-
One-shot Imitation Learning via Interaction War**
Authors:
Ondrej Biza,
Skye Thompson,
Kishore Reddy Pagidi,
Abhinav Kumar,
Elise van der Pol,
Robin Walters,
Thomas Kipf,
Jan-Willem van de Meent,
Lawson L. S. Wong,
Robert Platt
Abstract:
Imitation learning of robot policies from few demonstrations is crucial in open-ended applications. We propose a new method, Interaction War**, for learning SE(3) robotic manipulation policies from a single demonstration. We infer the 3D mesh of each object in the environment using shape war**, a technique for aligning point clouds across object instances. Then, we represent manipulation actio…
▽ More
Imitation learning of robot policies from few demonstrations is crucial in open-ended applications. We propose a new method, Interaction War**, for learning SE(3) robotic manipulation policies from a single demonstration. We infer the 3D mesh of each object in the environment using shape war**, a technique for aligning point clouds across object instances. Then, we represent manipulation actions as keypoints on objects, which can be warped with the shape of the object. We show successful one-shot imitation learning on three simulated and real-world object re-arrangement tasks. We also demonstrate the ability of our method to predict object meshes and robot grasps in the wild.
△ Less
Submitted 4 November, 2023; v1 submitted 21 June, 2023;
originally announced June 2023.
-
Equivariant Networks for Zero-Shot Coordination
Authors:
Darius Muglich,
Christian Schroeder de Witt,
Elise van der Pol,
Shimon Whiteson,
Jakob Foerster
Abstract:
Successful coordination in Dec-POMDPs requires agents to adopt robust strategies and interpretable styles of play for their partner. A common failure mode is symmetry breaking, when agents arbitrarily converge on one out of many equivalent but mutually incompatible policies. Commonly these examples include partial observability, e.g. waving your right hand vs. left hand to convey a covert message.…
▽ More
Successful coordination in Dec-POMDPs requires agents to adopt robust strategies and interpretable styles of play for their partner. A common failure mode is symmetry breaking, when agents arbitrarily converge on one out of many equivalent but mutually incompatible policies. Commonly these examples include partial observability, e.g. waving your right hand vs. left hand to convey a covert message. In this paper, we present a novel equivariant network architecture for use in Dec-POMDPs that effectively leverages environmental symmetry for improving zero-shot coordination, doing so more effectively than prior methods. Our method also acts as a ``coordination-improvement operator'' for generic, pre-trained policies, and thus may be applied at test-time in conjunction with any self-play algorithm. We provide theoretical guarantees of our work and test on the AI benchmark task of Hanabi, where we demonstrate our methods outperforming other symmetry-aware baselines in zero-shot coordination, as well as able to improve the coordination ability of a variety of pre-trained policies. In particular, we show our method can be used to improve on the state of the art for zero-shot coordination on the Hanabi benchmark.
△ Less
Submitted 10 April, 2024; v1 submitted 21 October, 2022;
originally announced October 2022.
-
Stochastic Parallelizable Eigengap Dilation for Large Graph Clustering
Authors:
Elise van der Pol,
Ian Gemp,
Yoram Bachrach,
Richard Everett
Abstract:
Large graphs commonly appear in social networks, knowledge graphs, recommender systems, life sciences, and decision making problems. Summarizing large graphs by their high level properties is helpful in solving problems in these settings. In spectral clustering, we aim to identify clusters of nodes where most edges fall within clusters and only few edges fall between clusters. This task is importa…
▽ More
Large graphs commonly appear in social networks, knowledge graphs, recommender systems, life sciences, and decision making problems. Summarizing large graphs by their high level properties is helpful in solving problems in these settings. In spectral clustering, we aim to identify clusters of nodes where most edges fall within clusters and only few edges fall between clusters. This task is important for many downstream applications and exploratory analysis. A core step of spectral clustering is performing an eigendecomposition of the corresponding graph Laplacian matrix (or equivalently, a singular value decomposition, SVD, of the incidence matrix). The convergence of iterative singular value decomposition approaches depends on the eigengaps of the spectrum of the given matrix, i.e., the difference between consecutive eigenvalues. For a graph Laplacian corresponding to a well-clustered graph, the eigenvalues will be non-negative but very small (much less than $1$) slowing convergence. This paper introduces a parallelizable approach to dilating the spectrum in order to accelerate SVD solvers and in turn, spectral clustering. This is accomplished via polynomial approximations to matrix operations that favorably transform the spectrum of a matrix without changing its eigenvectors. Experiments demonstrate that this approach significantly accelerates convergence, and we explain how this transformation can be parallelized and stochastically approximated to scale with available compute.
△ Less
Submitted 29 July, 2022;
originally announced July 2022.
-
Maximum Class Separation as Inductive Bias in One Matrix
Authors:
Tejaswi Kasarla,
Gertjan J. Burghouts,
Max van Spengler,
Elise van der Pol,
Rita Cucchiara,
Pascal Mettes
Abstract:
Maximizing the separation between classes constitutes a well-known inductive bias in machine learning and a pillar of many traditional algorithms. By default, deep networks are not equipped with this inductive bias and therefore many alternative solutions have been proposed through differential optimization. Current approaches tend to optimize classification and separation jointly: aligning inputs…
▽ More
Maximizing the separation between classes constitutes a well-known inductive bias in machine learning and a pillar of many traditional algorithms. By default, deep networks are not equipped with this inductive bias and therefore many alternative solutions have been proposed through differential optimization. Current approaches tend to optimize classification and separation jointly: aligning inputs with class vectors and separating class vectors angularly. This paper proposes a simple alternative: encoding maximum separation as an inductive bias in the network by adding one fixed matrix multiplication before computing the softmax activations. The main observation behind our approach is that separation does not require optimization but can be solved in closed-form prior to training and plugged into a network. We outline a recursive approach to obtain the matrix consisting of maximally separable vectors for any number of classes, which can be added with negligible engineering effort and computational overhead. Despite its simple nature, this one matrix multiplication provides real impact. We show that our proposal directly boosts classification, long-tailed recognition, out-of-distribution detection, and open-set recognition, from CIFAR to ImageNet. We find empirically that maximum separation works best as a fixed bias; making the matrix learnable adds nothing to the performance. The closed-form implementation and code to reproduce the experiments are available on github.
△ Less
Submitted 22 October, 2022; v1 submitted 17 June, 2022;
originally announced June 2022.
-
Multi-Agent MDP Homomorphic Networks
Authors:
Elise van der Pol,
Herke van Hoof,
Frans A. Oliehoek,
Max Welling
Abstract:
This paper introduces Multi-Agent MDP Homomorphic Networks, a class of networks that allows distributed execution using only local information, yet is able to share experience between global symmetries in the joint state-action space of cooperative multi-agent systems. In cooperative multi-agent systems, complex symmetries arise between different configurations of the agents and their local observ…
▽ More
This paper introduces Multi-Agent MDP Homomorphic Networks, a class of networks that allows distributed execution using only local information, yet is able to share experience between global symmetries in the joint state-action space of cooperative multi-agent systems. In cooperative multi-agent systems, complex symmetries arise between different configurations of the agents and their local observations. For example, consider a group of agents navigating: rotating the state globally results in a permutation of the optimal joint policy. Existing work on symmetries in single agent reinforcement learning can only be generalized to the fully centralized setting, because such approaches rely on the global symmetry in the full state-action spaces, and these can result in correspondences across agents. To encode such symmetries while still allowing distributed execution we propose a factorization that decomposes global symmetries into local transformations. Our proposed factorization allows for distributing the computation that enforces global symmetries over local agents and local interactions. We introduce a multi-agent equivariant policy network based on this factorization. We show empirically on symmetric multi-agent problems that globally symmetric distributable policies improve data efficiency compared to non-equivariant baselines.
△ Less
Submitted 29 April, 2022; v1 submitted 9 October, 2021;
originally announced October 2021.
-
Geometric and Physical Quantities Improve E(3) Equivariant Message Passing
Authors:
Johannes Brandstetter,
Rob Hesselink,
Elise van der Pol,
Erik J Bekkers,
Max Welling
Abstract:
Including covariant information, such as position, force, velocity or spin is important in many tasks in computational physics and chemistry. We introduce Steerable E(3) Equivariant Graph Neural Networks (SEGNNs) that generalise equivariant graph networks, such that node and edge attributes are not restricted to invariant scalars, but can contain covariant information, such as vectors or tensors.…
▽ More
Including covariant information, such as position, force, velocity or spin is important in many tasks in computational physics and chemistry. We introduce Steerable E(3) Equivariant Graph Neural Networks (SEGNNs) that generalise equivariant graph networks, such that node and edge attributes are not restricted to invariant scalars, but can contain covariant information, such as vectors or tensors. This model, composed of steerable MLPs, is able to incorporate geometric and physical information in both the message and update functions. Through the definition of steerable node attributes, the MLPs provide a new class of activation functions for general use with steerable feature fields. We discuss ours and related work through the lens of equivariant non-linear convolutions, which further allows us to pin-point the successful components of SEGNNs: non-linear message aggregation improves upon classic linear (steerable) point convolutions; steerable messages improve upon recent equivariant graph networks that send invariant messages. We demonstrate the effectiveness of our method on several tasks in computational physics and chemistry and provide extensive ablation studies.
△ Less
Submitted 26 March, 2022; v1 submitted 6 October, 2021;
originally announced October 2021.
-
The Impact of Negative Sampling on Contrastive Structured World Models
Authors:
Ondrej Biza,
Elise van der Pol,
Thomas Kipf
Abstract:
World models trained by contrastive learning are a compelling alternative to autoencoder-based world models, which learn by reconstructing pixel states. In this paper, we describe three cases where small changes in how we sample negative states in the contrastive loss lead to drastic changes in model performance. In previously studied Atari datasets, we show that leveraging time step correlations…
▽ More
World models trained by contrastive learning are a compelling alternative to autoencoder-based world models, which learn by reconstructing pixel states. In this paper, we describe three cases where small changes in how we sample negative states in the contrastive loss lead to drastic changes in model performance. In previously studied Atari datasets, we show that leveraging time step correlations can double the performance of the Contrastive Structured World Model. We also collect a full version of the datasets to study contrastive learning under a more diverse set of experiences.
△ Less
Submitted 24 July, 2021;
originally announced July 2021.
-
MDP Homomorphic Networks: Group Symmetries in Reinforcement Learning
Authors:
Elise van der Pol,
Daniel E. Worrall,
Herke van Hoof,
Frans A. Oliehoek,
Max Welling
Abstract:
This paper introduces MDP homomorphic networks for deep reinforcement learning. MDP homomorphic networks are neural networks that are equivariant under symmetries in the joint state-action space of an MDP. Current approaches to deep reinforcement learning do not usually exploit knowledge about such structure. By building this prior knowledge into policy and value networks using an equivariance con…
▽ More
This paper introduces MDP homomorphic networks for deep reinforcement learning. MDP homomorphic networks are neural networks that are equivariant under symmetries in the joint state-action space of an MDP. Current approaches to deep reinforcement learning do not usually exploit knowledge about such structure. By building this prior knowledge into policy and value networks using an equivariance constraint, we can reduce the size of the solution space. We specifically focus on group-structured symmetries (invertible transformations). Additionally, we introduce an easy method for constructing equivariant network layers numerically, so the system designer need not solve the constraints by hand, as is typically done. We construct MDP homomorphic MLPs and CNNs that are equivariant under either a group of reflections or rotations. We show that such networks converge faster than unstructured baselines on CartPole, a grid world and Pong.
△ Less
Submitted 20 January, 2021; v1 submitted 30 June, 2020;
originally announced June 2020.
-
Towards defining reference materials for extracellular vesicle size, concentration, refractive index and epitope abundance
Authors:
Joshua A. Welsh,
Edwin van der Pol,
Britta A. Bettin,
David R. F. Carter,
An Hendrix,
Metka Lenassi,
Marc-André Langlois,
Alicia Llorente,
Arthur S. van de Nes,
Rienk Nieuwland,
Vera Tang,
Lili Wang,
Kenneth W. Witwer,
Jennifer C. Jones
Abstract:
Accurate characterization of extracellular vesicles (EVs) is critical to explore their diagnostic and therapeutic applications. As the EV research field has developed, so too have the techniques used to characterize them. The development of reference materials is required for the standardization of these techniques. This work, initiated from the ISEV 2017 Biomarker Workshop in Birmingham, UK, and…
▽ More
Accurate characterization of extracellular vesicles (EVs) is critical to explore their diagnostic and therapeutic applications. As the EV research field has developed, so too have the techniques used to characterize them. The development of reference materials is required for the standardization of these techniques. This work, initiated from the ISEV 2017 Biomarker Workshop in Birmingham, UK, and with further discussion during the ISEV 2019 Standardization Workshop in Ghent, Belgium, sets out to elucidate which reference materials are required and which are currently available to standardize commonly used analysis platforms for characterizing EV size, concentration, refractive index, and epitope expression. Due to their predominant use, a particular focus is placed on the optical methods nanoparticle tracking analysis and flow cytometry.
△ Less
Submitted 20 April, 2020;
originally announced April 2020.
-
Plannable Approximations to MDP Homomorphisms: Equivariance under Actions
Authors:
Elise van der Pol,
Thomas Kipf,
Frans A. Oliehoek,
Max Welling
Abstract:
This work exploits action equivariance for representation learning in reinforcement learning. Equivariance under actions states that transitions in the input space are mirrored by equivalent transitions in latent space, while the map and transition functions should also commute. We introduce a contrastive loss function that enforces action equivariance on the learned representations. We prove that…
▽ More
This work exploits action equivariance for representation learning in reinforcement learning. Equivariance under actions states that transitions in the input space are mirrored by equivalent transitions in latent space, while the map and transition functions should also commute. We introduce a contrastive loss function that enforces action equivariance on the learned representations. We prove that when our loss is zero, we have a homomorphism of a deterministic Markov Decision Process (MDP). Learning equivariant maps leads to structured latent spaces, allowing us to build a model on which we plan through value iteration. We show experimentally that for deterministic MDPs, the optimal policy in the abstract MDP can be successfully lifted to the original MDP. Moreover, the approach easily adapts to changes in the goal states. Empirically, we show that in such MDPs, we obtain better representations in fewer epochs compared to representation learning approaches using reconstructions, while generalizing better to new goals than model-free approaches.
△ Less
Submitted 27 February, 2020;
originally announced February 2020.
-
Contrastive Learning of Structured World Models
Authors:
Thomas Kipf,
Elise van der Pol,
Max Welling
Abstract:
A structured understanding of our world in terms of objects, relations, and hierarchies is an important component of human cognition. Learning such a structured world model from raw sensory data remains a challenge. As a step towards this goal, we introduce Contrastively-trained Structured World Models (C-SWMs). C-SWMs utilize a contrastive approach for representation learning in environments with…
▽ More
A structured understanding of our world in terms of objects, relations, and hierarchies is an important component of human cognition. Learning such a structured world model from raw sensory data remains a challenge. As a step towards this goal, we introduce Contrastively-trained Structured World Models (C-SWMs). C-SWMs utilize a contrastive approach for representation learning in environments with compositional structure. We structure each state embedding as a set of object representations and their relations, modeled by a graph neural network. This allows objects to be discovered from raw pixel observations without direct supervision as part of the learning process. We evaluate C-SWMs on compositional environments involving multiple interacting objects that can be manipulated independently by an agent, simple Atari games, and a multi-object physics simulation. Our experiments demonstrate that C-SWMs can overcome limitations of models based on pixel reconstruction and outperform typical representatives of this model class in highly structured environments, while learning interpretable object-based representations.
△ Less
Submitted 5 January, 2020; v1 submitted 27 November, 2019;
originally announced November 2019.
-
Visual Rationalizations in Deep Reinforcement Learning for Atari Games
Authors:
Laurens Weitkamp,
Elise van der Pol,
Zeynep Akata
Abstract:
Due to the capability of deep learning to perform well in high dimensional problems, deep reinforcement learning agents perform well in challenging tasks such as Atari 2600 games. However, clearly explaining why a certain action is taken by the agent can be as important as the decision itself. Deep reinforcement learning models, as other deep learning models, tend to be opaque in their decision-ma…
▽ More
Due to the capability of deep learning to perform well in high dimensional problems, deep reinforcement learning agents perform well in challenging tasks such as Atari 2600 games. However, clearly explaining why a certain action is taken by the agent can be as important as the decision itself. Deep reinforcement learning models, as other deep learning models, tend to be opaque in their decision-making process. In this work, we propose to make deep reinforcement learning more transparent by visualizing the evidence on which the agent bases its decision. In this work, we emphasize the importance of producing a justification for an observed action, which could be applied to a black-box decision agent.
△ Less
Submitted 1 February, 2019;
originally announced February 2019.
-
Hyperspherical Prototype Networks
Authors:
Pascal Mettes,
Elise van der Pol,
Cees G. M. Snoek
Abstract:
This paper introduces hyperspherical prototype networks, which unify classification and regression with prototypes on hyperspherical output spaces. For classification, a common approach is to define prototypes as the mean output vector over training examples per class. Here, we propose to use hyperspheres as output spaces, with class prototypes defined a priori with large margin separation. We pos…
▽ More
This paper introduces hyperspherical prototype networks, which unify classification and regression with prototypes on hyperspherical output spaces. For classification, a common approach is to define prototypes as the mean output vector over training examples per class. Here, we propose to use hyperspheres as output spaces, with class prototypes defined a priori with large margin separation. We position prototypes through data-independent optimization, with an extension to incorporate priors from class semantics. By doing so, we do not require any prototype updating, we can handle any training size, and the output dimensionality is no longer constrained to the number of classes. Furthermore, we generalize to regression, by optimizing outputs as an interpolation between two prototypes on the hypersphere. Since both tasks are now defined by the same loss function, they can be jointly trained for multi-task problems. Experimentally, we show the benefit of hyperspherical prototype networks for classification, regression, and their combination over other prototype methods, softmax cross-entropy, and mean squared error approaches.
△ Less
Submitted 25 October, 2019; v1 submitted 29 January, 2019;
originally announced January 2019.
-
Beyond Local Nash Equilibria for Adversarial Networks
Authors:
Frans A. Oliehoek,
Rahul Savani,
Jose Gallego,
Elise van der Pol,
Roderich Groß
Abstract:
Save for some special cases, current training methods for Generative Adversarial Networks (GANs) are at best guaranteed to converge to a `local Nash equilibrium` (LNE). Such LNEs, however, can be arbitrarily far from an actual Nash equilibrium (NE), which implies that there are no guarantees on the quality of the found generator or classifier. This paper proposes to model GANs explicitly as finite…
▽ More
Save for some special cases, current training methods for Generative Adversarial Networks (GANs) are at best guaranteed to converge to a `local Nash equilibrium` (LNE). Such LNEs, however, can be arbitrarily far from an actual Nash equilibrium (NE), which implies that there are no guarantees on the quality of the found generator or classifier. This paper proposes to model GANs explicitly as finite games in mixed strategies, thereby ensuring that every LNE is an NE. With this formulation, we propose a solution method that is proven to monotonically converge to a resource-bounded Nash equilibrium (RB-NE): by increasing computational resources we can find better solutions. We empirically demonstrate that our method is less prone to typical GAN problems such as mode collapse, and produces solutions that are less exploitable than those produced by GANs and MGANs, and closely resemble theoretical predictions about NEs.
△ Less
Submitted 26 July, 2018; v1 submitted 18 June, 2018;
originally announced June 2018.
-
Comparison of computational codes for direct numerical simulations of turbulent Rayleigh-Bénard convection
Authors:
Gijs L. Kooij,
Mikhail A. Botchev,
Edo M. A. Frederix,
Bernard J. Geurts,
Susanne Horn,
Detlef Lohse,
Erwin P. van der Poel,
Olga Shishkina,
Richard J. A. M. Stevens,
Roberto Verzicco
Abstract:
Computational codes for direct numerical simulations of Rayleigh-Bénard (RB) convection are compared in terms of computational cost and quality of the solution. As a benchmark case, RB convection at $Ra=10^8$ and $Pr=1$ in a periodic domain, in cubic and cylindrical containers is considered. A dedicated second-order finite-difference code (AFID/RBflow) and a specialized fourth-order finite-volume…
▽ More
Computational codes for direct numerical simulations of Rayleigh-Bénard (RB) convection are compared in terms of computational cost and quality of the solution. As a benchmark case, RB convection at $Ra=10^8$ and $Pr=1$ in a periodic domain, in cubic and cylindrical containers is considered. A dedicated second-order finite-difference code (AFID/RBflow) and a specialized fourth-order finite-volume code (Goldfish) are compared with a general purpose finite-volume approach (OpenFOAM) and a general purpose spectral-element code (Nek5000). Reassuringly, all codes provide predictions of the average heat transfer that converge to the same values. The computational costs, however, are found to differ considerably. The specialized codes AFID/RBflow and Goldfish are found to excel in efficiency, outperforming the general purpose flow solvers Nek5000 and OpenFOAM by an order of magnitude with an error on the Nusselt number $Nu$ below $5\%$. However, we find that $Nu$ alone is not sufficient to assess the quality of the numerical results: in fact, instantaneous snapshots of the temperature field from a near wall region obtained for deliberately under-resolved simulations using Nek5000 clearly indicate inadequate flow resolution even when $Nu$ is converged. Overall, dedicated special purpose codes for RB convection are found to be more efficient than general purpose codes.
△ Less
Submitted 25 February, 2018;
originally announced February 2018.
-
GANGs: Generative Adversarial Network Games
Authors:
Frans A. Oliehoek,
Rahul Savani,
Jose Gallego-Posada,
Elise van der Pol,
Edwin D. de Jong,
Roderich Gross
Abstract:
Generative Adversarial Networks (GAN) have become one of the most successful frameworks for unsupervised generative modeling. As GANs are difficult to train much research has focused on this. However, very little of this research has directly exploited game-theoretic techniques. We introduce Generative Adversarial Network Games (GANGs), which explicitly model a finite zero-sum game between a gener…
▽ More
Generative Adversarial Networks (GAN) have become one of the most successful frameworks for unsupervised generative modeling. As GANs are difficult to train much research has focused on this. However, very little of this research has directly exploited game-theoretic techniques. We introduce Generative Adversarial Network Games (GANGs), which explicitly model a finite zero-sum game between a generator ($G$) and classifier ($C$) that use mixed strategies. The size of these games precludes exact solution methods, therefore we define resource-bounded best responses (RBBRs), and a resource-bounded Nash Equilibrium (RB-NE) as a pair of mixed strategies such that neither $G$ or $C$ can find a better RBBR. The RB-NE solution concept is richer than the notion of `local Nash equilibria' in that it captures not only failures of esca** local optima of gradient descent, but applies to any approximate best response computations, including methods with random restarts. To validate our approach, we solve GANGs with the Parallel Nash Memory algorithm, which provably monotonically converges to an RB-NE. We compare our results to standard GAN setups, and demonstrate that our method deals well with typical GAN problems such as mode collapse, partial mode coverage and forgetting.
△ Less
Submitted 17 December, 2017; v1 submitted 2 December, 2017;
originally announced December 2017.
-
Mixed insulating and conducting thermal boundary conditions in Rayleigh-Bénard convection
Authors:
Dennis Bakhuis,
Rodolfo Ostilla-Mónico,
Erwin P. van der Poel,
Roberto Verzicco,
Detlef Lohse
Abstract:
A series of direct numerical simulations of Rayleigh-Bénard convection, the flow in a fluid layer heated from below and cooled from above, were conducted to investigate the effect of mixed insulating and conducting boundary conditions on convective flows. Rayleigh numbers between $\text{Ra}=10^7$ and $\text{Ra}=10^9$ were considered, for Prandtl numbers $\text{Pr}=1$ and $\text{Pr}=10$. The bottom…
▽ More
A series of direct numerical simulations of Rayleigh-Bénard convection, the flow in a fluid layer heated from below and cooled from above, were conducted to investigate the effect of mixed insulating and conducting boundary conditions on convective flows. Rayleigh numbers between $\text{Ra}=10^7$ and $\text{Ra}=10^9$ were considered, for Prandtl numbers $\text{Pr}=1$ and $\text{Pr}=10$. The bottom plate was divided into patterns of conducting and insulating stripes. The size ratio between these stripes was fixed to unity and the total number of stripes was varied. Global quantities such as the heat transport and average bulk temperature and local quantities such as the temperature just below the insulating boundary wall were investigated. For the case with the top boundary divided into two halves, one conducting and one insulating, the heat transfer was found to be approximately two thirds of the fully conducting case. Increasing the pattern frequency increased the heat transfer which asymptotically approached the fully conducting case, even if only half of the surface is conducting. Fourier analysis of the temperature field revealed that the imprinted pattern of the plates is diffused in the thermal boundary layers, and cannot be detected in the bulk. With conducting-insulating patterns on both plates, the trends previously described were similar, however, the half-and-half division led to a heat transfer of about a half of the fully conducting case instead of two-thirds. The effect of the ratio of conducting and insulating areas was also analyzed, and it was found that even for systems with a top plate with only $25\%$ conducting surface, heat-transport of $60\%$ of the fully conducting case can be seen. Changing the 1D stripe pattern to 2D checkerboard tessellations does not result in a significantly different response of the system.
△ Less
Submitted 9 October, 2017; v1 submitted 22 February, 2017;
originally announced February 2017.
-
Translational and rotational dynamics of a large buoyant sphere in turbulence
Authors:
Varghese Mathai,
Matthijs W. M. Neut,
Erwin P. van der Poel,
Chao Sun
Abstract:
We report experimental measurements of the translational and rotational dynamics of a large buoyant sphere in isotropic turbulence. We introduce an efficient method to simultaneously determine the position and (absolute) orientation of a spherical body from visual observation. The method employs a minimization algorithm to obtain the orientation from the 2D projection of a specific pattern drawn o…
▽ More
We report experimental measurements of the translational and rotational dynamics of a large buoyant sphere in isotropic turbulence. We introduce an efficient method to simultaneously determine the position and (absolute) orientation of a spherical body from visual observation. The method employs a minimization algorithm to obtain the orientation from the 2D projection of a specific pattern drawn onto the surface of the sphere. This has the advantages that it does not require a database of reference images, is easily scalable using parallel processing, and enables accurate absolute orientation reference. Analysis of the sphere's translational dynamics reveals clear differences between the streamwise and transverse directions. The translational auto-correlations and PDFs provide evidence for periodicity in the particle's dynamics even under turbulent conditions. The angular autocorrelations show weak periodicity. The angular accelerations exhibit wide tails, however without a directional dependence.
△ Less
Submitted 8 March, 2016;
originally announced March 2016.
-
Penetrative internally heated convection in two and three dimensions
Authors:
David Goluskin,
Erwin P. van der Poel
Abstract:
Convection of an internally heated fluid, confined between top and bottom plates of equal temperature, is studied by direct numerical simulation in two and three dimensions. The unstably stratified upper region drives convection that penetrates into the stably stratified lower region. The fraction of produced heat esca** across the bottom plate, which is one half without convection, initially de…
▽ More
Convection of an internally heated fluid, confined between top and bottom plates of equal temperature, is studied by direct numerical simulation in two and three dimensions. The unstably stratified upper region drives convection that penetrates into the stably stratified lower region. The fraction of produced heat esca** across the bottom plate, which is one half without convection, initially decreases as convection strengthens. Entering the turbulent regime, this decrease reverses in two dimensions but continues monotonically in three dimensions. The mean fluid temperature, which grows proportionally to the heating rate ($H$) without convection, grows proportionally to $H^{4/5}$ when convection is strong in both two and three dimensions. The ratio of the heating rate to the fluid temperature is likened to the Nusselt number of Rayleigh-Bénard convection. Simulations are reported for Prandtl numbers between 0.1 and 10 and for Rayleigh numbers (defined in terms of the heating rate) up to $5\times10^{10}$.
△ Less
Submitted 21 January, 2016; v1 submitted 18 November, 2015;
originally announced November 2015.
-
Salinity transfer in bounded double diffusive convection
Authors:
Yantao Yang,
Erwin P. van der Poel,
Rodolfo Ostilla-Mónico,
Chao Sun,
Roberto Verzicco,
Siegfried Grossmann,
Detlef Lohse
Abstract:
The double diffusive convection between two parallel plates is numerically studied for a series of parameters. The flow is driven by the salinity difference and stabilized by the thermal field. Our simulations are directly compared to experiments by Hage and Tilgner (\emph{Phys. Fluids} 22, 076603 (2010)) for several sets of parameters and reasonable agreement is found. This in particular holds fo…
▽ More
The double diffusive convection between two parallel plates is numerically studied for a series of parameters. The flow is driven by the salinity difference and stabilized by the thermal field. Our simulations are directly compared to experiments by Hage and Tilgner (\emph{Phys. Fluids} 22, 076603 (2010)) for several sets of parameters and reasonable agreement is found. This in particular holds for the salinity flux and its dependence on the salinity Rayleigh number. Salt fingers are present in all simulations and extend through the entire height. The thermal Rayleigh number seems to have minor influence on salinity flux but affects the Reynolds number and the morphology of the flow. Next to the numerical calculation, we apply the Grossmann-Lohse theory for Rayleigh-Bénard flow to the current problem without introducing any new coefficients. The theory successfully predicts the salinity flux both with respect to the scaling and even with respect to the absolute value for the numerical and experimental results.
△ Less
Submitted 6 October, 2015;
originally announced October 2015.
-
Logarithmic mean temperature profiles and their connection to plume emissions in turbulent Rayleigh-Bénard convection
Authors:
Erwin P. van der Poel,
Rodolfo Ostilla-Mónico,
Roberto Verzicco,
Siegfried Grossmann,
Detlef Lohse
Abstract:
Two-dimensional simulations of Rayleigh-Bénard convection at $Ra = 5\times10^{10}$ show that vertical logarithmic mean temperature profiles can be observed in regions of the boundary layer where thermal plumes are emitted. The profile is logarithmic only in these regions and not in the rest of the boundary layer where it is sheared by the large scale wind and impacted by plumes. In addition, the l…
▽ More
Two-dimensional simulations of Rayleigh-Bénard convection at $Ra = 5\times10^{10}$ show that vertical logarithmic mean temperature profiles can be observed in regions of the boundary layer where thermal plumes are emitted. The profile is logarithmic only in these regions and not in the rest of the boundary layer where it is sheared by the large scale wind and impacted by plumes. In addition, the logarithmic behavior is not visible in the horizontal average. The findings reveal that the temperature profiles are strongly connected to thermal plume emission and support a perception that parts of the boundary layer can be turbulent, while others are not. The transition to the ultimate regime, in which the boundary layers are considered to be fully turbulent, can therefore be understood as a gradual increases in fraction of the plume-emitting ('turbulent') regions of the boundary layer.
△ Less
Submitted 6 October, 2015;
originally announced October 2015.
-
A multiple--resolution strategy for Direct Numerical Simulation of scalar turbulence
Authors:
Rodolfo Ostilla-Mónico,
Yantao Yang,
Erwin P. van der Poel,
Detlef Lohse,
Roberto Verzicco
Abstract:
In this paper a numerical procedure to simulate low diffusivity scalar turbulence is presented. The method consists of using a grid for the advected scalar with a higher spatial resolutions than that of the momentum. The latter usually requires a less refined mesh and integrating both fields on a single grid tailored to the most demanding variable, produces an unnecessary computational overhead. A…
▽ More
In this paper a numerical procedure to simulate low diffusivity scalar turbulence is presented. The method consists of using a grid for the advected scalar with a higher spatial resolutions than that of the momentum. The latter usually requires a less refined mesh and integrating both fields on a single grid tailored to the most demanding variable, produces an unnecessary computational overhead. A multiple resolution approach is used also in the time integration in order to maintain the stability of the scalars on the finer grid. The method is the more advantageous the less diffusive the scalar is with respect to momentum, therefore it is particularly well suited for large Prandtl or Schmidt number flows. However, even in the case of equal diffusivities the present procedure gives CPU time and memory occupation savings. The reason is that the absence of the pressure term in the scalar equation leads to much steeper gradients in the scalar field as compared to the velocity field.
△ Less
Submitted 6 February, 2015;
originally announced February 2015.
-
The effect of velocity boundary conditions on the heat transfer and flow topology in two-dimensional Rayleigh-Bénard convection
Authors:
Erwin P. van der Poel,
Rodolfo Ostilla Mónico,
Roberto Verzicco,
Detlef Lohse
Abstract:
The effect of various velocity boundary condition is studied in two-dimensional Rayleigh-Bénard convection. Combinations of no-slip, stress-free and periodic boundary conditions are used on both the sidewalls and the horizontal plates. For the studied Rayleigh numbers Ra between $10^8$ and $10^{11}$ the heat transport is lower for $Γ= 0.33$ than for $Γ= 1$ in case of no-slip sidewalls. This is sur…
▽ More
The effect of various velocity boundary condition is studied in two-dimensional Rayleigh-Bénard convection. Combinations of no-slip, stress-free and periodic boundary conditions are used on both the sidewalls and the horizontal plates. For the studied Rayleigh numbers Ra between $10^8$ and $10^{11}$ the heat transport is lower for $Γ= 0.33$ than for $Γ= 1$ in case of no-slip sidewalls. This is surprisingly opposite for stress-free sidewalls, where the heat transport increases for lower aspect-ratio. In wider cells the aspect-ratio dependence is observed to disappear for $\text{Ra} \ge 10^{10}$. Two distinct flow types with very different dynamics can be seen, mostly dependent on the plate velocity boundary condition, namely roll-like flow and horizontal zonal flow, which have a substantial effect on the dynamics and heat transport in the system. The predominantly horizontal zonal flow suppresses heat flux and is observed for stress-free and asymmetric plates. Low aspect-ratio periodic sidewall simulations with a no-slip boundary condition on the plates also exhibit zonal flow. In all the other cases, the flow is roll-like. In two-dimensional Rayleigh-Bénard convection, the velocity boundary conditions thus have large implications on both roll-like and zonal flow that have to be taken into consideration before the boundary conditions are imposed.
△ Less
Submitted 8 January, 2015;
originally announced January 2015.
-
Comparison between two and three dimensional Rayleigh-Bénard convection
Authors:
Erwin P. van der Poel,
Richard J. A. M. Stevens,
Detlef Lohse
Abstract:
Two dimensional (2D) and three dimensional (3D) Rayleigh-Bénard convection is compared using results from direct numerical simulations and prior experiments. The explored phase diagrams for both cases are reviewed. The differences and similarities between 2D and 3D are studied using Nu(Ra) for Pr = 4.38 and Pr = 0.7 and Nu(Pr) for Ra up to $10^8$. In the Nu(Ra) scaling at higher Pr, 2D and 3D are…
▽ More
Two dimensional (2D) and three dimensional (3D) Rayleigh-Bénard convection is compared using results from direct numerical simulations and prior experiments. The explored phase diagrams for both cases are reviewed. The differences and similarities between 2D and 3D are studied using Nu(Ra) for Pr = 4.38 and Pr = 0.7 and Nu(Pr) for Ra up to $10^8$. In the Nu(Ra) scaling at higher Pr, 2D and 3D are very similar; differing only by a constant factor up to $\text{Ra} = 10^{10}$. In contrast, the difference is large at lower Pr, due to the strong roll state dependence of Nu in 2D. The behaviour of Nu(Pr) is similar in 2D and 3D at large Pr. However, it differs significantly around Pr = 1. The Reynolds number values are consistently higher in 2D and additionally converge at large Pr. Finally, the thermal boundary layer profiles are compared in 2D and 3D.
△ Less
Submitted 8 January, 2015;
originally announced January 2015.
-
A pencil distributed finite difference code for strongly turbulent wall-bounded flows
Authors:
Erwin P. van der Poel,
Rodolfo Ostilla Mónico,
John Donners,
Roberto Verzicco
Abstract:
We present a numerical scheme geared for high performance computation of wall-bounded turbulent flows. The number of all-to-all communications is decreased to only six instances by using a two-dimensional (pencil) domain decomposition and utilizing the favourable scaling of the CFL time-step constraint as compared to the diffusive time-step constraint. As the CFL condition is more restrictive at h…
▽ More
We present a numerical scheme geared for high performance computation of wall-bounded turbulent flows. The number of all-to-all communications is decreased to only six instances by using a two-dimensional (pencil) domain decomposition and utilizing the favourable scaling of the CFL time-step constraint as compared to the diffusive time-step constraint. As the CFL condition is more restrictive at high driving, implicit time integration of the viscous terms in the wall-parallel directions is no longer required. This avoids the communication of non-local information to a process for the computation of implicit derivatives in these directions. We explain in detail the numerical scheme used for the integration of the equations, and the underlying parallelization. The code is shown to have very good strong and weak scaling to at least 64K cores.
△ Less
Submitted 6 January, 2015;
originally announced January 2015.
-
Geostrophic convective turbulence: The effect of boundary layers
Authors:
Rudie P. J. Kunnen,
Rodolfo Ostilla-Mónico,
Erwin P. van der Poel,
Roberto Verzicco,
Detlef Lohse
Abstract:
Rayleigh--Bénard (RB) convection, the flow in a fluid layer heated from below and cooled from above, is used to analyze the transition to the geostrophic regime of thermal convection. In the geostrophic regime, which is of direct relevance to most geo- and astrophysical flows, the system is strongly rotated while maintaining a sufficiently large thermal driving to generate turbulence. We directly…
▽ More
Rayleigh--Bénard (RB) convection, the flow in a fluid layer heated from below and cooled from above, is used to analyze the transition to the geostrophic regime of thermal convection. In the geostrophic regime, which is of direct relevance to most geo- and astrophysical flows, the system is strongly rotated while maintaining a sufficiently large thermal driving to generate turbulence. We directly simulate the Navier--Stokes equations for two values of the thermal forcing, i.e. $Ra=10^{10}$ and $Ra=5\cdot10^{10}$, a constant Prandtl number~$Pr=1$, and vary the Ekman number in the range $Ek=1.3\cdot10^{-7}$ to $Ek=2\cdot10^{-6}$ which satisfies both requirements of super-criticality and strong rotation. We focus on the differences between the application of no-slip vs. stress-free boundary conditions on the horizontal plates. The transition is found at roughly the same parameter values for both boundary conditions, i.e. at~$Ek\approx 9\times 10^{-7}$ for~$Ra=1\times 10^{10}$ and at~$Ek\approx 3\times 10^{-7}$ for~$Ra=5\times 10^{10}$. However, the transition is gradual and it does not exactly coincide in~$Ek$ for different flow indicators. In particular, we report the characteristics of the transitions in the heat transfer scaling laws, the boundary-layer thicknesses, the bulk/boundary-layer distribution of dissipations and the mean temperature gradient in the bulk. The flow phenomenology in the geostrophic regime evolves differently for no-slip and stress-free plates. For stress-free conditions the formation of a large-scale barotropic vortex with associated inverse energy cascade is apparent. For no-slip plates, a turbulent state without large-scale coherent structures is found; the absence of large-scale structure formation is reflected in the energy transfer in the sense that the inverse cascade, present for stress-free boundary conditions, vanishes.
△ Less
Submitted 1 February, 2016; v1 submitted 23 September, 2014;
originally announced September 2014.
-
Exploring the phase diagram of fully turbulent Taylor-Couette flow
Authors:
Rodolfo Ostilla Mónico,
Erwin P. van der Poel,
Roberto Verzicco,
Siegfried Grossmann,
Detlef Lohse
Abstract:
Direct numerical simulations of Taylor-Couette flow (TC). Shear Reynolds numbers of up to $3\cdot10^5$, corresponding to Taylor numbers of $Ta=4.6\cdot10^{10}$, were reached. Effective scaling laws for the torque are presented. The transition to the ultimate regime, in which asymptotic scaling laws (with logarithmic corrections) for the torque are expected to hold up to arbitrarily high driving, i…
▽ More
Direct numerical simulations of Taylor-Couette flow (TC). Shear Reynolds numbers of up to $3\cdot10^5$, corresponding to Taylor numbers of $Ta=4.6\cdot10^{10}$, were reached. Effective scaling laws for the torque are presented. The transition to the ultimate regime, in which asymptotic scaling laws (with logarithmic corrections) for the torque are expected to hold up to arbitrarily high driving, is analysed for different radius ratios $η$, different aspect ratios $Γ$ and different rotation ratios $Ro$. It is shown that the transition is approximately independent of $Ro$ and $Γ$, but depends significantly on $η$. We furthermore calculate the local angular velocity profiles and visualize different flow regimes that depend both on the shearing of the flow, and the Coriolis force originating from the outer cylinder rotation. Two main regimes are distinguished, based on the magnitude of the Coriolis force, namely the co-rotating and weakly counter-rotating regime dominated by Rayleigh-unstable regions, and the strongly counter-rotating regime where a mixture of stable and unstable regions exist. Furthermore, an analogy between $η$ and outer-cylinder rotation is revealed, namely that smaller gaps behave like a wider gap with co-rotating cylinders, and that wider gaps behave like smaller gaps with weakly counter-rotating cylinders. Finally, the effect of $Γ$ on the effective torque versus $Ta$ scaling is analysed and it is shown that different branches of the torque-versus-$Ta$ relationships associated to different aspect ratios are found to cross within $15%$ of the $Re$ associated to the transition to the ultimate regime. The paper culminates in phase diagram in the inner vs outer $Re$ number parameter space and in the $Ta$ vs $Ro$ parameter space, which can be seen as the extension of the Andereck \emph{et al.} phase diagram towards the ultimate regime.
△ Less
Submitted 15 October, 2014; v1 submitted 1 May, 2014;
originally announced May 2014.
-
Boundary layer dynamics at the transition between the classical and the ultimate regime of Taylor-Couette flow
Authors:
Rodolfo Ostilla Monico,
Erwin P. van der Poel,
Roberto Verzicco,
Siegfried Grossmann,
Detlef Lohse
Abstract:
Direct numerical simulations of turbulent Taylor-Couette flow are performed up to inner cylinder Reynolds numbers of {Re_i=10^5} for a radius ratio of {η=r_i/r_o=0.714} between the inner and outer cylinder. With increasing {Re_i}, the flow undergoes transitions between three different regimes: (i) a flow dominated by large coherent structures, (ii) an intermediate transitional regime, and (iii) a…
▽ More
Direct numerical simulations of turbulent Taylor-Couette flow are performed up to inner cylinder Reynolds numbers of {Re_i=10^5} for a radius ratio of {η=r_i/r_o=0.714} between the inner and outer cylinder. With increasing {Re_i}, the flow undergoes transitions between three different regimes: (i) a flow dominated by large coherent structures, (ii) an intermediate transitional regime, and (iii) a flow with developed turbulence. In the first regime the large--scale rolls completely drive the meridional flow while in the second one the coherent structures recover only on average. The presence of a mean flow allows for the coexistence of laminar and turbulent boundary layer dynamics. In the third regime the mean flow effects fade away and the flow becomes dominated by plumes. The effect of the local driving on the azimuthal and angular velocity profiles is quantified, in particular we show when and where those profiles develop.
△ Less
Submitted 29 October, 2013; v1 submitted 12 June, 2013;
originally announced June 2013.
-
The unifying theory of scaling in thermal convection: The updated prefactors
Authors:
Richard J. A. M. Stevens,
Erwin P. van der Poel,
Siegfried Grossmann,
Detlef Lohse
Abstract:
The unifying theory of scaling in thermal convection (Grossmann & Lohse (2000)) (henceforth the GL theory) suggests that there are no pure power laws for the Nusselt and Reynolds numbers as function of the Rayleigh and Prandtl numbers in the experimentally accessible parameter regime. In Grossmann & Lohse (2001) the dimensionless parameters of the theory were fitted to 155 experimental data points…
▽ More
The unifying theory of scaling in thermal convection (Grossmann & Lohse (2000)) (henceforth the GL theory) suggests that there are no pure power laws for the Nusselt and Reynolds numbers as function of the Rayleigh and Prandtl numbers in the experimentally accessible parameter regime. In Grossmann & Lohse (2001) the dimensionless parameters of the theory were fitted to 155 experimental data points by Ahlers & Xu (2001) in the regime $3\times 10^7 \le Ra \le 3 \times 10^{9}$ and $4\le Pr \le 34$ and Grossmann & Lohse (2002) used the experimental data point from Qiu & Tong (2001) and the fact that Nu(Ra,Pr) is independent of the parameter a, which relates the dimensionless kinetic boundary thickness with the square root of the wind Reynolds number, to fix the Reynolds number dependence. Meanwhile the theory is on one hand well confirmed through various new experiments and numerical simulations. On the other hand these new data points provide the basis for an updated fit in a much larger parameter space. Here we pick four well established (and sufficiently distant) Nu(Ra,Pr) data points and show that the resulting Nu(Ra,Pr) function is in agreement with almost all established experimental and numerical data up to the ultimate regime of thermal convection, whose onset also follows from the theory. One extra Re(Ra,Pr) data point is used to fix Re(Ra,Pr). As Re can depend on the definition and the aspect ratio the transformation properties of the GL equations are discussed in order to show how the GL coefficients can easily be adapted to new Reynolds number data while kee** Nu(Ra,Pr) unchanged.
△ Less
Submitted 20 June, 2013; v1 submitted 29 January, 2013;
originally announced January 2013.
-
Flow states in two-dimensional Rayleigh-Bénard convection as a function of aspect-ratio and Rayleigh number
Authors:
Erwin P. van der Poel,
Richard J. A. M. Stevens,
Kazuyasu Sugiyama,
Detlef Lohse
Abstract:
In this numerical study on two-dimensional Rayleigh-Bénard convection we consider $10^7 \leq Ra \leq 10^{12}$ in aspect ratio $0.23 \leq Γ\leq 13$ samples. We focus on several cases. First we consider small aspect ratio cells, where at high Ra number we find a sharp transition from a low Ra number branch towards a high Ra number branch, due to changes in the flow structure. Subsequently, we show t…
▽ More
In this numerical study on two-dimensional Rayleigh-Bénard convection we consider $10^7 \leq Ra \leq 10^{12}$ in aspect ratio $0.23 \leq Γ\leq 13$ samples. We focus on several cases. First we consider small aspect ratio cells, where at high Ra number we find a sharp transition from a low Ra number branch towards a high Ra number branch, due to changes in the flow structure. Subsequently, we show that the influence of the aspect ratio on the heat transport decreases with increasing aspect ratio, although even at very large aspect ratio of $Γ\approx10$ variations up to 2.5% in the heat transport as a function of Γare observed. Finally, we observe long-lived transients up to at least $Ra=10^9$, as in certain aspect ratio cells we observe different flow states that are stable for thousands of turnover times.
△ Less
Submitted 3 July, 2012; v1 submitted 18 June, 2012;
originally announced June 2012.
-
Connecting flow structures and heat flux in turbulent Rayleigh-Bénard convection
Authors:
Erwin P. van der Poel,
Richard J. A. M. Stevens,
Detlef Lohse
Abstract:
The aspect ratio (Γ) dependence of the heat transfer (Nusselt number Nu in dimensionless form) in turbulent (two-dimensional) Rayleigh-Bénard convection is numerically studied in the regime $0.4 \le Γ\le 1.25$ for Rayleigh numbers $10^7 \le Ra \le Ra^{9}$ and Prandtl numbers Pr =0.7 (gas) and 4.3 (water). Nu (Γ) shows a very rich structure with sudden jumps and sharp transitions. We connect these…
▽ More
The aspect ratio (Γ) dependence of the heat transfer (Nusselt number Nu in dimensionless form) in turbulent (two-dimensional) Rayleigh-Bénard convection is numerically studied in the regime $0.4 \le Γ\le 1.25$ for Rayleigh numbers $10^7 \le Ra \le Ra^{9}$ and Prandtl numbers Pr =0.7 (gas) and 4.3 (water). Nu (Γ) shows a very rich structure with sudden jumps and sharp transitions. We connect these structures to the way the flow organizes itself in the sample and explain why the aspect ratio dependence of Nu is more pronounced for small Pr. Even for fixed Γdifferent turbulent states (with different resulting Nu) can exist, between which the flow can or cannot switch. In the latter case the heat transfer thus depends on the initial conditions.
△ Less
Submitted 30 September, 2011;
originally announced September 2011.
-
Optical characterization and selective addressing of the resonant modes of a micropillar cavity with a white light beam
Authors:
Georgios Ctistis,
Alex Hartsuiker,
Edwin van der Pol,
Julien Claudon,
Willem L. Vos,
Jean-Michel Gérard
Abstract:
We have performed white-light reflectivity measurements on GaAs/AlAs micropillar cavities with diameters ranging from 1 μm up to 20 μm. We are able to resolve the spatial field distribution of each cavity mode in real space by scanning a small-sized beam across the top facet of each micropillar. We spectrally resolve distinct transverse optical cavity modes in reflectivity. Using this procedure we…
▽ More
We have performed white-light reflectivity measurements on GaAs/AlAs micropillar cavities with diameters ranging from 1 μm up to 20 μm. We are able to resolve the spatial field distribution of each cavity mode in real space by scanning a small-sized beam across the top facet of each micropillar. We spectrally resolve distinct transverse optical cavity modes in reflectivity. Using this procedure we can selectively address a single mode in the multimode micropillar cavity. Calculations for the coupling efficiency of a small-diameter beam to each mode are in very good agreement with our reflectivity measurements.
△ Less
Submitted 10 November, 2010; v1 submitted 2 July, 2010;
originally announced July 2010.
-
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
Authors:
The ATLAS Collaboration,
G. Aad,
E. Abat,
B. Abbott,
J. Abdallah,
A. A. Abdelalim,
A. Abdesselam,
O. Abdinov,
B. Abi,
M. Abolins,
H. Abramowicz,
B. S. Acharya,
D. L. Adams,
T. N. Addy,
C. Adorisio,
P. Adragna,
T. Adye,
J. A. Aguilar-Saavedra,
M. Aharrouche,
S. P. Ahlen,
F. Ahles,
A. Ahmad,
H. Ahmed,
G. Aielli,
T. Akdogan
, et al. (2587 additional authors not shown)
Abstract:
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on…
▽ More
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.
△ Less
Submitted 14 August, 2009; v1 submitted 28 December, 2008;
originally announced January 2009.