-
Picosecond timing of charged particles using the TORCH detector
Authors:
Maria Flavia Cicala,
Srishti Bhasin,
Thomas Blake,
Nick H. Brook,
Thomas Conneely,
David Cussans,
Maarten W. U. van Dijk,
Roger Forty,
Christoph Frei,
Emmy P. M. Gabriel,
Rui Gao,
Timothy Gershon,
Thierry Gys,
Thomas Hadavizadeh,
Thomas Henry Hancock,
Neville Harnew,
Thomas Jones,
Michal Kreps,
James Milnes,
Didier Piedigrossi,
Jonas Rademacker,
Jennifer Clare Smallwood
Abstract:
TORCH is a large-area, high-precision time-of-flight (ToF) detector designed to provide charged-particle identification in the 2-20 GeV$/c$ momentum range. Prompt Cherenkov photons emitted by charged hadrons as they traverse a 10mm quartz radiator are propagated to the periphery of the detector, where they are focused onto an array of micro-channel plate photomultiplier tubes (MCP-PMTs). The posit…
▽ More
TORCH is a large-area, high-precision time-of-flight (ToF) detector designed to provide charged-particle identification in the 2-20 GeV$/c$ momentum range. Prompt Cherenkov photons emitted by charged hadrons as they traverse a 10mm quartz radiator are propagated to the periphery of the detector, where they are focused onto an array of micro-channel plate photomultiplier tubes (MCP-PMTs). The position and arrival times of the photons are used to infer the particles' time of entry in the radiator, to identify hadrons based on their ToF. The MCP-PMTs were developed with an industrial partner to satisfy the stringent requirements of the TORCH detector. The requirements include a finely segmented anode, excellent time resolution, and a long lifetime. Over an approximately 10m flight distance, the difference in ToF between a kaon and a pion with 10GeV$/c$ momentum is 35ps, leading to a 10-15ps per track timing resolution requirement. On average 30 photons per hadron are detected, which translates to a single-photon time resolution of 70ps. The TORCH research and development program aims to demonstrate the validity of the detector concept through laboratory and beam tests, results from which are presented. A timing resolution of 70-100ps was reached in beam tests, approaching the TORCH design goal. Laboratory timing tests consist of operating the MCP-PMTs coupled to the TORCH readout electronics. A time resolution of about 50ps was measured, meeting the TORCH target timing resolution.
△ Less
Submitted 25 March, 2022;
originally announced March 2022.
-
Test-beam demonstration of a TORCH prototype module
Authors:
J. C. Smallwood,
S. Bhasin,
T. Blake,
N. H. Brook,
M. F. Cicala,
T. Conneely,
D. Cussans,
M. W. U. van Dijk,
R. Forty,
C. Frei,
E. P. M. Gabriel,
R. Gao,
T. Gershon,
T. Gys,
T. Hadavizadeh,
T. H. Hancock,
N. Harnew,
M. Kreps,
J. Milnes,
D. Piedigrossi,
J. Rademacker
Abstract:
The TORCH time-of-flight detector is designed to provide a 15 ps timing resolution for charged particles, resulting in $π$/$K$ particle identification up to 10 GeV/c momentum over a 10 m flight path. Cherenkov photons, produced in a quartz plate of 10 mm thickness, are focused onto an array of micro-channel plate photomultipliers (MCP-PMTs) which measure the photon arrival times and spatial positi…
▽ More
The TORCH time-of-flight detector is designed to provide a 15 ps timing resolution for charged particles, resulting in $π$/$K$ particle identification up to 10 GeV/c momentum over a 10 m flight path. Cherenkov photons, produced in a quartz plate of 10 mm thickness, are focused onto an array of micro-channel plate photomultipliers (MCP-PMTs) which measure the photon arrival times and spatial positions. A half-scale ($660\times1250\times10$ mm$^3$) TORCH demonstrator module has been tested in an 8 GeV/c mixed proton-pion beam at CERN. Customised square MCP-PMTs of active area $53\times53$ mm$^2$ and granularity $64\times64$ pixels have been employed, which have been developed in collaboration with an industrial partner. The single-photon timing performance and photon yields have been measured as a function of beam position in the radiator, giving measurements which are consistent with expectations. The expected performance of TORCH for high luminosity running of the LHCb Upgrade II has been simulated.
△ Less
Submitted 8 November, 2021;
originally announced November 2021.
-
KLEVER: An experiment to measure \boldmath{${\rm BR}(K_L \to π^0 ν\overlineν)$} at the CERN SPS
Authors:
M. W. U. van Dijk
Abstract:
The KLEVER experiment aims to measure ${\rm BR}(K_L \to π^0 ν\overlineν)$, supplementing the ongoing NA62 measurement of ${\rm BR}(K^+ \to π^+ ν\overlineν)$, to provide new input on CKM unitarity and potentially new physics. KLEVER is undergoing continuous development, with particular efforts focused on the design of the target and the beamline. As described here, adaptations are required relative…
▽ More
The KLEVER experiment aims to measure ${\rm BR}(K_L \to π^0 ν\overlineν)$, supplementing the ongoing NA62 measurement of ${\rm BR}(K^+ \to π^+ ν\overlineν)$, to provide new input on CKM unitarity and potentially new physics. KLEVER is undergoing continuous development, with particular efforts focused on the design of the target and the beamline. As described here, adaptations are required relative to the K12 beamline in its current format, and a series of simulations has been performed to ensure that an adequate particle flux can be achieved while simultaneously suppressing problematic backgrounds.
△ Less
Submitted 20 March, 2019;
originally announced March 2019.
-
Summary and Conclusions of the 'JRA Beam Telescope 2025'-Forum at the 6th Beam Telescopes and Test Beams Workshop
Authors:
J. Dreyling-Eschweiler,
H. Jansen,
M. S. Amjad,
J. -H. Arling,
T. Coates,
A. Dätwyler,
D. Dannheim,
M. W. U. van Dijk,
T. Eichhorn,
A. Gerbershagen,
O. Girard,
B. Gkotse,
F. J. Iguaz,
J. Kroll,
C. Nellist,
F. Ravotti,
E. Rossi,
A. Rummler,
F. Salvatore,
S. Spannagel,
M. Weers,
J. Weingarten
Abstract:
On January 17th 2018, a forum on a possible Joint Research Activity on a future common Beam Telescope was held during the 6th Beam Telescopes and Test Beams Workshop (BTTB) in Zurich, Switzerland. The BTTB workshop aims at bringing together the community involved in beam tests. It therefore offers a suitable platform to induce community-wide discussions. The forum and its discussions were well rec…
▽ More
On January 17th 2018, a forum on a possible Joint Research Activity on a future common Beam Telescope was held during the 6th Beam Telescopes and Test Beams Workshop (BTTB) in Zurich, Switzerland. The BTTB workshop aims at bringing together the community involved in beam tests. It therefore offers a suitable platform to induce community-wide discussions. The forum and its discussions were well received and the participants concluded that appropriate actions should be undertaken promptly. Specific hardware and software proposals were discussed, with an emphasis on improving current common EUDET-type telescopes based on Mimosa26 sensors towards higher trigger rate capabilities in convolution with considerably improved time resolution. EUDAQ as a common top level DAQ and its modular structure is ready for future hardware. EUTelescope fulfils many requirements of a common reconstruction framework, but has also various drawbacks. Thus, requirements for a new common reconstruction framework were collected. A new common beam telescope evolves with the sensor decision and the whole package including a reconstruction framework depends on that decision.
△ Less
Submitted 8 January, 2019; v1 submitted 24 May, 2018;
originally announced May 2018.