-
Characterization of the decametre sky at subarcminute resolution
Authors:
C. Groeneveld,
R. J. van Weeren,
E. Osinga,
W. L. Williams,
J. R. Callingham,
F. de Gasperin,
A. Botteon,
T. Shimwell,
J. M. G. H. J. de Jong,
L. F. Jansen,
G. K. Miley,
G. Brunetti,
M. Brüggen,
H. J. A. Röttgering
Abstract:
The largely unexplored decameter radio band (10-30 MHz) provides a unique window for studying a range of astronomical topics, such as auroral emission from exoplanets, inefficient cosmic ray acceleration mechanisms, fossil radio plasma, and free-free absorption. The scarcity of low-frequency studies is mainly due to the severe perturbing effects of the ionosphere. Here we present a calibration str…
▽ More
The largely unexplored decameter radio band (10-30 MHz) provides a unique window for studying a range of astronomical topics, such as auroral emission from exoplanets, inefficient cosmic ray acceleration mechanisms, fossil radio plasma, and free-free absorption. The scarcity of low-frequency studies is mainly due to the severe perturbing effects of the ionosphere. Here we present a calibration strategy that can correct for the ionosphere in the decameter band. We apply this to an observation from the Low Frequency Array (LOFAR) between 16 to 30 MHz . The resulting image covers 330 square degrees of sky at a resolution of 45", reaching a sensitivity of 12 mJy/beam. Residual ionospheric effects cause additional blurring ranging between 60 to 100". This represents an order of magnitude improvement in terms of sensitivity and resolution compared to previous decameter band observations. In the region we surveyed, we have identified four fossil plasma sources. These rare sources are believed to contain old, possibly re-energised, radio plasma originating from previous outbursts of active galactic nuclei. At least three of them are situated near the center of low-mass galaxy clusters. Notably, two of these sources display the steepest radio spectral index among all the sources detected at 23 MHz. This indicates that fossil plasma sources constitute the primary population of steep-spectrum sources at these frequencies, emphasising the large discovery potential of ground-based decameter observations.
△ Less
Submitted 8 May, 2024;
originally announced May 2024.
-
Abell 0399-Abell 0401 radio bridge spectral index: the first multifrequency detection
Authors:
G. V. Pignataro,
A. Bonafede,
G. Bernardi,
F. de Gasperin,
G. Brunetti,
T. Pasini,
F. Vazza,
N. Biava,
J. M. G. H. J. de Jong,
R. Cassano,
A. Botteon,
M. Brüggen,
H. J. A. Röttgering,
R. J. van Weeren,
T. W. Shimwell
Abstract:
Recent low-frequency radio observations at 140 MHz discovered a 3 Mpc-long bridge of diffuse emission connecting the galaxy clusters Abell 0399 and Abell 0401. We present follow-up observations at 60 MHz to constrain the spectral index of the bridge, which so far has only been detected at 140 and 144 MHz. We analysed deep (~18 hours) LOw Frequency ARray (LOFAR) Low Band Antenna (LBA) data at 60 MH…
▽ More
Recent low-frequency radio observations at 140 MHz discovered a 3 Mpc-long bridge of diffuse emission connecting the galaxy clusters Abell 0399 and Abell 0401. We present follow-up observations at 60 MHz to constrain the spectral index of the bridge, which so far has only been detected at 140 and 144 MHz. We analysed deep (~18 hours) LOw Frequency ARray (LOFAR) Low Band Antenna (LBA) data at 60 MHz to detect the bridge at very low frequencies. We then conducted a multi-frequency study with LOFAR HBA data at 144 MHz and uGMRT data at 400 MHz. Assuming second-order Fermi mechanisms for the re-acceleration of relativistic electrons driven by turbulence in the radio bridge regions, we compare the observed radio spectrum with theoretical synchrotron models. The bridge is detected in the 75'' resolution LOFAR image at 60 MHz and its emission fully connects the region between the two galaxy clusters. Between 60 MHz and 144 MHz we found an integrated spectral index value of -1.44 +\- 0.16 for the bridge emission. For the first time, we produced spectral index and related uncertainties maps for a radio bridge. We produce a radio spectrum, which show significant steepening between 144 and 400 MHz. This detection at low frequencies provides important information on the models of particle acceleration and magnetic field structure on very extended scales. The spectral index gives important clues to the origin of inter-cluster diffuse emission. The steepening of the spectrum above 144 MHz can be explained in a turbulent re-acceleration framework, assuming that the acceleration timescales are longer than ~200 Myr.
△ Less
Submitted 1 May, 2024;
originally announced May 2024.
-
Interlayer Dzyaloshinskii-Moriya interaction in synthetic ferrimagnets
Authors:
Shen Li,
Mouad Fattouhi,
Tianxun Huang,
Chen Lv,
Mark C. H. de Jong,
**zhi Li,
Xiaoyang Lin,
Felipe Garcia-Sanchez,
Eduardo Martinez,
Stéphane Mangin,
Bert Koopmans,
Weisheng Zhao,
Reinoud Lavrijsen
Abstract:
The antisymmetric interlayer exchange interaction, i.e., interlayer Dzyaloshinskii-Moriya interaction (IL-DMI) has attracted significant interest since this long-range chiral spin interaction provides a new dimension for controlling spin textures and dynamics. However, the role of IL-DMI in the field induced and spin-orbit torque (SOT) induced switching of synthetic ferrimagnets (SFi) has not been…
▽ More
The antisymmetric interlayer exchange interaction, i.e., interlayer Dzyaloshinskii-Moriya interaction (IL-DMI) has attracted significant interest since this long-range chiral spin interaction provides a new dimension for controlling spin textures and dynamics. However, the role of IL-DMI in the field induced and spin-orbit torque (SOT) induced switching of synthetic ferrimagnets (SFi) has not been uncovered. Here, we exploit interlayer chiral exchange bias fields in SFi to address both the sign and magnitude of the IL-DMI. Depending on the degree of imbalance between the two magnetic moments of the SFi, the amount of asymmetry, addressed via loop shifts of the hysteresis loops under an in-plane field reveals a unidirectional and chiral nature of the IL-DMI. The devices are then tested with SOT switching experiments and the process is examined via both transient state and steady state detection. In addition to field-free SOT switching, we find that the combination of IL-DMI and SOT give rise to multi-resistance states, which provides a possible direction for the future design of neuromorphic computing devices based on SOT. This work is a step towards characterizing and understanding the IL-DMI for spintronic applications.
△ Less
Submitted 19 March, 2024;
originally announced March 2024.
-
Cosmic evolution of FRI and FRII sources out to z=2.5
Authors:
J. M. G. H. J. de Jong,
H. J. A. Röttgering,
R. Kondapally,
B. Mingo,
R. J. van Weeren,
P. N. Best,
L. K. Morabito,
M. Magliocchetti,
J. B. R. Oonk,
A. Villarrubia-Aguilar,
F. F. Vecchi
Abstract:
Radio-loud active galactic nuclei (RLAGN) play an important role in the evolution of galaxies through the effects on their environment. The two major morphological classes are core-bright (FRI) and edge-bright (FRII) sources. With the LOw-Frequency ARray (LOFAR) we compare the FRI and FRII evolution down to lower flux densities and with larger samples than before with the aim to examine the cosmic…
▽ More
Radio-loud active galactic nuclei (RLAGN) play an important role in the evolution of galaxies through the effects on their environment. The two major morphological classes are core-bright (FRI) and edge-bright (FRII) sources. With the LOw-Frequency ARray (LOFAR) we compare the FRI and FRII evolution down to lower flux densities and with larger samples than before with the aim to examine the cosmic space density evolution for FRIs and FRIIs by analyzing their space density evolution between L_150~10^24.5 W/Hz and L_150~10^28.5 W/Hz and up to z=2.5. We construct radio luminosity functions (RLFs) from FRI and FRII catalogues based on recent data from LOFAR at 150MHz to study the space densities as a function of radio luminosity and redshift. To partly correct for selection biases and completeness, we simulate how sources appear at a range of redshifts. We report a space density enhancement from low to high redshift for FRI and FRII sources brighter than L_150~10^27 W/Hz. This is possibly related to the higher gas availability in the earlier denser universe. The constant FRI/FRII space density ratio evolution as a function of radio luminosity and redshift in our results suggests that the jet-disruption of FRIs might be primarily caused by events occurring on scales within the host galaxy, rather than being driven by changes in the overall large-scale environment. Remaining selection biases in our results also highlight the need to resolve more sources at angular scales below 40 arcsec and therefore strengthens the motivation for the further development and automation of the calibration and imaging pipeline of LOFAR data to produce images at sub-arcsecond resolution.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Controlling magnetic skyrmion nucleation with Ga+ ion irradiation
Authors:
Mark C. H. de Jong,
Bennert H. M. Smit,
Mariëlle J. Meijer,
Juriaan Lucassen,
Henk J. M. Swagten,
Bert Koopmans,
Reinoud Lavrijsen
Abstract:
In this paper, we show that magnetic skyrmion nucleation can be controlled using Ga+ ion irradiation, which manipulates the magnetic interface effects (in particular the magnetic anisotropy and Dzyaloshinskii-Moriya interaction) that govern the stability and energy cost of skyrmions in thin film systems. We systematically and quantitatively investigated what effect these changes have on the nuclea…
▽ More
In this paper, we show that magnetic skyrmion nucleation can be controlled using Ga+ ion irradiation, which manipulates the magnetic interface effects (in particular the magnetic anisotropy and Dzyaloshinskii-Moriya interaction) that govern the stability and energy cost of skyrmions in thin film systems. We systematically and quantitatively investigated what effect these changes have on the nucleation of magnetic skyrmions. Our results indicate that the energy cost of skyrmion nucleation can be reduced up to 26% in the studied dose range and that it scales approximately linearly with the square root of the domain-wall energy density. Moreover, the total number of nucleated skyrmions in irradiated devices after nucleation was found to depend linearly on the ion dose and could be doubled compared to nonirradiated devices. These results show that ion irradiation cannot only be used to enable local nucleation of skyrmions, but that it also allows for fine control of the threshold and efficiency of the nucleation process.
△ Less
Submitted 28 March, 2023; v1 submitted 27 March, 2023;
originally announced March 2023.
-
Beating ringdowns of near-degenerate mechanical resonances
Authors:
Matthijs H. J. de Jong,
Andrea Cupertino,
Dongil Shin,
Simon Gröblacher,
Farbod Alijani,
Peter G. Steeneken,
Richard A. Norte
Abstract:
Mechanical resonators that possess coupled modes with harmonic frequency relations have recently sparked interest due to their suitability for controllable energy transfer and non-Hermitian dynamics. Here, we show coupling between high Q-factor ($>\!\!10^4$) resonances with a nearly 1:1 frequency relation in spatially-symmetric microresonators. We develop and demonstrate a method to analyze their…
▽ More
Mechanical resonators that possess coupled modes with harmonic frequency relations have recently sparked interest due to their suitability for controllable energy transfer and non-Hermitian dynamics. Here, we show coupling between high Q-factor ($>\!\!10^4$) resonances with a nearly 1:1 frequency relation in spatially-symmetric microresonators. We develop and demonstrate a method to analyze their dynamical behavior based on the simultaneous and resonant detection of both spectral peaks, and validate this with experimental results. The frequency difference between the peaks modulates their ringdown, and creates a beat pattern in the linear decay. This method applies both to the externally driven and the Brownian motion (thermal) regime, and allows characterization of both linear and nonlinear parameters. The mechanism behind this method renders it broadly applicable to both optical and electrical readout, as well as to different mechanical systems. This will aid studies using near-degenerate mechanical modes, for e.g., optomechanical energy transfer, synchronization and gyroscopic sensors.
△ Less
Submitted 25 August, 2023; v1 submitted 17 November, 2022;
originally announced November 2022.
-
A deep study of A399-401: An application for wide-field facet calibration
Authors:
J. M. G. H. J. de Jong,
R. J. van Weeren,
A. Botteon,
J. B. R. Oonk,
G. Brunetti,
T. W. Shimwell,
R. Cassano,
H. J. A. Röttgering,
C. Tasse
Abstract:
We examine the particle acceleration mechanism in the Mpc-scale bridge between Abell 399 and Abell 401 and assess in particular if the synchrotron emission originates from first-order or second-order Fermi re-acceleration. We use deep (~40 hours) LOw-Frequency ARray (LOFAR) observations from Abell 399 and Abell 401 and apply improved direction-dependent calibration to produce deep radio images at…
▽ More
We examine the particle acceleration mechanism in the Mpc-scale bridge between Abell 399 and Abell 401 and assess in particular if the synchrotron emission originates from first-order or second-order Fermi re-acceleration. We use deep (~40 hours) LOw-Frequency ARray (LOFAR) observations from Abell 399 and Abell 401 and apply improved direction-dependent calibration to produce deep radio images at three different resolutions at 144 MHz. With a point-to-point analysis we find in the bridge trends between the radio emission from our new maps and X-ray emission from an XMM Newton observation. By analyzing our observations and results, we argue that second-order Fermi re-acceleration is currently the most favoured process to explain the emission from the radio bridge, where past AGN activity may be responsible for the supply of fossil plasma needed for in-situ re-acceleration. The radio halos from Abell 401 and Abell 399 are also consistent with a second-order Fermi re-acceleration model.
△ Less
Submitted 10 October, 2022; v1 submitted 28 September, 2022;
originally announced September 2022.
-
Mechanical overtone frequency combs
Authors:
Matthijs H. J. de Jong,
Adarsh Ganesan,
Andrea Cupertino,
Simon Gröblacher,
Richard A. Norte
Abstract:
Mechanical frequency combs are poised to bring the applications and utility of optical frequency combs into the mechanical domain. So far, their main challenge has been strict requirements on drive frequencies and power, which complicate operation. We demonstrate a straightforward mechanism to create a frequency comb consisting of mechanical overtones (integer multiples) of a single eigenfrequency…
▽ More
Mechanical frequency combs are poised to bring the applications and utility of optical frequency combs into the mechanical domain. So far, their main challenge has been strict requirements on drive frequencies and power, which complicate operation. We demonstrate a straightforward mechanism to create a frequency comb consisting of mechanical overtones (integer multiples) of a single eigenfrequency, by monolithically integrating a suspended dielectric membrane with a counter-propagating optical trap. The periodic optical field modulates the dielectrophoretic force on the membrane at the overtones of a membrane's motion. These overtones share a fixed frequency and phase relation, and constitute a mechanical frequency comb. The periodic optical field also creates an optothermal parametric drive that requires no additional power or external frequency reference. This combination of effects results in an easy-to-use mechanical frequency comb platform that requires no precise alignment, no additional feedback or control electronics, and only uses a single, mW continuous wave laser beam. This highlights the overtone frequency comb as the straightforward future for applications in sensing, metrology and quantum acoustics.
△ Less
Submitted 20 March, 2023; v1 submitted 13 July, 2022;
originally announced July 2022.
-
Mechanical dissipation by substrate-mode coupling in SiN resonators
Authors:
Matthijs H. J. de Jong,
Malte A. ten Wolde,
Andrea Cupertino,
Simon Gröblacher,
Peter G. Steeneken,
Richard A. Norte
Abstract:
State-of-the-art nanomechanical resonators are heralded as a central component for next-generation clocks, filters, resonant sensors and quantum technologies. To practically build these technologies will require monolithic integration of microchips, resonators and readout systems. While it is widely seen that mounting microchip substrates into a system can greatly impact the performance of high-Q…
▽ More
State-of-the-art nanomechanical resonators are heralded as a central component for next-generation clocks, filters, resonant sensors and quantum technologies. To practically build these technologies will require monolithic integration of microchips, resonators and readout systems. While it is widely seen that mounting microchip substrates into a system can greatly impact the performance of high-Q resonators, a systematic study has remained elusive, owing to the variety of physical processes and factors that influence the dissipation. Here, we analytically analyze a mechanism by which substrates couple to resonators manufactured on them, and experimentally demonstrate that this coupling can increase the mechanical dissipation of nanomechanical resonators when the resonance frequencies of resonator and substrate coincide. More generally, we then show a similar coupling mechanism can exist between two adjacent resonators. Since the substrate-mode coupling mechanism strongly depends on both the resonator position on the substrate and the mounting of the substrate, this work provides key design guidelines for high-precision nanomechanical technologies.
△ Less
Submitted 26 July, 2022; v1 submitted 2 June, 2022;
originally announced June 2022.
-
Local control of magnetic interface effects in chiral Ir$|$Co$|$Pt multilayers using Ga$^{+}$ ion irradiation
Authors:
Mark C. H. de Jong,
Mariëlle J. Meijer,
Juriaan Lucassen,
Jos van Liempt,
Henk J. M. Swagten,
Bert Koopmans,
Reinoud Lavrijsen
Abstract:
Skyrmions are topologically protected chiral spin textures that have shown promise as data carriers in future spintronic applications. They can be stabilized by the interfacial Dzyaloshinskii-Moriya interaction (iDMI) in material systems with inversion asymmetry and spin-orbit coupling, such as Ir$|$Co$|$Pt multilayers. The ability to locally tune such interface interactions, and hence the skyrmio…
▽ More
Skyrmions are topologically protected chiral spin textures that have shown promise as data carriers in future spintronic applications. They can be stabilized by the interfacial Dzyaloshinskii-Moriya interaction (iDMI) in material systems with inversion asymmetry and spin-orbit coupling, such as Ir$|$Co$|$Pt multilayers. The ability to locally tune such interface interactions, and hence the skyrmion energy, could greatly enhance the nucleation and control of skyrmions in racetrack type devices. In this work, we investigate local tuning of the iDMI and perpendicular magnetic anisotropy (PMA) using focussed Ga$^{+}$ ion beam irradiation, in an Ir$|$Co$|$Pt multilayer system. We show that the magnitude of the interface contribution to both effects can be significantly reduced by the irradiation with Ga$^{+}$ ions. This leads to a reduction by a factor two of the domain wall energy density, while still preserving the Néel character of the domain walls. Hence, we postulate that Ga$^{+}$ ion irradiation is an effective way to locally reduce the energy barrier for skyrmion nucleation, providing a novel pathway for targeted skyrmion nucleation in racetrack type devices.
△ Less
Submitted 4 October, 2021;
originally announced October 2021.
-
Spiderweb nanomechanical resonators via Bayesian optimization: inspired by nature and guided by machine learning
Authors:
Dongil Shin,
Andrea Cupertino,
Matthijs H. J. de Jong,
Peter G. Steeneken,
Miguel A. Bessa,
Richard A. Norte
Abstract:
From ultra-sensitive detectors of fundamental forces to quantum networks and sensors, mechanical resonators are enabling next-generation technologies to operate in room temperature environments. Currently, silicon nitride nanoresonators stand as a leading microchip platform in these advances by allowing for mechanical resonators whose motion is remarkably isolated from ambient thermal noise. Howev…
▽ More
From ultra-sensitive detectors of fundamental forces to quantum networks and sensors, mechanical resonators are enabling next-generation technologies to operate in room temperature environments. Currently, silicon nitride nanoresonators stand as a leading microchip platform in these advances by allowing for mechanical resonators whose motion is remarkably isolated from ambient thermal noise. However, to date, human intuition has remained the driving force behind design processes. Here, inspired by nature and guided by machine learning, a spiderweb nanomechanical resonator is developed that exhibits vibration modes which are isolated from ambient thermal environments via a novel "torsional soft-clam**" mechanism discovered by the data-driven optimization algorithm. This bio-inspired resonator is then fabricated; experimentally confirming a new paradigm in mechanics with quality factors above 1 billion in room temperature environments. In contrast to other state-of-the-art resonators, this milestone is achieved with a compact design which does not require sub-micron lithographic features or complex phononic bandgaps, making it significantly easier and cheaper to manufacture at large scales. Here we demonstrate the ability of machine learning to work in tandem with human intuition to augment creative possibilities and uncover new strategies in computing and nanotechnology.
△ Less
Submitted 13 December, 2021; v1 submitted 10 August, 2021;
originally announced August 2021.
-
Coherent mechanical noise cancellation and cooperativity competition in optomechanical arrays
Authors:
Matthijs H. J. de Jong,
Jie Li,
Claus Gärtner,
Richard A. Norte,
Simon Gröblacher
Abstract:
Studying the interplay between multiple coupled mechanical resonators is a promising new direction in the field of optomechanics. Understanding the dynamics of the interaction can lead to rich new effects, such as enhanced coupling and multi-body physics. In particular, multi-resonator optomechanical systems allow for distinct dynamical effects due to the optical cavity coherently coupling mechani…
▽ More
Studying the interplay between multiple coupled mechanical resonators is a promising new direction in the field of optomechanics. Understanding the dynamics of the interaction can lead to rich new effects, such as enhanced coupling and multi-body physics. In particular, multi-resonator optomechanical systems allow for distinct dynamical effects due to the optical cavity coherently coupling mechanical resonators. Here, we study the mechanical response of two SiN membranes and a single optical mode, and find that the cavity induces a time delay between the local and cavity-transduced thermal noises experienced by the resonators. This results in an optomechanical phase lag that causes destructive interference, cancelling the mechanical thermal noise by up to 20 dB in a controllable fashion, matching our theoretical expectation. Based on the effective coupling between membranes, we further propose, derive and measure a collective effect, cooperativity competition on mechanical dissipation, whereby the linewidth of one resonator depends on the coupling efficiency (cooperativity) of the other resonator.
△ Less
Submitted 2 February, 2022; v1 submitted 21 December, 2020;
originally announced December 2020.
-
Asymmetric depinning of chiral domain walls in ferromagnetic trilayers
Authors:
Mark C. H. de Jong,
Can Onur Avci,
Aleš Hrabec,
Pietro Gambardella
Abstract:
We show that the coupling between two ferromagnetic layers separated by a nonmagnetic spacer can be used to control the depinning of domain walls and induce unidirectional domain wall propagation. We investigated CoFeB/Ti/CoFeB trilayers where the easy axis of the magnetization of the top CoFeB layer is out-of-plane and that of the bottom layer is in-plane. Using Magneto-optic Kerr effect microsco…
▽ More
We show that the coupling between two ferromagnetic layers separated by a nonmagnetic spacer can be used to control the depinning of domain walls and induce unidirectional domain wall propagation. We investigated CoFeB/Ti/CoFeB trilayers where the easy axis of the magnetization of the top CoFeB layer is out-of-plane and that of the bottom layer is in-plane. Using Magneto-optic Kerr effect microscopy, we find that the depinning of a domain wall in the perpendicularly magnetized CoFeB layer is influenced by the orientation of the magnetization of the in-plane layer, which gives rise to a field-driven asymmetric domain expansion. This effect occurs due to the magnetic coupling between the internal magnetization of the domain wall and the magnetization of the in-plane CoFeB layer, which breaks the symmetry of up-down and down-up homochiral Néel domain walls in the perpendicular CoFeB layer. Micromagnetic simulations support these findings by showing that the interlayer coupling either opposes or favors the Dzyaloshinskii-Moriya interaction in the domain wall, thereby generating an imbalance in the depinning fields. This effect also allows for artificially controlling the chirality and dynamics of domain walls in magnetic layers lacking a strong Dzyaloshinskii-Moriya interaction.
△ Less
Submitted 23 November, 2020;
originally announced November 2020.
-
Stabilizing chiral spin-structures via an alternating Dzyaloshinskii-Moriya interaction
Authors:
Juriaan Lucassen,
Mariëlle J. Meijer,
Mark C. H. de Jong,
Rembert A. Duine,
Henk J. M. Swagten,
Bert Koopmans,
Reinoud Lavrijsen
Abstract:
The stabilization of chiral magnetic spin-structures in thin films is often attributed to the interfacial Dzyaloshinskii-Moriya interaction (DMI). Very recently, however, it has been reported that the chirality induced by the DMI can be affected by dipolar interactions. These dipolar fields tend to form Néel caps, which entails the formation of a clockwise chirality at the top of the film and a co…
▽ More
The stabilization of chiral magnetic spin-structures in thin films is often attributed to the interfacial Dzyaloshinskii-Moriya interaction (DMI). Very recently, however, it has been reported that the chirality induced by the DMI can be affected by dipolar interactions. These dipolar fields tend to form Néel caps, which entails the formation of a clockwise chirality at the top of the film and a counterclockwise chirality at the bottom. Here, we show that engineering an alternating DMI that changes sign across the film thickness, together with the tendency to form Néel caps, leads to an enhanced stability of chiral spin-structures. Micromagnetic simulations for skyrmions demonstrate that this can increase the effective DMI in a prototypical [Pt/Co/Ir] multilayer system by at least \SI{0.6}{mJ.m^{-2}}. These gains are comparable to what has been achieved using additive DMI, but more flexible as we are not limited to a select set of material combinations. We also present experimental results: by measuring equilibrium domain widths we quantify the effective DMI in [Pt/Co/Ir] multilayer systems typically used for skyrmion stabilization. Upon introducing an alternating DMI we demonstrate changes in the effective DMI that agree with our simulations. Our results provide a route towards enhancing the stability of chiral spin-structures that does not rely on enlarging the chiral interactions.
△ Less
Submitted 1 April, 2020;
originally announced April 2020.
-
Thickness dependence of unidirectional spin-Hall magnetoresistance in metallic bilayers
Authors:
Yuxiang Yin,
Dong-Soo Han,
Mark C. H. de Jong,
Reinoud Lavrijsen,
Rembert A. Duine,
Henk J. M. Swagten,
Bert Koopmans
Abstract:
A nonlinear magnetoresistance - called unidirectional spin-Hall magnetoresistance - is recently experimentally discovered in metallic bilayers consisting of a heavy metal and a ferromagnetic metal. To study the fundamental mechanism of the USMR, both ferromagnetic and heavy metallic layer thickness dependence of the USMR are presented in a Pt/Co/AlOx trilayer at room temperature. To avoid ambiguit…
▽ More
A nonlinear magnetoresistance - called unidirectional spin-Hall magnetoresistance - is recently experimentally discovered in metallic bilayers consisting of a heavy metal and a ferromagnetic metal. To study the fundamental mechanism of the USMR, both ferromagnetic and heavy metallic layer thickness dependence of the USMR are presented in a Pt/Co/AlOx trilayer at room temperature. To avoid ambiguities, second harmonic Hall measurements are used for separating spin-Hall and thermal contributions to the non-linear magnetoresistance. The experimental results are fitted by using a drift-diffusion theory, with parameters extracted from an analysis of longitudinal resistivity of the Co layer within the framework of the Fuchs-Sondheimer model. A good agreement with the theory is found, demonstrating that the USMR is governed by both the spin-Hall effect in the heavy metallic layer and the metallic diffusion process in the ferromagnetic layer.
△ Less
Submitted 17 November, 2017;
originally announced November 2017.
-
Cnidaria: fast, reference-free clustering of raw and assembled genome and transcriptome NGS data
Authors:
Saulo Alves Aflitos,
Edouard Severing,
Gabino Sanchez-Perez,
Sander Peters,
Hans de Jong,
Dick de Ridder
Abstract:
Background: Identification of biological specimens is a major requirement for a range of applications. Reference-free methods analyse unprocessed sequencing data without relying on prior knowledge, but generally do not scale to arbitrarily large genomes and arbitrarily large phylogenetic distances. Results: We present Cnidaria, a practical tool for clustering genomic and transcriptomic data with n…
▽ More
Background: Identification of biological specimens is a major requirement for a range of applications. Reference-free methods analyse unprocessed sequencing data without relying on prior knowledge, but generally do not scale to arbitrarily large genomes and arbitrarily large phylogenetic distances. Results: We present Cnidaria, a practical tool for clustering genomic and transcriptomic data with no limitation on genome size or phylogenetic distances. We successfully simultaneously clustered 169 genomic and transcriptomic datasets from 4 kingdoms, achieving 100% identification accuracy at supra-species level and 78% accuracy for species level. Discussion: CNIDARIA allows for fast, resource-efficient comparison and identification of both raw and assembled genome and transcriptome data. This can help answer both fundamental (e.g. in phylogeny, ecological diversity analysis) and practical questions (e.g. sequencing quality control, primer design).
△ Less
Submitted 17 November, 2015;
originally announced November 2015.
-
Introgression Browser: High throughput whole-genome SNP visualization
Authors:
Saulo Alves Aflitos,
Gabino Sanchez-Perez,
Dick de Ridder,
Paul Fransz,
Eric Schranz,
Hans de Jong,
Sander Peters
Abstract:
Breeding by introgressive hybridization is a pivotal strategy to broaden the genetic basis of crops. Usually, the desired traits are monitored in consecutive crossing generations by marker-assisted selection, but their analyses fail in chromosome regions where crossover recombinants are rare or not viable. Here, we present the Introgression Browser (IBROWSER), a novel bioinformatics tool aimed at…
▽ More
Breeding by introgressive hybridization is a pivotal strategy to broaden the genetic basis of crops. Usually, the desired traits are monitored in consecutive crossing generations by marker-assisted selection, but their analyses fail in chromosome regions where crossover recombinants are rare or not viable. Here, we present the Introgression Browser (IBROWSER), a novel bioinformatics tool aimed at visualizing introgressions at nucleotide or SNP accuracy. The software selects homozygous SNPs from Variant Call Format (VCF) information and filters out heterozygous SNPs, Multi-Nucleotide Polymorphisms (MNPs) and insertion-deletions (InDels). For data analysis IBROWSER makes use of sliding windows, but if needed it can generate any desired fragmentation pattern through General Feature Format (GFF) information. In an example of tomato (Solanum lycopersicum) accessions we visualize SNP patterns and elucidate both position and boundaries of the introgressions. We also show that our tool is capable of identifying alien DNA in a panel of the closely related S. pimpinellifolium by examining phylogenetic relationships of the introgressed segments in tomato. In a third example, we demonstrate the power of the IBROWSER in a panel of 600 Arabidopsis accessions, detecting the boundaries of a SNP-free region around a polymorphic 1.17 Mbp inverted segment on the short arm of chromosome 4. The architecture and functionality of IBROWSER makes the software appropriate for a broad set of analyses including SNP mining, genome structure analysis, and pedigree analysis. Its functionality, together with the capability to process large data sets and efficient visualization of sequence variation, makes IBROWSER a valuable breeding tool.
△ Less
Submitted 21 April, 2015;
originally announced April 2015.
-
Exploring genetic variation in the tomato (Solanum section Lycopersicon) clade by whole-genome sequencing
Authors:
Saulo A. Aflitos,
Elio Schijlen,
Richard Finkers,
Sandra Smit,
Jun Wang,
Gengyun Zhang,
Ning Li,
Likai Mao,
Hans de Jong,
Freek Bakker,
Barbara Gravendeel,
Timo Breit,
Rob Dirks,
Henk Huits,
Darush Struss,
Ruth Wagner,
Hans van Leeuwen,
Roeland van Ham,
Laia Fito,
Laëtitia Guigner,
Myrna Sevilla,
Philippe Ellul,
Eric W. Ganko,
Arvind Kapur,
Emmanuel Reclus
, et al. (32 additional authors not shown)
Abstract:
Genetic variation in the tomato clade was explored by sequencing a selection of 84 tomato accessions and related wild species representative for the Lycopersicon, Arcanum, Eriopersicon, and Neolycopersicon groups. We present a reconstruction of three new reference genomes in support of our comparative genome analyses. Sequence diversity in commercial breeding lines appears extremely low, indicatin…
▽ More
Genetic variation in the tomato clade was explored by sequencing a selection of 84 tomato accessions and related wild species representative for the Lycopersicon, Arcanum, Eriopersicon, and Neolycopersicon groups. We present a reconstruction of three new reference genomes in support of our comparative genome analyses. Sequence diversity in commercial breeding lines appears extremely low, indicating the dramatic genetic erosion of crop tomatoes. This is reflected by the SNP count in wild species which can exceed 10 million i.e. 20 fold higher than in crop accessions. Comparative sequence alignment reveals group, species, and accession specific polymorphisms, which explain characteristic fruit traits and growth habits in tomato accessions. Using gene models from the annotated Heinz reference genome, we observe a bias in dN/dS ratio in fruit and growth diversification genes compared to a random set of genes, which probably is the result of a positive selection. We detected highly divergent segments in wild S. lycopersicum species, and footprints of introgressions in crop accessions originating from a common donor accession. Phylogenetic relationships of fruit diversification and growth specific genes from crop accessions show incomplete resolution and are dependent on the introgression donor. In contrast, whole genome SNP information has sufficient power to resolve the phylogenetic placement of each accession in the four main groups in the Lycopersicon clade using Maximum Likelihood analyses. Phylogenetic relationships appear correlated with habitat and mating type and point to the occurrence of geographical races within these groups and thus are of practical importance for introgressive hybridization breeding. Our study illustrates the need for multiple reference genomes in support of tomato comparative genomics and Solanum genome evolution studies.
△ Less
Submitted 21 April, 2015;
originally announced April 2015.
-
The genomic landscape of meiotic crossovers and gene conversions in Arabidopsis thaliana
Authors:
Erik Wijnker,
Geo Velikkakam James,
Jia Ding,
Frank Becker,
Jonas R. Klasen,
Vimal Rawat,
Beth A. Rowan,
Daniel F. de Jong,
C. Bastiaan de Snoo,
Luis Zapata,
Bruno Huettel,
Hans de Jong,
Stephan Ossowski,
Detlef Weigel,
Maarten Koornneef,
Joost J. B. Keurentjes,
Korbinian Schneeberger
Abstract:
Knowledge of the exact distribution of meiotic crossovers (COs) and gene conversions (GCs) is essential for understanding many aspects of population genetics and evolution, from haplotype structure and long-distance genetic linkage to the generation of new allelic variants of genes. To this end, we resequenced the four products of 13 meiotic tetrads along with 10 doubled haploids derived from Arab…
▽ More
Knowledge of the exact distribution of meiotic crossovers (COs) and gene conversions (GCs) is essential for understanding many aspects of population genetics and evolution, from haplotype structure and long-distance genetic linkage to the generation of new allelic variants of genes. To this end, we resequenced the four products of 13 meiotic tetrads along with 10 doubled haploids derived from Arabidopsis thaliana hybrids. GC detection through short reads has previously been confounded by genomic rearrangements. Rigid filtering for misaligned reads allowed GC identification at high accuracy and revealed an ~80-kb transposition, which undergoes copy-number changes mediated by meiotic recombination. Non-crossover associated GCs were extremely rare most likely due to their short average length of ~25-50 bp, which is significantly shorter than the length of CO associated GCs. Overall, recombination preferentially targeted non-methylated nucleosome-free regions at gene promoters, which showed significant enrichment of two sequence motifs.
△ Less
Submitted 13 November, 2013;
originally announced November 2013.
-
SBML Qualitative Models: a model representation format and infrastructure to foster interactions between qualitative modelling formalisms and tools
Authors:
Claudine Chaouiya,
Duncan Berenguier,
Sarah M Keating,
Aurelien Naldi,
Martijn P. van Iersel,
Nicolas Rodriguez,
Andreas Dräger,
Finja Büchel,
Thomas Cokelaer,
Bryan Kowal,
Benjamin Wicks,
Emanuel Gonçalves,
Julien Dorier,
Michel Page,
Pedro T. Monteiro,
Axel von Kamp,
Ioannis Xenarios,
Hidde de Jong,
Michael Hucka,
Steffen Klamt,
Denis Thieffry,
Nicolas Le Novère,
Julio Saez-Rodriguez,
Tomáš Helikar
Abstract:
Background: Qualitative frameworks, especially those based on the logical discrete formalism, are increasingly used to model regulatory and signalling networks. A major advantage of these frameworks is that they do not require precise quantitative data, and that they are well-suited for studies of large networks. While numerous groups have developed specific computational tools that provide origin…
▽ More
Background: Qualitative frameworks, especially those based on the logical discrete formalism, are increasingly used to model regulatory and signalling networks. A major advantage of these frameworks is that they do not require precise quantitative data, and that they are well-suited for studies of large networks. While numerous groups have developed specific computational tools that provide original methods to analyse qualitative models, a standard format to exchange qualitative models has been missing.
Results: We present the System Biology Markup Language (SBML) Qualitative Models Package ("qual"), an extension of the SBML Level 3 standard designed for computer representation of qualitative models of biological networks. We demonstrate the interoperability of models via SBML qual through the analysis of a specific signalling network by three independent software tools. Furthermore, the cooperative development of the SBML qual format paved the way for the development of LogicalModel, an open-source model library, which will facilitate the adoption of the format as well as the collaborative development of algorithms to analyze qualitative models.
Conclusion: SBML qual allows the exchange of qualitative models among a number of complementary software tools. SBML qual has the potential to promote collaborative work on the development of novel computational approaches, as well as on the specification and the analysis of comprehensive qualitative models of regulatory and signalling networks.
△ Less
Submitted 7 September, 2013;
originally announced September 2013.
-
Information Storage and Retrieval for Probe Storage using Optical Diffraction Patterns
Authors:
Joost van Honschoten,
Henri de Jong,
Wabe W. Koelmans,
Thomas P. Parnell,
Oleg V. Zaboronski
Abstract:
A novel method for fast information retrieval from a probe storage device is considered. It is shown that information can be stored and retrieved using the optical diffraction patterns obtained by the illumination of a large array of cantilevers by a monochromatic light source. In thermo-mechanical probe storage, the information is stored as a sequence of indentations on the polymer medium. To ret…
▽ More
A novel method for fast information retrieval from a probe storage device is considered. It is shown that information can be stored and retrieved using the optical diffraction patterns obtained by the illumination of a large array of cantilevers by a monochromatic light source. In thermo-mechanical probe storage, the information is stored as a sequence of indentations on the polymer medium. To retrieve the information, the array of probes is actuated by applying a bending force to the cantilevers. Probes positioned over indentations experience deflection by the depth of the indentation, probes over the flat media remain un-deflected. Thus the array of actuated probes can be viewed as an irregular optical grating, which creates a data-dependent diffraction pattern when illuminated by laser light. We develop a low complexity modulation scheme, which allows the extraction of information stored in the pattern of indentations on the media from Fourier coefficients of the intensity of the diffraction pattern. We then derive a low-complexity maximum likelihood sequence detection algorithm for retrieving the user information from the Fourier coefficients. The derivation of both the modulation and the detection schemes is based on the Fraunhofer formula for data-dependent diffraction patterns. We show that for as long as the Fresnel number F<0.1, the optimal channel detector derived from Fraunhofer diffraction theory does not suffer any significant performance degradation.
△ Less
Submitted 9 January, 2012; v1 submitted 5 April, 2011;
originally announced April 2011.
-
Efficient parameter search for qualitative models of regulatory networks using symbolic model checking
Authors:
Grégory Batt,
Michel Page,
Irene Cantone,
Gregor Goessler,
Pedro T. Monteiro,
Hidde De Jong
Abstract:
Investigating the relation between the structure and behavior of complex biological networks often involves posing the following two questions: Is a hypothesized structure of a regulatory network consistent with the observed behavior? And can a proposed structure generate a desired behavior? Answering these questions presupposes that we are able to test the compatibility of network structure and b…
▽ More
Investigating the relation between the structure and behavior of complex biological networks often involves posing the following two questions: Is a hypothesized structure of a regulatory network consistent with the observed behavior? And can a proposed structure generate a desired behavior? Answering these questions presupposes that we are able to test the compatibility of network structure and behavior. We cast these questions into a parameter search problem for qualitative models of regulatory networks, in particular piecewise-affine differential equation models. We develop a method based on symbolic model checking that avoids enumerating all possible parametrizations, and show that this method performs well on real biological problems, using the IRMA synthetic network and benchmark experimental data sets. We test the consistency between the IRMA network structure and the time-series data, and search for parameter modifications that would improve the robustness of the external control of the system behavior.
△ Less
Submitted 12 May, 2010;
originally announced May 2010.
-
Temporal Logic Patterns for Querying Dynamic Models of Cellular Interaction Networks
Authors:
Pedro T. Monteiro,
Delphine Ropers,
Radu Mateescu,
Ana T. Freitas,
Hidde De Jong
Abstract:
Models of the dynamics of cellular interaction networks have become increasingly larger in recent years. Formal verification based on model checking provides a powerful technology to keep up with this increase in scale and complexity. The application of model-checking approaches is hampered, however, by the difficulty for non-expert users to formulate appropriate questions in temporal logic. In…
▽ More
Models of the dynamics of cellular interaction networks have become increasingly larger in recent years. Formal verification based on model checking provides a powerful technology to keep up with this increase in scale and complexity. The application of model-checking approaches is hampered, however, by the difficulty for non-expert users to formulate appropriate questions in temporal logic. In order to deal with this problem, we propose the use of patterns, that is, high-level query templates that capture recurring biological questions and that can be automatically translated into temporal logic. The applicability of the developed set of patterns has been investigated by the analysis of an extended model of the network of global regulators controlling the carbon starvation response in Escherichia coli.
△ Less
Submitted 11 March, 2008; v1 submitted 6 March, 2008;
originally announced March 2008.
-
Symbolic Reachability Analysis of Genetic Regulatory Networks using Qualitative Abstractions
Authors:
Grégory Batt,
Delphine Ropers,
Hidde De Jong,
Michel Page,
Johannes Geiselmann
Abstract:
The switch-like character of gene regulation has motivated the use of hybrid, discrete-continuous models of genetic regulatory networks. While powerful techniques for the analysis, verification, and control of hybrid systems have been developed, the specificities of the biological application domain pose a number of challenges, notably the absence of quantitative information on parameter values…
▽ More
The switch-like character of gene regulation has motivated the use of hybrid, discrete-continuous models of genetic regulatory networks. While powerful techniques for the analysis, verification, and control of hybrid systems have been developed, the specificities of the biological application domain pose a number of challenges, notably the absence of quantitative information on parameter values and the size and complexity of networks of biological interest. We introduce a method for the analysis of reachability properties of genetic regulatory networks that is based on a class of discontinuous piecewise-affine (PA) differential equations well-adapted to the above constraints. More specifically, we introduce a hyperrectangular partition of the state space that forms the basis for a discrete abstraction preserving the sign of the derivatives of the state variables. The resulting discrete transition system provides a conservative approximation of the qualitative dynamics of the network and can be efficiently computed in a symbolic manner from inequality constraints on the parameters. The method has been implemented in the computer tool Genetic Network Analyzer (GNA), which has been applied to the analysis of a regulatory system whose functioning is not well-understood by biologists, the nutritional stress response in the bacterium Escherichia coli.
△ Less
Submitted 28 February, 2007;
originally announced February 2007.
-
Ab-initio prediction of the electronic and optical excitations in polythiophene: isolated chains versus bulk polymer
Authors:
J. -W. van der Horst,
P. A. Bobbert,
P. H. L. de Jong,
M. A. J. Michels,
G. Brocks,
P. J. Kelly
Abstract:
We calculate the electronic and optical excitations of polythiophene using the GW approximation for the electronic self-energy, and include excitonic effects by solving the electron-hole Bethe-Salpeter equation. Two different situations are studied: excitations on isolated chains and excitations on chains in crystalline polythiophene. The dielectric tensor for the crystalline situation is obtain…
▽ More
We calculate the electronic and optical excitations of polythiophene using the GW approximation for the electronic self-energy, and include excitonic effects by solving the electron-hole Bethe-Salpeter equation. Two different situations are studied: excitations on isolated chains and excitations on chains in crystalline polythiophene. The dielectric tensor for the crystalline situation is obtained by modeling the polymer chains as polarizable line objects, with a long-wavelength polarizability tensor obtained from the ab-initio polarizability function of the isolated chain. With this model dielectric tensor we construct a screened interaction for the crystalline case, including both intra- and interchain screening. In the crystalline situation both the quasi-particle band gap and the exciton binding energies are drastically reduced in comparison with the isolated chain. However, the optical gap is hardly affected. We expect this result to be relevant for conjugated polymers in general.
△ Less
Submitted 4 April, 2000;
originally announced April 2000.
