-
Resonant behavior and stability of a linear three-mirror cavity
Authors:
Paul Stevens,
Vincent Loriette,
Manuel Andia,
François Glotin,
Angélique Lartaux-Vollard,
Nicolas Leroy,
Aymeric van de Walle
Abstract:
The implementation of Fabry-Perot cavities in gravitational-wave detectors has been pivotal to improving their sensitivity, allowing the observation of an increasing number of cosmological events with higher signal-to-noise ratio. Notably, Fabry-Perot cavities play a key role in the frequency-dependent squeezing technique, which provides a reduction of quantum noise over the whole observation freq…
▽ More
The implementation of Fabry-Perot cavities in gravitational-wave detectors has been pivotal to improving their sensitivity, allowing the observation of an increasing number of cosmological events with higher signal-to-noise ratio. Notably, Fabry-Perot cavities play a key role in the frequency-dependent squeezing technique, which provides a reduction of quantum noise over the whole observation frequency spectrum. In this context, linear three-mirror cavities could be of interest because of the additional control that they can provide.
In this paper, we develop a complete model to describe the stability behavior and the properties of transmitted and reflected fields of a linear three-mirror cavity aiming to be used for design purposes. In particular, simulations are carried out to show the evolution of the characteristic "double-peak" as a function of cavity parameters, which is one of the key features of this system. We show that the double-peak shape is almost freely adjustable, either in terms of spacing between maxima, their relative height and their intrinsic width. This is made possible by changing the mirrors' reflectivity coefficients and their spacing. However, the amount of achievable realistic configurations is limited by the stability conditions of the cavity. In particular, if the middle mirror is not close enough to the center of the cavity, it could be difficult to obtain a stable three-mirror cavity. Different geometries have been studied to obtain a stable cavity system.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
Ultralight vector dark matter search using data from the KAGRA O3GK run
Authors:
The LIGO Scientific Collaboration,
the Virgo Collaboration,
the KAGRA Collaboration,
A. G. Abac,
R. Abbott,
H. Abe,
I. Abouelfettouh,
F. Acernese,
K. Ackley,
C. Adamcewicz,
S. Adhicary,
N. Adhikari,
R. X. Adhikari,
V. K. Adkins,
V. B. Adya,
C. Affeldt,
D. Agarwal,
M. Agathos,
O. D. Aguiar,
I. Aguilar,
L. Aiello,
A. Ain,
P. Ajith,
T. Akutsu,
S. Albanesi
, et al. (1778 additional authors not shown)
Abstract:
Among the various candidates for dark matter (DM), ultralight vector DM can be probed by laser interferometric gravitational wave detectors through the measurement of oscillating length changes in the arm cavities. In this context, KAGRA has a unique feature due to differing compositions of its mirrors, enhancing the signal of vector DM in the length change in the auxiliary channels. Here we prese…
▽ More
Among the various candidates for dark matter (DM), ultralight vector DM can be probed by laser interferometric gravitational wave detectors through the measurement of oscillating length changes in the arm cavities. In this context, KAGRA has a unique feature due to differing compositions of its mirrors, enhancing the signal of vector DM in the length change in the auxiliary channels. Here we present the result of a search for $U(1)_{B-L}$ gauge boson DM using the KAGRA data from auxiliary length channels during the first joint observation run together with GEO600. By applying our search pipeline, which takes into account the stochastic nature of ultralight DM, upper bounds on the coupling strength between the $U(1)_{B-L}$ gauge boson and ordinary matter are obtained for a range of DM masses. While our constraints are less stringent than those derived from previous experiments, this study demonstrates the applicability of our method to the lower-mass vector DM search, which is made difficult in this measurement by the short observation time compared to the auto-correlation time scale of DM.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
From Architectures to Applications: A Review of Neural Quantum States
Authors:
Hannah Lange,
Anka Van de Walle,
Atiye Abedinnia,
Annabelle Bohrdt
Abstract:
Due to the exponential growth of the Hilbert space dimension with system size, the simulation of quantum many-body systems has remained a persistent challenge until today. Here, we review a relatively new class of variational states for the simulation of such systems, namely neural quantum states (NQS), which overcome the exponential scaling by compressing the state in terms of the network paramet…
▽ More
Due to the exponential growth of the Hilbert space dimension with system size, the simulation of quantum many-body systems has remained a persistent challenge until today. Here, we review a relatively new class of variational states for the simulation of such systems, namely neural quantum states (NQS), which overcome the exponential scaling by compressing the state in terms of the network parameters rather than storing all exponentially many coefficients needed for an exact parameterization of the state. We introduce the commonly used NQS architectures and their various applications for the simulation of ground and excited states, finite temperature and open system states as well as NQS approaches to simulate the dynamics of quantum states. Furthermore, we discuss NQS in the context of quantum state tomography.
△ Less
Submitted 5 April, 2024; v1 submitted 14 February, 2024;
originally announced February 2024.
-
Search for Eccentric Black Hole Coalescences during the Third Observing Run of LIGO and Virgo
Authors:
The LIGO Scientific Collaboration,
the Virgo Collaboration,
the KAGRA Collaboration,
A. G. Abac,
R. Abbott,
H. Abe,
F. Acernese,
K. Ackley,
C. Adamcewicz,
S. Adhicary,
N. Adhikari,
R. X. Adhikari,
V. K. Adkins,
V. B. Adya,
C. Affeldt,
D. Agarwal,
M. Agathos,
O. D. Aguiar,
I. Aguilar,
L. Aiello,
A. Ain,
P. Ajith,
T. Akutsu,
S. Albanesi,
R. A. Alfaidi
, et al. (1750 additional authors not shown)
Abstract:
Despite the growing number of confident binary black hole coalescences observed through gravitational waves so far, the astrophysical origin of these binaries remains uncertain. Orbital eccentricity is one of the clearest tracers of binary formation channels. Identifying binary eccentricity, however, remains challenging due to the limited availability of gravitational waveforms that include effect…
▽ More
Despite the growing number of confident binary black hole coalescences observed through gravitational waves so far, the astrophysical origin of these binaries remains uncertain. Orbital eccentricity is one of the clearest tracers of binary formation channels. Identifying binary eccentricity, however, remains challenging due to the limited availability of gravitational waveforms that include effects of eccentricity. Here, we present observational results for a waveform-independent search sensitive to eccentric black hole coalescences, covering the third observing run (O3) of the LIGO and Virgo detectors. We identified no new high-significance candidates beyond those that were already identified with searches focusing on quasi-circular binaries. We determine the sensitivity of our search to high-mass (total mass $M>70$ $M_\odot$) binaries covering eccentricities up to 0.3 at 15 Hz orbital frequency, and use this to compare model predictions to search results. Assuming all detections are indeed quasi-circular, for our fiducial population model, we place an upper limit for the merger rate density of high-mass binaries with eccentricities $0 < e \leq 0.3$ at $0.33$ Gpc$^{-3}$ yr$^{-1}$ at 90\% confidence level.
△ Less
Submitted 7 August, 2023;
originally announced August 2023.
-
Search for gravitational-lensing signatures in the full third observing run of the LIGO-Virgo network
Authors:
The LIGO Scientific Collaboration,
the Virgo Collaboration,
the KAGRA Collaboration,
R. Abbott,
H. Abe,
F. Acernese,
K. Ackley,
S. Adhicary,
N. Adhikari,
R. X. Adhikari,
V. K. Adkins,
V. B. Adya,
C. Affeldt,
D. Agarwal,
M. Agathos,
O. D. Aguiar,
L. Aiello,
A. Ain,
P. Ajith,
T. Akutsu,
S. Albanesi,
R. A. Alfaidi,
C. Alléné,
A. Allocca,
P. A. Altin
, et al. (1670 additional authors not shown)
Abstract:
Gravitational lensing by massive objects along the line of sight to the source causes distortions of gravitational wave-signals; such distortions may reveal information about fundamental physics, cosmology and astrophysics. In this work, we have extended the search for lensing signatures to all binary black hole events from the third observing run of the LIGO--Virgo network. We search for repeated…
▽ More
Gravitational lensing by massive objects along the line of sight to the source causes distortions of gravitational wave-signals; such distortions may reveal information about fundamental physics, cosmology and astrophysics. In this work, we have extended the search for lensing signatures to all binary black hole events from the third observing run of the LIGO--Virgo network. We search for repeated signals from strong lensing by 1) performing targeted searches for subthreshold signals, 2) calculating the degree of overlap amongst the intrinsic parameters and sky location of pairs of signals, 3) comparing the similarities of the spectrograms amongst pairs of signals, and 4) performing dual-signal Bayesian analysis that takes into account selection effects and astrophysical knowledge. We also search for distortions to the gravitational waveform caused by 1) frequency-independent phase shifts in strongly lensed images, and 2) frequency-dependent modulation of the amplitude and phase due to point masses. None of these searches yields significant evidence for lensing. Finally, we use the non-detection of gravitational-wave lensing to constrain the lensing rate based on the latest merger-rate estimates and the fraction of dark matter composed of compact objects.
△ Less
Submitted 17 April, 2023;
originally announced April 2023.
-
Special Glass Structures for First Principles Studies of Bulk Metallic Glasses
Authors:
Siya Zhu,
Jan Schroers,
Stefano Curtarolo,
Hagen Eckert,
Axel van de Walle
Abstract:
The atomic-level structure of bulk metallic glasses is a key determinant of their properties. An accurate representation of amorphous systems in computational studies has traditionally required large supercells that are unfortunately computationally demanding to handle using the most accurate ab initio calculations. To address this, we propose to specifically design small-cell structures that best…
▽ More
The atomic-level structure of bulk metallic glasses is a key determinant of their properties. An accurate representation of amorphous systems in computational studies has traditionally required large supercells that are unfortunately computationally demanding to handle using the most accurate ab initio calculations. To address this, we propose to specifically design small-cell structures that best reproduce the local geometric descriptors (e.g., pairwise distances or bond angle distributions) of a large-cell simulation. We rely on molecular dynamics (MD) driven by empirical potentials to generate the target descriptors, while we use reverse Monte Carlo (RMC) methods to optimize the small-cell structure. The latter can then be used to determine mechanical and electronic properties using more accurate electronic structure calculations. The method is implemented in the Metallic Amorphous Structures Toolkit (MAST) software package.
△ Less
Submitted 22 February, 2023;
originally announced February 2023.
-
Open data from the third observing run of LIGO, Virgo, KAGRA and GEO
Authors:
The LIGO Scientific Collaboration,
the Virgo Collaboration,
the KAGRA Collaboration,
R. Abbott,
H. Abe,
F. Acernese,
K. Ackley,
S. Adhicary,
N. Adhikari,
R. X. Adhikari,
V. K. Adkins,
V. B. Adya,
C. Affeldt,
D. Agarwal,
M. Agathos,
O. D. Aguiar,
L. Aiello,
A. Ain,
P. Ajith,
T. Akutsu,
S. Albanesi,
R. A. Alfaidi,
A. Al-Jodah,
C. Alléné,
A. Allocca
, et al. (1719 additional authors not shown)
Abstract:
The global network of gravitational-wave observatories now includes five detectors, namely LIGO Hanford, LIGO Livingston, Virgo, KAGRA, and GEO 600. These detectors collected data during their third observing run, O3, composed of three phases: O3a starting in April of 2019 and lasting six months, O3b starting in November of 2019 and lasting five months, and O3GK starting in April of 2020 and lasti…
▽ More
The global network of gravitational-wave observatories now includes five detectors, namely LIGO Hanford, LIGO Livingston, Virgo, KAGRA, and GEO 600. These detectors collected data during their third observing run, O3, composed of three phases: O3a starting in April of 2019 and lasting six months, O3b starting in November of 2019 and lasting five months, and O3GK starting in April of 2020 and lasting 2 weeks. In this paper we describe these data and various other science products that can be freely accessed through the Gravitational Wave Open Science Center at https://gwosc.org. The main dataset, consisting of the gravitational-wave strain time series that contains the astrophysical signals, is released together with supporting data useful for their analysis and documentation, tutorials, as well as analysis software packages.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
Search for subsolar-mass black hole binaries in the second part of Advanced LIGO's and Advanced Virgo's third observing run
Authors:
The LIGO Scientific Collaboration,
the Virgo Collaboration,
the KAGRA Collaboration,
R. Abbott,
H. Abe,
F. Acernese,
K. Ackley,
S. Adhicary,
N. Adhikari,
R. X. Adhikari,
V. K. Adkins,
V. B. Adya,
C. Affeldt,
D. Agarwal,
M. Agathos,
O. D. Aguiar,
L. Aiello,
A. Ain,
P. Ajith,
T. Akutsu,
S. Albanesi,
R. A. Alfaidi,
C. Alléné,
A. Allocca,
P. A. Altin
, et al. (1680 additional authors not shown)
Abstract:
We describe a search for gravitational waves from compact binaries with at least one component with mass 0.2 $M_\odot$ -- $1.0 M_\odot$ and mass ratio $q \geq 0.1$ in Advanced LIGO and Advanced Virgo data collected between 1 November 2019, 15:00 UTC and 27 March 2020, 17:00 UTC. No signals were detected. The most significant candidate has a false alarm rate of 0.2 $\mathrm{yr}^{-1}$. We estimate t…
▽ More
We describe a search for gravitational waves from compact binaries with at least one component with mass 0.2 $M_\odot$ -- $1.0 M_\odot$ and mass ratio $q \geq 0.1$ in Advanced LIGO and Advanced Virgo data collected between 1 November 2019, 15:00 UTC and 27 March 2020, 17:00 UTC. No signals were detected. The most significant candidate has a false alarm rate of 0.2 $\mathrm{yr}^{-1}$. We estimate the sensitivity of our search over the entirety of Advanced LIGO's and Advanced Virgo's third observing run, and present the most stringent limits to date on the merger rate of binary black holes with at least one subsolar-mass component. We use the upper limits to constrain two fiducial scenarios that could produce subsolar-mass black holes: primordial black holes (PBH) and a model of dissipative dark matter. The PBH model uses recent prescriptions for the merger rate of PBH binaries that include a rate suppression factor to effectively account for PBH early binary disruptions. If the PBHs are monochromatically distributed, we can exclude a dark matter fraction in PBHs $f_\mathrm{PBH} \gtrsim 0.6$ (at 90% confidence) in the probed subsolar-mass range. However, if we allow for broad PBH mass distributions we are unable to rule out $f_\mathrm{PBH} = 1$. For the dissipative model, where the dark matter has chemistry that allows a small fraction to cool and collapse into black holes, we find an upper bound $f_{\mathrm{DBH}} < 10^{-5}$ on the fraction of atomic dark matter collapsed into black holes.
△ Less
Submitted 26 January, 2024; v1 submitted 2 December, 2022;
originally announced December 2022.
-
Model-based cross-correlation search for gravitational waves from the low-mass X-ray binary Scorpius X-1 in LIGO O3 data
Authors:
The LIGO Scientific Collaboration,
the Virgo Collaboration,
the KAGRA Collaboration,
R. Abbott,
H. Abe,
F. Acernese,
K. Ackley,
S. Adhicary,
N. Adhikari,
R. X. Adhikari,
V. K. Adkins,
V. B. Adya,
C. Affeldt,
D. Agarwal,
M. Agathos,
O. D. Aguiar,
L. Aiello,
A. Ain,
P. Ajith,
T. Akutsu,
S. Albanesi,
R. A. Alfaidi,
C. Alléné,
A. Allocca,
P. A. Altin
, et al. (1670 additional authors not shown)
Abstract:
We present the results of a model-based search for continuous gravitational waves from the low-mass X-ray binary Scorpius X-1 using LIGO detector data from the third observing run of Advanced LIGO, Advanced Virgo and KAGRA. This is a semicoherent search which uses details of the signal model to coherently combine data separated by less than a specified coherence time, which can be adjusted to bala…
▽ More
We present the results of a model-based search for continuous gravitational waves from the low-mass X-ray binary Scorpius X-1 using LIGO detector data from the third observing run of Advanced LIGO, Advanced Virgo and KAGRA. This is a semicoherent search which uses details of the signal model to coherently combine data separated by less than a specified coherence time, which can be adjusted to balance sensitivity with computing cost. The search covered a range of gravitational-wave frequencies from 25Hz to 1600Hz, as well as ranges in orbital speed, frequency and phase determined from observational constraints. No significant detection candidates were found, and upper limits were set as a function of frequency. The most stringent limits, between 100Hz and 200Hz, correspond to an amplitude h0 of about 1e-25 when marginalized isotropically over the unknown inclination angle of the neutron star's rotation axis, or less than 4e-26 assuming the optimal orientation. The sensitivity of this search is now probing amplitudes predicted by models of torque balance equilibrium. For the usual conservative model assuming accretion at the surface of the neutron star, our isotropically-marginalized upper limits are close to the predicted amplitude from about 70Hz to 100Hz; the limits assuming the neutron star spin is aligned with the most likely orbital angular momentum are below the conservative torque balance predictions from 40Hz to 200Hz. Assuming a broader range of accretion models, our direct limits on gravitational-wave amplitude delve into the relevant parameter space over a wide range of frequencies, to 500Hz or more.
△ Less
Submitted 2 January, 2023; v1 submitted 6 September, 2022;
originally announced September 2022.
-
aflow++: a C++ framework for autonomous materials design
Authors:
C. Oses,
M. Esters,
D. Hicks,
S. Divilov,
H. Eckert,
R. Friedrich,
M. J. Mehl,
A. Smolyanyuk,
X. Campilongo,
A. van de Walle,
J Schroers,
A. G. Kusne,
I. Takeuchi,
E. Zurek,
M. Buongiorno Nardelli,
M. Fornari,
Y. Lederer,
O. Levy,
C. Toher,
S. Curtarolo
Abstract:
The realization of novel technological opportunities given by computational and autonomous materials design requires efficient and effective frameworks. For more than two decades, aflow++ (Automatic-Flow Framework for Materials Discovery) has provided an interconnected collection of algorithms and workflows to address this challenge. This article contains an overview of the software and some of it…
▽ More
The realization of novel technological opportunities given by computational and autonomous materials design requires efficient and effective frameworks. For more than two decades, aflow++ (Automatic-Flow Framework for Materials Discovery) has provided an interconnected collection of algorithms and workflows to address this challenge. This article contains an overview of the software and some of its most heavily-used functionalities, including algorithmic details, standards, and examples. Key thrusts are highlighted: the calculation of structural, electronic, thermodynamic, and thermomechanical properties in addition to the modeling of complex materials, such as high-entropy ceramics and bulk metallic glasses. The aflow++ software prioritizes interoperability, minimizing the number of independent parameters and tolerances. It ensures consistency of results across property sets - facilitating machine learning studies. The software also features various validation schemes, offering real-time quality assurance for data generated in a high-throughput fashion. Altogether, these considerations contribute to the development of large and reliable materials databases that can ultimately deliver future materials systems
△ Less
Submitted 5 August, 2022;
originally announced August 2022.
-
Rapid screening of high-throughput ground state predictions
Authors:
Sayan Samanta,
Axel Van de Walle
Abstract:
High-through computational thermodynamic approaches are becoming an increasingly popular tool to uncover novel compounds. However, traditional methods tend to be limited to stability predictions of stoichiometric phases at absolute zero. Such methods thus carry the risk of identifying an excess of possible phases that do not survive to temperatures of practical relevance. We demonstrate how the Ca…
▽ More
High-through computational thermodynamic approaches are becoming an increasingly popular tool to uncover novel compounds. However, traditional methods tend to be limited to stability predictions of stoichiometric phases at absolute zero. Such methods thus carry the risk of identifying an excess of possible phases that do not survive to temperatures of practical relevance. We demonstrate how the Calphad formalism, informed by simple first-principles input can be simply used to overcome this problem at a low computational cost and deliver quantitatively useful phase diagram predictions at all temperatures. We illustrate the method by re-assessing prior compound formation predictions and reconcile these findings with long-standing experimental evidence to the contrary.
△ Less
Submitted 19 April, 2022;
originally announced April 2022.
-
Re-entrant melting of sodium, magnesium, and aluminum: General trend
Authors:
Qi-Jun Hong,
Axel van de Walle
Abstract:
Re-entrant melting (in which a substance's melting point starts to decrease beyond a certain pressure) is believed to be an unusual phenomenon. Among the elements, it has so far only been observed in a very limited number of species, e.g., the alkali metals. Our density functional theory calculations reveal that this behavior actually extends beyond alkali metals to include magnesium, which also u…
▽ More
Re-entrant melting (in which a substance's melting point starts to decrease beyond a certain pressure) is believed to be an unusual phenomenon. Among the elements, it has so far only been observed in a very limited number of species, e.g., the alkali metals. Our density functional theory calculations reveal that this behavior actually extends beyond alkali metals to include magnesium, which also undergoes re-entrant melting, though at the much higher pressure of ~300 GPa. We find that the origin of re-entrant melting is the faster softening of interatomic interactions in the liquid phase than in the solid, as pressure rises. We propose a simple approach to estimate pressure-volume relations and show that this characteristic softening pattern is widely observed in metallic elements. We verify this prediction in the case of aluminum by finding re-entrant melting at ~4000 GPa. These results suggest that re-entrant melting may be a more universal feature than previously thought.
△ Less
Submitted 4 May, 2020; v1 submitted 16 October, 2019;
originally announced October 2019.
-
A simple local expression for the prefactor in transition state theory
Authors:
Sara Kadkhodaei,
Axel van de Walle
Abstract:
We present a simple and accurate computational technique to determine the frequency prefactor in harmonic transition state theory without necessitating full phonon density of states (DOS) calculations. The atoms in the system are partitioned into an "active region", where the kinetic process takes place, and an "environment" surrounding the active region. It is shown that the prefactor can be obta…
▽ More
We present a simple and accurate computational technique to determine the frequency prefactor in harmonic transition state theory without necessitating full phonon density of states (DOS) calculations. The atoms in the system are partitioned into an "active region", where the kinetic process takes place, and an "environment" surrounding the active region. It is shown that the prefactor can be obtained by a partial phonon DOS calculation of the active region with a simple correction term accounting for the environment, under reasonable assumptions regarding atomic interactions. Convergence with respect to the size of the active region is investigated for different systems, as well as the reduction in computational costs when compared to full phonon DOS calculation. Additionally, we provide an open source implementation of the algorithm that can be added as an extension to LAMMPS software.
△ Less
Submitted 8 April, 2019; v1 submitted 22 December, 2018;
originally announced December 2018.
-
A Tetrahedron-tiling Method for Crystal Structure Prediction
Authors:
Qi-Jun Hong,
Joseph Yasi,
Axel van de Walle
Abstract:
Reliable and robust methods of predicting the crystal structure of a compound, based only on its chemical composition, is crucial to the study of materials and their applications. Despite considerable ongoing research efforts, crystal structure prediction remains a challenging problem that demands large computational resources. Here we propose an efficient approach for first-principles crystal str…
▽ More
Reliable and robust methods of predicting the crystal structure of a compound, based only on its chemical composition, is crucial to the study of materials and their applications. Despite considerable ongoing research efforts, crystal structure prediction remains a challenging problem that demands large computational resources. Here we propose an efficient approach for first-principles crystal structure prediction. The new method explores and finds crystal structures by tiling together elementary tetrahedra that are energetically favorable and geometrically matching each other. This approach has three distinguishing features: a favorable building unit, an efficient calculation of local energy, and a stochastic Monte Carlo simulation of crystal growth. By applying the method to the crystal structure prediction of various materials, we demonstrate its validity and potential as a promising alternative to current methods.
△ Less
Submitted 27 February, 2017;
originally announced February 2017.
-
Free energy calculation of mechanically unstable but dynamically stabilized bcc titanium
Authors:
Sara Kadkhodaei,
Qi-Jun Hong,
Axel van de Walle
Abstract:
The phase diagram of numerous materials of technological importance features high-symmetry high-temperature phases that exhibit phonon instabilities. Leading examples include shape-memory alloys, as well as ferroelectric, refractory, and structural materials. The thermodynamics of these phases have proven challenging to handle by atomistic computational thermodynamic techniques, due to the occurre…
▽ More
The phase diagram of numerous materials of technological importance features high-symmetry high-temperature phases that exhibit phonon instabilities. Leading examples include shape-memory alloys, as well as ferroelectric, refractory, and structural materials. The thermodynamics of these phases have proven challenging to handle by atomistic computational thermodynamic techniques, due to the occurrence of constant anharmonicity-driven hop** between local low-symmetry distortions, while maintaining a high-symmetry time-averaged structure. To compute the free energy in such phases, we propose to explore the system's potential-energy surface by discrete sampling of local minima by means of a lattice gas Monte Carlo approach and by continuous sampling by means of a lattice dynamics approach in the vicinity of each local minimum. Given the proximity of the local minima, it is necessary to carefully partition phase space by using a Voronoi tessellation to constrain the domain of integration of the partition function, in order to avoid double-counting artifacts and enable an accurate harmonic treatment near each local minima. We consider the bcc phase of titanium as a prototypical examples to illustrate our approach.
△ Less
Submitted 3 February, 2017;
originally announced February 2017.
-
An epicycle method for elasticity limit calculations
Authors:
Axel van de Walle,
Sara Kadkhodaei,
Ruoshi Sun,
Qi-Jun Hong
Abstract:
The task of finding the smallest energy needed to bring a solid to its onset of mechanical instability arises in many problems in materials science, from the determination of the elasticity limit to the consistent assignment of free energies to mechanically unstable phases. However, unless the space of possible deformations is low-dimensional and a priori known, this problem is numerically difficu…
▽ More
The task of finding the smallest energy needed to bring a solid to its onset of mechanical instability arises in many problems in materials science, from the determination of the elasticity limit to the consistent assignment of free energies to mechanically unstable phases. However, unless the space of possible deformations is low-dimensional and a priori known, this problem is numerically difficult, as it involves minimizing a function under a constraint on its Hessian, which is computionally prohibitive to obtain in low symmetry systems, especially if electronic structure calculations are used. We propose a method that is inspired by the well-known dimer method for saddle point searches but that adds the necessary ingredients to solve for the lowest onset of mechanical instability. The method consists of two nested optimization problems. The inner one involves a dimer-like construction to find the direction of smallest curvature as well as the gradient of this curvature function. The outer optimization then minimizes energy using the result of the inner optimization problem to constrain the search to the hypersurface enclosing all points of zero minimum curvature. Example applications to both model systems and electronic structure calculations are given.
△ Less
Submitted 12 January, 2017;
originally announced January 2017.
-
Ab initio calculation of anisotropic interfacial excess free energies
Authors:
Axel van de Walle,
Chirranjeevi Balaji Gopal,
Steve Demers,
Qijun Hong,
Adam Kowalski,
Ljubomir Miljacic,
Gregory Pomrehn,
Pratyush Tiwary
Abstract:
We describe a simple method to determine, from ab initio calculations, the complete orientation-dependence of interfacial free energies in solid-state crystalline systems. We illustrate the method with an application to precipitates in the Al-Ti alloy system. The method combines the cluster expansion formalism in its most general form (to model the system's energetics) with the inversion of the we…
▽ More
We describe a simple method to determine, from ab initio calculations, the complete orientation-dependence of interfacial free energies in solid-state crystalline systems. We illustrate the method with an application to precipitates in the Al-Ti alloy system. The method combines the cluster expansion formalism in its most general form (to model the system's energetics) with the inversion of the well-known Wulff construction (to recover interfacial energies from equilibrium precipitate shapes). Although the inverse Wulff construction only provides the relative magnitude of the various interfacial free energies, absolute free energies can be recovered from a calculation of a single, conveniently chosen, planar interface. The method is able to account for essentially all sources of entropy (arising from phonons, bulk point defects, as well as interface roughness) and is thus able to transparently handle both atomically smooth and rough interfaces. The approach expresses the resulting orientation-dependence of the interfacial properties using symmetry-adapted bases for general orientation-dependent quantities. As a by-product, this paper thus provides a simple and general method to generate such basis functions, which prove useful in a variety of other applications, for instance to represent the anisotropy of the so-called constituent strain elastic energy.
△ Less
Submitted 22 April, 2014; v1 submitted 1 January, 2013;
originally announced January 2013.
-
Accelerated Molecular Dynamics through stochastic iterations to strengthen yield of path hop** over upper states (SISYPHUS)
Authors:
Pratyush Tiwary,
Axel van de Walle
Abstract:
We present a new method, called SISYPHUS (Stochastic Iterations to Strengthen Yield of Path Hop** over Upper States), for extending accessible time-scales in atomistic simulations. The method proceeds by separating phase space into basins, and transition regions between the basins based on a general collective variable (CV) criterion. The transition regions are treated via traditional molecular…
▽ More
We present a new method, called SISYPHUS (Stochastic Iterations to Strengthen Yield of Path Hop** over Upper States), for extending accessible time-scales in atomistic simulations. The method proceeds by separating phase space into basins, and transition regions between the basins based on a general collective variable (CV) criterion. The transition regions are treated via traditional molecular dynamics (MD) while Monte Carlo (MC) methods are used to (i) estimate the expected time spent in each basin and (ii) thermalize the system between two MD episodes. In particular, an efficient adiabatic switching based scheme is used to estimate the time spent inside the basins. The method offers various advantages over existing approaches in terms of (i) providing an accurate real time scale, (ii) avoiding reliance on harmonic transition state theory and (iii) avoiding the need to enumerate all possible transition events. Applications of SISYPHUS to low temperature vacancy diffusion in BCC Ta and adatom island ripening in FCC Al are presented. A new CV appropriate for such condensed phases, especially for transitions involving collective motions of several atoms, is also introduced.
△ Less
Submitted 2 January, 2013; v1 submitted 29 December, 2012;
originally announced December 2012.
-
Ab initio thermodynamics of intrinsic oxygen vacancies in ceria
Authors:
Chirranjeevi Balaji Gopal,
Axel van de Walle
Abstract:
Nonstoichiometric ceria(CeO$_{2-δ}$) is a candidate reaction medium to facilitate two step water splitting cycles and generate hydrogen. Improving upon its thermodynamic suitability through do** requires an understanding of its vacancy thermodynamics. Using density functional theory(DFT) calculations and a cluster expansion based Monte Carlo simulations, we have studied the high temperature ther…
▽ More
Nonstoichiometric ceria(CeO$_{2-δ}$) is a candidate reaction medium to facilitate two step water splitting cycles and generate hydrogen. Improving upon its thermodynamic suitability through do** requires an understanding of its vacancy thermodynamics. Using density functional theory(DFT) calculations and a cluster expansion based Monte Carlo simulations, we have studied the high temperature thermodynamics of intrinsic oxygen vacancies in ceria. The DFT+$U$ approach was used to get the ground state energies of various vacancy configurations in ceria, which were subsequently fit to a cluster expansion Hamiltonian to efficiently model the configurational dependence of energy. The effect of lattice vibrations was incorporated through a temperature dependent cluster expansion. Lattice Monte Carlo simulations using the cluster expansion Hamiltonian were able to detect the miscibility gap in the phase diagram of ceria. The inclusion of vibrational and electronic entropy effects made the agreement with experiments quantitative. The deviation from an ideal solution model was quantified by calculating as a function of nonstoichiometry, a) the solid state entropy from Monte Carlo simulations and b) Warren-Cowley short range order parameters of various pair clusters.
△ Less
Submitted 15 October, 2012; v1 submitted 23 June, 2012;
originally announced June 2012.
-
Intrinsic Defects and Dopability of Zinc Phosphide
Authors:
Steven Demers,
Axel van de Walle
Abstract:
Zinc Phosphide ($Zn_3P_2$) could be the basis for cheap and highly efficient solar cells. Its use in this regard is limited by the difficulty in n-type do** the material. In an effort to understand the mechanism behind this, the energetics and electronic structure of intrinsic point defects in zinc phosphide are studied using generalized Kohn-Sham theory and utilizing the Heyd, Scuseria, and Ern…
▽ More
Zinc Phosphide ($Zn_3P_2$) could be the basis for cheap and highly efficient solar cells. Its use in this regard is limited by the difficulty in n-type do** the material. In an effort to understand the mechanism behind this, the energetics and electronic structure of intrinsic point defects in zinc phosphide are studied using generalized Kohn-Sham theory and utilizing the Heyd, Scuseria, and Ernzerhof (HSE) hybrid functional for exchange and correlation. Novel 'perturbation extrapolation' is utilized to extend the use of the computationally expensive HSE functional to this large-scale defect system. According to calculations, the formation energy of charged phosphorus interstitial defects are very low in n-type $Zn_3P_2$ and act as 'electron sinks', nullifying the desired do** and lowering the fermi-level back towards the p-type regime. This is consistent with experimental observations of both the tendency of conductivity to rise with phosphorus partial pressure, and with current partial successes in n-type do** in very zinc-rich growth conditions.
△ Less
Submitted 2 March, 2012;
originally announced March 2012.
-
Realistic time-scale fully atomistic simulations of surface nucleation of dislocations in pristine nanopillars
Authors:
Pratyush Tiwary,
Axel van de Walle
Abstract:
We use our recently proposed accelerated dynamics algorithm (Tiwary & van de Walle, 2011) to calculate temperature and stress dependence of activation free energy for surface nucleation of dislocations in pristine Gold nanopillars under realistic loads. While maintaining fully atomistic resolution, we achieve the fraction of a second time-scale regime. We find that the activation free energy depen…
▽ More
We use our recently proposed accelerated dynamics algorithm (Tiwary & van de Walle, 2011) to calculate temperature and stress dependence of activation free energy for surface nucleation of dislocations in pristine Gold nanopillars under realistic loads. While maintaining fully atomistic resolution, we achieve the fraction of a second time-scale regime. We find that the activation free energy depends significantly on the driving force (stress or strain) and temperature, leading to very high activation entropies. We also perform compression tests on Gold nanopillars for strain rates varying between 7 orders of magnitudes, reaching as low as 10^3/s. Our calculations show the quantitative effects on the yield point of unrealistic strain-rate Molecular Dynamics calculations: we find that while the failure mechanism for <001> compression of Gold nanopillars remains the same across the entire strain-rate range, the elastic limit (defined as stress for nucleation of the first dislocation) depends significantly on the strain-rate. We also propose a new methodology that overcomes some of the limits in our original accelerated dynamics scheme (and accelerated dynamics methods in general). We lay out our methods in sufficient details so as to be used for understanding and predicting deformation mechanism under realistic driving forces for various problems.
△ Less
Submitted 11 May, 2013; v1 submitted 21 February, 2012;
originally announced February 2012.
-
First Principles Phase Diagram Calculations for the Octahedral-Interstitial System $HfO_{X}$, $0 \leq X \leq 1/2$
Authors:
Benjamin P. Burton,
Axel van de Walle
Abstract:
First principles based phase diagram calculations were performed for the hexagonal closest packed octahedral-interstitial solid solution system $αHfO_{X} ($αHf[ ]_{1-X}O_{X}$; [ ]=Vacancy; $0 \leq X \leq 1/2$). The cluster expansion method was used to do a ground state analysis, and to calculate the phase diagram. The predicted diagram has four ordered ground-states in the range $0 \leq X \leq 1/2…
▽ More
First principles based phase diagram calculations were performed for the hexagonal closest packed octahedral-interstitial solid solution system $αHfO_{X} ($αHf[ ]_{1-X}O_{X}$; [ ]=Vacancy; $0 \leq X \leq 1/2$). The cluster expansion method was used to do a ground state analysis, and to calculate the phase diagram. The predicted diagram has four ordered ground-states in the range $0 \leq X \leq 1/2$, but one of these, at X=5/12, is predicted to disproportionate at T$\approx 220K$. At X$\approx 1/3 ($Hf_{3}O$) and X$\approx 1/2 ($Hf_{2}O$), order-parameter vs temperature plots predict Devil's Staircases of closely related ordered structures.
△ Less
Submitted 26 July, 2011; v1 submitted 21 July, 2011;
originally announced July 2011.
-
First Principles Phase Diagram Calculations for the Octahedral-Interstitial System ZrO$_{X}$, $0 \leq X \leq 1/2$
Authors:
Benjamin P. Burton,
Axel van de Walle,
Harold T. Stokes
Abstract:
First principles based phase diagram calculations were performed for the octahedral-interstitial solid solution system αZrOX (αZr[ ]_(1-X)OX; [ ]=Vacancy; 0 \leq X \leq 1/2). The cluster expansion method was used to do a ground state analysis, and to calculate the phase diagram. The predicted
diagram has four ordered ground-states in the range 0 \leq X \leq 1/2, but one of these, at X=5/12, is pre…
▽ More
First principles based phase diagram calculations were performed for the octahedral-interstitial solid solution system αZrOX (αZr[ ]_(1-X)OX; [ ]=Vacancy; 0 \leq X \leq 1/2). The cluster expansion method was used to do a ground state analysis, and to calculate the phase diagram. The predicted
diagram has four ordered ground-states in the range 0 \leq X \leq 1/2, but one of these, at X=5/12, is predicted to disproportionate at T \approx 20K, well below the experimentally investigated range T \approx 420K. Thus, at T \succeq 420K, the first-principles based calculation predicts three ordered phases
rather than the four that have been reported by experimentalists.
△ Less
Submitted 21 July, 2011;
originally announced July 2011.
-
Hybrid deterministic and stochastic approach for efficient atomistic simulations at long time scales
Authors:
Pratyush Tiwary,
Axel van de Walle
Abstract:
We propose a hybrid deterministic and stochastic approach to achieve extended time scales in atomistic simulations that combines the strengths of molecular dynamics (MD) and Monte Carlo (MC) simulations in an easy-to-implement way. The method exploits the rare event nature of the dynamics similar to most current accelerated MD approaches but goes beyond them by providing, without any further compu…
▽ More
We propose a hybrid deterministic and stochastic approach to achieve extended time scales in atomistic simulations that combines the strengths of molecular dynamics (MD) and Monte Carlo (MC) simulations in an easy-to-implement way. The method exploits the rare event nature of the dynamics similar to most current accelerated MD approaches but goes beyond them by providing, without any further computational overhead, (a) rapid thermalization between infrequent events, thereby minimizing spurious correlations, and (b) control over accuracy of time-scale correction, while still providing similar or higher boosts in computational efficiency. We present two applications of the method: (a) Vacancy-mediated diffusion in Fe yields correct diffusivities over a wide range of temperatures and (b) source-controlled plasticity and deformation behavior in Au nanopillars at realistic strain rates (10^4/s and lower), with excellent agreement with previous theoretical predictions and in situ high-resolution transmission electron microscopy observations. The method gives several orders-of-magnitude improvements in computational efficiency relative to standard MD and good scalability with the size of the system.
△ Less
Submitted 17 October, 2011; v1 submitted 30 May, 2011;
originally announced May 2011.
-
Entropic Stabilization and Retrograde Solubility in Zn4Sb3
Authors:
Gregory S. Pomrehn,
Eric S. Toberer,
G. Jeffrey Snyder,
Axel van de Walle
Abstract:
Zn4Sb3 is shown to be entropically stabilized versus decomposition to Zn and ZnSb though the effects of configurational disorder and phonon free energy. Single phase stability is predicted for a range of compositions and temperatures. Retrograde solubility of Zn is predicted on the two-phase boundary region between Zn4Sb3 and Zn. The complex temperature dependent solubility can be used to explain…
▽ More
Zn4Sb3 is shown to be entropically stabilized versus decomposition to Zn and ZnSb though the effects of configurational disorder and phonon free energy. Single phase stability is predicted for a range of compositions and temperatures. Retrograde solubility of Zn is predicted on the two-phase boundary region between Zn4Sb3 and Zn. The complex temperature dependent solubility can be used to explain the variety of nanoparticle formation observed in the system: formation of ZnSb on the Sb rich side, Zn on the far Zn rich side and nano-void formation due to Zn precipitates being reabsorbed at lower temperatures.
△ Less
Submitted 22 October, 2010;
originally announced October 2010.
-
Interatomic potentials for mixed oxide (MOX) nuclear fuels
Authors:
Pratyush Tiwary,
Axel van de Walle,
Byoungseon Jeon,
Niels Grønbech-Jensen
Abstract:
We extend our recently developed interatomic potentials for UO_{2} to the mixed oxide fuel system (U,Pu,Np)O_{2}. We do so by fitting against an extensive database of ab initio results as well as to experimental measurements. The applicability of these interactions to a variety of mixed environments beyond the fitting domain is also assessed. The employed formalism makes these potentials applicabl…
▽ More
We extend our recently developed interatomic potentials for UO_{2} to the mixed oxide fuel system (U,Pu,Np)O_{2}. We do so by fitting against an extensive database of ab initio results as well as to experimental measurements. The applicability of these interactions to a variety of mixed environments beyond the fitting domain is also assessed. The employed formalism makes these potentials applicable across all interatomic distances without the need for any ambiguous splining to the well-established short-range Ziegler-Biersack-Littmark universal pair potential. We therefore expect these to be reliable potentials for carrying out damage simulations (and Molecular Dynamics simulations in general) in nuclear fuels of varying compositions for all relevant atomic collision energies.
△ Less
Submitted 5 October, 2010;
originally announced October 2010.
-
Building effective models from sparse but precise data
Authors:
Eric Cockayne,
Axel van de Walle
Abstract:
A common approach in computational science is to use a set of of highly precise but expensive calculations to parameterize a model that allows less precise, but more rapid calculations on larger scale systems. Least-squares fitting on a model that underfits the data is generally used for this purpose. For arbitrarily precise data free from statistic noise, e.g. ab initio calculations, we argue t…
▽ More
A common approach in computational science is to use a set of of highly precise but expensive calculations to parameterize a model that allows less precise, but more rapid calculations on larger scale systems. Least-squares fitting on a model that underfits the data is generally used for this purpose. For arbitrarily precise data free from statistic noise, e.g. ab initio calculations, we argue that it is more appropriate to begin with a ensemble of models that overfit the data. Within a Bayesian framework, a most likely model can be defined that incorporates physical knowledge, provides error estimates for systems not included in the fit, and reproduces the original data exactly. We apply this approach to obtain a cluster expansion model for the Ca[Zr,Ti]O3 solid solution.
△ Less
Submitted 5 August, 2009;
originally announced August 2009.
-
Multicomponent multisublattice alloys, nonconfigurational entropy and other additions to the Alloy Theoretic Automated Toolkit
Authors:
Axel van de Walle
Abstract:
A number of new functionalities have been added to the Alloy Theoretic Automated Toolkit (ATAT) since it was last reviewed in this journal in 2002. ATAT can now handle multicomponent multisublattice alloy systems, nonconfigurational sources of entropy (e.g. vibrational and electronic entropy), Special Quasirandom Structures (SQS) generation, tensorial cluster expansion construction and includes…
▽ More
A number of new functionalities have been added to the Alloy Theoretic Automated Toolkit (ATAT) since it was last reviewed in this journal in 2002. ATAT can now handle multicomponent multisublattice alloy systems, nonconfigurational sources of entropy (e.g. vibrational and electronic entropy), Special Quasirandom Structures (SQS) generation, tensorial cluster expansion construction and includes interfaces for multiple atomistic or ab initio codes. This paper presents an overview of these features geared towards the practical use of the code. The extensions to the cluster expansion formalism needed to cover multicomponent multisublattice alloys are also formally demonstrated.
△ Less
Submitted 8 June, 2009;
originally announced June 2009.
-
Ab Initio Construction of Interatomic Potentials for Uranium Dioxide Across all Interatomic Distances
Authors:
Pratyush Tiwary,
Axel van de Walle,
Niels Grønbech-Jensen
Abstract:
We provide a methodology for generating interatomic potentials for use in classical molecular dynamics simulations of atomistic phenomena occurring at energy scales ranging from lattice vibrations to crystal defects to high energy collisions. A rigorous method to objectively determine the shape of an interatomic potential over all length scales is introduced by building upon a charged-ion genera…
▽ More
We provide a methodology for generating interatomic potentials for use in classical molecular dynamics simulations of atomistic phenomena occurring at energy scales ranging from lattice vibrations to crystal defects to high energy collisions. A rigorous method to objectively determine the shape of an interatomic potential over all length scales is introduced by building upon a charged-ion generalization of the well-known Ziegler-Biersack-Littmark universal potential that provides the short- and long-range limiting behavior of the potential. At intermediate ranges the potential is smoothly adjusted by fitting to ab initio data. Our formalism provides a complete description of the interatomic potentials that can be used at any energy scale, and thus, eliminates the inherent ambiguity of splining different potentials generated to study different kinds of atomic materials behavior. We exemplify the method by develo** rigid-ion potentials for uranium dioxide interactions under conditions ranging from thermodynamic equilibrium to very high atomic energy collisions relevant for fission events.
△ Less
Submitted 17 September, 2009; v1 submitted 4 June, 2009;
originally announced June 2009.
-
Surface segregation in nanoparticles from first principles
Authors:
Roman V. Chepulskii,
W. H. Butler,
A. van de Walle,
Stefano Curtarolo
Abstract:
FePt nanoparticles are known to exhibit reduced L1$_0$ order with decreasing particle size. The reduction in order reduces the magnetic anisotropy and the thermal stability of the direction of magnetization of the particle. The phenomenon is addressed by investigating the thermodynamic driving forces for surface segregation using a local (inhomogeneous) cluster expansion fitted to ab initio data…
▽ More
FePt nanoparticles are known to exhibit reduced L1$_0$ order with decreasing particle size. The reduction in order reduces the magnetic anisotropy and the thermal stability of the direction of magnetization of the particle. The phenomenon is addressed by investigating the thermodynamic driving forces for surface segregation using a local (inhomogeneous) cluster expansion fitted to ab initio data which accurately represents interatomic interactions in both the bulk and surface regions. Subsequent Monte Carlo simulations reveal that first surface layer Pt segregation is compensated by Pt depletion in the second subsurface layer. This indicates that the core's ordered state is not affected by surface thermodynamics as much as previously thought. Thus, the weak ordering experimentally observed is likely not due to fundamental thermodynamic limitations but rather to kinetic effects.
△ Less
Submitted 18 May, 2009;
originally announced May 2009.
-
First-principles study of ternary fcc solution phases from special quasirandom structures
Authors:
Dongwon Shin,
Axel van de Walle,
Yi Wang,
Zi-Kui Liu
Abstract:
In the present work, ternary Special Quasirandom Structures (SQSs) for a fcc solid solution phase are generated at different compositions, $x_A=x_B=x_C=\tfrac{1}{3}$ and $x_A=\tfrac{1}{2}$, $x_B=x_C=\tfrac{1}{4}$, whose correlation functions are satisfactorily close to those of a random fcc solution. The generated SQSs are used to calculate the mixing enthalpy of the fcc phase in the Ca-Sr-Yb sy…
▽ More
In the present work, ternary Special Quasirandom Structures (SQSs) for a fcc solid solution phase are generated at different compositions, $x_A=x_B=x_C=\tfrac{1}{3}$ and $x_A=\tfrac{1}{2}$, $x_B=x_C=\tfrac{1}{4}$, whose correlation functions are satisfactorily close to those of a random fcc solution. The generated SQSs are used to calculate the mixing enthalpy of the fcc phase in the Ca-Sr-Yb system. It is observed that first-principles calculations of all the binary and ternary SQSs in the Ca-Sr-Yb system exhibit very small local relaxation. It is concluded that the fcc ternary SQSs can provide valuable information about the mixing behavior of the fcc ternary solid solution phase. The SQSs presented in this work can be widely used to study the behavior of ternary fcc solid solutions.
△ Less
Submitted 14 September, 2007;
originally announced September 2007.
-
Thermodynamic properties of binary HCP solution phases from special quasirandom structures
Authors:
Dongwon Shin,
Raymundo Arróyave,
Zi-Kui Liu,
Axel van de Walle
Abstract:
Three different special quasirandom structures (SQS) of the substitutional hcp $A_{1-x}B_x$ binary random solutions ($x=0.25$, 0.5, and 0.75) are presented. These structures are able to mimic the most important pair and multi-site correlation functions corresponding to perfectly random hcp solutions at those compositions. Due to the relatively small size of the generated structures, they can be…
▽ More
Three different special quasirandom structures (SQS) of the substitutional hcp $A_{1-x}B_x$ binary random solutions ($x=0.25$, 0.5, and 0.75) are presented. These structures are able to mimic the most important pair and multi-site correlation functions corresponding to perfectly random hcp solutions at those compositions. Due to the relatively small size of the generated structures, they can be used to calculate the properties of random hcp alloys via first-principles methods. The structures are relaxed in order to find their lowest energy configurations at each composition. In some cases, it was found that full relaxation resulted in complete loss of their parental symmetry as hcp so geometry optimizations in which no local relaxations are allowed were also performed. In general, the first-principles results for the seven binary systems (Cd-Mg, Mg-Zr, Al-Mg, Mo-Ru, Hf-Ti, Hf-Zr, and Ti-Zr) show good agreement with both formation enthalpy and lattice parameters measurements from experiments. It is concluded that the SQS's presented in this work can be widely used to study the behavior of random hcp solutions.
△ Less
Submitted 29 August, 2007;
originally announced August 2007.
-
Atomic-scale structure of the SrTiO3(001)-c(6x2) reconstruction: Experiments and first-principles calculations
Authors:
C. H. Lanier,
A. van de Walle,
N. Erdman,
E. Landree,
O. Warschkow,
A. Kazimirov,
K. R. Poeppelmeier,
J. Zegenhagen,
M. Asta,
L. D. Marks
Abstract:
The c(6x2) is a reconstruction of the SrTiO3(001) surface that is formed between 1050-1100oC in oxidizing annealing conditions. This work proposes a model for the atomic structure for the c(6x2) obtained through a combination of results from transmission electron diffraction, surface x-ray diffraction, direct methods analysis, computational combinational screening, and density functional theory.…
▽ More
The c(6x2) is a reconstruction of the SrTiO3(001) surface that is formed between 1050-1100oC in oxidizing annealing conditions. This work proposes a model for the atomic structure for the c(6x2) obtained through a combination of results from transmission electron diffraction, surface x-ray diffraction, direct methods analysis, computational combinational screening, and density functional theory. As it is formed at high temperatures, the surface is complex and can be described as a short-range ordered phase featuring microscopic domains composed of four main structural motifs. Additionally, non-periodic TiO2 units are present on the surface. Simulated scanning tunneling microscopy images based on the electronic structure calculations are consistent with experimental images.
△ Less
Submitted 17 July, 2007;
originally announced July 2007.
-
Using bond-length dependent transferable force constants to predict vibrational entropies in Au-Cu, Au-Pd, and Cu-Pd alloys
Authors:
Eric J. Wu,
Gerbrand Ceder,
Axel van de Walle
Abstract:
A model is tested to rapidly evaluate the vibrational properties of alloys with site disorder. It is shown that length-dependent transferable force constants exist, and can be used to accurately predict the vibrational entropy of substitutionally ordered and disordered structures in Au-Cu, Au-Pd, and Cu-Pd. For each relevant force constant, a length- dependent function is determined and fitted t…
▽ More
A model is tested to rapidly evaluate the vibrational properties of alloys with site disorder. It is shown that length-dependent transferable force constants exist, and can be used to accurately predict the vibrational entropy of substitutionally ordered and disordered structures in Au-Cu, Au-Pd, and Cu-Pd. For each relevant force constant, a length- dependent function is determined and fitted to force constants obtained from first-principles pseudopotential calculations. We show that these transferable force constants can accurately predict vibrational entropies of L1$_{2}$-ordered and disordered phases in Cu$_{3}$Au, Au$_{3}$Pd, Pd$_{3}$Au, Cu$_{3}$Pd, and Pd$_{3}$Au. In addition, we calculate the vibrational entropy difference between L1$_{2}$-ordered and disordered phases of Au$_{3}$Cu and Cu$_{3}$Pt.
△ Less
Submitted 5 February, 2003;
originally announced February 2003.
-
First-Principles Investigation of Perfect and Diffuse Anti-Phase Boundaries in HCP-Based Ti-Al Alloys
Authors:
A. van de Walle,
M. Asta
Abstract:
First-principles thermodynamic models based on the cluster expansion formalism, monte-carlo simulations and quantum-mechanical total energy calculations are employed to compute short-range-order parameters and diffuse-antiphase-boundary energies in hcp-based $α$-Ti-Al alloys. Our calculations unambiguously reveal a substantial amount of SRO is present in $α$-Ti-6 Al and that, at typical processi…
▽ More
First-principles thermodynamic models based on the cluster expansion formalism, monte-carlo simulations and quantum-mechanical total energy calculations are employed to compute short-range-order parameters and diffuse-antiphase-boundary energies in hcp-based $α$-Ti-Al alloys. Our calculations unambiguously reveal a substantial amount of SRO is present in $α$-Ti-6 Al and that, at typical processing temperatures concentrations, the DAPB energies associated with a single dislocation slip can reach 25 mJ/m$^{2}$. We find very little anisotropy between the energies of DAPBs lying in the basal and prism planes. Perfect antiphase boundaries in DO$_{19}$ ordered Ti$_3$Al are also investigated and their interfacial energies, interfacial stresses and local displacements are calculated from first principles through direct supercell calculations. Our results are discussed in light of mechanical property measurements and deformation microstructure strudies in $α$ Ti-Al alloys.
△ Less
Submitted 13 January, 2003;
originally announced January 2003.
-
First-principles calculation of the effect of strain on the diffusion of Ge adatoms on Si and Ge (001) surfaces
Authors:
A. van de Walle,
M. Asta,
P. W. Voorhees
Abstract:
First-principles calculations are used to calculate the strain dependencies of the binding and diffusion-activation energies for Ge adatoms on both Si(001) and Ge(001) surfaces. Our calculations reveal that the binding and activation energies on a strained Ge(001) surface increase and decrease, respectively, by 0.21 eV and 0.12 eV per percent compressive strain. For a growth temperature of 600 d…
▽ More
First-principles calculations are used to calculate the strain dependencies of the binding and diffusion-activation energies for Ge adatoms on both Si(001) and Ge(001) surfaces. Our calculations reveal that the binding and activation energies on a strained Ge(001) surface increase and decrease, respectively, by 0.21 eV and 0.12 eV per percent compressive strain. For a growth temperature of 600 degrees C, these strain-dependencies give rise to a 16-fold increase in adatom density and a 5-fold decrease in adatom diffusivity in the region of compressive strain surrounding a Ge island with a characteristic size of 10 nm.
△ Less
Submitted 13 January, 2003;
originally announced January 2003.
-
The Alloy Theoretic Automated Toolkit: A User Guide
Authors:
A. van de Walle,
M. Asta,
G. Ceder
Abstract:
Although the formalism that allows the calculation of alloy thermodynamic properties from first-principles has been known for decades, its practical implementation has so far remained a tedious process. The Alloy Theoretic Automated Toolkit (ATAT) drastically simplifies this procedure by implementing decision rules based on formal statistical analysis that frees the researchers from a constant m…
▽ More
Although the formalism that allows the calculation of alloy thermodynamic properties from first-principles has been known for decades, its practical implementation has so far remained a tedious process. The Alloy Theoretic Automated Toolkit (ATAT) drastically simplifies this procedure by implementing decision rules based on formal statistical analysis that frees the researchers from a constant monitoring during the calculation process and automatically "glues" together the input and the output of various codes, in order to provide a high-level interface to the calculation of alloy thermodynamic properties from first-principles. ATAT implements the Structure Inversion Method (SIM), also known as the Connolly-Williams method, in combination with semi-grand-canonical Monte Carlo simulations. In order to make this powerful toolkit available to the wide community of researchers who could benefit from it, this article present a concise user guide outlining the steps required to obtain thermodynamic information from ab initio calculations.
△ Less
Submitted 6 December, 2002;
originally announced December 2002.
-
Automating First-Principles Phase Diagram Calculations
Authors:
A. van de Walle,
G. Ceder
Abstract:
Devising a computational tool that assesses the thermodynamic stability of materials is among the most important steps required to build a ``virtual laboratory'', where materials could be designed from first-principles without relying on experimental input. Although the formalism that allows the calculation of solid state phase diagrams from first principles is well established, its practical im…
▽ More
Devising a computational tool that assesses the thermodynamic stability of materials is among the most important steps required to build a ``virtual laboratory'', where materials could be designed from first-principles without relying on experimental input. Although the formalism that allows the calculation of solid state phase diagrams from first principles is well established, its practical implementation remains a tedious process. The development of a fully automated algorithm to perform such calculations serves two purposes. First, it will make this powerful tool available to large number of researchers. Second, it frees the calculation process from arbitrary parameters, guaranteeing that the results obtained are truly derived from the underlying first-principles calculations. The proposed algorithm formalizes the most difficult step of phase diagram calculations, namely the determination of the ``cluster expansion'', which is a compact representation of the configurational dependence of the alloy's energy. This is traditionally achieved by a fit of the unknown interaction parameters of the cluster expansion to a set of structural energies calculated from first-principles. We present a formal statistical basis for the selection of both the interaction parameters to include in the cluster expansion and of the structures to use in order to determine them. The proposed method relies on the concepts of cross-validation and variance minimization. An application to the calculation of the phase diagram of the Si-Ge, CaO-MgO, Ti-Al, and Cu-Au systems is presented.
△ Less
Submitted 1 June, 2004; v1 submitted 28 January, 2002;
originally announced January 2002.
-
Self-driven lattice-model Monte Carlo simulations of alloy thermodynamic
Authors:
A. van de Walle,
M. Asta
Abstract:
Monte Carlo (MC) simulations of lattice models are a widely used way to compute thermodynamic properties of substitutional alloys. A limitation to their more widespread use is the difficulty of driving a MC simulation in order to obtain the desired quantities. To address this problem, we have devised a variety of high-level algorithms that serve as an interface between the user and a traditional…
▽ More
Monte Carlo (MC) simulations of lattice models are a widely used way to compute thermodynamic properties of substitutional alloys. A limitation to their more widespread use is the difficulty of driving a MC simulation in order to obtain the desired quantities. To address this problem, we have devised a variety of high-level algorithms that serve as an interface between the user and a traditional MC code. The user specifies the goals sought in a high-level form that our algorithms convert into elementary tasks to be performed by a standard MC code. For instance, our algorithms permit the determination of the free energy of an alloy phase over its entire region of stability within a specified accuracy, without requiring any user intervention during the calculations. Our algorithms also enable the direct determination of composition-temperature phase boundaries without requiring the calculation of the whole free energy surface of the alloy system.
△ Less
Submitted 28 January, 2002; v1 submitted 25 January, 2002;
originally announced January 2002.
-
The Effect of Lattice Vibrations on Substitutional Alloy Thermodynamics
Authors:
A. van de Walle,
G. Ceder
Abstract:
A longstanding limitation of first-principles calculations of substitutional alloy phase diagrams is the difficulty to account for lattice vibrations. A survey of the theoretical and experimental literature seeking to quantify the impact of lattice vibrations on phase stability indicates that this effect can be substantial. Typical vibrational entropy differences between phases are of the order…
▽ More
A longstanding limitation of first-principles calculations of substitutional alloy phase diagrams is the difficulty to account for lattice vibrations. A survey of the theoretical and experimental literature seeking to quantify the impact of lattice vibrations on phase stability indicates that this effect can be substantial. Typical vibrational entropy differences between phases are of the order of 0.1 to 0.2 k_B/atom, which is comparable to the typical values of configurational entropy differences in binary alloys (at most 0.693 k_B/atom). This paper describes the basic formalism underlying ab initio phase diagram calculations, along with the generalization required to account for lattice vibrations. We overview the various techniques allowing the theoretical calculation and the experimental determination of phonon dispersion curves and related thermodynamic quantities, such as vibrational entropy or free energy. A clear picture of the origin of vibrational entropy differences between phases in an alloy system is presented that goes beyond the traditional bond counting and volume change arguments. Vibrational entropy change can be attributed to the changes in chemical bond stiffness associated with the changes in bond length that take place during a phase transformation. This so-called ``bond stiffness vs. bond length'' interpretation both summarizes the key phenomenon driving vibrational entropy changes and provides a practical tool to model them.
△ Less
Submitted 23 June, 2001;
originally announced June 2001.
