-
Assembly development for the Simons Observatory focal plane readout module
Authors:
Erin Healy,
Aamir M. Ali,
Kam Arnold,
Jason E. Austermann,
James A. Beall,
Sarah Marie Bruno,
Steve K. Choi,
Jake Connors,
Nicholas F. Cothar,
Bradley Dober,
Shannon M. Duff,
Nicholas Galitzki,
Gene Hilton,
Shuay-Pwu Patty Ho,
Johannes Hubmayr,
Bradley R. Johnson,
Yaqiong Li,
Michael J. Link,
Tammy J. Lucas,
Heather McCarrick,
Michael D. Niemack,
Maximiliano Silva-Feaver,
Rita F. Sonka,
Suzanne Staggs,
Eve M. Vavagiakis
, et al. (6 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a suite of instruments sensitive to temperature and polarization of the cosmic microwave background (CMB) to be located at Cerro Toco in the Atacama Desert in Chile. Five telescopes, one large aperture telescope and four small aperture telescopes, will host roughly 70,000 highly multiplexed transition edge sensor (TES) detectors operated at 100 mK. Each SO focal plan…
▽ More
The Simons Observatory (SO) is a suite of instruments sensitive to temperature and polarization of the cosmic microwave background (CMB) to be located at Cerro Toco in the Atacama Desert in Chile. Five telescopes, one large aperture telescope and four small aperture telescopes, will host roughly 70,000 highly multiplexed transition edge sensor (TES) detectors operated at 100 mK. Each SO focal plane module (UFM) couples 1,764 TESes to microwave resonators in a microwave multiplexing (uMux) readout circuit. Before detector integration, the 100 mK uMux components are packaged into multiplexing modules (UMMs), which are independently validated to ensure they meet SO performance specifications. Here we present the assembly developments of these UMM readout packages for mid frequency (90/150 GHz) and ultra high frequency (220/280 GHz) UFMs.
△ Less
Submitted 25 July, 2022; v1 submitted 12 April, 2022;
originally announced April 2022.
-
The Integration and Testing Program for the Simons Observatory Large Aperture Telescope Optics Tubes
Authors:
Kathleen Harrington,
Carlos Sierra,
Grace Chesmore,
Shreya Sutariya,
Aamir M. Ali,
Steve K. Choi,
Nicholas F. Cothard,
Simon Dicker,
Nicholas Galitzki,
Shuay-Pwu Patty Ho,
Anna M. Kofman,
Brian J. Koopman,
Jack Lashner,
Jeff McMahon,
Michael D. Niemack,
John Orlowski-Scherer,
Joseph Seibert,
Max Silva-Feaver,
Eve M. Vavagiakis,
Zhilei Xu,
Ningfeng Zhu
Abstract:
The Simons Observatory (SO) will be a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes and one large-aperture telescope, which will observe from the Atacama Desert in Chile. In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure…
▽ More
The Simons Observatory (SO) will be a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes and one large-aperture telescope, which will observe from the Atacama Desert in Chile. In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain numerous cosmological quantities, as outlined in The Simons Observatory Collaboration et al. (2019). The 6~m Large Aperture Telescope (LAT), which will target the smaller angular scales of the CMB, utilizes a cryogenic receiver (LATR) designed to house up to 13 individual optics tubes. Each optics tube is comprised of three silicon lenses, IR blocking filters, and three dual-polarization, dichroic TES detector wafers. The scientific objectives of the SO project require these optics tubes to achieve high-throughput optical performance while maintaining exquisite control of systematic effects. We describe the integration and testing program for the SO LATR optics tubes that will verify the design and assembly of the optics tubes before they are shipped to the SO site and installed in the LATR cryostat. The program includes a quick turn-around test cryostat that is used to cool single optics tubes and validate the cryogenic performance and detector readout assembly. We discuss the optical design specifications the optics tubes must meet to be deployed on sky and the suite of optical test equipment that is prepared to measure these requirements.
△ Less
Submitted 3 February, 2021;
originally announced February 2021.
-
Simons Observatory Small Aperture Telescope overview
Authors:
Kenji Kiuchi,
Shunsuke Adachi,
Aamir M. Ali,
Kam Arnold,
Peter Ashton,
Jason E. Austermann,
Andrew Bazako,
James A. Beall,
Yuji Chinone,
Gabriele Coppi,
Kevin D. Crowley,
Kevin T. Crowley,
Simon Dicker,
Bradley Dober,
Shannon M. Duff,
Giulio Fabbian,
Nicholas Galitzki,
Joseph E. Golec,
Jon E. Gudmundsson,
Kathleen Harrington,
Masaya Hasegawa,
Makoto Hattori,
Charles A. Hill,
Shuay-Pwu Patty Ho,
Johannes Hubmayr
, et al. (29 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a cosmic microwave background (CMB) experiment from the Atacama Desert in Chile comprising three small-aperture telescopes (SATs) and one large-aperture telescope (LAT). In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain…
▽ More
The Simons Observatory (SO) is a cosmic microwave background (CMB) experiment from the Atacama Desert in Chile comprising three small-aperture telescopes (SATs) and one large-aperture telescope (LAT). In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain numerous cosmological quantities. In this work, we focus on the SATs which are optimized to search for primordial gravitational waves that are detected as parity-odd polarization patterns called a B-modes on degree scales in the CMB. Each SAT employs a single optics tube with TES arrays operating at 100 mK. The high throughput optics system has a 42 cm aperture and a 35-degree field of view coupled to a 36 cm diameter focal plane. The optics consist of three metamaterial anti-re ection coated silicon lenses. Cryogenic ring baffles with engineered blackbody absorbers are installed in the optics tube to minimize the stray light. The entire optics tube is cooled to 1 K. A cryogenic continuously rotating half-wave plate near the sky side of the aperture stop helps to minimize the effect of atmospheric uctuations. The telescope warm baffling consists of a forebaffle, an elevation stage mounted co-moving shield, and a fixed ground shield that together control the far side-lobes and mitigates ground-synchronous systematics. We present the status of the SAT development.
△ Less
Submitted 28 January, 2021;
originally announced January 2021.
-
Design and Fabrication of Metamaterial Anti-Reflection Coatings for the Simons Observatory
Authors:
Joseph E. Golec,
Jeffrey J. McMahon,
Aamir M. Ali,
Grace E. Chesmore,
Leah Cooperrider,
Simon Dicker,
Nicholas Galitzki,
Kathleen Harrington,
Rebecca Jackson,
Benjamin Westbrook,
Edward J. Wollack,
Zhilei Xu,
Ningfeng Zhu
Abstract:
The Simons Observatory (SO) will be a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes and one large-aperture telescope, which will observe from the Atacama Desert in Chile. In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure…
▽ More
The Simons Observatory (SO) will be a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes and one large-aperture telescope, which will observe from the Atacama Desert in Chile. In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain numerous cosmological quantities, as outlined in The Simons Observatory Collaboration et al. (2019). These telescopes require 33 highly transparent, large aperture, refracting optics. To this end, we developed mechanically robust, highly efficient, metamaterial anti-reflection (AR) coatings with octave bandwidth coverage for silicon optics up to 46 cm in diameter for the 22-55, 75-165, and 190-310 GHz bands. We detail the design, the manufacturing approach to fabricate the SO lenses, their performance, and possible extensions of metamaterial AR coatings to optical elements made of harder materials such as alumina.
△ Less
Submitted 2 October, 2021; v1 submitted 25 January, 2021;
originally announced January 2021.
-
Comparing complex impedance and bias step measurements of Simons Observatory transition edge sensors
Authors:
Nicholas F. Cothard,
Aamir M. Ali,
Jason E. Austermann,
Steve K. Choi,
Kevin T. Crowley,
Bradley J. Dober,
Cody J. Duell,
Shannon M. Duff,
Patricio Gallardo,
Gene C. Hilton,
Shuay-Pwu Patty Ho,
Johannes Hubmayr,
Michael J. Link,
Michael D. Niemack,
Rita F. Sonka,
Suzanne T. Staggs,
Eve M. Vavagiakis,
Edward J. Wollack,
Zhilei Xu
Abstract:
The Simons Observatory (SO) will perform ground-based observations of the cosmic microwave background (CMB) with several small and large aperture telescopes, each outfitted with thousands to tens of thousands of superconducting aluminum manganese (AlMn) transition-edge sensor bolometers (TESs). In-situ characterization of TES responsivities and effective time constants will be required multiple ti…
▽ More
The Simons Observatory (SO) will perform ground-based observations of the cosmic microwave background (CMB) with several small and large aperture telescopes, each outfitted with thousands to tens of thousands of superconducting aluminum manganese (AlMn) transition-edge sensor bolometers (TESs). In-situ characterization of TES responsivities and effective time constants will be required multiple times each observing-day for calibrating time-streams during CMB map-making. Effective time constants are typically estimated in the field by briefly applying small amplitude square-waves on top of the TES DC biases, and fitting exponential decays in the bolometer response. These so-called "bias step" measurements can be rapidly implemented across entire arrays and therefore are attractive because they take up little observing time. However, individual detector complex impedance measurements, while too slow to implement during observations, can provide a fuller picture of the TES model and a better understanding of its temporal response. Here, we present the results of dark TES characterization of many prototype SO bolometers and compare the effective thermal time constants measured via bias steps to those derived from complex impedance data.
△ Less
Submitted 17 December, 2020; v1 submitted 15 December, 2020;
originally announced December 2020.
-
The Simons Observatory: the Large Aperture Telescope Receiver (LATR) Integration and Validation Results
Authors:
Zhilei Xu,
Tanay Bhandarkar,
Gabriele Coppi,
Anna M. Kofman,
John L. Orlowski-Scherer,
Ningfeng Zhu,
Aamir M. Ali,
Kam Arnold,
Jason E. Austermann,
Steve K. Choi,
Jake Connors,
Nicholas F. Cothard,
Mark Devlin,
Simon Dicker,
Bradley Dober,
Shannon M. Duff,
Giulio Fabbian,
Nicholas Galitzki,
Saianeesh K. Haridas,
Kathleen Harrington,
Erin Healy,
Shuay-Pwu Patty Ho,
Johannes Hubmayr,
Jeffrey Iuliano,
Jack Lashner
, et al. (20 additional authors not shown)
Abstract:
The Simons Observatory (SO) will observe the cosmic microwave background (CMB) from Cerro Toco in the Atacama Desert of Chile. The observatory consists of three 0.5 m Small Aperture Telescopes (SATs) and one 6 m Large Aperture Telescope (LAT), covering six frequency bands centering around 30, 40, 90, 150, 230, and 280 GHz. The SO observations will transform the understanding of our universe by cha…
▽ More
The Simons Observatory (SO) will observe the cosmic microwave background (CMB) from Cerro Toco in the Atacama Desert of Chile. The observatory consists of three 0.5 m Small Aperture Telescopes (SATs) and one 6 m Large Aperture Telescope (LAT), covering six frequency bands centering around 30, 40, 90, 150, 230, and 280 GHz. The SO observations will transform the understanding of our universe by characterizing the properties of the early universe, measuring the number of relativistic species and the mass of neutrinos, improving our understanding of galaxy evolution, and constraining the properties of cosmic reionization. As a critical instrument, the Large Aperture Telescope Receiver (LATR) is designed to cool $\sim$ 60,000 transition-edge sensors (TES) to $<$ 100 mK on a 1.7 m diameter focal plane. The unprecedented scale of the LATR drives a complex design. In this paper, we will first provide an overview of the LATR design. Integration and validation of the LATR design are discussed in detail, including mechanical strength, optical alignment, and cryogenic performance of the five cryogenic stages (80 K, 40 K, 4 K, 1 K, and 100 mK). We will also discuss the microwave-multiplexing ($μ$Mux) readout system implemented in the LATR and demonstrate the operation of dark prototype TES bolometers. The $μ$Mux readout technology enables one coaxial loop to read out $\mathcal{O}(10^3)$ TES detectors. Its implementation within the LATR serves as a critical validation for the complex RF chain design. The successful validation of the LATR performance is not only a critical milestone within the Simons Observatory, it also provides a valuable reference for other experiments, e.g. CCAT-prime and CMB-S4.
△ Less
Submitted 14 December, 2020;
originally announced December 2020.
-
The Simons Observatory: gain, bandpass and polarization-angle calibration requirements for B-mode searches
Authors:
Maximilian H. Abitbol,
David Alonso,
Sara M. Simon,
Jack Lashner,
Kevin T. Crowley,
Aamir M. Ali,
Susanna Azzoni,
Carlo Baccigalupi,
Darcy Barron,
Michael L. Brown,
Erminia Calabrese,
Julien Carron,
Yuji Chinone,
Jens Chluba,
Gabriele Coppi,
Kevin D. Crowley,
Mark Devlin,
Jo Dunkley,
Josquin Errard,
Valentina Fanfani,
Nicholas Galitzki,
Martina Gerbino,
J. Colin Hill,
Bradley R. Johnson,
Baptiste Jost
, et al. (23 additional authors not shown)
Abstract:
We quantify the calibration requirements for systematic uncertainties for next-generation ground-based observatories targeting the large-angle $B$-mode polarization of the Cosmic Microwave Background, with a focus on the Simons Observatory (SO). We explore uncertainties on gain calibration, bandpass center frequencies, and polarization angles, including the frequency variation of the latter across…
▽ More
We quantify the calibration requirements for systematic uncertainties for next-generation ground-based observatories targeting the large-angle $B$-mode polarization of the Cosmic Microwave Background, with a focus on the Simons Observatory (SO). We explore uncertainties on gain calibration, bandpass center frequencies, and polarization angles, including the frequency variation of the latter across the bandpass. We find that gain calibration and bandpass center frequencies must be known to percent levels or less to avoid biases on the tensor-to-scalar ratio $r$ on the order of $Δr\sim10^{-3}$, in line with previous findings. Polarization angles must be calibrated to the level of a few tenths of a degree, while their frequency variation between the edges of the band must be known to ${\cal O}(10)$ degrees. Given the tightness of these calibration requirements, we explore the level to which residual uncertainties on these systematics would affect the final constraints on $r$ if included in the data model and marginalized over. We find that the additional parameter freedom does not degrade the final constraints on $r$ significantly, broadening the error bar by ${\cal O}(10\%)$ at most. We validate these results by reanalyzing the latest publicly available data from the BICEP2/Keck collaboration within an extended parameter space covering both cosmological, foreground and systematic parameters. Finally, our results are discussed in light of the instrument design and calibration studies carried out within SO.
△ Less
Submitted 15 June, 2021; v1 submitted 4 November, 2020;
originally announced November 2020.
-
The Simons Observatory: Metamaterial Microwave Absorber (MMA) and its Cryogenic Applications
Authors:
Zhilei Xu,
Grace E. Chesmore,
Shunsuke Adachi,
Aamir M. Ali,
Andrew Bazarko,
Gabriele Coppi,
Mark Devlin,
Tom Devlin,
Simon R. Dicker,
Patricio A. Gallardo,
Joseph E. Golec,
Jon E. Gudmundsson,
Kathleen Harrington,
Makoto Hattori,
Anna Kofman,
Kenji Kiuchi,
Akito Kusaka,
Michele Limon,
Frederick Matsuda,
Jeff McMahon,
Federico Nati,
Michael D. Niemack,
Shreya Sutariya,
Aritoki Suzuki,
Grant P. Teply
, et al. (4 additional authors not shown)
Abstract:
Controlling stray light at millimeter wavelengths requires special optical design and selection of absorptive materials that should be compatible with cryogenic operating environments. While a wide selection of absorptive materials exists, these typically exhibit high indices of refraction and reflect/scatter a significant fraction of light before absorption. For many lower index materials such as…
▽ More
Controlling stray light at millimeter wavelengths requires special optical design and selection of absorptive materials that should be compatible with cryogenic operating environments. While a wide selection of absorptive materials exists, these typically exhibit high indices of refraction and reflect/scatter a significant fraction of light before absorption. For many lower index materials such as commercial microwave absorbers, their applications in cryogenic environments are challenging. In this paper, we present a new tool to control stray light: metamaterial microwave absorber tiles. These tiles comprise an outer metamaterial layer that approximates a lossy gradient index anti-reflection coating. They are fabricated via injection molding commercially available carbon-loaded polyurethane (25\% by mass). The injection molding technology enables mass production at low cost. The design of these tiles is presented, along with thermal tests to 1 K. Room temperature optical measurements verify their control of reflectance to less than 1\% up to 65$\circ$ angles of incidence, and control of wide angle scattering below 0.01\%. The dielectric properties of the bulk carbon-loaded material used in the tiles is also measured at different temperatures, confirming that the material maintains similar dielectric properties down to 3 K.
△ Less
Submitted 22 February, 2021; v1 submitted 5 October, 2020;
originally announced October 2020.
-
The Simons Observatory: Modeling Optical Systematics in the Large Aperture Telescope
Authors:
Jon E. Gudmundsson,
Patricio A. Gallardo,
Roberto Puddu,
Simon R. Dicker,
Alexandre E. Adler,
Aamir M. Ali,
Andrew Bazarko,
Grace E. Chesmore,
Gabriele Coppi,
Nicholas F. Cothard,
Nadia Dachlythra,
Mark Devlin,
Rolando Dünner,
Giulio Fabbian,
Nicholas Galitzki,
Joseph E. Golec,
Shuay-Pwu Patty Ho,
Peter C. Hargrave,
Anna M. Kofman,
Adrian T. Lee,
Michele Limon,
Frederick T. Matsuda,
Philip D. Mauskopf,
Kavilan Moodley,
Federico Nati
, et al. (13 additional authors not shown)
Abstract:
We present geometrical and physical optics simulation results for the Simons Observatory Large Aperture Telescope. This work was developed as part of the general design process for the telescope; allowing us to evaluate the impact of various design choices on performance metrics and potential systematic effects. The primary goal of the simulations was to evaluate the final design of the reflectors…
▽ More
We present geometrical and physical optics simulation results for the Simons Observatory Large Aperture Telescope. This work was developed as part of the general design process for the telescope; allowing us to evaluate the impact of various design choices on performance metrics and potential systematic effects. The primary goal of the simulations was to evaluate the final design of the reflectors and the cold optics which are now being built. We describe non-sequential ray tracing used to inform the design of the cold optics, including absorbers internal to each optics tube. We discuss ray tracing simulations of the telescope structure that allow us to determine geometries that minimize detector loading and mitigate spurious near-field effects that have not been resolved by the internal baffling. We also describe physical optics simulations, performed over a range of frequencies and field locations, that produce estimates of monochromatic far field beam patterns which in turn are used to gauge general optical performance. Finally, we describe simulations that shed light on beam sidelobes from panel gap diffraction.
△ Less
Submitted 21 September, 2020;
originally announced September 2020.
-
Small Aperture Telescopes for the Simons Observatory
Authors:
Aamir M. Ali,
Shunsuke Adachi,
Kam Arnold,
Peter Ashton,
Andrew Bazarko,
Yuji Chinone,
Gabriele Coppi,
Lance Corbett,
Kevin D Crowley,
Kevin T Crowley,
Mark Devlin,
Simon Dicker,
Shannon Duff,
Chris Ellis,
Nicholas Galitzki,
Neil Goeckner-Wald,
Kathleen Harrington,
Erin Healy,
Charles A Hill,
Shuay-Pwu Patty Ho,
Johannes Hubmayr,
Brian Keating,
Kenji Kiuchi,
Akito Kusaka,
Adrian T Lee
, et al. (27 additional authors not shown)
Abstract:
The Simons Observatory (SO) is an upcoming cosmic microwave background (CMB) experiment located on Cerro Toco, Chile, that will map the microwave sky in temperature and polarization in six frequency bands spanning 27 to 285 GHz. SO will consist of one 6-meter Large Aperture Telescope (LAT) fielding $\sim$30,000 detectors and an array of three 0.42-meter Small Aperture Telescopes (SATs) fielding an…
▽ More
The Simons Observatory (SO) is an upcoming cosmic microwave background (CMB) experiment located on Cerro Toco, Chile, that will map the microwave sky in temperature and polarization in six frequency bands spanning 27 to 285 GHz. SO will consist of one 6-meter Large Aperture Telescope (LAT) fielding $\sim$30,000 detectors and an array of three 0.42-meter Small Aperture Telescopes (SATs) fielding an additional 30,000 detectors. This synergy will allow for the extremely sensitive characterization of the CMB over angular scales ranging from an arcmin to tens of degrees, enabling a wide range of scientific output. Here we focus on the SATs targeting degree angular scales with successive dichroic instruments observing at Mid-Frequency (MF: 93/145 GHz), Ultra-High-Frequency (UHF: 225/285 GHz), and Low-Frequency (LF: 27/39 GHz). The three SATs will be able to map $\sim$10% of the sky to a noise level of 2 $μ$K-arcmin when combining 93 and 145 GHz. The multiple frequency bands will allow the CMB to be separated from galactic foregrounds (primarily synchrotron and dust), with the primary science goal of characterizing the primordial tensor-to-scalar ratio, $r$, at a target level of $σ\left(r\right) \approx 0.003$.
△ Less
Submitted 23 January, 2020; v1 submitted 21 January, 2020;
originally announced January 2020.
-
Dark Matter in the Central Region of the Spiral Galaxy NGC 4321
Authors:
Israa Abdulqasim Mohammed Ali,
Chorng-Yuan Hwang,
Zamri Zainal Abidin
Abstract:
We present our results of 12 CO(1-0) transition in the central region of NGC 4321 using the Atacama Large Millimeter and Sub-millimeter Array (ALMA). We found an unaccounted mass of $2.3 \times 10^9 M_{\odot}$ within the central 0.7 kpc of this galaxy. The expected mass of the supermassive black hole (SMBH) in this galaxy is much smaller than the unaccounted mass. The invisible mass is likely caus…
▽ More
We present our results of 12 CO(1-0) transition in the central region of NGC 4321 using the Atacama Large Millimeter and Sub-millimeter Array (ALMA). We found an unaccounted mass of $2.3 \times 10^9 M_{\odot}$ within the central 0.7 kpc of this galaxy. The expected mass of the supermassive black hole (SMBH) in this galaxy is much smaller than the unaccounted mass. The invisible mass is likely caused by dark matter in the central region of the galaxy, indicating a cuspy dark matter profile. We also investigated the Modified Newtonian Dynamics (MOND) as an alternative mechanism to explain the invisible mass. We noted that at the radius of 0.7 kpc of the galaxy, the acceleration is about $1.04 \times 10^-7~cm~s^-2$, which is much larger than the critical acceleration $a_{0} \sim 1.2 \times 10^-8 ~cm~s^-2$ in the MOND theory, suggesting that theory might not be able explain the unseen mass problem in central region of this galaxy.
△ Less
Submitted 13 December, 2018;
originally announced December 2018.
-
Dark Matter in the Central Region of NGC 3256
Authors:
Israa Abdulqasim Mohammed Ali,
Chorng-Yuan Hwang,
Zamri Zainal Abidin,
Adele Laurie Plunkett
Abstract:
We investigated the central mass distribution of the luminous infrared galaxy NGC 3256 at a distance of 35 Mpc by using CO(1-0) observations of the Atacama Large Millimeter and sub-millimeter Array (ALMA) and near-IR data of the Two Micron Sky Survey (2MASS). We found that there is a huge amount of invisible dynamical mass ($4.84 \times 10^{10} M_{\odot}$) in the central region of the galaxy. The…
▽ More
We investigated the central mass distribution of the luminous infrared galaxy NGC 3256 at a distance of 35 Mpc by using CO(1-0) observations of the Atacama Large Millimeter and sub-millimeter Array (ALMA) and near-IR data of the Two Micron Sky Survey (2MASS). We found that there is a huge amount of invisible dynamical mass ($4.84 \times 10^{10} M_{\odot}$) in the central region of the galaxy. The invisible mass is likely caused by some dark matter, which might have a cuspy dark matter profile. We note that this dark matter is difficult to explain with the conventional Modified Newtonian Dynamics (MOND) model, which is only applicable at a low acceleration regime, whereas the acceleration at the central region of the galaxy is relatively strong. Therefore, this discovery might pose a challenge to the conventional MOND models.
△ Less
Submitted 30 September, 2018;
originally announced October 2018.
-
SiAl Alloy Feedhorn Arrays: Material Properties, Feedhorn Design, and Astrophysical Applications
Authors:
Aamir M. Ali,
Thomas Essinger-Hileman,
Tobias Marriage,
John W. Appel,
Charles L. Bennnett,
Matthew Berkeley,
Berhanu Bulcha,
Sumit Dahal,
Kevin L. Denis,
Karwan Rostem,
Kongpop U-Yen,
Edward J. Wollack,
Lingzhen Zeng
Abstract:
We present here a study of the use of the SiAl alloy CE7 for the packaging of silicon devices at cryogenic temperatures. We report on the development of baseplates and feedhorn arrays for millimeter wave bolometric detectors for astrophysics. Existing interfaces to such detectors are typically made either of metals, which are easy to machine but mismatched to the thermal contraction profile of Si…
▽ More
We present here a study of the use of the SiAl alloy CE7 for the packaging of silicon devices at cryogenic temperatures. We report on the development of baseplates and feedhorn arrays for millimeter wave bolometric detectors for astrophysics. Existing interfaces to such detectors are typically made either of metals, which are easy to machine but mismatched to the thermal contraction profile of Si devices, or of silicon, which avoids the mismatch but is difficult to directly machine. CE7 exhibits properties of both Si and Al, which makes it uniquely well suited for this application.
We measure CE7 to a) superconduct below a critical transition temperature, $T_c$, $\sim$ 1.2 K b) have a thermal contraction profile much closer to Si than metals, which enables simple mating, and c) have a low thermal conductivity which can be improved by Au-plating. Our investigations also demonstrate that CE7 can be machined well enough to fabricate small structures, such as \#0-80 threaded holes, to tight tolerances ($\sim$ 25 $μ$m) in contrast with pure silicon and similar substrates. We have fabricated CE7 baseplates being deployed in the 93 GHz polarimeteric focal planes used in the Cosmology Large Angular Scale Surveyor (CLASS). We also report on the development of smooth-walled feedhorn arrays made of CE7 that will be used in a focal plane of dichroic 150/220 GHz detectors for the CLASS High-Frequency Camera.
△ Less
Submitted 9 July, 2018;
originally announced July 2018.