to WFIRST, boosting its scientific return by obtaining deep IR slit spectroscopy for 70% of all galaxies imaged by a 2000 sq deg WFIRST High Latitude Survey at z>0.5. ATLAS will measure accurate and precise redshifts for 200M galaxies out to z < 7, a…
▽ More
ATLAS (Astrophysics Telescope for Large Area Spectroscopy) Probe is a concept for a NASA probe-class space mission. It is the follow-up space mission to WFIRST, boosting its scientific return by obtaining deep IR slit spectroscopy for 70% of all galaxies imaged by a 2000 sq deg WFIRST High Latitude Survey at z>0.5. ATLAS will measure accurate and precise redshifts for 200M galaxies out to z < 7, and deliver spectra that enable a wide range of diagnostic studies of the physical properties of galaxies over most of cosmic history. ATLAS Probe science spans four broad categories: (1) Revolutionizing galaxy evolution studies by tracing the relation between galaxies and dark matter from galaxy groups to cosmic voids and filaments, from the epoch of reionization through the peak era of galaxy assembly; (2) Opening a new window into the dark Universe by weighing the dark matter filaments using 3D weak lensing with spectroscopic redshifts, and obtaining definitive measurements of dark energy and modification of General Relativity using galaxy clustering; (3) Probing the Milky Way's dust-enshrouded regions, reaching the far side of our Galaxy; and (4) Exploring the formation history of the outer Solar System by characterizing Kuiper Belt Objects. ATLAS Probe is a 1.5m telescope with a field of view of 0.4 sq deg, and uses Digital Micro-mirror Devices (DMDs) as slit selectors. It has a spectroscopic resolution of R = 1000 over 1-4 microns, and a spectroscopic multiplex factor >5,000. ATLAS is designed to fit within the NASA probe-class space mission cost envelope; it has a single instrument, a telescope aperture that allows for a lighter launch vehicle, and mature technology. ATLAS Probe will lead to transformative science over the entire range of astrophysics: from galaxy evolution to the dark Universe, from Solar System objects to the dusty regions of the Milky Way.
△ Less
Submitted 24 January, 2019; v1 submitted 5 February, 2018;
originally announced February 2018.
-
Hector - a new massively multiplexed IFS instrument for the Anglo-Australian Telescope
Authors:
Julia J. Bryant,
Joss Bland-Hawthorn,
Jon Lawrence,
Scott Croom,
David Brown,
Sudharshan Venkatesan,
Peter R. Gillingham,
Ross Zhelem,
Robert Content,
Will Saunders,
Nicholas F. Staszak,
Jesse van de Sande,
Warrick Couch,
Sergio Leon-Saval,
Julia Tims,
Richard McDermid,
Adam Schaefer
Abstract:
Hector will be the new massively-multiplexed integral field spectroscopy (IFS) instrument for the Anglo-Australian Telescope (AAT) in Australia and the next main dark-time instrument for the observatory. Based on the success of the SAMI instrument, which is undertaking a 3400-galaxy survey, the integral field unit (IFU) imaging fibre bundle (hexabundle) technology under-pinning SAMI is being impro…
▽ More
Hector will be the new massively-multiplexed integral field spectroscopy (IFS) instrument for the Anglo-Australian Telescope (AAT) in Australia and the next main dark-time instrument for the observatory. Based on the success of the SAMI instrument, which is undertaking a 3400-galaxy survey, the integral field unit (IFU) imaging fibre bundle (hexabundle) technology under-pinning SAMI is being improved to a new innovative design for Hector. The distribution of hexabundle angular sizes is matched to the galaxy survey properties in order to image 90% of galaxies out to 2 effective radii. 50-100 of these IFU imaging bundles will be positioned by 'starbug' robots across a new 3-degree field corrector top end to be purpose-built for the AAT. Many thousand fibres will then be fed into new replicable spectrographs. Fundamentally new science will be achieved compared to existing instruments due to Hector's wider field of view (3 degrees), high positioning efficiency using starbugs, higher spectroscopic resolution (R~3000-5500 from 3727-7761A, with a possible redder extension later) and large IFUs (up to 30 arcsec diameter with 61-217 fibre cores). A 100,000 galaxy IFS survey with Hector will decrypt how the accretion and merger history and large-scale environment made every galaxy different in its morphology and star formation history. The high resolution, particularly in the blue, will make Hector the only instrument to be able to measure higher-order kinematics for galaxies down to much lower velocity dispersion than in current large IFS galaxy surveys, opening up a wealth of new nearby galaxy science.
△ Less
Submitted 12 August, 2016;
originally announced August 2016.
-
PRAXIS: low thermal emission high efficiency OH suppressed fibre spectrograph
Authors:
Robert Content,
Joss Bland-Hawthorn,
Simon Ellis,
Luke Gers,
Roger Haynes,
Anthony Horton,
Jon Lawrence,
Sergio Leon-Saval,
Emma Lindley,
Seong-Sik Min,
Keith Shortridge,
Nick Staszak,
Christopher Trinh,
Pascal Xavier,
Ross Zhelem
Abstract:
PRAXIS is a second generation instrument that follows on from GNOSIS, which was the first instrument using fibre Bragg gratings for OH background suppression. The Bragg gratings reflect the NIR OH lines while being transparent to light between the lines. This gives a much higher signal-noise ratio at low resolution but also at higher resolutions by removing the scattered wings of the OH lines. The…
▽ More
PRAXIS is a second generation instrument that follows on from GNOSIS, which was the first instrument using fibre Bragg gratings for OH background suppression. The Bragg gratings reflect the NIR OH lines while being transparent to light between the lines. This gives a much higher signal-noise ratio at low resolution but also at higher resolutions by removing the scattered wings of the OH lines. The specifications call for high throughput and very low thermal and detector noise so that PRAXIS will remain sky noise limited. The optical train is made of fore-optics, an IFU, a fibre bundle, the Bragg grating unit, a second fibre bundle and a spectrograph. GNOSIS used the pre-existing IRIS2 spectrograph while PRAXIS will use a new spectrograph specifically designed for the fibre Bragg grating OH suppression and optimised for 1470 nm to 1700 nm (it can also be used in the 1090 nm to 1260 nm band by changing the grating and refocussing). This results in a significantly higher transmission due to high efficiency coatings, a VPH grating at low incident angle and low absorption glasses. The detector noise will also be lower. Throughout the PRAXIS design special care was taken at every step along the optical path to reduce thermal emission or stop it leaking into the system. This made the spectrograph design challenging because practical constraints required that the detector and the spectrograph enclosures be physically separate by air at ambient temperature. At present, the instrument uses the GNOSIS fibre Bragg grating OH suppression unit. We intend to soon use a new OH suppression unit based on multicore fibre Bragg gratings which will allow increased field of view per fibre. Theoretical calculations show that the gain in interline sky background signal-noise ratio over GNOSIS may very well be as high as 9 with the GNOSIS OH suppression unit and 17 with the multicore fibre OH suppression unit.
△ Less
Submitted 29 July, 2014; v1 submitted 23 July, 2014;
originally announced July 2014.
-
Photonic lantern behaviour and implications for instrument design
Authors:
Anthony Horton,
Robert Content,
Simon Ellis,
Jon Lawrence
Abstract:
Photonic lanterns are an important enabling technology for astrophotonics with a wide range of potential applications including fibre Bragg grating OH suppression, integrated photonic spectrographs and fibre scramblers for high resolution spectroscopy. The behaviour of photonic lanterns differs in several important respects from the conventional fibre systems more frequently used in astronomical i…
▽ More
Photonic lanterns are an important enabling technology for astrophotonics with a wide range of potential applications including fibre Bragg grating OH suppression, integrated photonic spectrographs and fibre scramblers for high resolution spectroscopy. The behaviour of photonic lanterns differs in several important respects from the conventional fibre systems more frequently used in astronomical instruments and a detailed understanding of this behaviour is required in order to make the most effective use of this promising technology. To this end we have undertaken a laboratory study of photonic lanterns with the aim of develo** an empirical model for the map** from input to output illumination distributions. We have measured overall transmission and near field output light distributions as a function of input angle of incidence for photonic lanterns with between 19 and 61 cores. We present the results of this work, highlight the key differences between photonic lanterns and conventional fibres, and illustrate the implications for instrument design via a case study, the design of the PRAXIS spectrograph. The empirical photonic lantern model was incorporated into an end-to-end PRAXIS performance model which was used to optimise the design parameters of the instrument. We describe the methods used and the resulting conclusions. The details of photonic lantern behaviour proved particularly important in selecting the optimum on sky field of view per fibre and in modelling of the instrument thermal background.
△ Less
Submitted 15 July, 2014;
originally announced July 2014.
-
ORIGIN: Metal Creation and Evolution from the Cosmic Dawn
Authors:
J. W. den Herder,
L. Piro,
T. Ohashi,
C. Kouveliotou,
D. H. Hartmann,
J. S. Kaastra,
L. Amati,
M. I. Andersen,
M. Arnaud,
J-L. Attéia,
S. Bandler,
M. Barbera,
X. Barcons,
S. Barthelmy,
S. Basa,
S. Basso,
M. Boer,
E. Branchini,
G. Branduardi-Raymont,
S. Borgani,
A. Boyarsky,
G. Brunetti,
C. Budtz-Jorgensen,
D. Burrows,
N. Butler
, et al. (134 additional authors not shown)
Abstract:
ORIGIN is a proposal for the M3 mission call of ESA aimed at the study of metal creation from the epoch of cosmic dawn. Using high-spectral resolution in the soft X-ray band, ORIGIN will be able to identify the physical conditions of all abundant elements between C and Ni to red-shifts of z=10, and beyond. The mission will answer questions such as: When were the first metals created? How does the…
▽ More
ORIGIN is a proposal for the M3 mission call of ESA aimed at the study of metal creation from the epoch of cosmic dawn. Using high-spectral resolution in the soft X-ray band, ORIGIN will be able to identify the physical conditions of all abundant elements between C and Ni to red-shifts of z=10, and beyond. The mission will answer questions such as: When were the first metals created? How does the cosmic metal content evolve? Where do most of the metals reside in the Universe? What is the role of metals in structure formation and evolution? To reach out to the early Universe ORIGIN will use Gamma-Ray Bursts (GRBs) to study their local environments in their host galaxies. This requires the capability to slew the satellite in less than a minute to the GRB location. By studying the chemical composition and properties of clusters of galaxies we can extend the range of exploration to lower redshifts (z ~ 0.2). For this task we need a high-resolution spectral imaging instrument with a large field of view. Using the same instrument, we can also study the so far only partially detected baryons in the Warm-Hot Intergalactic Medium (WHIM). The less dense part of the WHIM will be studied using absorption lines at low redshift in the spectra for GRBs.
△ Less
Submitted 15 April, 2011; v1 submitted 11 April, 2011;
originally announced April 2011.
-
Extreme Multiplex Spectrograph: An efficient mechanical design for high-demanding requirements
Authors:
S. Becerril,
K. Meisenheimer,
C. M. Dubbeldam,
R. Content,
R. R. Rohloff,
F. Prada,
T. Shanks,
R. Sharples
Abstract:
XMS is a multi-channel wide-field spectrograph designed for the prime focus of the 3.5m Calar-Alto telescope. The instrument is composed by four quadrants, each of which contains a spectrograph channel. An innovative mechanical design -at concept/preliminary stage- has been implemented to: 1) Minimize the separation between the channels to achieve maximal filling factor; 2) Cope with the very cons…
▽ More
XMS is a multi-channel wide-field spectrograph designed for the prime focus of the 3.5m Calar-Alto telescope. The instrument is composed by four quadrants, each of which contains a spectrograph channel. An innovative mechanical design -at concept/preliminary stage- has been implemented to: 1) Minimize the separation between the channels to achieve maximal filling factor; 2) Cope with the very constraining space and mass overall requirements; 3) Achieve very tight alignment tolerances; 4) Provide lens self-centering under large temperature excursions; 5) Provide masks including 4000 slits (edges thinner than 100μ). An overview of this extremely challenging mechanical design is here presented.
△ Less
Submitted 6 August, 2010;
originally announced August 2010.
-
Extreme multiplex spectroscopy at wide-field 4-m telescopes
Authors:
Robert Content,
Tom Shanks
Abstract:
We describe the design and science case for a spectrograph for the prime focus of classical 4-m wide-field telescopes that can deliver at least 4000 MOS slits over a 1 degree field. This extreme multiplex capability means that 25000 galaxy redshifts can be measured in a single night, opening up the possibilities for large galaxy redshift surveys out to z~0.7 and beyond for the purpose of measuri…
▽ More
We describe the design and science case for a spectrograph for the prime focus of classical 4-m wide-field telescopes that can deliver at least 4000 MOS slits over a 1 degree field. This extreme multiplex capability means that 25000 galaxy redshifts can be measured in a single night, opening up the possibilities for large galaxy redshift surveys out to z~0.7 and beyond for the purpose of measuring the Baryon Acoustic Oscillation (BAO) scale and for many other science goals. The design features four cloned spectrographs and exploits the exclusive possibility of tiling the focal plane of wide-field 4-m telescopes with CCDs for multi-object spectroscopic purposes. In ~200 night projects, such spectrographs have the potential to make galaxy redshift surveys of ~6 million galaxies over a wide redshift range and thus may provide a low-cost alternative to other survey routes such as WFMOS and SKA. Two of these extreme multiplex spectrographs are currently being designed for the AAT (NG1dF) and Calar Alto (XMS) 4-m class telescopes. NG2dF, a larger version for the AAT 2 degree field, would have 12 clones and at least 12000 slits. The clones use a transparent design including a grism in which all optics are smaller than the clone square subfield so that the clones can be tightly packed with little gaps between the contiguous fields. Only low cost glasses are used; the variations in chromatic aberrations between bands are compensated by changing one or two of the lenses adjacent to the grism. The total weight and length is smaller with a few clones than a unique spectrograph which makes it feasible to place the spectrograph at the prime focus.
△ Less
Submitted 18 August, 2008;
originally announced August 2008.
-
SPACE: the SPectroscopic All-sky Cosmic Explorer
Authors:
A. Cimatti,
M. Robberto,
C. M. Baugh,
S. V. W. Beckwith,
R. Content,
E. Daddi,
G. De Lucia,
B. Garilli,
L. Guzzo,
G. Kauffmann,
M. Lehnert,
D. Maccagni,
A. Martinez-Sansigre,
F. Pasian,
I. N. Reid,
P. Rosati,
R. Salvaterra,
M. Stiavelli,
Y. Wang,
M. Zapatero Osorio,
the SPACE team
Abstract:
We describe the scientific motivations, the mission concept and the instrumentation of SPACE, a class-M mission proposed for concept study at the first call of the ESA Cosmic-Vision 2015-2025 planning cycle. SPACE aims to produce the largest three-dimensional evolutionary map of the Universe over the past 10 billion years by taking near-IR spectra and measuring redshifts for more than half a bil…
▽ More
We describe the scientific motivations, the mission concept and the instrumentation of SPACE, a class-M mission proposed for concept study at the first call of the ESA Cosmic-Vision 2015-2025 planning cycle. SPACE aims to produce the largest three-dimensional evolutionary map of the Universe over the past 10 billion years by taking near-IR spectra and measuring redshifts for more than half a billion galaxies at 0<z<2 down to AB~23 over 3πsr of the sky. In addition, SPACE will also target a smaller sky field, performing a deep spectroscopic survey of millions of galaxies to AB~26 and at 2<z<10+. These goals are unreachable with ground-based observations due to the ~500 times higher sky background. To achieve the main science objectives, SPACE will use a 1.5m diameter Ritchey-Chretien telescope equipped with a set of arrays of Digital Micro-mirror Devices (DMDs) covering a total field of view of 0.4 deg2, and will perform large-multiplexing multi-object spectroscopy (e.g. ~6000 targets per pointing) at a spectral resolution of R~400 as well as diffraction-limited imaging with continuous coverage from 0.8mum to 1.8mum.
△ Less
Submitted 28 April, 2008;
originally announced April 2008.
-
Design and construction of the IMACS-IFU, a 2000-element integral field unit
Authors:
J. Schmoll,
G. N. Dodsworth,
R. Content,
J. R. Allington-Smith
Abstract:
The IMACS-IFU is an Integral Field Unit built for the IMACS spectrograph at the Magellan-I-Telescope at Las Campanas Observatory. It consists of two rectangular fields of 5 by 7 arcseconds, separated by roughly one arcminute. With a total number of 2000 spatial elements it is the second largest fiber-lenslet based IFU worldwide, working in a wavelength range between 400 and 900 nm. Due to the eq…
▽ More
The IMACS-IFU is an Integral Field Unit built for the IMACS spectrograph at the Magellan-I-Telescope at Las Campanas Observatory. It consists of two rectangular fields of 5 by 7 arcseconds, separated by roughly one arcminute. With a total number of 2000 spatial elements it is the second largest fiber-lenslet based IFU worldwide, working in a wavelength range between 400 and 900 nm. Due to the equally sized fields classical background subtraction, beam switching and shuffling are possible observation techniques. One particular design challenge was the single, half a metre long curved slit in combination with a non telecentric output. Besides the construction some preliminary results are described.
△ Less
Submitted 24 August, 2004;
originally announced August 2004.
-
Design of 2-m to 6-m Liquid Mirror Containers
Authors:
Robert Content
Abstract:
A new design is proposed for large (up to 6-m) liquid mirror containers. The design uses Kevlar, foam and aluminum, as in previous designs, but with a different configuration that makes the container lighter, stronger and more rigid. The results of finite element analysis are presented, consisting in the deformations due to temperature changes and to weight, and in the security factor for each m…
▽ More
A new design is proposed for large (up to 6-m) liquid mirror containers. The design uses Kevlar, foam and aluminum, as in previous designs, but with a different configuration that makes the container lighter, stronger and more rigid. The results of finite element analysis are presented, consisting in the deformations due to temperature changes and to weight, and in the security factor for each material when maximum constraints are applied. Tilt rigidity is also analyzed. They show that the composite material construction technique gives a good performance up to 6 meter diameters. The figures and tables contained in this paper can be used as recipes to build containers having diameters between 2 and 6 meters.
△ Less
Submitted 25 March, 2004;
originally announced March 2004.
-
Mechanical and Thermal Tests of the Containers of Liquid Mirrors
Authors:
E. F. Borra,
R. Content,
G. Tremblay,
A. Daigle,
Y. Huot
Abstract:
We give a generic description of a liquid mirror system and summarize some practical information useful to making them. We compare laboratory measurements of deformations, due to the weight of mercury on the container of a 3.7-m mirror and to temperature changes on a 1-m container, to finite element computer simulations. We find that the measurements agree reasonably well with the numerical simu…
▽ More
We give a generic description of a liquid mirror system and summarize some practical information useful to making them. We compare laboratory measurements of deformations, due to the weight of mercury on the container of a 3.7-m mirror and to temperature changes on a 1-m container, to finite element computer simulations. We find that the measurements agree reasonably well with the numerical simulations. The measurements on the 1-m container show no evidence of fatigue after a few thermal cycles. These results validate the computer models of containers described in a companion article.
△ Less
Submitted 25 March, 2004;
originally announced March 2004.
-
The origin of [Fe II] emission in NGC 4151
Authors:
James E. H. Turner,
Jeremy Allington-Smith,
Scott Chapman,
Robert Content,
Christine Done,
Roger Haynes,
David Lee,
Simon Morris
Abstract:
The centre of NGC 4151 has been observed in the J-band with the SMIRFS integral field unit (IFU) on the UK Infrared Telescope. A map of [Fe II] emission is derived, and compared with the distributions of the optical narrow line region and radio jet. We conclude that, because the [Fe II] emission is associated more closely with the visible narrow-line region than with the radio jet, it arises mai…
▽ More
The centre of NGC 4151 has been observed in the J-band with the SMIRFS integral field unit (IFU) on the UK Infrared Telescope. A map of [Fe II] emission is derived, and compared with the distributions of the optical narrow line region and radio jet. We conclude that, because the [Fe II] emission is associated more closely with the visible narrow-line region than with the radio jet, it arises mainly through photoionization of gas by collimated X-rays from the Seyfert nucleus. The velocity field and strength with respect to [Pa B] are found to be consistent with this argument. The performance of the IFU is considered briefly, and techniques for observation and data analysis are discussed.
△ Less
Submitted 14 March, 2002;
originally announced March 2002.
-
The GMOS integral field unit: first integral field spectroscopy with an 8m telescope
Authors:
Jeremy Allington-Smith,
Graham Murray,
Robert Content,
George Dodsworth,
Roger Davies,
Bryan W. Miller,
James Turner,
Inger Jorgensen,
Isobel Hook,
David Crampton,
Richard Murowinski
Abstract:
The Gemini Multiobject Spectrograph (GMOS) installed on the Gemini-North telescope has a facility for integral field spectroscopy over the wavelength range 0.4-1.0um. GMOS is converted to this mode by the remote insertion of an integral field unit (IFU) into the beam in place of the masks used for multiobject spectroscopy. With the IFU deployed, integral field spectroscopy is available over a fu…
▽ More
The Gemini Multiobject Spectrograph (GMOS) installed on the Gemini-North telescope has a facility for integral field spectroscopy over the wavelength range 0.4-1.0um. GMOS is converted to this mode by the remote insertion of an integral field unit (IFU) into the beam in place of the masks used for multiobject spectroscopy. With the IFU deployed, integral field spectroscopy is available over a fully-filled contiguous field of 5 x 7 arcsec with a sampling of 0.2 arcsec. A separate field of half the area, but otherwise identical, is also provided to aid background subtraction. The IFU contains 1500 lenslet-coupled fibres and is the largest-format fibre-based IFU yet tested on the sky and the first facility of any type for integral field spectroscopy employed on an 8/10m telescope. We describe the IFU and present results from commissioning.
△ Less
Submitted 18 February, 2002;
originally announced February 2002.
-
Multiple Integral Field Spectroscopy
Authors:
Gillian Wright,
Rob Ivison,
Peter Hastings,
Martyn Wells,
Ray Sharples,
Jeremy Allington-Smith,
Robert Content
Abstract:
Integral-field spectroscopy is the most effective method of exploiting the superb image quality of the ESO-VLT, allowing complex astrophysical processes to be probed on the angular scales currently accessible only for imaging data, but with the addition of information in the spectral dimension. We discuss science drivers and requirements for multiple deployable integral fields for spectroscopy i…
▽ More
Integral-field spectroscopy is the most effective method of exploiting the superb image quality of the ESO-VLT, allowing complex astrophysical processes to be probed on the angular scales currently accessible only for imaging data, but with the addition of information in the spectral dimension. We discuss science drivers and requirements for multiple deployable integral fields for spectroscopy in the near-infrared. We then describe a fully modular instrument concept which can achieve such a capability over a 5-10' field with up to 32 deployable integral fields, each fully cryogenic with 1-2.5 micron coverage at a spectral resolution of ~3000, each with a 4" x 4" field of view sampled at 0.2"/pixel to take advantage of the best K-band seeing.
△ Less
Submitted 15 February, 2002;
originally announced February 2002.
-
A Million Element Integral Field Unit (MEIFU)
Authors:
Simon Morris,
Robert Content,
Ray Sharples,
Richard Bower,
Roger Davies,
Carlton Baugh
Abstract:
We describe an instrument concept that will provide simultaneous spectra for a million spatial samples on the sky. With the proposed field of view and spectral resolution, it will be able to measure redshifts and line strengths for around 2-4000 z~3-7 galaxies in a 16 night campaign. The main science driver is to obtain a complete census of the star formation properties of galaxies with 2.5<z<6.…
▽ More
We describe an instrument concept that will provide simultaneous spectra for a million spatial samples on the sky. With the proposed field of view and spectral resolution, it will be able to measure redshifts and line strengths for around 2-4000 z~3-7 galaxies in a 16 night campaign. The main science driver is to obtain a complete census of the star formation properties of galaxies with 2.5<z<6.7 as a function of luminosity, environment, morphology and redshift. This survey will also allow us to study the evolution of the 3 dimensional power spectrum and test the connection between these early galaxies and the large scale structure of the Lyman Alpha forest. Additional science drivers include [OII] emitters with 0.13<z<1.52, abundance gradients in nearby galaxies, searches for planetary nebulae in nearby galaxy groups and clusters, lensed emission line objects, and spectroscopic searches for objects with continuum breaks. We expect that this instrument will make an ideal partner to the HST ACS, where ACS morphology and broadband colour information can complement the MEIFU spectroscopy and help remove any degeneracies in line identification.
△ Less
Submitted 8 August, 2001;
originally announced August 2001.
-
Multiple object and integral field near-infrared spectroscopy using fibers
Authors:
Roger Haynes,
David Lee,
Jeremy Allington-Smith,
Robert Content,
George Dodsworth,
Ian Lewis,
Ray Sharples,
James Turner,
John Webster,
Christine Done,
Reynier Peletier,
Ian Parry,
Scott Chapman
Abstract:
We describe a new system for multiple object spectroscopy and integral field spectroscopy at near-infrared wavelengths using optical fibers. Both modes of the SMIRFS instrument have been tested at the UK Infrared Telescope with the CGS4 infrared spectrograph. The modular system includes a common optical system to image the fiber slit onto the cold slit inside the CGS4 cryostat. The multiobject m…
▽ More
We describe a new system for multiple object spectroscopy and integral field spectroscopy at near-infrared wavelengths using optical fibers. Both modes of the SMIRFS instrument have been tested at the UK Infrared Telescope with the CGS4 infrared spectrograph. The modular system includes a common optical system to image the fiber slit onto the cold slit inside the CGS4 cryostat. The multiobject mode consists of 14 interchangeable fused silica or zirconium fluoride fibers each with a field of 4 arcsec. The integral field mode consists of 72 fused silica fibers coupled with a lenslet array to give a contiguous field of 6x4 arcsec with 0.6 arcsec sampling.
We describe the performance of both modes. For the multiobject mode, the feasibility and desirability of using fluoride fibers to extend the wavelength range into the K-band is discussed. For the integral field mode, the performance is compared with theoretical expectation with particular attention to the effect of Focal Ratio Degradation in the fibers.
These results demonstrate the feasibility of multiobject and integral field spectroscopy in the near-infrared using lenslet-coupled fiber systems. Although SMIRFS in an experimental system working with a spectrograph not designed for this purpose, the throughput and uniformity of response are good. SMIRFS points the way forward to systems with much larger numbers of elements.
△ Less
Submitted 1 September, 1999;
originally announced September 1999.
-
Ubc/Laval 2.7-Meter Liquid Mirror Telescope
Authors:
P. Hickson,
E. F. Borra,
R. Cabanac,
R. Content,
B. K. Gibson,
G. A. H. Walker
Abstract:
We report the successful development and operation of a large astronomical liquid-mirror telescope. Employing a rotating 2.7-meter diameter mirror with a surface of liquid mercury, the telescope images a half-degree diameter field centered at the zenith. Located near Vancouver, British Columbia, it is equipped with a low-noise 2048x2048-pixel CCD detector, operating in TDI mode, which produces c…
▽ More
We report the successful development and operation of a large astronomical liquid-mirror telescope. Employing a rotating 2.7-meter diameter mirror with a surface of liquid mercury, the telescope images a half-degree diameter field centered at the zenith. Located near Vancouver, British Columbia, it is equipped with a low-noise 2048x2048-pixel CCD detector, operating in TDI mode, which produces continuous imaging of a 20 arcminute-widestrip of sky with 2 minute integration time. Images with FWHM of 2 arcseconds or less are regularly obtained. This image quality is limited only by atmospheric seeing and star-trail curvature. The telescope is equipped with a series of narrow-band filters, designed to produce 40-point spectral energy distributions from 0.4 to 1.0 microns of all detected objects. These will allow classification and redshift estimation of approximately 25,000 galaxies and 1,000 quasars to a limiting magnitude of R~21.
△ Less
Submitted 21 June, 1994;
originally announced June 1994.