-
Open-access microcavities: high stability without dedicated mechanical low-pass filter in closed-cycle cryostats
Authors:
M. Fisicaro,
M. J. Rost,
M. Witlox,
H. van der Meer,
W. Löffler
Abstract:
Open-access optical microcavities are Fabry-Perot type cavities consisting of two micrometer-size mirrors, separated by an air (or vacuum) gap typically of a few micrometers. Compared to integrated microcavities, this configuration is more flexible as the relative position of the two mirrors can be tuned, allowing to change on demand parameters such as cavity length and mode volume, and to select…
▽ More
Open-access optical microcavities are Fabry-Perot type cavities consisting of two micrometer-size mirrors, separated by an air (or vacuum) gap typically of a few micrometers. Compared to integrated microcavities, this configuration is more flexible as the relative position of the two mirrors can be tuned, allowing to change on demand parameters such as cavity length and mode volume, and to select specific transverse cavity modes. These advantages come at the expense of mechanical stability of the cavity itself, which is particularly relevant in noisy closed-cycle cryostats. Here we show an open-access optical microcavity based on scanning-probe microscope design principles. When operated at 4 K in a tabletop optical closed-cycle cryostat without any dedicated low-pass filter, we obtain stabilities of 5.7 and 10.6 pm rms in the quiet and full period of the cryocooler cycle, respectively. Our device has free-space optical access, essential for instance for full polarization control.
△ Less
Submitted 1 August, 2023;
originally announced August 2023.
-
Resonant two-laser spin-state spectroscopy of a negatively charged quantum dot-microcavity system with a cold permanent magnet
Authors:
P. Steindl,
T. van der Ent,
H. van der Meer,
J. A. Frey,
J. Norman,
J. E. Bowers,
D. Bouwmeester,
W. Löffler
Abstract:
A high-efficiency spin-photon interface is an essential piece of quantum hardware necessary for various quantum technologies. Self-assembled InGaAs quantum dots have excellent optical properties, if embedded into an optical micro-cavity they can show near-deterministic spin-photon entanglement and spin readout, but an external magnetic field is required to address the individual spin states, which…
▽ More
A high-efficiency spin-photon interface is an essential piece of quantum hardware necessary for various quantum technologies. Self-assembled InGaAs quantum dots have excellent optical properties, if embedded into an optical micro-cavity they can show near-deterministic spin-photon entanglement and spin readout, but an external magnetic field is required to address the individual spin states, which usually is done using a superconducting magnet. Here, we show a compact cryogenically compatible SmCo magnet design that delivers 475 mT in-plane Voigt geometry magnetic field at 5 K, which is suitable to lift the energy degeneracy of the electron spin states and trion transitions of a single InGaAs quantum dot. This quantum dot is embedded in a birefringent high-finesse optical micro-cavity which enables efficient collection of single photons emitted by the quantum dot. We demonstrate spin-state manipulation by addressing the trion transitions with a single and two laser fields. The experimental data agrees well to our model which covers single- and two-laser cross-polarized resonance fluorescence, Purcell enhancement in a birefringent cavity, and variation of the laser powers.
△ Less
Submitted 5 March, 2023;
originally announced March 2023.
-
Realignment-free cryogenic macroscopic optical cavity coupled to an optical fiber
Authors:
Vitaly Fedoseev,
Matteo Fisicaro,
Harmen van der Meer,
Wolfgang Löffler,
Dirk Bouwmeester
Abstract:
We present a cryogenic setup where an optical Fabry-Perot resonator is coupled to a single-mode optical fiber with coupling efficiency above 90% at mK temperatures without realignment during cooling down. The setup is prealigned at room temperature to compensate for the thermal contraction and change of the refractive index of the optical components during cooling down. The high coupling efficienc…
▽ More
We present a cryogenic setup where an optical Fabry-Perot resonator is coupled to a single-mode optical fiber with coupling efficiency above 90% at mK temperatures without realignment during cooling down. The setup is prealigned at room temperature to compensate for the thermal contraction and change of the refractive index of the optical components during cooling down. The high coupling efficiency is achieved by kee** the setup rotation-symmetric around the optical axis. The majority of the setup components are made of Invar (FeNi36) which minimizes the thermal contraction. High coupling efficiency is essential in quantum optomechanical experiments.
△ Less
Submitted 16 January, 2023;
originally announced January 2023.
-
Vibration isolation with high thermal conductance for a cryogen-free dilution refrigerator
Authors:
Martin de Wit,
Gesa Welker,
Kier Heeck,
Frank M. Buters,
Hedwig J. Eerkens,
Gert Koning,
Harmen van der Meer,
Dirk Bouwmeester,
Tjerk H. Oosterkamp
Abstract:
We present the design and implementation of a mechanical low-pass filter vibration isolation used to reduce the vibrational noise in a cryogen-free dilution refrigerator operated at 10 mK, intended for scanning probe techniques. We discuss the design guidelines necessary to meet the competing requirements of having a low mechanical stiffness in combination with a high thermal conductance. We demon…
▽ More
We present the design and implementation of a mechanical low-pass filter vibration isolation used to reduce the vibrational noise in a cryogen-free dilution refrigerator operated at 10 mK, intended for scanning probe techniques. We discuss the design guidelines necessary to meet the competing requirements of having a low mechanical stiffness in combination with a high thermal conductance. We demonstrate the effectiveness of our approach by measuring the vibrational noise levels of an ultrasoft mechanical resonator positioned above a SQUID. Starting from a cryostat base temperature of 8 mK, the vibration isolation can be cooled to 10.5 mK, with a cooling power of 113 $μ$W at 100 mK. We use the low vibrations and low temperature to demonstrate an effective cantilever temperature of less than 20 mK. This results in a force sensitivity of less than 500 zN/$\sqrt{\mathrm{Hz}}$, and an integrated frequency noise as low as 0.4 mHz in a 1 Hz measurement bandwidth.
△ Less
Submitted 16 October, 2018;
originally announced October 2018.
-
Strong Thermo-mechanical Squeezing in a far detuned Membrane-in-the-middle System
Authors:
Sameer Sonar,
Vitaly Fedoseev,
Matthew Weaver,
Fernando Luna,
Elger Vlieg,
Harmen van der Meer,
Dirk Bouwmeester,
Wolfgang Löffler
Abstract:
We demonstrate 8.5 dB thermal squeezing of a membrane oscillator using the dynamical backaction effect and electrostatic feedback in an optomechanical membrane-in-the-middle setup. We show that strong squeezing can be obtained even in the far detuning regime of a sideband-resolved system. By using the dielectrophoretic force of a metallic needle kept in close proximity to the membrane, we implemen…
▽ More
We demonstrate 8.5 dB thermal squeezing of a membrane oscillator using the dynamical backaction effect and electrostatic feedback in an optomechanical membrane-in-the-middle setup. We show that strong squeezing can be obtained even in the far detuning regime of a sideband-resolved system. By using the dielectrophoretic force of a metallic needle kept in close proximity to the membrane, we implement the one-quadrature active feedback scheme to prevent the divergence of the amplified quadrature and surpass the 3 dB limit of mechanical squeezing. We also discuss different regions of the sideband spectrum where strong squeezing can be obtained. Although the demonstration here is classical, this technique is equally applicable to prepare the mechanical oscillator in a quantum squeezed state.
△ Less
Submitted 3 July, 2018; v1 submitted 24 May, 2018;
originally announced May 2018.
-
Review on the conversion of thermoacoustic power into electricity
Authors:
Michael A. G. Timmer,
Kees de Blok,
Theo H. van der Meer
Abstract:
Thermoacoustic engines convert heat energy into high amplitude acoustic waves and subsequently into electric power. This article provides a review of the four main methods to convert the (thermo)acoustic power into electricity. First, loudspeakers and linear alternators are discussed in a section on electromagnetic devices. This is followed by sections on piezoelectric transducers, magnetohydrodyn…
▽ More
Thermoacoustic engines convert heat energy into high amplitude acoustic waves and subsequently into electric power. This article provides a review of the four main methods to convert the (thermo)acoustic power into electricity. First, loudspeakers and linear alternators are discussed in a section on electromagnetic devices. This is followed by sections on piezoelectric transducers, magnetohydrodynamic generators, and bidirectional turbines. Each segment provides a literature review of the given technology for the field of thermoacoustics, focusing on possible configurations, operating characteristics, output performance, and analytical and numerical methods to study the devices. This information is used as an input to discuss the performance and feasibility of each method, and to identify challenges that should be overcome for a more successful implementation in thermoacoustic engines. The work is concluded by a comparison of the four technologies, concentrating on the possible areas of application, the conversion efficiency, maximum electrical power output and more generally the suggested focus for future work in the field.
△ Less
Submitted 12 February, 2018;
originally announced February 2018.
-
Characterization and reduction of flow separation in jet pumps for laminar oscillatory flows
Authors:
Michael A. G. Timmer,
Joris P. Oosterhuis,
Simon Bühler,
Douglas Wilcox,
Theo H. van der Meer
Abstract:
A computational fluid dynamics model is used to predict the oscillatory flow through tapered cylindrical tube sections (jet pumps). The asymmetric shape of jet pumps results in a time-averaged pressure drop that can be used to suppress Gedeon streaming in closed-loop thermoacoustic devices. However, previous work has shown that flow separation in the diverging flow direction counteracts the time-a…
▽ More
A computational fluid dynamics model is used to predict the oscillatory flow through tapered cylindrical tube sections (jet pumps). The asymmetric shape of jet pumps results in a time-averaged pressure drop that can be used to suppress Gedeon streaming in closed-loop thermoacoustic devices. However, previous work has shown that flow separation in the diverging flow direction counteracts the time-averaged pressure drop. In this work, the characteristics of flow separation in jet pumps are identified and coupled with the observed jet pump performance. Furthermore, it is shown that the onset of flow separation can be shifted to larger displacement amplitudes by designs that have a smoother transition between the small opening and the tapered surface of the jet pump. These design alterations also reduce the duration of separated flow, resulting in more effective and robust jet pumps. To make the proposed jet pump designs more compact without reducing their performance, the minimum big opening radius that can be implemented before the local minor losses have an influence on the jet pump performance is investigated. To validate the numerical results, they are compared with experimental results for one of the proposed jet pump designs.
△ Less
Submitted 4 January, 2016;
originally announced January 2016.
-
Jet pumps for thermoacoustic applications: design guidelines based on a numerical parameter study
Authors:
Joris P. Oosterhuis,
Simon Bühler,
Douglas Wilcox,
Theo H. van der Meer
Abstract:
The oscillatory flow through tapered cylindrical tube sections (jet pumps) is characterized by a numerical parameter study. The shape of a jet pump results in asymmetric hydrodynamic end effects which cause a time-averaged pressure drop to occur under oscillatory flow conditions. Hence, jet pumps are used as streaming suppressors in closed-loop thermoacoustic devices. A two-dimensional axisymmetri…
▽ More
The oscillatory flow through tapered cylindrical tube sections (jet pumps) is characterized by a numerical parameter study. The shape of a jet pump results in asymmetric hydrodynamic end effects which cause a time-averaged pressure drop to occur under oscillatory flow conditions. Hence, jet pumps are used as streaming suppressors in closed-loop thermoacoustic devices. A two-dimensional axisymmetric computational fluid dynamics model is used to calculate the performance of a large number of conical jet pump geometries in terms of time-averaged pressure drop and acoustic power dissipation. The investigated geometrical parameters include the jet pump length, taper angle, waist diameter and waist curvature. In correspondence with previous work, four flow regimes are observed which characterize the jet pump performance and dimensionless parameters are introduced to scale the performance of the various jet pump geometries. The simulation results are compared to an existing quasi-steady theory and it is shown that this theory is only applicable in a small operation region. Based on the scaling parameters, an optimum operation region is defined and design guidelines are proposed which can be directly used for future jet pump design.
△ Less
Submitted 20 August, 2015;
originally announced August 2015.