Showing 1–25 of 25 results for author: de Geus, T W J

Dynamical heterogeneities of thermal creep in pinned interfaces

Authors: Tom W. J. de Geus, Alberto Rosso, Matthieu Wyart

Abstract: Disordered systems under applied loading display slow creep flows at finite temperature, which can lead to the material rupture. Renormalization group arguments predicted that creep proceeds via thermal avalanches of activated events. Recently, thermal avalanches were argued to control the dynamics of liquids near their glass transition. Both theoretical approaches are markedly different. Here we… ▽ More Disordered systems under applied loading display slow creep flows at finite temperature, which can lead to the material rupture. Renormalization group arguments predicted that creep proceeds via thermal avalanches of activated events. Recently, thermal avalanches were argued to control the dynamics of liquids near their glass transition. Both theoretical approaches are markedly different. Here we provide a scaling description that seeks to unify dynamical heterogeneities in both phenomena, confirm it in simple models of pinned elastic interfaces, and discuss its experimental implications. △ Less

Submitted 18 January, 2024; originally announced January 2024.

Armouring of a frictional interface by mechanical noise

Authors: Elisa El Sergany, Matthieu Wyart, Tom W. J. de Geus

Abstract: A dry frictional interface loaded in shear often displays stick-slip. The amplitude of this cycle depends on the probability that a slip event nucleates into a rupture, and on the rate at which slip events are triggered. This rate is determined by the distribution $P(x)$ of soft spots which yields if the shear stress is increased by some amount $x$. In minimal models of a frictional interface that… ▽ More A dry frictional interface loaded in shear often displays stick-slip. The amplitude of this cycle depends on the probability that a slip event nucleates into a rupture, and on the rate at which slip events are triggered. This rate is determined by the distribution $P(x)$ of soft spots which yields if the shear stress is increased by some amount $x$. In minimal models of a frictional interface that include disorder, inertia and long-range elasticity, we discovered an 'armouring' mechanism, by which the interface is greatly stabilised after a large slip event: $P(x)$ then vanishes at small arguments, as $P(x)\sim x^θ$ [1]. The exponent $θ>0$, which exists only in the presence of inertia (otherwise $θ=0$), was found to depend on the statistics of the disorder in the model, a phenomenon that was not explained. Here, we show that a single-particle toy model with inertia and disorder captures the existence of a non-trivial exponent $θ>0$, which we can analytically relate to the statistics of the disorder. △ Less

Submitted 31 January, 2023; originally announced January 2023.

Stick-slip in a stack: how slip dissonance reveals aging

Authors: Samuel Poincloux, Pedro M. Reis, Tom W. J. de Geus

Abstract: We perform physical and numerical experiments to study the stick-slip response of a stack of slabs in contact through dry frictional interfaces driven in quasistatic shear. The ratio between the drive's stiffness and the slab's shear stiffness controls the presence or absence of slip synchronization. A sufficiently high stiffness ratio leads to synchronization, comprising periodic slip events in w… ▽ More We perform physical and numerical experiments to study the stick-slip response of a stack of slabs in contact through dry frictional interfaces driven in quasistatic shear. The ratio between the drive's stiffness and the slab's shear stiffness controls the presence or absence of slip synchronization. A sufficiently high stiffness ratio leads to synchronization, comprising periodic slip events in which all interfaces slip simultaneously. A lower stiffness ratio leads to asynchronous slips and, experimentally, to the stick-slip amplitude becoming broadly distributed as the number of layers in the stack increases. We interpret this broadening in light of the combined effect of complex loading paths due to the asynchronous slips and creep. Consequently, the aging rate of the interfaces can be readily extracted from the stick-slip cycles, and it is found to be of the same order of magnitude as existing experimental results on a similar material. Finally, we discuss the emergence of slow slips and an increase in aging-rate variations when more slabs are added to the stack. △ Less

Submitted 5 February, 2024; v1 submitted 31 January, 2023; originally announced January 2023.

Journal ref: Physical Review Research (2024), 6(1):013080

Scaling theory for the statistics of slip at frictional interfaces

Authors: Tom W. J. de Geus, Matthieu Wyart

Abstract: Slip at a frictional interface occurs via intermittent events. Understanding how these events are nucleated, can propagate, or stop spontaneously remains a challenge, central to earthquake science and tribology. In the absence of disorder, rate-and-state approaches predict a diverging nucleation length at some stress $σ^*$, beyond which cracks can propagate. Here we argue for a flat interface that… ▽ More Slip at a frictional interface occurs via intermittent events. Understanding how these events are nucleated, can propagate, or stop spontaneously remains a challenge, central to earthquake science and tribology. In the absence of disorder, rate-and-state approaches predict a diverging nucleation length at some stress $σ^*$, beyond which cracks can propagate. Here we argue for a flat interface that disorder is a relevant perturbation to this description. We justify why the distribution of slip contains two parts: a powerlaw corresponding to `avalanches', and a `narrow' distribution of system-spanning `fracture' events. We derive novel scaling relations for avalanches, including a relation between the stress drop and the spatial extension of a slip event. We compute the cut-off length beyond which avalanches cannot be stopped by disorder, leading to a system-spanning fracture, and successfully test these predictions in a minimal model of frictional interfaces. △ Less

Submitted 8 October, 2022; v1 submitted 6 April, 2022; originally announced April 2022.

Scaling description of creep flow in amorphous solids

Authors: Marko Popović, Tom W. J. de Geus, Wencheng Ji, Alberto Rosso, Matthieu Wyart

Abstract: Amorphous solids such as coffee foam, toothpaste or mayonnaise display a transient creep flow when a stress $Σ$ is suddenly imposed. The associated strain rate is commonly found to decay in time as $\dotγ \sim t^{-ν}$, followed either by arrest or by a sudden fluidisation. Various empirical laws have been suggested for the creep exponent $ν$ and fluidisation time $τ_f$ in experimental and numerica… ▽ More Amorphous solids such as coffee foam, toothpaste or mayonnaise display a transient creep flow when a stress $Σ$ is suddenly imposed. The associated strain rate is commonly found to decay in time as $\dotγ \sim t^{-ν}$, followed either by arrest or by a sudden fluidisation. Various empirical laws have been suggested for the creep exponent $ν$ and fluidisation time $τ_f$ in experimental and numerical studies. Here, we postulate that plastic flow is governed by the difference between $Σ$ and the transient yield stress $Σ_t(γ)$ that characterises the stability of configurations visited by the system at strain $γ$. Assuming the analyticity of $Σ_t(γ)$ allows us to predict $ν$ and asymptotic behaviours of $τ_f$ in terms of properties of stationary flows. We test successfully our predictions using elastoplastic models and published experimental results. △ Less

Submitted 6 October, 2022; v1 submitted 7 November, 2021; originally announced November 2021.

Mean-field description for the architecture of low-energy excitations in glasses

Authors: Wencheng Ji, Tom W. J. de Geus, Elisabeth Agoritsas, Matthieu Wyart

Abstract: In amorphous materials, groups of particles can rearrange locally into a new stable configuration. Such elementary excitations are key as they determine the response to external stresses, as well as to thermal and quantum fluctuations. Yet, understanding what controls their geometry remains a challenge. Here we build a scaling description of the geometry and energy of low-energy excitations in ter… ▽ More In amorphous materials, groups of particles can rearrange locally into a new stable configuration. Such elementary excitations are key as they determine the response to external stresses, as well as to thermal and quantum fluctuations. Yet, understanding what controls their geometry remains a challenge. Here we build a scaling description of the geometry and energy of low-energy excitations in terms of the distance to an instability, as predicted for instance at the dynamical transition in mean field approaches of supercooled liquids. We successfully test our predictions in ultrastable computer glasses, with a gapped and ungapped (regular) spectrum. Overall, our approach explains why excitations become less extended, with a higher energy and displacement scale upon cooling. △ Less

Submitted 24 April, 2022; v1 submitted 24 June, 2021; originally announced June 2021.

Journal ref: Physical Review E, 2022, 105(4):044601

Thermally activated flow in models of amorphous solids

Authors: Marko Popović, Tom W. J. de Geus, Wencheng Ji, Matthieu Wyart

Abstract: Amorphous solids yield at a critical value $Σ_c$ of the imposed stress $Σ$ through a dynamical phase transition. While sharp in athermal systems, the presence of thermal fluctuations leads to the rounding of the transition and thermally activated flow even below $Σ_c$. Here, we study the steady state thermal flow of amorphous solids using a mesoscopic elasto-plastic model. In the Hebraud-Lequex (H… ▽ More Amorphous solids yield at a critical value $Σ_c$ of the imposed stress $Σ$ through a dynamical phase transition. While sharp in athermal systems, the presence of thermal fluctuations leads to the rounding of the transition and thermally activated flow even below $Σ_c$. Here, we study the steady state thermal flow of amorphous solids using a mesoscopic elasto-plastic model. In the Hebraud-Lequex (HL) model we provide an analytical solution of the thermally activated flow at low temperature. We then propose a general scaling law that also describes the transition rounding. Finally, we find that the scaling law holds in numerical simulations of the HL model, a 2D elasto-plastic model, and in previously published molecular dynamics simulations of 2D Lennard-Jones glass. △ Less

Submitted 22 September, 2020; v1 submitted 10 September, 2020; originally announced September 2020.

Journal ref: Phys. Rev. E 104, 025010 (2021)

Improving the initial guess for the Newton-Raphson protocol in time-dependent simulations

Authors: Jasper Volmer, Tom W. J. de Geus, Ron H. J. Peerlings

Abstract: A general linearisation procedure for the consistent tangent of a small-strain visco-plastic material model is presented in this note. The procedure is based on multi-variable linearisation around a so-called 'reference state'. In particular, the linerarisation of the time integration scheme is found to yield an extra term compared to classical expressions, which only appears because the material… ▽ More A general linearisation procedure for the consistent tangent of a small-strain visco-plastic material model is presented in this note. The procedure is based on multi-variable linearisation around a so-called 'reference state'. In particular, the linerarisation of the time integration scheme is found to yield an extra term compared to classical expressions, which only appears because the material response is time-dependent. It has the effect of yielding a very accurate initial guess for the Newton-Raphson protocol based on the ongoing viscous flow. It is shown, using a modern variational FFT-based solver, that the extra term reduces both the CPU time and the number of Newton-Raphson iterations by around a factor two. △ Less

Submitted 22 July, 2020; v1 submitted 14 December, 2019; originally announced December 2019.

Comments: Journal of Computational Physics, 2020

Thermal origin of quasi-localised excitations in glasses

Authors: Wencheng Ji, Tom W. J. de Geus, Marko Popović, Elisabeth Agoritsas, Matthieu Wyart

Abstract: Key aspects of glasses are controlled by the presence of excitations in which a group of particles can rearrange. Surprisingly, recent observations indicate that their density is dramatically reduced and their size decreases as the temperature of the supercooled liquid is lowered. Some theories predict these excitations to cause a gap in the spectrum of quasi-localised modes of the Hessian that gr… ▽ More Key aspects of glasses are controlled by the presence of excitations in which a group of particles can rearrange. Surprisingly, recent observations indicate that their density is dramatically reduced and their size decreases as the temperature of the supercooled liquid is lowered. Some theories predict these excitations to cause a gap in the spectrum of quasi-localised modes of the Hessian that grows upon cooling, while others predict a pseudo-gap ${D_L(ω)} \sim ω^α$. To unify these views and observations, we generate glassy configurations of controlled gap magnitude $ω_c$ at temperature ${T=0}$, using so-called `breathing' particles, and study how such gapped states respond to thermal fluctuations. We find that \textit{(i)}~the gap always fills up at finite $T$ with ${D_L(ω) \approx A_4(T) \, ω^4}$ and ${A_4 \sim \exp(-E_a / T)}$ at low $T$, \textit{(ii)}~$E_a$ rapidly grows with $ω_c$, in reasonable agreement with a simple scaling prediction ${E_a\sim ω_c^4}$ and \textit{(iii)}~at larger $ω_c$ excitations involve fewer particles, as we rationalise, and eventually become string-like. We propose an interpretation of mean-field theories of the glass transition, in which the modes beyond the gap act as an excitation reservoir, from which a pseudo-gap distribution is populated with its magnitude rapidly decreasing at lower $T$. We discuss how this picture unifies the rarefaction as well as the decreasing size of excitations upon cooling, together with a string-like relaxation occurring near the glass transition. △ Less

Submitted 20 December, 2020; v1 submitted 22 December, 2019; originally announced December 2019.

Journal ref: Phys. Rev. E 102, 062110 (2020)

How collective asperity detachments nucleate slip at frictional interfaces

Authors: Tom W. J. de Geus, Marko Popović, Wencheng Ji, Alberto Rosso, Matthieu Wyart

Abstract: Sliding at a quasi-statically loaded frictional interface can occur via macroscopic slip events, which nucleate locally before propagating as rupture fronts very similar to fracture. We introduce a novel microscopic model of a frictional interface that includes asperity-level disorder, elastic interaction between local slip events, and inertia. For a perfectly flat and homogeneously loaded interfa… ▽ More Sliding at a quasi-statically loaded frictional interface can occur via macroscopic slip events, which nucleate locally before propagating as rupture fronts very similar to fracture. We introduce a novel microscopic model of a frictional interface that includes asperity-level disorder, elastic interaction between local slip events, and inertia. For a perfectly flat and homogeneously loaded interface, we find that slip is nucleated by avalanches of asperity detachments of extension larger than a critical radius $A_c$ governed by a Griffith criterion. We find that after slip, the density of asperities at a local distance to yielding $x_σ$ presents a pseudo-gap $P(x_σ) \sim (x_σ)^θ$, where $θ$ is a non-universal exponent that depends on the statistics of the disorder. This result makes a link between friction and the plasticity of amorphous materials where a pseudo-gap is also present. For friction, we find that a consequence is that stick-slip is an extremely slowly decaying finite size effect, while the slip nucleation radius $A_c$ diverges as a $θ$-dependent power law of the system size. We discuss how these predictions can be tested experimentally. △ Less

Submitted 20 December, 2019; v1 submitted 16 April, 2019; originally announced April 2019.

Journal ref: Proc. Natl. Acad. Sci. U.S.A., 2019, 116(48):23977-23983

Theory for the density of interacting quasi-localised modes in amorphous solids

Authors: Wencheng Ji, Marko Popović, Tom W. J. de Geus, Edan Lerner, Matthieu Wyart

Abstract: Quasi-localised modes appear in the vibrational spectrum of amorphous solids at low-frequency. Though never formalised, these modes are believed to have a close relationship with other important local excitations, including shear transformations and two-level systems. We provide a theory for their frequency density, $D_{L}(ω)\simω^α$, that establishes this link for systems at zero temperature unde… ▽ More Quasi-localised modes appear in the vibrational spectrum of amorphous solids at low-frequency. Though never formalised, these modes are believed to have a close relationship with other important local excitations, including shear transformations and two-level systems. We provide a theory for their frequency density, $D_{L}(ω)\simω^α$, that establishes this link for systems at zero temperature under quasi-static loading. It predicts two regimes depending on the density of shear transformations $P(x)\sim x^θ$ (with $x$ the additional stress needed to trigger a shear transformation). If $θ>1/4$, $α=4$ and a finite fraction of quasi-localised modes form shear transformations, whose amplitudes vanish at low frequencies. If $θ<1/4$, $α=3+ 4 θ$ and all quasi-localised modes form shear transformations with a finite amplitude at vanishing frequencies. We confirm our predictions numerically. △ Less

Submitted 4 March, 2019; v1 submitted 5 June, 2018; originally announced June 2018.

Journal ref: Phys. Rev. E 99, 023003 (2019)

Elasto-plastic description of brittle failure in amorphous materials

Authors: Marko Popović, Tom W. J. de Geus, Matthieu Wyart

Abstract: The response of amorphous materials to an applied strain can be continuous, or instead display a macroscopic stress drop when a shear band nucleates. Such discontinuous response can be observed if the initial configuration is very stable. We study theoretically how such brittleness emerges in athermal, quasi-statically driven, materials as their initial stability is increased. We show that this em… ▽ More The response of amorphous materials to an applied strain can be continuous, or instead display a macroscopic stress drop when a shear band nucleates. Such discontinuous response can be observed if the initial configuration is very stable. We study theoretically how such brittleness emerges in athermal, quasi-statically driven, materials as their initial stability is increased. We show that this emergence is well reproduced by elasto-plastic models and is predicted by a mean field approximation, where it corresponds to a continuous transition. In mean field, failure can be forecasted from the avalanche statistics. We show that this is not the case for very brittle materials in finite dimensions due to rare weak regions where a shear band nucleates. Their critical radius is predicted to follow $a_c\sim (Σ-Σ_b)^{-2}$, where $Σ$ is the stress and $Σ_b$ the stress a shear band can carry. △ Less

Submitted 30 March, 2018; originally announced March 2018.

Journal ref: Phys. Rev. E 98, 040901 (2018)

Energy-based comparison between the Fourier--Galerkin method and the finite element method

Authors: Jaroslav Vondřejc, Tom W. J. de Geus

Abstract: The Fourier-Galerkin method (in short FFTH) has gained popularity in numerical homogenisation because it can treat problems with a huge number of degrees of freedom. Because the method incorporates the fast Fourier transform (FFT) in the linear solver, it is believed to provide an improvement in computational and memory requirements compared to the conventional finite element method (FEM). Here, w… ▽ More The Fourier-Galerkin method (in short FFTH) has gained popularity in numerical homogenisation because it can treat problems with a huge number of degrees of freedom. Because the method incorporates the fast Fourier transform (FFT) in the linear solver, it is believed to provide an improvement in computational and memory requirements compared to the conventional finite element method (FEM). Here, we systematically compare these two methods using the energetic norm of local fields, which has the clear physical interpretation as being the error in the homogenised properties. This enables the comparison of memory and computational requirements at the same level of approximation accuracy. We show that the methods' effectiveness relies on the smoothness (regularity) of the solution and thus on the material coefficients. Thanks to its approximation properties, FEM outperforms FFTH for problems with jumps in material coefficients, while ambivalent results are observed for the case that the material coefficients vary continuously in space. FFTH profits from a good conditioning of the linear system, independent of the number of degrees of freedom, but generally needs more degrees of freedom to reach the same approximation accuracy. More studies are needed for other FFT-based schemes, non-linear problems, and dual problems (which require special treatment in FEM but not in FFTH). △ Less

Submitted 16 November, 2019; v1 submitted 25 September, 2017; originally announced September 2017.

Comments: 24 pages, 10 figures, 2 tables

Journal ref: Journal of Computational and Applied Mathematics, 374 (2020), 112585

Fracture initiation in multi-phase materials: a systematic three-dimensional approach using a FFT-based solver

Authors: T. W. J. de Geus, M. Cottura, B. Appolaire, R. H. J. Peerlings, M. G. D. Geers

Abstract: This paper studies a two-phase material with a microstructure composed of a hard brittle reinforcement phase embedded in a soft ductile matrix. It addresses the full three-dimensional nature of the microstructure and macroscopic deformation. A large ensemble of periodic microstructures is used, whereby the individual grains of the two phases are modeled using equi-sized cubes. A particular solutio… ▽ More This paper studies a two-phase material with a microstructure composed of a hard brittle reinforcement phase embedded in a soft ductile matrix. It addresses the full three-dimensional nature of the microstructure and macroscopic deformation. A large ensemble of periodic microstructures is used, whereby the individual grains of the two phases are modeled using equi-sized cubes. A particular solution strategy relying on the Fast Fourier Transform is adopted, which has a high computational efficiency both in terms of speed and memory footprint, thus enabling a statistically meaningful analysis. This solution method naturally accompanies the regular microstructural model, as the Fast Fourier Transform relies on a regular grid. Using the many considered microstructures as an ensemble, the average arrangement of phases around fracture initiation sites is objectively identified by the correlation between microstructure and fracture initiation -- in three dimensions. The results show that fracture initiates where regions of the hard phase are interrupted by bands of the soft phase that are aligned with the direction of maximum shear. In such regions, the hard phase is arranged such that the area of the phase boundary perpendicular to the principal strain direction is maximum, leading to high hydrostatic tensile stresses, while not interrupting the shear bands that form in the soft phase. The local incompatibility that is present around the shear bands is responsible for a high plastic strain. By comparing the response to a two-dimensional microstructure it is observed that the response is qualitatively similar (both macroscopically and microscopically). One important difference is that the local strain partitioning between the two phases is over-predicted by the two-dimensional microstructure, leading to an overestimation of damage. △ Less

Submitted 13 April, 2016; originally announced April 2016.

Journal ref: Mechanics of Materials, 97:199--211, 2016

Systematic and objective identification of the microstructure around damage directly from images

Authors: T. W. J. de Geus, C. Du, J. P. M. Hoefnagels, R. H. J. Peerlings, M. G. D. Geers

Abstract: An original experimental approach is presented to automatically determine the average phase distribution around damage sites in multi-phase materials. An objective measure is found to be the average intensity around damage sites, calculated using many images. This method has the following benefits: no phase identification or manual interventions are required, and statistical fluctuations and measu… ▽ More An original experimental approach is presented to automatically determine the average phase distribution around damage sites in multi-phase materials. An objective measure is found to be the average intensity around damage sites, calculated using many images. This method has the following benefits: no phase identification or manual interventions are required, and statistical fluctuations and measurement noise are effectively averaged. The method is demonstrated for dual-phase steel, revealing subtle unexpected differences in the morphology surrounding damage in strongly and weakly banded microstructures. △ Less

Submitted 13 April, 2016; originally announced April 2016.

Journal ref: Scripta Materialia, 2016, 113:101-105

Microstructural modeling of ductile fracture initiation in multi-phase materials

Authors: T. W. J. de Geus, R. H. J. Peerlings, M. G. D. Geers

Abstract: The precise mechanisms underlying the failure of multi-phase materials may be strongly dependent on the material's microstructural morphology. Micromechanical modeling has provided much insight into this dependence, but uncertainties remain about crucial modeling assumptions. This paper assesses the influence of different grain shapes, damage indicators, and stress states using a structured numeri… ▽ More The precise mechanisms underlying the failure of multi-phase materials may be strongly dependent on the material's microstructural morphology. Micromechanical modeling has provided much insight into this dependence, but uncertainties remain about crucial modeling assumptions. This paper assesses the influence of different grain shapes, damage indicators, and stress states using a structured numerical model. A distinct spatial arrangement of phases around fracture incidents is found, consisting of hard regions in the tensile direction interrupted by soft regions in the directions of shear. These key features are only mildly sensitive to the studied variations. △ Less

Submitted 13 April, 2016; originally announced April 2016.

Journal ref: Engineering Fracture Mechanics, 2015, 147:318-330

Topology and morphology influences on the onset of ductile failure in a two-phase microstructure

Authors: T. W. J. de Geus, R. H. J. Peerlings, M. G. D. Geers

Abstract: Multi-phase material are frequently applied in a wide variety of products, as they posses a unique set of properties by combining two or more distinct phases at the level of the microstructure. Although the macroscopic stiffness and hardening are reasonably well understood, questions remain about the dominant failure mechanism(s). We identify the role of the microstructural topology (the distribut… ▽ More Multi-phase material are frequently applied in a wide variety of products, as they posses a unique set of properties by combining two or more distinct phases at the level of the microstructure. Although the macroscopic stiffness and hardening are reasonably well understood, questions remain about the dominant failure mechanism(s). We identify the role of the microstructural topology (the distribution of phases) on damage "hot-spot" in the microstructure, by performing a numerical study on a large set of randomly generated topologies. The result identifies a distinct probability distribution of phases around a typical damage "hot-spot". This work is focused on assessing the sensitivity of the result to the assumptions made on the microstructural geometry. △ Less

Submitted 12 April, 2016; originally announced April 2016.

Journal ref: Procedia Materials Science, 2014, 3:598-603

Microstructural topology effects on the onset of ductile failure in multi-phase materials - a systematic computational approach

Authors: T. W. J. de Geus, R. H. J. Peerlings, M. G. D. Geers

Abstract: Multi-phase materials are key for modern engineering applications. They are generally characterized by a high strength and ductility. Many of these materials fail by ductile fracture of the, generally softer, matrix phase. In this work we systematically study the influence of the arrangement of the phases by correlating the microstructure of a two-phase material to the onset of ductile failure. A… ▽ More Multi-phase materials are key for modern engineering applications. They are generally characterized by a high strength and ductility. Many of these materials fail by ductile fracture of the, generally softer, matrix phase. In this work we systematically study the influence of the arrangement of the phases by correlating the microstructure of a two-phase material to the onset of ductile failure. A single topological feature is identified in which critical levels of damage are consistently indicated. It consists of a small region of the matrix phase with particles of the hard phase on both sides in a direction that depends on the applied deformation. Due to this configuration, a large tensile hydrostatic stress and plastic strain is observed inside the matrix, indicating high damage. This topological feature has, to some extent, been recognized before for certain multi-phase materials. This study however provides insight in the mechanics involved, including the influence of the loading conditions and the arrangement of the phases in the material surrounding the feature. Furthermore, a parameter study is performed to explore the influence of volume fraction and hardness of the inclusion phase. For the same macroscopic hardening response, the ductility is predicted to increase if the volume fraction of the hard phase increases while at the same time its hardness decreases. △ Less

Submitted 11 April, 2016; originally announced April 2016.

Journal ref: International Journal of Solids and Structures, 2015, 67-68:326-339

An analysis of the pile-up of infinite periodic walls of edge dislocations

Authors: T. W. J. de Geus, R. H. J. Peerlings, C. B. Hirschberger

Abstract: We analyse the equilibrium pile-up configurations of infinite periodic walls of edge dislocations which are forced against an impenetrable obstacle by a constant applied shear stress. Numerically generated density distributions exhibit two distinct regions, for each of which we provide an interpretation and an analytical prediction. Near the obstacle, the influence of neighbouring slip planes may… ▽ More We analyse the equilibrium pile-up configurations of infinite periodic walls of edge dislocations which are forced against an impenetrable obstacle by a constant applied shear stress. Numerically generated density distributions exhibit two distinct regions, for each of which we provide an interpretation and an analytical prediction. Near the obstacle, the influence of neighbouring slip planes may be neglected and the classical solution for a single slip plane applies. At a larger distance a linear decay is obtained. The characteristic length scales of the two parts of the pile-up are shown to depend differently on the parameters of the problem. △ Less

Submitted 11 April, 2016; originally announced April 2016.

Journal ref: Mechanics Research Communications, 54:7-13, 2013

Fracture in multi-phase materials: why some microstructures are more critical than others

Authors: T. W. J. de Geus, R. H. J. Peerlings, M. G. D. Geers

Abstract: Our goal is to unravel the mechanisms that lead to failure of a ductile two-phase material - that consists of a ductile soft phase and a relatively brittle hard phase. An idealized microstructural model is used to study damage propagation systematically and transparently. The analysis uncovers distinct microstructural features around early voids, whereby regions of the hard phase are aligned with… ▽ More Our goal is to unravel the mechanisms that lead to failure of a ductile two-phase material - that consists of a ductile soft phase and a relatively brittle hard phase. An idealized microstructural model is used to study damage propagation systematically and transparently. The analysis uncovers distinct microstructural features around early voids, whereby regions of the hard phase are aligned with the tensile axis and regions of the soft phase are aligned with the shear directions. These features are consistently found in regions exhibiting damage propagation, whereby the damage remains initiation driven, i.e. voids nucleate independently of each other. Upon localization, damage is controlled on a longer length-scale relying on a critical relative position of 'initiation hot-spots'. The damage rapidly increases in bands of the soft phase wherein several voids are aligned with the shear directions. The relative arrangement of the voids determines whether the microstructure fails early, or at a substantially higher strain. Although much research is needed to refine these findings for real or more realistic microstructures, in particular in three-dimensions, this paper opens a route to a deeper understanding of the ultimate failure of multi-phase materials. △ Less

Submitted 19 December, 2016; v1 submitted 29 March, 2016; originally announced March 2016.

Journal ref: Engineering Fracture Mechanics, 169:354-370, 2017

Fracture initiation in multi-phase materials: a statistical characterization of microstructural damage sites

Authors: T. W. J. de Geus, J. E. P. van Duuren, R. H. J. Peerlings, M. G. D. Geers

Abstract: Understanding the microstructural influence on the failure mechanisms in multi-phase materials calls for the identification of the worst-case scenario. This necessitates a statistical approach. By performing simulations directly based on micrographs, such an approach becomes feasible. This is applied here to extract the average microstructure around damage sites. Understanding the microstructural influence on the failure mechanisms in multi-phase materials calls for the identification of the worst-case scenario. This necessitates a statistical approach. By performing simulations directly based on micrographs, such an approach becomes feasible. This is applied here to extract the average microstructure around damage sites. △ Less

Submitted 5 December, 2016; v1 submitted 29 March, 2016; originally announced March 2016.

Journal ref: Materials Science and Engineering: A, 2016, 673:551-556

Finite strain FFT-based non-linear solvers made simple

Authors: T. W. J. de Geus, J. Vondrejc, J. Zeman, R. H. J. Peerlings, M. G. D. Geers

Abstract: Computational micromechanics and homogenization require the solution of the mechanical equilibrium of a periodic cell that comprises a (generally complex) microstructure. Techniques that apply the Fast Fourier Transform have attracted much attention as they outperform other methods in terms of speed and memory footprint. Moreover, the Fast Fourier Transform is a natural companion of pixel-based di… ▽ More Computational micromechanics and homogenization require the solution of the mechanical equilibrium of a periodic cell that comprises a (generally complex) microstructure. Techniques that apply the Fast Fourier Transform have attracted much attention as they outperform other methods in terms of speed and memory footprint. Moreover, the Fast Fourier Transform is a natural companion of pixel-based digital images which often serve as input. In its original form, one of the biggest challenges for the method is the treatment of (geometrically) non-linear problems, partially due to the need for a uniform linear reference problem. In a geometrically linear setting, the problem has recently been treated in a variational form resulting in an unconditionally stable scheme that combines Newton iterations with an iterative linear solver, and therefore exhibits robust and quadratic convergence behavior. Through this approach, well-known key ingredients were recovered in terms of discretization, numerical quadrature, consistent linearization of the material model, and the iterative solution of the resulting linear system. As a result, the extension to finite strains, using arbitrary constitutive models, is at hand. Because of the application of the Fast Fourier Transform, the implementation is substantially easier than that of other (Finite Element) methods. Both claims are demonstrated in this paper and substantiated with a simple code in Python of just 59 lines (without comments). The aim is to render the method transparent and accessible, whereby researchers that are new to this method should be able to implement it efficiently. The potential of this method is demonstrated using two examples, each with a different material model. △ Less

Submitted 20 February, 2017; v1 submitted 29 March, 2016; originally announced March 2016.

Journal ref: Computer Methods in Applied Mechanics and Engineering, 318:412-430 (2017)

Microscopic plasticity and damage in two-phase steels: on the competing role of crystallography and phase contrast

Authors: T. W. J. de Geus, F. Maresca, R. H. J. Peerlings, M. G. D. Geers

Abstract: This paper unravels micromechanical aspects of metallic materials whose microstructure comprises grains of two or more phases. The local plastic response is determined by (i) the relative misorientation of the slip systems of individual grains, and (ii) the different mechanical properties of the phases. The relative importance of these two mechanisms at the meso-scale is unclear: is the plastic re… ▽ More This paper unravels micromechanical aspects of metallic materials whose microstructure comprises grains of two or more phases. The local plastic response is determined by (i) the relative misorientation of the slip systems of individual grains, and (ii) the different mechanical properties of the phases. The relative importance of these two mechanisms at the meso-scale is unclear: is the plastic response dominated by the grain's anisotropy, or is this effect overwhelmed by the mechanical contrast between the two phases? The answer impacts the modeling of such a material at the meso-scale, but also gives insights in the resulting fracture mechanisms at that length-scale. Until now, this question has been addressed only for particular crystallographies and mechanical properties. In contrast, this paper studies the issue systematically using a large set of phase distributions, crystallographies, and material parameters. It is found that the macroscopic and the mesoscopic (grain-averaged) plastic response of the two extreme modeling choices (crystal plasticity or isotropic plasticity) converge with increasing phase contrast. The effect of the crystallography is completely overwhelmed by the phase contrast when the yield stress of the hard phase is a factor of four higher compared to the soft phase. When this ratio is lower than two, its influence may not be neglected. However, even in this regime, fracture initiation is controlled by the local arrangement of the phases. The latter is quantified in this paper through the average arrangement of the phases around fracture initiation sites. △ Less

Submitted 5 December, 2016; v1 submitted 18 March, 2016; originally announced March 2016.

Journal ref: Mechanics of Materials, 2016, 101:147-159

Competing damage mechanisms in a two-phase microstructure: how microstructure and loading conditions determine the onset of fracture

Authors: T. W. J. de Geus, R. H. J. Peerlings, M. G. D. Geers

Abstract: This paper studies the competition of fracture initiation in the ductile soft phase and in the comparatively brittle hard phase in the microstructure of a two-phase material. A simple microstructural model is used to predict macroscopic fracture initiation. The simplicity of the model ensures highly efficient computations, enabling an comprehensive study: a large range of hard phase volume fractio… ▽ More This paper studies the competition of fracture initiation in the ductile soft phase and in the comparatively brittle hard phase in the microstructure of a two-phase material. A simple microstructural model is used to predict macroscopic fracture initiation. The simplicity of the model ensures highly efficient computations, enabling an comprehensive study: a large range of hard phase volume fractions and yield stress ratios, for wide range of applied stress states. Each combination of these parameters is analyzed using a large set of (random) microstructures. It is observed that only one of the phases dominates macroscopic fracture initiation: at low stress triaxiality the soft phase is dominant, but above a critical triaxiality the hard phase takes over resulting in a strong decrease in ductility. This transition is strongly dependent on microstructural parameters. If the hard phase volume fraction is small, the fracture initiation is dominated by the soft phase even at high phase contrast. At higher hard phase volume fraction, the hard phase dominates already at low phase contrast. This simple model thereby reconciles experimental observations from the literature for a specific combination of parameters, which may have triggered contradictory statements in the past. A microscopic analysis reveals that the average phase distribution around fracture initiation sites is nearly the same for the two failure mechanisms. Along the tensile direction, regions of the hard phase are found directly next to the fracture initiation site. This `band' of hard phase is intersected through the fracture initiation site by `bands' of the soft phase aligned with shear. Clearly, the local mechanical incompatibility is dominant for the initiation of fracture, regardless whether fracture initiates in the soft or in the hard phase. △ Less

Submitted 5 December, 2016; v1 submitted 18 March, 2016; originally announced March 2016.

Journal ref: International Journal of Solids and Structures, 2016, 97-98, 687-698

A finite element perspective on non-linear FFT-based micromechanical simulations

Authors: Jan Zeman, Tom W. J. de Geus, Jaroslav Vondřejc, Ron H. J. Peerlings, Marc G. D. Geers

Abstract: Fourier solvers have become efficient tools to establish structure-property relations in heterogeneous materials. Introduced as an alternative to the Finite Element (FE) method, they are based on fixed-point solutions of the Lippmann-Schwinger type integral equation. Their computational efficiency results from handling the kernel of this equation by the Fast Fourier Transform (FFT). However, the k… ▽ More Fourier solvers have become efficient tools to establish structure-property relations in heterogeneous materials. Introduced as an alternative to the Finite Element (FE) method, they are based on fixed-point solutions of the Lippmann-Schwinger type integral equation. Their computational efficiency results from handling the kernel of this equation by the Fast Fourier Transform (FFT). However, the kernel is derived from an auxiliary homogeneous linear problem, which renders the extension of FFT-based schemes to non-linear problems conceptually difficult. This paper aims to establish a link between FE- and FFT-based methods, in order to develop a solver applicable to general history- and time-dependent material models. For this purpose, we follow the standard steps of the FE method, starting from the weak form, proceeding to the Galerkin discretization and the numerical quadrature, up to the solution of non-linear equilibrium equations by an iterative Newton-Krylov solver. No auxiliary linear problem is thus needed. By analyzing a two-phase laminate with non-linear elastic, elasto-plastic, and visco-plastic phases, and by elasto-plastic simulations of a dual-phase steel microstructure, we demonstrate that the solver exhibits robust convergence. These results are achieved by re-using the non-linear FE technology, with the potential of further extensions beyond small-strain inelasticity considered in this paper. △ Less

Submitted 22 January, 2016; originally announced January 2016.

Comments: 27 pages, 9 figures, 3 tables

Journal ref: International Journal for Numerical Methods in Engineering 111 (10), 903--926, (2017)