Showing 1–49 of 49 results for author: de Gironcoli, S

Discovery of Novel Silicon Allotropes with Optimized Band Gaps to Enhance Solar Cell Efficiency through Evolutionary Algorithms and Machine Learning

Authors: Mostafa Yaghoobi, Mojtaba Alaei, Mahtab Shirazi, Nafise Rezaei, Stefano de Gironcoli

Abstract: In the pursuit of advancing solar energy technologies, this study presents 20 direct and quasi-direct band gap silicon crystalline semiconductors that satisfy the Shockley-Queisser limit, a benchmark for solar cell efficiency. Employing two evolutionary algorithm-based searches, we optimize structures and calculate fitness function using the DFTB method and Gaussian approximation potential. Follow… ▽ More In the pursuit of advancing solar energy technologies, this study presents 20 direct and quasi-direct band gap silicon crystalline semiconductors that satisfy the Shockley-Queisser limit, a benchmark for solar cell efficiency. Employing two evolutionary algorithm-based searches, we optimize structures and calculate fitness function using the DFTB method and Gaussian approximation potential. Following the preselection of structures based on energy considerations, we further optimize them using PBEsol DFT. Subsequently, we screen the structures based on their band gap, employing a DFTB method tailored for band gap calculation of silicon crystals. To validate the structural stability, we employ phonon analysis via linear regression algorithm applied to PBEsol DFT data. To ensure accurate band gap determination, we employ HSE and GW methods. Significantly, the structures unveiled in this study are of great importance due to their proven stability from both mechanical and dynamic perspectives. Furthermore, the ductility and low density of certain structures enhance their potential application. Moreover, the study harnesses various machine learning algorithms to develop a predictive model for the band gap energy of these silicon structures. Input data for machine learning models are derived from structural MBTR and SOAP descriptors, as well as DFT outputs. Notably, the results reveal that features extracted from DFT outperform the MBTR and SOAP descriptors. △ Less

Submitted 24 June, 2024; v1 submitted 21 June, 2024; originally announced June 2024.

Comments: 12 pages, 5 figures, 5 tables

LATTE: an atomic environment descriptor based on Cartesian tensor contractions

Authors: Franco Pellegrini, Stefano de Gironcoli, Emine Küçükbenli

Abstract: We propose a new descriptor for local atomic environments, to be used in combination with machine learning models for the construction of interatomic potentials. The Local Atomic Tensors Trainable Expansion (LATTE) allows for the efficient construction of a variable number of many-body terms with learnable parameters, resulting in a descriptor that is efficient, expressive, and can be scaled to su… ▽ More We propose a new descriptor for local atomic environments, to be used in combination with machine learning models for the construction of interatomic potentials. The Local Atomic Tensors Trainable Expansion (LATTE) allows for the efficient construction of a variable number of many-body terms with learnable parameters, resulting in a descriptor that is efficient, expressive, and can be scaled to suit different accuracy and computational cost requirements. We compare this new descriptor to existing ones on several systems, showing it to be competitive with very fast potentials at one end of the spectrum, and extensible to an accuracy close to the state of the art. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Comments: 7 pages, 1 figure

Growing borophene on metal substrates: a theoretical study of the role of oxygen on Al(111)

Authors: Mandana Safari, Erik Vesselli, Stefano de Gironcoli, Stefano Baroni

Abstract: Charge transfer from a metal substrate stabilizes honeycomb borophene, whose electron deficit would otherwise spoil the hexagonal order of a $π$-bonded 2D atomic network. However, the coupling between the substrate and the boron overlayer may result in the formation of strong chemical bonds that would compromise the electronic properties of the overlayer. In this paper we present a theoretical stu… ▽ More Charge transfer from a metal substrate stabilizes honeycomb borophene, whose electron deficit would otherwise spoil the hexagonal order of a $π$-bonded 2D atomic network. However, the coupling between the substrate and the boron overlayer may result in the formation of strong chemical bonds that would compromise the electronic properties of the overlayer. In this paper we present a theoretical study, based on state-of-the-art density-functional and genetic-optimization techniques, of the electronic and structural properties of borophene grown on Al(111), with emphasis on the impact of oxygen on the strength of the coupling between substrate and overlayer. While our results confirm the formation of Al-B bonds, they also predict that oxygen do** reduces charge transfer between aluminum and borophene, thus allowing modulation of their strength and paving the way to engineering the electronic properties of 2D-supported borophene sheets for industrial applications. Our study is completed by a thorough study of the thermodynamic stability of the oxygenated borophene-Al(111) interface. △ Less

Submitted 31 October, 2022; v1 submitted 16 June, 2022; originally announced June 2022.

Mathematical Analysis and Numerical Approximations of Density Functional Theory Models for Metallic Systems

Authors: Xiaoying Dai, Stefano de Gironcoli, Bin Yang, Aihui Zhou

Abstract: In this paper, we investigate the energy minimization model of the ensemble Kohn-Sham density functional theory for metallic systems, in which a pseudo-eigenvalue matrix and a general smearing approach are involved. We study the invariance and the existence of the minimizer of the energy functional. We propose an adaptive double step size strategy and the corresponding preconditioned conjugate gra… ▽ More In this paper, we investigate the energy minimization model of the ensemble Kohn-Sham density functional theory for metallic systems, in which a pseudo-eigenvalue matrix and a general smearing approach are involved. We study the invariance and the existence of the minimizer of the energy functional. We propose an adaptive double step size strategy and the corresponding preconditioned conjugate gradient methods for solving the energy minimization model. Under some mild but reasonable assumptions, we prove the global convergence of our algorithms. Numerical experiments show that our algorithms are efficient, especially for large scale metallic systems. In particular, our algorithms produce convergent numerical approximations for some metallic systems, for which the traditional self-consistent field iterations fail to converge. △ Less

Submitted 18 January, 2022; originally announced January 2022.

Comments: 45 pages

Data-driven simulation and characterisation of gold nanoparticle melting

Authors: Claudio Zeni, Kevin Rossi, Theodore Pavloudis, Joseph Kioseoglou, Stefano de Gironcoli, Richard Palmer, Francesca Baletto

Abstract: The simulation and analysis of the thermal stability of nanoparticles, a step** stone towards their application in technological devices, require fast and accurate force fields, in conjunction with effective characterisation methods. In this work, we develop efficient, transferable, and interpretable machine learning force fields for gold nanoparticles based on data gathered from Density Functio… ▽ More The simulation and analysis of the thermal stability of nanoparticles, a step** stone towards their application in technological devices, require fast and accurate force fields, in conjunction with effective characterisation methods. In this work, we develop efficient, transferable, and interpretable machine learning force fields for gold nanoparticles based on data gathered from Density Functional Theory calculations. We use them to investigate the thermodynamic stability of gold nanoparticles of different sizes (1 to 6 nm), containing up to 6266 atoms, concerning a solid-liquid phase change through molecular dynamics simulations. We predict nanoparticle melting temperatures in good agreement with available experimental data. Furthermore, we characterize the solid-liquid phase change mechanism employing an unsupervised learning scheme to categorize local atomic environments. We thus provide a data-driven definition of liquid atomic arrangements in the inner and surface regions of a nanoparticle and employ it to show that melting initiates at the outer layers. △ Less

Submitted 22 April, 2022; v1 submitted 1 July, 2021; originally announced July 2021.

Comments: 28 pages, 22 figures

Journal ref: Nature Communications volume 12, Article number: 6056 (2021)

Compact atomic descriptors enable accurate predictions via linear models

Authors: Claudio Zeni, Kevin Rossi, Aldo Glielmo, Stefano De Gironcoli

Abstract: We probe the accuracy of linear ridge regression employing a three-body local density representation derived from the atomic cluster expansion. We benchmark the accuracy of this framework in the prediction of formation energies and atomic forces in molecules and solids. We find that such a simple regression framework performs on par with state-of-the-art machine learning methods which are, in most… ▽ More We probe the accuracy of linear ridge regression employing a three-body local density representation derived from the atomic cluster expansion. We benchmark the accuracy of this framework in the prediction of formation energies and atomic forces in molecules and solids. We find that such a simple regression framework performs on par with state-of-the-art machine learning methods which are, in most cases, more complex and more computationally demanding. Subsequently, we look for ways to sparsify the descriptor and further improve the computational efficiency of the method. To this aim, we use both principal component analysis and least absolute shrinkage operator regression for energy fitting on six single-element datasets. Both methods highlight the possibility of constructing a descriptor that is four times smaller than the original with a similar or even improved accuracy. Furthermore, we find that the reduced descriptors share a sizable fraction of their features across the six independent datasets, hinting at the possibility of designing material-agnostic, optimally compressed, and accurate descriptors. △ Less

Submitted 22 April, 2022; v1 submitted 24 May, 2021; originally announced May 2021.

Comments: 10 pages, 8 figures

Journal ref: J. Chem. Phys. 154, 224112 (2021)

Quantum ESPRESSO toward the exascale

Authors: Paolo Giannozzi, Oscar Baseggio, Pietro Bonfà, Davide Brunato, Roberto Car, Ivan Carnimeo, Carlo Cavazzoni, Stefano de Gironcoli, Pietro Delugas, Fabrizio Ferrari Ruffino, Andrea Ferretti, Nicola Marzari, Iurii Timrov, Andrea Urru, Stefano Baroni

Abstract: Quantum ESPRESSO is an open-source distribution of computer codes for quantum-mechanical materials modeling, based on density-functional theory, pseudopotentials, and plane waves, and renowned for its performance on a wide range of hardware architectures, from laptops to massively parallel computers, as well as for the breadth of its applications. In this paper we present a motivation and brief re… ▽ More Quantum ESPRESSO is an open-source distribution of computer codes for quantum-mechanical materials modeling, based on density-functional theory, pseudopotentials, and plane waves, and renowned for its performance on a wide range of hardware architectures, from laptops to massively parallel computers, as well as for the breadth of its applications. In this paper we present a motivation and brief review of the ongoing effort to port Quantum ESPRESSO onto heterogeneous architectures based on hardware accelerators, which will overcome the energy constraints that are currently hindering the way towards exascale computing. △ Less

Submitted 22 April, 2021; v1 submitted 21 April, 2021; originally announced April 2021.

Journal ref: J. Chem. Phys. 152, 154105 (2020)

A Systematic Approach to Generating Accurate Neural Network Potentials: the Case of Carbon

Authors: Yusuf Shaidu, Emine Kucukbenli, Ruggero Lot, Franco Pellegrini, Efthimios Kaxiras, Stefano de Gironcoli

Abstract: Availability of affordable and widely applicable interatomic potentials is the key needed to unlock the riches of modern materials modelling. Artificial neural network based approaches for generating potentials are promising; however neural network training requires large amounts of data, sampled adequately from an often unknown potential energy surface. Here we propose a self-consistent approach… ▽ More Availability of affordable and widely applicable interatomic potentials is the key needed to unlock the riches of modern materials modelling. Artificial neural network based approaches for generating potentials are promising; however neural network training requires large amounts of data, sampled adequately from an often unknown potential energy surface. Here we propose a self-consistent approach that is based on crystal structure prediction formalism and is guided by unsupervised data analysis, to construct an accurate, inexpensive and transferable artificial neural network potential. Using this approach, we construct an interatomic potential for Carbon and demonstrate its ability to reproduce first principles results on elastic and vibrational properties for diamond, graphite and graphene, as well as energy ordering and structural properties of a wide range of crystalline and amorphous phases. △ Less

Submitted 9 November, 2020; originally announced November 2020.

The CECAM Electronic Structure Library and the modular software development paradigm

Authors: Micael J. T. Oliveira, Nick Papior, Yann Pouillon, Volker Blum, Emilio Artacho, Damien Caliste, Fabiano Corsetti, Stefano de Gironcoli, Alin M. Elena, Alberto Garcia, Victor M. Garcia-Suarez, Luigi Genovese, William P. Huhn, Georg Huhs, Sebastian Kokott, Emine Kucukbenli, Ask H. Larsen, Alfio Lazzaro, Irina V. Lebedeva, Yingzhou Li, David Lopez-Duran, Pablo Lopez-Tarifa, Martin Luders, Miguel A. L. Marques, Jan Minar , et al. (12 additional authors not shown)

Abstract: First-principles electronic structure calculations are very widely used thanks to the many successful software packages available. Their traditional coding paradigm is monolithic, i.e., regardless of how modular its internal structure may be, the code is built independently from others, from the compiler up, with the exception of linear-algebra and message-passing libraries. This model has been qu… ▽ More First-principles electronic structure calculations are very widely used thanks to the many successful software packages available. Their traditional coding paradigm is monolithic, i.e., regardless of how modular its internal structure may be, the code is built independently from others, from the compiler up, with the exception of linear-algebra and message-passing libraries. This model has been quite successful for decades. The rapid progress in methodology, however, has resulted in an ever increasing complexity of those programs, which implies a growing amount of replication in coding and in the recurrent re-engineering needed to adapt to evolving hardware architecture. The Electronic Structure Library (\esl) was initiated by CECAM (European Centre for Atomic and Molecular Calculations) to catalyze a paradigm shift away from the monolithic model and promote modularization, with the ambition to extract common tasks from electronic structure programs and redesign them as free, open-source libraries. They include "heavy-duty" ones with a high degree of parallelisation, and potential for adaptation to novel hardware within them, thereby separating the sophisticated computer science aspects of performance optimization and re-engineering from the computational science done by scientists when implementing new ideas. It is a community effort, undertaken by developers of various successful codes, now facing the challenges arising in the new model. This modular paradigm will improve overall coding efficiency and enable specialists (computer scientists or computational scientists) to use their skills more effectively. It will lead to a more sustainable and dynamic evolution of software as well as lower barriers to entry for new developers. △ Less

Submitted 24 June, 2020; v1 submitted 11 May, 2020; originally announced May 2020.

Comments: Revised version as finally accepted by J. Chem. Phys. to appear within the Special Topic in Electronic Structure Software (version prior to JCP's typesetting and proofs)

Hubbard-corrected density functional perturbation theory with ultrasoft pseudopotentials

Authors: Andrea Floris, Iurii Timrov, Burak Himmetoglu, Nicola Marzari, Stefano de Gironcoli, Matteo Cococcioni

Abstract: We present in full detail a newly developed formalism enabling density functional perturbation theory (DFPT) calculations from a DFT+$U$ ground state. The implementation includes ultrasoft pseudopotentials and is valid for both insulating and metallic systems. It aims at fully exploiting the versatility of DFPT combined with the low-cost DFT+$U$ functional. This allows to avoid computationally int… ▽ More We present in full detail a newly developed formalism enabling density functional perturbation theory (DFPT) calculations from a DFT+$U$ ground state. The implementation includes ultrasoft pseudopotentials and is valid for both insulating and metallic systems. It aims at fully exploiting the versatility of DFPT combined with the low-cost DFT+$U$ functional. This allows to avoid computationally intensive frozen-phonon calculations when DFT+$U$ is used to eliminate the residual electronic self-interaction from approximate functionals and to capture the localization of valence electrons e.g. on $d$ or $f$ states. In this way, the effects of electronic localization (possibly due to correlations) are consistently taken into account in the calculation of specific phonon modes, Born effective charges, dielectric tensors and in quantities requiring well converged sums over many phonon frequencies, as phonon density of states and free energies. The new computational tool is applied to two representative systems, namely CoO, a prototypical transition metal monoxide and LiCoO$_2$, a material employed for the cathode of Li-ion batteries. The results show the effectiveness of our formalism to capture in a quantitatively reliable way the vibrational properties of systems with localized valence electrons. △ Less

Submitted 20 February, 2020; v1 submitted 14 October, 2019; originally announced October 2019.

Comments: 18 pages, 3 figures (Supplemental Material: 4 pages, 6 figures)

Journal ref: Phys. Rev. B 101, 064305 (2020)

Beyond the random phase approximation with a local exchange vertex

Authors: Maria Hellgren, Nicola Colonna, Stefano de Gironcoli

Abstract: With the aim of constructing an electronic structure approach that systematically goes beyond the GW and random phase approximation (RPA) we introduce a vertex correction based on the exact-exchange (EXX) potential of time-dependent density functional theory. The EXX vertex function is constrained to be local but is expected to capture similar physics as the Hartree-Fock vertex. With the EXX verte… ▽ More With the aim of constructing an electronic structure approach that systematically goes beyond the GW and random phase approximation (RPA) we introduce a vertex correction based on the exact-exchange (EXX) potential of time-dependent density functional theory. The EXX vertex function is constrained to be local but is expected to capture similar physics as the Hartree-Fock vertex. With the EXX vertex we then consistently unify different beyond-RPA approaches such as the various re-summations of RPA with exchange (RPAx) and the second order screened exchange (SOSEX) approximation. The theoretical analysis is supported by numerical studies on the hydrogen dimer and the electron gas, and we discuss the importance of including the vertex correction in both the screened interaction and the self energy. Finally, we give details on our implementation within the plane-wave pseudo potential framework and demonstrate the excellent performance of the different RPAx methods in describing the energetics of hydrogen and van der Waals bonds. △ Less

Submitted 27 April, 2018; originally announced April 2018.

Comments: 12 pages, 8 figures

Journal ref: Phys. Rev. B 98, 045117 (2018)

Advanced capabilities for materials modelling with Quantum ESPRESSO

Authors: P. Giannozzi, O. Andreussi, T. Brumme, O. Bunau, M. Buongiorno Nardelli, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, M. Cococcioni, N. Colonna, I. Carnimeo, A. Dal Corso, S. de Gironcoli, P. Delugas, R. A. DiStasio Jr., A. Ferretti, A. Floris, G. Fratesi, G. Fugallo, R. Gebauer, U. Gerstmann, F. Giustino, T. Gorni, J. Jia , et al. (25 additional authors not shown)

Abstract: Quantum ESPRESSO is an integrated suite of open-source computer codes for quantum simulations of materials using state-of-the art electronic-structure techniques, based on density-functional theory, density-functional perturbation theory, and many-body perturbation theory, within the plane-wave pseudo-potential and projector-augmented-wave approaches. Quantum ESPRESSO owes its popularity to the wi… ▽ More Quantum ESPRESSO is an integrated suite of open-source computer codes for quantum simulations of materials using state-of-the art electronic-structure techniques, based on density-functional theory, density-functional perturbation theory, and many-body perturbation theory, within the plane-wave pseudo-potential and projector-augmented-wave approaches. Quantum ESPRESSO owes its popularity to the wide variety of properties and processes it allows to simulate, to its performance on an increasingly broad array of hardware architectures, and to a community of researchers that rely on its capabilities as a core open-source development platform to implement theirs ideas. In this paper we describe recent extensions and improvements, covering new methodologies and property calculators, improved parallelization, code modularization, and extended interoperability both within the distribution and with external software. △ Less

Submitted 28 September, 2017; originally announced September 2017.

Comments: Psi-k highlight September 2017: psi-k.net/dowlnload/highlights/Highlight_137.pdf; J. Phys.: Condens. Matter, accepted

Journal ref: J. Phys.: Condens. Matter 29, 465901 (2017)

A parallel orbital-updating based plane-wave basis method for electronic structure calculations

Authors: Yan Pan, Xiaoying Dai, Stefano de Gironcoli, Xin-Gao Gong, Gian-Marco Rignanese, Aihui Zhou

Abstract: Motivated by the recently proposed parallel orbital-updating approach in real space method, we propose a parallel orbital-updating based plane-wave basis method for electronic structure calculations, for solving the corresponding eigenvalue problems. In addition, we propose two new modified parallel orbital-updating methods. Compared to the traditional plane-wave methods, our methods allow for two… ▽ More Motivated by the recently proposed parallel orbital-updating approach in real space method, we propose a parallel orbital-updating based plane-wave basis method for electronic structure calculations, for solving the corresponding eigenvalue problems. In addition, we propose two new modified parallel orbital-updating methods. Compared to the traditional plane-wave methods, our methods allow for two-level parallelization, which is particularly interesting for large scale parallelization. Numerical experiments show that these new methods are more reliable and efficient for large scale calculations on modern supercomputers △ Less

Submitted 13 February, 2017; originally announced February 2017.

Isobaric first-principles molecular dynamics of liquid water with nonlocal van der Waals interactions

Authors: Giacomo Miceli, Stefano de Gironcoli, Alfredo Pasquarello

Abstract: We investigate the structural properties of liquid water at near ambient conditions using first-principles molecular dynamics simulations based on a semilocal density functional augmented with nonlocal van der Waals interactions. The adopted scheme offers the advantage of simulating liquid water at essentially the same computational cost of standard semilocal functionals. Applied to the water dime… ▽ More We investigate the structural properties of liquid water at near ambient conditions using first-principles molecular dynamics simulations based on a semilocal density functional augmented with nonlocal van der Waals interactions. The adopted scheme offers the advantage of simulating liquid water at essentially the same computational cost of standard semilocal functionals. Applied to the water dimer and to ice Ih, we find that the hydrogen-bond energy is only slightly enhanced compared to a standard semilocal functional. We simulate liquid water through molecular dynamics in the NpH statistical ensemble allowing for fluctuations of the system density. The structure of the liquid departs from that found with a semilocal functional leading to more compact structural arrangements. This indicates that the directionality of the hydrogen-bond interaction has a diminished role as compared to the overall attractions, as expected when dispersion interactions are accounted for. This is substantiated through a detailed analysis comprising the study of the partial radial distribution functions, various local order indices, the hydrogen-bond network, and the selfdiffusion coefficient. The explicit treatment of the van der Waals interactions leads to an overall improved description of liquid water. △ Less

Submitted 28 July, 2016; originally announced July 2016.

Journal ref: J. Chem. Phys. 142, 034501 (2015)

Crystal Structure Prediction of Molecular Crystals from First Principles: Are we there yet?

Authors: Cong Huy Pham, Emine Kucukbenli, Stefano de Gironcoli

Abstract: Accurate molecular crystal structure prediction is a fundamental goal in academic and industrial condensed matter research and polymorphism is arguably the biggest obstacle on the way. We tackle this challenge in the difficult case of the repeatedly studied, abundantly used aminoacid Glycine that hosts still little-known phase transitions and we illustrate the current state of the field through th… ▽ More Accurate molecular crystal structure prediction is a fundamental goal in academic and industrial condensed matter research and polymorphism is arguably the biggest obstacle on the way. We tackle this challenge in the difficult case of the repeatedly studied, abundantly used aminoacid Glycine that hosts still little-known phase transitions and we illustrate the current state of the field through this example. We demonstrate that the combination of recent progress in structure search algorithms with the latest advances in the description of van der Waals interactions in Density Functional Theory, supported by data-mining analysis, enables a leap in predictive power: we resolve, without prior empirical input, all known phases of glycine, as well as the structure of the previously unresolved $ζ$ phase after a decade of its experimental observation [Boldyreva et al. \textit{Z. Kristallogr.} \textbf{2005,} \textit{220,} 50-57]. The search for the well-established $α$ phase instead reveals the remaining challenges in exploring a polymorphic landscape. △ Less

Submitted 2 May, 2016; originally announced May 2016.

Molecular bonding with the RPAx: from weak dispersion forces to strong correlation

Authors: Nicola Colonna, Maria Hellgren, Stefano de Gironcoli

Abstract: In a recent article [Phys. Rev. B 90, 125102 (2014)] we showed that the random phase approximation with exchange (RPAx) gives accurate total energies for a diverse set of systems including the high and low density regime of the homogeneous electron gas, the N$_2$ molecule, and the H$_2$ molecule at dissociation. In this work, we present results for the van der Waals bonded Ar$_2$ and Kr$_2$ dimers… ▽ More In a recent article [Phys. Rev. B 90, 125102 (2014)] we showed that the random phase approximation with exchange (RPAx) gives accurate total energies for a diverse set of systems including the high and low density regime of the homogeneous electron gas, the N$_2$ molecule, and the H$_2$ molecule at dissociation. In this work, we present results for the van der Waals bonded Ar$_2$ and Kr$_2$ dimers and demonstrate that the RPAx gives superior dispersion forces as compared to the RPA. We then show that this improved description is crucial for the bond formation of the Mg$_2$ molecule. In addition, the RPAx performs better for the Be$_2$ dissociation curve at large nuclear separation but, similar to the RPA, fails around equilibrium due to the build up of a large repulsion hump. For the strongly correlated LiH molecule at dissociation we have also calculated the RPAx potential and find that the correlation peak at the bond mid-point is overestimated as compared to the RPA and the exact result. The step feature is missing and hence the delocalisation error is comparable to the RPA. This is further illustrated by a smooth energy versus fractional charge curve and a poor description of the LiH dipole moment at dissociation. △ Less

Submitted 2 March, 2016; v1 submitted 23 October, 2015; originally announced October 2015.

Journal ref: Phys. Rev. B 93, 195108 (2016)

Correlation energy within exact-exchange ACFD theory: systematic development and simple approximations

Authors: Nicola Colonna, Maria Hellgren, Stefano de Gironcoli

Abstract: We have calculated the correlation energy of the homogeneous electron gas (HEG) and the dissociation energy curves of molecules with covalent bonds from a novel implementation of the adiabatic connection fluctuation dissipation (ACFD) expression including the exact exchange (EXX) kernel. The EXX kernel is defined from first order perturbation theory and used in the Dyson equation of time-dependent… ▽ More We have calculated the correlation energy of the homogeneous electron gas (HEG) and the dissociation energy curves of molecules with covalent bonds from a novel implementation of the adiabatic connection fluctuation dissipation (ACFD) expression including the exact exchange (EXX) kernel. The EXX kernel is defined from first order perturbation theory and used in the Dyson equation of time-dependent density functional theory. Within this approximation (RPAx), the correlation energies of the HEG are significantly improved with respect to the RPA up to densities of the order of $r_s \approx 10$. However, beyond this value, the RPAx response function exhibits an unphysical divergence and the approximation breaks down. Total energies of molecules at equilibrium are also highly accurate but we find a similar instability at stretched geometries. Staying within an exact first order approximation to the response function we use an alternative resummation of the higher order terms. This slight redefinition of RPAx fixes the instability in total energy calculations without compromising the overall accuracy of the approach. △ Less

Submitted 1 September, 2014; originally announced September 2014.

Projector augmented-wave and all-electron calculations across the periodic table: a comparison of structural and energetic properties

Authors: E. Kucukbenli, M. Monni, B. I. Adetunji, X. Ge, G. A. Adebayo, N. Marzari, S. de Gironcoli, A. Dal Corso

Abstract: We construct a reference database of materials properties calculated using density-functional theory in the local or generalized-gradient approximation, and an all-electron or a projector augmented-wave (PAW) formulation, for verification and validation of first-principles simulations. All-electron calculations use the full-potential linearised augmented-plane wave method, as implemented in the \t… ▽ More We construct a reference database of materials properties calculated using density-functional theory in the local or generalized-gradient approximation, and an all-electron or a projector augmented-wave (PAW) formulation, for verification and validation of first-principles simulations. All-electron calculations use the full-potential linearised augmented-plane wave method, as implemented in the \texttt{Elk} open-source code, while PAW calculations use the datasets developed by some of us in the open-source \texttt{PSlibrary} repository and the \texttt{Quantum ESPRESSO} distribution. We first calculate lattice parameters, bulk moduli, and energy differences for alkaline metals, alkaline earths, and $3d$ and $4d$ transition metals in three ideal, reference phases (simple cubic, fcc, and bcc), representing a standardized crystalline monoatomic solid-state test. Then, as suggested by K. Lejaeghere {\it et al.}, [Critical Reviews in Solid State and Material Sciences 39, p 1 (2014)], we compare the equations of state for all elements, except lanthanides and actinides, in their experimental phase (or occasionally a simpler, closely related one). PAW and all-electron energy differences and structural parameters agree in most cases within a few meV/atom and a fraction of a percent, respectively. This level of agreement, comparable with the previous study, includes also other PAW and all-electron data from the electronic-structure codes \texttt{VASP} and \texttt{WIEN2K}, and underscores the overall reliability of current, state-of-the-art electronic-structure calculations. At the same time, discrepancies that arise even within the same formulation for simple, fundamental structural properties point to the urgent need of establishing standards for verification and validation, reference data sets, and careful refinements of the computational approaches used. △ Less

Submitted 11 April, 2014; originally announced April 2014.

Comments: 13 pages, 7 figures

Hubbard-corrected DFT energy functionals: the LDA+U description of correlated systems

Authors: Burak Himmetoglu, Andrea Floris, Stefano de Gironcoli, Matteo Cococcioni

Abstract: The aim of this review article is to assess the descriptive capabilities of the Hubbard-rooted LDA+U method and to clarify the conditions under which it can be expected to be most predictive. The paper illustrates the theoretical foundation of LDA+U and prototypical applications to the study of correlated materials, discusses the most relevant approximations used in its formulation, and makes a co… ▽ More The aim of this review article is to assess the descriptive capabilities of the Hubbard-rooted LDA+U method and to clarify the conditions under which it can be expected to be most predictive. The paper illustrates the theoretical foundation of LDA+U and prototypical applications to the study of correlated materials, discusses the most relevant approximations used in its formulation, and makes a comparison with other approaches also developed for similar purposes. Open "issues" of the method are also discussed, including the calculation of the electronic couplings (the Hubbard U), the precise expression of the corrective functional and the possibility to use LDA+U for other classes of materials. The second part of the article presents recent extensions to the method and illustrates the significant improvements they have obtained in the description of several classes of different systems. The conclusive section finally discusses possible future developments of LDA+U to further enlarge its predictive power and its range of applicability. △ Less

Submitted 12 September, 2013; originally announced September 2013.

Comments: 45 pages, 14 figures, 4 tables International Journal of Quantum Chemistry (2013)

{\it Ab initio} $^{27}Al$ NMR chemical shifts and quadrupolar parameters for $Al_2O_3$ phases and their precursors

Authors: Ary R. Ferreira, Emine Küçükbenli, Alexandre A. Leitão, Stefano de Gironcoli

Abstract: The Gauge-Including Projector Augmented Wave (GIPAW) method, within the Density Functional Theory (DFT) Generalized Gradient Approximation (GGA) framework, is applied to compute solid state NMR parameters for $^{27}Al$ in the $α$, $θ$, and $κ$ aluminium oxide phases and their gibbsite and boehmite precursors. The results for well-established crystalline phases compare very well with available expe… ▽ More The Gauge-Including Projector Augmented Wave (GIPAW) method, within the Density Functional Theory (DFT) Generalized Gradient Approximation (GGA) framework, is applied to compute solid state NMR parameters for $^{27}Al$ in the $α$, $θ$, and $κ$ aluminium oxide phases and their gibbsite and boehmite precursors. The results for well-established crystalline phases compare very well with available experimental data and provide confidence in the accuracy of the method. For $γ$-alumina, four structural models proposed in the literature are discussed in terms of their ability to reproduce the experimental spectra also reported in the literature. Among the considered models, the $Fd\bar{3}m$ structure proposed by Paglia {\it et al.} [Phys. Rev. B {\bf 71}, 224115 (2005)] shows the best agreement. We attempt to link the theoretical NMR parameters to the local geometry. Chemical shifts depend on coordination number but no further correlation is found with geometrical parameters. Instead our calculations reveal that, within a given coordination number, a linear correlation exists between chemical shifts and Born effective charges. △ Less

Submitted 2 October, 2011; originally announced October 2011.

Quantum ESPRESSO: a modular and open-source software project for quantum simulations of materials

Authors: P. Giannozzi, S. Baroni, N. Bonini, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, G. L. Chiarotti, m. Cococcioni, I. Dabo, A. Dal Corso, S. Fabris, G. Fratesi, S. de Gironcoli, R. Gebauer, U. Gerstmann, C. Gougoussis, A. Kokalj, M. Lazzeri, L. Martin-Samos, N. Marzari, F. Mauri, R. Mazzarello, S. Paolini, A. Pasquarello , et al. (8 additional authors not shown)

Abstract: Quantum ESPRESSO is an integrated suite of computer codes for electronic-structure calculations and materials modeling, based on density-functional theory, plane waves, and pseudopotentials (norm-conserving, ultrasoft, and projector-augmented wave). Quantum ESPRESSO stands for "opEn Source Package for Research in Electronic Structure, Simulation, and Optimization". It is freely available to rese… ▽ More Quantum ESPRESSO is an integrated suite of computer codes for electronic-structure calculations and materials modeling, based on density-functional theory, plane waves, and pseudopotentials (norm-conserving, ultrasoft, and projector-augmented wave). Quantum ESPRESSO stands for "opEn Source Package for Research in Electronic Structure, Simulation, and Optimization". It is freely available to researchers around the world under the terms of the GNU General Public License. Quantum ESPRESSO builds upon newly-restructured electronic-structure codes that have been developed and tested by some of the original authors of novel electronic-structure algorithms and applied in the last twenty years by some of the leading materials modeling groups worldwide. Innovation and efficiency are still its main focus, with special attention paid to massively-parallel architectures, and a great effort being devoted to user friendliness. Quantum ESPRESSO is evolving towards a distribution of independent and inter-operable codes in the spirit of an open-source project, where researchers active in the field of electronic-structure calculations are encouraged to participate in the project by contributing their own codes or by implementing their own ideas into existing codes. △ Less

Submitted 26 July, 2009; v1 submitted 14 June, 2009; originally announced June 2009.

Comments: 36 pages, 5 figures, resubmitted to J.Phys.: Condens. Matter

Journal ref: J. Phys.: Condens. Matter 21, 395502 (2009)

A new look on the nature of high-spin to low-spin transition in Fe2O3

Authors: Dipta Bhanu Ghosh, Stefano de Gironcoli

Abstract: Iron sesquioxide (Fe2O3) displays pressure and temperature induced spin and structural transitions. Our calculations show that, density functional theory (DFT), in the generalized gradient approximation (GGA) scheme, is capable of capturing both the transitions. The ambient pressure corundum type phase (hematite or alpha-Fe2O3), having R_3c symmetry, gets distorted by the application of pressure… ▽ More Iron sesquioxide (Fe2O3) displays pressure and temperature induced spin and structural transitions. Our calculations show that, density functional theory (DFT), in the generalized gradient approximation (GGA) scheme, is capable of capturing both the transitions. The ambient pressure corundum type phase (hematite or alpha-Fe2O3), having R_3c symmetry, gets distorted by the application of pressure and transforms to a distorted corundum type or Rh2O3(II) phase with Pbcn symmetry, in agreement with recent experiments. GGA + U calculations show the same trend but shift the transition pressures to higher values. Experimentally, the onset of the structural transition begins in the vicinity of the spin transition pressure and whether the system undergoes spin transition in the corundum type (HP1) or in the Rh2O3(II) type (HP2) phase, is still a controversial issue. With a relatively simple, but general, octahedral structural parameter, Voct (the octahedral volume around iron ions), we show that in order to acquire a low spin (LS) state from a high spin (HS) one, the system does not necessarily need to change the crystal structure. Rather, the spin transition is a phenomenon that concerns the cation octahedra and the spin state of the system depends mainly on the value of Voct, which is governed by two distinct equations of state, separated by a well defined volume gap, for the HS and LS states respectively. Analysis of the results on the basis of octahedral volume allows to sum up and bridge the gap between two experimental results and thus provides a better description of the system in the region of interest. △ Less

Submitted 20 May, 2009; originally announced May 2009.

Comments: 7 pages, 5 figures

Structural and spin transitions in Fe$_{2}$O$_{3}$

Authors: Dipta Bhanu Ghosh, Stefano de Gironcoli

Abstract: First principles density functional calculations for Fe$_{2}$O$_{3}$ has been performed over a wide range of pressures. The ground state is corundum-type hematite and is an antiferromagnetic insulator. This is in good agreement with experiment and other theoretical studies. On increasing pressure, the ground-state high-spin magnetic phase transforms to low spin via the closure of the charge tran… ▽ More First principles density functional calculations for Fe$_{2}$O$_{3}$ has been performed over a wide range of pressures. The ground state is corundum-type hematite and is an antiferromagnetic insulator. This is in good agreement with experiment and other theoretical studies. On increasing pressure, the ground-state high-spin magnetic phase transforms to low spin via the closure of the charge transfer gap. The system also evolves to a new orthorhombic structure. Distorted corundum or Rh$_{2}$O$_{3}$(II) type structure with Pbcn symmetry and Pbnm type perovskite structure are two known competitive candidates for this structural phase, based on {\it single}--cationic type and {\it two}--cationic type picture, respectively. In our calculations, at about 38 GPa, Rh$_{2}$O$_{3}$(II) type structure becomes more stable with respect to the ground state hematite. Relative stability of Pbnm type perovskite is ruled out by our calculations in this pressure regime. The Rh$_{2}$O$_{3}$(II) type structure remains in its low spin state, with 1 $μ_{B}/$Fe atom, up to about 120 GPa. At this pressure the nonmagnetic solution in Rh$_{2}$O$_{3}$(II) type structure becomes more favorable with respect to the low spin one. By further increasing the pressure at about 330 GPa, the system evolves to yet another new structural phase. This new orthorhombic structural phase is nonmagnetic and has Pmc2$_{1}$ symmetry, a subgroup of Cmcm. Surprisingly, on furthering rising the pressure, a Pbnm type nonmagnetic solution becomes competitive with the Pmc2$_{1}$ type structure and finally becomes stable at about 880 GPa. △ Less

Submitted 12 March, 2009; originally announced March 2009.

Comments: 9 pages, 9 figures

Efficient and accurate calculation of exact exchange and RPA correlation energies in the Adiabatic-Connection Fluctuation-Dissipation theory

Authors: Huy-Viet Nguyen, Stefano de Gironcoli

Abstract: Recently there has been a renewed interest in the calculation of exact-exchange and RPA correlation energies for realistic systems. These quantities are main ingredients of the so-called EXX/RPA+ scheme which has been shown to be a promising alternative approach to the standard LDA/GGA DFT for weakly bound systems where LDA and GGA perform poorly. In this paper, we present an efficient approach… ▽ More Recently there has been a renewed interest in the calculation of exact-exchange and RPA correlation energies for realistic systems. These quantities are main ingredients of the so-called EXX/RPA+ scheme which has been shown to be a promising alternative approach to the standard LDA/GGA DFT for weakly bound systems where LDA and GGA perform poorly. In this paper, we present an efficient approach to compute the RPA correlation energy in the framework of the Adiabatic-Connection Fluctuation-Dissipation formalism. The method is based on the calculation of a relatively small number of eigenmodes of RPA dielectric matrix, efficiently computed by iterative density response calculations in the framework of Density Functional Perturbation Theory. We will also discuss a careful treatment of the integrable divergence in the exact-exchange energy calculation which alleviates the problem of its slow convergence with respect to Brillouin zone sampling. As an illustration of the method, we show the results of applications to bulk Si, Be dimer and atomic systems. △ Less

Submitted 20 April, 2009; v1 submitted 5 February, 2009; originally announced February 2009.

Comments: 12 pages, 6 figures. To appear in Phys. Rev. B

Journal ref: Phys. Rev. B 79, 205114 (2009)

Van der Waals Coefficients of Atoms and Molecules from a Simple Approximation for the Polarizability

Authors: Huy-Viet Nguyen, Stefano de Gironcoli

Abstract: A simple and computationally efficient scheme to calculate approximate imaginary-frequency dependent polarizability, hence asymptotic van der Waals coefficient, within density functional theory is proposed. The dynamical dipolar polarizabilities of atoms and molecules are calculated starting from the Thomas-Fermi-von Weizsäcker (TFvW) approximation for the independent-electron kinetic energy fun… ▽ More A simple and computationally efficient scheme to calculate approximate imaginary-frequency dependent polarizability, hence asymptotic van der Waals coefficient, within density functional theory is proposed. The dynamical dipolar polarizabilities of atoms and molecules are calculated starting from the Thomas-Fermi-von Weizsäcker (TFvW) approximation for the independent-electron kinetic energy functional. The van der Waals coefficients for a number of closed-shell ions and a few molecules are hence calculated and compared with available values obtained by fully first-principles calculations. The success in these test cases shows the potential of the proposed TFvW approximate response function in capturing the essence of long range correlations and may give useful information for constructing a functional which naturally includes van der Waals interactions. △ Less

Submitted 5 February, 2009; originally announced February 2009.

Comments: 6 pages, 4 figures. To appear in Phys. Rev. B

Journal ref: Phys. Rev. B 79, 115105 (2009)

Lowering Effective Coordination Promotes Adsorption of NO on Rh(100) and Rh/MgO(100)surfaces

Authors: Raghani Pushpa, Prasenjit Ghosh, Shobhana Narasimhan, Stefano de Gironcoli

Abstract: We have studied the adsorption of NO, and the coadsorption of N and O, on four physical and hypothetical systems: unstrained and strained Rh(100) surfaces and monolayers of Rh atoms on strained and unstrained MgO(100) surfaces. We find that as we go from Rh(100) to Rh/Mg0(100), via the other two hypothetical systems, the effective coordination progressively decreases, the $d$-band narrows and it… ▽ More We have studied the adsorption of NO, and the coadsorption of N and O, on four physical and hypothetical systems: unstrained and strained Rh(100) surfaces and monolayers of Rh atoms on strained and unstrained MgO(100) surfaces. We find that as we go from Rh(100) to Rh/Mg0(100), via the other two hypothetical systems, the effective coordination progressively decreases, the $d$-band narrows and its center shifts closer to the Fermi level, and the strength of adsorption and co-adsorption increases. Both strain and the presence of the oxide substrate contribute significantly to this. However, charge-transfer is found to play a negligible role, due to a cancelling out between donation and back-donation processes. Our results suggest that lowering effective coordination of Rh catalysts by strain, roughening or the use of inert substrates might improve reaction rates for the reduction of NO to N$_2$. △ Less

Submitted 10 October, 2008; originally announced October 2008.

Comments: 9 pages

Interplay between Bonding and Magnetism in the Adsorption of NO on Rh Clusters

Authors: Prasenjit Ghosh, Raghani Pushpa, Stefano de Gironcoli, Shobhana Narasimhan

Abstract: We have studied the adsorption of NO on small Rh clusters, containing one to five atoms, using density functional theory in both spin-polarized and non-spin-polarized forms. We find that NO bonds more strongly to Rh clusters than it does to Rh(100) or Rh(111); however, it also quenches the magnetism of the clusters. This (local) effect results in reducing the magnitude of the adsorption energy,… ▽ More We have studied the adsorption of NO on small Rh clusters, containing one to five atoms, using density functional theory in both spin-polarized and non-spin-polarized forms. We find that NO bonds more strongly to Rh clusters than it does to Rh(100) or Rh(111); however, it also quenches the magnetism of the clusters. This (local) effect results in reducing the magnitude of the adsorption energy, and also washes out the clear size-dependent trend observed in the non-magnetic case. Our results illustrate the competition present between the tendencies to bond and to magnetize, in small clusters. △ Less

Submitted 27 September, 2007; originally announced September 2007.

Comments: Submitted to J. of Chem. Phys

Origins of low- and high-pressure discontinuities of $T_{c}$ in niobium

Authors: Malgorzata Wierzbowska, Stefano de Gironcoli, Paolo Giannozzi

Abstract: The discontinuities of $T_{c}$ in Niobium under pressure are examined by means of the pseudopotential plane-wave implementation of the electron-phonon coupling calculated from density-functional perturbation theory. Both low- and high-pressure discontinuities of $T_{c}$ have their origin in the Kohn anomalies and are caused by the low-frequency phonons, but the mechanism leading to the discontin… ▽ More The discontinuities of $T_{c}$ in Niobium under pressure are examined by means of the pseudopotential plane-wave implementation of the electron-phonon coupling calculated from density-functional perturbation theory. Both low- and high-pressure discontinuities of $T_{c}$ have their origin in the Kohn anomalies and are caused by the low-frequency phonons, but the mechanism leading to the discontinuities is different in the two cases. The low-pressure anomaly is associated with a global decrease of the nesting factor in the whole Brillouin Zone and not to a visible change in the band structure. The high-pressure anomaly is instead connected with a well-pronounced change in the band structure. △ Less

Submitted 7 February, 2006; v1 submitted 4 April, 2005; originally announced April 2005.

A linear response approach to the calculation of the effective interaction parameters in the LDA+U method

Authors: Matteo Cococcioni, Stefano de Gironcoli

Abstract: In this work we reexamine the LDA+U method of Anisimov and coworkers in the framework of a plane-wave pseudopotential approach. A simplified rotational-invariant formulation is adopted. The calculation of the Hubbard U entering the expression of the functional is discussed and a linear response approach is proposed that is internally consistent with the chosen definition for the occupation matri… ▽ More In this work we reexamine the LDA+U method of Anisimov and coworkers in the framework of a plane-wave pseudopotential approach. A simplified rotational-invariant formulation is adopted. The calculation of the Hubbard U entering the expression of the functional is discussed and a linear response approach is proposed that is internally consistent with the chosen definition for the occupation matrix of the relevant localized orbitals. In this way we obtain a scheme whose functionality should not depend strongly on the particular implementation of the model in ab-initio calculations. We demonstrate the accuracy of the method, computing structural and electronic properties of a few systems including transition and rare-earth correlated metals, transition metal monoxides and iron-silicate. △ Less

Submitted 7 May, 2004; originally announced May 2004.

Comments: 18 pages, 18 figures, 3 tables

Structure and dynamics of oxygen adsorbed on Ag(100) vicinal surfaces

Authors: N. Bonini, A. Kokalj, A. Dal Corso, S. de Gironcoli, S. Baroni

Abstract: The structure and dynamics of atomic oxygen adsorbed on Ag(410) and Ag(210) surfaces have been investigated using density functional theory. Our results show that the adsorption configuration in which O adatoms decorate the upper side of the (110) steps forming O--Ag--O rows is particularly stable for both surfaces. On Ag(210), this arrangement is more stable than other configurations at all the… ▽ More The structure and dynamics of atomic oxygen adsorbed on Ag(410) and Ag(210) surfaces have been investigated using density functional theory. Our results show that the adsorption configuration in which O adatoms decorate the upper side of the (110) steps forming O--Ag--O rows is particularly stable for both surfaces. On Ag(210), this arrangement is more stable than other configurations at all the investigated coverages. On Ag(410), adsorption on the terrace and at the step edge are almost degenerate, the former being slightly preferred at low coverage while the latter is stabilized by increasing the coverage. These findings are substantiated by a comparison between the vibrational modes, calculated within density-functional perturbation theory, and the HREEL spectrum which has been recently measured in these systems. △ Less

Submitted 15 March, 2004; originally announced March 2004.

Comments: 17 pages, 7 tables, 12 figures. To appear in Phys. Rev. B

Electron localization in pure and defective ceria by a unified LDA+U approach

Authors: Stefano Fabris, Stefano de Gironcoli, Stefano Baroni

Abstract: The electronic and structural properties of pure and defective cerium oxide are investigated using a unified LDA+U approach which allows to treat the different valence states of Ce occurring for different stoichiometries on a same ground, without any {\it a priori} assumptions on the defect chemistry. The method correctly predicts the atomistic and electronic structures of the \4ce and \3ce bulk… ▽ More The electronic and structural properties of pure and defective cerium oxide are investigated using a unified LDA+U approach which allows to treat the different valence states of Ce occurring for different stoichiometries on a same ground, without any {\it a priori} assumptions on the defect chemistry. The method correctly predicts the atomistic and electronic structures of the \4ce and \3ce bulk phases, as well as the subtle defect chemistry in reduced materials \xce, which controls the oxygen storage functionality of cerium-based oxides. The analysis of the energetics highlights the limits of the LDA+U method and possible extensions are proposed. △ Less

Submitted 23 December, 2003; originally announced December 2003.

On-surface and Subsurface Adsorption of Oxygen on Stepped Ag(210) and Ag(410) Surfaces

Authors: A. Kokalj, N. Bonini, A. Dal Corso, S. de Gironcoli, S. Baroni

Abstract: The adsorption of atomic oxygen and its inclusion into subsurface sites on Ag(210) and Ag(410) surfaces have been investigated using density functional theory. We find that--in the absence of adatoms on the first metal layer--subsurface adsorption results in strong lattice distortion which makes it energetically unfavoured. However subsurface sites are significantly stabilised when a sufficient… ▽ More The adsorption of atomic oxygen and its inclusion into subsurface sites on Ag(210) and Ag(410) surfaces have been investigated using density functional theory. We find that--in the absence of adatoms on the first metal layer--subsurface adsorption results in strong lattice distortion which makes it energetically unfavoured. However subsurface sites are significantly stabilised when a sufficient amount of O adatoms is present on the surface. At high enough O coverage on the Ag(210) surface the mixed on-surface + subsurface O adsorption is energetically favoured with respect to the on-surface only adsorption. Instead, on the Ag(410) surface, at the coverage we have considered (3/8 ML), the existence of stable terrace sites makes the subsurface O incorporation less favourable. These findings are compatible with the results of recent HREEL experiments which have actually motivated this work. △ Less

Submitted 5 November, 2003; originally announced November 2003.

Comments: 8 pages, 4 figures and 1 table

Electron-phonon interaction at the Be(0001) surface

Authors: A. Eiguren, S. de Gironcoli, E. V. Chulkov, P. M. Echenique, E. Tosatti

Abstract: We present a first principle study of the electron-phonon (e-p) interaction at the Be(0001) surface. The real and imaginary part of the e-p self energy are calculated for the surface state in the binding energy range from the $\barΓ$ point to the Fermi level. Our calculation shows an overall good agreement with several photoemission data measured at high and low temperatures. Additionally, we sh… ▽ More We present a first principle study of the electron-phonon (e-p) interaction at the Be(0001) surface. The real and imaginary part of the e-p self energy are calculated for the surface state in the binding energy range from the $\barΓ$ point to the Fermi level. Our calculation shows an overall good agreement with several photoemission data measured at high and low temperatures. Additionally, we show that the energy derivative of real part of the self-energy presents a strong temperature and energy variation close to $E_{F}$, making it difficult to measure its value just at $E_{F}$. △ Less

Submitted 3 October, 2003; originally announced October 2003.

Comments: Accepted in Phys. Rev. Lett., 5 figures

Disproportionation Phenomena on Free and Strained Sn/Ge(111) and Sn/Si(111) Surfaces

Authors: G. Ballabio, G. Profeta, S. de Gironcoli, S. Scandolo, G. E. Santoro, E. Tosatti

Abstract: Distortions of the $\sqrt3\times\sqrt3$ Sn/Ge(111) and Sn/Si(111) surfaces are shown to reflect a disproportionation of an integer pseudocharge, $Q$, related to the surface band occupancy. A novel understanding of the $(3\times3)$-1U (``1 up, 2 down'') and 2U (``2 up, 1 down'') distortions of Sn/Ge(111) is obtained by a theoretical study of the phase diagram under strain. Positive strain keeps t… ▽ More Distortions of the $\sqrt3\times\sqrt3$ Sn/Ge(111) and Sn/Si(111) surfaces are shown to reflect a disproportionation of an integer pseudocharge, $Q$, related to the surface band occupancy. A novel understanding of the $(3\times3)$-1U (``1 up, 2 down'') and 2U (``2 up, 1 down'') distortions of Sn/Ge(111) is obtained by a theoretical study of the phase diagram under strain. Positive strain keeps the unstrained value Q=3 but removes distorsions. Negative strain attracts pseudocharge from the valence band causing first a $(3\times3)$-2U distortion (Q=4) on both Sn/Ge and Sn/Si, and eventually a $(\sqrt3\times\sqrt3)$-3U (``all up'') state with Q=6. The possibility of a fluctuating phase in unstrained Sn/Si(111) is discussed. △ Less

Submitted 9 July, 2002; originally announced July 2002.

Comments: Revtex, 5 pages, 3 figures

Ab initio calculation of the thermal properties of Cu: Performance of the LDA and GGA

Authors: Shobhana Narasimhan, Stefano de Gironcoli

Abstract: The thermal properties of bulk copper are investigated by performing ab initio DFT and DFPT calculations and using the quasiharmonic approximation for the free energy. Using both the LDA and the GGA for the exchange-correlation potential, we compute the temperature dependence of the lattice constant, coefficient of thermal expansion, bulk modulus, pressure derivative of the bulk modulus, phonon… ▽ More The thermal properties of bulk copper are investigated by performing ab initio DFT and DFPT calculations and using the quasiharmonic approximation for the free energy. Using both the LDA and the GGA for the exchange-correlation potential, we compute the temperature dependence of the lattice constant, coefficient of thermal expansion, bulk modulus, pressure derivative of the bulk modulus, phonon frequencies, Grueneisen parameters, and the electronic and phonon contributions to the specific heats at constant volume and constant pressure. We obtain answers in closer agreement with experiment than those obtained from more approximate earlier treatments. The LDA/GGA errors in computing anharmonic quantities are significantly smaller than those in harmonic quantities. We argue that this should be a general feature, and also argue that LDA/GGA errors should increase with temperature. △ Less

Submitted 3 September, 2001; originally announced September 2001.

Comments: In Revtex format, includes 8 postscript figures

Role of defects in the electronic properties of amorphous/crystalline Si interface

Authors: Maria Peressi, Luciano Colombo, Stefano de Gironcoli

Abstract: The mechanism determining the band alignment of the amorphous/crystalline Si heterostructures is addressed with direct atomistic simulations of the interface performed using a hierarchical combination of various computational schemes ranging from classical model-potential molecular dynamics to ab-initio methods. We found that in coordination defect-free samples the band alignment is almost vani… ▽ More The mechanism determining the band alignment of the amorphous/crystalline Si heterostructures is addressed with direct atomistic simulations of the interface performed using a hierarchical combination of various computational schemes ranging from classical model-potential molecular dynamics to ab-initio methods. We found that in coordination defect-free samples the band alignment is almost vanishing and independent on interface details. In defect-rich samples, instead, the band alignment is sizeably different with respect to the defect-free case, but, remarkably, almost independent on the concentration of defects. We rationalize these findings within the theory of semiconductor interfaces. △ Less

Submitted 14 May, 2001; v1 submitted 22 February, 2001; originally announced February 2001.

Comments: 4 pages in two-column format, 2 postscript figures included

Phonons and related properties of extended systems from density-functional perturbation theory

Authors: S. Baroni, S. de Gironcoli, A. Dal Corso, P. Giannozzi

Abstract: This article reviews the current status of lattice-dynamical calculations in crystals, using density-functional perturbation theory, with emphasis on the plane-wave pseudo-potential method. Several specialized topics are treated, including the implementation for metals, the calculation of the response to macroscopic electric fields and their relevance to long wave-length vibrations in polar mate… ▽ More This article reviews the current status of lattice-dynamical calculations in crystals, using density-functional perturbation theory, with emphasis on the plane-wave pseudo-potential method. Several specialized topics are treated, including the implementation for metals, the calculation of the response to macroscopic electric fields and their relevance to long wave-length vibrations in polar materials, the response to strain deformations, and higher-order responses. The success of this methodology is demonstrated with a number of applications existing in the literature. △ Less

Submitted 6 December, 2000; originally announced December 2000.

Comments: 52 pages, 14 figures, submitted to Review of Modern Physics

Journal ref: Rev. Mod. Phys. 73, 515-562 (2001)

The mechanism for the 3 x 3 distortion of Sn/ge (111)

Authors: S. de Gironcoli, S. Scandolo, G. Ballabio, G. Santoro, E. Tosatti

Abstract: We show that two distinct $3 \times 3$ ground states, one nonmagnetic, metallic, and distorted, the other magnetic, semimetallic (or insulating) and undistorted, compete in $α$-phase adsorbates on semiconductor (111) surfaces. In Sn/Ge(111), LSDA/GGA calculations indicate, in agreement with experiment, that the distorted metallic ground state prevails. The reason for stability of this state is a… ▽ More We show that two distinct $3 \times 3$ ground states, one nonmagnetic, metallic, and distorted, the other magnetic, semimetallic (or insulating) and undistorted, compete in $α$-phase adsorbates on semiconductor (111) surfaces. In Sn/Ge(111), LSDA/GGA calculations indicate, in agreement with experiment, that the distorted metallic ground state prevails. The reason for stability of this state is analysed, and is traced to a sort of bond density wave, specifically a modulation of the antibonding state filling between the adatom and a Ge-Ge bond directly underneath. △ Less

Submitted 20 December, 1999; originally announced December 1999.

Dipole-quadrupole interactions and the nature of phase III of compressed hydrogen

Authors: Jorge Kohanoff, Sandro Scandolo, Stefano de Gironcoli, Erio Tosatti

Abstract: A new class of strongly infrared active structures is identified for phase III of compressed molecular H2 by constant-pressure ab initio molecular dynamics and density-functional perturbation calculations. These are planar quadrupolar structures obtained as a distortion of low-pressure quadrupolar phases, after they become unstable at about 150 GPa due to a zone-boundary soft phonon. The nature… ▽ More A new class of strongly infrared active structures is identified for phase III of compressed molecular H2 by constant-pressure ab initio molecular dynamics and density-functional perturbation calculations. These are planar quadrupolar structures obtained as a distortion of low-pressure quadrupolar phases, after they become unstable at about 150 GPa due to a zone-boundary soft phonon. The nature of the II-III transition and the origin of the IR activity are rationalized by means of simple electrostatics, as the onset of a stabilizing dipole-quadrupole interaction. △ Less

Submitted 27 September, 1999; originally announced September 1999.

Comments: 4 pages, 3 figures. To appear in Phys. Rev. Lett

Floating bonds and gap states in a-Si and a-Si:H from first principles calculations

Authors: M. Fornari, M. Peressi, S. de Gironcoli, A. Baldereschi

Abstract: We study in detail by means of ab-initio pseudopotential calculations the electronic structure of five-fold coordinated (T_5) defects in a-Si and a-Si:H, also during their formation and their evolution upon hydrogenation. The atom-projected densities of states (DOS) and an accurate analysis of the valence charge distribution clearly indicate the fundamental contribution of T_5 defects in origina… ▽ More We study in detail by means of ab-initio pseudopotential calculations the electronic structure of five-fold coordinated (T_5) defects in a-Si and a-Si:H, also during their formation and their evolution upon hydrogenation. The atom-projected densities of states (DOS) and an accurate analysis of the valence charge distribution clearly indicate the fundamental contribution of T_5 defects in originating gap states through their nearest neighbors. The interaction with hydrogen can reduce the DOS in the gap annihilating T_5 defects. △ Less

Submitted 15 June, 1999; originally announced June 1999.

Comments: To appear in Europhysics Lett

Coordination defects in a-Si and a-Si:H : a characterization from first principles calculations

Authors: M. Peressi, M. Fornari, S. de Gironcoli, L. De Santis, A. Baldereschi

Abstract: We study by means of first-principles pseudopotential method the coordination defects in a-Si and a-Si:H, also in their formation and their evolution upon hydrogen interaction. An accurate analysis of the valence charge distribution and of the ``electron localization function'' (ELF) allows to resolve possible ambiguities in the bonding configuration, and in particular to identify clearly three-… ▽ More We study by means of first-principles pseudopotential method the coordination defects in a-Si and a-Si:H, also in their formation and their evolution upon hydrogen interaction. An accurate analysis of the valence charge distribution and of the ``electron localization function'' (ELF) allows to resolve possible ambiguities in the bonding configuration, and in particular to identify clearly three-fold (T_3) and five-fold (T_5) coordinated defects. We found that electronic states in the gap can be associated to both kind of defects, and that in both cases the interaction with hydrogen can reduce the density of states in the gap. △ Less

Submitted 8 June, 1999; originally announced June 1999.

Comments: To appear in Philos. Mag

The reconstruction of Ni and Rh (001) surfaces upon Carbon, Nitrogen, or Oxygen adsorption

Authors: Dario Alfe`, Stefano de Gironcoli, Stefano Baroni

Abstract: Nickel and Rhodium (001) surfaces display a similar - as from STM images - clock reconstruction when half a monolayer of C/Ni, N/Ni or O/Rh is adsorbed; no reconstruction is observed instead for O/Ni. Adsorbate atoms sit at the center of the black squares of a chess-board, $c(2\times 2)$, pattern and two different reconstructions are actually compatible with the observed STM images - showing a… ▽ More Nickel and Rhodium (001) surfaces display a similar - as from STM images - clock reconstruction when half a monolayer of C/Ni, N/Ni or O/Rh is adsorbed; no reconstruction is observed instead for O/Ni. Adsorbate atoms sit at the center of the black squares of a chess-board, $c(2\times 2)$, pattern and two different reconstructions are actually compatible with the observed STM images - showing a $(2\times 2)p4g$ pattern - according to whether a rotation of the black or white squares occurs. We report on a first - principles study of the structure of X/Ni(001) and X/Rh(001) surfaces (X=C,N,O) at half a monolayer coverage, performed using density-functional theory. Our findings are in agreement with all available experimental information and shed new light on the mechanisms responsible for the reconstructions. We show that the same substrate may display different reconstructions - or no reconstruction - upon adsorption of different atomic species, depending on the relative importance of the chemical and steric factors which determine the reconstruction. △ Less

Submitted 2 December, 1998; originally announced December 1998.

Comments: 18 pages, 5 figures

Effects of disorder on the optical properties of the (Zn,Mg)(S,Se) quaternary alloy

Authors: Antonino Marco Saitta, Stefano de Gironcoli, Stefano Baroni

Abstract: The electronic and optical properties of (Zn,Mg)(S,Se) wide-gap solid solutions are studied using ab initio techniques and starting from the previously determined atomistic structure of the alloy. Compositional disorder is shown to close substantially the gap with respect to the predictions of the virtual-crystal approximation. The bowing of the fundamental gap vs. composition predicted by our c… ▽ More The electronic and optical properties of (Zn,Mg)(S,Se) wide-gap solid solutions are studied using ab initio techniques and starting from the previously determined atomistic structure of the alloy. Compositional disorder is shown to close substantially the gap with respect to the predictions of the virtual-crystal approximation. The bowing of the fundamental gap vs. composition predicted by our calculations is in very good agreement with experiments available for the Zn(S,Se) pseudo-binary alloy. At temperatures typical for MBE growth, the quaternary alloy displays a rather large amount of short-range order whose effect is to slightly but unmistakably open the gap. Our results agree well with recent experimental data for the quaternary alloy. △ Less

Submitted 20 November, 1998; originally announced November 1998.

Comments: 4 pages, 2 figures, gzipped postscript

First-principles calculation of the thermal properties of silver

Authors: Jianjun Xie, Stefano de Gironcoli, Stefano Baroni, Matthias Scheffler

Abstract: The thermal properties of silver are calculated within the quasi-harmonic approximation, by using phonon dispersions from density-functional perturbation theory, and the pseudopotential plane-wave method. The resulting free energy provides predictions for the temperature dependence of various quantities such as the equilibrium lattice parameter, the bulk modulus, and the heat capacity. Our resul… ▽ More The thermal properties of silver are calculated within the quasi-harmonic approximation, by using phonon dispersions from density-functional perturbation theory, and the pseudopotential plane-wave method. The resulting free energy provides predictions for the temperature dependence of various quantities such as the equilibrium lattice parameter, the bulk modulus, and the heat capacity. Our results for the thermal properties are in good agreement with available experimental data in a wide range of temperatures. As a by-product, we calculate phonon frequency and Grueneisen parameter dispersion curves which are also in good agreement with experiment. △ Less

Submitted 24 July, 1998; originally announced July 1998.

Comments: 9 pages, 8 figures, submitted to Phys. Rev. B April 30, 1998). Other related publications can be found at http://www.rz-berlin.mpg.de/th/paper.html

Temperature dependent surface relaxations of Ag(111)

Authors: Jianjun Xie, Stefano de Gironcoli, Stefano Baroni, Matthias Scheffler

Abstract: The temperature dependent surface relaxation of Ag(111) is calculated by density-functional theory. At a given temperature, the equilibrium geometry is determined by minimizing the Helmholtz free energy within the quasiharmonic approximation. To this end, phonon dispersions all over the Brillouin zone are determined from density-functional perturbation theory. We find that the top-layer relaxati… ▽ More The temperature dependent surface relaxation of Ag(111) is calculated by density-functional theory. At a given temperature, the equilibrium geometry is determined by minimizing the Helmholtz free energy within the quasiharmonic approximation. To this end, phonon dispersions all over the Brillouin zone are determined from density-functional perturbation theory. We find that the top-layer relaxation of Ag(111) changes from an inward contraction (-0.8 %) to an outward expansion (+6.3%) as the temperature increases from T=0 K to 1150 K, in agreement with experimental findings. Also the calculated surface phonon dispersion curves at room temperature are in good agreement with helium scattering measurements. The mechanism driving this surface expansion is analyzed. △ Less

Submitted 14 July, 1998; originally announced July 1998.

Comments: 6 pages, 7 figures, submitted to Phys. Rev. B (May 1998). Other related publications can be found at http://www.rz-berlin.mpg.de/th/paper.html

The reconstruction of Rh(001) upon oxygen adsorption

Authors: Dario Alfe`, Stefano de Gironcoli, Stefano Baroni

Abstract: We report on a first-principles study of the structure of O/Rh(001) at half a monolayer of oxygen coverage, performed using density-functional theory. We find that oxygen atoms sit at the center of the black squares of a chess-board, $c(2\times 2)$, pattern. This structure is unstable against a rhomboid distortion of the black squares, which shortens the distance between an O atom and two of the… ▽ More We report on a first-principles study of the structure of O/Rh(001) at half a monolayer of oxygen coverage, performed using density-functional theory. We find that oxygen atoms sit at the center of the black squares of a chess-board, $c(2\times 2)$, pattern. This structure is unstable against a rhomboid distortion of the black squares, which shortens the distance between an O atom and two of the four neighboring Rh atoms, while lengthening the distance with respect to the other two. We actually find that the surface energy is further lowered by allowing the O atom to get off the short diagonal of the rhombus so formed. We predict that the latter distortion is associated with an order-disorder transition, occurring below room temperature. The above rhomboid distortion of the square lattice may be seen as a rotation of the empty, white, squares. Our findings are at variance with recent claims based on STM images, according to which it is instead the black squares which would rotate. We argue that these images are indeed compatible with our predicted reconstruction pattern. △ Less

Submitted 3 April, 1998; originally announced April 1998.

Comments: 14 pages (inclusive of 5 figures). To appear on Surface Science

Structural and Electronic Properties of a Wide-gap Semiconductor Alloy: Zn_xMg_{1-x}S_ySe_{1-y}

Authors: Antonino Marco Saitta, Stefano de Gironcoli, Stefano Baroni

Abstract: The structural properties of the $Zn_xMg_{1-xS_ySe_{1-y}}$ solid solutions are determined by a combination of the computational alchemy and the cluster expansion methods with Monte Carlo simulations. We determine the phase diagram of the alloy and show that the homogeneous phase is characterized by a large amount of short-range order occurring among first-nearest neighbors. Electronic-structure… ▽ More The structural properties of the $Zn_xMg_{1-xS_ySe_{1-y}}$ solid solutions are determined by a combination of the computational alchemy and the cluster expansion methods with Monte Carlo simulations. We determine the phase diagram of the alloy and show that the homogeneous phase is characterized by a large amount of short-range order occurring among first-nearest neighbors. Electronic-structure calculations performed using the special quasi-random structures approach indicate that the energy gap of the alloy is rather sensitive to this short-range order. △ Less

Submitted 10 December, 1997; originally announced December 1997.

Comments: 5 pages, 4 postscript figures

Phonon Softening and Elastic Instabilities in the Cubic-to-Orthorhombic Structural Transition of CsH

Authors: A. M. Saitta, D. Alfe`, S. de Gironcoli, S. Baroni

Abstract: The cubic-to-orthorhombic structural transition occurring in CsH at a pressure of about 17 GPa is studied by ab initio calculations. The relative stability of the competing structures and the transition pressure are correctly predicted. We show that this pressure-induced first-order transition is intimately related to a displacive second-order transition which would occur upon application of a s… ▽ More The cubic-to-orthorhombic structural transition occurring in CsH at a pressure of about 17 GPa is studied by ab initio calculations. The relative stability of the competing structures and the transition pressure are correctly predicted. We show that this pressure-induced first-order transition is intimately related to a displacive second-order transition which would occur upon application of a shear strain to the (110) planes. The resulting instability is rationalized in terms of the pressure-induced modifications of the electronic structure. △ Less

Submitted 19 December, 1996; v1 submitted 21 October, 1996; originally announced October 1996.

Comments: 5 pages, latex file, 5 figures

Phonon softening and superconductivity in tellurium under pressure

Authors: Francesco Mauri, Oleg Zakharov, Stefano de Gironcoli, Steven G. Louie, Marvin L. Cohen

Abstract: The phonon dispersion and the electron-phonon interaction for the $β$-Po and the bcc high pressure phases of tellurium are computed with density-functional perturbation theory. Our calculations reproduce and explain the experimentally observed pressure dependence of the superconducting critical temperature (T$_{\rm c}$) and confirm the connection between the jump in T$_{\rm c}$ and the structura… ▽ More The phonon dispersion and the electron-phonon interaction for the $β$-Po and the bcc high pressure phases of tellurium are computed with density-functional perturbation theory. Our calculations reproduce and explain the experimentally observed pressure dependence of the superconducting critical temperature (T$_{\rm c}$) and confirm the connection between the jump in T$_{\rm c}$ and the structural phase transition. The phonon contribution to the free energy is shown to be responsible for the difference in the structural transition pressure observed in low and room temperature experiments. △ Less

Submitted 25 June, 1996; originally announced June 1996.

Comments: Revtex, 4 Postscript figures, to appear in Phys. Rev. Lett