-
StarDICE I: sensor calibration bench and absolute photometric calibration of a Sony IMX411 sensor
Authors:
Marc Betoule,
Sarah Antier,
Emmanuel Bertin,
Pierre Éric Blanc,
Sébastien Bongard,
Johann Cohen Tanugi,
Sylvie Dagoret-Campagne,
Fabrice Feinstein,
Delphine Hardin,
Claire Juramy,
Laurent Le Guillou,
Auguste Le Van Suu,
Marc Moniez,
Jérémy Neveu,
Éric Nuss,
Bertrand Plez,
Nicolas Regnault,
Eduardo Sepulveda,
Kélian Sommer,
Thierry Souverin,
Xiao Feng Wang
Abstract:
The Hubble diagram of type-Ia supernovae (SNe-Ia) provides cosmological constraints on the nature of dark energy with an accuracy limited by the flux calibration of currently available spectrophotometric standards. The StarDICE experiment aims at establishing a 5-stage metrology chain from NIST photodiodes to stars, with a targeted accuracy of \SI{1}{mmag} in $griz$ colors. We present the first tw…
▽ More
The Hubble diagram of type-Ia supernovae (SNe-Ia) provides cosmological constraints on the nature of dark energy with an accuracy limited by the flux calibration of currently available spectrophotometric standards. The StarDICE experiment aims at establishing a 5-stage metrology chain from NIST photodiodes to stars, with a targeted accuracy of \SI{1}{mmag} in $griz$ colors. We present the first two stages, resulting in the calibration transfer from NIST photodiodes to a demonstration \SI{150}{Mpixel} CMOS sensor (Sony IMX411ALR as implemented in the QHY411M camera by QHYCCD). As a side-product, we provide full characterization of this camera. A fully automated spectrophotometric bench is built to perform the calibration transfer. The sensor readout electronics is studied using thousands of flat-field images from which we derive stability, high resolution photon transfer curves and estimates of the individual pixel gain. The sensor quantum efficiency is then measured relative to a NIST-calibrated photodiode. Flat-field scans at 16 different wavelengths are used to build maps of the sensor response. We demonstrate statistical uncertainty on quantum efficiency below \SI{0.001}{e^-/γ} between \SI{387}{nm} and \SI{950}{nm}. Systematic uncertainties in the bench optics are controlled at the level of \SI{1e-3}{e^-/γ}. Uncertainty in the overall normalization of the QE curve is 1\%. Regarding the camera we demonstrate stability in steady state conditions at the level of \SI{32.5}{ppm}. Homogeneity in the response is below \SI{1}{\percent} RMS across the entire sensor area. Quantum efficiency stays above \SI{50}{\percent} in most of the visible range, peaking well above \SI{80}{\percent} between \SI{440}{nm} and \SI{570}{nm}. Differential non-linearities at the level of \SI{1}{\percent} are detected. A simple 2-parameter model is proposed to mitigate the effect.
△ Less
Submitted 18 November, 2022; v1 submitted 9 November, 2022;
originally announced November 2022.
-
Measurement of telescope transmission using a Collimated Beam Projector
Authors:
Thierry Souverin,
Jérémy Neveu,
Marc Betoule,
Sébastien Bongard,
Sasha Brownsberger,
Johann Cohen-Tanugi,
Sylvie Dagoret-Campagne,
Fabrice Feinstein,
Claire Juramy,
Laurent Le Guillou,
Auguste Le Van Suu,
Pierre Eric Blanc,
François Hazenberg,
Eric Nuss,
Bertrand Plez,
Eduardo Sepulveda,
Kélian Sommer,
Christopher Stubbs,
Nicolas Regnault,
Elana Urbach
Abstract:
The number of type Ia supernova observations will see a significant growth within the next decade, especially thanks to the Legacy Survey of Space and Time undertaken by the Vera Rubin Observatory in Chile. With this rise, the statistical uncertainties will decrease and the flux calibration will become the main uncertainty for the characterization of dark energy. The uncertainty over the telescope…
▽ More
The number of type Ia supernova observations will see a significant growth within the next decade, especially thanks to the Legacy Survey of Space and Time undertaken by the Vera Rubin Observatory in Chile. With this rise, the statistical uncertainties will decrease and the flux calibration will become the main uncertainty for the characterization of dark energy. The uncertainty over the telescope transmission is a major systematic when measuring SNe Ia colors. Here we introduce the Collimated Beam Projector (CBP), a device that can measure the transmission of a telescope and its filters. Composed of a tunable monochromatic light source and optics to provide a parallel output beam this device is able to measure with high precision the filter transmissions. In the following, we will show how measuring precisely a telescope transmission can also improve the precision of the dark energy parameters. As an example, we will present the first results of the CBP in the context of the StarDice experiment.
△ Less
Submitted 15 June, 2022;
originally announced June 2022.
-
Overview of the Instrumentation for the Dark Energy Spectroscopic Instrument
Authors:
B. Abareshi,
J. Aguilar,
S. Ahlen,
Shadab Alam,
David M. Alexander,
R. Alfarsy,
L. Allen,
C. Allende Prieto,
O. Alves,
J. Ameel,
E. Armengaud,
J. Asorey,
Alejandro Aviles,
S. Bailey,
A. Balaguera-Antolínez,
O. Ballester,
C. Baltay,
A. Bault,
S. F. Beltran,
B. Benavides,
S. BenZvi,
A. Berti,
R. Besuner,
Florian Beutler,
D. Bianchi
, et al. (242 additional authors not shown)
Abstract:
The Dark Energy Spectroscopic Instrument (DESI) has embarked on an ambitious five-year survey to explore the nature of dark energy with spectroscopy of 40 million galaxies and quasars. DESI will determine precise redshifts and employ the Baryon Acoustic Oscillation method to measure distances from the nearby universe to z > 3.5, as well as measure the growth of structure and probe potential modifi…
▽ More
The Dark Energy Spectroscopic Instrument (DESI) has embarked on an ambitious five-year survey to explore the nature of dark energy with spectroscopy of 40 million galaxies and quasars. DESI will determine precise redshifts and employ the Baryon Acoustic Oscillation method to measure distances from the nearby universe to z > 3.5, as well as measure the growth of structure and probe potential modifications to general relativity. In this paper we describe the significant instrumentation we developed for the DESI survey. The new instrumentation includes a wide-field, 3.2-deg diameter prime-focus corrector that focuses the light onto 5020 robotic fiber positioners on the 0.812 m diameter, aspheric focal surface. The positioners and their fibers are divided among ten wedge-shaped petals. Each petal is connected to one of ten spectrographs via a contiguous, high-efficiency, nearly 50 m fiber cable bundle. The ten spectrographs each use a pair of dichroics to split the light into three channels that together record the light from 360 - 980 nm with a resolution of 2000 to 5000. We describe the science requirements, technical requirements on the instrumentation, and management of the project. DESI was installed at the 4-m Mayall telescope at Kitt Peak, and we also describe the facility upgrades to prepare for DESI and the installation and functional verification process. DESI has achieved all of its performance goals, and the DESI survey began in May 2021. Some performance highlights include RMS positioner accuracy better than 0.1", SNR per \sqrtÅ > 0.5 for a z > 2 quasar with flux 0.28e-17 erg/s/cm^2/A at 380 nm in 4000s, and median SNR = 7 of the [OII] doublet at 8e-17 erg/s/cm^2 in a 1000s exposure for emission line galaxies at z = 1.4 - 1.6. We conclude with highlights from the on-sky validation and commissioning of the instrument, key successes, and lessons learned. (abridged)
△ Less
Submitted 22 May, 2022;
originally announced May 2022.
-
Testing the 10 spectrograph units for DESI: approach and results
Authors:
S. Perruchot,
P. -E. Blanc,
J. Guy,
L. Le Guillou,
S. Ronayette,
X. Régal,
G. Castagnoli,
A. Le Van Suu,
E. Sepulveda,
E. Jullo,
J. -G. Cuby,
S. Karkar,
P. Ghislain,
P. Repain,
P. -H. Carton,
C. Magneville,
A. Ealet,
S. Escoffier,
A. Secroun,
K. Honscheid,
A. Elliot,
P. Jelinsky,
D. Brooks,
P. Doel,
Y. Duan
, et al. (12 additional authors not shown)
Abstract:
The recently commissioned Dark Energy Spectroscopic Instrument (DESI) will measure the expansion history of the Universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 sqdeg will be measured during the life of the experiment. A new prime focus corrector for the KPNO Mayall telescope delivers light to 5000 fiber optic positioners. The fibe…
▽ More
The recently commissioned Dark Energy Spectroscopic Instrument (DESI) will measure the expansion history of the Universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 sqdeg will be measured during the life of the experiment. A new prime focus corrector for the KPNO Mayall telescope delivers light to 5000 fiber optic positioners. The fibers in turn feed ten broad-band spectrographs. A consortium of Aix-Marseille University (AMU) and CNRS laboratories (LAM, OHP and CPPM) together with LPNHE (CNRS, IN2P3, Sorbonne Université and Université de Paris) and the WINLIGHT Systems company based in Pertuis (France), were in charge of integrating and validating the performance requirements of the ten full spectrographs, equipped with their cryostats, shutters and other mechanisms. We present a summary of our activity which allowed an efficient validation of the systems in a short-time schedule. We detail the main results. We emphasize the benefits of our approach and also its limitations.
△ Less
Submitted 28 January, 2021;
originally announced January 2021.
-
DDOTI: the deca-degree optical transient imager
Authors:
Alan M. Watson,
William H. Lee,
Eleonora Troja,
Carlos G. Román-Zúñiga,
Nathaniel R. Butler,
Alexander S. Kutyrev,
Neil A. Gehrels,
Fernando Ángeles,
Stéphane Basa,
Pierre-Eric Blanc,
Michel Boër,
Jose A. de Diego,
Alejandro S. Farah,
Liliana Figueroa,
Yilen Gómez Maqueo Chew,
Alain Klotz,
Fernando Quirós,
Maurico Reyes-Ruíz,
Jaime Ruíz-Diáz-Soto,
Pierre Thierry,
Silvio Tinoco
Abstract:
DDOTI will be a wide-field robotic imager consisting of six 28-cm telescopes with prime focus CCDs mounted on a common equatorial mount. Each telescope will have a field of view of 12 square degrees, will have 2 arcsec pixels, and will reach a 10-sigma limiting magnitude in 60 seconds of r = 18.7 in dark time and r = 18.0 in bright time. The set of six will provide an instantaneous field of view o…
▽ More
DDOTI will be a wide-field robotic imager consisting of six 28-cm telescopes with prime focus CCDs mounted on a common equatorial mount. Each telescope will have a field of view of 12 square degrees, will have 2 arcsec pixels, and will reach a 10-sigma limiting magnitude in 60 seconds of r = 18.7 in dark time and r = 18.0 in bright time. The set of six will provide an instantaneous field of view of about 72 square degrees. DDOTI uses commercial components almost entirely. The first DDOTI will be installed at the Observatorio Astronómico Nacional in Sierra San Pedro Martír, Baja California, México in early 2017. The main science goals of DDOTI are the localization of the optical transients associated with GRBs detected by the GBM instrument on the Fermi satellite and with gravitational-wave transients. DDOTI will also be used for studies of AGN and YSO variability and to determine the occurrence of hot Jupiters. The principal advantage of DDOTI compared to other similar projects is cost: a single DDOTI installation costs only about US$500,000. This makes it possible to contemplate a global network of DDOTI installations. Such geographic diversity would give earlier access and a higher localization rate. We are actively exploring this option.
△ Less
Submitted 2 June, 2016;
originally announced June 2016.
-
THERMAP: a mid-infrared spectro-imager for space missions to small bodies in the inner solar system
Authors:
O. Groussin,
J. Licandro,
J. Helbert,
J. -L. Reynaud,
P. Levacher,
M. Reyes García-Talavera,
V. Alí-Lagoa,
P. -E. Blanc,
E. Brageot,
B. Davidsson,
M. Delbó,
M. Deleuze,
A. Delsanti,
J. J. Diaz Garcia,
K. Dohlen,
D. Ferrand,
S. Green,
L. Jorda,
E. Joven Álvarez,
J. Knollenberg,
E. Kührt,
P. Lamy,
E. Lellouch,
J. Le Merrer,
B. Marty
, et al. (6 additional authors not shown)
Abstract:
We present THERMAP, a mid-infrared (8-16 μm) spectro-imager for space missions to small bodies in the inner solar system, developed in the framework of the MarcoPolo-R asteroid sample return mission. THERMAP is very well suited to characterize the surface thermal environment of a NEO and to map its surface composition. The instrument has two channels, one for imaging and one for spectroscopy: it i…
▽ More
We present THERMAP, a mid-infrared (8-16 μm) spectro-imager for space missions to small bodies in the inner solar system, developed in the framework of the MarcoPolo-R asteroid sample return mission. THERMAP is very well suited to characterize the surface thermal environment of a NEO and to map its surface composition. The instrument has two channels, one for imaging and one for spectroscopy: it is both a thermal camera with full 2D imaging capabilities and a slit spectrometer. THERMAP takes advantage of the recent technological developments of uncooled microbolometers detectors, sensitive in the mid-infrared spectral range. THERMAP can acquire thermal images (8-18 μm) of the surface and perform absolute temperature measurements with a precision better than 3.5 K above 200 K. THERMAP can acquire mid-infrared spectra (8-16 μm) of the surface with a spectral resolution Δλ of 0.3 μm. For surface temperatures above 350 K, spectra have a signal-to-noise ratio >60 in the spectral range 9-13 μm where most emission features occur.
△ Less
Submitted 9 September, 2015;
originally announced September 2015.
-
Thermalizing a telescope in Antarctica: Analysis of ASTEP observations
Authors:
Tristan Guillot,
Lyu Abe,
Abdelkrim Agabi,
Jean-Pierre Rivet,
Jean-Baptiste Daban,
Djamel Mekarnia,
Eric Aristidi,
Francois-Xavier Schmider,
Nicolas Crouzet,
Ivan Gonçalves,
Carole Gouvret,
Sébastien Ottogalli,
Hélène Faradji,
Pierre-Eric Blanc,
Eric Bondoux,
Franck Valbousquet
Abstract:
The installation and operation of a telescope in Antarctica represent particular challenges, in particular the requirement to operate at extremely cold temperatures, to cope with rapid temperature fluctuations and to prevent frosting. Heating of electronic subsystems is a necessity, but solutions must be found to avoid the turbulence induced by temperature fluctua- tions on the optical paths. ASTE…
▽ More
The installation and operation of a telescope in Antarctica represent particular challenges, in particular the requirement to operate at extremely cold temperatures, to cope with rapid temperature fluctuations and to prevent frosting. Heating of electronic subsystems is a necessity, but solutions must be found to avoid the turbulence induced by temperature fluctua- tions on the optical paths. ASTEP 400 is a 40 cm Newton telescope installed at the Concordia station, Dome C since 2010 for photometric observations of fields of stars and their exoplanets. While the telescope is designed to spread star light on several pixels to maximize photometric stability, we show that it is nonetheless sensitive to the extreme variations of the seeing at the ground level (between about 0.1 and 5 arcsec) and to temperature fluctuations between --30 degrees C and --80 degrees C. We analyze both day-time and night-time observations and obtain the magnitude of the seeing caused by the mirrors, dome and camera. The most important effect arises from the heating of the primary mirror which gives rise to a mirror seeing of 0.23 arcsec K--1 . We propose solutions to mitigate these effects.
△ Less
Submitted 19 June, 2015;
originally announced June 2015.
-
The secondary eclipses of WASP-19b as seen by the ASTEP 400 telescope from Antarctica
Authors:
L. Abe,
I. Gonçalves,
A. Agabi,
A. Alapini,
T. Guillot,
D. Mékarnia,
J. -P. Rivet,
F. -X. Schmider,
N. Crouzet,
J. Fortney,
F. Pont,
M. Barbieri,
J. -B. Daban,
Y. Fanteï-Caujolle,
C. Gouvret,
Y. Bresson,
A. Roussel,
S. Bonhomme,
A. Robini,
M. Dugué,
E. Bondoux,
S. Péron,
P. -Y. Petit,
J. Szulágyi,
T. Fruth
, et al. (7 additional authors not shown)
Abstract:
The ASTEP (Antarctica Search for Transiting ExoPlanets) program was originally aimed at probing the quality of the Dome C, Antarctica for the discovery and characterization of exoplanets by photometry. In the first year of operation of the 40 cm ASTEP 400 telescope (austral winter 2010), we targeted the known transiting planet WASP-19b in order to try to detect its secondary transits in the visibl…
▽ More
The ASTEP (Antarctica Search for Transiting ExoPlanets) program was originally aimed at probing the quality of the Dome C, Antarctica for the discovery and characterization of exoplanets by photometry. In the first year of operation of the 40 cm ASTEP 400 telescope (austral winter 2010), we targeted the known transiting planet WASP-19b in order to try to detect its secondary transits in the visible. This is made possible by the excellent sub-millimagnitude precision of the binned data. The WASP-19 system was observed during 24 nights in May 2010. The photometric variability level due to starspots is about 1.8% (peak-to-peak), in line with the SuperWASP data from 2007 (1.4%) and larger than in 2008 (0.07%). We find a rotation period of WASP-19 of 10.7 +/- 0.5 days, in agreement with the SuperWASP determination of 10.5 +/- 0.2 days. Theoretical models show that this can only be explained if tidal dissipation in the star is weak, i.e. the tidal dissipation factor Q'star > 3.10^7. Separately, we find evidence for a secondary eclipse of depth 390 +/- 190 ppm with a 2.0 sigma significance, a phase consistent with a circular orbit and a 3% false positive probability. Given the wavelength range of the observations (420 to 950 nm), the secondary transit depth translates into a day side brightness temperature of 2690(-220/+150) K, in line with measurements in the z' and K bands. The day side emission observed in the visible could be due either to thermal emission of an extremely hot day side with very little redistribution of heat to the night side, or to direct reflection of stellar light with a maximum geometrical albedo Ag=0.27 +/- 0.13. We also report a low-frequency oscillation well in phase at the planet orbital period, but with a lower-limit amplitude that could not be attributed to the planet phase alone, and possibly contaminated with residual lightcurve trends.
△ Less
Submitted 5 March, 2013;
originally announced March 2013.
