Showing 1–50 of 122 results for author: team, M

First demonstration of Super-X divertor exhaust control for transient heat load management in compact fusion reactors

Authors: B. Kool, K. Verhaegh, G. L. Derks, T. A. Wijkamp, N. Lonigro, R. Doyle, G. McArdle, C. Vincent, J. Lovell, F. Federici, S. S. Henderson, R. T. Osawa, D. Brida, H. Reimerdes, M. van Berkel, The EUROfusion tokamak exploitation team, the MAST-U team

Abstract: Nuclear fusion could offer clean, abundant energy. However, managing the immense power exhausted from the core fusion plasma towards the divertor remains a major challenge. This is compounded in emerging compact reactor designs which promise more cost-effective pathways towards commercial fusion energy. Alternative divertor configurations (ADCs) are a potential solution to this challenge. In this… ▽ More Nuclear fusion could offer clean, abundant energy. However, managing the immense power exhausted from the core fusion plasma towards the divertor remains a major challenge. This is compounded in emerging compact reactor designs which promise more cost-effective pathways towards commercial fusion energy. Alternative divertor configurations (ADCs) are a potential solution to this challenge. In this work, we demonstrate exhaust control in ADCs for the first time, on MAST-U. We employ a novel diagnostic strategy for the neutral gas buffer which shields the target. Our work shows that ADCs tackle key risks and uncertainties in realising fusion energy: 1) an enlarged operating window which 2) improves exhaust control through the absorption of transients which can remove the neutral shield and damage the divertor, 3) isolation of each divertor from other reactor regions, enabling combined control. This showcases real-world benefits of alternative divertors for effective heat load management and control in reactors. △ Less

Submitted 10 July, 2024; originally announced July 2024.

First Ion Temperature Measurements in the MAST-U Divertor via Retarding Field Energy Analyzer

Authors: Y. Damizia, S. Elmore, P. Ryan, S. Allan, F. Federici, N. Osborne, J. W. Bradley, the MAST-U Team

Abstract: This study presents the first ion temperature (\(T_i\)) measurements from the MAST-U divertor using a Retarding Field Energy Analyzer (RFEA). Embedded within the flat tile of the closed divertor chamber, the RFEA captures \(T_i\) profiles across various plasma scenarios, including transitions to the Super-X configuration. Measurements were conducted under steady-state and transient plasma conditio… ▽ More This study presents the first ion temperature (\(T_i\)) measurements from the MAST-U divertor using a Retarding Field Energy Analyzer (RFEA). Embedded within the flat tile of the closed divertor chamber, the RFEA captures \(T_i\) profiles across various plasma scenarios, including transitions to the Super-X configuration. Measurements were conducted under steady-state and transient plasma conditions characterized by a plasma current (\(I_p\)) of 750 kA, electron density (\(n_e\)) between \(2.2 \times 10^{19}\) and \(4.45 \times 10^{19}\,\text{m}^{-3}\), and Neutral Beam Injection (NBI) power ranging from 3.0 MW to 3.2 MW. The ion temperatures, peaking at approximately 20 eV in steady state, were compared with electron temperatures (\(T_e\)) obtained from Langmuir probes (LP) at identical radial positions. The study also examined ion saturation current density (\(J_{\text{sat}}\)) signals to using methodologies similar to previous MAST experiments. Preliminary findings reveal a \(T_i/T_e\) ratio ranging from 1 to 2.5. Additionally, high temporal resolution measurements (100 $μs$) captured the dynamics of Edge Localized Modes (ELMs), showing \(T_i\) peaks at 16.03 +- 1.84 eV during ELM events, nearly three times higher than inter-ELM temperatures. △ Less

Submitted 1 July, 2024; originally announced July 2024.

A Contact Binary Satellite of the Asteroid (152830) Dinkinesh

Authors: Harold F. Levison, Simone Marchi, Keith S. Noll, John R. Spencer, Thomas S. Statler, the Lucy mission team

Abstract: Asteroids with diameters less than about 5 km have complex histories because they are small enough for radiative torques, YORP, to be a notable factor in their evolution. (152830) Dinkinesh is a small asteroid orbiting the Sun near the inner edge of the Main Asteroid Belt with a heliocentric semimajor axis of 2.19 AU; its S type spectrum is typical of bodies in this part of the Main Belt. Here we… ▽ More Asteroids with diameters less than about 5 km have complex histories because they are small enough for radiative torques, YORP, to be a notable factor in their evolution. (152830) Dinkinesh is a small asteroid orbiting the Sun near the inner edge of the Main Asteroid Belt with a heliocentric semimajor axis of 2.19 AU; its S type spectrum is typical of bodies in this part of the Main Belt. Here we report observations by the Lucy spacecraft as it passed within 431 km of Dinkinesh. Lucy revealed Dinkinesh, which has an effective diameter of only $\sim$720 m, to be unexpectedly complex. Of particular note is the presence of a prominent longitudinal trough overlain by a substantial equatorial ridge, and the discovery of the first confirmed contact binary satellite, now named (152830) Dinkinesh I Selam. Selam consists of two near-equal sized lobes with diameters of $\sim$210 m and $\sim$230 m. It orbits Dinkinesh at a distance of 3.1 km with an orbital period of about 52.7 hr, and is tidally locked. The dynamical state, angular momentum, and geomorphologic observations of the system lead us to infer that the ridge and trough of Dinkinesh are probably the result of mass failure resulting from spin-up by YORP followed by the partial reaccretion of the shed material. Selam probably accreted from material shed by this event. △ Less

Submitted 27 June, 2024; originally announced June 2024.

Comments: 25 pages, 5 figures

AI-native Memory: A Pathway from LLMs Towards AGI

Authors: **gbo Shang, Zai Zheng, Xiang Ying, Felix Tao, Mindverse Team

Abstract: Large language models (LLMs) have demonstrated the world with the sparks of artificial general intelligence (AGI). One opinion, especially from some startups working on LLMs, argues that an LLM with nearly unlimited context length can realize AGI. However, they might be too optimistic about the long-context capability of (existing) LLMs -- (1) Recent literature has shown that their effective conte… ▽ More Large language models (LLMs) have demonstrated the world with the sparks of artificial general intelligence (AGI). One opinion, especially from some startups working on LLMs, argues that an LLM with nearly unlimited context length can realize AGI. However, they might be too optimistic about the long-context capability of (existing) LLMs -- (1) Recent literature has shown that their effective context length is significantly smaller than their claimed context length; and (2) Our reasoning-in-a-haystack experiments further demonstrate that simultaneously finding the relevant information from a long context and conducting (simple) reasoning is nearly impossible. In this paper, we envision a pathway from LLMs to AGI through the integration of \emph{memory}. We believe that AGI should be a system where LLMs serve as core processors. In addition to raw data, the memory in this system would store a large number of important conclusions derived from reasoning processes. Compared with retrieval-augmented generation (RAG) that merely processing raw data, this approach not only connects semantically related information closer, but also simplifies complex inferences at the time of querying. As an intermediate stage, the memory will likely be in the form of natural language descriptions, which can be directly consumed by users too. Ultimately, every agent/person should have its own large personal model, a deep neural network model (thus \emph{AI-native}) that parameterizes and compresses all types of memory, even the ones cannot be described by natural languages. Finally, we discuss the significant potential of AI-native memory as the transformative infrastructure for (proactive) engagement, personalization, distribution, and social in the AGI era, as well as the incurred privacy and security challenges with preliminary solutions. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Reconfiguration Algorithms for Cubic Modular Robots with Realistic Movement Constraints

Authors: MIT--NASA Space Robots Team, Josh Brunner, Kenneth C. Cheung, Erik D. Demaine, Jenny Diomidova, Christine Gregg, Della H. Hendrickson, Irina Kostitsyna

Abstract: We introduce and analyze a model for self-reconfigurable robots made up of unit-cube modules. Compared to past models, our model aims to newly capture two important practical aspects of real-world robots. First, modules often do not occupy an exact unit cube, but rather have features like bumps extending outside the allotted space so that modules can interlock. Thus, for example, our model forbids… ▽ More We introduce and analyze a model for self-reconfigurable robots made up of unit-cube modules. Compared to past models, our model aims to newly capture two important practical aspects of real-world robots. First, modules often do not occupy an exact unit cube, but rather have features like bumps extending outside the allotted space so that modules can interlock. Thus, for example, our model forbids modules from squeezing in between two other modules that are one unit distance apart. Second, our model captures the practical scenario of many passive modules assembled by a single robot, instead of requiring all modules to be able to move on their own. We prove two universality results. First, with a supply of auxiliary modules, we show that any connected polycube structure can be constructed by a carefully aligned plane sweep. Second, without additional modules, we show how to construct any structure for which a natural notion of external feature size is at least a constant; this property largely consolidates forbidden-pattern properties used in previous works on reconfigurable modular robots. △ Less

Submitted 24 May, 2024; originally announced May 2024.

Effect of detachment on Magnum-PSI ELM-like pulses: I. Direct observations and qualitative results

Authors: Fabio Federici, Bruce Lipschultz, Gijs R. A. Akkermans, Kevin Verhaegh, Matthew L. Reinke, Ivo G. J. Classen, Magnum-PSI Team

Abstract: Conditions similar to those at the end of the divertor leg in a tokamak were replicated in the linear plasma machine Magnum-PSI. The neutral pressure in the target chamber is then increased to cause the target to transition from an attached to a detached state. Superimposed to this steady state regime, ELM-like pulses are reproduced, resulting in a sudden increase in plasma temperature and density… ▽ More Conditions similar to those at the end of the divertor leg in a tokamak were replicated in the linear plasma machine Magnum-PSI. The neutral pressure in the target chamber is then increased to cause the target to transition from an attached to a detached state. Superimposed to this steady state regime, ELM-like pulses are reproduced, resulting in a sudden increase in plasma temperature and density, such that the heat flux increases transiently by half an order of magnitude. Visible light emission, target thermography, and Thomson scattering are used to demonstrate that the higher the neutral pressure the more energy is removed from the ELM-like pulse in the volume. If the neutral pressure is sufficiently high, the ELM-like pulse can be prevented from affecting the target and the plasma energy is fully dissipated in the volume instead (ID 4 in Table 1). The visible light images allow the division of the ELM-plasma interaction process of ELM energy dissipation into 3 "stages" ranging from no dissipation to full dissipation (the target plasma is detached). In the second publication related to this study, spectroscopic data is analysed with a Bayesian approach, to acquire insights into the significance of molecular processes in dissipating the plasma energy and particles. △ Less

Submitted 30 April, 2024; originally announced April 2024.

Comments: 16 pages, 17 figures, Submitted to Nuclear Fusion

First 2D electron density measurements using Coherence Imaging Spectroscopy in the MAST-U Super-X divertor

Authors: N. Lonigro, R. Doyle, J. S. Allcock, B. Lipschultz, K. Verhaegh, C. Bowman, D. Brida, J. Harrison, O. Myatra, S. Silburn, C. Theiler, T. A. Wijkamp, MAST-U Team, the EUROfusion Tokamak Exploitation Team

Abstract: 2D profiles of electron density and neutral temperature are inferred from multi-delay Coherence Imaging Spectroscopy data of divertor plasmas using a non-linear inversion technique. The inference is based on imaging the spectral line-broadening of Balmer lines and can differentiate between the Doppler and Stark broadening components by measuring the fringe contrast at multiple interferometric dela… ▽ More 2D profiles of electron density and neutral temperature are inferred from multi-delay Coherence Imaging Spectroscopy data of divertor plasmas using a non-linear inversion technique. The inference is based on imaging the spectral line-broadening of Balmer lines and can differentiate between the Doppler and Stark broadening components by measuring the fringe contrast at multiple interferometric delays simultaneously. The model has been applied to images generated from simulated density profiles to evaluate its performance. Typical mean absolute errors of 30 percent are achieved, which are consistent with Monte Carlo uncertainty propagation accounting for noise, uncertainties in the calibrations, and in the model inputs. The analysis has been tested on experimental data from the MAST-U Super-X divertor, where it infers typical electron densities of 2-3 $10^{19}$ m$^{-3}$ and neutral temperatures of 0-2 eV during beam-heated L-mode discharges. The results are shown to be in reasonable agreement with the other available diagnostics. △ Less

Submitted 18 April, 2024; originally announced April 2024.

Effect of detachment on Magnum-PSI ELM-like pulses: II. Spectroscopic analysis and role of molecular assisted reactions

Authors: Fabio Federici, Bruce Lipschultz, Gijs R. A. Akkermans, Kevin Verhaegh, Matthew L. Reinke, Ray Chandra, Chris Bowman, Ivo G. J. Classen, the Magnum-PSI Team

Abstract: The linear plasma machine Magnum-PSI can replicate similar conditions to those found in a tokamak at the end of the divertor leg. A dedicated capacitor bank, in parallel to the plasma source, can release a sudden burst of energy, leading to a rapid increase in plasma temperature and density, resulting in a transient heat flux increase of half of an order of magnitude, a so called ELM-like pulse. T… ▽ More The linear plasma machine Magnum-PSI can replicate similar conditions to those found in a tokamak at the end of the divertor leg. A dedicated capacitor bank, in parallel to the plasma source, can release a sudden burst of energy, leading to a rapid increase in plasma temperature and density, resulting in a transient heat flux increase of half of an order of magnitude, a so called ELM-like pulse. Throughout both the steady state and the pulse, the neutral pressure in the target chamber is then increased, causing the target to transition from an attached to a detached state. In the first paper related to this study\cite{Federici} direct measurements of the plasma properties are used to qualitatively determine the effect of detachment on the ELM-like pulse. This is used to show the importance of molecular assisted reactions. Molecular processes, and especially molecular activated dissociation, are found to be important in the exchange of potential energy with the plasma, while less so in radiating the energy from the ELM-like pulse. At low target chamber pressure, the plasma generated via ionisation during the part of the ELM-like pulse with the higher temperature is more than that produced by the plasma source, a unique case in linear machines. At high target chamber pressure molecular activated recombination contributes up to a third of the total recombination rate, contributing to the reduction of the target particle flux. Some metrics that estimate the energy lost by the plasma per interactions with neutrals, potentially relevant for the portion of the tokamak divertor leg below $\sim10eV$, are then tentatively obtained. △ Less

Submitted 26 December, 2023; originally announced December 2023.

Comments: 25 pages, 22 figures. To be published in Nuclear Fusion. This paper is the second related to a single experimental session, the first is: "Effect of detachment on Magnum-PSI ELM-like pulses: I. Direct observations and qualitative results", to be published in Nuclear Fusion

Plasma Surrogate Modelling using Fourier Neural Operators

Authors: Vignesh Gopakumar, Stanislas Pamela, Lorenzo Zanisi, Zongyi Li, Ander Gray, Daniel Brennand, Nitesh Bhatia, Gregory Stathopoulos, Matt Kusner, Marc Peter Deisenroth, Anima Anandkumar, JOREK Team, MAST Team

Abstract: Predicting plasma evolution within a Tokamak reactor is crucial to realizing the goal of sustainable fusion. Capabilities in forecasting the spatio-temporal evolution of plasma rapidly and accurately allow us to quickly iterate over design and control strategies on current Tokamak devices and future reactors. Modelling plasma evolution using numerical solvers is often expensive, consuming many hou… ▽ More Predicting plasma evolution within a Tokamak reactor is crucial to realizing the goal of sustainable fusion. Capabilities in forecasting the spatio-temporal evolution of plasma rapidly and accurately allow us to quickly iterate over design and control strategies on current Tokamak devices and future reactors. Modelling plasma evolution using numerical solvers is often expensive, consuming many hours on supercomputers, and hence, we need alternative inexpensive surrogate models. We demonstrate accurate predictions of plasma evolution both in simulation and experimental domains using deep learning-based surrogate modelling tools, viz., Fourier Neural Operators (FNO). We show that FNO has a speedup of six orders of magnitude over traditional solvers in predicting the plasma dynamics simulated from magnetohydrodynamic models, while maintaining a high accuracy (MSE in the normalised domain $\approx$ $10^{-5}$). Our modified version of the FNO is capable of solving multi-variable Partial Differential Equations (PDE), and can capture the dependence among the different variables in a single model. FNOs can also predict plasma evolution on real-world experimental data observed by the cameras positioned within the MAST Tokamak, i.e., cameras looking across the central solenoid and the divertor in the Tokamak. We show that FNOs are able to accurately forecast the evolution of plasma and have the potential to be deployed for real-time monitoring. We also illustrate their capability in forecasting the plasma shape, the locations of interactions of the plasma with the central solenoid and the divertor for the full (available) duration of the plasma shot within MAST. The FNO offers a viable alternative for surrogate modelling as it is quick to train and infer, and requires fewer data points, while being able to do zero-shot super-resolution and getting high-fidelity solutions. △ Less

Submitted 18 June, 2024; v1 submitted 10 November, 2023; originally announced November 2023.

Journal ref: Nucl. Fusion 64 056025 (2024)

The Near-Earth Object Surveyor Mission

Authors: A. K. Mainzer, Joseph R. Masiero, Paul A. Abell, J. M. Bauer, William Bottke, Bonnie J. Buratti, Sean J. Carey, D. Cotto-Figueroa, R. M. Cutri, D. Dahlen, Peter R. M. Eisenhardt, 6 Y. R. Fernandez, Roberto Furfaro, Tommy Grav, T. L. Hoffman, Michael S. Kelley, Yoonyoung Kim, J. Davy Kirkpatrick, Christopher R. Lawler, Eva Lilly, X. Liu, Federico Marocco, K. A. Marsh, Frank J. Masci, Craig W. McMurtry , et al. (12 additional authors not shown)

Abstract: The Near-Earth Object (NEO) Surveyor mission is a NASA observatory designed to discover and characterize near-Earth asteroids and comets. The mission's primary objective is to find the majority of objects large enough to cause severe regional impact damage ($>$140 m in effective spherical diameter) within its five-year baseline survey. Operating at the Sun-Earth L1 Lagrange point, the mission will… ▽ More The Near-Earth Object (NEO) Surveyor mission is a NASA observatory designed to discover and characterize near-Earth asteroids and comets. The mission's primary objective is to find the majority of objects large enough to cause severe regional impact damage ($>$140 m in effective spherical diameter) within its five-year baseline survey. Operating at the Sun-Earth L1 Lagrange point, the mission will survey to within 45 degrees of the Sun in an effort to find the objects in the most Earth-like orbits. The survey cadence is optimized to provide observational arcs long enough to reliably distinguish near-Earth objects from more distant small bodies that cannot pose an impact hazard. Over the course of its survey, NEO Surveyor will discover $\sim$200,000 - 300,000 new NEOs down to sizes as small as $\sim$10 m and thousands of comets, significantly improving our understanding of the probability of an Earth impact over the next century. △ Less

Submitted 19 October, 2023; originally announced October 2023.

Comments: accepted to PSJ

The Scientific Performance of the MoonBurst Energetics All-sky Monitor(MoonBEAM)

Authors: C. Fletcher, C. M. Hui, A. Goldstein, The MoonBEAM Team

Abstract: MoonBEAM is a SmallSat concept placed in cislunar orbit developed to study the progenitors and multimessenger/multiwavelength signals of transient relativistic jets and outflows and determine the conditions that lead to the launching of a transient relativistic jet. The advantage of MoonBEAM is the instantaneous all-sky coverage due to its orbit, which maximizes the gamma-raytransient observations… ▽ More MoonBEAM is a SmallSat concept placed in cislunar orbit developed to study the progenitors and multimessenger/multiwavelength signals of transient relativistic jets and outflows and determine the conditions that lead to the launching of a transient relativistic jet. The advantage of MoonBEAM is the instantaneous all-sky coverage due to its orbit, which maximizes the gamma-raytransient observations and provides upperlimits for non-detections. Earth blockage and detector downtime from the high particle activity in the South Atlantic Anomaly region prevent gamma-ray observatories in low Earth orbit from surveying the entire sky at a given time. In addition, the long baseline provided from a cislunar orbit allows MoonBEAM to constrain the localization annulus when combined with a gamma-ray instrument in low Earth orbit utilizing the timing triangulation technique. We present the scientific performance of MoonBEAM including the expected effective area, localization ability and duty cycle. MoonBEAM provides many advantages to the gamma-ray and gravitational-wave follow up community by reducing the search region needed to identify the afterglow and kilanova emission. In addition, the all-sky coverage will provide insight into the conditions that lead to a successful relativistic jet, instead of a shock breakout event, or a completely failed jet in the case of core collapse supernovae. △ Less

Submitted 30 August, 2023; originally announced August 2023.

Comments: ICRC Conference Proceedings

A Joint Fermi-GBM and Swift-BAT Analysis of Gravitational-Wave Candidates from the Third Gravitational-wave Observing Run

Authors: C. Fletcher, J. Wood, R. Hamburg, P. Veres, C. M. Hui, E. Bissaldi, M. S. Briggs, E. Burns, W. H. Cleveland, M. M. Giles, A. Goldstein, B. A. Hristov, D. Kocevski, S. Lesage, B. Mailyan, C. Malacaria, S. Poolakkil, A. von Kienlin, C. A. Wilson-Hodge, The Fermi Gamma-ray Burst Monitor Team, M. Crnogorčević, J. DeLaunay, A. Tohuvavohu, R. Caputo, S. B. Cenko , et al. (1674 additional authors not shown)

Abstract: We present Fermi Gamma-ray Burst Monitor (Fermi-GBM) and Swift Burst Alert Telescope (Swift-BAT) searches for gamma-ray/X-ray counterparts to gravitational wave (GW) candidate events identified during the third observing run of the Advanced LIGO and Advanced Virgo detectors. Using Fermi-GBM on-board triggers and sub-threshold gamma-ray burst (GRB) candidates found in the Fermi-GBM ground analyses,… ▽ More We present Fermi Gamma-ray Burst Monitor (Fermi-GBM) and Swift Burst Alert Telescope (Swift-BAT) searches for gamma-ray/X-ray counterparts to gravitational wave (GW) candidate events identified during the third observing run of the Advanced LIGO and Advanced Virgo detectors. Using Fermi-GBM on-board triggers and sub-threshold gamma-ray burst (GRB) candidates found in the Fermi-GBM ground analyses, the Targeted Search and the Untargeted Search, we investigate whether there are any coincident GRBs associated with the GWs. We also search the Swift-BAT rate data around the GW times to determine whether a GRB counterpart is present. No counterparts are found. Using both the Fermi-GBM Targeted Search and the Swift-BAT search, we calculate flux upper limits and present joint upper limits on the gamma-ray luminosity of each GW. Given these limits, we constrain theoretical models for the emission of gamma-rays from binary black hole mergers. △ Less

Submitted 25 August, 2023; originally announced August 2023.

Cometary dust collected by MIDAS on board Rosetta II. Particle shape descriptors and pristineness evaluation

Authors: M. Kim, T. Mannel, J. Lasue, A. Longobardo, M. S. Bentley, R. Moissl, the MIDAS team

Abstract: The MIDAS (Micro-Imaging Dust Analysis System) atomic force microscope on board the Rosetta comet orbiter investigated and measured the 3D topography of a few hundred nm to tens of $μ$m sized dust particles of 67P/Churyumov-Gerasimenko with resolutions down to a few nanometers, giving insights into the physical processes of our early Solar System. We analyze the shapes of the cometary dust particl… ▽ More The MIDAS (Micro-Imaging Dust Analysis System) atomic force microscope on board the Rosetta comet orbiter investigated and measured the 3D topography of a few hundred nm to tens of $μ$m sized dust particles of 67P/Churyumov-Gerasimenko with resolutions down to a few nanometers, giving insights into the physical processes of our early Solar System. We analyze the shapes of the cometary dust particles collected by MIDAS on the basis of a recently updated particle catalog with the aim to determine which structural properties remained pristine. We develop a set of shape descriptors and metrics such as aspect ratio, elongation, circularity, convexity, and particle surface/volume distribution, which can be used to describe the distribution of particle shapes. Furthermore, we compare the structure of the MIDAS dust particles and the clusters in which the particles were deposited to those found in previous laboratory experiments and by Rosetta/COSIMA. Finally, we combine our findings to calculate a pristineness score for MIDAS particles and determine the most pristine particles and their properties. We find that the morphological properties of all cometary dust particles at the micrometer scale are surprisingly homogeneous despite originating from diverse cometary environments (e.g., different collection targets that are associated with cometary activities/source regions and collection velocities/periods). We next find that the types of clusters found by MIDAS show good agreement with those defined by previous laboratory experiments, however, there are some differences to those found by Rosetta/COSIMA. Based on our result, we rate 19 out of 1082 MIDAS particles at least moderately pristine, i.e., they are not substantially flattened by impact, not fragmented, and/or not part of a fragmentation cluster. △ Less

Submitted 17 August, 2023; v1 submitted 10 August, 2023; originally announced August 2023.

Comments: 40 pages, 31 figures, 1 online table

Journal ref: A&A 678, A179 (2023)

The Maunakea Spectroscopic Explorer: Thousands of Fibers, Infinite Possibilities

Authors: Andrew Sheinis, Samuel C. Barden, Jennifer Sobeck, The MSE Team

Abstract: The Maunakea Spectroscopic Explorer (MSE) is a massively multiplexed spectroscopic survey facility that will replace the Canada-France-Hawaii Telescope over the next two decades. This 12.5-meter telescope, with its 1.5 square degree field-of-view, will observe 18,000-20,000 astronomical targets in every pointing from 0.36-1.80 microns at low/moderate resolution (R~3,000, 6,000) and from 0.36-0.90… ▽ More The Maunakea Spectroscopic Explorer (MSE) is a massively multiplexed spectroscopic survey facility that will replace the Canada-France-Hawaii Telescope over the next two decades. This 12.5-meter telescope, with its 1.5 square degree field-of-view, will observe 18,000-20,000 astronomical targets in every pointing from 0.36-1.80 microns at low/moderate resolution (R~3,000, 6,000) and from 0.36-0.90 microns at high resolution (R~30,000). Parallel positioning of all fibers in the field will occur, providing simultaneous full-field coverage for both resolution modes. Unveiling the composition and dynamics of the faint Universe, MSE will impact nearly every field of astrophysics across all spatial scales, from individual stars to the largest scale structures in the Universe, including (i) the ultimate Gaia follow-up facility for understanding the chemistry and dynamics of the distant Milky Way, including the distant halo at high spectral resolution, (ii) the unparalleled study of galaxy formation and evolution at cosmic noon, (iii) the determination of the neutrino mass, and (iv) the generation of insights into inflationary physics through a cosmological redshift survey that probes a large volume of the Universe with a high galaxy density. Initially, CFHT will build a Pathfinder instrument to fast-track the development of MSE technology while providing multi-object and IFU spectroscopic capability. △ Less

Submitted 14 July, 2023; originally announced July 2023.

Comments: 13 pages, 10 figures

X-ray/H$α$ scaling relationships in stellar flares

Authors: Hiroki Kawai, Yohko Tsuboi, Wataru B. Iwakiri, Yoshitomo Maeda, Satoru Katsuda, Ryo Sasaki, Junya Kohara, MAXI TEAM

Abstract: We report on the results of our simultaneous observations of three large stellar flares with soft X-rays (SXRs) and an H$\mathrmα$ emission line from two binary systems of RS CVn type. The energies released in the X-ray and H$\mathrmα$ emissions during the flares were $10^{36}$--$10^{38}$ and $10^{35}$--$10^{37}$ erg, respectively. It renders the set of the observations as the first successful sim… ▽ More We report on the results of our simultaneous observations of three large stellar flares with soft X-rays (SXRs) and an H$\mathrmα$ emission line from two binary systems of RS CVn type. The energies released in the X-ray and H$\mathrmα$ emissions during the flares were $10^{36}$--$10^{38}$ and $10^{35}$--$10^{37}$ erg, respectively. It renders the set of the observations as the first successful simultaneous X-ray/H$\mathrmα$ observations of the stellar flares with energies above $10^{35}$ erg; although the coverage of the H$\mathrmα$ observations of the stellar flares with energies above $10^{35}$ erg; although the coverage of the H$\mathrmα$ observations was limited, with $\sim$10\% of the $e$-folding time in the decay phase of the flares, that of the SXR ones was complete. Combining the obtained physical parameters and those in literature for solar and stellar flares, we obtained a good proportional relation between the emitted energies of X-ray and H$\mathrmα$ emissions for a flare energy range of $10^{29}$--$10^{38}$ erg. The ratio of the H$\mathrmα$-line to bolometric X-ray emissions was $\sim$0.1, where the latter was estimated by converting the observed SXR emission to that in the 0.1--100 keV band according to the best-fitting thin thermal model. We also found that the $e$-folding times of the SXR and H$\mathrmα$ light curves in the decaying phase of a flare are in agreement for a time range of $1$--$10^4$~s. Even very large stellar flares with energies of six orders of magnitude larger than the most energetic solar flares follow the same scaling relationships with solar and much less energetic stellar flares. This fact suggests that their physical parameters can be estimated on the basis of the known physics of solar and stellar flares. △ Less

Submitted 4 July, 2023; originally announced July 2023.

Comments: 12 pages, 7 figures

Journal ref: 2022PASJ...74..477K

Initial Fulcher band observations from high resolution spectroscopy in the MAST-U divertor

Authors: N. Osborne, K. Verhaegh, M. D. Bowden, T. Wijkamp, N. Lonigro, P. Ryan, E. Pawelec, B. Lipschultz, V. Soukhanovskii, T. van den Biggelaar, the MAST-U team

Abstract: High resolution Fulcher band spectroscopy was used in the MAST-U divertors during Super-X and elongated conventional divertor density ramps with $\text{D}_{2}$ fuelling from the mid-plane high-field side. In the Super-X case (density ramp from Greenwald fraction 0.12 to 0.24), the upper divertor showed ground state rotational temperatures of the $\text{D}_{2}$ molecules increasing from $\sim$6000… ▽ More High resolution Fulcher band spectroscopy was used in the MAST-U divertors during Super-X and elongated conventional divertor density ramps with $\text{D}_{2}$ fuelling from the mid-plane high-field side. In the Super-X case (density ramp from Greenwald fraction 0.12 to 0.24), the upper divertor showed ground state rotational temperatures of the $\text{D}_{2}$ molecules increasing from $\sim$6000 K, starting at the detachment onset, to $\sim$9000 K during deepening detachment. This was correlated with the movement of the Fulcher emission region, which is correlated with the ionisation source. The increase in rotational temperature did not occur near the divertor entrance, where the plasma was still ionising. Qualitative agreement was obtained between the lower and upper divertor. Similar rotational temperatures were obtained in the elongated divertor before the detachment onset, although the increase in rotational temperature during detachment was less clearly observed as less deep detachment was obtained. %In the elongated conventional divertor there was some qualitative agreement of this effect impeded by low signal. The measured vibrational distribution of the upper Fulcher state (first four bands) does not agree with a ground state Boltzmann distribution but shows a different characteristic with an elevated population especially in the $ν= 2$ and $ν= 3$ bands. The populations of the $ν= 2$ and $ν= 3$ band relative to the $ν= 0$ band are roughly proportional to the $\textit{rotational}$ temperature. △ Less

Submitted 25 July, 2023; v1 submitted 29 June, 2023; originally announced June 2023.

Intermittency of density fluctuations and zonal-flow generation in MAST edge plasmas

Authors: A. Sladkomedova, I. Cziegler, A. R. Field, A. A. Schekochihin, D. Dunai, P. G. Ivanov, the MAST-U Team, the EUROfusion MST1 Team

Abstract: The properties of the edge ion-scale turbulence are studied using the beam emission spectroscopy (BES) diagnostic on MAST. Evidence of the formation of large-scale high-amplitude coherent structures, filamentary density blobs and holes, 2$-$4 cm inside the plasma separatrix is presented. Measurements of radial velocity and skewness of the density fluctuations indicate that density holes propagate… ▽ More The properties of the edge ion-scale turbulence are studied using the beam emission spectroscopy (BES) diagnostic on MAST. Evidence of the formation of large-scale high-amplitude coherent structures, filamentary density blobs and holes, 2$-$4 cm inside the plasma separatrix is presented. Measurements of radial velocity and skewness of the density fluctuations indicate that density holes propagate radially inwards, with the skewness profile peaking at 7$-$10 cm inside the separatrix. Poloidal velocities of the density fluctuations measured using cross-correlation time delay estimation (CCTDE) are found to exhibit an intermittent behaviour. Zonal-flow analysis reveals the presence of poloidally symmetric coherent oscillations $-$ low-frequency (LF) zonal flows and geodesic acoustic modes (GAM). Shearing rates of the observed zonal flows are found to be comparable to the turbulence decorrelation rate. The observed bursts in density-fluctuation power are followed by quiescent periods with a transient increase in the power of sheared flows. Three-wave interactions between broadband turbulence and a GAM are illustrated using the autobispectral technique. It is shown that the zonal flows and the density-fluctuation field are nonlinearly coupled and LF zonal flows mediate the energy transfer from high- to low-frequency density fluctuations. △ Less

Submitted 21 December, 2023; v1 submitted 11 June, 2023; originally announced June 2023.

Cometary dust collected by MIDAS on board Rosetta. I. Dust particle catalog and statistics

Authors: M. Kim, T. Mannel, P. D. Boakes, M. S. Bentley, A. Longobardo, H. Jeszenszky, R. Moissl, the MIDAS team

Abstract: We aim to catalog all dust particles collected and analyzed by MIDAS, together with their main statistical properties such as size, height, basic shape descriptors, and collection time. Furthermore, we aim to present the scientific results that can be extracted from the catalog (e.g., the size distribution and statistical characteristics of cometary dust particles). The existing MIDAS particle cat… ▽ More We aim to catalog all dust particles collected and analyzed by MIDAS, together with their main statistical properties such as size, height, basic shape descriptors, and collection time. Furthermore, we aim to present the scientific results that can be extracted from the catalog (e.g., the size distribution and statistical characteristics of cometary dust particles). The existing MIDAS particle catalog has been greatly improved by a careful re-analysis of the AFM images, leading to the addition of more dust particles and a detailed description of the particle properties. The catalog documents all images of identified dust particles and includes a variety of derived information tabulated one record per particle. Furthermore, the best image of each particle was chosen for subsequent studies. Finally, we created dust coverage maps and clustering maps of the MIDAS collection targets and traced any possible fragmentation of collected particles with a detailed algorithm. The revised MIDAS catalog includes 3523 MIDAS particles in total, where 1857 particles are expected to be usable for further analysis (418 scans of particles before perihelion + 1439 scans of particles after perihelion, both after the removal of duplicates), ranging from about 40 nm to about 8 $μ$m in size. The mean value of the equivalent radius derived from the 2D projection of the particles is 0.91 ${\pm}$ 0.79 $μ$m. A slightly improved equivalent radius based on the particle's volume coincides in the range of uncertainties with a value of 0.56 ${\pm}$ 0.45 $μ$m. We note that those sizes and all following MIDAS particle size distributions are expected to be influenced by the fragmentation of MIDAS particles upon impact on the collection targets. Furthermore, fitting the slope of the MIDAS particle size distribution with a power law of a r ${^b}$ yields an index b of ${\sim}$ -1.67 to -1.88. △ Less

Submitted 17 March, 2023; v1 submitted 21 February, 2023; originally announced February 2023.

Comments: 28 pages, 5 figure, 2 online tables

Report number: 673, A129

Journal ref: A&A 673, A129 (2023)

Fourier Neural Operator for Plasma Modelling

Authors: Vignesh Gopakumar, Stanislas Pamela, Lorenzo Zanisi, Zongyi Li, Anima Anandkumar, MAST Team

Abstract: Predicting plasma evolution within a Tokamak is crucial to building a sustainable fusion reactor. Whether in the simulation space or within the experimental domain, the capability to forecast the spatio-temporal evolution of plasma field variables rapidly and accurately could improve active control methods on current tokamak devices and future fusion reactors. In this work, we demonstrate the util… ▽ More Predicting plasma evolution within a Tokamak is crucial to building a sustainable fusion reactor. Whether in the simulation space or within the experimental domain, the capability to forecast the spatio-temporal evolution of plasma field variables rapidly and accurately could improve active control methods on current tokamak devices and future fusion reactors. In this work, we demonstrate the utility of using Fourier Neural Operator (FNO) to model the plasma evolution in simulations and experiments. Our work shows that the FNO is capable of predicting magnetohydrodynamic models governing the plasma dynamics, 6 orders of magnitude faster than the traditional numerical solver, while maintaining considerable accuracy (NMSE $\sim 10^{-5})$. Our work also benchmarks the performance of the FNO against other standard surrogate models such as Conv-LSTM and U-Net and demonstrate that the FNO takes significantly less time to train, requires less parameters and outperforms other models. We extend the FNO approach to model the plasma evolution observed by the cameras positioned within the MAST spherical tokamak. We illustrate its capability in forecasting the formation of filaments within the plasma as well as the heat deposits. The FNO deployed to model the camera is capable of forecasting the full length of the plasma shot within half the time of the shot duration. △ Less

Submitted 13 February, 2023; originally announced February 2023.

Probing non-linear MHD stability of the EDA H-mode in ASDEX Upgrade

Authors: A Cathey, M Hoelzl, L Gil, MG Dunne, GF Harrer, GTA Huijsmans, J Kalis, K Lackner, SJP Pamela, E Wolfrum, S Günter, the JOREK team, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: Regimes of operation in tokamaks that are devoid of large ELMs have to be better understood to extrapolate their applicability to reactor-relevant devices. This paper describes non-linear extended MHD simulations that use an experimental equilibrium from an EDA H-mode in ASDEX Upgrade. Linear ideal MHD analysis indicates that the operational point lies slightly inside of the stable region. The non… ▽ More Regimes of operation in tokamaks that are devoid of large ELMs have to be better understood to extrapolate their applicability to reactor-relevant devices. This paper describes non-linear extended MHD simulations that use an experimental equilibrium from an EDA H-mode in ASDEX Upgrade. Linear ideal MHD analysis indicates that the operational point lies slightly inside of the stable region. The non-linear simulations with the visco-resistive extended MHD code, JOREK, sustain non-axisymmetric perturbations that are linearly most unstable with toroidal mode numbers of n = \{6 \dots 9\}, but non-linearly higher and lower n become driven and the low-n become dominant. The poloidal mode velocity during the linear phase is found to correspond to the expected velocity for resistive ballooning modes. The perturbations that exist in the simulations have somewhat smaller poloidal wavenumbers (k_θ \sim 0.1 to 0.5 cm^{-1} ) than the experimental expectations for the quasi-coherent mode in EDA, and cause non-negligible transport in both the heat and particle channels. In the transition from linear to non-linear phase, the mode frequency chirps down from approximately 35 kHz to 13 kHz, which corresponds approximately to the lower end of frequencies that are typically observed in EDA H-modes in ASDEX Upgrade. △ Less

Submitted 22 January, 2023; originally announced January 2023.

MHD simulations of formation, sustainment and loss of Quiescent H-mode in the all-tungsten ASDEX Upgrade

Authors: Lorenz Meier, Matthias Hoelzl, Andres Cathey, Guido Huijsmans, Eleonora Viezzer, Mike Dunne, Jan van Dijk, Diego José Cruz Zabala, Karl Lackner, Sibylle Günter, ASDEX Upgrade Team, EUROfusion MST1 Team, JOREK Team

Abstract: Periodic edge localized modes (ELMs) are the non-linear consequences of pressure-gradient-driven ballooning modes and current-driven peeling modes becoming unstable in the pedestal region of high confinement fusion plasmas. In future tokamaks like ITER, large ELMs are foreseen to severely affect the lifetime of wall components as they transiently deposit large amounts of heat onto a narrow region… ▽ More Periodic edge localized modes (ELMs) are the non-linear consequences of pressure-gradient-driven ballooning modes and current-driven peeling modes becoming unstable in the pedestal region of high confinement fusion plasmas. In future tokamaks like ITER, large ELMs are foreseen to severely affect the lifetime of wall components as they transiently deposit large amounts of heat onto a narrow region at the divertor targets. Several strategies exist for avoidance, suppression, or mitigation of these instabilities, such as the naturally ELM-free quiescent H-mode (QH-mode). In the present article, an ASDEX Upgrade equilibrium that features a QH-mode is investigated through non-linear extended MHD simulations covering the dynamics over tens of milliseconds. The equilibrium is close to the ideal peeling limit and non-linearly develops saturated modes at the edge of the plasma. A dominant toroidal mode number of $n=1$ is found, for which the characteristic features of the edge harmonic oscillation are recovered. The saturated modes contribute to heat and particle transport preventing pedestal build-up to the ELM triggering threshold. The non-linear dynamics of the mode, in particular its interaction with the evolution of the edge safety factor is studied, which suggest a possible new saturation mechanism for the QH-mode. The simulations show good qualitative and quantitative agreement to experiments in AUG. In particular, the processes leading to the termination of QH-mode above a density threshold is studied, which results in the transition into an ELM regime. In the vicinity of this threshold, limit cycle oscillations are observed. △ Less

Submitted 12 July, 2023; v1 submitted 18 January, 2023; originally announced January 2023.

Comments: Revised version with modifications from review process included

Journal ref: Nuclear Fusion 63, 086026 (2023)

The SLAC Linac to ESA (LESA) Beamline for Dark Sector Searches and Test Beams

Authors: Tom Markiewicz, Tor Raubenheimer, Natalia Toro, members of the LESA construction team

Abstract: The Linac to End Station A (LESA) beamline is being constructed at SLAC and will provide a near-CW beam of multi-GeV electrons to the SLAC End Station A for experiments in particle physics. The 1st half of LESA is ready for commissioning at the end of FY22 and the full beamline will be operational Q1 FY24. The low-current multi-GeV electron beam is produced parasitically by the superconducting RF… ▽ More The Linac to End Station A (LESA) beamline is being constructed at SLAC and will provide a near-CW beam of multi-GeV electrons to the SLAC End Station A for experiments in particle physics. The 1st half of LESA is ready for commissioning at the end of FY22 and the full beamline will be operational Q1 FY24. The low-current multi-GeV electron beam is produced parasitically by the superconducting RF (SRF) linac for the LCLS-II/LCLS-II-HE X-ray Free Electron Laser. LESA is designed to host experiments to detect light dark matter such as the Light Dark Matter eXperiment (LDMX) as well as a wide range of other experiments and test beams requiring near-CW electron currents ranging from pA to μA. △ Less

Submitted 18 July, 2022; v1 submitted 26 May, 2022; originally announced May 2022.

Comments: contribution to Snowmass 2021

Global gyrokinetic simulations of ASDEX Upgrade up to the transport time-scale with GENE-Tango

Authors: A. Di Siena, A. Banon Navarro, T. Luda, G. Merlo, M. Bergmann, L. Leppin, T. Goerler, J. B. Parker, L. LoDestro, J. Hittinger, B. Dorland, G. Hammett, F. Jenko, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: An accurate description of turbulence up to the transport time scale is essential for predicting core plasma profiles and enabling reliable calculations for designing advanced scenarios and future devices. Here, we exploit the gap separation between turbulence and transport time scales and couple the global gyrokinetic code GENE to the transport-solver Tango, including kinetic electrons, collision… ▽ More An accurate description of turbulence up to the transport time scale is essential for predicting core plasma profiles and enabling reliable calculations for designing advanced scenarios and future devices. Here, we exploit the gap separation between turbulence and transport time scales and couple the global gyrokinetic code GENE to the transport-solver Tango, including kinetic electrons, collisions, realistic geometries, toroidal rotation and electromagnetic effects for the first time. This approach overcomes gyrokinetic codes' limitations and enables high-fidelity profile calculations in experimentally relevant plasma conditions, significantly reducing the computational cost. We present numerical results of GENE-Tango for two ASDEX Upgrade discharges, one of which exhibits a pronounced peaking of the ion temperature profile not reproduced by TGLF-ASTRA. We show that GENE-Tango can correctly capture the ion temperature peaking observed in the experiment. By retaining different physical effects in the GENE simulations, e.g., collisions, toroidal rotation and electromagnetic effects, we demonstrate that the ion temperature profile's peaking is due to electromagnetic effects of submarginal MHD instability. Based on these results, the expected GENE-Tango speedup for the ITER standard scenario is larger than two orders of magnitude compared to a single gyrokinetic simulation up to the transport time scale, possibly making first-principles ITER simulations feasible on current computing resources. △ Less

Submitted 12 April, 2022; originally announced April 2022.

Spectroscopic investigations of detachment on the MAST Upgrade Super-X divertor

Authors: Kevin Verhaegh, Bruce Lipschultz, James Harrison, Nick Osborne, Aelwyn Williams, Peter Ryan, James Clark, Fabio Federici, Bob Kool, Tijs Wijkamp, Alexandre Fil, David Moulton, Omkar Myatra, Andrew Thornton, Thomas Bosman, Geof Cunningham, Basil Duval, Stuart Henderson, Rory Scannell, the MAST Upgrade team

Abstract: We present the first analysis of the atomic and molecular processes at play during detachment in the MAST-U Super-X divertor using divertor spectroscopy data. Our analysis indicates detachment in the MAST-U Super-X divertor can be separated into four sequential phases: First, the ionisation region detaches from the target at detachment onset leaving a region of increased molecular densities downst… ▽ More We present the first analysis of the atomic and molecular processes at play during detachment in the MAST-U Super-X divertor using divertor spectroscopy data. Our analysis indicates detachment in the MAST-U Super-X divertor can be separated into four sequential phases: First, the ionisation region detaches from the target at detachment onset leaving a region of increased molecular densities downstream. The plasma interacts with these molecules, resulting in molecular ions ($D_2^+$ and/or $D_2^- \rightarrow D + D^-$) that further react with the plasma leading to Molecular Activated Recombination and Dissociation (MAR and MAD), which results in excited atoms and significant Balmer line emission. Second, the MAR region detaches from the target leaving a sub-eV temperature region downstream. Third, an onset of strong emission from electron-ion recombination (EIR) ensues. Finally, the electron density decays near the target, resulting in a density front moving upstream. The analysis in this paper indicates that plasma-molecule interactions have a larger impact than previously reported and play a critical role in the intensity and interpretation of hydrogen atomic line emission characteristics on MAST-U. Furthermore, we find that the Fulcher band emission profile in the divertor can be used as a proxy for the ionisation region and may also be employed as a plasma temperature diagnostic for improving the separation of hydrogenic emission arising from electron-impact excitation and that from plasma-molecular interactions. We provide evidences for the presence of low electron temperatures ($<0.5$ eV) during detachment phases III-IV based on quantitative spectroscopy analysis, a Boltzmann relation of the high-n Balmer line transitions together with an analysis of the brightness of high-n Balmer lines. △ Less

Submitted 18 October, 2022; v1 submitted 5 April, 2022; originally announced April 2022.

Comparison between MAST-U conventional and Super-X configurations through SOLPS-ITER modelling

Authors: Alexandre Fil, Bruce Lipschultz, David Moulton, Andrew Thornton, Ben Dudson, Omkar Myatra, Kevin Verhaegh, EUROFusion MST1 team

Abstract: MAST-U has recently started operating with a Super-X divertor, designed to increase total flux expansion and neutral trap**, both predicted through simple analytic models and SOLPS calculations to reduce the plasma and impurity density detachment thresholds. In this study, utilising the SOLPS-ITER code, we are quantifying the possible gain allowed by the MAST-U Super-X and neutral baffling geome… ▽ More MAST-U has recently started operating with a Super-X divertor, designed to increase total flux expansion and neutral trap**, both predicted through simple analytic models and SOLPS calculations to reduce the plasma and impurity density detachment thresholds. In this study, utilising the SOLPS-ITER code, we are quantifying the possible gain allowed by the MAST-U Super-X and neutral baffling geometry, in terms of access to detachment. We show that a significant reduction of the upstream density detachment threshold (up to a factor 1.6) could be achieved in MAST-U, for the Super-X, as opposed to conventional divertor geometry, mainly through an increased total flux expansion, neutral trap** being found very similar between the different configurations. We also show that variations of the strike-point angle are complex to interpret in such a tightly baffled geometry, and that a case in which the target normal points more towards the separatrix does not necessarily imply a lower detachment threshold. As in previous calculations for TCV, we quantify the role of neutral effects through develo** and applying a quantitative definition of neutral trap**. △ Less

Submitted 13 July, 2022; v1 submitted 25 February, 2022; originally announced February 2022.

A quasi-continuous exhaust scenario for a fusion reactor: the renaissance of small edge localized modes

Authors: G. F. Harrer, M. Faitsch, L. Radovanovic, E. Wolfrum, C. Albert, A. Cathey, M. Cavedon, M. Dunne, T. Eich, R. Fischer, M. Hoelzl, B. Labit, H. Meyer, F. Aumayr, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: Tokamak operational regimes with small edge localized modes (ELMs) could be a solution to the problem of large transient heat loads in future fusion reactors because they provide quasi-continuous exhaust while kee** a good plasma confinement. A ballooning mode mechanism near the last closed flux surface (LCFS) governed by an interplay of the pressure gradient and the magnetic shear there has bee… ▽ More Tokamak operational regimes with small edge localized modes (ELMs) could be a solution to the problem of large transient heat loads in future fusion reactors because they provide quasi-continuous exhaust while kee** a good plasma confinement. A ballooning mode mechanism near the last closed flux surface (LCFS) governed by an interplay of the pressure gradient and the magnetic shear there has been proposed for small ELMs in high density ASDEX Upgrade and TCV discharges. In this manuscript we explore different factors relevant for plasma edge stability in a wide range of edge safety factors by changing the connection length between the good and the bad curvature side. Simultaneously this influences the stabilizing effect of the local magnetic shear close to the LCFS as well as the $E \times B$ flow shear. Ideal ballooning stability calculations with the HELENA code reveal that small ELM plasmas are indeed unstable against ballooning modes very close to the LCFS but can exhibit second ballooning stability in the steep gradient region which correlates with enhanced confinement. We also present first non-linear simulations of small ELM regimes with the JOREK code including the $E \times B$ shear which indeed develop ballooning like fluctuations in the high triangularity limit. In the region where the small ELMs originate the dimensionless parameters are very similar in our investigated discharges and in a reactor, making this regime the ideal exhaust scenario for a future reactor. △ Less

Submitted 25 October, 2021; originally announced October 2021.

MHD simulations of small ELMs at low triangularity in ASDEX Upgrade

Authors: A. Cathey, M. Hoelzl, G. Harrer, M. G. Dunne, G. T. A. Huijsmans, K. Lackner, S. J. P. Pamela, E. Wolfrum, S. Günter, the JOREK team, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: The development of small- and no-ELM regimes for ITER is a high priority topic due to the risks associated to type-I ELMs. By considering non-linear extended MHD simulations of the ASDEX Upgrade tokamak with the JOREK code, we probe a regime that avoids type-I ELMs completely provided that the separatrix density is high enough. The dynamics of the pedestal in this regime are observed to be qualita… ▽ More The development of small- and no-ELM regimes for ITER is a high priority topic due to the risks associated to type-I ELMs. By considering non-linear extended MHD simulations of the ASDEX Upgrade tokamak with the JOREK code, we probe a regime that avoids type-I ELMs completely provided that the separatrix density is high enough. The dynamics of the pedestal in this regime are observed to be qualitatively similar to the so-called quasi-continuous exhaust (QCE) regime in several ways. Repetitive type-I ELMs are substituted by roughly constant levels of outwards transport caused by peeling-ballooning modes (with dominant ballooning characteristics) which are localised in the last 5\% of the confined region (in normalised poloidal flux). The simulated low triangularity plasma transitions to a type-I ELMy H-mode if the separatrix density is sufficiently reduced or if the input heating power is sufficiently increased. The stabilising factors that play a role in the suppression of the small ELMs are also investigated by analysing the simulations, and the importance of including diamagnetic effects in the simulations is highlighted. By considering a scan in the pedestal resistivity and by measuring the poloidal velocity of the modes (and comparing to theoretical estimates for ideal and resistive modes), we identify the underlying instabilities as resistive peeling-ballooning modes. Decreasing the resistivity below experimentally-relevant conditions (i.e., going towards ideal MHD), the peeling-ballooning modes that constrain the pedestal below the type-I ELM stability boundary display sharply decreasing growth rates. △ Less

Submitted 15 October, 2021; originally announced October 2021.

I-mode pedestal relaxation events in the Alcator C-Mod and ASDEX Upgrade tokamaks

Authors: D. Silvagni, J. L. Terry, W. McCarthy, A. E. Hubbard, T. Eich, M. Faitsch, L. Gil, T. Golfinopoulos, G. Grenfell, M. Griener, T. Happel, J. W. Hughes, U. Stroth, E. Viezzer, the ASDEX Upgrade team, the EUROfusion MST1 team

Abstract: In some conditions, I-mode plasmas can feature pedestal relaxation events (PREs) that transiently enhance the energy reaching the divertor target plates. To shed light into their appearance, characteristics and energy reaching the divertor targets, a comparative study between two tokamaks $-$ Alcator C-Mod and ASDEX Upgrade $-$ is carried out. It is found that PREs appear only in a subset of I-mod… ▽ More In some conditions, I-mode plasmas can feature pedestal relaxation events (PREs) that transiently enhance the energy reaching the divertor target plates. To shed light into their appearance, characteristics and energy reaching the divertor targets, a comparative study between two tokamaks $-$ Alcator C-Mod and ASDEX Upgrade $-$ is carried out. It is found that PREs appear only in a subset of I-mode discharges, mainly when the plasma is close to the H-mode transition. Also, the nature of the triggering instability is discussed by comparing measurements close to the separatrix in both devices. The PRE relative energy loss from the confined region increases with decreasing pedestal top collisionality $ν_{\mathrm{ped}}^*$. In addition, the relative electron temperature drop at the pedestal top, which is related to the conductive energy loss, rises with decreasing $ν_{\mathrm{ped}}^*$. Finally, the peak parallel energy fluence due to the PRE measured on the divertor in both devices is compared to the model introduced in [1] for type-I ELMs. The model is shown to provide an upper boundary for PRE energy fluence data, while a lower boundary is found by dividing the model by three. These two boundaries are used to make projections to future devices such as DEMO and ARC. △ Less

Submitted 6 September, 2021; originally announced September 2021.

Probing the Physics of the Solar Atmosphere with the Multi-slit Solar Explorer (MUSE): II. Flares and Eruptions

Authors: Mark C. M. Cheung, Juan Martínez-Sykora, Paola Testa, Bart De Pontieu, Georgios Chintzoglou, Matthias Rempel, Vanessa Polito, Graham S. Kerr, Katharine K. Reeves, Lyndsay Fletcher, Meng **, Daniel Nóbrega-Siverio, Sanja Danilovic, Patrick Antolin, Joel Allred, Viggo Hansteen, Ignacio Ugarte-Urra, Edward DeLuca, Dana Longcope, Shinsuke Takasao, Marc DeRosa, Paul Boerner, Sarah Jaeggli, Nariaki Nitta, Adrian Daw , et al. (3 additional authors not shown)

Abstract: Current state-of-the-art spectrographs cannot resolve the fundamental spatial (sub-arcseconds) and temporal scales (less than a few tens of seconds) of the coronal dynamics of solar flares and eruptive phenomena. The highest resolution coronal data to date are based on imaging, which is blind to many of the processes that drive coronal energetics and dynamics. As shown by IRIS for the low solar at… ▽ More Current state-of-the-art spectrographs cannot resolve the fundamental spatial (sub-arcseconds) and temporal scales (less than a few tens of seconds) of the coronal dynamics of solar flares and eruptive phenomena. The highest resolution coronal data to date are based on imaging, which is blind to many of the processes that drive coronal energetics and dynamics. As shown by IRIS for the low solar atmosphere, we need high-resolution spectroscopic measurements with simultaneous imaging to understand the dominant processes. In this paper: (1) we introduce the Multi-slit Solar Explorer (MUSE), a spaceborne observatory to fill this observational gap by providing high-cadence (<20 s), sub-arcsecond resolution spectroscopic rasters over an active region size of the solar transition region and corona; (2) using advanced numerical models, we demonstrate the unique diagnostic capabilities of MUSE for exploring solar coronal dynamics, and for constraining and discriminating models of solar flares and eruptions; (3) we discuss the key contributions MUSE would make in addressing the science objectives of the Next Generation Solar Physics Mission (NGSPM), and how MUSE, the high-throughput EUV Solar Telescope (EUVST) and the Daniel K Inouye Solar Telescope (and other ground-based observatories) can operate as a distributed implementation of the NGSPM. This is a companion paper to De Pontieu et al. (2021; arXiv:2106.15584), which focuses on investigating coronal heating with MUSE. △ Less

Submitted 30 June, 2021; v1 submitted 29 June, 2021; originally announced June 2021.

Comments: 42 pages, 22 figures, submitted to ApJ

Probing the physics of the solar atmosphere with the Multi-slit Solar Explorer (MUSE): I. Coronal Heating

Authors: Bart De Pontieu, Paola Testa, Juan Martinez-Sykora, Patrick Antolin, Konstantinos Karampelas, Viggo Hansteen, Matthias Rempel, Mark C. M. Cheung, Fabio Reale, Sanja Danilovic, Paolo Pagano, Vanessa Polito, Ineke De Moortel, Daniel Nobrega-Siverio, Tom Van Doorsselaere, Antonino Petralia, Mahboubeh Asgari-Targhi, Paul Boerner, Mats Carlsson, Georgios Chintzoglou, Adrian Daw, Ed DeLuca, Leon Golub, Takuma Matsumoto, Ignacio Ugarte-Urra , et al. (2 additional authors not shown)

Abstract: The Multi-slit Solar Explorer (MUSE) is a proposed NASA MIDEX mission, currently in Phase A, composed of a multi-slit EUV spectrograph (in three narrow spectral bands centered around 171A, 284A, and 108A) and an EUV context imager (in two narrow passbands around 195A and 304A). MUSE will provide unprecedented spectral and imaging diagnostics of the solar corona at high spatial (<0.5 arcsec), and t… ▽ More The Multi-slit Solar Explorer (MUSE) is a proposed NASA MIDEX mission, currently in Phase A, composed of a multi-slit EUV spectrograph (in three narrow spectral bands centered around 171A, 284A, and 108A) and an EUV context imager (in two narrow passbands around 195A and 304A). MUSE will provide unprecedented spectral and imaging diagnostics of the solar corona at high spatial (<0.5 arcsec), and temporal resolution (down to ~0.5s) thanks to its innovative multi-slit design. By obtaining spectra in 4 bright EUV lines (Fe IX 171A , Fe XV 284A, Fe XIX-Fe XXI 108A) covering a wide range of transition region and coronal temperatures along 37 slits simultaneously, MUSE will for the first time be able to "freeze" (at a cadence as short as 10 seconds) with a spectroscopic raster the evolution of the dynamic coronal plasma over a wide range of scales: from the spatial scales on which energy is released (~0.5 arcsec) to the large-scale often active-region size (170 arcsec x 170 arcsec) atmospheric response. We use advanced numerical modeling to showcase how MUSE will constrain the properties of the solar atmosphere on the spatio-temporal scales (~0.5 arcsec, ~20 seconds) and large field-of-view on which various state-of-the-art models of the physical processes that drive coronal heating, solar flares and coronal mass ejections (CMEs) make distinguishing and testable predictions. We describe how the synergy between MUSE, the single-slit, high-resolution Solar-C EUVST spectrograph, and ground-based observatories (DKIST and others) can address how the solar atmosphere is energized, and the critical role MUSE plays because of the multi-scale nature of the physical processes involved. In this first paper, we focus on how comparisons between MUSE observations and theoretical models will significantly further our understanding of coronal heating mechanisms. △ Less

Submitted 29 June, 2021; originally announced June 2021.

Comments: 46 pages, 22 figures, submitted to ApJ

Latest results on quiescent and post-disruption runaway electron mitigation experiments at Frascati Tokamak Upgrade

Authors: D. Carnevale, P. Buratti, M. Baruzzo, W. Bin, F. Bombarda, L. Boncagni, C. Paz-Soldan, L. Calacci, M. Cappelli, C. Castaldo, S. Ceccuzzi, C. Centioli, C. Cianfarani, S. Coda, F. Cordella, O. D Arcangelo, J. Decker, B. Duval, B. Esposito, L. Gabellieri, S. Galeani, S. Garavaglia, C. Galperti, G. Ghillardi, G. Granucci , et al. (16 additional authors not shown)

Abstract: Results from the last FTU campaigns on the deuterium large (wrt FTU volume) pellet REs suppression capability, mainly due to the induced burst MHD activity expelling REs seed are presented for discharges with 0.5 MA and 5.3T. Clear indications of avalanche multiplication of REs following single pellet injection on 0.36 MA flat-top discharges is shown together with quantitative indications of dissi… ▽ More Results from the last FTU campaigns on the deuterium large (wrt FTU volume) pellet REs suppression capability, mainly due to the induced burst MHD activity expelling REs seed are presented for discharges with 0.5 MA and 5.3T. Clear indications of avalanche multiplication of REs following single pellet injection on 0.36 MA flat-top discharges is shown together with quantitative indications of dissipative effects in terms of critical electrical field increase due to fan-like instabilities. Analysis of large fan-like instabilities on post-disruption RE beams, that seem to be correlated with low electrical field and background density drops, reveal their strong RE energy suppression capability suggesting a new strategy for RE energy suppression controlling large fan instabilities. We demonstrate how such density drops can be induced using modulated ECRH power on post-disruption beams. △ Less

Submitted 25 May, 2021; v1 submitted 10 May, 2021; originally announced May 2021.

Comments: DRAFT that will be submitted to NF (the conference version is on FEC/IAEA conference 2020)

Electrostatic solitary waves in the Earth's bow shock: nature, properties, lifetimes and origin

Authors: R. Wang, I. Y. Vasko, F. S. Mozer, S. D. Bale, I. V. Kuzichev, A. V. Artemyev, MMS Team

Abstract: We present a statistical analysis of more than two thousand bipolar electrostatic solitary waves (ESW) collected from ten quasi-perpendicular Earth's bow shock crossings by Magnetospheric Multiscale spacecraft. We developed and implemented a correction procedure for reconstruction of actual electric fields, velocities, and other properties of ESW from measurements, whose spatial scales are typical… ▽ More We present a statistical analysis of more than two thousand bipolar electrostatic solitary waves (ESW) collected from ten quasi-perpendicular Earth's bow shock crossings by Magnetospheric Multiscale spacecraft. We developed and implemented a correction procedure for reconstruction of actual electric fields, velocities, and other properties of ESW from measurements, whose spatial scales are typically comparable with or smaller than spatial distance between voltage-sensitive probes. We determined the optimal ratio between frequency response factors of axial and spin plane antennas to be around 1.65/1.8. We found that more than 95\% of the ESW in the Earth's bow shock are of negative polarity and present an in depth analysis of properties of these ESW. They have spatial scales of about 10--100 m that is within a range of $λ_{D}$ to $10λ_{D}$, amplitudes typically below a few Volts that is below 0.1 of local electron temperature, and velocities below a few hundreds km/s in spacecraft and plasma rest frames that is on the order of local ion-acoustic speed. The spatial scales of ESW are distinctly correlated with local Debye length $λ_{D}$. ESW with amplitudes of 5--30 V or 0.1--0.3 Te have the occurrence rate of a few percent. The ESW have electric fields generally oblique to local magnetic field and propagate highly oblique to shock normal ${\bf N}$; more than 80\% of ESW propagate within 30$^{\circ}$ of the shock plane. In the shock plane, ESW typically propagate within a few tens of degrees of local magnetic field projection ${\bf B}_{\rm LM}$ onto the shock plane and preferentially opposite to ${\bf N}\times {\bf B}_{\rm LM}$. We argue that the ESW of negative polarity are ion phase space holes produced in a nonlinear stage of ion-ion ion-streaming instabilities. We estimated lifetimes of the ion holes to be 10--100 ms, or 1--10 km in terms of spatial distance. △ Less

Submitted 9 March, 2021; originally announced March 2021.

Comparing spontaneous and pellet-triggered ELMs via non-linear extended MHD simulations

Authors: A. Cathey, M. Hoelzl, S. Futatani, P. T. Lang, K. Lackner, G. T. A. Huijsmans, S. J. P. Pamela, S. Günter, the JOREK team, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: Injecting frozen deuterium pellets into an ELMy H-mode plasma is a well established scheme for triggering edge localized modes (ELMs) before they naturally occur. Based on an ASDEX Upgrade H-mode plasma, this article presents a comparison of extended MHD simulations of spontaneous type-I ELMs and pellet-triggered ELMs allowing to study their non-linear dynamics in detail. In particular, pellet-tri… ▽ More Injecting frozen deuterium pellets into an ELMy H-mode plasma is a well established scheme for triggering edge localized modes (ELMs) before they naturally occur. Based on an ASDEX Upgrade H-mode plasma, this article presents a comparison of extended MHD simulations of spontaneous type-I ELMs and pellet-triggered ELMs allowing to study their non-linear dynamics in detail. In particular, pellet-triggered ELMs are simulated by injecting deuterium pellets into different time points during the pedestal build-up described in [A. Cathey et al. Nuclear Fusion 60, 124007 (2020)]. Realistic ExB and diamagnetic background plasma flows as well as the time dependent bootstrap current evolution are included during the build-up to capture the balance between stabilising and destabilising terms for the edge instabilities accurately. Dependencies on the pellet size and injection times are studied. The spatio-temporal structures of the modes and the resulting divertor heat fluxes are compared in detail between spontaneous and triggered ELMs. We observe that the premature excitation of ELMs by means of pellet injection is caused by a helical perturbation described by a toroidal mode number of n = 1. In accordance with experimental observations, the pellet-triggered ELMs show reduced thermal energy losses and narrower divertor wetted area with respect to spontaneous ELMs. The peak divertor energy fluency is seen to decrease when ELMs are triggered by pellets injected earlier during the pedestal build-up. △ Less

Submitted 11 February, 2021; originally announced February 2021.

Electron runaway in ASDEX Upgrade experiments of varying core temperature

Authors: O. Linder, G. Papp, E. Fable, F. Jenko, G. Pautasso, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: The formation of a substantial post-disruption runaway electron current in ASDEX Upgrade material injection experiments is determined by avalanche multiplication of a small seed population of runaway electrons. For the investigation of these scenarios, the runaway electron description of the coupled 1.5D transport solvers ASTRA-STRAHL is amended by a fluid-model describing electron runaway caused… ▽ More The formation of a substantial post-disruption runaway electron current in ASDEX Upgrade material injection experiments is determined by avalanche multiplication of a small seed population of runaway electrons. For the investigation of these scenarios, the runaway electron description of the coupled 1.5D transport solvers ASTRA-STRAHL is amended by a fluid-model describing electron runaway caused by the hot-tail mechanism. Applied in simulations of combined background plasma evolution, material injection, and runaway electron generation in ASDEX Upgrade discharge #33108, both the Dreicer and hot-tail mechanism for electron runaway produce only $\sim$ 3$~$kA of runaway current. In colder plasmas with core electron temperatures $T_\mathrm{e,c}$ below 9$~$keV, the post-disruption runaway current is predicted to be insensitive to the initial temperature, in agreement with experimental observations. Yet in hotter plasmas with $T_\mathrm{e,c} > 10~\mathrm{keV}$, hot-tail runaway can be increased by up to an order of magnitude, contributing considerably to the total post-disruption runaway current. In ASDEX Upgrade high temperature runaway experiments, however, no runaway current is observed at the end of the disruption, despite favourable conditions for both primary and secondary runaway. △ Less

Submitted 7 May, 2021; v1 submitted 12 January, 2021; originally announced January 2021.

Comments: 26 pages, 11 figures; published in the Journal of Plasma Physics

Journal ref: Journal of Plasma Physics 87(3), 905870301 (2021)

SDSS-IV MANGA: A Star Formation -- Baryonic Mass Relation at Kpc Scales

Authors: J. K. Barrera-Ballesteros, T. Heckman, S. F. Sanchez, N. Drory, I. Cruz-Gonzalez, L. Carigi, R. A. Riffel, M. Boquien, P. Tissera, D. Bizyaev, Y. Rong, N. F. Boardman, P. Alvarez Hurtado, the MaNGA team

Abstract: Star formation rate density, $Σ_{\rm SFR}$, has shown a remarkable correlation with both components of the baryonic mass at kpc scales (i.e., the stellar mass density, and the molecular gas mass density; $Σ_{\ast}$, and $Σ_{\rm mol}$, respectively) for galaxies in the nearby Universe. In this study we propose an empirical relation between $Σ_{\rm SFR}$ and the baryonic mass surface density (… ▽ More Star formation rate density, $Σ_{\rm SFR}$, has shown a remarkable correlation with both components of the baryonic mass at kpc scales (i.e., the stellar mass density, and the molecular gas mass density; $Σ_{\ast}$, and $Σ_{\rm mol}$, respectively) for galaxies in the nearby Universe. In this study we propose an empirical relation between $Σ_{\rm SFR}$ and the baryonic mass surface density ($Σ_{\rm b}$ =$Σ_{\rm mol,Av}$ + $Σ_{\ast}$; where $Σ_{\rm mol,Av}$ is the molecular gas density derived from the optical extinction, Av) at kpc scales using the spatially-resolved properties of the MaNGA survey - the largest sample of galaxies observed via Integral Field Spectroscopy (IFS, $\sim$ 8400 objects). We find that $Σ_{\rm SFR}$ tightly correlates with $Σ_{\rm b}$. Furthermore, we derive an empirical relation between the $Σ_{\rm SFR}$ and a second degree polynomial of $Σ_{\rm b}$ yielding a one-to-one relation between these two observables. Both, $Σ_{\rm b}$ and its polynomial form show a stronger correlation and smaller scatter with respect to $Σ_{\rm SFR}$ than the relations derived using the individual components of $Σ_{\rm b}$. Our results suggest that indeed these three parameters are physically correlated, suggesting a scenario in which the two components of the baryonic mass regulate the star-formation activity at kpc scales. △ Less

Submitted 7 January, 2021; originally announced January 2021.

Comments: 10 pages, 6 Figures, accepted for publication in ApJ

Modelling of runaway electron dynamics during argon-induced disruptions in ASDEX Upgrade and JET

Authors: K. Insulander Björk, O. Vallhagen, G. Papp, C. Reux, O. Embreus, E. Rachlew, T. Fülöp, the ASDEX Upgrade Team, JET contributors, the EUROfusion MST1 Team

Abstract: Disruptions in tokamak plasmas may lead to the generation of runaway electrons that have the potential to damage plasma-facing components. Improved understanding of the runaway generation process requires interpretative modelling of experiments. In this work we simulate eight discharges in the ASDEX Upgrade and JET tokamaks, where argon gas was injected to trigger the disruption. We use a fluid mo… ▽ More Disruptions in tokamak plasmas may lead to the generation of runaway electrons that have the potential to damage plasma-facing components. Improved understanding of the runaway generation process requires interpretative modelling of experiments. In this work we simulate eight discharges in the ASDEX Upgrade and JET tokamaks, where argon gas was injected to trigger the disruption. We use a fluid modelling framework with the capability to model the generation of runaway electrons through the hot-tail, Dreicer and avalanche mechanisms, as well as runaway electron losses. Using experimentally based initial values of plasma current and electron temperature and density, we can reproduce the plasma current evolution using realistic assumptions about temperature evolution and assimilation of the injected argon in the plasma. The assumptions and results are similar for the modelled discharges in ASDEX Upgrade and JET, indicating that the implemented models are applicable to machines of varying size, which is important for the modelling of future, larger machines. For the modelled discharges in ASDEX Upgrade, where the initial temperature was comparatively high, we had to assume that a large fraction of the hot-tail runaway electrons were lost in order to reproduce the measured current evolution. △ Less

Submitted 30 June, 2021; v1 submitted 6 January, 2021; originally announced January 2021.

Comments: 17 pages, 7 figures

Tomographic reconstruction of the runaway distribution function in TCV using multispectral synchrotron images

Authors: T. A. Wijkamp, A. Perek, J. Decker, B. Duval, M. Hoppe, G. Papp, U. A. Sheikh, I. G. J. Classen, R. J. E. Jaspers, the TCV team, the EUROfusion MST1 team

Abstract: Synchrotron radiation observed in a quiescent TCV runaway discharge is studied using filtered camera images targeting three distinct wavelength intervals. Through the tomographic SART procedure the high momentum, high pitch angle part of the spatial and momentum distribution of these relativistic particles is reconstructed. Experimental estimates of the distribution are important for verification… ▽ More Synchrotron radiation observed in a quiescent TCV runaway discharge is studied using filtered camera images targeting three distinct wavelength intervals. Through the tomographic SART procedure the high momentum, high pitch angle part of the spatial and momentum distribution of these relativistic particles is reconstructed. Experimental estimates of the distribution are important for verification and refinement of formation-, decay- and transport-models underlying runaway avoidance and mitigation strategy design. Using a test distribution it is demonstrated that the inversion procedure provides estimates accurate to within a few tens of percent in the region of phase-space contributing most to the synchrotron image. We find that combining images filtered around different parts of the emission spectrum widens the probed part of momentum-space and reduces reconstruction errors. Next, the SART algorithm is used to obtain information on the spatiotemporal runaway momentum distribution in a selected TCV discharge. The momentum distribution is found to relax towards an avalanche-like exponentially decaying profile. Anomalously high pitch angles and a radial profile increasing towards the edge are found for the most strongly emitting particles in the distribution. Pitch angle scattering by toroidal magnetic field ripple is consistent with this picture. An alternative explanation is the presence of high frequency instabilities in combination with the formation of a runaway shell at the edge of the plasma. △ Less

Submitted 5 February, 2021; v1 submitted 30 October, 2020; originally announced November 2020.

Comments: 18 pages, 13 figures, submitted to Nuclear Fusion

Integrated real-time supervisory management for off-normal-event handling and feedback control of tokamak plasmas

Authors: T. Vu, F. Felici, C. Galperti, M. Maraschek, A. Pau, N. Rispoli, O. Sauter, B. Sieglin, the TCV team, the MST1 team

Abstract: For long-pulse tokamaks, one of the main challenges in control strategy is to simultaneously reach multiple control objectives and to robustly handle in real-time (RT) unexpected events (off-normal-events -- ONEs) with a limited set of actuators. We have developed in our previous work a generic architecture of the plasma control system (PCS) including a supervisor and an actuator manager to deal w… ▽ More For long-pulse tokamaks, one of the main challenges in control strategy is to simultaneously reach multiple control objectives and to robustly handle in real-time (RT) unexpected events (off-normal-events -- ONEs) with a limited set of actuators. We have developed in our previous work a generic architecture of the plasma control system (PCS) including a supervisor and an actuator manager to deal with these issues. We present in this paper recent developments of real-time decision-making by the supervisor to switch between different control scenarios (normal, backup, shutdown, disruption mitigation, etc.) during the discharge, based on off-normal-event states. We first standardize the evaluation of ONEs and thereby simplify significantly the supervisor decision logic, as well as facilitate the modifications and extensions of ONE states in the future. The whole PCS has been implemented on the TCV tokamak, applied to disruption avoidance with density limit experiments, demonstrating the excellent capabilities of the new RT integrated strategy. △ Less

Submitted 30 October, 2020; originally announced October 2020.

Comments: 6 pages, 6 figures, 3 tables

Transition from no-ELM response to pellet ELM triggering during pedestal build-up -- insights from extended MHD simulations

Authors: S Futatani, A Cathey, M Hoelzl, P T Lang, G T A Huijsmans, M. Dunne, JOREK Team, ASDEX Upgrade Team, EUROfusion MST1 Team

Abstract: Pellet ELM triggering is a well established scheme for decreasing the time between two successive ELM crashes below its natural value. Reliable ELM pacing has been demonstrated experimentally in several devices increasing the ELM frequency considerably. However, it was also shown that the frequency cannot be increased arbitrarily due to a so-called lag-time. During this time after a preceding natu… ▽ More Pellet ELM triggering is a well established scheme for decreasing the time between two successive ELM crashes below its natural value. Reliable ELM pacing has been demonstrated experimentally in several devices increasing the ELM frequency considerably. However, it was also shown that the frequency cannot be increased arbitrarily due to a so-called lag-time. During this time after a preceding natural or triggered ELM crash, neither a natural ELM crash occurs nor the triggering of an ELM crash by pellet injection is possible. For this article, pellet ELM triggering simulations are advanced beyond previous studies in two ways. Firstly, realistic ExB and diamagnetic background flows are included. And secondly, the pellet is injected at different stages of the pedestal build-up. This allows to recover the lag-time for the first time in simulations and investigate it in detail. A series of non-linear extended MHD simulations is performed to investigate the plasma dynamics resulting from an injection at different time points during the pedestal build-up. The experimentally observed lag-time is qualitatively reproduced well. In particular, a sharp transition is observed between the regime where no ELMs can be triggered and the regime where pellet injection causes an ELM crash. Via variations of pellet parameters and injection time, the two regimes are studied and compared in detail revealing pronounced differences in the non-linear dynamics. The toroidal mode spectrum is significantly broader when an ELM crash is triggered enhancing the stochasticity and therefore also the losses of thermal energy along magnetic field lines. In the heat fluxes to the divertor targets, pronounced toroidal asymmetries are observed. In case of high injection velocities leading to deep penetration, also the excitation of core modes like the $2/1$ neoclassical tearing mode is observed. △ Less

Submitted 24 December, 2020; v1 submitted 16 September, 2020; originally announced September 2020.

Comments: 45 pages

Readout for Kinetic-Inductance-Detector-Based Submillimeter Radio Astronomy

Authors: Ran Duan, MUSIC Team, Xinxin Zhang, Chenhui Niu, Di Li

Abstract: A substantial amount of important scientific information is contained within astronomical data at the submillimeter and far-infrared (FIR) wavelengths, including information regarding dusty galaxies, galaxy clusters, and star-forming regions; however, these wavelengths are among the least-explored fields in astronomy because of the technological difficulties involved in such research. Over the pas… ▽ More A substantial amount of important scientific information is contained within astronomical data at the submillimeter and far-infrared (FIR) wavelengths, including information regarding dusty galaxies, galaxy clusters, and star-forming regions; however, these wavelengths are among the least-explored fields in astronomy because of the technological difficulties involved in such research. Over the past 20 years, considerable efforts have been devoted to develo** submillimeter- and millimeter-wavelength astronomical instruments and telescopes. The number of detectors is an important property of such instruments and is the subject of the current study. Future telescopes will require as many as hundreds of thousands of detectors to meet the necessary requirements in terms of the field of view, scan speed, and resolution. A large pixel count is one benefit of the development of multiplexable detectors that use kinetic inductance detector (KID) technology. This paper presents the development of all aspects of the readout electronics for a KID-based instrument, which enabled one of the largest detector counts achieved to date in submillimeter-/millimeter-wavelength imaging arrays: a total of 2304 detectors. The work presented in this paper had been implemented in the MUltiwavelength Submillimeter Inductance Camera (MUSIC), a instrument for the Caltech Submillimeter Observatory (CSO) between 2013 and 2015. △ Less

Submitted 27 August, 2020; v1 submitted 25 August, 2020; originally announced August 2020.

A novel hydrogenic spectroscopic technique for inferring the role of plasma-molecule interaction on power and particle balance during detached conditions

Authors: K Verhaegh, B Lipschultz, C Bowman, B P Duval, U Fantz, A Fil, J R Harrison, D Moulton, O Myatra, D Wünderlich, F Federici, D S Gahle, A Perek, M Wensing, the TCV team, the EuroFusion MST1 team

Abstract: Detachment, an important mechanism for reducing target heat deposition, is achieved through reductions in power, particle and momentum; which are induced through plasma-atom and plasma-molecule interactions. Experimental research in how those reactions precisely contribute to detachment is limited. In this work, we investigate a new spectroscopic technique to utilise Hydrogen Balmer line measureme… ▽ More Detachment, an important mechanism for reducing target heat deposition, is achieved through reductions in power, particle and momentum; which are induced through plasma-atom and plasma-molecule interactions. Experimental research in how those reactions precisely contribute to detachment is limited. In this work, we investigate a new spectroscopic technique to utilise Hydrogen Balmer line measurements to 1) disentangle the Balmer line emission from the various plasma-atom and plasma-molecule interactions; and 2) quantify their contributions to ionisation, recombination and radiative power losses. During detachment, the observed $Hα$ emission often strongly increases, which could be an indicator for plasma-molecule interactions involving $H_2^+$ and/or $H^-$. Our analysis technique quantifies the $Hα$ emission due to plasma-molecule interactions and uses this to 1) quantify the Balmer line emission contribution due to $H_2^+$ and/or $H^-$; 2) subsequently estimate its resulting particle sinks/sources and radiative power losses. Its performance is verified using synthetic diagnostic techniques of both detached TCV and MAST-U SOLPS-ITER simulations. Experimental results of this technique on TCV data show a bifurcation occurs between the measured total $Hα$ and the atomic estimate of $Hα$ emission, indicative of the presence of additional $Hα$ due to plasma-molecule interactions with $H_2^+$ (and/or $H^-$). An example analysis shows that the hydrogenic line series, even $Lyα$ as well as the medium-n Balmer lines can be significantly influenced by plasma-molecule interactions by tens of percent during which significant Molecular Activated Recombination (MAR) is expected. △ Less

Submitted 17 February, 2021; v1 submitted 1 August, 2020; originally announced August 2020.

Journal ref: Plasma Phys. Control. Fusion 63 035018 (2021)

Non-linear extended MHD simulations of type-I edge localised mode cycles in ASDEX Upgrade and their underlying triggering mechanism

Authors: Andres Cathey, M. Hoelzl, K. Lackner, G. T. A. Huijsmans, M. G. Dunne, E. Wolfrum, S. J. P. Pamela, F. Orain, S. Günter, the JOREK team, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: A triggering mechanism responsible for the explosive onset of edge localised modes (ELMs) in fusion plasmas is identified by performing, for the first time, non-linear magnetohydrodynamic simulations of repetitive type-I ELMs. Briefly prior to the ELM crash, destabilising and stabilising terms are affected at different timescales by an increasingly ergodic magnetic field caused by non-linear inter… ▽ More A triggering mechanism responsible for the explosive onset of edge localised modes (ELMs) in fusion plasmas is identified by performing, for the first time, non-linear magnetohydrodynamic simulations of repetitive type-I ELMs. Briefly prior to the ELM crash, destabilising and stabilising terms are affected at different timescales by an increasingly ergodic magnetic field caused by non-linear interactions between the axisymmetric background plasma and growing non-axisymmetric perturbations. The separation of timescales prompts the explosive, i.e. faster than exponential, growth of an ELM crash which lasts ${\sim}$ 500 $μ$s. The duration and size of the simulated ELM crashes compare qualitatively well with type-I ELMs in ASDEX Upgrade. As expected for type-I ELMs, a direct proportionality between the heating power in the simulations and the ELM repetition frequency is obtained. The simulations presented here are a major step forward towards predictive modelling of ELMs and of the assessment of mitigation techniques in ITER and other future tokamaks. △ Less

Submitted 26 October, 2020; v1 submitted 20 July, 2020; originally announced July 2020.

I-mode pedestal relaxation events at ASDEX Upgrade

Authors: D. Silvagni, T. Eich, T. Happel, G. F. Harrer, M. Griener, M. Dunne, M. Cavedon, M. Faitsch, L. Gil, D. Nille, B. Tal, R. Fischer, U. Stroth, D. Brida, P. David, P. Manz, E. Viezzer, the ASDEX Upgrade team, the EUROfusion MST1 team

Abstract: The I-mode confinement regime can feature small edge temperature drops that can lead to an increase in the energy deposited onto the divertor targets. In this work, we show that these events are associated with a relaxation of both electron temperature and density edge profiles, with the largest drop found at the pedestal top position. Stability analysis of edge profiles reveals that the operation… ▽ More The I-mode confinement regime can feature small edge temperature drops that can lead to an increase in the energy deposited onto the divertor targets. In this work, we show that these events are associated with a relaxation of both electron temperature and density edge profiles, with the largest drop found at the pedestal top position. Stability analysis of edge profiles reveals that the operational points are far from the ideal peeling-ballooning boundary. Also, we show that these events appear close to the H-mode transition in the typical I-mode operational space in ASDEX Upgrade, and that no further enhancement of energy confinement is found when they occur. Moreover, scrape-off layer transport during these events is found to be very similar to type-I ELMs, with regard to timescales ($\approx$ 800 $μ$s), filament propagation, toroidally asymmetric energy effluxes at the midplane and asymmetry between inner and outer divertor deposited energy. In particular, the latter reveals that more energy reaches the outer divertor target. Lastly, first measurements of the divertor peak energy fluence are reported, and projections to ARC - a reactor designed to operate in I-mode - are drawn. △ Less

Submitted 19 June, 2020; originally announced June 2020.

Spatiotemporal analysis of the runaway distribution function from synchrotron images in an ASDEX Upgrade disruption

Authors: M. Hoppe, L. Hesslow, O. Embreus, L. Unnerfelt, G. Papp, I. Pusztai, T. Fülöp, O. Lexell, T. Lunt, E. Macusova, P. J. McCarthy, G. Pautasso, G. I. Pokol, G. Por, P. Svensson, the ASDEX Upgrade team, the EUROfusion MST1 team

Abstract: Synchrotron radiation images from runaway electrons (REs) in an ASDEX Upgrade discharge disrupted by argon injection are analyzed using the synchrotron diagnostic tool SOFT and coupled fluid-kinetic simulations. We show that the evolution of the runaway distribution is well described by an initial hot-tail seed population, which is accelerated to energies between 25-50 MeV during the current quenc… ▽ More Synchrotron radiation images from runaway electrons (REs) in an ASDEX Upgrade discharge disrupted by argon injection are analyzed using the synchrotron diagnostic tool SOFT and coupled fluid-kinetic simulations. We show that the evolution of the runaway distribution is well described by an initial hot-tail seed population, which is accelerated to energies between 25-50 MeV during the current quench, together with an avalanche runaway tail which has an exponentially decreasing energy spectrum. We find that, although the avalanche component carries the vast majority of the current, it is the high-energy seed remnant that dominates synchrotron emission. With insights from the fluid-kinetic simulations, an analytic model for the evolution of the runaway seed component is developed and used to reconstruct the radial density profile of the RE beam. The analysis shows that the observed change of the synchrotron pattern from circular to crescent shape is caused by a rapid redistribution of the radial profile of the runaway density. △ Less

Submitted 5 February, 2021; v1 submitted 29 May, 2020; originally announced May 2020.

Comments: 25 pages, 12 figures

Journal ref: Journal of Plasma Physics, Volume 87, Issue 1, February 2021, 855870102

Recent progress towards a quantitative description of filamentary SOL transport

Authors: D. Carralero, M. Siccinio, M. Komm, S. A. Artene, F. A. D'Isa, J. Adamek, L. Aho-Mantila, G. Birkenmeier, M. Brix, G. Fuchert, M. Groth, T. Lunt, P. Manz, J. Madsen, S. Marsen, H. W. Müller, U. Stroth, H. J. Sun, N. Vianello, M. Wischmeier, E. Wolfrum, ASDEX Upgrade Team, COMPASS Team, JET Contributors, the EUROfusion MST team

Abstract: A summary of recent results on filamentary transport, mostly obtained in the ASDEX-Upgrade tokamak (AUG), is presented and discussed in an attempt to produce a coherent picture of SOL filamentary transport: A clear correlation is found between L-mode density shoulder formation in the outer midplane and a transition between the sheath limited and the inertial filamentary regimes. Divertor collision… ▽ More A summary of recent results on filamentary transport, mostly obtained in the ASDEX-Upgrade tokamak (AUG), is presented and discussed in an attempt to produce a coherent picture of SOL filamentary transport: A clear correlation is found between L-mode density shoulder formation in the outer midplane and a transition between the sheath limited and the inertial filamentary regimes. Divertor collisionality is found to be the parameter triggering the transition. A clear reduction of the ion temperature takes place in the far SOL after the transition, both for the background and the filaments. This coincides with a strong variation of the ion temperature distribution, which deviates from Gaussianity and becomes dominated by a strong peak below $5$ eV. The filament transition mechanism triggered by a critical value of collisionality seems to be generally applicable to inter-ELM H-mode plasmas, although a secondary threshold related to deuterium fueling is observed. EMC3-EIRENE simulations of neutral dynamics show that an ionization front near the main chamber wall is formed after the shoulder formation. Finally, a clear increase of SOL opacity to neutrals is observed associated to the shoulder formation. A common SOL transport framework is proposed account for all these results, and their potential implications for future generation devices are discussed. △ Less

Submitted 13 May, 2020; originally announced May 2020.

Comments: Published in Nuclear Fusion

On the role of filaments in perpendicular heat transport at the Scrape-off Layer

Authors: D. Carralero, S. Artene, M. Bernert, G. Birkenmeier, M. Faitsch, P. Manz, P. deMarne, U. Stroth, M. Wischmeier, E. Wolfrum, the ASDEX Upgrade team, the EURO-fusion MST1 Team

Abstract: In this work we carry out quantitative measurements of particle and heat transport associated to SOL filaments in a tokamak, and relate density shoulder formation to the advection of energy in the far SOL. For the first time, this attempt includes direct measurements of ion and electron temperatures for background and filaments. With this aim, we combine data from a number of equivalent L-mode dis… ▽ More In this work we carry out quantitative measurements of particle and heat transport associated to SOL filaments in a tokamak, and relate density shoulder formation to the advection of energy in the far SOL. For the first time, this attempt includes direct measurements of ion and electron temperatures for background and filaments. With this aim, we combine data from a number of equivalent L-mode discharges from the ASDEX Upgrade tokamak in which different probe heads were installed on the midplane manipulator. This approach is validated by a comparison with independent diagnostics. Results indicate an increase of heat transport associated to filaments after the shoulder formation. Several centimeters into the SOL, filaments are still found to carry a substantial fraction (up to one fifth) of the power ejected at the separatrix. △ Less

Submitted 13 May, 2020; originally announced May 2020.

Comments: Published in Nucler Fusion

Kinetic modelling of runaway electron generation in argon-induced disruptions in ASDEX Upgrade

Authors: K. Insulander Björk, G. Papp, O. Embreus, L. Hesslow, T. Fülöp, O. Vallhagen, A. Lier, G. Pautasso, A. Bock, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: Massive material injection has been proposed as a way to mitigate the formation of a beam of relativistic runaway electrons that may result from a disruption in tokamak plasmas. In this paper we analyse runaway generation observed in eleven ASDEX Upgrade discharges where disruption was triggered using massive gas injection. We present numerical simulations in scenarios characteristic of on-axis pl… ▽ More Massive material injection has been proposed as a way to mitigate the formation of a beam of relativistic runaway electrons that may result from a disruption in tokamak plasmas. In this paper we analyse runaway generation observed in eleven ASDEX Upgrade discharges where disruption was triggered using massive gas injection. We present numerical simulations in scenarios characteristic of on-axis plasma conditions, constrained by experimental observations, using a description of the runaway dynamics with self-consistent electric field and temperature evolution in two-dimensional momentum space and zero-dimensional real space. We describe the evolution of the electron distribution function during the disruption, and show that the runaway seed generation is dominated by hot-tail in all of the simulated discharges. We reproduce the observed dependence of the current dissipation rate on the amount of injected argon during the runaway plateau phase. Our simulations also indicate that above a threshold amount of injected argon, the current density after the current quench depends strongly on the argon densities. This trend is not observed in the experiments, which suggests that effects not captured by 0D kinetic modeling -- such as runaway seed transport -- are also important. △ Less

Submitted 27 August, 2020; v1 submitted 20 April, 2020; originally announced May 2020.

Comments: 17 pages, 15 figures, published in Journal of Plasma Physics (Invited Contributions from the 18th European Fusion Theory Conference)

Journal ref: Journal of Plasma Physics (2020) 86(4), 855860401

Self-consistent modeling of runaway electron generation in massive gas injection scenarios in ASDEX Upgrade

Authors: O. Linder, E. Fable, F. Jenko, G. Papp, G. Pautasso, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: We present the first successful simulation of a induced disruption in ASDEX Upgrade from massive material injection (MMI) up to established runaway electron (RE) beam, thus covering pre-thermal quench, thermal quench and current quench (CQ) of the discharge. For future high-current fusion devices such as ITER, the successful suppression of REs through MMI is of critical importance to ensure the st… ▽ More We present the first successful simulation of a induced disruption in ASDEX Upgrade from massive material injection (MMI) up to established runaway electron (RE) beam, thus covering pre-thermal quench, thermal quench and current quench (CQ) of the discharge. For future high-current fusion devices such as ITER, the successful suppression of REs through MMI is of critical importance to ensure the structural integrity of the vessel. To computationally study the interplay between MMI, background plasma response, and RE generation, a toolkit based on the 1.5D transport code coupling ASTRA-STRAHL is developed. Electron runaway is described by state-of-the-art reduced kinetic models in the presence of partially ionized impurities. Applied to argon MMI in ASDEX Upgrade discharge #33108, key plasma parameters measured experimentally, such as temporal evolution of the line averaged electron density, plasma current decay rate and post-CQ RE current, are well reproduced by the simulation presented. Impurity ions are transported into the central plasma by the combined effect of neoclassical processes and additional effects prescribed inside the $q = 2$ rational surface to explain experimental time scales. Thus, a thermal collapse is induced through strong impurity radiation, giving rise to a substantial RE population as observed experimentally. △ Less

Submitted 2 March, 2020; originally announced March 2020.

Comments: 15 pages, 11 figures; submitted to Nuclear Fusion

Flux-driven integrated modelling of main ion pressure and trace tungsten transport in ASDEX Upgrade

Authors: O. Linder, J. Citrin, G. M. D. Hogeweij, C. Angioni, C. Bourdelle, F. J. Casson, E. Fable, A. Ho, F. Koechl, M. Sertoli, the EUROfusion MST1 Team, the ASDEX Upgrade Team

Abstract: Neoclassical and turbulent heavy impurity transport in tokamak core plasmas are determined by main ion temperature, density and toroidal rotation profiles. Thus, in order to understand and prevent experimental behaviour of W accumulation, flux-driven integrated modelling of main ion heat and particle transport over multiple confinement times is a vital prerequisite. For the first time, the quasili… ▽ More Neoclassical and turbulent heavy impurity transport in tokamak core plasmas are determined by main ion temperature, density and toroidal rotation profiles. Thus, in order to understand and prevent experimental behaviour of W accumulation, flux-driven integrated modelling of main ion heat and particle transport over multiple confinement times is a vital prerequisite. For the first time, the quasilinear gyrokinetic code QuaLiKiz has been applied for successful predictions of core kinetic profiles in an ASDEX Upgrade H-mode discharge in the turbulence dominated region within the integrated modelling suite JETTO. Neoclassical contributions are calculated by NCLASS; auxiliary heat and particle deposition profiles due to NBI and ECRH prescribed from previous analysis with TRANSP. Turbulent and neoclassical contributions are insufficient in explaining main ion heat and particle transport inside the $q=1$ surface, necessitating the prescription of further transport coefficients to mimic the impact of MHD activity on central transport. The ion to electron temperature ratio at the simulation boundary at $ρ_\mathrm{tor} = 0.85$ stabilizes ion scale modes while destabilizing ETG modes when significantly exceeding unity. Careful analysis of experimental measurements using Gaussian process regression techniques is carried out to explore reasonable uncertainties. In following trace W impurity transport simulations performed with additionally NEO, neoclassical transport under consideration of poloidal asymmetries alone is found to be insufficient to establish hollow central W density profiles. Reproduction of these conditions measured experimentally is found possible only when assuming the direct impact of a saturated $(m,n)=(1,1)$ MHD mode on heavy impurity transport. △ Less

Submitted 3 February, 2020; originally announced February 2020.

Comments: 26 pages, 17 figures

Journal ref: Nucl. Fusion 59 (2019) 016003

Meteospace, a New Instrument for Solar Survey at the Calern Observatory

Authors: J. -M. Malherbe, Th Corbard, K. Dalmasse, The Meteospace team

Abstract: High cadence observations of solar activity (active regions, flares, filaments) in the H$α$ line were performed at Meudon and Haute Provence Observatories from 1956 to 2004. More than 7 million images were recorded, mainly on 35 mm films. After a review of the scientific interest of solar surveys at high temporal resolution and the historical background, we describe the new instrument which will o… ▽ More High cadence observations of solar activity (active regions, flares, filaments) in the H$α$ line were performed at Meudon and Haute Provence Observatories from 1956 to 2004. More than 7 million images were recorded, mainly on 35 mm films. After a review of the scientific interest of solar surveys at high temporal resolution and the historical background, we describe the new instrument which will operate automatically in 2020 at the Calern station of the Côte d'Azur observatory (1270 m). It will replace the former heliographs with improved cadence, seeing and time coverage. We summarize the capabilities of the optical design and present new scientific perspectives in terms of flare onset and Moreton wave detection. △ Less

Submitted 7 January, 2020; originally announced January 2020.

Comments: 16 pages, 10 figures; Accepted for publication in Solar Physics